diff options
Diffstat (limited to 'Documentation/devicetree/bindings/power/reset')
5 files changed, 267 insertions, 27 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml new file mode 100644 index 000000000000..f559a2cfd82e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 SHDWC Shutdown Controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO + and VDDCORE and the wake-up detection on debounced input lines. + +properties: + compatible: + enum: + - atmel,at91sam9260-shdwc + - atmel,at91sam9rl-shdwc + - atmel,at91sam9x5-shdwc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + atmel,wakeup-mode: + description: operation mode of the wakeup mode + $ref: /schemas/types.yaml#/definitions/string + enum: [ none, high, low, any ] + + atmel,wakeup-counter: + description: counter on wake-up 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + atmel,wakeup-rtt-timer: + description: enable real-time timer wake-up + type: boolean + + atmel,wakeup-rtc-timer: + description: enable real-time clock wake-up + type: boolean + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,at91sam9x5-shdwc + then: + properties: + atmel,wakeup-rtt-timer: false + + - if: + properties: + compatible: + contains: + const: atmel,at91sam9260-shdwc + then: + properties: + atmel,wakeup-rtc-timer: false + +additionalProperties: false + +examples: + - | + shdwc: poweroff@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; + }; + +... diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml new file mode 100644 index 000000000000..8c58e12cdb60 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO + and VDDCORE and the wake-up detection on debounced input lines. + +properties: + compatible: + oneOf: + - items: + - const: microchip,sama7g5-shdwc + - const: syscon + - enum: + - atmel,sama5d2-shdwc + - microchip,sam9x60-shdwc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + debounce-delay-us: + description: + Minimum wake-up inputs debouncer period in microseconds. It is usually a + board-related property. + + atmel,wakeup-rtc-timer: + description: enable real-time clock wake-up + type: boolean + + atmel,wakeup-rtt-timer: + description: enable real-time timer wake-up + type: boolean + +patternProperties: + "^input@[0-15]$": + description: + Wake-up input nodes. These are usually described in the "board" part of + the Device Tree. Note also that input 0 is linked to the wake-up pin and + is frequently used. + type: object + properties: + reg: + description: contains the wake-up input index + minimum: 0 + maximum: 15 + + atmel,wakeup-active-high: + description: + The corresponding wake-up input described by the child forces the + wake-up of the core power supply on a high level. The default is to + be active low. + type: boolean + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,sama5d2-shdwc + then: + properties: + atmel,wakeup-rtt-timer: false + +additionalProperties: false + +examples: + - | + shdwc: poweroff@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + debounce-delay-us = <976>; + + input@0 { + reg = <0>; + }; + + input@1 { + reg = <1>; + atmel,wakeup-active-high; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt deleted file mode 100644 index 752d6126d5da..000000000000 --- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt +++ /dev/null @@ -1,26 +0,0 @@ -NVMEM reboot mode driver - -This driver gets reboot mode magic value from reboot-mode driver -and stores it in a NVMEM cell named "reboot-mode". Then the bootloader -can read it and take different action according to the magic -value stored. - -Required properties: -- compatible: should be "nvmem-reboot-mode". -- nvmem-cells: A phandle to the reboot mode provided by a nvmem device. -- nvmem-cell-names: Should be "reboot-mode". - -The rest of the properties should follow the generic reboot-mode description -found in reboot-mode.txt - -Example: - reboot-mode { - compatible = "nvmem-reboot-mode"; - nvmem-cells = <&reboot_mode>; - nvmem-cell-names = "reboot-mode"; - - mode-normal = <0xAAAA5501>; - mode-bootloader = <0xBBBB5500>; - mode-recovery = <0xCCCC5502>; - mode-test = <0xDDDD5503>; - }; diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml new file mode 100644 index 000000000000..14a262bcbf7c --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic NVMEM reboot mode + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + This driver gets the reboot mode magic value from the reboot-mode driver + and stores it in the NVMEM cell named "reboot-mode". The bootloader can + then read it and take different action according to the value. + +properties: + compatible: + const: nvmem-reboot-mode + + nvmem-cells: + description: + A phandle pointing to the nvmem-cells node where the vendor-specific + magic value representing the reboot mode is stored. + maxItems: 1 + + nvmem-cell-names: + items: + - const: reboot-mode + +patternProperties: + "^mode-.+": + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vendor-specific mode value written to the mode register + +required: + - compatible + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml index d96170eecbd2..5e460128b0d1 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - qcom,pm8916-pon + - qcom,pm8941-pon - qcom,pms405-pon - qcom,pm8998-pon - qcom,pmk8350-pon @@ -56,7 +57,6 @@ required: unevaluatedProperties: false allOf: - - $ref: reboot-mode.yaml# - if: properties: compatible: @@ -66,12 +66,30 @@ allOf: - qcom,pms405-pon - qcom,pm8998-pon then: + allOf: + - $ref: reboot-mode.yaml# + + properties: + reg: + maxItems: 1 + reg-names: + items: + - const: pon + + # Special case for pm8941, which doesn't store reset mode + - if: + properties: + compatible: + contains: + const: qcom,pm8941-pon + then: properties: reg: maxItems: 1 reg-names: items: - const: pon + - if: properties: compatible: |