diff options
Diffstat (limited to 'Documentation/devicetree/bindings/power')
26 files changed, 1362 insertions, 453 deletions
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index d30f85cc395e..f005abac7079 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -37,7 +37,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: vpu - const: vapb diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml index a96e6dbf1858..01bdda167eef 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -25,7 +25,9 @@ properties: compatible: enum: - fsl,imx7d-gpc + - fsl,imx8mn-gpc - fsl,imx8mq-gpc + - fsl,imx8mm-gpc reg: maxItems: 1 @@ -54,6 +56,7 @@ properties: Power domain index. Valid values are defined in include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc + include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc maxItems: 1 clocks: @@ -66,6 +69,16 @@ properties: power-supply: true + resets: + description: | + A number of phandles to resets that need to be asserted during + power-up sequencing of the domain. The resets belong to devices + located inside the power domain, which need to be held in reset + across the power-up sequence. So no means to specify what each + reset is in a generic power-domain binding. + minItems: 1 + maxItems: 4 + required: - '#power-domain-cells' - reg diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index aed51e9dcb11..3143ed9a3313 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -46,7 +46,7 @@ properties: Phandles to the OPP tables of power domains provided by a power domain provider. If the provider provides a single power domain only or all the power domains provided by the provider have identical OPP tables, - then this shall contain a single phandle. Refer to ../opp/opp.txt + then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml for more information. "#power-domain-cells": diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index ff21bfef8204..239f37881cae 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,mdm9607-rpmpd - qcom,msm8916-rpmpd - qcom,msm8939-rpmpd - qcom,msm8976-rpmpd @@ -26,8 +27,10 @@ properties: - qcom,sdm660-rpmpd - qcom,sc7180-rpmhpd - qcom,sc7280-rpmhpd + - qcom,sc8180x-rpmhpd - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd + - qcom,sm6115-rpmpd - qcom,sm8150-rpmhpd - qcom,sm8250-rpmhpd - qcom,sm8350-rpmhpd diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml new file mode 100644 index 000000000000..84ddc772b003 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/G2L System Controller (SYSC) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/G2L System Controller (SYSC) performs system control of the LSI and + supports following functions, + - External terminal state capture function + - 34-bit address space access function + - Low power consumption control + - WDT stop control + +properties: + compatible: + enum: + - renesas,r9a07g044-sysc # RZ/G2{L,LC} + + reg: + maxItems: 1 + + interrupts: + items: + - description: CA55/CM33 Sleep/Software Standby Mode request interrupt + - description: CA55 Software Standby Mode release request interrupt + - description: CM33 Software Standby Mode release request interrupt + - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt + + interrupt-names: + items: + - const: lpm_int + - const: ca55stbydone_int + - const: cm33stbyr_int + - const: ca55_deny + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g044-sysc"; + reg = <0x11020000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int", + "ca55_deny"; + }; diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt deleted file mode 100644 index 49aba15dff8b..000000000000 --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt +++ /dev/null @@ -1,100 +0,0 @@ -DT bindings for the Renesas R-Mobile System Controller - -== System Controller Node == - -The R-Mobile System Controller provides the following functions: - - Boot mode management, - - Reset generation, - - Power management. - -Required properties: -- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as - fallback. - Examples with soctypes are: - - "renesas,sysc-r8a73a4" (R-Mobile APE6) - - "renesas,sysc-r8a7740" (R-Mobile A1) - - "renesas,sysc-sh73a0" (SH-Mobile AG5) -- reg: Two address start and address range blocks for the device: - - The first block refers to the normally accessible registers, - - the second block refers to the registers protected by the HPB - semaphore. - -Optional nodes: -- pm-domains: This node contains a hierarchy of PM domain nodes, which should - match the Power Area Hierarchy in the Power Domain Specifications section of - the device's datasheet. - - -== PM Domain Nodes == - -Each of the PM domain nodes represents a PM domain, as documented by the -generic PM domain bindings in -Documentation/devicetree/bindings/power/power-domain.yaml. - -The nodes should be named by the real power area names, and thus their names -should be unique. - -Required properties: - - #power-domain-cells: Must be 0. - -Optional properties: -- reg: If the PM domain is not always-on, this property must contain the bit - index number for the corresponding power area in the various Power - Control and Status Registers. The parent's node must contain the - following two properties: - - #address-cells: Must be 1, - - #size-cells: Must be 0. - If the PM domain is always-on, this property must be omitted. - - -Example: - -This shows a subset of the r8a7740 PM domain hierarchy, containing the -C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain, -which is a subdomain of A4S. - - sysc: system-controller@e6180000 { - compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile"; - reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; - - pm-domains { - pd_c5: c5 { - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - pd_a4s: a4s@10 { - reg = <10>; - #address-cells = <1>; - #size-cells = <0>; - #power-domain-cells = <0>; - - pd_a3sp: a3sp@11 { - reg = <11>; - #power-domain-cells = <0>; - }; - }; - - pd_a4su: a4su@20 { - reg = <20>; - #power-domain-cells = <0>; - }; - }; - }; - }; - - -== PM Domain Consumers == - -Hardware blocks belonging to a PM domain should contain a "power-domains" -property that is a phandle pointing to the corresponding PM domain node. - -Example: - - tpu: pwm@e6600000 { - compatible = "renesas,tpu-r8a7740", "renesas,tpu"; - reg = <0xe6600000 0x100>; - clocks = <&mstp3_clks R8A7740_CLK_TPU0>; - power-domains = <&pd_a3sp>; - #pwm-cells = <3>; - }; diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml new file mode 100644 index 000000000000..559718997de7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/renesas,sysc-rmobile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Mobile System Controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: | + The R-Mobile System Controller provides the following functions: + - Boot mode management, + - Reset generation, + - Power management. + +properties: + compatible: + items: + - enum: + - renesas,sysc-r8a73a4 # R-Mobile APE6 + - renesas,sysc-r8a7740 # R-Mobile A1 + - renesas,sysc-sh73a0 # SH-Mobile AG5 + - const: renesas,sysc-rmobile # Generic SH/R-Mobile + + reg: + items: + - description: Normally accessible register block + - description: Register block protected by the HPB semaphore + + pm-domains: + type: object + description: | + This node contains a hierarchy of PM domain nodes, which should match the + Power Area Hierarchy in the Power Domain Specifications section of the + device's datasheet. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + additionalProperties: + $ref: "#/$defs/pd-node" + +required: + - compatible + - reg + - pm-domains + +additionalProperties: false + +$defs: + pd-node: + type: object + description: + PM domain node representing a PM domain. This node hould be named by + the real power area name, and thus its name should be unique. + + properties: + reg: + maxItems: 1 + description: + If the PM domain is not always-on, this property must contain the + bit index number for the corresponding power area in the various + Power Control and Status Registers. + If the PM domain is always-on, this property must be omitted. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#power-domain-cells': + const: 0 + + required: + - '#power-domain-cells' + + additionalProperties: + $ref: "#/$defs/pd-node" + +examples: + - | + // This shows a subset of the r8a7740 PM domain hierarchy, containing the + // C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP + // domain, which is a subdomain of A4S. + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile"; + reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a4s: a4s@10 { + reg = <10>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sp: a3sp@11 { + reg = <11>; + #power-domain-cells = <0>; + }; + }; + + pd_a4su: a4su@20 { + reg = <20>; + #power-domain-cells = <0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt deleted file mode 100644 index 0c0dc3a1e693..000000000000 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt +++ /dev/null @@ -1,49 +0,0 @@ -Qualcomm PON Device - -The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey -and resin along with the Android reboot-mode. - -This DT node has pwrkey and resin as sub nodes. - -Required Properties: --compatible: Must be one of: - "qcom,pm8916-pon" - "qcom,pms405-pon" - "qcom,pm8998-pon" - --reg: Specifies the physical address of the pon register - -Optional subnode: --pwrkey: Specifies the subnode pwrkey and should follow the - qcom,pm8941-pwrkey.txt description. --resin: Specifies the subnode resin and should follow the - qcom,pm8xxx-pwrkey.txt description. - -The rest of the properties should follow the generic reboot-mode description -found in reboot-mode.txt - -Example: - - pon@800 { - compatible = "qcom,pm8916-pon"; - - reg = <0x800>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_POWER>; - }; - - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml new file mode 100644 index 000000000000..353f155df0f4 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PON Device + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey + and resin along with the Android reboot-mode. + + This DT node has pwrkey and resin as sub nodes. + +allOf: + - $ref: reboot-mode.yaml# + +properties: + compatible: + enum: + - qcom,pm8916-pon + - qcom,pms405-pon + - qcom,pm8998-pon + + reg: + maxItems: 1 + + pwrkey: + type: object + $ref: "../../input/qcom,pm8941-pwrkey.yaml#" + + resin: + type: object + $ref: "../../input/qcom,pm8941-pwrkey.yaml#" + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/spmi/spmi.h> + spmi_bus: spmi@c440000 { + reg = <0x0c440000 0x1100>; + #address-cells = <2>; + #size-cells = <0>; + pmk8350: pmic@0 { + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + pmk8350_pon: pon_hlos@1300 { + reg = <0x1300>; + compatible = "qcom,pm8998-pon"; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml index 9c6fda6b1dd9..ad0a0b95cec1 100644 --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -36,7 +36,7 @@ patternProperties: "^mode-.*$": $ref: /schemas/types.yaml#/definitions/uint32 -additionalProperties: false +additionalProperties: true examples: - | diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt deleted file mode 100644 index bb529ecf8a57..000000000000 --- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt +++ /dev/null @@ -1,61 +0,0 @@ --------------------------------------------------------------------- -Device Tree Bindings for the Xilinx Zynq MPSoC Power Management --------------------------------------------------------------------- -The zynqmp-power node describes the power management configurations. -It will control remote suspend/shutdown interfaces. - -Required properties: - - compatible: Must contain: "xlnx,zynqmp-power" - - interrupts: Interrupt specifier - -Optional properties: - - mbox-names : Name given to channels seen in the 'mboxes' property. - "tx" - Mailbox corresponding to transmit path - "rx" - Mailbox corresponding to receive path - - mboxes : Standard property to specify a Mailbox. Each value of - the mboxes property should contain a phandle to the - mailbox controller device node and an args specifier - that will be the phandle to the intended sub-mailbox - child node to be used for communication. See - Documentation/devicetree/bindings/mailbox/mailbox.txt - for more details about the generic mailbox controller - and client driver bindings. Also see - Documentation/devicetree/bindings/mailbox/ \ - xlnx,zynqmp-ipi-mailbox.txt for typical controller that - is used to communicate with this System controllers. - --------- -Examples --------- - -Example with interrupt method: - -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - zynqmp_power: zynqmp-power { - compatible = "xlnx,zynqmp-power"; - interrupts = <0 35 4>; - }; - }; -}; - -Example with IPI mailbox method: - -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - zynqmp_power: zynqmp-power { - compatible = "xlnx,zynqmp-power"; - interrupt-parent = <&gic>; - interrupts = <0 35 4>; - mboxes = <&ipi_mailbox_pmu0 0>, - <&ipi_mailbox_pmu0 1>; - mbox-names = "tx", "rx"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml new file mode 100644 index 000000000000..68d7c14a7163 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-power.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq MPSoC Power Management Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +description: | + The zynqmp-power node describes the power management configurations. + It will control remote suspend/shutdown interfaces. + +properties: + compatible: + const: "xlnx,zynqmp-power" + + interrupts: + maxItems: 1 + + mboxes: + description: | + Standard property to specify a Mailbox. Each value of + the mboxes property should contain a phandle to the + mailbox controller device node and an args specifier + that will be the phandle to the intended sub-mailbox + child node to be used for communication. See + Documentation/devicetree/bindings/mailbox/mailbox.txt + for more details about the generic mailbox controller + and client driver bindings. Also see + Documentation/devicetree/bindings/mailbox/ \ + xlnx,zynqmp-ipi-mailbox.txt for typical controller that + is used to communicate with this System controllers. + items: + - description: tx channel + - description: rx channel + + mbox-names: + description: + Name given to channels seen in the 'mboxes' property. + items: + - const: tx + - const: rx + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + - |+ + + // Example with interrupt method: + + firmware { + zynqmp-firmware { + zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupts = <0 35 4>; + }; + }; + }; + + - |+ + + // Example with IPI mailbox method: + + firmware { + zynqmp-firmware { + zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupt-parent = <&gic>; + interrupts = <0 35 4>; + mboxes = <&ipi_mailbox_pmu1 0>, + <&ipi_mailbox_pmu1 1>; + mbox-names = "tx", "rx"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml new file mode 100644 index 000000000000..9b9d71087466 --- /dev/null +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Power Domains + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + Rockchip processors include support for multiple power domains + which can be powered up/down by software based on different + application scenarios to save power. + + Power domains contained within power-controller node are + generic power domain providers documented in + Documentation/devicetree/bindings/power/power-domain.yaml. + + IP cores belonging to a power domain should contain a + "power-domains" property that is a phandle for the + power domain node representing the domain. + +properties: + $nodename: + const: power-controller + + compatible: + enum: + - rockchip,px30-power-controller + - rockchip,rk3036-power-controller + - rockchip,rk3066-power-controller + - rockchip,rk3128-power-controller + - rockchip,rk3188-power-controller + - rockchip,rk3228-power-controller + - rockchip,rk3288-power-controller + - rockchip,rk3328-power-controller + - rockchip,rk3366-power-controller + - rockchip,rk3368-power-controller + - rockchip,rk3399-power-controller + - rockchip,rk3568-power-controller + + "#power-domain-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - "#power-domain-cells" + +additionalProperties: false + +patternProperties: + "^power-domain@[0-9a-f]+$": + + $ref: "#/$defs/pd-node" + + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^power-domain@[0-9a-f]+$": + + $ref: "#/$defs/pd-node" + + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^power-domain@[0-9a-f]+$": + + $ref: "#/$defs/pd-node" + + unevaluatedProperties: false + + properties: + "#power-domain-cells": + const: 0 + +$defs: + pd-node: + type: object + description: | + Represents the power domains within the power controller node. + + properties: + reg: + maxItems: 1 + description: | + Power domain index. Valid values are defined in + "include/dt-bindings/power/px30-power.h" + "include/dt-bindings/power/rk3036-power.h" + "include/dt-bindings/power/rk3066-power.h" + "include/dt-bindings/power/rk3128-power.h" + "include/dt-bindings/power/rk3188-power.h" + "include/dt-bindings/power/rk3228-power.h" + "include/dt-bindings/power/rk3288-power.h" + "include/dt-bindings/power/rk3328-power.h" + "include/dt-bindings/power/rk3366-power.h" + "include/dt-bindings/power/rk3368-power.h" + "include/dt-bindings/power/rk3399-power.h" + "include/dt-bindings/power/rk3568-power.h" + + clocks: + minItems: 1 + maxItems: 30 + description: | + A number of phandles to clocks that need to be enabled + while power domain switches state. + + pm_qos: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + A number of phandles to qos blocks which need to be saved and restored + while power domain switches state. + + "#power-domain-cells": + enum: [0, 1] + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + required: + - reg + - "#power-domain-cells" + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/power/rk3399-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + qos_hdcp: qos@ffa90000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa90000 0x0 0x20>; + }; + + qos_iep: qos@ffa98000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa98000 0x0 0x20>; + }; + + qos_rga_r: qos@ffab0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab0000 0x0 0x20>; + }; + + qos_rga_w: qos@ffab0080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab0080 0x0 0x20>; + }; + + qos_video_m0: qos@ffab8000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab8000 0x0 0x20>; + }; + + qos_video_m1_r: qos@ffac0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffac0000 0x0 0x20>; + }; + + qos_video_m1_w: qos@ffac0080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffac0080 0x0 0x20>; + }; + + power-management@ff310000 { + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff310000 0x0 0x1000>; + + power-controller { + compatible = "rockchip,rk3399-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_CENTER */ + power-domain@RK3399_PD_IEP { + reg = <RK3399_PD_IEP>; + clocks = <&cru ACLK_IEP>, + <&cru HCLK_IEP>; + pm_qos = <&qos_iep>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_RGA { + reg = <RK3399_PD_RGA>; + clocks = <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_rga_r>, + <&qos_rga_w>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VCODEC { + reg = <RK3399_PD_VCODEC>; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + pm_qos = <&qos_video_m0>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VDU { + reg = <RK3399_PD_VDU>; + clocks = <&cru ACLK_VDU>, + <&cru HCLK_VDU>; + pm_qos = <&qos_video_m1_r>, + <&qos_video_m1_w>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VIO { + reg = <RK3399_PD_VIO>; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3399_PD_HDCP { + reg = <RK3399_PD_HDCP>; + clocks = <&cru ACLK_HDCP>, + <&cru HCLK_HDCP>, + <&cru PCLK_HDCP>; + pm_qos = <&qos_hdcp>; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt deleted file mode 100644 index e66fd4eab71c..000000000000 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ /dev/null @@ -1,135 +0,0 @@ -Rockchip SRAM for IO Voltage Domains: -------------------------------------- - -IO domain voltages on some Rockchip SoCs are variable but need to be -kept in sync between the regulators and the SoC using a special -register. - -A specific example using rk3288: -- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then - bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to - that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1. - -Said another way, this driver simply handles keeping bits in the SoC's -general register file (GRF) in sync with the actual value of a voltage -hooked up to the pins. - -Note that this driver specifically doesn't include: -- any logic for deciding what voltage we should set regulators to -- any logic for deciding whether regulators (or internal SoC blocks) - should have power or not have power - -If there were some other software that had the smarts of making -decisions about regulators, it would work in conjunction with this -driver. When that other software adjusted a regulator's voltage then -this driver would handle telling the SoC about it. A good example is -vqmmc for SD. In that case the dw_mmc driver simply is told about a -regulator. It changes the regulator between 3.3V and 1.8V at the -right time. This driver notices the change and makes sure that the -SoC is on the same page. - - -Required properties: -- compatible: should be one of: - - "rockchip,px30-io-voltage-domain" for px30 - - "rockchip,px30-pmu-io-voltage-domain" for px30 pmu-domains - - "rockchip,rk3188-io-voltage-domain" for rk3188 - - "rockchip,rk3228-io-voltage-domain" for rk3228 - - "rockchip,rk3288-io-voltage-domain" for rk3288 - - "rockchip,rk3328-io-voltage-domain" for rk3328 - - "rockchip,rk3368-io-voltage-domain" for rk3368 - - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - - "rockchip,rk3399-io-voltage-domain" for rk3399 - - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains - - "rockchip,rv1108-io-voltage-domain" for rv1108 - - "rockchip,rv1108-pmu-io-voltage-domain" for rv1108 pmu-domains - -Deprecated properties: -- rockchip,grf: phandle to the syscon managing the "general register files" - Systems should move the io-domains to a sub-node of the grf simple-mfd. - -You specify supplies using the standard regulator bindings by including -a phandle the relevant regulator. All specified supplies must be able -to report their voltage. The IO Voltage Domain for any non-specified -supplies will be not be touched. - -Possible supplies for PX30: -- vccio6-supply: The supply connected to VCCIO6. -- vccio1-supply: The supply connected to VCCIO1. -- vccio2-supply: The supply connected to VCCIO2. -- vccio3-supply: The supply connected to VCCIO3. -- vccio4-supply: The supply connected to VCCIO4. -- vccio5-supply: The supply connected to VCCIO5. -- vccio-oscgpi-supply: The supply connected to VCCIO_OSCGPI. - -Possible supplies for PX30 pmu-domains: -- pmuio1-supply: The supply connected to PMUIO1. -- pmuio2-supply: The supply connected to PMUIO2. - -Possible supplies for rk3188: -- ap0-supply: The supply connected to AP0_VCC. -- ap1-supply: The supply connected to AP1_VCC. -- cif-supply: The supply connected to CIF_VCC. -- flash-supply: The supply connected to FLASH_VCC. -- lcdc0-supply: The supply connected to LCD0_VCC. -- lcdc1-supply: The supply connected to LCD1_VCC. -- vccio0-supply: The supply connected to VCCIO0. -- vccio1-supply: The supply connected to VCCIO1. - Sometimes also labeled VCCIO1 and VCCIO2. - -Possible supplies for rk3228: -- vccio1-supply: The supply connected to VCCIO1. -- vccio2-supply: The supply connected to VCCIO2. -- vccio3-supply: The supply connected to VCCIO3. -- vccio4-supply: The supply connected to VCCIO4. - -Possible supplies for rk3288: -- audio-supply: The supply connected to APIO4_VDD. -- bb-supply: The supply connected to APIO5_VDD. -- dvp-supply: The supply connected to DVPIO_VDD. -- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC -- flash1-supply: The supply connected to FLASH1_VDD. Also known as SDIO1. -- gpio30-supply: The supply connected to APIO1_VDD. -- gpio1830 The supply connected to APIO2_VDD. -- lcdc-supply: The supply connected to LCDC_VDD. -- sdcard-supply: The supply connected to SDMMC0_VDD. -- wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0. - -Possible supplies for rk3368: -- audio-supply: The supply connected to APIO3_VDD. -- dvp-supply: The supply connected to DVPIO_VDD. -- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC -- gpio30-supply: The supply connected to APIO1_VDD. -- gpio1830 The supply connected to APIO4_VDD. -- sdcard-supply: The supply connected to SDMMC0_VDD. -- wifi-supply: The supply connected to APIO2_VDD. Also known as SDIO0. - -Possible supplies for rk3368 pmu-domains: -- pmu-supply: The supply connected to PMUIO_VDD. -- vop-supply: The supply connected to LCDC_VDD. - -Possible supplies for rk3399: -- bt656-supply: The supply connected to APIO2_VDD. -- audio-supply: The supply connected to APIO5_VDD. -- sdmmc-supply: The supply connected to SDMMC0_VDD. -- gpio1830 The supply connected to APIO4_VDD. - -Possible supplies for rk3399 pmu-domains: -- pmu1830-supply:The supply connected to PMUIO2_VDD. - -Example: - - io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - audio-supply = <&vcc18_codec>; - bb-supply = <&vcc33_io>; - dvp-supply = <&vcc_18>; - flash0-supply = <&vcc18_flashio>; - gpio1830-supply = <&vcc33_io>; - gpio30-supply = <&vcc33_pmuio>; - lcdc-supply = <&vcc33_lcd>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc18_wl>; - }; diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml new file mode 100644 index 000000000000..1727bf108979 --- /dev/null +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml @@ -0,0 +1,360 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SRAM for IO Voltage Domains + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: | + IO domain voltages on some Rockchip SoCs are variable but need to be + kept in sync between the regulators and the SoC using a special + register. + + A specific example using rk3288 + If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then + bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to + that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1. + + Said another way, this driver simply handles keeping bits in the SoCs + General Register File (GRF) in sync with the actual value of a voltage + hooked up to the pins. + + Note that this driver specifically does not include + any logic for deciding what voltage we should set regulators to + any logic for deciding whether regulators (or internal SoC blocks) + should have power or not have power + + If there were some other software that had the smarts of making + decisions about regulators, it would work in conjunction with this + driver. When that other software adjusted a regulators voltage then + this driver would handle telling the SoC about it. A good example is + vqmmc for SD. In that case the dw_mmc driver simply is told about a + regulator. It changes the regulator between 3.3V and 1.8V at the + right time. This driver notices the change and makes sure that the + SoC is on the same page. + + You specify supplies using the standard regulator bindings by including + a phandle the relevant regulator. All specified supplies must be able + to report their voltage. The IO Voltage Domain for any non-specified + supplies will be not be touched. + +properties: + compatible: + enum: + - rockchip,px30-io-voltage-domain + - rockchip,px30-pmu-io-voltage-domain + - rockchip,rk3188-io-voltage-domain + - rockchip,rk3228-io-voltage-domain + - rockchip,rk3288-io-voltage-domain + - rockchip,rk3328-io-voltage-domain + - rockchip,rk3368-io-voltage-domain + - rockchip,rk3368-pmu-io-voltage-domain + - rockchip,rk3399-io-voltage-domain + - rockchip,rk3399-pmu-io-voltage-domain + - rockchip,rk3568-pmu-io-voltage-domain + - rockchip,rv1108-io-voltage-domain + - rockchip,rv1108-pmu-io-voltage-domain + +required: + - compatible + +unevaluatedProperties: false + +allOf: + - $ref: "#/$defs/px30" + - $ref: "#/$defs/px30-pmu" + - $ref: "#/$defs/rk3188" + - $ref: "#/$defs/rk3228" + - $ref: "#/$defs/rk3288" + - $ref: "#/$defs/rk3328" + - $ref: "#/$defs/rk3368" + - $ref: "#/$defs/rk3368-pmu" + - $ref: "#/$defs/rk3399" + - $ref: "#/$defs/rk3399-pmu" + - $ref: "#/$defs/rk3568-pmu" + - $ref: "#/$defs/rv1108" + - $ref: "#/$defs/rv1108-pmu" + +$defs: + px30: + if: + properties: + compatible: + contains: + const: rockchip,px30-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio-oscgpi-supply: + description: The supply connected to VCCIO_OSCGPI. + + px30-pmu: + if: + properties: + compatible: + contains: + const: rockchip,px30-pmu-io-voltage-domain + + then: + properties: + pmuio1-supply: + description: The supply connected to PMUIO1. + pmuio2-supply: + description: The supply connected to PMUIO2. + + rk3188: + if: + properties: + compatible: + contains: + const: rockchip,rk3188-io-voltage-domain + + then: + properties: + ap0-supply: + description: The supply connected to AP0_VCC. + ap1-supply: + description: The supply connected to AP1_VCC. + cif-supply: + description: The supply connected to CIF_VCC. + flash-supply: + description: The supply connected to FLASH_VCC. + lcdc0-supply: + description: The supply connected to LCD0_VCC. + lcdc1-supply: + description: The supply connected to LCD1_VCC. + vccio0-supply: + description: The supply connected to VCCIO0. + vccio1-supply: + description: The supply connected to VCCIO1. Also labeled as VCCIO2. + + rk3228: + if: + properties: + compatible: + contains: + const: rockchip,rk3228-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + + rk3288: + if: + properties: + compatible: + contains: + const: rockchip,rk3288-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO4_VDD. + bb-supply: + description: The supply connected to APIO5_VDD. + dvp-supply: + description: The supply connected to DVPIO_VDD. + flash0-supply: + description: The supply connected to FLASH0_VDD. Typically for eMMC. + flash1-supply: + description: The supply connected to FLASH1_VDD. Also known as SDIO1. + gpio30-supply: + description: The supply connected to APIO1_VDD. + gpio1830-supply: + description: The supply connected to APIO2_VDD. + lcdc-supply: + description: The supply connected to LCDC_VDD. + sdcard-supply: + description: The supply connected to SDMMC0_VDD. + wifi-supply: + description: The supply connected to APIO3_VDD. Also known as SDIO0. + + rk3328: + if: + properties: + compatible: + contains: + const: rockchip,rk3328-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + pmuio-supply: + description: The supply connected to VCCIO_PMU. + + rk3368: + if: + properties: + compatible: + contains: + const: rockchip,rk3368-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO3_VDD. + dvp-supply: + description: The supply connected to DVPIO_VDD. + flash0-supply: + description: The supply connected to FLASH0_VDD. Typically for eMMC. + gpio30-supply: + description: The supply connected to APIO1_VDD. + gpio1830-supply: + description: The supply connected to APIO4_VDD. + sdcard-supply: + description: The supply connected to SDMMC0_VDD. + wifi-supply: + description: The supply connected to APIO2_VDD. Also known as SDIO0. + + rk3368-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3368-pmu-io-voltage-domain + + then: + properties: + pmu-supply: + description: The supply connected to PMUIO_VDD. + vop-supply: + description: The supply connected to LCDC_VDD. + + rk3399: + if: + properties: + compatible: + contains: + const: rockchip,rk3399-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO5_VDD. + bt656-supply: + description: The supply connected to APIO2_VDD. + gpio1830-supply: + description: The supply connected to APIO4_VDD. + sdmmc-supply: + description: The supply connected to SDMMC0_VDD. + + rk3399-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3399-pmu-io-voltage-domain + + then: + properties: + pmu1830-supply: + description: The supply connected to PMUIO2_VDD. + + rk3568-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3568-pmu-io-voltage-domain + + then: + properties: + pmuio1-supply: + description: The supply connected to PMUIO1. + pmuio2-supply: + description: The supply connected to PMUIO2. + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio7-supply: + description: The supply connected to VCCIO7. + + rv1108: + if: + properties: + compatible: + contains: + const: rockchip,rv1108-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to APIO1_VDD. + vccio2-supply: + description: The supply connected to APIO2_VDD. + vccio3-supply: + description: The supply connected to APIO3_VDD. + vccio5-supply: + description: The supply connected to APIO5_VDD. + vccio6-supply: + description: The supply connected to APIO6_VDD. + + rv1108-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rv1108-pmu-io-voltage-domain + + then: + properties: + pmu-supply: + description: The supply connected to PMUIO_VDD. + +examples: + - | + io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + audio-supply = <&vcc18_codec>; + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_pmuio>; + lcdc-supply = <&vcc33_lcd>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc18_wl>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml index c3b4b7543591..d56ac484fec5 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -31,6 +31,20 @@ properties: compatible: const: simple-battery + device-chemistry: + description: This describes the chemical technology of the battery. + oneOf: + - const: nickel-cadmium + - const: nickel-metal-hydride + - const: lithium-ion + description: This is a blanket type for all lithium-ion batteries, + including those below. If possible, a precise compatible string + from below should be used, but sometimes it is unknown which specific + lithium ion battery is employed and this wide compatible can be used. + - const: lithium-ion-polymer + - const: lithium-ion-iron-phosphate + - const: lithium-ion-manganese-oxide + over-voltage-threshold-microvolt: description: battery over-voltage limit diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.txt b/Documentation/devicetree/bindings/power/supply/charger-manager.txt deleted file mode 100644 index b5ae9061b7a0..000000000000 --- a/Documentation/devicetree/bindings/power/supply/charger-manager.txt +++ /dev/null @@ -1,91 +0,0 @@ -charger-manager bindings -~~~~~~~~~~~~~~~~~~~~~~~~ - -Required properties : - - compatible : "charger-manager" - - <>-supply : for regulator consumer, named according to cm-regulator-name - - cm-chargers : name of chargers - - cm-fuel-gauge : name of battery fuel gauge - - subnode <regulator> : - - cm-regulator-name : name of charger regulator - - subnode <cable> : - - cm-cable-name : name of charger cable - one of USB, USB-HOST, - SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT, - PD, DOCK, JIG, or MECHANICAL - - cm-cable-extcon : name of extcon dev -(optional) - cm-cable-min : minimum current of cable -(optional) - cm-cable-max : maximum current of cable - -Optional properties : - - cm-name : charger manager's name (default : "battery") - - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when - external power is connected, or 3 for when charging. If not present, - then polling is disabled - - cm-poll-interval : polling interval (in ms) - - cm-battery-stat : battery status - 0 for battery always present, 1 for no - battery, 2 to check presence via fuel gauge, or 3 to check presence - via charger - - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging - - cm-fullbatt-voltage : voltage (in uV) of full battery - - cm-fullbatt-soc : state of charge to consider as full battery - - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery - - cm-thermal-zone : name of external thermometer's thermal zone - - cm-battery-* : threshold battery temperature for charging - -cold : critical cold temperature of battery for charging - -cold-in-minus : flag that cold temperature is in minus degrees - -hot : critical hot temperature of battery for charging - -temp-diff : temperature difference to allow recharging - - cm-dis/charging-max = limits of charging duration - -Deprecated properties: - - cm-num-chargers - - cm-fullbatt-vchkdrop-ms - -Example : - charger-manager@0 { - compatible = "charger-manager"; - chg-reg-supply = <&charger_regulator>; - - cm-name = "battery"; - /* Always polling ON : 30s */ - cm-poll-mode = <1>; - cm-poll-interval = <30000>; - - cm-fullbatt-vchkdrop-volt = <150000>; - cm-fullbatt-soc = <100>; - - cm-battery-stat = <3>; - - cm-chargers = "charger0", "charger1", "charger2"; - - cm-fuel-gauge = "fuelgauge0"; - - cm-thermal-zone = "thermal_zone.1" - /* in deci centigrade */ - cm-battery-cold = <50>; - cm-battery-cold-in-minus; - cm-battery-hot = <800>; - cm-battery-temp-diff = <100>; - - /* Allow charging for 5hr */ - cm-charging-max = <18000000>; - /* Allow discharging for 2hr */ - cm-discharging-max = <7200000>; - - regulator@0 { - cm-regulator-name = "chg-reg"; - cable@0 { - cm-cable-name = "USB"; - cm-cable-extcon = "extcon-dev.0"; - cm-cable-min = <475000>; - cm-cable-max = <500000>; - }; - cable@1 { - cm-cable-name = "SDP"; - cm-cable-extcon = "extcon-dev.0"; - cm-cable-min = <650000>; - cm-cable-max = <675000>; - }; - }; - - }; diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml new file mode 100644 index 000000000000..c863cfa67865 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Charger Manager + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + Binding for the legacy charger manager driver. + Please do not use for new products. + +properties: + compatible: + const: charger-manager + + cm-chargers: + description: name of chargers + $ref: /schemas/types.yaml#/definitions/string-array + + cm-num-chargers: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + + cm-fuel-gauge: + description: name of battery fuel gauge + $ref: /schemas/types.yaml#/definitions/string + + cm-name: + description: name of the charger manager + default: battery + $ref: /schemas/types.yaml#/definitions/string + + cm-poll-mode: + description: polling mode + default: 0 + enum: + - 0 # disabled + - 1 # always + - 2 # when external power is connected + - 3 # when charging + + cm-poll-interval: + description: polling interval (in ms) + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-stat: + description: battery status + enum: + - 0 # battery always present + - 1 # no battery + - 2 # check presence via fuel gauge + - 3 # check presence via charger + + cm-fullbatt-vchkdrop-volt: + description: voltage drop before restarting charging in uV + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-vchkdrop-ms: + deprecated: true + + cm-fullbatt-voltage: + description: voltage of full battery in uV + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-soc: + description: state of charge to consider as full battery in % + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-capacity: + description: capcity to consider as full battery in uAh + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-thermal-zone: + description: name of external thermometer's thermal zone + $ref: /schemas/types.yaml#/definitions/string + + cm-discharging-max: + description: limits of discharging duration in ms + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-charging-max: + description: limits of charging duration in ms + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-cold: + description: critical cold temperature of battery for charging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-cold-in-minus: + description: if set cm-battery-cold temperature is in minus degrees + type: boolean + + cm-battery-hot: + description: critical hot temperature of battery for charging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-temp-diff: + description: temperature difference to allow recharging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + "-supply$": + description: regulator consumer, named according to cm-regulator-name + $ref: /schemas/types.yaml#/definitions/phandle + + "^regulator[@-][0-9]$": + type: object + properties: + cm-regulator-name: + description: name of charger regulator + $ref: /schemas/types.yaml#/definitions/string + + required: + - cm-regulator-name + + additionalProperties: false + + patternProperties: + "^cable[@-][0-9]$": + type: object + properties: + cm-cable-name: + description: name of charger cable + enum: + - USB + - USB-HOST + - SDP + - DCP + - CDP + - ACA + - FAST-CHARGER + - SLOW-CHARGER + - WPT + - PD + - DOCK + - JIG + - MECHANICAL + + cm-cable-extcon: + description: name of extcon dev + $ref: /schemas/types.yaml#/definitions/string + + cm-cable-min: + description: minimum current of cable in uA + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-cable-max: + description: maximum current of cable in uA + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - cm-cable-name + - cm-cable-extcon + + additionalProperties: false + +required: + - compatible + - cm-chargers + - cm-fuel-gauge + +additionalProperties: false + +examples: + - | + charger-manager { + compatible = "charger-manager"; + chg-reg-supply = <&charger_regulator>; + + cm-name = "battery"; + /* Always polling ON : 30s */ + cm-poll-mode = <1>; + cm-poll-interval = <30000>; + + cm-fullbatt-vchkdrop-volt = <150000>; + cm-fullbatt-soc = <100>; + + cm-battery-stat = <3>; + + cm-chargers = "charger0", "charger1", "charger2"; + + cm-fuel-gauge = "fuelgauge0"; + + cm-thermal-zone = "thermal_zone.1"; + /* in deci centigrade */ + cm-battery-cold = <50>; + cm-battery-cold-in-minus; + cm-battery-hot = <800>; + cm-battery-temp-diff = <100>; + + /* Allow charging for 5hr */ + cm-charging-max = <18000000>; + /* Allow discharging for 2hr */ + cm-discharging-max = <7200000>; + + regulator-0 { + cm-regulator-name = "chg-reg"; + cable-0 { + cm-cable-name = "USB"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <475000>; + cm-cable-max = <500000>; + }; + cable-1 { + cm-cable-name = "SDP"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <650000>; + cm-cable-max = <675000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml index de91cf3f058c..f792d06db413 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml @@ -89,7 +89,7 @@ examples: reg = <0x36>; maxim,alert-low-soc-level = <10>; interrupt-parent = <&gpio7>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; wakeup-source; }; }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml index c70f05ea6d27..971b53c58cc6 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml @@ -19,12 +19,15 @@ properties: - maxim,max17047 - maxim,max17050 - maxim,max17055 + - maxim,max77849-battery reg: maxItems: 1 interrupts: maxItems: 1 + description: | + The ALRT pin, an open-drain interrupt. maxim,rsns-microohm: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml new file mode 100644 index 000000000000..b89b15a5bfa4 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery charger driver for MT6360 PMIC from MediaTek Integrated. + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + This module is part of the MT6360 MFD device. + Provides Battery Charger, Boost for OTG devices and BC1.2 detection. + +properties: + compatible: + const: mediatek,mt6360-chg + + richtek,vinovp-microvolt: + description: Maximum CHGIN regulation voltage in uV. + enum: [ 5500000, 6500000, 11000000, 14500000 ] + + + usb-otg-vbus-regulator: + type: object + description: OTG boost regulator. + $ref: /schemas/regulator/regulator.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + mt6360_charger: charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml new file mode 100644 index 000000000000..ae647d3355a2 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Richtek RT5033 PMIC Fuel Gauge + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: richtek,rt5033-battery + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml index 983fc215c1e5..20862cdfc116 100644 --- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml @@ -73,6 +73,26 @@ properties: - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation + summit,inok-polarity: + description: | + Polarity of INOK signal indicating presence of external power supply. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # SMB3XX_SYSOK_INOK_ACTIVE_LOW + - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH + + usb-vbus: + $ref: "../../regulator/regulator.yaml#" + type: object + + properties: + summit,needs-inok-toggle: + type: boolean + description: INOK signal is fixed and polarity needs to be toggled + in order to enable/disable output mode. + + unevaluatedProperties: false + allOf: - if: properties: @@ -134,6 +154,7 @@ examples: reg = <0x7f>; summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>; + summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>; summit,chip-temperature-threshold-celsius = <110>; summit,mains-current-limit-microamp = <2000000>; summit,usb-current-limit-microamp = <500000>; @@ -141,6 +162,15 @@ examples: summit,enable-mains-charging; monitored-battery = <&battery>; + + usb-vbus { + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-min-microamp = <750000>; + regulator-max-microamp = <750000>; + summit,needs-inok-toggle; + }; }; }; diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml index dcda6660b8ed..de6a23aee977 100644 --- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml @@ -21,10 +21,13 @@ allOf: properties: compatible: - enum: - - x-powers,axp202-ac-power-supply - - x-powers,axp221-ac-power-supply - - x-powers,axp813-ac-power-supply + oneOf: + - const: x-powers,axp202-ac-power-supply + - const: x-powers,axp221-ac-power-supply + - items: + - const: x-powers,axp803-ac-power-supply + - const: x-powers,axp813-ac-power-supply + - const: x-powers,axp813-ac-power-supply required: - compatible diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml index 86e8a713d4e2..d055428ae39f 100644 --- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml @@ -19,10 +19,14 @@ allOf: properties: compatible: - enum: - - x-powers,axp209-battery-power-supply - - x-powers,axp221-battery-power-supply - - x-powers,axp813-battery-power-supply + oneOf: + - const: x-powers,axp202-battery-power-supply + - const: x-powers,axp209-battery-power-supply + - const: x-powers,axp221-battery-power-supply + - items: + - const: x-powers,axp803-battery-power-supply + - const: x-powers,axp813-battery-power-supply + - const: x-powers,axp813-battery-power-supply required: - compatible diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml index 61f1b320c157..0c371b55c9e1 100644 --- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml @@ -20,11 +20,15 @@ allOf: properties: compatible: - enum: - - x-powers,axp202-usb-power-supply - - x-powers,axp221-usb-power-supply - - x-powers,axp223-usb-power-supply - - x-powers,axp813-usb-power-supply + oneOf: + - enum: + - x-powers,axp202-usb-power-supply + - x-powers,axp221-usb-power-supply + - x-powers,axp223-usb-power-supply + - x-powers,axp813-usb-power-supply + - items: + - const: x-powers,axp803-usb-power-supply + - const: x-powers,axp813-usb-power-supply required: |