diff options
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/act8945a-regulator.txt')
-rw-r--r-- | Documentation/devicetree/bindings/regulator/act8945a-regulator.txt | 113 |
1 files changed, 0 insertions, 113 deletions
diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt deleted file mode 100644 index 4017527619ab..000000000000 --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt +++ /dev/null @@ -1,113 +0,0 @@ -Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device - -Required properties: - - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt. - -Optional properties: -- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high. - If this property is missing, assume the VSEL pin is set to logic-low. - -Optional input supply properties: - - vp1-supply: The input supply for REG_DCDC1 - - vp2-supply: The input supply for REG_DCDC2 - - vp3-supply: The input supply for REG_DCDC3 - - inl45-supply: The input supply for REG_LDO1 and REG_LDO2 - - inl67-supply: The input supply for REG_LDO3 and REG_LDO4 - -Any standard regulator properties can be used to configure the single regulator. -regulator-initial-mode, regulator-allowed-modes and regulator-mode could be -specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h -file. - -The valid names for regulators are: - REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4. - -Example: - -#include <dt-bindings/regulator/active-semi,8945a-regulator.h> - - pmic@5b { - compatible = "active-semi,act8945a"; - reg = <0x5b>; - - active-semi,vsel-high; - - regulators { - vdd_1v35_reg: REG_DCDC1 { - regulator-name = "VDD_1V35"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - - regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, - <ACT8945A_REGULATOR_MODE_LOWPOWER>; - regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-min-microvolt=<1400000>; - regulator-suspend-max-microvolt=<1400000>; - regulator-changeable-in-suspend; - regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>; - }; - }; - - vdd_1v2_reg: REG_DCDC2 { - regulator-name = "VDD_1V2"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - - regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, - <ACT8945A_REGULATOR_MODE_LOWPOWER>; - regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_3v3_reg: REG_DCDC3 { - regulator-name = "VDD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_fuse_reg: REG_LDO1 { - regulator-name = "VDD_FUSE"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - - regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, - <ACT8945A_REGULATOR_MODE_LOWPOWER>; - regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_3v3_lp_reg: REG_LDO2 { - regulator-name = "VDD_3V3_LP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_led_reg: REG_LDO3 { - regulator-name = "VDD_LED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sdhc_1v8_reg: REG_LDO4 { - regulator-name = "VDD_SDHC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; |