diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/ti')
3 files changed, 87 insertions, 80 deletions
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt deleted file mode 100644 index 6217e64309de..000000000000 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +++ /dev/null @@ -1,65 +0,0 @@ -Texas Instruments TI-SCI Generic Power Domain ---------------------------------------------- - -Some TI SoCs contain a system controller (like the PMMC, etc...) that is -responsible for controlling the state of the IPs that are present. -Communication between the host processor running an OS and the system -controller happens through a protocol known as TI-SCI [1]. - -[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -PM Domain Node -============== -The PM domain node represents the global PM domain managed by the PMMC, which -in this case is the implementation as documented by the generic PM domain -bindings in Documentation/devicetree/bindings/power/power-domain.yaml. Because -this relies on the TI SCI protocol to communicate with the PMMC it must be a -child of the pmmc node. - -Required Properties: --------------------- -- compatible: should be "ti,sci-pm-domain" -- #power-domain-cells: Can be one of the following: - 1: Containing the device id of each node - 2: First entry should be device id - Second entry should be one of the floowing: - TI_SCI_PD_EXCLUSIVE: To allow device to be - exclusively controlled by - the requesting hosts. - TI_SCI_PD_SHARED: To allow device to be shared - by multiple hosts. - -Example (K2G): -------------- - pmmc: pmmc { - compatible = "ti,k2g-sci"; - ... - - k2g_pds: power-controller { - compatible = "ti,sci-pm-domain"; - #power-domain-cells = <1>; - }; - }; - -PM Domain Consumers -=================== -Hardware blocks belonging to a PM domain should contain a "power-domains" -property that is a phandle pointing to the corresponding PM domain node -along with an index representing the device id to be passed to the PMMC -for device control. - -Required Properties: --------------------- -- power-domains: phandle pointing to the corresponding PM domain node - and an ID representing the device. - -See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list -of valid identifiers for k2g. - -Example (K2G): --------------------- - uart0: serial@2530c00 { - compatible = "ns16550a"; - ... - power-domains = <&k2g_pds 0x002c>; - }; diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml new file mode 100644 index 000000000000..9e6cb4ee9755 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI generic power domain node bindings + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: /schemas/power/power-domain.yaml# + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This PM domain node represents the global PM domain managed by the TI-SCI + controller. Since this relies on the TI SCI protocol to communicate with + the TI-SCI controller, it must be a child of the TI-SCI controller node. + +properties: + compatible: + const: ti,sci-pm-domain + + "#power-domain-cells": + enum: [1, 2] + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell, if cell-value is 2, should be one of the following + TI_SCI_PD_EXCLUSIVE - Allows the device to be exclusively controlled + or + TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts. + Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + +additionalProperties: false + +examples: + - | + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + - | + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index dbc62821c60b..9d128b9e7deb 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -68,6 +68,7 @@ properties: - ti,k2g-pruss # for 66AK2G SoC family - ti,am654-icssg # for K3 AM65x SoC family - ti,j721e-icssg # for K3 J721E SoC family + - ti,am642-icssg # for K3 AM64x SoC family reg: maxItems: 1 @@ -84,6 +85,8 @@ properties: dma-ranges: maxItems: 1 + dma-coherent: true + power-domains: description: | This property is as per sci-pm-domain.txt. @@ -100,7 +103,6 @@ patternProperties: properties: reg: minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. - maxItems: 3 items: - description: Address and size of the Data RAM0. - description: Address and size of the Data RAM1. @@ -111,7 +113,6 @@ patternProperties: reg-names: minItems: 2 - maxItems: 3 items: - const: dram0 - const: dram1 @@ -233,8 +234,8 @@ patternProperties: description: | Industrial Ethernet Peripheral to manage/generate Industrial Ethernet functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x, - AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x & J721E SoCs ). IEP - is used for creating PTP clocks and generating PPS signals. + AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x, J721E & AM64x SoCs). + IEP is used for creating PTP clocks and generating PPS signals. type: object @@ -325,17 +326,29 @@ additionalProperties: false # - interrupt-controller # - pru -if: - properties: - compatible: - contains: - enum: - - ti,k2g-pruss - - ti,am654-icssg - - ti,j721e-icssg -then: - required: - - power-domains +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,k2g-pruss + - ti,am654-icssg + - ti,j721e-icssg + - ti,am642-icssg + then: + required: + - power-domains + + - if: + properties: + compatible: + contains: + enum: + - ti,k2g-pruss + then: + required: + - dma-coherent examples: - | |