diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/da7219.txt')
-rw-r--r-- | Documentation/devicetree/bindings/sound/da7219.txt | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt deleted file mode 100644 index add1caf26ac2..000000000000 --- a/Documentation/devicetree/bindings/sound/da7219.txt +++ /dev/null @@ -1,112 +0,0 @@ -Dialog Semiconductor DA7219 Audio Codec bindings - -DA7219 is an audio codec with advanced accessory detect features. - -====== - -Required properties: -- compatible : Should be "dlg,da7219" -- reg: Specifies the I2C slave address - -- interrupts : IRQ line info for DA7219. - (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for - further information relating to interrupt properties) - -- VDD-supply: VDD power supply for the device -- VDDMIC-supply: VDDMIC power supply for the device -- VDDIO-supply: VDDIO power supply for the device - (See Documentation/devicetree/bindings/regulator/regulator.txt for further - information relating to regulators) - -Optional properties: -- interrupt-names : Name associated with interrupt line. Should be "wakeup" if - interrupt is to be used to wake system, otherwise "irq" should be used. -- wakeup-source: Flag to indicate this device can wake system (suspend/resume). - -- #clock-cells : Should be set to '<1>', two clock sources provided; -- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK); - -- clocks : phandle and clock specifier for codec MCLK. -- clock-names : Clock name string for 'clocks' attribute, should be "mclk". - -- dlg,micbias-lvl : Voltage (mV) for Mic Bias - [<1600>, <1800>, <2000>, <2200>, <2400>, <2600>] -- dlg,mic-amp-in-sel : Mic input source type - ["diff", "se_p", "se_n"] - -Deprecated properties: -- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine - (LDO unavailable in production HW so property no longer required). - -====== - -Child node - 'da7219_aad': - -Optional properties: -- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). - [<2800>, <2900>] -- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) -- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms) - [<2>, <5>, <10>, <50>, <100>, <200>, <500>] -- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms) - [<200>, <500>, <750>, <1000>] -- dlg,jack-ins-deb : Debounce time for jack insertion (ms) - [<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>] -- dlg,jack-det-rate: Jack type detection latency (3/4 pole) - ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"] -- dlg,jack-rem-deb : Debounce time for jack removal (ms) - [<1>, <5>, <10>, <20>] -- dlg,a-d-btn-thr : Impedance threshold between buttons A and D - [0x0 - 0xFF] -- dlg,d-b-btn-thr : Impedance threshold between buttons D and B - [0x0 - 0xFF] -- dlg,b-c-btn-thr : Impedance threshold between buttons B and C - [0x0 - 0xFF] -- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic - [0x0 - 0xFF] -- dlg,btn-avg : Number of 8-bit readings for averaged button measurement - [<1>, <2>, <4>, <8>] -- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement - [<1>, <2>, <4>, <8>] - -====== - -Example: - - codec: da7219@1a { - compatible = "dlg,da7219"; - reg = <0x1a>; - - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - - VDD-supply = <®_audio>; - VDDMIC-supply = <®_audio>; - VDDIO-supply = <®_audio>; - - #clock-cells = <1>; - clock-output-names = "dai-wclk", "dai-bclk"; - - clocks = <&clks 201>; - clock-names = "mclk"; - - dlg,ldo-lvl = <1200>; - dlg,micbias-lvl = <2600>; - dlg,mic-amp-in-sel = "diff"; - - da7219_aad { - dlg,btn-cfg = <50>; - dlg,mic-det-thr = <500>; - dlg,jack-ins-deb = <20>; - dlg,jack-det-rate = "32ms_64ms"; - dlg,jack-rem-deb = <1>; - - dlg,a-d-btn-thr = <0xa>; - dlg,d-b-btn-thr = <0x16>; - dlg,b-c-btn-thr = <0x21>; - dlg,c-mic-btn-thr = <0x3E>; - - dlg,btn-avg = <4>; - dlg,adc-1bit-rpt = <1>; - }; - }; |