diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/tlv320adcx140.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/sound/tlv320adcx140.yaml | 64 |
1 files changed, 32 insertions, 32 deletions
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index ee698614862e..6b8214071115 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -109,38 +109,6 @@ properties: maximum: 7 default: [0, 0, 0, 0] - ti,asi-tx-drive: - type: boolean - description: | - When set the device will set the Tx ASI output to a Hi-Z state for unused - data cycles. Default is to drive the output low on unused ASI cycles. - -patternProperties: - '^ti,gpo-config-[1-4]$': - $ref: /schemas/types.yaml#/definitions/uint32-array - description: | - Defines the configuration and output driver for the general purpose - output pins (GPO). These values are pairs, the first value is for the - configuration type and the second value is for the output drive type. - The array is defined as <GPO_CFG GPO_DRV> - - GPO output configuration can be one of the following: - - 0 - (default) disabled - 1 - GPOX is configured as a general-purpose output (GPO) - 2 - GPOX is configured as a device interrupt output (IRQ) - 3 - GPOX is configured as a secondary ASI output (SDOUT2) - 4 - GPOX is configured as a PDM clock output (PDMCLK) - - GPO output drive configuration for the GPO pins can be one of the following: - - 0d - (default) Hi-Z output - 1d - Drive active low and active high - 2d - Drive active low and weak high - 3d - Drive active low and Hi-Z - 4d - Drive weak low and active high - 5d - Drive Hi-Z and active high - ti,gpio-config: description: | Defines the configuration and output drive for the General Purpose @@ -183,6 +151,38 @@ patternProperties: maximum: 15 default: [2, 2] + ti,asi-tx-drive: + type: boolean + description: | + When set the device will set the Tx ASI output to a Hi-Z state for unused + data cycles. Default is to drive the output low on unused ASI cycles. + +patternProperties: + '^ti,gpo-config-[1-4]$': + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Defines the configuration and output driver for the general purpose + output pins (GPO). These values are pairs, the first value is for the + configuration type and the second value is for the output drive type. + The array is defined as <GPO_CFG GPO_DRV> + + GPO output configuration can be one of the following: + + 0 - (default) disabled + 1 - GPOX is configured as a general-purpose output (GPO) + 2 - GPOX is configured as a device interrupt output (IRQ) + 3 - GPOX is configured as a secondary ASI output (SDOUT2) + 4 - GPOX is configured as a PDM clock output (PDMCLK) + + GPO output drive configuration for the GPO pins can be one of the following: + + 0d - (default) Hi-Z output + 1d - Drive active low and active high + 2d - Drive active low and weak high + 3d - Drive active low and Hi-Z + 4d - Drive weak low and active high + 5d - Drive Hi-Z and active high + required: - compatible - reg |