diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 54 |
1 files changed, 52 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index c62cbe79f00d..99ed9b416e94 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -22,6 +22,21 @@ allOf: properties: reg: minItems: 2 + - if: + properties: + compatible: + contains: + enum: + - baikal,bt1-sys-ssi + then: + properties: + mux-controls: + maxItems: 1 + required: + - mux-controls + else: + required: + - interrupts properties: compatible: @@ -36,6 +51,8 @@ properties: - mscc,ocelot-spi - mscc,jaguar2-spi - const: snps,dw-apb-ssi + - description: Microchip Sparx5 SoC SPI Controller + const: microchip,sparx5-spi - description: Amazon Alpine SPI Controller const: amazon,alpine-dw-apb-ssi - description: Renesas RZ/N1 SPI Controller @@ -44,12 +61,16 @@ properties: - const: snps,dw-apb-ssi - description: Intel Keem Bay SPI Controller const: intel,keembay-ssi + - description: Baikal-T1 SPI Controller + const: baikal,bt1-ssi + - description: Baikal-T1 System Boot SPI Controller + const: baikal,bt1-sys-ssi reg: minItems: 1 items: - description: DW APB SSI controller memory mapped registers - - description: SPI MST region map + - description: SPI MST region map or directly mapped SPI ROM interrupts: maxItems: 1 @@ -93,6 +114,12 @@ properties: - const: tx - const: rx + rx-sample-delay-ns: + default: 0 + description: Default value of the rx-sample-delay-ns property. + This value will be used if the property is not explicitly defined + for a SPI slave device. See below. + patternProperties: "^.*@[0-9a-f]+$": type: object @@ -107,6 +134,13 @@ patternProperties: spi-tx-bus-width: const: 1 + rx-sample-delay-ns: + description: SPI Rx sample delay offset, unit is nanoseconds. + The delay from the default sample time before the actual + sample of the rxd input signal occurs. The "rx_sample_delay" + is an optional feature of the designware controller, and the + upper limit is also subject to controller configuration. + unevaluatedProperties: false required: @@ -114,7 +148,6 @@ required: - reg - "#address-cells" - "#size-cells" - - interrupts - clocks examples: @@ -129,5 +162,22 @@ examples: num-cs = <2>; cs-gpios = <&gpio0 13 0>, <&gpio0 14 0>; + rx-sample-delay-ns = <3>; + spi-flash@1 { + compatible = "spi-nand"; + reg = <1>; + rx-sample-delay-ns = <7>; + }; + }; + - | + spi@1f040100 { + compatible = "baikal,bt1-sys-ssi"; + reg = <0x1f040100 0x900>, + <0x1c000000 0x1000000>; + #address-cells = <1>; + #size-cells = <0>; + mux-controls = <&boot_mux>; + clocks = <&ccu_sys>; + clock-names = "ssi_clk"; }; ... |