summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/spi
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
-rw-r--r--Documentation/devicetree/bindings/spi/fsl-spi.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/sh-hspi.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt6
-rw-r--r--Documentation/devicetree/bindings/spi/spi-cadence.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rockchip.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rspi.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-uniphier.txt22
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xilinx.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xlp.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt1
12 files changed, 27 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt
index a2331372068c..8854004a1d3a 100644
--- a/Documentation/devicetree/bindings/spi/fsl-spi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt
@@ -12,8 +12,6 @@ Required properties:
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- clock-frequency : input clock frequency to non FSL_SOC cores
Optional properties:
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
index 585fed90376e..b9d1e4d11a77 100644
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt
@@ -6,8 +6,6 @@ Required properties:
- "renesas,hspi-r8a7778" (R-Car M1)
- "renesas,hspi-r8a7779" (R-Car H1)
- reg : Offset and length of the register set for the device
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device
- interrupts : Interrupt specifier
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index 39806329c193..bfbc2035fb6b 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -29,8 +29,6 @@ Required properties:
If two register sets are present, the first is to be
used by the CPU, and the second is to be used by the
DMA engine.
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device
- interrupts : Interrupt specifier
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index 204b311e0400..642d3fb1ef85 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -1,8 +1,10 @@
Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
Required properties:
-- compatible : "snps,dw-apb-ssi"
-- reg : The register base for the controller.
+- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
+ "jaguar2"
+- reg : The register base for the controller. For "mscc,<soc>-spi", a second
+ register set is required (named ICPU_CFG:SPI_MST)
- interrupts : One interrupt, used by the controller.
- #address-cells : <1>, as required by generic SPI binding.
- #size-cells : <0>, also as required by generic SPI binding.
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt
index 94f09141a4f0..05a2ef945664 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.txt
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.txt
@@ -6,7 +6,6 @@ Required properties:
- reg : Physical base address and size of SPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
- clock-names : List of input clock names - "ref_clk", "pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
index 225ace1d0c65..4af132606b37 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
@@ -4,7 +4,6 @@ Required properties:
- compatible :
- "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
- reg : address and length of the lpspi master registers
-- interrupt-parent : core interrupt controller
- interrupts : lpspi interrupt
- clocks : lpspi clock specifier
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index 6e3ffacbba32..a0edac12d8df 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -7,6 +7,7 @@ Required Properties:
- compatible: should be one of the following.
"rockchip,rv1108-spi" for rv1108 SoCs.
+ "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
"rockchip,rk3036-spi" for rk3036 SoCS.
"rockchip,rk3066-spi" for rk3066 SoCs.
"rockchip,rk3188-spi" for rk3188 SoCs.
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
index 3b02b3a7cfb2..96fd58548f69 100644
--- a/Documentation/devicetree/bindings/spi/spi-rspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -28,8 +28,6 @@ Required properties:
- "rx" for SPRI,
- "tx" to SPTI,
- "mux" for a single muxed interrupt.
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device.
- num-cs : Number of chip selects. Some RSPI cores have more than 1.
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
new file mode 100644
index 000000000000..504a4ecfc7b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -0,0 +1,22 @@
+Socionext UniPhier SPI controller driver
+
+UniPhier SoCs have SCSSI which supports SPI single channel.
+
+Required properties:
+ - compatible: should be "socionext,uniphier-scssi"
+ - reg: address and length of the spi master registers
+ - #address-cells: must be <1>, see spi-bus.txt
+ - #size-cells: must be <0>, see spi-bus.txt
+ - clocks: A phandle to the clock for the device.
+ - resets: A phandle to the reset control for the device.
+
+Example:
+
+spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ reg = <0x54006000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
index 7bf61efc66c8..dc924a5f71db 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
@@ -6,7 +6,6 @@ Required properties:
- reg : Physical base address and size of SPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
Optional properties:
- xlnx,num-ss-bits : Number of chip selects used.
diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt
index 40e82d51efec..f4925ec0ed33 100644
--- a/Documentation/devicetree/bindings/spi/spi-xlp.txt
+++ b/Documentation/devicetree/bindings/spi/spi-xlp.txt
@@ -13,7 +13,6 @@ Required properties:
- reg : Should contain register location and length.
- clocks : Phandle of the spi clock
- interrupts : Interrupt number used by this controller.
-- interrupt-parent : Phandle of the parent interrupt controller.
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
index c8f50e5cf70b..0f6d37ff541c 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
@@ -6,7 +6,6 @@ Required properties:
- reg : Physical base address and size of GQSPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller.
- clock-names : List of input clock names - "ref_clk", "pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).