diff options
Diffstat (limited to 'Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml | 67 |
1 files changed, 34 insertions, 33 deletions
diff --git a/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml index bffdab0b0185..3931054b42fb 100644 --- a/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml @@ -11,8 +11,8 @@ maintainers: description: | This hardware block consists of eight 16-bit timer channels and one - 32- bit timer channel. It supports the following specifications: - - Pulse input/output: 28 lines max. + 32-bit timer channel. It supports the following specifications: + - Pulse input/output: 28 lines max - Pulse input 3 lines - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination @@ -23,11 +23,11 @@ description: | - Input capture function (noise filter setting available) - Counter-clearing operation - Simultaneous writing to multiple timer counters (TCNT) - (excluding MTU8). + (excluding MTU8) - Simultaneous clearing on compare match or input capture - (excluding MTU8). + (excluding MTU8) - Simultaneous input and output to registers in synchronization with - counter operations (excluding MTU8). + counter operations (excluding MTU8) - Up to 12-phase PWM output in combination with synchronous operation (excluding MTU8) - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8] @@ -40,26 +40,26 @@ description: | - [MTU3, MTU4, MTU6, and MTU7] - Through interlocked operation of MTU3/4 and MTU6/7, the positive and negative signals in six phases (12 phases in total) can be output in - complementary PWM and reset-synchronized PWM operation. + complementary PWM and reset-synchronized PWM operation - In complementary PWM mode, values can be transferred from buffer registers to temporary registers at crests and troughs of the timer- counter values or when the buffer registers (TGRD registers in MTU4 - and MTU7) are written to. - - Double-buffering selectable in complementary PWM mode. + and MTU7) are written to + - Double-buffering selectable in complementary PWM mode - [MTU3 and MTU4] - Through interlocking with MTU0, a mode for driving AC synchronous motors (brushless DC motors) by using complementary PWM output and reset-synchronized PWM output is settable and allows the selection - of two types of waveform output (chopping or level). + of two types of waveform output (chopping or level) - [MTU5] - - Capable of operation as a dead-time compensation counter. + - Capable of operation as a dead-time compensation counter - [MTU0/MTU5, MTU1, MTU2, and MTU8] - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and - through interlocked operation with MTU0/MTU5 and MTU8. + through interlocked operation with MTU0/MTU5 and MTU8 - Interrupt-skipping function - In complementary PWM mode, interrupts on crests and troughs of counter values and triggers to start conversion by the A/D converter can be - skipped. + skipped - Interrupt sources: 43 sources. - Buffer operation: - Automatic transfer of register data (transfer from the buffer @@ -68,9 +68,9 @@ description: | - A/D converter start triggers can be generated - A/D converter start request delaying function enables A/D converter to be started with any desired timing and to be synchronized with - PWM output. + PWM output - Low power consumption function - - The MTU3a can be placed in the module-stop state. + - The MTU3a can be placed in the module-stop state There are two phase counting modes. 16-bit phase counting mode in which MTU1 and MTU2 operate independently, and cascade connection 32-bit phase @@ -109,6 +109,7 @@ properties: compatible: items: - enum: + - renesas,r9a07g043-mtu3 # RZ/{G2UL,Five} - renesas,r9a07g044-mtu3 # RZ/G2{L,LC} - renesas,r9a07g054-mtu3 # RZ/V2L - const: renesas,rz-mtu3 @@ -169,27 +170,27 @@ properties: - const: tgib0 - const: tgic0 - const: tgid0 - - const: tgiv0 + - const: tciv0 - const: tgie0 - const: tgif0 - const: tgia1 - const: tgib1 - - const: tgiv1 - - const: tgiu1 + - const: tciv1 + - const: tciu1 - const: tgia2 - const: tgib2 - - const: tgiv2 - - const: tgiu2 + - const: tciv2 + - const: tciu2 - const: tgia3 - const: tgib3 - const: tgic3 - const: tgid3 - - const: tgiv3 + - const: tciv3 - const: tgia4 - const: tgib4 - const: tgic4 - const: tgid4 - - const: tgiv4 + - const: tciv4 - const: tgiu5 - const: tgiv5 - const: tgiw5 @@ -197,18 +198,18 @@ properties: - const: tgib6 - const: tgic6 - const: tgid6 - - const: tgiv6 + - const: tciv6 - const: tgia7 - const: tgib7 - const: tgic7 - const: tgid7 - - const: tgiv7 + - const: tciv7 - const: tgia8 - const: tgib8 - const: tgic8 - const: tgid8 - - const: tgiv8 - - const: tgiu8 + - const: tciv8 + - const: tciu8 clocks: maxItems: 1 @@ -285,16 +286,16 @@ examples: <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0", + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0", "tgif0", - "tgia1", "tgib1", "tgiv1", "tgiu1", - "tgia2", "tgib2", "tgiv2", "tgiu2", - "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3", - "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4", + "tgia1", "tgib1", "tciv1", "tciu1", + "tgia2", "tgib2", "tciv2", "tciu2", + "tgia3", "tgib3", "tgic3", "tgid3", "tciv3", + "tgia4", "tgib4", "tgic4", "tgid4", "tciv4", "tgiu5", "tgiv5", "tgiw5", - "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6", - "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7", - "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8"; + "tgia6", "tgib6", "tgic6", "tgid6", "tciv6", + "tgia7", "tgib7", "tgic7", "tgid7", "tciv7", + "tgia8", "tgib8", "tgic8", "tgid8", "tciv8", "tciu8"; clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; power-domains = <&cpg>; resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; |