7 files changed, 56 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/media/fsl-pxp.txt b/Documentation/devicetree/bindings/media/fsl-pxp.txt
new file mode 100644
index 000000000000..2477e7f87381
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl-pxp.txt
@@ -0,0 +1,26 @@
+Freescale Pixel Pipeline
+========================
+
+The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine
+that supports scaling, colorspace conversion, alpha blending, rotation, and
+pixel conversion via lookup table. Different versions are present on various
+i.MX SoCs from i.MX23 to i.MX7.
+
+Required properties:
+- compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28,
+  imx6dl, imx6sl, imx6ul, imx6sx, imx6ull, or imx7d.
+- reg: the register base and size for the device registers
+- interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d.
+- clock-names: should be "axi"
+- clocks: the PXP AXI clock
+
+Example:
+
+pxp@21cc000 {
+	compatible = "fsl,imx6ull-pxp";
+	reg = <0x021cc000 0x4000>;
+	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "axi";
+	clocks = <&clks IMX6UL_CLK_PXP>;
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
index 21ffb5ed8183..5dddc95f9cc4 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -10,7 +10,11 @@ Required Properties:
     - "adi,adv7481" for the ADV7481
     - "adi,adv7482" for the ADV7482
 
-  - reg: I2C slave address
+  - reg: I2C slave addresses
+    The ADV748x has up to twelve 256-byte maps that can be accessed via the
+    main I2C ports. Each map has it own I2C address and acts as a standard
+    slave device on the I2C bus. The main address is mandatory, others are
+    optional and remain at default values if not specified.
 
 Optional Properties:
 
@@ -18,6 +22,11 @@ Optional Properties:
 		     "intrq3". All interrupts are optional. The "intrq3" interrupt
 		     is only available on the adv7481
   - interrupts: Specify the interrupt lines for the ADV748x
+  - reg-names : Names of maps with programmable addresses.
+		It shall contain all maps needing a non-default address.
+		Possible map names are:
+		  "main", "dpll", "cp", "hdmi", "edid", "repeater",
+		  "infoframe", "cbus", "cec", "sdp", "txa", "txb"
 
 The device node must contain one 'port' child node per device input and output
 port, in accordance with the video interface bindings defined in
@@ -47,7 +56,10 @@ Example:
 
 	video-receiver@70 {
 		compatible = "adi,adv7482";
-		reg = <0x70>;
+		reg = <0x70 0x71 0x72 0x73 0x74 0x75
+		       0x60 0x61 0x62 0x63 0x64 0x65>;
+		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+			    "infoframe", "cbus", "cec", "sdp", "txa", "txb";
 
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -73,7 +85,7 @@ Example:
 			};
 		};
 
-		port@10 {
+		port@a {
 			reg = <10>;
 
 			adv7482_txa: endpoint {
@@ -83,7 +95,7 @@ Example:
 			};
 		};
 
-		port@11 {
+		port@b {
 			reg = <11>;
 
 			adv7482_txb: endpoint {
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index dcf57e7c60eb..b3e688b77a38 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -66,7 +66,7 @@ Example:
 		 * other maps will retain their default addresses.
 		 */
 		reg = <0x4c>, <0x66>;
-		reg-names "main", "edid";
+		reg-names = "main", "edid";
 
 		reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
 		hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
index c4701f1eaaf6..c4701f1eaaf6 100644
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807.txt
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 2f420050d57f..d329a4e8ac58 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -11,6 +11,7 @@ on Gen3 platforms to a CSI-2 receiver.
 
  - compatible: Must be one or more of the following
    - "renesas,vin-r8a7743" for the R8A7743 device
+   - "renesas,vin-r8a7744" for the R8A7744 device
    - "renesas,vin-r8a7745" for the R8A7745 device
    - "renesas,vin-r8a7778" for the R8A7778 device
    - "renesas,vin-r8a7779" for the R8A7779 device
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.txt b/Documentation/devicetree/bindings/media/renesas,ceu.txt
index 8a7a616e9019..3e2a2652eb19 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.txt
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.txt
@@ -17,15 +17,19 @@ Required properties:
 The CEU supports a single parallel input and should contain a single 'port'
 subnode with a single 'endpoint'. Connection to input devices are modeled
 according to the video interfaces OF bindings specified in:
-Documentation/devicetree/bindings/media/video-interfaces.txt
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Optional endpoint properties applicable to parallel input bus described in
 the above mentioned "video-interfaces.txt" file are supported.
 
-- hsync-active: Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-  If property is not present, default is active high.
-- vsync-active: Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-  If property is not present, default is active high.
+- hsync-active: See [1] for description. If property is not present,
+  default is active high.
+- vsync-active: See [1] for description. If property is not present,
+  default is active high.
+- bus-width: See [1] for description. Accepted values are '8' and '16'.
+  If property is not present, default is '8'.
+- field-even-active: See [1] for description. If property is not present,
+  an even field is identified by a logic 0 (active-low signal).
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index baf9d9756b3c..f884ada0bffc 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -100,10 +100,12 @@ Optional endpoint properties
   slave device (data source) by the master device (data sink). In the master
   mode the data source device is also the source of the synchronization signals.
 - bus-type: data bus type. Possible values are:
-  0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656)
   1 - MIPI CSI-2 C-PHY
   2 - MIPI CSI1
   3 - CCP2
+  4 - MIPI CSI-2 D-PHY
+  5 - Parallel
+  6 - Bt.656
 - bus-width: number of data lines actively used, valid for the parallel busses.
 - data-shift: on the parallel data busses, if bus-width is used to specify the
   number of data lines, data-shift can be used to specify which data lines are