diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
5 files changed, 51 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index 5c913d4cf36c..3049cf88bdcf 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -35,6 +35,10 @@ Optional Properties: for each of the battery capacity lookup table. The first temperature value specifies the OCV table 0, and the second temperature value specifies the OCV table 1, and so on. + - resistance-temp-table: An array providing the temperature in degree Celsius + and corresponding battery internal resistance percent, which is used to look + up the resistance percent according to current temperature to get a accurate + batterty internal resistance in different temperatures. Battery properties are named, where possible, for the corresponding elements in enum power_supply_property, defined in @@ -61,6 +65,7 @@ Example: ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...; ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...; ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...; + resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>; }; charger: charger@11 { diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt index dc0568933359..dc9c8f76e06c 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt @@ -1,11 +1,14 @@ Binding for TI bq25890 Li-Ion Charger -This driver will support the bq25896 and the bq25890. There are other ICs -in the same family but those have not been tested. +This driver will support the bq25892, the bq25896 and the bq25890. There are +other ICs in the same family but those have not been tested. Required properties: - compatible: Should contain one of the following: * "ti,bq25890" + * "ti,bq25892" + * "ti,bq25895" + * "ti,bq25896" - reg: integer, i2c address of the device. - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV); - ti,charge-current: integer, maximum charging current (in uA); diff --git a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt new file mode 100644 index 000000000000..4e0186b8380f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt @@ -0,0 +1,33 @@ +max17040_battery +~~~~~~~~~~~~~~~~ + +Required properties : + - compatible : "maxim,max17040" or "maxim,max77836-battery" + - reg: i2c slave address + +Optional properties : +- maxim,alert-low-soc-level : The alert threshold that sets the state of + charge level (%) where an interrupt is + generated. Can be configured from 1 up to 32 + (%). If skipped the power up default value of + 4 (%) will be used. +- interrupts : Interrupt line see Documentation/devicetree/ + bindings/interrupt-controller/interrupts.txt +- wakeup-source : This device has wakeup capabilities. Use this + property to use alert low SOC level interrupt + as wake up source. + +Optional properties support interrupt functionality for alert low state of +charge level, present in some ICs in the same family, and should be used with +compatible "maxim,max77836-battery". + +Example: + + battery-fuel-gauge@36 { + compatible = "maxim,max77836-battery"; + reg = <0x36>; + maxim,alert-low-soc-level = <10>; + interrupt-parent = <&gpio7>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; diff --git a/Documentation/devicetree/bindings/power/supply/max17042_battery.txt b/Documentation/devicetree/bindings/power/supply/max17042_battery.txt index 3f3894aaeebc..f34c5daae9af 100644 --- a/Documentation/devicetree/bindings/power/supply/max17042_battery.txt +++ b/Documentation/devicetree/bindings/power/supply/max17042_battery.txt @@ -2,7 +2,11 @@ max17042_battery ~~~~~~~~~~~~~~~~ Required properties : - - compatible : "maxim,max17042" + - compatible : one of the following + * "maxim,max17042" + * "maxim,max17047" + * "maxim,max17050" + * "maxim,max17055" Optional properties : - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt index 0a5705b8b592..b6359b590383 100644 --- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt +++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt @@ -13,6 +13,8 @@ Required properties: - io-channel-names: Should be "bat-temp" or "charge-vol". - nvmem-cells: A phandle to the calibration cells provided by eFuse device. - nvmem-cell-names: Should be "fgu_calib". +- sprd,calib-resistance-micro-ohms: Specify the real resistance of coulomb counter + chip in micro Ohms. - monitored-battery: Phandle of battery characteristics devicetree node. See Documentation/devicetree/bindings/power/supply/battery.txt @@ -52,5 +54,6 @@ Example: nvmem-cells = <&fgu_calib>; nvmem-cell-names = "fgu_calib"; monitored-battery = <&bat>; + sprd,calib-resistance-micro-ohms = <21500>; }; }; |