summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/sound/ak5386.txt19
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt26
-rw-r--r--Documentation/devicetree/bindings/sound/ti,tas5086.txt32
3 files changed, 72 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/sound/ak5386.txt b/Documentation/devicetree/bindings/sound/ak5386.txt
new file mode 100644
index 000000000000..dc3914fe6ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak5386.txt
@@ -0,0 +1,19 @@
+AK5386 Single-ended 24-Bit 192kHz delta-sigma ADC
+
+This device has no control interface.
+
+Required properties:
+
+ - compatible : "asahi-kasei,ak5386"
+
+Optional properties:
+
+ - reset-gpio : a GPIO spec for the reset/power down pin.
+ If specified, it will be deasserted at probe time.
+
+Example:
+
+spdif: ak5386@0 {
+ compatible = "asahi-kasei,ak5386";
+ reset-gpio = <&gpio0 23>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 1ac7b1642186..0e5c12c66523 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -1,12 +1,22 @@
NVIDIA Tegra30 AHUB (Audio Hub)
Required properties:
-- compatible : "nvidia,tegra30-ahub"
+- compatible : "nvidia,tegra30-ahub", "nvidia,tegra114-ahub", etc.
- reg : Should contain the register physical address and length for each of
- the AHUB's APBIF registers and the AHUB's own registers.
+ the AHUB's register blocks.
+ - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
+ - Tegra114 requires an additional entry, for the APBIF2 register block.
- interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for the first APBIF channel.
+- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
+ entry contains the Tegra DMA controller's phandle and request selector.
+ If a single entry is present, the request selectors for the channels are
+ assumed to be contiguous, and increment from this value.
+ If multiple values are given, one value must be given per channel.
+- clocks : Must contain an entry for each required entry in clock-names.
+- clock-names : Must include the following entries:
+ - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
+ dam1, dam2, spdif_in.
+ - Tegra114: Additionally requires amx, adx.
- ranges : The bus address mapping for the configlink register bus.
Can be empty since the mapping is 1:1.
- #address-cells : For the configlink bus. Should be <1>;
@@ -25,7 +35,13 @@ ahub@70080000 {
reg = <0x70080000 0x200 0x70080200 0x100>;
interrupts = < 0 103 0x04 >;
nvidia,dma-request-selector = <&apbdma 1>;
-
+ clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
+ <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
+ <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
+ <&tegra_car 110>, <&tegra_car 162>;
+ clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ "i2s3", "i2s4", "dam0", "dam1", "dam2",
+ "spdif_in";
ranges;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/sound/ti,tas5086.txt b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
new file mode 100644
index 000000000000..8ea4f5b4818d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
@@ -0,0 +1,32 @@
+Texas Instruments TAS5086 6-channel PWM Processor
+
+Required properties:
+
+ - compatible: Should contain "ti,tas5086".
+ - reg: The i2c address. Should contain <0x1b>.
+
+Optional properties:
+
+ - reset-gpio: A GPIO spec to define which pin is connected to the
+ chip's !RESET pin. If specified, the driver will
+ assert a hardware reset at probe time.
+
+ - ti,charge-period: This property should contain the time in microseconds
+ that closely matches the external single-ended
+ split-capacitor charge period. The hardware chip
+ waits for this period of time before starting the
+ PWM signals. This helps reduce pops and clicks.
+
+ When not specified, the hardware default of 1300ms
+ is retained.
+
+Examples:
+
+ i2c_bus {
+ tas5086@1b {
+ compatible = "ti,tas5086";
+ reg = <0x1b>;
+ reset-gpio = <&gpio 23 0>;
+ ti,charge-period = <156000>;
+ };
+ };