diff options
Diffstat (limited to 'Documentation/devicetree')
147 files changed, 4105 insertions, 896 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index f493d69e6194..dc102c4e4a78 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -102,7 +102,7 @@ Required sub-node properties: [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/power/power-domain.yaml [3] Documentation/devicetree/bindings/thermal/thermal.txt -[4] Documentation/devicetree/bindings/sram/sram.txt +[4] Documentation/devicetree/bindings/sram/sram.yaml [5] Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index 7b83ef43b418..dd04d9d9a1b8 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -109,7 +109,7 @@ Required properties: [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/thermal/thermal.txt -[3] Documentation/devicetree/bindings/sram/sram.txt +[3] Documentation/devicetree/bindings/sram/sram.yaml [4] Documentation/devicetree/bindings/power/power-domain.yaml Example: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt index b82b6a0ae6f7..8c7a4908a849 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt @@ -62,7 +62,7 @@ Timer node: Syscon reboot node: -See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the +See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the detailed list of properties, the two values defined below are specific to the BCM6328-style timer: diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 7a9c3ce2dbef..0d5b61056b10 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -216,7 +216,7 @@ properties: $ref: '/schemas/types.yaml#/definitions/phandle-array' description: | List of phandles to idle state nodes supported - by this cpu (see ./idle-states.txt). + by this cpu (see ./idle-states.yaml). capacity-dmips-mhz: $ref: '/schemas/types.yaml#/definitions/uint32' diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index a8e0b4a813ed..0e17e1f6fb80 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -160,7 +160,7 @@ properties: items: - enum: - armadeus,imx6dl-apf6 # APF6 (Solo) SoM - - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board + - armadeus,imx6dl-apf6dev # APF6 (Solo) SoM on APF6Dev board - eckelmann,imx6dl-ci4x10 - emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt index 115c5be0bd0b..8defacc44dd5 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt @@ -1,7 +1,7 @@ * Hisilicon Hi3519 System Controller Block This bindings use the following binding: -Documentation/devicetree/bindings/mfd/syscon.txt +Documentation/devicetree/bindings/mfd/syscon.yaml Required properties: - compatible: "hisilicon,hi3519-sysctrl". diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt index 06df04cc827a..6ce0b212ec6d 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt @@ -81,4 +81,4 @@ Example: }; }; -[1]. Documentation/devicetree/bindings/arm/idle-states.txt +[1]. Documentation/devicetree/bindings/arm/idle-states.yaml diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt index f301e636fd52..e41490e6979c 100644 --- a/Documentation/devicetree/bindings/arm/omap/mpu.txt +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt @@ -17,7 +17,7 @@ am335x and am437x only: - pm-sram: Phandles to ocmcram nodes to be used for power management. First should be type 'protect-exec' for the driver to use to copy and run PM functions, second should be regular pool to be used for - data region for code. See Documentation/devicetree/bindings/sram/sram.txt + data region for code. See Documentation/devicetree/bindings/sram/sram.yaml for more details. Examples: diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 8ef85420b2ab..5e66934455bb 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -100,13 +100,14 @@ properties: bindings in [1]) must specify this property. [1] Kernel documentation - ARM idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt - - "#power-domain-cells": - description: - The number of cells in a PM domain specifier as per binding in [3]. - Must be 0 as to represent a single PM domain. + Documentation/devicetree/bindings/arm/idle-states.yaml +patternProperties: + "^power-domain-": + allOf: + - $ref: "../power/power-domain.yaml#" + type: object + description: | ARM systems can have multiple cores, sometimes in an hierarchical arrangement. This often, but not always, maps directly to the processor power topology of the system. Individual nodes in a topology have their @@ -122,14 +123,8 @@ properties: helps to implement support for OSI mode and OS implementations may choose to mandate it. - [3] Documentation/devicetree/bindings/power/power_domain.txt - [4] Documentation/devicetree/bindings/power/domain-idle-state.txt - - power-domains: - $ref: '/schemas/types.yaml#/definitions/phandle-array' - description: - List of phandles and PM domain specifiers, as defined by bindings of the - PM domain provider. + [3] Documentation/devicetree/bindings/power/power-domain.yaml + [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml required: - compatible @@ -199,7 +194,7 @@ examples: CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; enable-method = "psci"; power-domains = <&CPU_PD0>; @@ -208,7 +203,7 @@ examples: CPU1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; enable-method = "psci"; power-domains = <&CPU_PD1>; @@ -224,6 +219,9 @@ examples: exit-latency-us = <10>; min-residency-us = <100>; }; + }; + + domain-idle-states { CLUSTER_RET: cluster-retention { compatible = "domain-idle-state"; @@ -247,19 +245,19 @@ examples: compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu-pd0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; domain-idle-states = <&CPU_PWRDN>; power-domains = <&CLUSTER_PD>; }; - CPU_PD1: cpu-pd1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; domain-idle-states = <&CPU_PWRDN>; power-domains = <&CLUSTER_PD>; }; - CLUSTER_PD: cluster-pd { + CLUSTER_PD: power-domain-cluster { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; }; diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 68917bb7c7e8..55f7938c4826 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -52,7 +52,7 @@ required: examples: - | - mlahb: ahb { + mlahb: ahb@38000000 { compatible = "st,mlahb", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index 9fe11ceecdba..80973619342d 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -70,7 +70,6 @@ examples: #size-cells = <0>; pmic@3e3 { - compatible = "..."; reg = <0x3e3>; /* ... */ diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml index 69cfa4a3d562..c604822cda07 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml @@ -40,7 +40,7 @@ additionalProperties: false examples: - | - osc24M: clk@01c20050 { + osc24M: clk@1c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-osc-clk"; reg = <0x01c20050 0x4>; diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml index 07f38def7dc3..43963c3062c8 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml @@ -41,7 +41,7 @@ additionalProperties: false examples: - | - clk@0600005c { + clk@600005c { #clock-cells = <0>; compatible = "allwinner,sun9i-a80-gt-clk"; reg = <0x0600005c 0x4>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index 17f87178f6b8..3647007f82ca 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -42,7 +42,7 @@ properties: be part of GCC and hence the TSENS properties can also be part of the GCC/clock-controller node. For more details on the TSENS properties please refer - Documentation/devicetree/bindings/thermal/qcom-tsens.txt + Documentation/devicetree/bindings/thermal/qcom-tsens.yaml nvmem-cell-names: minItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml index 33c7842917f6..8b9a8f337f16 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -23,6 +23,8 @@ properties: - items: - const: allwinner,sun7i-a20-crypto - const: allwinner,sun4i-a10-crypto + - items: + - const: allwinner,sun8i-a33-crypto reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 86ad617d2327..5ff9cf26ca38 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -43,9 +43,13 @@ properties: - enum: - allwinner,sun8i-h3-tcon-tv - allwinner,sun50i-a64-tcon-tv - - allwinner,sun50i-h6-tcon-tv - const: allwinner,sun8i-a83t-tcon-tv + - items: + - enum: + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml index 5d5d39665119..6009324be967 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml @@ -49,11 +49,7 @@ examples: resets = <&tcon_ch0_clk 0>; port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; + tve0_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_tve0>; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml index 6d72b3d11fbc..c21103869923 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -79,21 +79,15 @@ examples: #size-cells = <0>; anx6345_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - anx6345_in_tcon0: endpoint@0 { - reg = <0>; + anx6345_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_anx6345>; }; }; anx6345_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - anx6345_out_panel: endpoint@0 { - reg = <0>; + anx6345_out_panel: endpoint { remote-endpoint = <&panel_in_edp>; }; }; diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt index 0c0970c210ab..883bcb2604c7 100644 --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt @@ -6,16 +6,22 @@ Required properties: Optional properties: - label: a symbolic name for the connector +- sdtv-standards: limit the supported TV standards on a connector to the given + ones. If not specified all TV standards are allowed. + Possible TV standards are defined in + include/dt-bindings/display/sdtv-standards.h. Required nodes: - Video port for TV input Example ------- +#include <dt-bindings/display/sdtv-standards.h> tv: connector { compatible = "composite-video-connector"; label = "tv"; + sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; port { tv_connector_in: endpoint { diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index 4ebcea7d0c63..a614644c9849 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -37,6 +37,8 @@ examples: dsi@ff450000 { #address-cells = <1>; #size-cells = <0>; + reg = <0xff450000 0x1000>; + panel@0 { compatible = "leadtek,ltk500hd1829"; reg = <0>; diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index 186e5e1c8fa3..22c91beb0541 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -37,6 +37,8 @@ examples: dsi@ff450000 { #address-cells = <1>; #size-cells = <0>; + reg = <0xff450000 0x1000>; + panel@0 { compatible = "xinpeng,xpp055c272"; reg = <0>; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index 678776b6012a..1db608c9eef5 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -174,10 +174,6 @@ examples: }; }; - soc@1c00000 { - lcdc0: lcdc@1c0c000 { - compatible = "allwinner,sun4i-a10-lcdc"; - }; - }; + lcdc0: lcdc { }; ... diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt index 7bf1bb444812..aac617acb64f 100644 --- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt @@ -37,7 +37,7 @@ Optional nodes: supports a single port with a single endpoint. - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and - Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting + Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting tfp410 DVI encoder or lcd panel to lcdc [1] There is an errata about AM335x color wiring. For 16-bit color mode diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 8b5c346f23f6..34780d7535b8 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -143,7 +143,7 @@ examples: #size-cells = <2>; dma-coherent; dma-ranges; - ranges; + ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>; ti,sci-dev-id = <118>; @@ -169,16 +169,4 @@ examples: ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */ }; }; - - mcasp0: mcasp@02B00000 { - dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; - dma-names = "tx", "rx"; - }; - - crypto: crypto@4E00000 { - compatible = "ti,sa2ul-crypto"; - - dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>; - dma-names = "tx", "rx1", "rx2"; - }; }; diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml new file mode 100644 index 000000000000..9272d2bd8634 --- /dev/null +++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/edac/dmc-520.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM DMC-520 EDAC bindings + +maintainers: + - Lei Wang <lewan@microsoft.com> + +description: |+ + DMC-520 node is defined to describe DRAM error detection and correction. + + https://static.docs.arm.com/100000/0200/corelink_dmc520_trm_100000_0200_01_en.pdf + +properties: + compatible: + items: + - const: brcm,dmc-520 + - const: arm,dmc-520 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 10 + + interrupt-names: + minItems: 1 + maxItems: 10 + items: + enum: + - ram_ecc_errc + - ram_ecc_errd + - dram_ecc_errc + - dram_ecc_errd + - failed_access + - failed_prog + - link_err + - temperature_event + - arch_fsm + - phy_request + +required: + - compatible + - reg + - interrupts + - interrupt-names + +examples: + - | + dmc0: dmc@200000 { + compatible = "brcm,dmc-520", "arm,dmc-520"; + reg = <0x200000 0x80000>; + interrupts = <0x0 0x349 0x4>, <0x0 0x34B 0x4>; + interrupt-names = "dram_ecc_errc", "dram_ecc_errd"; + }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml new file mode 100644 index 000000000000..893d81e54caa --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached SPI controllers + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this + node will always be a child of an FSI CFAM node; see fsi.txt for details on + FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of + SPI controllers. + +properties: + compatible: + enum: + - ibm,fsi2spi + + reg: + items: + - description: FSI slave address + +required: + - compatible + - reg + +examples: + - | + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 4ea6a8789699..e8b99adcb1bd 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -84,31 +84,31 @@ examples: gpu_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@533000000 { + opp-533000000 { opp-hz = /bits/ 64 <533000000>; opp-microvolt = <1250000>; }; - opp@450000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-microvolt = <1150000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1125000>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; opp-microvolt = <1075000>; }; - opp@266000000 { + opp-266000000 { opp-hz = /bits/ 64 <266000000>; opp-microvolt = <1025000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <925000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <912500>; }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 36f59b3ade71..8d966f3ff3db 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -138,31 +138,31 @@ examples: gpu_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@533000000 { + opp-533000000 { opp-hz = /bits/ 64 <533000000>; opp-microvolt = <1250000>; }; - opp@450000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-microvolt = <1150000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1125000>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; opp-microvolt = <1075000>; }; - opp@266000000 { + opp-266000000 { opp-hz = /bits/ 64 <266000000>; opp-microvolt = <1025000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <925000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <912500>; }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml new file mode 100644 index 000000000000..57a240d2d026 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI FAN Control Device Tree Bindings + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: |+ + Bindings for the Analog Devices AXI FAN Control driver. Spefications of the + core can be found in: + + https://wiki.analog.com/resources/fpga/docs/axi_fan_control + +properties: + compatible: + enum: + - adi,axi-fan-control-1.00.a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + pulses-per-revolution: + description: + Value specifying the number of pulses per revolution of the controlled + FAN. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] + +required: + - compatible + - reg + - clocks + - interrupts + - pulses-per-revolution + +examples: + - | + fpga_axi: fpga-axi@0 { + #address-cells = <0x2>; + #size-cells = <0x1>; + + axi_fan_control: axi-fan-control@80000000 { + compatible = "adi,axi-fan-control-1.00.a"; + reg = <0x0 0x80000000 0x10000>; + clocks = <&clk 71>; + interrupts = <0 110 0>; + pulses-per-revolution = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml new file mode 100644 index 000000000000..76985034ea73 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/adt7475.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADT7475 hwmon sensor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + +description: | + The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple + PWN fan controllers. + + They support monitoring and controlling up to four fans (the ADT7490 can only + control up to three). They support reading a single on chip temperature + sensor and two off chip temperature sensors (the ADT7490 additionally + supports measuring up to three current external temperature sensors with + series resistance cancellation (SRC)). + + Datasheets: + https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF + + Description taken from onsemiconductors specification sheets, with minor + rephrasing. + +properties: + compatible: + enum: + - adi,adt7473 + - adi,adt7475 + - adi,adt7476 + - adi,adt7490 + + reg: + maxItems: 1 + +patternProperties: + "^adi,bypass-attenuator-in[0-4]$": + description: | + Configures bypassing the individual voltage input attenuator. If + set to 1 the attenuator is bypassed if set to 0 the attenuator is + not bypassed. If the property is absent then the attenuator + retains it's configuration from the bios/bootloader. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1] + + "^adi,pwm-active-state$": + description: | + Integer array, represents the active state of the pwm outputs If set to 0 + the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm + uses a logic high output for 100% duty cycle. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + default: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + adi,bypass-attenuator-in0 = <1>; + adi,bypass-attenuator-in1 = <0>; + adi,pwm-active-state = <1 0 1>; + }; + }; + diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt index b428a70a7cc0..4e7f6215a453 100644 --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -2,20 +2,30 @@ ltc2978 Required properties: - compatible: should contain one of: + * "lltc,ltc2972" * "lltc,ltc2974" * "lltc,ltc2975" * "lltc,ltc2977" * "lltc,ltc2978" + * "lltc,ltc2979" * "lltc,ltc2980" * "lltc,ltc3880" * "lltc,ltc3882" * "lltc,ltc3883" + * "lltc,ltc3884" * "lltc,ltc3886" * "lltc,ltc3887" + * "lltc,ltc3889" + * "lltc,ltc7880" * "lltc,ltm2987" + * "lltc,ltm4664" * "lltc,ltm4675" * "lltc,ltm4676" + * "lltc,ltm4677" + * "lltc,ltm4678" + * "lltc,ltm4680" * "lltc,ltm4686" + * "lltc,ltm4700" - reg: I2C slave address Optional properties: @@ -25,13 +35,17 @@ Optional properties: standard binding for regulators; see regulator.txt. Valid names of regulators depend on number of supplies supported per device: + * ltc2972 vout0 - vout1 * ltc2974, ltc2975 : vout0 - vout3 - * ltc2977, ltc2980, ltm2987 : vout0 - vout7 + * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 * ltc2978 : vout0 - vout7 - * ltc3880, ltc3882, ltc3886 : vout0 - vout1 + * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 + * ltc7880 : vout0 - vout1 * ltc3883 : vout0 - * ltm4676 : vout0 - vout1 - * ltm4686 : vout0 - vout1 + * ltm4664 : vout0 - vout1 + * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 + * ltm4680, ltm4686 : vout0 - vout1 + * ltm4700 : vout0 - vout1 Example: ltc2978@5e { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml new file mode 100644 index 000000000000..a11b918e0016 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7923.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs. + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Patrick Vasseur <patrick.vasseur@c-s.fr> + +description: | + Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908, + AD7918, AD7928 8 Channels ADCs. + + Specifications about the part can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7904_7914_7924.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7908_7918_7928.pdf + +properties: + compatible: + enum: + - adi,ad7904 + - adi,ad7914 + - adi,ad7923 + - adi,ad7924 + - adi,ad7908 + - adi,ad7918 + - adi,ad7928 + + reg: + maxItems: 1 + + refin-supply: + description: | + The regulator supply for ADC reference voltage. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad7928: adc@0 { + compatible = "adi,ad7928"; + reg = <0>; + spi-max-frequency = <25000000>; + refin-supply = <&adc_vref>; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt deleted file mode 100644 index 94a9011dd860..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/max1363.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC) - -The node for this driver must be a child node of a I2C controller, hence -all mandatory properties for your controller must be specified. See directory: - - Documentation/devicetree/bindings/i2c - -for more details. - -Required properties: - - compatible: Should be one of - "maxim,max1361" - "maxim,max1362" - "maxim,max1363" - "maxim,max1364" - "maxim,max1036" - "maxim,max1037" - "maxim,max1038" - "maxim,max1039" - "maxim,max1136" - "maxim,max1137" - "maxim,max1138" - "maxim,max1139" - "maxim,max1236" - "maxim,max1237" - "maxim,max1238" - "maxim,max1239" - "maxim,max11600" - "maxim,max11601" - "maxim,max11602" - "maxim,max11603" - "maxim,max11604" - "maxim,max11605" - "maxim,max11606" - "maxim,max11607" - "maxim,max11608" - "maxim,max11609" - "maxim,max11610" - "maxim,max11611" - "maxim,max11612" - "maxim,max11613" - "maxim,max11614" - "maxim,max11615" - "maxim,max11616" - "maxim,max11617" - "maxim,max11644" - "maxim,max11645" - "maxim,max11646" - "maxim,max11647" - - reg: Should contain the ADC I2C address - -Optional properties: - - vcc-supply: phandle to the regulator that provides power to the ADC. - - vref-supply: phandle to the regulator for ADC reference voltage. - - interrupts: IRQ line for the ADC. If not used the driver will use - polling. - -Example: -adc: max11644@36 { - compatible = "maxim,max11644"; - reg = <0x36>; - vref-supply = <&adc_vref>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml new file mode 100644 index 000000000000..a0ebb4680140 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1238.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1238 and similar ADCs + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Family of simple ADCs with i2c inteface and internal references. + +properties: + compatible: + enum: + - maxim,max1036 + - maxim,max1037 + - maxim,max1038 + - maxim,max1039 + - maxim,max1136 + - maxim,max1137 + - maxim,max1138 + - maxim,max1139 + - maxim,max1236 + - maxim,max1237 + - maxim,max1238 + - maxim,max1239 + - maxim,max11600 + - maxim,max11601 + - maxim,max11602 + - maxim,max11603 + - maxim,max11604 + - maxim,max11605 + - maxim,max11606 + - maxim,max11607 + - maxim,max11608 + - maxim,max11609 + - maxim,max11610 + - maxim,max11611 + - maxim,max11612 + - maxim,max11613 + - maxim,max11614 + - maxim,max11615 + - maxim,max11616 + - maxim,max11617 + - maxim,max11644 + - maxim,max11645 + - maxim,max11646 + - maxim,max11647 + + reg: + maxItems: 1 + + vcc-supply: true + vref-supply: + description: Optional external reference. If not supplied, internal + reference will be used. + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@36 { + compatible = "maxim,max1238"; + reg = <0x36>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml new file mode 100644 index 000000000000..48377549c39a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1363.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1363 and similar ADCs + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Family of ADCs with i2c inteface, internal references and threshold + monitoring. + +properties: + compatible: + enum: + - maxim,max1361 + - maxim,max1362 + - maxim,max1363 + - maxim,max1364 + + reg: + maxItems: 1 + + vcc-supply: true + vref-supply: + description: Optional external reference. If not supplied, internal + reference will be used. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@36 { + compatible = "maxim,max1363"; + reg = <0x36>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt index eb939fe77836..ef8eeec1a997 100644 --- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt @@ -6,6 +6,7 @@ Required properties: - compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC. - reg: specifies physical base address and size of the registers. - interrupts: Contain the ADC interrupt with flags for falling edge. +- resets : phandle to the reset control for this device. Optional properties: - clocks: phandle of ADC reference clock, in case the clock is not @@ -21,4 +22,5 @@ adc: adc@f000c000 { reg = <0xf000c000 0x8>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk NPCM7XX_CLK_ADC>; + resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>; }; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index f46de17c0878..cc3c8ea6a894 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -123,7 +123,7 @@ examples: samsung,syscon-phandle = <&pmu_system_controller>; /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { + ncp15wb473 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt deleted file mode 100644 index 8de933146771..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ /dev/null @@ -1,149 +0,0 @@ -STMicroelectronics STM32 ADC device driver - -STM32 ADC is a successive approximation analog-to-digital converter. -It has several multiplexed input channels. Conversions can be performed -in single, continuous, scan or discontinuous mode. Result of the ADC is -stored in a left-aligned or right-aligned 32-bit data register. -Conversions can be launched in software or using hardware triggers. - -The analog watchdog feature allows the application to detect if the input -voltage goes beyond the user-defined, higher or lower thresholds. - -Each STM32 ADC block can have up to 3 ADC instances. - -Each instance supports two contexts to manage conversions, each one has its -own configurable sequence and trigger: -- regular conversion can be done in sequence, running in background -- injected conversions have higher priority, and so have the ability to - interrupt regular conversion sequence (either triggered in SW or HW). - Regular sequence is resumed, in case it has been interrupted. - -Contents of a stm32 adc root node: ------------------------------------ -Required properties: -- compatible: Should be one of: - "st,stm32f4-adc-core" - "st,stm32h7-adc-core" - "st,stm32mp1-adc-core" -- reg: Offset and length of the ADC block register set. -- interrupts: One or more interrupts for ADC block. Some parts like stm32f4 - and stm32h7 share a common ADC interrupt line. stm32mp1 has two separate - interrupt lines, one for each ADC within ADC block. -- clocks: Core can use up to two clocks, depending on part used: - - "adc" clock: for the analog circuitry, common to all ADCs. - It's required on stm32f4. - It's optional on stm32h7. - - "bus" clock: for registers access, common to all ADCs. - It's not present on stm32f4. - It's required on stm32h7. -- clock-names: Must be "adc" and/or "bus" depending on part used. -- interrupt-controller: Identifies the controller node as interrupt-parent -- vdda-supply: Phandle to the vdda input analog voltage. -- vref-supply: Phandle to the vref input analog reference voltage. -- #interrupt-cells = <1>; -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- A pinctrl state named "default" for each ADC channel may be defined to set - inX ADC pins in mode of operation for analog input on external pin. -- booster-supply: Phandle to the embedded booster regulator that can be used - to supply ADC analog input switches on stm32h7 and stm32mp1. -- vdd-supply: Phandle to the vdd input voltage. It can be used to supply ADC - analog input switches on stm32mp1. -- st,syscfg: Phandle to system configuration controller. It can be used to - control the analog circuitry on stm32mp1. -- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog - circuitry. - -Contents of a stm32 adc child node: ------------------------------------ -An ADC block node should contain at least one subnode, representing an -ADC instance available on the machine. - -Required properties: -- compatible: Should be one of: - "st,stm32f4-adc" - "st,stm32h7-adc" - "st,stm32mp1-adc" -- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200). -- clocks: Input clock private to this ADC instance. It's required only on - stm32f4, that has per instance clock input for registers access. -- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or - 2 for adc@200). -- st,adc-channels: List of single-ended channels muxed for this ADC. - It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered - from 0 to 15 or 19 (resp. for in0..in15 or in0..in19). -- st,adc-diff-channels: List of differential channels muxed for this ADC. - Depending on part used, some channels can be configured as differential - instead of single-ended (e.g. stm32h7). List here positive and negative - inputs pairs as <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered - from 0 to 19 on stm32h7) - Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is required. - Both properties can be used together. Some channels can be used as - single-ended and some other ones as differential (mixed). But channels - can't be configured both as single-ended and differential (invalid). -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in - Documentation/devicetree/bindings/iio/iio-bindings.txt - -Optional properties: -- dmas: Phandle to dma channel for this ADC instance. - See ../../dma/dma.txt for details. -- dma-names: Must be "rx" when dmas property is being used. -- assigned-resolution-bits: Resolution (bits) to use for conversions. Must - match device available resolutions: - * can be 6, 8, 10 or 12 on stm32f4 - * can be 8, 10, 12, 14 or 16 on stm32h7 - Default is maximum resolution if unset. -- st,min-sample-time-nsecs: Minimum sampling time in nanoseconds. - Depending on hardware (board) e.g. high/low analog input source impedance, - fine tune of ADC sampling time may be recommended. - This can be either one value or an array that matches 'st,adc-channels' list, - to set sample time resp. for all channels, or independently for each channel. - -Example: - adc: adc@40012000 { - compatible = "st,stm32f4-adc-core"; - reg = <0x40012000 0x400>; - interrupts = <18>; - clocks = <&rcc 0 168>; - clock-names = "adc"; - vref-supply = <®_vref>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&adc3_in8_pin>; - - #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - adc@0 { - compatible = "st,stm32f4-adc"; - #io-channel-cells = <1>; - reg = <0x0>; - clocks = <&rcc 0 168>; - interrupt-parent = <&adc>; - interrupts = <0>; - st,adc-channels = <8>; - dmas = <&dma2 0 0 0x400 0x0>; - dma-names = "rx"; - assigned-resolution-bits = <8>; - }; - ... - other adc child nodes follow... - }; - -Example to setup: -- channel 1 as single-ended -- channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) - - adc: adc@40022000 { - compatible = "st,stm32h7-adc-core"; - ... - adc1: adc@0 { - compatible = "st,stm32h7-adc"; - ... - st,adc-channels = <1>; - st,adc-diff-channels = <2 6>, <3 7>; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml new file mode 100644 index 000000000000..933ba37944d7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -0,0 +1,458 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 ADC bindings + +description: | + STM32 ADC is a successive approximation analog-to-digital converter. + It has several multiplexed input channels. Conversions can be performed + in single, continuous, scan or discontinuous mode. Result of the ADC is + stored in a left-aligned or right-aligned 32-bit data register. + Conversions can be launched in software or using hardware triggers. + + The analog watchdog feature allows the application to detect if the input + voltage goes beyond the user-defined, higher or lower thresholds. + + Each STM32 ADC block can have up to 3 ADC instances. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +properties: + compatible: + enum: + - st,stm32f4-adc-core + - st,stm32h7-adc-core + - st,stm32mp1-adc-core + + reg: + maxItems: 1 + + interrupts: + description: | + One or more interrupts for ADC block, depending on part used: + - stm32f4 and stm32h7 share a common ADC interrupt line. + - stm32mp1 has two separate interrupt lines, one for each ADC within + ADC block. + minItems: 1 + maxItems: 2 + + clocks: + description: | + Core can use up to two clocks, depending on part used: + - "adc" clock: for the analog circuitry, common to all ADCs. + It's required on stm32f4. + It's optional on stm32h7 and stm32mp1. + - "bus" clock: for registers access, common to all ADCs. + It's not present on stm32f4. + It's required on stm32h7 and stm32mp1. + + clock-names: true + + st,max-clk-rate-hz: + description: + Allow to specify desired max clock rate used by analog circuitry. + + vdda-supply: + description: Phandle to the vdda input analog voltage. + + vref-supply: + description: Phandle to the vref input analog reference voltage. + + booster-supply: + description: + Phandle to the embedded booster regulator that can be used to supply ADC + analog input switches on stm32h7 and stm32mp1. + + vdd-supply: + description: + Phandle to the vdd input voltage. It can be used to supply ADC analog + input switches on stm32mp1. + + st,syscfg: + description: + Phandle to system configuration controller. It can be used to control the + analog circuitry on stm32mp1. + allOf: + - $ref: "/schemas/types.yaml#/definitions/phandle-array" + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-adc-core + + then: + properties: + clocks: + maxItems: 1 + + clock-names: + const: adc + + interrupts: + items: + - description: interrupt line common for all ADCs + + st,max-clk-rate-hz: + minimum: 600000 + maximum: 36000000 + default: 36000000 + + booster-supply: false + + vdd-supply: false + + st,syscfg: false + + - if: + properties: + compatible: + contains: + const: st,stm32h7-adc-core + + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: bus + - const: adc + minItems: 1 + maxItems: 2 + + interrupts: + items: + - description: interrupt line common for all ADCs + + st,max-clk-rate-hz: + minimum: 120000 + maximum: 36000000 + default: 36000000 + + vdd-supply: false + + st,syscfg: false + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-adc-core + + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: bus + - const: adc + minItems: 1 + maxItems: 2 + + interrupts: + items: + - description: interrupt line for ADC1 + - description: interrupt line for ADC2 + + st,max-clk-rate-hz: + minimum: 120000 + maximum: 36000000 + default: 36000000 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vdda-supply + - vref-supply + - interrupt-controller + - '#interrupt-cells' + - '#address-cells' + - '#size-cells' + +patternProperties: + "^adc@[0-9]+$": + type: object + description: + An ADC block node should contain at least one subnode, representing an + ADC instance available on the machine. + + properties: + compatible: + enum: + - st,stm32f4-adc + - st,stm32h7-adc + - st,stm32mp1-adc + + reg: + description: | + Offset of ADC instance in ADC block. Valid values are: + - 0x0: ADC1 + - 0x100: ADC2 + - 0x200: ADC3 (stm32f4 only) + maxItems: 1 + + '#io-channel-cells': + const: 1 + + interrupts: + description: | + IRQ Line for the ADC instance. Valid values are: + - 0 for adc@0 + - 1 for adc@100 + - 2 for adc@200 (stm32f4 only) + maxItems: 1 + + clocks: + description: + Input clock private to this ADC instance. It's required only on + stm32f4, that has per instance clock input for registers access. + maxItems: 1 + + dmas: + description: RX DMA Channel + maxItems: 1 + + dma-names: + const: rx + + assigned-resolution-bits: + description: | + Resolution (bits) to use for conversions: + - can be 6, 8, 10 or 12 on stm32f4 + - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + st,adc-channels: + description: | + List of single-ended channels muxed for this ADC. It can have up to: + - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 + - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and + stm32mp1. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + + st,adc-diff-channels: + description: | + List of differential channels muxed for this ADC. Some channels can + be configured as differential instead of single-ended on stm32h7 and + on stm32mp1. Positive and negative inputs pairs are listed: + <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered from 0 to 19. + + Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is + required. Both properties can be used together. Some channels can be + used as single-ended and some other ones as differential (mixed). But + channels can't be configured both as single-ended and differential. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "vinp" indicates positive input number + minimum: 0 + maximum: 19 + - description: | + "vinn" indicates negative input number + minimum: 0 + maximum: 19 + + st,min-sample-time-nsecs: + description: + Minimum sampling time in nanoseconds. Depending on hardware (board) + e.g. high/low analog input source impedance, fine tune of ADC + sampling time may be recommended. This can be either one value or an + array that matches "st,adc-channels" and/or "st,adc-diff-channels" + list, to set sample time resp. for all channels, or independently for + each channel. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + + allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-adc + + then: + properties: + reg: + enum: + - 0x0 + - 0x100 + - 0x200 + + interrupts: + minimum: 0 + maximum: 2 + + assigned-resolution-bits: + enum: [6, 8, 10, 12] + default: 12 + + st,adc-channels: + minItems: 1 + maxItems: 16 + items: + minimum: 0 + maximum: 15 + + st,adc-diff-channels: false + + st,min-sample-time-nsecs: + minItems: 1 + maxItems: 16 + items: + minimum: 80 + + required: + - clocks + + - if: + properties: + compatible: + contains: + enum: + - st,stm32h7-adc + - st,stm32mp1-adc + + then: + properties: + reg: + enum: + - 0x0 + - 0x100 + + interrupts: + minimum: 0 + maximum: 1 + + assigned-resolution-bits: + enum: [8, 10, 12, 14, 16] + default: 16 + + st,adc-channels: + minItems: 1 + maxItems: 20 + items: + minimum: 0 + maximum: 19 + + st,min-sample-time-nsecs: + minItems: 1 + maxItems: 20 + items: + minimum: 40 + + additionalProperties: false + + anyOf: + - required: + - st,adc-channels + - required: + - st,adc-diff-channels + + required: + - compatible + - reg + - interrupts + - '#io-channel-cells' + +examples: + - | + // Example 1: with stm32f429, ADC1, single-ended channel 8 + adc123: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 168>; + clock-names = "adc"; + st,max-clk-rate-hz = <36000000>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 168>; + interrupt-parent = <&adc123>; + interrupts = <0>; + st,adc-channels = <8>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; + assigned-resolution-bits = <8>; + }; + // ... + // other adc child nodes follow... + }; + + - | + // Example 2: with stm32mp157c to setup ADC1 with: + // - channels 0 & 1 as single-ended + // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + adc12: adc@48003000 { + compatible = "st,stm32mp1-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC12>, <&rcc ADC12_K>; + clock-names = "bus", "adc"; + booster-supply = <&booster>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; + st,syscfg = <&syscfg>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc12>; + interrupts = <0>; + st,adc-channels = <0 1>; + st,adc-diff-channels = <2 6>, <3 7>; + st,min-sample-time-nsecs = <5000>; + dmas = <&dmamux1 9 0x400 0x05>; + dma-names = "rx"; + }; + // ... + // other adc child node follow... + }; + +... diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml new file mode 100644 index 000000000000..1c6d49685e9f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HMC425A 6-bit Digital Step Attenuator + +maintainers: +- Michael Hennerich <michael.hennerich@analog.com> +- Beniamin Bia <beniamin.bia@analog.com> + +description: | + Digital Step Attenuator IIO device with gpio interface. + HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + +properties: + compatible: + enum: + - adi,hmc425a + + vcc-supply: true + + ctrl-gpios: + description: + Must contain an array of 6 GPIO specifiers, referring to the GPIO pins + connected to the control pins V1-V6. + minItems: 6 + maxItems: 6 + +required: + - compatible + - ctrl-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + gpio_hmc425a: hmc425a { + compatible = "adi,hmc425a"; + ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>, + <&gpio 39 GPIO_ACTIVE_HIGH>, + <&gpio 38 GPIO_ACTIVE_HIGH>, + <&gpio 37 GPIO_ACTIVE_HIGH>, + <&gpio 36 GPIO_ACTIVE_HIGH>, + <&gpio 35 GPIO_ACTIVE_HIGH>; + vcc-supply = <&foo>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt deleted file mode 100644 index f4320595b851..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Atlas Scientific EC-SM OEM sensor - -http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf - -Required properties: - - - compatible: must be "atlas,ec-sm" - - reg: the I2C address of the sensor - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -atlas@64 { - compatible = "atlas,ec-sm"; - reg = <0x64>; - interrupt-parent = <&gpio1>; - interrupts = <16 2>; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt deleted file mode 100644 index af1f5a9aa4da..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Atlas Scientific ORP-SM OEM sensor - -https://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf - -Required properties: - - - compatible: must be "atlas,orp-sm" - - reg: the I2C address of the sensor - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -atlas@66 { - compatible = "atlas,orp-sm"; - reg = <0x66>; - interrupt-parent = <&gpio1>; - interrupts = <16 2>; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt deleted file mode 100644 index 79d90f060327..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Atlas Scientific pH-SM OEM sensor - -http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf - -Required properties: - - - compatible: must be "atlas,ph-sm" - - reg: the I2C address of the sensor - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -atlas@65 { - compatible = "atlas,ph-sm"; - reg = <0x65>; - interrupt-parent = <&gpio1>; - interrupts = <16 2>; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml new file mode 100644 index 000000000000..edcd2904d50e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/atlas,sensor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atlas Scientific OEM sensors + +maintainers: + - Matt Ranostay <matt.ranostay@konsulko.com> + +description: | + Atlas Scientific OEM sensors connected via I2C + + Datasheets: + http://www.atlas-scientific.com/_files/_datasheets/_oem/DO_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf + +properties: + compatible: + enum: + - atlas,do-sm + - atlas,ec-sm + - atlas,orp-sm + - atlas,ph-sm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + atlas@66 { + compatible = "atlas,orp-sm"; + reg = <0x66>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml new file mode 100644 index 000000000000..d9c25cf4b92f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5770R DAC device driver + +maintainers: + - Mircea Caprioru <mircea.caprioru@analog.com> + +description: | + Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf + +properties: + compatible: + enum: + - adi,ad5770r + + reg: + maxItems: 1 + + avdd-supply: + description: + AVdd voltage supply. Represents two different supplies in the datasheet + that are in fact the same. + + iovdd-supply: + description: + Voltage supply for the chip interface. + + vref-supply: + description: Specify the voltage of the external reference used. + Available reference options are 1.25 V or 2.5 V. If no + external reference declared then the device will use the + internal reference of 1.25 V. + + adi,external-resistor: + description: Specify if an external 2.5k ohm resistor is used. If not + specified the device will use an internal 2.5k ohm resistor. + The precision resistor is used for reference current generation. + type: boolean + + reset-gpios: + description: GPIO spec for the RESET pin. If specified, it will be + asserted during driver probe. + maxItems: 1 + + channel0: + description: Represents an external channel which are + connected to the DAC. Channel 0 can act both as a current + source and sink. + type: object + + properties: + num: + description: This represents the channel number. + items: + const: 0 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - $ref: /schemas/types.yaml#/definitions/int32-array + - items: + - enum: [0 300000] + - enum: [-60000 0] + - enum: [-60000 300000] + + channel1: + description: Represents an external channel which are + connected to the DAC. + type: object + + properties: + num: + description: This represents the channel number. + items: + const: 1 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - enum: [0 140000] + - enum: [0 250000] + + channel2: + description: Represents an external channel which are + connected to the DAC. + type: object + + properties: + num: + description: This represents the channel number. + items: + const: 2 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - enum: [0 140000] + - enum: [0 250000] + +patternProperties: + "^channel@([3-5])$": + type: object + description: Represents the external channels which are connected to the DAC. + properties: + num: + description: This represents the channel number. + items: + minimum: 3 + maximum: 5 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - enum: [0 45000] + - enum: [0 100000] + +required: +- reg +- diff-channels +- channel0 +- channel1 +- channel2 +- channel3 +- channel4 +- channel5 + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad5770r@0 { + compatible = "ad5770r"; + reg = <0>; + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + adi,external-resistor; + reset-gpios = <&gpio 22 0>; + + channel@0 { + num = <0>; + adi,range-microamp = <(-60000) 300000>; + }; + + channel@1 { + num = <1>; + adi,range-microamp = <0 140000>; + }; + + channel@2 { + num = <2>; + adi,range-microamp = <0 55000>; + }; + + channel@3 { + num = <3>; + adi,range-microamp = <0 45000>; + }; + + channel@4 { + num = <4>; + adi,range-microamp = <0 45000>; + }; + + channel@5 { + num = <5>; + adi,range-microamp = <0 45000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt index e0d5fea33031..338c3220f01a 100644 --- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt +++ b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt @@ -1,4 +1,4 @@ -Linear Technology LTC2632 DAC device driver +Linear Technology LTC2632/2636 DAC Required properties: - compatible: Has to contain one of the following: @@ -8,6 +8,12 @@ Required properties: lltc,ltc2632-h12 lltc,ltc2632-h10 lltc,ltc2632-h8 + lltc,ltc2636-l12 + lltc,ltc2636-l10 + lltc,ltc2636-l8 + lltc,ltc2636-h12 + lltc,ltc2636-h10 + lltc,ltc2636-h8 Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt apply. In particular, "reg" and "spi-max-frequency" properties must be given. diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt index c5ee8a20af9f..f2f64749e818 100644 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -4,6 +4,7 @@ http://www.invensense.com/mems/gyro/mpu6050.html Required properties: - compatible : should be one of + "invensense,mpu6000" "invensense,mpu6050" "invensense,mpu6500" "invensense,mpu6515" @@ -11,7 +12,11 @@ Required properties: "invensense,mpu9250" "invensense,mpu9255" "invensense,icm20608" + "invensense,icm20609" + "invensense,icm20689" "invensense,icm20602" + "invensense,icm20690" + "invensense,iam20680" - reg : the I2C address of the sensor - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml new file mode 100644 index 000000000000..f671edda6641 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/dynaimage,al3010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dyna-Image AL3010 sensor + +maintainers: + - David Heidelberg <david@ixit.cz> + +properties: + compatible: + const: dynaimage,al3010 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@1c { + compatible = "dynaimage,al3010"; + reg = <0x1c>; + vdd-supply = <&vdd_reg>; + interrupts = <0 99 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml new file mode 100644 index 000000000000..497300239d93 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/dynaimage,al3320a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dyna-Image AL3320A sensor + +maintainers: + - David Heidelberg <david@ixit.cz> + +properties: + compatible: + const: dynaimage,al3320a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@1c { + compatible = "dynaimage,al3320a"; + reg = <0x1c>; + vdd-supply = <&vdd_reg>; + interrupts = <0 99 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml new file mode 100644 index 000000000000..12aa16f24772 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/sharp,gp2ap002.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp GP2AP002A00F and GP2AP002S00F proximity and ambient light sensors + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + Proximity and ambient light sensor with IR LED for the proximity + sensing and an analog output for light intensity. The ambient light + sensor output is not available on the GP2AP002S00F variant. + +properties: + compatible: + enum: + - sharp,gp2ap002a00f + - sharp,gp2ap002s00f + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: an interrupt for proximity, usually a GPIO line + + vdd-supply: + description: VDD power supply a phandle to a regulator + + vio-supply: + description: VIO power supply a phandle to a regulator + + io-channels: + maxItems: 1 + description: ALSOUT ADC channel to read the ambient light + + io-channel-names: + const: alsout + + sharp,proximity-far-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Hysteresis setting for "far" object detection, this setting is + device-unique and adjust the optical setting for proximity detection + of a "far away" object in front of the sensor. + + sharp,proximity-close-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Hysteresis setting for "close" object detection, this setting is + device-unique and adjust the optical setting for proximity detection + of a "close" object in front of the sensor. + +required: + - compatible + - reg + - interrupts + - sharp,proximity-far-hysteresis + - sharp,proximity-close-hysteresis + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd_regulator>; + vio-supply = <&vio_regulator>; + io-channels = <&adc_channel>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml index 4e80ea7c1475..8afbac24c34e 100644 --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml @@ -51,6 +51,24 @@ properties: the time between two interrupts is measured in the driver. maxItems: 1 + power-gpios: + description: + Definition of the GPIO for power management of connected peripheral + (output). + This GPIO can be used by the external hardware for power management. + When the device gets suspended it's switched off and when it resumes + it's switched on again. After some period of inactivity the driver + get suspended automatically (autosuspend feature). + maxItems: 1 + + startup-time-ms: + description: + This is the startup time the device needs after a resume to be up and + running. + minimum: 0 + maximum: 1000 + default: 100 + required: - compatible - trig-gpios diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt index ef2ae729718f..921172f689b8 100644 --- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt +++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt @@ -5,6 +5,7 @@ Required properties: * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board * "cypress,midas-touchkey" - for the touchkey found on midas boards * "cypress,aries-touchkey" - for the touchkey found on aries boards + * "coreriver,tc360-touchkey" - for the Coreriver TouchCore 360 touchkey - reg: I2C address of the chip. - interrupts: interrupt to which the chip is connected (see interrupt binding[0]). diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index d7c3262b2494..c99ed3934d7e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -62,7 +62,7 @@ required: examples: - | - i2c@00000000 { + i2c { #address-cells = <1>; #size-cells = <0>; gt928@5d { diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt index c864a46cddcf..f5021214edec 100644 --- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt +++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt @@ -1,7 +1,7 @@ Texas Instruments TWL family (twl4030) pwrbutton module This module is part of the TWL4030. For more details about the whole -chip see Documentation/devicetree/bindings/mfd/twl-familly.txt. +chip see Documentation/devicetree/bindings/mfd/twl-family.txt. This module provides a simple power button event via an Interrupt. diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index d97d099b87e5..c60b994fe116 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -85,7 +85,7 @@ properties: # LED will act as a back-light, controlled by the framebuffer system - backlight # LED will turn on (but for leds-gpio see "default-state" property in - # Documentation/devicetree/bindings/leds/leds-gpio.txt) + # Documentation/devicetree/bindings/leds/leds-gpio.yaml) - default-on # LED "double" flashes at a load average based rate - heartbeat diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt index cf1ea403ba7a..c7af6f70a97b 100644 --- a/Documentation/devicetree/bindings/leds/register-bit-led.txt +++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt @@ -5,7 +5,7 @@ where single bits in a certain register can turn on/off a single LED. The register bit LEDs appear as children to the syscon device, with the proper compatible string. For the syscon bindings see: -Documentation/devicetree/bindings/mfd/syscon.txt +Documentation/devicetree/bindings/mfd/syscon.yaml Each LED is represented as a sub-node of the syscon device. Each node's name represents the name of the corresponding LED. diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index 9af873b43acd..8453ee340b9f 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -33,24 +33,40 @@ properties: maxItems: 1 clocks: - minItems: 2 - maxItems: 3 - items: - - description: The CSI interface clock - - description: The CSI ISP clock - - description: The CSI DRAM clock + oneOf: + - items: + - description: The CSI interface clock + - description: The CSI DRAM clock + + - items: + - description: The CSI interface clock + - description: The CSI ISP clock + - description: The CSI DRAM clock clock-names: - minItems: 2 - maxItems: 3 - items: - - const: bus - - const: isp - - const: ram + oneOf: + - items: + - const: bus + - const: ram + + - items: + - const: bus + - const: isp + - const: ram resets: maxItems: 1 + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnects: + maxItems: 1 + + # FIXME: This should be made required eventually once every SoC will + # have the MBUS declared. + interconnect-names: + const: dma-mem + # See ./video-interfaces.txt for details port: type: object diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml new file mode 100644 index 000000000000..75196d11da58 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-de2-rotate.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83T DE2 Rotate Device Tree Bindings + +maintainers: + - Jernej Skrabec <jernej.skrabec@siol.net> + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +description: |- + The Allwinner A83T and A64 have a rotation core used for + rotating and flipping images. + +properties: + compatible: + oneOf: + - const: allwinner,sun8i-a83t-de2-rotate + - items: + - const: allwinner,sun50i-a64-de2-rotate + - const: allwinner,sun8i-a83t-de2-rotate + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Rotate interface clock + - description: Rotate module clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-de2.h> + #include <dt-bindings/reset/sun8i-de2.h> + + rotate: rotate@1020000 { + compatible = "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x1020000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml index 2e40f700e84f..8707df613f6c 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml @@ -17,7 +17,11 @@ description: |- properties: compatible: - const: allwinner,sun8i-h3-deinterlace + oneOf: + - const: allwinner,sun8i-h3-deinterlace + - items: + - const: allwinner,sun50i-a64-deinterlace + - const: allwinner,sun8i-h3-deinterlace reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/aspeed-video.txt b/Documentation/devicetree/bindings/media/aspeed-video.txt index ce2894506e1f..d2ca32512272 100644 --- a/Documentation/devicetree/bindings/media/aspeed-video.txt +++ b/Documentation/devicetree/bindings/media/aspeed-video.txt @@ -1,11 +1,12 @@ * Device tree bindings for Aspeed Video Engine -The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can +The Video Engine (VE) embedded in the Aspeed AST2400/2500/2600 SOCs can capture and compress video data from digital or analog sources. Required properties: - compatible: "aspeed,ast2400-video-engine" or - "aspeed,ast2500-video-engine" + "aspeed,ast2500-video-engine" or + "aspeed,ast2600-video-engine" - reg: contains the offset and length of the VE memory region - clocks: clock specifiers for the syscon clocks associated with the VE (ordering must match the clock-names property) diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml new file mode 100644 index 000000000000..32d6b693274f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/imx219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor + +maintainers: + - Dave Stevenson <dave.stevenson@raspberrypi.com> + +description: |- + The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor + with an active array size of 3280H x 2464V. It is programmable through + I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet. + Image data is sent through MIPI CSI-2, which is configured as either 2 or + 4 data lanes. + +properties: + compatible: + const: sony,imx219 + + reg: + description: I2C device address + maxItems: 1 + + clocks: + maxItems: 1 + + VDIG-supply: + description: + Digital I/O voltage supply, 1.8 volts + + VANA-supply: + description: + Analog voltage supply, 2.8 volts + + VDDL-supply: + description: + Digital core voltage supply, 1.2 volts + + reset-gpios: + description: |- + Reference to the GPIO connected to the xclr pin, if any. + Must be released (set high) after all supplies are applied. + + # See ../video-interfaces.txt for more details + port: + type: object + properties: + endpoint: + type: object + properties: + data-lanes: + description: |- + The sensor supports either two-lane, or four-lane operation. + If this property is omitted four-lane operation is assumed. + For two-lane operation the property must be set to <1 2>. + items: + - const: 1 + - const: 2 + + clock-noncontinuous: + type: boolean + description: |- + MIPI CSI-2 clock is non-continuous if this property is present, + otherwise it's continuous. + + link-frequencies: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64-array + description: + Allowed data bus frequencies. + + required: + - link-frequencies + +required: + - compatible + - reg + - clocks + - VANA-supply + - VDIG-supply + - VDDL-supply + - port + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&imx219_clk>; + VANA-supply = <&imx219_vana>; /* 2.8v */ + VDIG-supply = <&imx219_vdig>; /* 1.8v */ + VDDL-supply = <&imx219_vddl>; /* 1.2v */ + + port { + imx219_0: endpoint { + remote-endpoint = <&csi1_ep>; + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt index 8c0fc1a26bf0..6c88ce858d08 100644 --- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt @@ -5,38 +5,150 @@ The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats. Required Properties: -- compatible: value must be "ti,tvp5150" -- reg: I2C slave address +==================== +- compatible: Value must be "ti,tvp5150". +- reg: I2C slave address. Optional Properties: -- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any. -- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any. +==================== +- pdn-gpios: Phandle for the GPIO connected to the PDN pin, if any. +- reset-gpios: Phandle for the GPIO connected to the RESETB pin, if any. -The device node must contain one 'port' child node for its digital output -video port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. +The device node must contain one 'port' child node per device physical input +and output port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes +are numbered as follows -Required Endpoint Properties for parallel synchronization: + Name Type Port + -------------------------------------- + AIP1A sink 0 + AIP1B sink 1 + Y-OUT src 2 -- hsync-active: active state of the HSYNC signal. Must be <1> (HIGH). -- vsync-active: active state of the VSYNC signal. Must be <1> (HIGH). -- field-even-active: field signal level during the even field data - transmission. Must be <0>. +The device node must contain at least one sink port and the src port. Each input +port must be linked to an endpoint defined in [1]. The port/connector layout is +as follows -If none of hsync-active, vsync-active and field-even-active is specified, -the endpoint is assumed to use embedded BT.656 synchronization. +tvp-5150 port@0 (AIP1A) + endpoint@0 -----------> Comp0-Con port + endpoint@1 ------+----> Svideo-Con port +tvp-5150 port@1 (AIP1B) | + endpoint@1 ------+ + endpoint@0 -----------> Comp1-Con port +tvp-5150 port@2 + endpoint (video bitstream output at YOUT[0-7] parallel bus) -Example: +Required Endpoint Properties for parallel synchronization on output port: +========================================================================= + +- hsync-active: Active state of the HSYNC signal. Must be <1> (HIGH). +- vsync-active: Active state of the VSYNC signal. Must be <1> (HIGH). +- field-even-active: Field signal level during the even field data + transmission. Must be <0>. + +Note: Do not specify any of these properties if you want to use the embedded + BT.656 synchronization. + +Optional Connector Properties: +============================== + +- sdtv-standards: Set the possible signals to which the hardware tries to lock + instead of using the autodetection mechnism. Please look at + [1] for more information. + +[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt. + +Example - three input sources: +#include <dt-bindings/display/sdtv-standards.h> + +comp_connector_0 { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_M>; /* limit to pal-m signals */ + + port { + composite0_to_tvp5150: endpoint { + remote-endpoint = <&tvp5150_to_composite0>; + }; + }; +}; + +comp_connector_1 { + compatible = "composite-video-connector"; + label = "Composite1"; + sdtv-standards = <SDTV_STD_NTSC_M>; /* limit to ntsc-m signals */ + + port { + composite1_to_tvp5150: endpoint { + remote-endpoint = <&tvp5150_to_composite1>; + }; + }; +}; + +svideo_connector { + compatible = "svideo-connector"; + label = "S-Video"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + svideo_luma_to_tvp5150: endpoint@0 { + reg = <0>; + remote-endpoint = <&tvp5150_to_svideo_luma>; + }; + + svideo_chroma_to_tvp5150: endpoint@1 { + reg = <1>; + remote-endpoint = <&tvp5150_to_svideo_chroma>; + }; + }; +}; &i2c2 { - ... tvp5150@5c { compatible = "ti,tvp5150"; reg = <0x5c>; pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tvp5150_to_composite0: endpoint@0 { + reg = <0>; + remote-endpoint = <&composite0_to_tvp5150>; + }; + + tvp5150_to_svideo_luma: endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_luma_to_tvp5150>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tvp5150_to_composite1: endpoint@0 { + reg = <0>; + remote-endpoint = <&composite1_to_tvp5150>; + }; + + tvp5150_to_svideo_chroma: endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_chroma_to_tvp5150>; + }; + }; + + port@2 { + reg = <2>; - port { tvp5150_1: endpoint { remote-endpoint = <&ccdc_ep>; }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml new file mode 100644 index 000000000000..a2d1cd77c1e2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ SoCs + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + Hantro G1/G2 video decode accelerators present on i.MX8MQ SoCs. + +properties: + compatible: + const: nxp,imx8mq-vpu + + reg: + maxItems: 3 + + reg-names: + items: + - const: g1 + - const: g2 + - const: ctrl + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: g1 + - const: g2 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: g1 + - const: g2 + - const: bus + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vpu: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu"; + reg = <0x38300000 0x10000>, + <0x38310000 0x10000>, + <0x38320000 0x10000>; + reg-names = "g1", "g2", "ctrl"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g1", "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>, + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; + clock-names = "g1", "g2", "bus"; + power-domains = <&pgc_vpu>; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml new file mode 100644 index 000000000000..f9606df02d70 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8916-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: core + - const: iface + - const: bus + + iommus: + maxItems: 1 + + memory-region: + maxItems: 1 + + video-decoder: + type: object + + properties: + compatible: + const: "venus-decoder" + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: "venus-encoder" + + required: + - compatible + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - clock-names + - iommus + - memory-region + - video-decoder + - video-encoder + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + + video-codec@1d00000 { + compatible = "qcom,msm8916-venus"; + reg = <0x01d00000 0xff000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, + <&gcc GCC_VENUS0_AHB_CLK>, + <&gcc GCC_VENUS0_AXI_CLK>; + clock-names = "core", "iface", "bus"; + power-domains = <&gcc VENUS_GDSC>; + iommus = <&apps_iommu 5>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml new file mode 100644 index 000000000000..fa0dc6c47f1d --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8996-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: core + - const: iface + - const: bus + - const: mbus + + iommus: + maxItems: 20 + + memory-region: + maxItems: 1 + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - clock-names + - iommus + - memory-region + - video-decoder + - video-encoder + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + + video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + power-domains = <&mmcc VENUS_GDSC>; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml new file mode 100644 index 000000000000..764affa4877e --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,sc7180-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 2 + + power-domain-names: + items: + - const: venus + - const: vcodec0 + + clocks: + maxItems: 5 + + clock-names: + items: + - const: core + - const: iface + - const: bus + - const: vcodec0_core + - const: vcodec0_bus + + iommus: + maxItems: 1 + + memory-region: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: video-mem + - const: cpu-cfg + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - power-domain-names + - clocks + - clock-names + - iommus + - memory-region + - video-decoder + - video-encoder + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sc7180.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sc7180-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>; + power-domain-names = "venus", "vcodec0"; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus"; + iommus = <&apps_smmu 0x0c00 0x60>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml new file mode 100644 index 000000000000..8552f4ab907e --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm845-venus-v2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 3 + + power-domain-names: + items: + - const: venus + - const: vcodec0 + - const: vcodec1 + + clocks: + maxItems: 7 + + clock-names: + items: + - const: core + - const: iface + - const: bus + - const: vcodec0_core + - const: vcodec0_bus + - const: vcodec1_core + - const: vcodec1_bus + + iommus: + maxItems: 2 + + memory-region: + maxItems: 1 + + video-core0: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-core1: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - power-domain-names + - clocks + - clock-names + - iommus + - memory-region + - video-core0 + - video-core1 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sdm845.h> + + video-codec@aa00000 { + compatible = "qcom,sdm845-venus-v2"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus", + "vcodec1_core", "vcodec1_bus"; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&videocc VCODEC1_GDSC>; + power-domain-names = "venus", "vcodec0", "vcodec1"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + }; + + video-core1 { + compatible = "venus-encoder"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml new file mode 100644 index 000000000000..05cabe4e893a --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm845-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: core + - const: iface + - const: bus + + iommus: + maxItems: 2 + + memory-region: + maxItems: 1 + + video-core0: + type: object + + properties: + compatible: + const: venus-decoder + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: bus + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-core1: + type: object + + properties: + compatible: + const: venus-encoder + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: bus + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - clock-names + - iommus + - memory-region + - video-core0 + - video-core1 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sdm845.h> + + video-codec@aa00000 { + compatible = "qcom,sdm845-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; + clock-names = "core", "iface", "bus"; + power-domains = <&videocc VENUS_GDSC>; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC0_GDSC>; + }; + + video-core1 { + compatible = "venus-encoder"; + clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC1_GDSC>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt deleted file mode 100644 index b602c4c025e7..000000000000 --- a/Documentation/devicetree/bindings/media/qcom,venus.txt +++ /dev/null @@ -1,120 +0,0 @@ -* Qualcomm Venus video encoder/decoder accelerators - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Value should contain one of: - - "qcom,msm8916-venus" - - "qcom,msm8996-venus" - - "qcom,sdm845-venus" -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register base address and length of the register map. -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain interrupt line number. -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: A List of phandle and clock specifier pairs as listed - in clock-names property. -- clock-names: - Usage: required for msm8916 - Value type: <stringlist> - Definition: Should contain the following entries: - - "core" Core video accelerator clock - - "iface" Video accelerator AHB clock - - "bus" Video accelerator AXI clock -- clock-names: - Usage: required for msm8996 - Value type: <stringlist> - Definition: Should contain the following entries: - - "core" Core video accelerator clock - - "iface" Video accelerator AHB clock - - "bus" Video accelerator AXI clock - - "mbus" Video MAXI clock -- power-domains: - Usage: required - Value type: <prop-encoded-array> - Definition: A phandle and power domain specifier pairs to the - power domain which is responsible for collapsing - and restoring power to the peripheral. -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. -- memory-region: - Usage: required - Value type: <phandle> - Definition: reference to the reserved-memory for the firmware - memory region. - -* Subnodes -The Venus video-codec node must contain two subnodes representing -video-decoder and video-encoder, and one optional firmware subnode. -Firmware subnode is needed when the platform does not have TrustZone. - -Every of video-encoder or video-decoder subnode should have: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Value should contain "venus-decoder" or "venus-encoder" -- clocks: - Usage: required for msm8996 - Value type: <prop-encoded-array> - Definition: A List of phandle and clock specifier pairs as listed - in clock-names property. -- clock-names: - Usage: required for msm8996 - Value type: <stringlist> - Definition: Should contain the following entries: - - "core" Subcore video accelerator clock - -- power-domains: - Usage: required for msm8996 - Value type: <prop-encoded-array> - Definition: A phandle and power domain specifier pairs to the - power domain which is responsible for collapsing - and restoring power to the subcore. - -The firmware subnode must have: - -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. - -* An Example - video-codec@1d00000 { - compatible = "qcom,msm8916-venus"; - reg = <0x01d00000 0xff000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, - <&gcc GCC_VENUS0_AHB_CLK>, - <&gcc GCC_VENUS0_AXI_CLK>; - clock-names = "core", "iface", "bus"; - power-domains = <&gcc VENUS_GDSC>; - iommus = <&apps_iommu 5>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - clocks = <&mmcc VIDEO_SUBCORE0_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE0_GDSC>; - }; - - video-encoder { - compatible = "venus-encoder"; - clocks = <&mmcc VIDEO_SUBCORE1_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE1_GDSC>; - }; - - video-firmware { - iommus = <&apps_iommu 0x10b2 0x0>; - }; - }; diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index a64ee038d235..b27c9385d490 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -143,6 +143,7 @@ properties: - rc-videomate-k100 - rc-videomate-s350 - rc-videomate-tv-pvr + - rc-videostrong-kii-pro - rc-wetek-hub - rc-wetek-play2 - rc-winfast diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt index fd5276abfad6..c53a8e5133f6 100644 --- a/Documentation/devicetree/bindings/media/rockchip-rga.txt +++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt @@ -6,8 +6,9 @@ BitBLT, alpha blending and image blur/sharpness. Required properties: - compatible: value should be one of the following - "rockchip,rk3288-rga"; - "rockchip,rk3399-rga"; + "rockchip,rk3228-rga", "rockchip,rk3288-rga": for Rockchip RK3228 + "rockchip,rk3288-rga": for Rockchip RK3288 + "rockchip,rk3399-rga": for Rockchip RK3399 - interrupts: RGA interrupt specifier. diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml index 1ea784179536..5e066629287d 100644 --- a/Documentation/devicetree/bindings/media/ti,cal.yaml +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -177,7 +177,7 @@ examples: }; }; - i2c5: i2c@4807c000 { + i2c { clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index dd1843489ad1..3e0a8a92d652 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -347,6 +347,7 @@ examples: interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + #reset-cells = <1>; }; external-memory-controller@7001b000 { @@ -363,20 +364,23 @@ examples: timing-0 { clock-frequency = <12750000>; - nvidia,emc-zcal-cnt-long = <0x00000042>; - nvidia,emc-auto-cal-interval = <0x001fffff>; - nvidia,emc-ctt-term-ctrl = <0x00000802>; - nvidia,emc-cfg = <0x73240000>; - nvidia,emc-cfg-2 = <0x000008c5>; - nvidia,emc-sel-dpd-ctrl = <0x00040128>; - nvidia,emc-bgbias-ctl0 = <0x00000008>; nvidia,emc-auto-cal-config = <0xa1430000>; nvidia,emc-auto-cal-config2 = <0x00000000>; nvidia,emc-auto-cal-config3 = <0x00000000>; - nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; nvidia,emc-mode-1 = <0x80100003>; nvidia,emc-mode-2 = <0x80200008>; nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < 0x00000000 /* EMC_RC */ diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 44d71469c914..63f674ffeb4f 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -32,7 +32,7 @@ Required only for "ti,emif-am3352" and "ti,emif-am4372": - sram : Phandles for generic sram driver nodes, first should be type 'protect-exec' for the driver to use to copy and run PM functions, second should be regular pool to be used for - data region for code. See Documentation/devicetree/bindings/sram/sram.txt + data region for code. See Documentation/devicetree/bindings/sram/sram.yaml for more details. Optional properties: diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml index 4a70f875a6eb..480385789394 100644 --- a/Documentation/devicetree/bindings/mfd/max77650.yaml +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -97,14 +97,14 @@ examples: regulators { compatible = "maxim,max77650-regulator"; - max77650_ldo: regulator@0 { + max77650_ldo: regulator-ldo { regulator-compatible = "ldo"; regulator-name = "max77650-ldo"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <2937500>; }; - max77650_sbb0: regulator@1 { + max77650_sbb0: regulator-sbb0 { regulator-compatible = "sbb0"; regulator-name = "max77650-sbb0"; regulator-min-microvolt = <800000>; diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 3c91ad430eea..b823b8625243 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8901-regulators" "qcom,rpm-pm8921-regulators" "qcom,rpm-pm8018-regulators" + "qcom,rpm-smb208-regulators" - vdd_l0_l1_lvs-supply: - vdd_l2_l11_l12-supply: @@ -171,6 +172,9 @@ pm8018: s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l14, lvs1 +smb208: + s1a, s1b, s2a, s2b + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below: diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index 4f62143afd24..a5ced46bbde9 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -26,8 +26,8 @@ Required properties: ldo6, ldo7, ldo8 - xxx-supply: Input voltage supply regulator. - These entries are require if regulators are enabled for a device. Missing of these - properties can cause the regulator registration fails. + These entries are required if regulators are enabled for a device. Missing these + properties can cause the regulator registration to fail. If some of input supply is powered through battery or always-on supply then also it is require to have these parameters with proper node handle of always on power supply. diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt index 56f244b5d8a4..56f244b5d8a4 100644 --- a/Documentation/devicetree/bindings/mfd/twl-familly.txt +++ b/Documentation/devicetree/bindings/mfd/twl-family.txt diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt index 088eff9ddb78..e0f901edc063 100644 --- a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt @@ -20,7 +20,7 @@ RAVE SP consists of the following sub-devices: Device Description ------ ----------- rave-sp-wdt : Watchdog -rave-sp-nvmem : Interface to onborad EEPROM +rave-sp-nvmem : Interface to onboard EEPROM rave-sp-backlight : Display backlight rave-sp-hwmon : Interface to onboard hardware sensors rave-sp-leds : Interface to onboard LEDs diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt index bb7e896cb644..9134e9bcca56 100644 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt @@ -26,7 +26,7 @@ For generic IOMMU bindings, see Documentation/devicetree/bindings/iommu/iommu.txt. For arm-smmu binding, see: -Documentation/devicetree/bindings/iommu/arm,smmu.txt. +Documentation/devicetree/bindings/iommu/arm,smmu.yaml. Required properties: diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 3c0df4016a12..8fded83c519a 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -370,6 +370,7 @@ examples: mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; + reg = <0x1c12000 0x200>; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vmmc3>; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 19f5508a7569..4a9145ef15d6 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -124,7 +124,7 @@ not every application needs SDIO irq, e.g. MMC cards. pinctrl-1 = <&mmc1_idle>; pinctrl-2 = <&mmc1_sleep>; ... - interrupts-extended = <&intc 64 &gpio2 28 GPIO_ACTIVE_LOW>; + interrupts-extended = <&intc 64 &gpio2 28 IRQ_TYPE_LEVEL_LOW>; }; mmc1_idle : pinmux_cirq_pin { diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt index f3893c4d3c6a..d2eada5044b2 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt @@ -27,7 +27,7 @@ Required properties of NAND chips: - reg: shall contain the native Chip Select ids from 0 to max supported by the cadence nand flash controller -See Documentation/devicetree/bindings/mtd/nand.txt for more details on +See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on generic bindings. Example: diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 48a7f916c5e4..88b57b0ca1f4 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -45,7 +45,7 @@ Optional properties: switch queue - resets: a single phandle and reset identifier pair. See - Documentation/devicetree/binding/reset/reset.txt for details. + Documentation/devicetree/bindings/reset/reset.txt for details. - reset-names: If the "reset" property is specified, this property should have the value "switch" to denote the switch reset line. diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index 250f8d8cdce4..c00fb0d22c7b 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -110,6 +110,13 @@ PROPERTIES Usage: required Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt +- fsl,erratum-a050385 + Usage: optional + Value type: boolean + Definition: A boolean property. Indicates the presence of the + erratum A050385 which indicates that DMA transactions that are + split can result in a FMan lock. + ============================================================================= FMan MURAM Node diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 5d08d2ffd4eb..50c3397a82bc 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -56,7 +56,6 @@ patternProperties: examples: - | davinci_mdio: mdio@5c030000 { - compatible = "ti,davinci_mdio"; reg = <0x5c030000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index b43c6c65294e..65980224d550 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -76,6 +76,8 @@ examples: qfprom: eeprom@700000 { #address-cells = <1>; #size-cells = <1>; + reg = <0x00700000 0x100000>; + wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* ... */ diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt index 4751029b9b74..64f07417ecfb 100644 --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt @@ -19,7 +19,8 @@ In 'cpu' nodes: In 'operating-points-v2' table: - compatible: Should be - - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996. + - 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974, + apq8064, ipq8064, msm8960 and ipq8074. Optional properties: -------------------- diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml index 020ef9e4c411..94ac23687b7e 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml @@ -86,7 +86,7 @@ examples: #include <dt-bindings/clock/sun4i-a10-ccu.h> #include <dt-bindings/reset/sun4i-a10-ccu.h> - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 57d8603076bd..9e32cb43fb21 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -14,6 +14,7 @@ properties: compatible: enum: - amlogic,meson-g12a-usb2-phy + - amlogic,meson-a1-usb2-phy reg: maxItems: 1 @@ -49,6 +50,19 @@ required: - reset-names - "#phy-cells" +if: + properties: + compatible: + enum: + - amlogic,meson-a1-usb-ctrl + +then: + properties: + power-domains: + maxItems: 1 + required: + - power-domains + examples: - | phy@36000 { diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt deleted file mode 100644 index 7f49fd54ebc1..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt +++ /dev/null @@ -1,30 +0,0 @@ -Cadence MHDP DisplayPort SD0801 PHY binding -=========================================== - -This binding describes the Cadence SD0801 PHY hardware included with -the Cadence MHDP DisplayPort controller. - -------------------------------------------------------------------------------- -Required properties (controller (parent) node): -- compatible : Should be "cdns,dp-phy" -- reg : Defines the following sets of registers in the parent - mhdp device: - - Offset of the DPTX PHY configuration registers - - Offset of the SD0801 PHY configuration registers -- #phy-cells : from the generic PHY bindings, must be 0. - -Optional properties: -- num_lanes : Number of DisplayPort lanes to use (1, 2 or 4) -- max_bit_rate : Maximum DisplayPort link bit rate to use, in Mbps (2160, - 2430, 2700, 3240, 4320, 5400 or 8100) -------------------------------------------------------------------------------- - -Example: - dp_phy: phy@f0fb030a00 { - compatible = "cdns,dp-phy"; - reg = <0xf0 0xfb030a00 0x0 0x00000040>, - <0xf0 0xfb500000 0x0 0x00100000>; - num_lanes = <4>; - max_bit_rate = <8100>; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml new file mode 100644 index 000000000000..c779a3c7d87a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence Torrent SD0801 PHY binding for DisplayPort + +description: + This binding describes the Cadence SD0801 PHY (also known as Torrent PHY) + hardware included with the Cadence MHDP DisplayPort controller. + +maintainers: + - Swapnil Jakhade <sjakhade@cadence.com> + - Yuti Amonkar <yamonkar@cadence.com> + +properties: + compatible: + enum: + - cdns,torrent-phy + - ti,j721e-serdes-10g + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + maxItems: 1 + description: + PHY reference clock. Must contain an entry in clock-names. + + clock-names: + const: refclk + + reg: + minItems: 1 + maxItems: 2 + items: + - description: Offset of the Torrent PHY configuration registers. + - description: Offset of the DPTX PHY configuration registers. + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: torrent_phy + - const: dptx_phy + + resets: + maxItems: 1 + description: + Torrent PHY reset. + See Documentation/devicetree/bindings/reset/reset.txt + +patternProperties: + '^phy@[0-7]+$': + type: object + description: + Each group of PHY lanes with a single master lane should be represented as a sub-node. + properties: + reg: + description: + The master lane number. This is the lowest numbered lane in the lane group. + + resets: + minItems: 1 + maxItems: 4 + description: + Contains list of resets, one per lane, to get all the link lanes out of reset. + + "#phy-cells": + const: 0 + + cdns,phy-type: + description: + Specifies the type of PHY for which the group of PHY lanes is used. + Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 2, 3, 4, 5, 6] + + cdns,num-lanes: + description: + Number of DisplayPort lanes. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 2, 4] + default: 4 + + cdns,max-bit-rate: + description: + Maximum DisplayPort link bit rate to use, in Mbps + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] + default: 8100 + + required: + - reg + - resets + - "#phy-cells" + - cdns,phy-type + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - reg + - reg-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + torrent_phy: torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>, + <0xf0 0xfb030a00 0x0 0x00000040>; + reg-names = "torrent_phy", "dptx_phy"; + resets = <&phyrst 0>; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + torrent_phy_dp: phy@0 { + reg = <0>; + resets = <&phyrst 1>, <&phyrst 2>, + <&phyrst 3>, <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <8100>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt index a5f7a4f0dbc1..dd75b676b71d 100644 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -13,10 +13,16 @@ Required properties (controller (parent) node): "mediatek,mt8173-u3phy"; make use of "mediatek,generic-tphy-v1" on mt2701 instead and "mediatek,generic-tphy-v2" on mt2712 instead. - - clocks : (deprecated, use port's clocks instead) a list of phandle + - clock-specifier pairs, one for each entry in clock-names - - clock-names : (deprecated, use port's one instead) must contain - "u3phya_ref": for reference clock of usb3.0 analog phy. + +- #address-cells: the number of cells used to represent physical + base addresses. +- #size-cells: the number of cells used to represent the size of an address. +- ranges: the address mapping relationship to the parent, defined with + - empty value: if optional 'reg' is used. + - non-empty value: if optional 'reg' is not used. should set + the child's base address to 0, the physical address + within parent's address space, and the length of + the address map. Required nodes : a sub-node is required for each port the controller provides. Address range information including the usual @@ -34,12 +40,6 @@ Optional properties (controller (parent) node): Required properties (port (child) node): - reg : address and length of the register set for the port. -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : must contain - "ref": 48M reference clock for HighSpeed analog phy; and 26M - reference clock for SuperSpeed analog phy, sometimes is - 24M, 25M or 27M, depended on platform. - #phy-cells : should be 1 (See second example) cell after port phandle is phy type from: - PHY_TYPE_USB2 @@ -48,10 +48,22 @@ Required properties (port (child) node): - PHY_TYPE_SATA Optional properties (PHY_TYPE_USB2 port (child) node): +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : may contain + "ref": 48M reference clock for HighSpeed (digital) phy; and 26M + reference clock for SuperSpeed (digital) phy, sometimes is + 24M, 25M or 27M, depended on platform. + "da_ref": the reference clock of analog phy, used if the clocks + of analog and digital phys are separated, otherwise uses + "ref" clock only if needed. + - mediatek,eye-src : u32, the value of slew rate calibrate - mediatek,eye-vrt : u32, the selection of VRT reference voltage - mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage - mediatek,bc12 : bool, enable BC12 of u2phy if support it +- mediatek,discth : u32, the selection of disconnect threshold +- mediatek,intr : u32, the selection of internal R (resistance) Example: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml new file mode 100644 index 000000000000..144ae29e7141 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QUSB2 phy controller + +maintainers: + - Manu Gautam <mgautam@codeaurora.org> + +description: + QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,msm8996-qusb2-phy + - qcom,msm8998-qusb2-phy + - items: + - enum: + - qcom,sc7180-qusb2-phy + - qcom,sdm845-qusb2-phy + - const: qcom,qusb2-v2-phy + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + items: + - description: phy config clock + - description: 19.2 MHz ref clk + - description: phy interface clock (Optional) + + clock-names: + minItems: 2 + maxItems: 3 + items: + - const: cfg_ahb + - const: ref + - const: iface + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vdda-phy-dpdm-supply: + description: + Phandle to 3.1V regulator supply to Dp/Dm port signals. + + resets: + maxItems: 1 + description: + Phandle to reset to phy block. + + nvmem-cells: + maxItems: 1 + description: + Phandle to nvmem cell that contains 'HS Tx trim' + tuning parameter value for qusb2 phy. + + qcom,tcsr-syscon: + description: + Phandle to TCSR syscon register region. + $ref: /schemas/types.yaml#/definitions/phandle + +if: + properties: + compatible: + contains: + const: qcom,qusb2-v2-phy +then: + properties: + qcom,imp-res-offset-value: + description: + It is a 6 bit value that specifies offset to be + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY + tuning parameter that may vary for different boards of same SOC. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 63 + default: 0 + + qcom,bias-ctrl-value: + description: + It is a 6 bit value that specifies bias-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 63 + default: 0 + + qcom,charge-ctrl-value: + description: + It is a 2 bit value that specifies charge-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + default: 0 + + qcom,hstx-trim-value: + description: + It is a 4 bit value that specifies tuning for HSTX + output current. + Possible range is - 15mA to 24mA (stepsize of 600 uA). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 15 + default: 3 + + qcom,preemphasis-level: + description: + It is a 2 bit value that specifies pre-emphasis level. + Possible range is 0 to 15% (stepsize of 5%). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + default: 2 + + qcom,preemphasis-width: + description: + It is a 1 bit value that specifies how long the HSTX + pre-emphasis (specified using qcom,preemphasis-level) must be in + effect. Duration could be half-bit of full-bit. + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 1 + default: 0 + + qcom,hsdisc-trim-value: + description: + It is a 2 bit value tuning parameter that control disconnect + threshold and may vary for different boards of same SOC. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + default: 0 + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdda-pll-supply + - vdda-phy-dpdm-supply + - resets + + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + hsusb_phy: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x7411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml new file mode 100644 index 000000000000..ca6a0836b53c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY + +properties: + compatible: + enum: + - qcom,usb-hs-28nm-femtophy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmcc ref clock + - description: PHY AHB clock + - description: Rentention clock + + clock-names: + items: + - const: ref + - const: ahb + - const: sleep + + resets: + items: + - description: PHY core reset + - description: POR reset + + reset-names: + items: + - const: phy + - const: por + + vdd-supply: + description: phandle to the regulator VDD supply node. + + vdda1p8-supply: + description: phandle to the regulator 1.8V supply node. + + vdda3p3-supply: + description: phandle to the regulator 3.3V supply node. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vdd-supply + - vdda1p8-supply + - vdda3p3-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + usb2_phy_prim: phy@7a000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0007a000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "ahb", "sleep"; + resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, + <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy", "por"; + vdd-supply = <&vreg_l4_1p2>; + vdda1p8-supply = <&vreg_l5_1p8>; + vdda3p3-supply = <&vreg_l12_3p3>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml new file mode 100644 index 000000000000..bd1388d62ce0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY + +properties: + compatible: + enum: + - qcom,usb-ss-28nm-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmcc clock + - description: PHY AHB clock + - description: SuperSpeed pipe clock + + clock-names: + items: + - const: ref + - const: ahb + - const: pipe + + vdd-supply: + description: phandle to the regulator VDD supply node. + + vdda1p8-supply: + description: phandle to the regulator 1.8V supply node. + + resets: + items: + - description: COM reset + - description: PHY reset line + + reset-names: + items: + - const: com + - const: phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdd-supply + - vdda1p8-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + usb3_phy: usb3-phy@78000 { + compatible = "qcom,usb-ss-28nm-phy"; + reg = <0x78000 0x400>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "ref", "ahb", "pipe"; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "com", "phy"; + vdd-supply = <&vreg_l3_1p05>; + vdda1p8-supply = <&vreg_l5_1p8>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt deleted file mode 100644 index a1697c27aecd..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt +++ /dev/null @@ -1,37 +0,0 @@ -Qualcomm DWC3 HS AND SS PHY CONTROLLER --------------------------------------- - -DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer -controllers. Each DWC3 PHY controller should have its own node. - -Required properties: -- compatible: should contain one of the following: - - "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller - - "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller -- reg: offset and length of the DWC3 PHY controller register set -- #phy-cells: must be zero -- clocks: a list of phandles and clock-specifier pairs, one for each entry in - clock-names. -- clock-names: Should contain "ref" for the PHY reference clock - -Optional clocks: - "xo" External reference clock - -Example: - phy@100f8800 { - compatible = "qcom,dwc3-hs-usb-phy"; - reg = <0x100f8800 0x30>; - clocks = <&gcc USB30_0_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - }; - - phy@100f8830 { - compatible = "qcom,dwc3-ss-usb-phy"; - reg = <0x100f8830 0x30>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - - }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index eac9ad3cbbc8..54d6f8d43508 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -8,10 +8,13 @@ Required properties: - compatible: compatible list, contains: "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, + "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996, "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998, "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998, "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998, + "qcom,sdm845-qhp-pcie-phy" for QHP PCIe phy on sdm845, + "qcom,sdm845-qmp-pcie-phy" for QMP PCIe phy on sdm845, "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845, "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845, @@ -44,6 +47,8 @@ Required properties: For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,msm8996-qmp-ufs-phy" must contain: + "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8998-qmp-usb3-phy" must contain: @@ -52,6 +57,10 @@ Required properties: "ref", "ref_aux". For "qcom,msm8998-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,sdm845-qhp-pcie-phy" must contain: + "aux", "cfg_ahb", "ref", "refgen". + For "qcom,sdm845-qmp-pcie-phy" must contain: + "aux", "cfg_ahb", "ref", "refgen". For "qcom,sdm845-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: @@ -72,6 +81,8 @@ Required properties: "phy", "common". For "qcom,msm8996-qmp-pcie-phy" must contain: "phy", "common", "cfg". + For "qcom,msm8996-qmp-ufs-phy": must contain: + "ufsphy". For "qcom,msm8996-qmp-usb3-phy" must contain "phy", "common". For "qcom,msm8998-qmp-usb3-phy" must contain @@ -80,6 +91,10 @@ Required properties: "ufsphy". For "qcom,msm8998-qmp-pcie-phy" must contain: "phy", "common". + For "qcom,sdm845-qhp-pcie-phy" must contain: + "phy". + For "qcom,sdm845-qmp-pcie-phy" must contain: + "phy". For "qcom,sdm845-qmp-usb3-phy" must contain: "phy", "common". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt deleted file mode 100644 index fe29f9e0af6d..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt +++ /dev/null @@ -1,68 +0,0 @@ -Qualcomm QUSB2 phy controller -============================= - -QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. - -Required properties: - - compatible: compatible list, contains - "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, - "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998, - "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. - - - reg: offset and length of the PHY register set. - - #phy-cells: must be 0. - - - clocks: a list of phandles and clock-specifier pairs, - one for each entry in clock-names. - - clock-names: must be "cfg_ahb" for phy config clock, - "ref" for 19.2 MHz ref clk, - "iface" for phy interface clock (Optional). - - - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. - - vdda-phy-dpdm-supply: Phandle to 3.1V regulator supply to Dp/Dm port signals. - - - resets: Phandle to reset to phy block. - -Optional properties: - - nvmem-cells: Phandle to nvmem cell that contains 'HS Tx trim' - tuning parameter value for qusb2 phy. - - - qcom,tcsr-syscon: Phandle to TCSR syscon register region. - - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be - added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY - tuning parameter that may vary for different boards of same SOC. - This property is applicable to only QUSB2 v2 PHY (sdm845). - - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX - output current. - Possible range is - 15mA to 24mA (stepsize of 600 uA). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - This property is applicable to only QUSB2 v2 PHY (sdm845). - Default value is 22.2mA for sdm845. - - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level. - Possible range is 0 to 15% (stepsize of 5%). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - This property is applicable to only QUSB2 v2 PHY (sdm845). - Default value is 10% for sdm845. -- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX - pre-emphasis (specified using qcom,preemphasis-level) must be in - effect. Duration could be half-bit of full-bit. - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - This property is applicable to only QUSB2 v2 PHY (sdm845). - Default value is full-bit width for sdm845. - -Example: - hsusb_phy: phy@7411000 { - compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7411000 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX1_USB2_CLKREF_CLK>, - clock-names = "cfg_ahb", "ref"; - - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - nvmem-cells = <&qusb2p_hstx_trim>; - }; diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt index 50ce9ae0f7a5..83b78c1c0644 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt @@ -40,6 +40,7 @@ Required properties: "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform "ti,am43xx-phy-gmii-sel" for am43xx platform "ti,dm814-phy-gmii-sel" for dm814x platform + "ti,am654-phy-gmii-sel" for AM654x/J721E platform - reg : Address and length of the register set for the device - #phy-cells : must be 2. cell 1 - CPSW port number (starting from 1) diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt index 1889d3b89d68..3cee372c5742 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt @@ -5,14 +5,19 @@ PCIe controller implemented on Socionext UniPhier SoCs. Required properties: - compatible: Should contain one of the following: + "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY - reg: Specifies offset and length of the register set for the device. - #phy-cells: Must be zero. -- clocks: A phandle to the clock gate for PCIe glue layer including - this phy. -- resets: A phandle to the reset line for PCIe glue layer including - this phy. +- clocks: A list of phandles to the clock gate for PCIe glue layer + including this phy. +- clock-names: For Pro5 only, should contain the following: + "gio", "link" - for Pro5 SoC +- resets: A list of phandles to the reset line for PCIe glue layer + including this phy. +- reset-names: For Pro5 only, should contain the following: + "gio", "link" - for Pro5 SoC Optional properties: - socionext,syscon: A phandle to system control to set configurations diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt index e8d8086a7ae9..093d4f08705f 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt @@ -7,7 +7,7 @@ this describes about High-Speed PHY. Required properties: - compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb3-hsphy" - for Pro4 SoC + "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC @@ -16,13 +16,13 @@ Required properties: - clocks: A list of phandles to the clock gate for USB3 glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain the following: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro5 SoC "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. "phy", "link" - for others - resets: A list of phandles to the reset control for USB3 glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain the following: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro5 SoC "phy", "link" - for others Optional properties: diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt index 490b815445e8..9df2bc2f5999 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt @@ -8,6 +8,7 @@ this describes about Super-Speed PHY. Required properties: - compatible: Should contain one of the following: "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC + "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC @@ -16,13 +17,13 @@ Required properties: - clocks: A list of phandles to the clock gate for USB3 glue layer. According to the clock-names, appropriate clocks are required. - clock-names: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoC "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. "phy", "link" - for others - resets: A list of phandles to the reset control for USB3 glue layer. According to the reset-names, appropriate resets are required. - reset-names: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoC "phy", "link" - for others Optional properties: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index bb690e20c368..135c7dfbc180 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -17,7 +17,7 @@ description: |+ "aspeed,ast2400-scu", "syscon", "simple-mfd" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index f7f5d57f2c9a..824f7fd1d51b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -18,7 +18,7 @@ description: |+ "aspeed,g5-scu", "syscon", "simple-mfd" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 3749fa233e87..ac8d1c30a8ed 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -17,7 +17,7 @@ description: |+ "aspeed,ast2600-scu", "syscon", "simple-mfd" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 754ea7ab040a..ef4de32cb17c 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -248,7 +248,7 @@ examples: }; //Example 3 pin groups - pinctrl@60020000 { + pinctrl { usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('A', 9, AF7)>; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index aab70e8b681e..d3098c924b25 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -18,7 +18,7 @@ description: |+ "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.txt b/Documentation/devicetree/bindings/power/domain-idle-state.txt deleted file mode 100644 index eefc7ed22ca2..000000000000 --- a/Documentation/devicetree/bindings/power/domain-idle-state.txt +++ /dev/null @@ -1,33 +0,0 @@ -PM Domain Idle State Node: - -A domain idle state node represents the state parameters that will be used to -select the state when there are no active components in the domain. - -The state node has the following parameters - - -- compatible: - Usage: Required - Value type: <string> - Definition: Must be "domain-idle-state". - -- entry-latency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing worst case latency in - microseconds required to enter the idle state. - The exit-latency-us duration may be guaranteed - only after entry-latency-us has passed. - -- exit-latency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing worst case latency - in microseconds required to exit the idle state. - -- min-residency-us - Usage: Required - Value type: <prop-encoded-array> - Definition: u32 value representing minimum residency duration - in microseconds after which the idle state will yield - power benefits after overcoming the overhead in entering -i the idle state. diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml new file mode 100644 index 000000000000..dfba1af9abe5 --- /dev/null +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/domain-idle-state.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PM Domain Idle States binding description + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: + A domain idle state node represents the state parameters that will be used to + select the state when there are no active components in the PM domain. + +properties: + $nodename: + const: domain-idle-states + +patternProperties: + "^(cpu|cluster|domain)-": + type: object + description: + Each state node represents a domain idle state description. + + properties: + compatible: + const: domain-idle-state + + entry-latency-us: + description: + The worst case latency in microseconds required to enter the idle + state. Note that, the exit-latency-us duration may be guaranteed only + after the entry-latency-us has passed. + + exit-latency-us: + description: + The worst case latency in microseconds required to exit the idle + state. + + min-residency-us: + description: + The minimum residency duration in microseconds after which the idle + state will yield power benefits, after overcoming the overhead while + entering the idle state. + + required: + - compatible + - entry-latency-us + - exit-latency-us + - min-residency-us + +examples: + - | + + domain-idle-states { + domain_retention: domain-retention { + compatible = "domain-idle-state"; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <80>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index 455b573293ae..6047aacd7766 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -25,22 +25,20 @@ description: |+ properties: $nodename: - pattern: "^(power-controller|power-domain)(@.*)?$" + pattern: "^(power-controller|power-domain)([@-].*)?$" domain-idle-states: $ref: /schemas/types.yaml#/definitions/phandle-array - description: - A phandle of an idle-state that shall be soaked into a generic domain - power state. The idle state definitions are compatible with - domain-idle-state specified in - Documentation/devicetree/bindings/power/domain-idle-state.txt - phandles that are not compatible with domain-idle-state will be ignored. - The domain-idle-state property reflects the idle state of this PM domain - and not the idle states of the devices or sub-domains in the PM domain. - Devices and sub-domains have their own idle-states independent - of the parent domain's idle states. In the absence of this property, - the domain would be considered as capable of being powered-on - or powered-off. + description: | + Phandles of idle states that defines the available states for the + power-domain provider. The idle state definitions are compatible with the + domain-idle-state bindings, specified in ./domain-idle-state.yaml. + + Note that, the domain-idle-state property reflects the idle states of this + PM domain and not the idle states of the devices or sub-domains in the PM + domain. Devices and sub-domains have their own idle states independent of + the parent domain's idle states. In the absence of this property, the + domain would be considered as capable of being powered-on or powered-off. operating-points-v2: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 5b09b2deb483..08497ef26c7a 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -109,4 +109,4 @@ Example: required-opps = <&domain1_opp_1>; }; -[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt +[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt new file mode 100644 index 000000000000..551867829459 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mp886x.txt @@ -0,0 +1,27 @@ +Monolithic Power Systems MP8867/MP8869 voltage regulator + +Required properties: +- compatible: Must be one of the following. + "mps,mp8867" + "mps,mp8869" +- reg: I2C slave address. +- enable-gpios: enable gpios. +- mps,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in kilo ohms. + +Any property defined as part of the core regulator binding, defined in +./regulator.txt, can also be used. + +Example: + + vcpu: regulator@62 { + compatible = "mps,mp8869"; + regulator-name = "vcpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <850000>; + regulator-always-on; + regulator-boot-on; + enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; + mps,fb-voltage-divider = <80 240>; + reg = <0x62>; + }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml new file mode 100644 index 000000000000..f0acce2029fd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MP5416 PMIC + +maintainers: + - Saravanan Sekar <sravanhome@gmail.com> + +properties: + $nodename: + pattern: "^pmic@[0-9a-f]{1,2}$" + compatible: + enum: + - mps,mp5416 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-4] and LDO[1-4] + + patternProperties: + "^buck[1-4]$": + allOf: + - $ref: "regulator.yaml#" + type: object + + "^ldo[1-4]$": + allOf: + - $ref: "regulator.yaml#" + type: object + + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "mps,mp5416"; + reg = <0x69>; + + regulators { + + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3975000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index d126df043403..dea4384f4c03 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -26,6 +26,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8994-regulators" "qcom,rpm-pm8998-regulators" "qcom,rpm-pma8084-regulators" + "qcom,rpm-pmi8994-regulators" "qcom,rpm-pmi8998-regulators" "qcom,rpm-pms405-regulators" @@ -146,6 +147,15 @@ Regulator nodes are identified by their compatible: - vdd_s1-supply: - vdd_s2-supply: - vdd_s3-supply: +- vdd_bst_byp-supply: + Usage: optional (pmi8994 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: - vdd_s4-supply: - vdd_s5-supply: - vdd_s6-supply: @@ -259,6 +269,9 @@ pma8084: l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 +pmi8994: + s1, s2, s3, boost-bypass + pmi8998: bob diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index f5cdac8b2847..8b005192f6e8 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -161,7 +161,7 @@ The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each of the PMICs below. -pm8005: +pm8004: s2, s5 pm8005: diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 92ff2e8ad572..91a39a33000b 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -191,7 +191,7 @@ patternProperties: examples: - | - xyzreg: regulator@0 { + xyzreg: regulator { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <2500000>; regulator-always-on; diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml new file mode 100644 index 000000000000..d1a79d2ffa1e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/vqmmc-ipq4019-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ4019 VQMMC SD LDO regulator + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +description: | + Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller, + in order to support both 1.8 and 3V I/O voltage levels an LDO + controller is also embedded. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: qcom,vqmmc-ipq4019-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + regulator@1948000 { + compatible = "qcom,vqmmc-ipq4019-regulator"; + reg = <0x01948000 0x4>; + regulator-name = "vqmmc"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + status = "disabled"; + }; +... diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml index 246dea8a2ec9..8ac437282659 100644 --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -23,7 +23,11 @@ properties: description: Global reset register offset and bit offset. allOf: - $ref: /schemas/types.yaml#/definitions/uint32-array - - maxItems: 2 + items: + - description: Register offset + - description: Register bit offset + minimum: 0 + maximum: 31 "#reset-cells": minimum: 2 diff --git a/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt index b4edaf7c7ff3..2880d5dda95e 100644 --- a/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt +++ b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt @@ -3,4 +3,4 @@ STMicroelectronics STM32MP1 Peripheral Reset Controller The RCC IP is both a reset and a clock controller. -Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt +Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index 944743dd9212..c42b91e525fa 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -36,7 +36,7 @@ SAI subnodes required properties: - clock-names: Must contain "sai_ck". Must also contain "MCLK", if SAI shares a master clock, with a SAI set as MCLK clock provider. - - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt + - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml - dma-names: identifier string for each DMA request line "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt index 33826f2459fa..ca9101777c44 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt @@ -10,7 +10,7 @@ Required properties: - clock-names: must contain "kclk" - interrupts: cpu DAI interrupt line - dmas: DMA specifiers for audio data DMA and iec control flow DMA - See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt + See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml - dma-names: two dmas have to be defined, "rx" and "rx-ctrl" Optional properties: diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 49b617c98ae7..9147df29022a 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -22,6 +22,7 @@ properties: enum: - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs + - amlogic,meson-g12a-spicc # SPICC controller on Amlogic G12A and compatible SoCs interrupts: maxItems: 1 @@ -40,6 +41,27 @@ properties: items: - const: core +if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-spicc + +then: + properties: + clocks: + contains: + items: + - description: controller register bus clock + - description: baud rate generator and delay control clock + + clock-names: + minItems: 2 + items: + - const: core + - const: pclk + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 2d3264140cc5..33bc58f4cf4b 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -10,7 +10,10 @@ Required properties: - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc - - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M + - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ + - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM + - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN + - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - clocks : Clock specifiers for both ipg and per clocks. diff --git a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml new file mode 100644 index 000000000000..2aa766759d59 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qca,ar934x-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR934x/QCA95xx SoC SPI controller + +maintainers: + - Chuanhong Guo <gch981213@gmail.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: qca,ar934x-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#address-cells' + - '#size-cells' + +examples: + - | + #include <dt-bindings/clock/ath79-clk.h> + spi: spi@1f000000 { + compatible = "qca,ar934x-spi"; + reg = <0x1f000000 0x1c>; + clocks = <&pll ATH79_CLK_AHB>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 1e0ca6ccf64b..d8e5509a7081 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -52,6 +52,12 @@ properties: description: The SPI controller acts as a slave, instead of a master. +oneOf: + - required: + - "#address-cells" + - required: + - spi-slave + patternProperties: "^slave$": type: object @@ -114,7 +120,7 @@ patternProperties: - enum: [ 1, 2, 4, 8 ] - default: 1 description: - Bus width to the SPI bus used for MISO. + Bus width to the SPI bus used for read transfers. spi-rx-delay-us: description: @@ -126,7 +132,7 @@ patternProperties: - enum: [ 1, 2, 4, 8 ] - default: 1 description: - Bus width to the SPI bus used for MOSI. + Bus width to the SPI bus used for write transfers. spi-tx-delay-us: description: diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 162e024b95a0..30a79da9c039 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -1,12 +1,17 @@ ARM Freescale DSPI controller Required properties: -- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", - "fsl,ls2085a-dspi" - or - "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" - "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - "fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi" +- compatible : must be one of: + "fsl,vf610-dspi", + "fsl,ls1021a-v1.0-dspi", + "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1028a-dspi", + "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"), + "fsl,ls2085a-dspi", + "fsl,lx2160a-dspi", - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. @@ -14,11 +19,11 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must contain a "default" entry. - spi-num-chipselects : the number of the chipselect signals. -- bus-num : the slave chip chipselect signal number. Optional property: - big-endian: If present the dspi device's registers are implemented in big endian mode. +- bus-num : the slave chip chipselect signal number. Optional SPI slave node properties: - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt index a12e3b5c495d..984ae7fd4f94 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MediaTek SoCs +* Serial NOR flash controller for MediaTek ARM SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -13,6 +13,7 @@ Required properties: "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register +- interrupts: Interrupt number used by the controller. - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks the clocks should be named "spi" and "sf". "spi" is used for spi bus, @@ -22,20 +23,16 @@ Required properties: - #address-cells: should be <1> - #size-cells: should be <0> -The SPI flash must be a child of the nor_flash node and must have a -compatible property. Also see jedec,spi-nor.txt. - -Required properties: -- compatible: May include a device-specific string consisting of the manufacturer - and name of the chip. Must also include "jedec,spi-nor" for any - SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). -- reg : Chip-Select number +There should be only one spi slave device following generic spi bindings. +It's not recommended to use this controller for devices other than SPI NOR +flash due to limited transfer capability of this controller. Example: nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; + interrupts = <&spi_flash_irq>; clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>; clock-names = "spi", "sf"; diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml new file mode 100644 index 000000000000..0ae692dc28b5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SPI Multiplexer + +description: | + This binding describes a SPI bus multiplexer to route the SPI chip select + signals. This can be used when you need more devices than the SPI controller + has chip selects available. An example setup is shown in ASCII art; the actual + setting of the multiplexer to a channel needs to be done by a specific SPI mux + driver. + + MOSI /--------------------------------+--------+--------+--------\ + MISO |/------------------------------+|-------+|-------+|-------\| + SCL ||/----------------------------+||------+||------+||------\|| + ||| ||| ||| ||| ||| + +------------+ ||| ||| ||| ||| + | SoC ||| | +-+++-+ +-+++-+ +-+++-+ +-+++-+ + | ||| | | dev | | dev | | dev | | dev | + | +--+++-+ | CS-X +------+\ +--+--+ +--+--+ +--+--+ +--+--+ + | | SPI +-|-------+ Mux |\\ CS-0 | | | | + | +------+ | +--+---+\\\-------/ CS-1 | | | + | | | \\\----------------/ CS-2 | | + | +------+ | | \\-------------------------/ CS-3 | + | | ? +-|----------/ \----------------------------------/ + | +------+ | + +------------+ + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + compatible: + const: spi-mux + + mux-controls: + maxItems: 1 + +required: + - compatible + - reg + - spi-max-frequency + - mux-controls + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + spi@0 { + compatible = "spi-mux"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <100000000>; + + mux-controls = <&mux>; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <40000000>; + }; + + spi-device@1 { + compatible = "lineartechnology,ltc2488"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <10000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt index 2cd67eb727d4..7ac60d9fe357 100644 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt @@ -2,6 +2,9 @@ Required properties: - compatible : Should be "nxp,lx2160a-fspi" + "nxp,imx8qxp-fspi" + "nxp,imx8mm-fspi" + - reg : First contains the register location and length, Second contains the memory mapping address and length - reg-names : Should contain the resource reg names: diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt deleted file mode 100644 index a0edac12d8df..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Rockchip SPI Controller - -The Rockchip SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required Properties: - -- compatible: should be one of the following. - "rockchip,rv1108-spi" for rv1108 SoCs. - "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs. - "rockchip,rk3036-spi" for rk3036 SoCS. - "rockchip,rk3066-spi" for rk3066 SoCs. - "rockchip,rk3188-spi" for rk3188 SoCs. - "rockchip,rk3228-spi" for rk3228 SoCS. - "rockchip,rk3288-spi" for rk3288 SoCs. - "rockchip,rk3368-spi" for rk3368 SoCs. - "rockchip,rk3399-spi" for rk3399 SoCs. -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for - the peripheral clock. -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Properties: - -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling - Rx data (may need to be fine tuned for high capacitance lines). - No delay (0) by default. -- pinctrl-names: Names for the pin configuration(s); may be "default" or - "sleep", where the "sleep" configuration may describe the state - the pins should be in during system suspend. See also - pinctrl/pinctrl-bindings.txt. - - -Example: - - spi0: spi@ff110000 { - compatible = "rockchip,rk3066-spi"; - reg = <0xff110000 0x1000>; - dmas = <&pdma1 11>, <&pdma1 12>; - dma-names = "tx", "rx"; - rx-sample-delay-ns = <10>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - pinctrl-0 = <&spi1_pins>; - pinctrl-1 = <&spi1_sleep>; - pinctrl-names = "default", "sleep"; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml new file mode 100644 index 000000000000..81ad4b761502 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SPI Controller + +description: + The Rockchip SPI controller is used to interface with various devices such + as flash and display controllers using the SPI communication interface. + +allOf: + - $ref: "spi-controller.yaml#" + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +# Everything else is described in the common file +properties: + compatible: + oneOf: + - const: rockchip,rk3036-spi + - const: rockchip,rk3066-spi + - const: rockchip,rk3228-spi + - const: rockchip,rv1108-spi + - items: + - enum: + - rockchip,px30-spi + - rockchip,rk3188-spi + - rockchip,rk3288-spi + - rockchip,rk3308-spi + - rockchip,rk3328-spi + - rockchip,rk3368-spi + - rockchip,rk3399-spi + - const: rockchip,rk3066-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: transfer-clock + - description: peripheral clock + + clock-names: + items: + - const: spiclk + - const: apb_pclk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + rx-sample-delay-ns: + default: 0 + description: + Nano seconds to delay after the SCLK edge before sampling Rx data + (may need to be fine tuned for high capacitance lines). + If not specified 0 will be used. + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + description: + Names for the pin configuration(s); may be "default" or "sleep", + where the "sleep" configuration may describe the state + the pins should be in during system suspend. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0: spi@ff110000 { + compatible = "rockchip,rk3066-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&pdma1 11>, <&pdma1 12>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi1_pins>; + pinctrl-1 = <&spi1_sleep>; + pinctrl-names = "default", "sleep"; + rx-sample-delay-ns = <10>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index f0d979664f07..e49ecbf715ba 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -49,7 +49,7 @@ properties: dmas: description: | DMA specifiers for tx and rx dma. DMA fifo mode must be used. See - the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt. + the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml. items: - description: rx DMA channel - description: tx DMA channel diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index 80bac7a182d5..4b5509436588 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -125,7 +125,7 @@ examples: #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml index d9fdf4809a49..f3e68ed03abf 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml @@ -17,7 +17,7 @@ description: |+ "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd" Refer to the the bindings described in - Documentation/devicetree/bindings/mfd/syscon.txt + Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml index 23e989e09766..d918cee100ac 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -87,7 +87,7 @@ additionalProperties: false examples: - | - timer { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x400>; interrupts = <22>, diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 978de7d37c66..330cab25cc92 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -34,14 +34,6 @@ properties: - adi,adt7461 # +/-1C TDM Extended Temp Range I.C - adt7461 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7473 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7475 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7476 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7490 # Three-Axis Digital Accelerometer - adi,adxl345 # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) @@ -350,6 +342,8 @@ properties: - ti,ads7830 # Temperature Monitoring and Fan Control - ti,amc6821 + # Temperature sensor with 2-wire interface + - ti,lm73 # Temperature sensor with integrated fan control - ti,lm96000 # I2C Touch-Screen Controller diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index 267fce165994..b0e5e0fe9386 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -22,10 +22,14 @@ description: | The DWC3 Glue controls the PHY routing and power, an interrupt line is connected to the Glue to serve as OTG ID change detection. + The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in + host-only mode. + properties: compatible: enum: - amlogic,meson-g12a-usb-ctrl + - amlogic,meson-a1-usb-ctrl ranges: true @@ -84,6 +88,25 @@ required: - phys - dr_mode +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-a1-usb-ctrl + + then: + properties: + clocks: + minItems: 3 + clock-names: + items: + - const: usb_ctrl + - const: usb_bus + - const: xtal_usb_ctrl + required: + - clock-names + examples: - | usb: usb@ffe09000 { diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml new file mode 100644 index 000000000000..06399ba0d9e4 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 Facebook Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED USB 2.0 Virtual Hub Controller + +maintainers: + - Benjamin Herrenschmidt <benh@kernel.crashing.org> + +description: |+ + The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub + register and several sets of Device and Endpoint registers to support + the Virtual Hub's downstream USB devices. + + Supported number of devices and endpoints vary depending on hardware + revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices + and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream + devices and 21 generic endpoints. + +properties: + compatible: + enum: + - aspeed,ast2400-usb-vhub + - aspeed,ast2500-usb-vhub + - aspeed,ast2600-usb-vhub + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + aspeed,vhub-downstream-ports: + description: Number of downstream ports supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 5 + minimum: 1 + maximum: 7 + + aspeed,vhub-generic-endpoints: + description: Number of generic endpoints supported by the Virtual Hub + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 15 + minimum: 1 + maximum: 21 + +required: + - compatible + - reg + - clocks + - interrupts + - aspeed,vhub-downstream-ports + - aspeed,vhub-generic-endpoints + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 71cf7ba32237..6baf00e7d0a9 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -18,27 +18,15 @@ properties: - const: rockchip,rk3066-usb - const: snps,dwc2 - items: - - const: rockchip,px30-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3036-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rv1108-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3188-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3228-usb - - const: rockchip,rk3066-usb - - const: snps,dwc2 - - items: - - const: rockchip,rk3288-usb + - enum: + - rockchip,px30-usb + - rockchip,rk3036-usb + - rockchip,rk3188-usb + - rockchip,rk3228-usb + - rockchip,rk3288-usb + - rockchip,rk3328-usb + - rockchip,rk3368-usb + - rockchip,rv1108-usb - const: rockchip,rk3066-usb - const: snps,dwc2 - const: lantiq,arx100-usb diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 66780a47ad85..9946ff9ba735 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -7,7 +7,8 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. - - clock-names: should contain "ref", "bus_early", "suspend" + - clock-names: list of clock names. Ideally should be "ref", + "bus_early", "suspend" but may be less or more. - clocks: list of phandle and clock specifier pairs corresponding to entries in the clock-names property. @@ -36,7 +37,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". - - resets: a single pair of phandle and reset specifier + - resets: set of phandle and reset specifier pairs - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command @@ -75,6 +76,8 @@ Optional properties: from P0 to P1/P2/P3 without delay. - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check during HS transmit. + - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in + park mode are disabled. - snps,dis_metastability_quirk: when set, disable metastability workaround. CAUTION: use only if you are absolutely sure of it. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index e6790d2a4da9..67c51759a642 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -35,6 +35,12 @@ Optional properties: the USB data role (USB host or USB device) for a given USB connector, such as Type-C, Type-B(micro). see connector/usb-connector.txt. + - role-switch-default-mode: indicating if usb-role-switch is enabled, the + device default operation mode of controller while usb + role is USB_ROLE_NONE. Valid arguments are "host" and + "peripheral". Defaults to "peripheral" if not + specified. + This is an attribute to a USB controller such as: diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt deleted file mode 100644 index 16808721f3ff..000000000000 --- a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt +++ /dev/null @@ -1,32 +0,0 @@ -Ingenic JZ4740 MUSB driver - -Required properties: - -- compatible: Must be "ingenic,jz4740-musb" -- reg: Address range of the UDC register set -- interrupts: IRQ number related to the UDC hardware -- interrupt-names: must be "mc" -- clocks: phandle to the "udc" clock -- clock-names: must be "udc" -- phys: phandle to the USB PHY - -Example: - -usb_phy: usb-phy@0 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; -}; - -udc: usb@13040000 { - compatible = "ingenic,jz4740-musb"; - reg = <0x13040000 0x10000>; - - interrupt-parent = <&intc>; - interrupts = <24>; - interrupt-names = "mc"; - - clocks = <&cgu JZ4740_CLK_UDC>; - clock-names = "udc"; - - phys = <&usb_phy>; -}; diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml new file mode 100644 index 000000000000..a81b0b1a2226 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ingenic,jz4770-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ4770 USB PHY devicetree bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: '^usb-phy@.*' + + compatible: + enum: + - ingenic,jz4770-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + vcc-supply: + description: VCC power supply + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - vcc-supply + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4770-cgu.h> + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + vcc-supply = <&vcc>; + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml new file mode 100644 index 000000000000..1d6877875077 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ingenic,musb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ47xx USB IP DT bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: '^usb@.*' + + compatible: + oneOf: + - enum: + - ingenic,jz4770-musb + - ingenic,jz4740-musb + - items: + - const: ingenic,jz4725b-musb + - const: ingenic,jz4740-musb + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: udc + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: mc + + phys: + description: PHY specifier for the USB PHY + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - phys + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + usb_phy: usb-phy@0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + udc: usb@13040000 { + compatible = "ingenic,jz4740-musb"; + reg = <0x13040000 0x10000>; + + interrupt-parent = <&intc>; + interrupts = <24>; + interrupt-names = "mc"; + + clocks = <&cgu JZ4740_CLK_UDC>; + clock-names = "udc"; + + phys = <&usb_phy>; + }; diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml new file mode 100644 index 000000000000..4241d38d5864 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/maxim,max3420-udc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAXIM MAX3420/1 USB Peripheral Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +description: | + The controller provices USB2.0 compliant FullSpeed peripheral + implementation over the SPI interface. + + Specifications about the part can be found at: + http://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf + +properties: + compatible: + enum: + - maxim,max3420-udc + - maxim,max3421-udc + + reg: + maxItems: 1 + + interrupts: + items: + - description: usb irq from max3420 + - description: vbus detection irq + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: udc + - const: vbus + minItems: 1 + maxItems: 2 + + spi-max-frequency: + maximum: 26000000 + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + udc@0 { + compatible = "maxim,max3420-udc"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "udc", "vbus"; + spi-max-frequency = <12500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9e67944bec9c..fba343fa0205 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -205,6 +205,8 @@ patternProperties: description: Colorful GRP, Shenzhen Xueyushi Technology Ltd. "^compulab,.*": description: CompuLab Ltd. + "^coreriver,.*": + description: CORERIVER Semiconductor Co.,Ltd. "^corpro,.*": description: Chengdu Corpro Technology Co., Ltd. "^cortina,.*": @@ -267,6 +269,8 @@ patternProperties: description: Dragino Technology Co., Limited "^dserve,.*": description: dServe Technology B.V. + "^dynaimage,.*": + description: Dyna-Image "^ea,.*": description: Embedded Artists AB "^ebs-systart,.*": |