diff options
Diffstat (limited to 'Documentation/devicetree')
417 files changed, 15300 insertions, 7667 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 9fda2436c618..e16b5fa55847 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -163,6 +163,7 @@ properties: - azw,gsking-x - azw,gtking - azw,gtking-pro + - hardkernel,odroid-go-ultra - hardkernel,odroid-n2 - hardkernel,odroid-n2-plus - khadas,vim3 diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml index 7262f3c09867..da78c69774f2 100644 --- a/Documentation/devicetree/bindings/arm/apple.yaml +++ b/Documentation/devicetree/bindings/arm/apple.yaml @@ -19,12 +19,14 @@ description: | - MacBook Air (M1, 2020) - iMac (24-inch, M1, 2021) - And devices based on the "M1 Pro" and "M1 Max" SoCs: + And devices based on the "M1 Pro", "M1 Max" and "M1 Ultra" SoCs: - MacBook Pro (14-inch, M1 Pro, 2021) - MacBook Pro (14-inch, M1 Max, 2021) - MacBook Pro (16-inch, M1 Pro, 2021) - MacBook Pro (16-inch, M1 Max, 2021) + - Mac Studio (M1 Max, 2022) + - Mac Studio (M1 Ultra, 2022) The compatible property should follow this format: @@ -67,6 +69,7 @@ properties: - apple,j457 # iMac (24-inch, 2x USB-C, M1, 2021) - const: apple,t8103 - const: apple,arm-platform + - description: Apple M1 Pro SoC based platforms items: - enum: @@ -74,14 +77,23 @@ properties: - apple,j316s # MacBook Pro (16-inch, M1 Pro, 2021) - const: apple,t6000 - const: apple,arm-platform + - description: Apple M1 Max SoC based platforms items: - enum: - apple,j314c # MacBook Pro (14-inch, M1 Max, 2021) - apple,j316c # MacBook Pro (16-inch, M1 Max, 2021) + - apple,j375c # Mac Studio (M1 Max, 2022) - const: apple,t6001 - const: apple,arm-platform + - description: Apple M1 Ultra SoC based platforms + items: + - enum: + - apple,j375d # Mac Studio (M1 Ultra, 2022) + - const: apple,t6002 + - const: apple,arm-platform + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 217a1d674863..73f272664e83 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -17,6 +17,7 @@ properties: - description: AST2400 based boards items: - enum: + - delta,ahe50dc-bmc - facebook,galaxy100-bmc - facebook,wedge100-bmc - facebook,wedge40-bmc @@ -82,7 +83,7 @@ properties: - ibm,tacoma-bmc - inventec,transformer-bmc - jabil,rbp-bmc - - nuvia,dc-scm-bmc + - qcom,dc-scm-v1-bmc - quanta,s6q-bmc - const: aspeed,ast2600 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 958df32b4899..52b575c40599 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -66,6 +66,7 @@ properties: - enum: - asus,rt-ac88u - dlink,dir-885l + - dlink,dir-890l - linksys,panamera - luxul,abr-4500-v1 - luxul,xap-1610-v1 @@ -97,6 +98,7 @@ properties: - description: BCM53016 based boards items: - enum: + - dlink,dwl-8610ap - meraki,mr32 - const: brcm,bcm53016 - const: brcm,bcm4708 diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 5c13b73e4d57..7dd84f8f8e4f 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -178,11 +178,13 @@ properties: - qcom,kryo250 - qcom,kryo260 - qcom,kryo280 + - qcom,kryo360 - qcom,kryo385 - qcom,kryo468 - qcom,kryo485 - qcom,kryo560 - qcom,kryo570 + - qcom,kryo660 - qcom,kryo685 - qcom,kryo780 - qcom,scorpion diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index fbfc4f99c01e..05b5276a0e14 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -520,6 +520,7 @@ properties: items: - enum: - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board + - kobo,aura2 - kobo,tolino-shine2hd - kobo,tolino-shine3 - kobo,tolino-vision5 @@ -814,6 +815,7 @@ properties: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board + - cloos,imx8mm-phg # i.MX8MM Cloos PHG Board - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board @@ -825,6 +827,7 @@ properties: - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board + - innocomm,wb15-evk # i.MX8MM Innocomm EVK board with WB15 SoM - kontron,imx8mm-sl # i.MX8MM Kontron SL (N801X) SOM - kontron,imx8mm-osm-s # i.MX8MM Kontron OSM-S (N802X) SOM - menlo,mx8menlo # i.MX8MM Menlo board with Verdin SoM @@ -1067,6 +1070,18 @@ properties: - fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board - const: fsl,imx93 + - description: i.MXRT1050 based Boards + items: + - enum: + - fsl,imxrt1050-evk # i.MXRT1050 EVK Board + - const: fsl,imxrt1050 + + - description: i.MXRT1170 based Boards + items: + - enum: + - fsl,imxrt1170-evk # i.MXRT1170 EVK Board + - const: fsl,imxrt1170 + - description: Freescale Vybrid Platform Device Tree Bindings diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index d76ce4c3819d..2275e5d93721 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -58,6 +58,7 @@ properties: - items: - enum: - mediatek,mt6795-evb + - sony,xperia-m5 - const: mediatek,mt6795 - items: - enum: @@ -83,6 +84,7 @@ properties: - const: mediatek,mt7629 - items: - enum: + - bananapi,bpi-r3 - mediatek,mt7986a-rfb - const: mediatek,mt7986a - items: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index eb451bec23d3..0711f1834fbd 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -32,14 +32,26 @@ properties: - mediatek,mt8183-mmsys - mediatek,mt8186-mmsys - mediatek,mt8192-mmsys - - mediatek,mt8195-mmsys - mediatek,mt8365-mmsys - const: syscon + + - description: vdosys0 and vdosys1 are 2 display HW pipelines, + so mt8195 binding should be deprecated. + deprecated: true + items: + - const: mediatek,mt8195-mmsys + - const: syscon + - items: - const: mediatek,mt7623-mmsys - const: mediatek,mt2701-mmsys - const: syscon + - items: + - const: mediatek,mt8195-vdosys0 + - const: mediatek,mt8195-mmsys + - const: syscon + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml index 5ea506412b4e..38efcad56dbd 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -31,6 +31,7 @@ properties: - qcom,sm8250-llcc - qcom,sm8350-llcc - qcom,sm8450-llcc + - qcom,sm8550-llcc reg: items: diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml new file mode 100644 index 000000000000..e333ec4a9c5f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/qcom-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC compatibles naming convention + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: | + Guidelines for new compatibles for SoC blocks/components. + When adding new compatibles in new bindings, use the format:: + qcom,SoC-IP + + For example:: + qcom,sdm845-llcc-bwmon + + When adding new compatibles to existing bindings, use the format in the + existing binding, even if it contradicts the above. + +select: + properties: + compatible: + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + required: + - compatible + +properties: + compatible: + oneOf: + # Preferred naming style for compatibles of SoC components: + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$" + - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" + + # Legacy namings - variations of existing patterns/compatibles are OK, + # but do not add completely new entries to these: + - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - enum: + - qcom,dsi-ctrl-6g-qcm2290 + - qcom,gpucc-sdm630 + - qcom,gpucc-sdm660 + - qcom,lcc-apq8064 + - qcom,lcc-ipq8064 + - qcom,lcc-mdm9615 + - qcom,lcc-msm8960 + - qcom,lpass-cpu-apq8016 + - qcom,usb-ss-ipq4019-phy + - qcom,usb-hs-ipq4019-phy + - qcom,vqmmc-ipq4019-regulator + + # Legacy compatibles with wild-cards - list cannot grow with new bindings: + - enum: + - qcom,ipq806x-gmac + - qcom,ipq806x-nand + - qcom,ipq806x-sata-phy + - qcom,ipq806x-usb-phy-ss + - qcom,ipq806x-usb-phy-hs + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 1b5ac6b02bc5..27063a045bd0 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -29,17 +29,22 @@ description: | apq8074 apq8084 apq8096 + ipq4018 ipq6018 ipq8074 mdm9615 msm8226 msm8916 + msm8956 msm8974 + msm8976 msm8992 msm8994 msm8996 msm8998 qcs404 + qdu1000 + qru1000 sa8155p sa8540p sc7180 @@ -51,11 +56,15 @@ description: | sdm632 sdm636 sdm660 + sdm670 sdm845 sdx55 sdx65 + sm4250 + sm6115 sm6125 sm6350 + sm6375 sm7225 sm8150 sm8250 @@ -76,6 +85,7 @@ description: | mtp qrd sbc + x100 The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> where the minor number may be omitted when it's zero, i.e. v1.0 is the same @@ -114,7 +124,9 @@ properties: - items: - enum: - asus,sparrow + - huawei,sturgeon - lg,lenok + - samsung,matisse-wifi - const: qcom,apq8026 - items: @@ -150,20 +162,32 @@ properties: - items: - enum: + - sony,kugo-row + - sony,suzu-row + - const: qcom,msm8956 + + - items: + - enum: - qcom,msm8960-cdp - const: qcom,msm8960 - items: - enum: - - fairphone,fp2 - lge,hammerhead - - samsung,klte - sony,xperia-amami - - sony,xperia-castor - sony,xperia-honami - const: qcom,msm8974 - items: + - enum: + - fairphone,fp2 + - oneplus,bacon + - samsung,klte + - sony,xperia-castor + - const: qcom,msm8974pro + - const: qcom,msm8974 + + - items: - const: qcom,msm8916-mtp - const: qcom,msm8916-mtp/1 - const: qcom,msm8916 @@ -221,13 +245,20 @@ properties: - items: - enum: + - oneplus,oneplus3 + - oneplus,oneplus3t - qcom,msm8996-mtp - sony,dora-row - sony,kagura-row - sony,keyaki-row - xiaomi,gemini + - const: qcom,msm8996 + + - items: + - enum: - xiaomi,natrium - xiaomi,scorpio + - const: qcom,msm8996pro - const: qcom,msm8996 - items: @@ -242,10 +273,17 @@ properties: - sony,xperia-lilac - sony,xperia-maple - sony,xperia-poplar + - xiaomi,sagit - const: qcom,msm8998 - items: - enum: + - 8dev,jalapeno + - alfa-network,ap120c-ac + - const: qcom,ipq4018 + + - items: + - enum: - qcom,ipq4019-ap-dk01.1-c1 - qcom,ipq4019-ap-dk04.1-c3 - qcom,ipq4019-ap-dk07.1-c1 @@ -255,6 +293,7 @@ properties: - items: - enum: + - mikrotik,rb3011 - qcom,ipq8064-ap148 - const: qcom,ipq8064 @@ -265,6 +304,25 @@ properties: - qcom,ipq8074-hk10-c2 - const: qcom,ipq8074 + - description: Sierra Wireless MangOH Green with WP8548 Module + items: + - const: swir,mangoh-green-wp8548 + - const: swir,wp8548 + - const: qcom,mdm9615 + + - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform + items: + - enum: + - qcom,qdu1000-idp + - qcom,qdu1000-x100 + - const: qcom,qdu1000 + + - description: Qualcomm Technologies, Inc. Radio Unit 1000 platform + items: + - enum: + - qcom,qru1000-idp + - const: qcom,qru1000 + - description: Qualcomm Technologies, Inc. SC7180 IDP items: - enum: @@ -463,6 +521,17 @@ properties: - const: google,pazquel-sku2 - const: qcom,sc7180 + - description: Google Pazquel360 with LTE (newest rev) + items: + - const: google,pazquel-sku22 + - const: google,pazquel-sku20 + - const: qcom,sc7180 + + - description: Google Pazquel360 with WiFi (newest rev) + items: + - const: google,pazquel-sku21 + - const: qcom,sc7180 + - description: Sharp Dynabook Chromebook C1 (rev1) items: - const: google,pompom-rev1 @@ -575,6 +644,11 @@ properties: - const: google,evoker - const: qcom,sc7280 + - description: Google Evoker with LTE (newest rev) + items: + - const: google,evoker-sku512 + - const: qcom,sc7280 + - description: Google Herobrine (newest rev) items: - const: google,herobrine @@ -595,6 +669,16 @@ properties: - const: google,villager-sku512 - const: qcom,sc7280 + - description: Google Zombie (newest rev) + items: + - const: google,zombie + - const: qcom,sc7280 + + - description: Google Zombie with LTE (newest rev) + items: + - const: google,zombie-sku512 + - const: qcom,sc7280 + - items: - enum: - lenovo,flex-5g @@ -639,6 +723,11 @@ properties: - items: - enum: + - google,sargo + - const: qcom,sdm670 + + - items: + - enum: - qcom,sdx55-mtp - qcom,sdx55-telit-fn980-tlb - qcom,sdx55-t55 @@ -670,10 +759,14 @@ properties: - items: - enum: - qcom,sa8295p-adp + - qcom,sa8540p-ride - const: qcom,sa8540p - items: - enum: + - google,cheza + - google,cheza-rev1 + - google,cheza-rev2 - lenovo,yoga-c630 - lg,judyln - lg,judyp @@ -681,17 +774,24 @@ properties: - oneplus,fajita - qcom,sdm845-mtp - shift,axolotl + - samsung,starqltechn - samsung,w737 - sony,akari-row - sony,akatsuki-row - sony,apollo-row - thundercomm,db845c - xiaomi,beryllium + - xiaomi,beryllium-ebbg - xiaomi,polaris - const: qcom,sdm845 - items: - enum: + - oneplus,billie2 + - const: qcom,sm4250 + + - items: + - enum: - sony,pdx201 - const: qcom,sm6125 @@ -702,6 +802,11 @@ properties: - items: - enum: + - sony,pdx225 + - const: qcom,sm6375 + + - items: + - enum: - fairphone,fp4 - const: qcom,sm7225 @@ -737,8 +842,129 @@ properties: - qcom,sm8450-hdk - qcom,sm8450-qrd - sony,pdx223 + - sony,pdx224 - const: qcom,sm8450 + # Board compatibles go above + + qcom,msm-id: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 8 + items: + items: + - description: | + MSM chipset ID - an exact match value consisting of two bitfields:: + - bits 0-15 - The unique MSM chipset ID + - bits 16-31 - Reserved; should be 0 + - description: | + Hardware revision ID - a chipset specific 32-bit ID representing + the version of the chipset. It is best a match value - the + bootloader will look for the closest possible match. + deprecated: true + description: + The MSM chipset and hardware revision used Qualcomm bootloaders. It + can optionally be an array of these to indicate multiple hardware that + use the same device tree. It is expected that the bootloader will use + this information at boot-up to decide which device tree to use when given + multiple device trees, some of which may not be compatible with the + actual hardware. It is the bootloader's responsibility to pass the + correct device tree to the kernel. + The property is deprecated. + + qcom,board-id: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 8 + oneOf: + - items: + - items: + - description: | + Board ID consisting of three bitfields:: + - bits 31-24 - Unused + - bits 23-16 - Platform Version Major + - bits 15-8 - Platform Version Minor + - bits 7-0 - Platform Type + Platform Type field is an exact match value. The + Platform Major/Minor field is a best match. The bootloader will + look for the closest possible match. + - description: | + Subtype ID unique to a Platform Type/Chipset ID. For a given + Platform Type, there will typically only be a single board and the + subtype_id will be 0. However in some cases board variants may + need to be distinguished by different subtype_id values. + - items: + # OnePlus uses a variant of board-id with four elements: + - items: + - const: 8 + - const: 0 + - description: OnePlus board ID + - description: OnePlus subtype ID + deprecated: true + description: + The board type and revision information. It can optionally be an array + of these to indicate multiple boards that use the same device tree. It + is expected that the bootloader will use this information at boot-up to + decide which device tree to use when given multiple device trees, some of + which may not be compatible with the actual hardware. It is the + bootloader's responsibility to pass the correct device tree to the + kernel + The property is deprecated. + +allOf: + # Explicit allow-list for older SoCs. The legacy properties are not allowed + # on newer SoCs. + - if: + properties: + compatible: + contains: + enum: + - qcom,apq8026 + - qcom,apq8094 + - qcom,apq8096 + - qcom,msm8992 + - qcom,msm8994 + - qcom,msm8996 + - qcom,msm8998 + - qcom,sdm630 + - qcom,sdm632 + - qcom,sdm845 + - qcom,sdx55 + - qcom,sdx65 + - qcom,sm6125 + - qcom,sm6350 + - qcom,sm7225 + - qcom,sm8150 + - qcom,sm8250 + then: + properties: + qcom,board-id: true + qcom,msm-id: true + else: + properties: + qcom,board-id: false + qcom,msm-id: false + + - if: + properties: + compatible: + contains: + enum: + - oneplus,cheeseburger + - oneplus,dumpling + - oneplus,enchilada + - oneplus,fajita + then: + properties: + qcom,board-id: + items: + minItems: 4 + else: + properties: + qcom,board-id: + items: + maxItems: 2 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c6c69a4e3777..88ff4422a8c1 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -30,11 +30,26 @@ properties: - const: amarula,vyasa-rk3288 - const: rockchip,rk3288 + - description: Anbernic RG351M + items: + - const: anbernic,rg351m + - const: rockchip,rk3326 + - description: Anbernic RG353P items: - const: anbernic,rg353p - const: rockchip,rk3566 + - description: Anbernic RG353V + items: + - const: anbernic,rg353v + - const: rockchip,rk3566 + + - description: Anbernic RG353VS + items: + - const: anbernic,rg353vs + - const: rockchip,rk3566 + - description: Anbernic RG503 items: - const: anbernic,rg503 @@ -468,6 +483,21 @@ properties: - const: hardkernel,rk3326-odroid-go2 - const: rockchip,rk3326 + - description: Hardkernel Odroid Go Advance Black Edition + items: + - const: hardkernel,rk3326-odroid-go2-v11 + - const: rockchip,rk3326 + + - description: Hardkernel Odroid Go Super + items: + - const: hardkernel,rk3326-odroid-go3 + - const: rockchip,rk3326 + + - description: Hardkernel Odroid M1 + items: + - const: rockchip,rk3568-odroid-m1 + - const: rockchip,rk3568 + - description: Hugsun X99 TV Box items: - const: hugsun,x99 @@ -563,7 +593,9 @@ properties: - description: Pine64 SoQuartz SoM items: - enum: + - pine64,soquartz-blade - pine64,soquartz-cm4io + - pine64,soquartz-model-a - const: pine64,soquartz - const: rockchip,rk3566 @@ -709,6 +741,11 @@ properties: - const: rockchip,rv1108-evb - const: rockchip,rv1108 + - description: Theobroma Systems PX30-uQ7 with Haikou baseboard + items: + - const: tsd,px30-ringneck-haikou + - const: rockchip,px30 + - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard items: - const: tsd,rk3368-lion-haikou @@ -729,6 +766,11 @@ properties: - const: zkmagic,a95x-z2 - const: rockchip,rk3318 + - description: Rockchip RK3566 BOX Evaluation Demo board + items: + - const: rockchip,rk3566-box-demo + - const: rockchip,rk3566 + - description: Rockchip RK3568 Evaluation board items: - const: rockchip,rk3568-evb1-v10 diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml index 8c0e91658474..c2cea1c90f3c 100644 --- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml @@ -26,6 +26,12 @@ properties: - socionext,uniphier-pro4-ref - socionext,uniphier-pro4-sanji - const: socionext,uniphier-pro4 + - description: Pro5 SoC boards + items: + - enum: + - socionext,uniphier-pro5-epcore + - socionext,uniphier-pro5-proex + - const: socionext,uniphier-pro5 - description: sLD8 SoC boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 4c605bccc474..44f5c5855af8 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -59,6 +59,12 @@ properties: - prt,prtt1s # Protonic PRTT1S - const: st,stm32mp151 + - description: DH STM32MP151 DHCOR SoM based Boards + items: + - const: dh,stm32mp151a-dhcor-testbench + - const: dh,stm32mp151a-dhcor-som + - const: st,stm32mp151 + - description: DH STM32MP153 DHCOM SoM based Boards items: - const: dh,stm32mp153c-dhcom-drc02 diff --git a/Documentation/devicetree/bindings/arm/swir.txt b/Documentation/devicetree/bindings/arm/swir.txt deleted file mode 100644 index 042be73a95d3..000000000000 --- a/Documentation/devicetree/bindings/arm/swir.txt +++ /dev/null @@ -1,12 +0,0 @@ -Sierra Wireless Modules device tree bindings --------------------------------------------- - -Supported Modules : - - WP8548 : Includes MDM9615 and PM8018 in a module - -Sierra Wireless modules shall have the following properties : - Required root node property - - compatible: "swir,wp8548" for the WP8548 CF3 Module - -Board compatible values: - - "swir,mangoh-green-wp8548" for the mangOH green board with the WP8548 module diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 28b8232e1c5b..09e6845ff243 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -61,6 +61,7 @@ properties: - const: ti,j721e - items: - enum: + - beagle,j721e-beagleboneai64 - ti,j721e-evm - ti,j721e-sk - const: ti,j721e diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml index 50ebd8c57795..defcf1e12aa1 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -48,6 +48,7 @@ examples: cros_ec: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; + interrupts = <35 0>; typec { compatible = "google,cros-ec-typec"; diff --git a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml index 5b875af6a95a..40244d003c32 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml @@ -27,6 +27,7 @@ examples: cros_ec: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; + interrupts = <15 0>; kbd-led-backlight { compatible = "google,cros-kbd-led-backlight"; diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml new file mode 100644 index 000000000000..bbd22e95b319 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,imx8m-anatop.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Family Anatop Module + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + NXP i.MX8M Family anatop PLL module which generates PLL to CCM root. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx8mm-anatop + - fsl,imx8mq-anatop + - items: + - enum: + - fsl,imx8mn-anatop + - fsl,imx8mp-anatop + - const: fsl,imx8mm-anatop + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + anatop: clock-controller@30360000 { + compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop"; + reg = <0x30360000 0x10000>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt index 958e0ad78c52..f7d347385b57 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -136,7 +136,7 @@ clock@70110000 { }; /* pinmux nodes added for completeness. Binding doc can be found in: - * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt + * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml */ pinmux: pinmux@700008d4 { diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml index 2ab4642679c0..55c4f94a14d1 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml @@ -148,7 +148,7 @@ allOf: items: - const: oscclk - const: dout_clkcmu_fsys1_bus - - const: dout_clkcmu_fsys1_mmc_card + - const: gout_clkcmu_fsys1_mmc_card - const: dout_clkcmu_fsys1_usbdrd - if: diff --git a/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml new file mode 100644 index 000000000000..76cb9726660e --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/apple,cluster-cpufreq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SoC cluster cpufreq device + +maintainers: + - Hector Martin <marcan@marcan.st> + +description: | + Apple SoCs (e.g. M1) have a per-cpu-cluster DVFS controller that is part of + the cluster management register block. This binding uses the standard + operating-points-v2 table to define the CPU performance states, with the + opp-level property specifying the hardware p-state index for that level. + +properties: + compatible: + oneOf: + - items: + - enum: + - apple,t8103-cluster-cpufreq + - apple,t8112-cluster-cpufreq + - const: apple,cluster-cpufreq + - items: + - const: apple,t6000-cluster-cpufreq + - const: apple,t8103-cluster-cpufreq + - const: apple,cluster-cpufreq + + reg: + maxItems: 1 + + '#performance-domain-cells': + const: 0 + +required: + - compatible + - reg + - '#performance-domain-cells' + +additionalProperties: false + +examples: + - | + // This example shows a single CPU per domain and 2 domains, + // with two p-states per domain. + // Shipping hardware has 2-4 CPUs per domain and 2-6 domains. + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "apple,icestorm"; + device_type = "cpu"; + reg = <0x0 0x0>; + operating-points-v2 = <&ecluster_opp>; + performance-domains = <&cpufreq_e>; + }; + + cpu@10100 { + compatible = "apple,firestorm"; + device_type = "cpu"; + reg = <0x0 0x10100>; + operating-points-v2 = <&pcluster_opp>; + performance-domains = <&cpufreq_p>; + }; + }; + + ecluster_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-level = <1>; + clock-latency-ns = <7500>; + }; + opp02 { + opp-hz = /bits/ 64 <972000000>; + opp-level = <2>; + clock-latency-ns = <22000>; + }; + }; + + pcluster_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-level = <1>; + clock-latency-ns = <8000>; + }; + opp02 { + opp-hz = /bits/ 64 <828000000>; + opp-level = <2>; + clock-latency-ns = <19000>; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + cpufreq_e: performance-controller@210e20000 { + compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq"; + reg = <0x2 0x10e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + cpufreq_p: performance-controller@211e20000 { + compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq"; + reg = <0x2 0x11e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index 24fa3d87a40b..903b31129f01 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -25,6 +25,7 @@ properties: - description: v2 of CPUFREQ HW (EPSS) items: - enum: + - qcom,qdu1000-cpufreq-epss - qcom,sm6375-cpufreq-epss - qcom,sm8250-cpufreq-epss - const: qcom,cpufreq-epss @@ -56,6 +57,9 @@ properties: '#freq-domain-cells': const: 1 + '#clock-cells': + const: 1 + required: - compatible - reg @@ -83,11 +87,16 @@ examples: enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + clocks = <&cpufreq_hw 0>; L2_0: l2-cache { compatible = "cache"; + cache-unified; + cache-level = <2>; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-unified; + cache-level = <3>; }; }; }; @@ -99,8 +108,11 @@ examples: enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + clocks = <&cpufreq_hw 0>; L2_100: l2-cache { compatible = "cache"; + cache-unified; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -112,8 +124,11 @@ examples: enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + clocks = <&cpufreq_hw 0>; L2_200: l2-cache { compatible = "cache"; + cache-unified; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -125,8 +140,11 @@ examples: enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + clocks = <&cpufreq_hw 0>; L2_300: l2-cache { compatible = "cache"; + cache-unified; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -138,8 +156,11 @@ examples: enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + clocks = <&cpufreq_hw 1>; L2_400: l2-cache { compatible = "cache"; + cache-unified; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -151,8 +172,11 @@ examples: enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + clocks = <&cpufreq_hw 1>; L2_500: l2-cache { compatible = "cache"; + cache-unified; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -164,8 +188,11 @@ examples: enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + clocks = <&cpufreq_hw 1>; L2_600: l2-cache { compatible = "cache"; + cache-unified; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -177,8 +204,11 @@ examples: enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 1>; + clocks = <&cpufreq_hw 1>; L2_700: l2-cache { compatible = "cache"; + cache-unified; + cache-level = <2>; next-level-cache = <&L3_0>; }; }; @@ -197,6 +227,7 @@ examples: clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; ... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 7910831fa4b8..c731fbdc2fe0 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -12,9 +12,14 @@ maintainers: properties: compatible: - enum: - - allwinner,sun6i-a31-mipi-dsi - - allwinner,sun50i-a64-mipi-dsi + oneOf: + - enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi + - allwinner,sun50i-a100-mipi-dsi + - items: + - const: allwinner,sun20i-d1-mipi-dsi + - const: allwinner,sun50i-a100-mipi-dsi reg: maxItems: 1 @@ -59,7 +64,6 @@ required: - phys - phy-names - resets - - vcc-dsi-supply - port allOf: @@ -68,7 +72,9 @@ allOf: properties: compatible: contains: - const: allwinner,sun6i-a31-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a100-mipi-dsi then: properties: @@ -78,16 +84,22 @@ allOf: required: - clock-names + else: + properties: + clocks: + maxItems: 1 + - if: properties: compatible: contains: - const: allwinner,sun50i-a64-mipi-dsi + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi then: - properties: - clocks: - minItems: 1 + required: + - vcc-dsi-supply unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index 7cdffdb131ac..74cefdf1b843 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -11,7 +11,7 @@ maintainers: - Neil Armstrong <neil.armstrong@linaro.org> allOf: - - $ref: /schemas/sound/name-prefix.yaml# + - $ref: /schemas/sound/dai-common.yaml# description: | The Amlogic Meson Synopsys Designware Integration is composed of diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml new file mode 100644 index 000000000000..131d5b63ec4f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L MIPI DSI Encoder + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This binding describes the MIPI DSI encoder embedded in the Renesas + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with + up to four data lanes. + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC} + - const: renesas,rzg2l-mipi-dsi + + reg: + maxItems: 1 + + interrupts: + items: + - description: Sequence operation channel 0 interrupt + - description: Sequence operation channel 1 interrupt + - description: Video-Input operation channel 1 interrupt + - description: DSI Packet Receive interrupt + - description: DSI Fatal Error interrupt + - description: DSI D-PHY PPI interrupt + - description: Debug interrupt + + interrupt-names: + items: + - const: seq0 + - const: seq1 + - const: vin1 + - const: rcv + - const: ferr + - const: ppi + - const: debug + + clocks: + items: + - description: DSI D-PHY PLL multiplied clock + - description: DSI D-PHY system clock + - description: DSI AXI bus clock + - description: DSI Register access clock + - description: DSI Video clock + - description: DSI D-PHY Escape mode transmit clock + + clock-names: + items: + - const: pllclk + - const: sysclk + - const: aclk + - const: pclk + - const: vclk + - const: lpclk + + resets: + items: + - description: MIPI_DSI_CMN_RSTB + - description: MIPI_DSI_ARESET_N + - description: MIPI_DSI_PRESET_N + + reset-names: + items: + - const: rst + - const: arst + - const: prst + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi0: dsi@10850000 { + compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi"; + reg = <0x10850000 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index 5bb23e97cf33..d976380801e3 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -23,6 +23,7 @@ properties: - mediatek,mt8173-dpi - mediatek,mt8183-dpi - mediatek,mt8186-dpi + - mediatek,mt8188-dp-intf - mediatek,mt8192-dpi - mediatek,mt8195-dp-intf diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml new file mode 100644 index 000000000000..8ffbc30c6b7f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml @@ -0,0 +1,52 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU common properties + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: | + Common properties for QCom DPU display controller. + +properties: + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. + + patternProperties: + "^port@[0-9a-f]+$": + $ref: /schemas/graph.yaml#/properties/port + + # at least one port is required + required: + - port@0 + +required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml deleted file mode 100644 index 253665c693e6..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ /dev/null @@ -1,223 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for MSM8998 target - -maintainers: - - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for MSM8998 target. - -properties: - compatible: - items: - - const: qcom,msm8998-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock - - description: Display AXI clock - - description: Display core clock - - clock-names: - items: - - const: iface - - const: bus - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - items: - - const: qcom,msm8998-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for regdma register set - - description: Address offset and size for vbif register set - - description: Address offset and size for non-realtime vbif register set - - reg-names: - items: - - const: mdp - - const: regdma - - const: vbif - - const: vbif_nrt - - clocks: - items: - - description: Display ahb clock - - description: Display axi clock - - description: Display mem-noc clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: iface - - const: bus - - const: mnoc - - const: core - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,mmcc-msm8998.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - mdss: display-subsystem@c900000 { - compatible = "qcom,msm8998-mdss"; - reg = <0x0c900000 0x1000>; - reg-names = "mdss"; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - #address-cells = <1>; - #interrupt-cells = <1>; - #size-cells = <1>; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - iommus = <&mmss_smmu 0>; - - power-domains = <&mmcc MDSS_GDSC>; - ranges; - - display-controller@c901000 { - compatible = "qcom,msm8998-dpu"; - reg = <0x0c901000 0x8f000>, - <0x0c9a8e00 0xf0>, - <0x0c9b0000 0x2008>, - <0x0c9b8000 0x1040>; - reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MNOC_AHB_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "mnoc", "core", "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmpd MSM8998_VDDMX>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml deleted file mode 100644 index c5824e1d2382..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ /dev/null @@ -1,222 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for QCM2290 target - -maintainers: - - Loic Poulain <loic.poulain@linaro.org> - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS - and DPU are mentioned for QCM2290 target. - -properties: - compatible: - items: - - const: qcom,qcm2290-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AXI clock - - description: Display core clock - - clock-names: - items: - - const: iface - - const: bus - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 - - ranges: true - - interconnects: - items: - - description: Interconnect path specifying the port ids for data bus - - interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - items: - - const: qcom,qcm2290-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display AXI clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock from dispcc - - description: Display lut clock from dispcc - - description: Display vsync clock from dispcc - - clock-names: - items: - - const: bus - - const: iface - - const: core - - const: lut - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> - #include <dt-bindings/clock/qcom,gcc-qcm2290.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interconnect/qcom,qcm2290.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - mdss: mdss@5e00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qcm2290-mdss"; - reg = <0x05e00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x420 0x2>, - <&apps_smmu 0x421 0x0>; - ranges; - - mdss_mdp: display-controller@5e01000 { - compatible = "qcom,qcm2290-dpu"; - reg = <0x05e01000 0x8f000>, - <0x05eb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", "iface", "core", "lut", "vsync"; - - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmpd QCM2290_VDDCX>; - - interrupt-parent = <&mdss>; - interrupts = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml deleted file mode 100644 index 4890bc25f3fd..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ /dev/null @@ -1,235 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SC7180 target - -maintainers: - - Krishna Manikandan <quic_mkrishn@quicinc.com> - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SC7180 target. - -properties: - compatible: - items: - - const: qcom,sc7180-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: ahb - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true - - interconnects: - items: - - description: Interconnect path specifying the port ids for data bus - - interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - items: - - const: qcom,sc7180-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display hf axi clock - - description: Display ahb clock - - description: Display rotator clock - - description: Display lut clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: bus - - const: iface - - const: rot - - const: lut - - const: core - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@2: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF0 (DP) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,dispcc-sc7180.h> - #include <dt-bindings/clock/qcom,gcc-sc7180.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interconnect/qcom,sdm845.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sc7180-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "ahb", "core"; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x800 0x2>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sc7180-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_ROT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", "iface", "rot", "lut", "core", - "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SC7180_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@2 { - reg = <2>; - dpu_intf0_out: endpoint { - remote-endpoint = <&dp_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml deleted file mode 100644 index 584d646021d5..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ /dev/null @@ -1,239 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SC7280 - -maintainers: - - Krishna Manikandan <quic_mkrishn@quicinc.com> - -description: | - Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SC7280. - -properties: - compatible: - const: qcom,sc7280-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display AHB clock from dispcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: ahb - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - ranges: true - - interconnects: - items: - - description: Interconnect path specifying the port ids for data bus - - interconnect-names: - const: mdp0-mem - - resets: - items: - - description: MDSS_CORE reset - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - const: qcom,sc7280-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display hf axi clock - - description: Display sf axi clock - - description: Display ahb clock - - description: Display lut clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: bus - - const: nrt_bus - - const: iface - - const: lut - - const: core - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF5 (EDP) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,dispcc-sc7280.h> - #include <dt-bindings/clock/qcom,gcc-sc7280.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interconnect/qcom,sc7280.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sc7280-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", - "ahb", - "core"; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; - - iommus = <&apps_smmu 0x900 0x402>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sc7280-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&gcc GCC_DISP_SF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", - "nrt_bus", - "iface", - "lut", - "core", - "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf5_out: endpoint { - remote-endpoint = <&edp_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml deleted file mode 100644 index 7d1037373175..000000000000 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ /dev/null @@ -1,217 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Display DPU dt properties for SDM845 target - -maintainers: - - Krishna Manikandan <quic_mkrishn@quicinc.com> - -description: | - Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates - sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree - bindings of MDSS and DPU are mentioned for SDM845 target. - -properties: - compatible: - items: - - const: qcom,sdm845-mdss - - reg: - maxItems: 1 - - reg-names: - const: mdss - - power-domains: - maxItems: 1 - - clocks: - items: - - description: Display AHB clock from gcc - - description: Display core clock - - clock-names: - items: - - const: iface - - const: core - - interrupts: - maxItems: 1 - - interrupt-controller: true - - "#address-cells": true - - "#size-cells": true - - "#interrupt-cells": - const: 1 - - iommus: - items: - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 - - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 - - ranges: true - - resets: - items: - - description: MDSS_CORE reset - -patternProperties: - "^display-controller@[0-9a-f]+$": - type: object - description: Node containing the properties of DPU. - additionalProperties: false - - properties: - compatible: - items: - - const: qcom,sdm845-dpu - - reg: - items: - - description: Address offset and size for mdp register set - - description: Address offset and size for vbif register set - - reg-names: - items: - - const: mdp - - const: vbif - - clocks: - items: - - description: Display ahb clock - - description: Display axi clock - - description: Display core clock - - description: Display vsync clock - - clock-names: - items: - - const: iface - - const: bus - - const: core - - const: vsync - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -required: - - compatible - - reg - - reg-names - - power-domains - - clocks - - interrupts - - interrupt-controller - - iommus - - ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,dispcc-sdm845.h> - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - display-subsystem@ae00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,sdm845-mdss"; - reg = <0x0ae00000 0x1000>; - reg-names = "mdss"; - power-domains = <&dispcc MDSS_GDSC>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "core"; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - iommus = <&apps_smmu 0x880 0x8>, - <&apps_smmu 0xc80 0x8>; - ranges; - - display-controller@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&mdp_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; -... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 3b609c19e0bc..f2c143730a55 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -49,6 +49,7 @@ properties: maxItems: 1 phy-names: + deprecated: true const: dsi "#address-cells": true @@ -80,6 +81,9 @@ properties: operating-points-v2: true + opp-table: + type: object + ports: $ref: "/schemas/graph.yaml#/properties/ports" description: | @@ -131,7 +135,6 @@ required: - clocks - clock-names - phys - - phy-names - assigned-clocks - assigned-clock-parents - power-domains diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 1342d74ecfe0..819de5ce0bc9 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-2290 - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 43d11279c925..65d03c58dee6 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -2,37 +2,9 @@ Qualcomm adreno/snapdragon MDP5 display controller Description: -This is the bindings documentation for the Mobile Display Subsytem(MDSS) that -encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display +This is the bindings documentation for the MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. -MDSS: -Required properties: -- compatible: - * "qcom,mdss" - MDSS -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdss_phys" - * "vbif_phys" -- interrupts: The interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "iface" - * "bus" - * "vsync" -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - MDP5: Required properties: - compatible: diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml new file mode 100644 index 000000000000..27d7242657b2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display MDSS common properties + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. + +properties: + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + minItems: 1 + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 + + ranges: true + + interconnects: + minItems: 1 + items: + - description: Interconnect path from mdp0 (or a single mdp) port to the data bus + - description: Interconnect path from mdp1 port to the data bus + + interconnect-names: + minItems: 1 + items: + - const: mdp0-mem + - const: mdp1-mem + + resets: + items: + - description: MDSS_CORE reset + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml new file mode 100644 index 000000000000..ba0460268731 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Mobile Display SubSystem (MDSS) + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: + This is the bindings documentation for the Mobile Display Subsytem(MDSS) that + encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. + +properties: + compatible: + enum: + - qcom,mdss + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: mdss_phys + - const: vbif_phys + - const: vbif_nrt_phys + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + power-domains: + maxItems: 1 + description: | + The MDSS power domain provided by GCC + + clocks: + minItems: 1 + items: + - description: Display abh clock + - description: Display axi clock + - description: Display vsync clock + + clock-names: + minItems: 1 + items: + - const: iface + - const: bus + - const: vsync + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + resets: + items: + - description: MDSS_CORE reset + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - "#interrupt-cells" + - power-domains + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "^mdp@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + const: qcom,mdp5 + + "^dsi@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-660 + - qcom,dsi-phy-14nm-8953 + - qcom,dsi-phy-20nm + - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-lp + + "^hdmi-phy@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,hdmi-phy-8084 + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + - qcom,hdmi-phy-8974 + - qcom,hdmi-phy-8996 + + "^hdmi-tx@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + mdss@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml new file mode 100644 index 000000000000..b02adba36e9e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for MSM8998 target + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,msm8998-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for regdma register set + - description: Address offset and size for vbif register set + - description: Address offset and size for non-realtime vbif register set + + reg-names: + items: + - const: mdp + - const: regdma + - const: vbif + - const: vbif_nrt + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display mem-noc clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: mnoc + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml new file mode 100644 index 000000000000..cf52ff77a41a --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml @@ -0,0 +1,268 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8998 Display MDSS + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for MSM8998 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,msm8998-mdss + + clocks: + items: + - description: Display AHB clock + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,msm8998-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm-8998 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@c900000 { + compatible = "qcom,msm8998-mdss"; + reg = <0x0c900000 0x1000>; + reg-names = "mdss"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + #address-cells = <1>; + #interrupt-cells = <1>; + #size-cells = <1>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + iommus = <&mmss_smmu 0>; + + power-domains = <&mmcc MDSS_GDSC>; + ranges; + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@c994000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c994000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@c994400 { + compatible = "qcom,dsi-phy-10nm-8998"; + reg = <0x0c994400 0x200>, + <0x0c994600 0x280>, + <0x0c994a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + vdds-supply = <&pm8998_l1>; + }; + + dsi@c996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0c996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_BYTE1_INTF_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@c996400 { + compatible = "qcom,dsi-phy-10nm-8998"; + reg = <0x0c996400 0x200>, + <0x0c996600 0x280>, + <0x0c996a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + vdds-supply = <&pm8998_l1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml new file mode 100644 index 000000000000..a7b382f01b56 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for QCM2290 target + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,qcm2290-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock from dispcc + - description: Display lut clock from dispcc + - description: Display vsync clock from dispcc + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml new file mode 100644 index 000000000000..d6f043a4b08d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCM220 Display MDSS + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + are mentioned for QCM2290 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,qcm2290-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,qcm2290-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-ctrl-6g-qcm2290 + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-14nm-2290 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,qcm2290.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qcm2290-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,dsi-ctrl-6g-qcm2290"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + vcca-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml new file mode 100644 index 000000000000..bd590a6b5b96 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7180 target + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sc7180-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display ahb clock + - description: Display rotator clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: iface + - const: rot + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml new file mode 100644 index 000000000000..13e396d61a51 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -0,0 +1,304 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SC7180 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sc7180-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7180-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7180-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7180-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x800 0x2>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + phys = <&dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml new file mode 100644 index 000000000000..924059b387b6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7280 + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sc7280-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml new file mode 100644 index 000000000000..a3de1744ba11 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -0,0 +1,422 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SC7280. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sc7280-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 1 + + interconnect-names: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^edp@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc7280-edp + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + enum: + - qcom,sc7280-dsi-phy-7nm + - qcom,sc7280-edp-phy + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7280-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + phys = <&mdss_dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi_phy: phy@ae94400 { + compatible = "qcom,sc7280-dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + vdds-supply = <&vreg_dsi_supply>; + }; + + edp@aea0000 { + compatible = "qcom,sc7280-edp"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hot_plug_det>; + + reg = <0xaea0000 0x200>, + <0xaea0200 0x200>, + <0xaea0400 0xc00>, + <0xaea1000 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; + + phys = <&mdss_edp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_edp_out: endpoint { }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp_phy: phy@aec2a00 { + compatible = "qcom,sc7280-edp-phy"; + + reg = <0xaec2a00 0x19c>, + <0xaec2200 0xa0>, + <0xaec2600 0xa0>, + <0xaec2000 0x1c0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_EDP_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sc7280-dp"; + + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml new file mode 100644 index 000000000000..5719b45f2860 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SDM845 target + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sdm845-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display GCC bus clock + - description: Display ahb clock + - description: Display axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: gcc-bus + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml new file mode 100644 index 000000000000..31ca6f99fc22 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml @@ -0,0 +1,270 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SDM845 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sdm845-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sdm845-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sdm845-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml new file mode 100644 index 000000000000..4a39a3031409 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SM6115 target + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6115-dpu + + reg: + items: + - description: MDP register set + - description: VBIF register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI + - description: Display AHB + - description: Display core + - description: Display lut + - description: Display rotator + - description: Display vsync + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: rot + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm6115-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "rot", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml new file mode 100644 index 000000000000..a86d7f53fa84 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + are mentioned for SM6115 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6115-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + iommus: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6115-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-ctrl-6g-qcm2290 + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-14nm-2290 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm6115-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sm6115-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "rot", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,dsi-ctrl-6g-qcm2290"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + phys = <&dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml new file mode 100644 index 000000000000..9ff8a265c85f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Display DPU + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8250-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display hf axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml new file mode 100644 index 000000000000..0d3be5386b3f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -0,0 +1,330 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM8250 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm8250-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8250-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-7nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8250-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml new file mode 100644 index 000000000000..c06902e4fe70 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Jadard JD9365DA-HE WXGA DSI panel + +maintainers: + - Jagan Teki <jagan@edgeble.ai> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - chongzhou,cz101b4001 + - const: jadard,jd9365da-h3 + + reg: true + + vdd-supply: + description: supply regulator for VDD, usually 3.3V + + vccio-supply: + description: supply regulator for VCCIO, usually 1.8V + + reset-gpios: true + + backlight: true + + port: true + +required: + - compatible + - reg + - vdd-supply + - vccio-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/pinctrl/rockchip.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3"; + reg = <0>; + vdd-supply = <&lcd_3v3>; + vccio-supply = <&vcca_1v8>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml new file mode 100644 index 000000000000..116c1b6030a2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NewVision NV3051D based LCD panel + +description: | + The NewVision NV3051D is a driver chip used to drive DSI panels. For now, + this driver only supports the 640x480 panels found in the Anbernic RG353 + based devices. + +maintainers: + - Chris Morgan <macromorgan@hotmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - anbernic,rg353p-panel + - anbernic,rg353v-panel + - const: newvision,nv3051d + + reg: true + backlight: true + port: true + reset-gpios: + description: Active low reset GPIO + vdd-supply: true + +required: + - compatible + - reg + - backlight + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "anbernic,rg353p-panel", "newvision,nv3051d"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc3v3_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index 10ec78ca1c65..554f9d5809d4 100644 --- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -117,6 +117,45 @@ properties: - const: dp-phy0 - const: dp-phy1 + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Connections to the programmable logic and the DisplayPort PHYs. Each port + shall have a single endpoint. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The live video input from the programmable logic + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The live graphics input from the programmable logic + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: The live audio input from the programmable logic + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: The blended video output to the programmable logic + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: The mixed audio output to the programmable logic + + port@5: + $ref: /schemas/graph.yaml#/properties/port + description: The DisplayPort output + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + required: - compatible - reg @@ -130,6 +169,7 @@ required: - dma-names - phys - phy-names + - ports additionalProperties: false @@ -164,6 +204,33 @@ examples: <&psgtr 0 PHY_TYPE_DP 1 3>; phy-names = "dp-phy0", "dp-phy1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + port@3 { + reg = <3>; + }; + port@4 { + reg = <4>; + }; + port@5 { + reg = <5>; + dpsub_dp_out: endpoint { + remote-endpoint = <&dp_connector>; + }; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml index 3b1e667f7ea0..97282469e4af 100644 --- a/Documentation/devicetree/bindings/dma/apple,admac.yaml +++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml @@ -56,6 +56,9 @@ properties: power-domains: maxItems: 1 + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml index 2d82b44268db..2e5b39881449 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml @@ -40,6 +40,7 @@ examples: cros-ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; + interrupts = <44 0>; usbc_extcon0: extcon0 { compatible = "google,extcon-usbc-cros-ec"; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index c5b76c9f7ad0..25688571ee7c 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -41,12 +41,14 @@ properties: - qcom,scm-sc7180 - qcom,scm-sc7280 - qcom,scm-sc8280xp + - qcom,scm-sdm670 - qcom,scm-sdm845 - qcom,scm-sdx55 - qcom,scm-sdx65 - qcom,scm-sm6115 - qcom,scm-sm6125 - qcom,scm-sm6350 + - qcom,scm-sm6375 - qcom,scm-sm8150 - qcom,scm-sm8250 - qcom,scm-sm8350 @@ -88,6 +90,7 @@ allOf: - qcom,scm-apq8064 - qcom,scm-msm8660 - qcom,scm-msm8960 + - qcom,scm-sm6375 then: properties: clock-names: diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml new file mode 100644 index 000000000000..7cc2dd525a96 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra234-nvdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device tree binding for NVIDIA Tegra234 NVDEC + +description: | + NVDEC is the hardware video decoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically + programmed through Host1x channels. + +maintainers: + - Thierry Reding <treding@gmail.com> + - Mikko Perttunen <mperttunen@nvidia.com> + +properties: + $nodename: + pattern: "^nvdec@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra234-nvdec + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: nvdec + - const: fuse + - const: tsec_pka + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + items: + - description: DMA read memory client + - description: DMA write memory client + + interconnect-names: + items: + - const: dma-mem + - const: write + + nvidia,memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the memory controller for determining information for the NVDEC + firmware secure carveout. This carveout is configured by the bootloader and + not accessible to CPU. + + nvidia,bl-manifest-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader manifest from beginning of firmware that was configured by + the bootloader. + + nvidia,bl-code-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader code section from beginning of firmware that was configured by + the bootloader. + + nvidia,bl-data-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader data section from beginning of firmware that was configured by + the bootloader. + + nvidia,os-manifest-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system manifest from beginning of firmware that was configured by + the bootloader. + + nvidia,os-code-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system code section from beginning of firmware that was configured by + the bootloader. + + nvidia,os-data-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system data section from beginning of firmware that was configured + by the bootloader. + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + - nvidia,memory-controller + - nvidia,bl-manifest-offset + - nvidia,bl-code-offset + - nvidia,bl-data-offset + - nvidia,os-manifest-offset + - nvidia,os-code-offset + - nvidia,os-data-offset + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/reset/tegra234-reset.h> + + nvdec@15480000 { + compatible = "nvidia,tegra234-nvdec"; + reg = <0x15480000 0x00040000>; + clocks = <&bpmp TEGRA234_CLK_NVDEC>, + <&bpmp TEGRA234_CLK_FUSE>, + <&bpmp TEGRA234_CLK_TSEC_PKA>; + clock-names = "nvdec", "fuse", "tsec_pka"; + resets = <&bpmp TEGRA234_RESET_NVDEC>; + reset-names = "nvdec"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>; + dma-coherent; + + nvidia,memory-controller = <&mc>; + + /* Placeholder values, to be replaced with values from overlay */ + nvidia,bl-manifest-offset = <0>; + nvidia,bl-data-offset = <0>; + nvidia,bl-code-offset = <0>; + nvidia,os-manifest-offset = <0>; + nvidia,os-data-offset = <0>; + nvidia,os-code-offset = <0>; + }; diff --git a/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml new file mode 100644 index 000000000000..9d0c36ec1982 --- /dev/null +++ b/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwinfo/loongson,ls2k-chipid.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2 SoC ChipID + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +description: | + Loongson-2 SoC contains many groups of global utilities register + blocks, of which the ChipID group registers record SoC version, + feature, vendor and id information. + +properties: + compatible: + const: loongson,ls2k-chipid + + reg: + maxItems: 1 + + little-endian: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + chipid: chipid@1fe00000 { + compatible = "loongson,ls2k-chipid"; + reg = <0x1fe00000 0x3ffc>; + little-endian; + }; diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml index 1c7149f7d171..ee2726149cf3 100644 --- a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml +++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml @@ -15,9 +15,22 @@ description: properties: compatible: - enum: - - qcom,sfpb-mutex - - qcom,tcsr-mutex + oneOf: + - enum: + - qcom,sfpb-mutex + - qcom,tcsr-mutex + - items: + - enum: + - qcom,apq8084-tcsr-mutex + - qcom,ipq6018-tcsr-mutex + - qcom,msm8226-tcsr-mutex + - qcom,msm8994-tcsr-mutex + - const: qcom,tcsr-mutex + - items: + - enum: + - qcom,msm8974-tcsr-mutex + - const: qcom,tcsr-mutex + - const: syscon reg: maxItems: 1 @@ -34,9 +47,9 @@ additionalProperties: false examples: - | - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x01f40000 0x40000>; - #hwlock-cells = <1>; - }; + hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; ... diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml index 6e1c70e9275e..cf523615f5e3 100644 --- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml +++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml @@ -47,6 +47,7 @@ examples: compatible = "google,cros-ec-spi"; reg = <0>; spi-max-frequency = <5000000>; + interrupts = <99 0>; i2c-tunnel { compatible = "google,cros-ec-i2c-tunnel"; diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml index b283c8ca2bbf..5c08d8b6e995 100644 --- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -62,13 +62,6 @@ properties: description: Inform the driver that last channel will be used to sensor battery. - aspeed,trim-data-valid: - type: boolean - description: | - The ADC reference voltage can be calibrated to obtain the trimming - data which will be stored in otp. This property informs the driver that - the data store in the otp is valid. - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 8bac0c4120dd..e94beb2255ba 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -238,42 +238,72 @@ additionalProperties: false examples: - | - spmi_bus { - #address-cells = <1>; - #size-cells = <0>; - /* VADC node */ - pmic_vadc: adc@3100 { - compatible = "qcom,spmi-vadc"; - reg = <0x3100>; - interrupts = <0x0 0x31 0x0 0x1>; + spmi { #address-cells = <1>; #size-cells = <0>; - #io-channel-cells = <1>; - - /* Channel node */ - adc-chan@39 { - reg = <0x39>; - qcom,decimation = <512>; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,avg-samples = <1>; - qcom,pre-scaling = <1 3>; - }; - - adc-chan@9 { - reg = <0x9>; - }; - - adc-chan@a { - reg = <0xa>; + /* VADC node */ + pmic_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 0x1>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* Channel node */ + adc-chan@39 { + reg = <0x39>; + qcom,decimation = <512>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,avg-samples = <1>; + qcom,pre-scaling = <1 3>; + }; + + adc-chan@9 { + reg = <0x9>; + }; + + adc-chan@a { + reg = <0xa>; + }; + + adc-chan@e { + reg = <0xe>; + }; + + adc-chan@f { + reg = <0xf>; + }; }; + }; - adc-chan@e { - reg = <0xe>; - }; + - | + #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> + #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> + #include <dt-bindings/interrupt-controller/irq.h> - adc-chan@f { - reg = <0xf>; + spmi { + #address-cells = <1>; + #size-cells = <0>; + adc@3100 { + reg = <0x3100>; + compatible = "qcom,spmi-adc7"; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* Other properties are omitted */ + xo-therm@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + conn-therm@47 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; }; - }; }; diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index fe1c5016f7f3..1c191bc5a178 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -16,8 +16,11 @@ description: properties: compatible: - items: + oneOf: - const: goodix,gt7375p + - items: + - const: goodix,gt7986u + - const: goodix,gt7375p reg: enum: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 2684562df4d9..be29e0b80995 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -24,7 +24,7 @@ properties: oneOf: - items: - enum: - - qcom,sc7280-bwmon + - qcom,sc7280-cpu-bwmon - qcom,sdm845-bwmon - const: qcom,msm8998-bwmon - const: qcom,msm8998-bwmon # BWMON v4 diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml index 47a78a167aba..06948c0e36a5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml @@ -69,6 +69,35 @@ properties: power-domains: maxItems: 1 + affinities: + type: object + additionalProperties: false + description: + FIQ affinity can be expressed as a single "affinities" node, + containing a set of sub-nodes, one per FIQ with a non-default + affinity. + patternProperties: + "^.+-affinity$": + type: object + additionalProperties: false + properties: + apple,fiq-index: + description: + The interrupt number specified as a FIQ, and for which + the affinity is not the default. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 5 + + cpus: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be a list of phandles to CPU nodes (as described in + Documentation/devicetree/bindings/arm/cpus.yaml). + + required: + - apple,fiq-index + - cpus + required: - compatible - '#interrupt-cells' diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt deleted file mode 100644 index 7d19f494f19a..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt +++ /dev/null @@ -1,26 +0,0 @@ -Interrupt chips ---------------- - -* Intel I/O Advanced Programmable Interrupt Controller (IO APIC) - - Required properties: - -------------------- - compatible = "intel,ce4100-ioapic"; - #interrupt-cells = <2>; - - Device's interrupt property: - - interrupts = <P S>; - - The first number (P) represents the interrupt pin which is wired to the - IO APIC. The second number (S) represents the sense of interrupt which - should be configured and can be one of: - 0 - Edge Rising - 1 - Level Low - 2 - Level High - 3 - Edge Falling - -* Local APIC - Required property: - - compatible = "intel,ce4100-lapic"; diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml new file mode 100644 index 000000000000..39ab8cdd19b4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/intel,ce4100-ioapic.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel I/O Advanced Programmable Interrupt Controller (IO APIC) + +maintainers: + - Rahul Tanwar <rtanwar@maxlinear.com> + +description: | + Intel's Advanced Programmable Interrupt Controller (APIC) is a + family of interrupt controllers. The APIC is a split + architecture design, with a local component (LAPIC) integrated + into the processor itself and an external I/O APIC. Local APIC + (lapic) receives interrupts from the processor's interrupt pins, + from internal sources and from an external I/O APIC (ioapic). + And it sends these to the processor core for handling. + See [1] Chapter 8 for more details. + + Many of the Intel's generic devices like hpet, ioapic, lapic have + the ce4100 name in their compatible property names because they + first appeared in CE4100 SoC. + + This schema defines bindings for I/O APIC interrupt controller. + + [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf + +properties: + compatible: + const: intel,ce4100-ioapic + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + ioapic1: interrupt-controller@fec00000 { + compatible = "intel,ce4100-ioapic"; + reg = <0xfec00000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml new file mode 100644 index 000000000000..d2d0145cb889 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/intel,ce4100-lapic.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel Local Advanced Programmable Interrupt Controller (LAPIC) + +maintainers: + - Rahul Tanwar <rtanwar@maxlinear.com> + +description: | + Intel's Advanced Programmable Interrupt Controller (APIC) is a + family of interrupt controllers. The APIC is a split + architecture design, with a local component (LAPIC) integrated + into the processor itself and an external I/O APIC. Local APIC + (lapic) receives interrupts from the processor's interrupt pins, + from internal sources and from an external I/O APIC (ioapic). + And it sends these to the processor core for handling. + See [1] Chapter 8 for more details. + + Many of the Intel's generic devices like hpet, ioapic, lapic have + the ce4100 name in their compatible property names because they + first appeared in CE4100 SoC. + + This schema defines bindings for local APIC interrupt controller. + + [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf + +properties: + compatible: + const: intel,ce4100-lapic + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + intel,virtual-wire-mode: + description: Intel defines a few possible interrupt delivery + modes. With respect to boot/init time, mainly two interrupt + delivery modes are possible. + PIC Mode - Legacy external 8259 compliant PIC interrupt controller. + Virtual Wire Mode - use lapic as virtual wire interrupt delivery mode. + For ACPI or MPS spec compliant systems, it is figured out by some read + only bit field/s available in their respective defined data structures. + For OF based systems, it is by default set to PIC mode. + But if this optional boolean property is set, then the interrupt delivery + mode is configured to virtual wire compatibility mode. + type: boolean + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + lapic0: interrupt-controller@fee00000 { + compatible = "intel,ce4100-lapic"; + reg = <0xfee00000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + intel,virtual-wire-mode; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongarch,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongarch,cpu-interrupt-controller.yaml new file mode 100644 index 000000000000..2a1cf885c99d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongarch,cpu-interrupt-controller.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/loongarch,cpu-interrupt-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LoongArch CPU Interrupt Controller + +maintainers: + - Liu Peibao <liupeibao@loongson.cn> + +properties: + compatible: + const: loongarch,cpu-interrupt-controller + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + +additionalProperties: false + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + +examples: + - | + interrupt-controller { + compatible = "loongarch,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt deleted file mode 100644 index 5865f4f2c69d..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt +++ /dev/null @@ -1,33 +0,0 @@ -* Mediatek 27xx cirq - -In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to -work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC. -The external interrupts (outside MCUSYS) will feed through CIRQ and connect -to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive -interrupts and generate a pulse signal to parent interrupt controller when -flush command is executed. With CIRQ, MCUSYS can be completely turned off -to improve the system power consumption without losing interrupts. - -Required properties: -- compatible: should be one of - - "mediatek,mt2701-cirq" for mt2701 CIRQ - - "mediatek,mt8135-cirq" for mt8135 CIRQ - - "mediatek,mt8173-cirq" for mt8173 CIRQ - and "mediatek,cirq" as a fallback. -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. -- reg: Physical base address of the cirq registers and length of memory - mapped region. -- mediatek,ext-irq-range: Identifies external irq number range in different - SOCs. - -Example: - cirq: interrupt-controller@10204000 { - compatible = "mediatek,mt2701-cirq", - "mediatek,mtk-cirq"; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&sysirq>; - reg = <0 0x10204000 0 0x400>; - mediatek,ext-irq-start = <32 200>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml new file mode 100644 index 000000000000..fdcb4d8db818 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mtk-cirq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek System Interrupt Controller + +maintainers: + - Youlin Pei <youlin.pei@mediatek.com> + +description: + In MediaTek SoCs, the CIRQ is a low power interrupt controller designed to + work outside of MCUSYS which comprises with Cortex-Ax cores, CCI and GIC. + The external interrupts (outside MCUSYS) will feed through CIRQ and connect + to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive + interrupts and generate a pulse signal to parent interrupt controller when + flush command is executed. With CIRQ, MCUSYS can be completely turned off + to improve the system power consumption without losing interrupts. + + +properties: + compatible: + items: + - enum: + - mediatek,mt2701-cirq + - mediatek,mt8135-cirq + - mediatek,mt8173-cirq + - mediatek,mt8192-cirq + - const: mediatek,mtk-cirq + + reg: + maxItems: 1 + + '#interrupt-cells': + const: 3 + + interrupt-controller: true + + mediatek,ext-irq-range: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: First CIRQ interrupt + - description: Last CIRQ interrupt + description: + Identifies the range of external interrupts in different SoCs + +required: + - compatible + - reg + - '#interrupt-cells' + - interrupt-controller + - mediatek,ext-irq-range + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + cirq: interrupt-controller@10204000 { + compatible = "mediatek,mt2701-cirq", "mediatek,mtk-cirq"; + reg = <0x10204000 0x400>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&sysirq>; + mediatek,ext-irq-range = <32 200>; + }; diff --git a/Documentation/devicetree/bindings/iommu/apple,dart.yaml b/Documentation/devicetree/bindings/iommu/apple,dart.yaml index 82ad669feef7..06af2bacbe97 100644 --- a/Documentation/devicetree/bindings/iommu/apple,dart.yaml +++ b/Documentation/devicetree/bindings/iommu/apple,dart.yaml @@ -22,7 +22,9 @@ description: |+ properties: compatible: - const: apple,t8103-dart + enum: + - apple,t8103-dart + - apple,t6000-dart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml index 704033e21ee8..53945c61325c 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml @@ -21,6 +21,7 @@ properties: - const: allwinner,sun6i-a31-ir - items: - enum: + - allwinner,suniv-f1c100s-ir - allwinner,sun8i-a83t-ir - allwinner,sun8i-r40-ir - allwinner,sun50i-a64-ir diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml index 24d7bf21499e..9d44236f2deb 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml @@ -36,6 +36,9 @@ properties: resets: maxItems: 1 + iommus: + maxItems: 1 + required: - compatible - reg @@ -43,6 +46,7 @@ required: - clocks - clock-names - resets + - iommus additionalProperties: false @@ -59,6 +63,7 @@ examples: clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>; clock-names = "bus", "mod"; resets = <&ccu RST_BUS_VP9>; + iommus = <&iommu 5>; }; ... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml index f1ccca35a790..b3d6db922693 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml @@ -73,6 +73,10 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: MIPI CSI-2 bridge input port + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Internal output port to the ISP + anyOf: - required: - port@0 diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml new file mode 100644 index 000000000000..6bda4f2b94c2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Image Signal Processor Driver (ISP) Device Tree Bindings + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +properties: + compatible: + enum: + - allwinner,sun6i-a31-isp + - allwinner,sun8i-v3s-isp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + - description: DRAM Clock + + clock-names: + items: + - const: bus + - const: mod + - const: ram + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: CSI0 input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: CSI1 input port + + if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-v3s-isp + then: + required: + - port@0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-v3s-ccu.h> + #include <dt-bindings/reset/sun8i-v3s-ccu.h> + + isp: isp@1cb8000 { + compatible = "allwinner,sun8i-v3s-isp"; + reg = <0x01cb8000 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + isp_in_csi0: endpoint { + remote-endpoint = <&csi0_out_isp>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt deleted file mode 100644 index b88dcdd41def..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt +++ /dev/null @@ -1,9 +0,0 @@ -Dongwoon Anatech DW9714 camera voice coil lens driver - -DW9174 is a 10-bit DAC with current sink capability. It is intended -for driving voice coil lenses in camera modules. - -Mandatory properties: - -- compatible: "dongwoon,dw9714" -- reg: I²C slave address diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml new file mode 100644 index 000000000000..66229a3dc05d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9714 camera voice coil lens driver + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + DW9174 is a 10-bit DAC with current sink capability. It is intended for + driving voice coil lenses in camera modules. + +properties: + compatible: + const: dongwoon,dw9714 + + reg: + maxItems: 1 + + powerdown-gpios: + description: + XSD pin for shutdown (active low) + + vcc-supply: + description: VDD power supply + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera-lens@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + vcc-supply = <®_csi_1v8>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/imx290.txt b/Documentation/devicetree/bindings/media/i2c/imx290.txt deleted file mode 100644 index a3cc21410f7c..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/imx290.txt +++ /dev/null @@ -1,57 +0,0 @@ -* Sony IMX290 1/2.8-Inch CMOS Image Sensor - -The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with -Square Pixel for Color Cameras. It is programmable through I2C and 4-wire -interfaces. The sensor output is available via CMOS logic parallel SDR output, -Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the -default. No bindings have been defined for the other busses. - -Required Properties: -- compatible: Should be "sony,imx290" -- reg: I2C bus address of the device -- clocks: Reference to the xclk clock. -- clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock in Hz. -- vdddo-supply: Sensor digital IO regulator. -- vdda-supply: Sensor analog regulator. -- vddd-supply: Sensor digital core regulator. - -Optional Properties: -- reset-gpios: Sensor reset GPIO - -The imx290 device node should contain one 'port' child node with -an 'endpoint' subnode. For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Required Properties on endpoint: -- data-lanes: check ../video-interfaces.txt -- link-frequencies: check ../video-interfaces.txt -- remote-endpoint: check ../video-interfaces.txt - -Example: - &i2c1 { - ... - imx290: camera-sensor@1a { - compatible = "sony,imx290"; - reg = <0x1a>; - - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_rear_default>; - - clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; - clock-names = "xclk"; - clock-frequency = <37125000>; - - vdddo-supply = <&camera_vdddo_1v8>; - vdda-supply = <&camera_vdda_2v8>; - vddd-supply = <&camera_vddd_1v5>; - - port { - imx290_ep: endpoint { - data-lanes = <1 2 3 4>; - link-frequencies = /bits/ 64 <445500000>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml index 39395ea8c318..edde4201116f 100644 --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml @@ -104,6 +104,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c2 { #address-cells = <1>; @@ -124,7 +125,7 @@ examples: remote-endpoint = <&csi2a_ep>; link-frequencies = /bits/ 64 <199200000 210000000 499200000>; - bus-type = <4>; + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt deleted file mode 100644 index 72ad992f77be..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor - -The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with -an active array size of 2592H x 1944V. It is programmable through a serial I2C -interface. - -Required Properties: -- compatible: Value should be "ovti,ov5645". -- clocks: Reference to the xclk clock. -- clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock. -- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds - to the hardware pin PWDNB which is physically active low. -- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to - the hardware pin RESETB. -- vdddo-supply: Chip digital IO regulator. -- vdda-supply: Chip analog regulator. -- vddd-supply: Chip digital core regulator. - -The device node must contain one 'port' child node for its digital output -video port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - - &i2c1 { - ... - - ov5645: ov5645@3c { - compatible = "ovti,ov5645"; - reg = <0x3c>; - - enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_rear_default>; - - clocks = <&clks 200>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - vdddo-supply = <&camera_dovdd_1v8>; - vdda-supply = <&camera_avdd_2v8>; - vddd-supply = <&camera_dvdd_1v2>; - - port { - ov5645_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&csi0_ep>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml new file mode 100644 index 000000000000..50579c947f3c --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV4689 CMOS + +maintainers: + - Mikhail Rudenko <mike.rudenko@gmail.com> + +description: | + The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel + image sensor. Ihis chip supports high frame rate speeds up to 90 fps + at 2688x1520 resolution. It is programmable through an I2C + interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2 + connection. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov4689 + + reg: + maxItems: 1 + + clocks: + description: + External clock (XVCLK) for the sensor, 6-64 MHz + maxItems: 1 + + dovdd-supply: + description: + Digital I/O voltage supply, 1.7-3.0 V + + avdd-supply: + description: + Analog voltage supply, 2.6-3.0 V + + dvdd-supply: + description: + Digital core voltage supply, 1.1-1.3 V + + powerdown-gpios: + description: + GPIO connected to the powerdown pin (active low) + + reset-gpios: + maxItems: 1 + description: + GPIO connected to the reset pin (active low) + + orientation: true + + rotation: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - dovdd-supply + - avdd-supply + - dvdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov4689: camera@36 { + compatible = "ovti,ov4689"; + reg = <0x36>; + + clocks = <&ov4689_clk>; + + avdd-supply = <&ov4689_avdd>; + dovdd-supply = <&ov4689_dovdd>; + dvdd-supply = <&ov4689_dvdd>; + + powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>; + + orientation = <2>; + rotation = <0>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <504000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml new file mode 100644 index 000000000000..52c6281a6684 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5645.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV5645 Image Sensor Device Tree Bindings + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +properties: + compatible: + const: ovti,ov5645 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + clock-frequency: + description: Frequency of the xclk clock in Hz. + + vdda-supply: + description: Analog voltage supply, 2.8 volts + + vddd-supply: + description: Digital core voltage supply, 1.5 volts + + vdddo-supply: + description: Digital I/O voltage supply, 1.8 volts + + enable-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the PWDNB pin, if any. + + reset-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the RESETB pin, if any. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + items: + enum: [1, 2] + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - vdddo-supply + - vdda-supply + - vddd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov5645"; + reg = <0x3c>; + clocks = <&clks 1>; + clock-frequency = <24000000>; + vdddo-supply = <&ov5645_vdddo_1v8>; + vdda-supply = <&ov5645_vdda_2v8>; + vddd-supply = <&ov5645_vddd_1v5>; + enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5645>; + + port { + ov5645_ep: endpoint { + remote-endpoint = <&csi0_ep>; + data-lanes = <1 2>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml index 44529425ce3a..161e6d598e1c 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml @@ -105,6 +105,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c0 { #address-cells = <1>; @@ -118,7 +119,7 @@ examples: port { ov772x_0: endpoint { - bus-type = <5>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; vsync-active = <0>; hsync-active = <0>; pclk-sample = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml index bf115ab9d926..0c4654e70d46 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml @@ -16,10 +16,13 @@ description: sensor with an active array size of 1296H x 816V. It is programmable through I2C interface. The I2C client address is fixed to 0x60/0x70 as per sensor data sheet. Image data is sent through MIPI CSI-2. + OV9281 has a different lens chief ray angle. properties: compatible: - const: ovti,ov9282 + enum: + - ovti,ov9281 + - ovti,ov9282 reg: description: I2C address maxItems: 1 @@ -36,6 +39,15 @@ properties: description: Reference to the GPIO connected to the XCLR pin, if any. maxItems: 1 + avdd-supply: + description: Analog voltage supply, 2.8 volts + + dvdd-supply: + description: Digital core voltage supply, 1.2 volts + + dovdd-supply: + description: Digital I/O voltage supply, 1.8 volts + port: additionalProperties: false $ref: /schemas/graph.yaml#/$defs/port-base diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml new file mode 100644 index 000000000000..21377daae026 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX290 1/2.8-Inch CMOS Image Sensor + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: |- + The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square + Pixel for Color Cameras. It is programmable through I2C and 4-wire + interfaces. The sensor output is available via CMOS logic parallel SDR + output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 + bus is the default. No bindings have been defined for the other busses. + +properties: + compatible: + enum: + - sony,imx290 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: Input clock (37.125 MHz or 74.25 MHz) + items: + - const: xclk + + clock-frequency: + description: Frequency of the xclk clock in Hz + + vdda-supply: + description: Analog power supply (2.9V) + + vddd-supply: + description: Digital core power supply (1.2V) + + vdddo-supply: + description: Digital I/O power supply (1.8V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + anyOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - clock-frequency + - vdda-supply + - vddd-supply + - vdddo-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx290: camera-sensor@1a { + compatible = "sony,imx290"; + reg = <0x1a>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc 90>; + clock-names = "xclk"; + clock-frequency = <37125000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v8>; + vddd-supply = <&camera_vddd_1v5>; + + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + + port { + imx290_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <445500000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml index 26d1807d0bb6..60dc25ff2b9e 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml @@ -19,7 +19,9 @@ description: properties: compatible: - const: sony,imx412 + enum: + - sony,imx412 + - sony,imx577 reg: description: I2C address maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml new file mode 100644 index 000000000000..6597e1d0e65f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2022 STMicroelectronics SA. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family Device Tree Bindings + +maintainers: + - Benjamin Mugnier <benjamin.mugnier@foss.st.com> + - Sylvain Petinot <sylvain.petinot@foss.st.com> + +description: |- + STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a + quad lanes 800Mbps per lane. + Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16. + Following part number are supported + - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors. + Maximum frame rate is 75 fps. + - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors. + Maximum frame rate is 60 fps. + +properties: + compatible: + const: st,st-vgxy61 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + VCORE-supply: + description: + Sensor digital core supply. Must be 1.2 volts. + + VDDIO-supply: + description: + Sensor digital IO supply. Must be 1.8 volts. + + VANA-supply: + description: + Sensor analog supply. Must be 2.8 volts. + + reset-gpios: + description: + Reference to the GPIO connected to the reset pin, if any. + This is an active low signal to the vgxy61. + + st,strobe-gpios-polarity: + description: + Invert polarity of illuminator's lights strobe GPIOs. + These GPIOs directly drive the illuminator LEDs. + type: boolean + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + CSI lanes to use + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + remote-endpoint: true + + required: + - data-lanes + +required: + - compatible + - clocks + - VCORE-supply + - VDDIO-supply + - VANA-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + vgxy61: csi2tx@10 { + compatible = "st,st-vgxy61"; + reg = <0x10>; + clocks = <&clk_ext_camera>; + VCORE-supply = <&v1v2>; + VDDIO-supply = <&v1v8>; + VANA-supply = <&v2v8>; + reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>; + port { + ep0: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_csi2_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml new file mode 100644 index 000000000000..b8ba85a2416c --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/toshiba,tc358746.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358746 Parallel to MIPI CSI2 Bridge + +maintainers: + - Marco Felsch <kernel@pengutronix.de> + +description: |- + The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2 + stream. The direction can be either parallel-in -> csi-out or csi-in -> + parallel-out The chip is programmable trough I2C and SPI but the SPI + interface is only supported in parallel-in -> csi-out mode. + + Note that the current device tree bindings only support the + parallel-in -> csi-out path. + +properties: + compatible: + const: toshiba,tc358746 + + reg: + maxItems: 1 + + clocks: + description: + The phandle to the reference clock source. This corresponds to the + hardware pin REFCLK. + maxItems: 1 + + clock-names: + const: refclk + + "#clock-cells": + description: | + The bridge can act as clock provider for the sensor. To enable this + support #clock-cells must be specified. Attention if this feature is used + then the mclk rate must be at least: (2 * link-frequency) / 8 + `------------------´ ^ + internal PLL rate smallest possible + mclk-div + const: 0 + + clock-output-names: + description: + The clock name of the MCLK output, the default name is tc358746-mclk. + maxItems: 1 + + vddc-supply: + description: Digital core voltage supply, 1.2 volts + + vddio-supply: + description: Digital I/O voltage supply, 1.8 volts + + vddmipi-supply: + description: MIPI CSI phy voltage supply, 1.2 volts + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls the chip reset. + This corresponds to the hardware pin RESX which is physically active low. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + hsync-active: true + vsync-active: true + bus-type: + enum: [ 5, 6 ] + + required: + - hsync-active + - vsync-active + - bus-type + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + clock-noncontinuous: true + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - vddc-supply + - vddio-supply + - vddmipi-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + csi-bridge@e { + compatible = "toshiba,tc358746"; + reg = <0xe>; + + clocks = <&refclk>; + clock-names = "refclk"; + + reset-gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + + vddc-supply = <&v1_2d>; + vddio-supply = <&v1_8d>; + vddmipi-supply = <&v1_2d>; + + /* sensor mclk provider */ + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Input */ + port@0 { + reg = <0>; + tc358746_in: endpoint { + remote-endpoint = <&sensor_out>; + hsync-active = <0>; + vsync-active = <0>; + bus-type = <5>; + }; + }; + + /* Output */ + port@1 { + reg = <1>; + tc358746_out: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <216000000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml index b39b84c5f012..0e3478551e13 100644 --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml @@ -68,6 +68,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/marvell,mmp2.h> + #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/power/marvell,mmp2.h> camera@d420a000 { @@ -83,7 +84,7 @@ examples: port { camera0_0: endpoint { remote-endpoint = <&ov7670_0>; - bus-type = <5>; /* Parallel */ + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; hsync-active = <1>; /* Active high */ vsync-active = <1>; /* Active high */ pclk-sample = <0>; /* Falling */ diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml new file mode 100644 index 000000000000..71595c013dbb --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek JPEG Decoder + +maintainers: + - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com> + +description: + MediaTek JPEG Decoder is the JPEG decode hardware present in MediaTek SoCs + +properties: + compatible: + const: mediatek,mt8195-jpgdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 6 + description: + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + + dma-ranges: + maxItems: 1 + description: | + Describes the physical address space of IOMMU maps to memory. + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + +# Required child node: +patternProperties: + "^jpgdec@[0-9a-f]+$": + type: object + description: + The jpeg decoder hardware device node which should be added as subnodes to + the main jpeg node. + + properties: + compatible: + const: mediatek,mt8195-jpgdec-hw + + reg: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: jpgdec + + power-domains: + maxItems: 1 + + required: + - compatible + - reg + - iommus + - interrupts + - clocks + - clock-names + - power-domains + + additionalProperties: false + +required: + - compatible + - power-domains + - iommus + - dma-ranges + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt8195-memory-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + jpgdec-master { + compatible = "mediatek,mt8195-jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + iommus = <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + jpgdec@1a040000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */ + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGDEC>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + + jpgdec@1a050000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */ + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGDEC_C1>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + }; + + jpgdec@1b040000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */ + iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml new file mode 100644 index 000000000000..95990539f7c0 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek JPEG Encoder + +maintainers: + - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com> + +description: + MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs + +properties: + compatible: + const: mediatek,mt8195-jpgenc + + power-domains: + maxItems: 1 + + iommus: + maxItems: 4 + description: + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + + dma-ranges: + maxItems: 1 + description: | + Describes the physical address space of IOMMU maps to memory. + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + +# Required child node: +patternProperties: + "^jpgenc@[0-9a-f]+$": + type: object + description: + The jpeg encoder hardware device node which should be added as subnodes to + the main jpeg node. + + properties: + compatible: + const: mediatek,mt8195-jpgenc-hw + + reg: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: jpgenc + + power-domains: + maxItems: 1 + + required: + - compatible + - reg + - iommus + - interrupts + - clocks + - clock-names + - power-domains + + additionalProperties: false + +required: + - compatible + - power-domains + - iommus + - dma-ranges + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt8195-memory-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + jpgenc-master { + compatible = "mediatek,mt8195-jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>, + <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>; + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + jpgenc@1a030000 { + compatible = "mediatek,mt8195-jpgenc-hw"; + reg = <0 0x1a030000 0 0x10000>; + iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>, + <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>, + <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>, + <&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGENC>; + clock-names = "jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC>; + }; + + jpgenc@1b030000 { + compatible = "mediatek,mt8195-jpgenc-hw"; + reg = <0 0x1b030000 0 0x10000>; + iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>, + <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>; + clock-names = "jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml index 32aee09aea33..0f2ea8d9a10c 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml @@ -67,6 +67,12 @@ properties: power-domains: maxItems: 1 + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + required: - compatible - reg @@ -84,7 +90,9 @@ allOf: contains: enum: - mediatek,mt8183-vcodec-enc + - mediatek,mt8188-vcodec-enc - mediatek,mt8192-vcodec-enc + - mediatek,mt8195-vcodec-enc then: required: @@ -107,7 +115,9 @@ allOf: compatible: enum: - mediatek,mt8173-vcodec-enc + - mediatek,mt8188-vcodec-enc - mediatek,mt8192-vcodec-enc + - mediatek,mt8195-vcodec-enc then: properties: @@ -118,7 +128,7 @@ allOf: clock-names: items: - const: venc_sel - else: # for vp8 hw decoder + else: # for vp8 hw encoder properties: clock: items: diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml index 5e8d001492cc..cfabf360f278 100644 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml @@ -22,6 +22,7 @@ properties: - items: - enum: - mediatek,mt7623-jpgdec + - mediatek,mt8188-jpgdec - const: mediatek,mt2701-jpgdec reg: diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml index fc727300b493..c8412e8ab353 100644 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml @@ -19,6 +19,7 @@ properties: - mediatek,mt2701-jpgenc - mediatek,mt8183-jpgenc - mediatek,mt8186-jpgenc + - mediatek,mt8188-jpgenc - const: mediatek,mtk-jpgenc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml index 8b37fccab5e2..25f5f79d40ce 100644 --- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml @@ -106,6 +106,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/media/video-interfaces.h> xisc: xisc@e1408000 { compatible = "microchip,sama7g5-isc"; @@ -118,7 +119,7 @@ examples: port { xisc_in: endpoint { - bus-type = <5>; /* Parallel */ + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; remote-endpoint = <&csi2dc_out>; hsync-active = <1>; vsync-active = <1>; diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml new file mode 100644 index 000000000000..7dde7967c886 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: + The CRU image processing module is a data conversion module equipped with pixel + color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and + parallel (including ITU-R BT.656) input are provided as the image sensor interface. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-cru # RZ/G2{L,LC} + - renesas,r9a07g054-cru # RZ/V2L + - const: renesas,rzg2l-cru + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: image_conv + - const: image_conv_err + - const: axi_mst_err + + clocks: + items: + - description: CRU Main clock + - description: CRU Register access clock + - description: CRU image transfer clock + + clock-names: + items: + - const: video + - const: apb + - const: axi + + power-domains: + maxItems: 1 + + resets: + items: + - description: CRU_PRESETN reset terminal + - description: CRU_ARESETN reset terminal + + reset-names: + items: + - const: presetn + - const: aresetn + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing a parallel input source. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + hsync-active: true + vsync-active: true + bus-width: true + data-shift: true + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, describing the Image Processing module connected to the + CSI-2 receiver. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + # Device node example with CSI-2 + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cru: video@10830000 { + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; + reg = <0x10830000 0x400>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>, + <&cpg CPG_MOD R9A07G044_CRU_ACLK>; + clock-names = "video", "apb", "axi"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + cru_parallel_in: endpoint@0 { + reg = <0>; + remote-endpoint= <&ov5642>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + cru_csi_in: endpoint@0 { + reg = <0>; + remote-endpoint= <&csi_cru_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml new file mode 100644 index 000000000000..67eea2ac1d22 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: + The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L + (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction + with the Image Processing module, which provides the video capture capabilities. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-csi2 # RZ/G2{L,LC} + - renesas,r9a07g054-csi2 # RZ/V2L + - const: renesas,rzg2l-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Internal clock for connecting CRU and MIPI + - description: CRU Main clock + - description: CRU Register access clock + + clock-names: + items: + - const: system + - const: video + - const: apb + + power-domains: + maxItems: 1 + + resets: + items: + - description: CRU_PRESETN reset terminal + - description: CRU_CMN_RSTB reset terminal + + reset-names: + items: + - const: presetn + - const: cmn-rstb + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + items: + maximum: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node, Image Processing block connected to the CSI-2 receiver. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + - reset-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + csi: csi@10830400 { + compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2"; + reg = <0x10830400 0xfc00>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>; + clock-names = "system", "video", "apb"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_CMN_RSTB>; + reset-names = "presetn", "cmn-rstb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index aa54c8159d9f..8eb90c043d5d 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -10,10 +10,12 @@ Required properties: - compatible : value should be either one among the following (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs - (c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC - (d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC - (e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC - (f) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC + (c) "samsung,exynos3250-mfc", "samsung,mfc-v7" for MFC v7 + present in Exynos3250 SoC + (d) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC + (e) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC + (f) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC + (g) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC - reg : Physical base address of the IP registers and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt index 21f31fdf5543..f0ea9adad442 100644 --- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt +++ b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt @@ -76,7 +76,7 @@ i2c@138a000000 { clock-frequency = <24000000>; clocks = <&clk 0>; clock-names = "cis_extclk"; - reset-gpios = <&gpf1 3 1>; + xshutdown-gpios = <&gpf1 3 1>; standby-gpios = <&gpm0 1 1>; port { s5c73m3_ep: endpoint { diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml index 9c1262a276b5..e80fcdf280f0 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml @@ -90,7 +90,9 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/reset/stm32mp1-resets.h> + dcmi: dcmi@4c006000 { compatible = "st,stm32-dcmi"; reg = <0x4c006000 0x400>; @@ -104,7 +106,7 @@ examples: port { dcmi_0: endpoint { remote-endpoint = <&ov5640_0>; - bus-type = <5>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; hsync-active = <0>; vsync-active = <0>; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index 68c3b9871cf3..34bdad028180 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -145,9 +145,10 @@ properties: pclk-sample: $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 0, 1 ] + enum: [ 0, 1, 2 ] description: - Sample data on rising (1) or falling (0) edge of the pixel clock signal. + Sample data on falling (0), rising (1) or both (2) edges of the pixel + clock signal. sync-on-green-active: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml index 01c9acf9275d..bd23257fe021 100644 --- a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml @@ -1,26 +1,31 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml# +$id: http://devicetree.org/schemas/memory-controllers/arm,pl35x-smc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ARM PL353 Static Memory Controller (SMC) device-tree bindings +title: Arm PL35x Series Static Memory Controller (SMC) maintainers: - Miquel Raynal <miquel.raynal@bootlin.com> - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> -description: - The PL353 Static Memory Controller is a bus where you can connect two kinds +description: | + The PL35x Static Memory Controller is a bus where you can connect two kinds of memory interfaces, which are NAND and memory mapped interfaces (such as - SRAM or NOR). + SRAM or NOR) depending on the specific configuration. + + The TRM is available here: + https://documentation-service.arm.com/static/5e8e2524fd977155116a58aa # We need a select here so we don't match all nodes with 'arm,primecell' select: properties: compatible: contains: - const: arm,pl353-smc-r2p1 + enum: + - arm,pl353-smc-r2p1 + - arm,pl354 required: - compatible @@ -30,7 +35,9 @@ properties: compatible: items: - - const: arm,pl353-smc-r2p1 + - enum: + - arm,pl353-smc-r2p1 + - arm,pl354 - const: arm,primecell "#address-cells": @@ -46,30 +53,25 @@ properties: The three chip select regions are defined in 'ranges'. clocks: - items: - - description: clock for the memory device bus - - description: main clock of the SMC + minItems: 1 + maxItems: 2 clock-names: - items: - - const: memclk - - const: apb_pclk + minItems: 1 + maxItems: 2 ranges: minItems: 1 - description: | - Memory bus areas for interacting with the devices. Reflects - the memory layout with four integer values following: - <cs-number> 0 <offset> <size> - items: - - description: NAND bank 0 - - description: NOR/SRAM bank 0 - - description: NOR/SRAM bank 1 + maxItems: 8 - interrupts: true + interrupts: + minItems: 1 + items: + - description: Combined or Memory interface 0 IRQ + - description: Memory interface 1 IRQ patternProperties: - "@[0-3],[a-f0-9]+$": + "@[0-7],[a-f0-9]+$": type: object description: | The child device node represents the controller connected to the SMC @@ -87,7 +89,7 @@ patternProperties: - description: | Chip-select ID, as in the parent range property. minimum: 0 - maximum: 2 + maximum: 7 - description: | Offset of the memory region requested by the device. - description: | @@ -102,12 +104,36 @@ required: - reg - clock-names - clocks - - "#address-cells" - - "#size-cells" - - ranges additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: arm,pl354 + then: + properties: + clocks: + # According to TRM, really should be 3 clocks + maxItems: 1 + + clock-names: + const: apb_pclk + + else: + properties: + clocks: + items: + - description: clock for the memory device bus + - description: main clock of the SMC + + clock-names: + items: + - const: memclk + - const: apb_pclk + examples: - | smcc: memory-controller@e000e000 { diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml new file mode 100644 index 000000000000..34b5bd153f63 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-channel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR channel with chip/rank topology description + +description: + An LPDDR channel is a completely independent set of LPDDR pins (DQ, CA, CS, + CK, etc.) that connect one or more LPDDR chips to a host system. The main + purpose of this node is to overall LPDDR topology of the system, including the + amount of individual LPDDR chips and the ranks per chip. + +maintainers: + - Julius Werner <jwerner@chromium.org> + +properties: + compatible: + enum: + - jedec,lpddr2-channel + - jedec,lpddr3-channel + - jedec,lpddr4-channel + - jedec,lpddr5-channel + + io-width: + description: + The number of DQ pins in the channel. If this number is different + from (a multiple of) the io-width of the LPDDR chip, that means that + multiple instances of that type of chip are wired in parallel on this + channel (with the channel's DQ pins split up between the different + chips, and the CA, CS, etc. pins of the different chips all shorted + together). This means that the total physical memory controlled by a + channel is equal to the sum of the densities of each rank on the + connected LPDDR chip, times the io-width of the channel divided by + the io-width of the LPDDR chip. + enum: + - 8 + - 16 + - 32 + - 64 + - 128 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^rank@[0-9]+$": + type: object + description: + Each physical LPDDR chip may have one or more ranks. Ranks are + internal but fully independent sub-units of the chip. Each LPDDR bus + transaction on the channel targets exactly one rank, based on the + state of the CS pins. Different ranks may have different densities and + timing requirements. + required: + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: jedec,lpddr2-channel + then: + patternProperties: + "^rank@[0-9]+$": + $ref: /schemas/memory-controllers/ddr/jedec,lpddr2.yaml# + - if: + properties: + compatible: + contains: + const: jedec,lpddr3-channel + then: + patternProperties: + "^rank@[0-9]+$": + $ref: /schemas/memory-controllers/ddr/jedec,lpddr3.yaml# + - if: + properties: + compatible: + contains: + const: jedec,lpddr4-channel + then: + patternProperties: + "^rank@[0-9]+$": + $ref: /schemas/memory-controllers/ddr/jedec,lpddr4.yaml# + - if: + properties: + compatible: + contains: + const: jedec,lpddr5-channel + then: + patternProperties: + "^rank@[0-9]+$": + $ref: /schemas/memory-controllers/ddr/jedec,lpddr5.yaml# + +required: + - compatible + - io-width + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + lpddr-channel0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,lpddr3-channel"; + io-width = <32>; + + rank@0 { + compatible = "lpddr3-ff,0100", "jedec,lpddr3"; + reg = <0>; + density = <8192>; + io-width = <16>; + revision-id = <1 0>; + }; + }; + + lpddr-channel1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,lpddr4-channel"; + io-width = <32>; + + rank@0 { + compatible = "lpddr4-05,0301", "jedec,lpddr4"; + reg = <0>; + density = <4096>; + io-width = <32>; + revision-id = <3 1>; + }; + + rank@1 { + compatible = "lpddr4-05,0301", "jedec,lpddr4"; + reg = <1>; + density = <2048>; + io-width = <32>; + revision-id = <3 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml new file mode 100644 index 000000000000..30267ce70124 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for LPDDR types + +description: + Different LPDDR types generally use the same properties and only differ in the + range of legal values for each. This file defines the common parts that can be + reused for each type. Nodes using this schema should generally be nested under + an LPDDR channel node. + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + description: + Compatible strings can be either explicit vendor names and part numbers + (e.g. elpida,ECB240ABACN), or generated strings of the form + lpddrX-YY,ZZZZ where X is the LPDDR version, YY is the manufacturer ID + (from MR5) and ZZZZ is the revision ID (from MR6 and MR7). Both IDs are + formatted in lower case hexadecimal representation with leading zeroes. + The latter form can be useful when LPDDR nodes are created at runtime by + boot firmware that doesn't have access to static part number information. + + reg: + description: + The rank number of this LPDDR rank when used as a subnode to an LPDDR + channel. + minimum: 0 + maximum: 3 + + revision-id: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>). + maxItems: 2 + items: + minimum: 0 + maximum: 255 + + density: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Density in megabits of SDRAM chip. Decoded from Mode Register 8. + enum: + - 64 + - 128 + - 256 + - 512 + - 1024 + - 2048 + - 3072 + - 4096 + - 6144 + - 8192 + - 12288 + - 16384 + - 24576 + - 32768 + + io-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + IO bus width in bits of SDRAM chip. Decoded from Mode Register 8. + enum: + - 8 + - 16 + - 32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml index 9d78f140609b..a237bc259273 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml @@ -9,6 +9,9 @@ title: LPDDR2 SDRAM compliant to JEDEC JESD209-2 maintainers: - Krzysztof Kozlowski <krzk@kernel.org> +allOf: + - $ref: jedec,lpddr-props.yaml# + properties: compatible: oneOf: @@ -17,13 +20,15 @@ properties: - elpida,ECB240ABACN - elpida,B8132B2PB-6D-F - enum: - - jedec,lpddr2-s4 - - items: - - enum: + - jedec,lpddr2-nvm - jedec,lpddr2-s2 + - jedec,lpddr2-s4 - items: + - pattern: "^lpddr2-[0-9a-f]{2},[0-9a-f]{4}$" - enum: - jedec,lpddr2-nvm + - jedec,lpddr2-s2 + - jedec,lpddr2-s4 revision-id1: $ref: /schemas/types.yaml#/definitions/uint32 @@ -41,41 +46,6 @@ properties: Property is deprecated, use revision-id instead. deprecated: true - revision-id: - $ref: /schemas/types.yaml#/definitions/uint32-array - description: | - Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>). - minItems: 2 - maxItems: 2 - items: - minimum: 0 - maximum: 255 - - density: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Density in megabits of SDRAM chip. Obtained from device datasheet. - enum: - - 64 - - 128 - - 256 - - 512 - - 1024 - - 2048 - - 4096 - - 8192 - - 16384 - - 32768 - - io-width: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - IO bus width in bits of SDRAM chip. Obtained from device datasheet. - enum: - - 32 - - 16 - - 8 - tRRD-min-tck: $ref: /schemas/types.yaml#/definitions/uint32 maximum: 16 @@ -168,7 +138,7 @@ required: - density - io-width -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml index 48908a19473c..e328a1195ba6 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml @@ -9,35 +9,24 @@ title: LPDDR3 SDRAM compliant to JEDEC JESD209-3 maintainers: - Krzysztof Kozlowski <krzk@kernel.org> +allOf: + - $ref: jedec,lpddr-props.yaml# + properties: compatible: - items: - - enum: - - samsung,K3QF2F20DB - - const: jedec,lpddr3 + oneOf: + - items: + - enum: + - samsung,K3QF2F20DB + - const: jedec,lpddr3 + - items: + - pattern: "^lpddr3-[0-9a-f]{2},[0-9a-f]{4}$" + - const: jedec,lpddr3 '#address-cells': const: 1 deprecated: true - density: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Density in megabits of SDRAM chip. - enum: - - 4096 - - 8192 - - 16384 - - 32768 - - io-width: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - IO bus width in bits of SDRAM chip. - enum: - - 32 - - 16 - manufacturer-id: $ref: /schemas/types.yaml#/definitions/uint32 description: | @@ -45,15 +34,6 @@ properties: deprecated, manufacturer should be derived from the compatible. deprecated: true - revision-id: - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 2 - maxItems: 2 - items: - maximum: 255 - description: | - Revision value of SDRAM chip read from Mode Registers 6 and 7. - '#size-cells': const: 0 deprecated: true @@ -206,7 +186,7 @@ required: - density - io-width -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml new file mode 100644 index 000000000000..a078892fecee --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR4 SDRAM compliant to JEDEC JESD209-4 + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +allOf: + - $ref: jedec,lpddr-props.yaml# + +properties: + compatible: + items: + - pattern: "^lpddr4-[0-9a-f]{2},[0-9a-f]{4}$" + - const: jedec,lpddr4 + +required: + - compatible + - density + - io-width + +unevaluatedProperties: false + +examples: + - | + lpddr { + compatible = "lpddr4-ff,0100", "jedec,lpddr4"; + density = <8192>; + io-width = <16>; + revision-id = <1 0>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml new file mode 100644 index 000000000000..e441dac5f154 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR5 SDRAM compliant to JEDEC JESD209-5 + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +allOf: + - $ref: jedec,lpddr-props.yaml# + +properties: + compatible: + items: + - pattern: "^lpddr5-[0-9a-f]{2},[0-9a-f]{4}$" + - const: jedec,lpddr5 + + serial-id: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Serial IDs read from Mode Registers 47 through 54. One byte per uint32 + cell (i.e. <MR47 MR48 MR49 MR50 MR51 MR52 MR53 MR54>). + maxItems: 8 + items: + minimum: 0 + maximum: 255 + +required: + - compatible + - density + - io-width + +unevaluatedProperties: false + +examples: + - | + lpddr { + compatible = "lpddr5-01,0200", "jedec,lpddr5"; + density = <8192>; + io-width = <8>; + revision-id = <2 0>; + serial-id = <3 1 0 0 0 0 0 0>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml new file mode 100644 index 000000000000..53ae995462db --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/mc-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for a Memory Controller bus. + +description: + Many Memory Controllers need to add properties to peripheral devices. + They could be common properties like reg or they could be controller + specific like delay in clock or data lines, etc. These properties need + to be defined in the peripheral node because they are per-peripheral + and there can be multiple peripherals attached to a controller. All + those properties are listed here. The controller specific properties + should go in their own separate schema that should be referenced + from here. + +maintainers: + - Marek Vasut <marex@denx.de> + +properties: + reg: + description: Bank number, base address and size of the device. + + bank-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bank width of the device, in bytes. + enum: [1, 2, 4] + +required: + - reg + +# The controller specific properties go here. +allOf: + - $ref: st,stm32-fmc2-ebi-props.yaml# + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 645249ea21d1..30a403b1b79a 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -44,6 +44,11 @@ properties: - items: - enum: + - renesas,r8a779g0-rpc-if # R-Car V4H + - const: renesas,rcar-gen4-rpc-if # a generic R-Car gen4 device + + - items: + - enum: - renesas,r9a07g043-rpc-if # RZ/G2UL - renesas,r9a07g044-rpc-if # RZ/G2{L,LC} - renesas,r9a07g054-rpc-if # RZ/V2L diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml new file mode 100644 index 000000000000..475e4095068c --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral properties for ST FMC2 Controller + +maintainers: + - Christophe Kerello <christophe.kerello@foss.st.com> + - Marek Vasut <marex@denx.de> + +properties: + st,fmc2-ebi-cs-transaction-type: + description: | + Select one of the transactions type supported + 0: Asynchronous mode 1 SRAM/FRAM. + 1: Asynchronous mode 1 PSRAM. + 2: Asynchronous mode A SRAM/FRAM. + 3: Asynchronous mode A PSRAM. + 4: Asynchronous mode 2 NOR. + 5: Asynchronous mode B NOR. + 6: Asynchronous mode C NOR. + 7: Asynchronous mode D NOR. + 8: Synchronous read synchronous write PSRAM. + 9: Synchronous read asynchronous write PSRAM. + 10: Synchronous read synchronous write NOR. + 11: Synchronous read asynchronous write NOR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 11 + + st,fmc2-ebi-cs-cclk-enable: + description: Continuous clock enable (first bank must be configured + in synchronous mode). The FMC_CLK is generated continuously + during asynchronous and synchronous access. By default, the + FMC_CLK is only generated during synchronous access. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-mux-enable: + description: Address/Data multiplexed on databus (valid only with + NOR and PSRAM transactions type). By default, Address/Data + are not multiplexed. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-buswidth: + description: Data bus width + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16 ] + default: 16 + + st,fmc2-ebi-cs-waitpol-high: + description: Wait signal polarity (NWAIT signal active high). + By default, NWAIT is active low. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-waitcfg-enable: + description: The NWAIT signal indicates wheither the data from the + device are valid or if a wait state must be inserted when accessing + the device in synchronous mode. By default, the NWAIT signal is + active one data cycle before wait state. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-wait-enable: + description: The NWAIT signal is enabled (its level is taken into + account after the programmed latency period to insert wait states + if asserted). By default, the NWAIT signal is disabled. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-asyncwait-enable: + description: The NWAIT signal is taken into account during asynchronous + transactions. By default, the NWAIT signal is not taken into account + during asynchronous transactions. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-cpsize: + description: CRAM page size. The controller splits the burst access + when the memory page is reached. By default, no burst split when + crossing page boundary. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 128, 256, 512, 1024 ] + default: 0 + + st,fmc2-ebi-cs-byte-lane-setup-ns: + description: This property configures the byte lane setup timing + defined in nanoseconds from NBLx low to Chip Select NEx low. + + st,fmc2-ebi-cs-address-setup-ns: + description: This property defines the duration of the address setup + phase in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-address-hold-ns: + description: This property defines the duration of the address hold + phase in nanoseconds used for asynchronous multiplexed read/write + transactions. + + st,fmc2-ebi-cs-data-setup-ns: + description: This property defines the duration of the data setup phase + in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-bus-turnaround-ns: + description: This property defines the delay in nanoseconds between the + end of current read/write transaction and the next transaction. + + st,fmc2-ebi-cs-data-hold-ns: + description: This property defines the duration of the data hold phase + in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-clk-period-ns: + description: This property defines the FMC_CLK output signal period in + nanoseconds. + + st,fmc2-ebi-cs-data-latency-ns: + description: This property defines the data latency before reading or + writing the first data in nanoseconds. + + st,fmc2-ebi-cs-write-address-setup-ns: + description: This property defines the duration of the address setup + phase in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-write-address-hold-ns: + description: This property defines the duration of the address hold + phase in nanoseconds used for asynchronous multiplexed write + transactions. + + st,fmc2-ebi-cs-write-data-setup-ns: + description: This property defines the duration of the data setup + phase in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-write-bus-turnaround-ns: + description: This property defines the delay between the end of current + write transaction and the next transaction in nanoseconds. + + st,fmc2-ebi-cs-write-data-hold-ns: + description: This property defines the duration of the data hold phase + in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-max-low-pulse-ns: + description: This property defines the maximum chip select low pulse + duration in nanoseconds for synchronous transactions. When this timing + reaches 0, the controller splits the current access, toggles NE to + allow device refresh and restarts a new access. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index 6b516d3895af..d71af02b7f16 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -48,143 +48,7 @@ properties: patternProperties: "^.*@[0-4],[a-f0-9]+$": type: object - - properties: - reg: - description: Bank number, base address and size of the device. - - st,fmc2-ebi-cs-transaction-type: - description: | - Select one of the transactions type supported - 0: Asynchronous mode 1 SRAM/FRAM. - 1: Asynchronous mode 1 PSRAM. - 2: Asynchronous mode A SRAM/FRAM. - 3: Asynchronous mode A PSRAM. - 4: Asynchronous mode 2 NOR. - 5: Asynchronous mode B NOR. - 6: Asynchronous mode C NOR. - 7: Asynchronous mode D NOR. - 8: Synchronous read synchronous write PSRAM. - 9: Synchronous read asynchronous write PSRAM. - 10: Synchronous read synchronous write NOR. - 11: Synchronous read asynchronous write NOR. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 11 - - st,fmc2-ebi-cs-cclk-enable: - description: Continuous clock enable (first bank must be configured - in synchronous mode). The FMC_CLK is generated continuously - during asynchronous and synchronous access. By default, the - FMC_CLK is only generated during synchronous access. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-mux-enable: - description: Address/Data multiplexed on databus (valid only with - NOR and PSRAM transactions type). By default, Address/Data - are not multiplexed. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-buswidth: - description: Data bus width - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 8, 16 ] - default: 16 - - st,fmc2-ebi-cs-waitpol-high: - description: Wait signal polarity (NWAIT signal active high). - By default, NWAIT is active low. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-waitcfg-enable: - description: The NWAIT signal indicates wheither the data from the - device are valid or if a wait state must be inserted when accessing - the device in synchronous mode. By default, the NWAIT signal is - active one data cycle before wait state. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-wait-enable: - description: The NWAIT signal is enabled (its level is taken into - account after the programmed latency period to insert wait states - if asserted). By default, the NWAIT signal is disabled. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-asyncwait-enable: - description: The NWAIT signal is taken into account during asynchronous - transactions. By default, the NWAIT signal is not taken into account - during asynchronous transactions. - $ref: /schemas/types.yaml#/definitions/flag - - st,fmc2-ebi-cs-cpsize: - description: CRAM page size. The controller splits the burst access - when the memory page is reached. By default, no burst split when - crossing page boundary. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 0, 128, 256, 512, 1024 ] - default: 0 - - st,fmc2-ebi-cs-byte-lane-setup-ns: - description: This property configures the byte lane setup timing - defined in nanoseconds from NBLx low to Chip Select NEx low. - - st,fmc2-ebi-cs-address-setup-ns: - description: This property defines the duration of the address setup - phase in nanoseconds used for asynchronous read/write transactions. - - st,fmc2-ebi-cs-address-hold-ns: - description: This property defines the duration of the address hold - phase in nanoseconds used for asynchronous multiplexed read/write - transactions. - - st,fmc2-ebi-cs-data-setup-ns: - description: This property defines the duration of the data setup phase - in nanoseconds used for asynchronous read/write transactions. - - st,fmc2-ebi-cs-bus-turnaround-ns: - description: This property defines the delay in nanoseconds between the - end of current read/write transaction and the next transaction. - - st,fmc2-ebi-cs-data-hold-ns: - description: This property defines the duration of the data hold phase - in nanoseconds used for asynchronous read/write transactions. - - st,fmc2-ebi-cs-clk-period-ns: - description: This property defines the FMC_CLK output signal period in - nanoseconds. - - st,fmc2-ebi-cs-data-latency-ns: - description: This property defines the data latency before reading or - writing the first data in nanoseconds. - - st,fmc2_ebi-cs-write-address-setup-ns: - description: This property defines the duration of the address setup - phase in nanoseconds used for asynchronous write transactions. - - st,fmc2-ebi-cs-write-address-hold-ns: - description: This property defines the duration of the address hold - phase in nanoseconds used for asynchronous multiplexed write - transactions. - - st,fmc2-ebi-cs-write-data-setup-ns: - description: This property defines the duration of the data setup - phase in nanoseconds used for asynchronous write transactions. - - st,fmc2-ebi-cs-write-bus-turnaround-ns: - description: This property defines the delay between the end of current - write transaction and the next transaction in nanoseconds. - - st,fmc2-ebi-cs-write-data-hold-ns: - description: This property defines the duration of the data hold phase - in nanoseconds used for asynchronous write transactions. - - st,fmc2-ebi-cs-max-low-pulse-ns: - description: This property defines the maximum chip select low pulse - duration in nanoseconds for synchronous transactions. When this timing - reaches 0, the controller splits the current access, toggles NE to - allow device refresh and restarts a new access. - - required: - - reg + $ref: mc-peripheral-props.yaml# required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml index 6e3995bb1630..4a257fac577e 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml @@ -230,6 +230,13 @@ properties: Wait-pin used by client. Must be less than "gpmc,num-waitpins". $ref: /schemas/types.yaml#/definitions/uint32 + ti,wait-pin-polarity: + description: | + Set the desired polarity for the selected wait pin. + 0 for active low, 1 for active high. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + gpmc,wait-on-read: description: Enables wait monitoring on reads. type: boolean diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index 04962bb29576..3d5efa5578d1 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -20,19 +20,21 @@ properties: compatible: oneOf: - description: - For implementations of the EC is connected through I2C. + For implementations of the EC connected through I2C. const: google,cros-ec-i2c - description: - For implementations of the EC is connected through SPI. + For implementations of the EC connected through SPI. const: google,cros-ec-spi - description: - For implementations of the EC is connected through RPMSG. + For implementations of the FPMCU connected through SPI. + items: + - const: google,cros-ec-fp + - const: google,cros-ec-spi + - description: + For implementations of the EC connected through RPMSG. const: google,cros-ec-rpmsg - controller-data: - description: - SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml - type: object + controller-data: true google,cros-ec-spi-pre-delay: description: @@ -62,8 +64,7 @@ properties: the SCP. $ref: "/schemas/types.yaml#/definitions/string" - spi-max-frequency: - description: Maximum SPI frequency of the device in Hz. + spi-max-frequency: true reg: maxItems: 1 @@ -71,6 +72,15 @@ properties: interrupts: maxItems: 1 + reset-gpios: + maxItems: 1 + + boot0-gpios: + maxItems: 1 + description: Assert for bootloader mode. + + vdd-supply: true + wakeup-source: description: Button can wake-up the system. @@ -155,18 +165,67 @@ allOf: - if: properties: compatible: - contains: - enum: - - google,cros-ec-i2c - - google,cros-ec-rpmsg + not: + contains: + const: google,cros-ec-spi then: properties: + controller-data: false google,cros-ec-spi-pre-delay: false google,cros-ec-spi-msg-delay: false spi-max-frequency: false else: $ref: /schemas/spi/spi-peripheral-props.yaml + - if: + properties: + compatible: + not: + contains: + const: google,cros-ec-rpmsg + then: + properties: + mediatek,rpmsg-name: false + + required: + - reg + - interrupts + + - if: + properties: + compatible: + contains: + const: google,cros-ec-fp + then: + properties: + '#address-cells': false + '#size-cells': false + typec: false + ec-pwm: false + kbd-led-backlight: false + keyboard-controller: false + proximity: false + codecs: false + cbas: false + + patternProperties: + "^i2c-tunnel[0-9]*$": false + "^regulator@[0-9]+$": false + "^extcon[0-9]*$": false + + # Using additionalProperties: false here and + # listing true properties doesn't work + + required: + - reset-gpios + - boot0-gpios + - vdd-supply + else: + properties: + reset-gpios: false + boot0-gpios: false + vdd-supply: false + additionalProperties: false examples: @@ -222,4 +281,22 @@ examples: compatible = "google,cros-ec-rpmsg"; }; }; + + # Example for FPMCU + - | + spi0 { + #address-cells = <0x1>; + #size-cells = <0x0>; + + ec@0 { + compatible = "google,cros-ec-fp", "google,cros-ec-spi"; + reg = <0x0>; + interrupt-parent = <&gpio_controller>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <3000000>; + reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>; + boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>; + vdd-supply = <&pp3300_fp_mcu>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml index b0a0f0d3d9d4..4181174fcf58 100644 --- a/Documentation/devicetree/bindings/mfd/max77650.yaml +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -100,14 +100,12 @@ examples: compatible = "maxim,max77650-regulator"; max77650_ldo: regulator-ldo { - regulator-compatible = "ldo"; regulator-name = "max77650-ldo"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <2937500>; }; max77650_sbb0: regulator-sbb0 { - regulator-compatible = "sbb0"; regulator-name = "max77650-sbb0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1587500>; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml index 28eee02441ee..fb65abf30d57 100644 --- a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml @@ -83,7 +83,6 @@ examples: richtek,vinovp-microvolt = <14500000>; otg_vbus_regulator: usb-otg-vbus-regulator { - regulator-compatible = "usb-otg-vbus"; regulator-name = "usb-otg-vbus"; regulator-min-microvolt = <4425000>; regulator-max-microvolt = <5825000>; @@ -145,7 +144,6 @@ examples: compatible = "mediatek,mt6360-regulator"; LDO_VIN3-supply = <&BUCK2>; buck1 { - regulator-compatible = "BUCK1"; regulator-name = "mt6360,buck1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -154,7 +152,6 @@ examples: MT6360_OPMODE_ULP>; }; BUCK2: buck2 { - regulator-compatible = "BUCK2"; regulator-name = "mt6360,buck2"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -163,7 +160,6 @@ examples: MT6360_OPMODE_ULP>; }; ldo6 { - regulator-compatible = "LDO6"; regulator-name = "mt6360,ldo6"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; @@ -171,7 +167,6 @@ examples: MT6360_OPMODE_LP>; }; ldo7 { - regulator-compatible = "LDO7"; regulator-name = "mt6360,ldo7"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; @@ -179,7 +174,6 @@ examples: MT6360_OPMODE_LP>; }; ldo1 { - regulator-compatible = "LDO1"; regulator-name = "mt6360,ldo1"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -187,7 +181,6 @@ examples: MT6360_OPMODE_LP>; }; ldo2 { - regulator-compatible = "LDO2"; regulator-name = "mt6360,ldo2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -195,7 +188,6 @@ examples: MT6360_OPMODE_LP>; }; ldo3 { - regulator-compatible = "LDO3"; regulator-name = "mt6360,ldo3"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -203,7 +195,6 @@ examples: MT6360_OPMODE_LP>; }; ldo5 { - regulator-compatible = "LDO5"; regulator-name = "mt6360,ldo5"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3600000>; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 6a3e3ede1ede..a5edab6f2e40 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -33,6 +33,7 @@ properties: compatible: items: - enum: + - qcom,pm6125 - qcom,pm6150 - qcom,pm6150l - qcom,pm6350 diff --git a/Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt b/Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt deleted file mode 100644 index 8ef71b4085ca..000000000000 --- a/Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt +++ /dev/null @@ -1,8 +0,0 @@ -* Broadcom MIPS (BMIPS) CPUs - -Required properties: -- compatible: "brcm,bmips3300", "brcm,bmips4350", "brcm,bmips4380", - "brcm,bmips5000" - -- mips-hpt-frequency: This is common to all CPUs in the system so it lives - under the "cpus" node. diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.yaml b/Documentation/devicetree/bindings/mips/brcm/soc.yaml new file mode 100644 index 000000000000..975945ca2888 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/brcm/soc.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mips/brcm/soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom cable/DSL/settop platforms + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: | + Boards Broadcom cable/DSL/settop SoC shall have the following properties. + The experimental -viper variants are for running Linux on the 3384's + BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor. + +properties: + $nodename: + const: '/' + + compatible: + enum: + - brcm,bcm3368 + - brcm,bcm3384 + - brcm,bcm33843 + - brcm,bcm3384-viper + - brcm,bcm33843-viper + - brcm,bcm6328 + - brcm,bcm6358 + - brcm,bcm6362 + - brcm,bcm6368 + - brcm,bcm63168 + - brcm,bcm63268 + - brcm,bcm7125 + - brcm,bcm7346 + - brcm,bcm7358 + - brcm,bcm7360 + - brcm,bcm7362 + - brcm,bcm7420 + - brcm,bcm7425 + + cpus: + type: object + additionalProperties: false + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + mips-hpt-frequency: + description: MIPS counter high precision timer frequency. + This is common to all CPUs in the system so it lives + under the "cpus" node. + $ref: /schemas/types.yaml#/definitions/uint32 + + patternProperties: + "^cpu@[0-9]$": + type: object + $ref: /schemas/mips/cpus.yaml# + unevaluatedProperties: false + + required: + - mips-hpt-frequency + +additionalProperties: true + +examples: + - | + / { + compatible = "brcm,bcm3368"; + #address-cells = <1>; + #size-cells = <1>; + model = "Broadcom 3368"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <150000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mips/cpus.yaml b/Documentation/devicetree/bindings/mips/cpus.yaml new file mode 100644 index 000000000000..e991f4c6668d --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cpus.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mips/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPS CPUs bindings + +maintainers: + - Thomas Bogendoerfer <tsbogend@alpha.franken.de> + - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> + +description: | + The device tree allows to describe the layout of CPUs in a system through + the "cpus" node, which in turn contains a number of subnodes (ie "cpu") + defining properties for every CPU. + +properties: + compatible: + enum: + - brcm,bmips3300 + - brcm,bmips4350 + - brcm,bmips4380 + - brcm,bmips5000 + - brcm,bmips5200 + - ingenic,xburst-mxu1.0 + - ingenic,xburst-fpu1.0-mxu1.1 + - ingenic,xburst-fpu2.0-mxu2.0 + - ingenic,xburst2-fpu2.1-mxu2.1-smt + - loongson,gs264 + - mips,m14Kc + - mips,mips4Kc + - mips,mips4KEc + - mips,mips24Kc + - mips,mips24KEc + - mips,mips74Kc + - mips,mips1004Kc + - mti,interaptiv + - mti,mips24KEc + - mti,mips14KEc + - mti,mips14Kc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + device_type: true + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ingenic,xburst-mxu1.0 + - ingenic,xburst-fpu1.0-mxu1.1 + - ingenic,xburst-fpu2.0-mxu2.0 + - ingenic,xburst2-fpu2.1-mxu2.1-smt + then: + required: + - device_type + - clocks + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + compatible = "mips,mips1004Kc"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "mips,mips1004Kc"; + device_type = "cpu"; + reg = <1>; + }; + }; + + - | + // Example 2 (Ingenic CPU) + #include <dt-bindings/clock/ingenic,jz4780-cgu.h> + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "ingenic,xburst-fpu1.0-mxu1.1"; + device_type = "cpu"; + reg = <0>; + + clocks = <&cgu JZ4780_CLK_CPU>; + }; + + cpu@1 { + compatible = "ingenic,xburst-fpu1.0-mxu1.1"; + device_type = "cpu"; + reg = <1>; + + clocks = <&cgu JZ4780_CLK_CORE1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml deleted file mode 100644 index b7e7fa715437..000000000000 --- a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml +++ /dev/null @@ -1,69 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/mips/ingenic/ingenic,cpu.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Bindings for Ingenic XBurst family CPUs - -maintainers: - - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> - -description: - Ingenic XBurst family CPUs shall have the following properties. - -properties: - compatible: - oneOf: - - - description: Ingenic XBurst®1 CPU Cores - enum: - - ingenic,xburst-mxu1.0 - - ingenic,xburst-fpu1.0-mxu1.1 - - ingenic,xburst-fpu2.0-mxu2.0 - - - description: Ingenic XBurst®2 CPU Cores - enum: - - ingenic,xburst2-fpu2.1-mxu2.1-smt - - reg: - maxItems: 1 - - clocks: - maxItems: 1 - - device_type: true - -required: - - device_type - - compatible - - reg - - clocks - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/ingenic,jz4780-cgu.h> - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "ingenic,xburst-fpu1.0-mxu1.1"; - reg = <0>; - - clocks = <&cgu JZ4780_CLK_CPU>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "ingenic,xburst-fpu1.0-mxu1.1"; - reg = <1>; - - clocks = <&cgu JZ4780_CLK_CORE1>; - }; - }; -... diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 29339d0196ec..0e7833478869 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -75,6 +75,10 @@ properties: - const: fsl,imx8qxp-usdhc - const: fsl,imx7d-usdhc deprecated: true + - items: + - enum: + - fsl,imxrt1170-usdhc + - const: fsl,imxrt1050-usdhc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 4741864da48e..e7ec0c59bca6 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -14,9 +14,6 @@ maintainers: - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: enum: - allwinner,sun4i-a10-nand @@ -49,12 +46,8 @@ properties: dma-names: const: rxtx - pinctrl-names: true - patternProperties: - "^pinctrl-[0-9]+$": true - - "^nand@[a-f0-9]+$": + "^nand@[a-f0-9]$": type: object properties: reg: @@ -91,6 +84,29 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun6i-rtc.h> + #include <dt-bindings/clock/sun8i-a23-a33-ccu.h> + #include <dt-bindings/reset/sun8i-a23-a33-ccu.h> + + nand-controller@1c03000 { + compatible = "allwinner,sun8i-a23-nand-controller"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + dmas = <&dma 5>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; + #address-cells = <1>; + #size-cells = <0>; + }; ... diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml index f013fb976d95..d028269cdbaa 100644 --- a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml @@ -35,9 +35,6 @@ properties: interrupts: maxItems: 1 - "#address-cells": true - "#size-cells": true - required: - compatible - reg @@ -45,7 +42,7 @@ required: - clock-names - interrupts -additionalProperties: true +unevaluatedProperties: true examples: - | diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml index 023f3ef0fa13..e552875040e2 100644 --- a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml +++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml @@ -34,20 +34,20 @@ unevaluatedProperties: false examples: - | smcc: memory-controller@e000e000 { - compatible = "arm,pl353-smc-r2p1", "arm,primecell"; - reg = <0xe000e000 0x0001000>; - clock-names = "memclk", "apb_pclk"; - clocks = <&clkc 11>, <&clkc 44>; - ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */ - 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */ - 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */ - #address-cells = <2>; - #size-cells = <1>; - - nfc0: nand-controller@0,0 { - compatible = "arm,pl353-nand-r2p1"; - reg = <0 0 0x1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; + reg = <0xe000e000 0x0001000>; + clock-names = "memclk", "apb_pclk"; + clocks = <&clkc 11>, <&clkc 44>; + ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */ + 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */ + 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */ + #address-cells = <2>; + #size-cells = <1>; + + nfc0: nand-controller@0,0 { + compatible = "arm,pl353-nand-r2p1"; + reg = <0 0 0x1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index 3aa297c97ab6..50645828ac20 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -45,10 +45,8 @@ Optional properties: - atmel,rb: an integer identifying the native Ready/Busy pin. Only meaningful on sama5 SoCs. -All generic properties described in -Documentation/devicetree/bindings/mtd/{common,nand}.txt also apply to the NAND -device node, and NAND partitions should be defined under the NAND node as -described in Documentation/devicetree/bindings/mtd/partition.txt. +All generic properties are described in the generic yaml files under +Documentation/devicetree/bindings/mtd/. * ECC engine (PMECC) bindings: diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml index dd5a64969e37..1571024aa119 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -86,15 +86,15 @@ properties: minItems: 1 items: - description: NAND CTLRDY interrupt - - description: FLASH_DMA_DONE if flash DMA is available - - description: FLASH_EDU_DONE if EDU is available + - description: FLASH_DMA_DONE (if flash DMA is available) or FLASH_EDU_DONE (if EDU is available) interrupt-names: minItems: 1 items: - const: nand_ctlrdy - - const: flash_dma_done - - const: flash_edu_done + - enum: + - flash_dma_done + - flash_edu_done clocks: maxItems: 1 @@ -173,6 +173,13 @@ allOf: - const: nand - const: iproc-idm - const: iproc-ext + - if: + properties: + interrupts: + minItems: 2 + then: + required: + - interrupt-names unevaluatedProperties: false @@ -184,51 +191,52 @@ required: examples: - | nand-controller@f0442800 { - compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand"; - reg = <0xf0442800 0x600>, - <0xf0443000 0x100>; - reg-names = "nand", "flash-dma"; - interrupt-parent = <&hif_intr2_intc>; - interrupts = <24>, <4>; + compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand"; + reg = <0xf0442800 0x600>, + <0xf0443000 0x100>; + reg-names = "nand", "flash-dma"; + interrupt-parent = <&hif_intr2_intc>; + interrupts = <24>, <4>; + interrupt-names = "nand_ctlrdy", "flash_dma_done"; + + #address-cells = <1>; + #size-cells = <0>; + + nand@1 { + compatible = "brcm,nandcs"; + reg = <1>; // Chip select 1 + nand-on-flash-bbt; + nand-ecc-strength = <12>; + nand-ecc-step-size = <512>; #address-cells = <1>; - #size-cells = <0>; - - nand@1 { - compatible = "brcm,nandcs"; - reg = <1>; // Chip select 1 - nand-on-flash-bbt; - nand-ecc-strength = <12>; - nand-ecc-step-size = <512>; - - #address-cells = <1>; - #size-cells = <1>; - }; + #size-cells = <1>; + }; }; - | nand-controller@10000200 { - compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368", - "brcm,brcmnand-v4.0", "brcm,brcmnand"; - reg = <0x10000200 0x180>, - <0x100000b0 0x10>, - <0x10000600 0x200>; - reg-names = "nand", "nand-int-base", "nand-cache"; - interrupt-parent = <&periph_intc>; - interrupts = <50>; - clocks = <&periph_clk 20>; - clock-names = "nand"; + compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368", + "brcm,brcmnand-v4.0", "brcm,brcmnand"; + reg = <0x10000200 0x180>, + <0x100000b0 0x10>, + <0x10000600 0x200>; + reg-names = "nand", "nand-int-base", "nand-cache"; + interrupt-parent = <&periph_intc>; + interrupts = <50>; + clocks = <&periph_clk 20>; + clock-names = "nand"; + + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <1>; + nand-ecc-step-size = <512>; #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-on-flash-bbt; - nand-ecc-strength = <1>; - nand-ecc-step-size = <512>; - - #address-cells = <1>; - #size-cells = <1>; - }; + #size-cells = <1>; + }; }; diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml index 1307ed7e7fc6..0be83ad42970 100644 --- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -145,6 +145,6 @@ examples: #size-cells = <0>; nand@0 { - reg = <0>; + reg = <0>; }; }; diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml index 8c272c842bfd..a811a512ecc5 100644 --- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml @@ -32,9 +32,9 @@ properties: partitions: type: object + deprecated: true description: Node containing description of fixed partitions. - See Documentation/devicetree/bindings/mtd/partition.txt patternProperties: "^nand@[a-f0-9]$": @@ -58,78 +58,78 @@ examples: - | #include <dt-bindings/clock/ingenic,jz4780-cgu.h> memory-controller@13410000 { - compatible = "ingenic,jz4780-nemc"; - reg = <0x13410000 0x10000>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <1 0 0x1b000000 0x1000000>, - <2 0 0x1a000000 0x1000000>, - <3 0 0x19000000 0x1000000>, - <4 0 0x18000000 0x1000000>, - <5 0 0x17000000 0x1000000>, - <6 0 0x16000000 0x1000000>; - - clocks = <&cgu JZ4780_CLK_NEMC>; - - nand-controller@1 { - compatible = "ingenic,jz4780-nand"; - reg = <1 0 0x1000000>; - - #address-cells = <1>; - #size-cells = <0>; - - ecc-engine = <&bch>; - - ingenic,nemc-tAS = <10>; - ingenic,nemc-tAH = <5>; - ingenic,nemc-tBP = <10>; - ingenic,nemc-tAW = <15>; - ingenic,nemc-tSTRV = <100>; - - pinctrl-names = "default"; - pinctrl-0 = <&pins_nemc>; - - nand@1 { - reg = <1>; - - nand-ecc-step-size = <1024>; - nand-ecc-strength = <24>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - - pinctrl-names = "default"; - pinctrl-0 = <&pins_nemc_cs1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <2>; - #size-cells = <2>; - - partition@0 { - label = "u-boot-spl"; - reg = <0x0 0x0 0x0 0x800000>; + compatible = "ingenic,jz4780-nemc"; + reg = <0x13410000 0x10000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 0x1b000000 0x1000000>, + <2 0 0x1a000000 0x1000000>, + <3 0 0x19000000 0x1000000>, + <4 0 0x18000000 0x1000000>, + <5 0 0x17000000 0x1000000>, + <6 0 0x16000000 0x1000000>; + + clocks = <&cgu JZ4780_CLK_NEMC>; + + nand-controller@1 { + compatible = "ingenic,jz4780-nand"; + reg = <1 0 0x1000000>; + + #address-cells = <1>; + #size-cells = <0>; + + ecc-engine = <&bch>; + + ingenic,nemc-tAS = <10>; + ingenic,nemc-tAH = <5>; + ingenic,nemc-tBP = <10>; + ingenic,nemc-tAW = <15>; + ingenic,nemc-tSTRV = <100>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + + nand@1 { + reg = <1>; + + nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <2>; + #size-cells = <2>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x0 0x0 0x800000>; + }; + + partition@800000 { + label = "u-boot"; + reg = <0x0 0x800000 0x0 0x200000>; + }; + + partition@a00000 { + label = "u-boot-env"; + reg = <0x0 0xa00000 0x0 0x200000>; + }; + + partition@c00000 { + label = "boot"; + reg = <0x0 0xc00000 0x0 0x4000000>; + }; + + partition@4c00000 { + label = "system"; + reg = <0x0 0x4c00000 0x1 0xfb400000>; + }; + }; }; - - partition@800000 { - label = "u-boot"; - reg = <0x0 0x800000 0x0 0x200000>; - }; - - partition@a00000 { - label = "u-boot-env"; - reg = <0x0 0xa00000 0x0 0x200000>; - }; - - partition@c00000 { - label = "boot"; - reg = <0x0 0xc00000 0x0 0x4000000>; - }; - - partition@4c00000 { - label = "system"; - reg = <0x0 0x4c00000 0x1 0xfb400000>; - }; - }; }; - }; }; diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml index 741c66ee06c3..8c62c7d3d0cd 100644 --- a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml +++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml @@ -39,14 +39,8 @@ properties: - const: tx - const: rx - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - patternProperties: - "^nand@[a-f0-9]+$": + "^nand@[a-f0-9]$": type: object properties: reg: @@ -67,33 +61,31 @@ required: - clocks - dmas - dma-names - - "#address-cells" - - "#size-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | nand-controller@e0f00000 { - compatible = "intel,lgm-ebunand"; - reg = <0xe0f00000 0x100>, - <0xe1000000 0x300>, - <0xe1400000 0x8000>, - <0xe1c00000 0x1000>, - <0x17400000 0x4>, - <0x17c00000 0x4>; - reg-names = "ebunand", "hsnand", "nand_cs0", "nand_cs1", - "addr_sel0", "addr_sel1"; - clocks = <&cgu0 125>; - dmas = <&dma0 8>, <&dma0 9>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; - nand-ecc-mode = "hw"; - }; + compatible = "intel,lgm-ebunand"; + reg = <0xe0f00000 0x100>, + <0xe1000000 0x300>, + <0xe1400000 0x8000>, + <0xe1c00000 0x1000>, + <0x17400000 0x4>, + <0x17c00000 0x4>; + reg-names = "ebunand", "hsnand", "nand_cs0", "nand_cs1", + "addr_sel0", "addr_sel1"; + clocks = <&cgu0 125>; + dmas = <&dma0 8>, <&dma0 9>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-ecc-mode = "hw"; + }; }; ... diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml index 7149784a36ac..3fe981b14e2c 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml @@ -70,24 +70,17 @@ properties: be used on such systems, to denote the absence of a reliable reset mechanism. - partitions: - type: object - - '#address-cells': true - '#size-cells': true - -patternProperties: - # Note: use 'partitions' node for new users - '^partition@': - type: object - - "^otp(-[0-9]+)?$": - type: object + reset-gpios: + description: + A GPIO line connected to the RESET (active low) signal of the device. + If "broken-flash-reset" is present then having this property does not + make any difference. unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -97,6 +90,7 @@ examples: reg = <0>; spi-max-frequency = <40000000>; m25p,fast-read; + reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; }; ... diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt index 6d60bc3063f5..64c06aa05ac7 100644 --- a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt +++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt @@ -19,7 +19,7 @@ accuracy:) - nxp,wr_low: WR_LOW Optional subnodes: -- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt +- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml Example: diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt index d94edc0fc554..39f17630a301 100644 --- a/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt +++ b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt @@ -20,7 +20,7 @@ clock speed:) - nxp,rsetup: Read setup time (R_SETUP) Optional subnodes: -- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt +- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml Example: diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml index 8cc2a7ceb5fb..ea9450fe7c9f 100644 --- a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml @@ -34,13 +34,13 @@ unevaluatedProperties: false examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; - - eeram@0 { - compatible = "microchip,48l640"; - reg = <0>; - spi-max-frequency = <20000000>; - }; + #address-cells = <1>; + #size-cells = <0>; + + eeram@0 { + compatible = "microchip,48l640"; + reg = <0>; + spi-max-frequency = <20000000>; + }; }; ... diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml index 82eb4e0f453b..5df94953c34e 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml @@ -13,6 +13,9 @@ description: | Flash chips (Memory Technology Devices) are often used for solid state file systems on embedded devices. +allOf: + - $ref: "mtd.yaml#" + properties: compatible: oneOf: @@ -121,10 +124,6 @@ properties: big-endian: true little-endian: true -patternProperties: - '@[0-9a-f]+$': - $ref: partitions/partition.yaml - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index 3498e485679b..78da129e9985 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -12,7 +12,7 @@ maintainers: properties: $nodename: - pattern: "^flash(@.*)?$" + pattern: "^(flash|.*sram)(@.*)?$" label: description: @@ -21,9 +21,28 @@ properties: based name) in order to ease flash device identification and/or describe what they are used for. + '#address-cells': + deprecated: true + + '#size-cells': + deprecated: true + + partitions: + $ref: /schemas/mtd/partitions/partitions.yaml + + required: + - compatible + patternProperties: + "@[0-9a-f]+$": + $ref: partitions/partition.yaml + deprecated: true + + "^partition@[0-9a-f]+": + $ref: partitions/partition.yaml + deprecated: true + "^otp(-[0-9]+)?$": - type: object $ref: ../nvmem/nvmem.yaml# description: | @@ -40,6 +59,7 @@ patternProperties: required: - compatible +# This is a generic file other binding inherit from additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index 4d3ec5e4ff8a..839ea2f93d04 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -131,7 +131,7 @@ Example: }; NAND chip optional subnodes: -- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt +- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml Example: nand@0 { diff --git a/Documentation/devicetree/bindings/mtd/nand-chip.yaml b/Documentation/devicetree/bindings/mtd/nand-chip.yaml index 97ac3a3fbb52..6e2dc025d694 100644 --- a/Documentation/devicetree/bindings/mtd/nand-chip.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-chip.yaml @@ -9,6 +9,9 @@ title: NAND Chip and NAND Controller Generic Binding maintainers: - Miquel Raynal <miquel.raynal@bootlin.com> +allOf: + - $ref: "mtd.yaml#" + description: | This file covers the generic description of a NAND chip. It implies that the bus interface should not be taken into account: both raw NAND devices and @@ -67,4 +70,5 @@ properties: required: - reg +# This file can be referenced by more specific devices (like spi-nands) additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index 359a015d4e5a..220aa2c8c0b5 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -51,7 +51,6 @@ properties: patternProperties: "^nand@[a-f0-9]$": - type: object $ref: "nand-chip.yaml#" properties: @@ -130,6 +129,7 @@ required: - "#address-cells" - "#size-cells" +# This is a generic file other binding inherit from and extend additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt deleted file mode 100644 index ead90e8274d6..000000000000 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ /dev/null @@ -1,33 +0,0 @@ -Flash partitions in device tree -=============================== - -Flash devices can be partitioned into one or more functional ranges (e.g. "boot -code", "nvram", "kernel"). - -Different devices may be partitioned in a different ways. Some may use a fixed -flash layout set at production time. Some may use on-flash table that describes -the geometry and naming/purpose of each functional region. It is also possible -to see these methods mixed. - -To assist system software in locating partitions, we allow describing which -method is used for a given flash device. To describe the method there should be -a subnode of the flash device that is named 'partitions'. It must have a -'compatible' property, which is used to identify the method to use. - -When a single partition is represented with a DT node (it depends on a used -format) it may also be described using above rules ('compatible' and optionally -some extra properties / subnodes). It allows describing more complex, -hierarchical (multi-level) layouts and should be used if there is some -significant relation between partitions or some partition internally uses -another partitioning method. - -Available bindings are listed in the "partitions" subdirectory. - - -Deprecated: partitions defined in flash node -============================================ - -For backwards compatibility partitions as direct subnodes of the flash device are -supported. This use is discouraged. -NOTE: also for backwards compatibility, direct subnodes that have a compatible -string are not considered partitions, as they may be used for other bindings. diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml index 76c88027b6d2..97618847ee35 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml @@ -9,6 +9,8 @@ title: ARM Firmware Suite (AFS) Partitions maintainers: - Linus Walleij <linus.walleij@linaro.org> +select: false + description: | The ARM Firmware Suite is a flash partitioning system found on the ARM reference designs: Integrator AP, Integrator CP, Versatile AB, diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml index 7b113e5e3421..5bbb1c01ddee 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml @@ -17,6 +17,8 @@ description: | maintainers: - Rafał Miłecki <rafal@milecki.pl> +select: false + properties: compatible: const: brcm,bcm4908-partitions diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml index 3484e06d6bcb..939e7b50db22 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml @@ -35,6 +35,8 @@ description: | maintainers: - Rafał Miłecki <rafal@milecki.pl> +select: false + properties: compatible: const: brcm,bcm947xx-cfe-partitions diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml index ad3ccd250802..331e564f29dc 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml @@ -31,24 +31,17 @@ properties: patternProperties: "@[0-9a-f]+$": - allOf: - - $ref: "partition.yaml#" - - if: - properties: - compatible: - contains: - const: sercomm,sc-partitions - then: - properties: - sercomm,scpart-id: - description: Partition id in Sercomm partition map. Mtd - parser uses this id to find a record in the partition map - containing offset and size of the current partition. The - values from partition map overrides partition offset and - size defined in reg property of the dts. Frequently these - values are the same, but may differ if device has bad - eraseblocks on a flash. - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: partition.yaml# + + properties: + sercomm,scpart-id: + description: Partition id in Sercomm partition map. Mtd parser + uses this id to find a record in the partition map containing + offset and size of the current partition. The values from + partition map overrides partition offset and size defined in + reg property of the dts. Frequently these values are the same, + but may differ if device has bad eraseblocks on a flash. + $ref: /schemas/types.yaml#/definitions/uint32 required: - "#address-cells" @@ -84,6 +77,7 @@ examples: partition@0 { label = "filesystem"; reg = <0x00000000 0x1 0x00000000>; + linux,rootfs; }; }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml index 99249cdfbfb3..213858f60375 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml @@ -18,6 +18,8 @@ description: | maintainers: - Rafał Miłecki <rafal@milecki.pl> +select: false + properties: compatible: const: linksys,ns-partitions diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml index 5cdd2efa9132..5474d63268dc 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml @@ -17,6 +17,7 @@ maintainers: - Ansuel Smith <ansuelsmth@gmail.com> allOf: + - $ref: /schemas/mtd/partitions/partition.yaml# - $ref: /schemas/nvmem/nvmem.yaml# properties: @@ -26,7 +27,7 @@ properties: required: - compatible -additionalProperties: true +unevaluatedProperties: false examples: - | @@ -84,7 +85,6 @@ examples: compatible = "nvmem-cells"; label = "calibration"; reg = <0xf00000 0x100000>; - ranges = <0 0xf00000 0x100000>; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml index f1a02d840b12..cdffbb9cedc2 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml @@ -52,6 +52,10 @@ properties: immune to paired-pages corruptions type: boolean + linux,rootfs: + description: Marks partition that contains root filesystem to mount and boot + user space from + if: not: required: [ reg ] @@ -60,4 +64,5 @@ then: $nodename: pattern: '^partition-.*$' +# This is a generic file other binding inherit from and extend additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml new file mode 100644 index 000000000000..9aca4e6c6047 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/partitions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Partitions + +description: | + This binding is generic and describes the content of the partitions container + node. All partition parsers must be referenced here. + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +oneOf: + - $ref: arm,arm-firmware-suite.yaml + - $ref: brcm,bcm4908-partitions.yaml + - $ref: brcm,bcm947xx-cfe-partitions.yaml + - $ref: fixed-partitions.yaml + - $ref: linksys,ns-partitions.yaml + - $ref: qcom,smem-part.yaml + - $ref: redboot-fis.yaml + +properties: + compatible: true + + '#address-cells': + enum: [1, 2] + + '#size-cells': + enum: [1, 2] + +patternProperties: + "partition(-.+|@[0-9a-f]+)": + $ref: partition.yaml + +required: + - compatible + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml index dc07909af023..61d12bda356e 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml @@ -15,13 +15,15 @@ description: | varies between partition table revisions. V3 supports maximum 16 partitions and V4 supports 48 partitions. +select: false + properties: compatible: const: qcom,smem-part patternProperties: "^partition-[0-9a-z]+$": - $ref: partition.yaml# + $ref: nvmem-cells.yaml required: - compatible @@ -39,22 +41,22 @@ examples: - | /* Example declaring dynamic partition */ flash { - partitions { - compatible = "qcom,smem-part"; - - partition-art { - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - label = "0:art"; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - reg = <0x6 0x6>; - }; + partitions { + compatible = "qcom,smem-part"; + + partition-art { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + label = "0:art"; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_art_6: macaddr@6 { + reg = <0x6 0x6>; + }; + }; }; - }; }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml index fee8d81b5276..ba7445cd69e8 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml @@ -16,6 +16,8 @@ description: The FLASH Image System (FIS) directory is a flash description maintainers: - Linus Walleij <linus.walleij@linaro.org> +select: false + properties: compatible: const: redboot-fis @@ -26,6 +28,10 @@ properties: device. On a flash memory with 32KB eraseblocks, 0 means the first eraseblock at 0x00000000, 1 means the second eraseblock at 0x00008000 and so on. + '#address-cells': false + + '#size-cells': false + required: - compatible - fis-index-block diff --git a/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml new file mode 100644 index 000000000000..a24bbaac3a90 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/tplink,safeloader-partitions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TP-Link SafeLoader partitions + +description: | + TP-Link home routers store various data on flash (e.g. bootloader, + flash layout, firmware, product info, configuration, calibration + data). That requires flash partitioning. + + Flash space layout of TP-Link devices is stored on flash itself using + a custom ASCII-based format. That format was first found in TP-Link + devices with a custom SafeLoader bootloader. Later it was adapted to + CFE and U-Boot bootloaders. + + Partitions specified in partitions table cover whole flash space. Some + contain static data that shouldn't get modified (device's MAC or WiFi + calibration data). Others are semi-static (like kernel). Finally some + partitions contain fully changeable content (like rootfs). + + This binding describes partitioning method and defines offset of ASCII + based partitions table. That offset is picked at manufacturing process + and doesn't change. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + const: tplink,safeloader-partitions + + partitions-table-offset: + description: Flash offset of partitions table + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + "^partition-.*$": + $ref: partition.yaml# + +required: + - partitions-table-offset + +additionalProperties: false + +examples: + - | + partitions { + compatible = "tplink,safeloader-partitions"; + partitions-table-offset = <0x100000>; + + partition-file-system { + linux,rootfs; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml index 482a2c068740..07024ee45951 100644 --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -31,9 +31,6 @@ properties: - const: core - const: aon - "#address-cells": true - "#size-cells": true - patternProperties: "^nand@[a-f0-9]$": type: object @@ -139,85 +136,85 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-ipq806x.h> nand-controller@1ac00000 { - compatible = "qcom,ipq806x-nand"; - reg = <0x1ac00000 0x800>; + compatible = "qcom,ipq806x-nand"; + reg = <0x1ac00000 0x800>; - clocks = <&gcc EBI2_CLK>, - <&gcc EBI2_AON_CLK>; - clock-names = "core", "aon"; + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; - dmas = <&adm_dma 3>; - dma-names = "rxtx"; - qcom,cmd-crci = <15>; - qcom,data-crci = <3>; + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - nand@0 { - reg = <0>; + nand@0 { + reg = <0>; - nand-ecc-strength = <4>; - nand-bus-width = <8>; + nand-ecc-strength = <4>; + nand-bus-width = <8>; - qcom,boot-partitions = <0x0 0x58a0000>; + qcom,boot-partitions = <0x0 0x58a0000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - partition@0 { - label = "boot-nand"; - reg = <0 0x58a0000>; - }; + partition@0 { + label = "boot-nand"; + reg = <0 0x58a0000>; + }; - partition@58a0000 { - label = "fs-nand"; - reg = <0x58a0000 0x4000000>; - }; + partition@58a0000 { + label = "fs-nand"; + reg = <0x58a0000 0x4000000>; + }; + }; }; - }; }; #include <dt-bindings/clock/qcom,gcc-ipq4019.h> nand-controller@79b0000 { - compatible = "qcom,ipq4019-nand"; - reg = <0x79b0000 0x1000>; - - clocks = <&gcc GCC_QPIC_CLK>, - <&gcc GCC_QPIC_AHB_CLK>; - clock-names = "core", "aon"; - - dmas = <&qpicbam 0>, - <&qpicbam 1>, - <&qpicbam 2>; - dma-names = "tx", "rx", "cmd"; - - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; - nand-ecc-strength = <4>; - nand-bus-width = <8>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "boot-nand"; - reg = <0 0x58a0000>; - }; - - partition@58a0000 { - label = "fs-nand"; - reg = <0x58a0000 0x4000000>; - }; + compatible = "qcom,ipq4019-nand"; + reg = <0x79b0000 0x1000>; + + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpicbam 0>, + <&qpicbam 1>, + <&qpicbam 2>; + dma-names = "tx", "rx", "cmd"; + + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot-nand"; + reg = <0 0x58a0000>; + }; + + partition@58a0000 { + label = "fs-nand"; + reg = <0x58a0000 0x4000000>; + }; + }; }; - }; }; ... diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml index d681a4676f06..566f330851f7 100644 --- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml @@ -19,7 +19,9 @@ properties: - const: rockchip,rk2928-nfc - const: rockchip,rv1108-nfc - items: - - const: rockchip,rk3036-nfc + - enum: + - rockchip,rk3036-nfc + - rockchip,rk3128-nfc - const: rockchip,rk2928-nfc - items: - const: rockchip,rk3308-nfc diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index eab8ea3da1fa..8cbfa1504a0f 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -101,31 +101,32 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/reset/stm32mp1-resets.h> + nand-controller@58002000 { - compatible = "st,stm32mp15-fmc2"; - reg = <0x58002000 0x1000>, - <0x80000000 0x1000>, - <0x88010000 0x1000>, - <0x88020000 0x1000>, - <0x81000000 0x1000>, - <0x89010000 0x1000>, - <0x89020000 0x1000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>, - <&mdma1 20 0x2 0x12000a08 0x0 0x0>, - <&mdma1 21 0x2 0x12000a0a 0x0 0x0>; - dma-names = "tx", "rx", "ecc"; - clocks = <&rcc FMC_K>; - resets = <&rcc FMC_R>; - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; - nand-on-flash-bbt; + compatible = "st,stm32mp15-fmc2"; + reg = <0x58002000 0x1000>, + <0x80000000 0x1000>, + <0x88010000 0x1000>, + <0x88020000 0x1000>, + <0x81000000 0x1000>, + <0x89010000 0x1000>, + <0x89020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>, + <&mdma1 20 0x2 0x12000a08 0x0 0x0>, + <&mdma1 21 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; #address-cells = <1>; - #size-cells = <1>; - }; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; }; ... diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml index 30b458c41cac..4774c92e7fc4 100644 --- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml @@ -44,26 +44,26 @@ additionalProperties: false examples: - | bus { - #address-cells = <2>; - #size-cells = <2>; - - hbmc: memory-controller@47034000 { - compatible = "ti,am654-hbmc"; - reg = <0x0 0x47034000 0x0 0x100>, - <0x5 0x00000000 0x1 0x0000000>; - ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */ - <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */ - clocks = <&k3_clks 102 0>; #address-cells = <2>; - #size-cells = <1>; - power-domains = <&k3_pds 55>; - mux-controls = <&hbmc_mux 0>; + #size-cells = <2>; - flash@0,0 { - compatible = "cypress,hyperflash", "cfi-flash"; - reg = <0x0 0x0 0x4000000>; - #address-cells = <1>; + hbmc: memory-controller@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x0 0x47034000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */ + <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */ + clocks = <&k3_clks 102 0>; + #address-cells = <2>; #size-cells = <1>; + power-domains = <&k3_pds 55>; + mux-controls = <&hbmc_mux 0>; + + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + }; }; - }; }; diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml index a953f7397c40..8a79ad300216 100644 --- a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml @@ -15,6 +15,9 @@ description: as child nodes of the GPMC controller. properties: + $nodename: + pattern: "^onenand@[0-9],[0,9]$" + compatible: const: ti,omap2-onenand diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml index 5bd964a46a9d..a6921e805e37 100644 --- a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml +++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml @@ -47,7 +47,7 @@ properties: nvmem-cells: true - nvmem-cells-names: true + nvmem-cell-names: true phy-connection-type: enum: diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml index 5aa7cf2eacb1..b44d83554ef5 100644 --- a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml +++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml @@ -44,6 +44,7 @@ required: allOf: - $ref: ethernet-controller.yaml# + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml index 64995cbb0f97..41c9760227cd 100644 --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -8,7 +8,6 @@ title: Samsung S3FWRN5 NCI NFC Controller maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - - Krzysztof Opasiak <k.opasiak@samsung.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml index e374aa7891ae..ec20e33d9b8f 100644 --- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml @@ -11,14 +11,18 @@ maintainers: properties: compatible: - enum: - - fsl,imx6q-snvs-lpgpr - - fsl,imx6ul-snvs-lpgpr - - fsl,imx7d-snvs-lpgpr - - fsl,imx8mm-snvs-lpgpr - - fsl,imx8mn-snvs-lpgpr - - fsl,imx8mp-snvs-lpgpr - - fsl,imx8mq-snvs-lpgpr + oneOf: + - items: + - enum: + - fsl,imx8mm-snvs-lpgpr + - fsl,imx8mn-snvs-lpgpr + - fsl,imx8mp-snvs-lpgpr + - fsl,imx8mq-snvs-lpgpr + - const: fsl,imx7d-snvs-lpgpr + - enum: + - fsl,imx6q-snvs-lpgpr + - fsl,imx6ul-snvs-lpgpr + - fsl,imx7d-snvs-lpgpr required: - compatible diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index 66d0ec763f0b..cf9c2f7bddc2 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -108,7 +108,7 @@ patternProperties: The power for the OPP in micro-Watts. Entries for multiple regulators shall be provided in the same field - separated by angular brackets <>. If current values aren't required + separated by angular brackets <>. If power values aren't required for a regulator, then it shall be filled with 0. If power values aren't required for any of the regulators, then this field is not required. The OPP binding doesn't provide any provisions to relate the @@ -230,9 +230,9 @@ patternProperties: minItems: 1 maxItems: 8 # Should be enough regulators - '^opp-microwatt': + '^opp-microwatt-': description: - Named opp-microwatt property. Similar to opp-microamp property, + Named opp-microwatt property. Similar to opp-microamp-<name> property, but for microwatt instead. $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml index eaf8fba2c691..2f05920fce79 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml @@ -155,7 +155,7 @@ examples: opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000>; - lock-latency-ns = <290000>; + clock-latency-ns = <290000>; turbo-mode; }; }; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml index 75da3e8eecb9..fe81d52c7277 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml @@ -27,6 +27,7 @@ properties: - nvidia,tegra234-pcie reg: + minItems: 4 items: - description: controller's application logic registers - description: configuration registers @@ -35,13 +36,16 @@ properties: available for software access. - description: aperture where the Root Port's own configuration registers are available. + - description: aperture to access the configuration space through ECAM. reg-names: + minItems: 4 items: - const: appl - const: config - const: atu_dma - const: dbi + - const: ecam interrupts: items: @@ -202,6 +206,31 @@ properties: allOf: - $ref: /schemas/pci/snps,dw-pcie.yaml# + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra194-pcie + then: + properties: + reg: + maxItems: 4 + reg-names: + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra234-pcie + then: + properties: + reg: + minItems: 5 + reg-names: + minItems: 5 unevaluatedProperties: false @@ -305,8 +334,9 @@ examples: reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ - reg-names = "appl", "config", "atu_dma", "dbi"; + <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 7287d395e1b6..7e0b015f1414 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -35,7 +35,7 @@ properties: maxItems: 5 items: enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl, - parf, cfg, link, ulreg, smu, mpu, apb, phy ] + parf, cfg, link, ulreg, smu, mpu, apb, phy, ecam ] num-lanes: description: | diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml new file mode 100644 index 000000000000..50f46a6898b1 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/amlogic,g12-ddr-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic G12 DDR performance monitor + +maintainers: + - Jiucheng Xu <jiucheng.xu@amlogic.com> + +description: | + Amlogic G12 series SoC integrate DDR bandwidth monitor. + A timer is inside and can generate interrupt when timeout. + The bandwidth is counted in the timer ISR. Different platform + has different subset of event format attribute. + +properties: + compatible: + enum: + - amlogic,g12a-ddr-pmu + - amlogic,g12b-ddr-pmu + - amlogic,sm1-ddr-pmu + + reg: + items: + - description: DMC bandwidth register space. + - description: DMC PLL register space. + + interrupts: + items: + - description: The IRQ of the inside timer timeout. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pmu { + #address-cells=<2>; + #size-cells=<2>; + + pmu@ff638000 { + compatible = "amlogic,g12a-ddr-pmu"; + reg = <0x0 0xff638000 0x0 0x100>, + <0x0 0xff638c00 0x0 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml index 1278f7293560..db5fe66ad873 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml @@ -35,7 +35,7 @@ patternProperties: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last + be found in <arch/arm/boot/dts/imxrt1050-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MXRT1050 Reference Manual for detailed CONFIG settings. $ref: /schemas/types.yaml#/definitions/uint32-matrix diff --git a/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml new file mode 100644 index 000000000000..bd8a45843566 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/loongson,ls2k-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2 SoC Pinctrl Controller + +maintainers: + - zhanghongchen <zhanghongchen@loongson.cn> + - Yinbo Zhu <zhuyinbo@loongson.cn> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + const: loongson,ls2k-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + + additionalProperties: false + + patternProperties: + 'pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + unevaluatedProperties: false + + properties: + groups: + description: + One or more groups of pins to mux to a certain function + items: + enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, + nand, sata_led, i2s, hda] + function: + description: + The function that a group of pins is muxed to + enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, + nand, sata_led, i2s, hda] + + required: + - groups + - function + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pctrl: pinctrl@1fe00420 { + compatible = "loongson,ls2k-pinctrl"; + reg = <0x1fe00420 0x18>; + sdio_pins_default: sdio-pins { + sdio-pinmux { + groups = "sdio"; + function = "sdio"; + }; + + sdio-det-pinmux { + groups = "pwm2"; + function = "gpio"; + }; + }; + + pwm1_pins_default: pwm1-pins { + pinmux { + groups = "pwm1"; + function = "pwm1"; + }; + }; + + pwm0_pins_default: pwm0-pins { + pinmux { + groups = "pwm0"; + function = "pwm0"; + }; + }; + + i2c1_pins_default: i2c1-pins { + pinmux { + groups = "i2c1"; + function = "i2c1"; + }; + }; + + i2c0_pins_default: i2c0-pins { + pinmux { + groups = "i2c0"; + function = "i2c0"; + }; + }; + + nand_pins_default: nand-pins { + pinmux { + groups = "nand"; + function = "nand"; + }; + }; + + hda_pins_default: hda-pins { + grp0-pinmux { + groups = "hda"; + function = "hda"; + }; + + grp1-pinmux { + groups = "i2s"; + function = "gpio"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index 33b5f79e741a..1b44335b1e94 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -31,7 +31,8 @@ properties: pins-are-numbered: $ref: /schemas/types.yaml#/definitions/flag description: | - Specify the subnodes are using numbered pinmux to specify pins. + Specify the subnodes are using numbered pinmux to specify pins. (UNUSED) + deprecated: true gpio-controller: true @@ -62,7 +63,6 @@ properties: required: - compatible - - pins-are-numbered - gpio-controller - "#gpio-cells" @@ -150,7 +150,6 @@ examples: compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000B000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; - pins-are-numbered; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 8c79fcef7c52..a2141eb0854e 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -8,31 +8,22 @@ title: Mediatek MT6779 Pin Controller maintainers: - Andy Teng <andy.teng@mediatek.com> + - Sean Wang <sean.wang@kernel.org> -description: |+ - The pin controller node should be the child of a syscon node with the - required property: - - compatible: "syscon" +description: + The MediaTek pin controller on MT6779 is used to control pin + functions, pull up/down resistance and drive strength options. properties: compatible: - const: mediatek,mt6779-pinctrl + enum: + - mediatek,mt6779-pinctrl + - mediatek,mt6797-pinctrl reg: - minItems: 9 - maxItems: 9 - - reg-names: - items: - - const: "gpio" - - const: "iocfg_rm" - - const: "iocfg_br" - - const: "iocfg_lm" - - const: "iocfg_lb" - - const: "iocfg_rt" - - const: "iocfg_lt" - - const: "iocfg_tl" - - const: "eint" + description: Physical addresses for GPIO base(s) and EINT registers. + + reg-names: true gpio-controller: true @@ -59,19 +50,65 @@ properties: "#interrupt-cells": const: 2 -allOf: - - $ref: "pinctrl.yaml#" - required: - compatible - reg - reg-names - gpio-controller - "#gpio-cells" - - gpio-ranges - - interrupt-controller - - interrupts - - "#interrupt-cells" + +allOf: + - $ref: "pinctrl.yaml#" + - if: + properties: + compatible: + contains: + const: mediatek,mt6779-pinctrl + then: + properties: + reg: + minItems: 9 + maxItems: 9 + + reg-names: + items: + - const: gpio + - const: iocfg_rm + - const: iocfg_br + - const: iocfg_lm + - const: iocfg_lb + - const: iocfg_rt + - const: iocfg_lt + - const: iocfg_tl + - const: eint + - if: + properties: + compatible: + contains: + const: mediatek,mt6797-pinctrl + then: + properties: + reg: + minItems: 5 + maxItems: 5 + + reg-names: + items: + - const: gpio + - const: iocfgl + - const: iocfgb + - const: iocfgr + - const: iocfgt + - if: + properties: + reg-names: + contains: + const: eint + then: + required: + - interrupts + - interrupt-controller + - "#interrupt-cells" patternProperties: '-[0-9]*$': @@ -113,6 +150,12 @@ patternProperties: input-schmitt-disable: true + drive-strength: + enum: [2, 4, 8, 12, 16] + + slew-rate: + enum: [0, 1] + mediatek,pull-up-adv: description: | Pull up setings for 2 pull resistors, R0 and R1. User can diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml deleted file mode 100644 index 637a8386e23e..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml +++ /dev/null @@ -1,176 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT6797 Pin Controller - -maintainers: - - Sean Wang <sean.wang@kernel.org> - -description: |+ - The MediaTek's MT6797 Pin controller is used to control SoC pins. - -properties: - compatible: - const: mediatek,mt6797-pinctrl - - reg: - minItems: 5 - maxItems: 5 - - reg-names: - items: - - const: gpio - - const: iocfgl - - const: iocfgb - - const: iocfgr - - const: iocfgt - - gpio-controller: true - - "#gpio-cells": - const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - - interrupt-controller: true - - interrupts: - maxItems: 1 - - "#interrupt-cells": - const: 2 - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - - reg-names - - gpio-controller - - "#gpio-cells" - -patternProperties: - '-[0-9]+$': - type: object - additionalProperties: false - patternProperties: - 'pins': - type: object - additionalProperties: false - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and input - schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" - - properties: - pinmux: - description: - integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are - defined as macros in <soc>-pinfunc.h directly. - - bias-disable: true - - bias-pull-up: true - - bias-pull-down: true - - input-enable: true - - input-disable: true - - output-enable: true - - output-low: true - - output-high: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - drive-strength: - enum: [2, 4, 8, 12, 16] - - slew-rate: - enum: [0, 1] - - mediatek,pull-up-adv: - description: | - Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - mediatek,pull-down-adv: - description: | - Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - mediatek,tdsel: - description: | - An integer describing the steps for output level shifter duty - cycle when asserted (high pulse width adjustment). Valid arguments - are from 0 to 15. - $ref: /schemas/types.yaml#/definitions/uint32 - - mediatek,rdsel: - description: | - An integer describing the steps for input level shifter duty cycle - when asserted (high pulse width adjustment). Valid arguments are - from 0 to 63. - $ref: /schemas/types.yaml#/definitions/uint32 - - required: - - pinmux - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/pinctrl/mt6797-pinfunc.h> - - soc { - #address-cells = <2>; - #size-cells = <2>; - - pio: pinctrl@10005000 { - compatible = "mediatek,mt6797-pinctrl"; - reg = <0 0x10005000 0 0x1000>, - <0 0x10002000 0 0x400>, - <0 0x10002400 0 0x400>, - <0 0x10002800 0 0x400>, - <0 0x10002C00 0 0x400>; - reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt"; - gpio-controller; - #gpio-cells = <2>; - - uart_pins_a: uart-0 { - pins1 { - pinmux = <MT6797_GPIO232__FUNC_URXD1>, - <MT6797_GPIO233__FUNC_UTXD1>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 89b8f3dd67a1..216b356cd519 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -87,6 +87,8 @@ patternProperties: "wifi_led" "led" 1, 2 "i2c" "i2c" 3, 4 "uart1_0" "uart" 7, 8, 9, 10 + "uart1_rx_tx" "uart" 42, 43 + "uart1_cts_rts" "uart" 44, 45 "pcie_clk" "pcie" 9 "pcie_wake" "pcie" 10 "spi1_0" "spi" 11, 12, 13, 14 @@ -98,9 +100,11 @@ patternProperties: "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 "spi1_1" "spi" 23, 24, 25, 26 - "uart1_2" "uart" 29, 30, 31, 32 + "uart1_2_rx_tx" "uart" 29, 30 + "uart1_2_cts_rts" "uart" 31, 32 "uart1_1" "uart" 23, 24, 25, 26 - "uart2_0" "uart" 29, 30, 31, 32 + "uart2_0_rx_tx" "uart" 29, 30 + "uart2_0_cts_rts" "uart" 31, 32 "spi0" "spi" 33, 34, 35, 36 "spi0_wp_hold" "spi" 37, 38 "uart1_3_rx_tx" "uart" 35, 36 @@ -157,7 +161,7 @@ patternProperties: then: properties: groups: - enum: [emmc, emmc_rst] + enum: [emmc_45, emmc_51] - if: properties: function: @@ -197,7 +201,9 @@ patternProperties: then: properties: groups: - enum: [pcie_clk, pcie_wake, pcie_pereset] + items: + enum: [pcie_clk, pcie_wake, pcie_pereset] + maxItems: 3 - if: properties: function: @@ -205,7 +211,9 @@ patternProperties: then: properties: groups: - enum: [pwm0, pwm1_0, pwm1_1] + items: + enum: [pwm0, pwm1_0, pwm1_1] + maxItems: 2 - if: properties: function: @@ -213,7 +221,9 @@ patternProperties: then: properties: groups: - enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3] + items: + enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3] + maxItems: 2 - if: properties: function: @@ -221,8 +231,12 @@ patternProperties: then: properties: groups: - enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx, - uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2] + items: + enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1, + uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx, + uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts, + uart2_1, uart0, uart1, uart2] + maxItems: 2 - if: properties: function: @@ -278,9 +292,23 @@ patternProperties: bias-disable: true - bias-pull-up: true - - bias-pull-down: true + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: | + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: | + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. input-enable: true @@ -332,6 +360,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> soc { #address-cells = <2>; @@ -356,6 +385,27 @@ examples: interrupt-parent = <&gic>; #interrupt-cells = <2>; + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0", "pwm1_0"; + }; + }; + + spi0_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; + uart1_pins: uart1-pins { mux { function = "uart"; @@ -363,6 +413,13 @@ examples: }; }; + uart1_3_pins: uart1-3-pins { + mux { + function = "uart"; + groups = "uart1_3_rx_tx", "uart1_3_cts_rts"; + }; + }; + uart2_pins: uart2-pins { mux { function = "uart"; @@ -370,5 +427,34 @@ examples: }; }; + mmc0_pins_default: mmc0-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml index 73ae6e11410b..9399e0215526 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml @@ -46,8 +46,11 @@ properties: const: 2 interrupts: - description: The interrupt outputs to sysirq. - maxItems: 1 + description: Interrupt outputs to the system interrupt controller (sysirq). + minItems: 1 + items: + - description: EINT interrupt + - description: EINT event_b interrupt # PIN CONFIGURATION NODES patternProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml new file mode 100644 index 000000000000..96c608bcb87e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +description: | + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of + the phrase "pin configuration node". + + Tegra's pin configuration nodes act as a container for an arbitrary number + of subnodes. Each of these subnodes represents some desired configuration + for a pin, a group, or a list of pins or groups. This configuration can + include the mux function to select on those pin(s)/ group(s), and various + pin configuration parameters, such as pull-up, tristate, drive strength, + etc. + + The name of each subnode is not important; all subnodes should be + enumerated and processed purely based on their content. + + Each subnode only affects those parameters that are explicitly listed. In + other words, a subnode that lists a mux function but no pin configuration + parameters implies no information about any pin configuration parameters. + + Similarly, a pin subnode that describes a pullup parameter implies no + information about e.g. the mux function or tristate parameter. For this + reason, even seemingly boolean values are actually tristates in this + binding: unspecified, off, or on. Unspecified is represented as an absent + property, and off/on are represented as integer values 0 and 1. + + Note that many of these properties are only valid for certain specific pins + or groups. See the Tegra TRM and various pinmux spreadsheets for complete + details regarding which groups support which functionality. The Linux + pinctrl driver may also be a useful reference, since it consolidates, + disambiguates, and corrects data from all those sources. + +properties: + nvidia,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: An array of strings. Each string contains the name of a pin + or group. Valid values for these names are listed below. + + nvidia,function: + $ref: /schemas/types.yaml#/definitions/string + description: A string containing the name of the function to mux to the + pin or group. Valid values for function names are listed below. See the + Tegra TRM to determine which are valid for each pin or group. + + nvidia,pull: + description: Pull-down/up setting to apply to the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: none + const: 0 + - description: down + const: 1 + - description: up + const: 2 + + nvidia,tristate: + description: Tristate setting to apply to the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: drive + const: 0 + - description: tristate + const: 1 + + nvidia,schmitt: + description: Enable Schmitt trigger on the input. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable Schmitt trigger on the input + const: 0 + - description: enable Schmitt trigger on the input + const: 1 + + nvidia,pull-down-strength: + description: Controls drive strength. 0 is weakest. The range of valid + values depends on the pingroup. See "CAL_DRVDN" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,pull-up-strength: + description: Controls drive strength. 0 is weakest. The range of valid + values depends on the pingroup. See "CAL_DRVUP" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,high-speed-mode: + description: Enable high speed mode the pins. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: normal speed mode + const: 0 + - description: high speed mode + const: 1 + + nvidia,low-power-mode: + description: Controls the drive power or current. Valid values are from 0 + through 3, where 0 specifies the least power and 3 specifies the most + power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + nvidia,enable-input: + description: Enable the pin's input path. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable input (i.e. output only) + const: 0 + - description: enable input + const: 1 + + nvidia,open-drain: + description: Open-drain configuration for the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable open-drain + const: 0 + - description: enable open-drain + const: 1 + + nvidia,lock: + description: Lock the pin configuration against further changes until + reset. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable pin configuration lock + const: 0 + - description: enable pin configuration lock + const: 1 + + nvidia,io-reset: + description: reset the I/O path + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + + nvidia,rcv-sel: + description: select VIL/VIH receivers + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: normal receivers + const: 0 + - description: high-voltage receivers + const: 1 + + nvidia,drive-type: + description: Drive type to configure for the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + nvidia,io-hv: + description: Select high-voltage receivers. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: Use normal receivers. + const: 0 + - description: Use high-voltage receivers. + const: 1 + + nvidia,slew-rate-rising: + description: Controls rising signal slew rate. 0 is fastest. The range of + valid values depends on the pingroup. See "DRVDN_SLWR" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,slew-rate-falling: + description: Controls falling signal slew rate. 0 is fastest. The range of + valid values depends on the pingroup. See "DRVUP_SLWF" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt deleted file mode 100644 index fb70856c5b51..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt +++ /dev/null @@ -1,131 +0,0 @@ -NVIDIA Tegra114 pinmux controller - -The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30 -pinctrl binding, as described in nvidia,tegra20-pinmux.txt and -nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as -a baseline, and only documents the differences between the two bindings. - -Required properties: -- compatible: "nvidia,tegra114-pinmux" -- reg: Should contain the register physical address and length for each of - the pad control and mux registers. The first bank of address must be the - driver strength pad control register address and second bank address must - be pinmux register address. - -Tegra114 adds the following optional properties for pin configuration subnodes: -- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. -- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. 0: no, 1: yes. -- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. -- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high. -- nvidia,drive-type: Integer. Valid range 0...3. - -As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding -which groups support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, - nvidia,io-reset and nvidia,rcv-sel. - - ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, - ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, - ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, - dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, - sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, - sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, - ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, - uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, - uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5, - gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, - clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7, - gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3, - gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0, - gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, - gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, - gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, - gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0, - gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5, - gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, - sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, - sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0, - pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, - pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, - kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, - kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, - kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, - kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req, - cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, - dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, - dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, - gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4, - gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6, - sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, - sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2, - gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5, - sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n. - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode - and nvidia,drive-type. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, - dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, - gmh, owr, uda. - -Valid values for nvidia,functions are: - - blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, - displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2, - extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, - i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi, - pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3, - rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, - spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, - usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 - -Example: - - pinmux: pinmux { - compatible = "nvidia,tegra114-pinmux"; - reg = <0x70000868 0x148 /* Pad control registers */ - 0x70003000 0x40c>; /* PinMux registers */ - }; - -Example board file extract: - - pinctrl { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml new file mode 100644 index 000000000000..065dedb3573a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra114-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra114 pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra114-pinmux + + reg: + items: + - description: pad control registers + - description: mux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, + ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, + ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1, + ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, + sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5, + clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5, + uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, + uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, gen1_i2c_sda_pc5, gen1_i2c_scl_pc4, dap4_fs_pp4, + dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0, + clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7, + gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, + gmi_cs2_n_pk3, gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, + gmi_cs7_n_pi6, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2, + gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6, + gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, + gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, + gmi_ad15_ph7, gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, + gmi_a19_pk7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_p_pj3, + gmi_rst_n_pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, + sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, + sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, + sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, + kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, + kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, + kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, + kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, + core_pwr_req, cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, + dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, clk1_req_pee2, + clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, + dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, + gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, + gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, + sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, + sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, + sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, + usb_vbus_en0_pn4, usb_vbus_en1_pn5, sdmmc3_clk_lb_in_pee5, + sdmmc3_clk_lb_out_pee4, reset_out_n, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1, + drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_owr, drive_uda ] + + nvidia,function: + enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, + displaya, displaya_alt, displayb, dtv, emc_dll, extperiph1, + extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, + i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, + nand, nand_alt, owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, + reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, + sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, + spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, usb, + vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,rcv-sel: true + nvidia,drive-type: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + pinmux@70000868 { + compatible = "nvidia,tegra114-pinmux"; + reg = <0x70000868 0x148>, /* Pad control registers */ + <0x70003000 0x40c>; /* PinMux registers */ + + pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt deleted file mode 100644 index f4d06bb0b55a..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt +++ /dev/null @@ -1,153 +0,0 @@ -NVIDIA Tegra124 pinmux controller - -The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30 -pinctrl binding, as described in nvidia,tegra20-pinmux.txt and -nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as -a baseline, and only documents the differences between the two bindings. - -Required properties: -- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux". For - Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'. -- reg: Should contain a list of base address and size pairs for: - -- first entry - the drive strength and pad control registers. - -- second entry - the pinmux registers - -- third entry - the MIPI_PAD_CTRL register - -Tegra124 adds the following optional properties for pin configuration subnodes. -The macros for options are defined in the - include/dt-binding/pinctrl/pinctrl-tegra.h. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-reset: Integer. Reset the IO path. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE - -Please refer the Tegra TRM for complete details regarding which groups -support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input. Some support nvidia,lock nvidia,open-drain, - nvidia,io-reset and nvidia,rcv-sel. - - ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, - ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, - ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, - dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, - sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, - sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, - ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, - uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, - uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4, - gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, - dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, - pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, - pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, - pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, - sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, - sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, - sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1, - cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck, - pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, - kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, - kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, - kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1, - kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, - kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, - clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, - dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6, - spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, - dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, - gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, - sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, - sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, - pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5, - pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3, - sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, - usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5, - gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, - pff2, dp_hpd_pff0, - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode - and nvidia,drive-type. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, - dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, - gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4. - - MIPI pad control groups: - - These support only the nvidia,function property. - - dsi_b - -Valid values for nvidia,functions are: - - blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, - displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3, - gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, - i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3, - pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, - sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, - uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, - vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1, - dp, rtck, sys, clk tmds, csi, dsi_b - -Example: - - pinmux: pinmux { - compatible = "nvidia,tegra124-pinmux"; - reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ - <0x0 0x70003000 0x0 0x434>, /* Mux registers */ - <0x0 0x70000820 0x0 0x8>; /* MIPI pad control */ - }; - -Example pinmux entries: - - pinctrl { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - nvidia,function = "sdmmc4"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml new file mode 100644 index 000000000000..f924652bef0d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra124-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra124 pinctrl binding is very similar to the Tegra20 and + Tegra30 pinctrl binding, as described in nvidia,tegra20-pinmux.yaml and + nvidia,tegra30-pinmux.yaml. In fact, this document assumes that binding as a + baseline, and only documents the differences between the two bindings. + +properties: + compatible: + oneOf: + - const: nvidia,tegra124-pinmux + - items: + - const: nvidia,tegra132-pinmux + - const: nvidia,tegra124-pinmux + + reg: + items: + - description: driver strength and pad control registers + - description: pinmux registers + - description: MIPI_PAD_CTRL registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + $ref: /schemas/types.yaml#/definitions/string-array + items: + enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, + ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, + ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1, + ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, + sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5, + clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5, + uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, + uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, dap4_fs_pp4, + dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0, + clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, pj0, pj2, pk3, pk4, + pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, pg7, ph0, + ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, + pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, + sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, + sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, + sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, pcc2, jtag_rtck, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, + kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, + kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, + kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, + kb_row12_ps4, kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, + kb_col0_pq0, kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, + kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, kb_col7_pq7, + clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, + clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, + dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, + spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, + dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, + gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, + gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, + sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, + sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, + pex_wake_n_pdd3, pex_l1_rst_n_pdd5, pex_l1_clkreq_n_pdd6, + hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2, + gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, + usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, + sdmmc3_clk_lb_in_pee5, gmi_clk_lb, reset_out_n, + kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, pff2, + dp_hpd_pff0, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1, + drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_owr, drive_uda, drive_gpv, + drive_dev3, drive_cec, drive_usb_vbus_en, drive_ao3, + drive_ao0, drive_hv0, drive_sdio4, drive_ao4, + # MIPI pad control groups + mipi_pad_ctrl_dsi_b ] + + nvidia,function: + enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, + displaya, displaya_alt, displayb, dtv, extperiph1, + extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, + i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, + owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, + rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, + spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, + uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, + vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, + pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,rcv-sel: true + nvidia,drive-type: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@70000868 { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x70000868 0x164>, /* Pad control registers */ + <0x70003000 0x434>, /* Mux registers */ + <0x70000820 0x8>; /* MIPI pad control */ + + sdmmc4_default: pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt deleted file mode 100644 index 90d38f710635..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt +++ /dev/null @@ -1,107 +0,0 @@ -NVIDIA Tegra194 pinmux controller - -Required properties: -- compatible: "nvidia,tegra194-pinmux" -- reg: Should contain a list of base address and size pairs for: - - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) - - second entry: The PINMUX_AUX_* registers (pinmux) - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -See the TRM to determine which properties and values apply to each pin/group. -Macro values for property values are defined in -include/dt-binding/pinctrl/pinctrl-tegra.h. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-hv: Integer. Select high-voltage receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,drive-type: Integer. Valid range 0...3. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. - -Valid values for pin and group names (nvidia,pin) are: - - These correspond to Tegra PADCTL_* (pinmux) registers. - - Mux groups: - - These correspond to Tegra PADCTL_* (pinmux) registers. Any property - that exists in those registers may be set for the following pin names. - - pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1 - - Drive groups: - - These registers controls a single pin for which a mux group exists. - See the list above for the pin name to use when configuring the pinmux. - - pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1 - -Valid values for nvidia,functions are: - - pe5 - -Power Domain: - pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 are part of PCIE C5 power - partition. Client devices must enable this partition before accessing - these pins here. - - -Example: - - tegra_pinctrl: pinmux: pinmux@2430000 { - compatible = "nvidia,tegra194-pinmux"; - reg = <0x2430000 0x17000 - 0xc300000 0x4000>; - - pinctrl-names = "pex_rst"; - pinctrl-0 = <&pex_rst_c5_out_state>; - - pex_rst_c5_out_state: pex_rst_c5_out { - pex_rst { - nvidia,pins = "pex_l5_rst_n_pgg1"; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,lpdr = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,io-hv = <TEGRA_PIN_ENABLE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml new file mode 100644 index 000000000000..60a4bdf01bf2 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml @@ -0,0 +1,284 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra194-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra194-pinmux + - nvidia,tegra194-pinmux-aon + + reg: + items: + - description: pinmux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + unevaluatedProperties: false + properties: + nvidia,function: + enum: [ aud, can0, can1, ccla, dca, dcb, dgpu, directdc, directdc1, + displaya, displayb, dmic1, dmic2, dmic3, dmic4, dmic5, dp, + dspk0, dspk1, eqos, extperiph1, extperiph2, extperiph3, + extperiph4, gp, gpio, hdmi, i2c1, i2c2, i2c3, i2c5, i2c8, + i2s1, i2s2, i2s3, i2s4, i2s5, i2s6, igpu, iqc1, iqc2, mipi, + nv, pe0, pe1, pe2, pe3, pe4, pe5, qspi, qspi0, qspi1, rsvd0, + rsvd1, rsvd2, rsvd3, sata, sce, sdmmc1, sdmmc3, sdmmc4, slvs, + soc, spdif, spi1, spi2, spi3, touch, uarta, uartb, uartc, + uartd, uarte, uartg, ufs0, usb, vgp1, vgp2, vgp3, vgp4, vgp5, + vgp6, wdt ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + + required: + - nvidia,pins + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + const: nvidia,tegra194-pinmux + then: + patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + additionalProperties: + properties: + nvidia,pins: + description: An array of strings. Each string contains the name + of a pin or group. Valid values for these names are listed + below. + + Note that the pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 pins + are part of PCIE C5 power partition. Client devices must + enable this partition before accessing the configuration for + these pins. + items: + enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2, + dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5, + dap4_din_pa6, dap4_fs_pa7, cpu_pwr_req_0_pb0, + cpu_pwr_req_1_pb1, qspi0_sck_pc0, qspi0_cs_n_pc1, + qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4, + qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7, + qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2, + qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1, + eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4, + eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7, + eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2, + eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5, + soc_gpio00_pg0, soc_gpio01_pg1, soc_gpio02_pg2, + soc_gpio03_pg3, soc_gpio08_pg4, soc_gpio09_pg5, + soc_gpio10_pg6, soc_gpio11_pg7, soc_gpio12_ph0, + soc_gpio13_ph1, soc_gpio14_ph2, uart4_tx_ph3, + uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6, + dap2_sclk_ph7, dap2_dout_pi0, dap2_din_pi1, + dap2_fs_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4, + sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2, + sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5, + pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1, + pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3, + pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5, + pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7, + pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1, + pex_wake_n_pl2, sata_dev_slp_pl3, dp_aux_ch0_hpd_pm0, + dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2, + dp_aux_ch3_hpd_pm3, hdmi_cec_pm4, soc_gpio50_pm5, + soc_gpio51_pm6, soc_gpio52_pm7, soc_gpio53_pn0, + soc_gpio54_pn1, soc_gpio55_pn2, sdmmc3_clk_po0, + sdmmc3_cmd_po1, sdmmc3_dat0_po2, sdmmc3_dat1_po3, + sdmmc3_dat2_po4, sdmmc3_dat3_po5, extperiph1_clk_pp0, + extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3, + soc_gpio04_pp4, soc_gpio05_pp5, soc_gpio06_pp6, + soc_gpio07_pp7, soc_gpio20_pq0, soc_gpio21_pq1, + soc_gpio22_pq2, soc_gpio23_pq3, soc_gpio40_pq4, + soc_gpio41_pq5, soc_gpio42_pq6, soc_gpio43_pq7, + soc_gpio44_pr0, soc_gpio45_pr1, uart1_tx_pr2, + uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5, + dap1_sclk_ps0, dap1_dout_ps1, dap1_din_ps2, + dap1_fs_ps3, aud_mclk_ps4, soc_gpio30_ps5, + soc_gpio31_ps6, soc_gpio32_ps7, soc_gpio33_pt0, + dap3_sclk_pt1, dap3_dout_pt2, dap3_din_pt3, + dap3_fs_pt4, dap5_sclk_pt5, dap5_dout_pt6, + dap5_din_pt7, dap5_fs_pu0, directdc1_clk_pv0, + directdc1_in_pv1, directdc1_out0_pv2, + directdc1_out1_pv3, directdc1_out2_pv4, + directdc1_out3_pv5, directdc1_out4_pv6, + directdc1_out5_pv7, directdc1_out6_pw0, + directdc1_out7_pw1, gpu_pwr_req_px0, cv_pwr_req_px1, + gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, uart2_rx_px5, + uart2_rts_px6, uart2_cts_px7, spi3_sck_py0, + spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3, + spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6, + uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1, + usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4, + spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7, + ufs0_ref_clk_pff0, ufs0_rst_pff1, + pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1, + directdc_comp, sdmmc4_clk, sdmmc4_cmd, sdmmc4_dqs, + sdmmc4_dat7, sdmmc4_dat6, sdmmc4_dat5, sdmmc4_dat4, + sdmmc4_dat3, sdmmc4_dat2, sdmmc4_dat1, sdmmc4_dat0, + sdmmc1_comp, sdmmc1_hv_trim, sdmmc3_comp, + sdmmc3_hv_trim, eqos_comp, qspi_comp, + # drive groups + drive_soc_gpio33_pt0, drive_soc_gpio32_ps7, + drive_soc_gpio31_ps6, drive_soc_gpio30_ps5, + drive_aud_mclk_ps4, drive_dap1_fs_ps3, + drive_dap1_din_ps2, drive_dap1_dout_ps1, + drive_dap1_sclk_ps0, drive_dap3_fs_pt4, + drive_dap3_din_pt3, drive_dap3_dout_pt2, + drive_dap3_sclk_pt1, drive_dap5_fs_pu0, + drive_dap5_din_pt7, drive_dap5_dout_pt6, + drive_dap5_sclk_pt5, drive_dap6_fs_pa3, + drive_dap6_din_pa2, drive_dap6_dout_pa1, + drive_dap6_sclk_pa0, drive_dap4_fs_pa7, + drive_dap4_din_pa6, drive_dap4_dout_pa5, + drive_dap4_sclk_pa4, drive_extperiph2_clk_pp1, + drive_extperiph1_clk_pp0, drive_cam_i2c_sda_pp3, + drive_cam_i2c_scl_pp2, drive_soc_gpio40_pq4, + drive_soc_gpio41_pq5, drive_soc_gpio42_pq6, + drive_soc_gpio43_pq7, drive_soc_gpio44_pr0, + drive_soc_gpio45_pr1, drive_soc_gpio20_pq0, + drive_soc_gpio21_pq1, drive_soc_gpio22_pq2, + drive_soc_gpio23_pq3, drive_soc_gpio04_pp4, + drive_soc_gpio05_pp5, drive_soc_gpio06_pp6, + drive_soc_gpio07_pp7, drive_uart1_cts_pr5, + drive_uart1_rts_pr4, drive_uart1_rx_pr3, + drive_uart1_tx_pr2, drive_dap2_din_pi1, + drive_dap2_dout_pi0, drive_dap2_fs_pi2, + drive_dap2_sclk_ph7, drive_uart4_cts_ph6, + drive_uart4_rts_ph5, drive_uart4_rx_ph4, + drive_uart4_tx_ph3, drive_soc_gpio03_pg3, + drive_soc_gpio02_pg2, drive_soc_gpio01_pg1, + drive_soc_gpio00_pg0, drive_gen1_i2c_scl_pi3, + drive_gen1_i2c_sda_pi4, drive_soc_gpio08_pg4, + drive_soc_gpio09_pg5, drive_soc_gpio10_pg6, + drive_soc_gpio11_pg7, drive_soc_gpio12_ph0, + drive_soc_gpio13_ph1, drive_soc_gpio14_ph2, + drive_soc_gpio50_pm5, drive_soc_gpio51_pm6, + drive_soc_gpio52_pm7, drive_soc_gpio53_pn0, + drive_soc_gpio54_pn1, drive_soc_gpio55_pn2, + drive_dp_aux_ch0_hpd_pm0, drive_dp_aux_ch1_hpd_pm1, + drive_dp_aux_ch2_hpd_pm2, drive_dp_aux_ch3_hpd_pm3, + drive_hdmi_cec_pm4, drive_pex_l2_clkreq_n_pk4, + drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2, + drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0, + drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5, + drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7, + drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1, + drive_sata_dev_slp_pl3, drive_pex_l5_clkreq_n_pgg0, + drive_pex_l5_rst_n_pgg1, drive_cpu_pwr_req_1_pb1, + drive_cpu_pwr_req_0_pb0, drive_sdmmc1_clk_pj0, + drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5, + drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3, + drive_sdmmc1_dat0_pj2, drive_sdmmc3_dat3_po5, + drive_sdmmc3_dat2_po4, drive_sdmmc3_dat1_po3, + drive_sdmmc3_dat0_po2, drive_sdmmc3_cmd_po1, + drive_sdmmc3_clk_po0, drive_gpu_pwr_req_px0, + drive_spi3_miso_py1, drive_spi1_cs0_pz6, + drive_spi3_cs0_py3, drive_spi1_miso_pz4, + drive_spi3_cs1_py4, drive_gp_pwm3_px3, + drive_gp_pwm2_px2, drive_spi1_sck_pz3, + drive_spi3_sck_py0, drive_spi1_cs1_pz7, + drive_spi1_mosi_pz5, drive_spi3_mosi_py2, + drive_cv_pwr_req_px1, drive_uart2_tx_px4, + drive_uart2_rx_px5, drive_uart2_rts_px6, + drive_uart2_cts_px7, drive_uart5_rx_py6, + drive_uart5_tx_py5, drive_uart5_rts_py7, + drive_uart5_cts_pz0, drive_usb_vbus_en0_pz1, + drive_usb_vbus_en1_pz2, drive_ufs0_rst_pff1, + drive_ufs0_ref_clk_pff0 ] + + - if: + properties: + compatible: + const: nvidia,tegra194-pinmux-aon + then: + patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ can1_dout_paa0, can1_din_paa1, can0_dout_paa2, + can0_din_paa3, can0_stb_paa4, can0_en_paa5, + can0_wake_paa6, can0_err_paa7, can1_stb_pbb0, + can1_en_pbb1, can1_wake_pbb2, can1_err_pbb3, + spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2, + spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5, + uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0, + gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2, + safe_state_pee0, vcomp_alert_pee1, + ao_retention_n_pee2, batt_oc_pee3, power_on_pee4, + pwr_i2c_scl_pee5, pwr_i2c_sda_pee6, sys_reset_n, + shutdown_n, pmu_int_n, soc_pwr_req, clk_32k_in, + # drive groups + drive_shutdown_n, drive_pmu_int_n, + drive_safe_state_pee0, drive_vcomp_alert_pee1, + drive_soc_pwr_req, drive_batt_oc_pee3, + drive_clk_32k_in, drive_power_on_pee4, + drive_pwr_i2c_scl_pee5, drive_pwr_i2c_sda_pee6, + drive_ao_retention_n_pee2, drive_touch_clk_pcc4, + drive_uart3_rx_pcc6, drive_uart3_tx_pcc5, + drive_gen8_i2c_sda_pdd2, drive_gen8_i2c_scl_pdd1, + drive_spi2_mosi_pcc2, drive_gen2_i2c_scl_pcc7, + drive_spi2_cs0_pcc3, drive_gen2_i2c_sda_pdd0, + drive_spi2_sck_pcc0, drive_spi2_miso_pcc1, + drive_can1_dout_paa0, drive_can1_din_paa1, + drive_can0_dout_paa2, drive_can0_din_paa3, + drive_can0_stb_paa4, drive_can0_en_paa5, + drive_can0_wake_paa6, drive_can0_err_paa7, + drive_can1_stb_pbb0, drive_can1_en_pbb1, + drive_can1_wake_pbb2, drive_can1_err_pbb3 ] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x2430000 0x17000>; + + pinctrl-names = "pex_rst"; + pinctrl-0 = <&pex_rst_c5_out_state>; + + pex_rst_c5_out_state: pinmux-pex-rst-c5-out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt deleted file mode 100644 index 3c8ce28baad6..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt +++ /dev/null @@ -1,143 +0,0 @@ -NVIDIA Tegra20 pinmux controller - -Required properties: -- compatible: "nvidia,tegra20-pinmux" -- reg: Should contain the register physical address and length for each of - the tri-state, mux, pull-up/down, and pad control register sets. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function or tristate parameter. For this -reason, even seemingly boolean values are actually tristates in this binding: -unspecified, off, or on. Unspecified is represented as an absent property, -and off/on are represented as integer values 0 and 1. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. Valid values for function names are listed below. See the Tegra - TRM to determine which are valid for each pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. - 0: no, 1: yes. -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - 0: no, 1: yes. -- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is - most power. Controls the drive power or current. See "Low Power Mode" - or "LPMD1" and "LPMD0" in the Tegra TRM. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. -- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVDN_SLWR" in the Tegra TRM. -- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVUP_SLWF" in the Tegra TRM. - -Note that many of these properties are only valid for certain specific pins -or groups. See the Tegra TRM and various pinmux spreadsheets for complete -details regarding which groups support which functionality. The Linux pinctrl -driver may also be a useful reference, since it consolidates, disambiguates, -and corrects data from all those sources. - -Valid values for pin and group names are: - - mux groups: - - These all support nvidia,function, nvidia,tristate, and many support - nvidia,pull. - - ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4, - ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7, - gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, - ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13, - ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp, - lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs, - owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, - spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad, - uca, ucb, uda. - - tristate groups: - - These only support nvidia,pull. - - ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0, - ld19_18, ld21_20, ld23_22. - - drive groups: - - With some exceptions, these support nvidia,high-speed-mode, - nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength, - nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling. - - drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2, - drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg, - drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa, - drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a, - drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc, - drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr, - drive_uda. - -Valid values for nvidia,functions are: - - ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5, - displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int, - hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand, - osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3, - pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, - sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, - spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi, - vi, vi_sensor_clk, xio - -Example: - - pinctrl@70000000 { - compatible = "nvidia,tegra20-pinmux"; - reg = < 0x70000014 0x10 /* Tri-state registers */ - 0x70000080 0x20 /* Mux registers */ - 0x700000a0 0x14 /* Pull-up/down registers */ - 0x70000868 0xa8 >; /* Pad control registers */ - }; - -Example board file extract: - - pinctrl@70000000 { - sdio4_default: sdio4_default { - atb { - nvidia,pins = "atb", "gma", "gme"; - nvidia,function = "sdio4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@c8000600 { - pinctrl-names = "default"; - pinctrl-0 = <&sdio4_default>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml new file mode 100644 index 000000000000..432ea40209a8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra20-pinmux + + reg: + items: + - description: tri-state registers + - description: mux register + - description: pull-up/down registers + - description: pad control registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, + dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma, + gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx, + irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1, + ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, + ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, + lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck, + lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb, + sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia, + spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, + uad, uca, ucb, uda, + # tristate groups + ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, + lc, ld17_0, ld19_18, ld21_20, ld23_22, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, + drive_cdev2, drive_csus, drive_dap1, drive_dap2, + drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2, + drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa, + drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, + drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk, + drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb, + drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ] + + nvidia,function: + enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, + dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, + gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, + mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1, + pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr, + pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2, + sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3, + spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi, + vi, vi_sensor_clk, xio ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@70000000 { + compatible = "nvidia,tegra20-pinmux"; + reg = <0x70000014 0x10>, /* Tri-state registers */ + <0x70000080 0x20>, /* Mux registers */ + <0x700000a0 0x14>, /* Pull-up/down registers */ + <0x70000868 0xa8>; /* Pad control registers */ + + pinmux { + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt deleted file mode 100644 index 85f211436b8e..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt +++ /dev/null @@ -1,166 +0,0 @@ -NVIDIA Tegra210 pinmux controller - -Required properties: -- compatible: "nvidia,tegra210-pinmux" -- reg: Should contain a list of base address and size pairs for: - - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) - - second entry: The PINMUX_AUX_* registers (pinmux) - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function or tristate parameter. For this -reason, even seemingly boolean values are actually tristates in this binding: -unspecified, off, or on. Unspecified is represented as an absent property, -and off/on are represented as integer values 0 and 1. - -See the TRM to determine which properties and values apply to each pin/group. -Macro values for property values are defined in -include/dt-binding/pinctrl/pinctrl-tegra.h. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-hv: Integer. Select high-voltage receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,drive-type: Integer. Valid range 0...3. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. -- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVDN_SLWR" in the Tegra TRM. -- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVUP_SLWF" in the Tegra TRM. - -Valid values for pin and group names (nvidia,pin) are: - - Mux groups: - - These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property - that exists in those registers may be set for the following pin names. - - In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL - register. Where that is true, and property that exists in that register - may also be set on the following pin names. - - als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7, - aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1, - button_power_on_px5, button_slide_sw_py0, button_vol_down_px7, - button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1, - cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6, - cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in, - clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, - dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3, - dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4, - dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, - dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, - gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3, - gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, - gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck, - lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2, - lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1, - pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, - pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2, - pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4, - pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, - qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, - sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5, - sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0, - sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, - sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3, - spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7, - spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, - spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, - touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1, - uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0, - uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, - uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, - usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2 - - Drive groups: - - These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control) - registers. Note that where one of these registers controls a single pin - for which a PINMUX_AUX_* exists, see the list above for the pin name to - use when configuring the pinmux. - - pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, - pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4 - -Valid values for nvidia,functions are: - - aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb, - dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi, - i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, - pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, - sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4, - sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4, - vgp5, vgp6, vimclk, vimclk2 - -Example: - - pinmux: pinmux@70000800 { - compatible = "nvidia,tegra210-pinmux"; - reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */ - <0x0 0x70003000 0x0 0x1000>; /* Mux registers */ - - pinctrl-names = "boot"; - pinctrl-0 = <&state_boot>; - - state_boot: pinmux { - gen1_i2c_scl_pj1 { - nvidia,pins = "gen1_i2c_scl_pj1", - nvidia,function = "i2c1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; - nvidia,io-hv = <TEGRA_PIN_ENABLE>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml new file mode 100644 index 000000000000..28ae2e6d0cbc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra210-pinmux + + reg: + items: + - description: APB_MISC_GP_*_PADCTRL register (pad control) + - description: PINMUX_AUX_* registers (pinmux) + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, + ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4, + bt_wake_ap_ph5, button_home_py1, button_power_on_px5, + button_slide_sw_py0, button_vol_down_px7, + button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, + cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0, + cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2, + cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5, + clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, + dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, + dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, + dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0, + dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4, + dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, + gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, + gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, + gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2, + gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, + jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, + lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0, + motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6, + pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, + pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, + pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, + pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2, + pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, + qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, + sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, + sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, + sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1, + sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, + sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, + spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, + spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5, + spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0, + spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, + touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, + uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, + uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3, + uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6, + uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, + usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, + wifi_wake_ap_ph2, + # drive groups + drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6, + drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4, + drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1, + drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4, + drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3, + drive_sdmmc4 ] + + nvidia,function: + enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, + displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, + i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b, + i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0, + pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, + sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, + spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd, + usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux: pinmux@70000800 { + compatible = "nvidia,tegra210-pinmux"; + reg = <0x700008d4 0x02a8>, /* Pad control registers */ + <0x70003000 0x1000>; /* Mux registers */ + + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt deleted file mode 100644 index 0e6354c11e6d..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt +++ /dev/null @@ -1,144 +0,0 @@ -NVIDIA Tegra30 pinmux controller - -The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding, -as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes -that binding as a baseline, and only documents the differences between the -two bindings. - -Required properties: -- compatible: "nvidia,tegra30-pinmux" -- reg: Should contain the register physical address and length for each of - the pad control and mux registers. - -Tegra30 adds the following optional properties for pin configuration subnodes: -- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. -- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. 0: no, 1: yes. -- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. - -As with Tegra20, see the Tegra TRM for complete details regarding which groups -support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, - nvidia,io-reset. - - clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3, - dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0, - gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5, - sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1, - uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, - lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2, - sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7, - lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, - lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3, - lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0, - gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, - gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, - gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, - gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4, - gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, - gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5, - uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2, - gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7, - vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, - vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3, - lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0, - dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5, - lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2, - ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, - ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, - dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, - kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, - kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, - kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, - kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, - kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1, - vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, - sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0, - pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, - lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4, - clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1, - spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6, - spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, - sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7, - sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4, - sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, - sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, - sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0, - cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, - cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4, - clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7, - pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, - pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5, - pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1, - clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr, - pwr_int_n. - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1, - dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg, - gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2, - uart3, uda, vi1. - -Valid values for nvidia,functions are: - - blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt, - dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2, - extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3, - i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand, - nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, - rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1, - spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta, - uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, - vi, vi_alt1, vi_alt2, vi_alt3 - -Example: - - pinctrl@70000000 { - compatible = "nvidia,tegra30-pinmux"; - reg = < 0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0 >; /* Mux registers */ - }; - -Example board file extract: - - pinctrl@70000000 { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml new file mode 100644 index 000000000000..c0eda7848767 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra30-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra30-pinmux + + reg: + items: + - description: pad control registers + - description: mux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, + dap2_sclk_pa3, dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, + sdmmc3_cmd_pa7, gmi_a17_pb0, gmi_a18_pb1, lcd_pwr0_pb2, + lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5, + sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, + lcd_pwr1_pc1, uart2_txd_pc2, uart2_rxd_pc3, + gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, lcd_pwr2_pc6, + gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, + lcd_dc1_pd2, sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, + vi_vsync_pd6, vi_hsync_pd7, lcd_d0_pe0, lcd_d1_pe1, + lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, lcd_d6_pe6, + lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, + lcd_d11_pf3, lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, + lcd_d15_pf7, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2, + gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6, + gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, + gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, + gmi_ad15_ph7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, + gmi_cs6_n_pi3, gmi_rst_n_pi4, gmi_iordy_pi5, gmi_cs7_n_pi6, + gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, gmi_cs1_n_pj2, + lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5, + uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, + gmi_cs4_n_pk2, gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, + spdif_in_pk6, gmi_a19_pk7, vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, + vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, vi_d8_pl6, vi_d9_pl7, + lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3, + lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, + dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, + lcd_cs0_n_pn4, lcd_sdout_pn5, lcd_dc0_pn6, hdmi_int_pn7, + ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2, + ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, + ulpi_data5_po6, ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, dap4_fs_pp4, dap4_din_pp5, + dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, + kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, + kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, + kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, + kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, kb_row13_ps5, + kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1, + vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, + gen2_i2c_sda_pt6, sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, jtag_rtck_pu7, pv0, pv1, pv2, pv3, ddc_scl_pv4, + ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, lcd_cs1_n_pw0, + lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4, + clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, + spi2_miso_px1, spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, + spi1_sck_px5, spi1_cs0_n_px6, spi1_miso_px7, ulpi_clk_py0, + ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, sdmmc1_dat3_py4, + sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7, + sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, + lcd_sck_pz4, sys_clk_req_pz5, pwr_i2c_scl_pz6, + pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, + sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, + sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, + sdmmc4_clk_pcc4, clk2_req_pcc5, pex_l2_rst_n_pcc6, + pex_l2_clkreq_n_pcc7, pex_l0_prsnt_n_pdd0, + pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, + pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5, + pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, + clk3_req_pee1, clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, + core_pwr_req, cpu_pwr_req, owr, pwr_int_n, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_cec, + drive_crt, drive_csus, drive_dap1, drive_dap2, drive_dap3, + drive_dap4, drive_dbg, drive_ddc, drive_dev3, drive_gma, + drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_gpv, drive_lcd1, drive_lcd2, + drive_owr, drive_sdio1, drive_sdio2, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_uda, drive_vi1 ] + + nvidia,function: + enum: [ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, + cpu_pwr_req, crt, dap, ddr, dev3, displaya, displayb, dtv, + extperiph1, extperiph2, extperiph3, gmi, gmi_alt, hda, hdcp, + hdmi, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, + i2s3, i2s4, invalid, kbc, mio, nand, nand_alt, owr, pcie, + pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, rsvd3, + rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, + spi1, spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, + trace, uarta, uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, + vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt2, vi_alt3 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + pinctrl@70000000 { + compatible = "nvidia,tegra30-pinmux"; + reg = <0x70000868 0x0d0>, /* Pad control registers */ + <0x70003000 0x3e0>; /* Mux registers */ + + pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt deleted file mode 100644 index 4023bad2fe39..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt +++ /dev/null @@ -1,72 +0,0 @@ -SEMTECH SX150x GPIO expander bindings - -Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and -../interrupt-controller/interrupts.txt for generic information regarding -pin controller, GPIO, and interrupt bindings. - -Required properties: -- compatible: should be one of : - "semtech,sx1501q", - "semtech,sx1502q", - "semtech,sx1503q", - "semtech,sx1504q", - "semtech,sx1505q", - "semtech,sx1506q", - "semtech,sx1507q", - "semtech,sx1508q", - "semtech,sx1509q". - -- reg: The I2C slave address for this device. - -- #gpio-cells: Should be 2. The first cell is the GPIO number and the - second cell is used to specify optional parameters: - bit 0: polarity (0: normal, 1: inverted) - -- gpio-controller: Marks the device as a GPIO controller. - -Optional properties : -- interrupts: Interrupt specifier for the controllers interrupt. - -- interrupt-controller: Marks the device as a interrupt controller. - -- semtech,probe-reset: Will trigger a reset of the GPIO expander on probe, - only for sx1507q, sx1508q and sx1509q - -The GPIO expander can optionally be used as an interrupt controller, in -which case it uses the default two cell specifier. - -Required properties for pin configuration sub-nodes: - - pins: List of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes: ----------------------------------------------------- - - bias-disable: disable any pin bias, except the OSCIO pin - - bias-pull-up: pull up the pin, except the OSCIO pin - - bias-pull-down: pull down the pin, except the OSCIO pin - - bias-pull-pin-default: use pin-default pull state, except the OSCIO pin - - drive-push-pull: drive actively high and low - - drive-open-drain: drive with open drain only for sx1507q, sx1508q and sx1509q and except the OSCIO pin - - output-low: set the pin to output mode with low level - - output-high: set the pin to output mode with high level - -Example: - - i2c0gpio-expander@20{ - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "semtech,sx1506q"; - reg = <0x20>; - interrupt-parent = <&gpio_1>; - interrupts = <16 0>; - - gpio-controller; - interrupt-controller; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio1_cfg_pins>; - - gpio1_cfg_pins: gpio1-cfg { - pins = "gpio1"; - bias-pull-up; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 931e5c190ead..93f231c7a3b4 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -7,11 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. IPQ6018 TLMM block maintainers: - - Sricharan R <sricharan@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - IPQ6018 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ6018 SoC. properties: compatible: @@ -20,36 +19,28 @@ properties: reg: maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true + "#gpio-cells": true + gpio-ranges: true - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES patternProperties: - '-pinmux$': - type: object + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq6018-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq6018-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq6018-tlmm-state: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -63,7 +54,7 @@ patternProperties: sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3 ] minItems: 1 - maxItems: 4 + maxItems: 16 function: description: @@ -72,12 +63,12 @@ patternProperties: enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, - atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, - blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp0_i2c, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp0_spi, blsp1_spi, blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, - blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + blsp0_uart, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, @@ -92,64 +83,48 @@ patternProperties: qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, - qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, - sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, - uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. + qdss_tracedata_a, qdss_tracedata_b, qpic_pad, reset_n, sd_card, + sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, + uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,ipq6018-pinctrl"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 80>; - - serial3-pinmux { - pins = "gpio44", "gpio45"; - function = "blsp2_uart"; - drive-strength = <8>; - bias-pull-down; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 80>; + + serial3-state { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt deleted file mode 100644 index 7b151894f5a0..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt +++ /dev/null @@ -1,181 +0,0 @@ -Qualcomm Technologies, Inc. IPQ8074 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -IPQ8074 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,ipq8074-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio69 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - atest_char, atest_char0, atest_char1, atest_char2, - atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, - audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, - audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, - blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, - blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, - blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, - blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, - blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, - cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en, - ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, - mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc, - mdio, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk, - pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync, - pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1, - pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, - qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, - qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, - qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, - qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, - qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, - qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, - qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a, - wci2b, wci2c, wci2d - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,ipq8074-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 70>; - interrupt-controller; - #interrupt-cells = <2>; - - uart2: uart2-default { - mux { - pins = "gpio23", "gpio24"; - function = "blsp4_uart1"; - }; - - rx { - pins = "gpio23"; - drive-strength = <4>; - bias-disable; - }; - - tx { - pins = "gpio24"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml new file mode 100644 index 000000000000..5687acaf19bf --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ8074 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC. + +properties: + compatible: + const: qcom,ipq8074-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 35 + + gpio-line-names: + maxItems: 70 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq8074-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq8074-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq8074-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-6][0-9]|70)$" + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, + audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, + blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, + blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, + blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, + blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, + blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0, + cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0, + led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2, + mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst, + pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, + pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, + pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b, + qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write, + tsens_max, wci2a, wci2b, wci2c, wci2d ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq8074-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 70>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <0x2>; + + serial4-state { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml index f7bd4be1739e..a0a12171b6d0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. MDM9607 TLMM block @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. MDM9607 TLMM block maintainers: - Konrad Dybcio <konrad.dybcio@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MDM9607 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -40,20 +38,20 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-mdm9607-tlmm-state" - patternProperties: ".*": $ref: "#/$defs/qcom-mdm9607-tlmm-state" -'$defs': +$defs: qcom-mdm9607-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -115,20 +113,19 @@ patternProperties: required: - pins - - function additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,mdm9607-tlmm"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 80>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,mdm9607-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 80>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt deleted file mode 100644 index d46973968873..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt +++ /dev/null @@ -1,161 +0,0 @@ -Qualcomm MDM9615 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MDM9615 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,mdm9615-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio87 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. - Valid values are: - gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart, - sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, - cdc_mclk - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,mdm9615-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 88>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - gsbi8_uart: gsbi8-uart { - mux { - pins = "gpio34", "gpio35"; - function = "gsbi8"; - }; - - tx { - pins = "gpio34"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio35"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml new file mode 100644 index 000000000000..a4f6e4c588f4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9615-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. MDM9615 TLMM block + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: Top Level Mode Multiplexer pin controller in Qualcomm MDM9615 SoC. + +$ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,mdm9615-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + '#gpio-cells': true + gpio-ranges: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-mdm9615-pinctrl-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-mdm9615-pinctrl-state" + additionalProperties: false + +$defs: + qcom-mdm9615-pinctrl-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-7][0-9]|8[0-7])$" + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart, + sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + output-high: true + output-low: true + input-enable: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,mdm9615-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 88>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + gsbi3-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + + gsbi5-i2c-state { + sda-pins { + pins = "gpio16"; + function = "gsbi5_i2c"; + drive-strength = <8>; + bias-disable; + }; + + scl-pins { + pins = "gpio17"; + function = "gsbi5_i2c"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index ab4a2b4cfda2..3b79f5be860b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8226 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MSM8226 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8226 SoC. properties: compatible: @@ -21,38 +20,32 @@ properties: description: Specifies the base address and size of the TLMM register space maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8226-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8226-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8226-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -71,65 +64,51 @@ patternProperties: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. + blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3, + wlan ] bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true + input-enable: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8226-pinctrl"; - reg = <0xfd510000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 117>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - - serial-pins { - pins = "gpio8", "gpio9"; - function = "blsp_uart3"; - drive-strength = <8>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8226-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + serial-state { + pins = "gpio8", "gpio9"; + function = "blsp_uart3"; + drive-strength = <8>; + bias-disable; }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt deleted file mode 100644 index f095209848c8..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt +++ /dev/null @@ -1,96 +0,0 @@ -Qualcomm MSM8660 TLMM block - -Required properties: -- compatible: "qcom,msm8660-pinctrl" -- reg: Should be the base address and length of the TLMM block. -- interrupts: Should be the parent IRQ of the TLMM block. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells : Should be two. - The first cell is the gpio pin number and the - second cell is used for optional parameters. -- gpio-ranges: see ../gpio/gpio.txt - -Optional properties: - -- gpio-reserved-ranges: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Qualcomm's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - - pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, - output-low, output-high. - -Non-empty subnodes must specify the 'pins' property. - -Valid values for pins are: - gpio0-gpio172, sdc3_clk, sdc3_cmd, sdc3_data sdc4_clk, sdc4_cmd, sdc4_data - -Valid values for function are: - gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, gp_clk_1b, - gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, - gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, - gsbi2_spi_cs3_n, gsbi3, gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, - gsbi4, gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, hdmi, i2s, - lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, sdc5, tsif1, tsif2, usb_fs1, - usb_fs1_oe_n, usb_fs2, usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,msm8660-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 173>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - pinctrl-names = "default"; - pinctrl-0 = <&gsbi12_uart>; - - gsbi12_uart: gsbi12-uart { - mux { - pins = "gpio117", "gpio118"; - function = "gsbi12"; - }; - - tx { - pins = "gpio118"; - drive-strength = <8>; - bias-disable; - }; - - rx { - pins = "gpio117"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml new file mode 100644 index 000000000000..ad0cad4694c0 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8660-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8660 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC. + +properties: + compatible: + const: qcom,msm8660-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 86 + + gpio-line-names: + maxItems: 173 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8660-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8660-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8660-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-2])$" + - enum: [ sdc3_clk, sdc3_cmd, sdc3_data, sdc4_clk, sdc4_cmd, sdc4_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, + gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, + gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, gsbi2_spi_cs3_n, gsbi3, + gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, gsbi4, + gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, + hdmi, i2s, lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, + sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2, + usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ] + + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@800000 { + compatible = "qcom,msm8660-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + gpio-ranges = <&tlmm 0 0 173>; + #gpio-cells = <2>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + gsbi3-i2c-state { + pins = "gpio43", "gpio44"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml index e03530091478..cc6d0c9c5100 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml @@ -10,8 +10,7 @@ maintainers: - Stephan Gerhold <stephan@gerhold.net> description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the MSM8909 platform. + Top Level Mode Multiplexer pin controller in Qualcomm MSM8909 SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -25,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -39,12 +38,13 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-msm8909-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-msm8909-tlmm-state" + additionalProperties: false $defs: qcom-msm8909-tlmm-state: @@ -52,7 +52,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -112,41 +112,40 @@ $defs: required: - pins - - function additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - - pinctrl@1000000 { - compatible = "qcom,msm8909-tlmm"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 117>; - interrupt-controller; - #interrupt-cells = <2>; - - gpio-wo-subnode-state { - pins = "gpio1"; - function = "gpio"; - }; - - uart-w-subnodes-state { - rx { - pins = "gpio4"; - function = "blsp_uart1"; - bias-pull-up; - }; - - tx { - pins = "gpio5"; - function = "blsp_uart1"; - bias-disable; - }; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@1000000 { + compatible = "qcom,msm8909-tlmm"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio4"; + function = "blsp_uart1"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio5"; + function = "blsp_uart1"; + bias-disable; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt deleted file mode 100644 index 3354a63296d9..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt +++ /dev/null @@ -1,195 +0,0 @@ -Qualcomm MSM8916 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8916 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8916-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio121, - sdc1_clk, - sdc1_cmd, - sdc1_data - sdc2_clk, - sdc2_cmd, - sdc2_data, - qdsd_cmd, - qdsd_data0, - qdsd_data1, - qdsd_data2, - qdsd_data3 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, - atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0, - atest_gpsadc1, atest_tsens, atest_wlan0, atest_wlan1, backlight_en, - bimc_dte0,bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, - blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, - blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, - blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, - blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, - cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, - display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, - ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, - gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, gsm0_tx1, - gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, ldo_en, - ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, nav_pps, nav_tsync, - pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc, - pwr_crypto_enabled_a, pwr_crypto_enabled_b, pwr_modem_enabled_a, - pwr_modem_enabled_b, pwr_nav_enabled_a, pwr_nav_enabled_b, - qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, qdss_ctitrig_in_b0, - qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1, - qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a, - qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, - qdss_tracedata_b, reset_n, sd_card, sd_write, sec_mi2s, smb_int, - ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, - wcss_wlan, webcam1_rst - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8916-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <0 208 0>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 122>; - interrupt-controller; - #interrupt-cells = <2>; - - uart2: uart2-default { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - - tx { - pins = "gpio4"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml new file mode 100644 index 000000000000..5495f58905af --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8916-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8916 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC. + +properties: + compatible: + const: qcom,msm8916-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 61 + + gpio-line-names: + maxItems: 122 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8916-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8916-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8916-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[01])$" + - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, + atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens, + atest_wlan0, atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, + blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, + blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, + blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, + blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_uart1, + blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, cam1_standby, + cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, + display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, + euro_us, ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, + gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, + gsm0_tx0, gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, + kpsns1, kpsns2, ldo_en, ldo_update, mag_int, mdp_vsync, + modem_tsync, m_voc, nav_pps, nav_tsync, pa_indicator, pbs0, + pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc, + pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, + qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, reset_n, + sd_card, sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, + uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, + webcam1_rst ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + msmgpio: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml index d4da558cde54..c9a4a79e8d01 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8953 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MSM8953 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8953 SoC. properties: compatible: @@ -20,38 +19,30 @@ properties: reg: maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - gpio-reserved-ranges: true + "#gpio-cells": true + gpio-ranges: true - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8953-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8953-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8953-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -113,60 +104,44 @@ patternProperties: uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan, wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8953-pinctrl"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 142>; - - serial_default: serial-pins { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - drive-strength = <2>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8953-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 142>; + + serial_default: serial-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt deleted file mode 100644 index a7dd213c77c6..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt +++ /dev/null @@ -1,190 +0,0 @@ -Qualcomm MSM8960 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8960 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8960-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio151, - sdc1_clk, - sdc1_cmd, - sdc1_data - sdc3_clk, - sdc3_cmd, - sdc3_data - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2, - codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking, - gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a, - gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, - gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio, - gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, - gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, - gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l, - gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l, - gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, - gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, - gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, - gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data, - hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s, - pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5, - slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps, - ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc, - usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe, - usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b, - vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b, - vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c, - vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a, - vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a, - vfe_camif_timer7_b, vfe_camif_timer7_c, wlan - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,msm8960-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 152>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - gsbi8_uart: gsbi8-uart { - mux { - pins = "gpio34", "gpio35"; - function = "gsbi8"; - }; - - tx { - pins = "gpio34"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio35"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml new file mode 100644 index 000000000000..33d07d531273 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8960-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8960 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC. + +properties: + compatible: + const: qcom,msm8960-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 76 + + gpio-line-names: + maxItems: 152 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8960-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8960-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8960-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-1])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd, + sdc3_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2, + codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking, + gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, gp_pdm_0b, + gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gsbi1, + gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, + gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, + gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l, + gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l, + gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, + gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, gsbi11_spi_cs2a_n, + gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, gsbi12, hdmi_cec, + hdmi_ddc_clock, hdmi_ddc_data, hdmi_hot_plug_detect, hsic, + mdp_vsync, mi2s, mic_i2s, pmb_clk, pmb_ext_ctrl, ps_hold, + rpm_wdog, sdc2, sdc4, sdc5, slimbus1, slimbus2, spkr_i2s, + ssbi1, ssbi2, ssbi_ext_gps, ssbi_pmic2, ssbi_qpa1, ssbi_ts, + tsif1, tsif2, ts_eoc, usb_fs1, usb_fs1_oe, usb_fs1_oe_n, + usb_fs2, usb_fs2_oe, usb_fs2_oe_n, vfe_camif_timer1_a, + vfe_camif_timer1_b, vfe_camif_timer2, vfe_camif_timer3_a, + vfe_camif_timer3_b, vfe_camif_timer4_a, vfe_camif_timer4_b, + vfe_camif_timer4_c, vfe_camif_timer5_a, vfe_camif_timer5_b, + vfe_camif_timer6_a, vfe_camif_timer6_b, vfe_camif_timer6_c, + vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c, + wlan ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + reg = <0x800000 0x4000>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + spi1-default-state { + mosi-pins { + pins = "gpio6"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + miso-pins { + pins = "gpio7"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk-pins { + pins = "gpio9"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt deleted file mode 100644 index 004056506679..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt +++ /dev/null @@ -1,121 +0,0 @@ -Qualcomm MSM8974 TLMM block - -Required properties: -- compatible: "qcom,msm8974-pinctrl" -- reg: Should be the base address and length of the TLMM block. -- interrupts: Should be the parent IRQ of the TLMM block. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells : Should be two. - The first cell is the gpio pin number and the - second cell is used for optional parameters. -- gpio-ranges: see ../gpio/gpio.txt - -Optional properties: - -- gpio-reserved-ranges: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Qualcomm's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength. - -Non-empty subnodes must specify the 'pins' property. -Note that not all properties are valid for all pins. - - -Valid values for pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data - Supports bias and drive-strength - - hsic_data, hsic_strobe - Supports only mux - -Valid values for function are: - cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm, - blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, - blsp_uim2, blsp_uart2, blsp_i2c2, blsp_spi2, - blsp_uim3, blsp_uart3, blsp_i2c3, blsp_spi3, - blsp_uim4, blsp_uart4, blsp_i2c4, blsp_spi4, - blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5, - blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, - blsp_uim7, blsp_uart7, blsp_i2c7, blsp_spi7, - blsp_uim8, blsp_uart8, blsp_i2c8, blsp_spi8, - blsp_uim9, blsp_uart9, blsp_i2c9, blsp_spi9, - blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10, - blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, - blsp_uim12, blsp_uart12, blsp_i2c12, blsp_spi12, - blsp_spi1_cs1, blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2 - blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, - sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0, cci_timer1, - cci_timer2, cci_timer3, cci_async_in0, cci_async_in1, cci_async_in2, - cam_mckl0, cam_mclk1, cam_mclk2, cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, - hdmi_hpd, edp_hpd, gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, - gp_mn, tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, spkr_mi2s, - ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl, gpio - - (Note that this is not yet the complete list of functions) - - - -Example: - - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 146>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 208 0>; - - pinctrl-names = "default"; - pinctrl-0 = <&uart2_default>; - - uart2_default: uart2_default { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - - tx { - pins = "gpio4"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml new file mode 100644 index 000000000000..9287cbbff711 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8974-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8974 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC. + +properties: + compatible: + const: qcom,msm8974-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 73 + + gpio-line-names: + maxItems: 146 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8974-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8974-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8974-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$" + - enum: [ hsic_data, hsic_strobe, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm, + blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, blsp_uim2, + blsp_uart2, blsp_i2c2, blsp_spi2, blsp_uim3, blsp_uart3, + blsp_i2c3, blsp_spi3, blsp_uim4, blsp_uart4, blsp_i2c4, + blsp_spi4, blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5, + blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, blsp_uim7, + blsp_uart7, blsp_i2c7, blsp_spi7, blsp_uim8, blsp_uart8, + blsp_i2c8, blsp_spi8, blsp_uim9, blsp_uart9, blsp_i2c9, + blsp_spi9, blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10, + blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, blsp_uim12, + blsp_uart12, blsp_i2c12, blsp_spi12, blsp_spi1_cs1, + blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2 + blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, + sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0, + cci_timer1, cci_timer2, cci_timer3, cci_async_in0, + cci_async_in1, cci_async_in2, cam_mckl0, cam_mclk1, cam_mclk2, + cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd, + gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn, + tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, + spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + allOf: + - if: + properties: + pins: + contains: + enum: + - hsic_data + - hsic_strobe + required: + - pins + then: + properties: + bias-pull-down: false + bias-pull-up: false + bias-disable: false + drive-strength: false + input-enable: false + output-high: false + output-low: false + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + blsp2-uart1-sleep-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hsic-state { + pins = "hsic_data", "hsic_strobe"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt deleted file mode 100644 index 70d04d12f136..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt +++ /dev/null @@ -1,183 +0,0 @@ -Qualcomm MSM8976 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8956 and MSM8976 platforms. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8976-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, - sdc2_clk, sdc2_cmd, sdc2_data, - sdc3_clk, sdc3_cmd, sdc3_data - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2, - blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3, - qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b, - blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5, - qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a, - qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b, - blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a, - sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi, - blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a, - uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset, - uim1_present, uim2_data, uim2_clk, uim2_reset, - uim2_present, ts_xvdd, mipi_dsi0, us_euro, ts_resout, - ts_sample, sec_mi2s_mclk_b, pri_mi2s, codec_reset, - cdc_pdm0, us_emitter, pri_mi2s_mclk_b, pri_mi2s_mclk_c, - lpass_slimbus, lpass_slimbus0, lpass_slimbus1, codec_int1, - codec_int2, wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, - wcss_wlan0, wcss_wlan, wcss_fm, key_volp, key_snapshot, - key_focus, key_home, pwr_down, dmic0_clk, hdmi_int, - dmic0_data, wsa_vi, wsa_en, blsp_spi8, wsa_irq, blsp_i2c8, - pa_indicator, modem_tsync, ssbi_wtr1, gsm1_tx, gsm0_tx, - sdcard_det, sec_mi2s, ss_switch, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8976-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 145>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_active: blsp1_uart2_active { - mux { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml new file mode 100644 index 000000000000..858f45710fe2 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8976-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8976 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC. + +properties: + compatible: + const: qcom,msm8976-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 73 + + gpio-line-names: + maxItems: 145 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8976-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8976-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8976-tlmm-state: + type: object + description: + Desired pin configuration for a device or its specific state (like sleep + or active). + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this state. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-4])$" + - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2, + blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3, + qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b, + blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5, + qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a, + qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b, + blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a, + sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi, + blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a, + uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset, + uim1_present, uim2_data, uim2_clk, uim2_reset, uim2_present, + ts_xvdd, mipi_dsi0, us_euro, ts_resout, ts_sample, + sec_mi2s_mclk_b, pri_mi2s, codec_reset, cdc_pdm0, us_emitter, + pri_mi2s_mclk_b, pri_mi2s_mclk_c, lpass_slimbus, + lpass_slimbus0, lpass_slimbus1, codec_int1, codec_int2, + wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, wcss_wlan0, wcss_wlan, + wcss_fm, key_volp, key_snapshot, key_focus, key_home, pwr_down, + dmic0_clk, hdmi_int, dmic0_data, wsa_vi, wsa_en, blsp_spi8, + wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1, + gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8976-pinctrl"; + reg = <0x1000000 0x300000>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 145>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-active-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt deleted file mode 100644 index da52df6273bc..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt +++ /dev/null @@ -1,186 +0,0 @@ -Qualcomm MSM8994 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8994 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain one of: - "qcom,msm8992-pinctrl", - "qcom,msm8994-pinctrl". - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc1_rclk, sdc2_clk, - sdc2_cmd, sdc2_data - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, - blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, - blsp_i2c12, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, - blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, - blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, - blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, blsp_spi11, - blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, - blsp_uart6, blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, - blsp_uart12, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, - blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11, - blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, blsp11_uart_rx_b, - blsp11_uart_tx_b, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3, - cci_async_in0, cci_async_in1, cci_async_in2, cci_i2c0, cci_i2c1, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, - gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, - gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, - gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, hdmi_rcv, - mdp_vsync, mss_lte, nav_pps, nav_tsync, qdss_cti_trig_in_a, - qdss_cti_trig_in_b, qdss_cti_trig_in_c, qdss_cti_trig_in_d, - qdss_cti_trig_out_a, qdss_cti_trig_out_b, qdss_cti_trig_out_c, - qdss_cti_trig_out_d, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, - qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, - pci_e1, pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1, - tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4, gpio - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 146>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml new file mode 100644 index 000000000000..55d5439c6c24 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8994 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC. + +properties: + compatible: + enum: + - qcom,msm8992-pinctrl + - qcom,msm8994-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8994-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8994-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8994-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3, + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, + blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, + blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, + blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, + blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, + blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, + blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, + blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, + blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, + blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, + blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, + blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, + blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1, + cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1, + cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a, + gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, + gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, + gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, + hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync, + qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c, + qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b, + qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1, + pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1, + tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-default-state { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + + blsp1-spi1-default-state { + default-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <10>; + bias-pull-down; + }; + + cs-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt deleted file mode 100644 index a56cb882830c..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ /dev/null @@ -1,208 +0,0 @@ -Qualcomm MSM8996 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8996 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8996-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, - bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, - qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, - dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, - blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, - mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, - atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, - cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, - pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, - qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, - qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, - atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, - atest_usb20, atest_char0, dac_calib10, qdss_stm10, - qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, - blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, - qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, - qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, - dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, - qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, - dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, - dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, - dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, - dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, - sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, - qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, - uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, - blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, - qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, - blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, - cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, - blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, - qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, - isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, - qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, - sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, - gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, - qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, - tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, - qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, - sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, - sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, - ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, - blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, - pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, - qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, - qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, - gpio - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1010000 { - compatible = "qcom,msm8996-pinctrl"; - reg = <0x01010000 0x300000>; - interrupts = <0 208 0>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 150>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - uart_console_active: uart_console_active { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart8"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml new file mode 100644 index 000000000000..8e1cd4ba1116 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8996-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8996 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8996 SoC. + +properties: + compatible: + const: qcom,msm8996-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8996-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8996-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8996-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, + atest_char, cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, + qdss_tracedata_b, pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, + atest_usb2, cci_i2c, qdss_stm3, dac_calib3, atest_usb23, + atest_char3, dac_calib4, qdss_stm2, atest_usb22, atest_char2, + qdss_stm1, dac_calib5, atest_usb21, atest_char1, dbg_out, + qdss_stm0, dac_calib6, atest_usb20, atest_char0, dac_calib10, + qdss_stm10, qdss_cti_trig_in_a, cci_timer4, blsp_spi6, + blsp_uart6, blsp_uim6, blsp2_spi, qdss_stm9, + qdss_cti_trig_out_a, dac_calib11, qdss_stm8, cci_timer0, + qdss_stm13, dac_calib7, cci_timer1, qdss_stm12, dac_calib8, + cci_timer2, blsp1_spi, qdss_stm11, dac_calib9, cci_timer3, + cci_async, dac_calib12, blsp_i2c6, qdss_tracectl_a, + dac_calib13, qdss_traceclk_a, dac_calib14, dac_calib15, + hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, dac_calib17, + hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, dac_calib19, + hdmi_hot, dac_calib20, dac_calib21, pci_e0, dac_calib22, + dac_calib23, dac_calib24, tsif1_sync, dac_calib25, sd_write, + tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti, + blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, uim3, + blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, + blsp_uart11, blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, + blsp_i2c11, cri_trng0, cri_trng1, cri_trng, qdss_stm18, + pri_mi2s, qdss_stm17, blsp_spi4, blsp_uart4, blsp_uim4, + qdss_stm16, qdss_stm15, blsp_i2c4, qdss_stm14, dac_calib26, + spkr_i2s, audio_ref, lpass_slimbus, isense_dbg, tsense_pwm1, + tsense_pwm2, btfm_slimbus, ter_mi2s, qdss_stm22, qdss_stm21, + qdss_stm20, qdss_stm19, gcc_gp1_clk_b, sec_mi2s, blsp_spi5, + blsp_uart5, blsp_uim5, gcc_gp2_clk_b, gcc_gp3_clk_b, blsp_i2c5, + blsp_spi12, blsp_uart12, blsp_uim12, qdss_stm25, qdss_stm31, + blsp_i2c12, qdss_stm30, qdss_stm29, tsif1_clk, qdss_stm28, + tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, qdss_traceclk_b, + tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, sdc4_clk, + qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, + blsp11_uart_rx_b, blsp11_i2c_sda_b, prng_rosc, + blsp11_i2c_scl_b, uim2, uim1, uim_batt, pci_e2, pa_indicator, + adsp_ext, ddr_bist, qdss_tracedata_11, qdss_tracedata_12, + modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2, + ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 150>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp1-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt deleted file mode 100644 index c4de930f2406..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt +++ /dev/null @@ -1,202 +0,0 @@ -Qualcomm MSM8998 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8998 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8998-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc2_clk, sdc2_cmd, sdc2_data - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0, - atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1, - atest_usb10, atest_usb11, atest_usb12, atest_usb13, - audio_ref, bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, - blsp10_spi_b, blsp11_i2c, blsp1_spi, blsp1_spi_a, - blsp1_spi_b, blsp2_spi, blsp9_spi, blsp_i2c1, blsp_i2c2, - blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, - blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, - blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, - blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10, - blsp_spi11, blsp_spi12, blsp_uart1_a, blsp_uart1_b, - blsp_uart2_a, blsp_uart2_b, blsp_uart3_a, blsp_uart3_b, - blsp_uart7_a, blsp_uart7_b, blsp_uart8, blsp_uart8_a, - blsp_uart8_b, blsp_uart9_a, blsp_uart9_b, blsp_uim1_a, - blsp_uim1_b, blsp_uim2_a, blsp_uim2_b, blsp_uim3_a, - blsp_uim3_b, blsp_uim7_a, blsp_uim7_b, blsp_uim8_a, - blsp_uim8_b, blsp_uim9_a, blsp_uim9_b, bt_reset, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, edp_hot, edp_lcd, - gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, gcc_gp3_a, - gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv, - isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus, - m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, - mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte, - nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag, - pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, - pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, - qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, - qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, - spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1, - tsense_pwm1, tsense_pwm2, tsif0, tsif1, - uim1_clk, uim1_data, uim1_present, - uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, - uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0, - vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1, - wlan2_adc0, wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@03400000 { - compatible = "qcom,msm8998-pinctrl"; - reg = <0x03400000 0xc00000>; - interrupts = <0 208 0>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - gpio-reserved-ranges = <0 4>, <81 4>; - interrupt-controller; - #interrupt-cells = <2>; - - uart_console_active: uart_console_active { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart8_a"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml new file mode 100644 index 000000000000..21ba32cc204a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8998-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8998 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC. + +properties: + compatible: + const: qcom,msm8998-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8998-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8998-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8998-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0, + atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1, + atest_usb10, atest_usb11, atest_usb12, atest_usb13, audio_ref, + bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, blsp10_spi_b, + blsp11_i2c, blsp1_spi, blsp1_spi_a, blsp1_spi_b, blsp2_spi, + blsp9_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, + blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, blsp_spi2, + blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, + blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, + blsp_uart1_a, blsp_uart1_b, blsp_uart2_a, blsp_uart2_b, + blsp_uart3_a, blsp_uart3_b, blsp_uart7_a, blsp_uart7_b, + blsp_uart8, blsp_uart8_a, blsp_uart8_b, blsp_uart9_a, + blsp_uart9_b, blsp_uim1_a, blsp_uim1_b, blsp_uim2_a, + blsp_uim2_b, blsp_uim3_a, blsp_uim3_b, blsp_uim7_a, + blsp_uim7_b, blsp_uim8_a, blsp_uim8_b, blsp_uim9_a, + blsp_uim9_b, bt_reset, btfm_slimbus, cam_mclk, cci_async, + cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + edp_hot, edp_lcd, gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, + gcc_gp3_a, gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv, + isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus, + m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte, + nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag, + pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, + pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, + qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, qlink_request, + qua_mi2s, sd_card, sd_write, sdc40, sdc41, sdc42, sdc43, + sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ssbi1, ssc_irq, + ter_mi2s, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, tsif0, + tsif1, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, + vsense_clkout, vsense_data0, vsense_data1, vsense_mode, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 150>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2-cd-state { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index df79274d0ec3..72cce38bc1ce 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -15,28 +15,29 @@ description: properties: compatible: - items: - - enum: - - qcom,pm8018-mpp - - qcom,pm8019-mpp - - qcom,pm8038-mpp - - qcom,pm8058-mpp - - qcom,pm8226-mpp - - qcom,pm8821-mpp - - qcom,pm8841-mpp - - qcom,pm8916-mpp - - qcom,pm8917-mpp - - qcom,pm8921-mpp - - qcom,pm8941-mpp - - qcom,pm8950-mpp - - qcom,pmi8950-mpp - - qcom,pm8994-mpp - - qcom,pma8084-mpp - - qcom,pmi8994-mpp - - - enum: - - qcom,spmi-mpp - - qcom,ssbi-mpp + oneOf: + - items: + - enum: + - qcom,pm8019-mpp + - qcom,pm8226-mpp + - qcom,pm8841-mpp + - qcom,pm8916-mpp + - qcom,pm8941-mpp + - qcom,pm8950-mpp + - qcom,pmi8950-mpp + - qcom,pm8994-mpp + - qcom,pma8084-mpp + - qcom,pmi8994-mpp + - const: qcom,spmi-mpp + - items: + - enum: + - qcom,pm8018-mpp + - qcom,pm8038-mpp + - qcom,pm8058-mpp + - qcom,pm8821-mpp + - qcom,pm8917-mpp + - qcom,pm8921-mpp + - const: qcom,ssbi-mpp reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml index 3f4f1c0360b5..adf64bfaa4ed 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. QCM2290 TLMM block @@ -10,8 +10,7 @@ maintainers: - Shawn Guo <shawn.guo@linaro.org> description: - This binding describes the Top Level Mode Multiplexer block found in the - QCM2290 platform. + Top Level Mode Multiplexer pin controller in Qualcomm QCM2290 SoC. properties: compatible: @@ -20,46 +19,30 @@ properties: reg: maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - + "#gpio-cells": true + gpio-ranges: true wakeup-parent: true -#PIN CONFIGURATION NODES patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-qcm2290-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-qcm2290-tlmm-state" + additionalProperties: false -'$defs': +$defs: qcom-qcm2290-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -96,20 +79,11 @@ patternProperties: uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1 ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: @@ -118,17 +92,11 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false @@ -146,19 +114,19 @@ examples: gpio-ranges = <&tlmm 0 0 127>; sdc2_on_state: sdc2-on-state { - clk { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt deleted file mode 100644 index a50e74684195..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt +++ /dev/null @@ -1,199 +0,0 @@ -Qualcomm QCS404 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -QCS404 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,qcs404-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south and east TLMM - tiles. - -- reg-names: - Usage: required - Value type: <stringlist> - Defintiion: names for the cells of reg, must contain "north", "south" - and "east". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio119 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, - sdc2_data - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, hdmi_tx, hdmi_ddc, blsp_uart_tx_a2, blsp_spi2, m_voc, - qdss_cti_trig_in_a0, blsp_uart_rx_a2, qdss_tracectl_a, - blsp_uart2, aud_cdc, blsp_i2c_sda_a2, qdss_tracedata_a, - blsp_i2c_scl_a2, qdss_tracectl_b, qdss_cti_trig_in_b0, - blsp_uart1, blsp_spi_mosi_a1, blsp_spi_miso_a1, - qdss_tracedata_b, blsp_i2c1, blsp_spi_cs_n_a1, gcc_plltest, - blsp_spi_clk_a1, rgb_data0, blsp_uart5, blsp_spi5, - adsp_ext, rgb_data1, prng_rosc, rgb_data2, blsp_i2c5, - gcc_gp1_clk_b, rgb_data3, gcc_gp2_clk_b, blsp_spi0, - blsp_uart0, gcc_gp3_clk_b, blsp_i2c0, qdss_traceclk_b, - pcie_clk, nfc_irq, blsp_spi4, nfc_dwl, audio_ts, rgb_data4, - spi_lcd, blsp_uart_tx_b2, gcc_gp3_clk_a, rgb_data5, - blsp_uart_rx_b2, blsp_i2c_sda_b2, blsp_i2c_scl_b2, - pwm_led11, i2s_3_data0_a, ebi2_lcd, i2s_3_data1_a, - i2s_3_data2_a, atest_char, pwm_led3, i2s_3_data3_a, - pwm_led4, i2s_4, ebi2_a, dsd_clk_b, pwm_led5, pwm_led6, - pwm_led7, pwm_led8, pwm_led24, spkr_dac0, blsp_i2c4, - pwm_led9, pwm_led10, spdifrx_opt, pwm_led12, pwm_led13, - pwm_led14, wlan1_adc1, rgb_data_b0, pwm_led15, - blsp_spi_mosi_b1, wlan1_adc0, rgb_data_b1, pwm_led16, - blsp_spi_miso_b1, qdss_cti_trig_out_b0, wlan2_adc1, - rgb_data_b2, pwm_led17, blsp_spi_cs_n_b1, wlan2_adc0, - rgb_data_b3, pwm_led18, blsp_spi_clk_b1, rgb_data_b4, - pwm_led19, ext_mclk1_b, qdss_traceclk_a, rgb_data_b5, - pwm_led20, atest_char3, i2s_3_sck_b, ldo_update, bimc_dte0, - rgb_hsync, pwm_led21, i2s_3_ws_b, dbg_out, rgb_vsync, - i2s_3_data0_b, ldo_en, hdmi_dtest, rgb_de, i2s_3_data1_b, - hdmi_lbk9, rgb_clk, atest_char1, i2s_3_data2_b, ebi_cdc, - hdmi_lbk8, rgb_mdp, atest_char0, i2s_3_data3_b, hdmi_lbk7, - rgb_data_b6, rgb_data_b7, hdmi_lbk6, rgmii_int, cri_trng1, - rgmii_wol, cri_trng0, gcc_tlmm, rgmii_ck, rgmii_tx, - hdmi_lbk5, hdmi_pixel, hdmi_rcv, hdmi_lbk4, rgmii_ctl, - ext_lpass, rgmii_rx, cri_trng, hdmi_lbk3, hdmi_lbk2, - qdss_cti_trig_out_b1, rgmii_mdio, hdmi_lbk1, rgmii_mdc, - hdmi_lbk0, ir_in, wsa_en, rgb_data6, rgb_data7, - atest_char2, ebi_ch0, blsp_uart3, blsp_spi3, sd_write, - blsp_i2c3, gcc_gp1_clk_a, qdss_cti_trig_in_b1, - gcc_gp2_clk_a, ext_mclk0, mclk_in1, i2s_1, dsd_clk_a, - qdss_cti_trig_in_a1, rgmi_dll1, pwm_led22, pwm_led23, - qdss_cti_trig_out_a0, rgmi_dll2, pwm_led1, - qdss_cti_trig_out_a1, pwm_led2, i2s_2, pll_bist, - ext_mclk1_a, mclk_in2, bimc_dte1, i2s_3_sck_a, i2s_3_ws_a - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,qcs404-pinctrl"; - reg = <0x01000000 0x200000>, - <0x01300000 0x200000>, - <0x07b00000 0x200000>; - reg-names = "south", "north", "east"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 120>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml new file mode 100644 index 000000000000..29d50c4a0034 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCS404 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC. + +properties: + compatible: + const: qcom,qcs404-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: south + - const: north + - const: east + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 120 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-qcs404-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-qcs404-tlmm-state" + additionalProperties: false + +$defs: + qcom-qcs404-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0, + bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2, + blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4, + blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1, + blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1, + blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1, + blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2, + blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng, + cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a, + ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a, + ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, + gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1, + hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6, + hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx, + i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a, + i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a, + i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a, + i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1, + mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist, + prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12, + pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17, + pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21, + pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5, + pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0, + rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5, + rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2, + rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6, + rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1, + rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc, + rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write, + spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, wsa_en ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,qcs404-pinctrl"; + reg = <0x01000000 0x200000>, + <0x01300000 0x200000>, + <0x07b00000 0x200000>; + reg-names = "south", "north", "east"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 120>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + + blsp1-i2c1-default-state { + pins = "gpio24", "gpio25"; + function = "blsp_i2c1"; + }; + + blsp1-i2c2-default-state { + sda-pins { + pins = "gpio19"; + function = "blsp_i2c_sda_a2"; + }; + + scl-pins { + pins = "gpio20"; + function = "blsp_i2c_scl_a2"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt deleted file mode 100644 index 6ffeac9801df..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt +++ /dev/null @@ -1,187 +0,0 @@ -Qualcomm Technologies, Inc. SC7180 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SC7180 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sc7180-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south and west - TLMM tiles - -- reg-names: - Usage: required - Value type: <prop-encoded-array> - Definition: names for the cells of reg, must contain "north", "south" - and "west". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio118 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0, - atest_char1, atest_char2, atest_char3, atest_tsens, - atest_tsens2, atest_usb1, atest_usb10, atest_usb11, - atest_usb12, atest_usb13, atest_usb2, atest_usb20, - atest_usb21, atest_usb22, atest_usb23, audio_ref, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, - cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, gcc_gp2, - gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx, - jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync, - mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, - mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, - PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss, - qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs, - qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03, - qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, - qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, - sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, - tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, - usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT, - vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, - wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3500000 { - compatible = "qcom,sc7180-pinctrl"; - reg = <0x3500000 0x300000>, - <0x3900000 0x300000>, - <0x3D00000 0x300000>; - reg-names = "west", "north", "south"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 119>; - gpio-reserved-ranges = <0 4>, <106 4>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml new file mode 100644 index 000000000000..b40f6dc6adae --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC. + +properties: + compatible: + const: qcom,sc7180-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: west + - const: north + - const: south + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 119 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7180-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7180-tlmm-state" + additionalProperties: false + +$defs: + qcom-sc7180-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_tsens, + atest_tsens2, atest_usb1, atest_usb10, atest_usb11, + atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, + cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx, + jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync, + mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, + mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST, + pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti, + qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data, + qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c, + qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12, + qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb, + sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1, + _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3500000 { + compatible = "qcom,sc7180-pinctrl"; + reg = <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 120>; + wakeup-parent = <&pdc>; + + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio117"; + function = "dp_hot"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { + spi-pins { + pins = "gpio53", "gpio54", "gpio55"; + function = "qup15"; + }; + + cs-pins { + pins = "gpio56"; + function = "gpio"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index 624e14f00790..f7ec8a4f664f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -4,15 +4,14 @@ $id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SC7280 SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SC7280 SoC. properties: compatible: @@ -24,12 +23,11 @@ properties: type: boolean reg: - minItems: 2 maxItems: 2 gpio-controller: true - '#gpio-cells': + "#gpio-cells": description: Specifying the pin number and flags, as defined in include/dt-bindings/gpio/gpio.h const: 2 @@ -37,9 +35,17 @@ properties: gpio-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7280-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7280-lpass-state" + additionalProperties: false + +$defs: + qcom-sc7280-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. @@ -83,13 +89,10 @@ patternProperties: 3: Reserved (No adjustments) bias-pull-down: true - bias-pull-up: true - + bias-bus-hold: true bias-disable: true - output-high: true - output-low: true required: @@ -102,7 +105,7 @@ required: - compatible - reg - gpio-controller - - '#gpio-cells' + - "#gpio-cells" - gpio-ranges additionalProperties: false @@ -116,4 +119,21 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 15>; + + dmic01-state { + dmic01-clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + dmic01-clk-sleep-pins { + pins = "gpio6"; + function = "dmic1_clk"; + }; + }; + + tx-swr-data-sleep-state { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml index ad3496784678..36502173cb79 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SC7280 TLMM block maintainers: - Bjorn Andersson <andersson@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SC7280 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC7280 SoC. properties: compatible: @@ -43,17 +42,26 @@ properties: maxItems: 1 gpio-line-names: - maxItems: 174 + maxItems: 175 wakeup-parent: true -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7280-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7280-tlmm-state" + additionalProperties: false + +$defs: + qcom-sc7280-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -62,7 +70,7 @@ patternProperties: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$" - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] minItems: 1 @@ -102,35 +110,18 @@ patternProperties: uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - + bias-bus-hold: true bias-disable: true - + drive-strength: true + input-enable: true output-high: true - output-low: true required: - pins - allOf: - - $ref: /schemas/pinctrl/pincfg-node.yaml - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$" - then: - required: - - function - additionalProperties: false allOf: @@ -162,7 +153,7 @@ examples: gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - qup_uart5_default: qup-uart5-pins { + qup_uart5_default: qup-uart5-state { pins = "gpio46", "gpio47"; function = "qup13"; drive-strength = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml index b98eeba2c530..24191d5f64ac 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SC8180X TLMM block @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SC8180X TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SC8180X platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC8180X SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,9 +24,9 @@ properties: reg-names: items: - - const: "west" - - const: "east" - - const: "south" + - const: west + - const: east + - const: south interrupts: true interrupt-controller: true @@ -47,7 +45,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sc8180x-tlmm-state" - patternProperties: @@ -55,12 +53,13 @@ patternProperties: $ref: "#/$defs/qcom-sc8180x-tlmm-state" additionalProperties: false -'$defs': +$defs: qcom-sc8180x-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -112,16 +111,6 @@ patternProperties: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml index 1f468303bb08..7d2589387e1a 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml @@ -4,15 +4,14 @@ $id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SC8280XP SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SC8280XP SoC. properties: compatible: @@ -35,7 +34,7 @@ properties: gpio-controller: true - '#gpio-cells': + "#gpio-cells": description: Specifying the pin number and flags, as defined in include/dt-bindings/gpio/gpio.h const: 2 @@ -43,9 +42,17 @@ properties: gpio-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc8280xp-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc8280xp-lpass-state" + additionalProperties: false + +$defs: + qcom-sc8280xp-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. @@ -58,7 +65,7 @@ patternProperties: List of gpio pins affected by the properties specified in this subnode. items: - pattern: "^gpio([0-1]|1[0-8]])$" + pattern: "^gpio([0-1]|1[0-8])$" function: enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data, @@ -112,7 +119,7 @@ required: - clocks - clock-names - gpio-controller - - '#gpio-cells' + - "#gpio-cells" - gpio-ranges additionalProperties: false @@ -130,4 +137,21 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpi_tlmm 0 0 18>; + + dmic01-state { + dmic01-clk-pins { + pins = "gpio16"; + function = "dmic1_clk"; + }; + + dmic01-clk-sleep-pins { + pins = "gpio16"; + function = "dmic1_clk"; + }; + }; + + tx-swr-data-sleep-state { + pins = "gpio0", "gpio1"; + function = "swr_tx_data"; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml index b9ab130cd558..4efde29c36a2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SC8280XP TLMM block @@ -10,8 +10,7 @@ maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> description: | - This binding describes the Top Level Mode Multiplexer block found in the - SC8280XP platform. + Top Level Mode Multiplexer pin controller in Qualcomm SC8280XP SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -25,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -39,7 +38,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sc8280xp-tlmm-state" - patternProperties: @@ -47,12 +46,13 @@ patternProperties: $ref: "#/$defs/qcom-sc8280xp-tlmm-state" additionalProperties: false -'$defs': +$defs: qcom-sc8280xp-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -113,16 +113,6 @@ patternProperties: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$" - then: - required: - - function - additionalProperties: false examples: @@ -139,8 +129,8 @@ examples: gpio-ranges = <&tlmm 0 0 230>; gpio-wo-subnode-state { - pins = "gpio1"; - function = "gpio"; + pins = "gpio1"; + function = "gpio"; }; uart-w-subnodes-state { diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml new file mode 100644 index 000000000000..bd4fd8404aa4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM630 and SDM660 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + enum: + - qcom,sdm630-pinctrl + - qcom,sdm660-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: south + - const: center + - const: north + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 57 + + gpio-line-names: + maxItems: 114 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm630-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm630-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm630-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, + atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, + atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0, + bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b, + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, + blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a, + blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, + blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, + blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, + isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, + mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, + nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem, + pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b, + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, + qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, + qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk, + qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3, + qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu, + ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout, + vsense_data0, vsense_data1, vsense_mode, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm630-pinctrl"; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_default: blsp2-uart1-active-state { + tx-rts-pins { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; + + cts-pins { + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt deleted file mode 100644 index be034d329e10..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +++ /dev/null @@ -1,191 +0,0 @@ -Qualcomm Technologies, Inc. SDM660 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SDM660 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm660-pinctrl" or - "qcom,sdm630-pinctrl". - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, center and south - TLMM tiles. - -- reg-names: - Usage: required - Value type: <stringlist> - Definition: names for the cells of reg, must contain "north", "center" - and "south". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: Specifies the mapping between gpio controller and - pin-controller pins. - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio113, - Supports mux, bias and drive-strength - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, - atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, - atest_tsens, atest_tsens2, atest_usb1, atest_usb10, - atest_usb11, atest_usb12, atest_usb13, atest_usb2, - atest_usb20, atest_usb21, atest_usb22, atest_usb23, - audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, - blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, - blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3, - blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5, - blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b, - blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2, - blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, - blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, - cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, - gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, - isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, - mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, - nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, - phase_flag1, phase_flag10, phase_flag11, phase_flag12, - phase_flag13, phase_flag14, phase_flag15, phase_flag16, - phase_flag17, phase_flag18, phase_flag19, phase_flag2, - phase_flag20, phase_flag21, phase_flag22, phase_flag23, - phase_flag24, phase_flag25, phase_flag26, phase_flag27, - phase_flag28, phase_flag29, phase_flag3, phase_flag30, - phase_flag31, phase_flag4, phase_flag5, phase_flag6, - phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, - pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, - pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, - qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, - qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, - qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, - qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, - qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2, - qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, - sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, - uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, - uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1, - vsense_clkout, vsense_data0, vsense_data1, vsense_mode, - wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3100000 { - compatible = "qcom,sdm660-pinctrl"; - reg = <0x3100000 0x200000>, - <0x3500000 0x200000>, - <0x3900000 0x200000>; - reg-names = "south", "center", "north"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 114>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml new file mode 100644 index 000000000000..7585117c0f06 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDM670 TLMM block + +maintainers: + - Richard Acayan <mailingradian@gmail.com> + +description: | + The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdm670-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm670-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm670-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm670-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update, + lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, + mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl, + pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable, + qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, + qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk, + sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, + tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk, + tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, + vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@3400000 { + compatible = "qcom,sdm670-tlmm"; + reg = <0x03400000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + + qup-i2c9-state { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt deleted file mode 100644 index 7462e3743c68..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt +++ /dev/null @@ -1,176 +0,0 @@ -Qualcomm SDM845 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SDM845 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm845-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, adsp_ext, agera_pll, atest_char, atest_tsens, - atest_tsens2, atest_usb1, atest_usb10, atest_usb11, - atest_usb12, atest_usb13, atest_usb2, atest_usb20, - atest_usb21, atest_usb22, atest_usb23, audio_ref, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, - ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, - gcc_gp2, gcc_gp3, jitter_bist, ldo_en, ldo_update, - lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, - mdp_vsync2, mdp_vsync3, mss_lte, nav_pps, pa_indicator, - pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl, - pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, - qdss, qlink_enable, qlink_request, qua_mi2s, qup0, qup1, - qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, qup4, - qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, - qspi_clk, qspi_cs, qspi_data, sd_write, sdc4_clk, sdc4_cmd, - sdc4_data, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu_ch0, - tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, - tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, - tsif2_clk, tsif2_data, tsif2_en, tsif2_error, tsif2_sync, - uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, - uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, - vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, - wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3400000 { - compatible = "qcom,sdm845-pinctrl"; - reg = <0x03400000 0xc00000>; - interrupts = <GIC_SPI 208 0>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - qup9_active: qup9-active { - mux { - pins = "gpio4", "gpio5"; - function = "qup9"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml new file mode 100644 index 000000000000..c9627777ceb3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm845-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdm845-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm845-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm845-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm845-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, + atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13, + atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23, + audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update, + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0, + pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable, + qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0, + qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, + qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, + sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu, + spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en, + tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@3400000 { + compatible = "qcom,sdm845-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc_intc>; + + cci0-default-state { + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; + }; + + cam0-default-state { + rst-pins { + pins = "gpio9"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio13"; + function = "cam_mclk"; + + drive-strength = <16>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml index a38090b14aab..a76117e41d93 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SDX55 TLMM block maintainers: - Vinod Koul <vkoul@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SDX55 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDX55 SoC. properties: compatible: @@ -21,38 +20,32 @@ properties: description: Specifies the base address and size of the TLMM register space maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdx55-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdx55-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdx55-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -96,62 +89,46 @@ patternProperties: uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac, vsense_trigger ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1f00000 { - compatible = "qcom,sdx55-pinctrl"; - reg = <0x0f100000 0x300000>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 108>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; - - serial-pins { - pins = "gpio8", "gpio9"; - function = "blsp_uart3"; - drive-strength = <8>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1f00000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 108>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + + serial-state { + pins = "gpio8", "gpio9"; + function = "blsp_uart3"; + drive-strength = <8>; + bias-disable; }; + }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml index cdfcf29dffee..2f53905260e6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SDX65 TLMM block @@ -10,8 +10,7 @@ maintainers: - Vamsi krishna Lanka <quic_vamslank@quicinc.com> description: - This binding describes the Top Level Mode Multiplexer block found in the - SDX65 platform. + Top Level Mode Multiplexer pin controller in Qualcomm SDX65 SoC. properties: compatible: @@ -20,44 +19,32 @@ properties: reg: maxItems: 1 - interrupts: - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sdx65-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-sdx65-tlmm-state" -'$defs': + additionalProperties: false + +$defs: qcom-sdx65-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -122,37 +109,24 @@ patternProperties: qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, gpio ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - - function additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false @@ -175,13 +149,13 @@ examples: }; uart-w-subnodes-state { - rx { + rx-pins { pins = "gpio4"; function = "blsp_uart1"; bias-pull-up; }; - tx { + tx-pins { pins = "gpio5"; function = "blsp_uart1"; bias-disable; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml index e39fbb36d8c1..164f24db8b2b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block @@ -10,15 +10,14 @@ maintainers: - Iskren Chernev <iskren.chernev@gmail.com> description: - This binding describes the Top Level Mode Multiplexer block found in the - SM4250/6115 platforms. + Top Level Mode Multiplexer pin controller in Qualcomm SM4250 and SM6115 + SoCs. properties: compatible: const: qcom,sm6115-tlmm reg: - minItems: 3 maxItems: 3 reg-names: @@ -27,35 +26,17 @@ properties: - const: south - const: east - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: true - wakeup-parent: true -#PIN CONFIGURATION NODES patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6115-tlmm-state" - patternProperties: @@ -63,12 +44,13 @@ patternProperties: $ref: "#/$defs/qcom-sm6115-tlmm-state" additionalProperties: false -'$defs': +$defs: qcom-sm6115-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -101,50 +83,25 @@ patternProperties: uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, elan1_adc1 ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$" - then: - required: - - function - additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - reg-names - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml index 5cb8b272cb7d..e1dd54a160d5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -1,19 +1,17 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM6125 TLMM block maintainers: - Martin Botka <martin.botka@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM6125 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6125 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -21,21 +19,20 @@ properties: const: qcom,sm6125-tlmm reg: - minItems: 3 maxItems: 3 reg-names: items: - - const: "west" - - const: "south" - - const: "east" + - const: west + - const: south + - const: east interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -47,7 +44,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6125-tlmm-state" - patternProperties: @@ -61,6 +58,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -112,16 +110,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml index 856b9c567ecb..41e3e0afc9a8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM6350 TLMM block @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM6350 TLMM block maintainers: - Konrad Dybcio <konrad.dybcio@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM6350 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6350 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -40,7 +38,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6350-tlmm-state" - patternProperties: @@ -54,6 +52,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -111,16 +110,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml index 025faf87d147..d54ebb2bd5a8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM6375 TLMM block maintainers: - Konrad Dybcio <konrad.dybcio@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM6375 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6375 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -40,7 +38,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6375-tlmm-state" - patternProperties: @@ -54,6 +52,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -120,16 +119,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt deleted file mode 100644 index fa37733e5102..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt +++ /dev/null @@ -1,190 +0,0 @@ -Qualcomm SM8150 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -QCS404 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sm8150-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south, west - and east TLMM tiles. - -- reg-names: - Usage: required - Value type: <prop-encoded-array> - Defintiion: names for the cells of reg, must contain "north", "south" - "west" and "east". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, - atest_char0, atest_char1, atest_char2, atest_char3, - audio_ref, atest_usb1, atest_usb2, atest_usb10, - atest_usb11, atest_usb12, atest_usb13, atest_usb20, - atest_usb21, atest_usb22, atest_usb2, atest_usb23, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, - cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, - ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, - emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist, - lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, - mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, - pa_indicator, pci_e0, phase_flag, pll_bypassnl, - pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws, - prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable, - qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s, - qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, - qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, - qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, - sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s, - tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, - tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, - usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, - wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3000000 { - compatible = "qcom,sm8150-pinctrl"; - reg = <0x03100000 0x300000>, - <0x03500000 0x300000>, - <0x03900000 0x300000>, - <0x03D00000 0x300000>; - reg-names = "west", "east", "north", "south"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - gpio-reserved-ranges = <0 4>, <126 4>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml new file mode 100644 index 000000000000..85adddbdee56 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8150-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC. + +properties: + compatible: + const: qcom,sm8150-pinctrl + + reg: + maxItems: 4 + + reg-names: + items: + - const: west + - const: east + - const: north + - const: south + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 88 + + gpio-line-names: + maxItems: 175 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8150-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8150-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8150-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, audio_ref, + atest_usb1, atest_usb2, atest_usb10, atest_usb11, atest_usb12, + atest_usb13, atest_usb20, atest_usb21, atest_usb22, atest_usb2, + atest_usb23, btfm_slimbus, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, emac_phy, emac_pps, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, + jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, + pci_e0, phase_flag, pll_bypassnl, pll_bist, pci_e1, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, + qlink_request, qlink_enable, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qua_mi2s, qup0, qup1, qup2, qup3, qup4, + qup5, qup6, qup7, qup8, qup9, qup10, qup11, qup12, qup13, + qup14, qup15, qup16, qup17, qup18, qup19, qup_l4, qup_l5, + qup_l6, rgmii, sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, + ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, usb2phy_ac, + usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, wmss_reset ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x03100000 0x300000>, + <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 176>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <6>; + bias-disable; + }; + + pcie1-default-state { + perst-pins { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index 06efb1382876..bd45faa3f078 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -4,22 +4,20 @@ $id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SM8250 SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8250 SoC. properties: compatible: const: qcom,sm8250-lpass-lpi-pinctrl reg: - minItems: 2 maxItems: 2 clocks: @@ -34,7 +32,7 @@ properties: gpio-controller: true - '#gpio-cells': + "#gpio-cells": description: Specifying the pin number and flags, as defined in include/dt-bindings/gpio/gpio.h const: 2 @@ -42,9 +40,17 @@ properties: gpio-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8250-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8250-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8250-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. @@ -88,13 +94,11 @@ patternProperties: 3: Reserved (No adjustments) bias-pull-down: true - bias-pull-up: true - + bias-bus-hold: true bias-disable: true - + input-enable: true output-high: true - output-low: true required: @@ -104,7 +108,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -112,7 +116,7 @@ required: - clocks - clock-names - gpio-controller - - '#gpio-cells' + - "#gpio-cells" - gpio-ranges additionalProperties: false @@ -130,4 +134,28 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpi_tlmm 0 0 14>; + + wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + }; + }; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index c44d02d28bc9..c80f3847ac08 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -9,133 +9,109 @@ title: Qualcomm Technologies, Inc. SM8250 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SM8250 platform. +description: + Top Level Mode Multiplexer pin controller in the Qualcomm SM8250 SoC. properties: compatible: const: qcom,sm8250-pinctrl reg: - minItems: 3 maxItems: 3 reg-names: items: - - const: "west" - - const: "south" - - const: "north" - - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 + - const: west + - const: south + - const: north + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + gpio-reserved-ranges: + minItems: 1 + maxItems: 90 - wakeup-parent: true + gpio-line-names: + maxItems: 180 -#PIN CONFIGURATION NODES patternProperties: - '^.*$': - if: - type: object - then: - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" - - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] - minItems: 1 - maxItems: 36 - - function: - description: - Specify the alternative function to be configured for the specified - pins. - - enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, - mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, - mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, - pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, - pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, - qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, - qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, - qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, - tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, - tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, - tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" - then: - required: - - function - - additionalProperties: false + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8250-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8250-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8250-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, + pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, + qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, + qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, + tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - reg-names - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false @@ -143,16 +119,16 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> pinctrl@1f00000 { - compatible = "qcom,sm8250-pinctrl"; - reg = <0x0f100000 0x300000>, - <0x0f500000 0x300000>, - <0x0f900000 0x300000>; - reg-names = "west", "south", "north"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 180>; - wakeup-parent = <&pdc>; + compatible = "qcom,sm8250-pinctrl"; + reg = <0x0f100000 0x300000>, + <0x0f500000 0x300000>, + <0x0f900000 0x300000>; + reg-names = "west", "south", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 180>; + wakeup-parent = <&pdc>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml index 6ae5571f60da..0b1e4aa5819e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM8350 TLMM block @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM8350 TLMM block maintainers: - Vinod Koul <vkoul@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM8350 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8350 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -40,7 +38,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm8350-tlmm-state" - patternProperties: @@ -54,6 +52,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -108,16 +107,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml index 3694795ec793..01a0a4a40ba5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml @@ -4,15 +4,14 @@ $id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SM8450 SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8450 SoC. properties: compatible: @@ -35,7 +34,7 @@ properties: gpio-controller: true - '#gpio-cells': + "#gpio-cells": description: Specifying the pin number and flags, as defined in include/dt-bindings/gpio/gpio.h const: 2 @@ -43,9 +42,17 @@ properties: gpio-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8450-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8450-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8450-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. @@ -58,7 +65,7 @@ patternProperties: List of gpio pins affected by the properties specified in this subnode. items: - pattern: "^gpio([0-9]|[1-2][0-9]])$" + pattern: "^gpio([0-9]|[1-2][0-9])$" function: enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data, @@ -114,7 +121,7 @@ required: - clocks - clock-names - gpio-controller - - '#gpio-cells' + - "#gpio-cells" - gpio-ranges additionalProperties: false @@ -132,4 +139,28 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpi_tlmm 0 0 23>; + + wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + }; + }; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml index 9cd97a467648..4a1d10d6c5e7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM8450 TLMM block @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SM8450 TLMM block maintainers: - Vinod Koul <vkoul@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM8450 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8450 SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -25,7 +24,7 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: @@ -35,7 +34,7 @@ properties: gpio-line-names: maxItems: 209 - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -46,7 +45,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm8450-tlmm-state" - patternProperties: @@ -60,6 +59,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -112,16 +112,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml index c88c8dcb69d9..e1354f0c64f8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml @@ -65,10 +65,6 @@ additionalProperties: true $defs: qcom-tlmm-state: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# - properties: drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] @@ -82,5 +78,21 @@ $defs: output-high: true output-low: true + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + - if: + properties: + pins: + items: + pattern: "^gpio" + then: + required: + - function + else: + properties: + function: false + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index b486f41df65f..d6539723f354 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -132,7 +132,7 @@ additionalProperties: description: Pin bank index. - minimum: 0 - maximum: 10 + maximum: 13 description: Mux 0 means GPIO and mux 1 to N means the specific device function. diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml new file mode 100644 index 000000000000..0719c03d6f4b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/semtech,sx1501q.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Semtech SX150x GPIO expander + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - semtech,sx1501q + - semtech,sx1502q + - semtech,sx1503q + - semtech,sx1504q + - semtech,sx1505q + - semtech,sx1506q + - semtech,sx1507q + - semtech,sx1508q + - semtech,sx1509q + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + '#gpio-cells': + const: 2 + + gpio-controller: true + + semtech,probe-reset: + description: Will trigger a reset of the GPIO expander on probe + type: boolean + +patternProperties: + '-cfg$': + type: object + properties: + pins: true + + bias-disable: true + bias-pull-up: true + bias-pull-down: true + bias-pull-pin-default: true + drive-push-pull: true + output-low: true + output-high: true + drive-open-drain: true + + required: + - pins + + allOf: + - $ref: "pincfg-node.yaml#" + - $ref: "pinmux-node.yaml#" + - if: + properties: + pins: + contains: + const: oscio + then: + properties: + bias-disable: false + bias-pull-up: false + bias-pull-down: false + bias-pull-pin-default: false + drive-open-drain: false + + additionalProperties: false + +required: + - compatible + - reg + - '#gpio-cells' + - gpio-controller + +allOf: + - $ref: "pinctrl.yaml#" + - if: + not: + properties: + compatible: + contains: + enum: + - semtech,sx1507q + - semtech,sx1508q + - semtech,sx1509q + then: + properties: + semtech,probe-reset: false + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1501q + - semtech,sx1504q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^gpio[0-3]$' + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1502q + - semtech,sx1505q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^gpio[0-7]$' + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1503q + - semtech,sx1506q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(gpio[0-9]|gpio1[0-5])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1507q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-3])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1508q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-7])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1509q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-9]|gpio1[0-5])$' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c@1000 { + reg = <0x1000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl@20 { + compatible = "semtech,sx1501q"; + reg = <0x20>; + + #gpio-cells = <2>; + #interrupt-cells = <2>; + + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + interrupt-controller; + + gpio1-cfg { + pins = "gpio1"; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 9d59208d83c1..eeb29b4ad4d1 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -34,7 +34,9 @@ properties: const: 1 ranges: true - pins-are-numbered: true + pins-are-numbered: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true hwlocks: true interrupts: @@ -206,7 +208,6 @@ required: - '#address-cells' - '#size-cells' - ranges - - pins-are-numbered additionalProperties: false @@ -220,7 +221,6 @@ examples: #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x40020000 0x3000>; - pins-are-numbered; gpioa: gpio@0 { gpio-controller; @@ -238,7 +238,6 @@ examples: #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x50020000 0x3000>; - pins-are-numbered; gpiob: gpio@1000 { gpio-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 1e2b9b627b12..2722dc7bb03d 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -274,10 +274,6 @@ patternProperties: slew-rate: enum: [0, 1] - output-enable: - description: - This will internally disable the tri-state for MIO pins. - drive-strength: description: Selects the drive strength for MIO pins, in mA. diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml index 58022ae7d5dd..dfdb8dfb6b65 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -81,6 +81,9 @@ properties: power-supply: true + power-domains: + maxItems: 1 + resets: description: | A number of phandles to resets that need to be asserted during diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 5b4eda919911..633d49884019 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -28,15 +28,18 @@ properties: - qcom,msm8998-rpmpd - qcom,qcm2290-rpmpd - qcom,qcs404-rpmpd + - qcom,qdu1000-rpmhpd - qcom,sa8540p-rpmhpd - qcom,sdm660-rpmpd - qcom,sc7180-rpmhpd - qcom,sc7280-rpmhpd - qcom,sc8180x-rpmhpd - qcom,sc8280xp-rpmhpd + - qcom,sdm670-rpmhpd - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd - qcom,sdx65-rpmhpd + - qcom,sm4250-rpmpd - qcom,sm6115-rpmpd - qcom,sm6125-rpmpd - qcom,sm6350-rpmhpd @@ -45,6 +48,7 @@ properties: - qcom,sm8250-rpmhpd - qcom,sm8350-rpmhpd - qcom,sm8450-rpmhpd + - qcom,sm8550-rpmhpd '#power-domain-cells': const: 1 diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml index b89b15a5bfa4..4c74cc78729e 100644 --- a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml @@ -26,6 +26,7 @@ properties: type: object description: OTG boost regulator. $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible @@ -39,7 +40,6 @@ examples: richtek,vinovp-microvolt = <14500000>; otg_vbus_regulator: usb-otg-vbus-regulator { - regulator-compatible = "usb-otg-vbus"; regulator-name = "usb-otg-vbus"; regulator-min-microvolt = <4425000>; regulator-max-microvolt = <5825000>; diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 4cc3cc7c50be..66e400f2a3a4 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -25,7 +25,9 @@ properties: - const: allwinner,sun8i-a83t-pwm - const: allwinner,sun8i-h3-pwm - items: - - const: allwinner,sun8i-v3s-pwm + - enum: + - allwinner,suniv-f1c100s-pwm + - allwinner,sun8i-v3s-pwm - const: allwinner,sun7i-a20-pwm - items: - const: allwinner,sun50i-a64-pwm diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml index c8577bdf6c94..3afe1480df52 100644 --- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml @@ -48,6 +48,7 @@ examples: cros-ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; + interrupts = <101 0>; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml index a7fae1772a81..cd8e9a8907f8 100644 --- a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml +++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml @@ -30,7 +30,9 @@ properties: maxItems: 1 "#pwm-cells": - const: 2 + enum: [2, 3] + description: + The only flag supported by the controller is PWM_POLARITY_INVERTED. microchip,sync-update-mask: description: | diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt deleted file mode 100644 index 74c41e34c3b6..000000000000 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ /dev/null @@ -1,77 +0,0 @@ -Tegra SoC PWFM controller - -Required properties: -- compatible: Must be: - - "nvidia,tegra20-pwm": for Tegra20 - - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30 - - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114 - - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124 - - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132 - - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210 - - "nvidia,tegra186-pwm": for Tegra186 - - "nvidia,tegra194-pwm": for Tegra194 -- reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of - the cells format. -- clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - pwm - -Optional properties: -============================ -In some of the interface like PWM based regulator device, it is required -to configure the pins differently in different states, especially in suspend -state of the system. The configuration of pin is provided via the pinctrl -DT node as detailed in the pinctrl DT binding document - Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -The PWM node will have following optional properties. -pinctrl-names: Pin state names. Must be "default" and "sleep". -pinctrl-0: phandle for the default/active state of pin configurations. -pinctrl-1: phandle for the sleep state of pin configurations. - -Example: - - pwm: pwm@7000a000 { - compatible = "nvidia,tegra20-pwm"; - reg = <0x7000a000 0x100>; - #pwm-cells = <2>; - clocks = <&tegra_car 17>; - resets = <&tegra_car 17>; - reset-names = "pwm"; - }; - - -Example with the pin configuration for suspend and resume: -========================================================= -Suppose pin PE7 (On Tegra210) interfaced with the regulator device and -it requires PWM output to be tristated when system enters suspend. -Following will be DT binding to achieve this: - -#include <dt-bindings/pinctrl/pinctrl-tegra.h> - - pinmux@700008d4 { - pwm_active_state: pwm_active_state { - pe7 { - nvidia,pins = "pe7"; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - }; - - pwm_sleep_state: pwm_sleep_state { - pe7 { - nvidia,pins = "pe7"; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - }; - }; - - pwm@7000a000 { - /* Mandatory PWM properties */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pwm_active_state>; - pinctrl-1 = <&pwm_sleep_state>; - }; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml new file mode 100644 index 000000000000..739d3155dd32 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/nvidia,tegra20-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra PWFM controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-pwm + - nvidia,tegra186-pwm + + - items: + - enum: + - nvidia,tegra30-pwm + - nvidia,tegra114-pwm + - nvidia,tegra124-pwm + - nvidia,tegra132-pwm + - nvidia,tegra210-pwm + - enum: + - nvidia,tegra20-pwm + + - items: + - const: nvidia,tegra194-pwm + - const: nvidia,tegra186-pwm + + - items: + - const: nvidia,tegra234-pwm + - const: nvidia,tegra194-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: pwm + + "#pwm-cells": + const: 2 + + pinctrl-names: + items: + - const: default + - const: sleep + + pinctrl-0: + description: configuration for the default/active state + + pinctrl-1: + description: configuration for the sleep state + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + items: + - description: phandle to the core power domain + +allOf: + - $ref: pwm.yaml + +required: + - compatible + - reg + - clocks + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA20_CLK_PWM>; + resets = <&tegra_car 17>; + reset-names = "pwm"; + }; diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml index 69e5402da761..0921f012c901 100644 --- a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml @@ -41,6 +41,7 @@ examples: reg = <0>; #address-cells = <1>; #size-cells = <0>; + interrupts = <99 0>; regulator@0 { compatible = "google,cros-ec-regulator"; diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml index ce0a4021ae7f..01b9775a92d1 100644 --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml @@ -26,6 +26,7 @@ properties: patternProperties: "^regulator-(ldo|sbb[0-2])$": $ref: "regulator.yaml#" + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml index 4d550ca396eb..35792a927b03 100644 --- a/Documentation/devicetree/bindings/regulator/max8660.yaml +++ b/Documentation/devicetree/bindings/regulator/max8660.yaml @@ -26,6 +26,7 @@ properties: patternProperties: "^regulator-.+$": $ref: "regulator.yaml#" + unevaluatedProperties: false additionalProperties: false @@ -43,31 +44,26 @@ examples: regulators { regulator-V3 { - regulator-compatible= "V3(DCDC)"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1800000>; }; regulator-V4 { - regulator-compatible= "V4(DCDC)"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1800000>; }; regulator-V5 { - regulator-compatible= "V5(LDO)"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2000000>; }; regulator-V6 { - regulator-compatible= "V6(LDO)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; regulator-V7 { - regulator-compatible= "V7(LDO)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml new file mode 100644 index 000000000000..6327bb2f6ee0 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml @@ -0,0 +1,294 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6357-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6357 Regulators + +maintainers: + - Chen Zhong <chen.zhong@mediatek.com> + - Fabien Parent <fabien.parent@linaro.org> + - Alexandre Mergnat <amergnat@baylibre.com> + +description: | + The MT6357 PMIC provides 5 BUCK and 29 LDO. + Regulators and nodes are named according to the regulator type: + - buck-<name> + - ldo-<name>. + MT6357 regulators node should be sub node of the MT6397 MFD node. + +patternProperties: + "^buck-v(core|modem|pa|proc|s1)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + - regulator-min-microvolt + - regulator-max-microvolt + + "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$": + type: object + $ref: fixed-regulator.yaml# + unevaluatedProperties: false + description: + Properties for single fixed LDO regulator. + + required: + - regulator-name + - regulator-min-microvolt + - regulator-max-microvolt + + "^ldo-v(efuse|ibr|ldo28|mch|cama|camd|cn33-bt|cn33-wifi)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + - regulator-min-microvolt + - regulator-max-microvolt + + "^ldo-v(xo22|emc|mc|sim1|sim2|sram-others|sram-proc|dram|usb33)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + - regulator-min-microvolt + - regulator-max-microvolt + +additionalProperties: false + +examples: + - | + pmic { + regulators { + mt6357_vproc_reg: buck-vproc { + regulator-name = "vproc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + mt6357_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + mt6357_vmodem_reg: buck-vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + }; + mt6357_vs1_reg: buck-vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2200000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + mt6357_vpa_reg: buck-vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-ramp-delay = <50000>; + regulator-enable-ramp-delay = <220>; + }; + mt6357_vfe28_reg: ldo-vfe28 { + compatible = "regulator-fixed"; + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vxo22_reg: ldo-vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2400000>; + regulator-enable-ramp-delay = <110>; + }; + mt6357_vrf18_reg: ldo-vrf18 { + compatible = "regulator-fixed"; + regulator-name = "vrf18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <110>; + }; + mt6357_vrf12_reg: ldo-vrf12 { + compatible = "regulator-fixed"; + regulator-name = "vrf12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <110>; + }; + mt6357_vefuse_reg: ldo-vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcn33_bt_reg: ldo-vcn33-bt { + regulator-name = "vcn33-bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcn33_wifi_reg: ldo-vcn33-wifi { + regulator-name = "vcn33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcn28_reg: ldo-vcn28 { + compatible = "regulator-fixed"; + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcn18_reg: ldo-vcn18 { + compatible = "regulator-fixed"; + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcama_reg: ldo-vcama { + regulator-name = "vcama"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcamd_reg: ldo-vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vcamio_reg: ldo-vcamio18 { + compatible = "regulator-fixed"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vldo28_reg: ldo-vldo28 { + regulator-name = "vldo28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vsram_others_reg: ldo-vsram-others { + regulator-name = "vsram-others"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + }; + mt6357_vsram_proc_reg: ldo-vsram-proc { + regulator-name = "vsram-proc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + }; + mt6357_vaux18_reg: ldo-vaux18 { + compatible = "regulator-fixed"; + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vaud28_reg: ldo-vaud28 { + compatible = "regulator-fixed"; + regulator-name = "vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vio28_reg: ldo-vio28 { + compatible = "regulator-fixed"; + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vio18_reg: ldo-vio18 { + compatible = "regulator-fixed"; + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + }; + mt6357_vdram_reg: ldo-vdram { + regulator-name = "vdram"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <3300>; + }; + mt6357_vmc_reg: ldo-vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + mt6357_vmch_reg: ldo-vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + mt6357_vemc_reg: ldo-vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + regulator-always-on; + }; + mt6357_vsim1_reg: ldo-vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vsim2_reg: ldo-vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + mt6357_vibr_reg: ldo-vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + mt6357_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml index a462d99a25cc..8a0931dc2f30 100644 --- a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml @@ -27,9 +27,11 @@ properties: patternProperties: "^buck[12]$": $ref: "regulator.yaml#" + unevaluatedProperties: false "^ldo[123567]$": $ref: "regulator.yaml#" + unevaluatedProperties: false required: - compatible @@ -44,7 +46,6 @@ examples: compatible = "mediatek,mt6360-regulator"; LDO_VIN3-supply = <&BUCK2>; buck1 { - regulator-compatible = "BUCK1"; regulator-name = "mt6360,buck1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -53,7 +54,6 @@ examples: MT6360_OPMODE_ULP>; }; BUCK2: buck2 { - regulator-compatible = "BUCK2"; regulator-name = "mt6360,buck2"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -62,7 +62,6 @@ examples: MT6360_OPMODE_ULP>; }; ldo6 { - regulator-compatible = "LDO6"; regulator-name = "mt6360,ldo6"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; @@ -70,7 +69,6 @@ examples: MT6360_OPMODE_LP>; }; ldo7 { - regulator-compatible = "LDO7"; regulator-name = "mt6360,ldo7"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; @@ -78,15 +76,13 @@ examples: MT6360_OPMODE_LP>; }; ldo1 { - regulator-compatible = "LDO1"; regulator-name = "mt6360,ldo1"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; regulator-allowed-modes = <MT6360_OPMODE_NORMAL MT6360_OPMODE_LP>; }; - ldo2 { - regulator-compatible = "LDO2"; + ldo2 { regulator-name = "mt6360,ldo2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -94,7 +90,6 @@ examples: MT6360_OPMODE_LP>; }; ldo3 { - regulator-compatible = "LDO3"; regulator-name = "mt6360,ldo3"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -102,7 +97,6 @@ examples: MT6360_OPMODE_LP>; }; ldo5 { - regulator-compatible = "LDO5"; regulator-name = "mt6360,ldo5"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3600000>; diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 90c3bda31c23..297a75069f60 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -47,6 +47,7 @@ description: | For PM8350, smps1 - smps12, ldo1 - ldo10 For PM8350C, smps1 - smps10, ldo1 - ldo13, bob For PM8450, smps1 - smps6, ldo1 - ldo4 + For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2 For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 For PMI8998, bob For PMR735A, smps1 - smps3, ldo1 - ldo7 @@ -70,6 +71,9 @@ properties: - qcom,pm8350-rpmh-regulators - qcom,pm8350c-rpmh-regulators - qcom,pm8450-rpmh-regulators + - qcom,pm8550-rpmh-regulators + - qcom,pm8550ve-rpmh-regulators + - qcom,pm8550vs-rpmh-regulators - qcom,pm8998-rpmh-regulators - qcom,pmg1110-rpmh-regulators - qcom,pmi8998-rpmh-regulators @@ -83,7 +87,7 @@ properties: RPMh resource name suffix used for the regulators found on this PMIC. $ref: /schemas/types.yaml#/definitions/string - enum: [a, b, c, d, e, f, h, k] + enum: [a, b, c, d, e, f, g, h, k] qcom,always-wait-for-ack: description: | @@ -107,7 +111,7 @@ properties: regulator-allow-set-load: ["regulator-allowed-modes"] patternProperties: - "^(smps|ldo|lvs)[0-9]+$": + "^(smps|ldo|lvs|bob)[0-9]+$": type: object $ref: "regulator.yaml#" description: smps/ldo regulator nodes(s). @@ -303,6 +307,24 @@ allOf: properties: compatible: enum: + - qcom,pm8550-rpmh-regulators + - qcom,pm8550ve-rpmh-regulators + - qcom,pm8550vs-rpmh-regulators + then: + properties: + vdd-l2-l13-l14-supply: true + vdd-l5-l16-supply: true + vdd-l6-l7-supply: true + vdd-l8-l9-supply: true + patternProperties: + "^vdd-l([1-4]|1[0-7])-supply$": true + "^vdd-s[1-6]-supply$": true + "^vdd-bob[1-2]-supply$": true + + - if: + properties: + compatible: + enum: - qcom,pm8998-rpmh-regulators then: properties: @@ -412,9 +434,8 @@ examples: regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; }; @@ -431,9 +452,8 @@ examples: bob { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3600000>; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_AUTO - RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_AUTO + RPMH_REGULATOR_MODE_HPM>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; }; }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index 961eed51912c..8c45f53212b1 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -71,6 +71,8 @@ description: For pmi8998, bob + For pmr735a, s1, s2, s3, l1, l2, l3, l4, l5, l6, l7 + For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13 @@ -98,6 +100,7 @@ properties: - qcom,rpm-pma8084-regulators - qcom,rpm-pmi8994-regulators - qcom,rpm-pmi8998-regulators + - qcom,rpm-pmr735a-regulators - qcom,rpm-pms405-regulators patternProperties: diff --git a/Documentation/devicetree/bindings/regulator/regulator-output.yaml b/Documentation/devicetree/bindings/regulator/regulator-output.yaml new file mode 100644 index 000000000000..078b37a1a71a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator-output.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/regulator/regulator-output.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator output connector + +maintainers: + - Zev Weiss <zev@bewilderbeest.net> + +description: | + This describes a power output connector supplied by a regulator, + such as a power outlet on a power distribution unit (PDU). The + connector may be standalone or merely one channel or set of pins + within a ganged physical connector carrying multiple independent + power outputs. + +properties: + compatible: + const: regulator-output + + vout-supply: + description: + Phandle of the regulator supplying the output. + +required: + - compatible + - vout-supply + +additionalProperties: false + +examples: + - | + output { + compatible = "regulator-output"; + vout-supply = <&output_reg>; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml new file mode 100644 index 000000000000..29f7d3d5d658 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6190.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6190 4-Switch BuckBoost controller + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT6190 is 4-Switch BuckBoost controller designed for converting input + voltage to output voltage that can be equal to, higher or lower than input + voltage. It operates with wide input voltage range from 4.5V to 36V, and + the output voltage can be set from 3V to 36V by external FB pin. It's commonly + used for the application like as BuckBoost bus supply, docking station and USB + power delivery product. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - richtek,rt6190 + + reg: + maxItems: 1 + + enable-gpios: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + regulator-allowed-modes: + description: | + buck allowed operating mode + 0: PSM mode (light load Power Saving Mode) + 1: FCCM mode (Forced-CCM mode) + maxItems: 2 + items: + enum: [0, 1] + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@2c { + compatible = "richtek,rt6190"; + reg = <0x2c>; + wakeup-source; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>; + regulator-name = "richtek,rt6190-buckboost"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <32000000>; + regulator-min-microamp = <306000>; + regulator-max-microamp = <12114000>; + regulator-allowed-modes = <0 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 90a7cabf58fe..83ad177a9043 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -28,17 +28,20 @@ properties: oneOf: - items: - enum: - - sifive,rocket0 + - andestech,ax45mp + - canaan,k210 - sifive,bullet0 - sifive,e5 - sifive,e7 - sifive,e71 - - sifive,u74-mc - - sifive,u54 - - sifive,u74 + - sifive,rocket0 - sifive,u5 + - sifive,u54 - sifive,u7 - - canaan,k210 + - sifive,u74 + - sifive,u74-mc + - thead,c906 + - thead,c910 - const: riscv - items: - enum: diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml index 5b36243fd674..5d3fcee52d59 100644 --- a/Documentation/devicetree/bindings/riscv/starfive.yaml +++ b/Documentation/devicetree/bindings/riscv/starfive.yaml @@ -19,7 +19,9 @@ properties: compatible: oneOf: - items: - - const: beagle,beaglev-starlight-jh7100-r0 + - enum: + - beagle,beaglev-starlight-jh7100-r0 + - starfive,visionfive-v1 - const: starfive,jh7100 additionalProperties: true diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index 30eaa62e1aed..74f75f669e77 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -32,6 +32,9 @@ properties: - fsl,imx8qm-lpuart - fsl,imx8dxl-lpuart - const: fsl,imx8qxp-lpuart + - items: + - const: fsl,imxrt1050-lpuart + - const: fsl,imxrt1170-lpuart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index d24e2bc444be..12e4b4260b40 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -30,6 +30,7 @@ Required properties in pwrap device node. "mediatek,mt8186-pwrap" for MT8186 SoCs "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs "mediatek,mt8195-pwrap" for MT8195 SoCs + "mediatek,mt8365-pwrap" for MT8365 SoCs "mediatek,mt8516-pwrap" for MT8516 SoCs - interrupts: IRQ for pwrap in SOC - reg-names: "pwrap" is required; "pwrap-bridge" is optional. @@ -39,6 +40,8 @@ Required properties in pwrap device node. - clock-names: Must include the following entries: "spi": SPI bus clock "wrap": Main module clock + "sys": Optional system module clock + "tmr": Optional timer module clock - clocks: Must contain an entry for each entry in clock-names. Optional properities: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index a4eeb7e158e5..98d087cf4fc0 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -28,12 +28,14 @@ properties: - qcom,sc7180-aoss-qmp - qcom,sc7280-aoss-qmp - qcom,sc8180x-aoss-qmp + - qcom,sc8280xp-aoss-qmp - qcom,sdm845-aoss-qmp - qcom,sm6350-aoss-qmp - qcom,sm8150-aoss-qmp - qcom,sm8250-aoss-qmp - qcom,sm8350-aoss-qmp - qcom,sm8450-aoss-qmp + - qcom,sm8550-aoss-qmp - const: qcom,aoss-qmp reg: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml new file mode 100644 index 000000000000..290555426c39 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APR/GPR services shared parts + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic + Packet Router). + +properties: + reg: + minimum: 1 + maximum: 13 + description: | + APR Service ID + 3 = DSP Core Service + 4 = Audio Front End Service. + 5 = Voice Stream Manager Service. + 6 = Voice processing manager. + 7 = Audio Stream Manager Service. + 8 = Audio Device Manager Service. + 9 = Multimode voice manager. + 10 = Core voice stream. + 11 = Core voice processor. + 12 = Ultrasound stream manager. + 13 = Listen stream manager. + GPR Service ID + 1 = Audio Process Manager Service + 2 = Proxy Resource Manager Service. + 3 = AMDB Service. + 4 = Voice processing manager. + + qcom,protection-domain: + $ref: /schemas/types.yaml#/definitions/string-array + description: | + Protection domain service name and path for APR service + possible values are:: + "avs/audio", "msm/adsp/audio_pd". + "kernel/elf_loader", "msm/modem/wlan_pd". + "tms/servreg", "msm/adsp/audio_pd". + "tms/servreg", "msm/modem/wlan_pd". + "tms/servreg", "msm/slpi/sensor_pd". + +required: + - reg + - qcom,protection-domain + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml index f47491aab3b1..a6bc3197d5dd 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml @@ -17,6 +17,7 @@ description: | properties: compatible: enum: + - qcom,apr - qcom,apr-v2 - qcom,gpr @@ -58,8 +59,7 @@ properties: qcom,glink-channels: $ref: /schemas/types.yaml#/definitions/string-array description: Channel name used for the communication - items: - - const: apr_audio_svc + maxItems: 1 qcom,intents: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -81,12 +81,13 @@ properties: '#size-cells': const: 0 -#APR/GPR Services patternProperties: "^service@[1-9a-d]$": type: object + $ref: /schemas/soc/qcom/qcom,apr-services.yaml + additionalProperties: true description: - APR/GPR node's client devices use subnodes for desired static port services. + APR/GPR static port services. properties: compatible: @@ -98,99 +99,6 @@ patternProperties: - qcom,q6apm - qcom,q6prm - reg: - minimum: 1 - maximum: 13 - description: - APR Service ID - 3 = DSP Core Service - 4 = Audio Front End Service. - 5 = Voice Stream Manager Service. - 6 = Voice processing manager. - 7 = Audio Stream Manager Service. - 8 = Audio Device Manager Service. - 9 = Multimode voice manager. - 10 = Core voice stream. - 11 = Core voice processor. - 12 = Ultrasound stream manager. - 13 = Listen stream manager. - GPR Service ID - 1 = Audio Process Manager Service - 2 = Proxy Resource Manager Service. - 3 = AMDB Service. - 4 = Voice processing manager. - - clock-controller: - $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml# - description: Qualcomm DSP LPASS clock controller - unevaluatedProperties: false - - dais: - type: object - oneOf: - - $ref: /schemas/sound/qcom,q6apm-dai.yaml# - - $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml# - - $ref: /schemas/sound/qcom,q6asm-dais.yaml# - unevaluatedProperties: false - description: Qualcomm DSP audio ports - - routing: - type: object - $ref: /schemas/sound/qcom,q6adm-routing.yaml# - unevaluatedProperties: false - description: Qualcomm DSP LPASS audio routing - - qcom,protection-domain: - $ref: /schemas/types.yaml#/definitions/string-array - description: protection domain service name and path for apr service - possible values are - "avs/audio", "msm/adsp/audio_pd". - "kernel/elf_loader", "msm/modem/wlan_pd". - "tms/servreg", "msm/adsp/audio_pd". - "tms/servreg", "msm/modem/wlan_pd". - "tms/servreg", "msm/slpi/sensor_pd". - - allOf: - - if: - properties: - compatible: - enum: - - qcom,q6afe - then: - properties: - dais: - properties: - compatible: - const: qcom,q6afe-dais - - - if: - properties: - compatible: - enum: - - qcom,q6apm - then: - properties: - dais: - properties: - compatible: - enum: - - qcom,q6apm-dais - - qcom,q6apm-lpass-dais - - - if: - properties: - compatible: - enum: - - qcom,q6asm - then: - properties: - dais: - properties: - compatible: - const: qcom,q6asm-dais - - additionalProperties: false - required: - compatible - qcom,domain @@ -203,7 +111,15 @@ allOf: - qcom,gpr then: properties: + qcom,glink-channels: + items: + - const: adsp_apps power-domains: false + else: + properties: + qcom,glink-channels: + items: + - const: apr_audio_svc - if: required: @@ -227,31 +143,35 @@ examples: apr { compatible = "qcom,apr-v2"; qcom,domain = <APR_DOMAIN_ADSP>; + qcom,glink-channels = "apr_audio_svc"; + qcom,intents = <512 20>; #address-cells = <1>; #size-cells = <0>; q6core: service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - }; - - q6afe: service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - }; - - q6asm: service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; }; - q6adm: service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + + dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + /* ... */ + }; + /* ... */ }; }; @@ -260,12 +180,25 @@ examples: gpr { compatible = "qcom,gpr"; qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,glink-channels = "adsp_apps"; + qcom,intents = <512 20>; #address-cells = <1>; #size-cells = <0>; service@1 { - compatible = "qcom,q6apm"; - reg = <GPR_APM_MODULE_IID>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; }; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml index 4a50f1d27724..b246500d3d5d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -99,6 +99,9 @@ properties: - const: drv-2 - const: drv-3 + power-domains: + maxItems: 1 + bcm-voter: $ref: /schemas/interconnect/qcom,bcm-voter.yaml# @@ -151,6 +154,7 @@ examples: <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; }; - | @@ -197,6 +201,7 @@ examples: <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; clock-controller { compatible = "qcom,sm8350-rpmh-clk"; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index 09d5bfa920f2..11c0f4dd797c 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -4,7 +4,7 @@ $id: "http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Qualcomm Resource Power Manager (RPM) over SMD +title: Qualcomm Resource Power Manager (RPM) over SMD/GLINK description: | This driver is used to interface with the Resource Power Manager (RPM) found @@ -12,9 +12,9 @@ description: | to vote for state of the system resources, such as clocks, regulators and bus frequencies. - The SMD information for the RPM edge should be filled out. See qcom,smd.yaml - for the required edge properties. All SMD related properties will reside - within the RPM node itself. + The SMD or GLINK information for the RPM edge should be filled out. See + qcom,smd.yaml for the required edge properties. All SMD/GLINK related + properties will reside within the RPM node itself. The RPM exposes resources to its subnodes. The rpm_requests node must be present and this subnode may contain children that designate regulator @@ -45,6 +45,7 @@ properties: - qcom,rpm-sdm660 - qcom,rpm-sm6115 - qcom,rpm-sm6125 + - qcom,rpm-sm6375 - qcom,rpm-qcm2290 - qcom,rpm-qcs404 @@ -55,12 +56,23 @@ properties: power-controller: $ref: /schemas/power/qcom,rpmpd.yaml# + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the RPM communication + items: + - const: rpm_requests + qcom,smd-channels: $ref: /schemas/types.yaml#/definitions/string-array description: Channel name used for the RPM communication items: - const: rpm_requests +patternProperties: + "^regulators(-[01])?$": + $ref: /schemas/regulator/qcom,smd-rpm-regulator.yaml# + unevaluatedProperties: false + if: properties: compatible: @@ -69,10 +81,18 @@ if: - qcom,rpm-apq8084 - qcom,rpm-msm8916 - qcom,rpm-msm8974 + - qcom,rpm-msm8976 - qcom,rpm-msm8953 then: + properties: + qcom,glink-channels: false required: - qcom,smd-channels +else: + properties: + qcom,smd-channels: false + required: + - qcom,glink-channels required: - compatible diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml index 795bd8cd4104..58500529b90f 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -60,7 +60,7 @@ properties: Two identifiers of the inbound and outbound smem items used for this edge. patternProperties: - "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$": + "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap|wlan-ap-to-wpss|wlan-wpss-to-ap$": type: object description: Each SMP2P pair contain a set of inbound and outbound entries, these are diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml index f433e6e0a19f..38818c37c3ea 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml @@ -24,8 +24,11 @@ properties: - qcom,msm8998-silver-saw2-v4.1-l2 - qcom,msm8909-saw2-v3.0-cpu - qcom,msm8916-saw2-v3.0-cpu + - qcom,msm8939-saw2-v3.0-cpu - qcom,msm8226-saw2-v2.1-cpu - qcom,msm8974-saw2-v2.1-cpu + - qcom,msm8976-gold-saw2-v2.3-l2 + - qcom,msm8976-silver-saw2-v2.3-l2 - qcom,apq8084-saw2-v2.1-cpu - qcom,apq8064-saw2-v1.1-cpu - const: qcom,saw2 diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml new file mode 100644 index 000000000000..1cac3cb5226c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g011-sys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M System Configuration (SYS) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/V2M-alike SYS (System Configuration) controls the overall + configuration of the LSI and supports the following functions, + - Bank address settings for DMAC + - Bank address settings of the units for ICB + - ETHER AxCACHE[1] (C bit) control function + - RAMA initialization control + - MD[7:0] pin monitoring + - LSI version + - PCIe related settings + - WDT stop control + - Temperature sensor (TSU) monitor + +properties: + compatible: + const: renesas,r9a09g011-sys + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sys: system-controller@a3f03000 { + compatible = "renesas,r9a09g011-sys"; + reg = <0xa3f03000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index f51464a08aff..2789022b52eb 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/renesas.yaml# +$id: http://devicetree.org/schemas/soc/renesas/renesas.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas SH-Mobile, R-Mobile, and R-Car Platform @@ -431,11 +431,12 @@ properties: - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) - const: renesas,r9a06g032 - - description: RZ/G2UL (R9A07G043) + - description: RZ/Five and RZ/G2UL (R9A07G043) items: - enum: - renesas,smarc-evk # SMARC EVK - enum: + - renesas,r9a07g043f01 # RZ/Five - renesas,r9a07g043u11 # RZ/G2UL Type-1 - renesas,r9a07g043u12 # RZ/G2UL Type-2 - const: renesas,r9a07g043 diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml index 59f7c60a14ba..044bcd370d49 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml @@ -8,12 +8,15 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices ADAU1372 CODEC maintainers: - - Alexandre Belloni <alexandre.belloni@bootlin.om> + - Alexandre Belloni <alexandre.belloni@bootlin.com> description: | Analog Devices ADAU1372 four inputs and two outputs codec. https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1372.pdf +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -42,7 +45,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml index 847b83398d3d..dba3023a45e5 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml @@ -51,6 +51,7 @@ required: - AVDD-supply allOf: + - $ref: dai-common.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index fb78967ee17b..12f60507aed7 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -15,6 +15,9 @@ description: | standalone mode. https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7118.pdf +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -57,7 +60,7 @@ required: - iovdd-supply - dvdd-supply -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/ak4375.yaml b/Documentation/devicetree/bindings/sound/ak4375.yaml index 5f0fc584bb38..587598e122c6 100644 --- a/Documentation/devicetree/bindings/sound/ak4375.yaml +++ b/Documentation/devicetree/bindings/sound/ak4375.yaml @@ -9,6 +9,9 @@ title: AK4375 DAC and headphones amplifier maintainers: - Vincent Knecht <vincent.knecht@mailoo.org> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: asahi-kasei,ak4375 @@ -35,7 +38,7 @@ required: - avdd-supply - tvdd-supply -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/ak4613.yaml index aa8a258a9f1c..010574645e6a 100644 --- a/Documentation/devicetree/bindings/sound/ak4613.yaml +++ b/Documentation/devicetree/bindings/sound/ak4613.yaml @@ -9,6 +9,9 @@ title: AK4613 I2C transmitter maintainers: - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: asahi-kasei,ak4613 @@ -35,7 +38,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml index 48a5b2c3934e..437fe5d7cae1 100644 --- a/Documentation/devicetree/bindings/sound/ak4642.yaml +++ b/Documentation/devicetree/bindings/sound/ak4642.yaml @@ -9,6 +9,9 @@ title: AK4642 I2C transmitter maintainers: - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -37,7 +40,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index 292fcb643999..78273647f766 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -102,6 +102,7 @@ required: - dma-names allOf: + - $ref: dai-common.yaml# - if: properties: compatible: @@ -228,7 +229,7 @@ allOf: - Mic - Speaker -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index dd30881ad2f5..739114fb6549 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -61,6 +61,7 @@ properties: maxItems: 1 allOf: + - $ref: dai-common.yaml# - if: properties: compatible: @@ -128,7 +129,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml index 68c84e29ce57..8108c564dd78 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -54,6 +54,7 @@ properties: maxItems: 1 allOf: + - $ref: dai-common.yaml# - if: properties: compatible: @@ -104,7 +105,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml index 2f12cabe4c71..763b876047c1 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml @@ -9,9 +9,17 @@ title: Allwinner H6 DMIC maintainers: - Ban Tao <fengzheng923@gmail.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: - const: allwinner,sun50i-h6-dmic + oneOf: + - items: + - enum: + - allwinner,sun20i-d1-dmic + - const: allwinner,sun50i-h6-dmic + - const: allwinner,sun50i-h6-dmic "#sound-dai-cells": const: 0 @@ -54,7 +62,7 @@ required: - dma-names - resets -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml index 4eb11a8e622b..63eadc4200ac 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml @@ -10,6 +10,9 @@ maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> +allOf: + - $ref: dai-common.yaml# + properties: "#sound-dai-cells": minimum: 0 @@ -49,7 +52,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml index 0705f91199a0..6350dfc0a926 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml @@ -10,7 +10,7 @@ maintainers: - Jerome Brunet <jbrunet@baylibre.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml index 77469a45bb7a..23f82bb89750 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml @@ -10,7 +10,7 @@ maintainers: - Jerome Brunet <jbrunet@baylibre.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml index 580a3d040abc..5f5cccdbeb34 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml @@ -10,7 +10,7 @@ maintainers: - Jerome Brunet <jbrunet@baylibre.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/apple,mca.yaml b/Documentation/devicetree/bindings/sound/apple,mca.yaml index d5dc92b5b654..40e3a202f443 100644 --- a/Documentation/devicetree/bindings/sound/apple,mca.yaml +++ b/Documentation/devicetree/bindings/sound/apple,mca.yaml @@ -14,6 +14,9 @@ description: | maintainers: - Martin Povišer <povik+lin@cutebit.org> +allOf: + - $ref: dai-common.yaml# + properties: compatible: items: @@ -106,7 +109,7 @@ required: - power-domains - '#sound-dai-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml index dce86dafe382..bc6c6b172238 100644 --- a/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml +++ b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml @@ -15,7 +15,7 @@ description: function (primarily the power limit for the amplifier). allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml index 51d815d0c696..82062d80d700 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml @@ -146,6 +146,7 @@ required: - "#sound-dai-cells" allOf: + - $ref: dai-common.yaml# - if: properties: cirrus,boost-type: @@ -171,7 +172,7 @@ allOf: cirrus,gpio1-src-select: enum: [1] -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml index 184a1344ea76..88a0ca474c3d 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml @@ -14,6 +14,9 @@ description: | CS35L45 is a Boosted Mono Class D Amplifier with DSP Speaker Protection and Adaptive Battery Management. +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -52,7 +55,7 @@ required: - reg - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml index 963a871e74da..422cbf38bfdb 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -9,6 +9,9 @@ title: CS42L51 audio codec DT bindings maintainers: - Olivier Moysan <olivier.moysan@foss.st.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: cirrus,cs42l51 @@ -46,7 +49,7 @@ required: - reg - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml index cea612d3d4a7..52f024f5302a 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml @@ -24,6 +24,9 @@ description: | This binding must be part of the Lochnagar MFD binding: [1] ../mfd/cirrus,lochnagar.yaml +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -49,4 +52,4 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml index 23138ddcb62d..014d4eaa8793 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml @@ -22,6 +22,9 @@ description: | The properties are all contained in the parent MFD node. +allOf: + - $ref: dai-common.yaml# + properties: '#sound-dai-cells': description: diff --git a/Documentation/devicetree/bindings/sound/name-prefix.yaml b/Documentation/devicetree/bindings/sound/dai-common.yaml index 2fe57f87ac52..d858eea73ed7 100644 --- a/Documentation/devicetree/bindings/sound/name-prefix.yaml +++ b/Documentation/devicetree/bindings/sound/dai-common.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/name-prefix.yaml# +$id: http://devicetree.org/schemas/sound/dai-common.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Component sound name prefix +title: Digital Audio Interface Common Properties maintainers: - Jerome Brunet <jbrunet@baylibre.com> @@ -18,4 +18,6 @@ properties: sink/source names may use this property to prepend the name of their sinks/sources with the provided string. + '#sound-dai-cells': true + additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml index f46c66bc6b2d..7735e08d35ba 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml @@ -167,6 +167,7 @@ required: - interrupt-names allOf: + - $ref: dai-common.yaml# - if: properties: opmode: @@ -177,7 +178,7 @@ allOf: required: - tdm-slots -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/dmic-codec.yaml b/Documentation/devicetree/bindings/sound/dmic-codec.yaml new file mode 100644 index 000000000000..59ef0cf6b6e5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/dmic-codec.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/dmic-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic PDM Digital microphone (DMIC) codec + +maintainers: + - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: dmic-codec + + '#sound-dai-cells': + const: 0 + + dmicen-gpios: + description: GPIO specifier for DMIC to control start and stop + maxItems: 1 + + num-channels: + description: Number of microphones on this DAI + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 8 + default: 8 + + modeswitch-delay-ms: + description: Delay (in ms) to complete DMIC mode switch + + wakeup-delay-ms: + description: Delay (in ms) after enabling the DMIC + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dmic { + compatible = "dmic-codec"; + dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + num-channels = <1>; + wakeup-delay-ms = <50>; + modeswitch-delay-ms = <35>; + }; +... diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt deleted file mode 100644 index 32e871037269..000000000000 --- a/Documentation/devicetree/bindings/sound/dmic.txt +++ /dev/null @@ -1,22 +0,0 @@ -Device-Tree bindings for Digital microphone (DMIC) codec - -This device support generic PDM digital microphone. - -Required properties: - - compatible: should be "dmic-codec". - -Optional properties: - - dmicen-gpios: GPIO specifier for dmic to control start and stop - - num-channels: Number of microphones on this DAI - - wakeup-delay-ms: Delay (in ms) after enabling the DMIC - - modeswitch-delay-ms: Delay (in ms) to complete DMIC mode switch - -Example node: - - dmic_codec: dmic@0 { - compatible = "dmic-codec"; - dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; - num-channels = <1>; - wakeup-delay-ms <50>; - modeswitch-delay-ms <35>; - }; diff --git a/Documentation/devicetree/bindings/sound/everest,es8316.yaml b/Documentation/devicetree/bindings/sound/everest,es8316.yaml index 3b752bba748b..d9f8f0c7f6bb 100644 --- a/Documentation/devicetree/bindings/sound/everest,es8316.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es8316.yaml @@ -10,6 +10,9 @@ maintainers: - Daniel Drake <drake@endlessm.com> - Katsuhiro Suzuki <katsuhiro@katsuster.net> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: everest,es8316 @@ -33,7 +36,7 @@ required: - reg - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml index 64d57758ee67..4b99a18c79a0 100644 --- a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml @@ -18,6 +18,7 @@ properties: enum: - fsl,imx8mm-micfil - fsl,imx8mp-micfil + - fsl,imx93-micfil reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml index d370c98a62c7..e847611a85f7 100644 --- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -11,8 +11,11 @@ maintainers: description: | fsl_rpmsg is a virtual audio device. Mapping to real hardware devices - are SAI, DMA controlled by Cortex M core. What we see from Linux - side is a device which provides audio service by rpmsg channel. + are SAI, MICFIL, DMA controlled by Cortex M core. What we see from + Linux side is a device which provides audio service by rpmsg channel. + We can create different sound cards which access different hardwares + such as SAI, MICFIL, .etc through building rpmsg channels between + Cortex-A and Cortex-M. properties: compatible: @@ -85,6 +88,16 @@ properties: This is a boolean property. If present, the receiving function will be enabled. + fsl,rpmsg-channel-name: + $ref: /schemas/types.yaml#/definitions/string + description: | + A string property to assign rpmsg channel this sound card sits on. + This property can be omitted if there is only one sound card and it sits + on "rpmsg-audio-channel". + enum: + - rpmsg-audio-channel + - rpmsg-micfil-channel + required: - compatible - model @@ -107,3 +120,22 @@ examples: <&clk IMX8MN_AUDIO_PLL2_OUT>; clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k"; }; + + - | + #include <dt-bindings/clock/imx8mm-clock.h> + + rpmsg_micfil: audio-controller { + compatible = "fsl,imx8mm-rpmsg-audio"; + model = "micfil-audio"; + fsl,rpmsg-channel-name = "rpmsg-micfil-channel"; + fsl,enable-lpa; + fsl,rpmsg-in; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>, + <&clk IMX8MM_CLK_SDMA3_ROOT>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>; + clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml index 70c4111d59c7..5b28d2d51327 100644 --- a/Documentation/devicetree/bindings/sound/fsl,sai.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml @@ -18,14 +18,12 @@ description: | properties: compatible: oneOf: - - enum: - - fsl,vf610-sai - - fsl,imx6sx-sai - - fsl,imx6ul-sai - - fsl,imx7ulp-sai - - fsl,imx8mq-sai - - fsl,imx8qm-sai - - fsl,imx8ulp-sai + - items: + - enum: + - fsl,imx6ul-sai + - fsl,imx7d-sai + - const: fsl,imx6sx-sai + - items: - enum: - fsl,imx8mm-sai @@ -33,19 +31,18 @@ properties: - fsl,imx8mp-sai - const: fsl,imx8mq-sai + - items: + - enum: + - fsl,imx6sx-sai + - fsl,imx7ulp-sai + - fsl,imx8mq-sai + - fsl,imx8qm-sai + - fsl,imx8ulp-sai + - fsl,vf610-sai + reg: maxItems: 1 - interrupts: - items: - - description: receive and transmit interrupt - - dmas: - maxItems: 2 - - dma-names: - maxItems: 2 - clocks: items: - description: The ipg clock for register access @@ -67,7 +64,7 @@ properties: - const: mclk3 - const: pll8k - const: pll11k - minItems: 4 + minItems: 5 - items: - const: bus - const: mclk1 @@ -77,19 +74,37 @@ properties: - const: pll11k minItems: 4 - lsb-first: - description: | - Configures whether the LSB or the MSB is transmitted - first for the fifo data. If this property is absent, - the MSB is transmitted first as default, or the LSB - is transmitted first. - type: boolean + dmas: + maxItems: 2 + + dma-names: + maxItems: 2 + + interrupts: + items: + - description: receive and transmit interrupt big-endian: description: | required if all the SAI registers are big-endian rather than little-endian. type: boolean + fsl,dataline: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Configure the dataline. It has 3 value for each configuration + maxItems: 16 + items: + items: + - description: format Default(0), I2S(1) or PDM(2) + enum: [0, 1, 2] + - description: dataline mask for 'rx' + - description: dataline mask for 'tx' + + fsl,sai-mclk-direction-output: + description: SAI will output the SAI MCLK clock. + type: boolean + fsl,sai-synchronous-rx: description: | SAI will work in the synchronous mode (sync Tx with Rx) which means @@ -108,31 +123,24 @@ properties: of transmitter. type: boolean - fsl,dataline: - $ref: /schemas/types.yaml#/definitions/uint32-matrix - description: | - Configure the dataline. It has 3 value for each configuration - maxItems: 16 - items: - items: - - description: format Default(0), I2S(1) or PDM(2) - enum: [0, 1, 2] - - description: dataline mask for 'rx' - - description: dataline mask for 'tx' - - fsl,sai-mclk-direction-output: - description: SAI will output the SAI MCLK clock. - type: boolean - fsl,shared-interrupt: description: Interrupt is shared with other modules. type: boolean + lsb-first: + description: | + Configures whether the LSB or the MSB is transmitted + first for the fifo data. If this property is absent, + the MSB is transmitted first as default, or the LSB + is transmitted first. + type: boolean + "#sound-dai-cells": const: 0 description: optional, some dts node didn't add it. allOf: + - $ref: dai-common.yaml# - if: properties: compatible: @@ -168,13 +176,13 @@ allOf: required: - compatible - reg - - interrupts - - dmas - - dma-names - clocks - clock-names + - dmas + - dma-names + - interrupts -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index c3e9f3485449..1434f4433738 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -8,7 +8,7 @@ title: Audio codec controlled by ChromeOS EC maintainers: - Cheng-Yi Chiang <cychiang@chromium.org> - - Tzung-Bi Shih <tzungbi@google.com> + - Tzung-Bi Shih <tzungbi@kernel.org> description: | Google's ChromeOS EC codec is a digital mic codec provided by the @@ -17,6 +17,9 @@ description: | subnode of a cros-ec node. (see Documentation/devicetree/bindings/mfd/google,cros-ec.yaml). +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: google,cros-ec-codec @@ -42,7 +45,7 @@ required: - compatible - '#sound-dai-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -57,6 +60,7 @@ examples: cros-ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; + interrupts = <93 0>; codecs { #address-cells = <2>; diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml index d607325f2f15..ba44406c9caf 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml +++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml @@ -9,6 +9,9 @@ title: Ingenic SoCs AC97 / I2S Controller (AIC) DT bindings maintainers: - Paul Cercueil <paul@crapouillou.net> +allOf: + - $ref: dai-common.yaml# + properties: $nodename: pattern: '^audio-controller@' @@ -37,15 +40,11 @@ properties: items: - description: AIC clock - description: I2S clock - - description: EXT clock - - description: PLL/2 clock clock-names: items: - const: aic - const: i2s - - const: ext - - const: pll half dmas: items: @@ -57,7 +56,7 @@ properties: - const: rx - const: tx -additionalProperties: false +unevaluatedProperties: false required: - compatible @@ -82,10 +81,8 @@ examples: interrupts = <18>; clocks = <&cgu JZ4740_CLK_AIC>, - <&cgu JZ4740_CLK_I2S>, - <&cgu JZ4740_CLK_EXT>, - <&cgu JZ4740_CLK_PLL_HALF>; - clock-names = "aic", "i2s", "ext", "pll half"; + <&cgu JZ4740_CLK_I2S>; + clock-names = "aic", "i2s"; dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>; dma-names = "rx", "tx"; diff --git a/Documentation/devicetree/bindings/sound/ingenic,codec.yaml b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml index 48aae54dd643..a07d607e9b93 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,codec.yaml +++ b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml @@ -9,6 +9,9 @@ title: Ingenic JZ47xx internal codec DT bindings maintainers: - Paul Cercueil <paul@crapouillou.net> +allOf: + - $ref: dai-common.yaml# + properties: $nodename: pattern: '^audio-codec@.*' @@ -37,7 +40,7 @@ properties: '#sound-dai-cells': const: 0 -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml index d1060c3dee86..76b6f2cf25df 100644 --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml @@ -14,6 +14,9 @@ maintainers: description: | Intel KeemBay I2S +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -65,7 +68,7 @@ required: - clock-names - interrupts -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml index b97e0fcbdba3..a67b79cbe006 100644 --- a/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml +++ b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml @@ -9,6 +9,9 @@ title: Bluetooth SCO Audio Codec maintainers: - Mark Brown <broonie@kernel.org> +allOf: + - $ref: dai-common.yaml# + properties: '#sound-dai-cells': enum: @@ -26,7 +29,7 @@ required: - '#sound-dai-cells' - compatible -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml index 808f6d2736c7..fe5f0756af2f 100644 --- a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml +++ b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml @@ -10,7 +10,7 @@ maintainers: - Mark Brown <broonie@kernel.org> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml index 81f266d66ec5..92d896e0d323 100644 --- a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml +++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml @@ -9,6 +9,9 @@ title: Marvel SSPA Digital Audio Interface Bindings maintainers: - Lubomir Rintel <lkundrak@v3.sk> +allOf: + - $ref: dai-common.yaml# + properties: $nodename: pattern: "^audio-controller(@.*)?$" @@ -73,7 +76,7 @@ required: - dma-names - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt deleted file mode 100644 index 75db84d06240..000000000000 --- a/Documentation/devicetree/bindings/sound/max98357a.txt +++ /dev/null @@ -1,28 +0,0 @@ -Maxim MAX98357A/MAX98360A audio DAC - -This node models the Maxim MAX98357A/MAX98360A DAC. - -Required properties: -- compatible : "maxim,max98357a" for MAX98357A. - "maxim,max98360a" for MAX98360A. - -Optional properties: -- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin. - If this option is not specified then driver does not manage - the pin state (e.g. chip is always on). -- sdmode-delay : specify delay time for SD_MODE pin. - If this option is specified, which means it's required i2s clocks - ready before SD_MODE is unmuted in order to avoid the speaker pop noise. - It's observed that 5ms is sufficient. - -Example: - -max98357a { - compatible = "maxim,max98357a"; - sdmode-gpios = <&qcom_pinmux 25 0>; -}; - -max98360a { - compatible = "maxim,max98360a"; - sdmode-gpios = <&qcom_pinmux 25 0>; -}; diff --git a/Documentation/devicetree/bindings/sound/max98504.txt b/Documentation/devicetree/bindings/sound/max98504.txt deleted file mode 100644 index 583ed5fdfb28..000000000000 --- a/Documentation/devicetree/bindings/sound/max98504.txt +++ /dev/null @@ -1,44 +0,0 @@ -Maxim MAX98504 class D mono speaker amplifier - -This device supports I2C control interface and an IRQ output signal. It features -a PCM and PDM digital audio interface (DAI) and a differential analog input. - -Required properties: - - - compatible : "maxim,max98504" - - reg : should contain the I2C slave device address - - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device, - as covered in ../regulator/regulator.txt - - interrupts : should specify the interrupt line the device is connected to, - as described in ../interrupt-controller/interrupts.txt - -Optional properties: - - - maxim,brownout-threshold - the PVDD brownout threshold, the value must be - from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range - - maxim,brownout-attenuation - the brownout attenuation to the speaker gain - applied during the "attack hold" and "timed hold" phase, the value must be - from 0...6 (dB) range - - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms, - 0...255 (VBATBROWN_ATTK_HOLD, register 0x0018) - - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms, - 0...255 (VBATBROWN_TIME_HOLD, register 0x0019) - - maxim,brownout-release-rate-ms - the brownout release phase step time in ms, - 0...255 (VBATBROWN_RELEASE, register 0x001A) - -The default value when the above properties are not specified is 0, -the maxim,brownout-threshold property must be specified to actually enable -the PVDD brownout protection. - -Example: - - max98504@31 { - compatible = "maxim,max98504"; - reg = <0x31>; - interrupt-parent = <&gpio_bank_0>; - interrupts = <2 0>; - - DVDD-supply = <®ulator>; - DIOVDD-supply = <®ulator>; - PVDD-supply = <®ulator>; -}; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98357a.yaml b/Documentation/devicetree/bindings/sound/maxim,max98357a.yaml new file mode 100644 index 000000000000..83ba8666fbb4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98357a.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98357a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98357A/MAX98360A amplifier + +maintainers: + - Tzung-Bi Shih <tzungbi@kernel.org> + +description: + Maxim Integrated MAX98357A/MAX98360A is a digital pulse-code modulation (PCM) + input Class D amplifier. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - maxim,max98357a + - maxim,max98360a + + '#sound-dai-cells': + const: 0 + + sdmode-gpios: + maxItems: 1 + description: + Chip's SD_MODE pin. If missing the chip is always on. + + sdmode-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay time for SD_MODE pin changes intended to make I2S clocks ready + before SD_MODE is unmuted in order to avoid the speaker pop noise. + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + amplifier { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + sdmode-gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98504.yaml b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml new file mode 100644 index 000000000000..23f19a9d2c06 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98504.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98504 class D mono speaker amplifier + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Maxim Integrated MAX98504 speaker amplifier supports I2C control interface + with an IRQ output signal, PCM and PDM digital audio interface (DAI) and a + differential analog input. + +properties: + compatible: + const: maxim,max98504 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + DIOVDD-supply: true + DVDD-supply: true + PVDD-supply: true + + maxim,brownout-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 21 + default: 0 + description: + PVDD brownout threshold, where values correspond to 2.6V, 2.65V...3.65V + voltage range. Property also enables the PVDD brownout protection. + + maxim,brownout-attenuation: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 6 + default: 0 + description: + Brownout attenuation to the speaker gain applied during the "attack hold" + and "timed hold" phase, the value must be from 0...6 (dB) range. + + maxim,brownout-attack-hold-ms: + maximum: 255 + default: 0 + description: + Brownout attack hold phase time in ms, VBATBROWN_ATTK_HOLD, register 0x0018. + + maxim,brownout-timed-hold-ms: + maximum: 255 + default: 0 + description: + Brownout timed hold phase time in ms, VBATBROWN_TIME_HOLD, register 0x0019. + + maxim,brownout-release-rate-ms: + maximum: 255 + default: 0 + description: + Brownout release phase step time in ms, VBATBROWN_RELEASE, register 0x001A. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + amplifier@31 { + compatible = "maxim,max98504"; + reg = <0x31>; + + DIOVDD-supply = <&ldo3_reg>; + DVDD-supply = <&ldo3_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml index 0481315cb5f2..621022872c8d 100644 --- a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml @@ -66,13 +66,15 @@ properties: enum: [0, 1, 2, 3] default: 0 -if: - properties: - compatible: - const: microchip,sam9x60-i2smcc -then: - properties: - microchip,tdm-data-pair: false +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + const: microchip,sam9x60-i2smcc + then: + properties: + microchip,tdm-data-pair: false required: - "#sound-dai-cells" @@ -84,7 +86,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml index d218e4ab9a7a..c383162140bb 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml @@ -13,6 +13,9 @@ description: The Microchip Sony/Philips Digital Interface Transmitter is a serial port compliant with the IEC-60958 standard. +allOf: + - $ref: dai-common.yaml# + properties: "#sound-dai-cells": const: 0 @@ -53,7 +56,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml index 04414eb4ada9..c37b89d94c12 100644 --- a/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml +++ b/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml @@ -13,6 +13,9 @@ description: The Microchip Pulse Density Microphone Controller (PDMC) interfaces up to 4 digital microphones having Pulse Density Modulated (PDM) outputs. +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: microchip,sama7g5-pdmc @@ -75,7 +78,7 @@ required: - dma-names - microchip,mic-pos -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml index 4fc5b045d3cf..9d3139990237 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml @@ -21,6 +21,13 @@ properties: $ref: "/schemas/types.yaml#/definitions/phandle" description: The phandle of MT8186 ASoC platform. + dmic-gpios: + maxItems: 1 + description: + dmic-gpios optional prop for switching between two DMICs. + Ex, the GPIO can control a MUX HW component to select + dmic clk and data form a Front or Rear dmic. + headset-codec: type: object additionalProperties: false @@ -63,14 +70,19 @@ required: examples: - | + #include <dt-bindings/gpio/gpio.h> sound: mt8186-sound { compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound"; mediatek,platform = <&afe>; pinctrl-names = "aud_clk_mosi_off", - "aud_clk_mosi_on"; + "aud_clk_mosi_on", + "aud_gpio_dmic_sec"; pinctrl-0 = <&aud_clk_mosi_off>; pinctrl-1 = <&aud_clk_mosi_on>; + pinctrl-2 = <&aud_gpio_dmic_sec>; + + dmic-gpios = <&pio 23 GPIO_ACTIVE_HIGH>; headset-codec { sound-dai = <&rt5682s>; diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index 478be7e3fa29..c6e614c1c30b 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -34,7 +34,7 @@ properties: properties: sound-dai: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 required: - sound-dai @@ -48,7 +48,6 @@ properties: maxItems: 2 items: maxItems: 1 - $ref: /schemas/types.yaml#/definitions/phandle-array required: - sound-dai diff --git a/Documentation/devicetree/bindings/sound/mvebu-audio.txt b/Documentation/devicetree/bindings/sound/mvebu-audio.txt index cb8c07c81ce4..4f5dec5cb3c2 100644 --- a/Documentation/devicetree/bindings/sound/mvebu-audio.txt +++ b/Documentation/devicetree/bindings/sound/mvebu-audio.txt @@ -6,9 +6,14 @@ Required properties: "marvell,kirkwood-audio" for Kirkwood platforms "marvell,dove-audio" for Dove platforms "marvell,armada370-audio" for Armada 370 platforms + "marvell,armada-380-audio" for Armada 38x platforms - reg: physical base address of the controller and length of memory mapped - region. + region (named "i2s_regs"). + With "marvell,armada-380-audio" two other regions are required: + first of those is dedicated for Audio PLL Configuration registers + (named "pll_regs") and the second one ("soc_ctrl") - for register + where one of exceptive I/O types (I2S or S/PDIF) is set. - interrupts: with "marvell,kirkwood-audio", the audio interrupt @@ -23,6 +28,13 @@ Required properties: "internal" for the internal clock "extclk" for the external clock +Optional properties: + +- spdif-mode: + Enable S/PDIF mode on Armada 38x SoC. Using this property + disables standard I2S I/O. Valid only with "marvell,armada-380-audio" + compatible string. + Example: i2s1: audio-controller@b4000 { diff --git a/Documentation/devicetree/bindings/sound/nau8315.txt b/Documentation/devicetree/bindings/sound/nau8315.txt index 6eaec46f384c..1cd94517d45e 100644 --- a/Documentation/devicetree/bindings/sound/nau8315.txt +++ b/Documentation/devicetree/bindings/sound/nau8315.txt @@ -2,6 +2,7 @@ Nuvoton NAU8315 Mono Class-D Amplifier Required properties: - compatible : "nuvoton,nau8315" + "nuvoton,nau8318" Optional properties: - enable-gpios : GPIO specifier for the chip's device enable input(EN) pin. @@ -16,3 +17,8 @@ nau8315 { compatible = "nuvoton,nau8315"; enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; + +nau8318 { + compatible = "nuvoton,nau8318"; + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml index d82415c21271..e15f387c4c29 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml @@ -23,7 +23,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index 3d538df878ea..e1362c77472b 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -18,7 +18,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml index 60a368a132b8..dc76a4dc0ed2 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml @@ -16,6 +16,9 @@ maintainers: - Thierry Reding <treding@nvidia.com> - Jon Hunter <jonathanh@nvidia.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: nvidia,tegra20-spdif @@ -66,7 +69,7 @@ required: - dma-names - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml index ea0dc0ece1bc..e4c871797fa6 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml @@ -19,7 +19,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml index 1aff61f072bb..021b72546ba4 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml @@ -18,7 +18,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 0f9d2b461e02..bff551c35da7 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -17,7 +17,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 12cd17eede99..a82f11fb6c9a 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -17,7 +17,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml index 570b03282aeb..049898f02e85 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml @@ -17,7 +17,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml index 4aecbc847b98..d0280d8aa3af 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml @@ -20,7 +20,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml index 9dc9ba590fa3..5fc03b8771b1 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml @@ -17,7 +17,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml index 694f890d6305..185ca0be4f02 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml @@ -17,7 +17,7 @@ maintainers: - Sameer Pujar <spujar@nvidia.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml index 7f2e68ff6d34..fd2415e231eb 100644 --- a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml +++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml @@ -10,7 +10,7 @@ maintainers: - Stephan Gerhold <stephan@gerhold.net> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index ef18a572a1ff..5e26b3e9db2c 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -109,9 +109,10 @@ required: - interrupt-names - '#sound-dai-cells' -additionalProperties: false +unevaluatedProperties: false allOf: + - $ref: dai-common.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index 1de11e7f33bb..23564fd394a2 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -9,6 +9,9 @@ title: LPASS(Low Power Audio Subsystem) RX Macro audio codec DT bindings maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -43,8 +46,7 @@ properties: - const: fsgen clock-output-names: - items: - - const: mclk + maxItems: 1 power-domains: maxItems: 2 @@ -59,7 +61,7 @@ required: - reg - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index de8297b358e8..38708578ee29 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -9,6 +9,9 @@ title: LPASS(Low Power Audio Subsystem) TX Macro audio codec DT bindings maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -43,8 +46,7 @@ properties: - const: fsgen clock-output-names: - items: - - const: mclk + maxItems: 1 power-domains: maxItems: 2 @@ -63,7 +65,7 @@ required: - reg - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 9f473c08cb2e..188883a2e671 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -9,6 +9,9 @@ title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -39,8 +42,7 @@ properties: - const: mclk clock-output-names: - items: - - const: fsgen + maxItems: 1 power-domains: maxItems: 2 @@ -62,7 +64,7 @@ required: - reg - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index 4959ad658eac..bebca3e3f86f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -9,6 +9,9 @@ title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -38,8 +41,7 @@ properties: - const: fsgen clock-output-names: - items: - - const: mclk + maxItems: 1 qcom,dmic-sample-rate: description: dmic sample rate @@ -53,7 +55,7 @@ required: - reg - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml index d0f7a79e240a..3f11d2e183e1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml @@ -14,6 +14,9 @@ description: Qualcomm Audio Device Manager (Q6ADM) routing node represents routing specific configuration. +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -26,27 +29,11 @@ required: - compatible - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/soc/qcom,apr.h> - #include <dt-bindings/sound/qcom,q6asm.h> - - apr { - compatible = "qcom,apr-v2"; - qcom,domain = <APR_DOMAIN_ADSP>; - #address-cells = <1>; - #size-cells = <0>; - - service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; - }; + routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml new file mode 100644 index 000000000000..fe14a97ea616 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6adm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Audio Device Manager (Q6ADM) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +allOf: + - $ref: /schemas/soc/qcom/qcom,apr-services.yaml# + +properties: + compatible: + enum: + - qcom,q6adm + + routing: + type: object + $ref: /schemas/sound/qcom,q6adm-routing.yaml# + unevaluatedProperties: false + description: Qualcomm DSP LPASS audio routing + +required: + - compatible + - routing + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + + apr { + #address-cells = <1>; + #size-cells = <0>; + + service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml new file mode 100644 index 000000000000..297aa362aa54 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6afe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Audio FrontEnd (Q6AFE) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +allOf: + - $ref: /schemas/soc/qcom/qcom,apr-services.yaml# + +properties: + compatible: + enum: + - qcom,q6afe + + clock-controller: + $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml# + unevaluatedProperties: false + description: Qualcomm DSP LPASS clock controller + + dais: + type: object + $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml# + unevaluatedProperties: false + description: Qualcomm DSP audio ports + +required: + - compatible + - dais + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + #include <dt-bindings/sound/qcom,q6afe.h> + apr { + #address-cells = <1>; + #size-cells = <0>; + + service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + + dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0 1 2 3>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml index 24f7bf2bfd95..73a4afad5a74 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml @@ -27,20 +27,7 @@ additionalProperties: false examples: - | - #include <dt-bindings/soc/qcom,gpr.h> - gpr { - compatible = "qcom,gpr"; - #address-cells = <1>; - #size-cells = <0>; - qcom,domain = <GPR_DOMAIN_ID_ADSP>; - - service@1 { - compatible = "qcom,q6apm"; - reg = <1>; - - dais { - compatible = "qcom,q6apm-dais"; - iommus = <&apps_smmu 0x1801 0x0>; - }; - }; + dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml new file mode 100644 index 000000000000..894e653d37d7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6apm-lpass-dais.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm DSP LPASS (Low Power Audio SubSystem) Audio Ports + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - qcom,q6apm-lpass-dais + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + dais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml new file mode 100644 index 000000000000..ef1965aca254 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6apm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Audio Process Manager (Q6APM) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +allOf: + - $ref: dai-common.yaml# + - $ref: /schemas/soc/qcom/qcom,apr-services.yaml# + +properties: + compatible: + enum: + - qcom,q6apm + + bedais: + type: object + $ref: /schemas/sound/qcom,q6apm-lpass-dais.yaml# + unevaluatedProperties: false + description: Qualcomm DSP audio ports + + dais: + type: object + $ref: /schemas/sound/qcom,q6apm-dai.yaml# + unevaluatedProperties: false + description: Qualcomm DSP audio ports + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - bedais + - dais + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,gpr.h> + + gpr { + #address-cells = <1>; + #size-cells = <0>; + + service@1 { + reg = <GPR_APM_MODULE_IID>; + compatible = "qcom,q6apm"; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml index 8deb8ffb143b..0110b38f6de9 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml @@ -73,40 +73,24 @@ additionalProperties: false examples: - | - #include <dt-bindings/soc/qcom,apr.h> - #include <dt-bindings/sound/qcom,q6asm.h> - - apr { - compatible = "qcom,apr-v2"; - qcom,domain = <APR_DOMAIN_ADSP>; + dais { + compatible = "qcom,q6asm-dais"; + iommus = <&apps_smmu 0x1821 0x0>; #address-cells = <1>; #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; - service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - dais { - compatible = "qcom,q6asm-dais"; - iommus = <&apps_smmu 0x1821 0x0>; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - is-compress-dai; - direction = <1>; - }; - }; + dai@2 { + reg = <2>; + is-compress-dai; + direction = <1>; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml new file mode 100644 index 000000000000..cb49f9667cca --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6asm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Audio Stream Manager (Q6ASM) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +allOf: + - $ref: /schemas/soc/qcom/qcom,apr-services.yaml# + +properties: + compatible: + enum: + - qcom,q6asm + + dais: + type: object + $ref: /schemas/sound/qcom,q6asm-dais.yaml# + unevaluatedProperties: false + description: Qualcomm DSP audio ports + +required: + - compatible + - dais + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + + apr { + #address-cells = <1>; + #size-cells = <0>; + + service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + dais { + compatible = "qcom,q6asm-dais"; + iommus = <&apps_smmu 0x1821 0x0>; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + is-compress-dai; + direction = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.yaml b/Documentation/devicetree/bindings/sound/qcom,q6core.yaml new file mode 100644 index 000000000000..e240712de9ca --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6core.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6core.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Audio Core (Q6Core) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +allOf: + - $ref: /schemas/soc/qcom/qcom,apr-services.yaml# + +properties: + compatible: + enum: + - qcom,q6core + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + + apr { + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml index fd567d20417d..aa6c0ecba5cf 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml @@ -35,41 +35,7 @@ additionalProperties: false examples: - | - #include <dt-bindings/soc/qcom,apr.h> - #include <dt-bindings/sound/qcom,q6afe.h> - apr { - compatible = "qcom,apr-v2"; - qcom,domain = <APR_DOMAIN_ADSP>; - #address-cells = <1>; - #size-cells = <0>; - - service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - clock-controller { - compatible = "qcom,q6afe-clocks"; - #clock-cells = <2>; - }; - }; - }; - - - | - #include <dt-bindings/soc/qcom,gpr.h> - gpr { - compatible = "qcom,gpr"; - qcom,domain = <GPR_DOMAIN_ID_ADSP>; - #address-cells = <1>; - #size-cells = <0>; - - service@2 { - reg = <GPR_PRM_MODULE_IID>; - compatible = "qcom,q6prm"; - - clock-controller { - compatible = "qcom,q6prm-lpass-clocks"; - #clock-cells = <2>; - }; - }; + clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml index e53fc0960a14..d8ebf2e528d2 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -16,7 +16,6 @@ properties: compatible: enum: - qcom,q6afe-dais - - qcom,q6apm-lpass-dais '#sound-dai-cells': const: 1 @@ -150,54 +149,16 @@ additionalProperties: false examples: - | - #include <dt-bindings/soc/qcom,apr.h> - #include <dt-bindings/sound/qcom,q6afe.h> - apr { - compatible = "qcom,apr-v2"; - #address-cells = <1>; - #size-cells = <0>; - qcom,domain = <APR_DOMAIN_ADSP>; - - service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - dais { - compatible = "qcom,q6afe-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - - dai@22 { - reg = <QUATERNARY_MI2S_RX>; - qcom,sd-lines = <0 1 2 3>; - }; - }; - }; - }; - - | - #include <dt-bindings/soc/qcom,gpr.h> - gpr { - compatible = "qcom,gpr"; + #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + + dais { + compatible = "qcom,q6afe-dais"; #address-cells = <1>; #size-cells = <0>; - qcom,domain = <GPR_DOMAIN_ID_ADSP>; - - service@1 { - compatible = "qcom,q6apm"; - reg = <GPR_APM_MODULE_IID>; - - dais { - compatible = "qcom,q6apm-lpass-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - - dai@22 { - reg = <QUATERNARY_MI2S_RX>; - qcom,sd-lines = <0 1 2 3>; - }; - }; + #sound-dai-cells = <1>; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0 1 2 3>; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml new file mode 100644 index 000000000000..f6dbb1267bfe --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6prm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Proxy Resource Manager (Q6PRM) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +allOf: + - $ref: /schemas/soc/qcom/qcom,apr-services.yaml# + +properties: + compatible: + enum: + - qcom,q6prm + + clock-controller: + $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml# + unevaluatedProperties: false + description: Qualcomm DSP LPASS clock controller + +required: + - compatible + - clock-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,gpr.h> + + gpr { + #address-cells = <1>; + #size-cells = <0>; + + service@2 { + reg = <GPR_PRM_MODULE_IID>; + compatible = "qcom,q6prm"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt index 5d6ea66a863f..1f75feec3dec 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt +++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt @@ -109,7 +109,7 @@ audio-codec@1{ reg = <1 0>; interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr2" - reset-gpios = <&msmgpio 64 0>; + reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>; slim-ifc-dev = <&wc9335_ifd>; clock-names = "mclk", "native"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>, diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml index 51547190f709..67d84463eaeb 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml @@ -13,6 +13,9 @@ description: | Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC. It has RX and TX Soundwire slave devices. +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -106,7 +109,7 @@ required: - qcom,micbias4-microvolt - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml index 6113f65f2990..65b0e67f82a3 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml @@ -15,6 +15,9 @@ description: | Their primary operating mode uses a SoundWire digital audio interface. This binding is for SoundWire interface. +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: sdw10217020200 @@ -23,7 +26,7 @@ properties: maxItems: 1 powerdown-gpios: - description: GPIO spec for Powerdown/Shutdown line to use + description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N) maxItems: 1 vdd-supply: @@ -43,10 +46,12 @@ required: - "#thermal-sensor-cells" - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> + soundwire-controller@3250000 { #address-cells = <2>; #size-cells = <0>; @@ -55,19 +60,21 @@ examples: speaker@0,1 { compatible = "sdw10217020200"; reg = <0 1>; - powerdown-gpios = <&tlmm 1 0>; + powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; vdd-supply = <&vreg_s10b_1p8>; #thermal-sensor-cells = <0>; #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; }; speaker@0,2 { compatible = "sdw10217020200"; reg = <0 2>; - powerdown-gpios = <&tlmm 89 0>; + powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; vdd-supply = <&vreg_s10b_1p8>; #thermal-sensor-cells = <0>; #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; }; }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml index 1d73204451b1..ea7d4900ee4a 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Realtek rt1015p codec devicetree bindings maintainers: - - Tzung-Bi Shih <tzungbi@google.com> + - Tzung-Bi Shih <tzungbi@kernel.org> description: | Rt1015p is a rt1015 variant which does not support I2C and diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml index ca5b8987b749..e631ace7aad1 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml @@ -12,6 +12,9 @@ maintainers: description: | Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only. +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: realtek,rt5682s @@ -87,11 +90,32 @@ properties: maxItems: 2 description: Name given for DAI word clock and bit clock outputs. -additionalProperties: false + "#sound-dai-cells": + const: 1 + + AVDD-supply: + description: Regulator supplying analog power through the AVDD pin. + + MICVDD-supply: + description: Regulator supplying power for the microphone bias through the + MICVDD pin. + + DBVDD-supply: + description: Regulator supplying I/O power through the DBVDD pin. + + LDO1-IN-supply: + description: Regulator supplying power to the digital core and charge pump + through the LDO1_IN pin. + +unevaluatedProperties: false required: - compatible - reg + - AVDD-supply + - MICVDD-supply + - DBVDD-supply + - LDO1-IN-supply examples: - | @@ -117,5 +141,10 @@ examples: clocks = <&osc>; clock-names = "mclk"; + + AVDD-supply = <&avdd_reg>; + MICVDD-supply = <&micvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; + LDO1-IN-supply = <&ldo1_in_reg>; }; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml index 0dd3f7361399..df91991699a7 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml @@ -9,6 +9,9 @@ title: Renesas FIFO-buffered Serial Interface (FSI) maintainers: - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +allOf: + - $ref: dai-common.yaml# + properties: $nodename: pattern: "^sound@.*" @@ -64,7 +67,7 @@ required: - power-domains - '#sound-dai-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 7df40c38e865..cb90463c7297 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -274,6 +274,7 @@ required: - "#sound-dai-cells" allOf: + - $ref: dai-common.yaml# - if: properties: compatible: @@ -304,7 +305,7 @@ allOf: - ssi - audmapp -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml index 0d9840375132..196881d94396 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml @@ -9,6 +9,9 @@ title: Renesas RZ/{G2L,V2L} ASoC Sound Serial Interface (SSIF-2) maintainers: - Biju Das <biju.das.jz@bp.renesas.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: items: @@ -90,7 +93,7 @@ required: - resets - '#sound-dai-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml index 5655ca568240..a1242e8e0687 100644 --- a/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml +++ b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml @@ -16,6 +16,9 @@ description: | applications like as TV, monitors. home entertainment, electronic music equipment. +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -42,7 +45,7 @@ required: - dvdd-supply - '#sound-dai-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml index 6a7c004bef17..4c95895de75e 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml @@ -14,6 +14,9 @@ description: maintainers: - Nicolas Frattaroli <frattaroli.nicolas@gmail.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -21,6 +24,7 @@ properties: - rockchip,rk1808-i2s-tdm - rockchip,rk3308-i2s-tdm - rockchip,rk3568-i2s-tdm + - rockchip,rk3588-i2s-tdm - rockchip,rv1126-i2s-tdm reg: @@ -135,10 +139,9 @@ required: - clock-names - resets - reset-names - - rockchip,grf - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml index 22e1cf6c0592..ff9e400494f3 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml @@ -16,6 +16,9 @@ description: maintainers: - Heiko Stuebner <heiko@sntech.de> +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -83,7 +86,7 @@ required: - dma-names - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml index 75b3b33b5f1f..5cdb8bcc687b 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml @@ -8,6 +8,9 @@ title: Rockchip rk3328 internal codec maintainers: - Heiko Stuebner <heiko@sntech.de> +allOf: + - $ref: dai-common.yaml# + properties: compatible: @@ -53,7 +56,7 @@ required: - rockchip,grf - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index 7e36e389e976..1cb4da300607 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -13,6 +13,9 @@ description: maintainers: - Heiko Stuebner <heiko@sntech.de> +allOf: + - $ref: dai-common.yaml# + properties: compatible: oneOf: @@ -111,7 +114,7 @@ required: - dma-names - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml index d0a24bf928d6..4f51b2fa82db 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml @@ -75,17 +75,18 @@ required: - dma-names - "#sound-dai-cells" -if: - properties: - compatible: - contains: - const: rockchip,rk3288-spdif - -then: - required: - - rockchip,grf - -additionalProperties: false +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + const: rockchip,rk3288-spdif + then: + required: + - rockchip,grf + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml index 859ce64da152..5abcf92bc484 100644 --- a/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml +++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml @@ -14,6 +14,9 @@ description: maintainers: - Katsuhiro Suzuki <katsuhiro@katsuster.net> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: rohm,bd28623 @@ -50,7 +53,7 @@ required: - VCCP2-supply - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt index 013f534fa059..8f3f62c0226a 100644 --- a/Documentation/devicetree/bindings/sound/rt5659.txt +++ b/Documentation/devicetree/bindings/sound/rt5659.txt @@ -42,7 +42,7 @@ Optional properties: - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin. -- sound-name-prefix: Please refer to name-prefix.yaml +- sound-name-prefix: Please refer to dai-common.yaml - ports: A Codec may have a single or multiple I2S interfaces. These interfaces on Codec side can be described under 'ports' or 'port'. diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt index c5f2b8febcee..5e1d08de18a5 100644 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -8,6 +8,21 @@ Required properties: - reg : The I2C address of the device. +- AVDD-supply: phandle to the regulator supplying analog power through the + AVDD pin + +- MICVDD-supply: phandle to the regulator supplying power for the microphone + bias through the MICVDD pin. Either MICVDD or VBAT should be present. + +- VBAT-supply: phandle to the regulator supplying battery power through the + VBAT pin. Either MICVDD or VBAT should be present. + +- DBVDD-supply: phandle to the regulator supplying I/O power through the DBVDD + pin. + +- LDO1-IN-supply: phandle to the regulator supplying power to the digital core + and charge pump through the LDO1_IN pin. + Optional properties: - interrupts : The CODEC's interrupt output. @@ -46,7 +61,7 @@ Optional properties: - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out. -- #sound-dai-cells: Should be set to '<0>'. +- #sound-dai-cells: Should be set to '<1>'. Pins on the device (for linking into audio routes) for RT5682: @@ -75,4 +90,9 @@ rt5682 { clocks = <&osc>; clock-names = "mclk"; + + AVDD-supply = <&avdd_reg>; + MICVDD-supply = <&micvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; + LDO1-IN-supply = <&ldo1_in_reg>; }; diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml index 84c4d6cba521..8d5dcf9cd43e 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -10,6 +10,9 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: description: | @@ -124,7 +127,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml index 2bc7f00ce4a2..02059d66b084 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -9,6 +9,9 @@ title: Freescale SGTL5000 Stereo Codec maintainers: - Fabio Estevam <festevam@gmail.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: fsl,sgtl5000 @@ -88,7 +91,7 @@ required: - VDDA-supply - VDDIO-supply -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml index 5428ba9e23a6..5db1f989d050 100644 --- a/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml +++ b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml @@ -10,7 +10,7 @@ maintainers: - Jerome Brunet <jbrunet@baylibre.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml index b5fc35ee9b65..9f319caf3db7 100644 --- a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml +++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml @@ -14,7 +14,7 @@ description: | their input line is connected to the output line. allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml index 4b0795819064..56e623d4e168 100644 --- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml @@ -50,21 +50,21 @@ properties: - const: rx minItems: 1 -if: - properties: - compatible: - contains: - const: canaan,k210-i2s - -then: - properties: - "#sound-dai-cells": - const: 1 - -else: - properties: - "#sound-dai-cells": - const: 0 +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + const: canaan,k210-i2s + then: + properties: + "#sound-dai-cells": + const: 1 + else: + properties: + "#sound-dai-cells": + const: 0 required: - compatible diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml index 70f62ecd6eb2..9cf0efaed88e 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml @@ -9,6 +9,9 @@ title: UniPhier AIO audio system maintainers: - <alsa-devel@alsa-project.org> +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -70,7 +73,7 @@ patternProperties: $ref: audio-graph-port.yaml# unevaluatedProperties: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml index be6acfda9999..985277648de1 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml @@ -9,6 +9,9 @@ title: UniPhier EVEA SoC-internal sound codec maintainers: - <alsa-devel@alsa-project.org> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: socionext,uniphier-evea @@ -48,7 +51,7 @@ patternProperties: $ref: audio-graph-port.yaml# unevaluatedProperties: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml index d3966ae04ad0..a040d4d31412 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml @@ -13,6 +13,9 @@ description: The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode. Only some SPI instances support I2S. +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -68,7 +71,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml index 837e830c47ac..bc48151b9adb 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml @@ -13,6 +13,9 @@ description: | The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with IEC-60958 and IEC-61937. +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -57,7 +60,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index 30f6b029ac08..1085592cefcc 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -22,6 +22,9 @@ description: | https://www.ti.com/lit/gpn/tas2564 https://www.ti.com/lit/gpn/tas2110 +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -58,7 +61,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index bc90e72bf7cf..982949ba8a4b 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -16,6 +16,9 @@ description: | Integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -60,7 +63,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 66a0df8850ea..0957dd435bb4 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -16,6 +16,9 @@ description: | loudspeakers. Integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -53,7 +56,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml index 9681b72b4918..988ce8d8028f 100644 --- a/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml @@ -14,7 +14,7 @@ maintainers: - Matt Flax <flatmax@flatmax.com> allOf: - - $ref: name-prefix.yaml# + - $ref: dai-common.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml index 83936f594d1a..ede14ca2c07a 100644 --- a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml @@ -14,6 +14,9 @@ description: | https://www.ti.com/product/TLV320ADC3001 https://www.ti.com/product/TLV320ADC3101 +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -106,7 +109,7 @@ required: - reg - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml index 1627c0bb69be..8156f30eadd6 100644 --- a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml @@ -16,6 +16,9 @@ description: | This document lists sound specific bindings, see the primary binding document ../mfd/arizona.yaml +allOf: + - $ref: dai-common.yaml# + properties: '#sound-dai-cells': description: diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml index 15795f63b5a3..858c0f689581 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml @@ -61,6 +61,7 @@ required: - DCVDD-supply allOf: + - $ref: dai-common.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml index 7386abb3a250..3e809217c4ca 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml @@ -9,6 +9,9 @@ title: Wolfson WM8940 Codec maintainers: - patches@opensource.cirrus.com +allOf: + - $ref: dai-common.yaml# + properties: '#sound-dai-cells': const: 0 @@ -27,7 +30,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml new file mode 100644 index 000000000000..f58078545569 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8961.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8961 Ultra-Low Power Stereo CODEC + +maintainers: + - patches@opensource.cirrus.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: wlf,wm8961 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + wm8961: codec@4a { + compatible = "wlf,wm8961"; + reg = <0x4a>; + #sound-dai-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml index 5e172e9462b9..5fe0b2c9f99f 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml @@ -9,6 +9,9 @@ title: Wolfson WM8962 Ultra-Low Power Stereo CODEC maintainers: - patches@opensource.cirrus.com +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: wlf,wm8962 @@ -87,7 +90,7 @@ required: - SPKVDD1-supply - SPKVDD2-supply -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml index 1c8985d4dd5a..efb5f9f6cc7a 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml @@ -9,6 +9,9 @@ title: Wolfson WM8978 Codec maintainers: - patches@opensource.cirrus.com +allOf: + - $ref: dai-common.yaml# + properties: '#sound-dai-cells': const: 0 @@ -27,7 +30,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/zl38060.yaml index 338e2a13c775..2c5c02e34573 100644 --- a/Documentation/devicetree/bindings/sound/zl38060.yaml +++ b/Documentation/devicetree/bindings/sound/zl38060.yaml @@ -15,6 +15,9 @@ maintainers: - Jaroslav Kysela <perex@perex.cz> - Takashi Iwai <tiwai@suse.com> +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: mscc,zl38060 @@ -48,7 +51,7 @@ required: - gpio-controller - '#sound-dai-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 0c10f7678178..53eb6562b979 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -10,9 +10,6 @@ title: Amlogic Meson SPI Communication Controller maintainers: - Neil Armstrong <neil.armstrong@linaro.org> -allOf: - - $ref: "spi-controller.yaml#" - description: | The Meson SPICC is a generic SPI controller for general purpose Full-Duplex communications with dedicated 16 words RX/TX PIO FIFOs. @@ -43,31 +40,53 @@ properties: minItems: 1 maxItems: 2 -if: - properties: - compatible: - contains: - enum: - - amlogic,meson-g12a-spicc - -then: - properties: - clocks: - minItems: 2 - - clock-names: - items: - - const: core - - const: pclk - -else: - properties: - clocks: - maxItems: 1 - - clock-names: - items: - - const: core +allOf: + - $ref: "spi-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-spicc + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: core + - const: pclk + + else: + properties: + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-gx-spicc + + then: + properties: + pinctrl-0: true + pinctrl-1: true + pinctrl-2: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: idle-high + - const: idle-low required: - compatible diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 50df1a40bbe3..12cb76711000 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -23,6 +23,9 @@ properties: - const: fsl,imx51-ecspi - const: fsl,imx53-ecspi - items: + - const: fsl,imx8mp-ecspi + - const: fsl,imx6ul-ecspi + - items: - enum: - fsl,imx50-ecspi - fsl,imx6q-ecspi @@ -34,7 +37,6 @@ properties: - fsl,imx8mq-ecspi - fsl,imx8mm-ecspi - fsl,imx8mn-ecspi - - fsl,imx8mp-ecspi - const: fsl,imx51-ecspi reg: diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt index c63ce4cc0a80..fb38e96d395f 100644 --- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt @@ -51,7 +51,7 @@ fiu3: spi@c00000000 { clocks = <&clk NPCM7XX_CLK_AHB>; pinctrl-names = "default"; pinctrl-0 = <&spi3_pins>; - spi-nor@0 { + flash@0 { ... }; }; diff --git a/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml b/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml new file mode 100644 index 000000000000..4e0d391e1d69 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nuvoton,wpcm450-fiu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton WPCM450 Flash Interface Unit (FIU) + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + const: nuvoton,wpcm450-fiu + + reg: + items: + - description: FIU registers + - description: Memory-mapped flash contents + + reg-names: + items: + - const: control + - const: memory + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + nuvoton,shm: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to the SHM block (see ../arm/nuvoton,shm.yaml) + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + spi@c8000000 { + compatible = "nuvoton,wpcm450-fiu"; + reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + reg-names = "control", "memory"; + clocks = <&clk 0>; + nuvoton,shm = <&shm>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; + }; + + shm: syscon@c8001000 { + compatible = "nuvoton,wpcm450-shm", "syscon"; + reg = <0xc8001000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml b/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml new file mode 100644 index 000000000000..9878d1446552 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/socionext,f-ospi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext F_OSPI controller + +description: | + The Socionext F_OSPI is a controller used to interface with flash + memories using the SPI communication interface. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: socionext,f-ospi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + num-cs: + minimum: 1 + maximum: 4 + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + ospi0: spi@80000000 { + compatible = "socionext,f-ospi"; + reg = <0x80000000 0x1000>; + clocks = <&clks 0>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "spansion,s25fl128s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml new file mode 100644 index 000000000000..45cbe744c7ff --- /dev/null +++ b/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/socionext,synquacer-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext SynQuacer HS-SPI Controller + +maintainers: + - Masahisa Kojima <masahisa.kojima@linaro.org> + - Jassi Brar <jaswinder.singh@linaro.org> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: socionext,synquacer-spi + + reg: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: core clock + - description: rate clock + + clock-names: + minItems: 1 + items: + - const: iHCLK + - const: iPCLK + + interrupts: + items: + - description: Receive Interrupt + - description: Transmit Interrupt + - description: Fault Interrupt + + socionext,use-rtm: + type: boolean + description: Enable using "retimed clock" for RX + + socionext,set-aces: + type: boolean + description: Enable same active clock edges field to be set + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@ff110000 { + compatible = "socionext,synquacer-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_hsspi>; + clock-names = "iHCLK"; + socionext,use-rtm; + socionext,set-aces; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 8b44284d30c6..94caa2b7e241 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -56,6 +56,13 @@ properties: this property to re-config the chipselect value in the LPSPI driver. type: boolean + num-cs: + description: + number of chip selects. + minimum: 1 + maximum: 2 + default: 1 + required: - compatible - reg @@ -80,4 +87,5 @@ examples: clock-names = "per", "ipg"; spi-slave; fsl,spi-only-use-cs1-sel; + num-cs = <2>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index dca677f9e1b9..ead2cccf658f 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -44,6 +44,11 @@ properties: description: Maximum SPI clocking speed of the device in Hz. + spi-cs-setup-ns: + description: + Delay in nanosecods to be introduced by the controller after CS is + asserted. + spi-rx-bus-width: description: Bus width to the SPI bus used for read transfers. diff --git a/Documentation/devicetree/bindings/spi/spi-synquacer.txt b/Documentation/devicetree/bindings/spi/spi-synquacer.txt deleted file mode 100644 index 291dfa692d0a..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-synquacer.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Socionext Synquacer HS-SPI bindings - -Required Properties: -- compatible: should be "socionext,synquacer-spi" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts. -- clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK) -- clock-names: Shall be "iHCLK" and "iPCLK" respectively - -Optional Properties: -- socionext,use-rtm: boolean, if required to use "retimed clock" for RX -- socionext,set-aces: boolean, if same active clock edges field to be set. - -Example: - - spi0: spi@ff110000 { - compatible = "socionext,synquacer-spi"; - reg = <0xff110000 0x1000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_hsspi>; - clock-names = "iHCLK"; - socionext,use-rtm; - socionext,set-aces; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml index 6bf0edc57f4a..546c416cdb55 100644 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -14,7 +14,9 @@ allOf: properties: compatible: - const: xlnx,zynqmp-qspi-1.0 + enum: + - xlnx,versal-qspi-1.0 + - xlnx,zynqmp-qspi-1.0 reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml index e9199190198d..665c06e14f79 100644 --- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml @@ -25,6 +25,7 @@ properties: - qcom,sdm630-imem - qcom,sdm845-imem - qcom,sdx55-imem + - qcom,sdx65-imem - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index feb390d50696..d20569b9b763 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -222,8 +222,8 @@ examples: qcom,hw-settle-time = <200>; }; - conn-therm@47 { - reg = <PM8350_ADC7_AMUX_THM4_100K_PU>; + conn-therm@147 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,ratiometric; qcom,hw-settle-time = <200>; }; @@ -247,7 +247,7 @@ examples: conn-therm@1 { reg = <1>; - io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,avg-samples = <2>; qcom,ratiometric; qcom,hw-settle-time-us = <200>; diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml index a4f51f46b7a1..716c6afcca1f 100644 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -31,6 +31,8 @@ properties: - enum: - fsl,imx6sl-gpt - fsl,imx6sx-gpt + - fsl,imxrt1050-gpt + - fsl,imxrt1170-gpt - const: fsl,imx6dl-gpt reg: diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml index 737af78ad70c..d53e1bb98b8a 100644 --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml @@ -25,7 +25,13 @@ properties: - description: The timer interrupt of timer 0 clocks: - maxItems: 1 + items: + - description: The reference clock for timer 0 + - description: The reference clock for timer 1 + - description: The reference clock for timer 2 + - description: The reference clock for timer 3 + - description: The reference clock for timer 4 + minItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml index bde6c9b66bf4..a0be1755ea28 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml @@ -102,12 +102,14 @@ properties: - enum: - renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U - renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8 + - renesas,r8a779g0-cmt0 # 32-bit CMT0 on R-Car V4H - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4 - items: - enum: - renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U - renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8 + - renesas,r8a779g0-cmt1 # 48-bit CMT on R-Car V4H - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml index 60f4c059bcff..a67e427a9e7e 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml @@ -38,6 +38,7 @@ properties: - renesas,tmu-r8a77995 # R-Car D3 - renesas,tmu-r8a779a0 # R-Car V3U - renesas,tmu-r8a779f0 # R-Car S4-8 + - renesas,tmu-r8a779g0 # R-Car V4H - const: renesas,tmu reg: diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml index dc3bc1e62fe9..b61ed1a431bb 100644 --- a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml +++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml @@ -18,6 +18,7 @@ properties: - enum: - rockchip,rv1108-timer - rockchip,rk3036-timer + - rockchip,rk3128-timer - rockchip,rk3188-timer - rockchip,rk3228-timer - rockchip,rk3229-timer diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index c5f629c5bc61..994818cb6044 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -30,6 +30,7 @@ properties: - allwinner,sun4i-a10-ehci - allwinner,sun50i-a64-ehci - allwinner,sun50i-h6-ehci + - allwinner,sun50i-h616-ehci - allwinner,sun5i-a13-ehci - allwinner,sun6i-a31-ehci - allwinner,sun7i-a20-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index f838f78d6164..4fcbd0add49d 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -20,6 +20,7 @@ properties: - allwinner,sun4i-a10-ohci - allwinner,sun50i-a64-ohci - allwinner,sun50i-h6-ohci + - allwinner,sun50i-h616-ohci - allwinner,sun5i-a13-ohci - allwinner,sun6i-a31-ohci - allwinner,sun7i-a20-ohci diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt deleted file mode 100644 index 5bfcc0b4d6b9..000000000000 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt +++ /dev/null @@ -1,132 +0,0 @@ -NVIDIA Tegra xHCI controller -============================ - -The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by -the Tegra XUSB pad controller. - -Required properties: --------------------- -- compatible: Must be: - - Tegra124: "nvidia,tegra124-xusb" - - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb" - - Tegra210: "nvidia,tegra210-xusb" - - Tegra186: "nvidia,tegra186-xusb" -- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI - registers and XUSB IPFS registers. -- reg-names: Must contain the following entries: - - "hcd" - - "fpci" - - "ipfs" -- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt. -- clocks: Must contain an entry for each entry in clock-names. - See ../clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - xusb_host - - xusb_host_src - - xusb_falcon_src - - xusb_ss - - xusb_ss_src - - xusb_ss_div2 - - xusb_hs_src - - xusb_fs_src - - pll_u_480m - - clk_m - - pll_e -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - xusb_host - - xusb_ss - - xusb_src - Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src. -- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to - configure the USB pads used by the XHCI controller - -For Tegra124 and Tegra132: -- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. -- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V. -- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V. -- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. - -For Tegra210: -- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. -- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. -- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. - -For Tegra210 and Tegra186: -- power-domains: A list of PM domain specifiers that reference each power-domain - used by the xHCI controller. This list must comprise of a specifier for the - XUSBA and XUSBC power-domains. See ../power/power_domain.txt and - ../arm/tegra/nvidia,tegra20-pmc.txt for details. -- power-domain-names: A list of names that represent each of the specifiers in - the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which - represent the power-domains XUSBA and XUSBC, respectively. See - ../power/power_domain.txt for details. - -Optional properties: --------------------- -- phys: Must contain an entry for each entry in phy-names. - See ../phy/phy-bindings.txt for details. -- phy-names: Should include an entry for each PHY used by the controller. The - following PHYs are available: - - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 - - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 - - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2, - usb3-3 - - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2 - -Example: --------- - - usb@0,70090000 { - compatible = "nvidia,tegra124-xusb"; - reg = <0x0 0x70090000 0x0 0x8000>, - <0x0 0x70098000 0x0 0x1000>, - <0x0 0x70099000 0x0 0x1000>; - reg-names = "hcd", "fpci", "ipfs"; - - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, - <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_SS>, - <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, - <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, - <&tegra_car TEGRA124_CLK_PLL_U_480M>, - <&tegra_car TEGRA124_CLK_CLK_M>, - <&tegra_car TEGRA124_CLK_PLL_E>; - clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", - "xusb_ss", "xusb_ss_div2", "xusb_ss_src", - "xusb_hs_src", "xusb_fs_src", "pll_u_480m", - "clk_m", "pll_e"; - resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; - reset-names = "xusb_host", "xusb_ss", "xusb_src"; - - nvidia,xusb-padctl = <&padctl>; - - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */ - phy-names = "usb2-1", "usb2-2", "usb3-0"; - - avddio-pex-supply = <&vdd_1v05_run>; - dvddio-pex-supply = <&vdd_1v05_run>; - avdd-usb-supply = <&vdd_3v3_lp0>; - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-pll-erefe-supply = <&avdd_1v05_run>; - avdd-usb-ss-pll-supply = <&vdd_1v05_run>; - hvdd-usb-ss-supply = <&vdd_3v3_lp0>; - hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; - }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml new file mode 100644 index 000000000000..4a6616bf9bab --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + # required + compatible: + oneOf: + - description: NVIDIA Tegra124 + const: nvidia,tegra124-xusb + + - description: NVIDIA Tegra132 + items: + - const: nvidia,tegra132-xusb + - const: nvidia,tegra124-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + - description: base and length of the XUSB IPFS registers + + reg-names: + items: + - const: hcd + - const: fpci + - const: ipfs + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB host source clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed clock divider + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_host_src + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_div2 + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + resets: + items: + - description: reset for the XUSB host controller + - description: reset for the SuperSpeed logic + - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src. + + reset-names: + items: + - const: xusb_host + - const: xusb_ss + - const: xusb_src + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + # optional + phys: + minItems: 1 + maxItems: 7 + + phy-names: + minItems: 1 + maxItems: 7 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - hsic-0 + - hsic-1 + - usb3-0 + - usb3-1 + + avddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + dvddio-pex-supply: + description: PCIe/USB3 digital logic power supply. Must supply 1.05 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-erefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + avdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 3.3 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 3.3 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - resets + - reset-names + - nvidia,xusb-padctl + - phys + - phy-names + - avddio-pex-supply + - dvddio-pex-supply + - avdd-usb-supply + - hvdd-usb-ss-supply + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@70090000 { + compatible = "nvidia,tegra124-xusb"; + reg = <0x70090000 0x8000>, + <0x70098000 0x1000>, + <0x70099000 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, + <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA124_CLK_PLL_U_480M>, + <&tegra_car TEGRA124_CLK_CLK_M>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", + "xusb_ss", "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", "pll_u_480m", + "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */ + <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */ + <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */ + phy-names = "usb2-1", "usb2-2", "usb3-0"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-usb-supply = <&vdd_3v3_lp0>; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-usb-ss-pll-supply = <&vdd_1v05_run>; + hvdd-usb-ss-supply = <&vdd_3v3_lp0>; + hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml new file mode 100644 index 000000000000..6f62944fc597 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra186-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + + reg-names: + items: + - const: hcd + - const: fpci + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + interconnects: + items: + - description: read client + - description: write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 7 + + phy-names: + minItems: 1 + maxItems: 7 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - hsic-0 + - usb3-0 + - usb3-1 + - usb3-2 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + usb@3530000 { + compatible = "nvidia,tegra186-xusb"; + reg = <0x03530000 0x8000>, + <0x03538000 0x1000>; + reg-names = "hcd", "fpci"; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, + <&bpmp TEGRA186_CLK_XUSB_FALCON>, + <&bpmp TEGRA186_CLK_XUSB_SS>, + <&bpmp TEGRA186_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_XUSB_FS>, + <&bpmp TEGRA186_CLK_PLLU>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss", + "xusb_ss_src", "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_XUSB_HOST>; + nvidia,xusb-padctl = <&padctl>; + + #address-cells = <1>; + #size-cells = <0>; + + phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>; + phy-names = "usb2-0", "usb2-1", "usb3-0"; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml new file mode 100644 index 000000000000..65ae9ae9b0b7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra194-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra194-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + + reg-names: + items: + - const: hcd + - const: fpci + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + interconnects: + items: + - description: read client + - description: write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + maxItems: 8 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - usb2-3 + - usb3-0 + - usb3-1 + - usb3-2 + - usb3-3 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra194-mc.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + usb@3610000 { + compatible = "nvidia,tegra194-xusb"; + reg = <0x03610000 0x40000>, + <0x03600000 0x10000>; + reg-names = "hcd", "fpci"; + + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>, + <&bpmp TEGRA194_CLK_XUSB_FALCON>, + <&bpmp TEGRA194_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA194_CLK_XUSB_SS>, + <&bpmp TEGRA194_CLK_CLK_M>, + <&bpmp TEGRA194_CLK_XUSB_FS>, + <&bpmp TEGRA194_CLK_UTMIPLL>, + <&bpmp TEGRA194_CLK_CLK_M>, + <&bpmp TEGRA194_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", + "xusb_ss", "xusb_ss_src", "xusb_hs_src", + "xusb_fs_src", "pll_u_480m", "clk_m", + "pll_e"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_XUSB_HOST>; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&xusb_padctl>; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; + phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3"; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml new file mode 100644 index 000000000000..da1e1ec0e7c8 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra210-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra210-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + - description: base and length of the XUSB IPFS registers + + reg-names: + items: + - const: hcd + - const: fpci + - const: ipfs + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB host source clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed clock divider + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_host_src + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_div2 + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + resets: + items: + - description: reset for the XUSB host controller + - description: reset for the SuperSpeed logic + - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src. + + reset-names: + items: + - const: xusb_host + - const: xusb_ss + - const: xusb_src + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 9 + + phy-names: + minItems: 1 + maxItems: 9 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - usb2-3 + - hsic-0 + - usb3-0 + - usb3-1 + - usb3-2 + - usb3-3 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@70090000 { + compatible = "nvidia,tegra210-xusb"; + reg = <0x70090000 0x8000>, + <0x70098000 0x1000>, + <0x70099000 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>, + <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA210_CLK_PLL_U_480M>, + <&tegra_car TEGRA210_CLK_CLK_M>, + <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", + "xusb_falcon_src", "xusb_ss", + "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, + <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + power-domains = <&pd_xusbhost>, <&pd_xusbss>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0", + "usb3-1"; + dvddio-pex-supply = <&vdd_pex_1v05>; + hvddio-pex-supply = <&vdd_1v8>; + avdd-usb-supply = <&vdd_3v3_sys>; + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>; + hvdd-usb-ss-pll-e-supply = <&vdd_1v8>; + + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb955,9ff"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 6e323a380294..83ba9c4aac67 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -69,6 +69,8 @@ patternProperties: description: Annapurna Labs "^alcatel,.*": description: Alcatel + "^alfa-network,.*": + description: ALFA Network Inc. "^allegro,.*": description: Allegro DVT "^allo,.*": @@ -246,6 +248,8 @@ patternProperties: description: ChipOne "^chipspark,.*": description: ChipSPARK + "^chongzhou,.*": + description: Shenzhen Chongzhou Electronic Technology Co., Ltd "^chrontel,.*": description: Chrontel, Inc. "^chrp,.*": @@ -260,6 +264,8 @@ patternProperties: description: Cirrus Logic, Inc. "^cisco,.*": description: Cisco Systems, Inc. + "^cloos,.*": + description: Carl Cloos Schweisstechnik GmbH. "^cloudengines,.*": description: Cloud Engines, Inc. "^cnm,.*": @@ -605,6 +611,8 @@ patternProperties: description: Ingenic Semiconductor "^injoinic,.*": description: Injoinic Technology Corp. + "^innocomm,.*": + description: InnoComm Mobile Technology Corp. "^innolux,.*": description: Innolux Corporation "^inside-secure,.*": @@ -639,6 +647,8 @@ patternProperties: description: ITian Corporation "^iwave,.*": description: iWave Systems Technologies Pvt. Ltd. + "^jadard,.*": + description: Jadard Technology Inc. "^jdi,.*": description: Japan Display Inc. "^jedec,.*": @@ -883,6 +893,8 @@ patternProperties: description: Shenzhen Netxeon Technology CO., LTD "^neweast,.*": description: Guangdong Neweast Optoelectronics CO., LTD + "^newvision,.*": + description: New Vision Display (Shenzhen) Co., Ltd. "^nexbox,.*": description: Nexbox "^nextthing,.*": |