diff options
Diffstat (limited to 'Documentation/hwmon')
| -rw-r--r-- | Documentation/hwmon/adm1177.rst | 3 | ||||
| -rw-r--r-- | Documentation/hwmon/aquacomputer_d5next.rst | 61 | ||||
| -rw-r--r-- | Documentation/hwmon/dps920ab.rst | 73 | ||||
| -rw-r--r-- | Documentation/hwmon/index.rst | 6 | ||||
| -rw-r--r-- | Documentation/hwmon/ir36021.rst | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/lm75.rst | 6 | ||||
| -rw-r--r-- | Documentation/hwmon/ltc2992.rst | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/max31790.rst | 5 | ||||
| -rw-r--r-- | Documentation/hwmon/mp2888.rst | 113 | ||||
| -rw-r--r-- | Documentation/hwmon/pim4328.rst | 105 | ||||
| -rw-r--r-- | Documentation/hwmon/pm6764tr.rst | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/pmbus-core.rst | 42 | ||||
| -rw-r--r-- | Documentation/hwmon/pmbus.rst | 11 | ||||
| -rw-r--r-- | Documentation/hwmon/sbrmi.rst | 79 | ||||
| -rw-r--r-- | Documentation/hwmon/scpi-hwmon.rst | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/sht4x.rst | 45 | ||||
| -rw-r--r-- | Documentation/hwmon/zl6100.rst | 132 |
17 files changed, 629 insertions, 60 deletions
diff --git a/Documentation/hwmon/adm1177.rst b/Documentation/hwmon/adm1177.rst index 471be1e98d6f..1c85a2af92bf 100644 --- a/Documentation/hwmon/adm1177.rst +++ b/Documentation/hwmon/adm1177.rst @@ -20,7 +20,8 @@ Usage Notes ----------- This driver does not auto-detect devices. You will have to instantiate the -devices explicitly. Please see :doc:`/i2c/instantiating-devices` for details. +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst +for details. Sysfs entries diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst new file mode 100644 index 000000000000..1f4bb4ba2e4b --- /dev/null +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -0,0 +1,61 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver aquacomputer-d5next +================================= + +Supported devices: + +* Aquacomputer D5 Next watercooling pump + +Author: Aleksa Savic + +Description +----------- + +This driver exposes hardware sensors of the Aquacomputer D5 Next watercooling +pump, which communicates through a proprietary USB HID protocol. + +Available sensors are pump and fan speed, power, voltage and current, as +well as coolant temperature. Also available through debugfs are the serial +number, firmware version and power-on count. + +Attaching a fan is optional and allows it to be controlled using temperature +curves directly from the pump. If it's not connected, the fan-related sensors +will report zeroes. + +The pump can be configured either through software or via its physical +interface. Configuring the pump through this driver is not implemented, as it +seems to require sending it a complete configuration. That includes addressable +RGB LEDs, for which there is no standard sysfs interface. Thus, that task is +better suited for userspace tools. + +Usage notes +----------- + +The pump communicates via HID reports. The driver is loaded automatically by +the kernel and supports hotswapping. + +Sysfs entries +------------- + +============ ============================================= +temp1_input Coolant temperature (in millidegrees Celsius) +fan1_input Pump speed (in RPM) +fan2_input Fan speed (in RPM) +power1_input Pump power (in micro Watts) +power2_input Fan power (in micro Watts) +in0_input Pump voltage (in milli Volts) +in1_input Fan voltage (in milli Volts) +in2_input +5V rail voltage (in milli Volts) +curr1_input Pump current (in milli Amperes) +curr2_input Fan current (in milli Amperes) +============ ============================================= + +Debugfs entries +--------------- + +================ =============================================== +serial_number Serial number of the pump +firmware_version Version of installed firmware +power_cycles Count of how many times the pump was powered on +================ =============================================== diff --git a/Documentation/hwmon/dps920ab.rst b/Documentation/hwmon/dps920ab.rst new file mode 100644 index 000000000000..c33b4cdc0a60 --- /dev/null +++ b/Documentation/hwmon/dps920ab.rst @@ -0,0 +1,73 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver dps920ab +======================== + +Supported chips: + + * Delta DPS920AB + + Prefix: 'dps920ab' + + Addresses scanned: - + +Authors: + Robert Marko <robert.marko@sartura.hr> + + +Description +----------- + +This driver implements support for Delta DPS920AB 920W 54V DC single output +power supply with PMBus support. + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + + +Sysfs entries +------------- + +======================= ====================================================== +curr1_label "iin" +curr1_input Measured input current +curr1_alarm Input current high alarm + +curr2_label "iout1" +curr2_input Measured output current +curr2_max Maximum output current +curr2_rated_max Maximum rated output current + +in1_label "vin" +in1_input Measured input voltage +in1_alarm Input voltage alarm + +in2_label "vout1" +in2_input Measured output voltage +in2_rated_min Minimum rated output voltage +in2_rated_max Maximum rated output voltage +in2_alarm Output voltage alarm + +power1_label "pin" +power1_input Measured input power +power1_alarm Input power high alarm + +power2_label "pout1" +power2_input Measured output power +power2_rated_max Maximum rated output power + +temp[1-3]_input Measured temperature +temp[1-3]_alarm Temperature alarm + +fan1_alarm Fan 1 warning. +fan1_fault Fan 1 fault. +fan1_input Fan 1 speed in RPM. +======================= ====================================================== diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 9ed60fa84cbe..f790f1260c33 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -39,6 +39,7 @@ Hardware Monitoring Kernel Drivers adt7475 aht10 amc6821 + aquacomputer_d5next asb100 asc7621 aspeed-pwm-tacho @@ -53,6 +54,7 @@ Hardware Monitoring Kernel Drivers da9055 dell-smm-hwmon dme1737 + dps920ab drivetemp ds1621 ds620 @@ -137,6 +139,7 @@ Hardware Monitoring Kernel Drivers mcp3021 menf21bmc mlxreg-fan + mp2888 mp2975 nct6683 nct6775 @@ -150,6 +153,7 @@ Hardware Monitoring Kernel Drivers pc87360 pc87427 pcf8591 + pim4328 pm6764tr pmbus powr1220 @@ -157,6 +161,7 @@ Hardware Monitoring Kernel Drivers pwm-fan q54sj108a2 raspberrypi-hwmon + sbrmi sbtsi_temp sch5627 sch5636 @@ -164,6 +169,7 @@ Hardware Monitoring Kernel Drivers sht15 sht21 sht3x + sht4x shtc1 sis5595 sl28cpld diff --git a/Documentation/hwmon/ir36021.rst b/Documentation/hwmon/ir36021.rst index ca3436b04e20..1faa85c39f1b 100644 --- a/Documentation/hwmon/ir36021.rst +++ b/Documentation/hwmon/ir36021.rst @@ -19,7 +19,7 @@ Authors: Description ----------- -The IR36021 is a dual‐loop digital multi‐phase buck controller designed for +The IR36021 is a dual-loop digital multi-phase buck controller designed for point of load applications. Usage Notes diff --git a/Documentation/hwmon/lm75.rst b/Documentation/hwmon/lm75.rst index 81257d5fc48f..8d0ab4ad5fb5 100644 --- a/Documentation/hwmon/lm75.rst +++ b/Documentation/hwmon/lm75.rst @@ -93,9 +93,9 @@ Supported chips: https://www.st.com/resource/en/datasheet/stlm75.pdf - * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275 + * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275, TMP1075 - Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275' + Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275', 'tmp1075' Addresses scanned: none @@ -119,6 +119,8 @@ Supported chips: https://www.ti.com/product/tmp275 + https://www.ti.com/product/TMP1075 + * NXP LM75B, PCT2075 Prefix: 'lm75b', 'pct2075' diff --git a/Documentation/hwmon/ltc2992.rst b/Documentation/hwmon/ltc2992.rst index 46aa1aa84a1a..a0bcd867a0f5 100644 --- a/Documentation/hwmon/ltc2992.rst +++ b/Documentation/hwmon/ltc2992.rst @@ -19,7 +19,7 @@ This driver supports hardware monitoring for Linear Technology LTC2992 power mon LTC2992 is a rail-to-rail system monitor that measures current, voltage, and power of two supplies. -Two ADCs simultaneously measure each supply’s current. A third ADC monitors +Two ADCs simultaneously measure each supply's current. A third ADC monitors the input voltages and four auxiliary external voltages. diff --git a/Documentation/hwmon/max31790.rst b/Documentation/hwmon/max31790.rst index f301385d8cef..7b097c3b9b90 100644 --- a/Documentation/hwmon/max31790.rst +++ b/Documentation/hwmon/max31790.rst @@ -38,6 +38,7 @@ Sysfs entries fan[1-12]_input RO fan tachometer speed in RPM fan[1-12]_fault RO fan experienced fault fan[1-6]_target RW desired fan speed in RPM -pwm[1-6]_enable RW regulator mode, 0=disabled, 1=manual mode, 2=rpm mode -pwm[1-6] RW fan target duty cycle (0-255) +pwm[1-6]_enable RW regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode +pwm[1-6] RW read: current pwm duty cycle, + write: target pwm duty cycle (0-255) ================== === ======================================================= diff --git a/Documentation/hwmon/mp2888.rst b/Documentation/hwmon/mp2888.rst new file mode 100644 index 000000000000..5e578fd7b147 --- /dev/null +++ b/Documentation/hwmon/mp2888.rst @@ -0,0 +1,113 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2888 +==================== + +Supported chips: + + * MPS MP12254 + + Prefix: 'mp2888' + +Author: + + Vadim Pasternak <vadimp@nvidia.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +vendor dual-loop, digital, multi-phase controller MP2888. + +This device: supports: + +- One power rail. +- Programmable Multi-Phase up to 10 Phases. +- PWM-VID Interface +- One pages 0 for telemetry. +- Programmable pins for PMBus Address. +- Built-In EEPROM to Store Custom Configurations. + +Device complaint with: + +- PMBus rev 1.3 interface. + +Device supports direct format for reading output current, output voltage, +input and output power and temperature. +Device supports linear format for reading input voltage and input power. + +The driver provides the next attributes for the current: + +- for current out input and maximum alarm; +- for phase current: input and label. + +The driver exports the following attributes via the 'sysfs' files, where: + +- 'n' is number of configured phases (from 1 to 10); +- index 1 for "iout"; +- indexes 2 ... 1 + n for phases. + +**curr[1-{1+n}]_input** + +**curr[1-{1+n}]_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the next attributes for the voltage: + +- for voltage in: input, low and high critical thresholds, low and high + critical alarms; +- for voltage out: input and high alarm; + +The driver exports the following attributes via the 'sysfs' files, where + +**in1_crit** + +**in1_crit_alarm** + +**in1_input** + +**in1_label** + +**in1_min** + +**in1_min_alarm** + +**in2_alarm** + +**in2_input** + +**in2_label** + +The driver provides the next attributes for the power: + +- for power in alarm and input. +- for power out: cap, cap alarm an input. + +The driver exports the following attributes via the 'sysfs' files, where +- indexes 1 for "pin"; +- indexes 2 for "pout"; + +**power1_alarm** + +**power1_input** + +**power1_label** + +**power2_input** + +**power2_label** + +**power2_max** + +**power2_max_alarm** + +The driver provides the next attributes for the temperature: + +**temp1_input** + +**temp1_max** + +**temp1_max_alarm** diff --git a/Documentation/hwmon/pim4328.rst b/Documentation/hwmon/pim4328.rst new file mode 100644 index 000000000000..70c9e7a6882c --- /dev/null +++ b/Documentation/hwmon/pim4328.rst @@ -0,0 +1,105 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver pim4328 +===================== + +Supported chips: + + * Flex PIM4328 + + Prefix: 'pim4328', 'bmr455' + + Addresses scanned: - + + Datasheet: + +https://flexpowermodules.com/resources/fpm-techspec-pim4328 + + * Flex PIM4820 + + Prefixes: 'pim4820' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-pim4820 + + * Flex PIM4006, PIM4106, PIM4206, PIM4306, PIM4406 + + Prefixes: 'pim4006', 'pim4106', 'pim4206', 'pim4306', 'pim4406' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-pim4006 + +Author: Erik Rosen <erik.rosen@metormote.com> + + +Description +----------- + +This driver supports hardware monitoring for Flex PIM4328 and +compatible digital power interface modules. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details +on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. All attributes are read-only. + +======================= ======================================================== +in1_label "vin" +in1_input Measured input voltage. +in1_alarm Input voltage alarm. + +in2_label "vin.0" +in2_input Measured input voltage on input A. + + PIM4328 and PIM4X06 + +in3_label "vin.1" +in3_input Measured input voltage on input B. + + PIM4328 and PIM4X06 + +in4_label "vcap" +in4_input Measured voltage on holdup capacitor. + + PIM4328 + +curr1_label "iin.0" +curr1_input Measured input current on input A. + + PIM4X06 + +curr2_label "iin.1" +curr2_input Measured input current on input B. + + PIM4X06 + +currX_label "iout1" +currX_input Measured output current. +currX_alarm Output current alarm. + + X is 1 for PIM4820, 3 otherwise. + +temp1_input Measured temperature. +temp1_alarm High temperature alarm. +======================= ======================================================== diff --git a/Documentation/hwmon/pm6764tr.rst b/Documentation/hwmon/pm6764tr.rst index a1fb8fea2326..294a8ffc8bd8 100644 --- a/Documentation/hwmon/pm6764tr.rst +++ b/Documentation/hwmon/pm6764tr.rst @@ -20,7 +20,7 @@ Description: ------------ This driver supports the STMicroelectronics PM6764TR chip. The PM6764TR is a high -performance digital controller designed to power Intel’s VR12.5 processors and memories. +performance digital controller designed to power Intel's VR12.5 processors and memories. The device utilizes digital technology to implement all control and power management functions to provide maximum flexibility and performance. The NVM is embedded to store diff --git a/Documentation/hwmon/pmbus-core.rst b/Documentation/hwmon/pmbus-core.rst index 73e23ab42cc3..e7e0c9ef10be 100644 --- a/Documentation/hwmon/pmbus-core.rst +++ b/Documentation/hwmon/pmbus-core.rst @@ -289,12 +289,22 @@ PMBus driver platform data ========================== PMBus platform data is defined in include/linux/pmbus.h. Platform data -currently only provides a flag field with a single bit used:: +currently provides a flags field with four bits used:: - #define PMBUS_SKIP_STATUS_CHECK (1 << 0) + #define PMBUS_SKIP_STATUS_CHECK BIT(0) + + #define PMBUS_WRITE_PROTECTED BIT(1) + + #define PMBUS_NO_CAPABILITY BIT(2) + + #define PMBUS_READ_STATUS_AFTER_FAILED_CHECK BIT(3) struct pmbus_platform_data { u32 flags; /* Device specific flags */ + + /* regulator support */ + int num_regulators; + struct regulator_init_data *reg_init_data; }; @@ -302,8 +312,9 @@ Flags ----- PMBUS_SKIP_STATUS_CHECK - During register detection, skip checking the status register for - communication or command errors. + +During register detection, skip checking the status register for +communication or command errors. Some PMBus chips respond with valid data when trying to read an unsupported register. For such chips, checking the status register is mandatory when @@ -315,3 +326,26 @@ status register must be disabled. Some i2c controllers do not support single-byte commands (write commands with no data, i2c_smbus_write_byte()). With such controllers, clearing the status register is impossible, and the PMBUS_SKIP_STATUS_CHECK flag must be set. + +PMBUS_WRITE_PROTECTED + +Set if the chip is write protected and write protection is not determined +by the standard WRITE_PROTECT command. + +PMBUS_NO_CAPABILITY + +Some PMBus chips don't respond with valid data when reading the CAPABILITY +register. For such chips, this flag should be set so that the PMBus core +driver doesn't use CAPABILITY to determine it's behavior. + +PMBUS_READ_STATUS_AFTER_FAILED_CHECK + +Read the STATUS register after each failed register check. + +Some PMBus chips end up in an undefined state when trying to read an +unsupported register. For such chips, it is necessary to reset the +chip pmbus controller to a known state after a failed register check. +This can be done by reading a known register. By setting this flag the +driver will try to read the STATUS register after each failed +register check. This read may fail, but it will put the chip into a +known state. diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst index c44f14115413..7ecfec6ca2db 100644 --- a/Documentation/hwmon/pmbus.rst +++ b/Documentation/hwmon/pmbus.rst @@ -3,15 +3,18 @@ Kernel driver pmbus Supported chips: - * Ericsson BMR453, BMR454 + * Flex BMR310, BMR453, BMR454, BMR456, BMR457, BMR458, BMR480, + BMR490, BMR491, BMR492 - Prefixes: 'bmr453', 'bmr454' + Prefixes: 'bmr310', 'bmr453', 'bmr454', 'bmr456', 'bmr457', 'bmr458', 'bmr480', + 'bmr490', 'bmr491', 'bmr492' Addresses scanned: - - Datasheet: + Datasheets: + + https://flexpowermodules.com/products - http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395 * ON Semiconductor ADP4000, NCP4200, NCP4208 diff --git a/Documentation/hwmon/sbrmi.rst b/Documentation/hwmon/sbrmi.rst new file mode 100644 index 000000000000..296049e13ac9 --- /dev/null +++ b/Documentation/hwmon/sbrmi.rst @@ -0,0 +1,79 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver sbrmi +=================== + +Supported hardware: + + * Sideband Remote Management Interface (SB-RMI) compliant AMD SoC + device connected to the BMC via the APML. + + Prefix: 'sbrmi' + + Addresses scanned: This driver doesn't support address scanning. + + To instantiate this driver on an AMD CPU with SB-RMI + support, the i2c bus number would be the bus connected from the board + management controller (BMC) to the CPU. + The SMBus address is really 7 bits. Some vendors and the SMBus + specification show the address as 8 bits, left justified with the R/W + bit as a write (0) making bit 0. Some vendors use only the 7 bits + to describe the address. + As mentioned in AMD's APML specification, The SB-RMI address is + normally 78h(0111 100W) or 3Ch(011 1100) for socket 0 and 70h(0111 000W) + or 38h(011 1000) for socket 1, but it could vary based on hardware + address select pins. + + Datasheet: The SB-RMI interface and protocol along with the Advanced + Platform Management Link (APML) Specification is available + as part of the open source SoC register reference at: + + https://www.amd.com/en/support/tech-docs?keyword=55898 + +Author: Akshay Gupta <akshay.gupta@amd.com> + +Description +----------- + +The APML provides a way to communicate with the SB Remote Management interface +(SB-RMI) module from the external SMBus master that can be used to report socket +power on AMD platforms using mailbox command and resembles a typical 8-pin remote +power sensor's I2C interface to BMC. + +This driver implements current power with power cap and power cap max. + +sysfs-Interface +--------------- +Power sensors can be queried and set via the standard ``hwmon`` interface +on ``sysfs``, under the directory ``/sys/class/hwmon/hwmonX`` for some value +of ``X`` (search for the ``X`` such that ``/sys/class/hwmon/hwmonX/name`` has +content ``sbrmi``) + +================ ===== ======================================================== +Name Perm Description +================ ===== ======================================================== +power1_input RO Current Power consumed +power1_cap RW Power limit can be set between 0 and power1_cap_max +power1_cap_max RO Maximum powerlimit calculated and reported by the SMU FW +================ ===== ======================================================== + +The following example show how the 'Power' attribute from the i2c-addresses +can be monitored using the userspace utilities like ``sensors`` binary:: + + # sensors + sbrmi-i2c-1-38 + Adapter: bcm2835 I2C adapter + power1: 61.00 W (cap = 225.00 W) + + sbrmi-i2c-1-3c + Adapter: bcm2835 I2C adapter + power1: 28.39 W (cap = 224.77 W) + # + +Also, Below shows how get and set the values from sysfs entries individually:: + # cat /sys/class/hwmon/hwmon1/power1_cap_max + 225000000 + + # echo 180000000 > /sys/class/hwmon/hwmon1/power1_cap + # cat /sys/class/hwmon/hwmon1/power1_cap + 180000000 diff --git a/Documentation/hwmon/scpi-hwmon.rst b/Documentation/hwmon/scpi-hwmon.rst index eee7022b44db..1e3f83ec0658 100644 --- a/Documentation/hwmon/scpi-hwmon.rst +++ b/Documentation/hwmon/scpi-hwmon.rst @@ -32,5 +32,5 @@ Usage Notes The driver relies on device tree node to indicate the presence of SCPI support in the kernel. See -Documentation/devicetree/bindings/arm/arm,scpi.txt for details of the +Documentation/devicetree/bindings/firmware/arm,scpi.yaml for details of the devicetree node. diff --git a/Documentation/hwmon/sht4x.rst b/Documentation/hwmon/sht4x.rst new file mode 100644 index 000000000000..c318e5582ead --- /dev/null +++ b/Documentation/hwmon/sht4x.rst @@ -0,0 +1,45 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver sht4x +=================== + +Supported Chips: + + * Sensirion SHT4X + + Prefix: 'sht4x' + + Addresses scanned: None + + Datasheet: + + English: https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT4x_Datasheet.pdf + +Author: Navin Sankar Velliangiri <navin@linumiz.com> + + +Description +----------- + +This driver implements support for the Sensirion SHT4x chip, a humidity +and temperature sensor. Temperature is measured in degree celsius, relative +humidity is expressed as a percentage. In sysfs interface, all values are +scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. + +Usage Notes +----------- + +The device communicates with the I2C protocol. Sensors can have the I2C +address 0x44. See Documentation/i2c/instantiating-devices.rst for methods +to instantiate the device. + +Sysfs entries +------------- + +=============== ============================================ +temp1_input Measured temperature in millidegrees Celcius +humidity1_input Measured humidity in %H +update_interval The minimum interval for polling the sensor, + in milliseconds. Writable. Must be at least + 2000. +=============== ============================================ diff --git a/Documentation/hwmon/zl6100.rst b/Documentation/hwmon/zl6100.rst index 968aff10ce0a..d42ed9d3ac69 100644 --- a/Documentation/hwmon/zl6100.rst +++ b/Documentation/hwmon/zl6100.rst @@ -3,87 +3,103 @@ Kernel driver zl6100 Supported chips: - * Intersil / Zilker Labs ZL2004 + * Renesas / Intersil / Zilker Labs ZL2004 Prefix: 'zl2004' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6847.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2004-datasheet.pdf - * Intersil / Zilker Labs ZL2005 + * Renesas / Intersil / Zilker Labs ZL2005 Prefix: 'zl2005' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6848.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2005-datasheet.pdf - * Intersil / Zilker Labs ZL2006 + * Renesas / Intersil / Zilker Labs ZL2006 Prefix: 'zl2006' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6850.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2006-datasheet.pdf - * Intersil / Zilker Labs ZL2008 + * Renesas / Intersil / Zilker Labs ZL2008 Prefix: 'zl2008' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6859.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2008-datasheet.pdf - * Intersil / Zilker Labs ZL2105 + * Renesas / Intersil / Zilker Labs ZL2105 Prefix: 'zl2105' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6851.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2105-datasheet.pdf - * Intersil / Zilker Labs ZL2106 + * Renesas / Intersil / Zilker Labs ZL2106 Prefix: 'zl2106' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6852.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2106-datasheet.pdf - * Intersil / Zilker Labs ZL6100 + * Renesas / Intersil / Zilker Labs ZL6100 Prefix: 'zl6100' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6876.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl6100-datasheet.pdf - * Intersil / Zilker Labs ZL6105 + * Renesas / Intersil / Zilker Labs ZL6105 Prefix: 'zl6105' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn6906.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl6105-datasheet.pdf - * Intersil / Zilker Labs ZL9101M + * Renesas / Intersil / Zilker Labs ZL8802 + + Prefix: 'zl8802' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/zl8802-datasheet + + * Renesas / Intersil / Zilker Labs ZL9101M Prefix: 'zl9101' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn7669.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl9101m-datasheet - * Intersil / Zilker Labs ZL9117M + * Renesas / Intersil / Zilker Labs ZL9117M Prefix: 'zl9117' Addresses scanned: - - Datasheet: http://www.intersil.com/data/fn/fn7914.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl9117m-datasheet + + * Renesas / Intersil / Zilker Labs ZLS1003, ZLS4009 + + Prefix: 'zls1003', zls4009 + + Addresses scanned: - + + Datasheet: Not published - * Ericsson BMR450, BMR451 + * Flex BMR450, BMR451 Prefix: 'bmr450', 'bmr451' @@ -91,17 +107,39 @@ Supported chips: Datasheet: -http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401 +https://flexpowermodules.com/resources/fpm-techspec-bmr450-digital-pol-regulators-20a - * Ericsson BMR462, BMR463, BMR464 + * Flex BMR462, BMR463, BMR464 Prefixes: 'bmr462', 'bmr463', 'bmr464' Addresses scanned: - - Datasheet: + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr462 + + * Flex BMR465, BMR467 + + Prefixes: 'bmr465', 'bmr467' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr465-digital-pol + + * Flex BMR466 + + Prefixes: 'bmr466' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr466-8x12 - http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256 + * Flex BMR469 + + Prefixes: 'bmr469' + + Addresses scanned: - + + Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr4696001 Author: Guenter Roeck <linux@roeck-us.net> @@ -109,8 +147,8 @@ Author: Guenter Roeck <linux@roeck-us.net> Description ----------- -This driver supports hardware monitoring for Intersil / Zilker Labs ZL6100 and -compatible digital DC-DC controllers. +This driver supports hardware monitoring for Renesas / Intersil / Zilker Labs +ZL6100 and compatible digital DC-DC controllers. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details @@ -147,12 +185,12 @@ Module parameters delay ----- -Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C -bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms -appears to be sufficient and has not caused any problems in testing. The problem -is known to affect all currently supported chips. For manual override, the -driver provides a writeable module parameter, 'delay', which can be used to set -the interval to a value between 0 and 65,535 microseconds. +Renesas/Intersil/Zilker Labs DC-DC controllers require a minimum interval +between I2C bus accesses. According to Intersil, the minimum interval is 2 ms, +though 1 ms appears to be sufficient and has not caused any problems in testing. +The problem is known to affect all currently supported chips. For manual override, +the driver provides a writeable module parameter, 'delay', which can be used +to set the interval to a value between 0 and 65,535 microseconds. Sysfs entries @@ -182,24 +220,32 @@ in2_crit Critical maximum VMON/VDRV voltage. in2_lcrit_alarm VMON/VDRV voltage critical low alarm. in2_crit_alarm VMON/VDRV voltage critical high alarm. - vmon attributes are supported on ZL2004, ZL9101M, - and ZL9117M only. + vmon attributes are supported on ZL2004, ZL8802, + ZL9101M, ZL9117M and ZLS4009 only. -inX_label "vout1" +inX_label "vout[12]" inX_input Measured output voltage. inX_lcrit Critical minimum output Voltage. inX_crit Critical maximum output voltage. inX_lcrit_alarm Critical output voltage critical low alarm. inX_crit_alarm Critical output voltage critical high alarm. - X is 3 for ZL2004, ZL9101M, and ZL9117M, 2 otherwise. + X is 3 for ZL2004, ZL9101M, and ZL9117M, + 3, 4 for ZL8802 and 2 otherwise. + +curr1_label "iin" +curr1_input Measured input current. + + iin attributes are supported on ZL8802 only + +currY_label "iout[12]" +currY_input Measured output current. +currY_lcrit Critical minimum output current. +currY_crit Critical maximum output current. +currY_lcrit_alarm Output current critical low alarm. +currY_crit_alarm Output current critical high alarm. -curr1_label "iout1" -curr1_input Measured output current. -curr1_lcrit Critical minimum output current. -curr1_crit Critical maximum output current. -curr1_lcrit_alarm Output current critical low alarm. -curr1_crit_alarm Output current critical high alarm. + Y is 2, 3 for ZL8802, 1 otherwise temp[12]_input Measured temperature. temp[12]_min Minimum temperature. |