summaryrefslogtreecommitdiff
path: root/Documentation/sound/alsa-configuration.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/alsa-configuration.rst')
-rw-r--r--Documentation/sound/alsa-configuration.rst34
1 files changed, 32 insertions, 2 deletions
diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
index b36af65a08ed..65f61695f561 100644
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -1059,6 +1059,12 @@ The model name ``generic`` is treated as a special case. When this
model is given, the driver uses the generic codec parser without
"codec-patch". It's sometimes good for testing and debugging.
+The model option can be used also for aliasing to another PCI or codec
+SSID. When it's passed in the form of ``model=XXXX:YYYY`` where XXXX
+and YYYY are the sub-vendor and sub-device IDs in hex numbers,
+respectively, the driver will refer to that SSID as a reference to the
+quirk table.
+
If the default configuration doesn't work and one of the above
matches with your device, report it together with alsa-info.sh
output (with ``--no-upload`` option) to kernel bugzilla or alsa-devel
@@ -2252,6 +2258,27 @@ delayed_register
The driver prints a message like "Found post-registration device
assignment: 1234abcd:04" for such a device, so that user can
notice the need.
+quirk_flags
+ Contains the bit flags for various device specific workarounds.
+ Applied to the corresponding card index.
+
+ * bit 0: Skip reading sample rate for devices
+ * bit 1: Create Media Controller API entries
+ * bit 2: Allow alignment on audio sub-slot at transfer
+ * bit 3: Add length specifier to transfers
+ * bit 4: Start playback stream at first in implement feedback mode
+ * bit 5: Skip clock selector setup
+ * bit 6: Ignore errors from clock source search
+ * bit 7: Indicates ITF-USB DSD based DACs
+ * bit 8: Add a delay of 20ms at each control message handling
+ * bit 9: Add a delay of 1-2ms at each control message handling
+ * bit 10: Add a delay of 5-6ms at each control message handling
+ * bit 11: Add a delay of 50ms at each interface setup
+ * bit 12: Perform sample rate validations at probe
+ * bit 13: Disable runtime PM autosuspend
+ * bit 14: Ignore errors for mixer access
+ * bit 15: Support generic DSD raw U32_BE format
+ * bit 16: Set up the interface at first like UAC1
This module supports multiple devices, autoprobe and hotplugging.
@@ -2261,11 +2288,14 @@ check.
NB: ``ignore_ctl_error=1`` may help when you get an error at accessing
the mixer element such as URB error -22. This happens on some
-buggy USB device or the controller.
+buggy USB device or the controller. This workaround corresponds to
+the ``quirk_flags`` bit 14, too.
-NB: quirk_alias option is provided only for testing / development.
+NB: ``quirk_alias`` option is provided only for testing / development.
If you want to have a proper support, contact to upstream for
adding the matching quirk in the driver code statically.
+Ditto for ``quirk_flags``. If a device is known to require specific
+workarounds, please report to the upstream.
Module snd-usb-caiaq
--------------------