diff options
Diffstat (limited to 'Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst')
| -rw-r--r-- | Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 672 |
1 files changed, 252 insertions, 420 deletions
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 00944e97d638..b0de4e6e7ebd 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -392,7 +392,7 @@ enum v4l2_mpeg_audio_mode_extension - which subbands are in intensity stereo. All other subbands are coded in stereo. Layer III is not (yet) supported. Possible values are: - +.. tabularcolumns:: |p{9.1cm}|p{8.4cm}| .. flat-table:: :header-rows: 0 @@ -580,7 +580,7 @@ enum v4l2_mpeg_video_bitrate_mode - ``V4L2_CID_MPEG_VIDEO_BITRATE (integer)`` - Video bitrate in bits per second. + Average video bitrate in bits per second. ``V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (integer)`` Peak video bitrate in bits per second. Must be larger or equal to @@ -605,7 +605,7 @@ enum v4l2_mpeg_video_frame_skip_mode - are: -.. tabularcolumns:: |p{9.2cm}|p{8.3cm}| +.. tabularcolumns:: |p{8.2cm}|p{9.3cm}| .. raw:: latex @@ -615,12 +615,12 @@ enum v4l2_mpeg_video_frame_skip_mode - :header-rows: 0 :stub-columns: 0 - * - ``V4L2_MPEG_FRAME_SKIP_MODE_DISABLED`` + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_DISABLED`` - Frame skip mode is disabled. - * - ``V4L2_MPEG_FRAME_SKIP_MODE_LEVEL_LIMIT`` + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT`` - Frame skip mode enabled and buffer limit is set by the chosen level and is defined by the standard. - * - ``V4L2_MPEG_FRAME_SKIP_MODE_BUF_LIMIT`` + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT`` - Frame skip mode enabled and buffer limit is set by the :ref:`VBV (MPEG1/2/4) <v4l2-mpeg-video-vbv-size>` or :ref:`CPB (H264) buffer size <v4l2-mpeg-video-h264-cpb-size>` control. @@ -674,11 +674,64 @@ enum v4l2_mpeg_video_frame_skip_mode - is currently displayed (decoded). This value is reset to 0 whenever the decoder is started. +``V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (integer64)`` + This control sets the conceal color in YUV color space. It describes + the client preference of the error conceal color in case of an error + where the reference frame is missing. The decoder should fill the + reference buffer with the preferred color and use it for future + decoding. The control is using 16 bits per channel. + Applicable to decoders. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - + - 8bit format + - 10bit format + - 12bit format + * - Y luminance + - Bit 0:7 + - Bit 0:9 + - Bit 0:11 + * - Cb chrominance + - Bit 16:23 + - Bit 16:25 + - Bit 16:27 + * - Cr chrominance + - Bit 32:39 + - Bit 32:41 + - Bit 32:43 + * - Must be zero + - Bit 48:63 + - Bit 48:63 + - Bit 48:63 + ``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)`` If enabled the decoder expects to receive a single slice per buffer, otherwise the decoder expects a single frame in per buffer. Applicable to the decoder, all codecs. +``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (boolean)`` + If the display delay is enabled then the decoder is forced to return + a CAPTURE buffer (decoded frame) after processing a certain number + of OUTPUT buffers. The delay can be set through + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY``. This + feature can be used for example for generating thumbnails of videos. + Applicable to the decoder. + +``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (integer)`` + Display delay value for decoder. The decoder is forced to + return a decoded frame after the set 'display delay' number of + frames. If this number is low it may result in frames returned out + of display order, in addition the hardware may still be using the + returned buffer as a reference picture for subsequent frames. + +``V4L2_CID_MPEG_VIDEO_AU_DELIMITER (boolean)`` + If enabled then, AUD (Access Unit Delimiter) NALUs will be generated. + That could be useful to find the start of a frame without having to + fully parse each NALU. Applicable to the H264 and HEVC encoders. + ``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)`` Enable writing sample aspect ratio in the Video Usability Information. Applicable to the H264 encoder. @@ -873,7 +926,11 @@ enum v4l2_mpeg_video_h264_profile - The profile information for H264. Applicable to the H264 encoder. Possible values are: +.. raw:: latex + + \small +.. tabularcolumns:: |p{10.2cm}|p{7.3cm}| .. flat-table:: :header-rows: 0 @@ -916,7 +973,9 @@ enum v4l2_mpeg_video_h264_profile - * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH`` - Constrained High profile +.. raw:: latex + \normalsize .. _v4l2-mpeg-video-mpeg2-profile: @@ -927,7 +986,11 @@ enum v4l2_mpeg_video_mpeg2_profile - The profile information for MPEG2. Applicable to MPEG2 codecs. Possible values are: +.. raw:: latex + \small + +.. tabularcolumns:: |p{10.2cm}|p{7.3cm}| .. flat-table:: :header-rows: 0 @@ -947,6 +1010,9 @@ enum v4l2_mpeg_video_mpeg2_profile - - Multi-view profile (MVP) +.. raw:: latex + + \normalsize .. _v4l2-mpeg-video-mpeg4-profile: @@ -957,7 +1023,11 @@ enum v4l2_mpeg_video_mpeg4_profile - The profile information for MPEG4. Applicable to the MPEG4 encoder. Possible values are: +.. raw:: latex + + \small +.. tabularcolumns:: |p{11.8cm}|p{5.7cm}| .. flat-table:: :header-rows: 0 @@ -972,9 +1042,11 @@ enum v4l2_mpeg_video_mpeg4_profile - * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE`` - Simple Scalable profile * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY`` - - + - Advanced Coding Efficiency profile +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (integer)`` The maximum number of reference pictures used for encoding. @@ -1030,7 +1102,7 @@ enum v4l2_mpeg_video_h264_loop_filter_mode - \small -.. tabularcolumns:: |p{13.6cm}|p{3.9cm}| +.. tabularcolumns:: |p{13.5cm}|p{4.0cm}| .. flat-table:: :header-rows: 0 @@ -1425,7 +1497,7 @@ enum v4l2_mpeg_video_h264_fmo_change_dir - Specifies a direction of the slice group change for raster and wipe maps. Applicable to the H264 encoder. Possible values are: - +.. tabularcolumns:: |p{9.6cm}|p{7.9cm}| .. flat-table:: :header-rows: 0 @@ -1549,9 +1621,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - .. c:type:: v4l2_ctrl_mpeg2_slice_params -.. cssclass:: longtable +.. tabularcolumns:: |p{5.6cm}|p{4.6cm}|p{7.1cm}| -.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| +.. cssclass:: longtable .. flat-table:: struct v4l2_ctrl_mpeg2_slice_params :header-rows: 0 @@ -1594,7 +1666,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - .. cssclass:: longtable -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| +.. tabularcolumns:: |p{1.4cm}|p{6.5cm}|p{9.4cm}| .. flat-table:: struct v4l2_mpeg2_sequence :header-rows: 0 @@ -1625,9 +1697,13 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - .. c:type:: v4l2_mpeg2_picture +.. raw:: latex + + \small + .. cssclass:: longtable -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| +.. tabularcolumns:: |p{1.0cm}|p{5.6cm}|p{10.7cm}| .. flat-table:: struct v4l2_mpeg2_picture :header-rows: 0 @@ -1675,6 +1751,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - - ``progressive_frame`` - Indicates whether the current frame is progressive. +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (struct)`` Specifies quantization matrices (as extracted from the bitstream) for the associated MPEG-2 slice data. @@ -1686,9 +1766,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - .. c:type:: v4l2_ctrl_mpeg2_quantization -.. cssclass:: longtable +.. tabularcolumns:: |p{0.8cm}|p{8.0cm}|p{8.5cm}| -.. tabularcolumns:: |p{1.2cm}|p{8.0cm}|p{7.4cm}| +.. cssclass:: longtable .. raw:: latex @@ -1739,6 +1819,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - non-intra-coded frames, in zigzag scanning order. Only relevant for non-4:2:0 YUV formats. +.. raw:: latex + + \normalsize + ``V4L2_CID_FWHT_I_FRAME_QP (integer)`` Quantization parameter for an I frame for FWHT. Valid range: from 1 to 31. @@ -1747,329 +1831,6 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Quantization parameter for a P frame for FWHT. Valid range: from 1 to 31. -.. _v4l2-mpeg-vp8: - -``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (struct)`` - Specifies the frame parameters for the associated VP8 parsed frame data. - This includes the necessary parameters for - configuring a stateless hardware decoding pipeline for VP8. - The bitstream parameters are defined according to :ref:`vp8`. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_vp8_frame_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| - -.. flat-table:: struct v4l2_ctrl_vp8_frame_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - struct :c:type:`v4l2_vp8_segment_header` - - ``segment_header`` - - Structure with segment-based adjustments metadata. - * - struct :c:type:`v4l2_vp8_loopfilter_header` - - ``loopfilter_header`` - - Structure with loop filter level adjustments metadata. - * - struct :c:type:`v4l2_vp8_quantization_header` - - ``quant_header`` - - Structure with VP8 dequantization indices metadata. - * - struct :c:type:`v4l2_vp8_entropy_header` - - ``entropy_header`` - - Structure with VP8 entropy coder probabilities metadata. - * - struct :c:type:`v4l2_vp8_entropy_coder_state` - - ``coder_state`` - - Structure with VP8 entropy coder state. - * - __u16 - - ``width`` - - The width of the frame. Must be set for all frames. - * - __u16 - - ``height`` - - The height of the frame. Must be set for all frames. - * - __u8 - - ``horizontal_scale`` - - Horizontal scaling factor. - * - __u8 - - ``vertical_scaling factor`` - - Vertical scale. - * - __u8 - - ``version`` - - Bitstream version. - * - __u8 - - ``prob_skip_false`` - - Indicates the probability that the macroblock is not skipped. - * - __u8 - - ``prob_intra`` - - Indicates the probability that a macroblock is intra-predicted. - * - __u8 - - ``prob_last`` - - Indicates the probability that the last reference frame is used - for inter-prediction - * - __u8 - - ``prob_gf`` - - Indicates the probability that the golden reference frame is used - for inter-prediction - * - __u8 - - ``num_dct_parts`` - - Number of DCT coefficients partitions. Must be one of: 1, 2, 4, or 8. - * - __u32 - - ``first_part_size`` - - Size of the first partition, i.e. the control partition. - * - __u32 - - ``first_part_header_bits`` - - Size in bits of the first partition header portion. - * - __u32 - - ``dct_part_sizes[8]`` - - DCT coefficients sizes. - * - __u64 - - ``last_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as last reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``golden_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as last reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``alt_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as alternate reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``flags`` - - See :ref:`Frame Header Flags <vp8_frame_header_flags>` - -.. _vp8_frame_header_flags: - -``Frame Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME`` - - 0x01 - - Indicates if the frame is a key frame. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL`` - - 0x02 - - Experimental bitstream. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME`` - - 0x04 - - Show frame flag, indicates if the frame is for display. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF`` - - 0x08 - - Enable/disable skipping of macroblocks with no non-zero coefficients. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN`` - - 0x10 - - Sign of motion vectors when the golden frame is referenced. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT`` - - 0x20 - - Sign of motion vectors when the alt frame is referenced. - -.. c:type:: v4l2_vp8_entropy_coder_state - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_entropy_coder_state - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``range`` - - - * - __u8 - - ``value`` - - - * - __u8 - - ``bit_count`` - - - * - __u8 - - ``padding`` - - Applications and drivers must set this to zero. - -.. c:type:: v4l2_vp8_segment_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_segment_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s8 - - ``quant_update[4]`` - - Signed quantizer value update. - * - __s8 - - ``lf_update[4]`` - - Signed loop filter level value update. - * - __u8 - - ``segment_probs[3]`` - - Segment probabilities. - * - __u8 - - ``padding`` - - Applications and drivers must set this to zero. - * - __u32 - - ``flags`` - - See :ref:`Segment Header Flags <vp8_segment_header_flags>` - -.. _vp8_segment_header_flags: - -``Segment Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED`` - - 0x01 - - Enable/disable segment-based adjustments. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP`` - - 0x02 - - Indicates if the macroblock segmentation map is updated in this frame. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA`` - - 0x04 - - Indicates if the segment feature data is updated in this frame. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE`` - - 0x08 - - If is set, the segment feature data mode is delta-value. - If cleared, it's absolute-value. - -.. c:type:: v4l2_vp8_loopfilter_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_loopfilter_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s8 - - ``ref_frm_delta[4]`` - - Reference adjustment (signed) delta value. - * - __s8 - - ``mb_mode_delta[4]`` - - Macroblock prediction mode adjustment (signed) delta value. - * - __u8 - - ``sharpness_level`` - - Sharpness level - * - __u8 - - ``level`` - - Filter level - * - __u16 - - ``padding`` - - Applications and drivers must set this to zero. - * - __u32 - - ``flags`` - - See :ref:`Loopfilter Header Flags <vp8_loopfilter_header_flags>` - -.. _vp8_loopfilter_header_flags: - -``Loopfilter Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_LF_HEADER_ADJ_ENABLE`` - - 0x01 - - Enable/disable macroblock-level loop filter adjustment. - * - ``V4L2_VP8_LF_HEADER_DELTA_UPDATE`` - - 0x02 - - Indicates if the delta values used in an adjustment are updated. - * - ``V4L2_VP8_LF_FILTER_TYPE_SIMPLE`` - - 0x04 - - If set, indicates the filter type is simple. - If cleared, the filter type is normal. - -.. c:type:: v4l2_vp8_quantization_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_quantization_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``y_ac_qi`` - - Luma AC coefficient table index. - * - __s8 - - ``y_dc_delta`` - - Luma DC delta vaue. - * - __s8 - - ``y2_dc_delta`` - - Y2 block DC delta value. - * - __s8 - - ``y2_ac_delta`` - - Y2 block AC delta value. - * - __s8 - - ``uv_dc_delta`` - - Chroma DC delta value. - * - __s8 - - ``uv_ac_delta`` - - Chroma AC delta value. - * - __u16 - - ``padding`` - - Applications and drivers must set this to zero. - -.. c:type:: v4l2_vp8_entropy_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_entropy_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``coeff_probs[4][8][3][11]`` - - Coefficient update probabilities. - * - __u8 - - ``y_mode_probs[4]`` - - Luma mode update probabilities. - * - __u8 - - ``uv_mode_probs[3]`` - - Chroma mode update probabilities. - * - __u8 - - ``mv_probs[2][19]`` - - MV decoding update probabilities. - * - __u8 - - ``padding[3]`` - - Applications and drivers must set this to zero. - .. raw:: latex \normalsize @@ -2096,6 +1857,11 @@ MFC 5.1 Control IDs feature can be used for example for generating thumbnails of videos. Applicable to the H264 decoder. + .. note:: + + This control is deprecated. Use the standard + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE`` control instead. + ``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (integer)`` Display delay value for H264 decoder. The decoder is forced to return a decoded frame after the set 'display delay' number of @@ -2103,6 +1869,11 @@ MFC 5.1 Control IDs of display order, in addition the hardware may still be using the returned buffer as a reference picture for subsequent frames. + .. note:: + + This control is deprecated. Use the standard + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY`` control instead. + ``V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (integer)`` The number of reference pictures used for encoding a P picture. Applicable to the H264 encoder. @@ -2187,7 +1958,7 @@ enum v4l2_mpeg_mfc51_video_frame_skip_mode - are: -.. tabularcolumns:: |p{9.2cm}|p{8.3cm}| +.. tabularcolumns:: |p{9.4cm}|p{8.1cm}| .. raw:: latex @@ -2197,12 +1968,12 @@ enum v4l2_mpeg_mfc51_video_frame_skip_mode - :header-rows: 0 :stub-columns: 0 - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED`` - Frame skip mode is disabled. - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT`` - Frame skip mode enabled and buffer limit is set by the chosen level and is defined by the standard. - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT`` - Frame skip mode enabled and buffer limit is set by the VBV (MPEG1/2/4) or CPB (H264) buffer size control. @@ -2231,7 +2002,7 @@ enum v4l2_mpeg_mfc51_video_force_frame_type - Force a frame type for the next queued buffer. Applicable to encoders. Possible values are: -.. tabularcolumns:: |p{9.5cm}|p{8.0cm}| +.. tabularcolumns:: |p{9.9cm}|p{7.6cm}| .. flat-table:: :header-rows: 0 @@ -2267,6 +2038,7 @@ enum v4l2_mpeg_cx2341x_video_spatial_filter_mode - are: +.. tabularcolumns:: |p{11.5cm}|p{6.0cm}| .. flat-table:: :header-rows: 0 @@ -2292,11 +2064,11 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type - Select the algorithm to use for the Luma Spatial Filter (default ``1D_HOR``). Possible values: -.. tabularcolumns:: |p{14.5cm}|p{3.0cm}| +.. tabularcolumns:: |p{13.1cm}|p{4.4cm}| .. raw:: latex - \small + \footnotesize .. flat-table:: :header-rows: 0 @@ -2317,8 +2089,6 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type - \normalsize - - .. _chroma-spatial-filter-type: ``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE`` @@ -2328,8 +2098,11 @@ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type - Select the algorithm for the Chroma Spatial Filter (default ``1D_HOR``). Possible values are: +.. raw:: latex -.. tabularcolumns:: |p{14.0cm}|p{3.5cm}| + \footnotesize + +.. tabularcolumns:: |p{11.0cm}|p{6.5cm}| .. flat-table:: :header-rows: 0 @@ -2340,7 +2113,9 @@ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type - * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR`` - One-dimensional horizontal +.. raw:: latex + \normalsize .. _v4l2-mpeg-cx2341x-video-temporal-filter-mode: @@ -2351,7 +2126,9 @@ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode - Sets the Temporal Filter mode (default ``MANUAL``). Possible values are: +.. raw:: latex + \footnotesize .. flat-table:: :header-rows: 0 @@ -2362,7 +2139,9 @@ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode - * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO`` - Choose the filter automatically +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (integer (0-31))`` The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default @@ -2377,6 +2156,11 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type - Median Filter Type (default ``OFF``). Possible values are: +.. raw:: latex + + \small + +.. tabularcolumns:: |p{11.0cm}|p{6.5cm}| .. flat-table:: :header-rows: 0 @@ -2393,7 +2177,9 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type - * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG`` - Diagonal filter +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (integer (0-255))`` Threshold above which the luminance median filter is enabled @@ -2470,7 +2256,7 @@ enum v4l2_vp8_num_ref_frames - The number of reference pictures for encoding P frames. Possible values are: -.. tabularcolumns:: |p{7.9cm}|p{9.6cm}| +.. tabularcolumns:: |p{7.5cm}|p{7.5cm}| .. raw:: latex @@ -2525,7 +2311,7 @@ enum v4l2_vp8_golden_frame_sel - \scriptsize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{8.6cm}|p{8.9cm}| .. flat-table:: :header-rows: 0 @@ -2735,7 +2521,7 @@ enum v4l2_mpeg_video_hevc_hier_coding_type - \footnotesize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{8.2cm}|p{9.3cm}| .. flat-table:: :header-rows: 0 @@ -2804,7 +2590,7 @@ enum v4l2_mpeg_video_hevc_profile - \footnotesize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{9.0cm}|p{8.5cm}| .. flat-table:: :header-rows: 0 @@ -2830,47 +2616,21 @@ enum v4l2_mpeg_video_hevc_profile - enum v4l2_mpeg_video_hevc_level - Selects the desired level for HEVC encoder. -.. raw:: latex - - \footnotesize - -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1`` - - Level 1.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2`` - - Level 2.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1`` - - Level 2.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3`` - - Level 3.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1`` - - Level 3.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4`` - - Level 4.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1`` - - Level 4.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5`` - - Level 5.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1`` - - Level 5.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2`` - - Level 5.2 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6`` - - Level 6.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1`` - - Level 6.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2`` - - Level 6.2 - -.. raw:: latex - - \normalsize - +================================== ========= +``V4L2_MPEG_VIDEO_HEVC_LEVEL_1`` Level 1.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_2`` Level 2.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1`` Level 2.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_3`` Level 3.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1`` Level 3.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_4`` Level 4.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1`` Level 4.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5`` Level 5.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1`` Level 5.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2`` Level 5.2 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6`` Level 6.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1`` Level 6.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2`` Level 6.2 +================================== ========= ``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)`` Indicates the number of evenly spaced subintervals, called ticks, within @@ -2889,24 +2649,10 @@ enum v4l2_mpeg_video_hevc_tier - this flag to 1 indicates High tier. High tier is for applications requiring high bit rates. -.. raw:: latex - - \footnotesize - -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN`` - - Main tier. - * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH`` - - High tier. - -.. raw:: latex - - \normalsize +================================== ========== +``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN`` Main tier. +``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH`` High tier. +================================== ========== ``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)`` @@ -2962,7 +2708,7 @@ enum v4l2_mpeg_video_hevc_hier_refresh_type - \footnotesize -.. tabularcolumns:: |p{8.0cm}|p{9.0cm}| +.. tabularcolumns:: |p{6.2cm}|p{11.3cm}| .. flat-table:: :header-rows: 0 @@ -3042,7 +2788,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - \footnotesize -.. tabularcolumns:: |p{6.0cm}|p{11.0cm}| +.. tabularcolumns:: |p{5.5cm}|p{12.0cm}| .. flat-table:: :header-rows: 0 @@ -3102,6 +2848,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_ctrl_hevc_sps +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}| + .. cssclass:: longtable .. flat-table:: struct v4l2_ctrl_hevc_sps @@ -3176,10 +2928,18 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - ``flags`` - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>` +.. raw:: latex + + \normalsize + .. _hevc_sps_flags: ``Sequence Parameter Set Flags`` +.. raw:: latex + + \small + .. cssclass:: longtable .. flat-table:: @@ -3215,6 +2975,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - 0x00000100 - +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)`` Specifies the Picture Parameter Set fields (as extracted from the bitstream) for the associated HEVC slice data. @@ -3224,6 +2988,8 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_ctrl_hevc_pps +.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}| + .. cssclass:: longtable .. flat-table:: struct v4l2_ctrl_hevc_pps @@ -3278,7 +3044,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - ``Picture Parameter Set Flags`` -.. cssclass:: longtable +.. raw:: latex + + \small .. flat-table:: :header-rows: 0 @@ -3343,6 +3111,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - 0x00040000 - +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)`` Specifies various slice-specific parameters, especially from the NAL unit header, general slice segment header and weighted prediction parameter @@ -3353,6 +3125,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_ctrl_hevc_slice_params +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| + .. cssclass:: longtable .. flat-table:: struct v4l2_ctrl_hevc_slice_params @@ -3455,11 +3233,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - ``flags`` - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>` +.. raw:: latex + + \normalsize + .. _hevc_slice_params_flags: ``Slice Parameters Flags`` -.. cssclass:: longtable +.. raw:: latex + + \scriptsize .. flat-table:: :header-rows: 0 @@ -3494,9 +3278,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - 0x00000100 - +.. raw:: latex + + \normalsize + .. c:type:: v4l2_hevc_dpb_entry -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}| .. flat-table:: struct v4l2_hevc_dpb_entry :header-rows: 0 @@ -3528,9 +3320,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - ``padding[2]`` - Applications and drivers must set this to zero. +.. raw:: latex + + \normalsize + .. c:type:: v4l2_hevc_pred_weight_table -.. cssclass:: longtable +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}| .. flat-table:: struct v4l2_hevc_pred_weight_table :header-rows: 0 @@ -3571,6 +3371,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - ``padding[6]`` - Applications and drivers must set this to zero. +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)`` Specifies the decoding mode to use. Currently exposes slice-based and frame-based decoding but new modes might be added later on. @@ -3588,7 +3392,11 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_mpeg_video_hevc_decode_mode -.. cssclass:: longtable +.. raw:: latex + + \small + +.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}| .. flat-table:: :header-rows: 0 @@ -3605,6 +3413,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - The OUTPUT buffer must contain all slices needed to decode the frame. The OUTPUT buffer must also contain both fields. +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)`` Specifies the HEVC slice start code expected for each slice. This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE @@ -3621,7 +3433,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - .. c:type:: v4l2_mpeg_video_hevc_start_code -.. cssclass:: longtable +.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}| .. flat-table:: :header-rows: 0 @@ -3631,7 +3443,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE`` - 0 - Selecting this value specifies that HEVC slices are passed - to the driver without any start code. + to the driver without any start code. The bitstream data should be + according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence + contains emulation prevention bytes when required. * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B`` - 1 - Selecting this value specifies that HEVC slices are expected @@ -3646,3 +3460,21 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - so this has to come from client. This is applicable to H264 and valid Range is from 0 to 63. Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1. + +``V4L2_CID_MPEG_VIDEO_LTR_COUNT (integer)`` + Specifies the maximum number of Long Term Reference (LTR) frames at any + given time that the encoder can keep. + This is applicable to the H264 and HEVC encoders. + +``V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (integer)`` + After setting this control the frame that will be queued next + will be marked as a Long Term Reference (LTR) frame + and given this LTR index which ranges from 0 to LTR_COUNT-1. + This is applicable to the H264 and HEVC encoders. + Source Rec. ITU-T H.264 (06/2019); Table 7.9 + +``V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (bitmask)`` + Specifies the Long Term Reference (LTR) frame(s) to be used for + encoding the next frame queued after setting this control. + This provides a bitmask which consists of bits [0, LTR_COUNT-1]. + This is applicable to the H264 and HEVC encoders. |