diff options
Diffstat (limited to 'Documentation/x86/cpuinfo.rst')
-rw-r--r-- | Documentation/x86/cpuinfo.rst | 154 |
1 files changed, 0 insertions, 154 deletions
diff --git a/Documentation/x86/cpuinfo.rst b/Documentation/x86/cpuinfo.rst deleted file mode 100644 index 08246e8ac835..000000000000 --- a/Documentation/x86/cpuinfo.rst +++ /dev/null @@ -1,154 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -================= -x86 Feature Flags -================= - -Introduction -============ - -On x86, flags appearing in /proc/cpuinfo have an X86_FEATURE definition -in arch/x86/include/asm/cpufeatures.h. If the kernel cares about a feature -or KVM want to expose the feature to a KVM guest, it can and should have -an X86_FEATURE_* defined. These flags represent hardware features as -well as software features. - -If users want to know if a feature is available on a given system, they -try to find the flag in /proc/cpuinfo. If a given flag is present, it -means that the kernel supports it and is currently making it available. -If such flag represents a hardware feature, it also means that the -hardware supports it. - -If the expected flag does not appear in /proc/cpuinfo, things are murkier. -Users need to find out the reason why the flag is missing and find the way -how to enable it, which is not always easy. There are several factors that -can explain missing flags: the expected feature failed to enable, the feature -is missing in hardware, platform firmware did not enable it, the feature is -disabled at build or run time, an old kernel is in use, or the kernel does -not support the feature and thus has not enabled it. In general, /proc/cpuinfo -shows features which the kernel supports. For a full list of CPUID flags -which the CPU supports, use tools/arch/x86/kcpuid. - -How are feature flags created? -============================== - -a: Feature flags can be derived from the contents of CPUID leaves. ------------------------------------------------------------------- -These feature definitions are organized mirroring the layout of CPUID -leaves and grouped in words with offsets as mapped in enum cpuid_leafs -in cpufeatures.h (see arch/x86/include/asm/cpufeatures.h for details). -If a feature is defined with a X86_FEATURE_<name> definition in -cpufeatures.h, and if it is detected at run time, the flags will be -displayed accordingly in /proc/cpuinfo. For example, the flag "avx2" -comes from X86_FEATURE_AVX2 in cpufeatures.h. - -b: Flags can be from scattered CPUID-based features. ----------------------------------------------------- -Hardware features enumerated in sparsely populated CPUID leaves get -software-defined values. Still, CPUID needs to be queried to determine -if a given feature is present. This is done in init_scattered_cpuid_features(). -For instance, X86_FEATURE_CQM_LLC is defined as 11*32 + 0 and its presence is -checked at runtime in the respective CPUID leaf [EAX=f, ECX=0] bit EDX[1]. - -The intent of scattering CPUID leaves is to not bloat struct -cpuinfo_x86.x86_capability[] unnecessarily. For instance, the CPUID leaf -[EAX=7, ECX=0] has 30 features and is dense, but the CPUID leaf [EAX=7, EAX=1] -has only one feature and would waste 31 bits of space in the x86_capability[] -array. Since there is a struct cpuinfo_x86 for each possible CPU, the wasted -memory is not trivial. - -c: Flags can be created synthetically under certain conditions for hardware features. -------------------------------------------------------------------------------------- -Examples of conditions include whether certain features are present in -MSR_IA32_CORE_CAPS or specific CPU models are identified. If the needed -conditions are met, the features are enabled by the set_cpu_cap or -setup_force_cpu_cap macros. For example, if bit 5 is set in MSR_IA32_CORE_CAPS, -the feature X86_FEATURE_SPLIT_LOCK_DETECT will be enabled and -"split_lock_detect" will be displayed. The flag "ring3mwait" will be -displayed only when running on INTEL_FAM6_XEON_PHI_[KNL|KNM] processors. - -d: Flags can represent purely software features. ------------------------------------------------- -These flags do not represent hardware features. Instead, they represent a -software feature implemented in the kernel. For example, Kernel Page Table -Isolation is purely software feature and its feature flag X86_FEATURE_PTI is -also defined in cpufeatures.h. - -Naming of Flags -=============== - -The script arch/x86/kernel/cpu/mkcapflags.sh processes the -#define X86_FEATURE_<name> from cpufeatures.h and generates the -x86_cap/bug_flags[] arrays in kernel/cpu/capflags.c. The names in the -resulting x86_cap/bug_flags[] are used to populate /proc/cpuinfo. The naming -of flags in the x86_cap/bug_flags[] are as follows: - -a: The name of the flag is from the string in X86_FEATURE_<name> by default. ----------------------------------------------------------------------------- -By default, the flag <name> in /proc/cpuinfo is extracted from the respective -X86_FEATURE_<name> in cpufeatures.h. For example, the flag "avx2" is from -X86_FEATURE_AVX2. - -b: The naming can be overridden. --------------------------------- -If the comment on the line for the #define X86_FEATURE_* starts with a -double-quote character (""), the string inside the double-quote characters -will be the name of the flags. For example, the flag "sse4_1" comes from -the comment "sse4_1" following the X86_FEATURE_XMM4_1 definition. - -There are situations in which overriding the displayed name of the flag is -needed. For instance, /proc/cpuinfo is a userspace interface and must remain -constant. If, for some reason, the naming of X86_FEATURE_<name> changes, one -shall override the new naming with the name already used in /proc/cpuinfo. - -c: The naming override can be "", which means it will not appear in /proc/cpuinfo. ----------------------------------------------------------------------------------- -The feature shall be omitted from /proc/cpuinfo if it does not make sense for -the feature to be exposed to userspace. For example, X86_FEATURE_ALWAYS is -defined in cpufeatures.h but that flag is an internal kernel feature used -in the alternative runtime patching functionality. So, its name is overridden -with "". Its flag will not appear in /proc/cpuinfo. - -Flags are missing when one or more of these happen -================================================== - -a: The hardware does not enumerate support for it. --------------------------------------------------- -For example, when a new kernel is running on old hardware or the feature is -not enabled by boot firmware. Even if the hardware is new, there might be a -problem enabling the feature at run time, the flag will not be displayed. - -b: The kernel does not know about the flag. -------------------------------------------- -For example, when an old kernel is running on new hardware. - -c: The kernel disabled support for it at compile-time. ------------------------------------------------------- -For example, if 5-level-paging is not enabled when building (i.e., -CONFIG_X86_5LEVEL is not selected) the flag "la57" will not show up [#f1]_. -Even though the feature will still be detected via CPUID, the kernel disables -it by clearing via setup_clear_cpu_cap(X86_FEATURE_LA57). - -d: The feature is disabled at boot-time. ----------------------------------------- -A feature can be disabled either using a command-line parameter or because -it failed to be enabled. The command-line parameter clearcpuid= can be used -to disable features using the feature number as defined in -/arch/x86/include/asm/cpufeatures.h. For instance, User Mode Instruction -Protection can be disabled using clearcpuid=514. The number 514 is calculated -from #define X86_FEATURE_UMIP (16*32 + 2). - -In addition, there exists a variety of custom command-line parameters that -disable specific features. The list of parameters includes, but is not limited -to, nofsgsbase, nosgx, noxsave, etc. 5-level paging can also be disabled using -"no5lvl". - -e: The feature was known to be non-functional. ----------------------------------------------- -The feature was known to be non-functional because a dependency was -missing at runtime. For example, AVX flags will not show up if XSAVE feature -is disabled since they depend on XSAVE feature. Another example would be broken -CPUs and them missing microcode patches. Due to that, the kernel decides not to -enable a feature. - -.. [#f1] 5-level paging uses linear address of 57 bits. |