summaryrefslogtreecommitdiff
path: root/Documentation/x86
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/x86')
-rw-r--r--Documentation/x86/intel_mpx.rst252
1 files changed, 0 insertions, 252 deletions
diff --git a/Documentation/x86/intel_mpx.rst b/Documentation/x86/intel_mpx.rst
deleted file mode 100644
index 387a640941a6..000000000000
--- a/Documentation/x86/intel_mpx.rst
+++ /dev/null
@@ -1,252 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-===========================================
-Intel(R) Memory Protection Extensions (MPX)
-===========================================
-
-Intel(R) MPX Overview
-=====================
-
-Intel(R) Memory Protection Extensions (Intel(R) MPX) is a new capability
-introduced into Intel Architecture. Intel MPX provides hardware features
-that can be used in conjunction with compiler changes to check memory
-references, for those references whose compile-time normal intentions are
-usurped at runtime due to buffer overflow or underflow.
-
-You can tell if your CPU supports MPX by looking in /proc/cpuinfo::
-
- cat /proc/cpuinfo | grep ' mpx '
-
-For more information, please refer to Intel(R) Architecture Instruction
-Set Extensions Programming Reference, Chapter 9: Intel(R) Memory Protection
-Extensions.
-
-Note: As of December 2014, no hardware with MPX is available but it is
-possible to use SDE (Intel(R) Software Development Emulator) instead, which
-can be downloaded from
-http://software.intel.com/en-us/articles/intel-software-development-emulator
-
-
-How to get the advantage of MPX
-===============================
-
-For MPX to work, changes are required in the kernel, binutils and compiler.
-No source changes are required for applications, just a recompile.
-
-There are a lot of moving parts of this to all work right. The following
-is how we expect the compiler, application and kernel to work together.
-
-1) Application developer compiles with -fmpx. The compiler will add the
- instrumentation as well as some setup code called early after the app
- starts. New instruction prefixes are noops for old CPUs.
-2) That setup code allocates (virtual) space for the "bounds directory",
- points the "bndcfgu" register to the directory (must also set the valid
- bit) and notifies the kernel (via the new prctl(PR_MPX_ENABLE_MANAGEMENT))
- that the app will be using MPX. The app must be careful not to access
- the bounds tables between the time when it populates "bndcfgu" and
- when it calls the prctl(). This might be hard to guarantee if the app
- is compiled with MPX. You can add "__attribute__((bnd_legacy))" to
- the function to disable MPX instrumentation to help guarantee this.
- Also be careful not to call out to any other code which might be
- MPX-instrumented.
-3) The kernel detects that the CPU has MPX, allows the new prctl() to
- succeed, and notes the location of the bounds directory. Userspace is
- expected to keep the bounds directory at that location. We note it
- instead of reading it each time because the 'xsave' operation needed
- to access the bounds directory register is an expensive operation.
-4) If the application needs to spill bounds out of the 4 registers, it
- issues a bndstx instruction. Since the bounds directory is empty at
- this point, a bounds fault (#BR) is raised, the kernel allocates a
- bounds table (in the user address space) and makes the relevant entry
- in the bounds directory point to the new table.
-5) If the application violates the bounds specified in the bounds registers,
- a separate kind of #BR is raised which will deliver a signal with
- information about the violation in the 'struct siginfo'.
-6) Whenever memory is freed, we know that it can no longer contain valid
- pointers, and we attempt to free the associated space in the bounds
- tables. If an entire table becomes unused, we will attempt to free
- the table and remove the entry in the directory.
-
-To summarize, there are essentially three things interacting here:
-
-GCC with -fmpx:
- * enables annotation of code with MPX instructions and prefixes
- * inserts code early in the application to call in to the "gcc runtime"
-GCC MPX Runtime:
- * Checks for hardware MPX support in cpuid leaf
- * allocates virtual space for the bounds directory (malloc() essentially)
- * points the hardware BNDCFGU register at the directory
- * calls a new prctl(PR_MPX_ENABLE_MANAGEMENT) to notify the kernel to
- start managing the bounds directories
-Kernel MPX Code:
- * Checks for hardware MPX support in cpuid leaf
- * Handles #BR exceptions and sends SIGSEGV to the app when it violates
- bounds, like during a buffer overflow.
- * When bounds are spilled in to an unallocated bounds table, the kernel
- notices in the #BR exception, allocates the virtual space, then
- updates the bounds directory to point to the new table. It keeps
- special track of the memory with a VM_MPX flag.
- * Frees unused bounds tables at the time that the memory they described
- is unmapped.
-
-
-How does MPX kernel code work
-=============================
-
-Handling #BR faults caused by MPX
----------------------------------
-
-When MPX is enabled, there are 2 new situations that can generate
-#BR faults.
-
- * new bounds tables (BT) need to be allocated to save bounds.
- * bounds violation caused by MPX instructions.
-
-We hook #BR handler to handle these two new situations.
-
-On-demand kernel allocation of bounds tables
---------------------------------------------
-
-MPX only has 4 hardware registers for storing bounds information. If
-MPX-enabled code needs more than these 4 registers, it needs to spill
-them somewhere. It has two special instructions for this which allow
-the bounds to be moved between the bounds registers and some new "bounds
-tables".
-
-#BR exceptions are a new class of exceptions just for MPX. They are
-similar conceptually to a page fault and will be raised by the MPX
-hardware during both bounds violations or when the tables are not
-present. The kernel handles those #BR exceptions for not-present tables
-by carving the space out of the normal processes address space and then
-pointing the bounds-directory over to it.
-
-The tables need to be accessed and controlled by userspace because
-the instructions for moving bounds in and out of them are extremely
-frequent. They potentially happen every time a register points to
-memory. Any direct kernel involvement (like a syscall) to access the
-tables would obviously destroy performance.
-
-Why not do this in userspace? MPX does not strictly require anything in
-the kernel. It can theoretically be done completely from userspace. Here
-are a few ways this could be done. We don't think any of them are practical
-in the real-world, but here they are.
-
-:Q: Can virtual space simply be reserved for the bounds tables so that we
- never have to allocate them?
-:A: MPX-enabled application will possibly create a lot of bounds tables in
- process address space to save bounds information. These tables can take
- up huge swaths of memory (as much as 80% of the memory on the system)
- even if we clean them up aggressively. In the worst-case scenario, the
- tables can be 4x the size of the data structure being tracked. IOW, a
- 1-page structure can require 4 bounds-table pages. An X-GB virtual
- area needs 4*X GB of virtual space, plus 2GB for the bounds directory.
- If we were to preallocate them for the 128TB of user virtual address
- space, we would need to reserve 512TB+2GB, which is larger than the
- entire virtual address space today. This means they can not be reserved
- ahead of time. Also, a single process's pre-populated bounds directory
- consumes 2GB of virtual *AND* physical memory. IOW, it's completely
- infeasible to prepopulate bounds directories.
-
-:Q: Can we preallocate bounds table space at the same time memory is
- allocated which might contain pointers that might eventually need
- bounds tables?
-:A: This would work if we could hook the site of each and every memory
- allocation syscall. This can be done for small, constrained applications.
- But, it isn't practical at a larger scale since a given app has no
- way of controlling how all the parts of the app might allocate memory
- (think libraries). The kernel is really the only place to intercept
- these calls.
-
-:Q: Could a bounds fault be handed to userspace and the tables allocated
- there in a signal handler instead of in the kernel?
-:A: mmap() is not on the list of safe async handler functions and even
- if mmap() would work it still requires locking or nasty tricks to
- keep track of the allocation state there.
-
-Having ruled out all of the userspace-only approaches for managing
-bounds tables that we could think of, we create them on demand in
-the kernel.
-
-Decoding MPX instructions
--------------------------
-
-If a #BR is generated due to a bounds violation caused by MPX.
-We need to decode MPX instructions to get violation address and
-set this address into extended struct siginfo.
-
-The _sigfault field of struct siginfo is extended as follow::
-
- 87 /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
- 88 struct {
- 89 void __user *_addr; /* faulting insn/memory ref. */
- 90 #ifdef __ARCH_SI_TRAPNO
- 91 int _trapno; /* TRAP # which caused the signal */
- 92 #endif
- 93 short _addr_lsb; /* LSB of the reported address */
- 94 struct {
- 95 void __user *_lower;
- 96 void __user *_upper;
- 97 } _addr_bnd;
- 98 } _sigfault;
-
-The '_addr' field refers to violation address, and new '_addr_and'
-field refers to the upper/lower bounds when a #BR is caused.
-
-Glibc will be also updated to support this new siginfo. So user
-can get violation address and bounds when bounds violations occur.
-
-Cleanup unused bounds tables
-----------------------------
-
-When a BNDSTX instruction attempts to save bounds to a bounds directory
-entry marked as invalid, a #BR is generated. This is an indication that
-no bounds table exists for this entry. In this case the fault handler
-will allocate a new bounds table on demand.
-
-Since the kernel allocated those tables on-demand without userspace
-knowledge, it is also responsible for freeing them when the associated
-mappings go away.
-
-Here, the solution for this issue is to hook do_munmap() to check
-whether one process is MPX enabled. If yes, those bounds tables covered
-in the virtual address region which is being unmapped will be freed also.
-
-Adding new prctl commands
--------------------------
-
-Two new prctl commands are added to enable and disable MPX bounds tables
-management in kernel.
-::
-
- 155 #define PR_MPX_ENABLE_MANAGEMENT 43
- 156 #define PR_MPX_DISABLE_MANAGEMENT 44
-
-Runtime library in userspace is responsible for allocation of bounds
-directory. So kernel have to use XSAVE instruction to get the base
-of bounds directory from BNDCFG register.
-
-But XSAVE is expected to be very expensive. In order to do performance
-optimization, we have to get the base of bounds directory and save it
-into struct mm_struct to be used in future during PR_MPX_ENABLE_MANAGEMENT
-command execution.
-
-
-Special rules
-=============
-
-1) If userspace is requesting help from the kernel to do the management
-of bounds tables, it may not create or modify entries in the bounds directory.
-
-Certainly users can allocate bounds tables and forcibly point the bounds
-directory at them through XSAVE instruction, and then set valid bit
-of bounds entry to have this entry valid. But, the kernel will decline
-to assist in managing these tables.
-
-2) Userspace may not take multiple bounds directory entries and point
-them at the same bounds table.
-
-This is allowed architecturally. See more information "Intel(R) Architecture
-Instruction Set Extensions Programming Reference" (9.3.4).
-
-However, if users did this, the kernel might be fooled in to unmapping an
-in-use bounds table since it does not recognize sharing.