summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/stable/sysfs-bus-vmbus29
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-loopback2
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-sourcesink2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio18
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs9
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb14
-rw-r--r--Documentation/ABI/testing/sysfs-class-cxl10
-rw-r--r--Documentation/ABI/testing/sysfs-class-power-twl403045
-rw-r--r--Documentation/ABI/testing/sysfs-driver-sunxi-sid22
-rw-r--r--Documentation/ABI/testing/sysfs-driver-wacom19
-rw-r--r--Documentation/ABI/testing/sysfs-gpio3
-rw-r--r--Documentation/CodingStyle2
-rw-r--r--Documentation/DocBook/Makefile55
-rw-r--r--Documentation/DocBook/alsa-driver-api.tmpl2
-rw-r--r--Documentation/DocBook/crypto-API.tmpl8
-rw-r--r--Documentation/DocBook/device-drivers.tmpl1
-rw-r--r--Documentation/DocBook/drm.tmpl24
-rw-r--r--Documentation/DocBook/filesystems.tmpl178
-rw-r--r--Documentation/DocBook/iio.tmpl697
-rw-r--r--Documentation/DocBook/stylesheet.xsl1
-rw-r--r--Documentation/HOWTO28
-rw-r--r--Documentation/Intel-IOMMU.txt2
-rw-r--r--Documentation/RCU/rcu_dereference.txt2
-rw-r--r--Documentation/RCU/stallwarn.txt29
-rw-r--r--Documentation/RCU/trace.txt36
-rw-r--r--Documentation/RCU/whatisRCU.txt2
-rw-r--r--Documentation/SubmittingPatches14
-rw-r--r--Documentation/acpi/method-tracing.txt204
-rw-r--r--Documentation/adding-syscalls.txt527
-rw-r--r--Documentation/arm/Atmel/README5
-rw-r--r--Documentation/arm/Samsung/Bootloader-interface.txt15
-rw-r--r--Documentation/arm/keystone/Overview.txt73
-rw-r--r--Documentation/arm64/booting.txt11
-rw-r--r--Documentation/atomic_ops.txt4
-rw-r--r--Documentation/block/biodoc.txt2
-rw-r--r--Documentation/block/biovecs.txt10
-rw-r--r--Documentation/block/queue-sysfs.txt10
-rw-r--r--Documentation/cgroups/00-INDEX2
-rw-r--r--Documentation/cgroups/pids.txt85
-rw-r--r--Documentation/cgroups/unified-hierarchy.txt80
-rw-r--r--Documentation/clk.txt8
-rw-r--r--Documentation/cpu-freq/core.txt7
-rw-r--r--Documentation/device-mapper/dm-raid.txt31
-rw-r--r--Documentation/device-mapper/statistics.txt4
-rw-r--r--Documentation/devicetree/bindings/arc/archs-pct.txt17
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.txt17
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/ns2.txt9
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/coresight.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt18
-rw-r--r--Documentation/devicetree/bindings/arm/l2cc.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/marvell,kirkwood.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.txt13
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/pmu.txt12
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.txt35
-rw-r--r--Documentation/devicetree/bindings/arm/sp810.txt46
-rw-r--r--Documentation/devicetree/bindings/clock/gpio-mux-clock.txt19
-rw-r--r--Documentation/devicetree/bindings/clock/hi6220-clock.txt19
-rw-r--r--Documentation/devicetree/bindings/clock/imx6ul-clock.txt13
-rw-r--r--Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt83
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt79
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt29
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt30
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt26
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt29
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt61
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt4
-rw-r--r--Documentation/devicetree/bindings/clock/ux500.txt64
-rw-r--r--Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt44
-rw-r--r--Documentation/devicetree/bindings/crypto/fsl-sec4.txt108
-rw-r--r--Documentation/devicetree/bindings/crypto/sun4i-ss.txt23
-rw-r--r--Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt43
-rw-r--r--Documentation/devicetree/bindings/dma/adi,axi-dmac.txt61
-rw-r--r--Documentation/devicetree/bindings/dma/arm-pl08x.txt54
-rw-r--r--Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt54
-rw-r--r--Documentation/devicetree/bindings/dma/mv-xor.txt10
-rw-r--r--Documentation/devicetree/bindings/dma/sun4i-dma.txt46
-rw-r--r--Documentation/devicetree/bindings/dma/zxdma.txt38
-rw-r--r--Documentation/devicetree/bindings/drm/msm/dsi.txt41
-rw-r--r--Documentation/devicetree/bindings/drm/msm/hdmi.txt3
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-palmas.txt5
-rw-r--r--Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt35
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt3
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt22
-rw-r--r--Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt1
-rw-r--r--Documentation/devicetree/bindings/gpio/zx296702-gpio.txt24
-rw-r--r--Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt8
-rw-r--r--Documentation/devicetree/bindings/gpu/st,stih4xx.txt72
-rw-r--r--Documentation/devicetree/bindings/hwmon/lm70.txt21
-rw-r--r--Documentation/devicetree/bindings/hwmon/ltc2978.txt12
-rw-r--r--Documentation/devicetree/bindings/iio/adc/mcp320x.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/vf610-adc.txt5
-rw-r--r--Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt13
-rw-r--r--Documentation/devicetree/bindings/iio/st-sensors.txt2
-rw-r--r--Documentation/devicetree/bindings/input/ads7846.txt2
-rw-r--r--Documentation/devicetree/bindings/input/cap11xx.txt19
-rw-r--r--Documentation/devicetree/bindings/input/cypress,cyapa.txt44
-rw-r--r--Documentation/devicetree/bindings/input/elants_i2c.txt3
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys-polled.txt2
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys.txt2
-rw-r--r--Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt2
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt2
-rw-r--r--Documentation/devicetree/bindings/input/samsung-keypad.txt4
-rw-r--r--Documentation/devicetree/bindings/input/snvs-pwrkey.txt1
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt3
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt8
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt25
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt37
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/msi.txt135
-rw-r--r--Documentation/devicetree/bindings/leds/common.txt27
-rw-r--r--Documentation/devicetree/bindings/leds/leds-ns2.txt9
-rw-r--r--Documentation/devicetree/bindings/leds/leds-powernv.txt26
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt125
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt3
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/synopsys.txt4
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt4
-rw-r--r--Documentation/devicetree/bindings/mfd/axp20x.txt4
-rw-r--r--Documentation/devicetree/bindings/mfd/da9062.txt88
-rw-r--r--Documentation/devicetree/bindings/mfd/max77686.txt65
-rw-r--r--Documentation/devicetree/bindings/mfd/max77802.txt26
-rw-r--r--Documentation/devicetree/bindings/mfd/rk808.txt8
-rw-r--r--Documentation/devicetree/bindings/mfd/tc3589x.txt4
-rw-r--r--Documentation/devicetree/bindings/mtd/fsl-quadspi.txt3
-rw-r--r--Documentation/devicetree/bindings/mtd/nxp-spifi.txt58
-rw-r--r--Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt3
-rw-r--r--Documentation/devicetree/bindings/net/cpsw.txt6
-rw-r--r--Documentation/devicetree/bindings/net/dsa/dsa.txt38
-rw-r--r--Documentation/devicetree/bindings/net/ethernet.txt4
-rw-r--r--Documentation/devicetree/bindings/net/fixed-link.txt14
-rw-r--r--Documentation/devicetree/bindings/net/keystone-netcp.txt6
-rw-r--r--Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt27
-rw-r--r--Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt (renamed from Documentation/devicetree/bindings/net/nfc/st-nci.txt)0
-rw-r--r--Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt31
-rw-r--r--Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt75
-rw-r--r--Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt (renamed from Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt)4
-rw-r--r--Documentation/devicetree/bindings/nvmem/nvmem.txt80
-rw-r--r--Documentation/devicetree/bindings/nvmem/qfprom.txt35
-rw-r--r--Documentation/devicetree/bindings/opp/opp.txt (renamed from Documentation/devicetree/bindings/power/opp.txt)40
-rw-r--r--Documentation/devicetree/bindings/panel/auo,b080uan01.txt7
-rw-r--r--Documentation/devicetree/bindings/panel/lg,lg4573.txt19
-rw-r--r--Documentation/devicetree/bindings/panel/nec,nl4827hc19-05b.txt7
-rw-r--r--Documentation/devicetree/bindings/panel/okaya,rs800480t-7x0gp.txt7
-rw-r--r--Documentation/devicetree/bindings/pci/ti-pci.txt3
-rw-r--r--Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt26
-rw-r--r--Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt22
-rw-r--r--Documentation/devicetree/bindings/phy/ti-phy.txt16
-rw-r--r--Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt37
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt86
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt36
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt36
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt24
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt7
-rw-r--r--Documentation/devicetree/bindings/power/power_domain.txt2
-rw-r--r--Documentation/devicetree/bindings/power/qcom,coincell-charger.txt48
-rw-r--r--Documentation/devicetree/bindings/power/rockchip-io-domain.txt14
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt24
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/scfg.txt18
-rw-r--r--Documentation/devicetree/bindings/regulator/da9210.txt4
-rw-r--r--Documentation/devicetree/bindings/regulator/da9211.txt32
-rw-r--r--Documentation/devicetree/bindings/regulator/max77686.txt71
-rw-r--r--Documentation/devicetree/bindings/regulator/max8973-regulator.txt6
-rw-r--r--Documentation/devicetree/bindings/regulator/mt6311-regulator.txt35
-rw-r--r--Documentation/devicetree/bindings/regulator/pwm-regulator.txt65
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt60
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator.txt1
-rw-r--r--Documentation/devicetree/bindings/reset/ath79-reset.txt20
-rw-r--r--Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt84
-rw-r--r--Documentation/devicetree/bindings/reset/socfpga-reset.txt2
-rw-r--r--Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt2
-rw-r--r--Documentation/devicetree/bindings/reset/st,sti-powerdown.txt4
-rw-r--r--Documentation/devicetree/bindings/reset/st,sti-softreset.txt4
-rw-r--r--Documentation/devicetree/bindings/reset/zynq-reset.txt68
-rw-r--r--Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt2
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-mxc.txt26
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-omap.txt1
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt15
-rw-r--r--Documentation/devicetree/bindings/serial/atmel-usart.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt6
-rw-r--r--Documentation/devicetree/bindings/serial/mtk-uart.txt6
-rw-r--r--Documentation/devicetree/bindings/serial/omap_serial.txt3
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/scpsys.txt41
-rw-r--r--Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt117
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt79
-rw-r--r--Documentation/devicetree/bindings/sound/cs4349.txt19
-rw-r--r--Documentation/devicetree/bindings/sound/ics43432.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/max98357a.txt6
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt8
-rw-r--r--Documentation/devicetree/bindings/sound/renesas,rsnd.txt22
-rw-r--r--Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/rockchip-max98090.txt19
-rw-r--r--Documentation/devicetree/bindings/sound/rockchip-rt5645.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt155
-rw-r--r--Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-davinci.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-img-spfi.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-mt65xx.txt51
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xlp.txt39
-rw-r--r--Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt28
-rw-r--r--Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt6
-rw-r--r--Documentation/devicetree/bindings/timer/st,stih407-lpc28
-rw-r--r--Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt29
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt20
-rw-r--r--Documentation/devicetree/bindings/usb/generic.txt15
-rw-r--r--Documentation/devicetree/bindings/usb/msm-hsusb.txt4
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt76
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt11
-rw-r--r--Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt (renamed from Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt)5
-rw-r--r--Documentation/devicetree/bindings/video/fsl,dcu.txt22
-rw-r--r--Documentation/devicetree/bindings/watchdog/atmel-wdt.txt2
-rw-r--r--Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt12
-rw-r--r--Documentation/dmaengine/provider.txt23
-rw-r--r--Documentation/email-clients.txt2
-rw-r--r--Documentation/fault-injection/fault-injection.txt11
-rw-r--r--Documentation/fb/sm712fb.txt31
-rw-r--r--Documentation/features/debug/uprobes/arch-support.txt2
-rw-r--r--Documentation/features/seccomp/seccomp-filter/arch-support.txt2
-rw-r--r--Documentation/features/vm/TLB/arch-support.txt40
-rw-r--r--Documentation/filesystems/btrfs.txt16
-rw-r--r--Documentation/filesystems/debugfs.txt40
-rw-r--r--Documentation/filesystems/ext2.txt4
-rw-r--r--Documentation/filesystems/ext3.txt209
-rw-r--r--Documentation/filesystems/f2fs.txt4
-rw-r--r--Documentation/filesystems/nfs/nfs-rdma.txt16
-rw-r--r--Documentation/filesystems/sysfs.txt5
-rw-r--r--Documentation/filesystems/vfs.txt2
-rw-r--r--Documentation/gpio/00-INDEX3
-rw-r--r--Documentation/gpio/consumer.txt33
-rw-r--r--Documentation/gpio/drivers-on-gpio.txt95
-rw-r--r--Documentation/gpio/sysfs.txt9
-rw-r--r--Documentation/hwmon/adm127540
-rw-r--r--Documentation/hwmon/fam15h_power10
-rw-r--r--Documentation/hwmon/it8735
-rw-r--r--Documentation/hwmon/ltc2978132
-rw-r--r--Documentation/hwmon/max2075177
-rw-r--r--Documentation/hwmon/nct78023
-rw-r--r--Documentation/hwmon/pmbus8
-rw-r--r--Documentation/input/alps.txt6
-rw-r--r--Documentation/ioctl/ioctl-number.txt4
-rw-r--r--Documentation/kernel-doc-nano-HOWTO.txt2
-rw-r--r--Documentation/kernel-parameters.txt41
-rw-r--r--Documentation/mailbox.txt6
-rw-r--r--Documentation/md-cluster.txt4
-rw-r--r--Documentation/memory-barriers.txt410
-rw-r--r--Documentation/men-chameleon-bus.txt163
-rw-r--r--Documentation/misc-devices/mei/mei.txt45
-rw-r--r--Documentation/networking/6lowpan.txt50
-rw-r--r--Documentation/networking/can.txt4
-rw-r--r--Documentation/networking/dsa/bcm_sf2.txt114
-rw-r--r--Documentation/networking/dsa/dsa.txt615
-rw-r--r--Documentation/networking/ip-sysctl.txt70
-rw-r--r--Documentation/networking/stmmac.txt16
-rw-r--r--Documentation/networking/switchdev.txt17
-rw-r--r--Documentation/networking/timestamping.txt7
-rw-r--r--Documentation/networking/vxlan.txt52
-rw-r--r--Documentation/nvmem/nvmem.txt152
-rw-r--r--Documentation/pcmcia/locking.txt2
-rw-r--r--Documentation/power/devices.txt7
-rw-r--r--Documentation/power/runtime_pm.txt4
-rw-r--r--Documentation/power/suspend-and-cpuhotplug.txt6
-rw-r--r--Documentation/powerpc/cxl.txt2
-rw-r--r--Documentation/powerpc/cxlflash.txt318
-rw-r--r--Documentation/powerpc/dscr.txt6
-rw-r--r--Documentation/powerpc/qe_firmware.txt2
-rw-r--r--Documentation/pps/pps.txt2
-rw-r--r--Documentation/s390/00-INDEX2
-rw-r--r--Documentation/s390/kvm.txt125
-rw-r--r--Documentation/static-keys.txt99
-rw-r--r--Documentation/sysctl/vm.txt10
-rw-r--r--Documentation/sysrq.txt1
-rw-r--r--Documentation/trace/coresight.txt4
-rw-r--r--Documentation/trace/ftrace.txt5
-rw-r--r--Documentation/usb/gadget-testing.txt7
-rw-r--r--Documentation/usb/power-management.txt15
-rw-r--r--Documentation/virtual/kvm/api.txt5
-rw-r--r--Documentation/vm/userfaultfd.txt144
-rw-r--r--Documentation/x86/kernel-stacks2
-rw-r--r--Documentation/x86/mtrr.txt20
-rw-r--r--Documentation/x86/zero-page.txt3
284 files changed, 8677 insertions, 1410 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus
new file mode 100644
index 000000000000..636e938d5e33
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -0,0 +1,29 @@
+What: /sys/bus/vmbus/devices/vmbus_*/id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus child_relid of the device's primary channel
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/class_id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus interface type GUID of the device
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/device_id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus interface instance GUID of the device
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/channel_vp_mapping
+Date: Jul 2015
+KernelVersion: 4.2.0
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The mapping of which primary/sub channels are bound to which
+ Virtual Processors.
+ Format: <channel's child_relid:the bound cpu's number>
+Users: tools/hv/lsvmbus
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback
index 9aae5bfb9908..06beefbcf061 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-loopback
+++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback
@@ -5,4 +5,4 @@ Description:
The attributes:
qlen - depth of loopback queue
- bulk_buflen - buffer length
+ buflen - buffer length
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
index 29477c319f61..bc7ff731aa0c 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
+++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
@@ -9,4 +9,4 @@ Description:
isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss)
isoc_mult - 0..2 (hs/ss only)
isoc_maxburst - 0..15 (ss only)
- qlen - buffer length
+ buflen - buffer length
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
index b4d0b99afffb..d72ca1736ba4 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -112,7 +112,7 @@ KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (RW) Mask to apply to all the context ID comparator.
-What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_val
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_pid
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 2fe2e3dae487..2355ed8ae31f 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -249,7 +249,7 @@ KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (RW) Select which context ID comparator to work with.
-What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_val
+What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 70c9b1ac66db..42d360fe66a5 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -413,6 +413,11 @@ Description:
to compute the calories burnt by the user.
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
+What: /sys/.../iio:deviceX/in_anglvel_scale_available
+What: /sys/.../iio:deviceX/in_magn_scale_available
+What: /sys/.../iio:deviceX/in_illuminance_scale_available
+What: /sys/.../iio:deviceX/in_intensity_scale_available
+What: /sys/.../iio:deviceX/in_proximity_scale_available
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
@@ -488,7 +493,7 @@ Contact: linux-iio@vger.kernel.org
Description:
Specifies the output powerdown mode.
DAC output stage is disconnected from the amplifier and
- 1kohm_to_gnd: connected to ground via an 1kOhm resistor,
+ 1kohm_to_gnd: connected to ground via an 1kOhm resistor,
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
@@ -498,9 +503,9 @@ Description:
outX_powerdown_mode_available. If Y is not present the
mode is shared across all outputs.
-What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
-What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
@@ -1035,13 +1040,6 @@ Contact: linux-iio@vger.kernel.org
Description:
Number of scans contained by the buffer.
-What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Bytes per scan. Due to alignment fun, the scan may be larger
- than implied directly by the scan_element parameters.
-
What: /sys/bus/iio/devices/iio:deviceX/buffer/enable
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
index 5235e6c749ab..bbb039237a25 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
+++ b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
@@ -9,3 +9,12 @@ Description:
automated testing or in situations, where other trigger methods
are not applicable. For example no RTC or spare GPIOs.
X is the IIO index of the trigger.
+
+What: /sys/bus/iio/devices/triggerX/name
+KernelVersion: 2.6.39
+Contact: linux-iio@vger.kernel.org
+Description:
+ The name attribute holds a description string for the current
+ trigger. In order to associate the trigger with an IIO device
+ one should write this name string to
+ /sys/bus/iio/devices/iio:deviceY/trigger/current_trigger.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index e5cc7633d013..864637f25bee 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -114,6 +114,20 @@ Description:
enabled for the device. Developer can write y/Y/1 or n/N/0 to
the file to enable/disable the feature.
+What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm
+Date: June 2015
+Contact: Kevin Strasser <kevin.strasser@linux.intel.com>
+Description:
+ If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
+ in to a xHCI host which supports link PM, it will check if U1
+ and U2 exit latencies have been set in the BOS descriptor; if
+ the check is is passed and the host supports USB3 hardware LPM,
+ USB3 hardware LPM will be enabled for the device and the USB
+ device directory will contain a file named
+ power/usb3_hardware_lpm. The file holds a string value (enable
+ or disable) indicating whether or not USB3 hardware LPM is
+ enabled for the device.
+
What: /sys/bus/usb/devices/.../removable
Date: February 2012
Contact: Matthew Garrett <mjg@redhat.com>
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index acfe9df83139..b07e86d4597f 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -223,3 +223,13 @@ Description: write only
Writing 1 will issue a PERST to card which may cause the card
to reload the FPGA depending on load_image_on_perst.
Users: https://github.com/ibm-capi/libcxl
+
+What: /sys/class/cxl/<card>/perst_reloads_same_image
+Date: July 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read/write
+ Trust that when an image is reloaded via PERST, it will not
+ have changed.
+ 0 = don't trust, the image may be different (default)
+ 1 = trust that the image will not change.
+Users: https://github.com/ibm-capi/libcxl
diff --git a/Documentation/ABI/testing/sysfs-class-power-twl4030 b/Documentation/ABI/testing/sysfs-class-power-twl4030
new file mode 100644
index 000000000000..be26af0f1895
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power-twl4030
@@ -0,0 +1,45 @@
+What: /sys/class/power_supply/twl4030_ac/max_current
+ /sys/class/power_supply/twl4030_usb/max_current
+Description:
+ Read/Write limit on current which may
+ be drawn from the ac (Accessory Charger) or
+ USB port.
+
+ Value is in micro-Amps.
+
+ Value is set automatically to an appropriate
+ value when a cable is plugged or unplugged.
+
+ Value can the set by writing to the attribute.
+ The change will only persist until the next
+ plug event. These event are reported via udev.
+
+
+What: /sys/class/power_supply/twl4030_usb/mode
+Description:
+ Changing mode for USB port.
+ Writing to this can disable charging.
+
+ Possible values are:
+ "auto" - draw power as appropriate for detected
+ power source and battery status.
+ "off" - do not draw any power.
+ "continuous"
+ - activate mode described as "linear" in
+ TWL data sheets. This uses whatever
+ current is available and doesn't switch off
+ when voltage drops.
+
+ This is useful for unstable power sources
+ such as bicycle dynamo, but care should
+ be taken that battery is not over-charged.
+
+What: /sys/class/power_supply/twl4030_ac/mode
+Description:
+ Changing mode for 'ac' port.
+ Writing to this can disable charging.
+
+ Possible values are:
+ "auto" - draw power as appropriate for detected
+ power source and battery status.
+ "off" - do not draw any power.
diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid
deleted file mode 100644
index ffb9536f6ecc..000000000000
--- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid
+++ /dev/null
@@ -1,22 +0,0 @@
-What: /sys/devices/*/<our-device>/eeprom
-Date: August 2013
-Contact: Oliver Schinagl <oliver@schinagl.nl>
-Description: read-only access to the SID (Security-ID) on current
- A-series SoC's from Allwinner. Currently supports A10, A10s, A13
- and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes,
- whereas the newer A20 SoC exposes 512 bytes split into sections.
- Besides the 16 bytes of SID, there's also an SJTAG area,
- HDMI-HDCP key and some custom keys. Below a quick overview, for
- details see the user manual:
- 0x000 128 bit root-key (sun[457]i)
- 0x010 128 bit boot-key (sun7i)
- 0x020 64 bit security-jtag-key (sun7i)
- 0x028 16 bit key configuration (sun7i)
- 0x02b 16 bit custom-vendor-key (sun7i)
- 0x02c 320 bit low general key (sun7i)
- 0x040 32 bit read-control access (sun7i)
- 0x064 224 bit low general key (sun7i)
- 0x080 2304 bit HDCP-key (sun7i)
- 0x1a0 768 bit high general key (sun7i)
-Users: any user space application which wants to read the SID on
- Allwinner's A-series of CPU's.
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
index c4f0fed64a6e..dca429340772 100644
--- a/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -77,3 +77,22 @@ Description:
The format is also scrambled, like in the USB mode, and it can
be summarized by converting 76543210 into GECA6420.
HGFEDCBA HFDB7531
+
+What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote
+Date: July 2015
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing the character sequence '*' followed by a newline to
+ this file will delete all of the current pairings on the
+ device. Other character sequences are reserved. This file is
+ write only.
+
+What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode
+Date: July 2015
+Contact: linux-input@vger.kernel.org
+Description:
+ Reading from this file reports the mode status of the
+ remote as indicated by the LED lights on the device. If no
+ reports have been received from the paired device, reading
+ from this file will report '-1'. The mode is read-only
+ and cannot be set through the driver.
diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/testing/sysfs-gpio
index 80f4c94c7bef..55ffa2df1c10 100644
--- a/Documentation/ABI/testing/sysfs-gpio
+++ b/Documentation/ABI/testing/sysfs-gpio
@@ -16,7 +16,8 @@ Description:
/sys/class/gpio
/export ... asks the kernel to export a GPIO to userspace
/unexport ... to return a GPIO to the kernel
- /gpioN ... for each exported GPIO #N
+ /gpioN ... for each exported GPIO #N OR
+ /<LINE-NAME> ... for a properly named GPIO line
/value ... always readable, writes fail for input GPIOs
/direction ... r/w as: in, out (default low); write: high, low
/edge ... r/w as: none, falling, rising, both
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index b713c35f8543..c06f817b3091 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -929,13 +929,11 @@ The C Programming Language, Second Edition
by Brian W. Kernighan and Dennis M. Ritchie.
Prentice Hall, Inc., 1988.
ISBN 0-13-110362-8 (paperback), 0-13-110370-9 (hardback).
-URL: http://cm.bell-labs.com/cm/cs/cbook/
The Practice of Programming
by Brian W. Kernighan and Rob Pike.
Addison-Wesley, Inc., 1999.
ISBN 0-201-61586-X.
-URL: http://cm.bell-labs.com/cm/cs/tpop/
GNU manuals - where in compliance with K&R and this text - for cpp, gcc,
gcc internals and indent, all available from http://www.gnu.org/manual/
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index b6a6a2e0dd3b..93eff64387cd 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -15,7 +15,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
80211.xml debugobjects.xml sh.xml regulator.xml \
alsa-driver-api.xml writing-an-alsa-driver.xml \
tracepoint.xml drm.xml media_api.xml w1.xml \
- writing_musb_glue_layer.xml crypto-API.xml
+ writing_musb_glue_layer.xml crypto-API.xml iio.xml
include Documentation/DocBook/media/Makefile
@@ -56,16 +56,19 @@ htmldocs: $(HTML)
MAN := $(patsubst %.xml, %.9, $(BOOKS))
mandocs: $(MAN)
- find $(obj)/man -name '*.9' | xargs gzip -f
+ find $(obj)/man -name '*.9' | xargs gzip -nf
installmandocs: mandocs
mkdir -p /usr/local/man/man9/
- install $(obj)/man/*.9.gz /usr/local/man/man9/
+ find $(obj)/man -name '*.9.gz' -printf '%h %f\n' | \
+ sort -k 2 -k 1 | uniq -f 1 | sed -e 's: :/:' | \
+ xargs install -m 644 -t /usr/local/man/man9/
###
#External programs used
-KERNELDOC = $(srctree)/scripts/kernel-doc
-DOCPROC = $(objtree)/scripts/docproc
+KERNELDOCXMLREF = $(srctree)/scripts/kernel-doc-xml-ref
+KERNELDOC = $(srctree)/scripts/kernel-doc
+DOCPROC = $(objtree)/scripts/docproc
XMLTOFLAGS = -m $(srctree)/$(src)/stylesheet.xsl
XMLTOFLAGS += --skip-validation
@@ -89,7 +92,7 @@ define rule_docproc
) > $(dir $@).$(notdir $@).cmd
endef
-%.xml: %.tmpl $(KERNELDOC) $(DOCPROC) FORCE
+%.xml: %.tmpl $(KERNELDOC) $(DOCPROC) $(KERNELDOCXMLREF) FORCE
$(call if_changed_rule,docproc)
# Tell kbuild to always build the programs
@@ -140,7 +143,20 @@ quiet_cmd_db2html = HTML $@
echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
$(patsubst %.html,%,$(notdir $@))</a><p>' > $@
-%.html: %.xml
+###
+# Rules to create an aux XML and .db, and use them to re-process the DocBook XML
+# to fill internal hyperlinks
+ gen_aux_xml = :
+ quiet_gen_aux_xml = echo ' XMLREF $@'
+silent_gen_aux_xml = :
+%.aux.xml: %.xml
+ @$($(quiet)gen_aux_xml)
+ @rm -rf $@
+ @(cat $< | egrep "^<refentry id" | egrep -o "\".*\"" | cut -f 2 -d \" > $<.db)
+ @$(KERNELDOCXMLREF) -db $<.db $< > $@
+.PRECIOUS: %.aux.xml
+
+%.html: %.aux.xml
@(which xmlto > /dev/null 2>&1) || \
(echo "*** You need to install xmlto ***"; \
exit 1)
@@ -150,12 +166,12 @@ quiet_cmd_db2html = HTML $@
cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
quiet_cmd_db2man = MAN $@
- cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; fi
+ cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man/$(*F) $< ; fi
%.9 : %.xml
@(which xmlto > /dev/null 2>&1) || \
(echo "*** You need to install xmlto ***"; \
exit 1)
- $(Q)mkdir -p $(obj)/man
+ $(Q)mkdir -p $(obj)/man/$(*F)
$(call cmd,db2man)
@touch $@
@@ -209,15 +225,18 @@ dochelp:
###
# Temporary files left by various tools
clean-files := $(DOCBOOKS) \
- $(patsubst %.xml, %.dvi, $(DOCBOOKS)) \
- $(patsubst %.xml, %.aux, $(DOCBOOKS)) \
- $(patsubst %.xml, %.tex, $(DOCBOOKS)) \
- $(patsubst %.xml, %.log, $(DOCBOOKS)) \
- $(patsubst %.xml, %.out, $(DOCBOOKS)) \
- $(patsubst %.xml, %.ps, $(DOCBOOKS)) \
- $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
- $(patsubst %.xml, %.html, $(DOCBOOKS)) \
- $(patsubst %.xml, %.9, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.dvi, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.aux, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.tex, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.log, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.out, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.ps, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.html, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.9, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.aux.xml, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.xml.db, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.xml, $(DOCBOOKS)) \
$(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
diff --git a/Documentation/DocBook/alsa-driver-api.tmpl b/Documentation/DocBook/alsa-driver-api.tmpl
index 71f9246127ec..e94a10bb4a9e 100644
--- a/Documentation/DocBook/alsa-driver-api.tmpl
+++ b/Documentation/DocBook/alsa-driver-api.tmpl
@@ -108,7 +108,7 @@
<sect1><title>ASoC Core API</title>
!Iinclude/sound/soc.h
!Esound/soc/soc-core.c
-!Esound/soc/soc-cache.c
+<!-- !Esound/soc/soc-cache.c no docbook comments here -->
!Esound/soc/soc-devres.c
!Esound/soc/soc-io.c
!Esound/soc/soc-pcm.c
diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl
index 0992531ffefb..07df23ea06e4 100644
--- a/Documentation/DocBook/crypto-API.tmpl
+++ b/Documentation/DocBook/crypto-API.tmpl
@@ -585,7 +585,7 @@ kernel crypto API | IPSEC Layer
+-----------+ |
| | (1)
| aead | <----------------------------------- esp_output
-| (seqniv) | ---+
+| (seqiv) | ---+
+-----------+ |
| (2)
+-----------+ |
@@ -1101,7 +1101,7 @@ kernel crypto API | Caller
</para>
<para>
- [1] http://www.chronox.de/libkcapi.html
+ [1] <ulink url="http://www.chronox.de/libkcapi.html">http://www.chronox.de/libkcapi.html</ulink>
</para>
</sect1>
@@ -1661,7 +1661,7 @@ read(opfd, out, outlen);
</para>
<para>
- [1] http://www.chronox.de/libkcapi.html
+ [1] <ulink url="http://www.chronox.de/libkcapi.html">http://www.chronox.de/libkcapi.html</ulink>
</para>
</sect1>
@@ -1687,7 +1687,7 @@ read(opfd, out, outlen);
!Pinclude/linux/crypto.h Block Cipher Algorithm Definitions
!Finclude/linux/crypto.h crypto_alg
!Finclude/linux/crypto.h ablkcipher_alg
-!Finclude/linux/crypto.h aead_alg
+!Finclude/crypto/aead.h aead_alg
!Finclude/linux/crypto.h blkcipher_alg
!Finclude/linux/crypto.h cipher_alg
!Finclude/crypto/rng.h rng_alg
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index faf09d4a0ea8..bbc1d7ee9c76 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -66,6 +66,7 @@
!Ekernel/time/hrtimer.c
</sect1>
<sect1><title>Workqueues and Kevents</title>
+!Iinclude/linux/workqueue.h
!Ekernel/workqueue.c
</sect1>
<sect1><title>Internal Functions</title>
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 2fb9a5457522..9ddf8c6cb887 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -3982,7 +3982,6 @@ int num_ioctls;</synopsis>
<title>Interrupt Handling</title>
!Pdrivers/gpu/drm/i915/i915_irq.c interrupt handling
!Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_init intel_irq_init_hw intel_hpd_init
-!Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_fini
!Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_disable_interrupts
!Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_enable_interrupts
</sect2>
@@ -4012,7 +4011,6 @@ int num_ioctls;</synopsis>
<title>Frontbuffer Tracking</title>
!Pdrivers/gpu/drm/i915/intel_frontbuffer.c frontbuffer tracking
!Idrivers/gpu/drm/i915/intel_frontbuffer.c
-!Fdrivers/gpu/drm/i915/intel_drv.h intel_frontbuffer_flip
!Fdrivers/gpu/drm/i915/i915_gem.c i915_gem_track_fb
</sect2>
<sect2>
@@ -4045,6 +4043,11 @@ int num_ioctls;</synopsis>
</para>
</sect2>
<sect2>
+ <title>Hotplug</title>
+!Pdrivers/gpu/drm/i915/intel_hotplug.c Hotplug
+!Idrivers/gpu/drm/i915/intel_hotplug.c
+ </sect2>
+ <sect2>
<title>High Definition Audio</title>
!Pdrivers/gpu/drm/i915/intel_audio.c High Definition Audio over HDMI and Display Port
!Idrivers/gpu/drm/i915/intel_audio.c
@@ -4195,6 +4198,23 @@ int num_ioctls;</synopsis>
!Idrivers/gpu/drm/i915/i915_gem_gtt.c
</sect2>
<sect2>
+ <title>GTT Fences and Swizzling</title>
+!Idrivers/gpu/drm/i915/i915_gem_fence.c
+ <sect3>
+ <title>Global GTT Fence Handling</title>
+!Pdrivers/gpu/drm/i915/i915_gem_fence.c fence register handling
+ </sect3>
+ <sect3>
+ <title>Hardware Tiling and Swizzling Details</title>
+!Pdrivers/gpu/drm/i915/i915_gem_fence.c tiling swizzling details
+ </sect3>
+ </sect2>
+ <sect2>
+ <title>Object Tiling IOCTLs</title>
+!Idrivers/gpu/drm/i915/i915_gem_tiling.c
+!Pdrivers/gpu/drm/i915/i915_gem_tiling.c buffer object tiling
+ </sect2>
+ <sect2>
<title>Buffer Object Eviction</title>
<para>
This section documents the interface functions for evicting buffer
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index bcdfdb9a9277..6006b6358c86 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -146,36 +146,30 @@
The journalling layer is easy to use. You need to
first of all create a journal_t data structure. There are
two calls to do this dependent on how you decide to allocate the physical
-media on which the journal resides. The journal_init_inode() call
-is for journals stored in filesystem inodes, or the journal_init_dev()
-call can be use for journal stored on a raw device (in a continuous range
+media on which the journal resides. The jbd2_journal_init_inode() call
+is for journals stored in filesystem inodes, or the jbd2_journal_init_dev()
+call can be used for journal stored on a raw device (in a continuous range
of blocks). A journal_t is a typedef for a struct pointer, so when
-you are finally finished make sure you call journal_destroy() on it
+you are finally finished make sure you call jbd2_journal_destroy() on it
to free up any used kernel memory.
</para>
<para>
Once you have got your journal_t object you need to 'mount' or load the journal
-file, unless of course you haven't initialised it yet - in which case you
-need to call journal_create().
+file. The journalling layer expects the space for the journal was already
+allocated and initialized properly by the userspace tools. When loading the
+journal you must call jbd2_journal_load() to process journal contents. If the
+client file system detects the journal contents does not need to be processed
+(or even need not have valid contents), it may call jbd2_journal_wipe() to
+clear the journal contents before calling jbd2_journal_load().
</para>
<para>
-Most of the time however your journal file will already have been created, but
-before you load it you must call journal_wipe() to empty the journal file.
-Hang on, you say , what if the filesystem wasn't cleanly umount()'d . Well, it is the
-job of the client file system to detect this and skip the call to journal_wipe().
-</para>
-
-<para>
-In either case the next call should be to journal_load() which prepares the
-journal file for use. Note that journal_wipe(..,0) calls journal_skip_recovery()
-for you if it detects any outstanding transactions in the journal and similarly
-journal_load() will call journal_recover() if necessary.
-I would advise reading fs/ext3/super.c for examples on this stage.
-[RGG: Why is the journal_wipe() call necessary - doesn't this needlessly
-complicate the API. Or isn't a good idea for the journal layer to hide
-dirty mounts from the client fs]
+Note that jbd2_journal_wipe(..,0) calls jbd2_journal_skip_recovery() for you if
+it detects any outstanding transactions in the journal and similarly
+jbd2_journal_load() will call jbd2_journal_recover() if necessary. I would
+advise reading ext4_load_journal() in fs/ext4/super.c for examples on this
+stage.
</para>
<para>
@@ -189,41 +183,41 @@ You still need to actually journal your filesystem changes, this
is done by wrapping them into transactions. Additionally you
also need to wrap the modification of each of the buffers
with calls to the journal layer, so it knows what the modifications
-you are actually making are. To do this use journal_start() which
+you are actually making are. To do this use jbd2_journal_start() which
returns a transaction handle.
</para>
<para>
-journal_start()
-and its counterpart journal_stop(), which indicates the end of a transaction
-are nestable calls, so you can reenter a transaction if necessary,
-but remember you must call journal_stop() the same number of times as
-journal_start() before the transaction is completed (or more accurately
-leaves the update phase). Ext3/VFS makes use of this feature to simplify
-quota support.
+jbd2_journal_start()
+and its counterpart jbd2_journal_stop(), which indicates the end of a
+transaction are nestable calls, so you can reenter a transaction if necessary,
+but remember you must call jbd2_journal_stop() the same number of times as
+jbd2_journal_start() before the transaction is completed (or more accurately
+leaves the update phase). Ext4/VFS makes use of this feature to simplify
+handling of inode dirtying, quota support, etc.
</para>
<para>
Inside each transaction you need to wrap the modifications to the
individual buffers (blocks). Before you start to modify a buffer you
-need to call journal_get_{create,write,undo}_access() as appropriate,
+need to call jbd2_journal_get_{create,write,undo}_access() as appropriate,
this allows the journalling layer to copy the unmodified data if it
needs to. After all the buffer may be part of a previously uncommitted
transaction.
At this point you are at last ready to modify a buffer, and once
-you are have done so you need to call journal_dirty_{meta,}data().
+you are have done so you need to call jbd2_journal_dirty_{meta,}data().
Or if you've asked for access to a buffer you now know is now longer
-required to be pushed back on the device you can call journal_forget()
+required to be pushed back on the device you can call jbd2_journal_forget()
in much the same way as you might have used bforget() in the past.
</para>
<para>
-A journal_flush() may be called at any time to commit and checkpoint
+A jbd2_journal_flush() may be called at any time to commit and checkpoint
all your transactions.
</para>
<para>
-Then at umount time , in your put_super() you can then call journal_destroy()
+Then at umount time , in your put_super() you can then call jbd2_journal_destroy()
to clean up your in-core journal object.
</para>
@@ -231,53 +225,68 @@ to clean up your in-core journal object.
Unfortunately there a couple of ways the journal layer can cause a deadlock.
The first thing to note is that each task can only have
a single outstanding transaction at any one time, remember nothing
-commits until the outermost journal_stop(). This means
+commits until the outermost jbd2_journal_stop(). This means
you must complete the transaction at the end of each file/inode/address
etc. operation you perform, so that the journalling system isn't re-entered
on another journal. Since transactions can't be nested/batched
across differing journals, and another filesystem other than
-yours (say ext3) may be modified in a later syscall.
+yours (say ext4) may be modified in a later syscall.
</para>
<para>
-The second case to bear in mind is that journal_start() can
+The second case to bear in mind is that jbd2_journal_start() can
block if there isn't enough space in the journal for your transaction
(based on the passed nblocks param) - when it blocks it merely(!) needs to
wait for transactions to complete and be committed from other tasks,
-so essentially we are waiting for journal_stop(). So to avoid
-deadlocks you must treat journal_start/stop() as if they
+so essentially we are waiting for jbd2_journal_stop(). So to avoid
+deadlocks you must treat jbd2_journal_start/stop() as if they
were semaphores and include them in your semaphore ordering rules to prevent
-deadlocks. Note that journal_extend() has similar blocking behaviour to
-journal_start() so you can deadlock here just as easily as on journal_start().
+deadlocks. Note that jbd2_journal_extend() has similar blocking behaviour to
+jbd2_journal_start() so you can deadlock here just as easily as on
+jbd2_journal_start().
</para>
<para>
Try to reserve the right number of blocks the first time. ;-). This will
be the maximum number of blocks you are going to touch in this transaction.
-I advise having a look at at least ext3_jbd.h to see the basis on which
-ext3 uses to make these decisions.
+I advise having a look at at least ext4_jbd.h to see the basis on which
+ext4 uses to make these decisions.
</para>
<para>
Another wriggle to watch out for is your on-disk block allocation strategy.
-why? Because, if you undo a delete, you need to ensure you haven't reused any
-of the freed blocks in a later transaction. One simple way of doing this
-is make sure any blocks you allocate only have checkpointed transactions
-listed against them. Ext3 does this in ext3_test_allocatable().
+Why? Because, if you do a delete, you need to ensure you haven't reused any
+of the freed blocks until the transaction freeing these blocks commits. If you
+reused these blocks and crash happens, there is no way to restore the contents
+of the reallocated blocks at the end of the last fully committed transaction.
+
+One simple way of doing this is to mark blocks as free in internal in-memory
+block allocation structures only after the transaction freeing them commits.
+Ext4 uses journal commit callback for this purpose.
+</para>
+
+<para>
+With journal commit callbacks you can ask the journalling layer to call a
+callback function when the transaction is finally committed to disk, so that
+you can do some of your own management. You ask the journalling layer for
+calling the callback by simply setting journal->j_commit_callback function
+pointer and that function is called after each transaction commit. You can also
+use transaction->t_private_list for attaching entries to a transaction that
+need processing when the transaction commits.
</para>
<para>
-Lock is also providing through journal_{un,}lock_updates(),
-ext3 uses this when it wants a window with a clean and stable fs for a moment.
-eg.
+JBD2 also provides a way to block all transaction updates via
+jbd2_journal_{un,}lock_updates(). Ext4 uses this when it wants a window with a
+clean and stable fs for a moment. E.g.
</para>
<programlisting>
- journal_lock_updates() //stop new stuff happening..
- journal_flush() // checkpoint everything.
+ jbd2_journal_lock_updates() //stop new stuff happening..
+ jbd2_journal_flush() // checkpoint everything.
..do stuff on stable fs
- journal_unlock_updates() // carry on with filesystem use.
+ jbd2_journal_unlock_updates() // carry on with filesystem use.
</programlisting>
<para>
@@ -286,29 +295,6 @@ if you allow unprivileged userspace to trigger codepaths containing these
calls.
</para>
-<para>
-A new feature of jbd since 2.5.25 is commit callbacks with the new
-journal_callback_set() function you can now ask the journalling layer
-to call you back when the transaction is finally committed to disk, so that
-you can do some of your own management. The key to this is the journal_callback
-struct, this maintains the internal callback information but you can
-extend it like this:-
-</para>
-<programlisting>
- struct myfs_callback_s {
- //Data structure element required by jbd..
- struct journal_callback for_jbd;
- // Stuff for myfs allocated together.
- myfs_inode* i_commited;
-
- }
-</programlisting>
-
-<para>
-this would be useful if you needed to know when data was committed to a
-particular inode.
-</para>
-
</sect2>
<sect2 id="jbd_summary">
@@ -319,36 +305,6 @@ being each mount, each modification (transaction) and each changed buffer
to tell the journalling layer about them.
</para>
-<para>
-Here is a some pseudo code to give you an idea of how it works, as
-an example.
-</para>
-
-<programlisting>
- journal_t* my_jnrl = journal_create();
- journal_init_{dev,inode}(jnrl,...)
- if (clean) journal_wipe();
- journal_load();
-
- foreach(transaction) { /*transactions must be
- completed before
- a syscall returns to
- userspace*/
-
- handle_t * xct=journal_start(my_jnrl);
- foreach(bh) {
- journal_get_{create,write,undo}_access(xact,bh);
- if ( myfs_modify(bh) ) { /* returns true
- if makes changes */
- journal_dirty_{meta,}data(xact,bh);
- } else {
- journal_forget(bh);
- }
- }
- journal_stop(xct);
- }
- journal_destroy(my_jrnl);
-</programlisting>
</sect2>
</sect1>
@@ -357,13 +313,13 @@ an example.
<title>Data Types</title>
<para>
The journalling layer uses typedefs to 'hide' the concrete definitions
- of the structures used. As a client of the JBD layer you can
+ of the structures used. As a client of the JBD2 layer you can
just rely on the using the pointer as a magic cookie of some sort.
Obviously the hiding is not enforced as this is 'C'.
</para>
<sect2 id="structures"><title>Structures</title>
-!Iinclude/linux/jbd.h
+!Iinclude/linux/jbd2.h
</sect2>
</sect1>
@@ -375,11 +331,11 @@ an example.
manage transactions
</para>
<sect2 id="journal_level"><title>Journal Level</title>
-!Efs/jbd/journal.c
-!Ifs/jbd/recovery.c
+!Efs/jbd2/journal.c
+!Ifs/jbd2/recovery.c
</sect2>
<sect2 id="transaction_level"><title>Transasction Level</title>
-!Efs/jbd/transaction.c
+!Efs/jbd2/transaction.c
</sect2>
</sect1>
<sect1 id="see_also">
diff --git a/Documentation/DocBook/iio.tmpl b/Documentation/DocBook/iio.tmpl
new file mode 100644
index 000000000000..06bb53de5a47
--- /dev/null
+++ b/Documentation/DocBook/iio.tmpl
@@ -0,0 +1,697 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="iioid">
+ <bookinfo>
+ <title>Industrial I/O driver developer's guide </title>
+
+ <authorgroup>
+ <author>
+ <firstname>Daniel</firstname>
+ <surname>Baluta</surname>
+ <affiliation>
+ <address>
+ <email>daniel.baluta@intel.com</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <copyright>
+ <year>2015</year>
+ <holder>Intel Corporation</holder>
+ </copyright>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+
+ <chapter id="intro">
+ <title>Introduction</title>
+ <para>
+ The main purpose of the Industrial I/O subsystem (IIO) is to provide
+ support for devices that in some sense perform either analog-to-digital
+ conversion (ADC) or digital-to-analog conversion (DAC) or both. The aim
+ is to fill the gap between the somewhat similar hwmon and input
+ subsystems.
+ Hwmon is directed at low sample rate sensors used to monitor and
+ control the system itself, like fan speed control or temperature
+ measurement. Input is, as its name suggests, focused on human interaction
+ input devices (keyboard, mouse, touchscreen). In some cases there is
+ considerable overlap between these and IIO.
+ </para>
+ <para>
+ Devices that fall into this category include:
+ <itemizedlist>
+ <listitem>
+ analog to digital converters (ADCs)
+ </listitem>
+ <listitem>
+ accelerometers
+ </listitem>
+ <listitem>
+ capacitance to digital converters (CDCs)
+ </listitem>
+ <listitem>
+ digital to analog converters (DACs)
+ </listitem>
+ <listitem>
+ gyroscopes
+ </listitem>
+ <listitem>
+ inertial measurement units (IMUs)
+ </listitem>
+ <listitem>
+ color and light sensors
+ </listitem>
+ <listitem>
+ magnetometers
+ </listitem>
+ <listitem>
+ pressure sensors
+ </listitem>
+ <listitem>
+ proximity sensors
+ </listitem>
+ <listitem>
+ temperature sensors
+ </listitem>
+ </itemizedlist>
+ Usually these sensors are connected via SPI or I2C. A common use case of the
+ sensors devices is to have combined functionality (e.g. light plus proximity
+ sensor).
+ </para>
+ </chapter>
+ <chapter id='iiosubsys'>
+ <title>Industrial I/O core</title>
+ <para>
+ The Industrial I/O core offers:
+ <itemizedlist>
+ <listitem>
+ a unified framework for writing drivers for many different types of
+ embedded sensors.
+ </listitem>
+ <listitem>
+ a standard interface to user space applications manipulating sensors.
+ </listitem>
+ </itemizedlist>
+ The implementation can be found under <filename>
+ drivers/iio/industrialio-*</filename>
+ </para>
+ <sect1 id="iiodevice">
+ <title> Industrial I/O devices </title>
+
+!Finclude/linux/iio/iio.h iio_dev
+!Fdrivers/iio/industrialio-core.c iio_device_alloc
+!Fdrivers/iio/industrialio-core.c iio_device_free
+!Fdrivers/iio/industrialio-core.c iio_device_register
+!Fdrivers/iio/industrialio-core.c iio_device_unregister
+
+ <para>
+ An IIO device usually corresponds to a single hardware sensor and it
+ provides all the information needed by a driver handling a device.
+ Let's first have a look at the functionality embedded in an IIO
+ device then we will show how a device driver makes use of an IIO
+ device.
+ </para>
+ <para>
+ There are two ways for a user space application to interact
+ with an IIO driver.
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/</filename>, this
+ represents a hardware sensor and groups together the data
+ channels of the same chip.
+ </listitem>
+ <listitem>
+ <filename>/dev/iio:deviceX</filename>, character device node
+ interface used for buffered data transfer and for events information
+ retrieval.
+ </listitem>
+ </itemizedlist>
+ </para>
+ A typical IIO driver will register itself as an I2C or SPI driver and will
+ create two routines, <function> probe </function> and <function> remove
+ </function>. At <function>probe</function>:
+ <itemizedlist>
+ <listitem>call <function>iio_device_alloc</function>, which allocates memory
+ for an IIO device.
+ </listitem>
+ <listitem> initialize IIO device fields with driver specific information
+ (e.g. device name, device channels).
+ </listitem>
+ <listitem>call <function> iio_device_register</function>, this registers the
+ device with the IIO core. After this call the device is ready to accept
+ requests from user space applications.
+ </listitem>
+ </itemizedlist>
+ At <function>remove</function>, we free the resources allocated in
+ <function>probe</function> in reverse order:
+ <itemizedlist>
+ <listitem><function>iio_device_unregister</function>, unregister the device
+ from the IIO core.
+ </listitem>
+ <listitem><function>iio_device_free</function>, free the memory allocated
+ for the IIO device.
+ </listitem>
+ </itemizedlist>
+
+ <sect2 id="iioattr"> <title> IIO device sysfs interface </title>
+ <para>
+ Attributes are sysfs files used to expose chip info and also allowing
+ applications to set various configuration parameters. For device
+ with index X, attributes can be found under
+ <filename>/sys/bus/iio/iio:deviceX/ </filename> directory.
+ Common attributes are:
+ <itemizedlist>
+ <listitem><filename>name</filename>, description of the physical
+ chip.
+ </listitem>
+ <listitem><filename>dev</filename>, shows the major:minor pair
+ associated with <filename>/dev/iio:deviceX</filename> node.
+ </listitem>
+ <listitem><filename>sampling_frequency_available</filename>,
+ available discrete set of sampling frequency values for
+ device.
+ </listitem>
+ </itemizedlist>
+ Available standard attributes for IIO devices are described in the
+ <filename>Documentation/ABI/testing/sysfs-bus-iio </filename> file
+ in the Linux kernel sources.
+ </para>
+ </sect2>
+ <sect2 id="iiochannel"> <title> IIO device channels </title>
+!Finclude/linux/iio/iio.h iio_chan_spec structure.
+ <para>
+ An IIO device channel is a representation of a data channel. An
+ IIO device can have one or multiple channels. For example:
+ <itemizedlist>
+ <listitem>
+ a thermometer sensor has one channel representing the
+ temperature measurement.
+ </listitem>
+ <listitem>
+ a light sensor with two channels indicating the measurements in
+ the visible and infrared spectrum.
+ </listitem>
+ <listitem>
+ an accelerometer can have up to 3 channels representing
+ acceleration on X, Y and Z axes.
+ </listitem>
+ </itemizedlist>
+ An IIO channel is described by the <type> struct iio_chan_spec
+ </type>. A thermometer driver for the temperature sensor in the
+ example above would have to describe its channel as follows:
+ <programlisting>
+ static const struct iio_chan_spec temp_channel[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+ };
+
+ </programlisting>
+ Channel sysfs attributes exposed to userspace are specified in
+ the form of <emphasis>bitmasks</emphasis>. Depending on their
+ shared info, attributes can be set in one of the following masks:
+ <itemizedlist>
+ <listitem><emphasis>info_mask_separate</emphasis>, attributes will
+ be specific to this channel</listitem>
+ <listitem><emphasis>info_mask_shared_by_type</emphasis>,
+ attributes are shared by all channels of the same type</listitem>
+ <listitem><emphasis>info_mask_shared_by_dir</emphasis>, attributes
+ are shared by all channels of the same direction </listitem>
+ <listitem><emphasis>info_mask_shared_by_all</emphasis>,
+ attributes are shared by all channels</listitem>
+ </itemizedlist>
+ When there are multiple data channels per channel type we have two
+ ways to distinguish between them:
+ <itemizedlist>
+ <listitem> set <emphasis> .modified</emphasis> field of <type>
+ iio_chan_spec</type> to 1. Modifiers are specified using
+ <emphasis>.channel2</emphasis> field of the same
+ <type>iio_chan_spec</type> structure and are used to indicate a
+ physically unique characteristic of the channel such as its direction
+ or spectral response. For example, a light sensor can have two channels,
+ one for infrared light and one for both infrared and visible light.
+ </listitem>
+ <listitem> set <emphasis>.indexed </emphasis> field of
+ <type>iio_chan_spec</type> to 1. In this case the channel is
+ simply another instance with an index specified by the
+ <emphasis>.channel</emphasis> field.
+ </listitem>
+ </itemizedlist>
+ Here is how we can make use of the channel's modifiers:
+ <programlisting>
+ static const struct iio_chan_spec light_channels[] = {
+ {
+ .type = IIO_INTENSITY,
+ .modified = 1,
+ .channel2 = IIO_MOD_LIGHT_IR,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ {
+ .type = IIO_INTENSITY,
+ .modified = 1,
+ .channel2 = IIO_MOD_LIGHT_BOTH,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+
+ }
+ </programlisting>
+ This channel's definition will generate two separate sysfs files
+ for raw data retrieval:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_intensity_ir_raw</filename>
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_intensity_both_raw</filename>
+ </listitem>
+ </itemizedlist>
+ one file for processed data:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_illuminance_input
+ </filename>
+ </listitem>
+ </itemizedlist>
+ and one shared sysfs file for sampling frequency:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/sampling_frequency.
+ </filename>
+ </listitem>
+ </itemizedlist>
+ </para>
+ <para>
+ Here is how we can make use of the channel's indexing:
+ <programlisting>
+ static const struct iio_chan_spec light_channels[] = {
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+ }
+ </programlisting>
+ This will generate two separate attributes files for raw data
+ retrieval:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage0_raw</filename>,
+ representing voltage measurement for channel 0.
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage1_raw</filename>,
+ representing voltage measurement for channel 1.
+ </listitem>
+ </itemizedlist>
+ </para>
+ </sect2>
+ </sect1>
+
+ <sect1 id="iiobuffer"> <title> Industrial I/O buffers </title>
+!Finclude/linux/iio/buffer.h iio_buffer
+!Edrivers/iio/industrialio-buffer.c
+
+ <para>
+ The Industrial I/O core offers a way for continuous data capture
+ based on a trigger source. Multiple data channels can be read at once
+ from <filename>/dev/iio:deviceX</filename> character device node,
+ thus reducing the CPU load.
+ </para>
+
+ <sect2 id="iiobuffersysfs">
+ <title>IIO buffer sysfs interface </title>
+ <para>
+ An IIO buffer has an associated attributes directory under <filename>
+ /sys/bus/iio/iio:deviceX/buffer/</filename>. Here are the existing
+ attributes:
+ <itemizedlist>
+ <listitem>
+ <emphasis>length</emphasis>, the total number of data samples
+ (capacity) that can be stored by the buffer.
+ </listitem>
+ <listitem>
+ <emphasis>enable</emphasis>, activate buffer capture.
+ </listitem>
+ </itemizedlist>
+
+ </para>
+ </sect2>
+ <sect2 id="iiobuffersetup"> <title> IIO buffer setup </title>
+ <para>The meta information associated with a channel reading
+ placed in a buffer is called a <emphasis> scan element </emphasis>.
+ The important bits configuring scan elements are exposed to
+ userspace applications via the <filename>
+ /sys/bus/iio/iio:deviceX/scan_elements/</filename> directory. This
+ file contains attributes of the following form:
+ <itemizedlist>
+ <listitem><emphasis>enable</emphasis>, used for enabling a channel.
+ If and only if its attribute is non zero, then a triggered capture
+ will contain data samples for this channel.
+ </listitem>
+ <listitem><emphasis>type</emphasis>, description of the scan element
+ data storage within the buffer and hence the form in which it is
+ read from user space. Format is <emphasis>
+ [be|le]:[s|u]bits/storagebitsXrepeat[>>shift] </emphasis>.
+ <itemizedlist>
+ <listitem> <emphasis>be</emphasis> or <emphasis>le</emphasis>, specifies
+ big or little endian.
+ </listitem>
+ <listitem>
+ <emphasis>s </emphasis>or <emphasis>u</emphasis>, specifies if
+ signed (2's complement) or unsigned.
+ </listitem>
+ <listitem><emphasis>bits</emphasis>, is the number of valid data
+ bits.
+ </listitem>
+ <listitem><emphasis>storagebits</emphasis>, is the number of bits
+ (after padding) that it occupies in the buffer.
+ </listitem>
+ <listitem>
+ <emphasis>shift</emphasis>, if specified, is the shift that needs
+ to be applied prior to masking out unused bits.
+ </listitem>
+ <listitem>
+ <emphasis>repeat</emphasis>, specifies the number of bits/storagebits
+ repetitions. When the repeat element is 0 or 1, then the repeat
+ value is omitted.
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ </itemizedlist>
+ For example, a driver for a 3-axis accelerometer with 12 bit
+ resolution where data is stored in two 8-bits registers as
+ follows:
+ <programlisting>
+ 7 6 5 4 3 2 1 0
+ +---+---+---+---+---+---+---+---+
+ |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06)
+ +---+---+---+---+---+---+---+---+
+
+ 7 6 5 4 3 2 1 0
+ +---+---+---+---+---+---+---+---+
+ |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07)
+ +---+---+---+---+---+---+---+---+
+ </programlisting>
+
+ will have the following scan element type for each axis:
+ <programlisting>
+ $ cat /sys/bus/iio/devices/iio:device0/scan_elements/in_accel_y_type
+ le:s12/16>>4
+ </programlisting>
+ A user space application will interpret data samples read from the
+ buffer as two byte little endian signed data, that needs a 4 bits
+ right shift before masking out the 12 valid bits of data.
+ </para>
+ <para>
+ For implementing buffer support a driver should initialize the following
+ fields in <type>iio_chan_spec</type> definition:
+ <programlisting>
+ struct iio_chan_spec {
+ /* other members */
+ int scan_index
+ struct {
+ char sign;
+ u8 realbits;
+ u8 storagebits;
+ u8 shift;
+ u8 repeat;
+ enum iio_endian endianness;
+ } scan_type;
+ };
+ </programlisting>
+ The driver implementing the accelerometer described above will
+ have the following channel definition:
+ <programlisting>
+ struct struct iio_chan_spec accel_channels[] = {
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X,
+ /* other stuff here */
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 12,
+ .storgebits = 16,
+ .shift = 4,
+ .endianness = IIO_LE,
+ },
+ }
+ /* similar for Y (with channel2 = IIO_MOD_Y, scan_index = 1)
+ * and Z (with channel2 = IIO_MOD_Z, scan_index = 2) axis
+ */
+ }
+ </programlisting>
+ </para>
+ <para>
+ Here <emphasis> scan_index </emphasis> defines the order in which
+ the enabled channels are placed inside the buffer. Channels with a lower
+ scan_index will be placed before channels with a higher index. Each
+ channel needs to have a unique scan_index.
+ </para>
+ <para>
+ Setting scan_index to -1 can be used to indicate that the specific
+ channel does not support buffered capture. In this case no entries will
+ be created for the channel in the scan_elements directory.
+ </para>
+ </sect2>
+ </sect1>
+
+ <sect1 id="iiotrigger"> <title> Industrial I/O triggers </title>
+!Finclude/linux/iio/trigger.h iio_trigger
+!Edrivers/iio/industrialio-trigger.c
+ <para>
+ In many situations it is useful for a driver to be able to
+ capture data based on some external event (trigger) as opposed
+ to periodically polling for data. An IIO trigger can be provided
+ by a device driver that also has an IIO device based on hardware
+ generated events (e.g. data ready or threshold exceeded) or
+ provided by a separate driver from an independent interrupt
+ source (e.g. GPIO line connected to some external system, timer
+ interrupt or user space writing a specific file in sysfs). A
+ trigger may initiate data capture for a number of sensors and
+ also it may be completely unrelated to the sensor itself.
+ </para>
+
+ <sect2 id="iiotrigsysfs"> <title> IIO trigger sysfs interface </title>
+ There are two locations in sysfs related to triggers:
+ <itemizedlist>
+ <listitem><filename>/sys/bus/iio/devices/triggerY</filename>,
+ this file is created once an IIO trigger is registered with
+ the IIO core and corresponds to trigger with index Y. Because
+ triggers can be very different depending on type there are few
+ standard attributes that we can describe here:
+ <itemizedlist>
+ <listitem>
+ <emphasis>name</emphasis>, trigger name that can be later
+ used for association with a device.
+ </listitem>
+ <listitem>
+ <emphasis>sampling_frequency</emphasis>, some timer based
+ triggers use this attribute to specify the frequency for
+ trigger calls.
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/trigger/</filename>, this
+ directory is created once the device supports a triggered
+ buffer. We can associate a trigger with our device by writing
+ the trigger's name in the <filename>current_trigger</filename> file.
+ </listitem>
+ </itemizedlist>
+ </sect2>
+
+ <sect2 id="iiotrigattr"> <title> IIO trigger setup</title>
+
+ <para>
+ Let's see a simple example of how to setup a trigger to be used
+ by a driver.
+
+ <programlisting>
+ struct iio_trigger_ops trigger_ops = {
+ .set_trigger_state = sample_trigger_state,
+ .validate_device = sample_validate_device,
+ }
+
+ struct iio_trigger *trig;
+
+ /* first, allocate memory for our trigger */
+ trig = iio_trigger_alloc(dev, "trig-%s-%d", name, idx);
+
+ /* setup trigger operations field */
+ trig->ops = &amp;trigger_ops;
+
+ /* now register the trigger with the IIO core */
+ iio_trigger_register(trig);
+ </programlisting>
+ </para>
+ </sect2>
+
+ <sect2 id="iiotrigsetup"> <title> IIO trigger ops</title>
+!Finclude/linux/iio/trigger.h iio_trigger_ops
+ <para>
+ Notice that a trigger has a set of operations attached:
+ <itemizedlist>
+ <listitem>
+ <function>set_trigger_state</function>, switch the trigger on/off
+ on demand.
+ </listitem>
+ <listitem>
+ <function>validate_device</function>, function to validate the
+ device when the current trigger gets changed.
+ </listitem>
+ </itemizedlist>
+ </para>
+ </sect2>
+ </sect1>
+ <sect1 id="iiotriggered_buffer">
+ <title> Industrial I/O triggered buffers </title>
+ <para>
+ Now that we know what buffers and triggers are let's see how they
+ work together.
+ </para>
+ <sect2 id="iiotrigbufsetup"> <title> IIO triggered buffer setup</title>
+!Edrivers/iio/industrialio-triggered-buffer.c
+!Finclude/linux/iio/iio.h iio_buffer_setup_ops
+
+
+ <para>
+ A typical triggered buffer setup looks like this:
+ <programlisting>
+ const struct iio_buffer_setup_ops sensor_buffer_setup_ops = {
+ .preenable = sensor_buffer_preenable,
+ .postenable = sensor_buffer_postenable,
+ .postdisable = sensor_buffer_postdisable,
+ .predisable = sensor_buffer_predisable,
+ };
+
+ irqreturn_t sensor_iio_pollfunc(int irq, void *p)
+ {
+ pf->timestamp = iio_get_time_ns();
+ return IRQ_WAKE_THREAD;
+ }
+
+ irqreturn_t sensor_trigger_handler(int irq, void *p)
+ {
+ u16 buf[8];
+ int i = 0;
+
+ /* read data for each active channel */
+ for_each_set_bit(bit, active_scan_mask, masklength)
+ buf[i++] = sensor_get_data(bit)
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buf, timestamp);
+
+ iio_trigger_notify_done(trigger);
+ return IRQ_HANDLED;
+ }
+
+ /* setup triggered buffer, usually in probe function */
+ iio_triggered_buffer_setup(indio_dev, sensor_iio_polfunc,
+ sensor_trigger_handler,
+ sensor_buffer_setup_ops);
+ </programlisting>
+ </para>
+ The important things to notice here are:
+ <itemizedlist>
+ <listitem><function> iio_buffer_setup_ops</function>, the buffer setup
+ functions to be called at predefined points in the buffer configuration
+ sequence (e.g. before enable, after disable). If not specified, the
+ IIO core uses the default <type>iio_triggered_buffer_setup_ops</type>.
+ </listitem>
+ <listitem><function>sensor_iio_pollfunc</function>, the function that
+ will be used as top half of poll function. It should do as little
+ processing as possible, because it runs in interrupt context. The most
+ common operation is recording of the current timestamp and for this reason
+ one can use the IIO core defined <function>iio_pollfunc_store_time
+ </function> function.
+ </listitem>
+ <listitem><function>sensor_trigger_handler</function>, the function that
+ will be used as bottom half of the poll function. This runs in the
+ context of a kernel thread and all the processing takes place here.
+ It usually reads data from the device and stores it in the internal
+ buffer together with the timestamp recorded in the top half.
+ </listitem>
+ </itemizedlist>
+ </sect2>
+ </sect1>
+ </chapter>
+ <chapter id='iioresources'>
+ <title> Resources </title>
+ IIO core may change during time so the best documentation to read is the
+ source code. There are several locations where you should look:
+ <itemizedlist>
+ <listitem>
+ <filename>drivers/iio/</filename>, contains the IIO core plus
+ and directories for each sensor type (e.g. accel, magnetometer,
+ etc.)
+ </listitem>
+ <listitem>
+ <filename>include/linux/iio/</filename>, contains the header
+ files, nice to read for the internal kernel interfaces.
+ </listitem>
+ <listitem>
+ <filename>include/uapi/linux/iio/</filename>, contains files to be
+ used by user space applications.
+ </listitem>
+ <listitem>
+ <filename>tools/iio/</filename>, contains tools for rapidly
+ testing buffers, events and device creation.
+ </listitem>
+ <listitem>
+ <filename>drivers/staging/iio/</filename>, contains code for some
+ drivers or experimental features that are not yet mature enough
+ to be moved out.
+ </listitem>
+ </itemizedlist>
+ <para>
+ Besides the code, there are some good online documentation sources:
+ <itemizedlist>
+ <listitem>
+ <ulink url="http://marc.info/?l=linux-iio"> Industrial I/O mailing
+ list </ulink>
+ </listitem>
+ <listitem>
+ <ulink url="http://wiki.analog.com/software/linux/docs/iio/iio">
+ Analog Device IIO wiki page </ulink>
+ </listitem>
+ <listitem>
+ <ulink url="https://fosdem.org/2015/schedule/event/iiosdr/">
+ Using the Linux IIO framework for SDR, Lars-Peter Clausen's
+ presentation at FOSDEM </ulink>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </chapter>
+</book>
+
+<!--
+vim: softtabstop=2:shiftwidth=2:expandtab:textwidth=72
+-->
diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl
index 85b25275196f..3bf4ecf3d760 100644
--- a/Documentation/DocBook/stylesheet.xsl
+++ b/Documentation/DocBook/stylesheet.xsl
@@ -5,6 +5,7 @@
<param name="funcsynopsis.tabular.threshold">80</param>
<param name="callout.graphics">0</param>
<!-- <param name="paper.type">A4</param> -->
+<param name="generate.consistent.ids">1</param>
<param name="generate.section.toc.level">2</param>
<param name="use.id.as.filename">1</param>
</stylesheet>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 93aa8604630e..21152d397b88 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -218,16 +218,16 @@ The development process
Linux kernel development process currently consists of a few different
main kernel "branches" and lots of different subsystem-specific kernel
branches. These different branches are:
- - main 3.x kernel tree
- - 3.x.y -stable kernel tree
- - 3.x -git kernel patches
+ - main 4.x kernel tree
+ - 4.x.y -stable kernel tree
+ - 4.x -git kernel patches
- subsystem specific kernel trees and patches
- - the 3.x -next kernel tree for integration tests
+ - the 4.x -next kernel tree for integration tests
-3.x kernel tree
+4.x kernel tree
-----------------
-3.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v3.x/ directory. Its development
+4.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v4.x/ directory. Its development
process is as follows:
- As soon as a new kernel is released a two weeks window is open,
during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
released according to perceived bug status, not according to a
preconceived timeline."
-3.x.y -stable kernel tree
+4.x.y -stable kernel tree
---------------------------
Kernels with 3-part versions are -stable kernels. They contain
relatively small and critical fixes for security problems or significant
-regressions discovered in a given 3.x kernel.
+regressions discovered in a given 4.x kernel.
This is the recommended branch for users who want the most recent stable
kernel and are not interested in helping test development/experimental
versions.
-If no 3.x.y kernel is available, then the highest numbered 3.x
+If no 4.x.y kernel is available, then the highest numbered 4.x
kernel is the current stable kernel.
-3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+4.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
are released as needs dictate. The normal release period is approximately
two weeks, but it can be longer if there are no pressing problems. A
security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rules.txt in the kernel tree
documents what kinds of changes are acceptable for the -stable tree, and
how the release process works.
-3.x -git patches
+4.x -git patches
------------------
These are daily snapshots of Linus' kernel tree which are managed in a
git repository (hence the name.) These patches are usually released
@@ -317,9 +317,9 @@ revisions to it, and maintainers can mark patches as under review,
accepted, or rejected. Most of these patchwork sites are listed at
http://patchwork.kernel.org/.
-3.x -next kernel tree for integration tests
+4.x -next kernel tree for integration tests
---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 3.x
+Before updates from subsystem trees are merged into the mainline 4.x
tree, they need to be integration-tested. For this purpose, a special
testing repository exists into which virtually all subsystem trees are
pulled on an almost daily basis:
diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt
index cf9431db8731..7b57fc087088 100644
--- a/Documentation/Intel-IOMMU.txt
+++ b/Documentation/Intel-IOMMU.txt
@@ -10,7 +10,7 @@ This guide gives a quick cheat sheet for some basic understanding.
Some Keywords
DMAR - DMA remapping
-DRHD - DMA Engine Reporting Structure
+DRHD - DMA Remapping Hardware Unit Definition
RMRR - Reserved memory Region Reporting Structure
ZLR - Zero length reads from PCI devices
IOVA - IO Virtual address.
diff --git a/Documentation/RCU/rcu_dereference.txt b/Documentation/RCU/rcu_dereference.txt
index 1e6c0da994f5..c0bf2441a2ba 100644
--- a/Documentation/RCU/rcu_dereference.txt
+++ b/Documentation/RCU/rcu_dereference.txt
@@ -28,7 +28,7 @@ o You must use one of the rcu_dereference() family of primitives
o Avoid cancellation when using the "+" and "-" infix arithmetic
operators. For example, for a given variable "x", avoid
"(x-x)". There are similar arithmetic pitfalls from other
- arithmetic operatiors, such as "(x*0)", "(x/(x+1))" or "(x%1)".
+ arithmetic operators, such as "(x*0)", "(x/(x+1))" or "(x%1)".
The compiler is within its rights to substitute zero for all of
these expressions, so that subsequent accesses no longer depend
on the rcu_dereference(), again possibly resulting in bugs due
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index b57c0c1cdac6..efb9454875ab 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -26,12 +26,6 @@ CONFIG_RCU_CPU_STALL_TIMEOUT
Stall-warning messages may be enabled and disabled completely via
/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.
-CONFIG_RCU_CPU_STALL_INFO
-
- This kernel configuration parameter causes the stall warning to
- print out additional per-CPU diagnostic information, including
- information on scheduling-clock ticks and RCU's idle-CPU tracking.
-
RCU_STALL_DELAY_DELTA
Although the lockdep facility is extremely useful, it does add
@@ -101,15 +95,13 @@ interact. Please note that it is not possible to entirely eliminate this
sort of false positive without resorting to things like stop_machine(),
which is overkill for this sort of problem.
-If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
-more information is printed with the stall-warning message, for example:
+Recent kernels will print a long form of the stall-warning message:
INFO: rcu_preempt detected stall on CPU
0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 softirq=82/543
(t=65000 jiffies)
-In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is
-printed:
+In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed:
INFO: rcu_preempt detected stall on CPU
0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D
@@ -171,6 +163,23 @@ message will be about three times the interval between the beginning
of the stall and the first message.
+Stall Warnings for Expedited Grace Periods
+
+If an expedited grace period detects a stall, it will place a message
+like the following in dmesg:
+
+ INFO: rcu_sched detected expedited stalls on CPUs: { 1 2 6 } 26009 jiffies s: 1043
+
+This indicates that CPUs 1, 2, and 6 have failed to respond to a
+reschedule IPI, that the expedited grace period has been going on for
+26,009 jiffies, and that the expedited grace-period sequence counter is
+1043. The fact that this last value is odd indicates that an expedited
+grace period is in flight.
+
+It is entirely possible to see stall warnings from normal and from
+expedited grace periods at about the same time from the same run.
+
+
What Causes RCU CPU Stall Warnings?
So your kernel printed an RCU CPU stall warning. The next question is
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 08651da15448..97f17e9decda 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -237,42 +237,26 @@ o "ktl" is the low-order 16 bits (in hexadecimal) of the count of
The output of "cat rcu/rcu_preempt/rcuexp" looks as follows:
-s=21872 d=21872 w=0 tf=0 wd1=0 wd2=0 n=0 sc=21872 dt=21872 dl=0 dx=21872
+s=21872 wd0=0 wd1=0 wd2=0 wd3=5 n=0 enq=0 sc=21872
These fields are as follows:
-o "s" is the starting sequence number.
+o "s" is the sequence number, with an odd number indicating that
+ an expedited grace period is in progress.
-o "d" is the ending sequence number. When the starting and ending
- numbers differ, there is an expedited grace period in progress.
-
-o "w" is the number of times that the sequence numbers have been
- in danger of wrapping.
-
-o "tf" is the number of times that contention has resulted in a
- failure to begin an expedited grace period.
-
-o "wd1" and "wd2" are the number of times that an attempt to
- start an expedited grace period found that someone else had
- completed an expedited grace period that satisfies the
+o "wd0", "wd1", "wd2", and "wd3" are the number of times that an
+ attempt to start an expedited grace period found that someone
+ else had completed an expedited grace period that satisfies the
attempted request. "Our work is done."
-o "n" is number of times that contention was so great that
- the request was demoted from an expedited grace period to
- a normal grace period.
+o "n" is number of times that a concurrent CPU-hotplug operation
+ forced a fallback to a normal grace period.
+
+o "enq" is the number of quiescent states still outstanding.
o "sc" is the number of times that the attempt to start a
new expedited grace period succeeded.
-o "dt" is the number of times that we attempted to update
- the "d" counter.
-
-o "dl" is the number of times that we failed to update the "d"
- counter.
-
-o "dx" is the number of times that we succeeded in updating
- the "d" counter.
-
The output of "cat rcu/rcu_preempt/rcugp" looks as follows:
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 5746b0c77f3e..adc2184009c5 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -883,7 +883,7 @@ All: lockdep-checked RCU-protected pointer access
rcu_access_pointer
rcu_dereference_raw
- rcu_lockdep_assert
+ RCU_LOCKDEP_WARN
rcu_sleep_check
RCU_NONIDLE
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 27e7e5edeca8..fd89b04d34f0 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -90,11 +90,11 @@ patch.
Make sure your patch does not include any extra files which do not
belong in a patch submission. Make sure to review your patch -after-
-generated it with diff(1), to ensure accuracy.
+generating it with diff(1), to ensure accuracy.
If your changes produce a lot of deltas, you need to split them into
individual patches which modify things in logical stages; see section
-#3. This will facilitate easier reviewing by other kernel developers,
+#3. This will facilitate review by other kernel developers,
very important if you want your patch accepted.
If you're using git, "git rebase -i" can help you with this process. If
@@ -267,7 +267,7 @@ You should always copy the appropriate subsystem maintainer(s) on any patch
to code that they maintain; look through the MAINTAINERS file and the
source code revision history to see who those maintainers are. The
script scripts/get_maintainer.pl can be very useful at this step. If you
-cannot find a maintainer for the subsystem your are working on, Andrew
+cannot find a maintainer for the subsystem you are working on, Andrew
Morton (akpm@linux-foundation.org) serves as a maintainer of last resort.
You should also normally choose at least one mailing list to receive a copy
@@ -291,7 +291,7 @@ sending him e-mail.
If you have a patch that fixes an exploitable security bug, send that patch
to security@kernel.org. For severe bugs, a short embargo may be considered
-to allow distrbutors to get the patch out to users; in such cases,
+to allow distributors to get the patch out to users; in such cases,
obviously, the patch should not be sent to any public lists.
Patches that fix a severe bug in a released kernel should be directed
@@ -340,7 +340,7 @@ on the changes you are submitting. It is important for a kernel
developer to be able to "quote" your changes, using standard e-mail
tools, so that they may comment on specific portions of your code.
-For this reason, all patches should be submitting e-mail "inline".
+For this reason, all patches should be submitted by e-mail "inline".
WARNING: Be wary of your editor's word-wrap corrupting your patch,
if you choose to cut-n-paste your patch.
@@ -739,7 +739,7 @@ interest on a single line; it should look something like:
git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
- to get these changes:"
+ to get these changes:
A pull request should also include an overall message saying what will be
included in the request, a "git shortlog" listing of the patches
@@ -796,7 +796,7 @@ NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
<https://lkml.org/lkml/2005/7/11/336>
Kernel Documentation/CodingStyle:
- <http://users.sosdg.org/~qiyong/lxr/source/Documentation/CodingStyle>
+ <Documentation/CodingStyle>
Linus Torvalds's mail on the canonical patch format:
<http://lkml.org/lkml/2005/4/7/183>
diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt
index f6efb1ea559a..c2505eefc878 100644
--- a/Documentation/acpi/method-tracing.txt
+++ b/Documentation/acpi/method-tracing.txt
@@ -1,26 +1,192 @@
-/sys/module/acpi/parameters/:
+ACPICA Trace Facility
-trace_method_name
- The AML method name that the user wants to trace
+Copyright (C) 2015, Intel Corporation
+Author: Lv Zheng <lv.zheng@intel.com>
-trace_debug_layer
- The temporary debug_layer used when tracing the method.
- Using 0xffffffff by default if it is 0.
-trace_debug_level
- The temporary debug_level used when tracing the method.
- Using 0x00ffffff by default if it is 0.
+Abstract:
-trace_state
- The status of the tracing feature.
+This document describes the functions and the interfaces of the method
+tracing facility.
+
+1. Functionalities and usage examples:
+
+ ACPICA provides method tracing capability. And two functions are
+ currently implemented using this capability.
+
+ A. Log reducer
+ ACPICA subsystem provides debugging outputs when CONFIG_ACPI_DEBUG is
+ enabled. The debugging messages which are deployed via
+ ACPI_DEBUG_PRINT() macro can be reduced at 2 levels - per-component
+ level (known as debug layer, configured via
+ /sys/module/acpi/parameters/debug_layer) and per-type level (known as
+ debug level, configured via /sys/module/acpi/parameters/debug_level).
+
+ But when the particular layer/level is applied to the control method
+ evaluations, the quantity of the debugging outputs may still be too
+ large to be put into the kernel log buffer. The idea thus is worked out
+ to only enable the particular debug layer/level (normally more detailed)
+ logs when the control method evaluation is started, and disable the
+ detailed logging when the control method evaluation is stopped.
+
+ The following command examples illustrate the usage of the "log reducer"
+ functionality:
+ a. Filter out the debug layer/level matched logs when control methods
+ are being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0xXXXXXXXX" > trace_debug_layer
+ # echo "0xYYYYYYYY" > trace_debug_level
+ # echo "enable" > trace_state
+ b. Filter out the debug layer/level matched logs when the specified
+ control method is being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0xXXXXXXXX" > trace_debug_layer
+ # echo "0xYYYYYYYY" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "method" > /sys/module/acpi/parameters/trace_state
+ c. Filter out the debug layer/level matched logs when the specified
+ control method is being evaluated for the first time:
+ # cd /sys/module/acpi/parameters
+ # echo "0xXXXXXXXX" > trace_debug_layer
+ # echo "0xYYYYYYYY" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "method-once" > /sys/module/acpi/parameters/trace_state
+ Where:
+ 0xXXXXXXXX/0xYYYYYYYY: Refer to Documentation/acpi/debug.txt for
+ possible debug layer/level masking values.
+ \PPPP.AAAA.TTTT.HHHH: Full path of a control method that can be found
+ in the ACPI namespace. It needn't be an entry
+ of a control method evaluation.
+
+ B. AML tracer
+
+ There are special log entries added by the method tracing facility at
+ the "trace points" the AML interpreter starts/stops to execute a control
+ method, or an AML opcode. Note that the format of the log entries are
+ subject to change:
+ [ 0.186427] exdebug-0398 ex_trace_point : Method Begin [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
+ [ 0.186630] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905c88:If] execution.
+ [ 0.186820] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905cc0:LEqual] execution.
+ [ 0.187010] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905a20:-NamePath-] execution.
+ [ 0.187214] exdebug-0398 ex_trace_point : Opcode End [0xf5905a20:-NamePath-] execution.
+ [ 0.187407] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905f60:One] execution.
+ [ 0.187594] exdebug-0398 ex_trace_point : Opcode End [0xf5905f60:One] execution.
+ [ 0.187789] exdebug-0398 ex_trace_point : Opcode End [0xf5905cc0:LEqual] execution.
+ [ 0.187980] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905cc0:Return] execution.
+ [ 0.188146] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905f60:One] execution.
+ [ 0.188334] exdebug-0398 ex_trace_point : Opcode End [0xf5905f60:One] execution.
+ [ 0.188524] exdebug-0398 ex_trace_point : Opcode End [0xf5905cc0:Return] execution.
+ [ 0.188712] exdebug-0398 ex_trace_point : Opcode End [0xf5905c88:If] execution.
+ [ 0.188903] exdebug-0398 ex_trace_point : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
- "enabled" means this feature is enabled
- and the AML method is traced every time it's executed.
+ Developers can utilize these special log entries to track the AML
+ interpretion, thus can aid issue debugging and performance tuning. Note
+ that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT()
+ macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling
+ "AML tracer" logs.
- "1" means this feature is enabled and the AML method
- will only be traced during the next execution.
+ The following command examples illustrate the usage of the "AML tracer"
+ functionality:
+ a. Filter out the method start/stop "AML tracer" logs when control
+ methods are being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "enable" > trace_state
+ b. Filter out the method start/stop "AML tracer" when the specified
+ control method is being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "method" > trace_state
+ c. Filter out the method start/stop "AML tracer" logs when the specified
+ control method is being evaluated for the first time:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "method-once" > trace_state
+ d. Filter out the method/opcode start/stop "AML tracer" when the
+ specified control method is being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "opcode" > trace_state
+ e. Filter out the method/opcode start/stop "AML tracer" when the
+ specified control method is being evaluated for the first time:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "opcode-opcode" > trace_state
- "disabled" means this feature is disabled.
- Users can enable/disable this debug tracing feature by
- "echo string > /sys/module/acpi/parameters/trace_state".
- "string" should be one of "enable", "disable" and "1".
+ Note that all above method tracing facility related module parameters can
+ be used as the boot parameters, for example:
+ acpi.trace_debug_layer=0x80 acpi.trace_debug_level=0x10 \
+ acpi.trace_method_name=\_SB.LID0._LID acpi.trace_state=opcode-once
+
+2. Interface descriptions:
+
+ All method tracing functions can be configured via ACPI module
+ parameters that are accessible at /sys/module/acpi/parameters/:
+
+ trace_method_name
+ The full path of the AML method that the user wants to trace.
+ Note that the full path shouldn't contain the trailing "_"s in its
+ name segments but may contain "\" to form an absolute path.
+
+ trace_debug_layer
+ The temporary debug_layer used when the tracing feature is enabled.
+ Using ACPI_EXECUTER (0x80) by default, which is the debug_layer
+ used to match all "AML tracer" logs.
+
+ trace_debug_level
+ The temporary debug_level used when the tracing feature is enabled.
+ Using ACPI_LV_TRACE_POINT (0x10) by default, which is the
+ debug_level used to match all "AML tracer" logs.
+
+ trace_state
+ The status of the tracing feature.
+ Users can enable/disable this debug tracing feature by executing
+ the following command:
+ # echo string > /sys/module/acpi/parameters/trace_state
+ Where "string" should be one of the followings:
+ "disable"
+ Disable the method tracing feature.
+ "enable"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during any method
+ execution will be logged.
+ "method"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during method execution
+ of "trace_method_name" will be logged.
+ "method-once"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during method execution
+ of "trace_method_name" will be logged only once.
+ "opcode"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during method/opcode
+ execution of "trace_method_name" will be logged.
+ "opcode-once"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during method/opcode
+ execution of "trace_method_name" will be logged only once.
+ Note that, the difference between the "enable" and other feature
+ enabling options are:
+ 1. When "enable" is specified, since
+ "trace_debug_layer/trace_debug_level" shall apply to all control
+ method evaluations, after configuring "trace_state" to "enable",
+ "trace_method_name" will be reset to NULL.
+ 2. When "method/opcode" is specified, if
+ "trace_method_name" is NULL when "trace_state" is configured to
+ these options, the "trace_debug_layer/trace_debug_level" will
+ apply to all control method evaluations.
diff --git a/Documentation/adding-syscalls.txt b/Documentation/adding-syscalls.txt
new file mode 100644
index 000000000000..cc2d4ac4f404
--- /dev/null
+++ b/Documentation/adding-syscalls.txt
@@ -0,0 +1,527 @@
+Adding a New System Call
+========================
+
+This document describes what's involved in adding a new system call to the
+Linux kernel, over and above the normal submission advice in
+Documentation/SubmittingPatches.
+
+
+System Call Alternatives
+------------------------
+
+The first thing to consider when adding a new system call is whether one of
+the alternatives might be suitable instead. Although system calls are the
+most traditional and most obvious interaction points between userspace and the
+kernel, there are other possibilities -- choose what fits best for your
+interface.
+
+ - If the operations involved can be made to look like a filesystem-like
+ object, it may make more sense to create a new filesystem or device. This
+ also makes it easier to encapsulate the new functionality in a kernel module
+ rather than requiring it to be built into the main kernel.
+ - If the new functionality involves operations where the kernel notifies
+ userspace that something has happened, then returning a new file
+ descriptor for the relevant object allows userspace to use
+ poll/select/epoll to receive that notification.
+ - However, operations that don't map to read(2)/write(2)-like operations
+ have to be implemented as ioctl(2) requests, which can lead to a
+ somewhat opaque API.
+ - If you're just exposing runtime system information, a new node in sysfs
+ (see Documentation/filesystems/sysfs.txt) or the /proc filesystem may be
+ more appropriate. However, access to these mechanisms requires that the
+ relevant filesystem is mounted, which might not always be the case (e.g.
+ in a namespaced/sandboxed/chrooted environment). Avoid adding any API to
+ debugfs, as this is not considered a 'production' interface to userspace.
+ - If the operation is specific to a particular file or file descriptor, then
+ an additional fcntl(2) command option may be more appropriate. However,
+ fcntl(2) is a multiplexing system call that hides a lot of complexity, so
+ this option is best for when the new function is closely analogous to
+ existing fcntl(2) functionality, or the new functionality is very simple
+ (for example, getting/setting a simple flag related to a file descriptor).
+ - If the operation is specific to a particular task or process, then an
+ additional prctl(2) command option may be more appropriate. As with
+ fcntl(2), this system call is a complicated multiplexor so is best reserved
+ for near-analogs of existing prctl() commands or getting/setting a simple
+ flag related to a process.
+
+
+Designing the API: Planning for Extension
+-----------------------------------------
+
+A new system call forms part of the API of the kernel, and has to be supported
+indefinitely. As such, it's a very good idea to explicitly discuss the
+interface on the kernel mailing list, and it's important to plan for future
+extensions of the interface.
+
+(The syscall table is littered with historical examples where this wasn't done,
+together with the corresponding follow-up system calls -- eventfd/eventfd2,
+dup2/dup3, inotify_init/inotify_init1, pipe/pipe2, renameat/renameat2 -- so
+learn from the history of the kernel and plan for extensions from the start.)
+
+For simpler system calls that only take a couple of arguments, the preferred
+way to allow for future extensibility is to include a flags argument to the
+system call. To make sure that userspace programs can safely use flags
+between kernel versions, check whether the flags value holds any unknown
+flags, and reject the system call (with EINVAL) if it does:
+
+ if (flags & ~(THING_FLAG1 | THING_FLAG2 | THING_FLAG3))
+ return -EINVAL;
+
+(If no flags values are used yet, check that the flags argument is zero.)
+
+For more sophisticated system calls that involve a larger number of arguments,
+it's preferred to encapsulate the majority of the arguments into a structure
+that is passed in by pointer. Such a structure can cope with future extension
+by including a size argument in the structure:
+
+ struct xyzzy_params {
+ u32 size; /* userspace sets p->size = sizeof(struct xyzzy_params) */
+ u32 param_1;
+ u64 param_2;
+ u64 param_3;
+ };
+
+As long as any subsequently added field, say param_4, is designed so that a
+zero value gives the previous behaviour, then this allows both directions of
+version mismatch:
+
+ - To cope with a later userspace program calling an older kernel, the kernel
+ code should check that any memory beyond the size of the structure that it
+ expects is zero (effectively checking that param_4 == 0).
+ - To cope with an older userspace program calling a newer kernel, the kernel
+ code can zero-extend a smaller instance of the structure (effectively
+ setting param_4 = 0).
+
+See perf_event_open(2) and the perf_copy_attr() function (in
+kernel/events/core.c) for an example of this approach.
+
+
+Designing the API: Other Considerations
+---------------------------------------
+
+If your new system call allows userspace to refer to a kernel object, it
+should use a file descriptor as the handle for that object -- don't invent a
+new type of userspace object handle when the kernel already has mechanisms and
+well-defined semantics for using file descriptors.
+
+If your new xyzzy(2) system call does return a new file descriptor, then the
+flags argument should include a value that is equivalent to setting O_CLOEXEC
+on the new FD. This makes it possible for userspace to close the timing
+window between xyzzy() and calling fcntl(fd, F_SETFD, FD_CLOEXEC), where an
+unexpected fork() and execve() in another thread could leak a descriptor to
+the exec'ed program. (However, resist the temptation to re-use the actual value
+of the O_CLOEXEC constant, as it is architecture-specific and is part of a
+numbering space of O_* flags that is fairly full.)
+
+If your system call returns a new file descriptor, you should also consider
+what it means to use the poll(2) family of system calls on that file
+descriptor. Making a file descriptor ready for reading or writing is the
+normal way for the kernel to indicate to userspace that an event has
+occurred on the corresponding kernel object.
+
+If your new xyzzy(2) system call involves a filename argument:
+
+ int sys_xyzzy(const char __user *path, ..., unsigned int flags);
+
+you should also consider whether an xyzzyat(2) version is more appropriate:
+
+ int sys_xyzzyat(int dfd, const char __user *path, ..., unsigned int flags);
+
+This allows more flexibility for how userspace specifies the file in question;
+in particular it allows userspace to request the functionality for an
+already-opened file descriptor using the AT_EMPTY_PATH flag, effectively giving
+an fxyzzy(3) operation for free:
+
+ - xyzzyat(AT_FDCWD, path, ..., 0) is equivalent to xyzzy(path,...)
+ - xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...)
+
+(For more details on the rationale of the *at() calls, see the openat(2) man
+page; for an example of AT_EMPTY_PATH, see the statat(2) man page.)
+
+If your new xyzzy(2) system call involves a parameter describing an offset
+within a file, make its type loff_t so that 64-bit offsets can be supported
+even on 32-bit architectures.
+
+If your new xyzzy(2) system call involves privileged functionality, it needs
+to be governed by the appropriate Linux capability bit (checked with a call to
+capable()), as described in the capabilities(7) man page. Choose an existing
+capability bit that governs related functionality, but try to avoid combining
+lots of only vaguely related functions together under the same bit, as this
+goes against capabilities' purpose of splitting the power of root. In
+particular, avoid adding new uses of the already overly-general CAP_SYS_ADMIN
+capability.
+
+If your new xyzzy(2) system call manipulates a process other than the calling
+process, it should be restricted (using a call to ptrace_may_access()) so that
+only a calling process with the same permissions as the target process, or
+with the necessary capabilities, can manipulate the target process.
+
+Finally, be aware that some non-x86 architectures have an easier time if
+system call parameters that are explicitly 64-bit fall on odd-numbered
+arguments (i.e. parameter 1, 3, 5), to allow use of contiguous pairs of 32-bit
+registers. (This concern does not apply if the arguments are part of a
+structure that's passed in by pointer.)
+
+
+Proposing the API
+-----------------
+
+To make new system calls easy to review, it's best to divide up the patchset
+into separate chunks. These should include at least the following items as
+distinct commits (each of which is described further below):
+
+ - The core implementation of the system call, together with prototypes,
+ generic numbering, Kconfig changes and fallback stub implementation.
+ - Wiring up of the new system call for one particular architecture, usually
+ x86 (including all of x86_64, x86_32 and x32).
+ - A demonstration of the use of the new system call in userspace via a
+ selftest in tools/testing/selftests/.
+ - A draft man-page for the new system call, either as plain text in the
+ cover letter, or as a patch to the (separate) man-pages repository.
+
+New system call proposals, like any change to the kernel's API, should always
+be cc'ed to linux-api@vger.kernel.org.
+
+
+Generic System Call Implementation
+----------------------------------
+
+The main entry point for your new xyzzy(2) system call will be called
+sys_xyzzy(), but you add this entry point with the appropriate
+SYSCALL_DEFINEn() macro rather than explicitly. The 'n' indicates the number
+of arguments to the system call, and the macro takes the system call name
+followed by the (type, name) pairs for the parameters as arguments. Using
+this macro allows metadata about the new system call to be made available for
+other tools.
+
+The new entry point also needs a corresponding function prototype, in
+include/linux/syscalls.h, marked as asmlinkage to match the way that system
+calls are invoked:
+
+ asmlinkage long sys_xyzzy(...);
+
+Some architectures (e.g. x86) have their own architecture-specific syscall
+tables, but several other architectures share a generic syscall table. Add your
+new system call to the generic list by adding an entry to the list in
+include/uapi/asm-generic/unistd.h:
+
+ #define __NR_xyzzy 292
+ __SYSCALL(__NR_xyzzy, sys_xyzzy)
+
+Also update the __NR_syscalls count to reflect the additional system call, and
+note that if multiple new system calls are added in the same merge window,
+your new syscall number may get adjusted to resolve conflicts.
+
+The file kernel/sys_ni.c provides a fallback stub implementation of each system
+call, returning -ENOSYS. Add your new system call here too:
+
+ cond_syscall(sys_xyzzy);
+
+Your new kernel functionality, and the system call that controls it, should
+normally be optional, so add a CONFIG option (typically to init/Kconfig) for
+it. As usual for new CONFIG options:
+
+ - Include a description of the new functionality and system call controlled
+ by the option.
+ - Make the option depend on EXPERT if it should be hidden from normal users.
+ - Make any new source files implementing the function dependent on the CONFIG
+ option in the Makefile (e.g. "obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.c").
+ - Double check that the kernel still builds with the new CONFIG option turned
+ off.
+
+To summarize, you need a commit that includes:
+
+ - CONFIG option for the new function, normally in init/Kconfig
+ - SYSCALL_DEFINEn(xyzzy, ...) for the entry point
+ - corresponding prototype in include/linux/syscalls.h
+ - generic table entry in include/uapi/asm-generic/unistd.h
+ - fallback stub in kernel/sys_ni.c
+
+
+x86 System Call Implementation
+------------------------------
+
+To wire up your new system call for x86 platforms, you need to update the
+master syscall tables. Assuming your new system call isn't special in some
+way (see below), this involves a "common" entry (for x86_64 and x32) in
+arch/x86/entry/syscalls/syscall_64.tbl:
+
+ 333 common xyzzy sys_xyzzy
+
+and an "i386" entry in arch/x86/entry/syscalls/syscall_32.tbl:
+
+ 380 i386 xyzzy sys_xyzzy
+
+Again, these numbers are liable to be changed if there are conflicts in the
+relevant merge window.
+
+
+Compatibility System Calls (Generic)
+------------------------------------
+
+For most system calls the same 64-bit implementation can be invoked even when
+the userspace program is itself 32-bit; even if the system call's parameters
+include an explicit pointer, this is handled transparently.
+
+However, there are a couple of situations where a compatibility layer is
+needed to cope with size differences between 32-bit and 64-bit.
+
+The first is if the 64-bit kernel also supports 32-bit userspace programs, and
+so needs to parse areas of (__user) memory that could hold either 32-bit or
+64-bit values. In particular, this is needed whenever a system call argument
+is:
+
+ - a pointer to a pointer
+ - a pointer to a struct containing a pointer (e.g. struct iovec __user *)
+ - a pointer to a varying sized integral type (time_t, off_t, long, ...)
+ - a pointer to a struct containing a varying sized integral type.
+
+The second situation that requires a compatibility layer is if one of the
+system call's arguments has a type that is explicitly 64-bit even on a 32-bit
+architecture, for example loff_t or __u64. In this case, a value that arrives
+at a 64-bit kernel from a 32-bit application will be split into two 32-bit
+values, which then need to be re-assembled in the compatibility layer.
+
+(Note that a system call argument that's a pointer to an explicit 64-bit type
+does *not* need a compatibility layer; for example, splice(2)'s arguments of
+type loff_t __user * do not trigger the need for a compat_ system call.)
+
+The compatibility version of the system call is called compat_sys_xyzzy(), and
+is added with the COMPAT_SYSCALL_DEFINEn() macro, analogously to
+SYSCALL_DEFINEn. This version of the implementation runs as part of a 64-bit
+kernel, but expects to receive 32-bit parameter values and does whatever is
+needed to deal with them. (Typically, the compat_sys_ version converts the
+values to 64-bit versions and either calls on to the sys_ version, or both of
+them call a common inner implementation function.)
+
+The compat entry point also needs a corresponding function prototype, in
+include/linux/compat.h, marked as asmlinkage to match the way that system
+calls are invoked:
+
+ asmlinkage long compat_sys_xyzzy(...);
+
+If the system call involves a structure that is laid out differently on 32-bit
+and 64-bit systems, say struct xyzzy_args, then the include/linux/compat.h
+header file should also include a compat version of the structure (struct
+compat_xyzzy_args) where each variable-size field has the appropriate compat_
+type that corresponds to the type in struct xyzzy_args. The
+compat_sys_xyzzy() routine can then use this compat_ structure to parse the
+arguments from a 32-bit invocation.
+
+For example, if there are fields:
+
+ struct xyzzy_args {
+ const char __user *ptr;
+ __kernel_long_t varying_val;
+ u64 fixed_val;
+ /* ... */
+ };
+
+in struct xyzzy_args, then struct compat_xyzzy_args would have:
+
+ struct compat_xyzzy_args {
+ compat_uptr_t ptr;
+ compat_long_t varying_val;
+ u64 fixed_val;
+ /* ... */
+ };
+
+The generic system call list also needs adjusting to allow for the compat
+version; the entry in include/uapi/asm-generic/unistd.h should use
+__SC_COMP rather than __SYSCALL:
+
+ #define __NR_xyzzy 292
+ __SC_COMP(__NR_xyzzy, sys_xyzzy, compat_sys_xyzzy)
+
+To summarize, you need:
+
+ - a COMPAT_SYSCALL_DEFINEn(xyzzy, ...) for the compat entry point
+ - corresponding prototype in include/linux/compat.h
+ - (if needed) 32-bit mapping struct in include/linux/compat.h
+ - instance of __SC_COMP not __SYSCALL in include/uapi/asm-generic/unistd.h
+
+
+Compatibility System Calls (x86)
+--------------------------------
+
+To wire up the x86 architecture of a system call with a compatibility version,
+the entries in the syscall tables need to be adjusted.
+
+First, the entry in arch/x86/entry/syscalls/syscall_32.tbl gets an extra
+column to indicate that a 32-bit userspace program running on a 64-bit kernel
+should hit the compat entry point:
+
+ 380 i386 xyzzy sys_xyzzy compat_sys_xyzzy
+
+Second, you need to figure out what should happen for the x32 ABI version of
+the new system call. There's a choice here: the layout of the arguments
+should either match the 64-bit version or the 32-bit version.
+
+If there's a pointer-to-a-pointer involved, the decision is easy: x32 is
+ILP32, so the layout should match the 32-bit version, and the entry in
+arch/x86/entry/syscalls/syscall_64.tbl is split so that x32 programs hit the
+compatibility wrapper:
+
+ 333 64 xyzzy sys_xyzzy
+ ...
+ 555 x32 xyzzy compat_sys_xyzzy
+
+If no pointers are involved, then it is preferable to re-use the 64-bit system
+call for the x32 ABI (and consequently the entry in
+arch/x86/entry/syscalls/syscall_64.tbl is unchanged).
+
+In either case, you should check that the types involved in your argument
+layout do indeed map exactly from x32 (-mx32) to either the 32-bit (-m32) or
+64-bit (-m64) equivalents.
+
+
+System Calls Returning Elsewhere
+--------------------------------
+
+For most system calls, once the system call is complete the user program
+continues exactly where it left off -- at the next instruction, with the
+stack the same and most of the registers the same as before the system call,
+and with the same virtual memory space.
+
+However, a few system calls do things differently. They might return to a
+different location (rt_sigreturn) or change the memory space (fork/vfork/clone)
+or even architecture (execve/execveat) of the program.
+
+To allow for this, the kernel implementation of the system call may need to
+save and restore additional registers to the kernel stack, allowing complete
+control of where and how execution continues after the system call.
+
+This is arch-specific, but typically involves defining assembly entry points
+that save/restore additional registers and invoke the real system call entry
+point.
+
+For x86_64, this is implemented as a stub_xyzzy entry point in
+arch/x86/entry/entry_64.S, and the entry in the syscall table
+(arch/x86/entry/syscalls/syscall_64.tbl) is adjusted to match:
+
+ 333 common xyzzy stub_xyzzy
+
+The equivalent for 32-bit programs running on a 64-bit kernel is normally
+called stub32_xyzzy and implemented in arch/x86/entry/entry_64_compat.S,
+with the corresponding syscall table adjustment in
+arch/x86/entry/syscalls/syscall_32.tbl:
+
+ 380 i386 xyzzy sys_xyzzy stub32_xyzzy
+
+If the system call needs a compatibility layer (as in the previous section)
+then the stub32_ version needs to call on to the compat_sys_ version of the
+system call rather than the native 64-bit version. Also, if the x32 ABI
+implementation is not common with the x86_64 version, then its syscall
+table will also need to invoke a stub that calls on to the compat_sys_
+version.
+
+For completeness, it's also nice to set up a mapping so that user-mode Linux
+still works -- its syscall table will reference stub_xyzzy, but the UML build
+doesn't include arch/x86/entry/entry_64.S implementation (because UML
+simulates registers etc). Fixing this is as simple as adding a #define to
+arch/x86/um/sys_call_table_64.c:
+
+ #define stub_xyzzy sys_xyzzy
+
+
+Other Details
+-------------
+
+Most of the kernel treats system calls in a generic way, but there is the
+occasional exception that may need updating for your particular system call.
+
+The audit subsystem is one such special case; it includes (arch-specific)
+functions that classify some special types of system call -- specifically
+file open (open/openat), program execution (execve/exeveat) or socket
+multiplexor (socketcall) operations. If your new system call is analogous to
+one of these, then the audit system should be updated.
+
+More generally, if there is an existing system call that is analogous to your
+new system call, it's worth doing a kernel-wide grep for the existing system
+call to check there are no other special cases.
+
+
+Testing
+-------
+
+A new system call should obviously be tested; it is also useful to provide
+reviewers with a demonstration of how user space programs will use the system
+call. A good way to combine these aims is to include a simple self-test
+program in a new directory under tools/testing/selftests/.
+
+For a new system call, there will obviously be no libc wrapper function and so
+the test will need to invoke it using syscall(); also, if the system call
+involves a new userspace-visible structure, the corresponding header will need
+to be installed to compile the test.
+
+Make sure the selftest runs successfully on all supported architectures. For
+example, check that it works when compiled as an x86_64 (-m64), x86_32 (-m32)
+and x32 (-mx32) ABI program.
+
+For more extensive and thorough testing of new functionality, you should also
+consider adding tests to the Linux Test Project, or to the xfstests project
+for filesystem-related changes.
+ - https://linux-test-project.github.io/
+ - git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git
+
+
+Man Page
+--------
+
+All new system calls should come with a complete man page, ideally using groff
+markup, but plain text will do. If groff is used, it's helpful to include a
+pre-rendered ASCII version of the man page in the cover email for the
+patchset, for the convenience of reviewers.
+
+The man page should be cc'ed to linux-man@vger.kernel.org
+For more details, see https://www.kernel.org/doc/man-pages/patches.html
+
+References and Sources
+----------------------
+
+ - LWN article from Michael Kerrisk on use of flags argument in system calls:
+ https://lwn.net/Articles/585415/
+ - LWN article from Michael Kerrisk on how to handle unknown flags in a system
+ call: https://lwn.net/Articles/588444/
+ - LWN article from Jake Edge describing constraints on 64-bit system call
+ arguments: https://lwn.net/Articles/311630/
+ - Pair of LWN articles from David Drysdale that describe the system call
+ implementation paths in detail for v3.14:
+ - https://lwn.net/Articles/604287/
+ - https://lwn.net/Articles/604515/
+ - Architecture-specific requirements for system calls are discussed in the
+ syscall(2) man-page:
+ http://man7.org/linux/man-pages/man2/syscall.2.html#NOTES
+ - Collated emails from Linus Torvalds discussing the problems with ioctl():
+ http://yarchive.net/comp/linux/ioctl.html
+ - "How to not invent kernel interfaces", Arnd Bergmann,
+ http://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf
+ - LWN article from Michael Kerrisk on avoiding new uses of CAP_SYS_ADMIN:
+ https://lwn.net/Articles/486306/
+ - Recommendation from Andrew Morton that all related information for a new
+ system call should come in the same email thread:
+ https://lkml.org/lkml/2014/7/24/641
+ - Recommendation from Michael Kerrisk that a new system call should come with
+ a man page: https://lkml.org/lkml/2014/6/13/309
+ - Suggestion from Thomas Gleixner that x86 wire-up should be in a separate
+ commit: https://lkml.org/lkml/2014/11/19/254
+ - Suggestion from Greg Kroah-Hartman that it's good for new system calls to
+ come with a man-page & selftest: https://lkml.org/lkml/2014/3/19/710
+ - Discussion from Michael Kerrisk of new system call vs. prctl(2) extension:
+ https://lkml.org/lkml/2014/6/3/411
+ - Suggestion from Ingo Molnar that system calls that involve multiple
+ arguments should encapsulate those arguments in a struct, which includes a
+ size field for future extensibility: https://lkml.org/lkml/2015/7/30/117
+ - Numbering oddities arising from (re-)use of O_* numbering space flags:
+ - commit 75069f2b5bfb ("vfs: renumber FMODE_NONOTIFY and add to uniqueness
+ check")
+ - commit 12ed2e36c98a ("fanotify: FMODE_NONOTIFY and __O_SYNC in sparc
+ conflict")
+ - commit bb458c644a59 ("Safer ABI for O_TMPFILE")
+ - Discussion from Matthew Wilcox about restrictions on 64-bit arguments:
+ https://lkml.org/lkml/2008/12/12/187
+ - Recommendation from Greg Kroah-Hartman that unknown flags should be
+ policed: https://lkml.org/lkml/2014/7/17/577
+ - Recommendation from Linus Torvalds that x32 system calls should prefer
+ compatibility with 64-bit versions rather than 32-bit versions:
+ https://lkml.org/lkml/2011/8/31/244
diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Atmel/README
index c53a19b4aab2..0931cf7e2e56 100644
--- a/Documentation/arm/Atmel/README
+++ b/Documentation/arm/Atmel/README
@@ -90,6 +90,11 @@ the Atmel website: http://www.atmel.com.
+ Datasheet
http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
+ - sama5d2 family
+ - sama5d27
+ + Datasheet
+ Coming soon
+
Linux kernel information
------------------------
diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/Samsung/Bootloader-interface.txt
index b96ead9a6919..df8d4fb85939 100644
--- a/Documentation/arm/Samsung/Bootloader-interface.txt
+++ b/Documentation/arm/Samsung/Bootloader-interface.txt
@@ -15,6 +15,7 @@ executing kernel.
1. Non-Secure mode
+
Address: sysram_ns_base_addr
Offset Value Purpose
=============================================================================
@@ -28,6 +29,7 @@ Offset Value Purpose
2. Secure mode
+
Address: sysram_base_addr
Offset Value Purpose
=============================================================================
@@ -40,14 +42,25 @@ Offset Value Purpose
Address: pmu_base_addr
Offset Value Purpose
=============================================================================
-0x0800 exynos_cpu_resume AFTR
+0x0800 exynos_cpu_resume AFTR, suspend
+0x0800 mcpm_entry_point (Exynos542x with MCPM) AFTR, suspend
+0x0804 0xfcba0d10 (Magic cookie) AFTR
+0x0804 0x00000bad (Magic cookie) System suspend
0x0814 exynos4_secondary_startup (Exynos4210 r1.1) Secondary CPU boot
0x0818 0xfcba0d10 (Magic cookie, Exynos4210 r1.1) AFTR
0x081C exynos_cpu_resume (Exynos4210 r1.1) AFTR
3. Other (regardless of secure/non-secure mode)
+
Address: pmu_base_addr
Offset Value Purpose
=============================================================================
0x0908 Non-zero (only Exynos3250) Secondary CPU boot up indicator
+
+
+4. Glossary
+
+AFTR - ARM Off Top Running, a low power mode, Cortex cores and many other
+modules are power gated, except the TOP modules
+MCPM - Multi-Cluster Power Management
diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt
new file mode 100644
index 000000000000..f17bc4c9dff9
--- /dev/null
+++ b/Documentation/arm/keystone/Overview.txt
@@ -0,0 +1,73 @@
+ TI Keystone Linux Overview
+ --------------------------
+
+Introduction
+------------
+Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors
+and c66x DSP cores. This document describes essential information required
+for users to run Linux on Keystone based EVMs from Texas Instruments.
+
+Following SoCs & EVMs are currently supported:-
+
+------------ K2HK SoC and EVM --------------------------------------------------
+
+a.k.a Keystone 2 Hawking/Kepler SoC
+TCI6636K2H & TCI6636K2K: See documentation at
+ http://www.ti.com/product/tci6638k2k
+ http://www.ti.com/product/tci6638k2h
+
+EVM:
+http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
+
+------------ K2E SoC and EVM ---------------------------------------------------
+
+a.k.a Keystone 2 Edison SoC
+K2E - 66AK2E05: See documentation at
+ http://www.ti.com/product/66AK2E05/technicaldocuments
+
+EVM:
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+
+------------ K2L SoC and EVM ---------------------------------------------------
+
+a.k.a Keystone 2 Lamarr SoC
+K2L - TCI6630K2L: See documentation at
+ http://www.ti.com/product/TCI6630K2L/technicaldocuments
+EVM:
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
+
+Configuration
+-------------
+
+All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
+image is used to boot on individual EVMs. The platform configuration is
+specified through DTS. Following are the DTS used:-
+ K2HK EVM : k2hk-evm.dts
+ K2E EVM : k2e-evm.dts
+ K2L EVM : k2l-evm.dts
+
+The device tree documentation for the keystone machines are located at
+ Documentation/devicetree/bindings/arm/keystone/keystone.txt
+
+Known issues & workaround
+-------------------------
+
+Some of the device drivers used on keystone are re-used from that from
+DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
+Some of the keystone specific drivers such as netcp uses run time power
+management API instead to enable clock. As this API has limitations on
+keystone, following workaround is needed to boot Linux.
+
+ Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
+ clock frameworks will try to disable clocks that are unused and disable
+ the hardware. This is because netcp related power domain and clock
+ domains are enabled in u-boot as run time power management API currently
+ doesn't enable clocks for netcp due to a limitation. This workaround is
+ expected to be removed in the future when proper API support becomes
+ available. Until then, this work around is needed.
+
+
+Document Author
+---------------
+Murali Karicheri <m-karicheri2@ti.com>
+Copyright 2015 Texas Instruments
diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt
index 1690350f16e7..7d9d3c2286b2 100644
--- a/Documentation/arm64/booting.txt
+++ b/Documentation/arm64/booting.txt
@@ -81,7 +81,7 @@ The decompressed kernel image contains a 64-byte header as follows:
u64 res3 = 0; /* reserved */
u64 res4 = 0; /* reserved */
u32 magic = 0x644d5241; /* Magic number, little endian, "ARM\x64" */
- u32 res5; /* reserved (used for PE COFF offset) */
+ u32 res5; /* reserved (used for PE COFF offset) */
Header notes:
@@ -103,7 +103,7 @@ Header notes:
- The flags field (introduced in v3.17) is a little-endian 64-bit field
composed as follows:
- Bit 0: Kernel endianness. 1 if BE, 0 if LE.
+ Bit 0: Kernel endianness. 1 if BE, 0 if LE.
Bits 1-63: Reserved.
- When image_size is zero, a bootloader should attempt to keep as much
@@ -115,11 +115,14 @@ The Image must be placed text_offset bytes from a 2MB aligned base
address near the start of usable system RAM and called there. Memory
below that base address is currently unusable by Linux, and therefore it
is strongly recommended that this location is the start of system RAM.
+The region between the 2 MB aligned base address and the start of the
+image has no special significance to the kernel, and may be used for
+other purposes.
At least image_size bytes from the start of the image must be free for
use by the kernel.
-Any memory described to the kernel (even that below the 2MB aligned base
-address) which is not marked as reserved from the kernel e.g. with a
+Any memory described to the kernel (even that below the start of the
+image) which is not marked as reserved from the kernel (e.g., with a
memreserve region in the device tree) will be considered as available to
the kernel.
diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
index dab6da3382d9..b19fc34efdb1 100644
--- a/Documentation/atomic_ops.txt
+++ b/Documentation/atomic_ops.txt
@@ -266,7 +266,9 @@ with the given old and new values. Like all atomic_xxx operations,
atomic_cmpxchg will only satisfy its atomicity semantics as long as all
other accesses of *v are performed through atomic_xxx operations.
-atomic_cmpxchg must provide explicit memory barriers around the operation.
+atomic_cmpxchg must provide explicit memory barriers around the operation,
+although if the comparison fails then no memory ordering guarantees are
+required.
The semantics for atomic_cmpxchg are the same as those defined for 'cas'
below.
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index fd12c0d835fd..5be8a7f4cc7f 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -1109,7 +1109,7 @@ it will loop and handle as many sectors (on a bio-segment granularity)
as specified.
Now bh->b_end_io is replaced by bio->bi_end_io, but most of the time the
-right thing to use is bio_endio(bio, uptodate) instead.
+right thing to use is bio_endio(bio) instead.
If the driver is dropping the io_request_lock from its request_fn strategy,
then it just needs to replace that with q->queue_lock instead.
diff --git a/Documentation/block/biovecs.txt b/Documentation/block/biovecs.txt
index 74a32ad52f53..25689584e6e0 100644
--- a/Documentation/block/biovecs.txt
+++ b/Documentation/block/biovecs.txt
@@ -24,7 +24,7 @@ particular, presenting the illusion of partially completed biovecs so that
normal code doesn't have to deal with bi_bvec_done.
* Driver code should no longer refer to biovecs directly; we now have
- bio_iovec() and bio_iovec_iter() macros that return literal struct biovecs,
+ bio_iovec() and bio_iter_iovec() macros that return literal struct biovecs,
constructed from the raw biovecs but taking into account bi_bvec_done and
bi_size.
@@ -109,3 +109,11 @@ Other implications:
over all the biovecs in the new bio - which is silly as it's not needed.
So, don't use bi_vcnt anymore.
+
+ * The current interface allows the block layer to split bios as needed, so we
+ could eliminate a lot of complexity particularly in stacked drivers. Code
+ that creates bios can then create whatever size bios are convenient, and
+ more importantly stacked drivers don't have to deal with both their own bio
+ size limitations and the limitations of the underlying devices. Thus
+ there's no need to define ->merge_bvec_fn() callbacks for individual block
+ drivers.
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
index 3a29f8914df9..e5d914845be6 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@@ -20,7 +20,7 @@ This shows the size of internal allocation of the device in bytes, if
reported by the device. A value of '0' means device does not support
the discard functionality.
-discard_max_bytes (RO)
+discard_max_hw_bytes (RO)
----------------------
Devices that support discard functionality may have internal limits on
the number of bytes that can be trimmed or unmapped in a single operation.
@@ -29,6 +29,14 @@ number of bytes that can be discarded in a single operation. Discard
requests issued to the device must not exceed this limit. A discard_max_bytes
value of 0 means that the device does not support discard functionality.
+discard_max_bytes (RW)
+----------------------
+While discard_max_hw_bytes is the hardware limit for the device, this
+setting is the software limit. Some devices exhibit large latencies when
+large discards are issued, setting this value lower will make Linux issue
+smaller discards and potentially help reduce latencies induced by large
+discard operations.
+
discard_zeroes_data (RO)
------------------------
When read, this file will show if the discarded block are zeroed by the
diff --git a/Documentation/cgroups/00-INDEX b/Documentation/cgroups/00-INDEX
index 96ce071a3633..3f5a40f57d4a 100644
--- a/Documentation/cgroups/00-INDEX
+++ b/Documentation/cgroups/00-INDEX
@@ -22,6 +22,8 @@ net_cls.txt
- Network classifier cgroups details and usages.
net_prio.txt
- Network priority cgroups details and usages.
+pids.txt
+ - Process number cgroups details and usages.
resource_counter.txt
- Resource Counter API.
unified-hierarchy.txt
diff --git a/Documentation/cgroups/pids.txt b/Documentation/cgroups/pids.txt
new file mode 100644
index 000000000000..1a078b5d281a
--- /dev/null
+++ b/Documentation/cgroups/pids.txt
@@ -0,0 +1,85 @@
+ Process Number Controller
+ =========================
+
+Abstract
+--------
+
+The process number controller is used to allow a cgroup hierarchy to stop any
+new tasks from being fork()'d or clone()'d after a certain limit is reached.
+
+Since it is trivial to hit the task limit without hitting any kmemcg limits in
+place, PIDs are a fundamental resource. As such, PID exhaustion must be
+preventable in the scope of a cgroup hierarchy by allowing resource limiting of
+the number of tasks in a cgroup.
+
+Usage
+-----
+
+In order to use the `pids` controller, set the maximum number of tasks in
+pids.max (this is not available in the root cgroup for obvious reasons). The
+number of processes currently in the cgroup is given by pids.current.
+
+Organisational operations are not blocked by cgroup policies, so it is possible
+to have pids.current > pids.max. This can be done by either setting the limit to
+be smaller than pids.current, or attaching enough processes to the cgroup such
+that pids.current > pids.max. However, it is not possible to violate a cgroup
+policy through fork() or clone(). fork() and clone() will return -EAGAIN if the
+creation of a new process would cause a cgroup policy to be violated.
+
+To set a cgroup to have no limit, set pids.max to "max". This is the default for
+all new cgroups (N.B. that PID limits are hierarchical, so the most stringent
+limit in the hierarchy is followed).
+
+pids.current tracks all child cgroup hierarchies, so parent/pids.current is a
+superset of parent/child/pids.current.
+
+Example
+-------
+
+First, we mount the pids controller:
+# mkdir -p /sys/fs/cgroup/pids
+# mount -t cgroup -o pids none /sys/fs/cgroup/pids
+
+Then we create a hierarchy, set limits and attach processes to it:
+# mkdir -p /sys/fs/cgroup/pids/parent/child
+# echo 2 > /sys/fs/cgroup/pids/parent/pids.max
+# echo $$ > /sys/fs/cgroup/pids/parent/cgroup.procs
+# cat /sys/fs/cgroup/pids/parent/pids.current
+2
+#
+
+It should be noted that attempts to overcome the set limit (2 in this case) will
+fail:
+
+# cat /sys/fs/cgroup/pids/parent/pids.current
+2
+# ( /bin/echo "Here's some processes for you." | cat )
+sh: fork: Resource temporary unavailable
+#
+
+Even if we migrate to a child cgroup (which doesn't have a set limit), we will
+not be able to overcome the most stringent limit in the hierarchy (in this case,
+parent's):
+
+# echo $$ > /sys/fs/cgroup/pids/parent/child/cgroup.procs
+# cat /sys/fs/cgroup/pids/parent/pids.current
+2
+# cat /sys/fs/cgroup/pids/parent/child/pids.current
+2
+# cat /sys/fs/cgroup/pids/parent/child/pids.max
+max
+# ( /bin/echo "Here's some processes for you." | cat )
+sh: fork: Resource temporary unavailable
+#
+
+We can set a limit that is smaller than pids.current, which will stop any new
+processes from being forked at all (note that the shell itself counts towards
+pids.current):
+
+# echo 1 > /sys/fs/cgroup/pids/parent/pids.max
+# /bin/echo "We can't even spawn a single process now."
+sh: fork: Resource temporary unavailable
+# echo 0 > /sys/fs/cgroup/pids/parent/pids.max
+# /bin/echo "We can't even spawn a single process now."
+sh: fork: Resource temporary unavailable
+#
diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt
index 86847a7647ab..1ee9caf29e57 100644
--- a/Documentation/cgroups/unified-hierarchy.txt
+++ b/Documentation/cgroups/unified-hierarchy.txt
@@ -23,10 +23,13 @@ CONTENTS
5. Other Changes
5-1. [Un]populated Notification
5-2. Other Core Changes
- 5-3. Per-Controller Changes
- 5-3-1. blkio
- 5-3-2. cpuset
- 5-3-3. memory
+ 5-3. Controller File Conventions
+ 5-3-1. Format
+ 5-3-2. Control Knobs
+ 5-4. Per-Controller Changes
+ 5-4-1. blkio
+ 5-4-2. cpuset
+ 5-4-3. memory
6. Planned Changes
6-1. CAP for resource control
@@ -372,14 +375,75 @@ supported and the interface files "release_agent" and
- The "cgroup.clone_children" file is removed.
-5-3. Per-Controller Changes
+5-3. Controller File Conventions
-5-3-1. blkio
+5-3-1. Format
+
+In general, all controller files should be in one of the following
+formats whenever possible.
+
+- Values only files
+
+ VAL0 VAL1...\n
+
+- Flat keyed files
+
+ KEY0 VAL0\n
+ KEY1 VAL1\n
+ ...
+
+- Nested keyed files
+
+ KEY0 SUB_KEY0=VAL00 SUB_KEY1=VAL01...
+ KEY1 SUB_KEY0=VAL10 SUB_KEY1=VAL11...
+ ...
+
+For a writeable file, the format for writing should generally match
+reading; however, controllers may allow omitting later fields or
+implement restricted shortcuts for most common use cases.
+
+For both flat and nested keyed files, only the values for a single key
+can be written at a time. For nested keyed files, the sub key pairs
+may be specified in any order and not all pairs have to be specified.
+
+
+5-3-2. Control Knobs
+
+- Settings for a single feature should generally be implemented in a
+ single file.
+
+- In general, the root cgroup should be exempt from resource control
+ and thus shouldn't have resource control knobs.
+
+- If a controller implements ratio based resource distribution, the
+ control knob should be named "weight" and have the range [1, 10000]
+ and 100 should be the default value. The values are chosen to allow
+ enough and symmetric bias in both directions while keeping it
+ intuitive (the default is 100%).
+
+- If a controller implements an absolute resource guarantee and/or
+ limit, the control knobs should be named "min" and "max"
+ respectively. If a controller implements best effort resource
+ gurantee and/or limit, the control knobs should be named "low" and
+ "high" respectively.
+
+ In the above four control files, the special token "max" should be
+ used to represent upward infinity for both reading and writing.
+
+- If a setting has configurable default value and specific overrides,
+ the default settings should be keyed with "default" and appear as
+ the first entry in the file. Specific entries can use "default" as
+ its value to indicate inheritance of the default value.
+
+
+5-4. Per-Controller Changes
+
+5-4-1. blkio
- blk-throttle becomes properly hierarchical.
-5-3-2. cpuset
+5-4-2. cpuset
- Tasks are kept in empty cpusets after hotplug and take on the masks
of the nearest non-empty ancestor, instead of being moved to it.
@@ -388,7 +452,7 @@ supported and the interface files "release_agent" and
masks of the nearest non-empty ancestor.
-5-3-3. memory
+5-4-3. memory
- use_hierarchy is on by default and the cgroup file for the flag is
not created.
diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index f463bdc37f88..5c4bc4d01d0c 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -71,12 +71,8 @@ the operations defined in clk.h:
long (*round_rate)(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate);
- long (*determine_rate)(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
+ int (*determine_rate)(struct clk_hw *hw,
+ struct clk_rate_request *req);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw,
diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
index 70933eadc308..ba78e7c2a069 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.txt
@@ -55,16 +55,13 @@ transition notifiers.
----------------------------
These are notified when a new policy is intended to be set. Each
-CPUFreq policy notifier is called three times for a policy transition:
+CPUFreq policy notifier is called twice for a policy transition:
1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
they see a need for this - may it be thermal considerations or
hardware limitations.
-2.) During CPUFREQ_INCOMPATIBLE only changes may be done in order to avoid
- hardware failure.
-
-3.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
+2.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
- if two hardware drivers failed to agree on a new policy before this
stage, the incompatible hardware shall be shut down, and the user
informed of this.
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index cb12af3b51c2..df2d636b6088 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -209,6 +209,37 @@ include:
"repair" - Initiate a repair of the array.
"reshape"- Currently unsupported (-EINVAL).
+
+Discard Support
+---------------
+The implementation of discard support among hardware vendors varies.
+When a block is discarded, some storage devices will return zeroes when
+the block is read. These devices set the 'discard_zeroes_data'
+attribute. Other devices will return random data. Confusingly, some
+devices that advertise 'discard_zeroes_data' will not reliably return
+zeroes when discarded blocks are read! Since RAID 4/5/6 uses blocks
+from a number of devices to calculate parity blocks and (for performance
+reasons) relies on 'discard_zeroes_data' being reliable, it is important
+that the devices be consistent. Blocks may be discarded in the middle
+of a RAID 4/5/6 stripe and if subsequent read results are not
+consistent, the parity blocks may be calculated differently at any time;
+making the parity blocks useless for redundancy. It is important to
+understand how your hardware behaves with discards if you are going to
+enable discards with RAID 4/5/6.
+
+Since the behavior of storage devices is unreliable in this respect,
+even when reporting 'discard_zeroes_data', by default RAID 4/5/6
+discard support is disabled -- this ensures data integrity at the
+expense of losing some performance.
+
+Storage devices that properly support 'discard_zeroes_data' are
+increasingly whitelisted in the kernel and can thus be trusted.
+
+For trusted devices, the following dm-raid module parameter can be set
+to safely enable discard support for RAID 4/5/6:
+ 'devices_handle_discards_safely'
+
+
Version History
---------------
1.0.0 Initial version. Support for RAID 4/5/6
diff --git a/Documentation/device-mapper/statistics.txt b/Documentation/device-mapper/statistics.txt
index 4919b2dfd1b3..6f5ef944ca4c 100644
--- a/Documentation/device-mapper/statistics.txt
+++ b/Documentation/device-mapper/statistics.txt
@@ -121,6 +121,10 @@ Messages
Output format:
<region_id>: <start_sector>+<length> <step> <program_id> <aux_data>
+ precise_timestamps histogram:n1,n2,n3,...
+
+ The strings "precise_timestamps" and "histogram" are printed only
+ if they were specified when creating the region.
@stats_print <region_id> [<starting_line> <number_of_lines>]
diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt
new file mode 100644
index 000000000000..1ae98b87c640
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/archs-pct.txt
@@ -0,0 +1,17 @@
+* ARC HS Performance Counters
+
+The ARC HS can be configured with a pipeline performance monitor for counting
+CPU and cache events like cache misses and hits. Like conventional PCT there
+are 100+ hardware conditions dynamically mapped to upto 32 counters.
+It also supports overflow interrupts.
+
+Required properties:
+
+- compatible : should contain
+ "snps,archs-pct"
+
+Example:
+
+pmu {
+ compatible = "snps,archs-pct";
+};
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 424ac8cbfa08..7fd64ec9ee1d 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -27,6 +27,8 @@ compatible: must be one of:
o "atmel,at91sam9xe"
* "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
SoC family:
+ o "atmel,sama5d2" shall be extended with the specific SoC compatible:
+ - "atmel,sama5d27"
o "atmel,sama5d3" shall be extended with the specific SoC compatible:
- "atmel,sama5d31"
- "atmel,sama5d33"
@@ -50,6 +52,7 @@ System Timer (ST) required properties:
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the ST which is the IRQ line
shared across all System Controller members.
+- clocks: phandle to input clock.
Its subnodes can be:
- watchdog: compatible should be "atmel,at91rm9200-wdt"
@@ -61,7 +64,7 @@ TC/TCLIB Timer required properties:
Note that you can specify several interrupt cells if the TC
block has one interrupt per channel.
- clock-names: tuple listing input clock names.
- Required elements: "t0_clk"
+ Required elements: "t0_clk", "slow_clk"
Optional elements: "t1_clk", "t2_clk"
- clocks: phandles to input clocks.
@@ -87,14 +90,16 @@ One interrupt per TC channel in a TC block:
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
- <chip> can be "at91sam9260" or "at91sam9g45"
+ <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
- reg: Should contain registers location and length
+- clocks: phandle to input clock.
Example:
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
};
RAMC SDRAM/DDR Controller required properties:
@@ -117,6 +122,7 @@ required properties:
- compatible: Should be "atmel,<chip>-shdwc".
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
- reg: Should contain registers location and length
+- clocks: phandle to input clock.
optional properties:
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
@@ -135,9 +141,10 @@ optional at91sam9x5 properties:
Example:
- rstc@fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
};
Special Function Registers (SFR)
diff --git a/Documentation/devicetree/bindings/arm/bcm/ns2.txt b/Documentation/devicetree/bindings/arm/bcm/ns2.txt
new file mode 100644
index 000000000000..35f056f4a1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/ns2.txt
@@ -0,0 +1,9 @@
+Broadcom North Star 2 (NS2) device tree bindings
+------------------------------------------------
+
+Boards with NS2 shall have the following properties:
+
+Required root node property:
+
+NS2 SVK board
+compatible = "brcm,ns2-svk", "brcm,ns2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
new file mode 100644
index 000000000000..6824b3180ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
@@ -0,0 +1,14 @@
+Raspberry Pi VideoCore firmware driver
+
+Required properties:
+
+- compatible: Should be "raspberrypi,bcm2835-firmware"
+- mboxes: Phandle to the firmware device's Mailbox.
+ (See: ../mailbox/mailbox.txt for more information)
+
+Example:
+
+firmware {
+ compatible = "raspberrypi,bcm2835-firmware";
+ mboxes = <&mailbox>;
+};
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 65a6db2271a2..62938eb9697f 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -17,6 +17,7 @@ its hardware characteristcs.
- "arm,coresight-tmc", "arm,primecell";
- "arm,coresight-funnel", "arm,primecell";
- "arm,coresight-etm3x", "arm,primecell";
+ - "arm,coresight-etm4x", "arm,primecell";
- "qcom,coresight-replicator1x", "arm,primecell";
* reg: physical base address and length of the register
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index d6b794cef0b8..91e6e5c478d0 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -199,6 +199,7 @@ nodes to be present and contain the properties described below.
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
"rockchip,rk3066-smp"
+ "ste,dbx500-smp"
- cpu-release-addr
Usage: required for systems that have an "enable-method"
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index c431c67524d6..c733e28e18e5 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -127,6 +127,24 @@ Example:
#clock-cells = <1>;
};
+
+Hisilicon Hi6220 SRAM controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-sramctrl", "syscon"
+- reg : Register address and size
+
+Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
+SRAM banks for power management, modem, security, etc. Further, use "syscon"
+managing the common sram which can be shared by multiple modules.
+
+Example:
+ /*for Hi6220*/
+ sram: sram@fff80000 {
+ compatible = "hisilicon,hi6220-sramctrl", "syscon";
+ reg = <0x0 0xfff80000 0x0 0x12000>;
+ };
+
-----------------------------------------------------------------------
Hisilicon HiP01 system controller
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 2251dccb141e..06c88a4d28ac 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -67,6 +67,12 @@ Optional properties:
disable if zero.
- arm,prefetch-offset : Override prefetch offset value. Valid values are
0-7, 15, 23, and 31.
+- arm,shared-override : The default behavior of the pl310 cache controller with
+ respect to the shareable attribute is to transform "normal memory
+ non-cacheable transactions" into "cacheable no allocate" (for reads) or
+ "write through no write allocate" (for writes).
+ On systems where this may cause DMA buffer corruption, this property must be
+ specified to indicate that such transforms are precluded.
- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
(forcibly enable), property absent (retain settings set by firmware)
- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 4f40ff3fee4b..5171ad8f48ff 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific
board. Currently known boards are:
"buffalo,lschlv2"
+"buffalo,lswvl"
+"buffalo,lswxl"
"buffalo,lsxhl"
"buffalo,lsxl"
"dlink,dns-320"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index dd7550a29db6..618a91994a18 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -1,12 +1,15 @@
-MediaTek mt65xx & mt81xx Platforms Device Tree Bindings
+MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings
-Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
+Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the
+following property:
Required root node property:
compatible: Must contain one of
+ "mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
+ "mediatek,mt6795"
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
@@ -14,12 +17,18 @@ compatible: Must contain one of
Supported boards:
+- Evaluation board for MT6580:
+ Required root node properties:
+ - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
- bq Aquaris5 smart phone:
Required root node properties:
- compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
- Evaluation board for MT6592:
Required root node properties:
- compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+- Evaluation board for MT6795(Helio X10):
+ Required root node properties:
+ - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
index 4f5a5352ccd8..afef6a85ac51 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
@@ -1,4 +1,4 @@
-Mediatek 65xx/81xx sysirq
++Mediatek 65xx/67xx/81xx sysirq
Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
interrupt.
@@ -8,9 +8,11 @@ Required properties:
"mediatek,mt8173-sysirq"
"mediatek,mt8135-sysirq"
"mediatek,mt8127-sysirq"
+ "mediatek,mt6795-sysirq"
"mediatek,mt6592-sysirq"
"mediatek,mt6589-sysirq"
"mediatek,mt6582-sysirq"
+ "mediatek,mt6580-sysirq"
"mediatek,mt6577-sysirq"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 4f6a82cef1d1..9f4e5136e568 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -135,6 +135,9 @@ Boards:
- AM335X OrionLXm : Substation Automation Platform
compatible = "novatech,am335x-lxm", "ti,am33xx"
+- AM335X phyBOARD-WEGA: Single Board Computer dev kit
+ compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
index 3b5f5d1088c6..435251fa9ce0 100644
--- a/Documentation/devicetree/bindings/arm/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -26,13 +26,19 @@ Required properties:
Optional properties:
-- interrupt-affinity : Valid only when using SPIs, specifies a list of phandles
- to CPU nodes corresponding directly to the affinity of
+- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU
+ nodes corresponding directly to the affinity of
the SPIs listed in the interrupts property.
- This property should be present when there is more than
+ When using a PPI, specifies a list of phandles to CPU
+ nodes corresponding to the set of CPUs which have
+ a PMU of this type signalling the PPI listed in the
+ interrupts property.
+
+ This property should be present when there is more than
a single SPI.
+
- qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd
events.
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 60d4a1e0a9b5..af58cd74aeff 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -26,3 +26,38 @@ Rockchip platforms device tree bindings
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+- Netxeon R89 board:
+ Required root node properties:
+ - compatible = "netxeon,r89", "rockchip,rk3288";
+
+- Google Jerry (Hisense Chromebook C11 and more):
+ Required root node properties:
+ - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+ "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+ "google,veyron-jerry-rev3", "google,veyron-jerry",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Minnie (Asus Chromebook Flip C100P):
+ Required root node properties:
+ - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+ "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+ "google,veyron-minnie-rev0", "google,veyron-minnie",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Pinky (dev-board):
+ Required root node properties:
+ - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Speedy (Asus C201 Chromebook):
+ Required root node properties:
+ - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+ "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+ "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+ "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+ "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+- Rockchip R88 board:
+ Required root node properties:
+ - compatible = "rockchip,r88", "rockchip,rk3368";
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
new file mode 100644
index 000000000000..6808fb5dee40
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.txt
@@ -0,0 +1,46 @@
+SP810 System Controller
+-----------------------
+
+Required properties:
+
+- compatible: standard compatible string for a Primecell peripheral,
+ see Documentation/devicetree/bindings/arm/primecell.txt
+ for more details
+ should be: "arm,sp810", "arm,primecell"
+
+- reg: standard registers property, physical address and size
+ of the control registers
+
+- clock-names: from the common clock bindings, for more details see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt;
+ should be: "refclk", "timclk", "apb_pclk"
+
+- clocks: from the common clock bindings, phandle and clock
+ specifier pairs for the entries of clock-names property
+
+- #clock-cells: from the common clock bindings;
+ should be: <1>
+
+- clock-output-names: from the common clock bindings;
+ should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
+
+- assigned-clocks: from the common clock binding;
+ should be: clock specifier for each output clock of this
+ provider node
+
+- assigned-clock-parents: from the common clock binding;
+ should be: phandle of input clock listed in clocks
+ property with the highest frequency
+
+Example:
+ v2m_sysctl: sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+
+ };
diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt
new file mode 100644
index 000000000000..2be1e038ca62
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt
@@ -0,0 +1,19 @@
+Binding for simple gpio clock multiplexer.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-mux-clock".
+- clocks: list of two references to parent clocks.
+- #clock-cells : from common clock binding; shall be set to 0.
+- select-gpios : GPIO reference for selecting the parent clock.
+
+Example:
+ clock {
+ compatible = "gpio-mux-clock";
+ clocks = <&parentclk1>, <&parentclk2>;
+ #clock-cells = <0>;
+ select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
index 259e30af9597..e4d5feaebc29 100644
--- a/Documentation/devicetree/bindings/clock/hi6220-clock.txt
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -15,19 +15,36 @@ Required Properties:
- "hisilicon,hi6220-sysctrl"
- "hisilicon,hi6220-mediactrl"
- "hisilicon,hi6220-pmctrl"
+ - "hisilicon,hi6220-stub-clk"
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
-For example:
+Optional Properties:
+
+- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram;
+ the driver need use the sram to pass parameters for frequency change.
+
+- mboxes: use the label reference for the mailbox as the first parameter, the
+ second parameter is the channel number.
+
+Example 1:
sys_ctrl: sys_ctrl@f7030000 {
compatible = "hisilicon,hi6220-sysctrl", "syscon";
reg = <0x0 0xf7030000 0x0 0x2000>;
#clock-cells = <1>;
};
+Example 2:
+ stub_clock: stub_clock {
+ compatible = "hisilicon,hi6220-stub-clk";
+ hisilicon,hi6220-clk-sram = <&sram>;
+ #clock-cells = <1>;
+ mboxes = <&mailbox 1>;
+ };
+
Each clock is assigned an identifier and client nodes use this identifier
to specify the clock which they consume.
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
new file mode 100644
index 000000000000..571d5039f663
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 UltraLite
+
+Required properties:
+- compatible: Should be "fsl,imx6ul-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h
+for the full list of i.MX6 UltraLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
new file mode 100644
index 000000000000..52b457c23eed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
@@ -0,0 +1,83 @@
+Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+ "cpu" - The multiplexer for clock input of CPU cluster.
+ "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
+ source (usually MAINPLL) when the original CPU PLL is under
+ transition and not stable yet.
+ Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+ generic clock consumer properties.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+ needs to do "voltage tracking" to step by step scale up/down Vproc and
+ Vsram to fit SoC specific needs. When absent, the voltage scaling
+ flow is handled by hardware, hence no software "voltage tracking" is
+ needed.
+
+Example:
+--------
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA53SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA53SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ &cpu0 {
+ proc-supply = <&mt6397_vpca15_reg>;
+ };
+
+ &cpu1 {
+ proc-supply = <&mt6397_vpca15_reg>;
+ };
+
+ &cpu2 {
+ proc-supply = <&da9211_vcpu_reg>;
+ sram-supply = <&mt6397_vsramca7_reg>;
+ };
+
+ &cpu3 {
+ proc-supply = <&da9211_vcpu_reg>;
+ sram-supply = <&mt6397_vsramca7_reg>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
new file mode 100644
index 000000000000..ee7e5fd4a50b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -0,0 +1,79 @@
+NVIDIA Tegra124 DFLL FCPU clocksource
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The DFLL IP block on Tegra is a root clocksource designed for clocking
+the fast CPU cluster. It consists of a free-running voltage controlled
+oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
+control module that will automatically adjust the VDD_CPU voltage by
+communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
+Currently only the I2C mode is supported by these bindings.
+
+Required properties:
+- compatible : should be "nvidia,tegra124-dfll"
+- reg : Defines the following set of registers, in the order listed:
+ - registers for the DFLL control logic.
+ - registers for the I2C output logic.
+ - registers for the integrated I2C master controller.
+ - look-up table RAM for voltage register values.
+- interrupts: Should contain the DFLL block interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+ See clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - soc: Clock source for the DFLL control logic.
+ - ref: The closed loop reference clock
+ - i2c: Clock source for the integrated I2C master.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - dvco: Reset control for the DFLL DVCO.
+- #clock-cells: Must be 0.
+- clock-output-names: Name of the clock output.
+- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
+ hardware will start controlling. The regulator will be queried for
+ the I2C register, control values and supported voltages.
+
+Required properties for the control loop parameters:
+- nvidia,sample-rate: Sample rate of the DFLL control loop.
+- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
+- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
+- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
+- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
+- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
+
+Optional properties for the control loop parameters:
+- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
+
+Required properties for I2C mode:
+- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
+
+Example:
+
+clock@0,70110000 {
+ compatible = "nvidia,tegra124-dfll";
+ reg = <0 0x70110000 0 0x100>, /* DFLL control */
+ <0 0x70110000 0 0x100>, /* I2C output control */
+ <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+ <0 0x70110200 0 0x100>; /* Look-up table RAM */
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+ <&tegra_car TEGRA124_CLK_DFLL_REF>,
+ <&tegra_car TEGRA124_CLK_I2C5>;
+ clock-names = "soc", "ref", "i2c";
+ resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+ reset-names = "dvco";
+ #clock-cells = <0>;
+ clock-output-names = "dfllCPU_out";
+ vdd-cpu-supply = <&vdd_cpu>;
+ status = "okay";
+
+ nvidia,sample-rate = <12500>;
+ nvidia,droop-ctrl = <0x00000f00>;
+ nvidia,force-mode = <1>;
+ nvidia,cf = <10>;
+ nvidia,ci = <0>;
+ nvidia,cg = <2>;
+
+ nvidia,i2c-fs-rate = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
index 2f3747fdcf1c..e4cdaf1cb333 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
@@ -1,7 +1,9 @@
* Renesas R8A7778 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7778. It includes two PLLs and
-several fixed ratio dividers
+several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -10,10 +12,18 @@ Required Properties:
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are
"plla", "pllb", "b", "out", "p", "s", and "s1".
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7778-cpg-clocks";
@@ -22,4 +32,17 @@ Example
clocks = <&extal_clk>;
clock-output-names = "plla", "pllb", "b",
"out", "p", "s", "s1";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSTP Clock Domain member device node:
+
+ sdhi0: sd@ffe4c000 {
+ compatible = "renesas,sdhi-r8a7778";
+ reg = <0xffe4c000 0x100>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
index ed3c8cb12f4e..8c81547c29f5 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
@@ -1,7 +1,9 @@
* Renesas R8A7779 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7779. It includes one PLL and
-several fixed ratio dividers
+several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -12,16 +14,36 @@ Required Properties:
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "plla",
"z", "zs", "s", "s1", "p", "b", "out".
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7779-cpg-clocks";
- reg = <0 0xffc80000 0 0x30>;
+ reg = <0xffc80000 0x30>;
clocks = <&extal_clk>;
#clock-cells = <1>;
clock-output-names = "plla", "z", "zs", "s", "s1", "p",
"b", "out";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSTP Clock Domain member device node:
+
+ sata: sata@fc600000 {
+ compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
+ reg = <0xfc600000 0x2000>;
+ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+ power-domains = <&cpg_clocks>;
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
index 56f111bd3e45..2a9a8edc8f35 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -2,6 +2,8 @@
The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
and several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -20,10 +22,18 @@ Required Properties:
- clock-output-names: The names of the clocks. Supported clocks are "main",
"pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
"adsp"
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7790-cpg-clocks",
@@ -34,4 +44,16 @@ Example
clock-output-names = "main", "pll0, "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "sd1", "z",
"rcan", "adsp";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSTP Clock Domain member device node:
+
+ thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
index b0f7ddb8cdb1..bb51a33a1fbf 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
@@ -2,6 +2,8 @@
The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable
CPU and GPU clocks, and several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -14,10 +16,18 @@ Required Properties:
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "pll",
"i", and "g"
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@fcfe0000 {
#clock-cells = <1>;
@@ -26,4 +36,19 @@ Example
reg = <0xfcfe0000 0x18>;
clocks = <&extal_clk>, <&usb_x1_clk>;
clock-output-names = "pll", "i", "g";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSTP Clock Domain member device node:
+
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
new file mode 100644
index 000000000000..7c8bbcfed8d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3368 Clock and Reset Unit
+
+The RK3368 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3368-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+ - "ext_vip" - external VIP clock - optional,
+ - "usbotg_out" - output clock of the pll in the otg phy
+
+Example: Clock controller node:
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3368-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index efb51cf0c845..d8b168ebd5f1 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -21,8 +21,8 @@ Required properties:
"st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"
"st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
"st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
- "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"
- "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"
+ "sst,plls-c32-cx_0", "st,clkgen-plls-c32"
+ "sst,plls-c32-cx_1", "st,clkgen-plls-c32"
"st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
"st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"
diff --git a/Documentation/devicetree/bindings/clock/ux500.txt b/Documentation/devicetree/bindings/clock/ux500.txt
new file mode 100644
index 000000000000..e52bd4b72348
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ux500.txt
@@ -0,0 +1,64 @@
+Clock bindings for ST-Ericsson Ux500 clocks
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "stericsson,u8500-clks"
+ "stericsson,u8540-clks"
+ "stericsson,u9540-clks"
+- reg : shall contain base register location and length for
+ CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
+ CLKRST4, which does not exist.
+
+Required subnodes:
+- prcmu-clock: a subnode with one clock cell for PRCMU (power,
+ reset, control unit) clocks. The cell indicates which PRCMU
+ clock in the prcmu-clock node the consumer wants to use.
+- prcc-periph-clock: a subnode with two clock cells for
+ PRCC (programmable reset- and clock controller) peripheral clocks.
+ The first cell indicates which PRCC block the consumer
+ wants to use, possible values are 1, 2, 3, 5, 6. The second
+ cell indicates which clock inside the PRCC block it wants,
+ possible values are 0 thru 31.
+- prcc-kernel-clock: a subnode with two clock cells for
+ PRCC (programmable reset- and clock controller) kernel clocks
+ The first cell indicates which PRCC block the consumer
+ wants to use, possible values are 1, 2, 3, 5, 6. The second
+ cell indicates which clock inside the PRCC block it wants,
+ possible values are 0 thru 31.
+- rtc32k-clock: a subnode with zero clock cells for the 32kHz
+ RTC clock.
+- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
+ with zero clock cells.
+
+Example:
+
+clocks {
+ compatible = "stericsson,u8500-clks";
+ /*
+ * Registers for the CLKRST block on peripheral
+ * groups 1, 2, 3, 5, 6,
+ */
+ reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+ <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+ <0xa03cf000 0x1000>;
+
+ prcmu_clk: prcmu-clock {
+ #clock-cells = <1>;
+ };
+
+ prcc_pclk: prcc-periph-clock {
+ #clock-cells = <2>;
+ };
+
+ prcc_kclk: prcc-kernel-clock {
+ #clock-cells = <2>;
+ };
+
+ rtc_clk: rtc32k-clock {
+ #clock-cells = <0>;
+ };
+
+ smp_twd_clk: smp-twd-clock {
+ #clock-cells = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt
new file mode 100644
index 000000000000..b1669fbfb740
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt
@@ -0,0 +1,44 @@
+Tegra124 CPU frequency scaling driver bindings
+----------------------------------------------
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - cpu_g: Clock mux for the fast CPU cluster.
+ - cpu_lp: Clock mux for the low-power CPU cluster.
+ - pll_x: Fast PLL clocksource.
+ - pll_p: Auxiliary PLL used during fast PLL rate changes.
+ - dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
+- vdd-cpu-supply: Regulator for CPU voltage
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+ in unit of nanoseconds.
+
+Example:
+--------
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+
+ clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+ <&tegra_car TEGRA124_CLK_CCLK_LP>,
+ <&tegra_car TEGRA124_CLK_PLL_X>,
+ <&tegra_car TEGRA124_CLK_PLL_P>,
+ <&dfll>;
+ clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+ clock-latency = <300000>;
+ vdd-cpu-supply: <&vdd_cpu>;
+ };
+
+ <...>
+};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index e4022776ac6e..6831d025ec24 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -106,6 +106,18 @@ PROPERTIES
to the interrupt parent to which the child domain
is being mapped.
+ - clocks
+ Usage: required if SEC 4.0 requires explicit enablement of clocks
+ Value type: <prop_encoded-array>
+ Definition: A list of phandle and clock specifier pairs describing
+ the clocks required for enabling and disabling SEC 4.0.
+
+ - clock-names
+ Usage: required if SEC 4.0 requires explicit enablement of clocks
+ Value type: <string>
+ Definition: A list of clock name strings in the same order as the
+ clocks property.
+
Note: All other standard properties (see the ePAPR) are allowed
but are optional.
@@ -120,6 +132,11 @@ EXAMPLE
ranges = <0 0x300000 0x10000>;
interrupt-parent = <&mpic>;
interrupts = <92 2>;
+ clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
+ <&clks IMX6QDL_CLK_CAAM_ACLK>,
+ <&clks IMX6QDL_CLK_CAAM_IPG>,
+ <&clks IMX6QDL_CLK_EIM_SLOW>;
+ clock-names = "mem", "aclk", "ipg", "emi_slow";
};
=====================================================================
@@ -288,12 +305,13 @@ Secure Non-Volatile Storage (SNVS) Node
Node defines address range and the associated
interrupt for the SNVS function. This function
monitors security state information & reports
- security violations.
+ security violations. This also included rtc,
+ system power off and ON/OFF key.
- compatible
Usage: required
Value type: <string>
- Definition: Must include "fsl,sec-v4.0-mon".
+ Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
- reg
Usage: required
@@ -324,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node
the child address, parent address, & length.
- interrupts
- Usage: required
+ Usage: optional
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this
device. The value of the interrupts property
@@ -341,7 +359,7 @@ Secure Non-Volatile Storage (SNVS) Node
EXAMPLE
sec_mon@314000 {
- compatible = "fsl,sec-v4.0-mon";
+ compatible = "fsl,sec-v4.0-mon", "syscon";
reg = <0x314000 0x1000>;
ranges = <0 0x314000 0x1000>;
interrupt-parent = <&mpic>;
@@ -358,16 +376,72 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
Value type: <string>
Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
- - reg
+ - interrupts
Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical
- address and length of the SNVS LP configuration registers.
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+ - regmap
+ Usage: required
+ Value type: <phandle>
+ Definition: this is phandle to the register map node.
+
+ - offset
+ Usage: option
+ value type: <u32>
+ Definition: LP register offset. default it is 0x34.
EXAMPLE
- sec_mon_rtc_lp@314000 {
+ sec_mon_rtc_lp@1 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ interrupts = <93 2>;
+ regmap = <&snvs>;
+ offset = <0x34>;
+ };
+
+=====================================================================
+System ON/OFF key driver
+
+ The snvs-pwrkey is designed to enable POWER key function which controlled
+ by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+ system if pressed after system suspend.
+
+ - compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+ - interrupts:
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+ - linux,keycode:
+ Usage: option
+ Value type: <int>
+ Definition: Keycode to emit, KEY_POWER by default.
+
+ - wakeup-source:
+ Usage: option
+ Value type: <boo>
+ Definition: Button can wake-up the system.
+
+ - regmap:
+ Usage: required:
+ Value type: <phandle>
+ Definition: this is phandle to the register map node.
+
+EXAMPLE:
+ snvs-pwrkey@0x020cc000 {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <0 4 0x4>
+ linux,keycode = <116>; /* KEY_POWER */
+ wakeup;
};
=====================================================================
@@ -443,12 +517,20 @@ FULL EXAMPLE
compatible = "fsl,sec-v4.0-mon";
reg = <0x314000 0x1000>;
ranges = <0 0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2>;
sec_mon_rtc_lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ regmap = <&sec_mon>;
+ offset = <0x34>;
+ interrupts = <93 2>;
+ };
+
+ snvs-pwrkey@0x020cc000 {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&sec_mon>;
+ interrupts = <0 4 0x4>;
+ linux,keycode = <116>; /* KEY_POWER */
+ wakeup;
};
};
diff --git a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt
new file mode 100644
index 000000000000..5d38e9b7033f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt
@@ -0,0 +1,23 @@
+* Allwinner Security System found on A20 SoC
+
+Required properties:
+- compatible : Should be "allwinner,sun4i-a10-crypto".
+- reg: Should contain the Security System register location and length.
+- interrupts: Should contain the IRQ line for the Security System.
+- clocks : List of clock specifiers, corresponding to ahb and ss.
+- clock-names : Name of the functional clock, should be
+ * "ahb" : AHB gating clock
+ * "mod" : SS controller clock
+
+Optional properties:
+ - resets : phandle + reset specifier pair
+ - reset-names : must contain "ahb"
+
+Example:
+ crypto: crypto-engine@01c15000 {
+ compatible = "allwinner,sun4i-a10-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb_gates 5>, <&ss_clk>;
+ clock-names = "ahb", "mod";
+ };
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
index b54bf3a2ff57..3e36c1d11386 100644
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
@@ -11,15 +11,14 @@ to various devfreq devices. The devfreq devices would use the event data when
derterming the current state of each IP.
Required properties:
-- compatible: Should be "samsung,exynos-ppmu".
+- compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2.
- reg: physical base address of each PPMU and length of memory mapped region.
Optional properties:
- clock-names : the name of clock used by the PPMU, "ppmu"
- clocks : phandles for clock specified in "clock-names" property
-- #clock-cells: should be 1.
-Example1 : PPMU nodes in exynos3250.dtsi are listed below.
+Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below.
ppmu_dmc0: ppmu_dmc0@106a0000 {
compatible = "samsung,exynos-ppmu";
@@ -108,3 +107,41 @@ Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
};
};
};
+
+Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below.
+
+ ppmu_d0_cpu: ppmu_d0_cpu@10480000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x10480000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d0_general: ppmu_d0_general@10490000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x10490000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d0_rt: ppmu_d0_rt@104a0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104a0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_cpu: ppmu_d1_cpu@104b0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104b0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_general: ppmu_d1_general@104c0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104c0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_rt: ppmu_d1_rt@104d0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104d0000 0x2000>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
new file mode 100644
index 000000000000..47cb1d14b690
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
@@ -0,0 +1,61 @@
+Analog Device AXI-DMAC DMA controller
+
+Required properties:
+ - compatible: Must be "adi,axi-dmac-1.00.a".
+ - reg: Specification for the controllers memory mapped register map.
+ - interrupts: Specification for the controllers interrupt.
+ - clocks: Phandle and specifier to the controllers AXI interface clock
+ - #dma-cells: Must be 1.
+
+Required sub-nodes:
+ - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
+ the channel sub-nodes the following bindings apply. They must match the
+ configuration options of the peripheral as it was instantiated.
+
+Required properties for adi,channels sub-node:
+ - #size-cells: Must be 0
+ - #address-cells: Must be 1
+
+Required channel sub-node properties:
+ - reg: Which channel this node refers to.
+ - adi,length-width: Width of the DMA transfer length register.
+ - adi,source-bus-width,
+ adi,destination-bus-width: Width of the source or destination bus in bits.
+ - adi,source-bus-type,
+ adi,destination-bus-type: Type of the source or destination bus. Must be one
+ of the following:
+ 0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface
+ 1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface
+ 2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface
+
+Optional channel properties:
+ - adi,cyclic: Must be set if the channel supports hardware cyclic DMA
+ transfers.
+ - adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
+
+DMA clients connected to the AXI-DMAC DMA controller must use the format
+described in the dma.txt file using a one-cell specifier. The value of the
+specifier refers to the DMA channel index.
+
+Example:
+
+dma: dma@7c420000 {
+ compatible = "adi,axi-dmac-1.00.a";
+ reg = <0x7c420000 0x10000>;
+ interrupts = <0 57 0>;
+ clocks = <&clkc 16>;
+ #dma-cells = <1>;
+
+ adi,channels {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ dma-channel@0 {
+ reg = <0>;
+ adi,source-bus-width = <32>;
+ adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>;
+ adi,destination-bus-width = <64>;
+ adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.txt b/Documentation/devicetree/bindings/dma/arm-pl08x.txt
new file mode 100644
index 000000000000..8a0097a029d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.txt
@@ -0,0 +1,54 @@
+* ARM PrimeCells PL080 and PL081 and derivatives DMA controller
+
+Required properties:
+- compatible: "arm,pl080", "arm,primecell";
+ "arm,pl081", "arm,primecell";
+- reg: Address range of the PL08x registers
+- interrupt: The PL08x interrupt number
+- clocks: The clock running the IP core clock
+- clock-names: Must contain "apb_pclk"
+- lli-bus-interface-ahb1: if AHB master 1 is eligible for fetching LLIs
+- lli-bus-interface-ahb2: if AHB master 2 is eligible for fetching LLIs
+- mem-bus-interface-ahb1: if AHB master 1 is eligible for fetching memory contents
+- mem-bus-interface-ahb2: if AHB master 2 is eligible for fetching memory contents
+- #dma-cells: must be <2>. First cell should contain the DMA request,
+ second cell should contain either 1 or 2 depending on
+ which AHB master that is used.
+
+Optional properties:
+- dma-channels: contains the total number of DMA channels supported by the DMAC
+- dma-requests: contains the total number of DMA requests supported by the DMAC
+- memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32
+ 64, 128 or 256 bytes are legal values
+- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal
+ values
+
+Clients
+Required properties:
+- dmas: List of DMA controller phandle, request channel and AHB master id
+- dma-names: Names of the aforementioned requested channels
+
+Example:
+
+dmac0: dma-controller@10130000 {
+ compatible = "arm,pl080", "arm,primecell";
+ reg = <0x10130000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <15>;
+ clocks = <&hclkdma0>;
+ clock-names = "apb_pclk";
+ lli-bus-interface-ahb1;
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ #dma-cells = <2>;
+};
+
+device@40008000 {
+ ...
+ dmas = <&dmac0 0 2
+ &dmac0 1 2>;
+ dma-names = "tx", "rx";
+ ...
+};
diff --git a/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt b/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
new file mode 100644
index 000000000000..87740adb2995
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
@@ -0,0 +1,54 @@
+NXP LPC18xx/43xx DMA MUX (DMA request router)
+
+Required properties:
+- compatible: "nxp,lpc1850-dmamux"
+- reg: Memory map for accessing module
+- #dma-cells: Should be set to <3>.
+ * 1st cell contain the master dma request signal
+ * 2nd cell contain the mux value (0-3) for the peripheral
+ * 3rd cell contain either 1 or 2 depending on the AHB
+ master used.
+- dma-requests: Number of DMA requests for the mux
+- dma-masters: phandle pointing to the DMA controller
+
+The DMA controller node need to have the following poroperties:
+- dma-requests: Number of DMA requests the controller can handle
+
+Example:
+
+dmac: dma@40002000 {
+ compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell";
+ arm,primecell-periphid = <0x00041080>;
+ reg = <0x40002000 0x1000>;
+ interrupts = <2>;
+ clocks = <&ccu1 CLK_CPU_DMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ lli-bus-interface-ahb1;
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb1;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+};
+
+dmamux: dma-mux {
+ compatible = "nxp,lpc1850-dmamux";
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&dmac>;
+};
+
+uart0: serial@40081000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+ clock-names = "uartclk", "reg";
+ dmas = <&dmamux 1 1 2
+ &dmamux 2 1 2>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
index cc29c35266e2..276ef815ef32 100644
--- a/Documentation/devicetree/bindings/dma/mv-xor.txt
+++ b/Documentation/devicetree/bindings/dma/mv-xor.txt
@@ -12,10 +12,13 @@ XOR engine has. Those sub-nodes have the following required
properties:
- interrupts: interrupt of the XOR channel
-And the following optional properties:
+The sub-nodes used to contain one or several of the following
+properties, but they are now deprecated:
- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
- dmacap,memset to indicate that the XOR channel is capable of memset operations
- dmacap,xor to indicate that the XOR channel is capable of xor operations
+- dmacap,interrupt to indicate that the XOR channel is capable of
+ generating interrupts
Example:
@@ -28,13 +31,8 @@ xor@d0060900 {
xor00 {
interrupts = <51>;
- dmacap,memcpy;
- dmacap,xor;
};
xor01 {
interrupts = <52>;
- dmacap,memcpy;
- dmacap,xor;
- dmacap,memset;
};
};
diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
new file mode 100644
index 000000000000..f1634a27a830
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
@@ -0,0 +1,46 @@
+Allwinner A10 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible: Must be "allwinner,sun4i-a10-dma"
+- reg: Should contain the registers base address and length
+- interrupts: Should contain a reference to the interrupt used by this device
+- clocks: Should contain a reference to the parent AHB clock
+- #dma-cells : Should be 2, first cell denoting normal or dedicated dma,
+ second cell holding the request line number.
+
+Example:
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun4i-a10-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <27>;
+ clocks = <&ahb_gates 6>;
+ #dma-cells = <2>;
+ };
+
+Clients:
+
+DMA clients connected to the Allwinner A10 DMA controller must use the
+format described in the dma.txt file, using a three-cell specifier for
+each channel: a phandle plus two integer cells.
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. Whether it is using normal (0) or dedicated (1) channels
+3. The port ID as specified in the datasheet
+
+Example:
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <0 12 4>;
+ clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 1 29>, <&dma 1 28>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt
new file mode 100644
index 000000000000..3207ceb04d0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/zxdma.txt
@@ -0,0 +1,38 @@
+* ZTE ZX296702 DMA controller
+
+Required properties:
+- compatible: Should be "zte,zx296702-dma"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: see dma.txt, should be 1, para number
+- dma-channels: physical channels supported
+- dma-requests: virtual channels supported, each virtual channel
+ have specific request line
+- clocks: clock required
+
+Example:
+
+Controller:
+ dma: dma-controller@0x09c00000{
+ compatible = "zte,zx296702-dma";
+ reg = <0x09c00000 0x1000>;
+ clocks = <&topclk ZX296702_DMA_ACLK>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <24>;
+ dma-requests = <24>;
+ };
+
+Client:
+Use specific request line passing from dmax
+For example, spdif0 tx channel request line is 4
+ spdif0: spdif0@0b004000 {
+ #sound-dai-cells = <0>;
+ compatible = "zte,zx296702-spdif";
+ reg = <0x0b004000 0x1000>;
+ clocks = <&lsp0clk ZX296702_SPDIF0_DIV>;
+ clock-names = "tx";
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 4>;
+ dma-names = "tx";
+ }
diff --git a/Documentation/devicetree/bindings/drm/msm/dsi.txt b/Documentation/devicetree/bindings/drm/msm/dsi.txt
index cd8fe6cf536c..d56923cd5590 100644
--- a/Documentation/devicetree/bindings/drm/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/dsi.txt
@@ -30,20 +30,27 @@ Optional properties:
- panel@0: Node of panel connected to this DSI controller.
See files in Documentation/devicetree/bindings/panel/ for each supported
panel.
-- qcom,dual-panel-mode: Boolean value indicating if the DSI controller is
+- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
driving a panel which needs 2 DSI links.
-- qcom,master-panel: Boolean value indicating if the DSI controller is driving
+- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
the master link of the 2-DSI panel.
-- qcom,sync-dual-panel: Boolean value indicating if the DSI controller is
+- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
driving a 2-DSI panel whose 2 links need receive command simultaneously.
- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
through MDP block
+- pinctrl-names: the pin control state names; should contain "default"
+- pinctrl-0: the default pinctrl state (active)
+- pinctrl-n: the "sleep" pinctrl state
+- port: DSI controller output port. This contains one endpoint subnode, with its
+ remote-endpoint set to the phandle of the connected panel's endpoint.
+ See Documentation/devicetree/bindings/graph.txt for device graph info.
DSI PHY:
Required properties:
- compatible: Could be the following
* "qcom,dsi-phy-28nm-hpm"
* "qcom,dsi-phy-28nm-lp"
+ * "qcom,dsi-phy-20nm"
- reg: Physical base address and length of the registers of PLL, PHY and PHY
regulator
- reg-names: The names of register regions. The following regions are required:
@@ -59,6 +66,10 @@ Required properties:
* "iface_clk"
- vddio-supply: phandle to vdd-io regulator device node
+Optional properties:
+- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
+ regulator is wanted.
+
Example:
mdss_dsi0: qcom,mdss_dsi@fd922800 {
compatible = "qcom,mdss-dsi-ctrl";
@@ -90,9 +101,13 @@ Example:
qcom,dsi-phy = <&mdss_dsi_phy0>;
- qcom,dual-panel-mode;
- qcom,master-panel;
- qcom,sync-dual-panel;
+ qcom,dual-dsi-mode;
+ qcom,master-dsi;
+ qcom,sync-dual-dsi;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mdss_dsi_active>;
+ pinctrl-1 = <&mdss_dsi_suspend>;
panel: panel@0 {
compatible = "sharp,lq101r1sx01";
@@ -101,6 +116,18 @@ Example:
power-supply = <...>;
backlight = <...>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+
+ port {
+ dsi0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
};
};
@@ -117,4 +144,6 @@ Example:
clock-names = "iface_clk";
clocks = <&mmcc MDSS_AHB_CLK>;
vddio-supply = <&pma8084_l12>;
+
+ qcom,dsi-phy-regulator-ldo-mode;
};
diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
index c43aa53debed..e926239e1101 100644
--- a/Documentation/devicetree/bindings/drm/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
@@ -2,8 +2,9 @@ Qualcomm adreno/snapdragon hdmi output
Required properties:
- compatible: one of the following
+ * "qcom,hdmi-tx-8994"
* "qcom,hdmi-tx-8084"
- * "qcom,hdmi-tx-8074"
+ * "qcom,hdmi-tx-8974"
* "qcom,hdmi-tx-8660"
* "qcom,hdmi-tx-8960"
- reg: Physical base address and length of the controller's registers
diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
index 45414bbcd945..f61d5af44a27 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
@@ -10,8 +10,11 @@ Required Properties:
Optional Properties:
- ti,wakeup : To enable the wakeup comparator in probe
- - ti,enable-id-detection: Perform ID detection.
+ - ti,enable-id-detection: Perform ID detection. If id-gpio is specified
+ it performs id-detection using GPIO else using OTG core.
- ti,enable-vbus-detection: Perform VBUS detection.
+ - id-gpio: gpio for GPIO ID detection. See gpio binding.
+ - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds.
palmas-usb {
compatible = "ti,twl6035-usb", "ti,palmas-usb";
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
index 435f1bcca341..b405b4410bfb 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
@@ -33,6 +33,13 @@ Optional properties:
- interrupt-parent:
phandle of the parent interrupt controller
+- interrupts-extended:
+ Alternate form of specifying interrupts and parents that allows for
+ multiple parents. This takes precedence over 'interrupts' and
+ 'interrupt-parent'. Wakeup-capable GPIO controllers often route their
+ wakeup interrupt lines through a different interrupt controller than the
+ primary interrupt line, making this property necessary.
+
- #interrupt-cells:
Should be <2>. The first cell is the GPIO number, the second should specify
flags. The following subset of flags is supported:
@@ -47,19 +54,33 @@ Optional properties:
- interrupt-controller:
Marks the device node as an interrupt controller
-- interrupt-names:
- The name of the IRQ resource used by this controller
+- wakeup-source:
+ GPIOs for this controller can be used as a wakeup source
Example:
upg_gio: gpio@f040a700 {
- #gpio-cells = <0x2>;
- #interrupt-cells = <0x2>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
gpio-controller;
interrupt-controller;
reg = <0xf040a700 0x80>;
- interrupt-parent = <0xf>;
+ interrupt-parent = <&irq0_intc>;
+ interrupts = <0x6>;
+ brcm,gpio-bank-widths = <32 32 32 24>;
+ };
+
+ upg_gio_aon: gpio@f04172c0 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+ gpio-controller;
+ interrupt-controller;
+ reg = <0xf04172c0 0x40>;
+ interrupt-parent = <&irq0_aon_intc>;
interrupts = <0x6>;
- interrupt-names = "upg_gio";
- brcm,gpio-bank-widths = <0x20 0x20 0x20 0x18>;
+ interrupts-extended = <&irq0_aon_intc 0x6>,
+ <&aon_pm_l2_intc 0x5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt
index abf4db736c6e..170194af3027 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt
@@ -2,8 +2,9 @@ Axis ETRAX FS General I/O controller bindings
Required properties:
-- compatible:
+- compatible: one of:
- "axis,etraxfs-gio"
+ - "axis,artpec3-gio"
- reg: Physical base address and length of the controller's registers.
- #gpio-cells: Should be 3
- The first cell is the gpio offset number.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
new file mode 100644
index 000000000000..805ddcd79a57
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -0,0 +1,22 @@
+* Freescale MPC512x/MPC8xxx GPIO controller
+
+Required properties:
+- compatible : Should be "fsl,<soc>-gpio"
+ The following <soc>s are known to be supported:
+ mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all 32 pins.
+- #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify the gpio polarity:
+ 0 = active high
+ 1 = active low
+
+Example:
+
+gpio0: gpio@1100 {
+ compatible = "fsl,mpc5125-gpio";
+ #gpio-cells = <2>;
+ reg = <0x1100 0x080>;
+ interrupts = <78 0x8>;
+ status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index 38fb86f28ba2..f60e2f477e93 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -9,6 +9,7 @@ Required Properties:
- "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller.
- "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller.
- "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller.
+ - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller.
- "renesas,gpio-rcar": for generic R-Car GPIO controller.
- reg: Base address and length of each memory resource used by the GPIO
diff --git a/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt b/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
new file mode 100644
index 000000000000..0dab156fcf41
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
@@ -0,0 +1,24 @@
+ZTE ZX296702 GPIO controller
+
+Required properties:
+- compatible : "zte,zx296702-gpio"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters:
+ - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupts : Interrupt mapping for GPIO IRQ.
+- gpio-ranges : Interaction with the PINCTRL subsystem.
+
+gpio1: gpio@b008040 {
+ compatible = "zte,zx296702-gpio";
+ reg = <0xb008040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 54 2 &pmx0 2 59 14>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clock-names = "gpio_pclk";
+ clocks = <&lsp0clk ZX296702_GPIO_CLK>;
+};
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index 009f4bfa1590..e685610d38e2 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -197,9 +197,11 @@ of the following host1x client modules:
- sor: serial output resource
Required properties:
- - compatible: For Tegra124, must contain "nvidia,tegra124-sor". Otherwise,
- must contain '"nvidia,<chip>-sor", "nvidia,tegra124-sor"', where <chip>
- is tegra132.
+ - compatible: Should be:
+ - "nvidia,tegra124-sor": for Tegra124 and Tegra132
+ - "nvidia,tegra132-sor": for Tegra132
+ - "nvidia,tegra210-sor": for Tegra210
+ - "nvidia,tegra210-sor1": for Tegra210
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain an entry for each entry in clock-names.
diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
index 6b1d75f1a529..a36dfce0032e 100644
--- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -52,10 +52,9 @@ STMicroelectronics stih4xx platforms
See ../reset/reset.txt for details.
- reset-names: names of the resets listed in resets property in the same
order.
- - ranges: to allow probing of subdevices
- sti-hdmi: hdmi output block
- must be a child of sti-tvout
+ must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-hdmi";
- reg: Physical base address of the IP registers and length of memory mapped region.
@@ -72,7 +71,7 @@ STMicroelectronics stih4xx platforms
sti-hda:
Required properties:
- must be a child of sti-tvout
+ must be a child of sti-display-subsystem
- compatible: "st,stih<chip>-hda"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
@@ -85,7 +84,7 @@ sti-hda:
sti-dvo:
Required properties:
- must be a child of sti-tvout
+ must be a child of sti-display-subsystem
- compatible: "st,stih<chip>-dvo"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
@@ -195,38 +194,37 @@ Example:
reg-names = "tvout-reg", "hda-reg", "syscfg";
reset-names = "tvout";
resets = <&softreset STIH416_HDTVOUT_SOFTRESET>;
- ranges;
-
- sti-hdmi@fe85c000 {
- compatible = "st,stih416-hdmi";
- reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
- reg-names = "hdmi-reg", "syscfg";
- interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>;
- interrupt-names = "irq";
- clock-names = "pix", "tmds", "phy", "audio";
- clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
- };
-
- sti-hda@fe85a000 {
- compatible = "st,stih416-hda";
- reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>;
- reg-names = "hda-reg", "video-dacs-ctrl";
- clock-names = "pix", "hddac";
- clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
- };
-
- sti-dvo@8d00400 {
- compatible = "st,stih407-dvo";
- reg = <0x8d00400 0x200>;
- reg-names = "dvo-reg";
- clock-names = "dvo_pix", "dvo",
- "main_parent", "aux_parent";
- clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
- <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dvo>;
- sti,panel = <&panel_dvo>;
- };
+ };
+
+ sti-hdmi@fe85c000 {
+ compatible = "st,stih416-hdmi";
+ reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+ reg-names = "hdmi-reg", "syscfg";
+ interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix", "tmds", "phy", "audio";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
+ };
+
+ sti-hda@fe85a000 {
+ compatible = "st,stih416-hda";
+ reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix", "hddac";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
+ };
+
+ sti-dvo@8d00400 {
+ compatible = "st,stih407-dvo";
+ reg = <0x8d00400 0x200>;
+ reg-names = "dvo-reg";
+ clock-names = "dvo_pix", "dvo",
+ "main_parent", "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
+ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dvo>;
+ sti,panel = <&panel_dvo>;
};
sti-hqvdp@9c000000 {
@@ -237,7 +235,7 @@ Example:
reset-names = "hqvdp";
resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
st,vtg = <&vtg_main>;
- };
+ };
};
...
};
diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt
new file mode 100644
index 000000000000..e7fd921aa4f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm70.txt
@@ -0,0 +1,21 @@
+* LM70/TMP121/LM71/LM74 thermometer.
+
+Required properties:
+- compatible: one of
+ "ti,lm70"
+ "ti,tmp121"
+ "ti,lm71"
+ "ti,lm74"
+
+See Documentation/devicetree/bindings/spi/spi-bus.txt for more required and
+optional properties.
+
+Example:
+
+spi_master {
+ temperature-sensor@0 {
+ compatible = "ti,lm70";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
index ed2f09dc2483..a7afbf60bb9c 100644
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -3,10 +3,16 @@ ltc2978
Required properties:
- compatible: should contain one of:
* "lltc,ltc2974"
+ * "lltc,ltc2975"
* "lltc,ltc2977"
* "lltc,ltc2978"
+ * "lltc,ltc2980"
* "lltc,ltc3880"
+ * "lltc,ltc3882"
* "lltc,ltc3883"
+ * "lltc,ltc3886"
+ * "lltc,ltc3887"
+ * "lltc,ltm2987"
* "lltc,ltm4676"
- reg: I2C slave address
@@ -17,10 +23,10 @@ Optional properties:
standard binding for regulators; see regulator.txt.
Valid names of regulators depend on number of supplies supported per device:
- * ltc2974 : vout0 - vout3
- * ltc2977 : vout0 - vout7
+ * ltc2974, ltc2975 : vout0 - vout3
+ * ltc2977, ltc2980, ltm2987 : vout0 - vout7
* ltc2978 : vout0 - vout7
- * ltc3880 : vout0 - vout1
+ * ltc3880, ltc3882, ltc3886 : vout0 - vout1
* ltc3883 : vout0
* ltm4676 : vout0 - vout1
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
index b85184391b78..2a1f3af30155 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
@@ -18,6 +18,7 @@ Required properties:
"mcp3202"
"mcp3204"
"mcp3208"
+ "mcp3301"
Examples:
diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
index 3eb40e20c143..1aad0514e647 100644
--- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
@@ -17,6 +17,11 @@ Recommended properties:
- Frequency in normal mode (ADLPC=0, ADHSC=0)
- Frequency in high-speed mode (ADLPC=0, ADHSC=1)
- Frequency in low-power mode (ADLPC=1, ADHSC=0)
+- min-sample-time: Minimum sampling time in nanoseconds. This value has
+ to be chosen according to the conversion mode and the connected analog
+ source resistance (R_as) and capacitance (C_as). Refer the datasheet's
+ operating requirements. A safe default across a wide range of R_as and
+ C_as as well as conversion modes is 1000ns.
Example:
adc0: adc@4003b000 {
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt
new file mode 100644
index 000000000000..a01235c7fa15
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt
@@ -0,0 +1,13 @@
+* MEMSIC MMC35240 magnetometer sensor
+
+Required properties:
+
+ - compatible : should be "memsic,mmc35240"
+ - reg : the I2C address of the magnetometer
+
+Example:
+
+mmc35240@30 {
+ compatible = "memsic,mmc35240";
+ reg = <0x30>;
+};
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 8a6be3bdf267..d3ccdb190c53 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -35,6 +35,7 @@ Accelerometers:
- st,lsm303dl-accel
- st,lsm303dlm-accel
- st,lsm330-accel
+- st,lsm303agr-accel
Gyroscopes:
- st,l3g4200d-gyro
@@ -46,6 +47,7 @@ Gyroscopes:
- st,lsm330-gyro
Magnetometers:
+- st,lsm303agr-magn
- st,lsm303dlh-magn
- st,lsm303dlhc-magn
- st,lsm303dlm-magn
diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
index 5f7619c22743..df8b1279491d 100644
--- a/Documentation/devicetree/bindings/input/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/ads7846.txt
@@ -64,7 +64,7 @@ Optional properties:
pendown-gpio (u32).
pendown-gpio GPIO handle describing the pin the !PENIRQ
line is connected to.
- linux,wakeup use any event on touchscreen as wakeup event.
+ wakeup-source use any event on touchscreen as wakeup event.
Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
diff --git a/Documentation/devicetree/bindings/input/cap11xx.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
index 7d0a3009771b..8c67a0b5058d 100644
--- a/Documentation/devicetree/bindings/input/cap11xx.txt
+++ b/Documentation/devicetree/bindings/input/cap11xx.txt
@@ -55,5 +55,24 @@ i2c_controller {
<105>, /* KEY_LEFT */
<109>, /* KEY_PAGEDOWN */
<104>; /* KEY_PAGEUP */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usr@0 {
+ label = "cap11xx:green:usr0";
+ reg = <0>;
+ };
+
+ usr@1 {
+ label = "cap11xx:green:usr1";
+ reg = <1>;
+ };
+
+ alive@2 {
+ label = "cap11xx:green:alive";
+ reg = <2>;
+ linux,default_trigger = "heartbeat";
+ };
};
}
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
new file mode 100644
index 000000000000..635a3b036630
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
@@ -0,0 +1,44 @@
+Cypress I2C Touchpad
+
+Required properties:
+- compatible: must be "cypress,cyapa".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+ binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+ binding[0]).
+
+Optional properties:
+- wakeup-source: touchpad can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+ pinctrl binding [1]).
+- vcc-supply: a phandle for the regulator supplying 3.3V power.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+ &i2c0 {
+ /* ... */
+
+ /* Cypress Gen3 touchpad */
+ touchpad@67 {
+ compatible = "cypress,cyapa";
+ reg = <0x24>;
+ interrupt-parent = <&gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
+ wakeup-source;
+ };
+
+ /* Cypress Gen5 and later touchpad */
+ touchpad@24 {
+ compatible = "cypress,cyapa";
+ reg = <0x24>;
+ interrupt-parent = <&gpio>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
+ wakeup-source;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt
index a765232e6446..8a71038f3489 100644
--- a/Documentation/devicetree/bindings/input/elants_i2c.txt
+++ b/Documentation/devicetree/bindings/input/elants_i2c.txt
@@ -13,6 +13,9 @@ Optional properties:
- pinctrl-names: should be "default" (see pinctrl binding [1]).
- pinctrl-0: a phandle pointing to the pin settings for the device (see
pinctrl binding [1]).
+- reset-gpios: reset gpio the chip is connected to.
+- vcc33-supply: a phandle for the regulator supplying 3.3V power.
+- vccio-supply: a phandle for the regulator supplying IO power.
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
index 313abefa37cc..5b91f5a3bd5c 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
@@ -20,7 +20,7 @@ Optional subnode-properties:
If not specified defaults to <1> == EV_KEY.
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- - gpio-key,wakeup: Boolean, button can wake-up the system.
+ - wakeup-source: Boolean, button can wake-up the system.
Example nodes:
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index 44b705767aca..072bf7573c37 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -23,7 +23,7 @@ Optional subnode-properties:
If not specified defaults to <1> == EV_KEY.
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- - gpio-key,wakeup: Boolean, button can wake-up the system.
+ - wakeup-source: Boolean, button can wake-up the system.
- linux,can-disable: Boolean, indicates that button is connected
to dedicated (not shared) interrupt which can be disabled to
suppress events from the button.
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
index ead641c65e0a..4d86059c370c 100644
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -19,7 +19,7 @@ Required Properties:
Optional Properties:
- linux,no-autorepeat: do no enable autorepeat feature.
-- linux,wakeup: use any event on keypad as wakeup event.
+- wakeup-source: use any event on keypad as wakeup event.
- debounce-delay-ms: debounce interval in milliseconds
- col-scan-delay-us: delay, measured in microseconds, that is needed
before we can scan keypad after activating column gpio
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
index 7d8cb92831d7..ee6215681182 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -33,7 +33,7 @@ PROPERTIES
Value type: <bool>
Definition: don't enable autorepeat feature.
-- linux,keypad-wakeup:
+- wakeup-source:
Usage: optional
Value type: <bool>
Definition: use any event on keypad as wakeup event.
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 942d071baaa5..863e77f619dc 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -36,9 +36,11 @@ Required Board Specific Properties:
- pinctrl-0: Should specify pin control groups used for this controller.
- pinctrl-names: Should contain only one value - "default".
+Optional Properties:
+- wakeup-source: use any event on keypad as wakeup event.
+
Optional Properties specific to linux:
- linux,keypad-no-autorepeat: do no enable autorepeat feature.
-- linux,keypad-wakeup: use any event on keypad as wakeup event.
Example:
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
new file mode 100644
index 000000000000..70c14250323b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
index 6e551090f465..8eb240a287c8 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -8,6 +8,9 @@ Required properties:
- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+Optional properties:
+- reset-gpio: GPIO connected to the RESET line of the chip
+
Example:
i2c@00000000 {
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
index 80c37df940a7..e3c27c4fd9c8 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
@@ -4,12 +4,12 @@ Required properties:
- compatible: must be "neonode,zforce"
- reg: I2C address of the chip
- interrupts: interrupt to which the chip is connected
-- gpios: gpios the chip is connected to
- first one is the interrupt gpio and second one the reset gpio
+- reset-gpios: reset gpio the chip is connected to
- x-size: horizontal resolution of touchscreen
- y-size: vertical resolution of touchscreen
Optional properties:
+- irq-gpios : interrupt gpio the chip is connected to
- vdd-supply: Regulator controlling the controller supply
Example:
@@ -23,8 +23,8 @@ Example:
interrupts = <2 0>;
vdd-supply = <&reg_zforce_vdd>;
- gpios = <&gpio5 6 0>, /* INT */
- <&gpio5 9 0>; /* RST */
+ reset-gpios = <&gpio5 9 0>; /* RST */
+ irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
x-size = <800>;
y-size = <600>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 7da578d72123..2d6c8bb4d827 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -5,9 +5,14 @@ The BCM2835 contains a custom top-level interrupt controller, which supports
controller, or the HW block containing it, is referred to occasionally
as "armctrl" in the SoC documentation, hence naming of this binding.
+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
Required properties:
-- compatible : should be "brcm,bcm2835-armctrl-ic"
+- compatible : should be "brcm,bcm2835-armctrl-ic" or
+ "brcm,bcm2836-armctrl-ic"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
@@ -20,6 +25,12 @@ Required properties:
The 2nd cell contains the interrupt number within the bank. Valid values
are 0..7 for bank 0, and 0..31 for bank 1.
+Additional required properties for brcm,bcm2836-armctrl-ic:
+- interrupt-parent : Specifies the parent interrupt controller when this
+ controller is the second level.
+- interrupts : Specifies the interrupt on the parent for this interrupt
+ controller to handle.
+
The interrupt sources are as follows:
Bank 0:
@@ -102,9 +113,21 @@ Bank 2:
Example:
+/* BCM2835, first level */
intc: interrupt-controller {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
+
+/* BCM2836, second level */
+intc: interrupt-controller {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&local_intc>;
+ interrupts = <8>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
new file mode 100644
index 000000000000..f320dcd6e69b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -0,0 +1,37 @@
+BCM2836 per-CPU interrupt controller
+
+The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+events, and SMP IPIs. One of the CPUs may receive interrupts for the
+peripheral (GPU) events, which chain to the BCM2835-style interrupt
+controller.
+
+Required properties:
+
+- compatible: Should be "brcm,bcm2836-l1-intc"
+- reg: Specifies base physical address and size of the
+ registers
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+The interrupt sources are as follows:
+
+0: CNTPSIRQ
+1: CNTPNSIRQ
+2: CNTHPIRQ
+3: CNTVIRQ
+8: GPU_FAST
+9: PMU_FAST
+
+Example:
+
+local_intc: local_intc {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&local_intc>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
new file mode 100644
index 000000000000..c60c034dcf19
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
@@ -0,0 +1,135 @@
+This document describes the generic device tree binding for MSI controllers and
+their master(s).
+
+Message Signaled Interrupts (MSIs) are a class of interrupts generated by a
+write to an MMIO address.
+
+MSIs were originally specified by PCI (and are used with PCIe), but may also be
+used with other busses, and hence a mechanism is required to relate devices on
+those busses to the MSI controllers which they are capable of using,
+potentially including additional information.
+
+MSIs are distinguished by some combination of:
+
+- The doorbell (the MMIO address written to).
+
+ Devices may be configured by software to write to arbitrary doorbells which
+ they can address. An MSI controller may feature a number of doorbells.
+
+- The payload (the value written to the doorbell).
+
+ Devices may be configured to write an arbitrary payload chosen by software.
+ MSI controllers may have restrictions on permitted payloads.
+
+- Sideband information accompanying the write.
+
+ Typically this is neither configurable nor probeable, and depends on the path
+ taken through the memory system (i.e. it is a property of the combination of
+ MSI controller and device rather than a property of either in isolation).
+
+
+MSI controllers:
+================
+
+An MSI controller signals interrupts to a CPU when a write is made to an MMIO
+address by some master. An MSI controller may feature a number of doorbells.
+
+Required properties:
+--------------------
+
+- msi-controller: Identifies the node as an MSI controller.
+
+Optional properties:
+--------------------
+
+- #msi-cells: The number of cells in an msi-specifier, required if not zero.
+
+ Typically this will encode information related to sideband data, and will
+ not encode doorbells or payloads as these can be configured dynamically.
+
+ The meaning of the msi-specifier is defined by the device tree binding of
+ the specific MSI controller.
+
+
+MSI clients
+===========
+
+MSI clients are devices which generate MSIs. For each MSI they wish to
+generate, the doorbell and payload may be configured, though sideband
+information may not be configurable.
+
+Required properties:
+--------------------
+
+- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI
+ controller which the device is capable of using.
+
+ This property is unordered, and MSIs may be allocated from any combination of
+ MSI controllers listed in the msi-parent property.
+
+ If a device has restrictions on the allocation of MSIs, these restrictions
+ must be described with additional properties.
+
+ When #msi-cells is non-zero, busses with an msi-parent will require
+ additional properties to describe the relationship between devices on the bus
+ and the set of MSIs they can potentially generate.
+
+
+Example
+=======
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi_a: msi-controller@a {
+ reg = <0xa 0xf00>;
+ compatible = "vendor-a,some-controller";
+ msi-controller;
+ /* No sideband data, so #msi-cells omitted */
+ };
+
+ msi_b: msi-controller@b {
+ reg = <0xb 0xf00>;
+ compatible = "vendor-b,another-controller";
+ msi-controller;
+ /* Each device has some unique ID */
+ #msi-cells = <1>;
+ };
+
+ msi_c: msi-controller@c {
+ reg = <0xb 0xf00>;
+ compatible = "vendor-b,another-controller";
+ msi-controller;
+ /* Each device has some unique ID */
+ #msi-cells = <1>;
+ };
+
+ dev@0 {
+ reg = <0x0 0xf00>;
+ compatible = "vendor-c,some-device";
+
+ /* Can only generate MSIs to msi_a */
+ msi-parent = <&msi_a>;
+ };
+
+ dev@1 {
+ reg = <0x1 0xf00>;
+ compatible = "vendor-c,some-device";
+
+ /*
+ * Can generate MSIs to either A or B.
+ */
+ msi-parent = <&msi_a>, <&msi_b 0x17>;
+ };
+
+ dev@2 {
+ reg = <0x2 0xf00>;
+ compatible = "vendor-c,some-device";
+ /*
+ * Has different IDs at each MSI controller.
+ * Can generate MSIs to all of the MSI controllers.
+ */
+ msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 747c53805eec..68419843e32f 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -29,14 +29,23 @@ Optional properties for child nodes:
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
-- max-microamp : maximum intensity in microamperes of the LED
- (torch LED for flash devices)
-- flash-max-microamp : maximum intensity in microamperes of the
- flash LED; it is mandatory if the LED should
- support the flash mode
-- flash-timeout-us : timeout in microseconds after which the flash
- LED is turned off
+- led-max-microamp : Maximum LED supply current in microamperes. This property
+ can be made mandatory for the board configurations
+ introducing a risk of hardware damage in case an excessive
+ current is set.
+ For flash LED controllers with configurable current this
+ property is mandatory for the LEDs in the non-flash modes
+ (e.g. torch or indicator).
+Required properties for flash LED child nodes:
+- flash-max-microamp : Maximum flash LED supply current in microamperes.
+- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
+ LED is turned off.
+
+For controllers that have no configurable current the flash-max-microamp
+property can be omitted.
+For controllers that have no configurable timeout the flash-max-timeout-us
+property can be omitted.
Examples:
@@ -49,7 +58,7 @@ system-status {
camera-flash {
label = "Flash";
led-sources = <0>, <1>;
- max-microamp = <50000>;
+ led-max-microamp = <50000>;
flash-max-microamp = <320000>;
- flash-timeout-us = <500000>;
+ flash-max-timeout-us = <500000>;
};
diff --git a/Documentation/devicetree/bindings/leds/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt
index aef3aca34d2d..9f81258a5b6e 100644
--- a/Documentation/devicetree/bindings/leds/leds-ns2.txt
+++ b/Documentation/devicetree/bindings/leds/leds-ns2.txt
@@ -8,6 +8,9 @@ Each LED is represented as a sub-node of the ns2-leds device.
Required sub-node properties:
- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
+- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and
+ the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations
+ should be given in order to avoid having an unknown mode at driver probe time.
Optional sub-node properties:
- label: Name for this LED. If omitted, the label is taken from the node name.
@@ -15,6 +18,8 @@ Optional sub-node properties:
Example:
+#include <dt-bindings/leds/leds-ns2.h>
+
ns2-leds {
compatible = "lacie,ns2-leds";
@@ -22,5 +27,9 @@ ns2-leds {
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 0 1
+ NS_V2_LED_ON 1 0
+ NS_V2_LED_ON 0 0
+ NS_V2_LED_SATA 1 1>;
};
};
diff --git a/Documentation/devicetree/bindings/leds/leds-powernv.txt b/Documentation/devicetree/bindings/leds/leds-powernv.txt
new file mode 100644
index 000000000000..66655690f749
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-powernv.txt
@@ -0,0 +1,26 @@
+Device Tree binding for LEDs on IBM Power Systems
+-------------------------------------------------
+
+Required properties:
+- compatible : Should be "ibm,opal-v3-led".
+- led-mode : Should be "lightpath" or "guidinglight".
+
+Each location code of FRU/Enclosure must be expressed in the
+form of a sub-node.
+
+Required properties for the sub nodes:
+- led-types : Supported LED types (attention/identify/fault) provided
+ in the form of string array.
+
+Example:
+
+leds {
+ compatible = "ibm,opal-v3-led";
+ led-mode = "lightpath";
+
+ U78C9.001.RST0027-P1-C1 {
+ led-types = "identify", "fault";
+ };
+ ...
+ ...
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
new file mode 100644
index 000000000000..e6df32f9986d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
@@ -0,0 +1,125 @@
+* Device tree bindings for ARM PL172 MultiPort Memory Controller
+
+Required properties:
+
+- compatible: "arm,pl172", "arm,primecell"
+
+- reg: Must contains offset/length value for controller.
+
+- #address-cells: Must be 2. The partition number has to be encoded in the
+ first address cell and it may accept values 0..N-1
+ (N - total number of partitions). The second cell is the
+ offset into the partition.
+
+- #size-cells: Must be set to 1.
+
+- ranges: Must contain one or more chip select memory regions.
+
+- clocks: Must contain references to controller clocks.
+
+- clock-names: Must contain "mpmcclk" and "apb_pclk".
+
+- clock-ranges: Empty property indicating that child nodes can inherit
+ named clocks. Required only if clock tree data present
+ in device tree.
+ See clock-bindings.txt
+
+Child chip-select (cs) nodes contain the memory devices nodes connected to
+such as NOR (e.g. cfi-flash) and NAND.
+
+Required child cs node properties:
+
+- #address-cells: Must be 2.
+
+- #size-cells: Must be 1.
+
+- ranges: Empty property indicating that child nodes can inherit
+ memory layout.
+
+- clock-ranges: Empty property indicating that child nodes can inherit
+ named clocks. Required only if clock tree data present
+ in device tree.
+
+- mpmc,cs: Chip select number. Indicates to the pl0172 driver
+ which chipselect is used for accessing the memory.
+
+- mpmc,memory-width: Width of the chip select memory. Must be equal to
+ either 8, 16 or 32.
+
+Optional child cs node config properties:
+
+- mpmc,async-page-mode: Enable asynchronous page mode.
+
+- mpmc,cs-active-high: Set chip select polarity to active high.
+
+- mpmc,byte-lane-low: Set byte lane state to low.
+
+- mpmc,extended-wait: Enable extended wait.
+
+- mpmc,buffer-enable: Enable write buffer.
+
+- mpmc,write-protect: Enable write protect.
+
+Optional child cs node timing properties:
+
+- mpmc,write-enable-delay: Delay from chip select assertion to write
+ enable (WE signal) in nano seconds.
+
+- mpmc,output-enable-delay: Delay from chip select assertion to output
+ enable (OE signal) in nano seconds.
+
+- mpmc,write-access-delay: Delay from chip select assertion to write
+ access in nano seconds.
+
+- mpmc,read-access-delay: Delay from chip select assertion to read
+ access in nano seconds.
+
+- mpmc,page-mode-read-delay: Delay for asynchronous page mode sequential
+ accesses in nano seconds.
+
+- mpmc,turn-round-delay: Delay between access to memory banks in nano
+ seconds.
+
+If any of the above timing parameters are absent, current parameter value will
+be taken from the corresponding HW reg.
+
+Example for pl172 with nor flash on chip select 0 shown below.
+
+emc: memory-controller@40005000 {
+ compatible = "arm,pl172", "arm,primecell";
+ reg = <0x40005000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+ clock-names = "mpmcclk", "apb_pclk";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1c000000 0x1000000
+ 1 0 0x1d000000 0x1000000
+ 2 0 0x1e000000 0x1000000
+ 3 0 0x1f000000 0x1000000>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-enable-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ flash@0,0 {
+ compatible = "sst,sst39vf320", "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "data";
+ reg = <0 0x400000>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
index d5e370450ac0..89427b018ba7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
@@ -18,6 +18,8 @@ Properties:
interrupt (NAND_EVTER_STAT). If there is only one,
that interrupt reports both types of event.
+- little-endian : If this property is absent, the big-endian mode will
+ be in use as default for registers.
- ranges : Each range corresponds to a single chipselect, and covers
the entire access window as configured.
@@ -34,6 +36,7 @@ Example:
#size-cells = <1>;
reg = <0x0 0xffe1e000 0 0x2000>;
interrupts = <16 2 19 2>;
+ little-endian;
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
index f9c6454146b6..a43d26d41e04 100644
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
@@ -1,5 +1,9 @@
Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
+This controller has an optional ECC support in half-bus width (16-bit)
+configuration. The ECC controller corrects one bit error and detects
+two bit errors.
+
Required properties:
- compatible: Should be 'xlnx,zynq-ddrc-a05'
- reg: Base address and size of the controllers memory area
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
index f64de95a8e8b..ad5d90482a0e 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -2,7 +2,11 @@ Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
Required properties:
- compatible: value should be one of the following:
+ "atmel,at91sam9n12-hlcdc"
+ "atmel,at91sam9x5-hlcdc"
+ "atmel,sama5d2-hlcdc"
"atmel,sama5d3-hlcdc"
+ "atmel,sama5d4-hlcdc"
- reg: base address and size of the HLCDC device registers.
- clock-names: the name of the 3 clocks requested by the HLCDC device.
Should contain "periph_clk", "sys_clk" and "slow_clk".
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 753f14f46e85..41811223e5be 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -1,12 +1,14 @@
AXP family PMIC device tree bindings
The axp20x family current members :
+axp152 (X-Powers)
axp202 (X-Powers)
axp209 (X-Powers)
axp221 (X-Powers)
Required properties:
-- compatible: "x-powers,axp202", "x-powers,axp209", "x-powers,axp221"
+- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
+ "x-powers,axp221"
- reg: The I2C slave address for the AXP chip
- interrupt-parent: The parent interrupt controller
- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
new file mode 100644
index 000000000000..38802b54d48a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -0,0 +1,88 @@
+* Dialog DA9062 Power Management Integrated Circuit (PMIC)
+
+DA9062 consists of a large and varied group of sub-devices:
+
+Device Supply Names Description
+------ ------------ -----------
+da9062-regulator : : LDOs & BUCKs
+da9062-rtc : : Real-Time Clock
+da9062-watchdog : : Watchdog Timer
+
+======
+
+Required properties:
+
+- compatible : Should be "dlg,da9062".
+- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
+ modified to match the chip's OTP settings).
+- interrupt-parent : Specifies the reference to the interrupt controller for
+ the DA9062.
+- interrupts : IRQ line information.
+- interrupt-controller
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+further information on IRQ bindings.
+
+Sub-nodes:
+
+- regulators : This node defines the settings for the LDOs and BUCKs. The
+ DA9062 regulators are bound using their names listed below:
+
+ buck1 : BUCK_1
+ buck2 : BUCK_2
+ buck3 : BUCK_3
+ buck4 : BUCK_4
+ ldo1 : LDO_1
+ ldo2 : LDO_2
+ ldo3 : LDO_3
+ ldo4 : LDO_4
+
+ The component follows the standard regulator framework and the bindings
+ details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+- rtc : This node defines settings required for the Real-Time Clock associated
+ with the DA9062. There are currently no entries in this binding, however
+ compatible = "dlg,da9062-rtc" should be added if a node is created.
+
+- watchdog: This node defines the settings for the watchdog driver associated
+ with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added
+ if a node is created.
+
+
+Example:
+
+ pmic0: da9062@58 {
+ compatible = "dlg,da9062";
+ reg = <0x58>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9062-rtc";
+ };
+
+ watchdog {
+ compatible = "dlg,da9062-watchdog";
+ };
+
+ regulators {
+ DA9062_BUCK1: buck1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <2000000>;
+ regulator-boot-on;
+ };
+ DA9062_LDO1: ldo1 {
+ regulator-name = "LDO_1";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 163bd81a4607..741e76688cf2 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -7,8 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c
client while probing.This document describes the binding for mfd device and
PMIC submodule.
-Binding for the built-in 32k clock generator block is defined separately
-in bindings/clk/maxim,max77686.txt file.
+Bindings for the built-in 32k clock generator block and
+regulators are defined in ../clk/maxim,max77686.txt and
+../regulator/max77686.txt respectively.
Required properties:
- compatible : Must be "maxim,max77686";
@@ -16,67 +17,11 @@ Required properties:
- interrupts : This i2c device has an IRQ line connected to the main SoC.
- interrupt-parent : The parent interrupt controller.
-Optional node:
-- voltage-regulators : The regulators of max77686 have to be instantiated
- under subnode named "voltage-regulators" using the following format.
-
- regulator_name {
- regulator-compatible = LDOn/BUCKn
- standard regulator constraints....
- };
- refer Documentation/devicetree/bindings/regulator/regulator.txt
-
- The regulator-compatible property of regulator should initialized with string
-to get matched with their hardware counterparts as follow:
-
- -LDOn : for LDOs, where n can lie in range 1 to 26.
- example: LDO1, LDO2, LDO26.
- -BUCKn : for BUCKs, where n can lie in range 1 to 9.
- example: BUCK1, BUCK5, BUCK9.
-
- Regulators which can be turned off during system suspend:
- -LDOn : 2, 6-8, 10-12, 14-16,
- -BUCKn : 1-4.
- Use standard regulator bindings for it ('regulator-off-in-suspend').
-
- LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
- control. To turn this feature on this property must be added to the regulator
- sub-node:
- - maxim,ena-gpios : one GPIO specifier enable control (the gpio
- flags are actually ignored and always
- ACTIVE_HIGH is used)
-
Example:
- max77686@09 {
+ max77686: pmic@09 {
compatible = "maxim,max77686";
interrupt-parent = <&wakeup_eint>;
interrupts = <26 0>;
reg = <0x09>;
-
- voltage-regulators {
- ldo11_reg {
- regulator-compatible = "LDO11";
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1900000>;
- regulator-max-microvolt = <1900000>;
- regulator-always-on;
- };
-
- buck1_reg {
- regulator-compatible = "BUCK1";
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck9_reg {
- regulator-compatible = "BUCK9";
- regulator-name = "CAM_ISP_CORE_1.2V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1200000>;
- maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
- };
- }
+ };
diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
new file mode 100644
index 000000000000..51fc1a60caa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77802.txt
@@ -0,0 +1,26 @@
+Maxim MAX77802 multi-function device
+
+The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
+efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
+up application processors and peripherals, a 2-channel 32kHz clock outputs,
+a Real-Time-Clock (RTC) and a I2C interface to program the individual
+regulators, clocks outputs and the RTC.
+
+Bindings for the built-in 32k clock generator block and
+regulators are defined in ../clk/maxim,max77802.txt and
+../regulator/max77802.txt respectively.
+
+Required properties:
+- compatible : Must be "maxim,max77802"
+- reg : Specifies the I2C slave address of PMIC block.
+- interrupts : I2C device IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Example:
+
+ max77802: pmic@09 {
+ compatible = "maxim,max77802";
+ interrupt-parent = <&intc>;
+ interrupts = <26 IRQ_TYPE_NONE>;
+ reg = <0x09>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 9e6e2592e5c8..4ca6aab4273a 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -24,6 +24,10 @@ Optional properties:
- vcc10-supply: The input supply for LDO_REG6
- vcc11-supply: The input supply for LDO_REG8
- vcc12-supply: The input supply for SWITCH_REG2
+- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
+ for 2 host gpio's used for dvs. The format of the gpio specifier depends in
+ the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
+ very quickly with no slow ramp time.
Regulators: All the regulators of RK808 to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
@@ -55,7 +59,9 @@ Example:
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
reg = <0x1b>;
rockchip,system-power-controller;
wakeup-source;
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 6fcedba46ae9..37bf7f1aa70a 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -55,7 +55,7 @@ Optional nodes:
- linux,keymap: the definition can be found in
bindings/input/matrix-keymap.txt
- linux,no-autorepeat: do no enable autorepeat feature.
- - linux,wakeup: use any event on keypad as wakeup event.
+ - wakeup-source: use any event on keypad as wakeup event.
Example:
@@ -84,7 +84,6 @@ tc35893@44 {
keypad,num-columns = <8>;
keypad,num-rows = <8>;
linux,no-autorepeat;
- linux,wakeup;
linux,keymap = <0x0301006b
0x04010066
0x06040072
@@ -103,5 +102,6 @@ tc35893@44 {
0x01030039
0x07060069
0x050500d9>;
+ wakeup-source;
};
};
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 4461dc71cb10..862aa2f8837a 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -1,7 +1,8 @@
* Freescale Quad Serial Peripheral Interface(QuadSPI)
Required properties:
- - compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"
+ - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
+ "fsl,imx7d-qspi", "fsl,imx6ul-qspi"
- reg : the first contains the register location and length,
the second contains the memory mapping address and length
- reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
diff --git a/Documentation/devicetree/bindings/mtd/nxp-spifi.txt b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
new file mode 100644
index 000000000000..f8b6b250654e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
@@ -0,0 +1,58 @@
+* NXP SPI Flash Interface (SPIFI)
+
+NXP SPIFI is a specialized SPI interface for serial Flash devices.
+It supports one Flash device with 1-, 2- and 4-bits width in SPI
+mode 0 or 3. The controller operates in either command or memory
+mode. In memory mode the Flash is accessible from the CPU as
+normal memory.
+
+Required properties:
+ - compatible : Should be "nxp,lpc1773-spifi"
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - reg-names: Should contain the reg names "spifi" and "flash"
+ - interrupts : Should contain the interrupt for the device
+ - clocks : The clocks needed by the SPIFI controller
+ - clock-names : Should contain the clock names "spifi" and "reg"
+
+Optional properties:
+ - resets : phandle + reset specifier
+
+The SPI Flash must be a child of the SPIFI node and must have a
+compatible property as specified in bindings/mtd/jedec,spi-nor.txt
+
+Optionally it can also contain the following properties.
+ - spi-cpol : Controller only supports mode 0 and 3 so either
+ both spi-cpol and spi-cpha should be present or
+ none of them
+ - spi-cpha : See above
+ - spi-rx-bus-width : Used to select how many pins that are used
+ for input on the controller
+
+See bindings/spi/spi-bus.txt for more information.
+
+Example:
+spifi: spifi@40003000 {
+ compatible = "nxp,lpc1773-spifi";
+ reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+ reg-names = "spifi", "flash";
+ interrupts = <30>;
+ clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+ clock-names = "spifi", "reg";
+ resets = <&rgu 53>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "data";
+ reg = <0 0x200000>;
+ };
+ };
+};
+
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index 4f833e3c4f51..d9b655f11048 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -11,6 +11,7 @@ Required properties:
Optional properties:
+ - dmas: dma data channel, see dma.txt binding doc
- marvell,nand-enable-arbiter: Set to enable the bus arbiter
- marvell,nand-keep-config: Set to keep the NAND controller config as set
by the bootloader
@@ -32,6 +33,8 @@ Example:
compatible = "marvell,pxa3xx-nand";
reg = <0x43100000 90>;
interrupts = <45>;
+ dmas = <&pdma 97 0>;
+ dma-names = "data";
#address-cells = <1>;
marvell,nand-enable-arbiter;
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 33fe8462edf4..a9df21aaa154 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -2,7 +2,11 @@ TI SoC Ethernet Switch Controller Device Tree Bindings
------------------------------------------------------
Required properties:
-- compatible : Should be "ti,cpsw"
+- compatible : Should be one of the below:-
+ "ti,cpsw" for backward compatible
+ "ti,am335x-cpsw" for AM335x controllers
+ "ti,am4372-cpsw" for AM437x controllers
+ "ti,dra7-cpsw" for DRA7x controllers
- reg : physical base address and size of the cpsw
registers map
- interrupts : property with a value describing the interrupt
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index f0b4cd72411d..04e6bef3ac3f 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -44,9 +44,10 @@ Note that a port labelled "dsa" will imply checking for the uplink phandle
described below.
Optionnal property:
-- link : Should be a phandle to another switch's DSA port.
+- link : Should be a list of phandles to another switch's DSA port.
This property is only used when switches are being
- chained/cascaded together.
+ chained/cascaded together. This port is used as outgoing port
+ towards the phandle port, which can be more than one hop away.
- phy-handle : Phandle to a PHY on an external MDIO bus, not the
switch internal one. See
@@ -58,6 +59,10 @@ Optionnal property:
Documentation/devicetree/bindings/net/ethernet.txt
for details.
+- mii-bus : Should be a phandle to a valid MDIO bus device node.
+ This mii-bus will be used in preference to the
+ global dsa,mii-bus defined above, for this switch.
+
Optional subnodes:
- fixed-link : Fixed-link subnode describing a link to a non-MDIO
managed entity. See
@@ -96,10 +101,11 @@ Example:
label = "cpu";
};
- switch0uplink: port@6 {
+ switch0port6: port@6 {
reg = <6>;
label = "dsa";
- link = <&switch1uplink>;
+ link = <&switch1port0
+ &switch2port0>;
};
};
@@ -107,11 +113,31 @@ Example:
#address-cells = <1>;
#size-cells = <0>;
reg = <17 1>; /* MDIO address 17, switch 1 in tree */
+ mii-bus = <&mii_bus1>;
+
+ switch1port0: port@0 {
+ reg = <0>;
+ label = "dsa";
+ link = <&switch0port6>;
+ };
+ switch1port1: port@1 {
+ reg = <1>;
+ label = "dsa";
+ link = <&switch2port1>;
+ };
+ };
+
+ switch@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <18 2>; /* MDIO address 18, switch 2 in tree */
+ mii-bus = <&mii_bus1>;
- switch1uplink: port@0 {
+ switch2port0: port@0 {
reg = <0>;
label = "dsa";
- link = <&switch0uplink>;
+ link = <&switch1port1
+ &switch0port6>;
};
};
};
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index 41b3f3f864e8..5d88f37480b6 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -25,7 +25,11 @@ The following properties are common to the Ethernet controllers:
flow control thresholds.
- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This
is used for components that can have configurable fifo sizes.
+- managed: string, specifies the PHY management type. Supported values are:
+ "auto", "in-band-status". "auto" is the default, it usess MDIO for
+ management if fixed-link is not specified.
Child nodes of the Ethernet controller are typically the individual PHY devices
connected via the MDIO bus (sometimes the MDIO bus controller is separate).
They are described in the phy.txt file in this same directory.
+For non-MDIO PHY management see fixed-link.txt.
diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt
index 82bf7e0f47b6..ec5d889fe3d8 100644
--- a/Documentation/devicetree/bindings/net/fixed-link.txt
+++ b/Documentation/devicetree/bindings/net/fixed-link.txt
@@ -17,6 +17,8 @@ properties:
enabled.
* 'asym-pause' (boolean, optional), to indicate that asym_pause should
be enabled.
+* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read
+ to determine if the link is up.
Old, deprecated 'fixed-link' binding:
@@ -30,7 +32,7 @@ Old, deprecated 'fixed-link' binding:
- e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for
asymmetric pause
-Example:
+Examples:
ethernet@0 {
...
@@ -40,3 +42,13 @@ ethernet@0 {
};
...
};
+
+ethernet@1 {
+ ...
+ fixed-link {
+ speed = <1000>;
+ pause;
+ link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ ...
+};
diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt
index d0e6fa38f335..b30ab6b5cbfa 100644
--- a/Documentation/devicetree/bindings/net/keystone-netcp.txt
+++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt
@@ -130,7 +130,11 @@ Required properties:
Optional properties:
- efuse-mac: If this is 1, then the MAC address for the interface is
- obtained from the device efuse mac address register
+ obtained from the device efuse mac address register.
+ If this is 2, the two DWORDs occupied by the MAC address
+ are swapped. The netcp driver will swap the two DWORDs
+ back to the proper order when this property is set to 2
+ when it obtains the mac address from efuse.
- local-mac-address: the driver is designed to use the of_get_mac_address api
only if efuse-mac is 0. When efuse-mac is 0, the MAC
address is obtained from local-mac-address. If this
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
new file mode 100644
index 000000000000..fb1e75facf1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
@@ -0,0 +1,27 @@
+* Samsung S3FWRN5 NCI NFC Controller
+
+Required properties:
+- compatible: Should be "samsung,s3fwrn5-i2c".
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
+- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
+ sleep/wakeup control
+
+Example:
+
+&hsi2c_4 {
+ status = "okay";
+ s3fwrn5@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+
+ reg = <0x27>;
+
+ interrupt-parent = <&gpa1>;
+ interrupts = <3 0 0>;
+
+ s3fwrn5,en-gpios = <&gpf1 4 0>;
+ s3fwrn5,fw-gpios = <&gpj0 2 0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
index d707588ed734..d707588ed734 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
new file mode 100644
index 000000000000..525681b6dc39
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
@@ -0,0 +1,31 @@
+* STMicroelectronics SAS. ST NCI NFC Controller
+
+Required properties:
+- compatible: Should be "st,st21nfcb-spi"
+- spi-max-frequency: Maximum SPI frequency (<= 10000000).
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- reset-gpios: Output GPIO pin used to reset the ST21NFCB
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4):
+
+&mcspi4 {
+
+ status = "okay";
+
+ st21nfcb: st21nfcb@0 {
+
+ compatible = "st,st21nfcb-spi";
+
+ clock-frequency = <4000000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+
+ reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
new file mode 100644
index 000000000000..51f8d2eba8d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
@@ -0,0 +1,75 @@
+* Synopsys DWC Ethernet QoS IP version 4.10 driver (GMAC)
+
+
+Required properties:
+- compatible: Should be "snps,dwc-qos-ethernet-4.10"
+- reg: Address and length of the register set for the device
+- clocks: Phandles to the reference clock and the bus clock
+- clock-names: Should be "phy_ref_clk" for the reference clock and "apb_pclk"
+ for the bus clock.
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the core's combined interrupt signal
+- phy-mode: See ethernet.txt file in the same directory
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent
+- mac-address: See ethernet.txt in the same directory
+- local-mac-address: See ethernet.txt in the same directory
+- snps,en-lpi: If present it enables use of the AXI low-power interface
+- snps,write-requests: Number of write requests that the AXI port can issue.
+ It depends on the SoC configuration.
+- snps,read-requests: Number of read requests that the AXI port can issue.
+ It depends on the SoC configuration.
+- snps,burst-map: Bitmap of allowed AXI burst lengts, with the LSB
+ representing 4, then 8 etc.
+- snps,txpbl: DMA Programmable burst length for the TX DMA
+- snps,rxpbl: DMA Programmable burst length for the RX DMA
+- snps,en-tx-lpi-clockgating: Enable gating of the MAC TX clock during
+ TX low-power mode.
+- phy-handle: See ethernet.txt file in the same directory
+- mdio device tree subnode: When the GMAC has a phy connected to its local
+ mdio, there must be device tree subnode with the following
+ required properties:
+ - compatible: Must be "snps,dwc-qos-ethernet-mdio".
+ - #address-cells: Must be <1>.
+ - #size-cells: Must be <0>.
+
+ For each phy on the mdio bus, there must be a node with the following
+ fields:
+
+ - reg: phy id used to communicate to phy.
+ - device_type: Must be "ethernet-phy".
+ - fixed-mode device tree subnode: see fixed-link.txt in the same directory
+
+Examples:
+ethernet2@40010000 {
+ clock-names = "phy_ref_clk", "apb_pclk";
+ clocks = <&clkc 17>, <&clkc 15>;
+ compatible = "snps,dwc-qos-ethernet-4.10";
+ interrupt-parent = <&intc>;
+ interrupts = <0x0 0x1e 0x4>;
+ reg = <0x40010000 0x4000>;
+ phy-handle = <&phy2>;
+ phy-mode = "gmii";
+
+ snps,en-tx-lpi-clockgating;
+ snps,en-lpi;
+ snps,write-requests = <2>;
+ snps,read-requests = <16>;
+ snps,burst-map = <0x7>;
+ snps,txpbl = <8>;
+ snps,rxpbl = <2>;
+
+ dma-coherent;
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ phy2: phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ device_type = "ethernet-phy";
+ reg = <0x1>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index fabdf64a5737..d543ed3f5363 100644
--- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -4,6 +4,10 @@ Required properties:
- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
- reg: Should contain registers location and length
+= Data cells =
+Are child nodes of qfprom, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
Example for sun4i:
sid@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt
new file mode 100644
index 000000000000..b52bc11e9597
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt
@@ -0,0 +1,80 @@
+= NVMEM(Non Volatile Memory) Data Device Tree Bindings =
+
+This binding is intended to represent the location of hardware
+configuration data stored in NVMEMs like eeprom, efuses and so on.
+
+On a significant proportion of boards, the manufacturer has stored
+some data on NVMEM, for the OS to be able to retrieve these information
+and act upon it. Obviously, the OS has to know about where to retrieve
+these data from, and where they are stored on the storage device.
+
+This document is here to document this.
+
+= Data providers =
+Contains bindings specific to provider drivers and data cells as children
+of this node.
+
+Optional properties:
+ read-only: Mark the provider as read only.
+
+= Data cells =
+These are the child nodes of the provider which contain data cell
+information like offset and size in nvmem provider.
+
+Required properties:
+reg: specifies the offset in byte within the storage device.
+
+Optional properties:
+
+bits: Is pair of bit location and number of bits, which specifies offset
+ in bit and number of bits within the address range specified by reg property.
+ Offset takes values from 0-7.
+
+For example:
+
+ /* Provider */
+ qfprom: qfprom@00700000 {
+ ...
+
+ /* Data cells */
+ tsens_calibration: calib@404 {
+ reg = <0x404 0x10>;
+ };
+
+ tsens_calibration_bckp: calib_bckp@504 {
+ reg = <0x504 0x11>;
+ bits = <6 128>
+ };
+
+ pvs_version: pvs-version@6 {
+ reg = <0x6 0x2>
+ bits = <7 2>
+ };
+
+ speed_bin: speed-bin@c{
+ reg = <0xc 0x1>;
+ bits = <2 3>;
+
+ };
+ ...
+ };
+
+= Data consumers =
+Are device nodes which consume nvmem data cells/providers.
+
+Required-properties:
+nvmem-cells: list of phandle to the nvmem data cells.
+nvmem-cell-names: names for the each nvmem-cells specified. Required if
+ nvmem-cells is used.
+
+Optional-properties:
+nvmem : list of phandles to nvmem providers.
+nvmem-names: names for the each nvmem provider. required if nvmem is used.
+
+For example:
+
+ tsens {
+ ...
+ nvmem-cells = <&tsens_calibration>;
+ nvmem-cell-names = "calibration";
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt
new file mode 100644
index 000000000000..4ad68b7f5c18
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt
@@ -0,0 +1,35 @@
+= Qualcomm QFPROM device tree bindings =
+
+This binding is intended to represent QFPROM which is found in most QCOM SOCs.
+
+Required properties:
+- compatible: should be "qcom,qfprom"
+- reg: Should contain registers location and length
+
+= Data cells =
+Are child nodes of qfprom, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+ qfprom: qfprom@00700000 {
+ compatible = "qcom,qfprom";
+ reg = <0x00700000 0x8000>;
+ ...
+ /* Data cells */
+ tsens_calibration: calib@404 {
+ reg = <0x4404 0x10>;
+ };
+ };
+
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+
+ tsens {
+ ...
+ nvmem-cells = <&tsens_calibration>;
+ nvmem-cell-names = "calibration";
+ };
diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 0d5e7c978121..0cb44dc21f97 100644
--- a/Documentation/devicetree/bindings/power/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -88,7 +88,7 @@ This defines voltage-current-frequency combinations along with other related
properties.
Required properties:
-- opp-hz: Frequency in Hz
+- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer.
Optional properties:
- opp-microvolt: voltage in micro Volts.
@@ -158,20 +158,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
opp-shared;
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
- opp-hz = <1100000000>;
+ opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
- opp-hz = <1200000000>;
+ opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <290000>;
turbo-mode;
@@ -237,20 +237,20 @@ independently.
*/
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
- opp-hz = <1100000000>;
+ opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
- opp-hz = <1200000000>;
+ opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000;
lock-latency-ns = <290000>;
@@ -313,20 +313,20 @@ DVFS state together.
opp-shared;
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
- opp-hz = <1100000000>;
+ opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
- opp-hz = <1200000000>;
+ opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000>;
clock-latency-ns = <290000>;
@@ -339,20 +339,20 @@ DVFS state together.
opp-shared;
opp10 {
- opp-hz = <1300000000>;
+ opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1045000 1050000 1055000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
opp-suspend;
};
opp11 {
- opp-hz = <1400000000>;
+ opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1075000>;
opp-microamp = <100000>;
clock-latency-ns = <400000>;
};
opp12 {
- opp-hz = <1500000000>;
+ opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1010000 1100000 1110000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
@@ -379,7 +379,7 @@ Example 4: Handling multiple regulators
opp-shared;
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000>, /* Supply 0 */
<960000>, /* Supply 1 */
<960000>; /* Supply 2 */
@@ -392,7 +392,7 @@ Example 4: Handling multiple regulators
/* OR */
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
<960000 965000 975000>; /* Supply 2 */
@@ -405,7 +405,7 @@ Example 4: Handling multiple regulators
/* OR */
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
<960000 965000 975000>; /* Supply 2 */
@@ -437,12 +437,12 @@ Example 5: Multiple OPP tables
opp-shared;
opp00 {
- opp-hz = <600000000>;
+ opp-hz = /bits/ 64 <600000000>;
...
};
opp01 {
- opp-hz = <800000000>;
+ opp-hz = /bits/ 64 <800000000>;
...
};
};
@@ -453,12 +453,12 @@ Example 5: Multiple OPP tables
opp-shared;
opp10 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
...
};
opp11 {
- opp-hz = <1100000000>;
+ opp-hz = /bits/ 64 <1100000000>;
...
};
};
diff --git a/Documentation/devicetree/bindings/panel/auo,b080uan01.txt b/Documentation/devicetree/bindings/panel/auo,b080uan01.txt
new file mode 100644
index 000000000000..bae0e2b51467
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/auo,b080uan01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101ean01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/lg,lg4573.txt b/Documentation/devicetree/bindings/panel/lg,lg4573.txt
new file mode 100644
index 000000000000..824441f4e95a
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/lg,lg4573.txt
@@ -0,0 +1,19 @@
+LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+Required properties:
+ - compatible: "lg,lg4573"
+ - reg: address of the panel on the SPI bus
+
+The panel must obey rules for SPI slave device specified in document [1].
+
+[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ lcd_panel: display@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lg,lg4573";
+ spi-max-frequency = <10000000>;
+ reg = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/panel/nec,nl4827hc19-05b.txt b/Documentation/devicetree/bindings/panel/nec,nl4827hc19-05b.txt
new file mode 100644
index 000000000000..8e1914d1edb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/nec,nl4827hc19-05b.txt
@@ -0,0 +1,7 @@
+NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "nec,nl4827hc19-05b"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t-7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t-7x0gp.txt
new file mode 100644
index 000000000000..ddf8e211d382
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t-7x0gp.txt
@@ -0,0 +1,7 @@
+OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+
+Required properties:
+- compatible: should be "okaya,rs800480t-7x0gp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 3d217911b313..60e25161f351 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -23,6 +23,9 @@ PCIe Designware Controller
interrupt-map-mask,
interrupt-map : as specified in ../designware-pcie.txt
+Optional Property:
+ - gpios : Should be added if a gpio line is required to drive PERST# line
+
Example:
axi {
compatible = "simple-bus";
diff --git a/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt
new file mode 100644
index 000000000000..bd61b467e30a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt
@@ -0,0 +1,26 @@
+NXP LPC18xx/43xx internal USB OTG PHY binding
+---------------------------------------------
+
+This file contains documentation for the internal USB OTG PHY found
+in NXP LPC18xx and LPC43xx SoCs.
+
+Required properties:
+- compatible : must be "nxp,lpc1850-usb-otg-phy"
+- clocks : must be exactly one entry
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- #phy-cells : must be 0 for this phy
+See: Documentation/devicetree/bindings/phy/phy-bindings.txt
+
+The phy node must be a child of the creg syscon node.
+
+Example:
+creg: syscon@40043000 {
+ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+ reg = <0x40043000 0x1000>;
+
+ usb0_otg_phy: phy@004 {
+ compatible = "nxp,lpc1850-usb-otg-phy";
+ clocks = <&ccu1 CLK_USB0>;
+ #phy-cells = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index 16528b9eb561..0cebf7454517 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -7,6 +7,8 @@ Required properties:
* allwinner,sun5i-a13-usb-phy
* allwinner,sun6i-a31-usb-phy
* allwinner,sun7i-a20-usb-phy
+ * allwinner,sun8i-a23-usb-phy
+ * allwinner,sun8i-a33-usb-phy
- reg : a list of offset + length pairs
- reg-names :
* "phy_ctrl"
@@ -17,12 +19,21 @@ Required properties:
- clock-names :
* "usb_phy" for sun4i, sun5i or sun7i
* "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
+ * "usb0_phy", "usb1_phy" for sun8i
- resets : a list of phandle + reset specifier pairs
- reset-names :
* "usb0_reset"
* "usb1_reset"
* "usb2_reset" for sun4i, sun6i or sun7i
+Optional properties:
+- usb0_id_det-gpios : gpio phandle for reading the otg id pin value
+- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus
+- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect
+- usb0_vbus-supply : regulator phandle for controller usb0 vbus
+- usb1_vbus-supply : regulator phandle for controller usb1 vbus
+- usb2_vbus-supply : regulator phandle for controller usb2 vbus
+
Example:
usbphy: phy@0x01c13400 {
#phy-cells = <1>;
@@ -32,6 +43,13 @@ Example:
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&usb_clk 8>;
clock-names = "usb_phy";
- resets = <&usb_clk 1>, <&usb_clk 2>;
- reset-names = "usb1_reset", "usb2_reset";
+ resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
};
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 305e3df3d9b1..9cf9446eaf2e 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -82,6 +82,9 @@ Optional properties:
- id: If there are multiple instance of the same type, in order to
differentiate between each instance "id" can be used (e.g., multi-lane PCIe
PHY). If "id" is not provided, it is set to default value of '1'.
+ - syscon-pllreset: Handle to system control region that contains the
+ CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
+ register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
This is usually a subnode of ocp2scp to which it is connected.
@@ -100,3 +103,16 @@ usb3phy@4a084400 {
"sysclk",
"refclk";
};
+
+sata_phy: phy@4A096000 {
+ compatible = "ti,phy-pipe3-sata";
+ reg = <0x4A096000 0x80>, /* phy_rx */
+ <0x4A096400 0x64>, /* phy_tx */
+ <0x4A096800 0x40>; /* pll_ctrl */
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_sata>;
+ clocks = <&sys_clkin1>, <&sata_ref_clk>;
+ clock-names = "sysclk", "refclk";
+ syscon-pllreset = <&scm_conf 0x3fc>;
+ #phy-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 9462ab7ddd1f..3c821cda1ad0 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -48,7 +48,7 @@ Optional subnode-properties:
Examples:
-pinctrl@01c20800 {
+pio: pinctrl@01c20800 {
compatible = "allwinner,sun5i-a13-pinctrl";
reg = <0x01c20800 0x400>;
#address-cells = <1>;
@@ -68,3 +68,38 @@ pinctrl@01c20800 {
allwinner,pull = <0>;
};
};
+
+
+GPIO and interrupt controller
+-----------------------------
+
+This hardware also acts as a GPIO controller and an interrupt
+controller.
+
+Consumers that would want to refer to one or the other (or both)
+should provide through the usual *-gpios and interrupts properties a
+cell with 3 arguments, first the number of the bank, then the pin
+inside that bank, and finally the flags for the GPIO/interrupts.
+
+Example:
+
+xio: gpio@38 {
+ compatible = "nxp,pcf8574a";
+ reg = <0x38>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&pio>;
+ interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
+
+reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt
new file mode 100644
index 000000000000..23ce8dc26990
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt
@@ -0,0 +1,86 @@
+Conexant Digicolor CX92755 General Purpose Pin Mapping
+
+This document describes the device tree binding of the pin mapping hardware
+modules in the Conexant Digicolor CX92755 SoCs. The CX92755 in one of the
+Digicolor series of SoCs.
+
+=== Pin Controller Node ===
+
+Required Properties:
+
+- compatible: Must be "cnxt,cx92755-pinctrl"
+- reg: Base address of the General Purpose Pin Mapping register block and the
+ size of the block.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Must be <2>. The first cell is the pin number and the
+ second cell is used to specify flags. See include/dt-bindings/gpio/gpio.h
+ for possible values.
+
+For example, the following is the bare minimum node:
+
+ pinctrl: pinctrl@f0000e20 {
+ compatible = "cnxt,cx92755-pinctrl";
+ reg = <0xf0000e20 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+As a pin controller device, in addition to the required properties, this node
+should also contain the pin configuration nodes that client devices reference,
+if any.
+
+For a general description of GPIO bindings, please refer to ../gpio/gpio.txt.
+
+=== Pin Configuration Node ===
+
+Each pin configuration node is a sub-node of the pin controller node and is a
+container of an arbitrary number of subnodes, called pin group nodes in this
+document.
+
+Please refer to the pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the definition of a
+"pin configuration node".
+
+=== Pin Group Node ===
+
+A pin group node specifies the desired pin mux for an arbitrary number of
+pins. The name of the pin group node is optional and not used.
+
+A pin group node only affects the properties specified in the node, and has no
+effect on any properties that are omitted.
+
+The pin group node accepts a subset of the generic pin config properties. For
+details generic pin config properties, please refer to pinctrl-bindings.txt
+and <include/linux/pinctrl/pinconfig-generic.h>.
+
+Required Pin Group Node Properties:
+
+- pins: Multiple strings. Specifies the name(s) of one or more pins to be
+ configured by this node. The format of a pin name string is "GP_xy", where x
+ is an uppercase character from 'A' to 'R', and y is a digit from 0 to 7.
+- function: String. Specifies the pin mux selection. Values must be one of:
+ "gpio", "client_a", "client_b", "client_c"
+
+Example:
+ pinctrl: pinctrl@f0000e20 {
+ compatible = "cnxt,cx92755-pinctrl";
+ reg = <0xf0000e20 0x100>;
+
+ uart0_default: uart0_active {
+ data_signals {
+ pins = "GP_O0", "GP_O1";
+ function = "client_b";
+ };
+ };
+ };
+
+ uart0: uart@f0000740 {
+ compatible = "cnxt,cx92755-usart";
+ ...
+ pinctrl-0 = <&uart0_default>;
+ pinctrl-names = "default";
+ };
+
+In the example above, a single pin group configuration node defines the
+"client select" for the Rx and Tx signals of uart0. The uart0 node references
+that pin configuration node using the &uart0_default phandle.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
new file mode 100644
index 000000000000..a81bbf37ed66
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6ul-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
index ed19991aad35..d7803a2a94e9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
@@ -7,8 +7,13 @@ of PMIC's from Qualcomm.
Usage: required
Value type: <string>
Definition: Should contain one of:
+ "qcom,pm8018-mpp",
+ "qcom,pm8038-mpp",
+ "qcom,pm8821-mpp",
"qcom,pm8841-mpp",
"qcom,pm8916-mpp",
+ "qcom,pm8917-mpp",
+ "qcom,pm8921-mpp",
"qcom,pm8941-mpp",
"qcom,pma8084-mpp",
@@ -77,12 +82,9 @@ to specify in a pin configuration subnode:
Value type: <string>
Definition: Specify the alternative function to be configured for the
specified pins. Valid values are:
- "normal",
- "paired",
- "dtest1",
- "dtest2",
- "dtest3",
- "dtest4"
+ "digital",
+ "analog",
+ "sink"
- bias-disable:
Usage: optional
@@ -127,12 +129,18 @@ to specify in a pin configuration subnode:
Definition: Selects the power source for the specified pins. Valid power
sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-- qcom,analog-mode:
+- qcom,analog-level:
Usage: optional
- Value type: <none>
- Definition: Selects Analog mode of operation: combined with input-enable
- and/or output-high, output-low MPP could operate as
- Bidirectional Logic, Analog Input, Analog Output.
+ Value type: <u32>
+ Definition: Selects the source for analog output. Valued values are
+ defined in <dt-binding/pinctrl/qcom,pmic-mpp.h>
+ PMIC_MPP_AOUT_LVL_*
+
+- qcom,dtest:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects which dtest rail to be routed in the various functions.
+ Valid values are 1-4
- qcom,amux-route:
Usage: optional
@@ -140,6 +148,10 @@ to specify in a pin configuration subnode:
Definition: Selects the source for analog input. Valid values are
defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
+- qcom,paired:
+ Usage: optional
+ Value type: <none>
+ Definition: Indicates that the pin should be operating in paired mode.
Example:
@@ -156,7 +168,7 @@ Example:
pm8841_default: default {
gpio {
pins = "mpp1", "mpp2", "mpp3", "mpp4";
- function = "normal";
+ function = "digital";
input-enable;
power-source = <PM8841_MPP_S3>;
};
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index 51cee44fc140..9496934528bd 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -58,12 +58,12 @@ are parsed through phandles and processed purely based on their content.
Pin Configuration Node Properties:
-- renesas,pins : An array of strings, each string containing the name of a pin.
-- renesas,groups : An array of strings, each string containing the name of a pin
+- pins : An array of strings, each string containing the name of a pin.
+- groups : An array of strings, each string containing the name of a pin
group.
-- renesas,function: A string containing the name of the function to mux to the
- pin group(s) specified by the renesas,groups property
+- function: A string containing the name of the function to mux to the pin
+ group(s) specified by the groups property.
Valid values for pin, group and function names can be found in the group and
function arrays of the PFC data file corresponding to the SoC
@@ -71,7 +71,9 @@ Pin Configuration Node Properties:
The pin configuration parameters use the generic pinconf bindings defined in
pinctrl-bindings.txt in this directory. The supported parameters are
-bias-disable, bias-pull-up and bias-pull-down.
+bias-disable, bias-pull-up, bias-pull-down and power-source. For pins that
+have a configurable I/O voltage, the power-source value should be the
+nominal I/O voltage in millivolts.
GPIO
@@ -141,19 +143,19 @@ Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
mmcif_pins: mmcif {
mux {
- renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
- renesas,function = "mmc0";
+ groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ function = "mmc0";
};
cfg {
- renesas,groups = "mmc0_data8_0";
- renesas,pins = "PORT279";
+ groups = "mmc0_data8_0";
+ pins = "PORT279";
bias-pull-up;
};
};
scifa4_pins: scifa4 {
- renesas,groups = "scifa4_data", "scifa4_ctrl";
- renesas,function = "scifa4";
+ groups = "scifa4_data", "scifa4_ctrl";
+ function = "scifa4";
};
};
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
index f63fcb3ed352..2213802435e0 100644
--- a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
@@ -3,7 +3,9 @@ ST Ericsson Nomadik pinmux controller
Required properties:
- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
"stericsson,stn8815-pinctrl"
-- reg: Should contain the register physical address and length of the PRCMU.
+- nomadik-gpio-chips: array of phandles to the corresponding GPIO chips
+ (these have the register ranges used by the pin controller).
+- prcm: phandle to the PRCMU managing the back end of this pin controller
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
@@ -74,7 +76,8 @@ Example board file extract:
pinctrl@80157000 {
compatible = "stericsson,db8500-pinctrl";
- reg = <0x80157000 0x2000>;
+ nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
+ prcm = <&prcmu>;
pinctrl-names = "default";
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 0f8ed3710c66..025b5e7df61c 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -48,7 +48,7 @@ Example 2:
#power-domain-cells = <1>;
};
- child: power-controller@12340000 {
+ child: power-controller@12341000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent 0>;
diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
new file mode 100644
index 000000000000..0e6d8754e7ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
@@ -0,0 +1,48 @@
+Qualcomm Coincell Charger:
+
+The hardware block controls charging for a coincell or capacitor that is
+used to provide power backup for certain features of the power management
+IC (PMIC)
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be: "qcom,pm8941-coincell"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: base address of the coincell charger registers
+
+- qcom,rset-ohms:
+ Usage: required
+ Value type: <u32>
+ Definition: resistance (in ohms) for current-limiting resistor
+ must be one of: 800, 1200, 1700, 2100
+
+- qcom,vset-millivolts:
+ Usage: required
+ Value type: <u32>
+ Definition: voltage (in millivolts) to apply for charging
+ must be one of: 2500, 3000, 3100, 3200
+
+- qcom,charger-disable:
+ Usage: optional
+ Value type: <boolean>
+ Definition: definining this property disables charging
+
+This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
+as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and
+../mfd/qcom-pm8xxx.txt
+
+Example:
+
+ pm8941@0 {
+ coincell@2800 {
+ compatible = "qcom,pm8941-coincell";
+ reg = <0x2800>;
+
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 8b70db103ca7..b8627e763dba 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -33,6 +33,8 @@ Required properties:
- compatible: should be one of:
- "rockchip,rk3188-io-voltage-domain" for rk3188
- "rockchip,rk3288-io-voltage-domain" for rk3288
+ - "rockchip,rk3368-io-voltage-domain" for rk3368
+ - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
- rockchip,grf: phandle to the syscon managing the "general register files"
@@ -64,6 +66,18 @@ Possible supplies for rk3288:
- sdcard-supply: The supply connected to SDMMC0_VDD.
- wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0.
+Possible supplies for rk3368:
+- audio-supply: The supply connected to APIO3_VDD.
+- dvp-supply: The supply connected to DVPIO_VDD.
+- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC
+- gpio30-supply: The supply connected to APIO1_VDD.
+- gpio1830 The supply connected to APIO4_VDD.
+- sdcard-supply: The supply connected to SDMMC0_VDD.
+- wifi-supply: The supply connected to APIO2_VDD. Also known as SDIO0.
+
+Possible supplies for rk3368 pmu-domains:
+- pmu-supply: The supply connected to PMUIO_VDD.
+- vop-supply: The supply connected to LCDC_VDD.
Example:
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
index 8832e8798912..647817527c88 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -6,14 +6,14 @@ PSC in UART mode
For PSC in UART mode the needed PSC serial devices
are specified by fsl,mpc5121-psc-uart nodes in the
fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
-Controller node fsl,mpc5121-psc-fifo is requered there:
+Controller node fsl,mpc5121-psc-fifo is required there:
-fsl,mpc5121-psc-uart nodes
+fsl,mpc512x-psc-uart nodes
--------------------------
Required properties :
- - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
- - cell-index : Index of the PSC in hardware
+ - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
+ Supported <soc>s: mpc5121, mpc5125
- reg : Offset and length of the register set for the PSC device
- interrupts : <a b> where a is the interrupt number of the
PSC FIFO Controller and b is a field that represents an
@@ -25,12 +25,21 @@ Recommended properties :
- fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
- fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+PSC in SPI mode
+---------------
-fsl,mpc5121-psc-fifo node
+Similar to the UART mode a PSC can be operated in SPI mode. The compatible used
+for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well.
+The required and recommended properties are identical to the
+fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible
+string.
+
+fsl,mpc512x-psc-fifo node
-------------------------
Required properties :
- - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - compatible : Should be "fsl,<soc>-psc-fifo"
+ Supported <soc>s: mpc5121, mpc5125
- reg : Offset and length of the register set for the PSC
FIFO Controller
- interrupts : <a b> where a is the interrupt number of the
@@ -39,6 +48,9 @@ Required properties :
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
+Recommended properties :
+ - clocks : specifies the clock needed to operate the fifo controller
+ - clock-names : name(s) for the clock(s) listed in clocks
Example for a board using PSC0 and PSC1 devices in serial mode:
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
new file mode 100644
index 000000000000..0532c46b3372
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
@@ -0,0 +1,18 @@
+Freescale Supplement configuration unit (SCFG)
+
+SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+
+Required properties:
+
+- compatible: should be "fsl,<chip>-scfg"
+- reg: should contain base address and length of SCFG memory-mapped
+registers
+
+Example:
+
+ scfg: global-utilities@fc000 {
+ compatible = "fsl,t1040-scfg";
+ reg = <0xfc000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt
index 3297c53cb915..7aa9b1fa6b21 100644
--- a/Documentation/devicetree/bindings/regulator/da9210.txt
+++ b/Documentation/devicetree/bindings/regulator/da9210.txt
@@ -5,6 +5,10 @@ Required properties:
- compatible: must be "dlg,da9210"
- reg: the i2c slave address of the regulator. It should be 0x68.
+Optional properties:
+
+- interrupts: a reference to the DA9210 interrupt, if available.
+
Any standard regulator properties can be used to configure the single da9210
DCDC.
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
index eb618907c7de..c620493e8dbe 100644
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -1,7 +1,7 @@
-* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator
Required properties:
-- compatible: "dlg,da9211" or "dlg,da9213".
+- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215"
- reg: I2C slave address, usually 0x68.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
@@ -66,3 +66,31 @@ Example 2) DA9213
};
};
};
+
+
+Example 3) DA9215
+ pmic: da9215@68 {
+ compatible = "dlg,da9215";
+ reg = <0x68>;
+ interrupts = <3 27>;
+
+ regulators {
+ BUCKA {
+ regulator-name = "VBUCKA";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <4000000>;
+ regulator-max-microamp = <7000000>;
+ enable-gpios = <&gpio 27 0>;
+ };
+ BUCKB {
+ regulator-name = "VBUCKB";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <4000000>;
+ regulator-max-microamp = <7000000>;
+ enable-gpios = <&gpio 17 0>;
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt
new file mode 100644
index 000000000000..0dded64d89d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77686.txt
@@ -0,0 +1,71 @@
+Binding for Maxim MAX77686 regulators
+
+This is a part of the device tree bindings of MAX77686 multi-function device.
+More information can be found in ../mfd/max77686.txt file.
+
+The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
+regulators that can be controlled over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+ under subnode named "voltage-regulators" using the following format.
+
+ regulator_name {
+ regulator-compatible = LDOn/BUCKn
+ standard regulator constraints....
+ };
+ refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ The regulator node's name should be initialized with a string
+to get matched with their hardware counterparts as follow:
+
+ -LDOn : for LDOs, where n can lie in range 1 to 26.
+ example: LDO1, LDO2, LDO26.
+ -BUCKn : for BUCKs, where n can lie in range 1 to 9.
+ example: BUCK1, BUCK5, BUCK9.
+
+ Regulators which can be turned off during system suspend:
+ -LDOn : 2, 6-8, 10-12, 14-16,
+ -BUCKn : 1-4.
+ Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+ LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
+ control. To turn this feature on this property must be added to the regulator
+ sub-node:
+ - maxim,ena-gpios : one GPIO specifier enable control (the gpio
+ flags are actually ignored and always
+ ACTIVE_HIGH is used)
+
+Example:
+
+ max77686: pmic@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 IRQ_TYPE_NONE>;
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
index 55efb24e5683..f80ea2fe27e6 100644
--- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
@@ -25,6 +25,12 @@ Optional properties:
-maxim,enable-frequency-shift: boolean, enable 9% frequency shift.
-maxim,enable-bias-control: boolean, enable bias control. By enabling this
startup delay can be reduce to 20us from 220us.
+-maxim,enable-etr: boolean, enable Enhanced Transient Response.
+-maxim,enable-high-etr-sensitivity: boolean, Enhanced transient response
+ circuit is enabled and set for high sensitivity. If this
+ property is available then etr will be enable default.
+
+Enhanced transient response (ETR) will affect the configuration of CKADV.
Example:
diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
new file mode 100644
index 000000000000..02649d8b3f5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
@@ -0,0 +1,35 @@
+Mediatek MT6311 Regulator Driver
+
+Required properties:
+- compatible: "mediatek,mt6311-regulator"
+- reg: I2C slave address, usually 0x6b.
+- regulators: List of regulators provided by this controller. It is named
+ to VDVFS and VBIASN.
+ The definition for each of these nodes is defined using the standard binding
+ for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+ VDVFS
+LDO:
+ VBIASN
+
+Example:
+ mt6311: pmic@6b {
+ compatible = "mediatek,mt6311-regulator";
+ reg = <0x6b>;
+
+ regulators {
+ mt6311_vcpu_reg: VDVFS {
+ regulator-name = "VDVFS";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <10000>;
+ };
+ mt6311_ldo_reg: VBIASN {
+ regulator-name = "VBIASN";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <800000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index ce91f61feb12..ed936f0f34f2 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -1,27 +1,68 @@
-pwm regulator bindings
+Bindings for the Generic PWM Regulator
+======================================
+
+Currently supports 2 modes of operation:
+
+Voltage Table: When in this mode, a voltage table (See below) of
+ predefined voltage <=> duty-cycle values must be
+ provided via DT. Limitations are that the regulator can
+ only operate at the voltages supplied in the table.
+ Intermediary duty-cycle values which would normally
+ allow finer grained voltage selection are ignored and
+ rendered useless. Although more control is given to
+ the user if the assumptions made in continuous-voltage
+ mode do not reign true.
+
+Continuous Voltage: This mode uses the regulator's maximum and minimum
+ supplied voltages specified in the
+ regulator-{min,max}-microvolt properties to calculate
+ appropriate duty-cycle values. This allows for a much
+ more fine grained solution when compared with
+ voltage-table mode above. This solution does make an
+ assumption that a %50 duty-cycle value will cause the
+ regulator voltage to run at half way between the
+ supplied max_uV and min_uV values.
Required properties:
-- compatible: Should be "pwm-regulator"
-- pwms: OF device-tree PWM specification (see PWM binding pwm.txt)
-- voltage-table: voltage and duty table, include 2 members in each set of
- brackets, first one is voltage(unit: uv), the next is duty(unit: percent)
+--------------------
+- compatible: Should be "pwm-regulator"
+
+- pwms: PWM specification (See: ../pwm/pwm.txt)
+
+Only required for Voltage Table Mode:
+- voltage-table: Voltage and Duty-Cycle table consisting of 2 cells
+ First cell is voltage in microvolts (uV)
+ Second cell is duty-cycle in percent (%)
+
+NB: To be clear, if voltage-table is provided, then the device will be used
+in Voltage Table Mode. If no voltage-table is provided, then the device will
+be used in Continuous Voltage Mode.
-Any property defined as part of the core regulator binding defined in
-regulator.txt can also be used.
+Any property defined as part of the core regulator binding can also be used.
+(See: ../regulator/regulator.txt)
-Example:
+Continuous Voltage Example:
pwm_regulator {
compatible = "pwm-regulator;
pwms = <&pwm1 0 8448 0>;
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+ };
+Voltage Table Example:
+ pwm_regulator {
+ compatible = "pwm-regulator;
+ pwms = <&pwm1 0 8448 0>;
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+
+ /* Voltage Duty-Cycle */
voltage-table = <1114000 0>,
<1095000 10>,
<1076000 20>,
<1056000 30>,
<1036000 40>,
<1016000 50>;
-
- regulator-min-microvolt = <1016000>;
- regulator-max-microvolt = <1114000>;
- regulator-name = "vdd_logic";
};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 75b4604bad07..d00bfd8624a5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -91,13 +91,65 @@ see regulator.txt - with additional custom properties described below:
- regulator-initial-mode:
Usage: optional
Value type: <u32>
- Descrption: 1 = Set initial mode to high power mode (HPM), also referred
- to as NPM. HPM consumes more ground current than LPM, but
+ Description: 2 = Set initial mode to auto mode (automatically select
+ between HPM and LPM); not available on boost type
+ regulators.
+
+ 1 = Set initial mode to high power mode (HPM), also referred
+ to as NPM. HPM consumes more ground current than LPM, but
it can source significantly higher load current. HPM is not
available on boost type regulators. For voltage switch type
regulators, HPM implies that over current protection and
- soft start are active all the time. 0 = Set initial mode to
- low power mode (LPM).
+ soft start are active all the time.
+
+ 0 = Set initial mode to low power mode (LPM).
+
+- qcom,ocp-max-retries:
+ Usage: optional
+ Value type: <u32>
+ Description: Maximum number of times to try toggling a voltage switch
+ off and back on as a result of consecutive over current
+ events.
+
+- qcom,ocp-retry-delay:
+ Usage: optional
+ Value type: <u32>
+ Description: Time to delay in milliseconds between each voltage switch
+ toggle after an over current event takes place.
+
+- qcom,pin-ctrl-enable:
+ Usage: optional
+ Value type: <u32>
+ Description: Bit mask specifying which hardware pins should be used to
+ enable the regulator, if any; supported bits are:
+ 0 = ignore all hardware enable signals
+ BIT(0) = follow HW0_EN signal
+ BIT(1) = follow HW1_EN signal
+ BIT(2) = follow HW2_EN signal
+ BIT(3) = follow HW3_EN signal
+
+- qcom,pin-ctrl-hpm:
+ Usage: optional
+ Value type: <u32>
+ Description: Bit mask specifying which hardware pins should be used to
+ force the regulator into high power mode, if any;
+ supported bits are:
+ 0 = ignore all hardware enable signals
+ BIT(0) = follow HW0_EN signal
+ BIT(1) = follow HW1_EN signal
+ BIT(2) = follow HW2_EN signal
+ BIT(3) = follow HW3_EN signal
+ BIT(4) = follow PMIC awake state
+
+- qcom,vs-soft-start-strength:
+ Usage: optional
+ Value type: <u32>
+ Description: This property sets the soft start strength for voltage
+ switch type regulators; supported values are:
+ 0 = 0.05 uA
+ 1 = 0.25 uA
+ 2 = 0.55 uA
+ 3 = 0.75 uA
Example:
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index db88feb28c03..24bd422cecd5 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -42,6 +42,7 @@ Optional properties:
- regulator-system-load: Load in uA present on regulator that is not captured by
any consumer request.
- regulator-pull-down: Enable pull down resistor when the regulator is disabled.
+- regulator-over-current-protection: Enable over current protection.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
diff --git a/Documentation/devicetree/bindings/reset/ath79-reset.txt b/Documentation/devicetree/bindings/reset/ath79-reset.txt
new file mode 100644
index 000000000000..4c56330bf398
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ath79-reset.txt
@@ -0,0 +1,20 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset"
+ as fallback
+- reg: Base address and size of the controllers memory area
+- #reset-cells : Specifies the number of cells needed to encode reset
+ line, should be 1
+
+Example:
+
+ reset-controller@1806001c {
+ compatible = "qca,ar9132-reset", "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
new file mode 100644
index 000000000000..b4e96a278445
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
@@ -0,0 +1,84 @@
+NXP LPC1850 Reset Generation Unit (RGU)
+========================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "nxp,lpc1850-rgu"
+- reg: register base and length
+- clocks: phandle and clock specifier to RGU clocks
+- clock-names: should contain "delay" and "reg"
+- #reset-cells: should be 1
+
+See table below for valid peripheral reset numbers. Numbers not
+in the table below are either reserved or not applicable for
+normal operation.
+
+Reset Peripheral
+ 9 System control unit (SCU)
+ 12 ARM Cortex-M0 subsystem core (LPC43xx only)
+ 13 CPU core
+ 16 LCD controller
+ 17 USB0
+ 18 USB1
+ 19 DMA
+ 20 SDIO
+ 21 External memory controller (EMC)
+ 22 Ethernet
+ 25 Flash bank A
+ 27 EEPROM
+ 28 GPIO
+ 29 Flash bank B
+ 32 Timer0
+ 33 Timer1
+ 34 Timer2
+ 35 Timer3
+ 36 Repetitive Interrupt timer (RIT)
+ 37 State Configurable Timer (SCT)
+ 38 Motor control PWM (MCPWM)
+ 39 QEI
+ 40 ADC0
+ 41 ADC1
+ 42 DAC
+ 44 USART0
+ 45 UART1
+ 46 USART2
+ 47 USART3
+ 48 I2C0
+ 49 I2C1
+ 50 SSP0
+ 51 SSP1
+ 52 I2S0 and I2S1
+ 53 Serial Flash Interface (SPIFI)
+ 54 C_CAN1
+ 55 C_CAN0
+ 56 ARM Cortex-M0 application core (LPC4370 only)
+ 57 SGPIO (LPC43xx only)
+ 58 SPI (LPC43xx only)
+ 60 ADCHS (12-bit ADC) (LPC4370 only)
+
+Refer to NXP LPC18xx or LPC43xx user manual for more details about
+the reset signals and the connected block/peripheral.
+
+Reset provider example:
+rgu: reset-controller@40053000 {
+ compatible = "nxp,lpc1850-rgu";
+ reg = <0x40053000 0x1000>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "delay", "reg";
+ #reset-cells = <1>;
+};
+
+Reset consumer example:
+mac: ethernet@40010000 {
+ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+ reg = <0x40010000 0x2000>;
+ interrupts = <5>;
+ interrupt-names = "macirq";
+ clocks = <&ccu1 CLK_CPU_ETHERNET>;
+ clock-names = "stmmaceth";
+ resets = <&rgu 22>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
index 32c1c8bfd5dc..98c9f560e5c5 100644
--- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
@@ -3,6 +3,7 @@ Altera SOCFPGA Reset Manager
Required properties:
- compatible : "altr,rst-mgr"
- reg : Should contain 1 register ranges(address and length)
+- altr,modrst-offset : Should contain the offset of the first modrst register.
- #reset-cells: 1
Example:
@@ -10,4 +11,5 @@ Example:
#reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x1000>;
+ altr,modrst-offset = <0x10>;
};
diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
index 54ae9f747e45..9ca27761f811 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
@@ -39,4 +39,4 @@ Example:
};
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih407-resets.h
+include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
index 5ab26b7e9d35..1cfd21d1dfa1 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
@@ -43,5 +43,5 @@ example:
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih415-resets.h
-include/dt-bindings/reset-controller/stih416-resets.h
+include/dt-bindings/reset/stih415-resets.h
+include/dt-bindings/reset/stih416-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
index a8d3d3c25ca2..891a2fd85ed6 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
@@ -42,5 +42,5 @@ example:
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih415-resets.h
-include/dt-bindings/reset-controller/stih416-resets.h
+include/dt-bindings/reset/stih415-resets.h
+include/dt-bindings/reset/stih416-resets.h
diff --git a/Documentation/devicetree/bindings/reset/zynq-reset.txt b/Documentation/devicetree/bindings/reset/zynq-reset.txt
new file mode 100644
index 000000000000..5860120e3064
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/zynq-reset.txt
@@ -0,0 +1,68 @@
+Xilinx Zynq Reset Manager
+
+The Zynq AP-SoC has several different resets.
+
+See Chapter 26 of the Zynq TRM (UG585) for more information about Zynq resets.
+
+Required properties:
+- compatible: "xlnx,zynq-reset"
+- reg: SLCR offset and size taken via syscon <0x200 0x48>
+- syscon: <&slcr>
+ This should be a phandle to the Zynq's SLCR registers.
+- #reset-cells: Must be 1
+
+The Zynq Reset Manager needs to be a childnode of the SLCR.
+
+Example:
+ rstc: rstc@200 {
+ compatible = "xlnx,zynq-reset";
+ reg = <0x200 0x48>;
+ #reset-cells = <1>;
+ syscon = <&slcr>;
+ };
+
+Reset outputs:
+ 0 : soft reset
+ 32 : ddr reset
+ 64 : topsw reset
+ 96 : dmac reset
+ 128: usb0 reset
+ 129: usb1 reset
+ 160: gem0 reset
+ 161: gem1 reset
+ 164: gem0 rx reset
+ 165: gem1 rx reset
+ 166: gem0 ref reset
+ 167: gem1 ref reset
+ 192: sdio0 reset
+ 193: sdio1 reset
+ 196: sdio0 ref reset
+ 197: sdio1 ref reset
+ 224: spi0 reset
+ 225: spi1 reset
+ 226: spi0 ref reset
+ 227: spi1 ref reset
+ 256: can0 reset
+ 257: can1 reset
+ 258: can0 ref reset
+ 259: can1 ref reset
+ 288: i2c0 reset
+ 289: i2c1 reset
+ 320: uart0 reset
+ 321: uart1 reset
+ 322: uart0 ref reset
+ 323: uart1 ref reset
+ 352: gpio reset
+ 384: lqspi reset
+ 385: qspi ref reset
+ 416: smc reset
+ 417: smc ref reset
+ 448: ocm reset
+ 512: fpga0 out reset
+ 513: fpga1 out reset
+ 514: fpga2 out reset
+ 515: fpga3 out reset
+ 544: a9 reset 0
+ 545: a9 reset 1
+ 552: peri reset
+
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
index 34c1505774bf..5d3791e789c6 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
@@ -5,6 +5,7 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: rtc alarm/event interrupt
+- clocks: phandle to input clock.
Example:
@@ -12,4 +13,5 @@ rtc@fffffe00 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffe00 0x100>;
interrupts = <1 4 7>;
+ clocks = <&clk32k>;
};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
new file mode 100644
index 000000000000..5bcd31d995b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
@@ -0,0 +1,26 @@
+* Real Time Clock of the i.MX SoCs
+
+RTC controller for the i.MX SoCs
+
+Required properties:
+- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the RTC.
+- clocks: should contain two entries:
+ * one for the input reference
+ * one for the the SoC RTC
+- clock-names: should contain:
+ * "ref" for the input reference clock
+ * "ipg" for the SoC RTC clock
+
+Example:
+
+rtc@10007000 {
+ compatible = "fsl,imx21-rtc";
+ reg = <0x10007000 0x1000>;
+ interrupts = <22>;
+ clocks = <&clks IMX27_CLK_CKIL>,
+ <&clks IMX27_CLK_RTC_IPG_GATE>;
+ clock-names = "ref", "ipg";
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
index 4ba4dbd34289..43a83668673a 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -8,6 +8,7 @@ Required properties:
Wakeup generation for event Alarm. It can also be
used to control an external PMIC via the
pmic_power_en pin.
+ - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
- reg: Address range of rtc register set
- interrupts: rtc timer, alarm interrupts in order
- interrupt-parent: phandle for the interrupt controller
diff --git a/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt b/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt
index 73407f502e4e..daf88265df32 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt
@@ -1,20 +1,23 @@
STMicroelectronics Low Power Controller (LPC) - RTC
===================================================
-LPC currently supports Watchdog OR Real Time Clock functionality.
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
[See: ../watchdog/st_lpc_wdt.txt for Watchdog options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
Required properties
-- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc"
- "st,stih415-lpc" "st,stid127-lpc"
+- compatible : Must be: "st,stih407-lpc"
- reg : LPC registers base address + size
- interrupts : LPC interrupt line number and associated flags
- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt)
-- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
- ST_LPC_MODE_WDT [1]. One (and only one) mode must be
- selected.
+- st,lpc-mode : The LPC can run either one of three modes:
+ ST_LPC_MODE_RTC [0]
+ ST_LPC_MODE_WDT [1]
+ ST_LPC_MODE_CLKSRC [2]
+ One (and only one) mode must be selected.
Example:
lpc@fde05000 {
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 90787aa2e648..e6e6142e33ac 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -22,6 +22,8 @@ Optional properties:
memory peripheral interface and USART DMA channel ID, FIFO configuration.
Refer to dma.txt and atmel-dma.txt for details.
- dma-names: "rx" for RX channel, "tx" for TX channel.
+- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
+ capable USARTs.
<chip> compatible description:
- at91rm9200: legacy USART support
@@ -57,4 +59,5 @@ Example:
dmas = <&dma0 2 0x3>,
<&dma0 2 0x204>;
dma-names = "tx", "rx";
+ atmel,fifo-size = <32>;
};
diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
index ebcbb62c0a76..51b3c9e80ad9 100644
--- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
+++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
@@ -6,7 +6,7 @@ Required properties:
- interrupts: device interrupt
Optional properties:
-- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+- {dtr,dsr,rng,dcd}-gpios: specify a GPIO for DTR/DSR/RI/DCD
line respectively.
Example:
@@ -16,4 +16,8 @@ serial@b00260000 {
reg = <0xb0026000 0x1000>;
interrupts = <68>;
status = "disabled";
+ dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&sysgpio 3 GPIO_ACTIVE_LOW>;
};
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 8d63f1da07aa..2d47add34765 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -5,10 +5,12 @@ Required properties:
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
+ * "mediatek,mt6795-uart" for MT6795 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
- * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582,
- MT6577)
+ * "mediatek,mt6580-uart" for MT6580 compatible UARTS
+ * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6795,
+ MT6589, MT6582, MT6580, MT6577)
- reg: The base address of the UART register bank.
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 54c2a155c783..7a71b5de77d6 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -4,6 +4,9 @@ Required properties:
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- compatible : should be "ti,am4372-uart" for AM437x controllers
+- compatible : should be "ti,am3352-uart" for AM335x controllers
+- compatible : should be "ti,dra742-uart" for DRA7x controllers
- reg : address and length of the register space
- interrupts or interrupts-extended : Should contain the uart interrupt
specifier or both the interrupt
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
new file mode 100644
index 000000000000..c0511142b39c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -0,0 +1,41 @@
+MediaTek SCPSYS
+===============
+
+The System Control Processor System (SCPSYS) has several power management
+related tasks in the system. The tasks include thermal measurement, dynamic
+voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control.
+The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
+domain control.
+
+The driver implements the Generic PM domain bindings described in
+power/power_domain.txt. It provides the power domains defined in
+include/dt-bindings/power/mt8173-power.h.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-scpsys"
+- #power-domain-cells: Must be 1
+- reg: Address range of the SCPSYS unit
+- infracfg: must contain a phandle to the infracfg controller
+- clock, clock-names: clocks according to the common clock binding.
+ The clocks needed "mm" and "mfg". These are the
+ clocks which hardware needs to be enabled before
+ enabling certain power domains.
+
+Example:
+
+ scpsys: scpsys@10006000 {
+ #power-domain-cells = <1>;
+ compatible = "mediatek,mt8173-scpsys";
+ reg = <0 0x10006000 0 0x1000>;
+ infracfg = <&infracfg>;
+ clocks = <&clk26m>,
+ <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mfg", "mm";
+ };
+
+Example consumer:
+
+ afe: mt8173-afe-pcm@11220000 {
+ compatible = "mediatek,mt8173-afe-pcm";
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt
new file mode 100644
index 000000000000..e27f5c4c54fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt
@@ -0,0 +1,117 @@
+Qualcomm Resource Power Manager (RPM) over SMD
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-msm8974"
+
+- qcom,smd-channels:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Shared Memory channel used for communication with the RPM
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Regulators
+
+Regulator nodes are identified by their compatible:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8841-regulators"
+ "qcom,rpm-pm8941-regulators"
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+ Usage: optional (pm8841 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_l1_l3-supply:
+- vdd_l2_lvs1_2_3-supply:
+- vdd_l4_l11-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l14_l15-supply:
+- vdd_l8_l16_l18_l19-supply:
+- vdd_l9_l10_l17_l22-supply:
+- vdd_l13_l20_l23_l24-supply:
+- vdd_l21-supply:
+- vin_5vs-supply:
+ Usage: optional (pm8941 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+The regulator node houses sub-nodes for each regulator within the device. Each
+sub-node is identified using the node's name, with valid values listed for each
+of the pmics below.
+
+pm8841:
+ s1, s2, s3, s4, s5, s6, s7, s8
+
+pm8941:
+ s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+ l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
+ lvs3, 5vs1, 5vs2
+
+The content of each sub-node is defined by the standard binding for regulators -
+see regulator.txt.
+
+= EXAMPLE
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+ vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_boost: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ };
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
new file mode 100644
index 000000000000..f65c76db9859
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
@@ -0,0 +1,79 @@
+Qualcomm Shared Memory Driver (SMD) binding
+
+This binding describes the Qualcomm Shared Memory Driver, a fifo based
+communication channel for sending data between the various subsystems in
+Qualcomm platforms.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,smd"
+
+= EDGES
+
+Each subnode of the SMD node represents a remote subsystem or a remote
+processor of some sort - or in SMD language an "edge". The name of the edges
+are not important.
+The edge is described by the following properties:
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the IRQ used by the remote processor to
+ signal this processor about communication related updates
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the remote processor:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,smd-edge:
+ Usage: required
+ Value type: <u32>
+ Definition: the identifier of the remote processor in the smd channel
+ allocation table
+
+= SMD DEVICES
+
+In turn, subnodes of the "edges" represent devices tied to SMD channels on that
+"edge". The names of the devices are not important. The properties of these
+nodes are defined by the individual bindings for the SMD devices - but must
+contain the following property:
+
+- qcom,smd-channels:
+ Usage: required
+ Value type: <stringlist>
+ Definition: a list of channels tied to this device, used for matching
+ the device to channels
+
+= EXAMPLE
+
+The following example represents a smd node, with one edge representing the
+"rpm" subsystem. For the "rpm" subsystem we have a device tied to the
+"rpm_request" channel.
+
+ apcs: syscon@f9011000 {
+ compatible = "syscon";
+ reg = <0xf9011000 0x1000>;
+ };
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ ...
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/cs4349.txt b/Documentation/devicetree/bindings/sound/cs4349.txt
new file mode 100644
index 000000000000..54c117b59dba
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4349.txt
@@ -0,0 +1,19 @@
+CS4349 audio CODEC
+
+Required properties:
+
+ - compatible : "cirrus,cs4349"
+
+ - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+ - reset-gpios : a GPIO spec for the reset pin.
+
+Example:
+
+codec: cs4349@48 {
+ compatible = "cirrus,cs4349";
+ reg = <0x48>;
+ reset-gpios = <&gpio 54 0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt
new file mode 100644
index 000000000000..b02e3a6c0fef
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ics43432.txt
@@ -0,0 +1,17 @@
+Invensense ICS-43432 MEMS microphone with I2S output.
+
+There are no software configuration options for this device, indeed, the only
+host connection is the I2S interface. Apart from requirements on clock
+frequency (460 kHz to 3.379 MHz according to the data sheet) there must be
+64 clock cycles in each stereo output frame; 24 of the 32 available bits
+contain audio data. A hardware pin determines if the device outputs data
+on the left or right channel of the I2S frame.
+
+Required properties:
+ - compatible : Must be "invensense,ics43432"
+
+Example:
+
+ ics43432: ics43432 {
+ compatible = "invensense,ics43432";
+ };
diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt
index a7a149a236e5..28645a2ff885 100644
--- a/Documentation/devicetree/bindings/sound/max98357a.txt
+++ b/Documentation/devicetree/bindings/sound/max98357a.txt
@@ -4,7 +4,11 @@ This node models the Maxim MAX98357A DAC.
Required properties:
- compatible : "maxim,max98357a"
-- sdmode-gpios : GPIO specifier for the GPIO -> DAC SDMODE pin
+
+Optional properties:
+- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin.
+ If this option is not specified then driver does not manage
+ the pin state (e.g. chip is always on).
Example:
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
index 13e2ef496724..275c6ea356f6 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
@@ -8,10 +8,10 @@ Required properties:
- interrupts : The interrupt from the HDA controller.
- clocks : Must contain an entry for each required entry in clock-names.
See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+- clock-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
-- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
Example:
@@ -24,7 +24,7 @@ hda@0,70030000 {
<&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
- <&tegra_car 128>; /* hda2hdmi */
- <&tegra_car 111>, /* hda2codec_2x */
+ <&tegra_car 128>, /* hda2hdmi */
+ <&tegra_car 111>; /* hda2codec_2x */
reset-names = "hda", "hda2hdmi", "hda2codec_2x";
};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index b6b3a786855f..1173395b5e5c 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -18,6 +18,12 @@ Required properties:
- rcar_sound,src : Should contain SRC feature.
The number of SRC subnode should be same as HW.
see below for detail.
+- rcar_sound,ctu : Should contain CTU feature.
+ The number of CTU subnode should be same as HW.
+ see below for detail.
+- rcar_sound,mix : Should contain MIX feature.
+ The number of MIX subnode should be same as HW.
+ see below for detail.
- rcar_sound,dvc : Should contain DVC feature.
The number of DVC subnode should be same as HW.
see below for detail.
@@ -90,6 +96,22 @@ rcar_sound: sound@ec500000 {
};
};
+ rcar_sound,mix {
+ mix0: mix@0 { };
+ mix1: mix@1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu@0 { };
+ ctu01: ctu@1 { };
+ ctu02: ctu@2 { };
+ ctu03: ctu@3 { };
+ ctu10: ctu@4 { };
+ ctu11: ctu@5 { };
+ ctu12: ctu@6 { };
+ ctu13: ctu@7 { };
+ };
+
rcar_sound,src {
src0: src@0 {
interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt
index c64155027288..962748a8d919 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible : "renesas,rsrc-card,<board>"
Examples with soctypes are:
+ - "renesas,rsrc-card"
- "renesas,rsrc-card,lager"
- "renesas,rsrc-card,koelsch"
Optional properties:
@@ -29,6 +30,12 @@ Optional subnode properties:
- frame-inversion : bool property. Add this if the
dai-link uses frame clock inversion.
- convert-rate : platform specified sampling rate convert
+- audio-prefix : see audio-routing
+- audio-routing : A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the connection's sink,
+ the second being the connection's source. Valid names for sources.
+ use audio-prefix if some components is using same sink/sources naming.
+ it can be used if compatible was "renesas,rsrc-card";
Required CPU/CODEC subnodes properties:
diff --git a/Documentation/devicetree/bindings/sound/rockchip-max98090.txt b/Documentation/devicetree/bindings/sound/rockchip-max98090.txt
new file mode 100644
index 000000000000..a805aa99ad75
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-max98090.txt
@@ -0,0 +1,19 @@
+ROCKCHIP with MAX98090 CODEC
+
+Required properties:
+- compatible: "rockchip,rockchip-audio-max98090"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+ connected to the CODEC
+- rockchip,audio-codec: The phandle of the MAX98090 audio codec
+- rockchip,headset-codec: The phandle of Ext chip for jack detection
+
+Example:
+
+sound {
+ compatible = "rockchip,rockchip-audio-max98090";
+ rockchip,model = "ROCKCHIP-I2S";
+ rockchip,i2s-controller = <&i2s>;
+ rockchip,audio-codec = <&max98090>;
+ rockchip,headset-codec = <&headsetcodec>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt b/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt
new file mode 100644
index 000000000000..411a62b3ff41
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt
@@ -0,0 +1,17 @@
+ROCKCHIP with RT5645/RT5650 CODECS
+
+Required properties:
+- compatible: "rockchip,rockchip-audio-rt5645"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+ connected to the CODEC
+- rockchip,audio-codec: The phandle of the RT5645/RT5650 audio codec
+
+Example:
+
+sound {
+ compatible = "rockchip,rockchip-audio-rt5645";
+ rockchip,model = "ROCKCHIP-I2S";
+ rockchip,i2s-controller = <&i2s>;
+ rockchip,audio-codec = <&rt5645>;
+};
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
new file mode 100644
index 000000000000..028fa1c82f50
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -0,0 +1,155 @@
+STMicroelectronics sti ASoC cards
+
+The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas
+codec or external codecs.
+
+sti sound drivers allows to expose sti SoC audio interface through the
+generic ASoC simple card. For details about sound card declaration please refer to
+Documentation/devicetree/bindings/sound/simple-card.txt.
+
+1) sti-uniperiph-dai: audio dai device.
+---------------------------------------
+
+Required properties:
+ - compatible: "st,sti-uni-player" or "st,sti-uni-reader"
+
+ - st,syscfg: phandle to boot-device system configuration registers
+
+ - clock-names: name of the clocks listed in clocks property in the same order
+
+ - reg: CPU DAI IP Base address and size entries, listed in same
+ order than the CPU_DAI properties.
+
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+
+ - interrupts: CPU_DAI interrupt line, listed in the same order than the
+ CPU_DAI properties.
+
+ - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same
+ order than the CPU_DAI properties.
+
+ - dma-names: identifier string for each DMA request line in the dmas property.
+ "tx" for "st,sti-uni-player" compatibility
+ "rx" for "st,sti-uni-reader" compatibility
+
+ - version: IP version integrated in SOC.
+
+ - dai-name: DAI name that describes the IP.
+
+Required properties ("st,sti-uni-player" compatibility only):
+ - clocks: CPU_DAI IP clock source, listed in the same order than the
+ CPU_DAI properties.
+
+ - uniperiph-id: internal SOC IP instance ID.
+
+ - IP mode: IP working mode depending on associated codec.
+ "HDMI" connected to HDMI codec IP and IEC HDMI formats.
+ "SPDIF"connected to SPDIF codec and support SPDIF formats.
+ "PCM" PCM standard mode for I2S or TDM bus.
+
+Optional properties:
+ - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
+ external codecs connection.
+
+ - pinctrl-names: should contain only one value - "default".
+
+Example:
+
+ sti_uni_player2: sti-uni-player@2 {
+ compatible = "st,sti-uni-player";
+ status = "okay";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+ reg = <0x8D82000 0x158>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 4 0 1>;
+ dai-name = "Uni Player #1 (DAC)";
+ dma-names = "tx";
+ uniperiph-id = <2>;
+ version = <5>;
+ mode = "PCM";
+ };
+
+ sti_uni_player3: sti-uni-player@3 {
+ compatible = "st,sti-uni-player";
+ status = "okay";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+ reg = <0x8D85000 0x158>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 7 0 1>;
+ dma-names = "tx";
+ dai-name = "Uni Player #1 (PIO)";
+ uniperiph-id = <3>;
+ version = <5>;
+ mode = "SPDIF";
+ };
+
+ sti_uni_reader1: sti-uni-reader@1 {
+ compatible = "st,sti-uni-reader";
+ status = "disabled";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ reg = <0x8D84000 0x158>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 6 0 1>;
+ dma-names = "rx";
+ dai-name = "Uni Reader #1 (HDMI RX)";
+ version = <3>;
+ };
+
+2) sti-sas-codec: internal audio codec IPs driver
+-------------------------------------------------
+
+Required properties:
+ - compatible: "st,sti<chip>-sas-codec" .
+ Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec"
+
+ - st,syscfg: phandle to boot-device system configuration registers.
+
+ - pinctrl-0: SPDIF PIO description.
+
+ - pinctrl-names: should contain only one value - "default".
+
+Example:
+ sti_sas_codec: sti-sas-codec {
+ compatible = "st,stih407-sas-codec";
+ #sound-dai-cells = <1>;
+ st,reg_audio = <&syscfg_core>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif_out >;
+ };
+
+Example of audio card declaration:
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sti audio card";
+ status = "okay";
+
+ simple-audio-card,dai-link@0 {
+ /* DAC */
+ format = "i2s";
+ dai-tdm-slot-width = <32>;
+ cpu {
+ sound-dai = <&sti_uni_player2>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 1>;
+ };
+ };
+ simple-audio-card,dai-link@1 {
+ /* SPDIF */
+ format = "left_j";
+ cpu {
+ sound-dai = <&sti_uni_player3>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index bd99193e87b9..204b311e0400 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -10,6 +10,8 @@ Required properties:
Optional properties:
- cs-gpios : Specifies the gpio pis to be used for chipselects.
- num-cs : The number of chipselects. If omitted, this will default to 4.
+- reg-io-width : The I/O register width (in bytes) implemented by this
+ device. Supported values are 2 or 4 (the default).
Child nodes as per the generic SPI binding.
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 12ecfe9e3599..d1e914adcf6e 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -12,6 +12,8 @@ Required properties:
- compatible:
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+ - "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
+ family
- reg: Offset and length of SPI controller register space
- num-cs: Number of chip selects. This includes internal as well as
GPIO chip selects.
diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
index e02fbf18c82c..494db6012d02 100644
--- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
@@ -21,6 +21,7 @@ Required properties:
Optional properties:
- img,supports-quad-mode: Should be set if the interface supports quad mode
SPI transfers.
+- spfi-max-frequency: Maximum speed supported by the spfi block.
Example:
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
new file mode 100644
index 000000000000..dcefc438272f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -0,0 +1,51 @@
+Binding for MTK SPI controller
+
+Required properties:
+- compatible: should be one of the following.
+ - mediatek,mt8173-spi: for mt8173 platforms
+ - mediatek,mt8135-spi: for mt8135 platforms
+ - mediatek,mt6589-spi: for mt6589 platforms
+
+- #address-cells: should be 1.
+
+- #size-cells: should be 0.
+
+- reg: Address and length of the register set for the device
+
+- interrupts: Should contain spi interrupt
+
+- clocks: phandles to input clocks.
+ The first should be <&topckgen CLK_TOP_SPI_SEL>.
+ The second should be one of the following.
+ - <&clk26m>: specify parent clock 26MHZ.
+ - <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
+ It's the default one.
+ - <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
+
+- clock-names: shall be "spi-clk" for the controller clock, and
+ "parent-clk" for the parent clock.
+
+Optional properties:
+- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
+ controller used, this value should be 0~3, only required for MT8173.
+ 0: specify GPIO69,70,71,72 for spi pins.
+ 1: specify GPIO102,103,104,105 for spi pins.
+ 2: specify GPIO128,129,130,131 for spi pins.
+ 3: specify GPIO5,6,7,8 for spi pins.
+
+Example:
+
+- SoC Specific Portion:
+spi: spi@1100a000 {
+ compatible = "mediatek,mt8173-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SPI_SEL>, <&topckgen CLK_TOP_SYSPLL3_D2>;
+ clock-names = "spi-clk", "parent-clk";
+ mediatek,pad-select = <0>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt
new file mode 100644
index 000000000000..40e82d51efec
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xlp.txt
@@ -0,0 +1,39 @@
+SPI Master controller for Netlogic XLP MIPS64 SOCs
+==================================================
+
+Currently this SPI controller driver is supported for the following
+Netlogic XLP SoCs:
+ XLP832, XLP316, XLP208, XLP980, XLP532
+
+Required properties:
+- compatible : Should be "netlogic,xlp832-spi".
+- #address-cells : Number of cells required to define a chip select address
+ on the SPI bus.
+- #size-cells : Should be zero.
+- reg : Should contain register location and length.
+- clocks : Phandle of the spi clock
+- interrupts : Interrupt number used by this controller.
+- interrupt-parent : Phandle of the parent interrupt controller.
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+
+ spi: xlp_spi@3a100 {
+ compatible = "netlogic,xlp832-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x3a100 0x100>;
+ clocks = <&spi_clk>;
+ interrupts = <34>;
+ interrupt-parent = <&pic>;
+
+ spi_nor@1 {
+ compatible = "spansion,s25sl12801";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>; /* Chip Select */
+ spi-max-frequency = <40000000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
index 307537787574..555fb117d4fa 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
@@ -1,4 +1,4 @@
-* Freescale i.MX28 LRADC device driver
+* Freescale MXS LRADC device driver
Required properties:
- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
diff --git a/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt b/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt
new file mode 100644
index 000000000000..7afce80bf6a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt
@@ -0,0 +1,28 @@
+* Pistachio general-purpose timer based clocksource
+
+Required properties:
+ - compatible: "img,pistachio-gptimer".
+ - reg: Address range of the timer registers.
+ - interrupts: An interrupt for each of the four timers
+ - clocks: Should contain a clock specifier for each entry in clock-names
+ - clock-names: Should contain the following entries:
+ "sys", interface clock
+ "slow", slow counter clock
+ "fast", fast counter clock
+ - img,cr-periph: Must contain a phandle to the peripheral control
+ syscon node.
+
+Example:
+ timer: timer@18102000 {
+ compatible = "img,pistachio-gptimer";
+ reg = <0x18102000 0x100>;
+ interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>,
+ <&clk_periph PERIPH_CLK_COUNTER_SLOW>,
+ <&cr_periph SYS_CLK_TIMER>;
+ clock-names = "fast", "slow", "sys";
+ img,cr-periph = <&cr_periph>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 7c4408ff4b83..53a3029b7589 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers
---------------------------------------
Required properties:
-- compatible: Should be "mediatek,mt6577-timer"
+- compatible should contain:
+ * "mediatek,mt6589-timer" for MT6589 compatible timers
+ * "mediatek,mt6580-timer" for MT6580 compatible timers
+ * "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580,
+ MT6577)
- reg: Should contain location and length for timers register.
- clocks: Clocks driving the timer hardware. This list should include two
clocks. The order is system clock and as second clock the RTC clock.
diff --git a/Documentation/devicetree/bindings/timer/st,stih407-lpc b/Documentation/devicetree/bindings/timer/st,stih407-lpc
new file mode 100644
index 000000000000..72acb487b856
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/st,stih407-lpc
@@ -0,0 +1,28 @@
+STMicroelectronics Low Power Controller (LPC) - Clocksource
+===========================================================
+
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
+
+[See: ../watchdog/st_lpc_wdt.txt for Watchdog options]
+[See: ../rtc/rtc-st-lpc.txt for RTC options]
+
+Required properties
+
+- compatible : Must be: "st,stih407-lpc"
+- reg : LPC registers base address + size
+- interrupts : LPC interrupt line number and associated flags
+- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt)
+- st,lpc-mode : The LPC can run either one of three modes:
+ ST_LPC_MODE_RTC [0]
+ ST_LPC_MODE_WDT [1]
+ ST_LPC_MODE_CLKSRC [2]
+ One (and only one) mode must be selected.
+
+Example:
+ lpc@fde05000 {
+ compatible = "st,stih407-lpc";
+ reg = <0xfde05000 0x1000>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+ st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
new file mode 100644
index 000000000000..862cd7c79805
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
@@ -0,0 +1,29 @@
+Allwinner sun4i A10 musb DRC/OTG controller
+-------------------------------------------
+
+Required properties:
+ - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb"
+ or "allwinner,sun8i-a33-musb"
+ - reg : mmio address range of the musb controller
+ - clocks : clock specifier for the musb controller ahb gate clock
+ - reset : reset specifier for the ahb reset (A31 and newer only)
+ - interrupts : interrupt to which the musb controller is connected
+ - interrupt-names : must be "mc"
+ - phys : phy specifier for the otg phy
+ - phy-names : must be "usb"
+ - dr_mode : Dual-Role mode must be "host" or "otg"
+ - extcon : extcon specifier for the otg phy
+
+Example:
+
+ usb_otg: usb@01c13000 {
+ compatible = "allwinner,sun4i-a10-musb";
+ reg = <0x01c13000 0x0400>;
+ clocks = <&ahb_gates 0>;
+ interrupts = <38>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 553e2fae3a76..d71ef07bca5d 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -30,6 +30,21 @@ Optional properties:
argument that indicate usb controller index
- disable-over-current: (FSL only) disable over current detect
- external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus
+- itc-setting: interrupt threshold control register control, the setting
+ should be aligned with ITC bits at register USBCMD.
+- ahb-burst-config: it is vendor dependent, the required value should be
+ aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This
+ property is used to change AHB burst configuration, check the chipidea
+ spec for meaning of each value. If this property is not existed, it
+ will use the reset value.
+- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword
+ (4 bytes), This register represents the maximum length of a the burst
+ in 32-bit words while moving data from system memory to the USB
+ bus, changing this value takes effect only the SBUSCFG.AHBBRST is 0.
+- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword
+ (4 bytes), This register represents the maximum length of a the burst
+ in 32-bit words while moving data from the USB bus to system memory,
+ changing this value takes effect only the SBUSCFG.AHBBRST is 0.
Example:
@@ -41,4 +56,9 @@ Example:
phys = <&usb_phy0>;
phy-names = "usb-phy";
vbus-supply = <&reg_usb0_vbus>;
+ gadget-itc-setting = <0x4>; /* 4 micro-frames */
+ /* Incremental burst of unspecified length */
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>; /* 64 bytes */
+ rx-burst-size-dword = <0x10>;
};
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index 477d5bb5e51c..bba825711873 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -11,6 +11,19 @@ Optional properties:
"peripheral" and "otg". In case this attribute isn't
passed via DT, USB DRD controllers should default to
OTG.
+ - otg-rev: tells usb driver the release number of the OTG and EH supplement
+ with which the device and its descriptors are compliant,
+ in binary-coded decimal (i.e. 2.0 is 0200H). This
+ property is used if any real OTG features(HNP/SRP/ADP)
+ is enabled, if ADP is required, otg-rev should be
+ 0x0200 or above.
+ - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP
+ is the basic function of real OTG except you want it
+ to be a srp-capable only B device.
+ - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is
+ optional for OTG device.
+ - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is
+ optional for OTG device.
This is an attribute to a USB controller such as:
@@ -21,4 +34,6 @@ dwc3@4a030000 {
usb-phy = <&usb2_phy>, <&usb3,phy>;
maximum-speed = "super-speed";
dr_mode = "otg";
+ otg-rev = <0x0200>;
+ adp-disable;
};
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index bd8d9e753029..8654a3ec23e4 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -52,6 +52,10 @@ Required properties:
Optional properties:
- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+- switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual
+ SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex
+ D+/D- USB lines between connectors.
+
- qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device
Mode Eye Diagram test. Start address at which these values will be
written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as
diff --git a/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt b/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt
new file mode 100644
index 000000000000..2cb2168cef41
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt
@@ -0,0 +1,76 @@
+Qualcomm's APQ8016/MSM8916 USB transceiver controller
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should contain "qcom,usb-8x16-phy".
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: USB PHY base address and length of the register map
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: See clock-bindings.txt section "consumers". List of
+ two clock specifiers for interface and core controller
+ clocks.
+
+- clock-names:
+ Usage: required
+ Value type: <string>
+ Definition: Must contain "iface" and "core" strings.
+
+- vddcx-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: phandle to the regulator VDCCX supply node.
+
+- v1p8-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: phandle to the regulator 1.8V supply node.
+
+- v3p3-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: phandle to the regulator 3.3V supply node.
+
+- resets:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: See reset.txt section "consumers". PHY reset specifier.
+
+- reset-names:
+ Usage: required
+ Value type: <string>
+ Definition: Must contain "phy" string.
+
+- switch-gpio:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: Some boards are using Dual SPDT USB Switch, witch is
+ controlled by GPIO to de/multiplex D+/D- USB lines
+ between connectors.
+
+Example:
+ usb_phy: phy@78d9000 {
+ compatible = "qcom,usb-8x16-phy";
+ reg = <0x78d9000 0x400>;
+
+ vddcx-supply = <&pm8916_s1_corner>;
+ v1p8-supply = <&pm8916_l7>;
+ v3p3-supply = <&pm8916_l13>;
+
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>;
+ reset-names = "phy";
+
+ // D+/D- lines: 1 - Routed to HUB, 0 - Device connector
+ switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+ };
+
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d444757c4d9e..ac5f0c34ae00 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -46,6 +46,7 @@ chipone ChipOne
chipspark ChipSPARK
chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
+ciaa Computadora Industrial Abierta Argentina
cirrus Cirrus Logic, Inc.
cloudengines Cloud Engines, Inc.
cnm Chips&Media, Inc.
@@ -54,6 +55,7 @@ cortina Cortina Systems, Inc.
cosmic Cosmic Circuits
crystalfontz Crystalfontz America, Inc.
cubietech Cubietech, Ltd.
+cypress Cypress Semiconductor Corporation
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
delta Delta Electronics, Inc.
@@ -110,8 +112,10 @@ ingenic Ingenic Semiconductor
innolux Innolux Corporation
intel Intel Corporation
intercontrol Inter Control Group
+invensense InvenSense Inc.
isee ISEE 2007 S.L.
isil Intersil
+jedec JEDEC Solid State Technology Association
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
kinetic Kinetic Technologies
@@ -135,21 +139,27 @@ mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
mpl MPL AG
+msi Micro-Star International Co. Ltd.
mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
mundoreader Mundo Reader S.L.
murata Murata Manufacturing Co., Ltd.
mxicy Macronix International Co., Ltd.
national National Semiconductor
+nec NEC LCD Technologies, Ltd.
neonode Neonode Inc.
netgear NETGEAR
netlogic Broadcom Corporation (formerly NetLogic Microsystems)
+netxeon Shenzhen Netxeon Technology CO., LTD
newhaven Newhaven Display International
nintendo Nintendo
nokia Nokia
+nuvoton Nuvoton Technology Corporation
nvidia NVIDIA
nxp NXP Semiconductors
+okaya Okaya Electric America, Inc.
onnn ON Semiconductor Corp.
opencores OpenCores.org
+option Option NV
ortustech Ortus Technology Co., Ltd.
ovti OmniVision Technologies
panasonic Panasonic Corporation
@@ -181,6 +191,7 @@ sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
semtech Semtech Corporation
+sharp Sharp Corporation
sil Silicon Image
silabs Silicon Laboratories
siliconmitus Silicon Mitus, Inc.
diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
index a85a964d61f5..424f8444a6cd 100644
--- a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
+++ b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
@@ -5,10 +5,7 @@ Required properties:
- reg: slave address
Optional properties:
-- label: The label for this led
- See Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger: Default trigger assigned to the LED
- See Documentation/devicetree/bindings/leds/common.txt
+- label: The name of the backlight device
- qcom,cs-out: bool; enable current sink output
- qcom,cabc: bool; enable content adaptive backlight control
- qcom,ext-gen: bool; use externally generated modulator signal to dim
diff --git a/Documentation/devicetree/bindings/video/fsl,dcu.txt b/Documentation/devicetree/bindings/video/fsl,dcu.txt
new file mode 100644
index 000000000000..ebf1be9ae393
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,dcu.txt
@@ -0,0 +1,22 @@
+Device Tree bindings for Freescale DCU DRM Driver
+
+Required properties:
+- compatible: Should be one of
+ * "fsl,ls1021a-dcu".
+ * "fsl,vf610-dcu".
+
+- reg: Address and length of the register set for dcu.
+- clocks: From common clock binding: handle to dcu clock.
+- clock-names: From common clock binding: Shall be "dcu".
+- big-endian Boolean property, LS1021A DCU registers are big-endian.
+- fsl,panel: The phandle to panel node.
+
+Examples:
+dcu: dcu@2ce0000 {
+ compatible = "fsl,ls1021a-dcu";
+ reg = <0x0 0x2ce0000 0x0 0x10000>;
+ clocks = <&platform_clk 0>;
+ clock-names = "dcu";
+ big-endian;
+ fsl,panel = <&panel>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index a4d869744f59..86fa6de1019b 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible: must be "atmel,at91sam9260-wdt".
- reg: physical base address of the controller and length of memory mapped
region.
+- clocks: phandle to input clock.
Optional properties:
- timeout-sec: contains the watchdog timeout in seconds.
@@ -39,6 +40,7 @@ Example:
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
timeout-sec = <15>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
index 388c88a01222..039c5ca45577 100644
--- a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
@@ -1,9 +1,11 @@
STMicroelectronics Low Power Controller (LPC) - Watchdog
========================================================
-LPC currently supports Watchdog OR Real Time Clock functionality.
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
[See: ../rtc/rtc-st-lpc.txt for RTC options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
Required properties
@@ -12,9 +14,11 @@ Required properties
- reg : LPC registers base address + size
- interrupts : LPC interrupt line number and associated flags
- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt)
-- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
- ST_LPC_MODE_WDT [1]. One (and only one) mode must be
- selected.
+- st,lpc-mode : The LPC can run either one of three modes:
+ ST_LPC_MODE_RTC [0]
+ ST_LPC_MODE_WDT [1]
+ ST_LPC_MODE_CLKSRC [2]
+ One (and only one) mode must be selected.
Required properties [watchdog mode]
diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt
index ca67b0f04c6e..67d4ce4df109 100644
--- a/Documentation/dmaengine/provider.txt
+++ b/Documentation/dmaengine/provider.txt
@@ -345,12 +345,29 @@ where to put them)
that abstracts it away.
* DMA_CTRL_ACK
- - If set, the transfer can be reused after being completed.
- - There is a guarantee the transfer won't be freed until it is acked
- by async_tx_ack().
+ - If clear, the descriptor cannot be reused by provider until the
+ client acknowledges receipt, i.e. has has a chance to establish any
+ dependency chains
+ - This can be acked by invoking async_tx_ack()
+ - If set, does not mean descriptor can be reused
+
+ * DMA_CTRL_REUSE
+ - If set, the descriptor can be reused after being completed. It should
+ not be freed by provider if this flag is set.
+ - The descriptor should be prepared for reuse by invoking
+ dmaengine_desc_set_reuse() which will set DMA_CTRL_REUSE.
+ - dmaengine_desc_set_reuse() will succeed only when channel support
+ reusable descriptor as exhibited by capablities
- As a consequence, if a device driver wants to skip the dma_map_sg() and
dma_unmap_sg() in between 2 transfers, because the DMA'd data wasn't used,
it can resubmit the transfer right after its completion.
+ - Descriptor can be freed in few ways
+ - Clearing DMA_CTRL_REUSE by invoking dmaengine_desc_clear_reuse()
+ and submitting for last txn
+ - Explicitly invoking dmaengine_desc_free(), this can succeed only
+ when DMA_CTRL_REUSE is already set
+ - Terminating the channel
+
General Design Notes
--------------------
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index c7d49b885559..3fa450881ecb 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -93,7 +93,7 @@ Evolution (GUI)
Some people use this successfully for patches.
When composing mail select: Preformat
- from Format->Heading->Preformatted (Ctrl-7)
+ from Format->Paragraph Style->Preformatted (Ctrl-7)
or the toolbar
Then use:
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 4cf1a2a6bd72..415484f3d59a 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -15,6 +15,10 @@ o fail_page_alloc
injects page allocation failures. (alloc_pages(), get_free_pages(), ...)
+o fail_futex
+
+ injects futex deadlock and uaddr fault errors.
+
o fail_make_request
injects disk IO errors on devices permitted by setting
@@ -113,6 +117,12 @@ configuration of fault-injection capabilities.
specifies the minimum page allocation order to be injected
failures.
+- /sys/kernel/debug/fail_futex/ignore-private:
+
+ Format: { 'Y' | 'N' }
+ default is 'N', setting it to 'Y' will disable failure injections
+ when dealing with private (address space) futexes.
+
o Boot option
In order to inject faults while debugfs is not available (early boot time),
@@ -121,6 +131,7 @@ use the boot option:
failslab=
fail_page_alloc=
fail_make_request=
+ fail_futex=
mmc_core.fail_request=<interval>,<probability>,<space>,<times>
How to add new fault injection capability
diff --git a/Documentation/fb/sm712fb.txt b/Documentation/fb/sm712fb.txt
new file mode 100644
index 000000000000..c388442edf51
--- /dev/null
+++ b/Documentation/fb/sm712fb.txt
@@ -0,0 +1,31 @@
+What is sm712fb?
+=================
+
+This is a graphics framebuffer driver for Silicon Motion SM712 based processors.
+
+How to use it?
+==============
+
+Switching modes is done using the video=sm712fb:... boot parameter.
+
+If you want, for example, enable a resolution of 1280x1024x24bpp you should
+pass to the kernel this command line: "video=sm712fb:0x31B".
+
+You should not compile-in vesafb.
+
+Currently supported video modes are:
+
+[Graphic modes]
+
+bpp | 640x480 800x600 1024x768 1280x1024
+----+--------------------------------------------
+ 8 | 0x301 0x303 0x305 0x307
+ 16 | 0x311 0x314 0x317 0x31A
+ 24 | 0x312 0x315 0x318 0x31B
+
+Missing Features
+================
+(alias TODO list)
+
+ * 2D acceleratrion
+ * dual-head support
diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt
index 4efe36c3ace9..d605c3fc38fd 100644
--- a/Documentation/features/debug/uprobes/arch-support.txt
+++ b/Documentation/features/debug/uprobes/arch-support.txt
@@ -22,7 +22,7 @@
| m68k: | TODO |
| metag: | TODO |
| microblaze: | TODO |
- | mips: | TODO |
+ | mips: | ok |
| mn10300: | TODO |
| nios2: | TODO |
| openrisc: | TODO |
diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt
index bea800910342..76d39d66a5d7 100644
--- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt
+++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt
@@ -32,7 +32,7 @@
| score: | TODO |
| sh: | TODO |
| sparc: | TODO |
- | tile: | TODO |
+ | tile: | ok |
| um: | TODO |
| unicore32: | TODO |
| x86: | ok |
diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt
new file mode 100644
index 000000000000..261b92e2fb1a
--- /dev/null
+++ b/Documentation/features/vm/TLB/arch-support.txt
@@ -0,0 +1,40 @@
+#
+# Feature name: batch-unmap-tlb-flush
+# Kconfig: ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
+# description: arch supports deferral of TLB flush until multiple pages are unmapped
+#
+ -----------------------
+ | arch |status|
+ -----------------------
+ | alpha: | TODO |
+ | arc: | TODO |
+ | arm: | TODO |
+ | arm64: | TODO |
+ | avr32: | .. |
+ | blackfin: | TODO |
+ | c6x: | .. |
+ | cris: | .. |
+ | frv: | .. |
+ | h8300: | .. |
+ | hexagon: | TODO |
+ | ia64: | TODO |
+ | m32r: | TODO |
+ | m68k: | .. |
+ | metag: | TODO |
+ | microblaze: | .. |
+ | mips: | TODO |
+ | mn10300: | TODO |
+ | nios2: | .. |
+ | openrisc: | .. |
+ | parisc: | TODO |
+ | powerpc: | TODO |
+ | s390: | TODO |
+ | score: | .. |
+ | sh: | TODO |
+ | sparc: | TODO |
+ | tile: | TODO |
+ | um: | .. |
+ | unicore32: | .. |
+ | x86: | ok |
+ | xtensa: | TODO |
+ -----------------------
diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt
index d11cc2f8077b..c772b47e7ef0 100644
--- a/Documentation/filesystems/btrfs.txt
+++ b/Documentation/filesystems/btrfs.txt
@@ -61,7 +61,7 @@ Options with (*) are default options and will not show in the mount options.
check_int enables the integrity checker module, which examines all
block write requests to ensure on-disk consistency, at a large
- memory and CPU cost.
+ memory and CPU cost.
check_int_data includes extent data in the integrity checks, and
implies the check_int option.
@@ -113,7 +113,7 @@ Options with (*) are default options and will not show in the mount options.
Disable/enable debugging option to be more verbose in some ENOSPC conditions.
fatal_errors=<action>
- Action to take when encountering a fatal error:
+ Action to take when encountering a fatal error:
"bug" - BUG() on a fatal error. This is the default.
"panic" - panic() on a fatal error.
@@ -132,10 +132,10 @@ Options with (*) are default options and will not show in the mount options.
max_inline=<bytes>
Specify the maximum amount of space, in bytes, that can be inlined in
- a metadata B-tree leaf. The value is specified in bytes, optionally
+ a metadata B-tree leaf. The value is specified in bytes, optionally
with a K, M, or G suffix, case insensitive. In practice, this value
is limited by the root sector size, with some space unavailable due
- to leaf headers. For a 4k sectorsize, max inline data is ~3900 bytes.
+ to leaf headers. For a 4k sector size, max inline data is ~3900 bytes.
metadata_ratio=<value>
Specify that 1 metadata chunk should be allocated after every <value>
@@ -170,7 +170,7 @@ Options with (*) are default options and will not show in the mount options.
recovery
Enable autorecovery attempts if a bad tree root is found at mount time.
- Currently this scans a list of several previous tree roots and tries to
+ Currently this scans a list of several previous tree roots and tries to
use the first readable.
rescan_uuid_tree
@@ -194,7 +194,7 @@ Options with (*) are default options and will not show in the mount options.
ssd_spread
Options to control ssd allocation schemes. By default, BTRFS will
enable or disable ssd allocation heuristics depending on whether a
- rotational or nonrotational disk is in use. The ssd and nossd options
+ rotational or non-rotational disk is in use. The ssd and nossd options
can override this autodetection.
The ssd_spread mount option attempts to allocate into big chunks
@@ -216,13 +216,13 @@ Options with (*) are default options and will not show in the mount options.
This allows mounting of subvolumes which are not in the root of the mounted
filesystem.
You can use "btrfs subvolume show " to see the object ID for a subvolume.
-
+
thread_pool=<number>
The number of worker threads to allocate. The default number is equal
to the number of CPUs + 2, or 8, whichever is smaller.
user_subvol_rm_allowed
- Allow subvolumes to be deleted by a non-root user. Use with caution.
+ Allow subvolumes to be deleted by a non-root user. Use with caution.
MAILING LIST
============
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt
index 88ab81c79109..463f595733e8 100644
--- a/Documentation/filesystems/debugfs.txt
+++ b/Documentation/filesystems/debugfs.txt
@@ -51,6 +51,17 @@ operations should be provided; others can be included as needed. Again,
the return value will be a dentry pointer to the created file, NULL for
error, or ERR_PTR(-ENODEV) if debugfs support is missing.
+Create a file with an initial size, the following function can be used
+instead:
+
+ struct dentry *debugfs_create_file_size(const char *name, umode_t mode,
+ struct dentry *parent, void *data,
+ const struct file_operations *fops,
+ loff_t file_size);
+
+file_size is the initial file size. The other parameters are the same
+as the function debugfs_create_file.
+
In a number of cases, the creation of a set of file operations is not
actually necessary; the debugfs code provides a number of helper functions
for simple situations. Files containing a single integer value can be
@@ -100,6 +111,14 @@ A read on the resulting file will yield either Y (for non-zero values) or
N, followed by a newline. If written to, it will accept either upper- or
lower-case values, or 1 or 0. Any other input will be silently ignored.
+Also, atomic_t values can be placed in debugfs with:
+
+ struct dentry *debugfs_create_atomic_t(const char *name, umode_t mode,
+ struct dentry *parent, atomic_t *value)
+
+A read of this file will get atomic_t values, and a write of this file
+will set atomic_t values.
+
Another option is exporting a block of arbitrary binary data, with
this structure and function:
@@ -147,6 +166,27 @@ The "base" argument may be 0, but you may want to build the reg32 array
using __stringify, and a number of register names (macros) are actually
byte offsets over a base for the register block.
+If you want to dump an u32 array in debugfs, you can create file with:
+
+ struct dentry *debugfs_create_u32_array(const char *name, umode_t mode,
+ struct dentry *parent,
+ u32 *array, u32 elements);
+
+The "array" argument provides data, and the "elements" argument is
+the number of elements in the array. Note: Once array is created its
+size can not be changed.
+
+There is a helper function to create device related seq_file:
+
+ struct dentry *debugfs_create_devm_seqfile(struct device *dev,
+ const char *name,
+ struct dentry *parent,
+ int (*read_fn)(struct seq_file *s,
+ void *data));
+
+The "dev" argument is the device related to this debugfs file, and
+the "read_fn" is a function pointer which to be called to print the
+seq_file content.
There are a couple of other directory-oriented helper functions:
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index b9714569e472..55755395d3dc 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -360,8 +360,8 @@ and are copied into the filesystem. If a transaction is incomplete at
the time of the crash, then there is no guarantee of consistency for
the blocks in that transaction so they are discarded (which means any
filesystem changes they represent are also lost).
-Check Documentation/filesystems/ext3.txt if you want to read more about
-ext3 and journaling.
+Check Documentation/filesystems/ext4.txt if you want to read more about
+ext4 and journaling.
References
==========
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 7ed0d17d6721..58758fbef9e0 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -6,210 +6,7 @@ Ext3 was originally released in September 1999. Written by Stephen Tweedie
for the 2.2 branch, and ported to 2.4 kernels by Peter Braam, Andreas Dilger,
Andrew Morton, Alexander Viro, Ted Ts'o and Stephen Tweedie.
-Ext3 is the ext2 filesystem enhanced with journalling capabilities.
+Ext3 is the ext2 filesystem enhanced with journalling capabilities. The
+filesystem is a subset of ext4 filesystem so use ext4 driver for accessing
+ext3 filesystems.
-Options
-=======
-
-When mounting an ext3 filesystem, the following option are accepted:
-(*) == default
-
-ro Mount filesystem read only. Note that ext3 will replay
- the journal (and thus write to the partition) even when
- mounted "read only". Mount options "ro,noload" can be
- used to prevent writes to the filesystem.
-
-journal=update Update the ext3 file system's journal to the current
- format.
-
-journal=inum When a journal already exists, this option is ignored.
- Otherwise, it specifies the number of the inode which
- will represent the ext3 file system's journal file.
-
-journal_path=path
-journal_dev=devnum When the external journal device's major/minor numbers
- have changed, these options allow the user to specify
- the new journal location. The journal device is
- identified through either its new major/minor numbers
- encoded in devnum, or via a path to the device.
-
-norecovery Don't load the journal on mounting. Note that this forces
-noload mount of inconsistent filesystem, which can lead to
- various problems.
-
-data=journal All data are committed into the journal prior to being
- written into the main file system.
-
-data=ordered (*) All data are forced directly out to the main file
- system prior to its metadata being committed to the
- journal.
-
-data=writeback Data ordering is not preserved, data may be written
- into the main file system after its metadata has been
- committed to the journal.
-
-commit=nrsec (*) Ext3 can be told to sync all its data and metadata
- every 'nrsec' seconds. The default value is 5 seconds.
- This means that if you lose your power, you will lose
- as much as the latest 5 seconds of work (your
- filesystem will not be damaged though, thanks to the
- journaling). This default value (or any low value)
- will hurt performance, but it's good for data-safety.
- Setting it to 0 will have the same effect as leaving
- it at the default (5 seconds).
- Setting it to very large values will improve
- performance.
-
-barrier=<0|1(*)> This enables/disables the use of write barriers in
-barrier (*) the jbd code. barrier=0 disables, barrier=1 enables.
-nobarrier This also requires an IO stack which can support
- barriers, and if jbd gets an error on a barrier
- write, it will disable again with a warning.
- Write barriers enforce proper on-disk ordering
- of journal commits, making volatile disk write caches
- safe to use, at some performance penalty. If
- your disks are battery-backed in one way or another,
- disabling barriers may safely improve performance.
- The mount options "barrier" and "nobarrier" can
- also be used to enable or disable barriers, for
- consistency with other ext3 mount options.
-
-user_xattr Enables Extended User Attributes. Additionally, you
- need to have extended attribute support enabled in the
- kernel configuration (CONFIG_EXT3_FS_XATTR). See the
- attr(5) manual page and http://acl.bestbits.at/ to
- learn more about extended attributes.
-
-nouser_xattr Disables Extended User Attributes.
-
-acl Enables POSIX Access Control Lists support.
- Additionally, you need to have ACL support enabled in
- the kernel configuration (CONFIG_EXT3_FS_POSIX_ACL).
- See the acl(5) manual page and http://acl.bestbits.at/
- for more information.
-
-noacl This option disables POSIX Access Control List
- support.
-
-reservation
-
-noreservation
-
-bsddf (*) Make 'df' act like BSD.
-minixdf Make 'df' act like Minix.
-
-check=none Don't do extra checking of bitmaps on mount.
-nocheck
-
-debug Extra debugging information is sent to syslog.
-
-errors=remount-ro Remount the filesystem read-only on an error.
-errors=continue Keep going on a filesystem error.
-errors=panic Panic and halt the machine if an error occurs.
- (These mount options override the errors behavior
- specified in the superblock, which can be
- configured using tune2fs.)
-
-data_err=ignore(*) Just print an error message if an error occurs
- in a file data buffer in ordered mode.
-data_err=abort Abort the journal if an error occurs in a file
- data buffer in ordered mode.
-
-grpid Give objects the same group ID as their creator.
-bsdgroups
-
-nogrpid (*) New objects have the group ID of their creator.
-sysvgroups
-
-resgid=n The group ID which may use the reserved blocks.
-
-resuid=n The user ID which may use the reserved blocks.
-
-sb=n Use alternate superblock at this location.
-
-quota These options are ignored by the filesystem. They
-noquota are used only by quota tools to recognize volumes
-grpquota where quota should be turned on. See documentation
-usrquota in the quota-tools package for more details
- (http://sourceforge.net/projects/linuxquota).
-
-jqfmt=<quota type> These options tell filesystem details about quota
-usrjquota=<file> so that quota information can be properly updated
-grpjquota=<file> during journal replay. They replace the above
- quota options. See documentation in the quota-tools
- package for more details
- (http://sourceforge.net/projects/linuxquota).
-
-Specification
-=============
-Ext3 shares all disk implementation with the ext2 filesystem, and adds
-transactions capabilities to ext2. Journaling is done by the Journaling Block
-Device layer.
-
-Journaling Block Device layer
------------------------------
-The Journaling Block Device layer (JBD) isn't ext3 specific. It was designed
-to add journaling capabilities to a block device. The ext3 filesystem code
-will inform the JBD of modifications it is performing (called a transaction).
-The journal supports the transactions start and stop, and in case of a crash,
-the journal can replay the transactions to quickly put the partition back into
-a consistent state.
-
-Handles represent a single atomic update to a filesystem. JBD can handle an
-external journal on a block device.
-
-Data Mode
----------
-There are 3 different data modes:
-
-* writeback mode
-In data=writeback mode, ext3 does not journal data at all. This mode provides
-a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
-mode - metadata journaling. A crash+recovery can cause incorrect data to
-appear in files which were written shortly before the crash. This mode will
-typically provide the best ext3 performance.
-
-* ordered mode
-In data=ordered mode, ext3 only officially journals metadata, but it logically
-groups metadata and data blocks into a single unit called a transaction. When
-it's time to write the new metadata out to disk, the associated data blocks
-are written first. In general, this mode performs slightly slower than
-writeback but significantly faster than journal mode.
-
-* journal mode
-data=journal mode provides full data and metadata journaling. All new data is
-written to the journal first, and then to its final location.
-In the event of a crash, the journal can be replayed, bringing both data and
-metadata into a consistent state. This mode is the slowest except when data
-needs to be read from and written to disk at the same time where it
-outperforms all other modes.
-
-Compatibility
--------------
-
-Ext2 partitions can be easily convert to ext3, with `tune2fs -j <dev>`.
-Ext3 is fully compatible with Ext2. Ext3 partitions can easily be mounted as
-Ext2.
-
-
-External Tools
-==============
-See manual pages to learn more.
-
-tune2fs: create a ext3 journal on a ext2 partition with the -j flag.
-mke2fs: create a ext3 partition with the -j flag.
-debugfs: ext2 and ext3 file system debugger.
-ext2online: online (mounted) ext2 and ext3 filesystem resizer
-
-
-References
-==========
-
-kernel source: <file:fs/ext3/>
- <file:fs/jbd/>
-
-programs: http://e2fsprogs.sourceforge.net/
- http://ext2resize.sourceforge.net
-
-useful links: http://www.ibm.com/developerworks/library/l-fs7/index.html
- http://www.ibm.com/developerworks/library/l-fs8/index.html
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt
index e9e750e59efc..e2d5105b7214 100644
--- a/Documentation/filesystems/f2fs.txt
+++ b/Documentation/filesystems/f2fs.txt
@@ -143,7 +143,9 @@ fastboot This option is used when a system wants to reduce mount
extent_cache Enable an extent cache based on rb-tree, it can cache
as many as extent which map between contiguous logical
address and physical address per inode, resulting in
- increasing the cache hit ratio.
+ increasing the cache hit ratio. Set by default.
+noextent_cache Diable an extent cache based on rb-tree explicitly, see
+ the above extent_cache mount option.
noinline_data Disable the inline data feature, inline data feature is
enabled by default.
diff --git a/Documentation/filesystems/nfs/nfs-rdma.txt b/Documentation/filesystems/nfs/nfs-rdma.txt
index 95c13aa575ff..906b6c233f62 100644
--- a/Documentation/filesystems/nfs/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs/nfs-rdma.txt
@@ -138,9 +138,9 @@ Installation
- Build, install, reboot
The NFS/RDMA code will be enabled automatically if NFS and RDMA
- are turned on. The NFS/RDMA client and server are configured via the
- SUNRPC_XPRT_RDMA_CLIENT and SUNRPC_XPRT_RDMA_SERVER config options that both
- depend on SUNRPC and INFINIBAND. The default value of both options will be:
+ are turned on. The NFS/RDMA client and server are configured via the hidden
+ SUNRPC_XPRT_RDMA config option that depends on SUNRPC and INFINIBAND. The
+ value of SUNRPC_XPRT_RDMA will be:
- N if either SUNRPC or INFINIBAND are N, in this case the NFS/RDMA client
and server will not be built
@@ -238,9 +238,8 @@ NFS/RDMA Setup
- Start the NFS server
- If the NFS/RDMA server was built as a module
- (CONFIG_SUNRPC_XPRT_RDMA_SERVER=m in kernel config), load the RDMA
- transport module:
+ If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
+ kernel config), load the RDMA transport module:
$ modprobe svcrdma
@@ -259,9 +258,8 @@ NFS/RDMA Setup
- On the client system
- If the NFS/RDMA client was built as a module
- (CONFIG_SUNRPC_XPRT_RDMA_CLIENT=m in kernel config), load the RDMA client
- module:
+ If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
+ kernel config), load the RDMA client module:
$ modprobe xprtrdma.ko
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index b35a64b82f9e..9494afb9476a 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -212,7 +212,10 @@ Other notes:
- show() methods should return the number of bytes printed into the
buffer. This is the return value of scnprintf().
-- show() should always use scnprintf().
+- show() must not use snprintf() when formatting the value to be
+ returned to user space. If you can guarantee that an overflow
+ will never happen you can use sprintf() otherwise you must use
+ scnprintf().
- store() should return the number of bytes used from the buffer. If the
entire buffer has been used, just return the count argument.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 5eb8456fc41e..8c6f07ad373a 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -769,7 +769,7 @@ struct address_space_operations {
to stall to allow flushers a chance to complete some IO. Ordinarily
it can use PageDirty and PageWriteback but some filesystems have
more complex state (unstable pages in NFS prevent reclaim) or
- do not set those flags due to locking problems (jbd). This callback
+ do not set those flags due to locking problems. This callback
allows a filesystem to indicate to the VM if a page should be
treated as dirty or writeback for the purposes of stalling.
diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX
index 1de43ae46ae6..179beb234f98 100644
--- a/Documentation/gpio/00-INDEX
+++ b/Documentation/gpio/00-INDEX
@@ -6,6 +6,9 @@ consumer.txt
- How to obtain and use GPIOs in a driver
driver.txt
- How to write a GPIO driver
+drivers-on-gpio.txt:
+ - Drivers in other subsystems that can use GPIO to provide more
+ complex functionality.
board.txt
- How to assign GPIOs to a consumer device and a function
sysfs.txt
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index 75542b91b766..a206639454ab 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -237,6 +237,39 @@ Note that these functions should only be used with great moderation ; a driver
should not have to care about the physical line level.
+The active-low property
+-----------------------
+
+As a driver should not have to care about the physical line level, all of the
+gpiod_set_value_xxx() or gpiod_set_array_value_xxx() functions operate with
+the *logical* value. With this they take the active-low property into account.
+This means that they check whether the GPIO is configured to be active-low,
+and if so, they manipulate the passed value before the physical line level is
+driven.
+
+With this, all the gpiod_set_(array)_value_xxx() functions interpret the
+parameter "value" as "active" ("1") or "inactive" ("0"). The physical line
+level will be driven accordingly.
+
+As an example, if the active-low property for a dedicated GPIO is set, and the
+gpiod_set_(array)_value_xxx() passes "active" ("1"), the physical line level
+will be driven low.
+
+To summarize:
+
+Function (example) active-low proporty physical line
+gpiod_set_raw_value(desc, 0); don't care low
+gpiod_set_raw_value(desc, 1); don't care high
+gpiod_set_value(desc, 0); default (active-high) low
+gpiod_set_value(desc, 1); default (active-high) high
+gpiod_set_value(desc, 0); active-low high
+gpiod_set_value(desc, 1); active-low low
+
+Please note again that the set_raw/get_raw functions should be avoided as much
+as possible, especially by drivers which should not care about the actual
+physical line level and worry about the logical value instead.
+
+
Set multiple GPIO outputs with a single function call
-----------------------------------------------------
The following functions set the output values of an array of GPIOs:
diff --git a/Documentation/gpio/drivers-on-gpio.txt b/Documentation/gpio/drivers-on-gpio.txt
new file mode 100644
index 000000000000..f6121328630f
--- /dev/null
+++ b/Documentation/gpio/drivers-on-gpio.txt
@@ -0,0 +1,95 @@
+Subsystem drivers using GPIO
+============================
+
+Note that standard kernel drivers exist for common GPIO tasks and will provide
+the right in-kernel and userspace APIs/ABIs for the job, and that these
+drivers can quite easily interconnect with other kernel subsystems using
+hardware descriptions such as device tree or ACPI:
+
+- leds-gpio: drivers/leds/leds-gpio.c will handle LEDs connected to GPIO
+ lines, giving you the LED sysfs interface
+
+- ledtrig-gpio: drivers/leds/trigger/ledtrig-gpio.c will provide a LED trigger,
+ i.e. a LED will turn on/off in response to a GPIO line going high or low
+ (and that LED may in turn use the leds-gpio as per above).
+
+- gpio-keys: drivers/input/keyboard/gpio_keys.c is used when your GPIO line
+ can generate interrupts in response to a key press. Also supports debounce.
+
+- gpio-keys-polled: drivers/input/keyboard/gpio_keys_polled.c is used when your
+ GPIO line cannot generate interrupts, so it needs to be periodically polled
+ by a timer.
+
+- gpio_mouse: drivers/input/mouse/gpio_mouse.c is used to provide a mouse with
+ up to three buttons by simply using GPIOs and no mouse port. You can cut the
+ mouse cable and connect the wires to GPIO lines or solder a mouse connector
+ to the lines for a more permanent solution of this type.
+
+- gpio-beeper: drivers/input/misc/gpio-beeper.c is used to provide a beep from
+ an external speaker connected to a GPIO line.
+
+- gpio-tilt-polled: drivers/input/misc/gpio_tilt_polled.c provides tilt
+ detection switches using GPIO, which is useful for your homebrewn pinball
+ machine if for nothing else. It can detect different tilt angles of the
+ monitored object.
+
+- extcon-gpio: drivers/extcon/extcon-gpio.c is used when you need to read an
+ external connector status, such as a headset line for an audio driver or an
+ HDMI connector. It will provide a better userspace sysfs interface than GPIO.
+
+- restart-gpio: drivers/power/gpio-restart.c is used to restart/reboot the
+ system by pulling a GPIO line and will register a restart handler so
+ userspace can issue the right system call to restart the system.
+
+- poweroff-gpio: drivers/power/gpio-poweroff.c is used to power the system down
+ by pulling a GPIO line and will register a pm_power_off() callback so that
+ userspace can issue the right system call to power down the system.
+
+- gpio-gate-clock: drivers/clk/clk-gpio-gate.c is used to control a gated clock
+ (off/on) that uses a GPIO, and integrated with the clock subsystem.
+
+- i2c-gpio: drivers/i2c/busses/i2c-gpio.c is used to drive an I2C bus
+ (two wires, SDA and SCL lines) by hammering (bitbang) two GPIO lines. It will
+ appear as any other I2C bus to the system and makes it possible to connect
+ drivers for the I2C devices on the bus like any other I2C bus driver.
+
+- spi_gpio: drivers/spi/spi-gpio.c is used to drive an SPI bus (variable number
+ of wires, atleast SCK and optionally MISO, MOSI and chip select lines) using
+ GPIO hammering (bitbang). It will appear as any other SPI bus on the system
+ and makes it possible to connect drivers for SPI devices on the bus like
+ any other SPI bus driver. For example any MMC/SD card can then be connected
+ to this SPI by using the mmc_spi host from the MMC/SD card subsystem.
+
+- w1-gpio: drivers/w1/masters/w1-gpio.c is used to drive a one-wire bus using
+ a GPIO line, integrating with the W1 subsystem and handling devices on
+ the bus like any other W1 device.
+
+- gpio-fan: drivers/hwmon/gpio-fan.c is used to control a fan for cooling the
+ system, connected to a GPIO line (and optionally a GPIO alarm line),
+ presenting all the right in-kernel and sysfs interfaces to make your system
+ not overheat.
+
+- gpio-regulator: drivers/regulator/gpio-regulator.c is used to control a
+ regulator providing a certain voltage by pulling a GPIO line, integrating
+ with the regulator subsystem and giving you all the right interfaces.
+
+- gpio-wdt: drivers/watchdog/gpio_wdt.c is used to provide a watchdog timer
+ that will periodically "ping" a hardware connected to a GPIO line by toggling
+ it from 1-to-0-to-1. If that hardware does not recieve its "ping"
+ periodically, it will reset the system.
+
+- gpio-nand: drivers/mtd/nand/gpio.c is used to connect a NAND flash chip to
+ a set of simple GPIO lines: RDY, NCE, ALE, CLE, NWP. It interacts with the
+ NAND flash MTD subsystem and provides chip access and partition parsing like
+ any other NAND driving hardware.
+
+Apart from this there are special GPIO drivers in subsystems like MMC/SD to
+read card detect and write protect GPIO lines, and in the TTY serial subsystem
+to emulate MCTRL (modem control) signals CTS/RTS by using two GPIO lines. The
+MTD NOR flash has add-ons for extra GPIO lines too, though the address bus is
+usually connected directly to the flash.
+
+Use those instead of talking directly to the GPIOs using sysfs; they integrate
+with kernel frameworks better than your userspace code could. Needless to say,
+just using the apropriate kernel drivers will simplify and speed up your
+embedded hacking in particular by providing ready-made components.
diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt
index 535b6a8a7a7c..0700b55637f5 100644
--- a/Documentation/gpio/sysfs.txt
+++ b/Documentation/gpio/sysfs.txt
@@ -20,11 +20,10 @@ userspace GPIO can be used to determine system configuration data that
standard kernels won't know about. And for some tasks, simple userspace
GPIO drivers could be all that the system really needs.
-Note that standard kernel drivers exist for common "LEDs and Buttons"
-GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
-instead of talking directly to the GPIOs; they integrate with kernel
-frameworks better than your userspace code could.
-
+DO NOT ABUSE SYFS TO CONTROL HARDWARE THAT HAS PROPER KERNEL DRIVERS.
+PLEASE READ THE DOCUMENT NAMED "drivers-on-gpio.txt" IN THIS DOCUMENTATION
+DIRECTORY TO AVOID REINVENTING KERNEL WHEELS IN USERSPACE. I MEAN IT.
+REALLY.
Paths in Sysfs
--------------
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index 15b4a20d5062..d697229e3c18 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -14,6 +14,10 @@ Supported chips:
Prefix: 'adm1276'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
+ * Analog Devices ADM1293/ADM1294
+ Prefix: 'adm1293', 'adm1294'
+ Addresses scanned: -
+ Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@@ -22,12 +26,12 @@ Description
-----------
This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
-and ADM1276 Hot-Swap Controller and Digital Power Monitor.
+ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
-ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
-board to be removed from or inserted into a live backplane. They also feature
-current and voltage readback via an integrated 12-bit analog-to-digital
-converter (ADC), accessed using a PMBus interface.
+ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
+allow a circuit board to be removed from or inserted into a live backplane.
+They also feature current and voltage readback via an integrated 12
+bit analog-to-digital converter (ADC), accessed using a PMBus interface.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -58,16 +62,16 @@ Sysfs entries
The following attributes are supported. Limits are read-write, history reset
attributes are write-only, all other attributes are read-only.
-in1_label "vin1" or "vout1" depending on chip variant and
- configuration. On ADM1075, vout1 reports the voltage on
- the VAUX pin.
-in1_input Measured voltage.
-in1_min Minimum Voltage.
-in1_max Maximum voltage.
-in1_min_alarm Voltage low alarm.
-in1_max_alarm Voltage high alarm.
-in1_highest Historical maximum voltage.
-in1_reset_history Write any value to reset history.
+inX_label "vin1" or "vout1" depending on chip variant and
+ configuration. On ADM1075, ADM1293, and ADM1294,
+ vout1 reports the voltage on the VAUX pin.
+inX_input Measured voltage.
+inX_min Minimum Voltage.
+inX_max Maximum voltage.
+inX_min_alarm Voltage low alarm.
+inX_max_alarm Voltage high alarm.
+inX_highest Historical maximum voltage.
+inX_reset_history Write any value to reset history.
curr1_label "iout1"
curr1_input Measured current.
@@ -86,7 +90,9 @@ curr1_reset_history Write any value to reset history.
power1_label "pin1"
power1_input Input power.
+power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only.
+power1_input_highest Highest observed input power.
power1_reset_history Write any value to reset history.
- Power attributes are supported on ADM1075 and ADM1276
- only.
+ Power attributes are supported on ADM1075, ADM1276,
+ ADM1293, and ADM1294.
diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power
index 80654813d04a..e2b1b69eebea 100644
--- a/Documentation/hwmon/fam15h_power
+++ b/Documentation/hwmon/fam15h_power
@@ -3,12 +3,13 @@ Kernel driver fam15h_power
Supported chips:
* AMD Family 15h Processors
+* AMD Family 16h Processors
Prefix: 'fam15h_power'
Addresses scanned: PCI space
Datasheets:
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
- (not yet published)
+ BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors
Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
@@ -16,10 +17,11 @@ Description
-----------
This driver permits reading of registers providing power information
-of AMD Family 15h processors.
+of AMD Family 15h and 16h processors.
-For AMD Family 15h processors the following power values can be
-calculated using different processor northbridge function registers:
+For AMD Family 15h and 16h processors the following power values can
+be calculated using different processor northbridge function
+registers:
* BasePwrWatts: Specifies in watts the maximum amount of power
consumed by the processor for NB and logic external to the core.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index e87294878334..733296d65449 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -38,6 +38,10 @@ Supported chips:
Prefix: 'it8728'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
+ * IT8732F
+ Prefix: 'it8732'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not publicly available
* IT8771E
Prefix: 'it8771'
Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -111,9 +115,9 @@ Description
-----------
This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F,
-IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
-IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950
-chips.
+IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F,
+IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and
+SiS950 chips.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -137,10 +141,10 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
have support for 2 additional fans. The additional fans are supported by the
driver.
-The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8781F, IT8782F, IT8783E/F,
-and late IT8712F and IT8705F also have optional 16-bit tachometer counters
-for fans 1 to 3. This is better (no more fan clock divider mess) but not
-compatible with the older chips and revisions. The 16-bit tachometer mode
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F,
+IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
+counters for fans 1 to 3. This is better (no more fan clock divider mess) but
+not compatible with the older chips and revisions. The 16-bit tachometer mode
is enabled by the driver when one of the above chips is detected.
The IT8726F is just bit enhanced IT8716F with additional hardware
@@ -159,6 +163,9 @@ IT8728F. It only supports 16-bit fan mode.
The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
+The IT8732F supports a closed-loop mode for fan control, but this is not
+currently implemented by the driver.
+
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed.
@@ -173,12 +180,14 @@ is done.
Voltage sensors (also known as IN sensors) report their values in volts. An
alarm is triggered if the voltage has crossed a programmable minimum or
maximum limit. Note that minimum in this case always means 'closest to
-zero'; this is important for negative voltage measurements. All voltage
-inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The
-battery voltage in8 does not have limit registers.
-
-On the IT8603E, IT8721F/IT8758E, IT8781F, IT8782F, and IT8783E/F, some
+zero'; this is important for negative voltage measurements. On most chips, all
+voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt. IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and
+3.06 volts, with a resolution of 0.012 volt. IT8732F can measure between 0 and
+2.8 volts with a resolution of 0.0109 volt. The battery voltage in8 does not
+have limit registers.
+
+On the IT8603E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, and IT8783E/F, some
voltage inputs are internal and scaled inside the chip:
* in3 (optional)
* in7 (optional for IT8781F, IT8782F, and IT8783E/F)
diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
index 686c078bb0e0..9a49d3c90cd1 100644
--- a/Documentation/hwmon/ltc2978
+++ b/Documentation/hwmon/ltc2978
@@ -6,6 +6,10 @@ Supported chips:
Prefix: 'ltc2974'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2974
+ * Linear Technology LTC2975
+ Prefix: 'ltc2975'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc2975
* Linear Technology LTC2977
Prefix: 'ltc2977'
Addresses scanned: -
@@ -15,14 +19,38 @@ Supported chips:
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2978
http://www.linear.com/product/ltc2978a
+ * Linear Technology LTC2980
+ Prefix: 'ltc2980'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc2980
* Linear Technology LTC3880
Prefix: 'ltc3880'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3880
+ * Linear Technology LTC3882
+ Prefix: 'ltc3882'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc3882
* Linear Technology LTC3883
Prefix: 'ltc3883'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3883
+ * Linear Technology LTC3886
+ Prefix: 'ltc3886'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc3886
+ * Linear Technology LTC3887
+ Prefix: 'ltc3887'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc3887
+ * Linear Technology LTM2987
+ Prefix: 'ltm2987'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltm2987
+ * Linear Technology LTM4675
+ Prefix: 'ltm4675'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltm4675
* Linear Technology LTM4676
Prefix: 'ltm4676'
Addresses scanned: -
@@ -34,11 +62,20 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-LTC2974 is a quad digital power supply manager. LTC2978 is an octal power supply
-monitor. LTC2977 is a pin compatible replacement for LTC2978. LTC3880 is a dual
-output poly-phase step-down DC/DC controller. LTC3883 is a single phase
-step-down DC/DC controller. LTM4676 is a dual 13A or single 26A uModule
-regulator.
+LTC2974 and LTC2975 are quad digital power supply managers.
+LTC2978 is an octal power supply monitor.
+LTC2977 is a pin compatible replacement for LTC2978.
+LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977
+in a single die. The chip is instantiated and reported as two separate chips
+on two different I2C bus addresses.
+LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down
+DC/DC controllers.
+LTC3883 is a single phase step-down DC/DC controller.
+LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
+additional components on a single die. The chip is instantiated and reported
+as two separate chips on two different I2C bus addresses.
+LTM4675 is a dual 9A or single 18A μModule regulator
+LTM4676 is a dual 13A or single 26A uModule regulator.
Usage Notes
@@ -61,26 +98,32 @@ in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_lcrit Critical minimum input voltage.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_lcrit_alarm Input voltage critical low alarm.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_crit_alarm Input voltage critical high alarm.
in1_lowest Lowest input voltage.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_highest Highest input voltage.
in1_reset_history Reset input voltage history.
in[N]_label "vout[1-8]".
- LTC2974: N=2-5
- LTC2977: N=2-9
+ LTC2974, LTC2975: N=2-5
+ LTC2977, LTC2980, LTM2987: N=2-9
LTC2978: N=2-9
- LTC3880, LTM4676: N=2-3
+ LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
+ N=2-3
LTC3883: N=2
in[N]_input Measured output voltage.
in[N]_min Minimum output voltage.
@@ -91,67 +134,78 @@ in[N]_min_alarm Output voltage low alarm.
in[N]_max_alarm Output voltage high alarm.
in[N]_lcrit_alarm Output voltage critical low alarm.
in[N]_crit_alarm Output voltage critical high alarm.
-in[N]_lowest Lowest output voltage. LTC2974 and LTC2978 only.
+in[N]_lowest Lowest output voltage. LTC2974, LTC2975,
+ and LTC2978 only.
in[N]_highest Highest output voltage.
in[N]_reset_history Reset output voltage history.
temp[N]_input Measured temperature.
- On LTC2974, temp[1-4] report external temperatures,
- and temp5 reports the chip temperature.
- On LTC2977 and LTC2978, only one temperature measurement
- is supported and reports the chip temperature.
- On LTC3880 and LTM4676, temp1 and temp2 report external
- temperatures, and temp3 reports the chip temperature.
+ On LTC2974 and LTC2975, temp[1-4] report external
+ temperatures, and temp5 reports the chip temperature.
+ On LTC2977, LTC2980, LTC2978, and LTM2987, only one
+ temperature measurement is supported and reports
+ the chip temperature.
+ On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
+ temp1 and temp2 report external temperatures, and temp3
+ reports the chip temperature.
On LTC3883, temp1 reports an external temperature,
and temp2 reports the chip temperature.
-temp[N]_min Mimimum temperature. LTC2974, LCT2977, and LTC2978 only.
+temp[N]_min Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978,
+ and LTM2987 only.
temp[N]_max Maximum temperature.
temp[N]_lcrit Critical low temperature.
temp[N]_crit Critical high temperature.
temp[N]_min_alarm Temperature low alarm.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
+ LTM2987 only.
temp[N]_max_alarm Temperature high alarm.
temp[N]_lcrit_alarm Temperature critical low alarm.
temp[N]_crit_alarm Temperature critical high alarm.
temp[N]_lowest Lowest measured temperature.
- LTC2974, LTC2977, and LTC2978 only.
- Not supported for chip temperature sensor on LTC2974.
+ LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
+ LTM2987 only.
+ Not supported for chip temperature sensor on LTC2974 and
+ LTC2975.
temp[N]_highest Highest measured temperature. Not supported for chip
- temperature sensor on LTC2974.
+ temperature sensor on LTC2974 and LTC2975.
temp[N]_reset_history Reset temperature history. Not supported for chip
- temperature sensor on LTC2974.
+ temperature sensor on LTC2974 and LTC2975.
-power1_label "pin". LTC3883 only.
+power1_label "pin". LTC3883 and LTC3886 only.
power1_input Measured input power.
power[N]_label "pout[1-4]".
- LTC2974: N=1-4
- LTC2977: Not supported
+ LTC2974, LTC2975: N=1-4
+ LTC2977, LTC2980, LTM2987: Not supported
LTC2978: Not supported
- LTC3880, LTM4676: N=1-2
+ LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
+ N=1-2
LTC3883: N=2
power[N]_input Measured output power.
-curr1_label "iin". LTC3880, LTC3883, and LTM4676 only.
+curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
+ and LTM4676 only.
curr1_input Measured input current.
curr1_max Maximum input current.
curr1_max_alarm Input current high alarm.
-curr1_highest Highest input current. LTC3883 only.
-curr1_reset_history Reset input current history. LTC3883 only.
+curr1_highest Highest input current. LTC3883 and LTC3886 only.
+curr1_reset_history Reset input current history. LTC3883 and LTC3886 only.
curr[N]_label "iout[1-4]".
- LTC2974: N=1-4
- LTC2977: not supported
+ LTC2974, LTC2975: N=1-4
+ LTC2977, LTC2980, LTM2987: not supported
LTC2978: not supported
- LTC3880, LTM4676: N=2-3
+ LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
+ N=2-3
LTC3883: N=2
curr[N]_input Measured output current.
curr[N]_max Maximum output current.
curr[N]_crit Critical high output current.
-curr[N]_lcrit Critical low output current. LTC2974 only.
+curr[N]_lcrit Critical low output current. LTC2974 and LTC2975 only.
curr[N]_max_alarm Output current high alarm.
curr[N]_crit_alarm Output current critical high alarm.
-curr[N]_lcrit_alarm Output current critical low alarm. LTC2974 only.
-curr[N]_lowest Lowest output current. LTC2974 only.
+curr[N]_lcrit_alarm Output current critical low alarm.
+ LTC2974 and LTC2975 only.
+curr[N]_lowest Lowest output current. LTC2974 and LTC2975 only.
curr[N]_highest Highest output current.
curr[N]_reset_history Reset output current history.
diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751
new file mode 100644
index 000000000000..f9fa25ebb521
--- /dev/null
+++ b/Documentation/hwmon/max20751
@@ -0,0 +1,77 @@
+Kernel driver max20751
+======================
+
+Supported chips:
+ * maxim MAX20751
+ Prefix: 'max20751'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf
+ Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports MAX20751 Multiphase Master with PMBus Interface
+and Internal Buck Converter.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+in1_label "vin1"
+in1_input Measured voltage.
+in1_min Minimum input voltage.
+in1_max Maximum input voltage.
+in1_lcrit Critical minimum input voltage.
+in1_crit Critical maximum input voltage.
+in1_min_alarm Input voltage low alarm.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_min_alarm Input voltage low alarm.
+in1_max_alarm Input voltage high alarm.
+
+in2_label "vout1"
+in2_input Measured voltage.
+in2_min Minimum output voltage.
+in2_max Maximum output voltage.
+in2_lcrit Critical minimum output voltage.
+in2_crit Critical maximum output voltage.
+in2_min_alarm Output voltage low alarm.
+in2_lcrit_alarm Output voltage critical low alarm.
+in2_min_alarm Output voltage low alarm.
+in2_max_alarm Output voltage high alarm.
+
+curr1_input Measured output current.
+curr1_label "iout1"
+curr1_max Maximum output current.
+curr1_alarm Current high alarm.
+
+temp1_input Measured temperature.
+temp1_max Maximum temperature.
+temp1_crit Critical high temperature.
+temp1_max_alarm Chip temperature high alarm.
+temp1_crit_alarm Chip temperature critical high alarm.
+
+power1_input Output power.
+power1_label "pout1"
diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802
index 2e00f5e344bc..5438deb6be02 100644
--- a/Documentation/hwmon/nct7802
+++ b/Documentation/hwmon/nct7802
@@ -17,8 +17,7 @@ This driver implements support for the Nuvoton NCT7802Y hardware monitoring
chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
speed sensors.
-The chip also supports intelligent fan speed control. This functionality is
-not currently supported by the driver.
+Smart Fanâ„¢ speed control is available via pwmX_auto_point attributes.
Tested Boards and BIOS Versions
-------------------------------
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index a3557da8f5b4..b397675e876d 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -23,11 +23,15 @@ Supported chips:
http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
- * Texas Instruments TPS40400
- Prefixes: 'tps40400'
+ * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25
+ Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25'
Addresses scanned: -
Datasheets:
http://www.ti.com/lit/gpn/tps40400
+ http://www.ti.com/lit/gpn/tps544b20
+ http://www.ti.com/lit/gpn/tps544b25
+ http://www.ti.com/lit/gpn/tps544c20
+ http://www.ti.com/lit/gpn/tps544c25
* Generic PMBus devices
Prefix: 'pmbus'
Addresses scanned: -
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index c86f2f1ae4f6..1fec1135791d 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
-the DualPoint Stick. For non interleaved dualpoint devices the pointingstick
-buttons get reported separately in the PSM, PSR and PSL bits.
+the DualPoint Stick. The M, R and L bits signal the combined status of both
+the pointingstick and touchpad buttons, except for Dell dualpoint devices
+where the pointingstick buttons get reported separately in the PSM, PSR
+and PSL bits.
Dualpoint device -- interleaved packet format
---------------------------------------------
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 611c52267d24..39ac6546d4a4 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -124,6 +124,8 @@ Code Seq#(hex) Include File Comments
'H' 00-7F linux/hiddev.h conflict!
'H' 00-0F linux/hidraw.h conflict!
'H' 01 linux/mei.h conflict!
+'H' 02 linux/mei.h conflict!
+'H' 03 linux/mei.h conflict!
'H' 00-0F sound/asound.h conflict!
'H' 20-40 sound/asound_fm.h conflict!
'H' 80-8F sound/sfnt_info.h conflict!
@@ -301,6 +303,7 @@ Code Seq#(hex) Include File Comments
0xA3 80-8F Port ACL in development:
<mailto:tlewis@mindspring.com>
0xA3 90-9F linux/dtlk.h
+0xAA 00-3F linux/uapi/linux/userfaultfd.h
0xAB 00-1F linux/nbd.h
0xAC 00-1F linux/raw.h
0xAD 00 Netfilter device in development:
@@ -314,6 +317,7 @@ Code Seq#(hex) Include File Comments
0xB3 00 linux/mmc/ioctl.h
0xC0 00-0F linux/usb/iowarrior.h
0xCA 00-0F uapi/misc/cxl.h
+0xCA 80-8F uapi/scsi/cxlflash_ioctl.h
0xCB 00-1F CBM serial IEC bus in development:
<mailto:michael.klein@puffin.lb.shuttle.de>
0xCD 01 linux/reiserfs_fs.h
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index acbc1a3d0d91..78f69cdc9b3f 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -128,7 +128,7 @@ are:
special place-holders for where the extracted documentation should
go.
-- scripts/basic/docproc.c
+- scripts/docproc.c
This is a program for converting SGML template files into SGML
files. When a file is referenced it is searched for symbols
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 1d6f0459cd7b..f2529286cd66 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -910,6 +910,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Disable PIN 1 of APIC timer
Can be useful to work around chipset bugs.
+ dis_ucode_ldr [X86] Disable the microcode loader.
+
dma_debug=off If the kernel is compiled with DMA_API_DEBUG support,
this option disables the debugging code at boot.
@@ -1315,6 +1317,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
<bus_id>,<clkrate>
i8042.debug [HW] Toggle i8042 debug mode
+ i8042.unmask_kbd_data
+ [HW] Enable printing of interrupt data from the KBD port
+ (disabled by default, and as a pre-condition
+ requires that i8042.debug=1 be enabled)
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
keyboard and cannot control its state
@@ -3135,22 +3141,35 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
in a given burst of a callback-flood test.
rcutorture.fqs_duration= [KNL]
- Set duration of force_quiescent_state bursts.
+ Set duration of force_quiescent_state bursts
+ in microseconds.
rcutorture.fqs_holdoff= [KNL]
- Set holdoff time within force_quiescent_state bursts.
+ Set holdoff time within force_quiescent_state bursts
+ in microseconds.
rcutorture.fqs_stutter= [KNL]
- Set wait time between force_quiescent_state bursts.
+ Set wait time between force_quiescent_state bursts
+ in seconds.
+
+ rcutorture.gp_cond= [KNL]
+ Use conditional/asynchronous update-side
+ primitives, if available.
rcutorture.gp_exp= [KNL]
- Use expedited update-side primitives.
+ Use expedited update-side primitives, if available.
rcutorture.gp_normal= [KNL]
- Use normal (non-expedited) update-side primitives.
- If both gp_exp and gp_normal are set, do both.
- If neither gp_exp nor gp_normal are set, still
- do both.
+ Use normal (non-expedited) asynchronous
+ update-side primitives, if available.
+
+ rcutorture.gp_sync= [KNL]
+ Use normal (non-expedited) synchronous
+ update-side primitives, if available. If all
+ of rcutorture.gp_cond=, rcutorture.gp_exp=,
+ rcutorture.gp_normal=, and rcutorture.gp_sync=
+ are zero, rcutorture acts as if is interpreted
+ they are all non-zero.
rcutorture.n_barrier_cbs= [KNL]
Set callbacks/threads for rcu_barrier() testing.
@@ -3177,9 +3196,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Set time (s) between CPU-hotplug operations, or
zero to disable CPU-hotplug testing.
- rcutorture.torture_runnable= [BOOT]
- Start rcutorture running at boot time.
-
rcutorture.shuffle_interval= [KNL]
Set task-shuffle interval (s). Shuffling tasks
allows some CPUs to go into dyntick-idle mode
@@ -3220,6 +3236,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Test RCU's dyntick-idle handling. See also the
rcutorture.shuffle_interval parameter.
+ rcutorture.torture_runnable= [BOOT]
+ Start rcutorture running at boot time.
+
rcutorture.torture_type= [KNL]
Specify the RCU implementation to test.
diff --git a/Documentation/mailbox.txt b/Documentation/mailbox.txt
index 1092ad9578da..7ed371c85204 100644
--- a/Documentation/mailbox.txt
+++ b/Documentation/mailbox.txt
@@ -51,8 +51,7 @@ struct demo_client {
*/
static void message_from_remote(struct mbox_client *cl, void *mssg)
{
- struct demo_client *dc = container_of(mbox_client,
- struct demo_client, cl);
+ struct demo_client *dc = container_of(cl, struct demo_client, cl);
if (dc->async) {
if (is_an_ack(mssg)) {
/* An ACK to our last sample sent */
@@ -68,8 +67,7 @@ static void message_from_remote(struct mbox_client *cl, void *mssg)
static void sample_sent(struct mbox_client *cl, void *mssg, int r)
{
- struct demo_client *dc = container_of(mbox_client,
- struct demo_client, cl);
+ struct demo_client *dc = container_of(cl, struct demo_client, cl);
complete(&dc->c);
}
diff --git a/Documentation/md-cluster.txt b/Documentation/md-cluster.txt
index de1af7db3355..1b794369e03a 100644
--- a/Documentation/md-cluster.txt
+++ b/Documentation/md-cluster.txt
@@ -91,7 +91,7 @@ The algorithm is:
this message inappropriate or redundant.
3. sender write LVB.
- sender down-convert MESSAGE from EX to CR
+ sender down-convert MESSAGE from EX to CW
sender try to get EX of ACK
[ wait until all receiver has *processed* the MESSAGE ]
@@ -112,7 +112,7 @@ The algorithm is:
sender down-convert ACK from EX to CR
sender release MESSAGE
sender release TOKEN
- receiver upconvert to EX of MESSAGE
+ receiver upconvert to PR of MESSAGE
receiver get CR of ACK
receiver release MESSAGE
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 13feb697271f..2ba8461b0631 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -194,22 +194,22 @@ There are some minimal guarantees that may be expected of a CPU:
(*) On any given CPU, dependent memory accesses will be issued in order, with
respect to itself. This means that for:
- ACCESS_ONCE(Q) = P; smp_read_barrier_depends(); D = ACCESS_ONCE(*Q);
+ WRITE_ONCE(Q, P); smp_read_barrier_depends(); D = READ_ONCE(*Q);
the CPU will issue the following memory operations:
Q = LOAD P, D = LOAD *Q
and always in that order. On most systems, smp_read_barrier_depends()
- does nothing, but it is required for DEC Alpha. The ACCESS_ONCE()
- is required to prevent compiler mischief. Please note that you
- should normally use something like rcu_dereference() instead of
- open-coding smp_read_barrier_depends().
+ does nothing, but it is required for DEC Alpha. The READ_ONCE()
+ and WRITE_ONCE() are required to prevent compiler mischief. Please
+ note that you should normally use something like rcu_dereference()
+ instead of open-coding smp_read_barrier_depends().
(*) Overlapping loads and stores within a particular CPU will appear to be
ordered within that CPU. This means that for:
- a = ACCESS_ONCE(*X); ACCESS_ONCE(*X) = b;
+ a = READ_ONCE(*X); WRITE_ONCE(*X, b);
the CPU will only issue the following sequence of memory operations:
@@ -217,7 +217,7 @@ There are some minimal guarantees that may be expected of a CPU:
And for:
- ACCESS_ONCE(*X) = c; d = ACCESS_ONCE(*X);
+ WRITE_ONCE(*X, c); d = READ_ONCE(*X);
the CPU will only issue:
@@ -228,11 +228,11 @@ There are some minimal guarantees that may be expected of a CPU:
And there are a number of things that _must_ or _must_not_ be assumed:
- (*) It _must_not_ be assumed that the compiler will do what you want with
- memory references that are not protected by ACCESS_ONCE(). Without
- ACCESS_ONCE(), the compiler is within its rights to do all sorts
- of "creative" transformations, which are covered in the Compiler
- Barrier section.
+ (*) It _must_not_ be assumed that the compiler will do what you want
+ with memory references that are not protected by READ_ONCE() and
+ WRITE_ONCE(). Without them, the compiler is within its rights to
+ do all sorts of "creative" transformations, which are covered in
+ the Compiler Barrier section.
(*) It _must_not_ be assumed that independent loads and stores will be issued
in the order given. This means that for:
@@ -520,8 +520,8 @@ following sequence of events:
{ A == 1, B == 2, C = 3, P == &A, Q == &C }
B = 4;
<write barrier>
- ACCESS_ONCE(P) = &B
- Q = ACCESS_ONCE(P);
+ WRITE_ONCE(P, &B)
+ Q = READ_ONCE(P);
D = *Q;
There's a clear data dependency here, and it would seem that by the end of the
@@ -547,8 +547,8 @@ between the address load and the data load:
{ A == 1, B == 2, C = 3, P == &A, Q == &C }
B = 4;
<write barrier>
- ACCESS_ONCE(P) = &B
- Q = ACCESS_ONCE(P);
+ WRITE_ONCE(P, &B);
+ Q = READ_ONCE(P);
<data dependency barrier>
D = *Q;
@@ -574,8 +574,8 @@ access:
{ M[0] == 1, M[1] == 2, M[3] = 3, P == 0, Q == 3 }
M[1] = 4;
<write barrier>
- ACCESS_ONCE(P) = 1
- Q = ACCESS_ONCE(P);
+ WRITE_ONCE(P, 1);
+ Q = READ_ONCE(P);
<data dependency barrier>
D = M[Q];
@@ -596,10 +596,10 @@ A load-load control dependency requires a full read memory barrier, not
simply a data dependency barrier to make it work correctly. Consider the
following bit of code:
- q = ACCESS_ONCE(a);
+ q = READ_ONCE(a);
if (q) {
<data dependency barrier> /* BUG: No data dependency!!! */
- p = ACCESS_ONCE(b);
+ p = READ_ONCE(b);
}
This will not have the desired effect because there is no actual data
@@ -608,10 +608,10 @@ by attempting to predict the outcome in advance, so that other CPUs see
the load from b as having happened before the load from a. In such a
case what's actually required is:
- q = ACCESS_ONCE(a);
+ q = READ_ONCE(a);
if (q) {
<read barrier>
- p = ACCESS_ONCE(b);
+ p = READ_ONCE(b);
}
However, stores are not speculated. This means that ordering -is- provided
@@ -619,7 +619,7 @@ for load-store control dependencies, as in the following example:
q = READ_ONCE_CTRL(a);
if (q) {
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
}
Control dependencies pair normally with other types of barriers. That
@@ -647,11 +647,11 @@ branches of the "if" statement as follows:
q = READ_ONCE_CTRL(a);
if (q) {
barrier();
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something();
} else {
barrier();
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something_else();
}
@@ -660,12 +660,12 @@ optimization levels:
q = READ_ONCE_CTRL(a);
barrier();
- ACCESS_ONCE(b) = p; /* BUG: No ordering vs. load from a!!! */
+ WRITE_ONCE(b, p); /* BUG: No ordering vs. load from a!!! */
if (q) {
- /* ACCESS_ONCE(b) = p; -- moved up, BUG!!! */
+ /* WRITE_ONCE(b, p); -- moved up, BUG!!! */
do_something();
} else {
- /* ACCESS_ONCE(b) = p; -- moved up, BUG!!! */
+ /* WRITE_ONCE(b, p); -- moved up, BUG!!! */
do_something_else();
}
@@ -676,7 +676,7 @@ assembly code even after all compiler optimizations have been applied.
Therefore, if you need ordering in this example, you need explicit
memory barriers, for example, smp_store_release():
- q = ACCESS_ONCE(a);
+ q = READ_ONCE(a);
if (q) {
smp_store_release(&b, p);
do_something();
@@ -690,10 +690,10 @@ ordering is guaranteed only when the stores differ, for example:
q = READ_ONCE_CTRL(a);
if (q) {
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something();
} else {
- ACCESS_ONCE(b) = r;
+ WRITE_ONCE(b, r);
do_something_else();
}
@@ -706,10 +706,10 @@ the needed conditional. For example:
q = READ_ONCE_CTRL(a);
if (q % MAX) {
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something();
} else {
- ACCESS_ONCE(b) = r;
+ WRITE_ONCE(b, r);
do_something_else();
}
@@ -718,7 +718,7 @@ equal to zero, in which case the compiler is within its rights to
transform the above code into the following:
q = READ_ONCE_CTRL(a);
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something_else();
Given this transformation, the CPU is not required to respect the ordering
@@ -731,10 +731,10 @@ one, perhaps as follows:
q = READ_ONCE_CTRL(a);
BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */
if (q % MAX) {
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something();
} else {
- ACCESS_ONCE(b) = r;
+ WRITE_ONCE(b, r);
do_something_else();
}
@@ -746,18 +746,18 @@ You must also be careful not to rely too much on boolean short-circuit
evaluation. Consider this example:
q = READ_ONCE_CTRL(a);
- if (a || 1 > 0)
- ACCESS_ONCE(b) = 1;
+ if (q || 1 > 0)
+ WRITE_ONCE(b, 1);
Because the first condition cannot fault and the second condition is
always true, the compiler can transform this example as following,
defeating control dependency:
q = READ_ONCE_CTRL(a);
- ACCESS_ONCE(b) = 1;
+ WRITE_ONCE(b, 1);
This example underscores the need to ensure that the compiler cannot
-out-guess your code. More generally, although ACCESS_ONCE() does force
+out-guess your code. More generally, although READ_ONCE() does force
the compiler to actually emit code for a given load, it does not force
the compiler to use the results.
@@ -769,7 +769,7 @@ x and y both being zero:
======================= =======================
r1 = READ_ONCE_CTRL(x); r2 = READ_ONCE_CTRL(y);
if (r1 > 0) if (r2 > 0)
- ACCESS_ONCE(y) = 1; ACCESS_ONCE(x) = 1;
+ WRITE_ONCE(y, 1); WRITE_ONCE(x, 1);
assert(!(r1 == 1 && r2 == 1));
@@ -779,7 +779,7 @@ then adding the following CPU would guarantee a related assertion:
CPU 2
=====================
- ACCESS_ONCE(x) = 2;
+ WRITE_ONCE(x, 2);
assert(!(r1 == 2 && r2 == 1 && x == 2)); /* FAILS!!! */
@@ -798,8 +798,7 @@ In summary:
(*) Control dependencies must be headed by READ_ONCE_CTRL().
Or, as a much less preferable alternative, interpose
- be headed by READ_ONCE() or an ACCESS_ONCE() read and must
- have smp_read_barrier_depends() between this read and the
+ smp_read_barrier_depends() between a READ_ONCE() and the
control-dependent write.
(*) Control dependencies can order prior loads against later stores.
@@ -815,15 +814,16 @@ In summary:
(*) Control dependencies require at least one run-time conditional
between the prior load and the subsequent store, and this
- conditional must involve the prior load. If the compiler
- is able to optimize the conditional away, it will have also
- optimized away the ordering. Careful use of ACCESS_ONCE() can
- help to preserve the needed conditional.
+ conditional must involve the prior load. If the compiler is able
+ to optimize the conditional away, it will have also optimized
+ away the ordering. Careful use of READ_ONCE_CTRL() READ_ONCE(),
+ and WRITE_ONCE() can help to preserve the needed conditional.
(*) Control dependencies require that the compiler avoid reordering the
- dependency into nonexistence. Careful use of ACCESS_ONCE() or
- barrier() can help to preserve your control dependency. Please
- see the Compiler Barrier section for more information.
+ dependency into nonexistence. Careful use of READ_ONCE_CTRL()
+ or smp_read_barrier_depends() can help to preserve your control
+ dependency. Please see the Compiler Barrier section for more
+ information.
(*) Control dependencies pair normally with other types of barriers.
@@ -848,11 +848,11 @@ barrier, an acquire barrier, a release barrier, or a general barrier:
CPU 1 CPU 2
=============== ===============
- ACCESS_ONCE(a) = 1;
+ WRITE_ONCE(a, 1);
<write barrier>
- ACCESS_ONCE(b) = 2; x = ACCESS_ONCE(b);
+ WRITE_ONCE(b, 2); x = READ_ONCE(b);
<read barrier>
- y = ACCESS_ONCE(a);
+ y = READ_ONCE(a);
Or:
@@ -860,7 +860,7 @@ Or:
=============== ===============================
a = 1;
<write barrier>
- ACCESS_ONCE(b) = &a; x = ACCESS_ONCE(b);
+ WRITE_ONCE(b, &a); x = READ_ONCE(b);
<data dependency barrier>
y = *x;
@@ -868,11 +868,11 @@ Or even:
CPU 1 CPU 2
=============== ===============================
- r1 = ACCESS_ONCE(y);
+ r1 = READ_ONCE(y);
<general barrier>
- ACCESS_ONCE(y) = 1; if (r2 = ACCESS_ONCE(x)) {
+ WRITE_ONCE(y, 1); if (r2 = READ_ONCE(x)) {
<implicit control dependency>
- ACCESS_ONCE(y) = 1;
+ WRITE_ONCE(y, 1);
}
assert(r1 == 0 || r2 == 0);
@@ -886,11 +886,11 @@ versa:
CPU 1 CPU 2
=================== ===================
- ACCESS_ONCE(a) = 1; }---- --->{ v = ACCESS_ONCE(c);
- ACCESS_ONCE(b) = 2; } \ / { w = ACCESS_ONCE(d);
+ WRITE_ONCE(a, 1); }---- --->{ v = READ_ONCE(c);
+ WRITE_ONCE(b, 2); } \ / { w = READ_ONCE(d);
<write barrier> \ <read barrier>
- ACCESS_ONCE(c) = 3; } / \ { x = ACCESS_ONCE(a);
- ACCESS_ONCE(d) = 4; }---- --->{ y = ACCESS_ONCE(b);
+ WRITE_ONCE(c, 3); } / \ { x = READ_ONCE(a);
+ WRITE_ONCE(d, 4); }---- --->{ y = READ_ONCE(b);
EXAMPLES OF MEMORY BARRIER SEQUENCES
@@ -1340,10 +1340,10 @@ compiler from moving the memory accesses either side of it to the other side:
barrier();
-This is a general barrier -- there are no read-read or write-write variants
-of barrier(). However, ACCESS_ONCE() can be thought of as a weak form
-for barrier() that affects only the specific accesses flagged by the
-ACCESS_ONCE().
+This is a general barrier -- there are no read-read or write-write
+variants of barrier(). However, READ_ONCE() and WRITE_ONCE() can be
+thought of as weak forms of barrier() that affect only the specific
+accesses flagged by the READ_ONCE() or WRITE_ONCE().
The barrier() function has the following effects:
@@ -1355,9 +1355,10 @@ The barrier() function has the following effects:
(*) Within a loop, forces the compiler to load the variables used
in that loop's conditional on each pass through that loop.
-The ACCESS_ONCE() function can prevent any number of optimizations that,
-while perfectly safe in single-threaded code, can be fatal in concurrent
-code. Here are some examples of these sorts of optimizations:
+The READ_ONCE() and WRITE_ONCE() functions can prevent any number of
+optimizations that, while perfectly safe in single-threaded code, can
+be fatal in concurrent code. Here are some examples of these sorts
+of optimizations:
(*) The compiler is within its rights to reorder loads and stores
to the same variable, and in some cases, the CPU is within its
@@ -1370,11 +1371,11 @@ code. Here are some examples of these sorts of optimizations:
Might result in an older value of x stored in a[1] than in a[0].
Prevent both the compiler and the CPU from doing this as follows:
- a[0] = ACCESS_ONCE(x);
- a[1] = ACCESS_ONCE(x);
+ a[0] = READ_ONCE(x);
+ a[1] = READ_ONCE(x);
- In short, ACCESS_ONCE() provides cache coherence for accesses from
- multiple CPUs to a single variable.
+ In short, READ_ONCE() and WRITE_ONCE() provide cache coherence for
+ accesses from multiple CPUs to a single variable.
(*) The compiler is within its rights to merge successive loads from
the same variable. Such merging can cause the compiler to "optimize"
@@ -1391,9 +1392,9 @@ code. Here are some examples of these sorts of optimizations:
for (;;)
do_something_with(tmp);
- Use ACCESS_ONCE() to prevent the compiler from doing this to you:
+ Use READ_ONCE() to prevent the compiler from doing this to you:
- while (tmp = ACCESS_ONCE(a))
+ while (tmp = READ_ONCE(a))
do_something_with(tmp);
(*) The compiler is within its rights to reload a variable, for example,
@@ -1415,9 +1416,9 @@ code. Here are some examples of these sorts of optimizations:
a was modified by some other CPU between the "while" statement and
the call to do_something_with().
- Again, use ACCESS_ONCE() to prevent the compiler from doing this:
+ Again, use READ_ONCE() to prevent the compiler from doing this:
- while (tmp = ACCESS_ONCE(a))
+ while (tmp = READ_ONCE(a))
do_something_with(tmp);
Note that if the compiler runs short of registers, it might save
@@ -1437,21 +1438,21 @@ code. Here are some examples of these sorts of optimizations:
do { } while (0);
- This transformation is a win for single-threaded code because it gets
- rid of a load and a branch. The problem is that the compiler will
- carry out its proof assuming that the current CPU is the only one
- updating variable 'a'. If variable 'a' is shared, then the compiler's
- proof will be erroneous. Use ACCESS_ONCE() to tell the compiler
- that it doesn't know as much as it thinks it does:
+ This transformation is a win for single-threaded code because it
+ gets rid of a load and a branch. The problem is that the compiler
+ will carry out its proof assuming that the current CPU is the only
+ one updating variable 'a'. If variable 'a' is shared, then the
+ compiler's proof will be erroneous. Use READ_ONCE() to tell the
+ compiler that it doesn't know as much as it thinks it does:
- while (tmp = ACCESS_ONCE(a))
+ while (tmp = READ_ONCE(a))
do_something_with(tmp);
But please note that the compiler is also closely watching what you
- do with the value after the ACCESS_ONCE(). For example, suppose you
+ do with the value after the READ_ONCE(). For example, suppose you
do the following and MAX is a preprocessor macro with the value 1:
- while ((tmp = ACCESS_ONCE(a)) % MAX)
+ while ((tmp = READ_ONCE(a)) % MAX)
do_something_with(tmp);
Then the compiler knows that the result of the "%" operator applied
@@ -1475,12 +1476,12 @@ code. Here are some examples of these sorts of optimizations:
surprise if some other CPU might have stored to variable 'a' in the
meantime.
- Use ACCESS_ONCE() to prevent the compiler from making this sort of
+ Use WRITE_ONCE() to prevent the compiler from making this sort of
wrong guess:
- ACCESS_ONCE(a) = 0;
+ WRITE_ONCE(a, 0);
/* Code that does not store to variable a. */
- ACCESS_ONCE(a) = 0;
+ WRITE_ONCE(a, 0);
(*) The compiler is within its rights to reorder memory accesses unless
you tell it not to. For example, consider the following interaction
@@ -1509,40 +1510,43 @@ code. Here are some examples of these sorts of optimizations:
}
If the interrupt occurs between these two statement, then
- interrupt_handler() might be passed a garbled msg. Use ACCESS_ONCE()
+ interrupt_handler() might be passed a garbled msg. Use WRITE_ONCE()
to prevent this as follows:
void process_level(void)
{
- ACCESS_ONCE(msg) = get_message();
- ACCESS_ONCE(flag) = true;
+ WRITE_ONCE(msg, get_message());
+ WRITE_ONCE(flag, true);
}
void interrupt_handler(void)
{
- if (ACCESS_ONCE(flag))
- process_message(ACCESS_ONCE(msg));
+ if (READ_ONCE(flag))
+ process_message(READ_ONCE(msg));
}
- Note that the ACCESS_ONCE() wrappers in interrupt_handler()
- are needed if this interrupt handler can itself be interrupted
- by something that also accesses 'flag' and 'msg', for example,
- a nested interrupt or an NMI. Otherwise, ACCESS_ONCE() is not
- needed in interrupt_handler() other than for documentation purposes.
- (Note also that nested interrupts do not typically occur in modern
- Linux kernels, in fact, if an interrupt handler returns with
- interrupts enabled, you will get a WARN_ONCE() splat.)
-
- You should assume that the compiler can move ACCESS_ONCE() past
- code not containing ACCESS_ONCE(), barrier(), or similar primitives.
-
- This effect could also be achieved using barrier(), but ACCESS_ONCE()
- is more selective: With ACCESS_ONCE(), the compiler need only forget
- the contents of the indicated memory locations, while with barrier()
- the compiler must discard the value of all memory locations that
- it has currented cached in any machine registers. Of course,
- the compiler must also respect the order in which the ACCESS_ONCE()s
- occur, though the CPU of course need not do so.
+ Note that the READ_ONCE() and WRITE_ONCE() wrappers in
+ interrupt_handler() are needed if this interrupt handler can itself
+ be interrupted by something that also accesses 'flag' and 'msg',
+ for example, a nested interrupt or an NMI. Otherwise, READ_ONCE()
+ and WRITE_ONCE() are not needed in interrupt_handler() other than
+ for documentation purposes. (Note also that nested interrupts
+ do not typically occur in modern Linux kernels, in fact, if an
+ interrupt handler returns with interrupts enabled, you will get a
+ WARN_ONCE() splat.)
+
+ You should assume that the compiler can move READ_ONCE() and
+ WRITE_ONCE() past code not containing READ_ONCE(), WRITE_ONCE(),
+ barrier(), or similar primitives.
+
+ This effect could also be achieved using barrier(), but READ_ONCE()
+ and WRITE_ONCE() are more selective: With READ_ONCE() and
+ WRITE_ONCE(), the compiler need only forget the contents of the
+ indicated memory locations, while with barrier() the compiler must
+ discard the value of all memory locations that it has currented
+ cached in any machine registers. Of course, the compiler must also
+ respect the order in which the READ_ONCE()s and WRITE_ONCE()s occur,
+ though the CPU of course need not do so.
(*) The compiler is within its rights to invent stores to a variable,
as in the following example:
@@ -1562,16 +1566,16 @@ code. Here are some examples of these sorts of optimizations:
a branch. Unfortunately, in concurrent code, this optimization
could cause some other CPU to see a spurious value of 42 -- even
if variable 'a' was never zero -- when loading variable 'b'.
- Use ACCESS_ONCE() to prevent this as follows:
+ Use WRITE_ONCE() to prevent this as follows:
if (a)
- ACCESS_ONCE(b) = a;
+ WRITE_ONCE(b, a);
else
- ACCESS_ONCE(b) = 42;
+ WRITE_ONCE(b, 42);
The compiler can also invent loads. These are usually less
damaging, but they can result in cache-line bouncing and thus in
- poor performance and scalability. Use ACCESS_ONCE() to prevent
+ poor performance and scalability. Use READ_ONCE() to prevent
invented loads.
(*) For aligned memory locations whose size allows them to be accessed
@@ -1590,9 +1594,9 @@ code. Here are some examples of these sorts of optimizations:
This optimization can therefore be a win in single-threaded code.
In fact, a recent bug (since fixed) caused GCC to incorrectly use
this optimization in a volatile store. In the absence of such bugs,
- use of ACCESS_ONCE() prevents store tearing in the following example:
+ use of WRITE_ONCE() prevents store tearing in the following example:
- ACCESS_ONCE(p) = 0x00010002;
+ WRITE_ONCE(p, 0x00010002);
Use of packed structures can also result in load and store tearing,
as in this example:
@@ -1609,22 +1613,23 @@ code. Here are some examples of these sorts of optimizations:
foo2.b = foo1.b;
foo2.c = foo1.c;
- Because there are no ACCESS_ONCE() wrappers and no volatile markings,
- the compiler would be well within its rights to implement these three
- assignment statements as a pair of 32-bit loads followed by a pair
- of 32-bit stores. This would result in load tearing on 'foo1.b'
- and store tearing on 'foo2.b'. ACCESS_ONCE() again prevents tearing
- in this example:
+ Because there are no READ_ONCE() or WRITE_ONCE() wrappers and no
+ volatile markings, the compiler would be well within its rights to
+ implement these three assignment statements as a pair of 32-bit
+ loads followed by a pair of 32-bit stores. This would result in
+ load tearing on 'foo1.b' and store tearing on 'foo2.b'. READ_ONCE()
+ and WRITE_ONCE() again prevent tearing in this example:
foo2.a = foo1.a;
- ACCESS_ONCE(foo2.b) = ACCESS_ONCE(foo1.b);
+ WRITE_ONCE(foo2.b, READ_ONCE(foo1.b));
foo2.c = foo1.c;
-All that aside, it is never necessary to use ACCESS_ONCE() on a variable
-that has been marked volatile. For example, because 'jiffies' is marked
-volatile, it is never necessary to say ACCESS_ONCE(jiffies). The reason
-for this is that ACCESS_ONCE() is implemented as a volatile cast, which
-has no effect when its argument is already marked volatile.
+All that aside, it is never necessary to use READ_ONCE() and
+WRITE_ONCE() on a variable that has been marked volatile. For example,
+because 'jiffies' is marked volatile, it is never necessary to
+say READ_ONCE(jiffies). The reason for this is that READ_ONCE() and
+WRITE_ONCE() are implemented as volatile casts, which has no effect when
+its argument is already marked volatile.
Please note that these compiler barriers have no direct effect on the CPU,
which may then reorder things however it wishes.
@@ -1646,14 +1651,15 @@ The Linux kernel has eight basic CPU memory barriers:
All memory barriers except the data dependency barriers imply a compiler
barrier. Data dependencies do not impose any additional compiler ordering.
-Aside: In the case of data dependencies, the compiler would be expected to
-issue the loads in the correct order (eg. `a[b]` would have to load the value
-of b before loading a[b]), however there is no guarantee in the C specification
-that the compiler may not speculate the value of b (eg. is equal to 1) and load
-a before b (eg. tmp = a[1]; if (b != 1) tmp = a[b]; ). There is also the
-problem of a compiler reloading b after having loaded a[b], thus having a newer
-copy of b than a[b]. A consensus has not yet been reached about these problems,
-however the ACCESS_ONCE macro is a good place to start looking.
+Aside: In the case of data dependencies, the compiler would be expected
+to issue the loads in the correct order (eg. `a[b]` would have to load
+the value of b before loading a[b]), however there is no guarantee in
+the C specification that the compiler may not speculate the value of b
+(eg. is equal to 1) and load a before b (eg. tmp = a[1]; if (b != 1)
+tmp = a[b]; ). There is also the problem of a compiler reloading b after
+having loaded a[b], thus having a newer copy of b than a[b]. A consensus
+has not yet been reached about these problems, however the READ_ONCE()
+macro is a good place to start looking.
SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
systems because it is assumed that a CPU will appear to be self-consistent,
@@ -1848,15 +1854,10 @@ RELEASE are to the same lock variable, but only from the perspective of
another CPU not holding that lock. In short, a ACQUIRE followed by an
RELEASE may -not- be assumed to be a full memory barrier.
-Similarly, the reverse case of a RELEASE followed by an ACQUIRE does not
-imply a full memory barrier. If it is necessary for a RELEASE-ACQUIRE
-pair to produce a full barrier, the ACQUIRE can be followed by an
-smp_mb__after_unlock_lock() invocation. This will produce a full barrier
-if either (a) the RELEASE and the ACQUIRE are executed by the same
-CPU or task, or (b) the RELEASE and ACQUIRE act on the same variable.
-The smp_mb__after_unlock_lock() primitive is free on many architectures.
-Without smp_mb__after_unlock_lock(), the CPU's execution of the critical
-sections corresponding to the RELEASE and the ACQUIRE can cross, so that:
+Similarly, the reverse case of a RELEASE followed by an ACQUIRE does
+not imply a full memory barrier. Therefore, the CPU's execution of the
+critical sections corresponding to the RELEASE and the ACQUIRE can cross,
+so that:
*A = a;
RELEASE M
@@ -1894,29 +1895,6 @@ the RELEASE would simply complete, thereby avoiding the deadlock.
a sleep-unlock race, but the locking primitive needs to resolve
such races properly in any case.
-With smp_mb__after_unlock_lock(), the two critical sections cannot overlap.
-For example, with the following code, the store to *A will always be
-seen by other CPUs before the store to *B:
-
- *A = a;
- RELEASE M
- ACQUIRE N
- smp_mb__after_unlock_lock();
- *B = b;
-
-The operations will always occur in one of the following orders:
-
- STORE *A, RELEASE, ACQUIRE, smp_mb__after_unlock_lock(), STORE *B
- STORE *A, ACQUIRE, RELEASE, smp_mb__after_unlock_lock(), STORE *B
- ACQUIRE, STORE *A, RELEASE, smp_mb__after_unlock_lock(), STORE *B
-
-If the RELEASE and ACQUIRE were instead both operating on the same lock
-variable, only the first of these alternatives can occur. In addition,
-the more strongly ordered systems may rule out some of the above orders.
-But in any case, as noted earlier, the smp_mb__after_unlock_lock()
-ensures that the store to *A will always be seen as happening before
-the store to *B.
-
Locks and semaphores may not provide any guarantee of ordering on UP compiled
systems, and so cannot be counted on in such a situation to actually achieve
anything at all - especially with respect to I/O accesses - unless combined
@@ -2126,12 +2104,12 @@ three CPUs; then should the following sequence of events occur:
CPU 1 CPU 2
=============================== ===============================
- ACCESS_ONCE(*A) = a; ACCESS_ONCE(*E) = e;
+ WRITE_ONCE(*A, a); WRITE_ONCE(*E, e);
ACQUIRE M ACQUIRE Q
- ACCESS_ONCE(*B) = b; ACCESS_ONCE(*F) = f;
- ACCESS_ONCE(*C) = c; ACCESS_ONCE(*G) = g;
+ WRITE_ONCE(*B, b); WRITE_ONCE(*F, f);
+ WRITE_ONCE(*C, c); WRITE_ONCE(*G, g);
RELEASE M RELEASE Q
- ACCESS_ONCE(*D) = d; ACCESS_ONCE(*H) = h;
+ WRITE_ONCE(*D, d); WRITE_ONCE(*H, h);
Then there is no guarantee as to what order CPU 3 will see the accesses to *A
through *H occur in, other than the constraints imposed by the separate locks
@@ -2147,40 +2125,6 @@ But it won't see any of:
*E, *F or *G following RELEASE Q
-However, if the following occurs:
-
- CPU 1 CPU 2
- =============================== ===============================
- ACCESS_ONCE(*A) = a;
- ACQUIRE M [1]
- ACCESS_ONCE(*B) = b;
- ACCESS_ONCE(*C) = c;
- RELEASE M [1]
- ACCESS_ONCE(*D) = d; ACCESS_ONCE(*E) = e;
- ACQUIRE M [2]
- smp_mb__after_unlock_lock();
- ACCESS_ONCE(*F) = f;
- ACCESS_ONCE(*G) = g;
- RELEASE M [2]
- ACCESS_ONCE(*H) = h;
-
-CPU 3 might see:
-
- *E, ACQUIRE M [1], *C, *B, *A, RELEASE M [1],
- ACQUIRE M [2], *H, *F, *G, RELEASE M [2], *D
-
-But assuming CPU 1 gets the lock first, CPU 3 won't see any of:
-
- *B, *C, *D, *F, *G or *H preceding ACQUIRE M [1]
- *A, *B or *C following RELEASE M [1]
- *F, *G or *H preceding ACQUIRE M [2]
- *A, *B, *C, *E, *F or *G following RELEASE M [2]
-
-Note that the smp_mb__after_unlock_lock() is critically important
-here: Without it CPU 3 might see some of the above orderings.
-Without smp_mb__after_unlock_lock(), the accesses are not guaranteed
-to be seen in order unless CPU 3 holds lock M.
-
ACQUIRES VS I/O ACCESSES
------------------------
@@ -2383,9 +2327,7 @@ about the state (old or new) implies an SMP-conditional general memory barrier
explicit lock operations, described later). These include:
xchg();
- cmpxchg();
atomic_xchg(); atomic_long_xchg();
- atomic_cmpxchg(); atomic_long_cmpxchg();
atomic_inc_return(); atomic_long_inc_return();
atomic_dec_return(); atomic_long_dec_return();
atomic_add_return(); atomic_long_add_return();
@@ -2398,7 +2340,9 @@ explicit lock operations, described later). These include:
test_and_clear_bit();
test_and_change_bit();
- /* when succeeds (returns 1) */
+ /* when succeeds */
+ cmpxchg();
+ atomic_cmpxchg(); atomic_long_cmpxchg();
atomic_add_unless(); atomic_long_add_unless();
These are used for such things as implementing ACQUIRE-class and RELEASE-class
@@ -2881,11 +2825,11 @@ A programmer might take it for granted that the CPU will perform memory
operations in exactly the order specified, so that if the CPU is, for example,
given the following piece of code to execute:
- a = ACCESS_ONCE(*A);
- ACCESS_ONCE(*B) = b;
- c = ACCESS_ONCE(*C);
- d = ACCESS_ONCE(*D);
- ACCESS_ONCE(*E) = e;
+ a = READ_ONCE(*A);
+ WRITE_ONCE(*B, b);
+ c = READ_ONCE(*C);
+ d = READ_ONCE(*D);
+ WRITE_ONCE(*E, e);
they would then expect that the CPU will complete the memory operation for each
instruction before moving on to the next one, leading to a definite sequence of
@@ -2932,12 +2876,12 @@ However, it is guaranteed that a CPU will be self-consistent: it will see its
_own_ accesses appear to be correctly ordered, without the need for a memory
barrier. For instance with the following code:
- U = ACCESS_ONCE(*A);
- ACCESS_ONCE(*A) = V;
- ACCESS_ONCE(*A) = W;
- X = ACCESS_ONCE(*A);
- ACCESS_ONCE(*A) = Y;
- Z = ACCESS_ONCE(*A);
+ U = READ_ONCE(*A);
+ WRITE_ONCE(*A, V);
+ WRITE_ONCE(*A, W);
+ X = READ_ONCE(*A);
+ WRITE_ONCE(*A, Y);
+ Z = READ_ONCE(*A);
and assuming no intervention by an external influence, it can be assumed that
the final result will appear to be:
@@ -2953,13 +2897,14 @@ accesses:
U=LOAD *A, STORE *A=V, STORE *A=W, X=LOAD *A, STORE *A=Y, Z=LOAD *A
in that order, but, without intervention, the sequence may have almost any
-combination of elements combined or discarded, provided the program's view of
-the world remains consistent. Note that ACCESS_ONCE() is -not- optional
-in the above example, as there are architectures where a given CPU might
-reorder successive loads to the same location. On such architectures,
-ACCESS_ONCE() does whatever is necessary to prevent this, for example, on
-Itanium the volatile casts used by ACCESS_ONCE() cause GCC to emit the
-special ld.acq and st.rel instructions that prevent such reordering.
+combination of elements combined or discarded, provided the program's view
+of the world remains consistent. Note that READ_ONCE() and WRITE_ONCE()
+are -not- optional in the above example, as there are architectures
+where a given CPU might reorder successive loads to the same location.
+On such architectures, READ_ONCE() and WRITE_ONCE() do whatever is
+necessary to prevent this, for example, on Itanium the volatile casts
+used by READ_ONCE() and WRITE_ONCE() cause GCC to emit the special ld.acq
+and st.rel instructions (respectively) that prevent such reordering.
The compiler may also combine, discard or defer elements of the sequence before
the CPU even sees them.
@@ -2973,13 +2918,14 @@ may be reduced to:
*A = W;
-since, without either a write barrier or an ACCESS_ONCE(), it can be
+since, without either a write barrier or an WRITE_ONCE(), it can be
assumed that the effect of the storage of V to *A is lost. Similarly:
*A = Y;
Z = *A;
-may, without a memory barrier or an ACCESS_ONCE(), be reduced to:
+may, without a memory barrier or an READ_ONCE() and WRITE_ONCE(), be
+reduced to:
*A = Y;
Z = Y;
diff --git a/Documentation/men-chameleon-bus.txt b/Documentation/men-chameleon-bus.txt
new file mode 100644
index 000000000000..30ded732027e
--- /dev/null
+++ b/Documentation/men-chameleon-bus.txt
@@ -0,0 +1,163 @@
+ MEN Chameleon Bus
+ =================
+
+Table of Contents
+=================
+1 Introduction
+ 1.1 Scope of this Document
+ 1.2 Limitations of the current implementation
+2 Architecture
+ 2.1 MEN Chameleon Bus
+ 2.2 Carrier Devices
+ 2.3 Parser
+3 Resource handling
+ 3.1 Memory Resources
+ 3.2 IRQs
+4 Writing an MCB driver
+ 4.1 The driver structure
+ 4.2 Probing and attaching
+ 4.3 Initializing the driver
+
+
+1 Introduction
+===============
+ This document describes the architecture and implementation of the MEN
+ Chameleon Bus (called MCB throughout this document).
+
+1.1 Scope of this Document
+---------------------------
+ This document is intended to be a short overview of the current
+ implementation and does by no means describe the complete possibilities of MCB
+ based devices.
+
+1.2 Limitations of the current implementation
+----------------------------------------------
+ The current implementation is limited to PCI and PCIe based carrier devices
+ that only use a single memory resource and share the PCI legacy IRQ. Not
+ implemented are:
+ - Multi-resource MCB devices like the VME Controller or M-Module carrier.
+ - MCB devices that need another MCB device, like SRAM for a DMA Controller's
+ buffer descriptors or a video controller's video memory.
+ - A per-carrier IRQ domain for carrier devices that have one (or more) IRQs
+ per MCB device like PCIe based carriers with MSI or MSI-X support.
+
+2 Architecture
+===============
+ MCB is divided into 3 functional blocks:
+ - The MEN Chameleon Bus itself,
+ - drivers for MCB Carrier Devices and
+ - the parser for the Chameleon table.
+
+2.1 MEN Chameleon Bus
+----------------------
+ The MEN Chameleon Bus is an artificial bus system that attaches to a so
+ called Chameleon FPGA device found on some hardware produced my MEN Mikro
+ Elektronik GmbH. These devices are multi-function devices implemented in a
+ single FPGA and usually attached via some sort of PCI or PCIe link. Each
+ FPGA contains a header section describing the content of the FPGA. The
+ header lists the device id, PCI BAR, offset from the beginning of the PCI
+ BAR, size in the FPGA, interrupt number and some other properties currently
+ not handled by the MCB implementation.
+
+2.2 Carrier Devices
+--------------------
+ A carrier device is just an abstraction for the real world physical bus the
+ Chameleon FPGA is attached to. Some IP Core drivers may need to interact with
+ properties of the carrier device (like querying the IRQ number of a PCI
+ device). To provide abstraction from the real hardware bus, an MCB carrier
+ device provides callback methods to translate the driver's MCB function calls
+ to hardware related function calls. For example a carrier device may
+ implement the get_irq() method which can be translated into a hardware bus
+ query for the IRQ number the device should use.
+
+2.3 Parser
+-----------
+ The parser reads the first 512 bytes of a Chameleon device and parses the
+ Chameleon table. Currently the parser only supports the Chameleon v2 variant
+ of the Chameleon table but can easily be adopted to support an older or
+ possible future variant. While parsing the table's entries new MCB devices
+ are allocated and their resources are assigned according to the resource
+ assignment in the Chameleon table. After resource assignment is finished, the
+ MCB devices are registered at the MCB and thus at the driver core of the
+ Linux kernel.
+
+3 Resource handling
+====================
+ The current implementation assigns exactly one memory and one IRQ resource
+ per MCB device. But this is likely going to change in the future.
+
+3.1 Memory Resources
+---------------------
+ Each MCB device has exactly one memory resource, which can be requested from
+ the MCB bus. This memory resource is the physical address of the MCB device
+ inside the carrier and is intended to be passed to ioremap() and friends. It
+ is already requested from the kernel by calling request_mem_region().
+
+3.2 IRQs
+---------
+ Each MCB device has exactly one IRQ resource, which can be requested from the
+ MCB bus. If a carrier device driver implements the ->get_irq() callback
+ method, the IRQ number assigned by the carrier device will be returned,
+ otherwise the IRQ number inside the Chameleon table will be returned. This
+ number is suitable to be passed to request_irq().
+
+4 Writing an MCB driver
+=======================
+
+4.1 The driver structure
+-------------------------
+ Each MCB driver has a structure to identify the device driver as well as
+ device ids which identify the IP Core inside the FPGA. The driver structure
+ also contains callback methods which get executed on driver probe and
+ removal from the system.
+
+
+ static const struct mcb_device_id foo_ids[] = {
+ { .device = 0x123 },
+ { }
+ };
+ MODULE_DEVICE_TABLE(mcb, foo_ids);
+
+ static struct mcb_driver foo_driver = {
+ driver = {
+ .name = "foo-bar",
+ .owner = THIS_MODULE,
+ },
+ .probe = foo_probe,
+ .remove = foo_remove,
+ .id_table = foo_ids,
+ };
+
+4.2 Probing and attaching
+--------------------------
+ When a driver is loaded and the MCB devices it services are found, the MCB
+ core will call the driver's probe callback method. When the driver is removed
+ from the system, the MCB core will call the driver's remove callback method.
+
+
+ static init foo_probe(struct mcb_device *mdev, const struct mcb_device_id *id);
+ static void foo_remove(struct mcb_device *mdev);
+
+4.3 Initializing the driver
+----------------------------
+ When the kernel is booted or your foo driver module is inserted, you have to
+ perform driver initialization. Usually it is enough to register your driver
+ module at the MCB core.
+
+
+ static int __init foo_init(void)
+ {
+ return mcb_register_driver(&foo_driver);
+ }
+ module_init(foo_init);
+
+ static void __exit foo_exit(void)
+ {
+ mcb_unregister_driver(&foo_driver);
+ }
+ module_exit(foo_exit);
+
+ The module_mcb_driver() macro can be used to reduce the above code.
+
+
+ module_mcb_driver(foo_driver);
diff --git a/Documentation/misc-devices/mei/mei.txt b/Documentation/misc-devices/mei/mei.txt
index 8d47501bba0a..91c1fa34f48b 100644
--- a/Documentation/misc-devices/mei/mei.txt
+++ b/Documentation/misc-devices/mei/mei.txt
@@ -96,7 +96,7 @@ A code snippet for an application communicating with Intel AMTHI client:
IOCTL
=====
-The Intel MEI Driver supports the following IOCTL command:
+The Intel MEI Driver supports the following IOCTL commands:
IOCTL_MEI_CONNECT_CLIENT Connect to firmware Feature (client).
usage:
@@ -125,6 +125,49 @@ The Intel MEI Driver supports the following IOCTL command:
data that can be sent or received. (e.g. if MTU=2K, can send
requests up to bytes 2k and received responses up to 2k bytes).
+ IOCTL_MEI_NOTIFY_SET: enable or disable event notifications
+
+ Usage:
+ uint32_t enable;
+ ioctl(fd, IOCTL_MEI_NOTIFY_SET, &enable);
+
+ Inputs:
+ uint32_t enable = 1;
+ or
+ uint32_t enable[disable] = 0;
+
+ Error returns:
+ EINVAL Wrong IOCTL Number
+ ENODEV Device is not initialized or the client not connected
+ ENOMEM Unable to allocate memory to client internal data.
+ EFAULT Fatal Error (e.g. Unable to access user input data)
+ EOPNOTSUPP if the device doesn't support the feature
+
+ Notes:
+ The client must be connected in order to enable notification events
+
+
+ IOCTL_MEI_NOTIFY_GET : retrieve event
+
+ Usage:
+ uint32_t event;
+ ioctl(fd, IOCTL_MEI_NOTIFY_GET, &event);
+
+ Outputs:
+ 1 - if an event is pending
+ 0 - if there is no even pending
+
+ Error returns:
+ EINVAL Wrong IOCTL Number
+ ENODEV Device is not initialized or the client not connected
+ ENOMEM Unable to allocate memory to client internal data.
+ EFAULT Fatal Error (e.g. Unable to access user input data)
+ EOPNOTSUPP if the device doesn't support the feature
+
+ Notes:
+ The client must be connected and event notification has to be enabled
+ in order to receive an event
+
Intel ME Applications
=====================
diff --git a/Documentation/networking/6lowpan.txt b/Documentation/networking/6lowpan.txt
new file mode 100644
index 000000000000..a7dc7e939c7a
--- /dev/null
+++ b/Documentation/networking/6lowpan.txt
@@ -0,0 +1,50 @@
+
+Netdev private dataroom for 6lowpan interfaces:
+
+All 6lowpan able net devices, means all interfaces with ARPHRD_6LOWPAN,
+must have "struct lowpan_priv" placed at beginning of netdev_priv.
+
+The priv_size of each interface should be calculate by:
+
+ dev->priv_size = LOWPAN_PRIV_SIZE(LL_6LOWPAN_PRIV_DATA);
+
+Where LL_PRIV_6LOWPAN_DATA is sizeof linklayer 6lowpan private data struct.
+To access the LL_PRIV_6LOWPAN_DATA structure you can cast:
+
+ lowpan_priv(dev)-priv;
+
+to your LL_6LOWPAN_PRIV_DATA structure.
+
+Before registering the lowpan netdev interface you must run:
+
+ lowpan_netdev_setup(dev, LOWPAN_LLTYPE_FOOBAR);
+
+wheres LOWPAN_LLTYPE_FOOBAR is a define for your 6LoWPAN linklayer type of
+enum lowpan_lltypes.
+
+Example to evaluate the private usually you can do:
+
+static inline sturct lowpan_priv_foobar *
+lowpan_foobar_priv(struct net_device *dev)
+{
+ return (sturct lowpan_priv_foobar *)lowpan_priv(dev)->priv;
+}
+
+switch (dev->type) {
+case ARPHRD_6LOWPAN:
+ lowpan_priv = lowpan_priv(dev);
+ /* do great stuff which is ARPHRD_6LOWPAN related */
+ switch (lowpan_priv->lltype) {
+ case LOWPAN_LLTYPE_FOOBAR:
+ /* do 802.15.4 6LoWPAN handling here */
+ lowpan_foobar_priv(dev)->bar = foo;
+ break;
+ ...
+ }
+ break;
+...
+}
+
+In case of generic 6lowpan branch ("net/6lowpan") you can remove the check
+on ARPHRD_6LOWPAN, because you can be sure that these function are called
+by ARPHRD_6LOWPAN interfaces.
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index b48d4a149411..fd1a1aad49a9 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -510,7 +510,7 @@ solution for a couple of reasons:
4.1.2 RAW socket option CAN_RAW_ERR_FILTER
- As described in chapter 3.4 the CAN interface driver can generate so
+ As described in chapter 3.3 the CAN interface driver can generate so
called Error Message Frames that can optionally be passed to the user
application in the same way as other CAN frames. The possible
errors are divided into different error classes that may be filtered
@@ -1152,7 +1152,7 @@ solution for a couple of reasons:
$ ip link set canX type can restart
Note that a restart will also create a CAN error message frame (see
- also chapter 3.4).
+ also chapter 3.3).
6.6 CAN FD (flexible data rate) driver support
diff --git a/Documentation/networking/dsa/bcm_sf2.txt b/Documentation/networking/dsa/bcm_sf2.txt
new file mode 100644
index 000000000000..d999d0c1c5b8
--- /dev/null
+++ b/Documentation/networking/dsa/bcm_sf2.txt
@@ -0,0 +1,114 @@
+Broadcom Starfighter 2 Ethernet switch driver
+=============================================
+
+Broadcom's Starfighter 2 Ethernet switch hardware block is commonly found and
+deployed in the following products:
+
+- xDSL gateways such as BCM63138
+- streaming/multimedia Set Top Box such as BCM7445
+- Cable Modem/residential gateways such as BCM7145/BCM3390
+
+The switch is typically deployed in a configuration involving between 5 to 13
+ports, offering a range of built-in and customizable interfaces:
+
+- single integrated Gigabit PHY
+- quad integrated Gigabit PHY
+- quad external Gigabit PHY w/ MDIO multiplexer
+- integrated MoCA PHY
+- several external MII/RevMII/GMII/RGMII interfaces
+
+The switch also supports specific congestion control features which allow MoCA
+fail-over not to lose packets during a MoCA role re-election, as well as out of
+band back-pressure to the host CPU network interface when downstream interfaces
+are connected at a lower speed.
+
+The switch hardware block is typically interfaced using MMIO accesses and
+contains a bunch of sub-blocks/registers:
+
+* SWITCH_CORE: common switch registers
+* SWITCH_REG: external interfaces switch register
+* SWITCH_MDIO: external MDIO bus controller (there is another one in SWITCH_CORE,
+ which is used for indirect PHY accesses)
+* SWITCH_INDIR_RW: 64-bits wide register helper block
+* SWITCH_INTRL2_0/1: Level-2 interrupt controllers
+* SWITCH_ACB: Admission control block
+* SWITCH_FCB: Fail-over control block
+
+Implementation details
+======================
+
+The driver is located in drivers/net/dsa/bcm_sf2.c and is implemented as a DSA
+driver; see Documentation/networking/dsa/dsa.txt for details on the subsytem
+and what it provides.
+
+The SF2 switch is configured to enable a Broadcom specific 4-bytes switch tag
+which gets inserted by the switch for every packet forwarded to the CPU
+interface, conversely, the CPU network interface should insert a similar tag for
+packets entering the CPU port. The tag format is described in
+net/dsa/tag_brcm.c.
+
+Overall, the SF2 driver is a fairly regular DSA driver; there are a few
+specifics covered below.
+
+Device Tree probing
+-------------------
+
+The DSA platform device driver is probed using a specific compatible string
+provided in net/dsa/dsa.c. The reason for that is because the DSA subsystem gets
+registered as a platform device driver currently. DSA will provide the needed
+device_node pointers which are then accessible by the switch driver setup
+function to setup resources such as register ranges and interrupts. This
+currently works very well because none of the of_* functions utilized by the
+driver require a struct device to be bound to a struct device_node, but things
+may change in the future.
+
+MDIO indirect accesses
+----------------------
+
+Due to a limitation in how Broadcom switches have been designed, external
+Broadcom switches connected to a SF2 require the use of the DSA slave MDIO bus
+in order to properly configure them. By default, the SF2 pseudo-PHY address, and
+an external switch pseudo-PHY address will both be snooping for incoming MDIO
+transactions, since they are at the same address (30), resulting in some kind of
+"double" programming. Using DSA, and setting ds->phys_mii_mask accordingly, we
+selectively divert reads and writes towards external Broadcom switches
+pseudo-PHY addresses. Newer revisions of the SF2 hardware have introduced a
+configurable pseudo-PHY address which circumvents the initial design limitation.
+
+Multimedia over CoAxial (MoCA) interfaces
+-----------------------------------------
+
+MoCA interfaces are fairly specific and require the use of a firmware blob which
+gets loaded onto the MoCA processor(s) for packet processing. The switch
+hardware contains logic which will assert/de-assert link states accordingly for
+the MoCA interface whenever the MoCA coaxial cable gets disconnected or the
+firmware gets reloaded. The SF2 driver relies on such events to properly set its
+MoCA interface carrier state and properly report this to the networking stack.
+
+The MoCA interfaces are supported using the PHY library's fixed PHY/emulated PHY
+device and the switch driver registers a fixed_link_update callback for such
+PHYs which reflects the link state obtained from the interrupt handler.
+
+
+Power Management
+----------------
+
+Whenever possible, the SF2 driver tries to minimize the overall switch power
+consumption by applying a combination of:
+
+- turning off internal buffers/memories
+- disabling packet processing logic
+- putting integrated PHYs in IDDQ/low-power
+- reducing the switch core clock based on the active port count
+- enabling and advertising EEE
+- turning off RGMII data processing logic when the link goes down
+
+Wake-on-LAN
+-----------
+
+Wake-on-LAN is currently implemented by utilizing the host processor Ethernet
+MAC controller wake-on logic. Whenever Wake-on-LAN is requested, an intersection
+between the user request and the supported host Ethernet interface WoL
+capabilities is done and the intersection result gets configured. During
+system-wide suspend/resume, only ports not participating in Wake-on-LAN are
+disabled.
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
new file mode 100644
index 000000000000..aa9c1f9313cd
--- /dev/null
+++ b/Documentation/networking/dsa/dsa.txt
@@ -0,0 +1,615 @@
+Distributed Switch Architecture
+===============================
+
+Introduction
+============
+
+This document describes the Distributed Switch Architecture (DSA) subsystem
+design principles, limitations, interactions with other subsystems, and how to
+develop drivers for this subsystem as well as a TODO for developers interested
+in joining the effort.
+
+Design principles
+=================
+
+The Distributed Switch Architecture is a subsystem which was primarily designed
+to support Marvell Ethernet switches (MV88E6xxx, a.k.a Linkstreet product line)
+using Linux, but has since evolved to support other vendors as well.
+
+The original philosophy behind this design was to be able to use unmodified
+Linux tools such as bridge, iproute2, ifconfig to work transparently whether
+they configured/queried a switch port network device or a regular network
+device.
+
+An Ethernet switch is typically comprised of multiple front-panel ports, and one
+or more CPU or management port. The DSA subsystem currently relies on the
+presence of a management port connected to an Ethernet controller capable of
+receiving Ethernet frames from the switch. This is a very common setup for all
+kinds of Ethernet switches found in Small Home and Office products: routers,
+gateways, or even top-of-the rack switches. This host Ethernet controller will
+be later referred to as "master" and "cpu" in DSA terminology and code.
+
+The D in DSA stands for Distributed, because the subsystem has been designed
+with the ability to configure and manage cascaded switches on top of each other
+using upstream and downstream Ethernet links between switches. These specific
+ports are referred to as "dsa" ports in DSA terminology and code. A collection
+of multiple switches connected to each other is called a "switch tree".
+
+For each front-panel port, DSA will create specialized network devices which are
+used as controlling and data-flowing endpoints for use by the Linux networking
+stack. These specialized network interfaces are referred to as "slave" network
+interfaces in DSA terminology and code.
+
+The ideal case for using DSA is when an Ethernet switch supports a "switch tag"
+which is a hardware feature making the switch insert a specific tag for each
+Ethernet frames it received to/from specific ports to help the management
+interface figure out:
+
+- what port is this frame coming from
+- what was the reason why this frame got forwarded
+- how to send CPU originated traffic to specific ports
+
+The subsystem does support switches not capable of inserting/stripping tags, but
+the features might be slightly limited in that case (traffic separation relies
+on Port-based VLAN IDs).
+
+Note that DSA does not currently create network interfaces for the "cpu" and
+"dsa" ports because:
+
+- the "cpu" port is the Ethernet switch facing side of the management
+ controller, and as such, would create a duplication of feature, since you
+ would get two interfaces for the same conduit: master netdev, and "cpu" netdev
+
+- the "dsa" port(s) are just conduits between two or more switches, and as such
+ cannot really be used as proper network interfaces either, only the
+ downstream, or the top-most upstream interface makes sense with that model
+
+Switch tagging protocols
+------------------------
+
+DSA currently supports 4 different tagging protocols, and a tag-less mode as
+well. The different protocols are implemented in:
+
+net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy)
+net/dsa/tag_dsa.c: Marvell's original DSA tag
+net/dsa/tag_edsa.c: Marvell's enhanced DSA tag
+net/dsa/tag_brcm.c: Broadcom's 4 bytes tag
+
+The exact format of the tag protocol is vendor specific, but in general, they
+all contain something which:
+
+- identifies which port the Ethernet frame came from/should be sent to
+- provides a reason why this frame was forwarded to the management interface
+
+Master network devices
+----------------------
+
+Master network devices are regular, unmodified Linux network device drivers for
+the CPU/management Ethernet interface. Such a driver might occasionally need to
+know whether DSA is enabled (e.g.: to enable/disable specific offload features),
+but the DSA subsystem has been proven to work with industry standard drivers:
+e1000e, mv643xx_eth etc. without having to introduce modifications to these
+drivers. Such network devices are also often referred to as conduit network
+devices since they act as a pipe between the host processor and the hardware
+Ethernet switch.
+
+Networking stack hooks
+----------------------
+
+When a master netdev is used with DSA, a small hook is placed in in the
+networking stack is in order to have the DSA subsystem process the Ethernet
+switch specific tagging protocol. DSA accomplishes this by registering a
+specific (and fake) Ethernet type (later becoming skb->protocol) with the
+networking stack, this is also known as a ptype or packet_type. A typical
+Ethernet Frame receive sequence looks like this:
+
+Master network device (e.g.: e1000e):
+
+Receive interrupt fires:
+- receive function is invoked
+- basic packet processing is done: getting length, status etc.
+- packet is prepared to be processed by the Ethernet layer by calling
+ eth_type_trans
+
+net/ethernet/eth.c:
+
+eth_type_trans(skb, dev)
+ if (dev->dsa_ptr != NULL)
+ -> skb->protocol = ETH_P_XDSA
+
+drivers/net/ethernet/*:
+
+netif_receive_skb(skb)
+ -> iterate over registered packet_type
+ -> invoke handler for ETH_P_XDSA, calls dsa_switch_rcv()
+
+net/dsa/dsa.c:
+ -> dsa_switch_rcv()
+ -> invoke switch tag specific protocol handler in
+ net/dsa/tag_*.c
+
+net/dsa/tag_*.c:
+ -> inspect and strip switch tag protocol to determine originating port
+ -> locate per-port network device
+ -> invoke eth_type_trans() with the DSA slave network device
+ -> invoked netif_receive_skb()
+
+Past this point, the DSA slave network devices get delivered regular Ethernet
+frames that can be processed by the networking stack.
+
+Slave network devices
+---------------------
+
+Slave network devices created by DSA are stacked on top of their master network
+device, each of these network interfaces will be responsible for being a
+controlling and data-flowing end-point for each front-panel port of the switch.
+These interfaces are specialized in order to:
+
+- insert/remove the switch tag protocol (if it exists) when sending traffic
+ to/from specific switch ports
+- query the switch for ethtool operations: statistics, link state,
+ Wake-on-LAN, register dumps...
+- external/internal PHY management: link, auto-negotiation etc.
+
+These slave network devices have custom net_device_ops and ethtool_ops function
+pointers which allow DSA to introduce a level of layering between the networking
+stack/ethtool, and the switch driver implementation.
+
+Upon frame transmission from these slave network devices, DSA will look up which
+switch tagging protocol is currently registered with these network devices, and
+invoke a specific transmit routine which takes care of adding the relevant
+switch tag in the Ethernet frames.
+
+These frames are then queued for transmission using the master network device
+ndo_start_xmit() function, since they contain the appropriate switch tag, the
+Ethernet switch will be able to process these incoming frames from the
+management interface and delivers these frames to the physical switch port.
+
+Graphical representation
+------------------------
+
+Summarized, this is basically how DSA looks like from a network device
+perspective:
+
+
+ |---------------------------
+ | CPU network device (eth0)|
+ ----------------------------
+ | <tag added by switch |
+ | |
+ | |
+ | tag added by CPU> |
+ |--------------------------------------------|
+ | Switch driver |
+ |--------------------------------------------|
+ || || ||
+ |-------| |-------| |-------|
+ | sw0p0 | | sw0p1 | | sw0p2 |
+ |-------| |-------| |-------|
+
+Slave MDIO bus
+--------------
+
+In order to be able to read to/from a switch PHY built into it, DSA creates a
+slave MDIO bus which allows a specific switch driver to divert and intercept
+MDIO reads/writes towards specific PHY addresses. In most MDIO-connected
+switches, these functions would utilize direct or indirect PHY addressing mode
+to return standard MII registers from the switch builtin PHYs, allowing the PHY
+library and/or to return link status, link partner pages, auto-negotiation
+results etc..
+
+For Ethernet switches which have both external and internal MDIO busses, the
+slave MII bus can be utilized to mux/demux MDIO reads and writes towards either
+internal or external MDIO devices this switch might be connected to: internal
+PHYs, external PHYs, or even external switches.
+
+Data structures
+---------------
+
+DSA data structures are defined in include/net/dsa.h as well as
+net/dsa/dsa_priv.h.
+
+dsa_chip_data: platform data configuration for a given switch device, this
+structure describes a switch device's parent device, its address, as well as
+various properties of its ports: names/labels, and finally a routing table
+indication (when cascading switches)
+
+dsa_platform_data: platform device configuration data which can reference a
+collection of dsa_chip_data structure if multiples switches are cascaded, the
+master network device this switch tree is attached to needs to be referenced
+
+dsa_switch_tree: structure assigned to the master network device under
+"dsa_ptr", this structure references a dsa_platform_data structure as well as
+the tagging protocol supported by the switch tree, and which receive/transmit
+function hooks should be invoked, information about the directly attached switch
+is also provided: CPU port. Finally, a collection of dsa_switch are referenced
+to address individual switches in the tree.
+
+dsa_switch: structure describing a switch device in the tree, referencing a
+dsa_switch_tree as a backpointer, slave network devices, master network device,
+and a reference to the backing dsa_switch_driver
+
+dsa_switch_driver: structure referencing function pointers, see below for a full
+description.
+
+Design limitations
+==================
+
+DSA is a platform device driver
+-------------------------------
+
+DSA is implemented as a DSA platform device driver which is convenient because
+it will register the entire DSA switch tree attached to a master network device
+in one-shot, facilitating the device creation and simplifying the device driver
+model a bit, this comes however with a number of limitations:
+
+- building DSA and its switch drivers as modules is currently not working
+- the device driver parenting does not necessarily reflect the original
+ bus/device the switch can be created from
+- supporting non-MDIO and non-MMIO (platform) switches is not possible
+
+Limits on the number of devices and ports
+-----------------------------------------
+
+DSA currently limits the number of maximum switches within a tree to 4
+(DSA_MAX_SWITCHES), and the number of ports per switch to 12 (DSA_MAX_PORTS).
+These limits could be extended to support larger configurations would this need
+arise.
+
+Lack of CPU/DSA network devices
+-------------------------------
+
+DSA does not currently create slave network devices for the CPU or DSA ports, as
+described before. This might be an issue in the following cases:
+
+- inability to fetch switch CPU port statistics counters using ethtool, which
+ can make it harder to debug MDIO switch connected using xMII interfaces
+
+- inability to configure the CPU port link parameters based on the Ethernet
+ controller capabilities attached to it: http://patchwork.ozlabs.org/patch/509806/
+
+- inability to configure specific VLAN IDs / trunking VLANs between switches
+ when using a cascaded setup
+
+Common pitfalls using DSA setups
+--------------------------------
+
+Once a master network device is configured to use DSA (dev->dsa_ptr becomes
+non-NULL), and the switch behind it expects a tagging protocol, this network
+interface can only exclusively be used as a conduit interface. Sending packets
+directly through this interface (e.g.: opening a socket using this interface)
+will not make us go through the switch tagging protocol transmit function, so
+the Ethernet switch on the other end, expecting a tag will typically drop this
+frame.
+
+Slave network devices check that the master network device is UP before allowing
+you to administratively bring UP these slave network devices. A common
+configuration mistake is forgetting to bring UP the master network device first.
+
+Interactions with other subsystems
+==================================
+
+DSA currently leverages the following subsystems:
+
+- MDIO/PHY library: drivers/net/phy/phy.c, mdio_bus.c
+- Switchdev: net/switchdev/*
+- Device Tree for various of_* functions
+- HWMON: drivers/hwmon/*
+
+MDIO/PHY library
+----------------
+
+Slave network devices exposed by DSA may or may not be interfacing with PHY
+devices (struct phy_device as defined in include/linux/phy.h), but the DSA
+subsystem deals with all possible combinations:
+
+- internal PHY devices, built into the Ethernet switch hardware
+- external PHY devices, connected via an internal or external MDIO bus
+- internal PHY devices, connected via an internal MDIO bus
+- special, non-autonegotiated or non MDIO-managed PHY devices: SFPs, MoCA; a.k.a
+ fixed PHYs
+
+The PHY configuration is done by the dsa_slave_phy_setup() function and the
+logic basically looks like this:
+
+- if Device Tree is used, the PHY device is looked up using the standard
+ "phy-handle" property, if found, this PHY device is created and registered
+ using of_phy_connect()
+
+- if Device Tree is used, and the PHY device is "fixed", that is, conforms to
+ the definition of a non-MDIO managed PHY as defined in
+ Documentation/devicetree/bindings/net/fixed-link.txt, the PHY is registered
+ and connected transparently using the special fixed MDIO bus driver
+
+- finally, if the PHY is built into the switch, as is very common with
+ standalone switch packages, the PHY is probed using the slave MII bus created
+ by DSA
+
+
+SWITCHDEV
+---------
+
+DSA directly utilizes SWITCHDEV when interfacing with the bridge layer, and
+more specifically with its VLAN filtering portion when configuring VLANs on top
+of per-port slave network devices. Since DSA primarily deals with
+MDIO-connected switches, although not exclusively, SWITCHDEV's
+prepare/abort/commit phases are often simplified into a prepare phase which
+checks whether the operation is supporte by the DSA switch driver, and a commit
+phase which applies the changes.
+
+As of today, the only SWITCHDEV objects supported by DSA are the FDB and VLAN
+objects.
+
+Device Tree
+-----------
+
+DSA features a standardized binding which is documented in
+Documentation/devicetree/bindings/net/dsa/dsa.txt. PHY/MDIO library helper
+functions such as of_get_phy_mode(), of_phy_connect() are also used to query
+per-port PHY specific details: interface connection, MDIO bus location etc..
+
+HWMON
+-----
+
+Some switch drivers feature internal temperature sensors which are exposed as
+regular HWMON devices in /sys/class/hwmon/.
+
+Driver development
+==================
+
+DSA switch drivers need to implement a dsa_switch_driver structure which will
+contain the various members described below.
+
+register_switch_driver() registers this dsa_switch_driver in its internal list
+of drivers to probe for. unregister_switch_driver() does the exact opposite.
+
+Unless requested differently by setting the priv_size member accordingly, DSA
+does not allocate any driver private context space.
+
+Switch configuration
+--------------------
+
+- priv_size: additional size needed by the switch driver for its private context
+
+- tag_protocol: this is to indicate what kind of tagging protocol is supported,
+ should be a valid value from the dsa_tag_protocol enum
+
+- probe: probe routine which will be invoked by the DSA platform device upon
+ registration to test for the presence/absence of a switch device. For MDIO
+ devices, it is recommended to issue a read towards internal registers using
+ the switch pseudo-PHY and return whether this is a supported device. For other
+ buses, return a non-NULL string
+
+- setup: setup function for the switch, this function is responsible for setting
+ up the dsa_switch_driver private structure with all it needs: register maps,
+ interrupts, mutexes, locks etc.. This function is also expected to properly
+ configure the switch to separate all network interfaces from each other, that
+ is, they should be isolated by the switch hardware itself, typically by creating
+ a Port-based VLAN ID for each port and allowing only the CPU port and the
+ specific port to be in the forwarding vector. Ports that are unused by the
+ platform should be disabled. Past this function, the switch is expected to be
+ fully configured and ready to serve any kind of request. It is recommended
+ to issue a software reset of the switch during this setup function in order to
+ avoid relying on what a previous software agent such as a bootloader/firmware
+ may have previously configured.
+
+- set_addr: Some switches require the programming of the management interface's
+ Ethernet MAC address, switch drivers can also disable ageing of MAC addresses
+ on the management interface and "hardcode"/"force" this MAC address for the
+ CPU/management interface as an optimization
+
+PHY devices and link management
+-------------------------------
+
+- get_phy_flags: Some switches are interfaced to various kinds of Ethernet PHYs,
+ if the PHY library PHY driver needs to know about information it cannot obtain
+ on its own (e.g.: coming from switch memory mapped registers), this function
+ should return a 32-bits bitmask of "flags", that is private between the switch
+ driver and the Ethernet PHY driver in drivers/net/phy/*.
+
+- phy_read: Function invoked by the DSA slave MDIO bus when attempting to read
+ the switch port MDIO registers. If unavailable, return 0xffff for each read.
+ For builtin switch Ethernet PHYs, this function should allow reading the link
+ status, auto-negotiation results, link partner pages etc..
+
+- phy_write: Function invoked by the DSA slave MDIO bus when attempting to write
+ to the switch port MDIO registers. If unavailable return a negative error
+ code.
+
+- poll_link: Function invoked by DSA to query the link state of the switch
+ builtin Ethernet PHYs, per port. This function is responsible for calling
+ netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a
+ single call. Executes from workqueue context.
+
+- adjust_link: Function invoked by the PHY library when a slave network device
+ is attached to a PHY device. This function is responsible for appropriately
+ configuring the switch port link parameters: speed, duplex, pause based on
+ what the phy_device is providing.
+
+- fixed_link_update: Function invoked by the PHY library, and specifically by
+ the fixed PHY driver asking the switch driver for link parameters that could
+ not be auto-negotiated, or obtained by reading the PHY registers through MDIO.
+ This is particularly useful for specific kinds of hardware such as QSGMII,
+ MoCA or other kinds of non-MDIO managed PHYs where out of band link
+ information is obtained
+
+Ethtool operations
+------------------
+
+- get_strings: ethtool function used to query the driver's strings, will
+ typically return statistics strings, private flags strings etc.
+
+- get_ethtool_stats: ethtool function used to query per-port statistics and
+ return their values. DSA overlays slave network devices general statistics:
+ RX/TX counters from the network device, with switch driver specific statistics
+ per port
+
+- get_sset_count: ethtool function used to query the number of statistics items
+
+- get_wol: ethtool function used to obtain Wake-on-LAN settings per-port, this
+ function may, for certain implementations also query the master network device
+ Wake-on-LAN settings if this interface needs to participate in Wake-on-LAN
+
+- set_wol: ethtool function used to configure Wake-on-LAN settings per-port,
+ direct counterpart to set_wol with similar restrictions
+
+- set_eee: ethtool function which is used to configure a switch port EEE (Green
+ Ethernet) settings, can optionally invoke the PHY library to enable EEE at the
+ PHY level if relevant. This function should enable EEE at the switch port MAC
+ controller and data-processing logic
+
+- get_eee: ethtool function which is used to query a switch port EEE settings,
+ this function should return the EEE state of the switch port MAC controller
+ and data-processing logic as well as query the PHY for its currently configured
+ EEE settings
+
+- get_eeprom_len: ethtool function returning for a given switch the EEPROM
+ length/size in bytes
+
+- get_eeprom: ethtool function returning for a given switch the EEPROM contents
+
+- set_eeprom: ethtool function writing specified data to a given switch EEPROM
+
+- get_regs_len: ethtool function returning the register length for a given
+ switch
+
+- get_regs: ethtool function returning the Ethernet switch internal register
+ contents. This function might require user-land code in ethtool to
+ pretty-print register values and registers
+
+Power management
+----------------
+
+- suspend: function invoked by the DSA platform device when the system goes to
+ suspend, should quiesce all Ethernet switch activities, but keep ports
+ participating in Wake-on-LAN active as well as additional wake-up logic if
+ supported
+
+- resume: function invoked by the DSA platform device when the system resumes,
+ should resume all Ethernet switch activities and re-configure the switch to be
+ in a fully active state
+
+- port_enable: function invoked by the DSA slave network device ndo_open
+ function when a port is administratively brought up, this function should be
+ fully enabling a given switch port. DSA takes care of marking the port with
+ BR_STATE_BLOCKING if the port is a bridge member, or BR_STATE_FORWARDING if it
+ was not, and propagating these changes down to the hardware
+
+- port_disable: function invoked by the DSA slave network device ndo_close
+ function when a port is administratively brought down, this function should be
+ fully disabling a given switch port. DSA takes care of marking the port with
+ BR_STATE_DISABLED and propagating changes to the hardware if this port is
+ disabled while being a bridge member
+
+Hardware monitoring
+-------------------
+
+These callbacks are only available if CONFIG_NET_DSA_HWMON is enabled:
+
+- get_temp: this function queries the given switch for its temperature
+
+- get_temp_limit: this function returns the switch current maximum temperature
+ limit
+
+- set_temp_limit: this function configures the maximum temperature limit allowed
+
+- get_temp_alarm: this function returns the critical temperature threshold
+ returning an alarm notification
+
+See Documentation/hwmon/sysfs-interface for details.
+
+Bridge layer
+------------
+
+- port_join_bridge: bridge layer function invoked when a given switch port is
+ added to a bridge, this function should be doing the necessary at the switch
+ level to permit the joining port from being added to the relevant logical
+ domain for it to ingress/egress traffic with other members of the bridge. DSA
+ does nothing but calculate a bitmask of switch ports currently members of the
+ specified bridge being requested the join
+
+- port_leave_bridge: bridge layer function invoked when a given switch port is
+ removed from a bridge, this function should be doing the necessary at the
+ switch level to deny the leaving port from ingress/egress traffic from the
+ remaining bridge members. When the port leaves the bridge, it should be aged
+ out at the switch hardware for the switch to (re) learn MAC addresses behind
+ this port. DSA calculates the bitmask of ports still members of the bridge
+ being left
+
+- port_stp_update: bridge layer function invoked when a given switch port STP
+ state is computed by the bridge layer and should be propagated to switch
+ hardware to forward/block/learn traffic. The switch driver is responsible for
+ computing a STP state change based on current and asked parameters and perform
+ the relevant ageing based on the intersection results
+
+Bridge VLAN filtering
+---------------------
+
+- port_pvid_get: bridge layer function invoked when a Port-based VLAN ID is
+ queried for the given switch port
+
+- port_pvid_set: bridge layer function invoked when a Port-based VLAN ID needs
+ to be configured on the given switch port
+
+- port_vlan_add: bridge layer function invoked when a VLAN is configured
+ (tagged or untagged) for the given switch port
+
+- port_vlan_del: bridge layer function invoked when a VLAN is removed from the
+ given switch port
+
+- vlan_getnext: bridge layer function invoked to query the next configured VLAN
+ in the switch, i.e. returns the bitmaps of members and untagged ports
+
+- port_fdb_add: bridge layer function invoked when the bridge wants to install a
+ Forwarding Database entry, the switch hardware should be programmed with the
+ specified address in the specified VLAN Id in the forwarding database
+ associated with this VLAN ID
+
+Note: VLAN ID 0 corresponds to the port private database, which, in the context
+of DSA, would be the its port-based VLAN, used by the associated bridge device.
+
+- port_fdb_del: bridge layer function invoked when the bridge wants to remove a
+ Forwarding Database entry, the switch hardware should be programmed to delete
+ the specified MAC address from the specified VLAN ID if it was mapped into
+ this port forwarding database
+
+TODO
+====
+
+The platform device problem
+---------------------------
+DSA is currently implemented as a platform device driver which is far from ideal
+as was discussed in this thread:
+
+http://permalink.gmane.org/gmane.linux.network/329848
+
+This basically prevents the device driver model to be properly used and applied,
+and support non-MDIO, non-MMIO Ethernet connected switches.
+
+Another problem with the platform device driver approach is that it prevents the
+use of a modular switch drivers build due to a circular dependency, illustrated
+here:
+
+http://comments.gmane.org/gmane.linux.network/345803
+
+Attempts of reworking this has been done here:
+
+https://lwn.net/Articles/643149/
+
+Making SWITCHDEV and DSA converge towards an unified codebase
+-------------------------------------------------------------
+
+SWITCHDEV properly takes care of abstracting the networking stack with offload
+capable hardware, but does not enforce a strict switch device driver model. On
+the other DSA enforces a fairly strict device driver model, and deals with most
+of the switch specific. At some point we should envision a merger between these
+two subsystems and get the best of both worlds.
+
+Other hanging fruits
+--------------------
+
+- making the number of ports fully dynamic and not dependent on DSA_MAX_PORTS
+- allowing more than one CPU/management interface:
+ http://comments.gmane.org/gmane.linux.network/365657
+- porting more drivers from other vendors:
+ http://comments.gmane.org/gmane.linux.network/365510
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 5fae7704daab..ebe94f2cab98 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -586,6 +586,21 @@ tcp_min_tso_segs - INTEGER
if available window is too small.
Default: 2
+tcp_pacing_ss_ratio - INTEGER
+ sk->sk_pacing_rate is set by TCP stack using a ratio applied
+ to current rate. (current_rate = cwnd * mss / srtt)
+ If TCP is in slow start, tcp_pacing_ss_ratio is applied
+ to let TCP probe for bigger speeds, assuming cwnd can be
+ doubled every other RTT.
+ Default: 200
+
+tcp_pacing_ca_ratio - INTEGER
+ sk->sk_pacing_rate is set by TCP stack using a ratio applied
+ to current rate. (current_rate = cwnd * mss / srtt)
+ If TCP is in congestion avoidance phase, tcp_pacing_ca_ratio
+ is applied to conservatively probe for bigger throughput.
+ Default: 120
+
tcp_tso_win_divisor - INTEGER
This allows control over what percentage of the congestion window
can be consumed by a single TSO frame.
@@ -1181,6 +1196,16 @@ tag - INTEGER
Allows you to write a number, which can be used as required.
Default value is 0.
+xfrm4_gc_thresh - INTEGER
+ The threshold at which we will start garbage collecting for IPv4
+ destination cache entries. At twice this value the system will
+ refuse new allocations.
+
+igmp_link_local_mcast_reports - BOOLEAN
+ Enable IGMP reports for link local multicast groups in the
+ 224.0.0.X range.
+ Default TRUE
+
Alexey Kuznetsov.
kuznet@ms2.inr.ac.ru
@@ -1215,14 +1240,20 @@ flowlabel_consistency - BOOLEAN
FALSE: disabled
Default: TRUE
-auto_flowlabels - BOOLEAN
- Automatically generate flow labels based based on a flow hash
- of the packet. This allows intermediate devices, such as routers,
- to idenfify packet flows for mechanisms like Equal Cost Multipath
+auto_flowlabels - INTEGER
+ Automatically generate flow labels based on a flow hash of the
+ packet. This allows intermediate devices, such as routers, to
+ identify packet flows for mechanisms like Equal Cost Multipath
Routing (see RFC 6438).
- TRUE: enabled
- FALSE: disabled
- Default: false
+ 0: automatic flow labels are completely disabled
+ 1: automatic flow labels are enabled by default, they can be
+ disabled on a per socket basis using the IPV6_AUTOFLOWLABEL
+ socket option
+ 2: automatic flow labels are allowed, they may be enabled on a
+ per socket basis using the IPV6_AUTOFLOWLABEL socket option
+ 3: automatic flow labels are enabled and enforced, they cannot
+ be disabled by the socket option
+ Default: 1
flowlabel_state_ranges - BOOLEAN
Split the flow label number space into two ranges. 0-0x7FFFF is
@@ -1340,6 +1371,14 @@ accept_ra_from_local - BOOLEAN
disabled if accept_ra_from_local is disabled
on a specific interface.
+accept_ra_min_hop_limit - INTEGER
+ Minimum hop limit Information in Router Advertisement.
+
+ Hop limit Information in Router Advertisement less than this
+ variable shall be ignored.
+
+ Default: 1
+
accept_ra_pinfo - BOOLEAN
Learn Prefix Information in Router Advertisement.
@@ -1435,6 +1474,11 @@ mtu - INTEGER
Default Maximum Transfer Unit
Default: 1280 (IPv6 required minimum)
+ip_nonlocal_bind - BOOLEAN
+ If set, allows processes to bind() to non-local IPv6 addresses,
+ which can be quite useful - but may break some applications.
+ Default: 0
+
router_probe_interval - INTEGER
Minimum interval (in seconds) between Router Probing described
in RFC4191.
@@ -1455,6 +1499,13 @@ router_solicitations - INTEGER
routers are present.
Default: 3
+use_oif_addrs_only - BOOLEAN
+ When enabled, the candidate source addresses for destinations
+ routed via this interface are restricted to the set of addresses
+ configured on this interface (vis. RFC 6724, section 4).
+
+ Default: false
+
use_tempaddr - INTEGER
Preference for Privacy Extensions (RFC3041).
<= 0 : disable Privacy Extensions
@@ -1591,6 +1642,11 @@ ratelimit - INTEGER
otherwise the minimal space between responses in milliseconds.
Default: 1000
+xfrm6_gc_thresh - INTEGER
+ The threshold at which we will start garbage collecting for IPv6
+ destination cache entries. At twice this value the system will
+ refuse new allocations.
+
IPv6 Update by:
Pekka Savola <pekkas@netcore.fi>
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index e655e2453c98..d64a14714236 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -135,12 +135,8 @@ struct plat_stmmacenet_data {
int maxmtu;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(void __iomem *ioaddr);
- void *(*setup)(struct platform_device *pdev);
- void (*free)(struct platform_device *pdev, void *priv);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
- void *custom_cfg;
- void *custom_data;
void *bsp_priv;
};
@@ -179,15 +175,11 @@ Where:
o bus_setup: perform HW setup of the bus. For example, on some ST platforms
this field is used to configure the AMBA bridge to generate more
efficient STBus traffic.
- o setup/init/exit: callbacks used for calling a custom initialization;
+ o init/exit: callbacks used for calling a custom initialization;
this is sometime necessary on some platforms (e.g. ST boxes)
where the HW needs to have set some PIO lines or system cfg
- registers. setup should return a pointer to private data,
- which will be stored in bsp_priv, and then passed to init and
- exit callbacks. init/exit callbacks should not use or modify
+ registers. init/exit callbacks should not use or modify
platform data.
- o custom_cfg/custom_data: this is a custom configuration that can be passed
- while initializing the resources.
o bsp_priv: another private pointer.
For MDIO bus The we have:
@@ -262,7 +254,7 @@ static struct fixed_phy_status stmmac0_fixed_phy_status = {
During the board's device_init we can configure the first
MAC for fixed_link by calling:
- fixed_phy_add(PHY_POLL, 1, &stmmac0_fixed_phy_status));)
+ fixed_phy_add(PHY_POLL, 1, &stmmac0_fixed_phy_status, -1);
and the second one, with a real PHY device attached to the bus,
by using the stmmac_mdio_bus_data structure (to provide the id, the
reset procedure etc).
@@ -278,8 +270,6 @@ capability register can replace what has been passed from the platform.
Please see the following document:
Documentation/devicetree/bindings/net/stmmac.txt
-and the stmmac_of_data structure inside the include/linux/stmmac.h header file.
-
4.11) This is a summary of the content of some relevant files:
o stmmac_main.c: to implement the main network device driver;
o stmmac_mdio.c: to provide mdio functions;
diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt
index c5d7ade10ff2..476df0496686 100644
--- a/Documentation/networking/switchdev.txt
+++ b/Documentation/networking/switchdev.txt
@@ -279,8 +279,18 @@ and unknown unicast packets to all ports in domain, if allowed by port's
current STP state. The switch driver, knowing which ports are within which
vlan L2 domain, can program the switch device for flooding. The packet should
also be sent to the port netdev for processing by the bridge driver. The
-bridge should not reflood the packet to the same ports the device flooded.
-XXX: the mechanism to avoid duplicate flood packets is being discuseed.
+bridge should not reflood the packet to the same ports the device flooded,
+otherwise there will be duplicate packets on the wire.
+
+To avoid duplicate packets, the device/driver should mark a packet as already
+forwarded using skb->offload_fwd_mark. The same mark is set on the device
+ports in the domain using dev->offload_fwd_mark. If the skb->offload_fwd_mark
+is non-zero and matches the forwarding egress port's dev->skb_mark, the kernel
+will drop the skb right before transmit on the egress port, with the
+understanding that the device already forwarded the packet on same egress port.
+The driver can use switchdev_port_fwd_mark_set() to set a globally unique mark
+for port's dev->offload_fwd_mark, based on the port's parent ID (switch ID) and
+a group ifindex.
It is possible for the switch device to not handle flooding and push the
packets up to the bridge driver for flooding. This is not ideal as the number
@@ -357,4 +367,5 @@ driver's rocker_port_ipv4_resolve() for an example.
The driver can monitor for updates to arp_tbl using the netevent notifier
NETEVENT_NEIGH_UPDATE. The device can be programmed with resolved nexthops
-for the routes as arp_tbl updates.
+for the routes as arp_tbl updates. The driver implements ndo_neigh_destroy
+to know when arp_tbl neighbor entries are purged from the port.
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index 5f0922613f1a..a977339fbe0a 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -359,6 +359,13 @@ the requested fine-grained filtering for incoming packets is not
supported, the driver may time stamp more than just the requested types
of packets.
+Drivers are free to use a more permissive configuration than the requested
+configuration. It is expected that drivers should only implement directly the
+most generic mode that can be supported. For example if the hardware can
+support HWTSTAMP_FILTER_V2_EVENT, then it should generally always upscale
+HWTSTAMP_FILTER_V2_L2_SYNC_MESSAGE, and so forth, as HWTSTAMP_FILTER_V2_EVENT
+is more generic (and more useful to applications).
+
A driver which supports hardware time stamping shall update the struct
with the actual, possibly more permissive configuration. If the
requested packets cannot be time stamped, then nothing should be
diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt
index 6d993510f091..c28f4989c3f0 100644
--- a/Documentation/networking/vxlan.txt
+++ b/Documentation/networking/vxlan.txt
@@ -1,32 +1,36 @@
Virtual eXtensible Local Area Networking documentation
======================================================
-The VXLAN protocol is a tunnelling protocol that is designed to
-solve the problem of limited number of available VLAN's (4096).
-With VXLAN identifier is expanded to 24 bits.
-
-It is a draft RFC standard, that is implemented by Cisco Nexus,
-Vmware and Brocade. The protocol runs over UDP using a single
-destination port (still not standardized by IANA).
-This document describes the Linux kernel tunnel device,
-there is also an implantation of VXLAN for Openvswitch.
-
-Unlike most tunnels, a VXLAN is a 1 to N network, not just point
-to point. A VXLAN device can either dynamically learn the IP address
-of the other end, in a manner similar to a learning bridge, or the
-forwarding entries can be configured statically.
-
-The management of vxlan is done in a similar fashion to it's
-too closest neighbors GRE and VLAN. Configuring VXLAN requires
-the version of iproute2 that matches the kernel release
-where VXLAN was first merged upstream.
+The VXLAN protocol is a tunnelling protocol designed to solve the
+problem of limited VLAN IDs (4096) in IEEE 802.1q. With VXLAN the
+size of the identifier is expanded to 24 bits (16777216).
+
+VXLAN is described by IETF RFC 7348, and has been implemented by a
+number of vendors. The protocol runs over UDP using a single
+destination port. This document describes the Linux kernel tunnel
+device, there is also a separate implementation of VXLAN for
+Openvswitch.
+
+Unlike most tunnels, a VXLAN is a 1 to N network, not just point to
+point. A VXLAN device can learn the IP address of the other endpoint
+either dynamically in a manner similar to a learning bridge, or make
+use of statically-configured forwarding entries.
+
+The management of vxlan is done in a manner similar to its two closest
+neighbors GRE and VLAN. Configuring VXLAN requires the version of
+iproute2 that matches the kernel release where VXLAN was first merged
+upstream.
1. Create vxlan device
- # ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev eth1
-
-This creates a new device (vxlan0). The device uses the
-the multicast group 239.1.1.1 over eth1 to handle packets where
-no entry is in the forwarding table.
+ # ip link add vxlan0 type vxlan id 42 group 239.1.1.1 dev eth1 dstport 4789
+
+This creates a new device named vxlan0. The device uses the multicast
+group 239.1.1.1 over eth1 to handle traffic for which there is no
+entry in the forwarding table. The destination port number is set to
+the IANA-assigned value of 4789. The Linux implementation of VXLAN
+pre-dates the IANA's selection of a standard destination port number
+and uses the Linux-selected value by default to maintain backwards
+compatibility.
2. Delete vxlan device
# ip link delete vxlan0
diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt
new file mode 100644
index 000000000000..dbd40d879239
--- /dev/null
+++ b/Documentation/nvmem/nvmem.txt
@@ -0,0 +1,152 @@
+ NVMEM SUBSYSTEM
+ Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+This document explains the NVMEM Framework along with the APIs provided,
+and how to use it.
+
+1. Introduction
+===============
+*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to
+retrieve configuration of SOC or Device specific data from non volatile
+memories like eeprom, efuses and so on.
+
+Before this framework existed, NVMEM drivers like eeprom were stored in
+drivers/misc, where they all had to duplicate pretty much the same code to
+register a sysfs file, allow in-kernel users to access the content of the
+devices they were driving, etc.
+
+This was also a problem as far as other in-kernel users were involved, since
+the solutions used were pretty much different from one driver to another, there
+was a rather big abstraction leak.
+
+This framework aims at solve these problems. It also introduces DT
+representation for consumer devices to go get the data they require (MAC
+Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This
+framework is based on regmap, so that most of the abstraction available in
+regmap can be reused, across multiple types of buses.
+
+NVMEM Providers
++++++++++++++++
+
+NVMEM provider refers to an entity that implements methods to initialize, read
+and write the non-volatile memory.
+
+2. Registering/Unregistering the NVMEM provider
+===============================================
+
+A NVMEM provider can register with NVMEM core by supplying relevant
+nvmem configuration to nvmem_register(), on success core would return a valid
+nvmem_device pointer.
+
+nvmem_unregister(nvmem) is used to unregister a previously registered provider.
+
+For example, a simple qfprom case:
+
+static struct nvmem_config econfig = {
+ .name = "qfprom",
+ .owner = THIS_MODULE,
+};
+
+static int qfprom_probe(struct platform_device *pdev)
+{
+ ...
+ econfig.dev = &pdev->dev;
+ nvmem = nvmem_register(&econfig);
+ ...
+}
+
+It is mandatory that the NVMEM provider has a regmap associated with its
+struct device. Failure to do would return error code from nvmem_register().
+
+NVMEM Consumers
++++++++++++++++
+
+NVMEM consumers are the entities which make use of the NVMEM provider to
+read from and to NVMEM.
+
+3. NVMEM cell based consumer APIs
+=================================
+
+NVMEM cells are the data entries/fields in the NVMEM.
+The NVMEM framework provides 3 APIs to read/write NVMEM cells.
+
+struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name);
+struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name);
+
+void nvmem_cell_put(struct nvmem_cell *cell);
+void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+
+void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len);
+int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len);
+
+*nvmem_cell_get() apis will get a reference to nvmem cell for a given id,
+and nvmem_cell_read/write() can then read or write to the cell.
+Once the usage of the cell is finished the consumer should call *nvmem_cell_put()
+to free all the allocation memory for the cell.
+
+4. Direct NVMEM device based consumer APIs
+==========================================
+
+In some instances it is necessary to directly read/write the NVMEM.
+To facilitate such consumers NVMEM framework provides below apis.
+
+struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
+struct nvmem_device *devm_nvmem_device_get(struct device *dev,
+ const char *name);
+void nvmem_device_put(struct nvmem_device *nvmem);
+int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset,
+ size_t bytes, void *buf);
+int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset,
+ size_t bytes, void *buf);
+int nvmem_device_cell_read(struct nvmem_device *nvmem,
+ struct nvmem_cell_info *info, void *buf);
+int nvmem_device_cell_write(struct nvmem_device *nvmem,
+ struct nvmem_cell_info *info, void *buf);
+
+Before the consumers can read/write NVMEM directly, it should get hold
+of nvmem_controller from one of the *nvmem_device_get() api.
+
+The difference between these apis and cell based apis is that these apis always
+take nvmem_device as parameter.
+
+5. Releasing a reference to the NVMEM
+=====================================
+
+When a consumers no longer needs the NVMEM, it has to release the reference
+to the NVMEM it has obtained using the APIs mentioned in the above section.
+The NVMEM framework provides 2 APIs to release a reference to the NVMEM.
+
+void nvmem_cell_put(struct nvmem_cell *cell);
+void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+void nvmem_device_put(struct nvmem_device *nvmem);
+void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem);
+
+Both these APIs are used to release a reference to the NVMEM and
+devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated
+with this NVMEM.
+
+Userspace
++++++++++
+
+6. Userspace binary interface
+==============================
+
+Userspace can read/write the raw NVMEM file located at
+/sys/bus/nvmem/devices/*/nvmem
+
+ex:
+
+hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+0000000 0000 0000 0000 0000 0000 0000 0000 0000
+*
+00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+0000000 0000 0000 0000 0000 0000 0000 0000 0000
+...
+*
+0001000
+
+7. DeviceTree Binding
+=====================
+
+See Documentation/devicetree/bindings/nvmem/nvmem.txt
diff --git a/Documentation/pcmcia/locking.txt b/Documentation/pcmcia/locking.txt
index 68f622bc4064..b2c9b478906b 100644
--- a/Documentation/pcmcia/locking.txt
+++ b/Documentation/pcmcia/locking.txt
@@ -96,7 +96,7 @@ or single-use fields not mentioned):
3. Per PCMCIA-device Data:
--------------------------
-The "main" struct pcmcia_devie is protected as follows (read-only fields
+The "main" struct pcmcia_device is protected as follows (read-only fields
or single-use fields not mentioned):
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index d172bce0fd49..8ba6625fdd63 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -341,6 +341,13 @@ the phases are:
and is entirely responsible for bringing the device back to the
functional state as appropriate.
+ Note that this direct-complete procedure applies even if the device is
+ disabled for runtime PM; only the runtime-PM status matters. It follows
+ that if a device has system-sleep callbacks but does not support runtime
+ PM, then its prepare callback must never return a positive value. This
+ is because all devices are initially set to runtime-suspended with
+ runtime PM disabled.
+
2. The suspend methods should quiesce the device to stop it from performing
I/O. They also may save the device registers and put it into the
appropriate low-power state, depending on the bus type the device is on,
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index e76dc0ad4d2b..0784bc3a2ab5 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -445,10 +445,6 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
bool pm_runtime_status_suspended(struct device *dev);
- return true if the device's runtime PM status is 'suspended'
- bool pm_runtime_suspended_if_enabled(struct device *dev);
- - return true if the device's runtime PM status is 'suspended' and its
- 'power.disable_depth' field is equal to 1
-
void pm_runtime_allow(struct device *dev);
- set the power.runtime_auto flag for the device and decrease its usage
counter (used by the /sys/devices/.../power/control interface to
diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt
index 2850df3bf957..2fc909502db5 100644
--- a/Documentation/power/suspend-and-cpuhotplug.txt
+++ b/Documentation/power/suspend-and-cpuhotplug.txt
@@ -72,7 +72,7 @@ More details follow:
|
v
Disable regular cpu hotplug
- by setting cpu_hotplug_disabled=1
+ by increasing cpu_hotplug_disabled
|
v
Release cpu_add_remove_lock
@@ -89,7 +89,7 @@ Resuming back is likewise, with the counterparts being (in the order of
execution during resume):
* enable_nonboot_cpus() which involves:
| Acquire cpu_add_remove_lock
- | Reset cpu_hotplug_disabled to 0, thereby enabling regular cpu hotplug
+ | Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug
| Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop]
| Release cpu_add_remove_lock
v
@@ -120,7 +120,7 @@ after the entire cycle is complete (i.e., suspend + resume).
Acquire cpu_add_remove_lock
|
v
- If cpu_hotplug_disabled is 1
+ If cpu_hotplug_disabled > 0
return gracefully
|
|
diff --git a/Documentation/powerpc/cxl.txt b/Documentation/powerpc/cxl.txt
index 2a230d01cd8c..205c1b81625c 100644
--- a/Documentation/powerpc/cxl.txt
+++ b/Documentation/powerpc/cxl.txt
@@ -133,7 +133,7 @@ User API
The following file operations are supported on both slave and
master devices.
- A userspace library libcxl is avaliable here:
+ A userspace library libcxl is available here:
https://github.com/ibm-capi/libcxl
This provides a C interface to this kernel API.
diff --git a/Documentation/powerpc/cxlflash.txt b/Documentation/powerpc/cxlflash.txt
new file mode 100644
index 000000000000..4202d1bc583c
--- /dev/null
+++ b/Documentation/powerpc/cxlflash.txt
@@ -0,0 +1,318 @@
+Introduction
+============
+
+ The IBM Power architecture provides support for CAPI (Coherent
+ Accelerator Power Interface), which is available to certain PCIe slots
+ on Power 8 systems. CAPI can be thought of as a special tunneling
+ protocol through PCIe that allow PCIe adapters to look like special
+ purpose co-processors which can read or write an application's
+ memory and generate page faults. As a result, the host interface to
+ an adapter running in CAPI mode does not require the data buffers to
+ be mapped to the device's memory (IOMMU bypass) nor does it require
+ memory to be pinned.
+
+ On Linux, Coherent Accelerator (CXL) kernel services present CAPI
+ devices as a PCI device by implementing a virtual PCI host bridge.
+ This abstraction simplifies the infrastructure and programming
+ model, allowing for drivers to look similar to other native PCI
+ device drivers.
+
+ CXL provides a mechanism by which user space applications can
+ directly talk to a device (network or storage) bypassing the typical
+ kernel/device driver stack. The CXL Flash Adapter Driver enables a
+ user space application direct access to Flash storage.
+
+ The CXL Flash Adapter Driver is a kernel module that sits in the
+ SCSI stack as a low level device driver (below the SCSI disk and
+ protocol drivers) for the IBM CXL Flash Adapter. This driver is
+ responsible for the initialization of the adapter, setting up the
+ special path for user space access, and performing error recovery. It
+ communicates directly the Flash Accelerator Functional Unit (AFU)
+ as described in Documentation/powerpc/cxl.txt.
+
+ The cxlflash driver supports two, mutually exclusive, modes of
+ operation at the device (LUN) level:
+
+ - Any flash device (LUN) can be configured to be accessed as a
+ regular disk device (i.e.: /dev/sdc). This is the default mode.
+
+ - Any flash device (LUN) can be configured to be accessed from
+ user space with a special block library. This mode further
+ specifies the means of accessing the device and provides for
+ either raw access to the entire LUN (referred to as direct
+ or physical LUN access) or access to a kernel/AFU-mediated
+ partition of the LUN (referred to as virtual LUN access). The
+ segmentation of a disk device into virtual LUNs is assisted
+ by special translation services provided by the Flash AFU.
+
+Overview
+========
+
+ The Coherent Accelerator Interface Architecture (CAIA) introduces a
+ concept of a master context. A master typically has special privileges
+ granted to it by the kernel or hypervisor allowing it to perform AFU
+ wide management and control. The master may or may not be involved
+ directly in each user I/O, but at the minimum is involved in the
+ initial setup before the user application is allowed to send requests
+ directly to the AFU.
+
+ The CXL Flash Adapter Driver establishes a master context with the
+ AFU. It uses memory mapped I/O (MMIO) for this control and setup. The
+ Adapter Problem Space Memory Map looks like this:
+
+ +-------------------------------+
+ | 512 * 64 KB User MMIO |
+ | (per context) |
+ | User Accessible |
+ +-------------------------------+
+ | 512 * 128 B per context |
+ | Provisioning and Control |
+ | Trusted Process accessible |
+ +-------------------------------+
+ | 64 KB Global |
+ | Trusted Process accessible |
+ +-------------------------------+
+
+ This driver configures itself into the SCSI software stack as an
+ adapter driver. The driver is the only entity that is considered a
+ Trusted Process to program the Provisioning and Control and Global
+ areas in the MMIO Space shown above. The master context driver
+ discovers all LUNs attached to the CXL Flash adapter and instantiates
+ scsi block devices (/dev/sdb, /dev/sdc etc.) for each unique LUN
+ seen from each path.
+
+ Once these scsi block devices are instantiated, an application
+ written to a specification provided by the block library may get
+ access to the Flash from user space (without requiring a system call).
+
+ This master context driver also provides a series of ioctls for this
+ block library to enable this user space access. The driver supports
+ two modes for accessing the block device.
+
+ The first mode is called a virtual mode. In this mode a single scsi
+ block device (/dev/sdb) may be carved up into any number of distinct
+ virtual LUNs. The virtual LUNs may be resized as long as the sum of
+ the sizes of all the virtual LUNs, along with the meta-data associated
+ with it does not exceed the physical capacity.
+
+ The second mode is called the physical mode. In this mode a single
+ block device (/dev/sdb) may be opened directly by the block library
+ and the entire space for the LUN is available to the application.
+
+ Only the physical mode provides persistence of the data. i.e. The
+ data written to the block device will survive application exit and
+ restart and also reboot. The virtual LUNs do not persist (i.e. do
+ not survive after the application terminates or the system reboots).
+
+
+Block library API
+=================
+
+ Applications intending to get access to the CXL Flash from user
+ space should use the block library, as it abstracts the details of
+ interfacing directly with the cxlflash driver that are necessary for
+ performing administrative actions (i.e.: setup, tear down, resize).
+ The block library can be thought of as a 'user' of services,
+ implemented as IOCTLs, that are provided by the cxlflash driver
+ specifically for devices (LUNs) operating in user space access
+ mode. While it is not a requirement that applications understand
+ the interface between the block library and the cxlflash driver,
+ a high-level overview of each supported service (IOCTL) is provided
+ below.
+
+ The block library can be found on GitHub:
+ http://www.github.com/mikehollinger/ibmcapikv
+
+
+CXL Flash Driver IOCTLs
+=======================
+
+ Users, such as the block library, that wish to interface with a flash
+ device (LUN) via user space access need to use the services provided
+ by the cxlflash driver. As these services are implemented as ioctls,
+ a file descriptor handle must first be obtained in order to establish
+ the communication channel between a user and the kernel. This file
+ descriptor is obtained by opening the device special file associated
+ with the scsi disk device (/dev/sdb) that was created during LUN
+ discovery. As per the location of the cxlflash driver within the
+ SCSI protocol stack, this open is actually not seen by the cxlflash
+ driver. Upon successful open, the user receives a file descriptor
+ (herein referred to as fd1) that should be used for issuing the
+ subsequent ioctls listed below.
+
+ The structure definitions for these IOCTLs are available in:
+ uapi/scsi/cxlflash_ioctl.h
+
+DK_CXLFLASH_ATTACH
+------------------
+
+ This ioctl obtains, initializes, and starts a context using the CXL
+ kernel services. These services specify a context id (u16) by which
+ to uniquely identify the context and its allocated resources. The
+ services additionally provide a second file descriptor (herein
+ referred to as fd2) that is used by the block library to initiate
+ memory mapped I/O (via mmap()) to the CXL flash device and poll for
+ completion events. This file descriptor is intentionally installed by
+ this driver and not the CXL kernel services to allow for intermediary
+ notification and access in the event of a non-user-initiated close(),
+ such as a killed process. This design point is described in further
+ detail in the description for the DK_CXLFLASH_DETACH ioctl.
+
+ There are a few important aspects regarding the "tokens" (context id
+ and fd2) that are provided back to the user:
+
+ - These tokens are only valid for the process under which they
+ were created. The child of a forked process cannot continue
+ to use the context id or file descriptor created by its parent
+ (see DK_CXLFLASH_VLUN_CLONE for further details).
+
+ - These tokens are only valid for the lifetime of the context and
+ the process under which they were created. Once either is
+ destroyed, the tokens are to be considered stale and subsequent
+ usage will result in errors.
+
+ - When a context is no longer needed, the user shall detach from
+ the context via the DK_CXLFLASH_DETACH ioctl.
+
+ - A close on fd2 will invalidate the tokens. This operation is not
+ required by the user.
+
+DK_CXLFLASH_USER_DIRECT
+-----------------------
+ This ioctl is responsible for transitioning the LUN to direct
+ (physical) mode access and configuring the AFU for direct access from
+ user space on a per-context basis. Additionally, the block size and
+ last logical block address (LBA) are returned to the user.
+
+ As mentioned previously, when operating in user space access mode,
+ LUNs may be accessed in whole or in part. Only one mode is allowed
+ at a time and if one mode is active (outstanding references exist),
+ requests to use the LUN in a different mode are denied.
+
+ The AFU is configured for direct access from user space by adding an
+ entry to the AFU's resource handle table. The index of the entry is
+ treated as a resource handle that is returned to the user. The user
+ is then able to use the handle to reference the LUN during I/O.
+
+DK_CXLFLASH_USER_VIRTUAL
+------------------------
+ This ioctl is responsible for transitioning the LUN to virtual mode
+ of access and configuring the AFU for virtual access from user space
+ on a per-context basis. Additionally, the block size and last logical
+ block address (LBA) are returned to the user.
+
+ As mentioned previously, when operating in user space access mode,
+ LUNs may be accessed in whole or in part. Only one mode is allowed
+ at a time and if one mode is active (outstanding references exist),
+ requests to use the LUN in a different mode are denied.
+
+ The AFU is configured for virtual access from user space by adding
+ an entry to the AFU's resource handle table. The index of the entry
+ is treated as a resource handle that is returned to the user. The
+ user is then able to use the handle to reference the LUN during I/O.
+
+ By default, the virtual LUN is created with a size of 0. The user
+ would need to use the DK_CXLFLASH_VLUN_RESIZE ioctl to adjust the grow
+ the virtual LUN to a desired size. To avoid having to perform this
+ resize for the initial creation of the virtual LUN, the user has the
+ option of specifying a size as part of the DK_CXLFLASH_USER_VIRTUAL
+ ioctl, such that when success is returned to the user, the
+ resource handle that is provided is already referencing provisioned
+ storage. This is reflected by the last LBA being a non-zero value.
+
+DK_CXLFLASH_VLUN_RESIZE
+-----------------------
+ This ioctl is responsible for resizing a previously created virtual
+ LUN and will fail if invoked upon a LUN that is not in virtual
+ mode. Upon success, an updated last LBA is returned to the user
+ indicating the new size of the virtual LUN associated with the
+ resource handle.
+
+ The partitioning of virtual LUNs is jointly mediated by the cxlflash
+ driver and the AFU. An allocation table is kept for each LUN that is
+ operating in the virtual mode and used to program a LUN translation
+ table that the AFU references when provided with a resource handle.
+
+DK_CXLFLASH_RELEASE
+-------------------
+ This ioctl is responsible for releasing a previously obtained
+ reference to either a physical or virtual LUN. This can be
+ thought of as the inverse of the DK_CXLFLASH_USER_DIRECT or
+ DK_CXLFLASH_USER_VIRTUAL ioctls. Upon success, the resource handle
+ is no longer valid and the entry in the resource handle table is
+ made available to be used again.
+
+ As part of the release process for virtual LUNs, the virtual LUN
+ is first resized to 0 to clear out and free the translation tables
+ associated with the virtual LUN reference.
+
+DK_CXLFLASH_DETACH
+------------------
+ This ioctl is responsible for unregistering a context with the
+ cxlflash driver and release outstanding resources that were
+ not explicitly released via the DK_CXLFLASH_RELEASE ioctl. Upon
+ success, all "tokens" which had been provided to the user from the
+ DK_CXLFLASH_ATTACH onward are no longer valid.
+
+DK_CXLFLASH_VLUN_CLONE
+----------------------
+ This ioctl is responsible for cloning a previously created
+ context to a more recently created context. It exists solely to
+ support maintaining user space access to storage after a process
+ forks. Upon success, the child process (which invoked the ioctl)
+ will have access to the same LUNs via the same resource handle(s)
+ and fd2 as the parent, but under a different context.
+
+ Context sharing across processes is not supported with CXL and
+ therefore each fork must be met with establishing a new context
+ for the child process. This ioctl simplifies the state management
+ and playback required by a user in such a scenario. When a process
+ forks, child process can clone the parents context by first creating
+ a context (via DK_CXLFLASH_ATTACH) and then using this ioctl to
+ perform the clone from the parent to the child.
+
+ The clone itself is fairly simple. The resource handle and lun
+ translation tables are copied from the parent context to the child's
+ and then synced with the AFU.
+
+DK_CXLFLASH_VERIFY
+------------------
+ This ioctl is used to detect various changes such as the capacity of
+ the disk changing, the number of LUNs visible changing, etc. In cases
+ where the changes affect the application (such as a LUN resize), the
+ cxlflash driver will report the changed state to the application.
+
+ The user calls in when they want to validate that a LUN hasn't been
+ changed in response to a check condition. As the user is operating out
+ of band from the kernel, they will see these types of events without
+ the kernel's knowledge. When encountered, the user's architected
+ behavior is to call in to this ioctl, indicating what they want to
+ verify and passing along any appropriate information. For now, only
+ verifying a LUN change (ie: size different) with sense data is
+ supported.
+
+DK_CXLFLASH_RECOVER_AFU
+-----------------------
+ This ioctl is used to drive recovery (if such an action is warranted)
+ of a specified user context. Any state associated with the user context
+ is re-established upon successful recovery.
+
+ User contexts are put into an error condition when the device needs to
+ be reset or is terminating. Users are notified of this error condition
+ by seeing all 0xF's on an MMIO read. Upon encountering this, the
+ architected behavior for a user is to call into this ioctl to recover
+ their context. A user may also call into this ioctl at any time to
+ check if the device is operating normally. If a failure is returned
+ from this ioctl, the user is expected to gracefully clean up their
+ context via release/detach ioctls. Until they do, the context they
+ hold is not relinquished. The user may also optionally exit the process
+ at which time the context/resources they held will be freed as part of
+ the release fop.
+
+DK_CXLFLASH_MANAGE_LUN
+----------------------
+ This ioctl is used to switch a LUN from a mode where it is available
+ for file-system access (legacy), to a mode where it is set aside for
+ exclusive user space access (superpipe). In case a LUN is visible
+ across multiple ports and adapters, this ioctl is used to uniquely
+ identify each LUN by its World Wide Node Name (WWNN).
diff --git a/Documentation/powerpc/dscr.txt b/Documentation/powerpc/dscr.txt
index 1ff4400c57b3..ece300c64f76 100644
--- a/Documentation/powerpc/dscr.txt
+++ b/Documentation/powerpc/dscr.txt
@@ -4,7 +4,7 @@
DSCR register in powerpc allows user to have some control of prefetch of data
stream in the processor. Please refer to the ISA documents or related manual
for more detailed information regarding how to use this DSCR to attain this
-control of the pefetches . This document here provides an overview of kernel
+control of the prefetches . This document here provides an overview of kernel
support for DSCR, related kernel objects, it's functionalities and exported
user interface.
@@ -44,7 +44,7 @@ user interface.
value into every CPU's DSCR register right away and updates the current
thread's DSCR value as well.
- Changing the CPU specif DSCR default value in the sysfs does exactly
+ Changing the CPU specific DSCR default value in the sysfs does exactly
the same thing as above but unlike the global one above, it just changes
stuff for that particular CPU instead for all the CPUs on the system.
@@ -62,7 +62,7 @@ user interface.
Accessing DSCR through user level SPR (0x03) from user space will first
create a facility unavailable exception. Inside this exception handler
- all mfspr isntruction based read attempts will get emulated and returned
+ all mfspr instruction based read attempts will get emulated and returned
where as the first mtspr instruction based write attempts will enable
the DSCR facility for the next time around (both for read and write) by
setting DSCR facility in the FSCR register.
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 2031ddb33d09..e7ac24aec4ff 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -117,7 +117,7 @@ specific been defined. This table describes the structure.
Extended Modes
This is a double word bit array (64 bits) that defines special functionality
-which has an impact on the softwarew drivers. Each bit has its own impact
+which has an impact on the software drivers. Each bit has its own impact
and has special instructions for the s/w associated with it. This structure is
described in this table:
diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt
index c508cceeee7d..7cb7264ad598 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/pps/pps.txt
@@ -125,7 +125,7 @@ The same function may also run the defined echo function
(pps_ktimer_echo(), passing to it the "ptr" pointer) if the user
asked for that... etc..
-Please see the file drivers/pps/clients/ktimer.c for example code.
+Please see the file drivers/pps/clients/pps-ktimer.c for example code.
SYSFS support
diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX
index 10c874ebdfe5..9189535f6cd2 100644
--- a/Documentation/s390/00-INDEX
+++ b/Documentation/s390/00-INDEX
@@ -16,8 +16,6 @@ Debugging390.txt
- hints for debugging on s390 systems.
driver-model.txt
- information on s390 devices and the driver model.
-kvm.txt
- - ioctl calls to /dev/kvm on s390.
monreader.txt
- information on accessing the z/VM monitor stream from Linux.
qeth.txt
diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt
deleted file mode 100644
index 85f3280d7ef6..000000000000
--- a/Documentation/s390/kvm.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-*** BIG FAT WARNING ***
-The kvm module is currently in EXPERIMENTAL state for s390. This means that
-the interface to the module is not yet considered to remain stable. Thus, be
-prepared that we keep breaking your userspace application and guest
-compatibility over and over again until we feel happy with the result. Make sure
-your guest kernel, your host kernel, and your userspace launcher are in a
-consistent state.
-
-This Documentation describes the unique ioctl calls to /dev/kvm, the resulting
-kvm-vm file descriptors, and the kvm-vcpu file descriptors that differ from x86.
-
-1. ioctl calls to /dev/kvm
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_GET_API_VERSION
-KVM_CREATE_VM (*) see note
-KVM_CHECK_EXTENSION
-KVM_GET_VCPU_MMAP_SIZE
-
-Notes:
-* KVM_CREATE_VM may fail on s390, if the calling process has multiple
-threads and has not called KVM_S390_ENABLE_SIE before.
-
-In addition, on s390 the following architecture specific ioctls are supported:
-ioctl: KVM_S390_ENABLE_SIE
-args: none
-see also: include/linux/kvm.h
-This call causes the kernel to switch on PGSTE in the user page table. This
-operation is needed in order to run a virtual machine, and it requires the
-calling process to be single-threaded. Note that the first call to KVM_CREATE_VM
-will implicitly try to switch on PGSTE if the user process has not called
-KVM_S390_ENABLE_SIE before. User processes that want to launch multiple threads
-before creating a virtual machine have to call KVM_S390_ENABLE_SIE, or will
-observe an error calling KVM_CREATE_VM. Switching on PGSTE is a one-time
-operation, is not reversible, and will persist over the entire lifetime of
-the calling process. It does not have any user-visible effect other than a small
-performance penalty.
-
-2. ioctl calls to the kvm-vm file descriptor
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_CREATE_VCPU
-KVM_SET_USER_MEMORY_REGION (*) see note
-KVM_GET_DIRTY_LOG (**) see note
-
-Notes:
-* kvm does only allow exactly one memory slot on s390, which has to start
- at guest absolute address zero and at a user address that is aligned on any
- page boundary. This hardware "limitation" allows us to have a few unique
- optimizations. The memory slot doesn't have to be filled
- with memory actually, it may contain sparse holes. That said, with different
- user memory layout this does still allow a large flexibility when
- doing the guest memory setup.
-** KVM_GET_DIRTY_LOG doesn't work properly yet. The user will receive an empty
-log. This ioctl call is only needed for guest migration, and we intend to
-implement this one in the future.
-
-In addition, on s390 the following architecture specific ioctls for the kvm-vm
-file descriptor are supported:
-ioctl: KVM_S390_INTERRUPT
-args: struct kvm_s390_interrupt *
-see also: include/linux/kvm.h
-This ioctl is used to submit a floating interrupt for a virtual machine.
-Floating interrupts may be delivered to any virtual cpu in the configuration.
-Only some interrupt types defined in include/linux/kvm.h make sense when
-submitted as floating interrupts. The following interrupts are not considered
-to be useful as floating interrupts, and a call to inject them will result in
--EINVAL error code: program interrupts and interprocessor signals. Valid
-floating interrupts are:
-KVM_S390_INT_VIRTIO
-KVM_S390_INT_SERVICE
-
-3. ioctl calls to the kvm-vcpu file descriptor
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_RUN
-KVM_GET_REGS
-KVM_SET_REGS
-KVM_GET_SREGS
-KVM_SET_SREGS
-KVM_GET_FPU
-KVM_SET_FPU
-
-In addition, on s390 the following architecture specific ioctls for the
-kvm-vcpu file descriptor are supported:
-ioctl: KVM_S390_INTERRUPT
-args: struct kvm_s390_interrupt *
-see also: include/linux/kvm.h
-This ioctl is used to submit an interrupt for a specific virtual cpu.
-Only some interrupt types defined in include/linux/kvm.h make sense when
-submitted for a specific cpu. The following interrupts are not considered
-to be useful, and a call to inject them will result in -EINVAL error code:
-service processor calls and virtio interrupts. Valid interrupt types are:
-KVM_S390_PROGRAM_INT
-KVM_S390_SIGP_STOP
-KVM_S390_RESTART
-KVM_S390_SIGP_SET_PREFIX
-KVM_S390_INT_EMERGENCY
-
-ioctl: KVM_S390_STORE_STATUS
-args: unsigned long
-see also: include/linux/kvm.h
-This ioctl stores the state of the cpu at the guest real address given as
-argument, unless one of the following values defined in include/linux/kvm.h
-is given as argument:
-KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in
-absolute lowcore as defined by the principles of operation
-KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in
-its prefix page just like the dump tool that comes with zipl. This is useful
-to create a system dump for use with lkcdutils or crash.
-
-ioctl: KVM_S390_SET_INITIAL_PSW
-args: struct kvm_s390_psw *
-see also: include/linux/kvm.h
-This ioctl can be used to set the processor status word (psw) of a stopped cpu
-prior to running it with KVM_RUN. Note that this call is not required to modify
-the psw during sie intercepts that fall back to userspace because struct kvm_run
-does contain the psw, and this value is evaluated during reentry of KVM_RUN
-after the intercept exit was recognized.
-
-ioctl: KVM_S390_INITIAL_RESET
-args: none
-see also: include/linux/kvm.h
-This ioctl can be used to perform an initial cpu reset as defined by the
-principles of operation. The target cpu has to be in stopped state.
diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt
index c4407a41b0fc..f4cb0b2d5cd7 100644
--- a/Documentation/static-keys.txt
+++ b/Documentation/static-keys.txt
@@ -1,7 +1,22 @@
Static Keys
-----------
-By: Jason Baron <jbaron@redhat.com>
+DEPRECATED API:
+
+The use of 'struct static_key' directly, is now DEPRECATED. In addition
+static_key_{true,false}() is also DEPRECATED. IE DO NOT use the following:
+
+struct static_key false = STATIC_KEY_INIT_FALSE;
+struct static_key true = STATIC_KEY_INIT_TRUE;
+static_key_true()
+static_key_false()
+
+The updated API replacements are:
+
+DEFINE_STATIC_KEY_TRUE(key);
+DEFINE_STATIC_KEY_FALSE(key);
+static_key_likely()
+statick_key_unlikely()
0) Abstract
@@ -9,22 +24,22 @@ Static keys allows the inclusion of seldom used features in
performance-sensitive fast-path kernel code, via a GCC feature and a code
patching technique. A quick example:
- struct static_key key = STATIC_KEY_INIT_FALSE;
+ DEFINE_STATIC_KEY_FALSE(key);
...
- if (static_key_false(&key))
+ if (static_branch_unlikely(&key))
do unlikely code
else
do likely code
...
- static_key_slow_inc();
+ static_branch_enable(&key);
...
- static_key_slow_inc();
+ static_branch_disable(&key);
...
-The static_key_false() branch will be generated into the code with as little
+The static_branch_unlikely() branch will be generated into the code with as little
impact to the likely code path as possible.
@@ -56,7 +71,7 @@ the branch site to change the branch direction.
For example, if we have a simple branch that is disabled by default:
- if (static_key_false(&key))
+ if (static_branch_unlikely(&key))
printk("I am the true branch\n");
Thus, by default the 'printk' will not be emitted. And the code generated will
@@ -75,68 +90,55 @@ the basis for the static keys facility.
In order to make use of this optimization you must first define a key:
- struct static_key key;
-
-Which is initialized as:
-
- struct static_key key = STATIC_KEY_INIT_TRUE;
+ DEFINE_STATIC_KEY_TRUE(key);
or:
- struct static_key key = STATIC_KEY_INIT_FALSE;
+ DEFINE_STATIC_KEY_FALSE(key);
+
-If the key is not initialized, it is default false. The 'struct static_key',
-must be a 'global'. That is, it can't be allocated on the stack or dynamically
+The key must be global, that is, it can't be allocated on the stack or dynamically
allocated at run-time.
The key is then used in code as:
- if (static_key_false(&key))
+ if (static_branch_unlikely(&key))
do unlikely code
else
do likely code
Or:
- if (static_key_true(&key))
+ if (static_branch_likely(&key))
do likely code
else
do unlikely code
-A key that is initialized via 'STATIC_KEY_INIT_FALSE', must be used in a
-'static_key_false()' construct. Likewise, a key initialized via
-'STATIC_KEY_INIT_TRUE' must be used in a 'static_key_true()' construct. A
-single key can be used in many branches, but all the branches must match the
-way that the key has been initialized.
+Keys defined via DEFINE_STATIC_KEY_TRUE(), or DEFINE_STATIC_KEY_FALSE, may
+be used in either static_branch_likely() or static_branch_unlikely()
+statemnts.
-The branch(es) can then be switched via:
+Branch(es) can be set true via:
- static_key_slow_inc(&key);
- ...
- static_key_slow_dec(&key);
+static_branch_enable(&key);
-Thus, 'static_key_slow_inc()' means 'make the branch true', and
-'static_key_slow_dec()' means 'make the branch false' with appropriate
-reference counting. For example, if the key is initialized true, a
-static_key_slow_dec(), will switch the branch to false. And a subsequent
-static_key_slow_inc(), will change the branch back to true. Likewise, if the
-key is initialized false, a 'static_key_slow_inc()', will change the branch to
-true. And then a 'static_key_slow_dec()', will again make the branch false.
+or false via:
+
+static_branch_disable(&key);
-An example usage in the kernel is the implementation of tracepoints:
+The branch(es) can then be switched via reference counts:
- static inline void trace_##name(proto) \
- { \
- if (static_key_false(&__tracepoint_##name.key)) \
- __DO_TRACE(&__tracepoint_##name, \
- TP_PROTO(data_proto), \
- TP_ARGS(data_args), \
- TP_CONDITION(cond)); \
- }
+ static_branch_inc(&key);
+ ...
+ static_branch_dec(&key);
-Tracepoints are disabled by default, and can be placed in performance critical
-pieces of the kernel. Thus, by using a static key, the tracepoints can have
-absolutely minimal impact when not in use.
+Thus, 'static_branch_inc()' means 'make the branch true', and
+'static_branch_dec()' means 'make the branch false' with appropriate
+reference counting. For example, if the key is initialized true, a
+static_branch_dec(), will switch the branch to false. And a subsequent
+static_branch_inc(), will change the branch back to true. Likewise, if the
+key is initialized false, a 'static_branch_inc()', will change the branch to
+true. And then a 'static_branch_dec()', will again make the branch false.
4) Architecture level code patching interface, 'jump labels'
@@ -150,9 +152,12 @@ simply fall back to a traditional, load, test, and jump sequence.
* #define JUMP_LABEL_NOP_SIZE, see: arch/x86/include/asm/jump_label.h
-* __always_inline bool arch_static_branch(struct static_key *key), see:
+* __always_inline bool arch_static_branch(struct static_key *key, bool branch), see:
arch/x86/include/asm/jump_label.h
+* __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch),
+ see: arch/x86/include/asm/jump_label.h
+
* void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type),
see: arch/x86/kernel/jump_label.c
@@ -173,7 +178,7 @@ SYSCALL_DEFINE0(getppid)
{
int pid;
-+ if (static_key_false(&key))
++ if (static_branch_unlikely(&key))
+ printk("I am the true branch\n");
rcu_read_lock();
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 9832ec52f859..9c3f2f8054b5 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -225,11 +225,11 @@ with your system. To disable them, echo 4 (bit 3) into drop_caches.
extfrag_threshold
This parameter affects whether the kernel will compact memory or direct
-reclaim to satisfy a high-order allocation. /proc/extfrag_index shows what
-the fragmentation index for each order is in each zone in the system. Values
-tending towards 0 imply allocations would fail due to lack of memory,
-values towards 1000 imply failures are due to fragmentation and -1 implies
-that the allocation will succeed as long as watermarks are met.
+reclaim to satisfy a high-order allocation. The extfrag/extfrag_index file in
+debugfs shows what the fragmentation index for each order is in each zone in
+the system. Values tending towards 0 imply allocations would fail due to lack
+of memory, values towards 1000 imply failures are due to fragmentation and -1
+implies that the allocation will succeed as long as watermarks are met.
The kernel will not compact memory in a zone if the
fragmentation index is <= extfrag_threshold. The default value is 500.
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 0e307c94809a..267f39386f99 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -119,6 +119,7 @@ On all - write a character to /proc/sysrq-trigger. e.g.:
'x' - Used by xmon interface on ppc/powerpc platforms.
Show global PMU Registers on sparc64.
+ Dump all TLB entries on MIPS.
'y' - Show global CPU Registers [SPARC-64 specific]
diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt
index 77d14d51a670..0a5c3290e732 100644
--- a/Documentation/trace/coresight.txt
+++ b/Documentation/trace/coresight.txt
@@ -15,7 +15,7 @@ HW assisted tracing is becoming increasingly useful when dealing with systems
that have many SoCs and other components like GPU and DMA engines. ARM has
developed a HW assisted tracing solution by means of different components, each
being added to a design at synthesis time to cater to specific tracing needs.
-Compoments are generally categorised as source, link and sinks and are
+Components are generally categorised as source, link and sinks and are
(usually) discovered using the AMBA bus.
"Sources" generate a compressed stream representing the processor instruction
@@ -138,7 +138,7 @@ void coresight_unregister(struct coresight_device *csdev);
The registering function is taking a "struct coresight_device *csdev" and
register the device with the core framework. The unregister function takes
-a reference to a "strut coresight_device", obtained at registration time.
+a reference to a "struct coresight_device", obtained at registration time.
If everything goes well during the registration process the new devices will
show up under /sys/bus/coresight/devices, as showns here for a TC2 platform:
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 7ddb1e319f84..87bb4aa6a6b9 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -346,6 +346,11 @@ of ftrace. Here is a list of some of the key files:
x86-tsc: Architectures may define their own clocks. For
example, x86 uses its own TSC cycle clock here.
+ ppc-tb: This uses the powerpc timebase register value.
+ This is in sync across CPUs and can also be used
+ to correlate events across hypervisor/guest if
+ tb_offset is known.
+
To set a clock, simply echo the clock name into this file.
echo global > trace_clock
diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt
index 592678009c15..b24d3ef89166 100644
--- a/Documentation/usb/gadget-testing.txt
+++ b/Documentation/usb/gadget-testing.txt
@@ -237,9 +237,7 @@ Testing the LOOPBACK function
-----------------------------
device: run the gadget
-host: test-usb
-
-http://www.linux-usb.org/usbtest/testusb.c
+host: test-usb (tools/usb/testusb.c)
8. MASS STORAGE function
========================
@@ -586,9 +584,8 @@ Testing the SOURCESINK function
-------------------------------
device: run the gadget
-host: test-usb
+host: test-usb (tools/usb/testusb.c)
-http://www.linux-usb.org/usbtest/testusb.c
16. UAC1 function
=================
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index b5f83911732a..4a15c90bc11d 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -521,10 +521,10 @@ enabling hardware LPM, the host can automatically put the device into
lower power state(L1 for usb2.0 devices, or U1/U2 for usb3.0 devices),
which state device can enter and resume very quickly.
-The user interface for controlling USB2 hardware LPM is located in the
+The user interface for controlling hardware LPM is located in the
power/ subdirectory of each USB device's sysfs directory, that is, in
/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The
-relevant attribute files is usb2_hardware_lpm.
+relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm.
power/usb2_hardware_lpm
@@ -537,6 +537,17 @@ relevant attribute files is usb2_hardware_lpm.
can write y/Y/1 or n/N/0 to the file to enable/disable
USB2 hardware LPM manually. This is for test purpose mainly.
+ power/usb3_hardware_lpm
+
+ When a USB 3.0 lpm-capable device is plugged in to a
+ xHCI host which supports link PM, it will check if U1
+ and U2 exit latencies have been set in the BOS
+ descriptor; if the check is is passed and the host
+ supports USB3 hardware LPM, USB3 hardware LPM will be
+ enabled for the device and this file will be created.
+ The file holds a string value (enable or disable)
+ indicating whether or not USB3 hardware LPM is
+ enabled for the device.
USB Port Power Control
----------------------
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index a7926a90156f..a4ebcb712375 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -3277,6 +3277,7 @@ should put the acknowledged interrupt vector into the 'epr' field.
struct {
#define KVM_SYSTEM_EVENT_SHUTDOWN 1
#define KVM_SYSTEM_EVENT_RESET 2
+#define KVM_SYSTEM_EVENT_CRASH 3
__u32 type;
__u64 flags;
} system_event;
@@ -3296,6 +3297,10 @@ Valid values for 'type' are:
KVM_SYSTEM_EVENT_RESET -- the guest has requested a reset of the VM.
As with SHUTDOWN, userspace can choose to ignore the request, or
to schedule the reset to occur in the future and may call KVM_RUN again.
+ KVM_SYSTEM_EVENT_CRASH -- the guest crash occurred and the guest
+ has requested a crash condition maintenance. Userspace can choose
+ to ignore the request, or to gather VM memory core dump and/or
+ reset/shutdown of the VM.
/* Fix the size of the union. */
char padding[256];
diff --git a/Documentation/vm/userfaultfd.txt b/Documentation/vm/userfaultfd.txt
new file mode 100644
index 000000000000..70a3c94d1941
--- /dev/null
+++ b/Documentation/vm/userfaultfd.txt
@@ -0,0 +1,144 @@
+= Userfaultfd =
+
+== Objective ==
+
+Userfaults allow the implementation of on-demand paging from userland
+and more generally they allow userland to take control of various
+memory page faults, something otherwise only the kernel code could do.
+
+For example userfaults allows a proper and more optimal implementation
+of the PROT_NONE+SIGSEGV trick.
+
+== Design ==
+
+Userfaults are delivered and resolved through the userfaultfd syscall.
+
+The userfaultfd (aside from registering and unregistering virtual
+memory ranges) provides two primary functionalities:
+
+1) read/POLLIN protocol to notify a userland thread of the faults
+ happening
+
+2) various UFFDIO_* ioctls that can manage the virtual memory regions
+ registered in the userfaultfd that allows userland to efficiently
+ resolve the userfaults it receives via 1) or to manage the virtual
+ memory in the background
+
+The real advantage of userfaults if compared to regular virtual memory
+management of mremap/mprotect is that the userfaults in all their
+operations never involve heavyweight structures like vmas (in fact the
+userfaultfd runtime load never takes the mmap_sem for writing).
+
+Vmas are not suitable for page- (or hugepage) granular fault tracking
+when dealing with virtual address spaces that could span
+Terabytes. Too many vmas would be needed for that.
+
+The userfaultfd once opened by invoking the syscall, can also be
+passed using unix domain sockets to a manager process, so the same
+manager process could handle the userfaults of a multitude of
+different processes without them being aware about what is going on
+(well of course unless they later try to use the userfaultfd
+themselves on the same region the manager is already tracking, which
+is a corner case that would currently return -EBUSY).
+
+== API ==
+
+When first opened the userfaultfd must be enabled invoking the
+UFFDIO_API ioctl specifying a uffdio_api.api value set to UFFD_API (or
+a later API version) which will specify the read/POLLIN protocol
+userland intends to speak on the UFFD and the uffdio_api.features
+userland requires. The UFFDIO_API ioctl if successful (i.e. if the
+requested uffdio_api.api is spoken also by the running kernel and the
+requested features are going to be enabled) will return into
+uffdio_api.features and uffdio_api.ioctls two 64bit bitmasks of
+respectively all the available features of the read(2) protocol and
+the generic ioctl available.
+
+Once the userfaultfd has been enabled the UFFDIO_REGISTER ioctl should
+be invoked (if present in the returned uffdio_api.ioctls bitmask) to
+register a memory range in the userfaultfd by setting the
+uffdio_register structure accordingly. The uffdio_register.mode
+bitmask will specify to the kernel which kind of faults to track for
+the range (UFFDIO_REGISTER_MODE_MISSING would track missing
+pages). The UFFDIO_REGISTER ioctl will return the
+uffdio_register.ioctls bitmask of ioctls that are suitable to resolve
+userfaults on the range registered. Not all ioctls will necessarily be
+supported for all memory types depending on the underlying virtual
+memory backend (anonymous memory vs tmpfs vs real filebacked
+mappings).
+
+Userland can use the uffdio_register.ioctls to manage the virtual
+address space in the background (to add or potentially also remove
+memory from the userfaultfd registered range). This means a userfault
+could be triggering just before userland maps in the background the
+user-faulted page.
+
+The primary ioctl to resolve userfaults is UFFDIO_COPY. That
+atomically copies a page into the userfault registered range and wakes
+up the blocked userfaults (unless uffdio_copy.mode &
+UFFDIO_COPY_MODE_DONTWAKE is set). Other ioctl works similarly to
+UFFDIO_COPY. They're atomic as in guaranteeing that nothing can see an
+half copied page since it'll keep userfaulting until the copy has
+finished.
+
+== QEMU/KVM ==
+
+QEMU/KVM is using the userfaultfd syscall to implement postcopy live
+migration. Postcopy live migration is one form of memory
+externalization consisting of a virtual machine running with part or
+all of its memory residing on a different node in the cloud. The
+userfaultfd abstraction is generic enough that not a single line of
+KVM kernel code had to be modified in order to add postcopy live
+migration to QEMU.
+
+Guest async page faults, FOLL_NOWAIT and all other GUP features work
+just fine in combination with userfaults. Userfaults trigger async
+page faults in the guest scheduler so those guest processes that
+aren't waiting for userfaults (i.e. network bound) can keep running in
+the guest vcpus.
+
+It is generally beneficial to run one pass of precopy live migration
+just before starting postcopy live migration, in order to avoid
+generating userfaults for readonly guest regions.
+
+The implementation of postcopy live migration currently uses one
+single bidirectional socket but in the future two different sockets
+will be used (to reduce the latency of the userfaults to the minimum
+possible without having to decrease /proc/sys/net/ipv4/tcp_wmem).
+
+The QEMU in the source node writes all pages that it knows are missing
+in the destination node, into the socket, and the migration thread of
+the QEMU running in the destination node runs UFFDIO_COPY|ZEROPAGE
+ioctls on the userfaultfd in order to map the received pages into the
+guest (UFFDIO_ZEROCOPY is used if the source page was a zero page).
+
+A different postcopy thread in the destination node listens with
+poll() to the userfaultfd in parallel. When a POLLIN event is
+generated after a userfault triggers, the postcopy thread read() from
+the userfaultfd and receives the fault address (or -EAGAIN in case the
+userfault was already resolved and waken by a UFFDIO_COPY|ZEROPAGE run
+by the parallel QEMU migration thread).
+
+After the QEMU postcopy thread (running in the destination node) gets
+the userfault address it writes the information about the missing page
+into the socket. The QEMU source node receives the information and
+roughly "seeks" to that page address and continues sending all
+remaining missing pages from that new page offset. Soon after that
+(just the time to flush the tcp_wmem queue through the network) the
+migration thread in the QEMU running in the destination node will
+receive the page that triggered the userfault and it'll map it as
+usual with the UFFDIO_COPY|ZEROPAGE (without actually knowing if it
+was spontaneously sent by the source or if it was an urgent page
+requested through an userfault).
+
+By the time the userfaults start, the QEMU in the destination node
+doesn't need to keep any per-page state bitmap relative to the live
+migration around and a single per-page bitmap has to be maintained in
+the QEMU running in the source node to know which pages are still
+missing in the destination node. The bitmap in the source node is
+checked to find which missing pages to send in round robin and we seek
+over it when receiving incoming userfaults. After sending each page of
+course the bitmap is updated accordingly. It's also useful to avoid
+sending the same page twice (in case the userfault is read by the
+postcopy thread just before UFFDIO_COPY|ZEROPAGE runs in the migration
+thread).
diff --git a/Documentation/x86/kernel-stacks b/Documentation/x86/kernel-stacks
index 0f3a6c201943..9a0aa4d3a866 100644
--- a/Documentation/x86/kernel-stacks
+++ b/Documentation/x86/kernel-stacks
@@ -16,7 +16,7 @@ associated with each CPU. These stacks are only used while the kernel
is in control on that CPU; when a CPU returns to user space the
specialized stacks contain no useful data. The main CPU stacks are:
-* Interrupt stack. IRQSTACKSIZE
+* Interrupt stack. IRQ_STACK_SIZE
Used for external hardware interrupts. If this is the first external
hardware interrupt (i.e. not a nested hardware interrupt) then the
diff --git a/Documentation/x86/mtrr.txt b/Documentation/x86/mtrr.txt
index 860bc3adc223..dc3e703913ac 100644
--- a/Documentation/x86/mtrr.txt
+++ b/Documentation/x86/mtrr.txt
@@ -6,10 +6,22 @@ Luis R. Rodriguez <mcgrof@do-not-panic.com> - April 9, 2015
===============================================================================
Phasing out MTRR use
-MTRR use is replaced on modern x86 hardware with PAT. Over time the only type
-of effective MTRR that is expected to be supported will be for write-combining.
-As MTRR use is phased out device drivers should use arch_phys_wc_add() to make
-MTRR effective on non-PAT systems while a no-op on PAT enabled systems.
+MTRR use is replaced on modern x86 hardware with PAT. Direct MTRR use by
+drivers on Linux is now completely phased out, device drivers should use
+arch_phys_wc_add() in combination with ioremap_wc() to make MTRR effective on
+non-PAT systems while a no-op but equally effective on PAT enabled systems.
+
+Even if Linux does not use MTRRs directly, some x86 platform firmware may still
+set up MTRRs early before booting the OS. They do this as some platform
+firmware may still have implemented access to MTRRs which would be controlled
+and handled by the platform firmware directly. An example of platform use of
+MTRRs is through the use of SMI handlers, one case could be for fan control,
+the platform code would need uncachable access to some of its fan control
+registers. Such platform access does not need any Operating System MTRR code in
+place other than mtrr_type_lookup() to ensure any OS specific mapping requests
+are aligned with platform MTRR setup. If MTRRs are only set up by the platform
+firmware code though and the OS does not make any specific MTRR mapping
+requests mtrr_type_lookup() should always return MTRR_TYPE_INVALID.
For details refer to Documentation/x86/pat.txt.
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index 82fbdbc1e0b0..95a4d34af3fd 100644
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -17,7 +17,8 @@ Offset Proto Name Meaning
(struct ist_info)
080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!!
090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
-0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
+0A0/010 ALL sys_desc_table System description table (struct sys_desc_table),
+ OBSOLETE!!
0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends
0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits
0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits