diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt | 32 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/display/repaper.txt | 52 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt | 7 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 105 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
| -rw-r--r-- | Documentation/gpu/drm-internals.rst | 2 | ||||
| -rw-r--r-- | Documentation/gpu/drm-kms.rst | 59 | ||||
| -rw-r--r-- | Documentation/gpu/drm-mm.rst | 4 | ||||
| -rw-r--r-- | Documentation/gpu/drm-uapi.rst | 2 | ||||
| -rw-r--r-- | Documentation/gpu/todo.rst | 4 |
11 files changed, 207 insertions, 65 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt new file mode 100644 index 000000000000..b13adf30b8d3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt @@ -0,0 +1,32 @@ +Synopsys DesignWare MIPI DSI host controller +============================================ + +This document defines device tree properties for the Synopsys DesignWare MIPI +DSI host controller. It doesn't constitue a device tree binding specification +by itself but is meant to be referenced by platform-specific device tree +bindings. + +When referenced from platform device tree bindings the properties defined in +this document are defined as follows. The platform device tree bindings are +responsible for defining whether each optional property is used or not. + +- reg: Memory mapped base address and length of the DesignWare MIPI DSI + host controller registers. (mandatory) + +- clocks: References to all the clocks specified in the clock-names property + as specified in [1]. (mandatory) + +- clock-names: + - "pclk" is the peripheral clock for either AHB and APB. (mandatory) + - "px_clk" is the pixel clock for the DPI/RGB input. (optional) + +- resets: References to all the resets specified in the reset-names property + as specified in [2]. (optional) + +- reset-names: string reset name, must be "apb" if used. (optional) + +- panel or bridge node: see [3]. (mandatory) + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/reset/reset.txt +[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt diff --git a/Documentation/devicetree/bindings/display/repaper.txt b/Documentation/devicetree/bindings/display/repaper.txt new file mode 100644 index 000000000000..f5f9f9cf6a25 --- /dev/null +++ b/Documentation/devicetree/bindings/display/repaper.txt @@ -0,0 +1,52 @@ +Pervasive Displays RePaper branded e-ink displays + +Required properties: +- compatible: "pervasive,e1144cs021" for 1.44" display + "pervasive,e1190cs021" for 1.9" display + "pervasive,e2200cs021" for 2.0" display + "pervasive,e2271cs021" for 2.7" display + +- panel-on-gpios: Timing controller power control +- discharge-gpios: Discharge control +- reset-gpios: RESET pin +- busy-gpios: BUSY pin + +Required property for e2271cs021: +- border-gpios: Border control + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional property: +- pervasive,thermal-zone: name of thermometer's thermal zone + +Example: + + display_temp: lm75@48 { + compatible = "lm75b"; + reg = <0x48>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + display { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&display_temp>; + }; + }; + + papirus27@0{ + compatible = "pervasive,e2271cs021"; + reg = <0>; + + spi-max-frequency = <8000000>; + + panel-on-gpios = <&gpio 23 0>; + border-gpios = <&gpio 14 0>; + discharge-gpios = <&gpio 15 0>; + reset-gpios = <&gpio 24 0>; + busy-gpios = <&gpio 25 0>; + + pervasive,thermal-zone = "display"; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index 046076c6b277..fad8b7619647 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -11,7 +11,9 @@ following device-specific properties. Required properties: -- compatible: Shall contain "rockchip,rk3288-dw-hdmi". +- compatible: should be one of the following: + "rockchip,rk3288-dw-hdmi" + "rockchip,rk3399-dw-hdmi" - reg: See dw_hdmi.txt. - reg-io-width: See dw_hdmi.txt. Shall be 4. - interrupts: HDMI interrupt number @@ -30,7 +32,8 @@ Optional properties I2C master controller. - clock-names: See dw_hdmi.txt. The "cec" clock is optional. - clock-names: May contain "cec" as defined in dw_hdmi.txt. - +- clock-names: May contain "grf", power for grf io. +- clock-names: May contain "vpll", external clock for some hdmi phy. Example: diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt index 9eb3f0a2a078..5d835d9c1ba8 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt @@ -8,8 +8,12 @@ Required properties: - compatible: value should be one of the following "rockchip,rk3036-vop"; "rockchip,rk3288-vop"; + "rockchip,rk3368-vop"; + "rockchip,rk3366-vop"; "rockchip,rk3399-vop-big"; "rockchip,rk3399-vop-lit"; + "rockchip,rk3228-vop"; + "rockchip,rk3328-vop"; - interrupts: should contain a list of all VOP IP block interrupts in the order: VSYNC, LCD_SYSTEM. The interrupt specifier diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt index 8e1476941c0f..74b5ac7b26d6 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -1,7 +1,6 @@ * STMicroelectronics STM32 lcd-tft display controller - ltdc: lcd-tft display controller host - must be a sub-node of st-display-subsystem Required properties: - compatible: "st,stm32-ltdc" - reg: Physical base address of the IP registers and length of memory mapped region. @@ -13,8 +12,40 @@ Required nodes: - Video port for RGB output. -Example: +* STMicroelectronics STM32 DSI controller specific extensions to Synopsys + DesignWare MIPI DSI host controller +The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI +DSI host controller. For all mandatory properties & nodes, please refer +to the related documentation in [5]. + +Mandatory properties specific to STM32 DSI: +- #address-cells: Should be <1>. +- #size-cells: Should be <0>. +- compatible: "st,stm32-dsi". +- clock-names: + - phy pll reference clock string name, must be "ref". +- resets: see [5]. +- reset-names: see [5]. + +Mandatory nodes specific to STM32 DSI: +- ports: A node containing DSI input & output port nodes with endpoint + definitions as documented in [3] & [4]. + - port@0: DSI input port node, connected to the ltdc rgb output port. + - port@1: DSI output port node, connected to a panel or a bridge input port. +- panel or bridge node: A node containing the panel or bridge description as + documented in [6]. + - port: panel or bridge port node, connected to the DSI output port (port@1). + +Note: You can find more documentation in the following references +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/reset/reset.txt +[3] Documentation/devicetree/bindings/media/video-interfaces.txt +[4] Documentation/devicetree/bindings/graph.txt +[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt +[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt + +Example 1: RGB panel / { ... soc { @@ -34,3 +65,73 @@ Example: }; }; }; + +Example 2: DSI panel + +/ { + ... + soc { + ... + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + + port { + ltdc_out_dsi: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + + + dsi: dsi@40016c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-dsi"; + reg = <0x40016c00 0x800>; + clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; + clock-names = "ref", "pclk"; + resets = <&rcc STM32F4_APB2_RESET(DSI)>; + reset-names = "apb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&dsi_in_panel>; + }; + }; + + }; + + panel-dsi@0 { + reg = <0>; /* dsi virtual channel (0..3) */ + compatible = ...; + enable-gpios = ...; + + port { + dsi_in_panel: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + }; + + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index daf465bef758..36b27b1efec6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -249,6 +249,7 @@ oxsemi Oxford Semiconductor, Ltd. panasonic Panasonic Corporation parade Parade Technologies Inc. pericom Pericom Technology Inc. +pervasive Pervasive Displays, Inc. phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd pine64 Pine64 diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 0d936c67bf7d..5ee9674fb9e9 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -201,6 +201,8 @@ drivers. Open/Close, File Operations and IOCTLs ====================================== +.. _drm_driver_fops: + File Operations --------------- diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 2d77c9580164..307284125d7a 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -523,9 +523,6 @@ Color Management Properties .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :doc: overview -.. kernel-doc:: include/drm/drm_color_mgmt.h - :internal: - .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :export: @@ -554,60 +551,8 @@ various modules/drivers. Vertical Blanking ================= -Vertical blanking plays a major role in graphics rendering. To achieve -tear-free display, users must synchronize page flips and/or rendering to -vertical blanking. The DRM API offers ioctls to perform page flips -synchronized to vertical blanking and wait for vertical blanking. - -The DRM core handles most of the vertical blanking management logic, -which involves filtering out spurious interrupts, keeping race-free -blanking counters, coping with counter wrap-around and resets and -keeping use counts. It relies on the driver to generate vertical -blanking interrupts and optionally provide a hardware vertical blanking -counter. Drivers must implement the following operations. - -- int (\*enable_vblank) (struct drm_device \*dev, int crtc); void - (\*disable_vblank) (struct drm_device \*dev, int crtc); - Enable or disable vertical blanking interrupts for the given CRTC. - -- u32 (\*get_vblank_counter) (struct drm_device \*dev, int crtc); - Retrieve the value of the vertical blanking counter for the given - CRTC. If the hardware maintains a vertical blanking counter its value - should be returned. Otherwise drivers can use the - :c:func:`drm_vblank_count()` helper function to handle this - operation. - -Drivers must initialize the vertical blanking handling core with a call -to :c:func:`drm_vblank_init()` in their load operation. - -Vertical blanking interrupts can be enabled by the DRM core or by -drivers themselves (for instance to handle page flipping operations). -The DRM core maintains a vertical blanking use count to ensure that the -interrupts are not disabled while a user still needs them. To increment -the use count, drivers call :c:func:`drm_vblank_get()`. Upon -return vertical blanking interrupts are guaranteed to be enabled. - -To decrement the use count drivers call -:c:func:`drm_vblank_put()`. Only when the use count drops to zero -will the DRM core disable the vertical blanking interrupts after a delay -by scheduling a timer. The delay is accessible through the -vblankoffdelay module parameter or the ``drm_vblank_offdelay`` global -variable and expressed in milliseconds. Its default value is 5000 ms. -Zero means never disable, and a negative value means disable -immediately. Drivers may override the behaviour by setting the -:c:type:`struct drm_device <drm_device>` -vblank_disable_immediate flag, which when set causes vblank interrupts -to be disabled immediately regardless of the drm_vblank_offdelay -value. The flag should only be set if there's a properly working -hardware vblank counter present. - -When a vertical blanking interrupt occurs drivers only need to call the -:c:func:`drm_handle_vblank()` function to account for the -interrupt. - -Resources allocated by :c:func:`drm_vblank_init()` must be freed -with a call to :c:func:`drm_vblank_cleanup()` in the driver unload -operation handler. +.. kernel-doc:: drivers/gpu/drm/drm_vblank.c + :doc: vblank handling Vertical Blanking and Interrupt Handling Functions Reference ------------------------------------------------------------ diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index 9412798645c1..b08e9dcd9177 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -191,7 +191,7 @@ acquired and release by :c:func:`calling drm_gem_object_get()` and holding the lock. When the last reference to a GEM object is released the GEM core calls -the :c:type:`struct drm_driver <drm_driver>` gem_free_object +the :c:type:`struct drm_driver <drm_driver>` gem_free_object_unlocked operation. That operation is mandatory for GEM-enabled drivers and must free the GEM object and all associated resources. @@ -492,7 +492,7 @@ DRM Sync Objects :doc: Overview .. kernel-doc:: include/drm/drm_syncobj.h - :export: + :internal: .. kernel-doc:: drivers/gpu/drm/drm_syncobj.c :export: diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index 858457567d3d..679373b4a03f 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -160,6 +160,8 @@ other hand, a driver requires shared state between clients which is visible to user-space and accessible beyond open-file boundaries, they cannot support render nodes. +.. _drm_driver_ioctl: + IOCTL Support on Device Nodes ============================= diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 1ae42006deea..22af55d06ab8 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -108,8 +108,8 @@ This would be especially useful for tinydrm: crtc state, clear that to the max values, x/y = 0 and w/h = MAX_INT, in __drm_atomic_helper_crtc_duplicate_state(). -- Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm_ - prefix ofc and using drm_fb_. drm_framebuffer.c makes sense since this +- Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm\_ + prefix ofc and using drm_fb\_. drm_framebuffer.c makes sense since this is a function useful to implement the fb->dirty function. - Create a new drm_fb_dirty function which does essentially what e.g. |