summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DocBook/gpu.tmpl47
-rw-r--r--Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt36
-rw-r--r--Documentation/devicetree/bindings/display/bridge/analogix_dp.txt52
-rw-r--r--Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt5
-rw-r--r--Documentation/devicetree/bindings/display/exynos/exynos_dp.txt93
-rw-r--r--Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt27
-rw-r--r--Documentation/devicetree/bindings/display/fsl,dcu.txt15
-rw-r--r--Documentation/devicetree/bindings/display/fsl,tcon.txt18
-rw-r--r--Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt72
-rw-r--r--Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt64
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt203
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt35
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt60
-rw-r--r--Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt8
-rw-r--r--Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt8
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt92
-rw-r--r--Documentation/devicetree/bindings/display/snps,arcpgu.txt35
-rw-r--r--Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt258
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt3
-rw-r--r--Documentation/devicetree/bindings/video/bridge/anx7814.txt40
23 files changed, 1100 insertions, 92 deletions
diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
index 1692c4dd5487..4a0c599b6a6d 100644
--- a/Documentation/DocBook/gpu.tmpl
+++ b/Documentation/DocBook/gpu.tmpl
@@ -1617,6 +1617,11 @@ void intel_crt_init(struct drm_device *dev)
!Iinclude/drm/drm_fb_helper.h
</sect2>
<sect2>
+ <title>Framebuffer CMA Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_fb_cma_helper.c framebuffer cma helper functions
+!Edrivers/gpu/drm/drm_fb_cma_helper.c
+ </sect2>
+ <sect2>
<title>Display Port Helper Functions Reference</title>
!Pdrivers/gpu/drm/drm_dp_helper.c dp helpers
!Iinclude/drm/drm_dp_helper.h
@@ -1671,17 +1676,23 @@ void intel_crt_init(struct drm_device *dev)
!Pdrivers/gpu/drm/drm_crtc.c Tile group
</sect2>
<sect2>
- <title>Bridges</title>
+ <title>Bridges</title>
<sect3>
- <title>Overview</title>
+ <title>Overview</title>
!Pdrivers/gpu/drm/drm_bridge.c overview
</sect3>
<sect3>
- <title>Default bridge callback sequence</title>
+ <title>Default bridge callback sequence</title>
!Pdrivers/gpu/drm/drm_bridge.c bridge callbacks
</sect3>
!Edrivers/gpu/drm/drm_bridge.c
</sect2>
+ <sect2>
+ <title>Panel Helper Reference</title>
+!Iinclude/drm/drm_panel.h
+!Edrivers/gpu/drm/drm_panel.c
+!Pdrivers/gpu/drm/drm_panel.c drm panel
+ </sect2>
</sect1>
<!-- Internals: kms properties -->
@@ -1817,7 +1828,7 @@ void intel_crt_init(struct drm_device *dev)
</tr>
<tr>
<td rowspan="42" valign="top" >DRM</td>
- <td valign="top" >Generic</td>
+ <td rowspan="2" valign="top" >Generic</td>
<td valign="top" >“rotation”</td>
<td valign="top" >BITMASK</td>
<td valign="top" >{ 0, "rotate-0" },
@@ -1832,6 +1843,13 @@ void intel_crt_init(struct drm_device *dev)
image along the specified axis prior to rotation</td>
</tr>
<tr>
+ <td valign="top" >“scaling mode”</td>
+ <td valign="top" >ENUM</td>
+ <td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td>
+ <td valign="top" >Connector</td>
+ <td valign="top" >Supported by: amdgpu, gma500, i915, nouveau and radeon.</td>
+ </tr>
+ <tr>
<td rowspan="5" valign="top" >Connector</td>
<td valign="top" >“EDID”</td>
<td valign="top" >BLOB | IMMUTABLE</td>
@@ -2068,21 +2086,12 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >property to suggest an Y offset for a connector</td>
</tr>
<tr>
- <td rowspan="8" valign="top" >Optional</td>
- <td valign="top" >“scaling mode”</td>
- <td valign="top" >ENUM</td>
- <td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td>
- <td valign="top" >Connector</td>
- <td valign="top" >TBD</td>
- </tr>
- <tr>
+ <td rowspan="7" valign="top" >Optional</td>
<td valign="top" >"aspect ratio"</td>
<td valign="top" >ENUM</td>
<td valign="top" >{ "None", "4:3", "16:9" }</td>
<td valign="top" >Connector</td>
- <td valign="top" >DRM property to set aspect ratio from user space app.
- This enum is made generic to allow addition of custom aspect
- ratios.</td>
+ <td valign="top" >TDB</td>
</tr>
<tr>
<td valign="top" >“dirty”</td>
@@ -2153,7 +2162,11 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >ENUM</td>
<td valign="top" >{ "Automatic", "Full", "Limited 16:235" }</td>
<td valign="top" >Connector</td>
- <td valign="top" >TBD</td>
+ <td valign="top" >When this property is set to Limited 16:235
+ and CTM is set, the hardware will be programmed with the
+ result of the multiplication of CTM by the limited range
+ matrix to ensure the pixels normaly in the range 0..1.0 are
+ remapped to the range 16/255..235/255.</td>
</tr>
<tr>
<td valign="top" >“audio”</td>
@@ -3334,7 +3347,7 @@ int num_ioctls;</synopsis>
<title>Video BIOS Table (VBT)</title>
!Pdrivers/gpu/drm/i915/intel_bios.c Video BIOS Table (VBT)
!Idrivers/gpu/drm/i915/intel_bios.c
-!Idrivers/gpu/drm/i915/intel_bios.h
+!Idrivers/gpu/drm/i915/intel_vbt_defs.h
</sect2>
</sect1>
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index 9f97df4d5152..a5ea451e67fc 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -35,12 +35,22 @@ Optional properties for HDMI:
as an interrupt/status bit in the HDMI controller
itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt
+Required properties for DPI:
+- compatible: Should be "brcm,bcm2835-dpi"
+- reg: Physical base address and length of the registers
+- clocks: a) core: The core clock the unit runs on
+ b) pixel: The pixel clock that feeds the pixelvalve
+- port: Port node with a single endpoint connecting to the panel
+ device, as defined in [1]
+
Required properties for V3D:
- compatible: Should be "brcm,bcm2835-v3d"
- reg: Physical base address and length of the V3D's registers
- interrupts: The interrupt number
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+
Example:
pixelvalve@7e807000 {
compatible = "brcm,bcm2835-pixelvalve2";
@@ -66,6 +76,22 @@ hdmi: hdmi@7e902000 {
clock-names = "pixel", "hdmi";
};
+dpi: dpi@7e208000 {
+ compatible = "brcm,bcm2835-dpi";
+ reg = <0x7e208000 0x8c>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>,
+ <&clocks BCM2835_CLOCK_DPI>;
+ clock-names = "core", "pixel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port {
+ dpi_out: endpoint@0 {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
@@ -75,3 +101,13 @@ v3d: v3d@7ec00000 {
vc4: gpu {
compatible = "brcm,bcm2835-vc4";
};
+
+panel: panel {
+ compatible = "ontat,yx700wv03", "simple-panel";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 000000000000..4f2ba8c13d92
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,52 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+ -compatible:
+ platform specific such as:
+ * "samsung,exynos5-dp"
+ * "rockchip,rk3288-dp"
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -interrupt-parent:
+ phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
+ -hpd-gpios:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+ -port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+ * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+-------------------------------------------------------------------------------
+
+Example:
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b0000 0x10000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ clocks = <&clock 342>;
+ clock-names = "dp";
+
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
index 377afbf5122a..c9fd7b3807e7 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
@@ -5,7 +5,8 @@ Exynos series of SoCs which transfers the image data from a video memory
buffer to an external LCD interface.
Required properties:
-- compatible: value should be "samsung,exynos5433-decon";
+- compatible: value should be one of:
+ "samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
- reg: physical base address and length of the DECON registers set.
- interrupts: should contain a list of all DECON IP block interrupts in the
order: VSYNC, LCD_SYSTEM. The interrupt specifier format
@@ -16,7 +17,7 @@ Required properties:
- clocks: must include clock specifiers corresponding to entries in the
clock-names property.
- clock-names: list of clock names sorted in the same order as the clocks
- property. Must contain "aclk_decon", "aclk_smmu_decon0x",
+ property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
"sclk_decon_eclk"
- ports: contains a port which is connected to mic node. address-cells and
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index fe4a7a2dea9c..ade5d8eebf85 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -1,20 +1,3 @@
-Device-Tree bindings for Samsung Exynos Embedded DisplayPort Transmitter(eDP)
-
-DisplayPort is industry standard to accommodate the growing board adoption
-of digital display technology within the PC and CE industries.
-It consolidates the internal and external connection methods to reduce device
-complexity and cost. It also supports necessary features for important cross
-industry applications and provides performance scalability to enable the next
-generation of displays that feature higher color depths, refresh rates, and
-display resolutions.
-
-eDP (embedded display port) device is compliant with Embedded DisplayPort
-standard as follows,
-- DisplayPort standard 1.1a for Exynos5250 and Exynos5260.
-- DisplayPort standard 1.3 for Exynos5422s and Exynos5800.
-
-eDP resides between FIMD and panel or FIMD and bridge such as LVDS.
-
The Exynos display port interface should be configured based on
the type of panel connected to it.
@@ -48,26 +31,6 @@ Required properties for dp-controller:
from general PHY binding: the phandle for the PHY device.
-phy-names:
from general PHY binding: Should be "dp".
- -samsung,color-space:
- input video data format.
- COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
- -samsung,dynamic-range:
- dynamic range for input video data.
- VESA = 0, CEA = 1
- -samsung,ycbcr-coeff:
- YCbCr co-efficients for input video.
- COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
- -samsung,color-depth:
- number of bits per colour component.
- COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
- -samsung,link-rate:
- link rate supported by the panel.
- LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
- -samsung,lane-count:
- number of lanes supported by the panel.
- LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
- - display-timings: timings for the connected panel as described by
- Documentation/devicetree/bindings/display/display-timing.txt
Optional properties for dp-controller:
-interlaced:
@@ -83,17 +46,31 @@ Optional properties for dp-controller:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug
detection
-Video interfaces:
- Device node can contain video interface port nodes according to [1].
- The following are properties specific to those nodes:
-
- endpoint node connected to bridge or panel node:
- - remote-endpoint: specifies the endpoint in panel or bridge node.
- This node is required in all kinds of exynos dp
- to represent the connection between dp and bridge
- or dp and panel.
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+ -video interfaces: Device node can contain video interface port
+ nodes according to [1].
+ - display-timings: timings for the connected panel as described by
+ Documentation/devicetree/bindings/display/panel/display-timing.txt
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+ -phys (required)
+ -phy-names (required)
+ -hpd-gpios (optional)
+ force-hpd (optional)
+
+Deprecated properties for DisplayPort:
+-interlaced: deprecated prop that can parsed from drm_display_mode.
+-vsync-active-high: deprecated prop that can parsed from drm_display_mode.
+-hsync-active-high: deprecated prop that can parsed from drm_display_mode.
+-samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode.
+-samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
+-samsung,color-space: deprecated prop that can parsed from drm_display_info.
+-samsung,color-depth: deprecated prop that can parsed from drm_display_info.
+-samsung,link-rate: deprecated prop that can reading from monitor by dpcd method.
+-samsung,lane-count: deprecated prop that can reading from monitor by dpcd method.
+-samsung,hpd-gpio: deprecated name for hpd-gpios.
+
+-------------------------------------------------------------------------------
Example:
@@ -112,13 +89,6 @@ SOC specific portion:
Board Specific portion:
dp-controller {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
display-timings {
native-mode = <&lcd_timing>;
lcd_timing: 1366x768 {
@@ -135,18 +105,9 @@ Board Specific portion:
};
ports {
- port {
+ port@0 {
dp_out: endpoint {
- remote-endpoint = <&dp_in>;
- };
- };
- };
-
- panel {
- ...
- port {
- dp_in: endpoint {
- remote-endpoint = <&dp_out>;
+ remote-endpoint = <&bridge_in>;
};
};
};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
index d474f59be6d6..a2ec4c1c9382 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
@@ -5,6 +5,7 @@ Required properties:
1) "samsung,exynos4210-hdmi"
2) "samsung,exynos4212-hdmi"
3) "samsung,exynos5420-hdmi"
+ 4) "samsung,exynos5433-hdmi"
- reg: physical base address of the hdmi and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
@@ -12,6 +13,11 @@ Required properties:
a) phandle of the gpio controller node.
b) pin number within the gpio controller.
c) optional flags and pull up/down.
+- ddc: phandle to the hdmi ddc node
+- phy: phandle to the hdmi phy node
+- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Required properties for Exynos 4210, 4212, 5420 and 5433:
- clocks: list of clock IDs from SoC clock driver.
a) hdmi: Gate of HDMI IP bus clock.
b) sclk_hdmi: Gate of HDMI special clock.
@@ -25,9 +31,24 @@ Required properties:
sclk_pixel.
- clock-names: aliases as per driver requirements for above clock IDs:
"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Required properties for Exynos 5433:
+- clocks: list of clock specifiers according to common clock bindings.
+ a) hdmi_pclk: Gate of HDMI IP APB bus.
+ b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
+ d) i_tmds_clk: Gate of HDMI TMDS clock.
+ e) i_pixel_clk: Gate of HDMI pixel clock.
+ f) i_spdif_clk: Gate of HDMI SPDIF clock.
+ g) oscclk: Oscillator clock, used as parent of following *_user clocks
+ in case HDMI-PHY is not operational.
+ h) tmds_clko: TMDS clock generated by HDMI-PHY.
+ i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
+ respectively if HDMI-PHY is off and operational.
+ j) pixel_clko: Pixel clock generated by HDMI-PHY.
+ k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
+ respectively if HDMI-PHY is off and operational.
+- clock-names: aliases for above clock specfiers.
+- samsung,sysreg: handle to syscon used to control the system registers.
Example:
diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt
index ebf1be9ae393..ae55cde1b69e 100644
--- a/Documentation/devicetree/bindings/display/fsl,dcu.txt
+++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt
@@ -6,17 +6,24 @@ Required properties:
* "fsl,vf610-dcu".
- reg: Address and length of the register set for dcu.
-- clocks: From common clock binding: handle to dcu clock.
-- clock-names: From common clock binding: Shall be "dcu".
+- clocks: Handle to "dcu" and "pix" clock (in the order below)
+ This can be the same clock (e.g. LS1021a)
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Should be "dcu" and "pix"
+ See ../clocks/clock-bindings.txt for details.
- big-endian Boolean property, LS1021A DCU registers are big-endian.
- fsl,panel: The phandle to panel node.
+Optional properties:
+- fsl,tcon: The phandle to the timing controller node.
+
Examples:
dcu: dcu@2ce0000 {
compatible = "fsl,ls1021a-dcu";
reg = <0x0 0x2ce0000 0x0 0x10000>;
- clocks = <&platform_clk 0>;
- clock-names = "dcu";
+ clocks = <&platform_clk 0>, <&platform_clk 0>;
+ clock-names = "dcu", "pix";
big-endian;
fsl,panel = <&panel>;
+ fsl,tcon = <&tcon>;
};
diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt
new file mode 100644
index 000000000000..6fa4ab668db5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt
@@ -0,0 +1,18 @@
+Device Tree bindings for Freescale TCON Driver
+
+Required properties:
+- compatible: Should be one of
+ * "fsl,vf610-tcon".
+
+- reg: Address and length of the register set for tcon.
+- clocks: From common clock binding: handle to tcon ipg clock.
+- clock-names: From common clock binding: Shall be "ipg".
+
+Examples:
+timing-controller@4003d000 {
+ compatible = "fsl,vf610-tcon";
+ reg = <0x4003d000 0x1000>;
+ clocks = <&clks VF610_CLK_TCON0>;
+ clock-names = "ipg";
+ status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
new file mode 100644
index 000000000000..d270bfe4e4e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
@@ -0,0 +1,72 @@
+Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver
+
+A DSI Host Controller resides in the middle of display controller and external
+HDMI converter or panel.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-dsi".
+- reg: physical base address and length of dsi controller's registers.
+- clocks: contains APB clock phandle + clock-specifier pair.
+- clock-names: should be "pclk".
+- ports: contains DSI controller input and output sub port.
+ The input port connects to ADE output port with the reg value "0".
+ The output port with the reg value "1", it could connect to panel or
+ any other bridge endpoints.
+ See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+A example of HiKey board hi6220 SoC and board specific DT entry:
+Example:
+
+SoC specific:
+ dsi: dsi@f4107800 {
+ compatible = "hisilicon,hi6220-dsi";
+ reg = <0x0 0xf4107800 0x0 0x100>;
+ clocks = <&media_ctrl HI6220_DSI_PCLK>;
+ clock-names = "pclk";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 0 for input port */
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ade_out>;
+ };
+ };
+ };
+ };
+
+
+Board specific:
+ &dsi {
+ status = "ok";
+
+ ports {
+ /* 1 for output port */
+ port@1 {
+ reg = <1>;
+
+ dsi_out0: endpoint@0 {
+ remote-endpoint = <&adv7533_in>;
+ };
+ };
+ };
+ };
+
+ &i2c2 {
+ ...
+
+ adv7533: adv7533@39 {
+ ...
+
+ port {
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi_out0>;
+ };
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
new file mode 100644
index 000000000000..38dc9d60eef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
@@ -0,0 +1,64 @@
+Device-Tree bindings for hisilicon ADE display controller driver
+
+ADE (Advanced Display Engine) is the display controller which grab image
+data from memory, do composition, do post image processing, generate RGB
+timing stream and transfer to DSI.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-ade".
+- reg: physical base address and length of the ADE controller's registers.
+- hisilicon,noc-syscon: ADE NOC QoS syscon.
+- resets: The ADE reset controller node.
+- interrupt: the ldi vblank interrupt number used.
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+- clock-names: should contain:
+ "clk_ade_core" for the ADE core clock.
+ "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with
+ jpeg codec.
+ "clk_ade_pix" for the ADE pixel clok.
+- assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks'
+ phandle + clock-specifier pairs.
+- assigned-clock-rates: clock rates, one for each entry in assigned-clocks.
+ The rate of "clk_ade_core" could be "360000000" or "180000000";
+ The rate of "clk_codec_jpeg" could be or less than "1440000000".
+ These rate values could be configured according to performance and power
+ consumption.
+- port: the output port. This contains one endpoint subnode, with its
+ remote-endpoint set to the phandle of the connected DSI input endpoint.
+ See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent.
+
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+ ade: ade@f4100000 {
+ compatible = "hisilicon,hi6220-ade";
+ reg = <0x0 0xf4100000 0x0 0x7800>;
+ reg-names = "ade_base";
+ hisilicon,noc-syscon = <&medianoc_ade>;
+ resets = <&media_ctrl MEDIA_ADE>;
+ interrupts = <0 115 4>; /* ldi interrupt */
+
+ clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>,
+ <&media_ctrl HI6220_ADE_PIX_SRC>;
+ /*clock name*/
+ clock-names = "clk_ade_core",
+ "clk_codec_jpeg",
+ "clk_ade_pix";
+
+ assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>;
+ assigned-clock-rates = <360000000>, <288000000>;
+ dma-coherent;
+
+ port {
+ ade_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
new file mode 100644
index 000000000000..db6e77edbea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -0,0 +1,203 @@
+Mediatek display subsystem
+==========================
+
+The Mediatek display subsystem consists of various DISP function blocks in the
+MMSYS register space. The connections between them can be configured by output
+and input selectors in the MMSYS_CONFIG register space. Pixel clock and start
+of frame signal are distributed to the other function blocks by a DISP_MUTEX
+function block.
+
+All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
+For a description of the MMSYS_CONFIG binding, see
+Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt.
+
+DISP function blocks
+====================
+
+A display stream starts at a source function block that reads pixel data from
+memory and ends with a sink function block that drives pixels on a display
+interface, or writes pixels back to memory. All DISP function blocks have
+their own register space, interrupt, and clock gate. The blocks that can
+access memory additionally have to list the IOMMU and local arbiter they are
+connected to.
+
+For a description of the display interface sink function blocks, see
+Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
+Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt.
+
+Required properties (all function blocks):
+- compatible: "mediatek,<chip>-disp-<function>", one of
+ "mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc)
+ "mediatek,<chip>-disp-rdma" - read DMA / line buffer
+ "mediatek,<chip>-disp-wdma" - write DMA
+ "mediatek,<chip>-disp-color" - color processor
+ "mediatek,<chip>-disp-aal" - adaptive ambient light controller
+ "mediatek,<chip>-disp-gamma" - gamma correction
+ "mediatek,<chip>-disp-merge" - merge streams from two RDMA sources
+ "mediatek,<chip>-disp-split" - split stream to two encoders
+ "mediatek,<chip>-disp-ufoe" - data compression engine
+ "mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt
+ "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
+ "mediatek,<chip>-disp-mutex" - display mutex
+ "mediatek,<chip>-disp-od" - overdrive
+- reg: Physical base address and length of the function block register space
+- interrupts: The interrupt signal from the function block (required, except for
+ merge and split function blocks).
+- clocks: device clocks
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+ For most function blocks this is just a single clock input. Only the DSI and
+ DPI controller nodes have multiple clock inputs. These are documented in
+ mediatek,dsi.txt and mediatek,dpi.txt, respectively.
+
+Required properties (DMA function blocks):
+- compatible: Should be one of
+ "mediatek,<chip>-disp-ovl"
+ "mediatek,<chip>-disp-rdma"
+ "mediatek,<chip>-disp-wdma"
+- larb: Should contain a phandle pointing to the local arbiter device as defined
+ in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+- iommus: Should point to the respective IOMMU block with master port as
+ argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+ for details.
+
+Examples:
+
+mmsys: clock-controller@14000000 {
+ compatible = "mediatek,mt8173-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ #clock-cells = <1>;
+};
+
+ovl0: ovl@1400c000 {
+ compatible = "mediatek,mt8173-disp-ovl";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ iommus = <&iommu M4U_PORT_DISP_OVL0>;
+ mediatek,larb = <&larb0>;
+};
+
+ovl1: ovl@1400d000 {
+ compatible = "mediatek,mt8173-disp-ovl";
+ reg = <0 0x1400d000 0 0x1000>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_OVL1>;
+ iommus = <&iommu M4U_PORT_DISP_OVL1>;
+ mediatek,larb = <&larb4>;
+};
+
+rdma0: rdma@1400e000 {
+ compatible = "mediatek,mt8173-disp-rdma";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+ mediatek,larb = <&larb0>;
+};
+
+rdma1: rdma@1400f000 {
+ compatible = "mediatek,mt8173-disp-rdma";
+ reg = <0 0x1400f000 0 0x1000>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb4>;
+};
+
+rdma2: rdma@14010000 {
+ compatible = "mediatek,mt8173-disp-rdma";
+ reg = <0 0x14010000 0 0x1000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA2>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA2>;
+ mediatek,larb = <&larb4>;
+};
+
+wdma0: wdma@14011000 {
+ compatible = "mediatek,mt8173-disp-wdma";
+ reg = <0 0x14011000 0 0x1000>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+ mediatek,larb = <&larb0>;
+};
+
+wdma1: wdma@14012000 {
+ compatible = "mediatek,mt8173-disp-wdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA1>;
+ iommus = <&iommu M4U_PORT_DISP_WDMA1>;
+ mediatek,larb = <&larb4>;
+};
+
+color0: color@14013000 {
+ compatible = "mediatek,mt8173-disp-color";
+ reg = <0 0x14013000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+};
+
+color1: color@14014000 {
+ compatible = "mediatek,mt8173-disp-color";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+};
+
+aal@14015000 {
+ compatible = "mediatek,mt8173-disp-aal";
+ reg = <0 0x14015000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_AAL>;
+};
+
+gamma@14016000 {
+ compatible = "mediatek,mt8173-disp-gamma";
+ reg = <0 0x14016000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+};
+
+ufoe@1401a000 {
+ compatible = "mediatek,mt8173-disp-ufoe";
+ reg = <0 0x1401a000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_UFOE>;
+};
+
+dsi0: dsi@1401b000 {
+ /* See mediatek,dsi.txt for details */
+};
+
+dpi0: dpi@1401d000 {
+ /* See mediatek,dpi.txt for details */
+};
+
+mutex: mutex@14020000 {
+ compatible = "mediatek,mt8173-disp-mutex";
+ reg = <0 0x14020000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+};
+
+od@14023000 {
+ compatible = "mediatek,mt8173-disp-od";
+ reg = <0 0x14023000 0 0x1000>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_OD>;
+};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
new file mode 100644
index 000000000000..b6a7e7397b8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -0,0 +1,35 @@
+Mediatek DPI Device
+===================
+
+The Mediatek DPI function block is a sink of the display subsystem and
+provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
+output bus.
+
+Required properties:
+- compatible: "mediatek,<chip>-dpi"
+- reg: Physical base address and length of the controller's registers
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "pixel", "engine", and "pll"
+- port: Output port node with endpoint definitions as described in
+ Documentation/devicetree/bindings/graph.txt. This port should be connected
+ to the input port of an attached HDMI or LVDS encoder chip.
+
+Example:
+
+dpi0: dpi@1401d000 {
+ compatible = "mediatek,mt8173-dpi";
+ reg = <0 0x1401d000 0 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+ <&mmsys CLK_MM_DPI_ENGINE>,
+ <&apmixedsys CLK_APMIXED_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+
+ port {
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
new file mode 100644
index 000000000000..2b1585a34b85
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -0,0 +1,60 @@
+Mediatek DSI Device
+===================
+
+The Mediatek DSI function block is a sink of the display subsystem and can
+drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+channel output.
+
+Required properties:
+- compatible: "mediatek,<chip>-dsi"
+- reg: Physical base address and length of the controller's registers
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "engine", "digital", and "hs"
+- phys: phandle link to the MIPI D-PHY controller.
+- phy-names: must contain "dphy"
+- port: Output port node with endpoint definitions as described in
+ Documentation/devicetree/bindings/graph.txt. This port should be connected
+ to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+MIPI TX Configuration Module
+============================
+
+The MIPI TX configuration module controls the MIPI D-PHY.
+
+Required properties:
+- compatible: "mediatek,<chip>-mipi-tx"
+- reg: Physical base address and length of the controller's registers
+- clocks: PLL reference clock
+- clock-output-names: name of the output clock line to the DSI encoder
+- #clock-cells: must be <0>;
+- #phy-cells: must be <0>.
+
+Example:
+
+mipi_tx0: mipi-dphy@10215000 {
+ compatible = "mediatek,mt8173-mipi-tx";
+ reg = <0 0x10215000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+};
+
+dsi0: dsi@1401b000 {
+ compatible = "mediatek,mt8173-dsi";
+ reg = <0 0x1401b000 0 0x1000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+
+ port {
+ dsi0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt
new file mode 100644
index 000000000000..3e10cd782491
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,at070tn92.txt
@@ -0,0 +1,7 @@
+Innolux AT070TN92 7.0" WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,at070tn92"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt
new file mode 100644
index 000000000000..74540a090669
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino-43-ts.txt
@@ -0,0 +1,7 @@
+Olimex 4.3" TFT LCD panel
+
+Required properties:
+- compatible: should be "olimex,lcd-olinuxino-43-ts"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
new file mode 100644
index 000000000000..3d8a5e029242
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ontat,yx700wv03.txt
@@ -0,0 +1,7 @@
+On Tat Industrial Company 7" DPI TFT panel.
+
+Required properties:
+- compatible: should be "ontat,yx700wv03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt
new file mode 100644
index 000000000000..a2613b9675df
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpk,f07a-0102.txt
@@ -0,0 +1,8 @@
+TPK U.S.A. LLC Fusion 7" integrated projected capacitive touch display with,
+800 x 480 (WVGA) LCD panel.
+
+Required properties:
+- compatible: should be "tpk,f07a-0102"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt
new file mode 100644
index 000000000000..b9d051196ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpk,f10a-0102.txt
@@ -0,0 +1,8 @@
+TPK U.S.A. LLC Fusion 10.1" integrated projected capacitive touch display with,
+1024 x 600 (WSVGA) LCD panel.
+
+Required properties:
+- compatible: should be "tpk,f10a-0102"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000000000000..e832ff98fd61
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,92 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <&edp_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Port 0: contained 2 endpoints, connecting to the output of vop.
+ Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+- force-hpd (optional)
+-------------------------------------------------------------------------------
+
+Example:
+ dp-controller: dp@ff970000 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff970000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <&grf>;
+ resets = <&cru 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
new file mode 100644
index 000000000000..c5c7dfd37df2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
@@ -0,0 +1,35 @@
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+ - compatible: "snps,arcpgu"
+ - reg: Physical base address and length of the controller's registers.
+ - clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+ - clock-names: A list of clock names. For ARC PGU it should contain:
+ - "pxlclk" for the clock feeding the output PLL of the controller.
+
+Required sub-nodes:
+ - port: The PGU connection to an encoder chip.
+
+Example:
+
+/ {
+ ...
+
+ pgu@XXXXXXXX {
+ compatible = "snps,arcpgu";
+ reg = <0xXXXXXXXX 0x400>;
+ clocks = <&clock_node>;
+ clock-names = "pxlclk";
+
+ port {
+ pgu_output: endpoint {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
new file mode 100644
index 000000000000..df8f4aeefe4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -0,0 +1,258 @@
+Allwinner A10 Display Pipeline
+==============================
+
+The Allwinner A10 Display pipeline is composed of several components
+that are going to be documented below:
+
+TV Encoder
+----------
+
+The TV Encoder supports the composite and VGA output. It is one end of
+the pipeline.
+
+Required properties:
+ - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
+ - reg: base address and size of memory-mapped region
+ - clocks: the clocks driving the TV encoder
+ - resets: phandle to the reset controller driving the encoder
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoint.
+
+TCON
+----
+
+The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
+
+Required properties:
+ - compatible: value should be "allwinner,sun5i-a13-tcon".
+ - reg: base address and size of memory-mapped region
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the TCON. Three are needed:
+ - 'ahb': the interface clocks
+ - 'tcon-ch0': The clock driving the TCON channel 0
+ - 'tcon-ch1': The clock driving the TCON channel 1
+ - resets: phandles to the reset controllers driving the encoder
+ - "lcd": the reset line for the TCON channel 0
+
+ - clock-names: the clock names mentioned above
+ - reset-names: the reset names mentioned above
+ - clock-output-names: Name of the pixel clock created
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoint, the second one the output
+
+ The output should have two endpoints. The first is the block
+ connected to the TCON channel 0 (usually a panel or a bridge), the
+ second the block connected to the TCON channel 1 (usually the TV
+ encoder)
+
+
+Display Engine Backend
+----------------------
+
+The display engine backend exposes layers and sprites to the
+system.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun5i-a13-display-backend
+ - reg: base address and size of the memory-mapped region.
+ - clocks: phandles to the clocks feeding the frontend and backend
+ * ahb: the backend interface clock
+ * mod: the backend module clock
+ * ram: the backend DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset controllers driving the backend
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoints, the second one the output
+
+Display Engine Frontend
+-----------------------
+
+The display engine frontend does formats conversion, scaling,
+deinterlacing and color space conversion.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun5i-a13-display-frontend
+ - reg: base address and size of the memory-mapped region.
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the frontend and backend
+ * ahb: the backend interface clock
+ * mod: the backend module clock
+ * ram: the backend DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset controllers driving the backend
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoints, the second one the outputs
+
+
+Display Engine Pipeline
+-----------------------
+
+The display engine pipeline (and its entry point, since it can be
+either directly the backend or the frontend) is represented as an
+extra node.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun5i-a13-display-engine
+
+ - allwinner,pipelines: list of phandle to the display engine
+ frontends available.
+
+Example:
+
+panel: panel {
+ compatible = "olimex,lcd-olinuxino-43-ts";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel_input: endpoint {
+ remote-endpoint = <&tcon0_out_panel>;
+ };
+ };
+};
+
+tve0: tv-encoder@01c0a000 {
+ compatible = "allwinner,sun4i-a10-tv-encoder";
+ reg = <0x01c0a000 0x1000>;
+ clocks = <&ahb_gates 34>;
+ resets = <&tcon_ch0_clk 0>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tve0_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_tve0>;
+ };
+ };
+};
+
+tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun5i-a13-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <44>;
+ resets = <&tcon_ch0_clk 1>;
+ reset-names = "lcd";
+ clocks = <&ahb_gates 36>,
+ <&tcon_ch0_clk>,
+ <&tcon_ch1_clk>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon-pixel-clock";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon0_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+
+ tcon0_out_tve0: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tve0_in_tcon0>;
+ };
+ };
+ };
+};
+
+fe0: display-frontend@1e00000 {
+ compatible = "allwinner,sun5i-a13-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <47>;
+ clocks = <&ahb_gates 46>, <&de_fe_clk>,
+ <&dram_gates 25>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&de_fe_clk>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint {
+ remote-endpoint = <&be0_in_fe0>;
+ };
+ };
+ };
+};
+
+be0: display-backend@1e60000 {
+ compatible = "allwinner,sun5i-a13-display-backend";
+ reg = <0x01e60000 0x10000>;
+ clocks = <&ahb_gates 44>, <&de_be_clk>,
+ <&dram_gates 26>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&de_be_clk>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_be0>;
+ };
+ };
+ };
+};
+
+display-engine {
+ compatible = "allwinner,sun5i-a13-display-engine";
+ allwinner,pipelines = <&fe0>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4454483cc53f..a7440bcd67ff 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -23,6 +23,7 @@ amlogic Amlogic, Inc.
ampire Ampire Co., Ltd.
ams AMS AG
amstaos AMS-Taos Inc.
+analogix Analogix Semiconductor, Inc.
apm Applied Micro Circuits Corporation (APM)
aptina Aptina Imaging
arasan Arasan Chip Systems
@@ -185,6 +186,7 @@ okaya Okaya Electric America, Inc.
olimex OLIMEX Ltd.
onion Onion Corporation
onnn ON Semiconductor Corp.
+ontat On Tat Industrial Company
opencores OpenCores.org
option Option NV
ortustech Ortus Technology Co., Ltd.
@@ -261,6 +263,7 @@ toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
tplink TP-LINK Technologies Co., Ltd.
+tpk TPK U.S.A. LLC
tronfy Tronfy
tronsmart Tronsmart
truly Truly Semiconductors Limited
diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
new file mode 100644
index 000000000000..b2a22c28c9b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
@@ -0,0 +1,40 @@
+Analogix ANX7814 SlimPort (Full-HD Transmitter)
+-----------------------------------------------
+
+The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
+designed for portable devices.
+
+Required properties:
+
+ - compatible : "analogix,anx7814"
+ - reg : I2C address of the device
+ - interrupt-parent : Should be the phandle of the interrupt controller
+ that services interrupts for this device
+ - interrupts : Should contain the INTP interrupt
+ - hpd-gpios : Which GPIO to use for hpd
+ - pd-gpios : Which GPIO to use for power down
+ - reset-gpios : Which GPIO to use for reset
+
+Optional properties:
+
+ - dvdd10-supply : Regulator for 1.0V digital core power.
+ - Video port for HDMI input, using the DT bindings defined in [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ anx7814: anx7814@38 {
+ compatible = "analogix,anx7814";
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
+ hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+ pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+ port {
+ anx7814_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };