diff options
Diffstat (limited to 'Documentation')
33 files changed, 163 insertions, 55 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index fde21d900420..859501366777 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -468,6 +468,7 @@ Description: auto: Charge normally, respect thresholds inhibit-charge: Do not charge while AC is attached force-discharge: Force discharge while AC is attached + ================ ==================================== What: /sys/class/power_supply/<supply_name>/technology Date: May 2007 diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing index b363827da437..910df0e5815a 100644 --- a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing +++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing @@ -1,4 +1,4 @@ -What: /sys/bus/platform/drivers/aspeed-uart-routing/*/uart* +What: /sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\* Date: September 2021 Contact: Oskar Senft <osk@google.com> Chia-Wei Wang <chiawei_wang@aspeedtech.com> @@ -9,7 +9,7 @@ Description: Selects the RX source of the UARTx device. depends on the selected file. e.g. - cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1 + cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1 [io1] io2 io3 io4 uart2 uart3 uart4 io6 In this case, UART1 gets its input from IO1 (physical serial port 1). @@ -17,7 +17,7 @@ Description: Selects the RX source of the UARTx device. Users: OpenBMC. Proposed changes should be mailed to openbmc@lists.ozlabs.org -What: /sys/bus/platform/drivers/aspeed-uart-routing/*/io* +What: /sys/bus/platform/drivers/aspeed-uart-routing/\*/io\* Date: September 2021 Contact: Oskar Senft <osk@google.com> Chia-Wei Wang <chiawei_wang@aspeedtech.com> diff --git a/Documentation/accounting/psi.rst b/Documentation/accounting/psi.rst index f2b3439edcc2..860fe651d645 100644 --- a/Documentation/accounting/psi.rst +++ b/Documentation/accounting/psi.rst @@ -92,7 +92,8 @@ Triggers can be set on more than one psi metric and more than one trigger for the same psi metric can be specified. However for each trigger a separate file descriptor is required to be able to poll it separately from others, therefore for each trigger a separate open() syscall should be made even -when opening the same psi interface file. +when opening the same psi interface file. Write operations to a file descriptor +with an already existing psi trigger will fail with EBUSY. Monitors activate only when system enters stall state for the monitored psi metric and deactivates upon exit from the stall state. While system is diff --git a/Documentation/admin-guide/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst index 7db367572f30..f6861ca16ffe 100644 --- a/Documentation/admin-guide/gpio/index.rst +++ b/Documentation/admin-guide/gpio/index.rst @@ -10,6 +10,7 @@ gpio gpio-aggregator sysfs gpio-mockup + gpio-sim .. only:: subproject and html diff --git a/Documentation/arm/marvell.rst b/Documentation/arm/marvell.rst index 9485a5a2e2e9..2f41caa0096c 100644 --- a/Documentation/arm/marvell.rst +++ b/Documentation/arm/marvell.rst @@ -266,10 +266,12 @@ Avanta family ------------- Flavors: + - 88F6500 - 88F6510 - 88F6530P - 88F6550 - 88F6560 + - 88F6601 Homepage: https://web.archive.org/web/20181005145041/http://www.marvell.com/broadband/ diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 5342e895fb60..ea281dd75517 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -52,6 +52,12 @@ stable kernels. | Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2064142 | ARM64_ERRATUM_2064142 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2038923 | ARM64_ERRATUM_2038923 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #1902691 | ARM64_ERRATUM_1902691 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 | @@ -92,12 +98,20 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A77 | #1508412 | ARM64_ERRATUM_1508412 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2051678 | ARM64_ERRATUM_2051678 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2077057 | ARM64_ERRATUM_2077057 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2119858 | ARM64_ERRATUM_2119858 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2054223 | ARM64_ERRATUM_2054223 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2224489 | ARM64_ERRATUM_2224489 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X2 | #2119858 | ARM64_ERRATUM_2119858 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X2 | #2224489 | ARM64_ERRATUM_2224489 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1188873,1418040| ARM64_ERRATUM_1418040 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1349291 | N/A | diff --git a/Documentation/cpu-freq/cpu-drivers.rst b/Documentation/cpu-freq/cpu-drivers.rst index 3b32336a7803..d84ededb66f9 100644 --- a/Documentation/cpu-freq/cpu-drivers.rst +++ b/Documentation/cpu-freq/cpu-drivers.rst @@ -75,6 +75,9 @@ And optionally .resume - A pointer to a per-policy resume function which is called with interrupts disabled and _before_ the governor is started again. + .ready - A pointer to a per-policy ready function which is called after + the policy is fully initialized. + .attr - A pointer to a NULL-terminated list of "struct freq_attr" which allow to export values to sysfs. diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index dcefee707ccd..a833ecf12fbc 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -7,6 +7,14 @@ directory. These are intended to be small tests to exercise individual code paths in the kernel. Tests are intended to be run after building, installing and booting a kernel. +Kselftest from mainline can be run on older stable kernels. Running tests +from mainline offers the best coverage. Several test rings run mainline +kselftest suite on stable releases. The reason is that when a new test +gets added to test existing code to regression test a bug, we should be +able to run that test on an older kernel. Hence, it is important to keep +code that can still test an older kernel and make sure it skips the test +gracefully on newer releases. + You can find additional information on Kselftest framework, how to write new tests using the framework on Kselftest wiki: diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 76af931a332c..1c83e7d60a8a 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -242,7 +242,7 @@ example: int rectangle_area(struct shape *this) { - struct rectangle *self = container_of(this, struct shape, parent); + struct rectangle *self = container_of(this, struct rectangle, parent); return self->length * self->width; }; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index e77635c5422c..fa8b31660cad 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -119,6 +119,9 @@ Boards (incomplete list of examples): - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" +- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk + compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3" + - OMAP3 Tobi with Overo : Commercial expansion board with daughter board compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml index e04349567eeb..427c5873f96a 100644 --- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml @@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: SiFive GPIO controller maintainers: - - Yash Shah <yash.shah@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> properties: diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index 79d0358e2f61..620f01775e42 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -36,6 +36,7 @@ properties: - renesas,intc-ex-r8a77980 # R-Car V3H - renesas,intc-ex-r8a77990 # R-Car E3 - renesas,intc-ex-r8a77995 # R-Car D3 + - renesas,intc-ex-r8a779a0 # R-Car V3U - const: renesas,irqc '#interrupt-cells': diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 28b6b17fe4b2..27092c6a86c4 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -35,6 +35,10 @@ description: contains a specific memory layout, which is documented in chapter 8 of the SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>. + The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the + T-HEAD PLIC implementation requires setting a delegation bit to allow access + from S-mode. So add thead,c900-plic to distinguish them. + maintainers: - Sagar Kadam <sagar.kadam@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> @@ -42,12 +46,17 @@ maintainers: properties: compatible: - items: - - enum: - - sifive,fu540-c000-plic - - starfive,jh7100-plic - - canaan,k210-plic - - const: sifive,plic-1.0.0 + oneOf: + - items: + - enum: + - sifive,fu540-c000-plic + - starfive,jh7100-plic + - canaan,k210-plic + - const: sifive,plic-1.0.0 + - items: + - enum: + - allwinner,sun20i-d1-plic + - const: thead,c900-plic reg: maxItems: 1 @@ -62,6 +71,7 @@ properties: interrupts-extended: minItems: 1 + maxItems: 15872 description: Specifies which contexts are connected to the PLIC, with "-1" specifying that a context is not present. Each node pointed to should be a @@ -90,12 +100,11 @@ examples: #interrupt-cells = <1>; compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; interrupt-controller; - interrupts-extended = < - &cpu0_intc 11 - &cpu1_intc 11 &cpu1_intc 9 - &cpu2_intc 11 &cpu2_intc 9 - &cpu3_intc 11 &cpu3_intc 9 - &cpu4_intc 11 &cpu4_intc 9>; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; reg = <0xc000000 0x4000000>; riscv,ndev = <10>; }; diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 272832e9f8f2..fa86691ebf16 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -20,7 +20,7 @@ description: | maintainers: - Kishon Vijay Abraham I <kishon@ti.com> - - Roger Quadros <rogerq@ti.com + - Roger Quadros <rogerq@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 0968b40aef1e..e3501bfa22e9 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 { #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <10000000>; - bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index b86edf67ce62..58ecc62adfaa 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -107,6 +107,10 @@ properties: - const: imem - const: config + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the AOSS side-channel message RAM + qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. @@ -222,6 +226,8 @@ examples: "imem", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid", diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index cbbf5e8b1197..f78d3246fbdc 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -8,7 +8,7 @@ title: OMAP USB2 PHY maintainers: - Kishon Vijay Abraham I <kishon@ti.com> - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml index 84e66913d042..db41cd7bf150 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml @@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: SiFive PWM controller maintainers: - - Yash Shah <yash.shah@sifive.com> - Sagar Kadam <sagar.kadam@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 2b1f91603897..e2d330bd4608 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -9,7 +9,6 @@ title: SiFive L2 Cache Controller maintainers: - Sagar Kadam <sagar.kadam@sifive.com> - - Yash Shah <yash.shah@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> description: diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index 77adbebed824..c3e9f3485449 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -8,6 +8,7 @@ title: Audio codec controlled by ChromeOS EC maintainers: - Cheng-Yi Chiang <cychiang@chromium.org> + - Tzung-Bi Shih <tzungbi@google.com> description: | Google's ChromeOS EC codec is a digital mic codec provided by the diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5dd209206e88..3ec2d7b83775 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -23,8 +23,9 @@ properties: minItems: 1 maxItems: 256 items: - minimum: 0 - maximum: 256 + items: + - minimum: 0 + maximum: 256 description: Chip select used by the device. diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index a634774c537c..eedde385d299 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller maintainers: - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index f6e91a5fd8fe..4f7a212fddd3 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI Keystone Soc USB Controller maintainers: - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: diff --git a/Documentation/filesystems/netfs_library.rst b/Documentation/filesystems/netfs_library.rst index 136f8da3d0e2..4f373a8ec47b 100644 --- a/Documentation/filesystems/netfs_library.rst +++ b/Documentation/filesystems/netfs_library.rst @@ -462,6 +462,10 @@ operation table looks like the following:: struct iov_iter *iter, netfs_io_terminated_t term_func, void *term_func_priv); + + int (*query_occupancy)(struct netfs_cache_resources *cres, + loff_t start, size_t len, size_t granularity, + loff_t *_data_start, size_t *_data_len); }; With a termination handler function pointer:: @@ -536,6 +540,18 @@ The methods defined in the table are: indicating whether the termination is definitely happening in the caller's context. + * ``query_occupancy()`` + + [Required] Called to find out where the next piece of data is within a + particular region of the cache. The start and length of the region to be + queried are passed in, along with the granularity to which the answer needs + to be aligned. The function passes back the start and length of the data, + if any, available within that region. Note that there may be a hole at the + front. + + It returns 0 if some data was found, -ENODATA if there was no usable data + within the region or -ENOBUFS if there is no caching on this file. + Note that these methods are passed a pointer to the cache resource structure, not the read request structure as they could be used in other situations where there isn't a read request structure as well, such as writing dirty data to the diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index da138dd39883..a1212b5b3026 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -300,30 +300,6 @@ Contact: Daniel Vetter, Noralf Tronnes Level: Advanced -Garbage collect fbdev scrolling acceleration --------------------------------------------- - -Scroll acceleration has been disabled in fbcon. Now it works as the old -SCROLL_REDRAW mode. A ton of code was removed in fbcon.c and the hook bmove was -removed from fbcon_ops. -Remaining tasks: - -- a bunch of the hooks in fbcon_ops could be removed or simplified by calling - directly instead of the function table (with a switch on p->rotate) - -- fb_copyarea is unused after this, and can be deleted from all drivers - -- after that, fb_copyarea can be deleted from fb_ops in include/linux/fb.h as - well as cfb_copyarea - -Note that not all acceleration code can be deleted, since clearing and cursor -support is still accelerated, which might be good candidates for further -deletion projects. - -Contact: Daniel Vetter - -Level: Intermediate - idr_init_base() --------------- diff --git a/Documentation/index.rst b/Documentation/index.rst index 2b4de3926858..b58692d687f6 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -166,6 +166,7 @@ to ReStructured Text format, or are simply too old. .. toctree:: :maxdepth: 2 + tools/index staging/index watch_queue diff --git a/Documentation/kernel-hacking/locking.rst b/Documentation/kernel-hacking/locking.rst index e6cd40663ea5..4cbd50edf277 100644 --- a/Documentation/kernel-hacking/locking.rst +++ b/Documentation/kernel-hacking/locking.rst @@ -295,7 +295,7 @@ Pete Zaitcev gives the following summary: - If you are in a process context (any syscall) and want to lock other process out, use a mutex. You can take a mutex and sleep - (``copy_from_user*(`` or ``kmalloc(x,GFP_KERNEL)``). + (``copy_from_user()`` or ``kmalloc(x,GFP_KERNEL)``). - Otherwise (== data can be touched in an interrupt), use spin_lock_irqsave() and diff --git a/Documentation/tools/index.rst b/Documentation/tools/index.rst new file mode 100644 index 000000000000..0bb1e61bdcc0 --- /dev/null +++ b/Documentation/tools/index.rst @@ -0,0 +1,20 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Kernel tools +============ + +This book covers user-space tools that are shipped with the kernel source; +more additions are needed here: + +.. toctree:: + :maxdepth: 1 + + rtla/index + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/tools/rtla/index.rst b/Documentation/tools/rtla/index.rst new file mode 100644 index 000000000000..840f0bf3e803 --- /dev/null +++ b/Documentation/tools/rtla/index.rst @@ -0,0 +1,26 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +The realtime Linux analysis tool +================================ + +RTLA provides a set of tools for the analysis of the kernel's realtime +behavior on specific hardware. + +.. toctree:: + :maxdepth: 1 + + rtla + rtla-osnoise + rtla-osnoise-hist + rtla-osnoise-top + rtla-timerlat + rtla-timerlat-hist + rtla-timerlat-top + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst b/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst index 87a36044f828..2ca92042767b 100644 --- a/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst +++ b/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst @@ -84,6 +84,8 @@ CPUfreq核心层注册一个cpufreq_driver结构体。 .resume - 一个指向per-policy恢复函数的指针，该函数在关中断且在调节器再一次启动前被 调用。 + .ready - 一个指向per-policy准备函数的指针，该函数在策略完全初始化之后被调用。 + .attr - 一个指向NULL结尾的"struct freq_attr"列表的指针，该列表允许导出值到 sysfs。 diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 687efcf245c1..e6fce2cbd99e 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -115,6 +115,7 @@ Code Seq# Include File Comments 'B' 00-1F linux/cciss_ioctl.h conflict! 'B' 00-0F include/linux/pmu.h conflict! 'B' C0-FF advanced bbus <mailto:maassen@uni-freiburg.de> +'B' 00-0F xen/xenbus_dev.h conflict! 'C' all linux/soundcard.h conflict! 'C' 01-2F linux/capi.h conflict! 'C' F0-FF drivers/net/wan/cosa.h conflict! @@ -134,6 +135,7 @@ Code Seq# Include File Comments 'F' 80-8F linux/arcfb.h conflict! 'F' DD video/sstfb.h conflict! 'G' 00-3F drivers/misc/sgi-gru/grulib.h conflict! +'G' 00-0F xen/gntalloc.h, xen/gntdev.h conflict! 'H' 00-7F linux/hiddev.h conflict! 'H' 00-0F linux/hidraw.h conflict! 'H' 01 linux/mei.h conflict! @@ -176,6 +178,7 @@ Code Seq# Include File Comments 'P' 60-6F sound/sscape_ioctl.h conflict! 'P' 00-0F drivers/usb/class/usblp.c conflict! 'P' 01-09 drivers/misc/pci_endpoint_test.c conflict! +'P' 00-0F xen/privcmd.h conflict! 'Q' all linux/soundcard.h 'R' 00-1F linux/random.h conflict! 'R' 01 linux/rfkill.h conflict! diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index bb8cfddbb22d..9f3172376ec3 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -1394,7 +1394,7 @@ documentation when it pops into existence). ------------------- :Capability: KVM_CAP_ENABLE_CAP -:Architectures: mips, ppc, s390 +:Architectures: mips, ppc, s390, x86 :Type: vcpu ioctl :Parameters: struct kvm_enable_cap (in) :Returns: 0 on success; -1 on error @@ -3268,6 +3268,7 @@ number. :Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device, KVM_CAP_VCPU_ATTRIBUTES for vcpu device + KVM_CAP_SYS_ATTRIBUTES for system (/dev/kvm) device (no set) :Type: device ioctl, vm ioctl, vcpu ioctl :Parameters: struct kvm_device_attr :Returns: 0 on success, -1 on error @@ -3302,7 +3303,8 @@ transferred is defined by the particular attribute. ------------------------ :Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device, - KVM_CAP_VCPU_ATTRIBUTES for vcpu device + KVM_CAP_VCPU_ATTRIBUTES for vcpu device + KVM_CAP_SYS_ATTRIBUTES for system (/dev/kvm) device :Type: device ioctl, vm ioctl, vcpu ioctl :Parameters: struct kvm_device_attr :Returns: 0 on success, -1 on error @@ -6995,6 +6997,20 @@ indicated by the fd to the VM this is called on. This is intended to support intra-host migration of VMs between userspace VMMs, upgrading the VMM process without interrupting the guest. +7.30 KVM_CAP_PPC_AIL_MODE_3 +------------------------------- + +:Capability: KVM_CAP_PPC_AIL_MODE_3 +:Architectures: ppc +:Type: vm + +This capability indicates that the kernel supports the mode 3 setting for the +"Address Translation Mode on Interrupt" aka "Alternate Interrupt Location" +resource that is controlled with the H_SET_MODE hypercall. + +This capability allows a guest kernel to use a better-performance mode for +handling interrupts and system calls. + 8. Other capabilities. ====================== diff --git a/Documentation/vm/page_table_check.rst b/Documentation/vm/page_table_check.rst index 81f521ff7ea7..1a09472f10a3 100644 --- a/Documentation/vm/page_table_check.rst +++ b/Documentation/vm/page_table_check.rst @@ -9,7 +9,7 @@ Page Table Check Introduction ============ -Page table check allows to hardern the kernel by ensuring that some types of +Page table check allows to harden the kernel by ensuring that some types of the memory corruptions are prevented. Page table check performs extra verifications at the time when new pages become |