diff options
Diffstat (limited to 'Documentation')
933 files changed, 28863 insertions, 11194 deletions
diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 831f19a32e08..cea8856f798d 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -21,6 +21,59 @@ Description: device is offset from the internal allocation unit's natural alignment. +What: /sys/block/<disk>/atomic_write_max_bytes +Date: February 2024 +Contact: Himanshu Madhani <himanshu.madhani@oracle.com> +Description: + [RO] This parameter specifies the maximum atomic write + size reported by the device. This parameter is relevant + for merging of writes, where a merged atomic write + operation must not exceed this number of bytes. + This parameter may be greater than the value in + atomic_write_unit_max_bytes as + atomic_write_unit_max_bytes will be rounded down to a + power-of-two and atomic_write_unit_max_bytes may also be + limited by some other queue limits, such as max_segments. + This parameter - along with atomic_write_unit_min_bytes + and atomic_write_unit_max_bytes - will not be larger than + max_hw_sectors_kb, but may be larger than max_sectors_kb. + + +What: /sys/block/<disk>/atomic_write_unit_min_bytes +Date: February 2024 +Contact: Himanshu Madhani <himanshu.madhani@oracle.com> +Description: + [RO] This parameter specifies the smallest block which can + be written atomically with an atomic write operation. All + atomic write operations must begin at a + atomic_write_unit_min boundary and must be multiples of + atomic_write_unit_min. This value must be a power-of-two. + + +What: /sys/block/<disk>/atomic_write_unit_max_bytes +Date: February 2024 +Contact: Himanshu Madhani <himanshu.madhani@oracle.com> +Description: + [RO] This parameter defines the largest block which can be + written atomically with an atomic write operation. This + value must be a multiple of atomic_write_unit_min and must + be a power-of-two. This value will not be larger than + atomic_write_max_bytes. + + +What: /sys/block/<disk>/atomic_write_boundary_bytes +Date: February 2024 +Contact: Himanshu Madhani <himanshu.madhani@oracle.com> +Description: + [RO] A device may need to internally split an atomic write I/O + which straddles a given logical block address boundary. This + parameter specifies the size in bytes of the atomic boundary if + one is reported by the device. This value must be a + power-of-two and at least the size as in + atomic_write_unit_max_bytes. + Any attempt to merge atomic write I/Os must not result in a + merged I/O which crosses this boundary (if any). + What: /sys/block/<disk>/diskseq Date: February 2021 diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem index c399323f37de..aa89adf18bc5 100644 --- a/Documentation/ABI/stable/sysfs-bus-nvmem +++ b/Documentation/ABI/stable/sysfs-bus-nvmem @@ -1,6 +1,23 @@ +What: /sys/bus/nvmem/devices/.../force_ro +Date: June 2024 +KernelVersion: 6.11 +Contact: Marek Vasut <marex@denx.de> +Description: + This read/write attribute allows users to set read-write + devices as read-only and back to read-write from userspace. + This can be used to unlock and relock write-protection of + devices which are generally locked, except during sporadic + programming operation. + Read returns '0' or '1' for read-write or read-only modes + respectively. + Write parses one of 'YyTt1NnFf0', or [oO][NnFf] for "on" + and "off", i.e. what kstrbool() supports. + Note: This file is only present if CONFIG_NVMEM_SYSFS + is enabled. + What: /sys/bus/nvmem/devices/.../nvmem Date: July 2015 -KernelVersion: 4.2 +KernelVersion: 4.2 Contact: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Description: This file allows user to read/write the raw NVMEM contents. @@ -20,3 +37,14 @@ Description: ... * 0001000 + +What: /sys/bus/nvmem/devices/.../type +Date: November 2018 +KernelVersion: 5.0 +Contact: Alexandre Belloni <alexandre.belloni@bootlin.com> +Description: + This read-only attribute allows user to read the NVMEM + device type. Supported types are "Unknown", "EEPROM", + "OTP", "Battery backed", "FRAM". + Note: This file is only present if CONFIG_NVMEM_SYSFS + is enabled. diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight index 023fb52645f8..6102d6bebdf9 100644 --- a/Documentation/ABI/stable/sysfs-class-backlight +++ b/Documentation/ABI/stable/sysfs-class-backlight @@ -3,10 +3,11 @@ Date: April 2005 KernelVersion: 2.6.12 Contact: Richard Purdie <rpurdie@rpsys.net> Description: - Control BACKLIGHT power, values are FB_BLANK_* from fb.h + Control BACKLIGHT power, values are compatible with + FB_BLANK_* from fb.h - - FB_BLANK_UNBLANK (0) : power on. - - FB_BLANK_POWERDOWN (4) : power off + - 0 (FB_BLANK_UNBLANK) : power on. + - 4 (FB_BLANK_POWERDOWN) : power off Users: HAL What: /sys/class/backlight/<backlight>/brightness diff --git a/Documentation/ABI/stable/sysfs-driver-misc-cp500 b/Documentation/ABI/stable/sysfs-driver-misc-cp500 new file mode 100644 index 000000000000..525bd18a2db4 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-misc-cp500 @@ -0,0 +1,25 @@ +What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/0000:XX:XX.X/version +Date: June 2024 +KernelVersion: 6.11 +Contact: Gerhard Engleder <eg@keba.com> +Description: Version of the FPGA configuration bitstream as printable string. + This file is read only. +Users: KEBA + +What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/0000:XX:XX.X/keep_cfg +Date: June 2024 +KernelVersion: 6.11 +Contact: Gerhard Engleder <eg@keba.com> +Description: Flag which signals if FPGA shall keep or reload configuration + bitstream on reset. Normal FPGA behavior and default is to keep + configuration bitstream and to only reset the configured logic. + + Reloading configuration on reset enables an update of the + configuration bitstream with a simple reboot. Otherwise it is + necessary to power cycle the device to reload the new + configuration bitstream. + + This file is read/write. The values are as follows: + 1 = keep configuration bitstream on reset, default + 0 = reload configuration bitstream on reset +Users: KEBA diff --git a/Documentation/ABI/testing/configfs-tsm b/Documentation/ABI/testing/configfs-tsm index dd24202b5ba5..534408bc1408 100644 --- a/Documentation/ABI/testing/configfs-tsm +++ b/Documentation/ABI/testing/configfs-tsm @@ -31,6 +31,18 @@ Description: Standardization v2.03 Section 4.1.8.1 MSG_REPORT_REQ. https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/specifications/56421.pdf +What: /sys/kernel/config/tsm/report/$name/manifestblob +Date: January, 2024 +KernelVersion: v6.10 +Contact: linux-coco@lists.linux.dev +Description: + (RO) Optional supplemental data that a TSM may emit, visibility + of this attribute depends on TSM, and may be empty if no + manifest data is available. + + See 'service_provider' for information on the format of the + manifest blob. + What: /sys/kernel/config/tsm/report/$name/provider Date: September, 2023 KernelVersion: v6.7 @@ -80,3 +92,54 @@ Contact: linux-coco@lists.linux.dev Description: (RO) Indicates the minimum permissible value that can be written to @privlevel. + +What: /sys/kernel/config/tsm/report/$name/service_provider +Date: January, 2024 +KernelVersion: v6.10 +Contact: linux-coco@lists.linux.dev +Description: + (WO) Attribute is visible if a TSM implementation provider + supports the concept of attestation reports from a service + provider for TVMs, like SEV-SNP running under an SVSM. + Specifying the service provider via this attribute will create + an attestation report as specified by the service provider. + The only currently supported service provider is "svsm". + + For the "svsm" service provider, see the Secure VM Service Module + for SEV-SNP Guests v1.00 Section 7. For the doc, search for + "site:amd.com "Secure VM Service Module for SEV-SNP + Guests", docID: 58019" + +What: /sys/kernel/config/tsm/report/$name/service_guid +Date: January, 2024 +KernelVersion: v6.10 +Contact: linux-coco@lists.linux.dev +Description: + (WO) Attribute is visible if a TSM implementation provider + supports the concept of attestation reports from a service + provider for TVMs, like SEV-SNP running under an SVSM. + Specifying an empty/null GUID (00000000-0000-0000-0000-000000) + requests all active services within the service provider be + part of the attestation report. Specifying a GUID request + an attestation report of just the specified service using the + manifest form specified by the service_manifest_version + attribute. + + See 'service_provider' for information on the format of the + service guid. + +What: /sys/kernel/config/tsm/report/$name/service_manifest_version +Date: January, 2024 +KernelVersion: v6.10 +Contact: linux-coco@lists.linux.dev +Description: + (WO) Attribute is visible if a TSM implementation provider + supports the concept of attestation reports from a service + provider for TVMs, like SEV-SNP running under an SVSM. + Indicates the service manifest version requested for the + attestation report (default 0). If this field is not set by + the user, the default manifest version of the service (the + service's initial/first manifest version) is returned. + + See 'service_provider' for information on the format of the + service manifest version. diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl index c61f9b813973..12488c14be64 100644 --- a/Documentation/ABI/testing/debugfs-cxl +++ b/Documentation/ABI/testing/debugfs-cxl @@ -14,9 +14,10 @@ Description: event to its internal Informational Event log, updates the Event Status register, and if configured, interrupts the host. It is not an error to inject poison into an address that - already has poison present and no error is returned. The - inject_poison attribute is only visible for devices supporting - the capability. + already has poison present and no error is returned. If the + device returns 'Inject Poison Limit Reached' an -EBUSY error + is returned to the user. The inject_poison attribute is only + visible for devices supporting the capability. What: /sys/kernel/debug/memX/clear_poison diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs index a7a432dc4015..3318a14f35b9 100644 --- a/Documentation/ABI/testing/debugfs-driver-habanalabs +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs @@ -217,7 +217,7 @@ Description: Displays the hop values and physical address for a given ASID and virtual address. The user should write the ASID and VA into the file and then read the file to get the result. e.g. to display info about VA 0x1000 for ASID 1 you need to do: - echo "1 0x1000" > /sys/kernel/debug/accel/0/mmu + echo "1 0x1000" > /sys/kernel/debug/accel/<parent_device>/mmu What: /sys/kernel/debug/accel/<parent_device>/mmu_error Date: Mar 2021 @@ -226,8 +226,8 @@ Contact: fkassabri@habana.ai Description: Check and display page fault or access violation mmu errors for all MMUs specified in mmu_cap_mask. e.g. to display error info for MMU hw cap bit 9, you need to do: - echo "0x200" > /sys/kernel/debug/accel/0/mmu_error - cat /sys/kernel/debug/accel/0/mmu_error + echo "0x200" > /sys/kernel/debug/accel/<parent_device>/mmu_error + cat /sys/kernel/debug/accel/<parent_device>/mmu_error What: /sys/kernel/debug/accel/<parent_device>/monitor_dump Date: Mar 2022 @@ -253,6 +253,12 @@ Description: Triggers dump of monitor data. The value to trigger the operatio When the write is finished, the user can read the "monitor_dump" blob +What: /sys/kernel/debug/accel/<parent_device>/server_type +Date: Feb 2024 +KernelVersion: 6.11 +Contact: trisin@habana.ai +Description: Exposes the device's server type, maps to enum hl_server_type. + What: /sys/kernel/debug/accel/<parent_device>/set_power_state Date: Jan 2019 KernelVersion: 5.1 diff --git a/Documentation/ABI/testing/debugfs-tpmi b/Documentation/ABI/testing/debugfs-tpmi index 597f0475fe6e..c493a1403d2f 100644 --- a/Documentation/ABI/testing/debugfs-tpmi +++ b/Documentation/ABI/testing/debugfs-tpmi @@ -29,3 +29,12 @@ Example: echo 0,0x20,0xff > mem_write echo 1,64,64 > mem_write Users: Debugging, any user space test suite + +What: /sys/kernel/debug/tpmi-<n>/plr/domain<n>/status +Date: Aug 2024 +KernelVersion: 6.11 +Contact: Tero Kristo <tero.kristo@linux.intel.com> +Description: +Shows the currently active Performance Limit Reasons for die level and the +individual CPUs under the die. The contents of this file are sticky, and +clearing all the statuses can be done by writing "0\n" to this file. diff --git a/Documentation/ABI/testing/sysfs-bus-auxiliary b/Documentation/ABI/testing/sysfs-bus-auxiliary new file mode 100644 index 000000000000..cc856079690f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-auxiliary @@ -0,0 +1,9 @@ +What: /sys/bus/auxiliary/devices/.../irqs/ +Date: April, 2024 +Contact: Shay Drory <shayd@nvidia.com> +Description: + The /sys/devices/.../irqs directory contains a variable set of + files, with each file is named as irq number similar to PCI PF + or VF's irq number located in msi_irqs directory. + These irq files are added and removed dynamically when an IRQ + is requested and freed respectively for the PCI SF. diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu new file mode 100644 index 000000000000..307a55f599cb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu @@ -0,0 +1,113 @@ +What: /sys/bus/i2c/devices/<mcu_device>/board_revision +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains board revision number. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %u. + +What: /sys/bus/i2c/devices/<mcu_device>/first_mac_address +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains device first MAC address. Each Turris Omnia is + allocated 3 MAC addresses. The two additional addresses are + computed from the first one by incrementing it. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %pM. + +What: /sys/bus/i2c/devices/<mcu_device>/front_button_mode +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RW) The front button on the Turris Omnia router can be + configured either to change the intensity of all the LEDs on the + front panel, or to send the press event to the CPU as an + interrupt. + + This file switches between these two modes: + - "mcu" makes the button press event be handled by the MCU to + change the LEDs panel intensity. + - "cpu" makes the button press event be handled by the CPU. + + Format: %s. + +What: /sys/bus/i2c/devices/<mcu_device>/front_button_poweron +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RW) Newer versions of the microcontroller firmware of the + Turris Omnia router support powering off the router into true + low power mode. The router can be powered on by pressing the + front button. + + This file configures whether front button power on is enabled. + + This file is present only if the power off feature is supported + by the firmware. + + Format: %i. + +What: /sys/bus/i2c/devices/<mcu_device>/fw_features +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Newer versions of the microcontroller firmware report the + features they support. These can be read from this file. If the + MCU firmware is too old, this file reads 0x0. + + Format: 0x%x. + +What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_application +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the version hash (commit hash) of the application + part of the microcontroller firmware. + + Format: %s. + +What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_bootloader +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the version hash (commit hash) of the bootloader + part of the microcontroller firmware. + + Format: %s. + +What: /sys/bus/i2c/devices/<mcu_device>/mcu_type +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the microcontroller type (STM32, GD32, MKL). + + Format: %s. + +What: /sys/bus/i2c/devices/<mcu_device>/reset_selector +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the selected factory reset level, determined by + how long the rear reset button was held by the user during board + reset. + + Format: %i. + +What: /sys/bus/i2c/devices/<mcu_device>/serial_number +Date: September 2024 +KernelVersion: 6.11 +Contact: Marek Behún <kabel@kernel.org> +Description: (RO) Contains the 64-bit board serial number in hexadecimal + format. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %016X. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-inv_icm42600 b/Documentation/ABI/testing/sysfs-bus-iio-inv_icm42600 new file mode 100644 index 000000000000..7eeacfb7650d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-inv_icm42600 @@ -0,0 +1,18 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_accel_power_mode +KernelVersion: 6.11 +Contact: linux-iio@vger.kernel.org +Description: + Accelerometer power mode. Setting this attribute will set the + requested power mode to use if the ODR support it. If ODR + support only 1 mode, power mode will be enforced. + Reading this attribute will return the current accelerometer + power mode if the sensor is on, or the requested value if the + sensor is off. The value between real and requested value can + be different for ODR supporting only 1 mode. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_power_mode_available +KernelVersion: 6.11 +Contact: linux-iio@vger.kernel.org +Description: + List of available accelerometer power modes that can be set in + in_accel_power_mode attribute. diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd index 5a775b8f6543..fc82aa4e54b0 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd +++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd @@ -75,3 +75,13 @@ Description: The default value is 1 (GNU Remote Debug command). Other permissible value is 0 which is for vendor defined debug target. + +What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_poll_interval_ms +Date: February 2024 +Contact: Mathias Nyman <mathias.nyman@linux.intel.com> +Description: + This attribute adjust the polling interval used to check for + DbC events. Unit is milliseconds. Accepted values range from 0 + up to 5000. The default value is 64 ms. + This polling interval is used while DbC is enabled but has no + active data transfers. diff --git a/Documentation/ABI/testing/sysfs-bus-wmi b/Documentation/ABI/testing/sysfs-bus-wmi new file mode 100644 index 000000000000..aadb35b82198 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-wmi @@ -0,0 +1,81 @@ +What: /sys/bus/wmi/devices/.../driver_override +Date: February 2024 +Contact: Armin Wolf <W_Armin@gmx.de> +Description: + This file allows the driver for a device to be specified which + will override standard ID table matching. + When specified, only a driver with a name matching the value + written to driver_override will have an opportunity to bind + to the device. + The override is specified by writing a string to the + driver_override file (echo wmi-event-dummy > driver_override). + The override may be cleared with an empty string (echo > \ + driver_override) which returns the device to standard matching + rules binding. + Writing to driver_override does not automatically unbind the + device from its current driver or make any attempt to automatically + load the specified driver. If no driver with a matching name is + currently loaded in the kernel, the device will not bind to any + driver. + This also allows devices to opt-out of driver binding using a + driver_override name such as "none". Only a single driver may be + specified in the override, there is no support for parsing delimiters. + +What: /sys/bus/wmi/devices/.../modalias +Date: November 20:15 +Contact: Andy Lutomirski <luto@kernel.org> +Description: + This file contains the MODALIAS value emitted by uevent for a + given WMI device. + + Format: wmi:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX. + +What: /sys/bus/wmi/devices/.../guid +Date: November 2015 +Contact: Andy Lutomirski <luto@kernel.org> +Description: + This file contains the GUID used to match WMI devices to + compatible WMI drivers. This GUID is not necessarily unique + inside a given machine, it is solely used to identify the + interface exposed by a given WMI device. + +What: /sys/bus/wmi/devices/.../object_id +Date: November 2015 +Contact: Andy Lutomirski <luto@kernel.org> +Description: + This file contains the WMI object ID used internally to construct + the ACPI method names used by non-event WMI devices. It contains + two ASCII letters. + +What: /sys/bus/wmi/devices/.../notify_id +Date: November 2015 +Contact: Andy Lutomirski <luto@kernel.org> +Description: + This file contains the WMI notify ID used internally to map ACPI + events to WMI event devices. It contains two ASCII letters. + +What: /sys/bus/wmi/devices/.../instance_count +Date: November 2015 +Contact: Andy Lutomirski <luto@kernel.org> +Description: + This file contains the number of WMI object instances being + present on a given WMI device. It contains a non-negative + number. + +What: /sys/bus/wmi/devices/.../expensive +Date: November 2015 +Contact: Andy Lutomirski <luto@kernel.org> +Description: + This file contains a boolean flag signaling if interacting with + the given WMI device will consume significant CPU resources. + The WMI driver core will take care of enabling/disabling such + WMI devices. + +What: /sys/bus/wmi/devices/.../setable +Date: May 2017 +Contact: Darren Hart (VMware) <dvhart@infradead.org> +Description: + This file contains a boolean flags signaling the data block + aassociated with the given WMI device is writable. If the + given WMI device is not associated with a data block, then + this file will not exist. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index e7e160954e79..325873385b71 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -605,6 +605,18 @@ Description: Umwait control Note that a value of zero means there is no limit. Low order two bits must be zero. +What: /sys/devices/system/cpu/sev + /sys/devices/system/cpu/sev/vmpl +Date: May 2024 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: Secure Encrypted Virtualization (SEV) information + + This directory is only present when running as an SEV-SNP guest. + + vmpl: Reports the Virtual Machine Privilege Level (VMPL) at which + the SEV-SNP guest is running. + + What: /sys/devices/system/cpu/svm Date: August 2019 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> @@ -694,3 +706,9 @@ Description: (RO) indicates whether or not the kernel directly supports modifying the crash elfcorehdr for CPU hot un/plug and/or on/offline changes. + +What: /sys/devices/system/cpu/enabled +Date: Nov 2022 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: + (RO) the list of CPUs that can be brought online. diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat index 96020fb051c3..f290e77cd590 100644 --- a/Documentation/ABI/testing/sysfs-driver-qat +++ b/Documentation/ABI/testing/sysfs-driver-qat @@ -143,8 +143,8 @@ Description: This attribute is only available for qat_4xxx devices. What: /sys/bus/pci/devices/<BDF>/qat/auto_reset -Date: March 2024 -KernelVersion: 6.8 +Date: May 2024 +KernelVersion: 6.9 Contact: qat-linux@intel.com Description: (RW) Reports the current state of the autoreset feature for a QAT device diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 5bf7073b4f75..fe943ce76c60 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -920,14 +920,16 @@ Description: This file shows whether the configuration descriptor is locked. What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt What: /sys/bus/platform/devices/*.ufs/attributes/max_number_of_rtt -Date: February 2018 -Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> +Date: May 2024 +Contact: Avri Altman <avri.altman@wdc.com> Description: This file provides the maximum current number of - outstanding RTTs in device that is allowed. The full - information about the attribute could be found at - UFS specifications 2.1. + outstanding RTTs in device that is allowed. bMaxNumOfRTT is a + read-write persistent attribute and is equal to two after device + manufacturing. It shall not be set to a value greater than + bDeviceRTTCap value, and it may be set only when the hw queues are + empty. - The file is read only. + The file is read write. What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control What: /sys/bus/platform/devices/*.ufs/attributes/exception_event_control diff --git a/Documentation/ABI/testing/sysfs-fs-xfs b/Documentation/ABI/testing/sysfs-fs-xfs index f704925f6fe9..7da4de948b46 100644 --- a/Documentation/ABI/testing/sysfs-fs-xfs +++ b/Documentation/ABI/testing/sysfs-fs-xfs @@ -1,7 +1,7 @@ What: /sys/fs/xfs/<disk>/log/log_head_lsn Date: July 2014 KernelVersion: 3.17 -Contact: xfs@oss.sgi.com +Contact: linux-xfs@vger.kernel.org Description: The log sequence number (LSN) of the current head of the log. The LSN is exported in "cycle:basic block" format. @@ -10,30 +10,28 @@ Users: xfstests What: /sys/fs/xfs/<disk>/log/log_tail_lsn Date: July 2014 KernelVersion: 3.17 -Contact: xfs@oss.sgi.com +Contact: linux-xfs@vger.kernel.org Description: The log sequence number (LSN) of the current tail of the log. The LSN is exported in "cycle:basic block" format. -What: /sys/fs/xfs/<disk>/log/reserve_grant_head -Date: July 2014 -KernelVersion: 3.17 -Contact: xfs@oss.sgi.com +What: /sys/fs/xfs/<disk>/log/reserve_grant_head_bytes +Date: June 2024 +KernelVersion: 6.11 +Contact: linux-xfs@vger.kernel.org Description: The current state of the log reserve grant head. It represents the total log reservation of all currently - outstanding transactions. The grant head is exported in - "cycle:bytes" format. + outstanding transactions in bytes. Users: xfstests -What: /sys/fs/xfs/<disk>/log/write_grant_head -Date: July 2014 -KernelVersion: 3.17 -Contact: xfs@oss.sgi.com +What: /sys/fs/xfs/<disk>/log/write_grant_head_bytes +Date: June 2024 +KernelVersion: 6.11 +Contact: linux-xfs@vger.kernel.org Description: The current state of the log write grant head. It represents the total log reservation of all currently outstanding transactions, including regrants due to - rolling transactions. The grant head is exported in - "cycle:bytes" format. + rolling transactions in bytes. Users: xfstests diff --git a/Documentation/ABI/testing/sysfs-kernel-livepatch b/Documentation/ABI/testing/sysfs-kernel-livepatch index a5df9b4910dc..3735d868013d 100644 --- a/Documentation/ABI/testing/sysfs-kernel-livepatch +++ b/Documentation/ABI/testing/sysfs-kernel-livepatch @@ -47,6 +47,14 @@ Description: disabled when the feature is used. See Documentation/livepatch/livepatch.rst for more information. +What: /sys/kernel/livepatch/<patch>/replace +Date: Jun 2024 +KernelVersion: 6.11.0 +Contact: live-patching@vger.kernel.org +Description: + An attribute which indicates whether the patch supports + atomic-replace. + What: /sys/kernel/livepatch/<patch>/<object> Date: Nov 2014 KernelVersion: 3.19.0 diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon index cef6e1d20b18..f1b90cf1249b 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-damon +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -155,6 +155,12 @@ Contact: SeongJae Park <sj@kernel.org> Description: Writing to and reading from this file sets and gets the action of the scheme. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/target_nid +Date: Jun 2024 +Contact: SeongJae Park <sj@kernel.org> +Description: Action's target NUMA node id. Supported by only relevant + actions. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/apply_interval_us Date: Sep 2023 Contact: SeongJae Park <sj@kernel.org> diff --git a/Documentation/PCI/endpoint/pci-endpoint.rst b/Documentation/PCI/endpoint/pci-endpoint.rst index 4f5622a65555..21507e3cc238 100644 --- a/Documentation/PCI/endpoint/pci-endpoint.rst +++ b/Documentation/PCI/endpoint/pci-endpoint.rst @@ -172,8 +172,8 @@ by the PCI endpoint function driver. * bind: ops to perform when a EPC device has been bound to EPF device * unbind: ops to perform when a binding has been lost between a EPC device and EPF device - * linkup: ops to perform when the EPC device has established a - connection with a host system + * add_cfs: optional ops to create function specific configfs + attributes The PCI Function driver can then register the PCI EPF driver by using pci_epf_register_driver(). diff --git a/Documentation/PCI/pciebus-howto.rst b/Documentation/PCI/pciebus-howto.rst index a0027e8fb0d0..f344452651e1 100644 --- a/Documentation/PCI/pciebus-howto.rst +++ b/Documentation/PCI/pciebus-howto.rst @@ -139,7 +139,7 @@ driver data structure. static struct pcie_port_service_driver root_aerdrv = { .name = (char *)device_name, - .id_table = &service_id[0], + .id_table = service_id, .probe = aerdrv_load, .remove = aerdrv_unload, diff --git a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst index 5750f125361b..728b1e690c64 100644 --- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst +++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst @@ -149,9 +149,9 @@ This case is handled by calls to the strongly ordered ``atomic_add_return()`` read-modify-write atomic operation that is invoked within ``rcu_dynticks_eqs_enter()`` at idle-entry time and within ``rcu_dynticks_eqs_exit()`` at idle-exit time. -The grace-period kthread invokes ``rcu_dynticks_snap()`` and -``rcu_dynticks_in_eqs_since()`` (both of which invoke -an ``atomic_add_return()`` of zero) to detect idle CPUs. +The grace-period kthread invokes first ``ct_dynticks_cpu_acquire()`` +(preceded by a full memory barrier) and ``rcu_dynticks_in_eqs_since()`` +(both of which rely on acquire semantics) to detect idle CPUs. +-----------------------------------------------------------------------+ | **Quick Quiz**: | diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst index cccafdaa1f84..f511476b4550 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.rst +++ b/Documentation/RCU/Design/Requirements/Requirements.rst @@ -2357,6 +2357,7 @@ section. #. `Sched Flavor (Historical)`_ #. `Sleepable RCU`_ #. `Tasks RCU`_ +#. `Tasks Trace RCU`_ Bottom-Half Flavor (Historical) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -2610,6 +2611,16 @@ critical sections that are delimited by voluntary context switches, that is, calls to schedule(), cond_resched(), and synchronize_rcu_tasks(). In addition, transitions to and from userspace execution also delimit tasks-RCU read-side critical sections. +Idle tasks are ignored by Tasks RCU, and Tasks Rude RCU may be used to +interact with them. + +Note well that involuntary context switches are *not* Tasks-RCU quiescent +states. After all, in preemptible kernels, a task executing code in a +trampoline might be preempted. In this case, the Tasks-RCU grace period +clearly cannot end until that task resumes and its execution leaves that +trampoline. This means, among other things, that cond_resched() does +not provide a Tasks RCU quiescent state. (Instead, use rcu_softirq_qs() +from softirq or rcu_tasks_classic_qs() otherwise.) The tasks-RCU API is quite compact, consisting only of call_rcu_tasks(), synchronize_rcu_tasks(), and @@ -2632,6 +2643,11 @@ moniker. And this operation is considered to be quite rude by real-time workloads that don't want their ``nohz_full`` CPUs receiving IPIs and by battery-powered systems that don't want their idle CPUs to be awakened. +Once kernel entry/exit and deep-idle functions have been properly tagged +``noinstr``, Tasks RCU can start paying attention to idle tasks (except +those that are idle from RCU's perspective) and then Tasks Rude RCU can +be removed from the kernel. + The tasks-rude-RCU API is also reader-marking-free and thus quite compact, consisting of call_rcu_tasks_rude(), synchronize_rcu_tasks_rude(), and rcu_barrier_tasks_rude(). diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst index 94838c65c7d9..d585a5490aee 100644 --- a/Documentation/RCU/whatisRCU.rst +++ b/Documentation/RCU/whatisRCU.rst @@ -250,21 +250,25 @@ rcu_assign_pointer() ^^^^^^^^^^^^^^^^^^^^ void rcu_assign_pointer(p, typeof(p) v); - Yes, rcu_assign_pointer() **is** implemented as a macro, though it - would be cool to be able to declare a function in this manner. - (Compiler experts will no doubt disagree.) + Yes, rcu_assign_pointer() **is** implemented as a macro, though + it would be cool to be able to declare a function in this manner. + (And there has been some discussion of adding overloaded functions + to the C language, so who knows?) The updater uses this spatial macro to assign a new value to an RCU-protected pointer, in order to safely communicate the change in value from the updater to the reader. This is a spatial (as opposed to temporal) macro. It does not evaluate to an rvalue, - but it does execute any memory-barrier instructions required - for a given CPU architecture. Its ordering properties are that - of a store-release operation. - - Perhaps just as important, it serves to document (1) which - pointers are protected by RCU and (2) the point at which a - given structure becomes accessible to other CPUs. That said, + but it does provide any compiler directives and memory-barrier + instructions required for a given compile or CPU architecture. + Its ordering properties are that of a store-release operation, + that is, any prior loads and stores required to initialize the + structure are ordered before the store that publishes the pointer + to that structure. + + Perhaps just as important, rcu_assign_pointer() serves to document + (1) which pointers are protected by RCU and (2) the point at which + a given structure becomes accessible to other CPUs. That said, rcu_assign_pointer() is most frequently used indirectly, via the _rcu list-manipulation primitives such as list_add_rcu(). @@ -283,7 +287,11 @@ rcu_dereference() executes any needed memory-barrier instructions for a given CPU architecture. Currently, only Alpha needs memory barriers within rcu_dereference() -- on other CPUs, it compiles to a - volatile load. + volatile load. However, no mainstream C compilers respect + address dependencies, so rcu_dereference() uses volatile casts, + which, in combination with the coding guidelines listed in + rcu_dereference.rst, prevent current compilers from breaking + these dependencies. Common coding practice uses rcu_dereference() to copy an RCU-protected pointer to a local variable, then dereferences diff --git a/Documentation/admin-guide/cgroup-v1/pids.rst b/Documentation/admin-guide/cgroup-v1/pids.rst index 6acebd9e72c8..0f9f9a7b1f6c 100644 --- a/Documentation/admin-guide/cgroup-v1/pids.rst +++ b/Documentation/admin-guide/cgroup-v1/pids.rst @@ -36,7 +36,8 @@ superset of parent/child/pids.current. The pids.events file contains event counters: - - max: Number of times fork failed because limit was hit. + - max: Number of times fork failed in the cgroup because limit was hit in + self or ancestors. Example ------- diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 8fbb0519d556..86311c2907cd 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -239,6 +239,13 @@ cgroup v2 currently supports the following mount options. will not be tracked by the memory controller (even if cgroup v2 is remounted later on). + pids_localevents + The option restores v1-like behavior of pids.events:max, that is only + local (inside cgroup proper) fork failures are counted. Without this + option pids.events.max represents any pids.max enforcemnt across + cgroup's subtree. + + Organizing Processes and Threads -------------------------------- @@ -1299,17 +1306,10 @@ PAGE_SIZE multiple when read back. This is a simple interface to trigger memory reclaim in the target cgroup. - This file accepts a single key, the number of bytes to reclaim. - No nested keys are currently supported. - Example:: echo "1G" > memory.reclaim - The interface can be later extended with nested keys to - configure the reclaim behavior. For example, specify the - type of memory to reclaim from (anon, file, ..). - Please note that the kernel can over or under reclaim from the target cgroup. If less bytes are reclaimed than the specified amount, -EAGAIN is returned. @@ -1321,6 +1321,17 @@ PAGE_SIZE multiple when read back. This means that the networking layer will not adapt based on reclaim induced by memory.reclaim. +The following nested keys are defined. + + ========== ================================ + swappiness Swappiness value to reclaim with + ========== ================================ + + Specifying a swappiness value instructs the kernel to perform + the reclaim with that swappiness value. Note that this has the + same semantics as vm.swappiness applied to memcg reclaim with + all the existing limitations and potential future extensions. + memory.peak A read-only single value file which exists on non-root cgroups. @@ -2205,12 +2216,18 @@ PID Interface Files descendants has ever reached. pids.events - A read-only flat-keyed file which exists on non-root cgroups. The - following entries are defined. Unless specified otherwise, a value - change in this file generates a file modified event. + A read-only flat-keyed file which exists on non-root cgroups. Unless + specified otherwise, a value change in this file generates a file + modified event. The following entries are defined. max - Number of times fork failed because limit was hit. + The number of times the cgroup's total number of processes hit the pids.max + limit (see also pids_localevents). + + pids.events.local + Similar to pids.events but the fields in the file are local + to the cgroup i.e. not hierarchical. The file modified event + generated on this file reflects only the local events. Organisational operations are not blocked by cgroup policies, so it is possible to have pids.current > pids.max. This can be done by either @@ -2346,8 +2363,12 @@ Cpuset Interface Files is always a subset of it. Users can manually set it to a value that is different from - "cpuset.cpus". The only constraint in setting it is that the - list of CPUs must be exclusive with respect to its sibling. + "cpuset.cpus". One constraint in setting it is that the list of + CPUs must be exclusive with respect to "cpuset.cpus.exclusive" + of its sibling. If "cpuset.cpus.exclusive" of a sibling cgroup + isn't set, its "cpuset.cpus" value, if set, cannot be a subset + of it to leave at least one CPU available when the exclusive + CPUs are taken away. For a parent cgroup, any one of its exclusive CPUs can only be distributed to at most one of its child cgroups. Having an @@ -2363,8 +2384,8 @@ Cpuset Interface Files cpuset-enabled cgroups. This file shows the effective set of exclusive CPUs that - can be used to create a partition root. The content of this - file will always be a subset of "cpuset.cpus" and its parent's + can be used to create a partition root. The content + of this file will always be a subset of its parent's "cpuset.cpus.exclusive.effective" if its parent is not the root cgroup. It will also be a subset of "cpuset.cpus.exclusive" if it is set. If "cpuset.cpus.exclusive" is not set, it is @@ -2625,6 +2646,15 @@ Miscellaneous controller provides 3 interface files. If two misc resources (res_ res_a 3 res_b 0 + misc.peak + A read-only flat-keyed file shown in all cgroups. It shows the + historical maximum usage of the resources in the cgroup and its + children.:: + + $ cat misc.peak + res_a 10 + res_b 8 + misc.max A read-write flat-keyed file shown in the non root cgroups. Allowed maximum usage of the resources in the cgroup and its children.:: @@ -2654,6 +2684,11 @@ Miscellaneous controller provides 3 interface files. If two misc resources (res_ The number of times the cgroup's resource usage was about to go over the max boundary. + misc.events.local + Similar to misc.events but the fields in the file are local to the + cgroup i.e. not hierarchical. The file modified event generated on + this file reflects only the local events. + Migration and Ownership ~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst index aa8290a29dc8..fd4b56c0996f 100644 --- a/Documentation/admin-guide/cifs/usage.rst +++ b/Documentation/admin-guide/cifs/usage.rst @@ -723,40 +723,26 @@ Configuration pseudo-files: ======================= ======================================================= SecurityFlags Flags which control security negotiation and also packet signing. Authentication (may/must) - flags (e.g. for NTLM and/or NTLMv2) may be combined with + flags (e.g. for NTLMv2) may be combined with the signing flags. Specifying two different password hashing mechanisms (as "must use") on the other hand does not make much sense. Default flags are:: - 0x07007 - - (NTLM, NTLMv2 and packet signing allowed). The maximum - allowable flags if you want to allow mounts to servers - using weaker password hashes is 0x37037 (lanman, - plaintext, ntlm, ntlmv2, signing allowed). Some - SecurityFlags require the corresponding menuconfig - options to be enabled. Enabling plaintext - authentication currently requires also enabling - lanman authentication in the security flags - because the cifs module only supports sending - laintext passwords using the older lanman dialect - form of the session setup SMB. (e.g. for authentication - using plain text passwords, set the SecurityFlags - to 0x30030):: + 0x00C5 + + (NTLMv2 and packet signing allowed). Some SecurityFlags + may require enabling a corresponding menuconfig option. may use packet signing 0x00001 must use packet signing 0x01001 - may use NTLM (most common password hash) 0x00002 - must use NTLM 0x02002 may use NTLMv2 0x00004 must use NTLMv2 0x04004 - may use Kerberos security 0x00008 - must use Kerberos 0x08008 - may use lanman (weak) password hash 0x00010 - must use lanman password hash 0x10010 - may use plaintext passwords 0x00020 - must use plaintext passwords 0x20020 - (reserved for future packet encryption) 0x00040 + may use Kerberos security (krb5) 0x00008 + must use Kerberos 0x08008 + may use NTLMSSP 0x00080 + must use NTLMSSP 0x80080 + seal (packet encryption) 0x00040 + must seal (not implemented yet) 0x40040 cifsFYI If set to non-zero value, additional debug information will be logged to the system error log. This field diff --git a/Documentation/admin-guide/device-mapper/dm-crypt.rst b/Documentation/admin-guide/device-mapper/dm-crypt.rst index 41f5f57f00eb..e625830d335e 100644 --- a/Documentation/admin-guide/device-mapper/dm-crypt.rst +++ b/Documentation/admin-guide/device-mapper/dm-crypt.rst @@ -160,6 +160,17 @@ iv_large_sectors The <iv_offset> must be multiple of <sector_size> (in 512 bytes units) if this flag is specified. + +Module parameters:: +max_read_size +max_write_size + Maximum size of read or write requests. When a request larger than this size + is received, dm-crypt will split the request. The splitting improves + concurrency (the split requests could be encrypted in parallel by multiple + cores), but it also causes overhead. The user should tune these parameters to + fit the actual workload. + + Example scripts =============== LUKS (Linux Unified Key Setup) is now the preferred way to set up disk diff --git a/Documentation/admin-guide/device-mapper/vdo.rst b/Documentation/admin-guide/device-mapper/vdo.rst index 7e1ecafdf91e..c69ac186863a 100644 --- a/Documentation/admin-guide/device-mapper/vdo.rst +++ b/Documentation/admin-guide/device-mapper/vdo.rst @@ -241,6 +241,7 @@ Messages All vdo devices accept messages in the form: :: + dmsetup message <target-name> 0 <message-name> <message-parameters> The messages are: diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst index 0e9b48daf690..7c036590cd07 100644 --- a/Documentation/admin-guide/dynamic-debug-howto.rst +++ b/Documentation/admin-guide/dynamic-debug-howto.rst @@ -26,6 +26,11 @@ Dynamic debug provides: - format string - class name (as known/declared by each module) +NOTE: To actually get the debug-print output on the console, you may +need to adjust the kernel ``loglevel=``, or use ``ignore_loglevel``. +Read about these kernel parameters in +Documentation/admin-guide/kernel-parameters.rst. + Viewing Dynamic Debug Behaviour =============================== diff --git a/Documentation/admin-guide/gpio/gpio-virtuser.rst b/Documentation/admin-guide/gpio/gpio-virtuser.rst new file mode 100644 index 000000000000..2aca70db9f3b --- /dev/null +++ b/Documentation/admin-guide/gpio/gpio-virtuser.rst @@ -0,0 +1,177 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Virtual GPIO Consumer +===================== + +The virtual GPIO Consumer module allows users to instantiate virtual devices +that request GPIOs and then control their behavior over debugfs. Virtual +consumer devices can be instantiated from device-tree or over configfs. + +A virtual consumer uses the driver-facing GPIO APIs and allows to cover it with +automated tests driven by user-space. The GPIOs are requested using +``gpiod_get_array()`` and so we support multiple GPIOs per connector ID. + +Creating GPIO consumers +----------------------- + +The gpio-consumer module registers a configfs subsystem called +``'gpio-virtuser'``. For details of the configfs filesystem, please refer to +the configfs documentation. + +The user can create a hierarchy of configfs groups and items as well as modify +values of exposed attributes. Once the consumer is instantiated, this hierarchy +will be translated to appropriate device properties. The general structure is: + +**Group:** ``/config/gpio-virtuser`` + +This is the top directory of the gpio-consumer configfs tree. + +**Group:** ``/config/gpio-consumer/example-name`` + +**Attribute:** ``/config/gpio-consumer/example-name/live`` + +**Attribute:** ``/config/gpio-consumer/example-name/dev_name`` + +This is a directory representing a GPIO consumer device. + +The read-only ``dev_name`` attribute exposes the name of the device as it will +appear in the system on the platform bus. This is useful for locating the +associated debugfs directory under +``/sys/kernel/debug/gpio-virtuser/$dev_name``. + +The ``'live'`` attribute allows to trigger the actual creation of the device +once it's fully configured. The accepted values are: ``'1'`` to enable the +virtual device and ``'0'`` to disable and tear it down. + +Creating GPIO lookup tables +--------------------------- + +Users can create a number of configfs groups under the device group: + +**Group:** ``/config/gpio-consumer/example-name/con_id`` + +The ``'con_id'`` directory represents a single GPIO lookup and its value maps +to the ``'con_id'`` argument of the ``gpiod_get()`` function. For example: +``con_id`` == ``'reset'`` maps to the ``reset-gpios`` device property. + +Users can assign a number of GPIOs to each lookup. Each GPIO is a sub-directory +with a user-defined name under the ``'con_id'`` group. + +**Attribute:** ``/config/gpio-consumer/example-name/con_id/0/key`` + +**Attribute:** ``/config/gpio-consumer/example-name/con_id/0/offset`` + +**Attribute:** ``/config/gpio-consumer/example-name/con_id/0/drive`` + +**Attribute:** ``/config/gpio-consumer/example-name/con_id/0/pull`` + +**Attribute:** ``/config/gpio-consumer/example-name/con_id/0/active_low`` + +**Attribute:** ``/config/gpio-consumer/example-name/con_id/0/transitory`` + +This is a group describing a single GPIO in the ``con_id-gpios`` property. + +For virtual consumers created using configfs we use machine lookup tables so +this group can be considered as a mapping between the filesystem and the fields +of a single entry in ``'struct gpiod_lookup'``. + +The ``'key'`` attribute represents either the name of the chip this GPIO +belongs to or the GPIO line name. This depends on the value of the ``'offset'`` +attribute: if its value is >= 0, then ``'key'`` represents the label of the +chip to lookup while ``'offset'`` represents the offset of the line in that +chip. If ``'offset'`` is < 0, then ``'key'`` represents the name of the line. + +The remaining attributes map to the ``'flags'`` field of the GPIO lookup +struct. The first two take string values as arguments: + +**``'drive'``:** ``'push-pull'``, ``'open-drain'``, ``'open-source'`` +**``'pull'``:** ``'pull-up'``, ``'pull-down'``, ``'pull-disabled'``, ``'as-is'`` + +``'active_low'`` and ``'transitory'`` are boolean attributes. + +Activating GPIO consumers +------------------------- + +Once the confiuration is complete, the ``'live'`` attribute must be set to 1 in +order to instantiate the consumer. It can be set back to 0 to destroy the +virtual device. The module will synchronously wait for the new simulated device +to be successfully probed and if this doesn't happen, writing to ``'live'`` will +result in an error. + +Device-tree +----------- + +Virtual GPIO consumers can also be defined in device-tree. The compatible string +must be: ``"gpio-virtuser"`` with at least one property following the +standardized GPIO pattern. + +An example device-tree code defining a virtual GPIO consumer: + +.. code-block :: none + + gpio-virt-consumer { + compatible = "gpio-virtuser"; + + foo-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>, <&gpio1 2 0>; + bar-gpios = <&gpio0 6 0>; + }; + +Controlling virtual GPIO consumers +---------------------------------- + +Once active, the device will export debugfs attributes for controlling GPIO +arrays as well as each requested GPIO line separately. Let's consider the +following device property: ``foo-gpios = <&gpio0 0 0>, <&gpio0 4 0>;``. + +The following debugfs attribute groups will be created: + +**Group:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo/`` + +This is the group that will contain the attributes for the entire GPIO array. + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo/values`` + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo/values_atomic`` + +Both attributes allow to read and set arrays of GPIO values. User must pass +exactly the number of values that the array contains in the form of a string +containing zeroes and ones representing inactive and active GPIO states +respectively. In this example: ``echo 11 > values``. + +The ``values_atomic`` attribute works the same as ``values`` but the kernel +will execute the GPIO driver callbacks in interrupt context. + +**Group:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo:$index/`` + +This is a group that represents a single GPIO with ``$index`` being its offset +in the array. + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo:$index/consumer`` + +Allows to set and read the consumer label of the GPIO line. + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo:$index/debounce`` + +Allows to set and read the debounce period of the GPIO line. + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo:$index/direction`` + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo:$index/direction_atomic`` + +These two attributes allow to set the direction of the GPIO line. They accept +"input" and "output" as values. The atomic variant executes the driver callback +in interrupt context. + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo:$index/interrupts`` + +If the line is requested in input mode, writing ``1`` to this attribute will +make the module listen for edge interrupts on the GPIO. Writing ``0`` disables +the monitoring. Reading this attribute returns the current number of registered +interrupts (both edges). + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo:$index/value`` + +**Attribute:** ``/sys/kernel/debug/gpio-virtuser/$dev_name/gpiod:foo:$index/value_atomic`` + +Both attributes allow to read and set values of individual requested GPIO lines. +They accept the following values: ``1`` and ``0``. diff --git a/Documentation/admin-guide/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst index 460afd29617e..712f379731cb 100644 --- a/Documentation/admin-guide/gpio/index.rst +++ b/Documentation/admin-guide/gpio/index.rst @@ -10,6 +10,7 @@ GPIO Character Device Userspace API <../../userspace-api/gpio/chardev> gpio-aggregator gpio-sim + gpio-virtuser Obsolete APIs <obsolete> .. only:: subproject and html diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index 25a04cda4c2c..132e0bc6007e 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -592,85 +592,19 @@ Spectre variant 2 Mitigation control on the kernel command line --------------------------------------------- -Spectre variant 2 mitigation can be disabled or force enabled at the -kernel command line. +In general the kernel selects reasonable default mitigations for the +current CPU. - nospectre_v1 +Spectre default mitigations can be disabled or changed at the kernel +command line with the following options: - [X86,PPC] Disable mitigations for Spectre Variant 1 - (bounds check bypass). With this option data leaks are - possible in the system. + - nospectre_v1 + - nospectre_v2 + - spectre_v2={option} + - spectre_v2_user={option} + - spectre_bhi={option} - nospectre_v2 - - [X86] Disable all mitigations for the Spectre variant 2 - (indirect branch prediction) vulnerability. System may - allow data leaks with this option, which is equivalent - to spectre_v2=off. - - - spectre_v2= - - [X86] Control mitigation of Spectre variant 2 - (indirect branch speculation) vulnerability. - The default operation protects the kernel from - user space attacks. - - on - unconditionally enable, implies - spectre_v2_user=on - off - unconditionally disable, implies - spectre_v2_user=off - auto - kernel detects whether your CPU model is - vulnerable - - Selecting 'on' will, and 'auto' may, choose a - mitigation method at run time according to the - CPU, the available microcode, the setting of the - CONFIG_MITIGATION_RETPOLINE configuration option, - and the compiler with which the kernel was built. - - Selecting 'on' will also enable the mitigation - against user space to user space task attacks. - - Selecting 'off' will disable both the kernel and - the user space protections. - - Specific mitigations can also be selected manually: - - retpoline auto pick between generic,lfence - retpoline,generic Retpolines - retpoline,lfence LFENCE; indirect branch - retpoline,amd alias for retpoline,lfence - eibrs Enhanced/Auto IBRS - eibrs,retpoline Enhanced/Auto IBRS + Retpolines - eibrs,lfence Enhanced/Auto IBRS + LFENCE - ibrs use IBRS to protect kernel - - Not specifying this option is equivalent to - spectre_v2=auto. - - In general the kernel by default selects - reasonable mitigations for the current CPU. To - disable Spectre variant 2 mitigations, boot with - spectre_v2=off. Spectre variant 1 mitigations - cannot be disabled. - - spectre_bhi= - - [X86] Control mitigation of Branch History Injection - (BHI) vulnerability. This setting affects the deployment - of the HW BHI control and the SW BHB clearing sequence. - - on - (default) Enable the HW or SW mitigation as - needed. - off - Disable the mitigation. - -For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt +For more details on the available options, refer to Documentation/admin-guide/kernel-parameters.txt Mitigation selection guide -------------------------- diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst index 32ea52f1d150..e85b1adf5908 100644 --- a/Documentation/admin-guide/index.rst +++ b/Documentation/admin-guide/index.rst @@ -121,7 +121,6 @@ configure specific aspects of kernel behavior to your liking. parport perf-security pm/index - pmf pnp rapidio RAS/index diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst index e8bdf5e86a9b..fdea7c26ef80 100644 --- a/Documentation/admin-guide/kernel-parameters.rst +++ b/Documentation/admin-guide/kernel-parameters.rst @@ -118,7 +118,6 @@ is applicable:: HIBERNATION HIBERNATION is enabled. HW Appropriate hardware is enabled. HYPER_V HYPERV support is enabled. - IA-64 IA-64 architecture is enabled. IMA Integrity measurement architecture is enabled. IP_PNP IP DHCP, BOOTP, or RARP is enabled. IPV6 IPv6 support is enabled. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 27ec49af1bf2..09126bb8cc9f 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -12,7 +12,7 @@ acpi= [HW,ACPI,X86,ARM64,RISCV64,EARLY] Advanced Configuration and Power Interface Format: { force | on | off | strict | noirq | rsdt | - copy_dsdt } + copy_dsdt | nospcr } force -- enable ACPI if default was off on -- enable ACPI but allow fallback to DT [arm64,riscv64] off -- disable ACPI if default was on @@ -21,8 +21,12 @@ strictly ACPI specification compliant. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory - For ARM64 and RISCV64, ONLY "acpi=off", "acpi=on" or - "acpi=force" are available + nospcr -- disable console in ACPI SPCR table as + default _serial_ console on ARM64 + For ARM64, ONLY "acpi=off", "acpi=on", "acpi=force" or + "acpi=nospcr" are available + For RISCV64, ONLY "acpi=off", "acpi=on" or "acpi=force" + are available See also Documentation/power/runtime_pm.rst, pci=noacpi @@ -788,6 +792,25 @@ Documentation/networking/netconsole.rst for an alternative. + <DEVNAME>:<n>.<n>[,options] + Use the specified serial port on the serial core bus. + The addressing uses DEVNAME of the physical serial port + device, followed by the serial core controller instance, + and the serial port instance. The options are the same + as documented for the ttyS addressing above. + + The mapping of the serial ports to the tty instances + can be viewed with: + + $ ls -d /sys/bus/serial-base/devices/*:*.*/tty/* + /sys/bus/serial-base/devices/00:04:0.0/tty/ttyS0 + + In the above example, the console can be addressed with + console=00:04:0.0. Note that a console addressed this + way will only get added when the related device driver + is ready. The use of an earlycon parameter in addition to + the console may be desired for console output early on. + uart[8250],io,<addr>[,options] uart[8250],mmio,<addr>[,options] uart[8250],mmio16,<addr>[,options] @@ -1431,27 +1454,6 @@ you are really sure that your UEFI does sane gc and fulfills the spec otherwise your board may brick. - efi_fake_mem= nn[KMG]@ss[KMG]:aa[,nn[KMG]@ss[KMG]:aa,..] [EFI,X86,EARLY] - Add arbitrary attribute to specific memory range by - updating original EFI memory map. - Region of memory which aa attribute is added to is - from ss to ss+nn. - - If efi_fake_mem=2G@4G:0x10000,2G@0x10a0000000:0x10000 - is specified, EFI_MEMORY_MORE_RELIABLE(0x10000) - attribute is added to range 0x100000000-0x180000000 and - 0x10a0000000-0x1120000000. - - If efi_fake_mem=8G@9G:0x40000 is specified, the - EFI_MEMORY_SP(0x40000) attribute is added to - range 0x240000000-0x43fffffff. - - Using this parameter you can do debugging of EFI memmap - related features. For example, you can do debugging of - Address Range Mirroring feature even if your box - doesn't support it, or mark specific memory as - "soft reserved". - efivar_ssdt= [EFI; X86] Name of an EFI variable that contains an SSDT that is to be dynamically loaded by Linux. If there are multiple variables with the same name but with different @@ -1759,8 +1761,6 @@ for 64-bit NUMA, off otherwise. Format: 0 | 1 (for off | on) - hcl= [IA-64] SGI's Hardware Graph compatibility layer - hd= [EIDE] (E)IDE hard drive subsystem geometry Format: <cyl>,<head>,<sect> @@ -2003,7 +2003,7 @@ for the device. By default it is set to false (0). ieee754= [MIPS] Select IEEE Std 754 conformance mode - Format: { strict | legacy | 2008 | relaxed } + Format: { strict | legacy | 2008 | relaxed | emulated } Default: strict Choose which programs will be accepted for execution @@ -2023,6 +2023,8 @@ by the FPU relaxed accept any binaries regardless of whether supported by the FPU + emulated accept any binaries but enable FPU emulator + if binary mode is unsupported by the FPU. The FPU emulator is always able to support both NaN encodings, so if no FPU hardware is present or it has @@ -2519,7 +2521,7 @@ keepinitrd [HW,ARM] See retain_initrd. - kernelcore= [KNL,X86,IA-64,PPC,EARLY] + kernelcore= [KNL,X86,PPC,EARLY] Format: nn[KMGTPE] | nn% | "mirror" This parameter specifies the amount of memory usable by the kernel for non-movable allocations. The requested @@ -2720,6 +2722,24 @@ [KVM,ARM,EARLY] Allow use of GICv4 for direct injection of LPIs. + kvm-arm.wfe_trap_policy= + [KVM,ARM] Control when to set WFE instruction trap for + KVM VMs. Traps are allowed but not guaranteed by the + CPU architecture. + + trap: set WFE instruction trap + + notrap: clear WFE instruction trap + + kvm-arm.wfi_trap_policy= + [KVM,ARM] Control when to set WFI instruction trap for + KVM VMs. Traps are allowed but not guaranteed by the + CPU architecture. + + trap: set WFI instruction trap + + notrap: clear WFI instruction trap + kvm_cma_resv_ratio=n [PPC,EARLY] Reserves given percentage from system memory area for contiguous memory allocation for KVM hash pagetable @@ -3159,26 +3179,16 @@ unlikely, in the extreme case this might damage your hardware. - ltpc= [NET] - Format: <io>,<irq>,<dma> - lsm.debug [SECURITY] Enable LSM initialization debugging output. lsm=lsm1,...,lsmN [SECURITY] Choose order of LSM initialization. This overrides CONFIG_LSM, and the "security=" parameter. - machvec= [IA-64] Force the use of a particular machine-vector - (machvec) in a generic kernel. - Example: machvec=hpzx1 - machtype= [Loongson] Share the same kernel image file between different yeeloong laptops. Example: machtype=lemote-yeeloong-2f-7inch - max_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory greater - than or equal to this physical address is ignored. - maxcpus= [SMP,EARLY] Maximum number of processors that an SMP kernel will bring up during bootup. maxcpus=n : n >= 0 limits the kernel to bring up 'n' processors. Surely after @@ -3404,10 +3414,6 @@ deep - Suspend-To-RAM or equivalent (if supported) See Documentation/admin-guide/pm/sleep-states.rst. - mfgpt_irq= [IA-32] Specify the IRQ to use for the - Multi-Function General Purpose Timers on AMD Geode - platforms. - mfgptfix [X86-32] Fix MFGPT timers on AMD Geode platforms when the BIOS has incorrectly applied a workaround. TinyBIOS version 0.98 is known to be affected, 0.99 fixes the @@ -3420,9 +3426,6 @@ Enable or disable the microcode minimal revision enforcement for the runtime microcode loader. - min_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory below this - physical address is ignored. - mini2440= [ARM,HW,KNL] Format:[0..2][b][c][t] Default: "0tb" @@ -3587,7 +3590,7 @@ mousedev.yres= [MOUSE] Vertical screen resolution, used for devices reporting absolute coordinates, such as tablets - movablecore= [KNL,X86,IA-64,PPC,EARLY] + movablecore= [KNL,X86,PPC,EARLY] Format: nn[KMGTPE] | nn% This parameter is the complement to kernelcore=, it specifies the amount of memory used for migratable @@ -3613,11 +3616,6 @@ mtdparts= [MTD] See drivers/mtd/parsers/cmdlinepart.c - mtdset= [ARM] - ARM/S3C2412 JIVE boot control - - See arch/arm/mach-s3c/mach-jive.c - mtouchusb.raw_coordinates= [HW] Make the MicroTouch USB driver use raw coordinates ('y', default) or cooked coordinates ('n') @@ -3832,9 +3830,6 @@ noalign [KNL,ARM] - noaltinstr [S390,EARLY] Disables alternative instructions - patching (CPU alternatives feature). - noapic [SMP,APIC,EARLY] Tells the kernel to not make use of any IOAPICs that may be present in the system. @@ -3866,8 +3861,6 @@ no_entry_flush [PPC,EARLY] Don't flush the L1-D cache when entering the kernel. - noexec [IA-64] - noexec32 [X86-64] This affects only 32-bit executables. noexec32=on: enable non-executable mappings (default) @@ -3887,13 +3880,6 @@ register save and restore. The kernel will only save legacy floating-point registers on task switch. - nohalt [IA-64] Tells the kernel not to use the power saving - function PAL_HALT_LIGHT when idle. This increases - power-consumption. On the positive side, it reduces - interrupt wake-up latency, which may improve performance - in certain environments such as networked servers or - real-time systems. - no_hash_pointers [KNL,EARLY] Force pointers printed to the console or buffers to be @@ -3911,7 +3897,7 @@ nohibernate [HIBERNATION] Disable hibernation and resume. - nohlt [ARM,ARM64,MICROBLAZE,MIPS,PPC,SH] Forces the kernel to + nohlt [ARM,ARM64,MICROBLAZE,MIPS,PPC,RISCV,SH] Forces the kernel to busy wait in do_idle() and not use the arch_cpu_idle() implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP to be effective. This is useful on platforms where the @@ -3948,8 +3934,6 @@ remapping. [Deprecated - use intremap=off] - nointroute [IA-64] - noinvpcid [X86,EARLY] Disable the INVPCID cpu feature. noiotrap [SH] Disables trapped I/O port accesses. @@ -3959,8 +3943,6 @@ noisapnp [ISAPNP] Disables ISA PnP code. - nojitter [IA-64] Disables jitter checking for ITC timers. - nokaslr [KNL,EARLY] When CONFIG_RANDOMIZE_BASE is set, this disables kernel and module base offset ASLR (Address Space @@ -3975,8 +3957,6 @@ nolapic_timer [X86-32,APIC,EARLY] Do not use the local APIC timer. - nomca [IA-64] Disable machine check abort handling - nomce [X86-32] Disable Machine Check Exception nomfgpt [X86-32] Disable Multi-Function General Purpose @@ -4028,8 +4008,6 @@ noresume [SWSUSP] Disables resume and restores original swap space. - nosbagart [IA-64] - no-scroll [VGA] Disables scrollback. This is required for the Braillex ib80-piezo Braille reader made by F.H. Papenmeier (Germany). @@ -4073,9 +4051,9 @@ prediction) vulnerability. System may allow data leaks with this option. - no-steal-acc [X86,PV_OPS,ARM64,PPC/PSERIES,RISCV,EARLY] Disable - paravirtualized steal time accounting. steal time is - computed, but won't influence scheduler behaviour + no-steal-acc [X86,PV_OPS,ARM64,PPC/PSERIES,RISCV,LOONGARCH,EARLY] + Disable paravirtualized steal time accounting. steal time + is computed, but won't influence scheduler behaviour nosync [HW,M68K] Disables sync negotiation for all devices. @@ -4130,19 +4108,6 @@ parameter, xsave area per process might occupy more memory on xsaves enabled systems. - nps_mtm_hs_ctr= [KNL,ARC] - This parameter sets the maximum duration, in - cycles, each HW thread of the CTOP can run - without interruptions, before HW switches it. - The actual maximum duration is 16 times this - parameter's value. - Format: integer between 1 and 255 - Default: 255 - - nptcg= [IA-64] Override max number of concurrent global TLB - purges which is reported from either PAL_VM_SUMMARY or - SAL PALO. - nr_cpus= [SMP,EARLY] Maximum number of processors that an SMP kernel could support. nr_cpus=n : n >= 1 limits the kernel to support 'n' processors. It could be larger than the @@ -4616,6 +4581,38 @@ bridges without forcing it upstream. Note: this removes isolation between devices and may put more devices in an IOMMU group. + config_acs= + Format: + <ACS flags>@<pci_dev>[; ...] + Specify one or more PCI devices (in the format + specified above) optionally prepended with flags + and separated by semicolons. The respective + capabilities will be enabled, disabled or + unchanged based on what is specified in + flags. + + ACS Flags is defined as follows: + bit-0 : ACS Source Validation + bit-1 : ACS Translation Blocking + bit-2 : ACS P2P Request Redirect + bit-3 : ACS P2P Completion Redirect + bit-4 : ACS Upstream Forwarding + bit-5 : ACS P2P Egress Control + bit-6 : ACS Direct Translated P2P + Each bit can be marked as: + '0' – force disabled + '1' – force enabled + 'x' – unchanged + For example, + pci=config_acs=10x + would configure all devices that support + ACS to enable P2P Request Redirect, disable + Translation Blocking, and leave Source + Validation unchanged from whatever power-up + or firmware set it to. + + Note: this may remove isolation between devices + and may put more devices in an IOMMU group. force_floating [S390] Force usage of floating interrupts. nomio [S390] Do not use MIO instructions. norid [S390] ignore the RID field and force use of @@ -4749,7 +4746,9 @@ none - Limited to cond_resched() calls voluntary - Limited to cond_resched() and might_sleep() calls full - Any section that isn't explicitly preempt disabled - can be preempted anytime. + can be preempted anytime. Tasks will also yield + contended spinlocks (if the critical section isn't + explicitly preempt disabled beyond the lock itself). print-fatal-signals= [KNL] debug: print fatal signals @@ -4799,11 +4798,9 @@ profile= [KNL] Enable kernel profiling via /proc/profile Format: [<profiletype>,]<number> - Param: <profiletype>: "schedule", "sleep", or "kvm" + Param: <profiletype>: "schedule" or "kvm" [defaults to kernel profiling] Param: "schedule" - profile schedule points. - Param: "sleep" - profile D-state sleeping (millisecs). - Requires CONFIG_SCHEDSTATS Param: "kvm" - profile VM exits. Param: <number> - step/bucket size as a power of 2 for statistical time based profiling. @@ -5015,6 +5012,14 @@ the ->nocb_bypass queue. The definition of "too many" is supplied by this kernel boot parameter. + rcutree.nohz_full_patience_delay= [KNL] + On callback-offloaded (rcu_nocbs) CPUs, avoid + disturbing RCU unless the grace period has + reached the specified age in milliseconds. + Defaults to zero. Large values will be capped + at five seconds. All values will be rounded down + to the nearest value representable by jiffies. + rcutree.qhimark= [KNL] Set threshold of queued RCU callbacks beyond which batch limiting is disabled. @@ -5685,6 +5690,28 @@ them. If <base> is less than 0x10000, the region is assumed to be I/O ports; otherwise it is memory. + reserve_mem= [RAM] + Format: nn[KNG]:<align>:<label> + Reserve physical memory and label it with a name that + other subsystems can use to access it. This is typically + used for systems that do not wipe the RAM, and this command + line will try to reserve the same physical memory on + soft reboots. Note, it is not guaranteed to be the same + location. For example, if anything about the system changes + or if booting a different kernel. It can also fail if KASLR + places the kernel at the location of where the RAM reservation + was from a previous boot, the new reservation will be at a + different location. + Any subsystem using this feature must add a way to verify + that the contents of the physical memory is from a previous + boot, as there may be cases where the memory will not be + located at the same location. + + The format is size:align:label for example, to request + 12 megabytes of 4096 alignment for ramoops: + + reserve_mem=12M:4096:oops ramoops.mem_name=oops + reservetop= [X86-32,EARLY] Format: nn[KMG] Reserves a hole at the top of the kernel virtual @@ -5763,9 +5790,6 @@ 2 The "airplane mode" button toggles between everything blocked and everything unblocked. - rhash_entries= [KNL,NET] - Set number of hash buckets for route cache - ring3mwait=disable [KNL] Disable ring 3 MONITOR/MWAIT feature on supported CPUs. @@ -5999,9 +6023,6 @@ apic=verbose is specified. Example: apic=debug show_lapic=all - simeth= [IA-64] - simscsi= - slab_debug[=options[,slabs][;[options[,slabs]]...] [MM] Enabling slab_debug allows one to determine the culprit if slab objects become corrupted. Enabling @@ -6117,9 +6138,15 @@ deployment of the HW BHI control and the SW BHB clearing sequence. - on - (default) Enable the HW or SW mitigation - as needed. - off - Disable the mitigation. + on - (default) Enable the HW or SW mitigation as + needed. This protects the kernel from + both syscalls and VMs. + vmexit - On systems which don't have the HW mitigation + available, enable the SW mitigation on vmexit + ONLY. On such systems, the host kernel is + protected from VM-originated BHI attacks, but + may still be vulnerable to syscall attacks. + off - Disable the mitigation. spectre_v2= [X86,EARLY] Control mitigation of Spectre variant 2 (indirect branch speculation) vulnerability. @@ -6263,11 +6290,6 @@ Not specifying this option is equivalent to spec_store_bypass_disable=auto. - spia_io_base= [HW,MTD] - spia_fio_base= - spia_pedr= - spia_peddr= - split_lock_detect= [X86] Enable split lock detection or bus lock detection @@ -6523,7 +6545,7 @@ This parameter controls use of the Protected Execution Facility on pSeries. - swiotlb= [ARM,IA-64,PPC,MIPS,X86,EARLY] + swiotlb= [ARM,PPC,MIPS,X86,S390,EARLY] Format: { <int> [,<int>] | force | noforce } <int> -- Number of I/O TLB slabs <int> -- Second integer after comma. Number of swiotlb @@ -6604,12 +6626,6 @@ e.g. base its process migration decisions on it. Default is on. - topology_updates= [KNL, PPC, NUMA] - Format: {off} - Specify if the kernel should ignore (off) - topology updates sent by the hypervisor to this - LPAR. - torture.disable_onoff_at_boot= [KNL] Prevent the CPU-hotplug component of torturing until after init has spawned. @@ -6629,8 +6645,6 @@ torture.verbose_sleep_duration= [KNL] Duration of each verbose-printk() sleep in jiffies. - tp720= [HW,PS2] - tpm_suspend_pcr=[HW,TPM] Format: integer pcr id Specify that at suspend time, the tpm driver @@ -7074,6 +7088,9 @@ usb-storage.delay_use= [UMS] The delay in seconds before a new device is scanned for Logical Units (default 1). + Optionally the delay in milliseconds if the value has + suffix with "ms". + Example: delay_use=2567ms usb-storage.quirks= [UMS] A list of quirks entries to supplement or @@ -7167,9 +7184,6 @@ Try vdso32=0 if you encounter an error that says: dl_main: Assertion `(void *) ph->p_vaddr == _rtld_local._dl_sysinfo_dso' failed! - vector= [IA-64,SMP] - vector=percpu: enable percpu vector domain - video= [FB,EARLY] Frame buffer configuration See Documentation/fb/modedb.rst. @@ -7220,9 +7234,12 @@ vmalloc=nn[KMG] [KNL,BOOT,EARLY] Forces the vmalloc area to have an exact size of <nn>. This can be used to increase - the minimum size (128MB on x86). It can also be - used to decrease the size and leave more room - for directly mapped kernel RAM. + the minimum size (128MB on x86, arm32 platforms). + It can also be used to decrease the size and leave more room + for directly mapped kernel RAM. Note that this parameter does + not exist on many other platforms (including arm64, alpha, + loongarch, arc, csky, hexagon, microblaze, mips, nios2, openrisc, + parisc, m64k, powerpc, riscv, sh, um, xtensa, s390, sparc). vmcp_cma=nn[MG] [KNL,S390,EARLY] Sets the memory size reserved for contiguous memory @@ -7427,17 +7444,18 @@ Crash from Xen panic notifier, without executing late panic() code such as dumping handler. + xen_mc_debug [X86,XEN,EARLY] + Enable multicall debugging when running as a Xen PV guest. + Enabling this feature will reduce performance a little + bit, so it should only be enabled for obtaining extended + debug data in case of multicall errors. + xen_msr_safe= [X86,XEN,EARLY] Format: <bool> Select whether to always use non-faulting (safe) MSR access functions when running as Xen PV guest. The default value is controlled by CONFIG_XEN_PV_MSR_SAFE. - xen_nopvspin [X86,XEN,EARLY] - Disables the qspinlock slowpath using Xen PV optimizations. - This parameter is obsoleted by "nopvspin" parameter, which - has equivalent effect for XEN platform. - xen_nopv [X86] Disables the PV optimizations forcing the HVM guest to run as generic HVM guest with no PV drivers. diff --git a/Documentation/admin-guide/media/em28xx-cardlist.rst b/Documentation/admin-guide/media/em28xx-cardlist.rst index ace65718ea22..7dac07986d91 100644 --- a/Documentation/admin-guide/media/em28xx-cardlist.rst +++ b/Documentation/admin-guide/media/em28xx-cardlist.rst @@ -438,3 +438,11 @@ EM28xx cards list - MyGica iGrabber - em2860 - 1f4d:1abe + * - 106 + - Hauppauge USB QuadHD ATSC + - em28274 + - 2040:846d + * - 107 + - MyGica UTV3 Analog USB2.0 TV Box + - em2860 + - eb1a:2860 diff --git a/Documentation/admin-guide/media/ipu6-isys.rst b/Documentation/admin-guide/media/ipu6-isys.rst index 0721e920b5e6..d05086824a74 100644 --- a/Documentation/admin-guide/media/ipu6-isys.rst +++ b/Documentation/admin-guide/media/ipu6-isys.rst @@ -135,16 +135,16 @@ sensor ov2740 on Lenovo X1 Yoga laptop. .. code-block:: none media-ctl -l "\"ov2740 14-0036\":0 -> \"Intel IPU6 CSI2 1\":0[1]" - media-ctl -l "\"Intel IPU6 CSI2 1\":1 -> \"Intel IPU6 ISYS Capture 0\":0[5]" - media-ctl -l "\"Intel IPU6 CSI2 1\":2 -> \"Intel IPU6 ISYS Capture 1\":0[5]" + media-ctl -l "\"Intel IPU6 CSI2 1\":1 -> \"Intel IPU6 ISYS Capture 0\":0[1]" + media-ctl -l "\"Intel IPU6 CSI2 1\":2 -> \"Intel IPU6 ISYS Capture 1\":0[1]" # set routing - media-ctl -v -R "\"Intel IPU6 CSI2 1\" [0/0->1/0[1],0/1->2/1[1]]" + media-ctl -R "\"Intel IPU6 CSI2 1\" [0/0->1/0[1],0/1->2/1[1]]" - media-ctl -v "\"Intel IPU6 CSI2 1\":0/0 [fmt:SGRBG10/1932x1092]" - media-ctl -v "\"Intel IPU6 CSI2 1\":0/1 [fmt:GENERIC_8/97x1]" - media-ctl -v "\"Intel IPU6 CSI2 1\":1/0 [fmt:SGRBG10/1932x1092]" - media-ctl -v "\"Intel IPU6 CSI2 1\":2/1 [fmt:GENERIC_8/97x1]" + media-ctl -V "\"Intel IPU6 CSI2 1\":0/0 [fmt:SGRBG10/1932x1092]" + media-ctl -V "\"Intel IPU6 CSI2 1\":0/1 [fmt:GENERIC_8/97x1]" + media-ctl -V "\"Intel IPU6 CSI2 1\":1/0 [fmt:SGRBG10/1932x1092]" + media-ctl -V "\"Intel IPU6 CSI2 1\":2/1 [fmt:GENERIC_8/97x1]" CAPTURE_DEV=$(media-ctl -e "Intel IPU6 ISYS Capture 0") ./yavta --data-prefix -c100 -n5 -I -s1932x1092 --file=/tmp/frame-#.bin \ diff --git a/Documentation/admin-guide/media/raspberrypi-pisp-be.dot b/Documentation/admin-guide/media/raspberrypi-pisp-be.dot new file mode 100644 index 000000000000..55671dc1d443 --- /dev/null +++ b/Documentation/admin-guide/media/raspberrypi-pisp-be.dot @@ -0,0 +1,20 @@ +digraph board { + rankdir=TB + n00000001 [label="{{<port0> 0 | <port1> 1 | <port2> 2 | <port7> 7} | pispbe\n | {<port3> 3 | <port4> 4 | <port5> 5 | <port6> 6}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port3 -> n0000001c [style=bold] + n00000001:port4 -> n00000022 [style=bold] + n00000001:port5 -> n00000028 [style=bold] + n00000001:port6 -> n0000002e [style=bold] + n0000000a [label="pispbe-input\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000000a -> n00000001:port0 [style=bold] + n00000010 [label="pispbe-tdn_input\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000010 -> n00000001:port1 [style=bold] + n00000016 [label="pispbe-stitch_input\n/dev/video2", shape=box, style=filled, fillcolor=yellow] + n00000016 -> n00000001:port2 [style=bold] + n0000001c [label="pispbe-output0\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000022 [label="pispbe-output1\n/dev/video4", shape=box, style=filled, fillcolor=yellow] + n00000028 [label="pispbe-tdn_output\n/dev/video5", shape=box, style=filled, fillcolor=yellow] + n0000002e [label="pispbe-stitch_output\n/dev/video6", shape=box, style=filled, fillcolor=yellow] + n00000034 [label="pispbe-config\n/dev/video7", shape=box, style=filled, fillcolor=yellow] + n00000034 -> n00000001:port7 [style=bold] +} diff --git a/Documentation/admin-guide/media/raspberrypi-pisp-be.rst b/Documentation/admin-guide/media/raspberrypi-pisp-be.rst new file mode 100644 index 000000000000..0fcf46f26276 --- /dev/null +++ b/Documentation/admin-guide/media/raspberrypi-pisp-be.rst @@ -0,0 +1,109 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================================= +Raspberry Pi PiSP Back End Memory-to-Memory ISP (pisp-be) +========================================================= + +The PiSP Back End +================= + +The PiSP Back End is a memory-to-memory Image Signal Processor (ISP) which reads +image data from DRAM memory and performs image processing as specified by the +application through the parameters in a configuration buffer, before writing +pixel data back to memory through two distinct output channels. + +The ISP registers and programming model are documented in the `Raspberry Pi +Image Signal Processor (PiSP) Specification document`_ + +The PiSP Back End ISP processes images in tiles. The handling of image +tessellation and the computation of low-level configuration parameters is +realized by a free software library called `libpisp +<https://github.com/raspberrypi/libpisp>`_. + +The full image processing pipeline, which involves capturing RAW Bayer data from +an image sensor through a MIPI CSI-2 compatible capture interface, storing them +in DRAM memory and processing them in the PiSP Back End to obtain images usable +by an application is implemented in `libcamera <https://libcamera.org>`_ as +part of the Raspberry Pi platform support. + +The pisp-be driver +================== + +The Raspberry Pi PiSP Back End (pisp-be) driver is located under +drivers/media/platform/raspberrypi/pisp-be. It uses the `V4L2 API` to register +a number of video capture and output devices, the `V4L2 subdev API` to register +a subdevice for the ISP that connects the video devices in a single media graph +realized using the `Media Controller (MC) API`. + +The media topology registered by the `pisp-be` driver is represented below: + +.. _pips-be-topology: + +.. kernel-figure:: raspberrypi-pisp-be.dot + :alt: Diagram of the default media pipeline topology + :align: center + + +The media graph registers the following video device nodes: + +- pispbe-input: output device for images to be submitted to the ISP for + processing. +- pispbe-tdn_input: output device for temporal denoise. +- pispbe-stitch_input: output device for image stitching (HDR). +- pispbe-output0: first capture device for processed images. +- pispbe-output1: second capture device for processed images. +- pispbe-tdn_output: capture device for temporal denoise. +- pispbe-stitch_output: capture device for image stitching (HDR). +- pispbe-config: output device for ISP configuration parameters. + +pispbe-input +------------ + +Images to be processed by the ISP are queued to the `pispbe-input` output device +node. For a list of image formats supported as input to the ISP refer to the +`Raspberry Pi Image Signal Processor (PiSP) Specification document`_. + +pispbe-tdn_input, pispbe-tdn_output +----------------------------------- + +The `pispbe-tdn_input` output video device receives images to be processed by +the temporal denoise block which are captured from the `pispbe-tdn_output` +capture video device. Userspace is responsible for maintaining queues on both +devices, and ensuring that buffers completed on the output are queued to the +input. + +pispbe-stitch_input, pispbe-stitch_output +----------------------------------------- + +To realize HDR (high dynamic range) image processing the image stitching and +tonemapping blocks are used. The `pispbe-stitch_output` writes images to memory +and the `pispbe-stitch_input` receives the previously written frame to process +it along with the current input image. Userspace is responsible for maintaining +queues on both devices, and ensuring that buffers completed on the output are +queued to the input. + +pispbe-output0, pispbe-output1 +------------------------------ + +The two capture devices write to memory the pixel data as processed by the ISP. + +pispbe-config +------------- + +The `pispbe-config` output video devices receives a buffer of configuration +parameters that define the desired image processing to be performed by the ISP. + +The format of the ISP configuration parameter is defined by +:c:type:`pisp_be_tiles_config` C structure and the meaning of each parameter is +described in the `Raspberry Pi Image Signal Processor (PiSP) Specification +document`_. + +ISP configuration +================= + +The ISP configuration is described solely by the content of the parameters +buffer. The only parameter that userspace needs to configure using the V4L2 API +is the image format on the output and capture video devices for validation of +the content of the parameters buffer. + +.. _Raspberry Pi Image Signal Processor (PiSP) Specification document: https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf diff --git a/Documentation/admin-guide/media/tuner-cardlist.rst b/Documentation/admin-guide/media/tuner-cardlist.rst index 362617c59c5d..65ecf48ddf24 100644 --- a/Documentation/admin-guide/media/tuner-cardlist.rst +++ b/Documentation/admin-guide/media/tuner-cardlist.rst @@ -97,4 +97,6 @@ Tuner number Card name 89 Sony BTF-PG472Z PAL/SECAM 90 Sony BTF-PK467Z NTSC-M-JP 91 Sony BTF-PB463Z NTSC-M +92 Silicon Labs Si2157 tuner +93 Tena TNF931D-DFDR1 ============ ===================================================== diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst index 4120eded9a13..b6af448b9fe9 100644 --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -23,6 +23,7 @@ Video4Linux (V4L) driver-specific documentation omap4_camera philips qcom_camss + raspberrypi-pisp-be rcar-fdp1 rkisp1 saa7134 diff --git a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst index b6f658c0997e..1306f19ecb5a 100644 --- a/Documentation/admin-guide/media/vivid.rst +++ b/Documentation/admin-guide/media/vivid.rst @@ -302,6 +302,15 @@ all configurable using the following module options: - 0: forbid hints - 1: allow hints +- supports_requests: + + specifies if the device should support the Request API. There are + three possible values, default is 1: + + - 0: no request + - 1: supports requests + - 2: requires requests + Taken together, all these module options allow you to precisely customize the driver behavior and test your application with all sorts of permutations. It is also very suitable to emulate hardware that is not yet available, e.g. @@ -313,10 +322,10 @@ Video Capture This is probably the most frequently used feature. The video capture device can be configured by using the module options num_inputs, input_types and -ccs_cap_mode (see section 1 for more detailed information), but by default -four inputs are configured: a webcam, a TV tuner, an S-Video and an HDMI -input, one input for each input type. Those are described in more detail -below. +ccs_cap_mode (see "Configuring the driver" for more detailed information), +but by default four inputs are configured: a webcam, a TV tuner, an S-Video +and an HDMI input, one input for each input type. Those are described in more +detail below. Special attention has been given to the rate at which new frames become available. The jitter will be around 1 jiffie (that depends on the HZ @@ -434,10 +443,10 @@ Video Output ------------ The video output device can be configured by using the module options -num_outputs, output_types and ccs_out_mode (see section 1 for more detailed -information), but by default two outputs are configured: an S-Video and an -HDMI input, one output for each output type. Those are described in more detail -below. +num_outputs, output_types and ccs_out_mode (see "Configuring the driver" +for more detailed information), but by default two outputs are configured: +an S-Video and an HDMI input, one output for each output type. Those are +described in more detail below. Like with video capture the framerate is also exact in the long term. @@ -1011,11 +1020,6 @@ Digital Video Controls affects the reported colorspace since DVI_D outputs will always use sRGB. -- Display Present: - - sets the presence of a "display" on the HDMI output. This affects - the tx_edid_present, tx_hotplug and tx_rxsense controls. - FM Radio Receiver Controls ~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1130,35 +1134,34 @@ Metadata Capture Controls if set, then the generated metadata stream contains Source Clock information. -Video, VBI and RDS Looping --------------------------- -The vivid driver supports looping of video output to video input, VBI output -to VBI input and RDS output to RDS input. For video/VBI looping this emulates -as if a cable was hooked up between the output and input connector. So video -and VBI looping is only supported between S-Video and HDMI inputs and outputs. -VBI is only valid for S-Video as it makes no sense for HDMI. +Video, Sliced VBI and HDMI CEC Looping +-------------------------------------- -Since radio is wireless this looping always happens if the radio receiver -frequency is close to the radio transmitter frequency. In that case the radio -transmitter will 'override' the emulated radio stations. - -Looping is currently supported only between devices created by the same -vivid driver instance. +Video Looping functionality is supported for devices created by the same +vivid driver instance, as well as across multiple instances of the vivid driver. +The vivid driver supports looping of video and Sliced VBI data between an S-Video output +and an S-Video input. It also supports looping of video and HDMI CEC data between an +HDMI output and an HDMI input. +To enable looping, set the 'HDMI/S-Video XXX-N Is Connected To' control(s) to select +whether an input uses the Test Pattern Generator, or is disconnected, or is connected +to an output. An input can be connected to an output from any vivid instance. +The inputs and outputs are numbered XXX-N where XXX is the vivid instance number +(see module option n_devs). If there is only one vivid instance (the default), then +XXX will be 000. And N is the Nth S-Video/HDMI input or output of that instance. +If vivid is loaded without module options, then you can connect the S-Video 000-0 input +to the S-Video 000-0 output, or the HDMI 000-0 input to the HDMI 000-0 output. +This is the equivalent of connecting or disconnecting a cable between an input and an +output in a physical device. -Video and Sliced VBI looping -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +If an 'HDMI/S-Video XXX-N Is Connected To' control selected an output, then the video +output will be looped to the video input provided that: -The way to enable video/VBI looping is currently fairly crude. A 'Loop Video' -control is available in the "Vivid" control class of the video -capture and VBI capture devices. When checked the video looping will be enabled. -Once enabled any video S-Video or HDMI input will show a static test pattern -until the video output has started. At that time the video output will be -looped to the video input provided that: +- the currently selected input matches the input indicated by the control name. -- the input type matches the output type. So the HDMI input cannot receive - video from the S-Video output. +- in the vivid instance of the output connector, the currently selected output matches + the output indicated by the control's value. - the video resolution of the video input must match that of the video output. So it is not possible to loop a 50 Hz (720x576) S-Video output to a 60 Hz @@ -1185,6 +1188,8 @@ looped to the video input provided that: "DV Timings Signal Mode" for the HDMI input should be configured so that a valid signal is passed to the video input. +If any condition is not valid, then the 'Noise' test pattern is shown. + The framerates do not have to match, although this might change in the future. By default you will see the OSD text superimposed on top of the looped video. @@ -1198,17 +1203,26 @@ and WSS (50 Hz formats) VBI data is looped. Teletext VBI data is not looped. Radio & RDS Looping -~~~~~~~~~~~~~~~~~~~ - -As mentioned in section 6 the radio receiver emulates stations are regular -frequency intervals. Depending on the frequency of the radio receiver a -signal strength value is calculated (this is returned by VIDIOC_G_TUNER). -However, it will also look at the frequency set by the radio transmitter and -if that results in a higher signal strength than the settings of the radio -transmitter will be used as if it was a valid station. This also includes -the RDS data (if any) that the transmitter 'transmits'. This is received -faithfully on the receiver side. Note that when the driver is loaded the -frequencies of the radio receiver and transmitter are not identical, so +------------------- + +The vivid driver supports looping of RDS output to RDS input. + +Since radio is wireless this looping always happens if the radio receiver +frequency is close to the radio transmitter frequency. In that case the radio +transmitter will 'override' the emulated radio stations. + +RDS looping is currently supported only between devices created by the same +vivid driver instance. + +As mentioned in the "Radio Receiver" section, the radio receiver emulates +stations at regular frequency intervals. Depending on the frequency of the +radio receiver a signal strength value is calculated (this is returned by +VIDIOC_G_TUNER). However, it will also look at the frequency set by the radio +transmitter and if that results in a higher signal strength than the settings +of the radio transmitter will be used as if it was a valid station. This also +includes the RDS data (if any) that the transmitter 'transmits'. This is +received faithfully on the receiver side. Note that when the driver is loaded +the frequencies of the radio receiver and transmitter are not identical, so initially no looping takes place. @@ -1218,8 +1232,8 @@ Cropping, Composing, Scaling This driver supports cropping, composing and scaling in any combination. Normally which features are supported can be selected through the Vivid controls, but it is also possible to hardcode it when the module is loaded through the -ccs_cap_mode and ccs_out_mode module options. See section 1 on the details of -these module options. +ccs_cap_mode and ccs_out_mode module options. See "Configuring the driver" on +the details of these module options. This allows you to test your application for all these variations. @@ -1260,7 +1274,8 @@ is set, then the alpha component is only used for the color red and set to The driver has to be configured to support the multiplanar formats. By default the driver instances are single-planar. This can be changed by setting the -multiplanar module option, see section 1 for more details on that option. +multiplanar module option, see "Configuring the driver" for more details on that +option. If the driver instance is using the multiplanar formats/API, then the first single planar format (YUYV) and the multiplanar NV16M and NV61M formats the @@ -1270,74 +1285,6 @@ data_offset to be non-zero, so this is a useful feature for testing applications Video output will also honor any data_offset that the application set. -Capture Overlay ---------------- - -Note: capture overlay support is implemented primarily to test the existing -V4L2 capture overlay API. In practice few if any GPUs support such overlays -anymore, and neither are they generally needed anymore since modern hardware -is so much more capable. By setting flag 0x10000 in the node_types module -option the vivid driver will create a simple framebuffer device that can be -used for testing this API. Whether this API should be used for new drivers is -questionable. - -This driver has support for a destructive capture overlay with bitmap clipping -and list clipping (up to 16 rectangles) capabilities. Overlays are not -supported for multiplanar formats. It also honors the struct v4l2_window field -setting: if it is set to FIELD_TOP or FIELD_BOTTOM and the capture setting is -FIELD_ALTERNATE, then only the top or bottom fields will be copied to the overlay. - -The overlay only works if you are also capturing at that same time. This is a -vivid limitation since it copies from a buffer to the overlay instead of -filling the overlay directly. And if you are not capturing, then no buffers -are available to fill. - -In addition, the pixelformat of the capture format and that of the framebuffer -must be the same for the overlay to work. Otherwise VIDIOC_OVERLAY will return -an error. - -In order to really see what it going on you will need to create two vivid -instances: the first with a framebuffer enabled. You configure the capture -overlay of the second instance to use the framebuffer of the first, then -you start capturing in the second instance. For the first instance you setup -the output overlay for the video output, turn on video looping and capture -to see the blended framebuffer overlay that's being written to by the second -instance. This setup would require the following commands: - -.. code-block:: none - - $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 - $ v4l2-ctl -d1 --find-fb - /dev/fb1 is the framebuffer associated with base address 0x12800000 - $ sudo v4l2-ctl -d2 --set-fbuf fb=1 - $ v4l2-ctl -d1 --set-fbuf fb=1 - $ v4l2-ctl -d0 --set-fmt-video=pixelformat='AR15' - $ v4l2-ctl -d1 --set-fmt-video-out=pixelformat='AR15' - $ v4l2-ctl -d2 --set-fmt-video=pixelformat='AR15' - $ v4l2-ctl -d0 -i2 - $ v4l2-ctl -d2 -i2 - $ v4l2-ctl -d2 -c horizontal_movement=4 - $ v4l2-ctl -d1 --overlay=1 - $ v4l2-ctl -d0 -c loop_video=1 - $ v4l2-ctl -d2 --stream-mmap --overlay=1 - -And from another console: - -.. code-block:: none - - $ v4l2-ctl -d1 --stream-out-mmap - -And yet another console: - -.. code-block:: none - - $ qv4l2 - -and start streaming. - -As you can see, this is not for the faint of heart... - - Output Overlay -------------- @@ -1405,8 +1352,6 @@ Just as a reminder and in no particular order: - Add ARGB888 overlay support: better testing of the alpha channel - Improve pixel aspect support in the tpg code by passing a real v4l2_fract - Use per-queue locks and/or per-device locks to improve throughput -- Add support to loop from a specific output to a specific input across - vivid instances - The SDR radio should use the same 'frequencies' for stations as the normal radio receiver, and give back noise if the frequency doesn't match up with a station frequency diff --git a/Documentation/admin-guide/mm/damon/start.rst b/Documentation/admin-guide/mm/damon/start.rst index 7aa0071ff1c3..054010a7f3d8 100644 --- a/Documentation/admin-guide/mm/damon/start.rst +++ b/Documentation/admin-guide/mm/damon/start.rst @@ -34,18 +34,56 @@ detail) of DAMON, you should ensure :doc:`sysfs </filesystems/sysfs>` is mounted. +Snapshot Data Access Patterns +============================= + +The commands below show the memory access pattern of a program at the moment of +the execution. :: + + $ git clone https://github.com/sjp38/masim; cd masim; make + $ sudo damo start "./masim ./configs/stairs.cfg --quiet" + $ sudo ./damo show + 0 addr [85.541 TiB , 85.541 TiB ) (57.707 MiB ) access 0 % age 10.400 s + 1 addr [85.541 TiB , 85.542 TiB ) (413.285 MiB) access 0 % age 11.400 s + 2 addr [127.649 TiB , 127.649 TiB) (57.500 MiB ) access 0 % age 1.600 s + 3 addr [127.649 TiB , 127.649 TiB) (32.500 MiB ) access 0 % age 500 ms + 4 addr [127.649 TiB , 127.649 TiB) (9.535 MiB ) access 100 % age 300 ms + 5 addr [127.649 TiB , 127.649 TiB) (8.000 KiB ) access 60 % age 0 ns + 6 addr [127.649 TiB , 127.649 TiB) (6.926 MiB ) access 0 % age 1 s + 7 addr [127.998 TiB , 127.998 TiB) (120.000 KiB) access 0 % age 11.100 s + 8 addr [127.998 TiB , 127.998 TiB) (8.000 KiB ) access 40 % age 100 ms + 9 addr [127.998 TiB , 127.998 TiB) (4.000 KiB ) access 0 % age 11 s + total size: 577.590 MiB + $ sudo ./damo stop + +The first command of the above example downloads and builds an artificial +memory access generator program called ``masim``. The second command asks DAMO +to execute the artificial generator process start via the given command and +make DAMON monitors the generator process. The third command retrieves the +current snapshot of the monitored access pattern of the process from DAMON and +shows the pattern in a human readable format. + +Each line of the output shows which virtual address range (``addr [XX, XX)``) +of the process is how frequently (``access XX %``) accessed for how long time +(``age XX``). For example, the fifth region of ~9 MiB size is being most +frequently accessed for last 300 milliseconds. Finally, the fourth command +stops DAMON. + +Note that DAMON can monitor not only virtual address spaces but multiple types +of address spaces including the physical address space. + + Recording Data Access Patterns ============================== The commands below record the memory access patterns of a program and save the monitoring results to a file. :: - $ git clone https://github.com/sjp38/masim - $ cd masim; make; ./masim ./configs/zigzag.cfg & + $ ./masim ./configs/zigzag.cfg & $ sudo damo record -o damon.data $(pidof masim) -The first two lines of the commands download an artificial memory access -generator program and run it in the background. The generator will repeatedly +The line of the commands run the artificial memory access +generator program again. The generator will repeatedly access two 100 MiB sized memory regions one by one. You can substitute this with your real workload. The last line asks ``damo`` to record the access pattern in the ``damon.data`` file. diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index e58ceb89ea2a..26df6cfa4441 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -78,7 +78,7 @@ comma (","). │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ │ :ref:`schemes <sysfs_schemes>`/nr_schemes - │ │ │ │ │ │ :ref:`0 <sysfs_scheme>`/action,apply_interval_us + │ │ │ │ │ │ :ref:`0 <sysfs_scheme>`/action,target_nid,apply_interval_us │ │ │ │ │ │ │ :ref:`access_pattern <sysfs_access_pattern>`/ │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max @@ -289,14 +289,18 @@ schemes/<N>/ ------------ In each scheme directory, five directories (``access_pattern``, ``quotas``, -``watermarks``, ``filters``, ``stats``, and ``tried_regions``) and two files -(``action`` and ``apply_interval``) exist. +``watermarks``, ``filters``, ``stats``, and ``tried_regions``) and three files +(``action``, ``target_nid`` and ``apply_interval``) exist. The ``action`` file is for setting and getting the scheme's :ref:`action <damon_design_damos_action>`. The keywords that can be written to and read from the file and their meaning are same to those of the list on :ref:`design doc <damon_design_damos_action>`. +The ``target_nid`` file is for setting the migration target node, which is +only meaningful when the ``action`` is either ``migrate_hot`` or +``migrate_cold``. + The ``apply_interval_us`` file is for setting and getting the scheme's :ref:`apply_interval <damon_design_damos>` in microseconds. diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst index 1f883abf3f00..8b35795b664b 100644 --- a/Documentation/admin-guide/mm/index.rst +++ b/Documentation/admin-guide/mm/index.rst @@ -10,7 +10,7 @@ processes address space and many other cool things. Linux memory management is a complex system with many configurable settings. Most of these settings are available via ``/proc`` -filesystem and can be quired and adjusted using ``sysctl``. These APIs +filesystem and can be queried and adjusted using ``sysctl``. These APIs are described in Documentation/admin-guide/sysctl/vm.rst and in `man 5 proc`_. .. _man 5 proc: http://man7.org/linux/man-pages/man5/proc.5.html diff --git a/Documentation/admin-guide/mm/pagemap.rst b/Documentation/admin-guide/mm/pagemap.rst index f5f065c67615..caba0f52dd36 100644 --- a/Documentation/admin-guide/mm/pagemap.rst +++ b/Documentation/admin-guide/mm/pagemap.rst @@ -118,7 +118,7 @@ Short descriptions to the page flags 21 - KSM Identical memory pages dynamically shared between one or more processes. 22 - THP - Contiguous pages which construct transparent hugepages. + Contiguous pages which construct THP of any size and mapped by any granularity. 23 - OFFLINE The page is logically offline. 24 - ZERO_PAGE @@ -173,27 +173,6 @@ LRU related page flags The page-types tool in the tools/mm directory can be used to query the above flags. -Using pagemap to do something useful -==================================== - -The general procedure for using pagemap to find out about a process' memory -usage goes like this: - - 1. Read ``/proc/pid/maps`` to determine which parts of the memory space are - mapped to what. - 2. Select the maps you are interested in -- all of them, or a particular - library, or the stack or the heap, etc. - 3. Open ``/proc/pid/pagemap`` and seek to the pages you would like to examine. - 4. Read a u64 for each page from pagemap. - 5. Open ``/proc/kpagecount`` and/or ``/proc/kpageflags``. For each PFN you - just read, seek to that entry in the file, and read the data you want. - -For example, to find the "unique set size" (USS), which is the amount of -memory that a process is using that is not shared with any other process, -you can go through every map in the process, find the PFNs, look those up -in kpagecount, and tally up the number of pages that are only referenced -once. - Exceptions for Shared Memory ============================ @@ -252,7 +231,7 @@ Following flags about pages are currently supported: - ``PAGE_IS_PRESENT`` - Page is present in the memory - ``PAGE_IS_SWAPPED`` - Page is in swapped - ``PAGE_IS_PFNZERO`` - Page has zero PFN -- ``PAGE_IS_HUGE`` - Page is THP or Hugetlb backed +- ``PAGE_IS_HUGE`` - Page is PMD-mapped THP or Hugetlb backed - ``PAGE_IS_SOFT_DIRTY`` - Page is soft-dirty The ``struct pm_scan_arg`` is used as the argument of the IOCTL. diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst index d414d3f5592a..058485daf186 100644 --- a/Documentation/admin-guide/mm/transhuge.rst +++ b/Documentation/admin-guide/mm/transhuge.rst @@ -202,12 +202,11 @@ PMD-mappable transparent hugepage:: cat /sys/kernel/mm/transparent_hugepage/hpage_pmd_size -khugepaged will be automatically started when one or more hugepage -sizes are enabled (either by directly setting "always" or "madvise", -or by setting "inherit" while the top-level enabled is set to "always" -or "madvise"), and it'll be automatically shutdown when the last -hugepage size is disabled (either by directly setting "never", or by -setting "inherit" while the top-level enabled is set to "never"). +khugepaged will be automatically started when PMD-sized THP is enabled +(either of the per-size anon control or the top-level control are set +to "always" or "madvise"), and it'll be automatically shutdown when +PMD-sized THP is disabled (when both the per-size anon control and the +top-level control are "never") Khugepaged controls ------------------- @@ -332,6 +331,31 @@ deny force Force the huge option on for all - very useful for testing; +Shmem can also use "multi-size THP" (mTHP) by adding a new sysfs knob to +control mTHP allocation: +'/sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/shmem_enabled', +and its value for each mTHP is essentially consistent with the global +setting. An 'inherit' option is added to ensure compatibility with these +global settings. Conversely, the options 'force' and 'deny' are dropped, +which are rather testing artifacts from the old ages. + +always + Attempt to allocate <size> huge pages every time we need a new page; + +inherit + Inherit the top-level "shmem_enabled" value. By default, PMD-sized hugepages + have enabled="inherit" and all other hugepage sizes have enabled="never"; + +never + Do not allocate <size> huge pages; + +within_size + Only allocate <size> huge page if it will be fully within i_size. + Also respect fadvise()/madvise() hints; + +advise + Only allocate <size> huge pages if requested with fadvise()/madvise(); + Need of application restart =========================== @@ -344,10 +368,6 @@ also applies to the regions registered in khugepaged. Monitoring usage ================ -.. note:: - Currently the below counters only record events relating to - PMD-sized THP. Events relating to other THP sizes are not included. - The number of PMD-sized anonymous transparent huge pages currently used by the system is available by reading the AnonHugePages field in ``/proc/meminfo``. To identify what applications are using PMD-sized anonymous transparent huge @@ -392,20 +412,23 @@ thp_collapse_alloc_failed the allocation. thp_file_alloc - is incremented every time a file huge page is successfully - allocated. + is incremented every time a shmem huge page is successfully + allocated (Note that despite being named after "file", the counter + measures only shmem). thp_file_fallback - is incremented if a file huge page is attempted to be allocated - but fails and instead falls back to using small pages. + is incremented if a shmem huge page is attempted to be allocated + but fails and instead falls back to using small pages. (Note that + despite being named after "file", the counter measures only shmem). thp_file_fallback_charge - is incremented if a file huge page cannot be charged and instead + is incremented if a shmem huge page cannot be charged and instead falls back to using small pages even though the allocation was - successful. + successful. (Note that despite being named after "file", the + counter measures only shmem). thp_file_mapped - is incremented every time a file huge page is mapped into + is incremented every time a file or shmem huge page is mapped into user address space. thp_split_page @@ -476,6 +499,34 @@ swpout_fallback Usually because failed to allocate some continuous swap space for the huge page. +shmem_alloc + is incremented every time a shmem huge page is successfully + allocated. + +shmem_fallback + is incremented if a shmem huge page is attempted to be allocated + but fails and instead falls back to using small pages. + +shmem_fallback_charge + is incremented if a shmem huge page cannot be charged and instead + falls back to using small pages even though the allocation was + successful. + +split + is incremented every time a huge page is successfully split into + smaller orders. This can happen for a variety of reasons but a + common reason is that a huge page is old and is being reclaimed. + +split_failed + is incremented if kernel fails to split huge + page. This can happen if the page was pinned by somebody. + +split_deferred + is incremented when a huge page is put onto split queue. + This happens when a huge page is partially unmapped and splitting + it would free up some memory. Pages on split queue are going to + be split under memory pressure, if splitting is possible. + As the system ages, allocating huge pages may be expensive as the system uses memory compaction to copy data around memory to free a huge page for use. There are some counters in ``/proc/vmstat`` to help diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst index 1e0d101b020a..d0324d44f548 100644 --- a/Documentation/admin-guide/pm/amd-pstate.rst +++ b/Documentation/admin-guide/pm/amd-pstate.rst @@ -281,6 +281,22 @@ integer values defined between 0 to 255 when EPP feature is enabled by platform firmware, if EPP feature is disabled, driver will ignore the written value This attribute is read-write. +``boost`` +The `boost` sysfs attribute provides control over the CPU core +performance boost, allowing users to manage the maximum frequency limitation +of the CPU. This attribute can be used to enable or disable the boost feature +on individual CPUs. + +When the boost feature is enabled, the CPU can dynamically increase its frequency +beyond the base frequency, providing enhanced performance for demanding workloads. +On the other hand, disabling the boost feature restricts the CPU to operate at the +base frequency, which may be desirable in certain scenarios to prioritize power +efficiency or manage temperature. + +To manipulate the `boost` attribute, users can write a value of `0` to disable the +boost or `1` to enable it, for the respective CPU using the sysfs path +`/sys/devices/system/cpu/cpuX/cpufreq/boost`, where `X` represents the CPU number. + Other performance and frequency values can be read back from ``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`. @@ -406,7 +422,7 @@ control its functionality at the system level. They are located in the ``/sys/devices/system/cpu/amd_pstate/`` directory and affect all CPUs. ``status`` - Operation mode of the driver: "active", "passive" or "disable". + Operation mode of the driver: "active", "passive", "guided" or "disable". "active" The driver is functional and in the ``active mode`` diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 6adb7988e0eb..fe1be4ad88cb 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -267,6 +267,10 @@ are the following: ``related_cpus`` List of all (online and offline) CPUs belonging to this policy. +``scaling_available_frequencies`` + List of available frequencies of the CPUs belonging to this policy + (in kHz). + ``scaling_available_governors`` List of ``CPUFreq`` scaling governors present in the kernel that can be attached to this policy or (if the |intel_pstate| scaling driver is diff --git a/Documentation/admin-guide/pmf.rst b/Documentation/admin-guide/pmf.rst deleted file mode 100644 index 9ee729ffc19b..000000000000 --- a/Documentation/admin-guide/pmf.rst +++ /dev/null @@ -1,24 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -Set udev rules for PMF Smart PC Builder ---------------------------------------- - -AMD PMF(Platform Management Framework) Smart PC Solution builder has to set the system states -like S0i3, Screen lock, hibernate etc, based on the output actions provided by the PMF -TA (Trusted Application). - -In order for this to work the PMF driver generates a uevent for userspace to react to. Below are -sample udev rules that can facilitate this experience when a machine has PMF Smart PC solution builder -enabled. - -Please add the following line(s) to -``/etc/udev/rules.d/99-local.rules``:: - - DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="0", RUN+="/usr/bin/systemctl suspend" - DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="1", RUN+="/usr/bin/systemctl hibernate" - DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="2", RUN+="/bin/loginctl lock-sessions" - -EVENT_ID values: -0= Put the system to S0i3/S2Idle -1= Put the system to hibernate -2= Lock the screen diff --git a/Documentation/admin-guide/ramoops.rst b/Documentation/admin-guide/ramoops.rst index e9f85142182d..6f534a707b2a 100644 --- a/Documentation/admin-guide/ramoops.rst +++ b/Documentation/admin-guide/ramoops.rst @@ -23,6 +23,8 @@ and type of the memory area are set using three variables: * ``mem_size`` for the size. The memory size will be rounded down to a power of two. * ``mem_type`` to specify if the memory type (default is pgprot_writecombine). + * ``mem_name`` to specify a memory region defined by ``reserve_mem`` command + line parameter. Typically the default value of ``mem_type=0`` should be used as that sets the pstore mapping to pgprot_writecombine. Setting ``mem_type=1`` attempts to use @@ -118,6 +120,17 @@ Setting the ramoops parameters can be done in several different manners: return ret; } + D. Using a region of memory reserved via ``reserve_mem`` command line + parameter. The address and size will be defined by the ``reserve_mem`` + parameter. Note, that ``reserve_mem`` may not always allocate memory + in the same location, and cannot be relied upon. Testing will need + to be done, and it may not work on every machine, nor every kernel. + Consider this a "best effort" approach. The ``reserve_mem`` option + takes a size, alignment and name as arguments. The name is used + to map the memory to a label that can be retrieved by ramoops. + + reserver_mem=2M:4096:oops ramoops.mem_name=oops + You can specify either RAM memory or peripheral devices' memory. However, when specifying RAM, be sure to reserve the memory by issuing memblock_reserve() very early in the architecture code, e.g.:: diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index 7fd43947832f..f8bc1630eba0 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -454,7 +454,7 @@ ignore-unaligned-usertrap On architectures where unaligned accesses cause traps, and where this feature is supported (``CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN``; -currently, ``arc`` and ``loongarch``), controls whether all +currently, ``arc``, ``parisc`` and ``loongarch``), controls whether all unaligned traps are logged. = ============================================================= diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst index e86c968a7a0e..f48eaa98d22d 100644 --- a/Documentation/admin-guide/sysctl/vm.rst +++ b/Documentation/admin-guide/sysctl/vm.rst @@ -36,6 +36,7 @@ Currently, these files are in /proc/sys/vm: - dirtytime_expire_seconds - dirty_writeback_centisecs - drop_caches +- enable_soft_offline - extfrag_threshold - highmem_is_dirtyable - hugetlb_shm_group @@ -267,6 +268,43 @@ used:: These are informational only. They do not mean that anything is wrong with your system. To disable them, echo 4 (bit 2) into drop_caches. +enable_soft_offline +=================== +Correctable memory errors are very common on servers. Soft-offline is kernel's +solution for memory pages having (excessive) corrected memory errors. + +For different types of page, soft-offline has different behaviors / costs. + +- For a raw error page, soft-offline migrates the in-use page's content to + a new raw page. + +- For a page that is part of a transparent hugepage, soft-offline splits the + transparent hugepage into raw pages, then migrates only the raw error page. + As a result, user is transparently backed by 1 less hugepage, impacting + memory access performance. + +- For a page that is part of a HugeTLB hugepage, soft-offline first migrates + the entire HugeTLB hugepage, during which a free hugepage will be consumed + as migration target. Then the original hugepage is dissolved into raw + pages without compensation, reducing the capacity of the HugeTLB pool by 1. + +It is user's call to choose between reliability (staying away from fragile +physical memory) vs performance / capacity implications in transparent and +HugeTLB cases. + +For all architectures, enable_soft_offline controls whether to soft offline +memory pages. When set to 1, kernel attempts to soft offline the pages +whenever it thinks needed. When set to 0, kernel returns EOPNOTSUPP to +the request to soft offline the pages. Its default value is 1. + +It is worth mentioning that after setting enable_soft_offline to 0, the +following requests to soft offline pages will not be performed: + +- Request to soft offline pages from RAS Correctable Errors Collector. + +- On ARM, the request to soft offline pages from GHES driver. + +- On PARISC, the request to soft offline pages from Page Deallocation Table. extfrag_threshold ================= diff --git a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst index c389d4fd7599..6281eae9e6bc 100644 --- a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst +++ b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst @@ -23,7 +23,7 @@ mistakes occasionally made even by experienced developers. up in the reference section, then jump back to where you left off. .. Find the latest rendered version of this text here: - https://docs.kernel.org/admin-guide/verify-bugs-and-bisect-regressions.rst.html + https://docs.kernel.org/admin-guide/verify-bugs-and-bisect-regressions.html The essence of the process (aka 'TL;DR') ======================================== diff --git a/Documentation/arch/arm64/cpu-hotplug.rst b/Documentation/arch/arm64/cpu-hotplug.rst new file mode 100644 index 000000000000..76ba8d932c72 --- /dev/null +++ b/Documentation/arch/arm64/cpu-hotplug.rst @@ -0,0 +1,79 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. _cpuhp_index: + +==================== +CPU Hotplug and ACPI +==================== + +CPU hotplug in the arm64 world is commonly used to describe the kernel taking +CPUs online/offline using PSCI. This document is about ACPI firmware allowing +CPUs that were not available during boot to be added to the system later. + +``possible`` and ``present`` refer to the state of the CPU as seen by linux. + + +CPU Hotplug on physical systems - CPUs not present at boot +---------------------------------------------------------- + +Physical systems need to mark a CPU that is ``possible`` but not ``present`` as +being ``present``. An example would be a dual socket machine, where the package +in one of the sockets can be replaced while the system is running. + +This is not supported. + +In the arm64 world CPUs are not a single device but a slice of the system. +There are no systems that support the physical addition (or removal) of CPUs +while the system is running, and ACPI is not able to sufficiently describe +them. + +e.g. New CPUs come with new caches, but the platform's cache toplogy is +described in a static table, the PPTT. How caches are shared between CPUs is +not discoverable, and must be described by firmware. + +e.g. The GIC redistributor for each CPU must be accessed by the driver during +boot to discover the system wide supported features. ACPI's MADT GICC +structures can describe a redistributor associated with a disabled CPU, but +can't describe whether the redistributor is accessible, only that it is not +'always on'. + +arm64's ACPI tables assume that everything described is ``present``. + + +CPU Hotplug on virtual systems - CPUs not enabled at boot +--------------------------------------------------------- + +Virtual systems have the advantage that all the properties the system will +ever have can be described at boot. There are no power-domain considerations +as such devices are emulated. + +CPU Hotplug on virtual systems is supported. It is distinct from physical +CPU Hotplug as all resources are described as ``present``, but CPUs may be +marked as disabled by firmware. Only the CPU's online/offline behaviour is +influenced by firmware. An example is where a virtual machine boots with a +single CPU, and additional CPUs are added once a cloud orchestrator deploys +the workload. + +For a virtual machine, the VMM (e.g. Qemu) plays the part of firmware. + +Virtual hotplug is implemented as a firmware policy affecting which CPUs can be +brought online. Firmware can enforce its policy via PSCI's return codes. e.g. +``DENIED``. + +The ACPI tables must describe all the resources of the virtual machine. CPUs +that firmware wishes to disable either from boot (or later) should not be +``enabled`` in the MADT GICC structures, but should have the ``online capable`` +bit set, to indicate they can be enabled later. The boot CPU must be marked as +``enabled``. The 'always on' GICR structure must be used to describe the +redistributors. + +CPUs described as ``online capable`` but not ``enabled`` can be set to enabled +by the DSDT's Processor object's _STA method. On virtual systems the _STA method +must always report the CPU as ``present``. Changes to the firmware policy can +be notified to the OS via device-check or eject-request. + +CPUs described as ``enabled`` in the static table, should not have their _STA +modified dynamically by firmware. Soft-restart features such as kexec will +re-read the static properties of the system from these static tables, and +may malfunction if these no longer describe the running system. Linux will +re-discover the dynamic properties of the system from the _STA method later +during boot. diff --git a/Documentation/arch/arm64/index.rst b/Documentation/arch/arm64/index.rst index d08e924204bf..78544de0a8a9 100644 --- a/Documentation/arch/arm64/index.rst +++ b/Documentation/arch/arm64/index.rst @@ -13,6 +13,7 @@ ARM64 Architecture asymmetric-32bit booting cpu-feature-registers + cpu-hotplug elf_hwcaps hugetlbpage kdump diff --git a/Documentation/arch/arm64/memory.rst b/Documentation/arch/arm64/memory.rst index 55a55f30eed8..8a658984b8bb 100644 --- a/Documentation/arch/arm64/memory.rst +++ b/Documentation/arch/arm64/memory.rst @@ -18,12 +18,10 @@ ARMv8.2 adds optional support for Large Virtual Address space. This is only available when running with a 64KB page size and expands the number of descriptors in the first level of translation. -User addresses have bits 63:48 set to 0 while the kernel addresses have -the same bits set to 1. TTBRx selection is given by bit 63 of the -virtual address. The swapper_pg_dir contains only kernel (global) -mappings while the user pgd contains only user (non-global) mappings. -The swapper_pg_dir address is written to TTBR1 and never written to -TTBR0. +TTBRx selection is given by bit 55 of the virtual address. The +swapper_pg_dir contains only kernel (global) mappings while the user pgd +contains only user (non-global) mappings. The swapper_pg_dir address is +written to TTBR1 and never written to TTBR0. AArch64 Linux memory layout with 4KB pages + 4 levels (48-bit):: @@ -65,14 +63,14 @@ Translation table lookup with 4KB pages:: +--------+--------+--------+--------+--------+--------+--------+--------+ |63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0| +--------+--------+--------+--------+--------+--------+--------+--------+ - | | | | | | - | | | | | v - | | | | | [11:0] in-page offset - | | | | +-> [20:12] L3 index - | | | +-----------> [29:21] L2 index - | | +---------------------> [38:30] L1 index - | +-------------------------------> [47:39] L0 index - +-------------------------------------------------> [63] TTBR0/1 + | | | | | | + | | | | | v + | | | | | [11:0] in-page offset + | | | | +-> [20:12] L3 index + | | | +-----------> [29:21] L2 index + | | +---------------------> [38:30] L1 index + | +-------------------------------> [47:39] L0 index + +----------------------------------------> [55] TTBR0/1 Translation table lookup with 64KB pages:: @@ -80,14 +78,14 @@ Translation table lookup with 64KB pages:: +--------+--------+--------+--------+--------+--------+--------+--------+ |63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0| +--------+--------+--------+--------+--------+--------+--------+--------+ - | | | | | - | | | | v - | | | | [15:0] in-page offset - | | | +----------> [28:16] L3 index - | | +--------------------------> [41:29] L2 index - | +-------------------------------> [47:42] L1 index (48-bit) - | [51:42] L1 index (52-bit) - +-------------------------------------------------> [63] TTBR0/1 + | | | | | + | | | | v + | | | | [15:0] in-page offset + | | | +----------> [28:16] L3 index + | | +--------------------------> [41:29] L2 index + | +-------------------------------> [47:42] L1 index (48-bit) + | [51:42] L1 index (52-bit) + +----------------------------------------> [55] TTBR0/1 When using KVM without the Virtualization Host Extensions, the diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index eb8af8032c31..50327c05be8d 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -122,26 +122,50 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A76 | #1490853 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A76 | #3324349 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A77 | #1491015 | N/A | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A77 | #1508412 | ARM64_ERRATUM_1508412 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A77 | #3324348 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A78 | #3324344 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A78C | #3324346,3324347| ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2119858 | ARM64_ERRATUM_2119858 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2054223 | ARM64_ERRATUM_2054223 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2224489 | ARM64_ERRATUM_2224489 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A710 | #3324338 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A715 | #2645198 | ARM64_ERRATUM_2645198 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A720 | #3456091 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A725 | #3456106 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-X1 | #1502854 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X1 | #3324344 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X1C | #3324346 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-X2 | #2119858 | ARM64_ERRATUM_2119858 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-X2 | #2224489 | ARM64_ERRATUM_2224489 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X2 | #3324338 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X3 | #3324335 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-X4 | #3194386 | ARM64_ERRATUM_3194386 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-X925 | #3324334 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1188873,1418040| ARM64_ERRATUM_1418040 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1349291 | N/A | @@ -150,15 +174,23 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N1 | #1542419 | ARM64_ERRATUM_1542419 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Neoverse-N1 | #3324349 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N2 | #2139208 | ARM64_ERRATUM_2139208 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N2 | #2067961 | ARM64_ERRATUM_2067961 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-N2 | #2253138 | ARM64_ERRATUM_2253138 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Neoverse-N2 | #3324339 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-V1 | #1619801 | N/A | +----------------+-----------------+-----------------+-----------------------------+ -| ARM | Neoverse-V3 | #3312417 | ARM64_ERRATUM_3312417 | +| ARM | Neoverse-V1 | #3324341 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Neoverse-V2 | #3324336 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Neoverse-V3 | #3312417 | ARM64_ERRATUM_3194386 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | MMU-500 | #841119,826419 | N/A | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/arch/powerpc/cpu_families.rst b/Documentation/arch/powerpc/cpu_families.rst index eb7e60649b43..f55433c6b8f3 100644 --- a/Documentation/arch/powerpc/cpu_families.rst +++ b/Documentation/arch/powerpc/cpu_families.rst @@ -128,24 +128,6 @@ IBM BookE - All 32 bit:: +--------------+ - | 401 | - +--------------+ - | - | - v - +--------------+ - | 403 | - +--------------+ - | - | - v - +--------------+ - | 405 | - +--------------+ - | - | - v - +--------------+ | 440 | +--------------+ | diff --git a/Documentation/arch/powerpc/elf_hwcaps.rst b/Documentation/arch/powerpc/elf_hwcaps.rst index 4c896cf077c2..fce7489877b5 100644 --- a/Documentation/arch/powerpc/elf_hwcaps.rst +++ b/Documentation/arch/powerpc/elf_hwcaps.rst @@ -91,6 +91,7 @@ PPC_FEATURE_HAS_MMU PPC_FEATURE_HAS_4xxMAC The processor is 40x or 44x family. + Unused in the kernel since 732b32daef80 ("powerpc: Remove core support for 40x") PPC_FEATURE_UNIFIED_CACHE The processor has a unified L1 cache for instructions and data, as diff --git a/Documentation/arch/powerpc/kvm-nested.rst b/Documentation/arch/powerpc/kvm-nested.rst index 630602a8aa00..5defd13cc6c1 100644 --- a/Documentation/arch/powerpc/kvm-nested.rst +++ b/Documentation/arch/powerpc/kvm-nested.rst @@ -546,7 +546,9 @@ table information. +--------+-------+----+--------+----------------------------------+ | 0x1052 | 0x08 | RW | T | CTRL | +--------+-------+----+--------+----------------------------------+ -| 0x1053-| | | | Reserved | +| 0x1053 | 0x08 | RW | T | DPDES | ++--------+-------+----+--------+----------------------------------+ +| 0x1054-| | | | Reserved | | 0x1FFF | | | | | +--------+-------+----+--------+----------------------------------+ | 0x2000 | 0x04 | RW | T | CR | diff --git a/Documentation/arch/riscv/cmodx.rst b/Documentation/arch/riscv/cmodx.rst index 1c0ca06b6c97..8c48bcff3df9 100644 --- a/Documentation/arch/riscv/cmodx.rst +++ b/Documentation/arch/riscv/cmodx.rst @@ -62,10 +62,10 @@ cmodx.c:: printf("Value before cmodx: %d\n", value); // Call prctl before first fence.i is called inside modify_instruction - prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX_ON, PR_RISCV_CTX_SW_FENCEI, PR_RISCV_SCOPE_PER_PROCESS); + prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX, PR_RISCV_CTX_SW_FENCEI_ON, PR_RISCV_SCOPE_PER_PROCESS); modify_instruction(); // Call prctl after final fence.i is called in process - prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX_OFF, PR_RISCV_CTX_SW_FENCEI, PR_RISCV_SCOPE_PER_PROCESS); + prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX, PR_RISCV_CTX_SW_FENCEI_OFF, PR_RISCV_SCOPE_PER_PROCESS); value = get_value(); printf("Value after cmodx: %d\n", value); diff --git a/Documentation/arch/riscv/hwprobe.rst b/Documentation/arch/riscv/hwprobe.rst index 204cd4433af5..3db60a0911df 100644 --- a/Documentation/arch/riscv/hwprobe.rst +++ b/Documentation/arch/riscv/hwprobe.rst @@ -192,6 +192,53 @@ The following keys are defined: supported as defined in the RISC-V ISA manual starting from commit d8ab5c78c207 ("Zihintpause is ratified"). + * :c:macro:`RISCV_HWPROBE_EXT_ZVE32X`: The Vector sub-extension Zve32x is + supported, as defined by version 1.0 of the RISC-V Vector extension manual. + + * :c:macro:`RISCV_HWPROBE_EXT_ZVE32F`: The Vector sub-extension Zve32f is + supported, as defined by version 1.0 of the RISC-V Vector extension manual. + + * :c:macro:`RISCV_HWPROBE_EXT_ZVE64X`: The Vector sub-extension Zve64x is + supported, as defined by version 1.0 of the RISC-V Vector extension manual. + + * :c:macro:`RISCV_HWPROBE_EXT_ZVE64F`: The Vector sub-extension Zve64f is + supported, as defined by version 1.0 of the RISC-V Vector extension manual. + + * :c:macro:`RISCV_HWPROBE_EXT_ZVE64D`: The Vector sub-extension Zve64d is + supported, as defined by version 1.0 of the RISC-V Vector extension manual. + + * :c:macro:`RISCV_HWPROBE_EXT_ZIMOP`: The Zimop May-Be-Operations extension is + supported as defined in the RISC-V ISA manual starting from commit + 58220614a5f ("Zimop is ratified/1.0"). + + * :c:macro:`RISCV_HWPROBE_EXT_ZCA`: The Zca extension part of Zc* standard + extensions for code size reduction, as ratified in commit 8be3419c1c0 + ("Zcf doesn't exist on RV64 as it contains no instructions") of + riscv-code-size-reduction. + + * :c:macro:`RISCV_HWPROBE_EXT_ZCB`: The Zcb extension part of Zc* standard + extensions for code size reduction, as ratified in commit 8be3419c1c0 + ("Zcf doesn't exist on RV64 as it contains no instructions") of + riscv-code-size-reduction. + + * :c:macro:`RISCV_HWPROBE_EXT_ZCD`: The Zcd extension part of Zc* standard + extensions for code size reduction, as ratified in commit 8be3419c1c0 + ("Zcf doesn't exist on RV64 as it contains no instructions") of + riscv-code-size-reduction. + + * :c:macro:`RISCV_HWPROBE_EXT_ZCF`: The Zcf extension part of Zc* standard + extensions for code size reduction, as ratified in commit 8be3419c1c0 + ("Zcf doesn't exist on RV64 as it contains no instructions") of + riscv-code-size-reduction. + + * :c:macro:`RISCV_HWPROBE_EXT_ZCMOP`: The Zcmop May-Be-Operations extension is + supported as defined in the RISC-V ISA manual starting from commit + c732a4f39a4 ("Zcmop is ratified/1.0"). + + * :c:macro:`RISCV_HWPROBE_EXT_ZAWRS`: The Zawrs extension is supported as + ratified in commit 98918c844281 ("Merge pull request #1217 from + riscv/zawrs") of riscv-isa-manual. + * :c:macro:`RISCV_HWPROBE_KEY_CPUPERF_0`: A bitmask that contains performance information about the selected set of processors. @@ -214,3 +261,8 @@ The following keys are defined: * :c:macro:`RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE`: An unsigned int which represents the size of the Zicboz block in bytes. + +* :c:macro:`RISCV_HWPROBE_KEY_HIGHEST_VIRT_ADDRESS`: An unsigned long which + represent the highest userspace virtual address usable. + +* :c:macro:`RISCV_HWPROBE_KEY_TIME_CSR_FREQ`: Frequency (in Hz) of `time CSR`. diff --git a/Documentation/arch/riscv/vm-layout.rst b/Documentation/arch/riscv/vm-layout.rst index e476b4386bd9..077b968dcc81 100644 --- a/Documentation/arch/riscv/vm-layout.rst +++ b/Documentation/arch/riscv/vm-layout.rst @@ -47,11 +47,12 @@ RISC-V Linux Kernel SV39 | Kernel-space virtual memory, shared between all processes: ____________________________________________________________|___________________________________________________________ | | | | - ffffffc6fea00000 | -228 GB | ffffffc6feffffff | 6 MB | fixmap - ffffffc6ff000000 | -228 GB | ffffffc6ffffffff | 16 MB | PCI io - ffffffc700000000 | -228 GB | ffffffc7ffffffff | 4 GB | vmemmap - ffffffc800000000 | -224 GB | ffffffd7ffffffff | 64 GB | vmalloc/ioremap space - ffffffd800000000 | -160 GB | fffffff6ffffffff | 124 GB | direct mapping of all physical memory + ffffffc4fea00000 | -236 GB | ffffffc4feffffff | 6 MB | fixmap + ffffffc4ff000000 | -236 GB | ffffffc4ffffffff | 16 MB | PCI io + ffffffc500000000 | -236 GB | ffffffc5ffffffff | 4 GB | vmemmap + ffffffc600000000 | -232 GB | ffffffd5ffffffff | 64 GB | vmalloc/ioremap space + ffffffd600000000 | -168 GB | fffffff5ffffffff | 128 GB | direct mapping of all physical memory + | | | | fffffff700000000 | -36 GB | fffffffeffffffff | 32 GB | kasan __________________|____________|__________________|_________|____________________________________________________________ | diff --git a/Documentation/arch/x86/amd-memory-encryption.rst b/Documentation/arch/x86/amd-memory-encryption.rst index 414bc7402ae7..6df3264f23b9 100644 --- a/Documentation/arch/x86/amd-memory-encryption.rst +++ b/Documentation/arch/x86/amd-memory-encryption.rst @@ -130,4 +130,31 @@ SNP feature support. More details in AMD64 APM[1] Vol 2: 15.34.10 SEV_STATUS MSR -[1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/24593.pdf +Secure VM Service Module (SVSM) +=============================== +SNP provides a feature called Virtual Machine Privilege Levels (VMPL) which +defines four privilege levels at which guest software can run. The most +privileged level is 0 and numerically higher numbers have lesser privileges. +More details in the AMD64 APM Vol 2, section "15.35.7 Virtual Machine +Privilege Levels", docID: 24593. + +When using that feature, different services can run at different protection +levels, apart from the guest OS but still within the secure SNP environment. +They can provide services to the guest, like a vTPM, for example. + +When a guest is not running at VMPL0, it needs to communicate with the software +running at VMPL0 to perform privileged operations or to interact with secure +services. An example fur such a privileged operation is PVALIDATE which is +*required* to be executed at VMPL0. + +In this scenario, the software running at VMPL0 is usually called a Secure VM +Service Module (SVSM). Discovery of an SVSM and the API used to communicate +with it is documented in "Secure VM Service Module for SEV-SNP Guests", docID: +58019. + +(Latest versions of the above-mentioned documents can be found by using +a search engine like duckduckgo.com and typing in: + + site:amd.com "Secure VM Service Module for SEV-SNP Guests", docID: 58019 + +for example.) diff --git a/Documentation/arch/x86/cpuinfo.rst b/Documentation/arch/x86/cpuinfo.rst index 8895784d4784..6ef426a52cdc 100644 --- a/Documentation/arch/x86/cpuinfo.rst +++ b/Documentation/arch/x86/cpuinfo.rst @@ -112,7 +112,7 @@ conditions are met, the features are enabled by the set_cpu_cap or setup_force_cpu_cap macros. For example, if bit 5 is set in MSR_IA32_CORE_CAPS, the feature X86_FEATURE_SPLIT_LOCK_DETECT will be enabled and "split_lock_detect" will be displayed. The flag "ring3mwait" will be -displayed only when running on INTEL_FAM6_XEON_PHI_[KNL|KNM] processors. +displayed only when running on INTEL_XEON_PHI_[KNL|KNM] processors. d: Flags can represent purely software features. ------------------------------------------------ diff --git a/Documentation/arch/x86/exception-tables.rst b/Documentation/arch/x86/exception-tables.rst index efde1fef4fbd..6e7177363f8f 100644 --- a/Documentation/arch/x86/exception-tables.rst +++ b/Documentation/arch/x86/exception-tables.rst @@ -297,7 +297,7 @@ vma occurs? c) execution continues at local label 2 (address of the instruction immediately after the faulting user access). -The steps 8a to 8c in a certain way emulate the faulting instruction. + The steps a to c above in a certain way emulate the faulting instruction. That's it, mostly. If you look at our example, you might ask why we set EAX to -EFAULT in the exception handler code. Well, the diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst index 627e23869bca..a824affd741d 100644 --- a/Documentation/arch/x86/resctrl.rst +++ b/Documentation/arch/x86/resctrl.rst @@ -375,6 +375,10 @@ When monitoring is enabled all MON groups will also contain: all tasks in the group. In CTRL_MON groups these files provide the sum for all tasks in the CTRL_MON group and all tasks in MON groups. Please see example section for more details on usage. + On systems with Sub-NUMA Cluster (SNC) enabled there are extra + directories for each node (located within the "mon_L3_XX" directory + for the L3 cache they occupy). These are named "mon_sub_L3_YY" + where "YY" is the node number. "mon_hw_id": Available only with debug option. The identifier used by hardware @@ -484,6 +488,29 @@ if non-contiguous 1s value is supported. On a system with a 20-bit mask each bit represents 5% of the capacity of the cache. You could partition the cache into four equal parts with masks: 0x1f, 0x3e0, 0x7c00, 0xf8000. +Notes on Sub-NUMA Cluster mode +============================== +When SNC mode is enabled, Linux may load balance tasks between Sub-NUMA +nodes much more readily than between regular NUMA nodes since the CPUs +on Sub-NUMA nodes share the same L3 cache and the system may report +the NUMA distance between Sub-NUMA nodes with a lower value than used +for regular NUMA nodes. + +The top-level monitoring files in each "mon_L3_XX" directory provide +the sum of data across all SNC nodes sharing an L3 cache instance. +Users who bind tasks to the CPUs of a specific Sub-NUMA node can read +the "llc_occupancy", "mbm_total_bytes", and "mbm_local_bytes" in the +"mon_sub_L3_YY" directories to get node local data. + +Memory bandwidth allocation is still performed at the L3 cache +level. I.e. throttling controls are applied to all SNC nodes. + +L3 cache allocation bitmaps also apply to all SNC nodes. But note that +the amount of L3 cache represented by each bit is divided by the number +of SNC nodes per L3 cache. E.g. with a 100MB cache on a system with 10-bit +allocation masks each bit normally represents 10MB. With SNC mode enabled +with two SNC nodes per L3 cache, each bit only represents 5MB. + Memory bandwidth Allocation and monitoring ========================================== diff --git a/Documentation/block/data-integrity.rst b/Documentation/block/data-integrity.rst index 6a760c0eb192..99905e880a0e 100644 --- a/Documentation/block/data-integrity.rst +++ b/Documentation/block/data-integrity.rst @@ -153,18 +153,11 @@ bio_free() will automatically free the bip. 4.2 Block Device ---------------- -Because the format of the protection data is tied to the physical -disk, each block device has been extended with a block integrity -profile (struct blk_integrity). This optional profile is registered -with the block layer using blk_integrity_register(). - -The profile contains callback functions for generating and verifying -the protection data, as well as getting and setting application tags. -The profile also contains a few constants to aid in completing, -merging and splitting the integrity metadata. +Block devices can set up the integrity information in the integrity +sub-struture of the queue_limits structure. Layered block devices will need to pick a profile that's appropriate -for all subdevices. blk_integrity_compare() can help with that. DM +for all subdevices. queue_limits_stack_integrity() can help with that. DM and MD linear, RAID0 and RAID1 are currently supported. RAID4/5/6 will require extra work due to the application tag. @@ -250,42 +243,6 @@ will require extra work due to the application tag. integrity upon completion. -5.4 Registering A Block Device As Capable Of Exchanging Integrity Metadata --------------------------------------------------------------------------- - - To enable integrity exchange on a block device the gendisk must be - registered as capable: - - `int blk_integrity_register(gendisk, blk_integrity);` - - The blk_integrity struct is a template and should contain the - following:: - - static struct blk_integrity my_profile = { - .name = "STANDARDSBODY-TYPE-VARIANT-CSUM", - .generate_fn = my_generate_fn, - .verify_fn = my_verify_fn, - .tuple_size = sizeof(struct my_tuple_size), - .tag_size = <tag bytes per hw sector>, - }; - - 'name' is a text string which will be visible in sysfs. This is - part of the userland API so chose it carefully and never change - it. The format is standards body-type-variant. - E.g. T10-DIF-TYPE1-IP or T13-EPP-0-CRC. - - 'generate_fn' generates appropriate integrity metadata (for WRITE). - - 'verify_fn' verifies that the data buffer matches the integrity - metadata. - - 'tuple_size' must be set to match the size of the integrity - metadata per sector. I.e. 8 for DIF and EPP. - - 'tag_size' must be set to identify how many bytes of tag space - are available per hardware sector. For DIF this is either 2 or - 0 depending on the value of the Control Mode Page ATO bit. - ---------------------------------------------------------------------- 2007-12-24 Martin K. Petersen <martin.petersen@oracle.com> diff --git a/Documentation/block/writeback_cache_control.rst b/Documentation/block/writeback_cache_control.rst index b208488d0aae..c3707d071780 100644 --- a/Documentation/block/writeback_cache_control.rst +++ b/Documentation/block/writeback_cache_control.rst @@ -46,41 +46,50 @@ worry if the underlying devices need any explicit cache flushing and how the Forced Unit Access is implemented. The REQ_PREFLUSH and REQ_FUA flags may both be set on a single bio. +Feature settings for block drivers +---------------------------------- -Implementation details for bio based block drivers --------------------------------------------------------------- +For devices that do not support volatile write caches there is no driver +support required, the block layer completes empty REQ_PREFLUSH requests before +entering the driver and strips off the REQ_PREFLUSH and REQ_FUA bits from +requests that have a payload. -These drivers will always see the REQ_PREFLUSH and REQ_FUA bits as they sit -directly below the submit_bio interface. For remapping drivers the REQ_FUA -bits need to be propagated to underlying devices, and a global flush needs -to be implemented for bios with the REQ_PREFLUSH bit set. For real device -drivers that do not have a volatile cache the REQ_PREFLUSH and REQ_FUA bits -on non-empty bios can simply be ignored, and REQ_PREFLUSH requests without -data can be completed successfully without doing any work. Drivers for -devices with volatile caches need to implement the support for these -flags themselves without any help from the block layer. +For devices with volatile write caches the driver needs to tell the block layer +that it supports flushing caches by setting the + BLK_FEAT_WRITE_CACHE -Implementation details for request_fn based block drivers ---------------------------------------------------------- +flag in the queue_limits feature field. For devices that also support the FUA +bit the block layer needs to be told to pass on the REQ_FUA bit by also setting +the -For devices that do not support volatile write caches there is no driver -support required, the block layer completes empty REQ_PREFLUSH requests before -entering the driver and strips off the REQ_PREFLUSH and REQ_FUA bits from -requests that have a payload. For devices with volatile write caches the -driver needs to tell the block layer that it supports flushing caches by -doing:: + BLK_FEAT_FUA + +flag in the features field of the queue_limits structure. + +Implementation details for bio based block drivers +-------------------------------------------------- + +For bio based drivers the REQ_PREFLUSH and REQ_FUA bit are simply passed on to +the driver if the driver sets the BLK_FEAT_WRITE_CACHE flag and the driver +needs to handle them. + +*NOTE*: The REQ_FUA bit also gets passed on when the BLK_FEAT_FUA flags is +_not_ set. Any bio based driver that sets BLK_FEAT_WRITE_CACHE also needs to +handle REQ_FUA. - blk_queue_write_cache(sdkp->disk->queue, true, false); +For remapping drivers the REQ_FUA bits need to be propagated to underlying +devices, and a global flush needs to be implemented for bios with the +REQ_PREFLUSH bit set. -and handle empty REQ_OP_FLUSH requests in its prep_fn/request_fn. Note that -REQ_PREFLUSH requests with a payload are automatically turned into a sequence -of an empty REQ_OP_FLUSH request followed by the actual write by the block -layer. For devices that also support the FUA bit the block layer needs -to be told to pass through the REQ_FUA bit using:: +Implementation details for blk-mq drivers +----------------------------------------- - blk_queue_write_cache(sdkp->disk->queue, true, true); +When the BLK_FEAT_WRITE_CACHE flag is set, REQ_OP_WRITE | REQ_PREFLUSH requests +with a payload are automatically turned into a sequence of a REQ_OP_FLUSH +request followed by the actual write by the block layer. -and the driver must handle write requests that have the REQ_FUA bit set -in prep_fn/request_fn. If the FUA bit is not natively supported the block -layer turns it into an empty REQ_OP_FLUSH request after the actual write. +When the BLK_FEAT_FUA flags is set, the REQ_FUA bit is simply passed on for the +REQ_OP_WRITE request, else a REQ_OP_FLUSH request is sent by the block layer +after the completion of the write request for bio submissions with the REQ_FUA +bit set. diff --git a/Documentation/bpf/libbpf/libbpf_overview.rst b/Documentation/bpf/libbpf/libbpf_overview.rst index f36a2d4ffea2..f4d22f0c62b0 100644 --- a/Documentation/bpf/libbpf/libbpf_overview.rst +++ b/Documentation/bpf/libbpf/libbpf_overview.rst @@ -219,6 +219,14 @@ compilation and skeleton generation. Using Libbpf-rs will make building user space part of the BPF application easier. Note that the BPF program themselves must still be written in plain C. +libbpf logging +============== + +By default, libbpf logs informational and warning messages to stderr. The +verbosity of these messages can be controlled by setting the environment +variable LIBBPF_LOG_LEVEL to either warn, info, or debug. A custom log +callback can be set using ``libbpf_set_print()``. + Additional Documentation ======================== diff --git a/Documentation/bpf/standardization/abi.rst b/Documentation/bpf/standardization/abi.rst index 0c2e10eeb89a..41514137cb7b 100644 --- a/Documentation/bpf/standardization/abi.rst +++ b/Documentation/bpf/standardization/abi.rst @@ -23,3 +23,6 @@ The BPF calling convention is defined as: R0 - R5 are scratch registers and BPF programs needs to spill/fill them if necessary across calls. + +The BPF program needs to store the return value into register R0 before doing an +``EXIT``. diff --git a/Documentation/bpf/standardization/instruction-set.rst b/Documentation/bpf/standardization/instruction-set.rst index 00c93eb42613..ab820d565052 100644 --- a/Documentation/bpf/standardization/instruction-set.rst +++ b/Documentation/bpf/standardization/instruction-set.rst @@ -5,15 +5,29 @@ BPF Instruction Set Architecture (ISA) ====================================== -eBPF (which is no longer an acronym for anything), also commonly +eBPF, also commonly referred to as BPF, is a technology with origins in the Linux kernel that can run untrusted programs in a privileged context such as an operating system kernel. This document specifies the BPF instruction set architecture (ISA). +As a historical note, BPF originally stood for Berkeley Packet Filter, +but now that it can do so much more than packet filtering, the acronym +no longer makes sense. BPF is now considered a standalone term that +does not stand for anything. The original BPF is sometimes referred to +as cBPF (classic BPF) to distinguish it from the now widely deployed +eBPF (extended BPF). + Documentation conventions ========================= +The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", +"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and +"OPTIONAL" in this document are to be interpreted as described in +BCP 14 `<https://www.rfc-editor.org/info/rfc2119>`_ +`<https://www.rfc-editor.org/info/rfc8174>`_ +when, and only when, they appear in all capitals, as shown here. + For brevity and consistency, this document refers to families of types using a shorthand syntax and refers to several expository, mnemonic functions when describing the semantics of instructions. @@ -25,7 +39,7 @@ Types This document refers to integer types with the notation `SN` to specify a type's signedness (`S`) and bit width (`N`), respectively. -.. table:: Meaning of signedness notation. +.. table:: Meaning of signedness notation ==== ========= S Meaning @@ -34,7 +48,7 @@ a type's signedness (`S`) and bit width (`N`), respectively. s signed ==== ========= -.. table:: Meaning of bit-width notation. +.. table:: Meaning of bit-width notation ===== ========= N Bit width @@ -52,24 +66,18 @@ numbers. Functions --------- -* htobe16: Takes an unsigned 16-bit number in host-endian format and - returns the equivalent number as an unsigned 16-bit number in big-endian - format. -* htobe32: Takes an unsigned 32-bit number in host-endian format and - returns the equivalent number as an unsigned 32-bit number in big-endian - format. -* htobe64: Takes an unsigned 64-bit number in host-endian format and - returns the equivalent number as an unsigned 64-bit number in big-endian - format. -* htole16: Takes an unsigned 16-bit number in host-endian format and - returns the equivalent number as an unsigned 16-bit number in little-endian - format. -* htole32: Takes an unsigned 32-bit number in host-endian format and - returns the equivalent number as an unsigned 32-bit number in little-endian - format. -* htole64: Takes an unsigned 64-bit number in host-endian format and - returns the equivalent number as an unsigned 64-bit number in little-endian - format. + +The following byteswap functions are direction-agnostic. That is, +the same function is used for conversion in either direction discussed +below. + +* be16: Takes an unsigned 16-bit number and converts it between + host byte order and big-endian + (`IEN137 <https://www.rfc-editor.org/ien/ien137.txt>`_) byte order. +* be32: Takes an unsigned 32-bit number and converts it between + host byte order and big-endian byte order. +* be64: Takes an unsigned 64-bit number and converts it between + host byte order and big-endian byte order. * bswap16: Takes an unsigned 16-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness. @@ -79,7 +87,12 @@ Functions * bswap64: Takes an unsigned 64-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness. - +* le16: Takes an unsigned 16-bit number and converts it between + host byte order and little-endian byte order. +* le32: Takes an unsigned 32-bit number and converts it between + host byte order and little-endian byte order. +* le64: Takes an unsigned 64-bit number and converts it between + host byte order and little-endian byte order. Definitions ----------- @@ -106,9 +119,9 @@ Conformance groups An implementation does not need to support all instructions specified in this document (e.g., deprecated instructions). Instead, a number of conformance -groups are specified. An implementation must support the base32 conformance -group and may support additional conformance groups, where supporting a -conformance group means it must support all instructions in that conformance +groups are specified. An implementation MUST support the base32 conformance +group and MAY support additional conformance groups, where supporting a +conformance group means it MUST support all instructions in that conformance group. The use of named conformance groups enables interoperability between a runtime @@ -209,7 +222,7 @@ For example:: 07 1 0 00 00 11 22 33 44 r1 += 0x11223344 // big Note that most instructions do not use all of the fields. -Unused fields shall be cleared to zero. +Unused fields SHALL be cleared to zero. Wide instruction encoding -------------------------- @@ -256,18 +269,20 @@ Instruction classes The three least significant bits of the 'opcode' field store the instruction class: -===== ===== =============================== =================================== -class value description reference -===== ===== =============================== =================================== -LD 0x0 non-standard load operations `Load and store instructions`_ -LDX 0x1 load into register operations `Load and store instructions`_ -ST 0x2 store from immediate operations `Load and store instructions`_ -STX 0x3 store from register operations `Load and store instructions`_ -ALU 0x4 32-bit arithmetic operations `Arithmetic and jump instructions`_ -JMP 0x5 64-bit jump operations `Arithmetic and jump instructions`_ -JMP32 0x6 32-bit jump operations `Arithmetic and jump instructions`_ -ALU64 0x7 64-bit arithmetic operations `Arithmetic and jump instructions`_ -===== ===== =============================== =================================== +.. table:: Instruction class + + ===== ===== =============================== =================================== + class value description reference + ===== ===== =============================== =================================== + LD 0x0 non-standard load operations `Load and store instructions`_ + LDX 0x1 load into register operations `Load and store instructions`_ + ST 0x2 store from immediate operations `Load and store instructions`_ + STX 0x3 store from register operations `Load and store instructions`_ + ALU 0x4 32-bit arithmetic operations `Arithmetic and jump instructions`_ + JMP 0x5 64-bit jump operations `Arithmetic and jump instructions`_ + JMP32 0x6 32-bit jump operations `Arithmetic and jump instructions`_ + ALU64 0x7 64-bit arithmetic operations `Arithmetic and jump instructions`_ + ===== ===== =============================== =================================== Arithmetic and jump instructions ================================ @@ -285,12 +300,14 @@ For arithmetic and jump instructions (``ALU``, ``ALU64``, ``JMP`` and **s (source)** the source operand location, which unless otherwise specified is one of: - ====== ===== ============================================== - source value description - ====== ===== ============================================== - K 0 use 32-bit 'imm' value as source operand - X 1 use 'src_reg' register value as source operand - ====== ===== ============================================== + .. table:: Source operand location + + ====== ===== ============================================== + source value description + ====== ===== ============================================== + K 0 use 32-bit 'imm' value as source operand + X 1 use 'src_reg' register value as source operand + ====== ===== ============================================== **instruction class** the instruction class (see `Instruction classes`_) @@ -305,27 +322,29 @@ The 'code' field encodes the operation as below, where 'src' refers to the the source operand and 'dst' refers to the value of the destination register. -===== ===== ======= ========================================================== -name code offset description -===== ===== ======= ========================================================== -ADD 0x0 0 dst += src -SUB 0x1 0 dst -= src -MUL 0x2 0 dst \*= src -DIV 0x3 0 dst = (src != 0) ? (dst / src) : 0 -SDIV 0x3 1 dst = (src != 0) ? (dst s/ src) : 0 -OR 0x4 0 dst \|= src -AND 0x5 0 dst &= src -LSH 0x6 0 dst <<= (src & mask) -RSH 0x7 0 dst >>= (src & mask) -NEG 0x8 0 dst = -dst -MOD 0x9 0 dst = (src != 0) ? (dst % src) : dst -SMOD 0x9 1 dst = (src != 0) ? (dst s% src) : dst -XOR 0xa 0 dst ^= src -MOV 0xb 0 dst = src -MOVSX 0xb 8/16/32 dst = (s8,s16,s32)src -ARSH 0xc 0 :term:`sign extending<Sign Extend>` dst >>= (src & mask) -END 0xd 0 byte swap operations (see `Byte swap instructions`_ below) -===== ===== ======= ========================================================== +.. table:: Arithmetic instructions + + ===== ===== ======= ========================================================== + name code offset description + ===== ===== ======= ========================================================== + ADD 0x0 0 dst += src + SUB 0x1 0 dst -= src + MUL 0x2 0 dst \*= src + DIV 0x3 0 dst = (src != 0) ? (dst / src) : 0 + SDIV 0x3 1 dst = (src != 0) ? (dst s/ src) : 0 + OR 0x4 0 dst \|= src + AND 0x5 0 dst &= src + LSH 0x6 0 dst <<= (src & mask) + RSH 0x7 0 dst >>= (src & mask) + NEG 0x8 0 dst = -dst + MOD 0x9 0 dst = (src != 0) ? (dst % src) : dst + SMOD 0x9 1 dst = (src != 0) ? (dst s% src) : dst + XOR 0xa 0 dst ^= src + MOV 0xb 0 dst = src + MOVSX 0xb 8/16/32 dst = (s8,s16,s32)src + ARSH 0xc 0 :term:`sign extending<Sign Extend>` dst >>= (src & mask) + END 0xd 0 byte swap operations (see `Byte swap instructions`_ below) + ===== ===== ======= ========================================================== Underflow and overflow are allowed during arithmetic operations, meaning the 64-bit or 32-bit value will wrap. If BPF program execution would @@ -374,7 +393,7 @@ interpreted as a 64-bit signed value. Note that there are varying definitions of the signed modulo operation when the dividend or divisor are negative, where implementations often vary by language such that Python, Ruby, etc. differ from C, Go, Java, -etc. This specification requires that signed modulo use truncated division +etc. This specification requires that signed modulo MUST use truncated division (where -13 % 3 == -1) as implemented in C, Go, etc.:: a % n = a - n * trunc(a / n) @@ -386,6 +405,19 @@ The ``MOVSX`` instruction does a move operation with sign extension. operands into 64-bit operands. Unlike other arithmetic instructions, ``MOVSX`` is only defined for register source operands (``X``). +``{MOV, K, ALU64}`` means:: + + dst = (s64)imm + +``{MOV, X, ALU}`` means:: + + dst = (u32)src + +``{MOVSX, X, ALU}`` with 'offset' 8 means:: + + dst = (u32)(s32)(s8)src + + The ``NEG`` instruction is only defined when the source bit is clear (``K``). @@ -404,15 +436,17 @@ only and do not use a separate source register or immediate value. For ``ALU``, the 1-bit source operand field in the opcode is used to select what byte order the operation converts from or to. For ``ALU64``, the 1-bit source operand field in the opcode is reserved -and must be set to 0. +and MUST be set to 0. + +.. table:: Byte swap instructions -===== ======== ===== ================================================= -class source value description -===== ======== ===== ================================================= -ALU TO_LE 0 convert between host byte order and little endian -ALU TO_BE 1 convert between host byte order and big endian -ALU64 Reserved 0 do byte swap unconditionally -===== ======== ===== ================================================= + ===== ======== ===== ================================================= + class source value description + ===== ======== ===== ================================================= + ALU LE 0 convert between host byte order and little endian + ALU BE 1 convert between host byte order and big endian + ALU64 Reserved 0 do byte swap unconditionally + ===== ======== ===== ================================================= The 'imm' field encodes the width of the swap operations. The following widths are supported: 16, 32 and 64. Width 64 operations belong to the base64 @@ -421,19 +455,19 @@ conformance group. Examples: -``{END, TO_LE, ALU}`` with 'imm' = 16/32/64 means:: +``{END, LE, ALU}`` with 'imm' = 16/32/64 means:: - dst = htole16(dst) - dst = htole32(dst) - dst = htole64(dst) + dst = le16(dst) + dst = le32(dst) + dst = le64(dst) -``{END, TO_BE, ALU}`` with 'imm' = 16/32/64 means:: +``{END, BE, ALU}`` with 'imm' = 16/32/64 means:: - dst = htobe16(dst) - dst = htobe32(dst) - dst = htobe64(dst) + dst = be16(dst) + dst = be32(dst) + dst = be64(dst) -``{END, TO_LE, ALU64}`` with 'imm' = 16/32/64 means:: +``{END, TO, ALU64}`` with 'imm' = 16/32/64 means:: dst = bswap16(dst) dst = bswap32(dst) @@ -448,27 +482,29 @@ otherwise identical operations, and indicates the base64 conformance group unless otherwise specified. The 'code' field encodes the operation as below: -======== ===== ======= ================================= =================================================== -code value src_reg description notes -======== ===== ======= ================================= =================================================== -JA 0x0 0x0 PC += offset {JA, K, JMP} only -JA 0x0 0x0 PC += imm {JA, K, JMP32} only -JEQ 0x1 any PC += offset if dst == src -JGT 0x2 any PC += offset if dst > src unsigned -JGE 0x3 any PC += offset if dst >= src unsigned -JSET 0x4 any PC += offset if dst & src -JNE 0x5 any PC += offset if dst != src -JSGT 0x6 any PC += offset if dst > src signed -JSGE 0x7 any PC += offset if dst >= src signed -CALL 0x8 0x0 call helper function by static ID {CALL, K, JMP} only, see `Helper functions`_ -CALL 0x8 0x1 call PC += imm {CALL, K, JMP} only, see `Program-local functions`_ -CALL 0x8 0x2 call helper function by BTF ID {CALL, K, JMP} only, see `Helper functions`_ -EXIT 0x9 0x0 return {CALL, K, JMP} only -JLT 0xa any PC += offset if dst < src unsigned -JLE 0xb any PC += offset if dst <= src unsigned -JSLT 0xc any PC += offset if dst < src signed -JSLE 0xd any PC += offset if dst <= src signed -======== ===== ======= ================================= =================================================== +.. table:: Jump instructions + + ======== ===== ======= ================================= =================================================== + code value src_reg description notes + ======== ===== ======= ================================= =================================================== + JA 0x0 0x0 PC += offset {JA, K, JMP} only + JA 0x0 0x0 PC += imm {JA, K, JMP32} only + JEQ 0x1 any PC += offset if dst == src + JGT 0x2 any PC += offset if dst > src unsigned + JGE 0x3 any PC += offset if dst >= src unsigned + JSET 0x4 any PC += offset if dst & src + JNE 0x5 any PC += offset if dst != src + JSGT 0x6 any PC += offset if dst > src signed + JSGE 0x7 any PC += offset if dst >= src signed + CALL 0x8 0x0 call helper function by static ID {CALL, K, JMP} only, see `Helper functions`_ + CALL 0x8 0x1 call PC += imm {CALL, K, JMP} only, see `Program-local functions`_ + CALL 0x8 0x2 call helper function by BTF ID {CALL, K, JMP} only, see `Helper functions`_ + EXIT 0x9 0x0 return {CALL, K, JMP} only + JLT 0xa any PC += offset if dst < src unsigned + JLE 0xb any PC += offset if dst <= src unsigned + JSLT 0xc any PC += offset if dst < src signed + JSLE 0xd any PC += offset if dst <= src signed + ======== ===== ======= ================================= =================================================== where 'PC' denotes the program counter, and the offset to increment by is in units of 64-bit instructions relative to the instruction following @@ -476,9 +512,6 @@ the jump instruction. Thus 'PC += 1' skips execution of the next instruction if it's a basic instruction or results in undefined behavior if the next instruction is a 128-bit wide instruction. -The BPF program needs to store the return value into register R0 before doing an -``EXIT``. - Example: ``{JSGE, X, JMP32}`` means:: @@ -487,6 +520,10 @@ Example: where 's>=' indicates a signed '>=' comparison. +``{JLE, K, JMP}`` means:: + + if dst <= (u64)(s64)imm goto +offset + ``{JA, K, JMP32}`` means:: gotol +imm @@ -510,19 +547,25 @@ Helper functions are a concept whereby BPF programs can call into a set of function calls exposed by the underlying platform. Historically, each helper function was identified by a static ID -encoded in the 'imm' field. The available helper functions may differ -for each program type, but static IDs are unique across all program types. +encoded in the 'imm' field. Further documentation of helper functions +is outside the scope of this document and standardization is left for +future work, but use is widely deployed and more information can be +found in platform-specific documentation (e.g., Linux kernel documentation). Platforms that support the BPF Type Format (BTF) support identifying a helper function by a BTF ID encoded in the 'imm' field, where the BTF ID -identifies the helper name and type. +identifies the helper name and type. Further documentation of BTF +is outside the scope of this document and standardization is left for +future work, but use is widely deployed and more information can be +found in platform-specific documentation (e.g., Linux kernel documentation). Program-local functions ~~~~~~~~~~~~~~~~~~~~~~~ Program-local functions are functions exposed by the same BPF program as the -caller, and are referenced by offset from the call instruction, similar to -``JA``. The offset is encoded in the 'imm' field of the call instruction. -An ``EXIT`` within the program-local function will return to the caller. +caller, and are referenced by offset from the instruction following the call +instruction, similar to ``JA``. The offset is encoded in the 'imm' field of +the call instruction. An ``EXIT`` within the program-local function will +return to the caller. Load and store instructions =========================== @@ -537,6 +580,8 @@ For load and store instructions (``LD``, ``LDX``, ``ST``, and ``STX``), the **mode** The mode modifier is one of: + .. table:: Mode modifier + ============= ===== ==================================== ============= mode modifier value description reference ============= ===== ==================================== ============= @@ -551,6 +596,8 @@ For load and store instructions (``LD``, ``LDX``, ``ST``, and ``STX``), the **sz (size)** The size modifier is one of: + .. table:: Size modifier + ==== ===== ===================== size value description ==== ===== ===================== @@ -619,14 +666,16 @@ The 'imm' field is used to encode the actual atomic operation. Simple atomic operation use a subset of the values defined to encode arithmetic operations in the 'imm' field to encode the atomic operation: -======== ===== =========== -imm value description -======== ===== =========== -ADD 0x00 atomic add -OR 0x40 atomic or -AND 0x50 atomic and -XOR 0xa0 atomic xor -======== ===== =========== +.. table:: Simple atomic operations + + ======== ===== =========== + imm value description + ======== ===== =========== + ADD 0x00 atomic add + OR 0x40 atomic or + AND 0x50 atomic and + XOR 0xa0 atomic xor + ======== ===== =========== ``{ATOMIC, W, STX}`` with 'imm' = ADD means:: @@ -640,13 +689,15 @@ XOR 0xa0 atomic xor In addition to the simple atomic operations, there also is a modifier and two complex atomic operations: -=========== ================ =========================== -imm value description -=========== ================ =========================== -FETCH 0x01 modifier: return old value -XCHG 0xe0 | FETCH atomic exchange -CMPXCHG 0xf0 | FETCH atomic compare and exchange -=========== ================ =========================== +.. table:: Complex atomic operations + + =========== ================ =========================== + imm value description + =========== ================ =========================== + FETCH 0x01 modifier: return old value + XCHG 0xe0 | FETCH atomic exchange + CMPXCHG 0xf0 | FETCH atomic compare and exchange + =========== ================ =========================== The ``FETCH`` modifier is optional for simple atomic operations, and always set for the complex atomic operations. If the ``FETCH`` flag @@ -673,17 +724,19 @@ The following table defines a set of ``{IMM, DW, LD}`` instructions with opcode subtypes in the 'src_reg' field, using new terms such as "map" defined further below: -======= ========================================= =========== ============== -src_reg pseudocode imm type dst type -======= ========================================= =========== ============== -0x0 dst = (next_imm << 32) | imm integer integer -0x1 dst = map_by_fd(imm) map fd map -0x2 dst = map_val(map_by_fd(imm)) + next_imm map fd data address -0x3 dst = var_addr(imm) variable id data address -0x4 dst = code_addr(imm) integer code address -0x5 dst = map_by_idx(imm) map index map -0x6 dst = map_val(map_by_idx(imm)) + next_imm map index data address -======= ========================================= =========== ============== +.. table:: 64-bit immediate instructions + + ======= ========================================= =========== ============== + src_reg pseudocode imm type dst type + ======= ========================================= =========== ============== + 0x0 dst = (next_imm << 32) | imm integer integer + 0x1 dst = map_by_fd(imm) map fd map + 0x2 dst = map_val(map_by_fd(imm)) + next_imm map fd data address + 0x3 dst = var_addr(imm) variable id data address + 0x4 dst = code_addr(imm) integer code address + 0x5 dst = map_by_idx(imm) map index map + 0x6 dst = map_val(map_by_idx(imm)) + next_imm map index data address + ======= ========================================= =========== ============== where @@ -725,5 +778,5 @@ carried over from classic BPF. These instructions used an instruction class of ``LD``, a size modifier of ``W``, ``H``, or ``B``, and a mode modifier of ``ABS`` or ``IND``. The 'dst_reg' and 'offset' fields were set to zero, and 'src_reg' was set to zero for ``ABS``. However, these -instructions are deprecated and should no longer be used. All legacy packet +instructions are deprecated and SHOULD no longer be used. All legacy packet access instructions belong to the "packet" conformance group. diff --git a/Documentation/core-api/genericirq.rst b/Documentation/core-api/genericirq.rst index 4a460639ab1c..25f94dfd66fa 100644 --- a/Documentation/core-api/genericirq.rst +++ b/Documentation/core-api/genericirq.rst @@ -210,7 +210,7 @@ implemented (simplified excerpt):: } } - noop(struct irq_data *data)) + noop(struct irq_data *data) { } @@ -410,6 +410,8 @@ which are used in the generic IRQ layer. .. kernel-doc:: include/linux/interrupt.h :internal: +.. kernel-doc:: include/linux/irqdomain.h + Public Functions Provided ========================= diff --git a/Documentation/core-api/memory-allocation.rst b/Documentation/core-api/memory-allocation.rst index 1c58d883b273..8b84eb4bdae7 100644 --- a/Documentation/core-api/memory-allocation.rst +++ b/Documentation/core-api/memory-allocation.rst @@ -144,8 +144,10 @@ configuration, but it is a good practice to use `kmalloc` for objects smaller than page size. The address of a chunk allocated with `kmalloc` is aligned to at least -ARCH_KMALLOC_MINALIGN bytes. For sizes which are a power of two, the -alignment is also guaranteed to be at least the respective size. +ARCH_KMALLOC_MINALIGN bytes. For sizes which are a power of two, the +alignment is also guaranteed to be at least the respective size. For other +sizes, the alignment is guaranteed to be at least the largest power-of-two +divisor of the size. Chunks allocated with kmalloc() can be resized with krealloc(). Similarly to kmalloc_array(): a helper for resizing arrays is provided in the form of diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst index 6b5f7e6e7155..c16ca163b55e 100644 --- a/Documentation/core-api/pin_user_pages.rst +++ b/Documentation/core-api/pin_user_pages.rst @@ -132,7 +132,7 @@ CASE 1: Direct IO (DIO) ----------------------- There are GUP references to pages that are serving as DIO buffers. These buffers are needed for a relatively short time (so they -are not "long term"). No special synchronization with page_mkclean() or +are not "long term"). No special synchronization with folio_mkclean() or munmap() is provided. Therefore, flags to set at the call site are: :: FOLL_PIN @@ -144,7 +144,7 @@ CASE 2: RDMA ------------ There are GUP references to pages that are serving as DMA buffers. These buffers are needed for a long time ("long term"). No special -synchronization with page_mkclean() or munmap() is provided. Therefore, flags +synchronization with folio_mkclean() or munmap() is provided. Therefore, flags to set at the call site are: :: FOLL_PIN | FOLL_LONGTERM @@ -170,7 +170,7 @@ callback, simply remove the range from the device's page tables. Either way, as long as the driver unpins the pages upon mmu notifier callback, then there is proper synchronization with both filesystem and mm -(page_mkclean(), munmap(), etc). Therefore, neither flag needs to be set. +(folio_mkclean(), munmap(), etc). Therefore, neither flag needs to be set. CASE 4: Pinning for struct page manipulation only ------------------------------------------------- @@ -196,20 +196,20 @@ INCORRECT (uses FOLL_GET calls): write to the data within the pages put_page() -page_maybe_dma_pinned(): the whole point of pinning -=================================================== +folio_maybe_dma_pinned(): the whole point of pinning +==================================================== -The whole point of marking pages as "DMA-pinned" or "gup-pinned" is to be able -to query, "is this page DMA-pinned?" That allows code such as page_mkclean() +The whole point of marking folios as "DMA-pinned" or "gup-pinned" is to be able +to query, "is this folio DMA-pinned?" That allows code such as folio_mkclean() (and file system writeback code in general) to make informed decisions about -what to do when a page cannot be unmapped due to such pins. +what to do when a folio cannot be unmapped due to such pins. What to do in those cases is the subject of a years-long series of discussions and debates (see the References at the end of this document). It's a TODO item here: fill in the details once that's worked out. Meanwhile, it's safe to say that having this available: :: - static inline bool page_maybe_dma_pinned(struct page *page) + static inline bool folio_maybe_dma_pinned(struct folio *folio) ...is a prerequisite to solving the long-running gup+DMA problem. diff --git a/Documentation/crypto/async-tx-api.rst b/Documentation/crypto/async-tx-api.rst index 27c146b54d71..f88a7809385e 100644 --- a/Documentation/crypto/async-tx-api.rst +++ b/Documentation/crypto/async-tx-api.rst @@ -150,38 +150,38 @@ of an operation. Perform a xor->copy->xor operation where each operation depends on the result from the previous operation:: - void callback(void *param) - { - struct completion *cmp = param; + #include <linux/async_tx.h> - complete(cmp); + static void callback(void *param) + { + complete(param); } - void run_xor_copy_xor(struct page **xor_srcs, - int xor_src_cnt, - struct page *xor_dest, - size_t xor_len, - struct page *copy_src, - struct page *copy_dest, - size_t copy_len) + #define NDISKS 2 + + static void run_xor_copy_xor(struct page **xor_srcs, + struct page *xor_dest, + size_t xor_len, + struct page *copy_src, + struct page *copy_dest, + size_t copy_len) { struct dma_async_tx_descriptor *tx; - addr_conv_t addr_conv[xor_src_cnt]; struct async_submit_ctl submit; addr_conv_t addr_conv[NDISKS]; struct completion cmp; init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL, addr_conv); - tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit) + tx = async_xor(xor_dest, xor_srcs, 0, NDISKS, xor_len, &submit); - submit->depend_tx = tx; + submit.depend_tx = tx; tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, &submit); init_completion(&cmp); init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST | ASYNC_TX_ACK, tx, callback, &cmp, addr_conv); - tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit); + tx = async_xor(xor_dest, xor_srcs, 0, NDISKS, xor_len, &submit); async_tx_issue_pending_all(); diff --git a/Documentation/process/clang-format.rst b/Documentation/dev-tools/clang-format.rst index 1d089a847c1b..1d089a847c1b 100644 --- a/Documentation/process/clang-format.rst +++ b/Documentation/dev-tools/clang-format.rst diff --git a/Documentation/dev-tools/gpio-sloppy-logic-analyzer.rst b/Documentation/dev-tools/gpio-sloppy-logic-analyzer.rst new file mode 100644 index 000000000000..d69f24c0d9e1 --- /dev/null +++ b/Documentation/dev-tools/gpio-sloppy-logic-analyzer.rst @@ -0,0 +1,93 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================= +Linux Kernel GPIO based sloppy logic analyzer +============================================= + +:Author: Wolfram Sang + +Introduction +============ + +This document briefly describes how to run the GPIO based in-kernel sloppy +logic analyzer running on an isolated CPU. + +The sloppy logic analyzer will utilize a few GPIO lines in input mode on a +system to rapidly sample these digital lines, which will, if the Nyquist +criteria is met, result in a time series log with approximate waveforms as they +appeared on these lines. One way to use it is to analyze external traffic +connected to these GPIO lines with wires (i.e. digital probes), acting as a +common logic analyzer. + +Another feature is to snoop on on-chip peripherals if the I/O cells of these +peripherals can be used in GPIO input mode at the same time as they are being +used as inputs or outputs for the peripheral. That means you could e.g. snoop +I2C traffic without any wiring (if your hardware supports it). In the pin +control subsystem such pin controllers are called "non-strict": a certain pin +can be used with a certain peripheral and as a GPIO input line at the same +time. + +Note that this is a last resort analyzer which can be affected by latencies, +non-deterministic code paths and non-maskable interrupts. It is called 'sloppy' +for a reason. However, for e.g. remote development, it may be useful to get a +first view and aid further debugging. + +Setup +===== + +Your kernel must have CONFIG_DEBUG_FS and CONFIG_CPUSETS enabled. Ideally, your +runtime environment does not utilize cpusets otherwise, then isolation of a CPU +core is easiest. If you do need cpusets, check that helper script for the +sloppy logic analyzer does not interfere with your other settings. + +Tell the kernel which GPIOs are used as probes. For a Device Tree based system, +you need to use the following bindings. Because these bindings are only for +debugging, there is no official schema:: + + i2c-analyzer { + compatible = "gpio-sloppy-logic-analyzer"; + probe-gpios = <&gpio6 21 GPIO_OPEN_DRAIN>, <&gpio6 4 GPIO_OPEN_DRAIN>; + probe-names = "SCL", "SDA"; + }; + +Note that you must provide a name for every GPIO specified. Currently a +maximum of 8 probes are supported. 32 are likely possible but are not +implemented yet. + +Usage +===== + +The logic analyzer is configurable via files in debugfs. However, it is +strongly recommended to not use them directly, but to use the script +``tools/gpio/gpio-sloppy-logic-analyzer``. Besides checking parameters more +extensively, it will isolate the CPU core so you will have the least +disturbance while measuring. + +The script has a help option explaining the parameters. For the above DT +snippet which analyzes an I2C bus at 400kHz on a Renesas Salvator-XS board, the +following settings are used: The isolated CPU shall be CPU1 because it is a big +core in a big.LITTLE setup. Because CPU1 is the default, we don't need a +parameter. The bus speed is 400kHz. So, the sampling theorem says we need to +sample at least at 800kHz. However, falling edges of both signals in an I2C +start condition happen faster, so we need a higher sampling frequency, e.g. +``-s 1500000`` for 1.5MHz. Also, we don't want to sample right away but wait +for a start condition on an idle bus. So, we need to set a trigger to a falling +edge on SDA while SCL stays high, i.e. ``-t 1H+2F``. Last is the duration, let +us assume 15ms here which results in the parameter ``-d 15000``. So, +altogether:: + + gpio-sloppy-logic-analyzer -s 1500000 -t 1H+2F -d 15000 + +Note that the process will return you back to the prompt but a sub-process is +still sampling in the background. Unless this has finished, you will not find a +result file in the current or specified directory. For the above example, we +will then need to trigger I2C communication:: + + i2cdetect -y -r <your bus number> + +Result is a .sr file to be consumed with PulseView or sigrok-cli from the free +`sigrok`_ project. It is a zip file which also contains the binary sample data +which may be consumed by other software. The filename is the logic analyzer +instance name plus a since-epoch timestamp. + +.. _sigrok: https://sigrok.org/ diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst index efa49cdc8e2e..53d4d124f9c5 100644 --- a/Documentation/dev-tools/index.rst +++ b/Documentation/dev-tools/index.rst @@ -16,6 +16,7 @@ Documentation/dev-tools/testing-overview.rst testing-overview checkpatch + clang-format coccinelle sparse kcov @@ -32,6 +33,7 @@ Documentation/dev-tools/testing-overview.rst kunit/index ktap checkuapi + gpio-sloppy-logic-analyzer .. only:: subproject and html diff --git a/Documentation/dev-tools/kmsan.rst b/Documentation/dev-tools/kmsan.rst index 323eedad53cd..6a48d96c5c85 100644 --- a/Documentation/dev-tools/kmsan.rst +++ b/Documentation/dev-tools/kmsan.rst @@ -110,6 +110,13 @@ in the Makefile. Think of this as applying ``__no_sanitize_memory`` to every function in the file or directory. Most users won't need KMSAN_SANITIZE, unless their code gets broken by KMSAN (e.g. runs at early boot time). +KMSAN checks can also be temporarily disabled for the current task using +``kmsan_disable_current()`` and ``kmsan_enable_current()`` calls. Each +``kmsan_enable_current()`` call must be preceded by a +``kmsan_disable_current()`` call; these call pairs may be nested. One needs to +be careful with these calls, keeping the regions short and preferring other +ways to disable instrumentation, where possible. + Support ======= @@ -338,11 +345,11 @@ Per-task KMSAN state ~~~~~~~~~~~~~~~~~~~~ Every task_struct has an associated KMSAN task state that holds the KMSAN -context (see above) and a per-task flag disallowing KMSAN reports:: +context (see above) and a per-task counter disallowing KMSAN reports:: struct kmsan_context { ... - bool allow_reporting; + unsigned int depth; struct kmsan_context_state cstate; ... } diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index dcf634e411bd..f3766e326d1e 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -228,6 +228,13 @@ In general, the rules for selftests are * Don't cause the top-level "make run_tests" to fail if your feature is unconfigured. + * The output of tests must conform to the TAP standard to ensure high + testing quality and to capture failures/errors with specific details. + The kselftest.h and kselftest_harness.h headers provide wrappers for + outputting test results. These wrappers should be used for pass, + fail, exit, and skip messages. CI systems can easily parse TAP output + messages to detect test results. + Contributing new tests (details) ================================ diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml index 3292c669ee11..7c38c08dbf3f 100644 --- a/Documentation/devicetree/bindings/arm/airoha.yaml +++ b/Documentation/devicetree/bindings/arm/airoha.yaml @@ -22,6 +22,10 @@ properties: - enum: - airoha,en7523-evb - const: airoha,en7523 + - items: + - enum: + - airoha,en7581-evb + - const: airoha,en7581 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index a374b98080fe..0647851ae1f5 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -91,6 +91,7 @@ properties: - libretech,aml-s905x-cc - libretech,aml-s905x-cc-v2 - nexbox,a95x + - osmc,vero4k - const: amlogic,s905x - const: amlogic,meson-gxl @@ -107,6 +108,13 @@ properties: - const: amlogic,s905d - const: amlogic,meson-gxl + - description: Boards with the Amlogic Meson GXLX S905L SoC + items: + - enum: + - amlogic,p271 + - const: amlogic,s905l + - const: amlogic,meson-gxlx + - description: Boards with the Amlogic Meson GXM S912 SoC items: - enum: @@ -169,6 +177,8 @@ properties: - azw,gtking - azw,gtking-pro - bananapi,bpi-m2s + - dream,dreambox-one + - dream,dreambox-two - hardkernel,odroid-go-ultra - hardkernel,odroid-n2 - hardkernel,odroid-n2l diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt deleted file mode 100644 index 101dc21014ec..000000000000 --- a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt +++ /dev/null @@ -1,20 +0,0 @@ -Amlogic Meson8 and Meson8b "analog top" registers: --------------------------------------------------- - -The analog top registers contain information about the so-called -"metal revision" (which encodes the "minor version") of the SoC. - -Required properties: -- reg: the register range of the analog top registers -- compatible: depending on the SoC this should be one of: - - "amlogic,meson8-analog-top" - - "amlogic,meson8b-analog-top" - along with "syscon" - - -Example: - - analog_top: analog-top@81a8 { - compatible = "amlogic,meson8-analog-top", "syscon"; - reg = <0x81a8 0x14>; - }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt deleted file mode 100644 index 7656812b67b9..000000000000 --- a/Documentation/devicetree/bindings/arm/amlogic/assist.txt +++ /dev/null @@ -1,17 +0,0 @@ -Amlogic Meson6/Meson8/Meson8b assist registers: ------------------------------------------------ - -The assist registers contain basic information about the SoC, -for example the encoded SoC part number. - -Required properties: -- reg: the register range of the assist registers -- compatible: should be "amlogic,meson-mx-assist" along with "syscon" - - -Example: - - assist: assist@7c00 { - compatible = "amlogic,meson-mx-assist", "syscon"; - reg = <0x7c00 0x200>; - }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt deleted file mode 100644 index 407e27f230ab..000000000000 --- a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt +++ /dev/null @@ -1,17 +0,0 @@ -Amlogic Meson6/Meson8/Meson8b bootrom: --------------------------------------- - -The bootrom register area can be used to access SoC specific -information, such as the "misc version". - -Required properties: -- reg: the register range of the bootrom registers -- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon" - - -Example: - - bootrom: bootrom@d9040000 { - compatible = "amlogic,meson-mx-bootrom", "syscon"; - reg = <0xd9040000 0x10000>; - }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt deleted file mode 100644 index 72f8d08198b6..000000000000 --- a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt +++ /dev/null @@ -1,18 +0,0 @@ -Amlogic Meson8 and Meson8b power-management-unit: -------------------------------------------------- - -The pmu is used to turn off and on different power domains of the SoCs -This includes the power to the CPU cores. - -Required node properties: -- compatible value : depending on the SoC this should be one of: - "amlogic,meson8-pmu" - "amlogic,meson8b-pmu" -- reg : physical base address and the size of the registers window - -Example: - - pmu@c81000e4 { - compatible = "amlogic,meson8b-pmu", "syscon"; - reg = <0xc81000e0 0x18>; - }; diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml index c960c8e0a9a5..08b89b62c505 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml @@ -30,7 +30,7 @@ description: | maintainers: - Mike Leach <mike.leach@linaro.org> - Suzuki K Poulose <suzuki.poulose@arm.com> - - James Clark <james.clark@arm.com> + - James Clark <james.clark@linaro.org> - Mao Jinlong <quic_jinlmao@quicinc.com> - Hao Zhang <quic_hazha@quicinc.com> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml index 6745b4cc8f1c..d50a60368e27 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml @@ -29,7 +29,7 @@ description: | maintainers: - Mike Leach <mike.leach@linaro.org> - Suzuki K Poulose <suzuki.poulose@arm.com> - - James Clark <james.clark@arm.com> + - James Clark <james.clark@linaro.org> - Mao Jinlong <quic_jinlmao@quicinc.com> - Hao Zhang <quic_hazha@quicinc.com> diff --git a/Documentation/devicetree/bindings/arm/arm,juno-fpga-apb-regs.yaml b/Documentation/devicetree/bindings/arm/arm,juno-fpga-apb-regs.yaml new file mode 100644 index 000000000000..ce5f2e1ec1ea --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,juno-fpga-apb-regs.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,juno-fpga-apb-regs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Juno FPGA APB Registers + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + +properties: + compatible: + items: + - const: arm,juno-fpga-apb-regs + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + "^led@[0-9a-f]+,[0-9a-f]$": + $ref: /schemas/leds/register-bit-led.yaml# + +required: + - compatible + - reg + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000 { + compatible = "arm,juno-fpga-apb-regs", "syscon", "simple-mfd"; + reg = <0x010000 0x1000>; + ranges = <0x0 0x10000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + led@8,0 { + compatible = "register-bit-led"; + reg = <0x08 0x04>; + offset = <0x08>; + mask = <0x01>; + label = "vexpress:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index 67a66bf74895..7374beb5a613 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -41,35 +41,6 @@ Examples: reg = <0xffffe800 0x200>; }; -RAMC PHY Controller required properties: -- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon" -- reg: Should contain registers location and length - -Example: - - ddr3phy: ddr3phy@e3804000 { - compatible = "microchip,sama7g5-ddr3phy", "syscon"; - reg = <0xe3804000 0x1000>; -}; - -Special Function Registers (SFR) - -Special Function Registers (SFR) manage specific aspects of the integrated -memory, bridge implementations, processor and other functionality not controlled -elsewhere. - -required properties: -- compatible: Should be "atmel,<chip>-sfr", "syscon" or - "atmel,<chip>-sfrbu", "syscon" - <chip> can be "sama5d3", "sama5d4" or "sama5d2". - It also can be "microchip,sam9x60-sfr", "syscon". -- reg: Should contain registers location and length - - sfr@f0038000 { - compatible = "atmel,sama5d3-sfr", "syscon"; - reg = <0xf0038000 0x60>; - }; - Security Module (SECUMOD) The Security Module macrocell provides all necessary secure functions to avoid diff --git a/Documentation/devicetree/bindings/arm/axis.txt b/Documentation/devicetree/bindings/arm/axis.txt index ae345e1c8d2b..ebd33a88776f 100644 --- a/Documentation/devicetree/bindings/arm/axis.txt +++ b/Documentation/devicetree/bindings/arm/axis.txt @@ -7,22 +7,6 @@ ARTPEC-6 ARM SoC Required root node properties: - compatible = "axis,artpec6"; -ARTPEC-6 System Controller --------------------------- - -The ARTPEC-6 has a system controller with mixed functions controlling DMA, PCIe -and resets. - -Required properties: -- compatible: "axis,artpec6-syscon", "syscon" -- reg: Address and length of the register bank. - -Example: - syscon { - compatible = "axis,artpec6-syscon", "syscon"; - reg = <0xf8000000 0x48>; - }; - ARTPEC-6 Development board: --------------------------- Required root node properties: diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml index 162a39dab218..e4ff71f006b8 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -23,6 +23,12 @@ properties: - raspberrypi,4-model-b - const: brcm,bcm2711 + - description: BCM2712 based Boards + items: + - enum: + - raspberrypi,5-model-b + - const: brcm,bcm2712 + - description: BCM2835 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp index 35e5afb6d9ad..cc7b1402a31f 100644 --- a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp @@ -27,16 +27,6 @@ Properties: - reg : Offset and length of the register set for the device -* Alpine System-Fabric Service Registers - -The System-Fabric Service Registers allow various operation on CPU and -system fabric, like powering CPUs off. - -Properties: -- compatible : Should contain "al,alpine-sysfabric-service" and "syscon". -- reg : Offset and length of the register set for the device - - Example: cpus { diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index cc5a21b47e26..f308ff6c3532 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -147,6 +147,7 @@ properties: - arm,cortex-a710 - arm,cortex-a715 - arm,cortex-a720 + - arm,cortex-a725 - arm,cortex-m0 - arm,cortex-m0+ - arm,cortex-m1 @@ -161,10 +162,15 @@ properties: - arm,cortex-x2 - arm,cortex-x3 - arm,cortex-x4 + - arm,cortex-x925 - arm,neoverse-e1 - arm,neoverse-n1 - arm,neoverse-n2 + - arm,neoverse-n3 - arm,neoverse-v1 + - arm,neoverse-v2 + - arm,neoverse-v3 + - arm,neoverse-v3ae - brcm,brahma-b15 - brcm,brahma-b53 - brcm,vulcan diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml index 526f508cb98d..bd39cf107f3e 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX7ULP System Integration Module maintainers: - - Anson Huang <anson.huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> description: | The system integration module (SIM) provides system control and chip configuration diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt deleted file mode 100644 index 44aa3c451ccf..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt +++ /dev/null @@ -1,14 +0,0 @@ -Freescale Vybrid Miscellaneous System Control - CPU Configuration - -The MSCM IP contains multiple sub modules, this binding describes the first -block of registers which contains CPU configuration information. - -Required properties: -- compatible: "fsl,vf610-mscm-cpucfg", "syscon" -- reg: the register range of the MSCM CPU configuration registers - -Example: - mscm_cpucfg: cpucfg@40001000 { - compatible = "fsl,vf610-mscm-cpucfg", "syscon"; - reg = <0x40001000 0x800>; - } diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 6d185d09cb6a..80747d79418a 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -8,7 +8,6 @@ title: Freescale i.MX Platforms maintainers: - Shawn Guo <shawnguo@kernel.org> - - Li Yang <leoyang.li@nxp.com> properties: $nodename: @@ -363,6 +362,12 @@ properties: - const: gw,ventana - const: fsl,imx6q + - description: i.MX6Q Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0 + items: + - const: kontron,imx6q-samx6i-ads2 + - const: kontron,imx6q-samx6i + - const: fsl,imx6q + - description: i.MX6Q PHYTEC phyBOARD-Mira items: - enum: @@ -544,6 +549,12 @@ properties: - const: gw,ventana - const: fsl,imx6dl + - description: i.MX6DL Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0 + items: + - const: kontron,imx6dl-samx6i-ads2 + - const: kontron,imx6dl-samx6i + - const: fsl,imx6dl + - description: i.MX6DL PHYTEC phyBOARD-Mira items: - enum: @@ -946,6 +957,13 @@ properties: - prt,prt8mm # i.MX8MM Protonic PRT8MM Board - const: fsl,imx8mm + - description: Compulab i.MX8MM UCM SoM based boards + items: + - enum: + - compulab,imx8mm-iot-gateway # i.MX8MM Compulab IoT-Gateway + - const: compulab,imx8mm-ucm-som # i.MX8MM Compulab UCM SoM + - const: fsl,imx8mm + - description: Emtop i.MX8MM based Boards items: - const: ees,imx8mm-emtop-baseboard # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1 @@ -1145,8 +1163,9 @@ properties: version as an industrial computing device. items: - enum: - - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL - - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM + - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL + - tq,imx8mp-tqma8mpql-mba8mp-ras314 # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MP-RAS314 + - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM - const: fsl,imx8mp - description: i.MX8MQ based Boards @@ -1272,9 +1291,16 @@ properties: - description: i.MX93 based Boards items: - enum: + - fsl,imx93-9x9-qsb # i.MX93 9x9 QSB Board - fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board - const: fsl,imx93 + - description: i.MX95 based Boards + items: + - enum: + - fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board + - const: fsl,imx95 + - description: i.MXRT1050 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index 7f06b1080244..25a2b42105e5 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -20,7 +20,7 @@ description: | initialized early into boot process and provides services to Operating Systems on multiple processors including ones running Linux. - See http://processors.wiki.ti.com/index.php/TISCI for protocol definition. + See https://software-dl.ti.com/tisci/esd/latest/index.html for protocol definition. The TI-SCI node describes the Texas Instrument's System Controller entity node. This parent node may optionally have additional children nodes which describe diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml index 16d2e132d3d1..538d91be8857 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -82,4 +82,22 @@ properties: - const: marvell,armada-ap807-quad - const: marvell,armada-ap807 + - description: + SolidRun CN9130 SoM based single-board computers + items: + - enum: + - solidrun,cn9130-clearfog-base + - solidrun,cn9130-clearfog-pro + - solidrun,cn9131-solidwan + - const: solidrun,cn9130-sr-som + - const: marvell,cn9130 + + - description: + SolidRun CN9132 COM-Express Type 7 based single-board computers + items: + - enum: + - solidrun,cn9132-clearfog + - const: solidrun,cn9132-sr-cex7 + - const: marvell,cn9130 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt index aaaf64c56e44..e10e8525eabd 100644 --- a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt +++ b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt @@ -5,18 +5,3 @@ Boards with a Marvell Dove SoC shall have the following properties: Required root node property: - compatible: must contain "marvell,dove"; - -* Global Configuration registers - -Global Configuration registers of Dove SoC are shared by a syscon node. - -Required properties: -- compatible: must contain "marvell,dove-global-config" and "syscon". -- reg: base address and size of the Global Configuration registers. - -Example: - -gconf: global-config@e802c { - compatible = "marvell,dove-global-config", "syscon"; - reg = <0xe802c 0x14>; -}; diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 09f9ffd3ff7b..1d4bb50fcd8d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -85,12 +85,15 @@ properties: - const: mediatek,mt7629 - items: - enum: + - cudy,wr3000-v1 + - openwrt,one - xiaomi,ax3000t - const: mediatek,mt7981b - items: - enum: - acelink,ew-7886cax - bananapi,bpi-r3 + - bananapi,bpi-r3mini - mediatek,mt7986a-rfb - const: mediatek,mt7986a - items: @@ -293,6 +296,13 @@ properties: - const: google,tentacruel-sku327683 - const: google,tentacruel - const: mediatek,mt8186 + - description: Google Voltorb (Acer Chromebook 311 C723/C732T) + items: + - enum: + - google,voltorb-sku589824 + - google,voltorb-sku589825 + - const: google,voltorb + - const: mediatek,mt8186 - items: - enum: - mediatek,mt8186-evb @@ -342,6 +352,14 @@ properties: - const: google,tomato-rev3 - const: google,tomato - const: mediatek,mt8195 + - description: HP Dojo sku1, 3, 5, 7 (HP Chromebook x360 13b-ca0002sa) + items: + - const: google,dojo-sku7 + - const: google,dojo-sku5 + - const: google,dojo-sku3 + - const: google,dojo-sku1 + - const: google,dojo + - const: mediatek,mt8195 - items: - enum: - mediatek,mt8195-demo @@ -353,6 +371,12 @@ properties: - const: mediatek,mt8365 - items: - enum: + - mediatek,mt8390-evk + - const: mediatek,mt8390 + - const: mediatek,mt8188 + - items: + - enum: + - kontron,3-5-sbc-i1200 - mediatek,mt8395-evk - radxa,nio-12l - const: mediatek,mt8395 diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 99b5e9530707..528544d0a161 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -53,14 +53,20 @@ properties: - arm,cortex-a710-pmu - arm,cortex-a715-pmu - arm,cortex-a720-pmu + - arm,cortex-a725-pmu - arm,cortex-x1-pmu - arm,cortex-x2-pmu - arm,cortex-x3-pmu - arm,cortex-x4-pmu + - arm,cortex-x925-pmu - arm,neoverse-e1-pmu - arm,neoverse-n1-pmu - arm,neoverse-n2-pmu + - arm,neoverse-n3-pmu - arm,neoverse-v1-pmu + - arm,neoverse-v2-pmu + - arm,neoverse-v3-pmu + - arm,neoverse-v3ae-pmu - brcm,vulcan-pmu - cavium,thunder-pmu - nvidia,denver-pmu diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index ae885414b181..f08e13b61172 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -42,6 +42,7 @@ description: | msm8996 msm8998 qcs404 + qcs8550 qcm2290 qcm6490 qdu1000 @@ -96,6 +97,7 @@ properties: - items: - enum: - qcom,apq8016-sbc + - schneider,apq8016-hmibsc - const: qcom,apq8016 - items: @@ -104,6 +106,7 @@ properties: - huawei,sturgeon - lg,lenok - samsung,matisse-wifi + - samsung,milletwifi - const: qcom,apq8026 - items: @@ -138,6 +141,7 @@ properties: - microsoft,makepeace - microsoft,moneypenny - motorola,falcon + - samsung,ms013g - samsung,s3ve3g - const: qcom,msm8226 @@ -175,6 +179,7 @@ properties: - items: - enum: - lge,hammerhead + - samsung,hlte - sony,xperia-amami - sony,xperia-honami - const: qcom,msm8974 @@ -182,8 +187,10 @@ properties: - items: - enum: - fairphone,fp2 + - htc,m8 - oneplus,bacon - samsung,klte + - sony,xperia-aries - sony,xperia-castor - sony,xperia-leo - const: qcom,msm8974pro @@ -203,8 +210,13 @@ properties: - asus,z00l - gplus,fl8005a - huawei,g7 + - lg,c50 + - lg,m216 - longcheer,l8910 - longcheer,l8150 + - motorola,harpia + - motorola,osprey + - motorola,surnia - qcom,msm8916-mtp - samsung,a3u-eur - samsung,a5u-eur @@ -316,6 +328,7 @@ properties: - items: - enum: - qcom,ipq5018-rdp432-c2 + - tplink,archer-ax55-v1 - const: qcom,ipq5018 - items: @@ -366,6 +379,7 @@ properties: - fairphone,fp5 - qcom,qcm6490-idp - qcom,qcs6490-rb3gen2 + - shift,otter - const: qcom,qcm6490 - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform @@ -802,6 +816,7 @@ properties: - items: - enum: + - lenovo,tbx605f - motorola,ali - const: qcom,sdm450 @@ -883,6 +898,7 @@ properties: - items: - enum: - qcom,sa8775p-ride + - qcom,sa8775p-ride-r3 - const: qcom,sa8775p - items: @@ -1004,17 +1020,28 @@ properties: - qcom,sm8550-hdk - qcom,sm8550-mtp - qcom,sm8550-qrd + - samsung,q5q - sony,pdx234 - const: qcom,sm8550 - items: - enum: + - qcom,qcs8550-aim300-aiot + - const: qcom,qcs8550-aim300 + - const: qcom,qcs8550 + - const: qcom,sm8550 + + - items: + - enum: + - qcom,sm8650-hdk - qcom,sm8650-mtp - qcom,sm8650-qrd - const: qcom,sm8650 - items: - enum: + - asus,vivobook-s15 + - lenovo,yoga-slim7x - qcom,x1e80100-crd - qcom,x1e80100-qcp - const: qcom,x1e80100 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index e04c213a0dee..1ef09fbfdfaf 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -248,6 +248,13 @@ properties: - const: friendlyarm,nanopc-t6 - const: rockchip,rk3588 + - description: FriendlyElec CM3588-based boards + items: + - enum: + - friendlyarm,cm3588-nas + - const: friendlyarm,cm3588 + - const: rockchip,rk3588 + - description: GameForce Chi items: - const: gameforce,chi @@ -627,6 +634,11 @@ properties: - const: mqmaker,miqi - const: rockchip,rk3288 + - description: Neardi LBA3368 + items: + - const: neardi,lba3368 + - const: rockchip,rk3368 + - description: Netxeon R89 board items: - const: netxeon,r89 @@ -799,11 +811,21 @@ properties: - const: radxa,rock3a - const: rockchip,rk3568 + - description: Radxa ROCK 3B + items: + - const: radxa,rock-3b + - const: rockchip,rk3568 + - description: Radxa ROCK 3C items: - const: radxa,rock-3c - const: rockchip,rk3566 + - description: Radxa ROCK 5 ITX + items: + - const: radxa,rock-5-itx + - const: rockchip,rk3588 + - description: Radxa ROCK 5A items: - const: radxa,rock-5a @@ -814,6 +836,18 @@ properties: - const: radxa,rock-5b - const: rockchip,rk3588 + - description: Radxa ROCK S0 + items: + - const: radxa,rock-s0 + - const: rockchip,rk3308 + + - description: Radxa ZERO 3W/3E + items: + - enum: + - radxa,zero-3e + - radxa,zero-3w + - const: rockchip,rk3566 + - description: Rikomagic MK808 v1 items: - const: rikomagic,mk808 @@ -959,6 +993,14 @@ properties: - const: wolfvision,rk3568-pf5 - const: rockchip,rk3568 + - description: Xunlong Orange Pi 3B + items: + - enum: + - xunlong,orangepi-3b-v1.1 + - xunlong,orangepi-3b-v2.1 + - const: xunlong,orangepi-3b + - const: rockchip,rk3566 + - description: Xunlong Orange Pi 5 Plus items: - const: xunlong,orangepi-5-plus diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt deleted file mode 100644 index 3b8fbf3c00c5..000000000000 --- a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt +++ /dev/null @@ -1,19 +0,0 @@ -ARM Dual Cluster System Configuration Block -------------------------------------------- - -The Dual Cluster System Configuration Block (DCSCB) provides basic -functionality for controlling clocks, resets and configuration pins in -the Dual Cluster System implemented by the Real-Time System Model (RTSM). - -Required properties: - -- compatible : should be "arm,rtsm,dcscb" - -- reg : physical base address and the size of the registers window - -Example: - - dcscb@60000000 { - compatible = "arm,rtsm,dcscb"; - reg = <0x60000000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt deleted file mode 100644 index e404e2556b4a..000000000000 --- a/Documentation/devicetree/bindings/arm/spear-misc.txt +++ /dev/null @@ -1,9 +0,0 @@ -SPEAr Misc configuration -=========================== -SPEAr SOCs have some miscellaneous registers which are used to configure -few properties of different peripheral controllers. - -misc node required properties: - -- compatible Should be "st,spear1340-misc", "syscon". -- reg: Address range of misc space up to 8K diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index bc2f43330ae4..58099949e8f3 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -59,6 +59,12 @@ properties: - prt,prtt1s # Protonic PRTT1S - const: st,stm32mp151 + - description: DH STM32MP135 DHCOR SoM based Boards + items: + - const: dh,stm32mp135f-dhcor-dhsbc + - const: dh,stm32mp135f-dhcor-som + - const: st,stm32mp135 + - description: DH STM32MP151 DHCOR SoM based Boards items: - const: dh,stm32mp151a-dhcor-testbench diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index c2a158b75e49..09dc6f424986 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -708,12 +708,12 @@ properties: - const: olimex,a64-teres-i - const: allwinner,sun50i-a64 - - description: Pine64 + - description: Pine64 PINE A64 items: - const: pine64,pine64 - const: allwinner,sun50i-a64 - - description: Pine64+ + - description: Pine64 PINE A64+ items: - const: pine64,pine64-plus - const: allwinner,sun50i-a64 @@ -724,17 +724,17 @@ properties: - const: sochip,s3 - const: allwinner,sun8i-v3 - - description: Pine64 PineH64 model A + - description: Pine64 PINE H64 Model A items: - const: pine64,pine-h64 - const: allwinner,sun50i-h6 - - description: Pine64 PineH64 model B + - description: Pine64 PINE H64 Model B items: - const: pine64,pine-h64-model-b - const: allwinner,sun50i-h6 - - description: Pine64 LTS + - description: Pine64 PINE A64 LTS items: - const: pine64,pine64-lts - const: allwinner,sun50i-r18 @@ -763,17 +763,17 @@ properties: - const: pine64,pinephone - const: allwinner,sun50i-a64 - - description: Pine64 PineTab, Development Sample + - description: Pine64 PineTab Developer Sample items: - const: pine64,pinetab - const: allwinner,sun50i-a64 - - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones) + - description: Pine64 PineTab Early Adopter items: - const: pine64,pinetab-early-adopter - const: allwinner,sun50i-a64 - - description: Pine64 SoPine Baseboard + - description: Pine64 SOPINE items: - const: pine64,sopine-baseboard - const: pine64,sopine diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 52b51fd7044e..4d9c5fbb4c26 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -25,6 +25,12 @@ properties: - ti,am62a7-sk - const: ti,am62a7 + - description: K3 AM62A7 SoC PHYTEC phyBOARD-Lyra + items: + - const: phytec,am62a7-phyboard-lyra-rdk + - const: phytec,am62a-phycore-som + - const: ti,am62a7 + - description: K3 AM62P5 SoC and Boards items: - enum: diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt deleted file mode 100644 index 7c3ca0e13de0..000000000000 --- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +++ /dev/null @@ -1,21 +0,0 @@ -Binding for Freescale QorIQ AHCI SATA Controller - -Required properties: - - reg: Physical base address and size of the controller's register area. - - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where - chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc. - - clocks: Input clock specifier. Refer to common clock bindings. - - interrupts: Interrupt specifier. Refer to interrupt binding. - -Optional properties: - - dma-coherent: Enable AHCI coherent DMA operation. - - reg-names: register area names when there are more than 1 register area. - -Examples: - sata@3200000 { - compatible = "fsl,ls1021a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; - dma-coherent; - }; diff --git a/Documentation/devicetree/bindings/ata/fsl,ahci.yaml b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml new file mode 100644 index 000000000000..ea4428bc1742 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/fsl,ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QorIQ AHCI SATA Controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - description: SATA controller for ls1012a + items: + - const: fsl,ls1012a-ahci + - const: fsl,ls1043a-ahci + - enum: + - fsl,ls1021a-ahci + - fsl,ls1028a-ahci + - fsl,ls1043a-ahci + - fsl,ls1046a-ahci + - fsl,ls1088a-ahci + - fsl,ls2080a-ahci + - fsl,lx2160a-ahci + + reg: + minItems: 1 + maxItems: 2 + + reg-names: + items: + - const: ahci + - const: sata-ecc + minItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sata@3200000 { + compatible = "fsl,ls1021a-ahci"; + reg = <0x3200000 0x10000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + dma-coherent; + }; diff --git a/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml index b5e5767d8698..13eaa8d9a16e 100644 --- a/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml +++ b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml @@ -35,6 +35,9 @@ properties: ports-implemented: const: 1 + power-domains: + maxItems: 1 + sata-port@0: $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index 07ccbda4a0ab..68ea5f70b75f 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -21,6 +21,7 @@ properties: compatible: enum: - qcom,qdu1000-llcc + - qcom,sa8775p-llcc - qcom,sc7180-llcc - qcom,sc7280-llcc - qcom,sc8180x-llcc @@ -66,7 +67,6 @@ allOf: compatible: contains: enum: - - qcom,qdu1000-llcc - qcom,sc7180-llcc - qcom,sm6350-llcc then: @@ -85,6 +85,33 @@ allOf: compatible: contains: enum: + - qcom,sa8775p-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + - description: LLCC1 base register region + - description: LLCC2 base register region + - description: LLCC3 base register region + - description: LLCC4 base register region + - description: LLCC5 base register region + - description: LLCC broadcast base register region + reg-names: + items: + - const: llcc0_base + - const: llcc1_base + - const: llcc2_base + - const: llcc3_base + - const: llcc4_base + - const: llcc5_base + - const: llcc_broadcast_base + + - if: + properties: + compatible: + contains: + enum: - qcom,sc7280-llcc then: properties: @@ -104,6 +131,7 @@ allOf: compatible: contains: enum: + - qcom,qdu1000-llcc - qcom,sc8180x-llcc - qcom,sc8280xp-llcc - qcom,x1e80100-llcc @@ -141,8 +169,31 @@ allOf: - qcom,sm8150-llcc - qcom,sm8250-llcc - qcom,sm8350-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + - description: LLCC1 base register region + - description: LLCC2 base register region + - description: LLCC3 base register region + - description: LLCC broadcast base register region + reg-names: + items: + - const: llcc0_base + - const: llcc1_base + - const: llcc2_base + - const: llcc3_base + - const: llcc_broadcast_base + + - if: + properties: + compatible: + contains: + enum: - qcom,sm8450-llcc - qcom,sm8550-llcc + - qcom,sm8650-llcc then: properties: reg: @@ -151,7 +202,8 @@ allOf: - description: LLCC1 base register region - description: LLCC2 base register region - description: LLCC3 base register region - - description: LLCC broadcast base register region + - description: LLCC broadcast OR register region + - description: LLCC broadcast AND register region reg-names: items: - const: llcc0_base @@ -159,6 +211,7 @@ allOf: - const: llcc2_base - const: llcc3_base - const: llcc_broadcast_base + - const: llcc_broadcast_and_base additionalProperties: false diff --git a/Documentation/devicetree/bindings/cache/starfive,jh8100-starlink-cache.yaml b/Documentation/devicetree/bindings/cache/starfive,jh8100-starlink-cache.yaml new file mode 100644 index 000000000000..6d61098e388b --- /dev/null +++ b/Documentation/devicetree/bindings/cache/starfive,jh8100-starlink-cache.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cache/starfive,jh8100-starlink-cache.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive StarLink Cache Controller + +maintainers: + - Joshua Yeong <joshua.yeong@starfivetech.com> + +description: + StarFive's StarLink Cache Controller manages the L3 cache shared between + clusters of CPU cores. The cache driver enables RISC-V non-standard cache + management as an alternative to instructions in the RISC-V Zicbom extension. + +allOf: + - $ref: /schemas/cache-controller.yaml# + +# We need a select here so we don't match all nodes with 'cache' +select: + properties: + compatible: + contains: + enum: + - starfive,jh8100-starlink-cache + + required: + - compatible + +properties: + compatible: + items: + - const: starfive,jh8100-starlink-cache + - const: cache + + reg: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - cache-block-size + - cache-level + - cache-sets + - cache-size + - cache-unified + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + cache-controller@15000000 { + compatible = "starfive,jh8100-starlink-cache", "cache"; + reg = <0x0 0x15000000 0x0 0x278>; + cache-block-size = <64>; + cache-level = <3>; + cache-sets = <8192>; + cache-size = <0x400000>; + cache-unified; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml index 3f4266637733..84353fd09428 100644 --- a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml +++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml @@ -35,7 +35,7 @@ properties: reg: minItems: 2 - maxItems: 3 + maxItems: 4 "#clock-cells": description: @@ -43,6 +43,10 @@ properties: clocks. const: 1 + '#reset-cells': + description: ID of the controller reset line + const: 1 + required: - compatible - reg @@ -60,6 +64,8 @@ allOf: - description: scu base address - description: misc scu base address + '#reset-cells': false + - if: properties: compatible: @@ -70,6 +76,7 @@ allOf: items: - description: scu base address - description: misc scu base address + - description: reset base address - description: pb scu base address additionalProperties: false @@ -83,3 +90,19 @@ examples: <0x1fb00000 0x1000>; #clock-cells = <1>; }; + + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + scuclk: clock-controller@1fa20000 { + compatible = "airoha,en7581-scu"; + reg = <0x0 0x1fa20000 0x0 0x400>, + <0x0 0x1fb00000 0x0 0x90>, + <0x0 0x1fb00830 0x0 0x8>, + <0x0 0x1fbe3400 0x0 0xfc>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml index 6d84cee1bd75..2568ad7dd0ac 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml @@ -30,6 +30,8 @@ properties: - description: input fixed pll div7 - description: input hifi pll - description: input oscillator (usually at 24MHz) + - description: input sys pll + minItems: 6 # sys_pll is optional clock-names: items: @@ -39,6 +41,8 @@ properties: - const: fclk_div7 - const: hifi_pll - const: xtal + - const: sys_pll + minItems: 6 # sys_pll is optional required: - compatible @@ -65,9 +69,10 @@ examples: <&clkc_pll CLKID_FCLK_DIV5>, <&clkc_pll CLKID_FCLK_DIV7>, <&clkc_pll CLKID_HIFI_PLL>, - <&xtal>; + <&xtal>, + <&clkc_pll CLKID_SYS_PLL>; clock-names = "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7", - "hifi_pll", "xtal"; + "hifi_pll", "xtal", "sys_pll"; }; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml index a59b188a8bf5..c99274d2a9bd 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml @@ -26,11 +26,15 @@ properties: items: - description: input fixpll_in - description: input hifipll_in + - description: input syspll_in + minItems: 2 # syspll_in is optional clock-names: items: - const: fixpll_in - const: hifipll_in + - const: syspll_in + minItems: 2 # syspll_in is optional required: - compatible @@ -53,7 +57,8 @@ examples: reg = <0 0x7c80 0 0x18c>; #clock-cells = <1>; clocks = <&clkc_periphs CLKID_FIXPLL_IN>, - <&clkc_periphs CLKID_HIFIPLL_IN>; - clock-names = "fixpll_in", "hifipll_in"; + <&clkc_periphs CLKID_HIFIPLL_IN>, + <&clkc_periphs CLKID_SYSPLL_IN>; + clock-names = "fixpll_in", "hifipll_in", "syspll_in"; }; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt deleted file mode 100644 index 3a8948c04bc9..000000000000 --- a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Amlogic AXG Audio Clock Controllers - -The Amlogic AXG audio clock controller generates and supplies clock to the -other elements of the audio subsystem, such as fifos, i2s, spdif and pdm -devices. - -Required Properties: - -- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D, - "amlogic,g12a-audio-clkc" for G12A, - "amlogic,sm1-audio-clkc" for S905X3. -- reg : physical base address of the clock controller and length of - memory mapped region. -- clocks : a list of phandle + clock-specifier pairs for the clocks listed - in clock-names. -- clock-names : must contain the following: - * "pclk" - Main peripheral bus clock - may contain the following: - * "mst_in[0-7]" - 8 input plls to generate clock signals - * "slv_sclk[0-9]" - 10 slave bit clocks provided by external - components. - * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external - components. -- resets : phandle of the internal reset line -- #clock-cells : should be 1. -- #reset-cells : should be 1 on the g12a (and following) soc family - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be -used in device tree sources. - -Example: - -clkc_audio: clock-controller@0 { - compatible = "amlogic,axg-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - resets = <&reset RESET_AUDIO>; -}; diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.yaml new file mode 100644 index 000000000000..fd7982dd4cea --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,axg-audio-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic AXG Audio Clock Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Jerome Brunet <jbrunet@baylibre.com> + +description: + The Amlogic AXG audio clock controller generates and supplies clock to the + other elements of the audio subsystem, such as fifos, i2s, spdif and pdm + devices. + +properties: + compatible: + enum: + - amlogic,axg-audio-clkc + - amlogic,g12a-audio-clkc + - amlogic,sm1-audio-clkc + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: main peripheral bus clock + - description: input plls to generate clock signals N0 + - description: input plls to generate clock signals N1 + - description: input plls to generate clock signals N2 + - description: input plls to generate clock signals N3 + - description: input plls to generate clock signals N4 + - description: input plls to generate clock signals N5 + - description: input plls to generate clock signals N6 + - description: input plls to generate clock signals N7 + - description: slave bit clock N0 provided by external components + - description: slave bit clock N1 provided by external components + - description: slave bit clock N2 provided by external components + - description: slave bit clock N3 provided by external components + - description: slave bit clock N4 provided by external components + - description: slave bit clock N5 provided by external components + - description: slave bit clock N6 provided by external components + - description: slave bit clock N7 provided by external components + - description: slave bit clock N8 provided by external components + - description: slave bit clock N9 provided by external components + - description: slave sample clock N0 provided by external components + - description: slave sample clock N1 provided by external components + - description: slave sample clock N2 provided by external components + - description: slave sample clock N3 provided by external components + - description: slave sample clock N4 provided by external components + - description: slave sample clock N5 provided by external components + - description: slave sample clock N6 provided by external components + - description: slave sample clock N7 provided by external components + - description: slave sample clock N8 provided by external components + - description: slave sample clock N9 provided by external components + + clock-names: + minItems: 1 + items: + - const: pclk + - const: mst_in0 + - const: mst_in1 + - const: mst_in2 + - const: mst_in3 + - const: mst_in4 + - const: mst_in5 + - const: mst_in6 + - const: mst_in7 + - const: slv_sclk0 + - const: slv_sclk1 + - const: slv_sclk2 + - const: slv_sclk3 + - const: slv_sclk4 + - const: slv_sclk5 + - const: slv_sclk6 + - const: slv_sclk7 + - const: slv_sclk8 + - const: slv_sclk9 + - const: slv_lrclk0 + - const: slv_lrclk1 + - const: slv_lrclk2 + - const: slv_lrclk3 + - const: slv_lrclk4 + - const: slv_lrclk5 + - const: slv_lrclk6 + - const: slv_lrclk7 + - const: slv_lrclk8 + - const: slv_lrclk9 + + resets: + description: internal reset line + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + - resets + +allOf: + - if: + properties: + compatible: + contains: + enum: + - amlogic,g12a-audio-clkc + - amlogic,sm1-audio-clkc + then: + required: + - '#reset-cells' + else: + properties: + '#reset-cells': false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/axg-clkc.h> + #include <dt-bindings/reset/amlogic,meson-axg-reset.h> + apb { + #address-cells = <2>; + #size-cells = <2>; + + clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>, + <&slv_sclk0>, + <&slv_sclk1>, + <&slv_sclk2>, + <&slv_sclk3>, + <&slv_sclk4>, + <&slv_sclk5>, + <&slv_sclk6>, + <&slv_sclk7>, + <&slv_sclk8>, + <&slv_sclk9>, + <&slv_lrclk0>, + <&slv_lrclk1>, + <&slv_lrclk2>, + <&slv_lrclk3>, + <&slv_lrclk4>, + <&slv_lrclk5>, + <&slv_lrclk6>, + <&slv_lrclk7>, + <&slv_lrclk8>, + <&slv_lrclk9>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7", + "slv_sclk0", + "slv_sclk1", + "slv_sclk2", + "slv_sclk3", + "slv_sclk4", + "slv_sclk5", + "slv_sclk6", + "slv_sclk7", + "slv_sclk8", + "slv_sclk9", + "slv_lrclk0", + "slv_lrclk1", + "slv_lrclk2", + "slv_lrclk3", + "slv_lrclk4", + "slv_lrclk5", + "slv_lrclk6", + "slv_lrclk7", + "slv_lrclk8", + "slv_lrclk9"; + resets = <&reset RESET_AUDIO>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml new file mode 100644 index 000000000000..98e30b8c0529 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,c3-peripherals-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic C3 series Peripheral Clock Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Jerome Brunet <jbrunet@baylibre.com> + - Xianwei Zhao <xianwei.zhao@amlogic.com> + - Chuan Liu <chuan.liu@amlogic.com> + +properties: + compatible: + const: amlogic,c3-peripherals-clkc + + reg: + maxItems: 1 + + clocks: + minItems: 16 + items: + - description: input oscillator (usually at 24MHz) + - description: input oscillators multiplexer + - description: input fix pll + - description: input fclk div 2 + - description: input fclk div 2p5 + - description: input fclk div 3 + - description: input fclk div 4 + - description: input fclk div 5 + - description: input fclk div 7 + - description: input gp0 pll + - description: input gp1 pll + - description: input hifi pll + - description: input sys clk + - description: input axi clk + - description: input sys pll div 16 + - description: input cpu clk div 16 + - description: input pad clock for rtc clk (optional) + + clock-names: + minItems: 16 + items: + - const: xtal_24m + - const: oscin + - const: fix + - const: fdiv2 + - const: fdiv2p5 + - const: fdiv3 + - const: fdiv4 + - const: fdiv5 + - const: fdiv7 + - const: gp0 + - const: gp1 + - const: hifi + - const: sysclk + - const: axiclk + - const: sysplldiv16 + - const: cpudiv16 + - const: pad_osc + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@0 { + compatible = "amlogic,c3-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + #clock-cells = <1>; + clocks = <&xtal_24m>, + <&scmi_clk 8>, + <&scmi_clk 12>, + <&clkc_pll 3>, + <&clkc_pll 5>, + <&clkc_pll 7>, + <&clkc_pll 9>, + <&clkc_pll 11>, + <&clkc_pll 13>, + <&clkc_pll 15>, + <&scmi_clk 13>, + <&clkc_pll 17>, + <&scmi_clk 9>, + <&scmi_clk 10>, + <&scmi_clk 14>, + <&scmi_clk 15>; + clock-names = "xtal_24m", + "oscin", + "fix", + "fdiv2", + "fdiv2p5", + "fdiv3", + "fdiv4", + "fdiv5", + "fdiv7", + "gp0", + "gp1", + "hifi", + "sysclk", + "axiclk", + "sysplldiv16", + "cpudiv16"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml new file mode 100644 index 000000000000..43de3c6fc1cf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,c3-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic C3 series PLL Clock Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Jerome Brunet <jbrunet@baylibre.com> + - Chuan Liu <chuan.liu@amlogic.com> + - Xianwei Zhao <xianwei.zhao@amlogic.com> + +properties: + compatible: + const: amlogic,c3-pll-clkc + + reg: + maxItems: 1 + + clocks: + items: + - description: input top pll + - description: input mclk pll + + clock-names: + items: + - const: top + - const: mclk + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@8000 { + compatible = "amlogic,c3-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1a4>; + clocks = <&scmi_clk 2>, + <&scmi_clk 5>; + clock-names = "top", "mclk"; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/fsl,qoriq-clock-legacy.yaml b/Documentation/devicetree/bindings/clock/fsl,qoriq-clock-legacy.yaml new file mode 100644 index 000000000000..97b96a1a5825 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,qoriq-clock-legacy.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock-legacy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Legacy Clock Block on Freescale QorIQ Platforms + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + These nodes are deprecated. Kernels should continue to support + device trees with these nodes, but new device trees should not use them. + + Most of the bindings are from the common clock binding[1]. + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +properties: + compatible: + enum: + - fsl,qoriq-core-pll-1.0 + - fsl,qoriq-core-pll-2.0 + - fsl,qoriq-core-mux-1.0 + - fsl,qoriq-core-mux-2.0 + - fsl,qoriq-sysclk-1.0 + - fsl,qoriq-sysclk-2.0 + - fsl,qoriq-platform-pll-1.0 + - fsl,qoriq-platform-pll-2.0 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + clock-output-names: + minItems: 1 + maxItems: 8 + + '#clock-cells': + minimum: 0 + maximum: 1 + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,qoriq-sysclk-1.0 + - fsl,qoriq-sysclk-2.0 + then: + properties: + '#clock-cells': + const: 0 + + - if: + properties: + compatible: + contains: + enum: + - fsl,qoriq-core-pll-1.0 + - fsl,qoriq-core-pll-2.0 + then: + properties: + '#clock-cells': + const: 1 + description: | + * 0 - equal to the PLL frequency + * 1 - equal to the PLL frequency divided by 2 + * 2 - equal to the PLL frequency divided by 4 + diff --git a/Documentation/devicetree/bindings/clock/fsl,qoriq-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,qoriq-clock.yaml new file mode 100644 index 000000000000..95a3e3b24267 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,qoriq-clock.yaml @@ -0,0 +1,207 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock Block on Freescale QorIQ Platforms + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + Freescale QorIQ chips take primary clocking input from the external + SYSCLK signal. The SYSCLK input (frequency) is multiplied using + multiple phase locked loops (PLL) to create a variety of frequencies + which can then be passed to a variety of internal logic, including + cores and peripheral IP blocks. + Please refer to the Reference Manual for details. + + All references to "1.0" and "2.0" refer to the QorIQ chassis version to + which the chip complies. + + Chassis Version Example Chips + --------------- ------------- + 1.0 p4080, p5020, p5040 + 2.0 t4240 + + Clock Provider + + The clockgen node should act as a clock provider, though in older device + trees the children of the clockgen node are the clock providers. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,p2041-clockgen + - fsl,p3041-clockgen + - fsl,p4080-clockgen + - fsl,p5020-clockgen + - fsl,p5040-clockgen + - const: fsl,qoriq-clockgen-1.0 + - items: + - enum: + - fsl,t1023-clockgen + - fsl,t1024-clockgen + - fsl,t1040-clockgen + - fsl,t1042-clockgen + - fsl,t2080-clockgen + - fsl,t2081-clockgen + - fsl,t4240-clockgen + - const: fsl,qoriq-clockgen-2.0 + - items: + - enum: + - fsl,b4420-clockgen + - fsl,b4860-clockgen + - const: fsl,b4-clockgen + - items: + - enum: + - fsl,ls1012a-clockgen + - fsl,ls1021a-clockgen + - fsl,ls1028a-clockgen + - fsl,ls1043a-clockgen + - fsl,ls1046a-clockgen + - fsl,ls1088a-clockgen + - fsl,ls2080a-clockgen + - fsl,lx2160a-clockgen + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#clock-cells': + const: 2 + description: | + The first cell of the clock specifier is the clock type, and the + second cell is the clock index for the specified type. + + Type# Name Index Cell + 0 sysclk must be 0 + 1 cmux index (n in CLKCnCSR) + 2 hwaccel index (n in CLKCGnHWACSR) + 3 fman 0 for fm1, 1 for fm2 + 4 platform pll n=pll/(n+1). For example, when n=1, + that means output_freq=PLL_freq/2. + 5 coreclk must be 0 + + clock-frequency: + description: Input system clock frequency (SYSCLK) + + clocks: + items: + - description: + sysclk may be provided as an input clock. Either clock-frequency + or clocks must be provided. + - description: + A second input clock, called "coreclk", may be provided if + core PLLs are based on a different input clock from the + platform PLL. + minItems: 1 + + clock-names: + items: + - const: sysclk + - const: coreclk + +patternProperties: + '^mux[0-9]@[a-f0-9]+$': + deprecated: true + $ref: fsl,qoriq-clock-legacy.yaml + + '^sysclk(-[a-z0-9]+)?$': + deprecated: true + $ref: fsl,qoriq-clock-legacy.yaml + + '^pll[0-9]@[a-f0-9]+$': + deprecated: true + $ref: fsl,qoriq-clock-legacy.yaml + + '^platform\-pll@[a-f0-9]+$': + deprecated: true + $ref: fsl,qoriq-clock-legacy.yaml + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + /* clock provider example */ + global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + clock-frequency = <133333333>; + #clock-cells = <2>; + }; + + - | + /* Legacy example */ + global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + reg = <0xe1000 0x1000>; + ranges = <0x0 0xe1000 0x1000>; + clock-frequency = <133333333>; + #address-cells = <1>; + #size-cells = <1>; + #clock-cells = <2>; + + sysclk: sysclk { + compatible = "fsl,qoriq-sysclk-1.0"; + clock-output-names = "sysclk"; + #clock-cells = <0>; + }; + + pll0: pll0@800 { + compatible = "fsl,qoriq-core-pll-1.0"; + reg = <0x800 0x4>; + #clock-cells = <1>; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + compatible = "fsl,qoriq-core-pll-1.0"; + reg = <0x820 0x4>; + #clock-cells = <1>; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + compatible = "fsl,qoriq-core-mux-1.0"; + reg = <0x0 0x4>; + #clock-cells = <0>; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + compatible = "fsl,qoriq-core-mux-1.0"; + reg = <0x20 0x4>; + #clock-cells = <0>; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux1"; + }; + + platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml index bae4fcb3aacc..cd3c04c883df 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX6 Quad Clock Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Abel Vesa <abelvesa@kernel.org> + - Peng Fan <peng.fan@nxp.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml index c85ff6ea3d24..6713bbb14f30 100644 --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX6 SoloLite Clock Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Abel Vesa <abelvesa@kernel.org> + - Peng Fan <peng.fan@nxp.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml index 6b549ed1493c..6d64cf9463c9 100644 --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX6 SLL Clock Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Abel Vesa <abelvesa@kernel.org> + - Peng Fan <peng.fan@nxp.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml index 55dcad18b7c6..77afa4b81cf7 100644 --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX6 SoloX Clock Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Abel Vesa <abelvesa@kernel.org> + - Peng Fan <peng.fan@nxp.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml index be54d4df5afa..d57e18a210cc 100644 --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX6 UltraLite Clock Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Abel Vesa <abelvesa@kernel.org> + - Peng Fan <peng.fan@nxp.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml index e7d8427e4957..880d602d09f4 100644 --- a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml @@ -8,7 +8,6 @@ title: Freescale i.MX7 Dual Clock Controller maintainers: - Frank Li <Frank.Li@nxp.com> - - Anson Huang <Anson.Huang@nxp.com> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml index 80539f88bc27..c643d4a81478 100644 --- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP i.MX8M Family Clock Control Module maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Abel Vesa <abelvesa@kernel.org> + - Peng Fan <peng.fan@nxp.com> description: | NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml index c77111d10f90..9c3913f9092c 100644 --- a/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml +++ b/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml @@ -14,9 +14,11 @@ maintainers: properties: compatible: - enum: - - mediatek,mt7622-pciesys - - mediatek,mt7629-pciesys + oneOf: + - items: + - const: mediatek,mt7622-pciesys + - const: syscon + - const: mediatek,mt7629-pciesys reg: maxItems: 1 @@ -38,7 +40,7 @@ additionalProperties: false examples: - | clock-controller@1a100800 { - compatible = "mediatek,mt7622-pciesys"; + compatible = "mediatek,mt7622-pciesys", "syscon"; reg = <0x1a100800 0x1000>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml index 4cf8d3af9803..db13d51a4903 100644 --- a/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml +++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml @@ -39,6 +39,9 @@ properties: '#clock-cells': const: 1 + '#reset-cells': + const: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml index 0af1c569eb32..d786f1e2d007 100644 --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml @@ -40,38 +40,11 @@ required: additionalProperties: false examples: - # Clock controller node: - | - m10v-clk-ctrl@1d021000 { + clock-controller@1d021000 { compatible = "socionext,milbeaut-m10v-ccu"; reg = <0x1d021000 0x4000>; #clock-cells = <1>; clocks = <&clki40mhz>; }; - - # Required an external clock for Clock controller node: - - | - clocks { - clki40mhz: clki40mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; - /* other clocks */ - }; - - # The clock consumer shall specify the desired clock-output of the clock - # controller as below by specifying output-id in its "clk" phandle cell. - # 2: uart - # 4: 32-bit timer - # 7: UHS-I/II - - | - serial@1e700010 { - compatible = "socionext,milbeaut-usio-uart"; - reg = <0x1e700010 0x10>; - interrupts = <0 141 0x4>, <0 149 0x4>; - interrupt-names = "rx", "tx"; - clocks = <&clk 2>; - }; - ... diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml index 3cb996b2c9d5..ffae037779a1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml @@ -40,31 +40,19 @@ properties: - description: DSI 1 PLL byte clock - description: DSI 1 PLL DSI clock - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - power-domains: items: - description: MMCX power domain required: - compatible - - reg - clocks - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml index 8efac3fb159f..a584b4953e68 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml @@ -37,28 +37,16 @@ properties: - const: dp_phy_pll_link_clk - const: dp_phy_pll_vco_div_clk - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml index 59cc88a52f6b..53a5ab319159 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -27,6 +27,7 @@ properties: - qcom,sm8350-dispcc clocks: + minItems: 7 items: - description: Board XO source - description: Byte clock from DSI PHY0 @@ -35,8 +36,15 @@ properties: - description: Pixel clock from DSI PHY1 - description: Link clock from DP PHY - description: VCO DIV clock from DP PHY + - description: Link clock from eDP PHY + - description: VCO DIV clock from eDP PHY + - description: Link clock from DP1 PHY + - description: VCO DIV clock from DP1 PHY + - description: Link clock from DP2 PHY + - description: VCO DIV clock from DP2 PHY clock-names: + minItems: 7 items: - const: bi_tcxo - const: dsi0_phy_pll_out_byteclk @@ -45,18 +53,12 @@ properties: - const: dsi1_phy_pll_out_dsiclk - const: dp_phy_pll_link_clk - const: dp_phy_pll_vco_div_clk - - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 + - const: edp_phy_pll_link_clk + - const: edp_phy_pll_vco_div_clk + - const: dptx1_phy_pll_link_clk + - const: dptx1_phy_pll_vco_div_clk + - const: dptx2_phy_pll_link_clk + - const: dptx2_phy_pll_vco_div_clk power-domains: description: @@ -70,14 +72,26 @@ properties: required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + - if: + not: + properties: + compatible: + contains: + const: qcom,sc8180x-dispcc + then: + properties: + clocks: + maxItems: 7 + clock-names: + maxItems: 7 + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index 19211176ee0b..27df7e3e5bf3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -69,6 +69,8 @@ properties: const: 1 deprecated: true + '#power-domain-cells': false + required: - compatible @@ -81,7 +83,6 @@ examples: reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; thermal-sensor { compatible = "qcom,msm8960-tsens"; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml index d84608269080..0a0a26d9beab 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml @@ -51,6 +51,7 @@ properties: required: - compatible + - '#power-domain-cells' unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml index fb3957d485f9..012048921f92 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml @@ -34,6 +34,8 @@ properties: - const: xo - const: sleep_clk + '#power-domain-cells': false + required: - compatible @@ -45,7 +47,6 @@ examples: compatible = "qcom,gcc-ipq4019"; reg = <0x1800000 0x60000>; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; clocks = <&xo>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml index af5d883cfdc8..4d2614d4f368 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml @@ -36,6 +36,8 @@ properties: - const: xo - const: sleep_clk + '#power-domain-cells': false + required: - compatible - clocks @@ -51,7 +53,6 @@ examples: clocks = <&xo>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml index 93f3084b97c1..a71557395c01 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml @@ -46,6 +46,8 @@ properties: allOf: - $ref: /schemas/thermal/qcom-tsens.yaml# + '#power-domain-cells': false + required: - compatible - clocks @@ -65,7 +67,6 @@ examples: clock-names = "pxo", "cxo", "pll4"; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; tsens: thermal-sensor { compatible = "qcom,ipq8064-tsens"; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml index 2d44ddc45aab..38b9e4283900 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -39,6 +39,7 @@ properties: required: - compatible + - '#power-domain-cells' unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml index 7d05f0f63cef..d7da30b0e7ee 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml# +$id: http://devicetree.org/schemas/clock/qcom,gcc-mdm9607.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller @@ -15,7 +15,6 @@ description: | domains. See also:: - include/dt-bindings/clock/qcom,gcc-msm8953.h include/dt-bindings/clock/qcom,gcc-mdm9607.h allOf: @@ -28,6 +27,7 @@ properties: required: - compatible + - '#power-domain-cells' unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml new file mode 100644 index 000000000000..418dea31eb62 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-mdm9615.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains. + + See also:: + include/dt-bindings/clock/qcom,gcc-mdm9615.h + +allOf: + - $ref: qcom,gcc.yaml# + +properties: + compatible: + enum: + - qcom,gcc-mdm9615 + + clocks: + items: + - description: CXO clock + - description: PLL4 from LLC + + '#power-domain-cells': false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + clock-controller@900000 { + compatible = "qcom,gcc-mdm9615"; + reg = <0x900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&cxo_board>, + <&lcc_pll4>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml index c9e985548621..e03b6d0acdb6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml @@ -34,6 +34,8 @@ properties: - const: pxo - const: cxo + '#power-domain-cells': false + required: - compatible @@ -47,7 +49,6 @@ examples: reg = <0x900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; clocks = <&pxo_board>, <&cxo_board>; clock-names = "pxo", "cxo"; }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml index b91462587df5..ce1f5a60bd8c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml @@ -42,6 +42,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml index ad84c0f7680b..258b6b93deca 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml @@ -48,6 +48,7 @@ properties: required: - compatible + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml index fe9fd4cb185f..fe1f5f3ed992 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml @@ -42,6 +42,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml index 1927aecc86bc..929fafc84c19 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml @@ -41,6 +41,7 @@ properties: required: - compatible + - '#power-domain-cells' unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml index 62d6f1fe1228..cd49704dcb95 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml @@ -49,6 +49,7 @@ required: - clocks - clock-names - vdd_gfx-supply + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml index 8f0f20c1442a..6b9c1d198b14 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml @@ -35,6 +35,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml index 97523cc1ecfb..013fd074a8d5 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml @@ -50,6 +50,7 @@ properties: required: - compatible + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml index 58f7fb22c5c4..abae658c0ed9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml @@ -38,6 +38,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml index c9bec4656f6e..38c4c8c61b3a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml @@ -33,6 +33,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml index 7bc6c57e4d11..94755465c1fb 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml @@ -40,6 +40,7 @@ properties: required: - compatible + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index 7aae21a76690..1847bbeaa9d1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -40,6 +40,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml index c4ca08d9ad5a..4e4f68b9f6d2 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml @@ -51,6 +51,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml index a1085ef4fd05..b4784ecaf58d 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml @@ -40,6 +40,7 @@ required: - clocks - clock-names - power-domains + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml index 5681e535fede..5cfde8a4de4e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml @@ -65,6 +65,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml index 52e7412aace5..724ce0491118 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml @@ -40,6 +40,7 @@ properties: required: - compatible + - '#power-domain-cells' unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml index 0595da0e8a42..ef0a20456e8a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml @@ -35,6 +35,7 @@ properties: required: - compatible + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml index 428e954d7638..30819f3d85c6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml @@ -34,6 +34,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml index 523e18d7f150..915449228668 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml @@ -39,6 +39,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml index a5ad0a3da397..ecb69c707f09 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml @@ -33,6 +33,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml index 8e37623788bd..a5a29dc75ae1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml @@ -33,6 +33,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml index d1b26ab48eaf..2280b859b2ad 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml @@ -35,6 +35,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml index 58ccb7df847c..1dcf97c0c064 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -34,6 +34,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index 5d77c092be5b..979ff0a8bf68 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -36,6 +36,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml index b4fdde71ef18..594e87f5ba09 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml @@ -55,6 +55,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml index 75259f468d54..d848361beeb3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml @@ -49,6 +49,7 @@ required: - compatible - clocks - clock-names + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index 788825105f24..513d6fd89249 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -35,7 +35,6 @@ required: - reg - '#clock-cells' - '#reset-cells' - - '#power-domain-cells' additionalProperties: true diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml index 0518ea963cdd..79bb90dbe4c1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml @@ -33,28 +33,16 @@ properties: - const: gcc_gpu_gpll0_clk - const: gcc_gpu_gpll0_div_clk - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml index f57aceddac6b..0858fd635282 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml @@ -56,25 +56,10 @@ properties: vdd-gfx-supply: description: Regulator supply for the VDD_GFX pads - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' # Require that power-domains and vdd-gfx-supply are not both present @@ -83,7 +68,10 @@ not: - power-domains - vdd-gfx-supply -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml index ef84a0c95f7e..489d0fc5607c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml @@ -33,6 +33,8 @@ properties: - description: UNIPHY RX clock source - description: UNIPHY TX clk source + '#power-domain-cells': false + required: - compatible - clocks @@ -58,6 +60,5 @@ examples: <&uniphy_tx_clk>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml index 718fe0625424..adc30d84fa8f 100644 --- a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml @@ -30,6 +30,8 @@ properties: - description: PCIE 2lane x1 PHY pipe clock source (For second lane) - description: USB PCIE wrapper pipe clock source + '#power-domain-cells': false + required: - compatible - clocks @@ -47,7 +49,6 @@ examples: <&pcie_2lane_phy_pipe_clk_x1>, <&usb_pcie_wrapper_pipe_clk>; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml index 944a0ea79cd6..27ae9938febc 100644 --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml @@ -33,6 +33,11 @@ properties: - description: PCIE30 PHY3 pipe clock source - description: USB3 PHY pipe clock source + '#power-domain-cells': false + + '#interconnect-cells': + const: 1 + required: - compatible - clocks @@ -57,6 +62,5 @@ examples: <&usb3phy_0_cc_pipe_clk>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml index 7b271ae210a3..b9b218ef9b68 100644 --- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml @@ -29,28 +29,16 @@ properties: - const: xo - const: gpll0 - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml new file mode 100644 index 000000000000..61473385da2d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,qca8k-nsscc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm NSS Clock & Reset Controller on QCA8386/QCA8084 + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Luo Jie <quic_luoj@quicinc.com> + +description: | + Qualcomm NSS clock control module provides the clocks and resets + on QCA8386(switch mode)/QCA8084(PHY mode) + + See also:: + include/dt-bindings/clock/qcom,qca8k-nsscc.h + include/dt-bindings/reset/qcom,qca8k-nsscc.h + +properties: + compatible: + oneOf: + - const: qcom,qca8084-nsscc + - items: + - enum: + - qcom,qca8082-nsscc + - qcom,qca8085-nsscc + - qcom,qca8384-nsscc + - qcom,qca8385-nsscc + - qcom,qca8386-nsscc + - const: qcom,qca8084-nsscc + + clocks: + items: + - description: Chip reference clock source + - description: UNIPHY0 RX 312P5M/125M clock source + - description: UNIPHY0 TX 312P5M/125M clock source + - description: UNIPHY1 RX 312P5M/125M clock source + - description: UNIPHY1 TX 312P5M/125M clock source + - description: UNIPHY1 RX 312P5M clock source + - description: UNIPHY1 TX 312P5M clock source + + reg: + items: + - description: MDIO bus address for Clock & Reset Controller register + + reset-gpios: + description: GPIO connected to the chip + maxItems: 1 + +required: + - compatible + - clocks + - reg + - reset-gpios + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mdio { + #address-cells = <1>; + #size-cells = <0>; + + clock-controller@18 { + compatible = "qcom,qca8084-nsscc"; + reg = <0x18>; + reset-gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + clocks = <&pcs0_pll>, + <&qca8k_uniphy0_rx>, + <&qca8k_uniphy0_tx>, + <&qca8k_uniphy1_rx>, + <&qca8k_uniphy1_tx>, + <&qca8k_uniphy1_rx312p5m>, + <&qca8k_uniphy1_tx312p5m>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml index 4a00f2d41684..243be4f76db3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml @@ -37,28 +37,16 @@ properties: - const: dsi0_phy_pll_out_byteclk - const: dsi0_phy_pll_out_dsiclk - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml new file mode 100644 index 000000000000..734880805c1b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,qcm2290-gpucc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller on QCM2290 + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: | + Qualcomm graphics clock control module provides the clocks, resets and power + domains on Qualcomm SoCs. + + See also:: + include/dt-bindings/clock/qcom,qcm2290-gpucc.h + +properties: + compatible: + const: qcom,qcm2290-gpucc + + reg: + maxItems: 1 + + clocks: + items: + - description: AHB interface clock, + - description: SoC CXO clock + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + power-domains: + description: + A phandle and PM domain specifier for the CX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required CX performance point. + maxItems: 1 + +required: + - compatible + - clocks + - power-domains + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@5990000 { + compatible = "qcom,qcm2290-gpucc"; + reg = <0x0 0x05990000 0x0 0x9000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + power-domains = <&rpmpd QCM2290_VDDCX>; + required-opps = <&rpmpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml index d712b1a87e25..86befef02650 100644 --- a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml @@ -31,6 +31,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml index 0f641c235b13..addbd323fa6d 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml @@ -46,6 +46,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml index 1c9ce300a435..0d8ea44d8141 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -37,28 +37,16 @@ properties: - const: dp_phy_pll_link_clk - const: dp_phy_pll_vco_div_clk - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml index c42b0ef61385..23177661be40 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml @@ -41,28 +41,16 @@ properties: - const: edp_phy_pll_link_clk - const: edp_phy_pll_vco_div_clk - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml index 719844d7ea11..220f4004f7fd 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -46,28 +46,16 @@ properties: - const: dp_link_clk_divsel_ten - const: dp_vco_divided_clk_src_mux - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml index 98921fa236b1..567182aba300 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml @@ -41,6 +41,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml index 5953c8d92436..0ac92d7871e1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml @@ -32,6 +32,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml index f802a2e7f818..00be36683eb5 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml @@ -28,27 +28,15 @@ properties: - description: Pixel clock from DSI PHY0 - description: GPLL0 DISP DIV clock from GCC - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml index 295d4bb1a966..147b75a21508 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml @@ -31,6 +31,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml new file mode 100644 index 000000000000..7be4b10c430c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm7150-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller on SM7150 + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + - David Wronek <david@mainlining.org> + - Jens Reidel <adrian@travitia.xyz> + +description: | + Qualcomm camera clock control module provides the clocks, resets and power + domains on SM7150. + + See also:: include/dt-bindings/clock/qcom,sm7150-camcc.h + +properties: + compatible: + const: qcom,sm7150-camcc + + clocks: + items: + - description: Board XO source + - description: Board XO Active-Only source + - description: Sleep clock source + + power-domains: + maxItems: 1 + description: + CX power domain. + +required: + - compatible + - clocks + - power-domains + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + clock-controller@ad00000 { + compatible = "qcom,sm7150-camcc"; + reg = <0xad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml new file mode 100644 index 000000000000..b8d6e1d05ce2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm7150-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller for SM7150 + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + - David Wronek <david@mainlining.org> + - Jens Reidel <adrian@travitia.xyz> + +description: | + Qualcomm display clock control module provides the clocks, resets and power + domains on SM7150. + + See also:: include/dt-bindings/clock/qcom,sm7150-dispcc.h + +properties: + compatible: + const: qcom,sm7150-dispcc + + clocks: + items: + - description: Board XO source + - description: Board Always On XO source + - description: GPLL0 source from GCC + - description: Sleep clock source + - description: Byte clock from MDSS DSI PHY0 + - description: Pixel clock from MDSS DSI PHY0 + - description: Byte clock from MDSS DSI PHY1 + - description: Pixel clock from MDSS DSI PHY1 + - description: Link clock from DP PHY + - description: VCO DIV clock from DP PHY + + power-domains: + maxItems: 1 + description: + CX power domain. + +required: + - compatible + - clocks + - power-domains + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm7150-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + clock-controller@af00000 { + compatible = "qcom,sm7150-dispcc"; + reg = <0x0af00000 0x200000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <&dp_phy 0>, + <&dp_phy 1>; + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml index 0eb76d9d51c4..4d7bbbf4ce8a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml @@ -30,6 +30,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml new file mode 100644 index 000000000000..037ffc71e70e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm7150-videocc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Video Clock & Reset Controller on SM7150 + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + - David Wronek <david@mainlining.org> + - Jens Reidel <adrian@travitia.xyz> + +description: | + Qualcomm video clock control module provides the clocks, resets and power + domains on SM7150. + + See also:: include/dt-bindings/clock/qcom,videocc-sm7150.h + +properties: + compatible: + const: qcom,sm7150-videocc + + clocks: + items: + - description: Board XO source + - description: Board Always On XO source + + power-domains: + maxItems: 1 + description: + CX power domain. + +required: + - compatible + - clocks + - power-domains + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + videocc: clock-controller@ab00000 { + compatible = "qcom,sm7150-videocc"; + reg = <0x0ab00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml index fa0e5b6b02b8..f58edfc10f4c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -8,15 +8,17 @@ title: Qualcomm Camera Clock & Reset Controller on SM8450 maintainers: - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> + - Jagadeesh Kona <quic_jkona@quicinc.com> description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SM8450. - See also:: + See also: + include/dt-bindings/clock/qcom,sc8280xp-camcc.h include/dt-bindings/clock/qcom,sm8450-camcc.h include/dt-bindings/clock/qcom,sm8550-camcc.h - include/dt-bindings/clock/qcom,sc8280xp-camcc.h + include/dt-bindings/clock/qcom,sm8650-camcc.h include/dt-bindings/clock/qcom,x1e80100-camcc.h allOf: @@ -28,6 +30,7 @@ properties: - qcom,sc8280xp-camcc - qcom,sm8450-camcc - qcom,sm8550-camcc + - qcom,sm8650-camcc - qcom,x1e80100-camcc clocks: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml index 2f22310b08a9..4794c53793a8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml @@ -40,18 +40,6 @@ properties: - description: Link clock from DP PHY3 - description: VCO DIV clock from DP PHY3 - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - power-domains: description: A phandle and PM domain specifier for the MMCX power domain. @@ -64,13 +52,13 @@ properties: required: - compatible - - reg - clocks - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml index 36974309cf69..3c2cac14e6c3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml @@ -34,27 +34,15 @@ properties: - description: GPLL0 main branch source - description: GPLL0 div branch source - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - required: - compatible - - reg - clocks - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml index bad8f019a8d3..b2792b4bb554 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml @@ -8,21 +8,22 @@ title: Qualcomm Video Clock & Reset Controller on SM8450 maintainers: - Taniya Das <quic_tdas@quicinc.com> + - Jagadeesh Kona <quic_jkona@quicinc.com> description: | Qualcomm video clock control module provides the clocks, resets and power domains on SM8450. - See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h + See also: + include/dt-bindings/clock/qcom,sm8450-videocc.h + include/dt-bindings/clock/qcom,sm8650-videocc.h properties: compatible: enum: - qcom,sm8450-videocc - qcom,sm8550-videocc - - reg: - maxItems: 1 + - qcom,sm8650-videocc clocks: items: @@ -39,26 +40,17 @@ properties: description: A phandle to an OPP node describing required MMCX performance point. - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - required: - compatible - - reg - clocks - power-domains - required-opps - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml index bad0260764d4..c17035a180db 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml @@ -45,18 +45,6 @@ properties: - description: Link clock from DP PHY3 - description: VCO DIV clock from DP PHY3 - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - power-domains: description: A phandle and PM domain specifier for the MMCX power domain. @@ -69,13 +57,13 @@ properties: required: - compatible - - reg - clocks - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' -additionalProperties: false +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml index 0c706de31cf1..d83b64dcce4f 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml @@ -34,6 +34,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml index b54761cc8674..976f29cce809 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml @@ -35,6 +35,7 @@ properties: required: - compatible - clocks + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml index 6999e36ace1b..340c7e5cf980 100644 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml @@ -37,18 +37,6 @@ properties: minItems: 1 maxItems: 3 - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - power-domains: description: A phandle and PM domain specifier for the MMCX power domain. @@ -61,21 +49,19 @@ properties: required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - '#power-domain-cells' allOf: + - $ref: qcom,gcc.yaml# + - if: properties: compatible: enum: - qcom,sc7180-videocc - qcom,sdm845-videocc - - qcom,sm8150-videocc then: properties: clocks: @@ -105,6 +91,22 @@ allOf: properties: compatible: enum: + - qcom,sm8150-videocc + then: + properties: + clocks: + items: + - description: AHB + - description: Board XO source + clock-names: + items: + - const: iface + - const: bi_tcxo + + - if: + properties: + compatible: + enum: - qcom,sm8250-videocc then: properties: @@ -119,7 +121,7 @@ allOf: - const: bi_tcxo - const: bi_tcxo_ao -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml index 14a796dbf8bc..5951a60ab081 100644 --- a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml @@ -41,6 +41,7 @@ required: - compatible - clocks - power-domains + - '#power-domain-cells' allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt deleted file mode 100644 index 10119d9ef4b1..000000000000 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ /dev/null @@ -1,212 +0,0 @@ -* Clock Block on Freescale QorIQ Platforms - -Freescale QorIQ chips take primary clocking input from the external -SYSCLK signal. The SYSCLK input (frequency) is multiplied using -multiple phase locked loops (PLL) to create a variety of frequencies -which can then be passed to a variety of internal logic, including -cores and peripheral IP blocks. -Please refer to the Reference Manual for details. - -All references to "1.0" and "2.0" refer to the QorIQ chassis version to -which the chip complies. - -Chassis Version Example Chips ---------------- ------------- -1.0 p4080, p5020, p5040 -2.0 t4240, b4860 - -1. Clock Block Binding - -Required properties: -- compatible: Should contain a chip-specific clock block compatible - string and (if applicable) may contain a chassis-version clock - compatible string. - - Chip-specific strings are of the form "fsl,<chip>-clockgen", such as: - * "fsl,p2041-clockgen" - * "fsl,p3041-clockgen" - * "fsl,p4080-clockgen" - * "fsl,p5020-clockgen" - * "fsl,p5040-clockgen" - * "fsl,t1023-clockgen" - * "fsl,t1024-clockgen" - * "fsl,t1040-clockgen" - * "fsl,t1042-clockgen" - * "fsl,t2080-clockgen" - * "fsl,t2081-clockgen" - * "fsl,t4240-clockgen" - * "fsl,b4420-clockgen" - * "fsl,b4860-clockgen" - * "fsl,ls1012a-clockgen" - * "fsl,ls1021a-clockgen" - * "fsl,ls1028a-clockgen" - * "fsl,ls1043a-clockgen" - * "fsl,ls1046a-clockgen" - * "fsl,ls1088a-clockgen" - * "fsl,ls2080a-clockgen" - * "fsl,lx2160a-clockgen" - Chassis-version clock strings include: - * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks - * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks -- reg: Describes the address of the device's resources within the - address space defined by its parent bus, and resource zero - represents the clock register set - -Optional properties: -- ranges: Allows valid translation between child's address space and - parent's. Must be present if the device has sub-nodes. -- #address-cells: Specifies the number of cells used to represent - physical base addresses. Must be present if the device has - sub-nodes and set to 1 if present -- #size-cells: Specifies the number of cells used to represent - the size of an address. Must be present if the device has - sub-nodes and set to 1 if present -- clock-frequency: Input system clock frequency (SYSCLK) -- clocks: If clock-frequency is not specified, sysclk may be provided - as an input clock. Either clock-frequency or clocks must be - provided. - A second input clock, called "coreclk", may be provided if - core PLLs are based on a different input clock from the - platform PLL. -- clock-names: Required if a coreclk is present. Valid names are - "sysclk" and "coreclk". - -2. Clock Provider - -The clockgen node should act as a clock provider, though in older device -trees the children of the clockgen node are the clock providers. - -When the clockgen node is a clock provider, #clock-cells = <2>. -The first cell of the clock specifier is the clock type, and the -second cell is the clock index for the specified type. - - Type# Name Index Cell - 0 sysclk must be 0 - 1 cmux index (n in CLKCnCSR) - 2 hwaccel index (n in CLKCGnHWACSR) - 3 fman 0 for fm1, 1 for fm2 - 4 platform pll n=pll/(n+1). For example, when n=1, - that means output_freq=PLL_freq/2. - 5 coreclk must be 0 - -3. Example - - clockgen: global-utilities@e1000 { - compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; - clock-frequency = <133333333>; - reg = <0xe1000 0x1000>; - #clock-cells = <2>; - }; - - fman@400000 { - ... - clocks = <&clockgen 3 0>; - ... - }; -} -4. Legacy Child Nodes - -NOTE: These nodes are deprecated. Kernels should continue to support -device trees with these nodes, but new device trees should not use them. - -Most of the bindings are from the common clock binding[1]. - [1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : Should include one of the following: - * "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0) - * "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0) - * "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0) - * "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0) - * "fsl,qoriq-sysclk-1.0": for input system clock (v1.0). - It takes parent's clock-frequency as its clock. - * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0). - It takes parent's clock-frequency as its clock. - * "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0) - * "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0) -- #clock-cells: From common clock binding. The number of cells in a - clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0" - clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks. - For "fsl,qoriq-core-pll-[1,2].0" clocks, the single - clock-specifier cell may take the following values: - * 0 - equal to the PLL frequency - * 1 - equal to the PLL frequency divided by 2 - * 2 - equal to the PLL frequency divided by 4 - -Recommended properties: -- clocks: Should be the phandle of input parent clock -- clock-names: From common clock binding, indicates the clock name -- clock-output-names: From common clock binding, indicates the names of - output clocks -- reg: Should be the offset and length of clock block base address. - The length should be 4. - -Legacy Example: -/ { - clockgen: global-utilities@e1000 { - compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; - ranges = <0x0 0xe1000 0x1000>; - clock-frequency = <133333333>; - reg = <0xe1000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - sysclk: sysclk { - #clock-cells = <0>; - compatible = "fsl,qoriq-sysclk-1.0"; - clock-output-names = "sysclk"; - }; - - pll0: pll0@800 { - #clock-cells = <1>; - reg = <0x800 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2"; - }; - - pll1: pll1@820 { - #clock-cells = <1>; - reg = <0x820 0x4>; - compatible = "fsl,qoriq-core-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2"; - }; - - mux0: mux0@0 { - #clock-cells = <0>; - reg = <0x0 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux0"; - }; - - mux1: mux1@20 { - #clock-cells = <0>; - reg = <0x20 0x4>; - compatible = "fsl,qoriq-core-mux-1.0"; - clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; - clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; - clock-output-names = "cmux1"; - }; - - platform-pll: platform-pll@c00 { - #clock-cells = <1>; - reg = <0xc00 0x4>; - compatible = "fsl,qoriq-platform-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "platform-pll", "platform-pll-div2"; - }; - }; -}; - -Example for legacy clock consumer: - -/ { - cpu0: PowerPC,e5500@0 { - ... - clocks = <&mux0>; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml index 4e3b0c45124a..0440f23da059 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -62,7 +62,7 @@ properties: '#reset-cells': description: - The single reset specifier cell must be the module number, as defined in + The single reset specifier cell must be the reset number, as defined in <dt-bindings/clock/r9a0*-cpg.h>. const: 1 diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml new file mode 100644 index 000000000000..e7a9255bcb58 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sophgo,sg2042-clkgen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2042 Clock Generator for divider/mux/gate + +maintainers: + - Chen Wang <unicorn_wang@outlook.com> + +properties: + compatible: + const: sophgo,sg2042-clkgen + + reg: + maxItems: 1 + + clocks: + items: + - description: Main PLL + - description: Fixed PLL + - description: DDR PLL 0 + - description: DDR PLL 1 + + clock-names: + items: + - const: mpll + - const: fpll + - const: dpll0 + - const: dpll1 + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/sophgo,sg2042-clkgen.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@30012000 { + compatible = "sophgo,sg2042-clkgen"; + reg = <0x30012000 0x1000>; + clocks = <&pllclk 0>, + <&pllclk 1>, + <&pllclk 2>, + <&pllclk 3>; + clock-names = "mpll", + "fpll", + "dpll0", + "dpll1"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2042-pll.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2042-pll.yaml new file mode 100644 index 000000000000..1a417a627dd2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sophgo,sg2042-pll.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sophgo,sg2042-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2042 PLL Clock Generator + +maintainers: + - Chen Wang <unicorn_wang@outlook.com> + +properties: + compatible: + const: sophgo,sg2042-pll + + reg: + maxItems: 1 + + clocks: + items: + - description: Oscillator(Clock Generation IC) for Main/Fixed PLL (25 MHz) + - description: Oscillator(Clock Generation IC) for DDR PLL 0 (25 MHz) + - description: Oscillator(Clock Generation IC) for DDR PLL 1 (25 MHz) + + clock-names: + items: + - const: cgi_main + - const: cgi_dpll0 + - const: cgi_dpll1 + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/sophgo,sg2042-pll.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@10000000 { + compatible = "sophgo,sg2042-pll"; + reg = <0x10000000 0x10000>; + clocks = <&cgi_main>, <&cgi_dpll0>, <&cgi_dpll1>; + clock-names = "cgi_main", "cgi_dpll0", "cgi_dpll1"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2042-rpgate.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2042-rpgate.yaml new file mode 100644 index 000000000000..1491fb8ef6a3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sophgo,sg2042-rpgate.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sophgo,sg2042-rpgate.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2042 Gate Clock Generator for RP(riscv processors) subsystem + +maintainers: + - Chen Wang <unicorn_wang@outlook.com> + +properties: + compatible: + const: sophgo,sg2042-rpgate + + reg: + maxItems: 1 + + clocks: + items: + - description: Gate clock for RP subsystem + + clock-names: + items: + - const: rpgate + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/sophgo,sg2042-rpgate.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@20000000 { + compatible = "sophgo,sg2042-rpgate"; + reg = <0x20000000 0x10000>; + clocks = <&clkgen 85>; + clock-names = "rpgate"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt deleted file mode 100644 index aaaf02ca2a6a..000000000000 --- a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt +++ /dev/null @@ -1,63 +0,0 @@ -Spreadtrum SC9860 Clock Binding ------------------------- - -Required properties: -- compatible: should contain the following compatible strings: - - "sprd,sc9860-pmu-gate" - - "sprd,sc9860-pll" - - "sprd,sc9860-ap-clk" - - "sprd,sc9860-aon-prediv" - - "sprd,sc9860-apahb-gate" - - "sprd,sc9860-aon-gate" - - "sprd,sc9860-aonsecure-clk" - - "sprd,sc9860-agcp-gate" - - "sprd,sc9860-gpu-clk" - - "sprd,sc9860-vsp-clk" - - "sprd,sc9860-vsp-gate" - - "sprd,sc9860-cam-clk" - - "sprd,sc9860-cam-gate" - - "sprd,sc9860-disp-clk" - - "sprd,sc9860-disp-gate" - - "sprd,sc9860-apapb-gate" - -- #clock-cells: must be 1 - -- clocks : Should be the input parent clock(s) phandle for the clock, this - property here just simply shows which clock group the clocks' - parents are in, since each clk node would represent many clocks - which are defined in the driver. The detailed dependency - relationship (i.e. how many parents and which are the parents) - are implemented in driver code. - -Optional properties: - -- reg: Contain the registers base address and length. It must be configured - only if no 'sprd,syscon' under the node. - -- sprd,syscon: phandle to the syscon which is in the same address area with - the clock, and so we can get regmap for the clocks from the - syscon device. - -Example: - - pmu_gate: pmu-gate { - compatible = "sprd,sc9860-pmu-gate"; - sprd,syscon = <&pmu_regs>; - clocks = <&ext_26m>; - #clock-cells = <1>; - }; - - pll: pll { - compatible = "sprd,sc9860-pll"; - sprd,syscon = <&ana_regs>; - clocks = <&pmu_gate 0>; - #clock-cells = <1>; - }; - - ap_clk: clock-controller@20000000 { - compatible = "sprd,sc9860-ap-clk"; - reg = <0 0x20000000 0 0x400>; - clocks = <&ext_26m>, <&pll 0>, - <&pmu_gate 0>; - #clock-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml new file mode 100644 index 000000000000..502cd723511f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sprd,sc9860-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC9860 clock + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + enum: + - sprd,sc9860-agcp-gate + - sprd,sc9860-aonsecure-clk + - sprd,sc9860-aon-gate + - sprd,sc9860-aon-prediv + - sprd,sc9860-apahb-gate + - sprd,sc9860-apapb-gate + - sprd,sc9860-ap-clk + - sprd,sc9860-cam-clk + - sprd,sc9860-cam-gate + - sprd,sc9860-disp-clk + - sprd,sc9860-disp-gate + - sprd,sc9860-gpu-clk + - sprd,sc9860-pll + - sprd,sc9860-pmu-gate + - sprd,sc9860-vsp-clk + - sprd,sc9860-vsp-gate + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + '#clock-cells': + const: 1 + + sprd,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the syscon which is in the same address area with the + clock, and so we can get regmap for the clocks from the syscon device + +required: + - compatible + - clocks + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + contains: + enum: + - sprd,sc9860-agcp-gate + - sprd,sc9860-aon-gate + - sprd,sc9860-apahb-gate + - sprd,sc9860-apapb-gate + - sprd,sc9860-cam-gate + - sprd,sc9860-disp-gate + - sprd,sc9860-gpu-clk + - sprd,sc9860-pll + - sprd,sc9860-pmu-gate + - sprd,sc9860-vsp-gate + then: + properties: + clocks: + maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - sprd,sc9860-aonsecure-clk + - sprd,sc9860-cam-clk + - sprd,sc9860-disp-clk + - sprd,sc9860-vsp-clk + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + - if: + properties: + compatible: + contains: + enum: + - sprd,sc9860-aon-prediv + - sprd,sc9860-ap-clk + then: + properties: + clocks: + minItems: 3 + - if: + properties: + compatible: + contains: + enum: + - sprd,sc9860-aonsecure-clk + - sprd,sc9860-aon-prediv + - sprd,sc9860-ap-clk + - sprd,sc9860-cam-clk + - sprd,sc9860-disp-clk + - sprd,sc9860-gpu-clk + - sprd,sc9860-vsp-clk + then: + required: + - reg + properties: + sprd,syscon: false + - if: + properties: + compatible: + contains: + enum: + - sprd,sc9860-agcp-gate + - sprd,sc9860-aon-gate + - sprd,sc9860-apahb-gate + - sprd,sc9860-apapb-gate + - sprd,sc9860-cam-gate + - sprd,sc9860-disp-gate + - sprd,sc9860-pll + - sprd,sc9860-pmu-gate + - sprd,sc9860-vsp-gate + then: + required: + - sprd,syscon + properties: + reg: false + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pmu-gate { + compatible = "sprd,sc9860-pmu-gate"; + clocks = <&ext_26m>; + #clock-cells = <1>; + sprd,syscon = <&pmu_regs>; + }; + + clock-controller@20000000 { + compatible = "sprd,sc9860-ap-clk"; + reg = <0 0x20000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>, <&pmu_gate 0>; + #clock-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt deleted file mode 100644 index dbaa886b223e..000000000000 --- a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt +++ /dev/null @@ -1,20 +0,0 @@ -Clock bindings for ST-Ericsson ABx500 clocks - -Required properties : -- compatible : shall contain the following: - "stericsson,ab8500-clk" -- #clock-cells should be <1> - -The ABx500 clocks need to be placed as a subnode of an AB8500 -device node, see mfd/ab8500.txt - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/ste-ab8500.h header and can be used in device -tree sources. - -Example: - -clock-controller { - compatible = "stericsson,ab8500-clk"; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml b/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml new file mode 100644 index 000000000000..0129bd0ba4b3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/thead,th1520-clk-ap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-HEAD TH1520 AP sub-system clock controller + +description: | + The T-HEAD TH1520 AP sub-system clock controller configures the + CPU, DPU, GMAC and TEE PLLs. + + SoC reference manual + https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + - Wei Fu <wefu@redhat.com> + - Drew Fustini <dfustini@tenstorrent.com> + +properties: + compatible: + const: thead,th1520-clk-ap + + reg: + maxItems: 1 + + clocks: + items: + - description: main oscillator (24MHz) + + "#clock-cells": + const: 1 + description: + See <dt-bindings/clock/thead,th1520-clk-ap.h> for valid indices. + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/thead,th1520-clk-ap.h> + clock-controller@ef010000 { + compatible = "thead,th1520-clk-ap"; + reg = <0xef010000 0x1000>; + clocks = <&osc>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml index 0a9d6a4c4b66..66e8e66ca175 100644 --- a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml @@ -36,7 +36,7 @@ properties: The second cell should contain the clock ID. - Please see http://processors.wiki.ti.com/index.php/TISCI for + Please see https://software-dl.ti.com/tisci/esd/latest/index.html for protocol documentation for the values to be used for different devices. additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt deleted file mode 100644 index c35cb6c4af4d..000000000000 --- a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Device tree bindings for Texas Instruments keystone pll controller - -The main pll controller used to drive theC66x CorePacs, the switch fabric, -and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and -the NETCP modules) requires a PLL Controller to manage the various clock -divisions, gating, and synchronization. - -Required properties: - -- compatible: "ti,keystone-pllctrl", "syscon" - -- reg: contains offset/length value for pll controller - registers space. - -Example: - -pllctrl: pll-controller@02310000 { - compatible = "ti,keystone-pllctrl", "syscon"; - reg = <0x02310000 0x200>; -}; diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml index 85f1ff83afe7..c882ab5fcf1f 100644 --- a/Documentation/devicetree/bindings/counter/ti-eqep.yaml +++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: ti,am3352-eqep + enum: + - ti,am3352-eqep + - ti,am62-eqep reg: maxItems: 1 @@ -21,19 +23,35 @@ properties: maxItems: 1 clocks: - description: The clock that determines the SYSCLKOUT rate for the eQEP - peripheral. + description: The functional and interface clock that determines the clock + rate for the eQEP peripheral. maxItems: 1 clock-names: const: sysclkout + power-domains: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,am62-eqep + then: + properties: + clock-names: false + + required: + - power-domains + required: - compatible - reg - interrupts - clocks - - clock-names additionalProperties: false @@ -43,7 +61,6 @@ examples: compatible = "ti,am3352-eqep"; reg = <0x180 0x80>; clocks = <&l4ls_gclk>; - clock-names = "sysclkout"; interrupts = <79>; }; diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml index 4287678aa79f..da47b601c165 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -18,6 +18,7 @@ properties: - allwinner,sun50i-a64-crypto - allwinner,sun50i-h5-crypto - allwinner,sun50i-h6-crypto + - allwinner,sun50i-h616-crypto reg: maxItems: 1 @@ -49,6 +50,7 @@ if: compatible: enum: - allwinner,sun20i-d1-crypto + - allwinner,sun50i-h616-crypto then: properties: clocks: diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index 0c85894648d8..84d68b8cfccc 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -71,6 +71,10 @@ properties: - const: iahb - const: venci + power-domains: + maxItems: 1 + description: phandle to the associated power domain + resets: minItems: 3 @@ -129,6 +133,7 @@ examples: reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>; clock-names = "isfr", "iahb", "venci"; + power-domains = <&pd_vpu>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml index 4b7e54a8f037..33481381cccc 100644 --- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -45,6 +45,19 @@ properties: - const: isfr additionalItems: true + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + description: + The HDMI DDC bus can be connected to either a system I2C master or the + functionally-reduced I2C master contained in the DWC HDMI. When connected + to a system I2C master this property contains a phandle to that I2C + master controller. + + This property is deprecated, the system I2C master controller should + be referenced through the ddc-i2c-bus property of the HDMI connector + node. + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index ae894d996d21..2ad0cd6dd49e 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -25,8 +25,8 @@ properties: reg: enum: - - 0x68 - 0x0f + - 0x68 description: | i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml index 7979cf07f119..180c4b510fb1 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml @@ -31,14 +31,6 @@ properties: clock-names: maxItems: 2 - ddc-i2c-bus: - $ref: /schemas/types.yaml#/definitions/phandle - description: - The HDMI DDC bus can be connected to either a system I2C master or the - functionally-reduced I2C master contained in the DWC HDMI. When connected - to a system I2C master this property contains a phandle to that I2C - master controller. - gpr: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index b4c28e96dd55..cf24434854ff 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -36,6 +36,7 @@ properties: - mediatek,mt8188-disp-aal - mediatek,mt8192-disp-aal - mediatek,mt8195-disp-aal + - mediatek,mt8365-disp-aal - const: mediatek,mt8183-disp-aal reg: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml index 8c2a737237f2..9f8366763831 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml @@ -25,6 +25,9 @@ properties: - mediatek,mt8183-disp-ccorr - mediatek,mt8192-disp-ccorr - items: + - const: mediatek,mt8365-disp-ccorr + - const: mediatek,mt8183-disp-ccorr + - items: - enum: - mediatek,mt8186-disp-ccorr - mediatek,mt8188-disp-ccorr diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index b886ca0d89ea..7df786bbad20 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -40,6 +40,7 @@ properties: - mediatek,mt8188-disp-color - mediatek,mt8192-disp-color - mediatek,mt8195-disp-color + - mediatek,mt8365-disp-color - const: mediatek,mt8173-disp-color reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml index 1588b3f7cec7..6fceb1f95d2a 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml @@ -30,6 +30,7 @@ properties: - mediatek,mt8188-disp-dither - mediatek,mt8192-disp-dither - mediatek,mt8195-disp-dither + - mediatek,mt8365-disp-dither - const: mediatek,mt8183-disp-dither reg: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index 803c00f26206..5ca7679d5427 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -31,6 +31,10 @@ properties: - enum: - mediatek,mt6795-dpi - const: mediatek,mt8183-dpi + - items: + - enum: + - mediatek,mt8365-dpi + - const: mediatek,mt8192-dpi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml index 8611319bed2e..a7aa8fcb0dd1 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -37,6 +37,7 @@ properties: - items: - enum: - mediatek,mt8195-dsi + - mediatek,mt8365-dsi - const: mediatek,mt8183-dsi reg: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml index b8b8e83ebc3f..6823d3ce5049 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml @@ -35,6 +35,7 @@ properties: - mediatek,mt8188-disp-gamma - mediatek,mt8192-disp-gamma - mediatek,mt8195-disp-gamma + - mediatek,mt8365-disp-gamma - const: mediatek,mt8183-disp-gamma - items: - enum: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index c471a181d125..d55611c7ce5e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -44,6 +44,7 @@ properties: - items: - enum: - mediatek,mt8186-disp-ovl + - mediatek,mt8365-disp-ovl - const: mediatek,mt8192-disp-ovl reg: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml index 39dbb5c8bcf8..4cadb245d028 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml @@ -45,6 +45,7 @@ properties: - enum: - mediatek,mt8186-disp-rdma - mediatek,mt8192-disp-rdma + - mediatek,mt8365-disp-rdma - const: mediatek,mt8183-disp-rdma reg: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 1fa28e976559..b0fd96b76ed1 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -32,6 +32,7 @@ properties: - qcom,sm6125-dsi-ctrl - qcom,sm6350-dsi-ctrl - qcom,sm6375-dsi-ctrl + - qcom,sm7150-dsi-ctrl - qcom,sm8150-dsi-ctrl - qcom,sm8250-dsi-ctrl - qcom,sm8350-dsi-ctrl @@ -162,6 +163,22 @@ properties: items: enum: [ 0, 1, 2, 3 ] + qcom,te-source: + $ref: /schemas/types.yaml#/definitions/string + description: + Specifies the source of vsync signal from the panel used for + tearing elimination. + default: mdp_vsync_p + enum: + - mdp_vsync_p + - mdp_vsync_s + - mdp_vsync_e + - timer0 + - timer1 + - timer2 + - timer3 + - timer4 + required: - port@0 - port@1 @@ -332,6 +349,7 @@ allOf: enum: - qcom,sc7180-dsi-ctrl - qcom,sc7280-dsi-ctrl + - qcom,sm7150-dsi-ctrl - qcom,sm8150-dsi-ctrl - qcom,sm8250-dsi-ctrl - qcom,sm8350-dsi-ctrl @@ -452,6 +470,7 @@ examples: dsi0_out: endpoint { remote-endpoint = <&sn65dsi86_in>; data-lanes = <0 1 2 3>; + qcom,te-source = "mdp_vsync_e"; }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 288d8babb76a..a55c2445d189 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - qcom,dsi-phy-28nm-8226 + - qcom,dsi-phy-28nm-8937 - qcom,dsi-phy-28nm-8960 - qcom,dsi-phy-28nm-hpm - qcom,dsi-phy-28nm-hpm-fam-b diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index b3837368a260..b1bd372996d5 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -23,6 +23,9 @@ properties: - items: - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$' - const: qcom,adreno-gmu + - items: + - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$' + - const: qcom,adreno-gmu - const: qcom,adreno-gmu-wrapper reg: @@ -225,6 +228,7 @@ allOf: - qcom,adreno-gmu-730.1 - qcom,adreno-gmu-740.1 - qcom,adreno-gmu-750.1 + - qcom,adreno-gmu-x185.1 then: properties: reg: diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 40b5c6bd11f8..6ddc72fd85b0 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -10,6 +10,18 @@ title: Adreno or Snapdragon GPUs maintainers: - Rob Clark <robdclark@gmail.com> +# dtschema does not select nodes based on pattern+const, so add custom select +# as a work-around: +select: + properties: + compatible: + contains: + enum: + - qcom,adreno + - amd,imageon + required: + - compatible + properties: compatible: oneOf: @@ -17,7 +29,7 @@ properties: The driver is parsing the compat string for Adreno to figure out the chip-id. items: - - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$' + - pattern: '^qcom,adreno-[0-9a-f]{8}$' - const: qcom,adreno - description: | The driver is parsing the compat string for Adreno to @@ -32,9 +44,13 @@ properties: - pattern: '^amd,imageon-200\.[0-1]$' - const: amd,imageon - clocks: true + clocks: + minItems: 2 + maxItems: 7 - clock-names: true + clock-names: + minItems: 2 + maxItems: 7 reg: minItems: 1 @@ -42,7 +58,10 @@ properties: reg-names: minItems: 1 - maxItems: 3 + items: + - const: kgsl_3d0_reg_memory + - const: cx_mem + - const: cx_dbgc interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml index 91c774f106ce..e153f8d26e7a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml @@ -25,6 +25,7 @@ properties: - qcom,msm8226-mdp5 - qcom,msm8916-mdp5 - qcom,msm8917-mdp5 + - qcom,msm8937-mdp5 - qcom,msm8953-mdp5 - qcom,msm8974-mdp5 - qcom,msm8976-mdp5 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml index e4576546bf0d..7c6462caa442 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -126,6 +126,7 @@ patternProperties: - qcom,dsi-phy-14nm-8953 - qcom,dsi-phy-20nm - qcom,dsi-phy-28nm-8226 + - qcom,dsi-phy-28nm-8937 - qcom,dsi-phy-28nm-hpm - qcom,dsi-phy-28nm-hpm-fam-b - qcom,dsi-phy-28nm-lp diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml new file mode 100644 index 000000000000..c79b2d442800 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM7150 Display Processing Unit (DPU) + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm7150-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display ahb clock + - description: Display rotator clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: iface + - const: rot + - const: lut + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm7150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_disp_hf_axi_clk>, + <&dispcc_mdss_ahb_clk>, + <&dispcc_mdss_rot_clk>, + <&dispcc_mdss_mdp_lut_clk>, + <&dispcc_mdss_mdp_clk>, + <&dispcc_mdss_vsync_clk>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdss_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-344000000 { + opp-hz = /bits/ 64 <344000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm7150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-mdss.yaml new file mode 100644 index 000000000000..13c5d5ffabde --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-mdss.yaml @@ -0,0 +1,458 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM7150 Display MDSS + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + +description: + SM7150 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm7150-mdss + + clocks: + items: + - description: Display ahb clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from mdp1 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: mdp1-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,sm7150-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,sm7150-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + items: + - const: qcom,sm7150-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,dsi-phy-10nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interconnect/qcom,sm7150-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm7150-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc_mdss_gdsc>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&gcc_disp_sf_axi_clk>, + <&dispcc_mdss_mdp_clk>; + clock-names = "iface", + "bus", + "nrt_bus", + "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + iommus = <&apps_smmu 0x800 0x440>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm7150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_disp_hf_axi_clk>, + <&dispcc_mdss_ahb_clk>, + <&dispcc_mdss_rot_clk>, + <&dispcc_mdss_mdp_lut_clk>, + <&dispcc_mdss_mdp_clk>, + <&dispcc_mdss_vsync_clk>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdss_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-344000000 { + opp-hz = /bits/ 64 <344000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm7150-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc_mdss_byte0_clk>, + <&dispcc_mdss_byte0_intf_clk>, + <&dispcc_mdss_pclk0_clk>, + <&dispcc_mdss_esc0_clk>, + <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_mdss_byte0_clk_src>, + <&dispcc_mdss_pclk0_clk_src>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vdda_mipi_dsi0_pll>; + }; + + dsi@ae96000 { + compatible = "qcom,sm7150-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc_mdss_byte1_clk>, + <&dispcc_mdss_byte1_intf_clk>, + <&dispcc_mdss_pclk1_clk>, + <&dispcc_mdss_esc1_clk>, + <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_mdss_byte1_clk_src>, + <&dispcc_mdss_pclk1_clk_src>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vdda_mipi_dsi1_pll>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sm7150-dp"; + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&dispcc_mdss_dp_aux_clk>, + <&dispcc_mdss_dp_link_clk>, + <&dispcc_mdss_dp_link_intf_clk>, + <&dispcc_mdss_dp_pixel_clk>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc_mdss_dp_link_clk_src>, + <&dispcc_mdss_dp_pixel_clk_src>; + assigned-clock-parents = <&dp_phy 0>, + <&dp_phy 1>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&dp_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 9e603cad1348..7a9f49e40e75 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -32,8 +32,6 @@ properties: - innolux,hj110iz-01a # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel - starry,2081101qfh032011-53g - # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel - - starry,himax83102-j02 # STARRY ili9882t 10.51" WUXGA TFT LCD panel - starry,ili9882t diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml new file mode 100644 index 000000000000..c649fb085833 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/himax,hx83102.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX83102 MIPI-DSI LCD panel controller + +maintainers: + - Cong Yang <yangcong5@huaqin.corp-partner.google.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Boe nv110wum-l60 11.0" WUXGA TFT LCD panel + - boe,nv110wum-l60 + # IVO t109nw41 11.0" WUXGA TFT LCD panel + - ivo,t109nw41 + # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel + - starry,himax83102-j02 + - const: himax,hx83102 + + reg: + description: the virtual channel number of a DSI peripheral + + enable-gpios: + description: a GPIO spec for the enable pin + + pp1800-supply: + description: core voltage supply + + avdd-supply: + description: phandle of the regulator that provides positive voltage + + avee-supply: + description: phandle of the regulator that provides negative voltage + + backlight: true + port: true + rotation: true + +required: + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "starry,himax83102-j02", "himax,hx83102"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml new file mode 100644 index 000000000000..cfd7cc9c8725 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9806E based MIPI-DSI panels + +maintainers: + - Michael Walle <mwalle@kernel.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - ortustech,com35h3p70ulc + - const: ilitek,ili9806e + + reg: + maxItems: 1 + + vdd-supply: true + vccio-supply: true + +required: + - compatible + - reg + - vdd-supply + - vccio-supply + - reset-gpios + - backlight + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "ortustech,com35h3p70ulc", "ilitek,ili9806e"; + reg = <0>; + vdd-supply = <®_vdd_panel>; + vccio-supply = <®_vccio_panel>; + reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml index 20afdb4568a2..3d5bede98cf1 100644 --- a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml +++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml @@ -17,6 +17,7 @@ properties: items: - enum: - chongzhou,cz101b4001 + - kingdisplay,kd101ne3-40ti - radxa,display-10hd-ad001 - radxa,display-8hd-ad002 - const: jadard,jd9365da-h3 diff --git a/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml b/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml index 1e08648f5bc7..bbaaa783d184 100644 --- a/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml +++ b/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml @@ -21,7 +21,9 @@ properties: items: - const: lg,sw43408 - reg: true + reg: + maxItems: 1 + port: true vddi-supply: true vpnl-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/panel-edp-legacy.yaml b/Documentation/devicetree/bindings/display/panel/panel-edp-legacy.yaml new file mode 100644 index 000000000000..b308047c1edf --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-edp-legacy.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-edp-legacy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Legacy eDP panels from before the "edp-panel" compatible + +maintainers: + - Douglas Anderson <dianders@chromium.org> + +description: | + This binding file is a collection of eDP panels from before the generic + "edp-panel" compatible was introduced. It is kept around to support old + dts files. The only reason one might add a new panel here instead of using + the generic "edp-panel" is if it needed to be used on an eDP controller + that doesn't support the generic "edp-panel" compatible, but it should be + a strong preference to add the generic "edp-panel" compatible instead. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # AU Optronics Corporation 10.1" WSVGA TFT LCD panel + - auo,b101ean01 + # AUO B116XAK01 eDP TFT LCD panel + - auo,b116xa01 + # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel + - auo,b133htn01 + # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel + - auo,b133xtn01 + # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel + - boe,nv101wxmn51 + # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel + - boe,nv110wtm-n61 + # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel + - boe,nv133fhm-n61 + # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel + - boe,nv133fhm-n62 + # BOE NV140FHM-N49 14.0" FHD a-Si FT panel + - boe,nv140fhmn49 + # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel + - innolux,n116bca-ea1 + # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel + - innolux,n116bge + # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel + - innolux,n125hce-gn1 + # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel + - innolux,p120zdg-bf1 + # King & Display KD116N21-30NV-A010 eDP TFT LCD panel + - kingdisplay,kd116n21-30nv-a010 + # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel + - lg,lp079qx1-sp0v + # LG 9.7" (2048x1536 pixels) TFT LCD panel + - lg,lp097qx1-spa1 + # LG 12.0" (1920x1280 pixels) TFT LCD panel + - lg,lp120up1 + # LG 12.9" (2560x1700 pixels) TFT LCD panel + - lg,lp129qe + # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel + - neweast,wjfh116008a + # Samsung 12.2" (2560x1600 pixels) TFT LCD panel + - samsung,lsn122dl01-c01 + # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel + - samsung,ltn140at29-301 + # Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel + - sharp,ld-d5116z01b + # Sharp 12.3" (2400x1600 pixels) TFT LCD panel + - sharp,lq123p1jx31 + + backlight: true + ddc-i2c-bus: true + enable-gpios: true + panel-timing: true + port: true + power-supply: true + no-hpd: true + hpd-gpios: true + +additionalProperties: false + +required: + - compatible + - power-supply + +examples: + - | + panel: panel { + compatible = "innolux,n116bge"; + power-supply = <&panel_regulator>; + backlight = <&backlight>; + + panel-timing { + clock-frequency = <74250000>; + hactive = <1366>; + hfront-porch = <136>; + hback-porch = <60>; + hsync-len = <30>; + hsync-active = <0>; + vactive = <768>; + vfront-porch = <8>; + vback-porch = <12>; + vsync-len = <12>; + vsync-active = <0>; + }; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index d0ac31ab60cf..6f0290c4e291 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -50,6 +50,12 @@ description: | | Command or data | |<D7><D6><D5><D4><D3><D2><D1><D0>| + The standard defines one pixel format for type C: RGB111. The industry + however has decided to provide the type A/B interface pixel formats also on + the Type C interface and most common among these are RGB565 and RGB666. + The MIPI DCS command set_address_mode (36h) has one bit that controls RGB/BGR + order. This gives each supported RGB format a BGR variant. + The panel resolution is specified using the panel-timing node properties hactive (width) and vactive (height). The other mandatory panel-timing properties should be set to zero except clock-frequency which can be @@ -93,6 +99,28 @@ properties: spi-3wire: true + format: + description: > + Pixel format in bit order as going on the wire: + * `x2r1g1b1r1g1b1` - RGB111, 2 pixels per byte + * `x2b1g1r1b1g1r1` - BGR111, 2 pixels per byte + * `x1r1g1b1x1r1g1b1` - RGB111, 2 pixels per byte + * `x1b1g1r1x1b1g1r1` - BGR111, 2 pixels per byte + * `r5g6b5` - RGB565, 2 bytes + * `b5g6r5` - BGR565, 2 bytes + * `r6x2g6x2b6x2` - RGB666, 3 bytes + * `b6x2g6x2r6x2` - BGR666, 3 bytes + enum: + - x2r1g1b1r1g1b1 + - x2b1g1r1b1g1r1 + - x1r1g1b1x1r1g1b1 + - x1b1g1r1x1b1g1r1 + - r5g6b5 + - b5g6r5 + - r6x2g6x2b6x2 + - b6x2g6x2r6x2 + default: r5g6b5 + required: - compatible - reg @@ -119,6 +147,8 @@ examples: reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; write-only; + format = "r5g6b5"; + backlight = <&backlight>; width-mm = <35>; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index db5acd2807ed..9b92a05791cc 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -46,6 +46,8 @@ properties: - lg,ld070wx3-sl01 # LG Corporation 5" HD TFT LCD panel - lg,lh500wx1-sd03 + # Lincoln LCD197 5" 1080x1920 LCD panel + - lincolntech,lcd197 # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel - osddisplays,osd101t2587-53ts # Panasonic 10" WUXGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml index 716ece5f3978..e78160d1aa24 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml @@ -41,6 +41,12 @@ properties: - auo,g190ean01 # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel - koe,tx26d202vm0bwa + # Lincoln Technology Solutions, LCD185-101CT 10.1" TFT 1920x1200 + - lincolntech,lcd185-101ct + # Microtips Technology MF-101HIEBCAF0 10.1" WUXGA (1920x1200) TFT LCD panel + - microtips,mf-101hiebcaf0 + # Microtips Technology MF-103HIEB0GA0 10.25" 1920x720 TFT LCD panel + - microtips,mf-103hieb0ga0 # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel - nlt,nl192108ac18-02d diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 5067f5c0a272..8a87e0100dcb 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -41,28 +41,18 @@ properties: - ampire,am800600p5tmqw-tb8h # AU Optronics Corporation 10.1" WSVGA TFT LCD panel - auo,b101aw03 - # AU Optronics Corporation 10.1" WSVGA TFT LCD panel - - auo,b101ean01 # AU Optronics Corporation 10.1" WXGA TFT LCD panel - auo,b101xtn01 - # AUO B116XAK01 eDP TFT LCD panel - - auo,b116xa01 # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel - auo,b116xw03 - # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel - - auo,b133han05 - # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel - - auo,b133htn01 - # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel - - auo,b133xtn01 - # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel - - auo,b140han06 # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel - auo,g070vvn01 # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel - auo,g101evn010 # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel - auo,g104sn02 + # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel + - auo,g104stn01 # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel - auo,g121ean01 # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel @@ -81,16 +71,6 @@ properties: - boe,ev121wxm-n10-1850 # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel - boe,hv070wsa-100 - # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel - - boe,nv101wxmn51 - # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel - - boe,nv110wtm-n61 - # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel - - boe,nv133fhm-n61 - # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel - - boe,nv133fhm-n62 - # BOE NV140FHM-N49 14.0" FHD a-Si FT panel - - boe,nv140fhmn49 # Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel - cct,cmt430b19n00 # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel @@ -172,8 +152,6 @@ properties: - hannstar,hsd100pxn1 # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel - hit,tx23d38vm0caa - # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel - - ivo,m133nwf4-r0 # Innolux AT043TN24 4.3" WQVGA TFT LCD panel - innolux,at043tn24 # Innolux AT070TN92 7.0" WQVGA TFT LCD panel @@ -192,22 +170,12 @@ properties: - innolux,g121x1-l03 # Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel - innolux,g121xce-l01 - # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - - innolux,n116bca-ea1 - # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - - innolux,n116bge - # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel - - innolux,n125hce-gn1 # InnoLux 15.6" FHD (1920x1080) TFT LCD panel - innolux,g156hce-l01 # InnoLux 15.6" WXGA TFT LCD panel - innolux,n156bge-l21 - # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel - - innolux,p120zdg-bf1 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - innolux,zj070na-01p - # King & Display KD116N21-30NV-A010 eDP TFT LCD panel - - kingdisplay,kd116n21-30nv-a010 # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel @@ -220,14 +188,6 @@ properties: - lemaker,bl035-rgb-002 # LG 7" (800x480 pixels) TFT LCD panel - lg,lb070wv8 - # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel - - lg,lp079qx1-sp0v - # LG 9.7" (2048x1536 pixels) TFT LCD panel - - lg,lp097qx1-spa1 - # LG 12.0" (1920x1280 pixels) TFT LCD panel - - lg,lp120up1 - # LG 12.9" (2560x1700 pixels) TFT LCD panel - - lg,lp129qe # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module - logictechno,lt161010-2nhc # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module @@ -254,8 +214,6 @@ properties: - nec,nl4827hc19-05b # Netron-DY E231732 7.0" WSVGA TFT LCD panel - netron-dy,e231732 - # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel - - neweast,wjfh116008a # Newhaven Display International 480 x 272 TFT LCD panel - newhaven,nhd-4.3-480272ef-atxl # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel @@ -280,6 +238,8 @@ properties: - powertip,ph128800t006-zhc01 # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel - powertip,ph800480t013-idf02 + # PrimeView PM070WL4 7.0" 800x480 TFT LCD panel + - primeview,pm070wl4 # QiaoDian XianShi Corporation 4"3 TFT LCD panel - qiaodian,qd43003c0-40 # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel @@ -290,16 +250,10 @@ properties: - rocktech,rk070er9427 # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel - rocktech,rk043fn48h - # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel - - samsung,atna33xc20 - # Samsung 12.2" (2560x1600 pixels) TFT LCD panel - - samsung,lsn122dl01-c01 # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel - samsung,ltl101al01 # Samsung Electronics 10.1" WSVGA TFT LCD panel - samsung,ltn101nt05 - # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel - - samsung,ltn140at29-301 # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel - satoz,sat050at40h12r2 # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel @@ -308,18 +262,12 @@ properties: - sharp,lq070y3dg3b # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel - sharp,lq101k1ly04 - # Sharp 12.3" (2400x1600 pixels) TFT LCD panel - - sharp,lq123p1jx31 - # Sharp 14" (1920x1080 pixels) TFT LCD panel - - sharp,lq140m1jw46 # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel - sharp,ls020b1dd01d # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel - shelly,sca07010-bfn-lnn # Starry KR070PE2T 7" WVGA TFT LCD panel - starry,kr070pe2t - # Starry 12.2" (1920x1200 pixels) TFT LCD panel - - starry,kr122ea0sra # Startek KD070WVFPA043-C069A 7" TFT LCD panel - startek,kd070wvfpa # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml index b17765b2b351..ec445ff5631c 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml @@ -28,6 +28,9 @@ properties: to work with the indicated panel. The raydium,rm69380 compatible shall always be provided as a fallback. + reg: + maxItems: 1 + avdd-supply: description: Analog voltage rail @@ -38,8 +41,6 @@ properties: maxItems: 1 description: phandle of gpio for reset line - This should be active low - reg: true - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml new file mode 100644 index 000000000000..5192c93fbd67 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,atna33xc20.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel + +maintainers: + - Douglas Anderson <dianders@chromium.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + oneOf: + # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel + - const: samsung,atna33xc20 + # Samsung 14.5" WQXGA+ (2880x1800 pixels) eDP AMOLED panel + - items: + - const: samsung,atna45af01 + - const: samsung,atna33xc20 + + enable-gpios: true + port: true + power-supply: true + no-hpd: true + hpd-gpios: true + +additionalProperties: false + +required: + - compatible + - enable-gpios + - power-supply + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel { + compatible = "samsung,atna33xc20"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + power-supply = <&pp3300_dx_edp>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml deleted file mode 100644 index fbb647eb33c9..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml +++ /dev/null @@ -1,30 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel - -maintainers: - - Jeffrey Hugo <jeffrey.l.hugo@gmail.com> - -allOf: - - $ref: panel-common.yaml# - -properties: - compatible: - const: sharp,ld-d5116z01b - - power-supply: true - backlight: true - port: true - no-hpd: true - -additionalProperties: false - -required: - - compatible - - power-supply - -... diff --git a/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml new file mode 100644 index 000000000000..e552d01b52b9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/wl-355608-a8.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WL-355608-A8 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - Ryan Walklin <ryan@testtoast.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: wl-355608-a8 + + reg: + maxItems: 1 + + spi-3wire: true + +required: + - compatible + - reg + - port + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "wl-355608-a8"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14 + + backlight = <&backlight>; + power-supply = <®_lcd>; + + port { + endpoint { + remote-endpoint = <&tcon_lcd0_out_lcd>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml index 2aac62219ff6..9d096856a79a 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -70,14 +70,6 @@ properties: - vpll - ref - ddc-i2c-bus: - $ref: /schemas/types.yaml#/definitions/phandle - description: - The HDMI DDC bus can be connected to either a system I2C master or the - functionally-reduced I2C master contained in the DWC HDMI. When connected - to a system I2C master this property contains a phandle to that I2C - master controller. - phys: maxItems: 1 description: The HDMI PHY diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml index ccf79e738fa1..ccd71c5324af 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml @@ -15,6 +15,7 @@ properties: items: - enum: - rockchip,px30-mipi-dsi + - rockchip,rk3128-mipi-dsi - rockchip,rk3288-mipi-dsi - rockchip,rk3399-mipi-dsi - rockchip,rk3568-mipi-dsi @@ -77,6 +78,7 @@ allOf: contains: enum: - rockchip,px30-mipi-dsi + - rockchip,rk3128-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi diff --git a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml new file mode 100644 index 000000000000..6736f93256b5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/st,stm32mp25-lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 LVDS Display Interface Transmitter + +maintainers: + - Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> + - Yannick Fertre <yannick.fertre@foss.st.com> + +description: | + The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the + LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC) + onto the LVDS PHY. + + It is composed of three sub blocks: + - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input + pixels onto the data lanes of the PHY + - LVDS PHY: parallelize the data and drives the LVDS data lanes + - LVDS wrapper: handles top-level settings + + The LVDS controller driver supports the following high-level features: + - FDP-Link-I and OpenLDI (v0.95) protocols + - Single-Link or Dual-Link operation + - Single-Display or Double-Display (with the same content duplicated on both) + - Flexible Bit-Mapping, including JEIDA and VESA + - RGB888 or RGB666 output + - Synchronous design, with one input pixel per clock cycle + +properties: + compatible: + const: st,stm32mp25-lvds + + "#clock-cells": + const: 0 + description: + Provides the internal LVDS PHY clock to the framework. + + reg: + maxItems: 1 + + clocks: + items: + - description: APB peripheral clock + - description: Reference clock for the internal PLL + + clock-names: + items: + - const: pclk + - const: ref + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + LVDS input port node, connected to the LTDC RGB output port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + LVDS output port node, connected to a panel or bridge input port. + + required: + - port@0 + - port@1 + +required: + - compatible + - "#clock-cells" + - reg + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/st,stm32mp25-rcc.h> + #include <dt-bindings/reset/st,stm32mp25-rcc.h> + + lvds: lvds@48060000 { + compatible = "st,stm32mp25-lvds"; + reg = <0x48060000 0x2000>; + #clock-cells = <0>; + clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>; + clock-names = "pclk", "ref"; + resets = <&rcc LVDS_R>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + lvds_out0: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-dma.yaml new file mode 100644 index 000000000000..902a11f65be2 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl,imx-dma.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/fsl,imx-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Direct Memory Access (DMA) Controller for i.MX + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + enum: + - fsl,imx1-dma + - fsl,imx21-dma + - fsl,imx27-dma + + reg: + maxItems: 1 + + interrupts: + items: + - description: DMA complete interrupt + - description: DMA Error interrupt + minItems: 1 + + "#dma-cells": + const: 1 + + dma-channels: + const: 16 + + dma-requests: + description: Number of DMA requests supported. + +required: + - compatible + - reg + - interrupts + - "#dma-cells" + +additionalProperties: false + +examples: + - | + dma-controller@10001000 { + compatible = "fsl,imx27-dma"; + reg = <0x10001000 0x1000>; + interrupts = <32 33>; + #dma-cells = <1>; + dma-channels = <16>; + }; diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt deleted file mode 100644 index 1c9929d53727..000000000000 --- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Freescale Direct Memory Access (DMA) Controller for i.MX - -This document will only describe differences to the generic DMA Controller and -DMA request bindings as described in dma/dma.txt . - -* DMA controller - -Required properties: -- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27 -- reg : Should contain DMA registers location and length -- interrupts : First item should be DMA interrupt, second one is optional and - should contain DMA Error interrupt -- #dma-cells : Has to be 1. imx-dma does not support anything else. - -Optional properties: -- dma-channels : Number of DMA channels supported. Should be 16. -- #dma-channels : deprecated -- dma-requests : Number of DMA requests supported. -- #dma-requests : deprecated - -Example: - - dma: dma@10001000 { - compatible = "fsl,imx27-dma"; - reg = <0x10001000 0x1000>; - interrupts = <32 33>; - #dma-cells = <1>; - dma-channels = <16>; - }; - - -* DMA client - -Clients have to specify the DMA requests with phandles in a list. - -Required properties: -- dmas: List of one or more DMA request specifiers. One DMA request specifier - consists of a phandle to the DMA controller followed by the integer - specifying the request line. -- dma-names: List of string identifiers for the DMA requests. For the correct - names, have a look at the specific client driver. - -Example: - - sdhci1: sdhci@10013000 { - ... - dmas = <&dma 7>; - dma-names = "rx-tx"; - ... - }; diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt deleted file mode 100644 index da371c4d406c..000000000000 --- a/Documentation/devicetree/bindings/dma/fsl-qdma.txt +++ /dev/null @@ -1,58 +0,0 @@ -NXP Layerscape SoC qDMA Controller -================================== - -This device follows the generic DMA bindings defined in dma/dma.txt. - -Required properties: - -- compatible: Must be one of - "fsl,ls1021a-qdma": for LS1021A Board - "fsl,ls1028a-qdma": for LS1028A Board - "fsl,ls1043a-qdma": for ls1043A Board - "fsl,ls1046a-qdma": for ls1046A Board -- reg: Should contain the register's base address and length. -- interrupts: Should contain a reference to the interrupt used by this - device. -- interrupt-names: Should contain interrupt names: - "qdma-queue0": the block0 interrupt - "qdma-queue1": the block1 interrupt - "qdma-queue2": the block2 interrupt - "qdma-queue3": the block3 interrupt - "qdma-error": the error interrupt -- fsl,dma-queues: Should contain number of queues supported. -- dma-channels: Number of DMA channels supported -- block-number: the virtual block number -- block-offset: the offset of different virtual block -- status-sizes: status queue size of per virtual block -- queue-sizes: command queue size of per virtual block, the size number - based on queues - -Optional properties: - -- dma-channels: Number of DMA channels supported by the controller. -- big-endian: If present registers and hardware scatter/gather descriptors - of the qDMA are implemented in big endian mode, otherwise in little - mode. - -Examples: - - qdma: dma-controller@8390000 { - compatible = "fsl,ls1021a-qdma"; - reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ - <0x0 0x8389000 0x0 0x1000>, /* Status regs */ - <0x0 0x838a000 0x0 0x2000>; /* Block regs */ - interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "qdma-error", - "qdma-queue0", "qdma-queue1"; - dma-channels = <8>; - block-number = <2>; - block-offset = <0x1000>; - fsl,dma-queues = <2>; - status-sizes = <64>; - queue-sizes = <64 64>; - big-endian; - }; - -DMA clients must use the format described in dma/dma.txt file. diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.yaml b/Documentation/devicetree/bindings/dma/fsl-qdma.yaml new file mode 100644 index 000000000000..1b9ebdbe528a --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-qdma.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/fsl-qdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Layerscape SoC qDMA Controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - fsl,ls1021a-qdma + - fsl,ls1028a-qdma + - fsl,ls1043a-qdma + - fsl,ls1046a-qdma + + reg: + items: + - description: Controller regs + - description: Status regs + - description: Block regs + + interrupts: + minItems: 2 + maxItems: 5 + + interrupt-names: + minItems: 2 + items: + - const: qdma-error + - const: qdma-queue0 + - const: qdma-queue1 + - const: qdma-queue2 + - const: qdma-queue3 + + dma-channels: + minimum: 1 + maximum: 64 + + fsl,dma-queues: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Should contain number of queues supported. + minimum: 1 + maximum: 4 + + block-number: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the virtual block number + + block-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the offset of different virtual block + + status-sizes: + $ref: /schemas/types.yaml#/definitions/uint32 + description: status queue size of per virtual block + + queue-sizes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + command queue size of per virtual block, the size number + based on queues + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present registers and hardware scatter/gather descriptors + of the qDMA are implemented in big endian mode, otherwise in little + mode. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - fsl,dma-queues + - block-number + - block-offset + - status-sizes + - queue-sizes + +allOf: + - $ref: dma-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - fsl,ls1028a-qdma + - fsl,ls1043a-qdma + - fsl,ls1046a-qdma + then: + properties: + interrupts: + minItems: 5 + interrupt-names: + minItems: 5 + else: + properties: + interrupts: + maxItems: 3 + interrupt-names: + maxItems: 3 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dma-controller@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x8388000 0x1000>, /* Controller regs */ + <0x8389000 0x1000>, /* Status regs */ + <0x838a000 0x2000>; /* Block regs */ + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1"; + #dma-cells = <1>; + dma-channels = <8>; + block-number = <2>; + block-offset = <0x1000>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + fsl,dma-queues = <2>; + }; + diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index deb64cb9ca3e..4df4e61895d2 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -27,6 +27,7 @@ properties: - qcom,qcm2290-gpi-dma - qcom,qdu1000-gpi-dma - qcom,sc7280-gpi-dma + - qcom,sdx75-gpi-dma - qcom,sm6115-gpi-dma - qcom,sm6375-gpi-dma - qcom,sm8350-gpi-dma diff --git a/Documentation/devicetree/bindings/dma/sprd,sc9860-dma.yaml b/Documentation/devicetree/bindings/dma/sprd,sc9860-dma.yaml new file mode 100644 index 000000000000..94647219c021 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sprd,sc9860-dma.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/sprd,sc9860-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC9860 DMA controller + +description: | + There are three DMA controllers: AP DMA, AON DMA and AGCP DMA. For AGCP + DMA controller, it can or do not request the IRQ, which will save + system power without resuming system by DMA interrupts if AGCP DMA + does not request the IRQ. + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + const: sprd,sc9860-dma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: DMA enable clock + - description: optional ashb_eb clock, only for the AGCP DMA controller + + clock-names: + minItems: 1 + items: + - const: enable + - const: ashb_eb + + '#dma-cells': + const: 1 + + dma-channels: + const: 32 + + '#dma-channels': + const: 32 + deprecated: true + +required: + - compatible + - reg + - clocks + - clock-names + - '#dma-cells' + - dma-channels + +allOf: + - $ref: dma-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/sprd,sc9860-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + /* AP DMA controller */ + dma-controller@20100000 { + compatible = "sprd,sc9860-dma"; + reg = <0x20100000 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apahb_gate CLK_DMA_EB>; + clock-names = "enable"; + #dma-cells = <1>; + dma-channels = <32>; + }; + + /* AGCP DMA controller */ + dma-controller@41580000 { + compatible = "sprd,sc9860-dma"; + reg = <0x41580000 0x4000>; + clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>, + <&agcp_gate CLK_AGCP_AP_ASHB_EB>; + clock-names = "enable", "ashb_eb"; + #dma-cells = <1>; + dma-channels = <32>; + }; +... diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt deleted file mode 100644 index c7e9b5fd50e7..000000000000 --- a/Documentation/devicetree/bindings/dma/sprd-dma.txt +++ /dev/null @@ -1,44 +0,0 @@ -* Spreadtrum DMA controller - -This binding follows the generic DMA bindings defined in dma.txt. - -Required properties: -- compatible: Should be "sprd,sc9860-dma". -- reg: Should contain DMA registers location and length. -- interrupts: Should contain one interrupt shared by all channel. -- #dma-cells: must be <1>. Used to represent the number of integer - cells in the dmas property of client device. -- dma-channels : Number of DMA channels supported. Should be 32. -- clock-names: Should contain the clock of the DMA controller. -- clocks: Should contain a clock specifier for each entry in clock-names. - -Deprecated properties: -- #dma-channels : Number of DMA channels supported. Should be 32. - -Example: - -Controller: -apdma: dma-controller@20100000 { - compatible = "sprd,sc9860-dma"; - reg = <0x20100000 0x4000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - clock-names = "enable"; - clocks = <&clk_ap_ahb_gates 5>; -}; - - -Client: -DMA clients connected to the Spreadtrum DMA controller must use the format -described in the dma.txt file, using a two-cell specifier for each channel. -The two cells in order are: -1. A phandle pointing to the DMA controller. -2. The slave id. - -spi0: spi@70a00000{ - ... - dma-names = "rx_chn", "tx_chn"; - dmas = <&apdma 11>, <&apdma 12>; - ... -}; diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml index ff935a0068ec..11a289f1d505 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml +++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml# +$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 DMA Controller @@ -53,7 +53,7 @@ maintainers: - Amelie Delaunay <amelie.delaunay@foss.st.com> allOf: - - $ref: dma-controller.yaml# + - $ref: /schemas/dma/dma-controller.yaml# properties: "#dma-cells": diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml new file mode 100644 index 000000000000..7fdc44b2e646 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DMA3 Controller + +description: | + The STM32 DMA3 is a direct memory access controller with different features + depending on its hardware configuration. + It is either called LPDMA (Low Power), GPDMA (General Purpose) or HPDMA (High + Performance). + Its hardware configuration registers allow to dynamically expose its features. + + GPDMA and HPDMA support 16 independent DMA channels, while only 4 for LPDMA. + GPDMA and HPDMA support 256 DMA requests from peripherals, 8 for LPDMA. + + Bindings are generic for these 3 STM32 DMA3 configurations. + + DMA clients connected to the STM32 DMA3 controller must use the format + described in "#dma-cells" property description below, using a three-cell + specifier for each channel. + +maintainers: + - Amelie Delaunay <amelie.delaunay@foss.st.com> + +allOf: + - $ref: /schemas/dma/dma-controller.yaml# + +properties: + compatible: + const: st,stm32mp25-dma3 + + reg: + maxItems: 1 + + interrupts: + minItems: 4 + maxItems: 16 + description: + Should contain all of the per-channel DMA interrupts in ascending order + with respect to the DMA channel index. + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#dma-cells": + const: 3 + description: | + Specifies the number of cells needed to provide DMA controller specific + information. + The first cell is the request line number. + The second cell is a 32-bit mask specifying the DMA channel requirements: + -bit 0-1: The priority level + 0x0: low priority, low weight + 0x1: low priority, mid weight + 0x2: low priority, high weight + 0x3: high priority + -bit 4-7: The FIFO requirement for queuing source/destination transfers + 0x0: no FIFO requirement/any channel can fit + 0x2: FIFO of 8 bytes (2^2+1) + 0x4: FIFO of 32 bytes (2^4+1) + 0x6: FIFO of 128 bytes (2^6+1) + 0x7: FIFO of 256 bytes (2^7+1) + The third cell is a 32-bit mask specifying the DMA transfer requirements: + -bit 0: The source incrementing burst + 0x0: fixed burst + 0x1: contiguously incremented burst + -bit 1: The source allocated port + 0x0: port 0 is allocated to the source transfer + 0x1: port 1 is allocated to the source transfer + -bit 4: The destination incrementing burst + 0x0: fixed burst + 0x1: contiguously incremented burst + -bit 5: The destination allocated port + 0x0: port 0 is allocated to the destination transfer + 0x1: port 1 is allocated to the destination transfer + -bit 8: The type of hardware request + 0x0: burst + 0x1: block + -bit 9: The control mode + 0x0: DMA controller control mode + 0x1: peripheral control mode + -bit 12-13: The transfer complete event mode + 0x0: at block level, transfer complete event is generated at the end + of a block + 0x2: at LLI level, the transfer complete event is generated at the end + of the LLI transfer + including the update of the LLI if any + 0x3: at channel level, the transfer complete event is generated at the + end of the last LLI + +required: + - compatible + - reg + - interrupts + - clocks + - "#dma-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/st,stm32mp25-rcc.h> + dma-controller@40400000 { + compatible = "st,stm32mp25-dma3"; + reg = <0x40400000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CK_BUS_HPDMA1>; + #dma-cells = <3>; + }; +... diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml index ddf82bf1e71a..f26c914a3a9a 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml# +$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dmamux.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 DMA MUX (DMA request router) @@ -10,7 +10,7 @@ maintainers: - Amelie Delaunay <amelie.delaunay@foss.st.com> allOf: - - $ref: dma-router.yaml# + - $ref: /schemas/dma/dma-router.yaml# properties: "#dma-cells": diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-mdma.yaml index 3874544dfa74..45fe91db11db 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml +++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-mdma.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml# +$id: http://devicetree.org/schemas/dma/stm32/st,stm32-mdma.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 MDMA Controller @@ -53,7 +53,7 @@ maintainers: - Amelie Delaunay <amelie.delaunay@foss.st.com> allOf: - - $ref: dma-controller.yaml# + - $ref: /schemas/dma/dma-controller.yaml# properties: "#dma-cells": diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 3c36cd0510de..e396e47b2f13 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -18,7 +18,9 @@ select: properties: compatible: contains: - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" + anyOf: + - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" + - enum: ["microchip,24aa025e48", "microchip,24aa025e64"] required: - compatible @@ -103,9 +105,6 @@ properties: # These are special cases that don't conform to the above pattern. # Each requires a standard at24 model as fallback. - items: - - const: belling,bl24c16a - - const: atmel,24c16 - - items: - enum: - rohm,br24g01 - rohm,br24t01 @@ -122,16 +121,25 @@ properties: - rohm,br24g04 - const: atmel,24c04 - items: - - const: renesas,r1ex24016 + - enum: + - belling,bl24c16a + - renesas,r1ex24016 - const: atmel,24c16 - items: - const: giantec,gt24c32a - const: atmel,24c32 - items: + - const: onnn,n24s64b + - const: atmel,24c64 + - items: - enum: - renesas,r1ex24128 - samsung,s524ad0xd1 - const: atmel,24c128 + - items: + - const: microchip,24aa025e48 + - items: + - const: microchip,24aa025e64 - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st label: diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 7de2c29606e5..4d823f3b1f0e 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -72,14 +72,17 @@ properties: - const: tx - const: tx_reply - const: rx + - const: rx_reply minItems: 2 mboxes: description: List of phandle and mailbox channel specifiers. It should contain - exactly one, two or three mailboxes; the first one or two for transmitting - messages ("tx") and another optional ("rx") for receiving notifications - and delayed responses, if supported by the platform. + exactly one, two, three or four mailboxes; the first one or two for + transmitting messages ("tx") and another optional ("rx") for receiving + notifications and delayed responses, if supported by the platform. + The optional ("rx_reply") is for notifications completion interrupt, + if supported by the platform. The number of mailboxes needed for transmitting messages depends on the type of channels exposed by the specific underlying mailbox controller; one single channel descriptor is enough if such channel is bidirectional, @@ -92,9 +95,10 @@ properties: 2 mbox / 2 shmem => SCMI TX and RX over 2 mailbox bidirectional channels 2 mbox / 1 shmem => SCMI TX over 2 mailbox unidirectional channels 3 mbox / 2 shmem => SCMI TX and RX over 3 mailbox unidirectional channels + 4 mbox / 2 shmem => SCMI TX and RX over 4 mailbox unidirectional channels Any other combination of mboxes and shmem is invalid. minItems: 1 - maxItems: 3 + maxItems: 4 shmem: description: @@ -251,7 +255,9 @@ properties: type: object allOf: - $ref: '#/$defs/protocol-node' - - $ref: /schemas/pinctrl/pinctrl.yaml + - anyOf: + - $ref: /schemas/pinctrl/pinctrl.yaml + - $ref: /schemas/firmware/nxp,imx95-scmi-pinctrl.yaml unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml b/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml new file mode 100644 index 000000000000..af9249695ef5 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/cznic,turris-omnia-mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CZ.NIC's Turris Omnia MCU + +maintainers: + - Marek Behún <kabel@kernel.org> + +description: + The MCU on Turris Omnia acts as a system controller providing additional + GPIOs, interrupts, watchdog, system power off and wakeup configuration. + +properties: + compatible: + const: cznic,turris-omnia-mcu + + reg: + description: MCU I2C slave address + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: | + The first cell specifies the interrupt number (0 to 63), the second cell + specifies interrupt type (which can be one of IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH). + The interrupt numbers correspond sequentially to GPIO numbers, taking the + GPIO banks into account: + IRQ number GPIO bank GPIO pin within bank + 0 - 15 0 0 - 15 + 16 - 47 1 0 - 31 + 48 - 63 2 0 - 15 + There are several exceptions: + IRQ number meaning + 11 LED panel brightness changed by button press + 13 TRNG entropy ready + 14 ECDSA message signature computation done + + gpio-controller: true + + '#gpio-cells': + const: 3 + description: + The first cell is bank number (0, 1 or 2), the second cell is pin number + within the bank (0 to 15 for banks 0 and 2, 0 to 31 for bank 1), and the + third cell specifies consumer flags. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - gpio-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + system-controller@2a { + compatible = "cznic,turris-omnia-mcu"; + reg = <0x2a>; + + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_NONE>; + + gpio-controller; + #gpio-cells = <3>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml new file mode 100644 index 000000000000..a96fc6cce502 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2024 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX System Control and Management Interface (SCMI) Pinctrl Protocol + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +allOf: + - $ref: /schemas/pinctrl/pinctrl.yaml + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + unevaluatedProperties: false + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx95-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. + Please refer to i.MX95 Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 47d3d2d52acd..2cc83771d8e7 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -93,6 +93,11 @@ properties: protocol to handle sleeping SCM calls. maxItems: 1 + memory-region: + description: + Phandle to the memory region reserved for the shared memory bridge to TZ. + maxItems: 1 + qcom,sdi-enabled: description: Indicates that the SDI (Secure Debug Image) has been enabled by TZ @@ -193,6 +198,16 @@ allOf: then: properties: interrupts: false + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,scm-sa8775p + then: + properties: + memory-region: false required: - compatible diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml new file mode 100644 index 000000000000..dfcc2fafa68d --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed FSI master + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + The AST2600 and later contain two identical FSI masters. They share a + clock and have a separate interrupt line and output pins. + +properties: + compatible: + enum: + - aspeed,ast2600-fsi-master + - aspeed,ast2700-fsi-master + + clocks: + maxItems: 1 + + cfam-reset-gpios: + maxItems: 1 + description: + Output GPIO pin for CFAM reset + + fsi-routing-gpios: + maxItems: 1 + description: + Output GPIO pin for setting the FSI mux (internal or cabled) + + fsi-mux-gpios: + maxItems: 1 + description: + Input GPIO pin for detecting the desired FSI mux state + + interrupts: + maxItems: 1 + +if: + properties: + compatible: + contains: + enum: + - aspeed,ast2600-fsi-master +then: + properties: + reg: + maxItems: 1 +else: + properties: + reg: + minItems: 1 + items: + - description: OPB control registers + - description: FSI controller registers + - description: FSI link address space + reg-names: + items: + - const: opb + - const: ctrl + - const: fsi + +required: + - compatible + - reg + - clocks + - interrupts + +allOf: + - $ref: fsi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + #include <dt-bindings/gpio/aspeed-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + fsi-master@1e79b000 { + compatible = "aspeed,ast2600-fsi-master"; + reg = <0x1e79b000 0x94>; + #address-cells = <2>; + #size-cells = <0>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi1_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + }; + }; + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + fsi-master@21800000 { + compatible = "aspeed,ast2700-fsi-master"; + reg = <0x0 0x21800000 0x0 0x100>, + <0x0 0x21000000 0x0 0x1000>, + <0x0 0x20000000 0x0 0x1000000>; + reg-names = "opb", "ctrl", "fsi"; + #interrupt-cells = <1>; + interrupt-controller; + interrupts-extended = <&intc 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi0_default>; + clocks = <&syscon 40>; + }; + }; diff --git a/Documentation/devicetree/bindings/fsi/fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml new file mode 100644 index 000000000000..ffe191921b26 --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FSI Controller Common Properties + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The + FSI bus is connected to a CFAM (Common FRU Access Macro) which contains + various engines such as I2C controllers, SPI controllers, etc. + +properties: + "#address-cells": + const: 2 + + "#size-cells": + const: 0 + + '#interrupt-cells': + const: 1 + + bus-frequency: + minimum: 1 + maximum: 200000000 + + interrupt-controller: true + + no-scan-on-init: + $ref: /schemas/types.yaml#/definitions/flag + description: + The FSI controller cannot scan the bus during initialization. + +patternProperties: + "cfam@[0-9a-f],[0-9a-f]": + type: object + properties: + chip-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Processor index, a global unique chip ID which is used to identify + the physical location of the chip in a system specific way. + + bus-frequency: + minimum: 1 + maximum: 100000000 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + required: + - reg + + additionalProperties: true + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt deleted file mode 100644 index 9853fefff5d8..000000000000 --- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt +++ /dev/null @@ -1,36 +0,0 @@ -Device-tree bindings for AST2600 FSI master -------------------------------------------- - -The AST2600 contains two identical FSI masters. They share a clock and have a -separate interrupt line and output pins. - -Required properties: - - compatible: "aspeed,ast2600-fsi-master" - - reg: base address and length - - clocks: phandle and clock number - - interrupts: platform dependent interrupt description - - pinctrl-0: phandle to pinctrl node - - pinctrl-names: pinctrl state - -Optional properties: - - cfam-reset-gpios: GPIO for CFAM reset - - - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled) - - fsi-mux-gpios: GPIO for detecting the desired FSI mux state - - -Examples: - - fsi-master { - compatible = "aspeed,ast2600-fsi-master", "fsi-master"; - reg = <0x1e79b000 0x94>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fsi1_default>; - clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; - - fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; - fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; - - cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml index e2ca0b000471..ad5c83f48425 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -9,11 +9,10 @@ title: IBM FSI-attached SPI controllers maintainers: - Eddie James <eajames@linux.ibm.com> -description: | +description: This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this - node will always be a child of an FSI CFAM node; see fsi.txt for details on - FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of - SPI controllers. + node will always be a child of an FSI CFAM node. This FSI2SPI engine provides + access to a number of SPI controllers. properties: compatible: @@ -24,6 +23,17 @@ properties: items: - description: FSI slave address + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^spi@[0-9a-f]+$": + type: object + $ref: /schemas/spi/ibm,spi-fsi.yaml + required: - compatible - reg @@ -35,4 +45,22 @@ examples: fsi2spi@1c00 { compatible = "ibm,fsi2spi"; reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <1000000>; + }; + }; }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml index 442cecdc57cb..e49ace3ca339 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml +++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml @@ -26,7 +26,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: fsi-controller.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml new file mode 100644 index 000000000000..29ea80ff915e --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,p9-fsi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached FSI Hub Controller + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + The FSI Hub Controller is an FSI controller, providing a number of FSI links, + located on a CFAM. Therefore this node will always be a child of an FSI CFAM + node. + +properties: + compatible: + enum: + - ibm,p9-fsi-controller + + reg: + items: + - description: FSI slave address + +allOf: + - $ref: fsi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt deleted file mode 100644 index e73358075a90..000000000000 --- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt +++ /dev/null @@ -1,16 +0,0 @@ -Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC) ------------------------------------------------------------------------------ - -This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from -a service processor. See fsi.txt for details on bindings for FSI slave and CFAM -nodes. The OCC is not an FSI slave device itself, rather it is accessed -through the SBE FIFO. - -Required properties: - - compatible = "ibm,p9-occ" or "ibm,p10-occ" - -Examples: - - occ { - compatible = "ibm,p9-occ"; - }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml new file mode 100644 index 000000000000..537eac70447c --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached On-Chip Controller (OCC) + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + The POWER processor On-Chip Controller (OCC) helps manage power and + thermals for the system, accessed through the FSI-attached SBEFIFO + from a service processor. + +properties: + compatible: + enum: + - ibm,p9-occ + - ibm,p10-occ + + hwmon: + type: object + $ref: /schemas/hwmon/ibm,occ-hwmon.yaml + +required: + - compatible + +additionalProperties: false + +examples: + - | + occ { + compatible = "ibm,p9-occ"; + + hwmon { + compatible = "ibm,p9-occ-hwmon"; + }; + }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml new file mode 100644 index 000000000000..3cd966fb3c0d --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached SBEFIFO engine + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + The SBEFIFO is an FSI CFAM engine that provides an interface to the + POWER processor Self Boot Engine (SBE). This node will always be a child + of an FSI CFAM node. + +properties: + compatible: + enum: + - ibm,p9-sbefifo + - ibm,odyssey-sbefifo + + reg: + items: + - description: FSI slave address + + occ: + type: object + $ref: ibm,p9-occ.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + fsi-slave-engine@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p9-occ"; + }; + }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml new file mode 100644 index 000000000000..8cd14a70bedf --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,p9-scom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached SCOM engine + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + The SCOM engine is an interface to the POWER processor PIB (Pervasive + Interconnect Bus). This node will always be a child of an FSI CFAM node. + +properties: + compatible: + enum: + - ibm,p9-scom + - ibm,i2cr-scom + + reg: + items: + - description: FSI slave address + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/fuse/renesas,rcar-efuse.yaml b/Documentation/devicetree/bindings/fuse/renesas,rcar-efuse.yaml new file mode 100644 index 000000000000..d7e289244e72 --- /dev/null +++ b/Documentation/devicetree/bindings/fuse/renesas,rcar-efuse.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fuse/renesas,rcar-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: R-Car E-FUSE connected to PFC + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The E-FUSE is a type of non-volatile memory, which is accessible through the + Pin Function Controller (PFC) on some R-Car Gen4 SoCs. + +properties: + compatible: + enum: + - renesas,r8a779a0-efuse # R-Car V3U + - renesas,r8a779f0-efuse # R-Car S4-8 + + reg: + maxItems: 1 + description: PFC System Group Fuse Control and Monitor register block + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + fuse: fuse@e6078800 { + compatible = "renesas,r8a779a0-efuse"; + reg = <0xe6078800 0x100>; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + }; diff --git a/Documentation/devicetree/bindings/fuse/renesas,rcar-otp.yaml b/Documentation/devicetree/bindings/fuse/renesas,rcar-otp.yaml new file mode 100644 index 000000000000..d74872ae9ff3 --- /dev/null +++ b/Documentation/devicetree/bindings/fuse/renesas,rcar-otp.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fuse/renesas,rcar-otp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: R-Car E-FUSE connected to OTP_MEM + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The E-FUSE is a type of non-volatile memory, which is accessible through the + One-Time Programmable Memory (OTP_MEM) module on some R-Car Gen4 SoCs. + +properties: + compatible: + enum: + - renesas,r8a779g0-otp # R-CarV4H + - renesas,r8a779h0-otp # R-CarV4M + + reg: + items: + - description: OTP_MEM_0 + - description: OTP_MEM_1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + otp: otp@e61be000 { + compatible = "renesas,r8a779g0-otp"; + reg = <0xe61be000 0x1000>, <0xe61bf000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml index 46bb121360dc..1046f0331c09 100644 --- a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml +++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml @@ -33,6 +33,11 @@ properties: gpio-controller: true + # Each SGPIO is represented as a pair of input and output GPIOs + gpio-line-names: + minItems: 160 + maxItems: 256 + '#gpio-cells': const: 2 @@ -41,6 +46,9 @@ properties: interrupt-controller: true + '#interrupt-cells': + const: 2 + clocks: maxItems: 1 @@ -55,6 +63,7 @@ required: - '#gpio-cells' - interrupts - interrupt-controller + - '#interrupt-cells' - ngpios - clocks - bus-frequency @@ -72,6 +81,7 @@ examples: reg = <0x1e780200 0x0100>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; + #interrupt-cells = <2>; ngpios = <80>; bus-frequency = <12000000>; }; diff --git a/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml b/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml new file mode 100644 index 000000000000..3dd70933ed8e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/atmel,at91rm9200-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip GPIO controller (PIO) + +maintainers: + - Manikandan Muralidharan <manikandan.m@microchip.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91sam9x5-gpio + - microchip,sam9x60-gpio + - const: atmel,at91rm9200-gpio + - items: + - enum: + - microchip,sam9x7-gpio + - const: microchip,sam9x60-gpio + - const: atmel,at91rm9200-gpio + - items: + - const: atmel,at91rm9200-gpio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + gpio-controller: true + gpio-line-names: true + + "#gpio-cells": + const: 2 + + clocks: + maxItems: 1 + + "#gpio-lines": + description: + Number of gpio, 32 by default if absent + maxItems: 1 + default: 32 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - gpio-controller + - "#gpio-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; +... diff --git a/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml new file mode 100644 index 000000000000..84fd82291ee4 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/fsl,qoriq-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,mpc5121-gpio + - fsl,mpc5125-gpio + - fsl,mpc8349-gpio + - fsl,mpc8572-gpio + - fsl,mpc8610-gpio + - fsl,pq3-gpio + - items: + - enum: + - fsl,ls1021a-gpio + - fsl,ls1028a-gpio + - fsl,ls1043a-gpio + - fsl,ls1046a-gpio + - fsl,ls1088a-gpio + - fsl,ls2080a-gpio + - const: fsl,qoriq-gpio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + gpio-line-names: + minItems: 1 + maxItems: 32 + + little-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + GPIO registers are used as little endian. If not + present registers are used as big endian by default. + +required: + - compatible + - reg + - interrupts + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + gpio@1100 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1100 0x080>; + interrupts = <78 0x8>; + gpio-controller; + #gpio-cells = <2>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + gpio@2300000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x2300000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml index 918776d16ef3..e1fc8bb6d379 100644 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX/MXC GPIO controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt deleted file mode 100644 index cd28e932bf50..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller - -Required properties: -- compatible : Should be "fsl,<soc>-gpio" - The following <soc>s are known to be supported: - mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq, - ls1021a, ls1043a, ls2080a, ls1028a, ls1088a. -- reg : Address and length of the register set for the device -- interrupts : Should be the port interrupt shared by all 32 pins. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - -Optional properties: -- little-endian : GPIO registers are used as little endian. If not - present registers are used as big endian by default. - -Example of gpio-controller node for a mpc5125 SoC: - -gpio0: gpio@1100 { - compatible = "fsl,mpc5125-gpio"; - #gpio-cells = <2>; - reg = <0x1100 0x080>; - interrupts = <78 0x8>; -}; - -Example of gpio-controller node for a ls2080a SoC: - -gpio0: gpio@2300000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <0 36 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; -}; - - -Example of gpio-controller node for a ls1028a/ls1088a SoC: - -gpio1: gpio@2300000 { - compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - little-endian; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml index dfa1133f8c5e..8ff54369d16c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml @@ -8,7 +8,6 @@ title: Freescale MXS GPIO controller maintainers: - Shawn Guo <shawnguo@kernel.org> - - Anson Huang <Anson.Huang@nxp.com> description: | The Freescale MXS GPIO controller is part of MXS PIN controller. diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml index 99febb8ea1b6..51e8390d6b32 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -66,6 +66,7 @@ properties: - ti,tca6408 - ti,tca6416 - ti,tca6424 + - ti,tca9535 - ti,tca9538 - ti,tca9539 - ti,tca9554 diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml index a27f92950257..cabda2eab4a2 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml @@ -51,6 +51,10 @@ properties: gpio-controller: true + gpio-line-names: + minItems: 1 + maxItems: 32 + clocks: items: - description: SoC GPIO clock diff --git a/Documentation/devicetree/bindings/gpio/gpio-zevio.txt b/Documentation/devicetree/bindings/gpio/gpio-zevio.txt deleted file mode 100644 index a37bd9ae2730..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-zevio.txt +++ /dev/null @@ -1,16 +0,0 @@ -Zevio GPIO controller - -Required properties: -- compatible: Should be "lsi,zevio-gpio" -- reg: Address and length of the register set for the device -- #gpio-cells: Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). -- gpio-controller: Marks the device node as a GPIO controller. - -Example: - gpio: gpio@90000000 { - compatible = "lsi,zevio-gpio"; - reg = <0x90000000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt deleted file mode 100644 index 29416f9c3220..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Atmel GPIO controller (PIO) - -Required properties: -- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5. -- reg: Should contain GPIO controller registers location and length -- interrupts: Should be the port interrupt shared by all the pins. -- #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify optional parameters to declare if the GPIO - is active high or low. See gpio.txt. -- gpio-controller: Marks the device node as a GPIO controller. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. The first cell is the pin number and the - second cell is used to specify irq type flags, see the two cell description - in interrupt-controller/interrupts.txt for details. - -optional properties: -- #gpio-lines: Number of gpio if absent 32. - - -Example: - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4>; - #gpio-cells = <2>; - gpio-controller; - #gpio-lines = <19>; - interrupt-controller; - #interrupt-cells = <2>; - }; - diff --git a/Documentation/devicetree/bindings/gpio/lsi,zevio-gpio.yaml b/Documentation/devicetree/bindings/gpio/lsi,zevio-gpio.yaml new file mode 100644 index 000000000000..e9e201a489e5 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/lsi,zevio-gpio.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/lsi,zevio-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zevio GPIO controller + +maintainers: + - Pratik Farkase <pratikfarkase94@gmail.com> + +properties: + compatible: + items: + - const: lsi,zevio-gpio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + +required: + - compatible + - reg + - "#gpio-cells" + - gpio-controller + +unevaluatedProperties: false + +examples: + - | + gpio@90000000 { + compatible = "lsi,zevio-gpio"; + reg = <0x90000000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index e796a1ff8c82..278399adc550 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -34,6 +34,7 @@ properties: - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable - items: - enum: + - mediatek,mt8188-mali - mediatek,mt8192-mali - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable @@ -195,7 +196,9 @@ allOf: properties: compatible: contains: - const: mediatek,mt8183b-mali + enum: + - mediatek,mt8183b-mali + - mediatek,mt8188-mali then: properties: power-domains: diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt deleted file mode 100644 index 6d154c4923de..000000000000 --- a/Documentation/devicetree/bindings/hwmon/g762.txt +++ /dev/null @@ -1,47 +0,0 @@ -GMT G762/G763 PWM Fan controller - -Required node properties: - - - "compatible": must be either "gmt,g762" or "gmt,g763" - - "reg": I2C bus address of the device - - "clocks": a fixed clock providing input clock frequency - on CLK pin of the chip. - -Optional properties: - - - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3. - The higher the more. - - - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty) - and 1 (negative duty). - - - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2. - -If an optional property is not set in .dts file, then current value is kept -unmodified (e.g. u-boot installed value). - -Additional information on operational parameters for the device is available -in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available -at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. - -Example g762 node: - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <8192>; - } - } - - g762: g762@3e { - compatible = "gmt,g762"; - reg = <0x3e>; - clocks = <&g762_clk> - fan_gear_mode = <0>; /* chip default */ - fan_startv = <1>; /* chip default */ - pwm_polarity = <0>; /* chip default */ - }; diff --git a/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml new file mode 100644 index 000000000000..8e1bffd252e6 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/gmt,g762.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GMT G761/G762/G763 PWM Fan controller + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: | + GMT G761/G762/G763 PWM Fan controller. + + G761 supports an internal-clock hence the clocks property is optional. + If not defined, internal-clock will be used. (31KHz is the clock of + the internal crystal oscillator) + + If an optional property is not set in DT, then current value is kept + unmodified (e.g. bootloader installed value). + + Additional information on operational parameters for the device is available + in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available + at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. + +properties: + compatible: + enum: + - gmt,g761 + - gmt,g762 + - gmt,g763 + + reg: + maxItems: 1 + + clocks: + description: a fixed clock providing input clock frequency on CLK + pin of the chip. + maxItems: 1 + + fan_startv: + description: Fan startup voltage step + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + pwm_polarity: + description: PWM polarity (positive or negative duty) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + fan_gear_mode: + description: FAN gear mode. Configure High speed fan setting factor + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + +required: + - compatible + - reg + +if: + properties: + compatible: + contains: + enum: + - gmt,g762 + - gmt,g763 +then: + required: + - clocks + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + + g761@1e { + compatible = "gmt,g761"; + reg = <0x1e>; + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml new file mode 100644 index 000000000000..4f5837a30773 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/maxim,max6639.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim max6639 + +maintainers: + - Naresh Solanki <naresh.solanki@9elements.com> + +description: | + The MAX6639 is a 2-channel temperature monitor with dual, automatic, PWM + fan-speed controller. It monitors its own temperature and one external + diode-connected transistor or the temperatures of two external diode-connected + transistors, typically available in CPUs, FPGAs, or GPUs. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf + +properties: + compatible: + enum: + - maxim,max6639 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pwm-cells': + const: 3 + +required: + - compatible + - reg + +patternProperties: + "^fan@[0-1]$": + type: object + description: + Represents the two fans and their specific configuration. + + $ref: fan-common.yaml# + + unevaluatedProperties: false + + properties: + reg: + description: + The fan number. + + required: + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fan1: fan-controller@10 { + compatible = "maxim,max6639"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <3>; + + fan@0 { + reg = <0x0>; + pulses-per-revolution = <2>; + max-rpm = <4000>; + target-rpm = <1000>; + pwms = <&fan1 0 25000 0>; + }; + + fan@1 { + reg = <0x1>; + pulses-per-revolution = <2>; + max-rpm = <8000>; + pwms = <&fan1 1 25000 0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml index df86c2c92037..6ae961732e6b 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml @@ -66,6 +66,14 @@ properties: description: phandle to the regulator that provides the VS supply typically in range from 2.7 V to 5.5 V. + ti,alert-polarity-active-high: + description: Alert pin is asserted based on the value of Alert polarity Bit + of Mask/Enable register. Default value is Normal (0 which maps to + active-low open collector). The other value is Inverted + (1 which maps to active-high open collector). Specify this property to set + the alert polarity to active-high. + $ref: /schemas/types.yaml#/definitions/flag + required: - compatible - reg @@ -88,5 +96,6 @@ examples: label = "vdd_3v0"; shunt-resistor = <1000>; vs-supply = <&vdd_3v0>; + ti,alert-polarity-active-high; }; }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml index 8b5307c875ff..0ad10d43fac0 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml @@ -9,6 +9,14 @@ title: TMP108 temperature sensor maintainers: - Krzysztof Kozlowski <krzk@kernel.org> +description: | + The TMP108 is a digital-output temperature sensor with a + dynamically-programmable limit window, and under- and overtemperature + alert functions. + + Datasheets: + https://www.ti.com/product/TMP108 + properties: compatible: enum: @@ -24,6 +32,9 @@ properties: "#thermal-sensor-cells": const: 0 + vcc-supply: + description: phandle to the regulator that provides the V+ supply + required: - compatible - reg @@ -45,6 +56,7 @@ examples: interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&tmp_alrt>; + vcc-supply = <&supply>; #thermal-sensor-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml index 26bed558c6b8..c4cc8af18280 100644 --- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml @@ -30,6 +30,9 @@ properties: clocks: minItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml index b2d19cfb87ad..e61cdb5b16ef 100644 --- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml @@ -26,6 +26,7 @@ properties: - microchip,sam9x60-i2c - items: - enum: + - microchip,sama7d65-i2c - microchip,sama7g5-i2c - microchip,sam9x7-i2c - const: microchip,sam9x60-i2c @@ -36,12 +37,6 @@ properties: interrupts: maxItems: 1 - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - clocks: maxItems: 1 @@ -72,8 +67,6 @@ required: - compatible - reg - interrupts - - "#address-cells" - - "#size-cells" - clocks allOf: @@ -86,6 +79,7 @@ allOf: - atmel,sama5d4-i2c - atmel,sama5d2-i2c - microchip,sam9x60-i2c + - microchip,sama7d65-i2c - microchip,sama7g5-i2c then: properties: diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml index 7070c04469ed..ac9ddf228c82 100644 --- a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml @@ -76,21 +76,21 @@ else: examples: - | - bsca: i2c@f0406200 { - clock-frequency = <390000>; - compatible = "brcm,brcmstb-i2c"; - interrupt-parent = <&irq0_intc>; - reg = <0xf0406200 0x58>; - interrupts = <0x18>; - interrupt-names = "upg_bsca"; - }; + bsca: i2c@f0406200 { + compatible = "brcm,brcmstb-i2c"; + reg = <0xf0406200 0x58>; + clock-frequency = <390000>; + interrupt-parent = <&irq0_intc>; + interrupts = <0x18>; + interrupt-names = "upg_bsca"; + }; - | - ddc0: i2c@7ef04500 { - compatible = "brcm,bcm2711-hdmi-i2c"; - reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; - reg-names = "bsc", "auto-i2c"; - clock-frequency = <390000>; - }; + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <390000>; + }; ... diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml index b813f6d4810c..1eaf00b90a77 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml @@ -109,65 +109,65 @@ examples: // Example for a bus to be demuxed. It contains various I2C clients for // HDMI, so the bus is named "i2c-hdmi": i2chdmi: i2c-mux3 { - compatible = "i2c-demux-pinctrl"; - i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; - i2c-bus-name = "i2c-hdmi"; - #address-cells = <1>; - #size-cells = <0>; - - ak4643: codec@12 { - compatible = "asahi-kasei,ak4643"; - #sound-dai-cells = <0>; - reg = <0x12>; - }; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep0>; - }; - }; + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; }; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cec_clock>; + clock-names = "cec"; + + avdd-supply = <&fixedregulator1v8>; + dvdd-supply = <&fixedregulator1v8>; + pvdd-supply = <&fixedregulator1v8>; + dvdd-3v-supply = <&fixedregulator3v3>; + bgvdd-supply = <&fixedregulator1v8>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; - clocks = <&cec_clock>; - clock-names = "cec"; - - avdd-supply = <&fixedregulator1v8>; - dvdd-supply = <&fixedregulator1v8>; - pvdd-supply = <&fixedregulator1v8>; - dvdd-3v-supply = <&fixedregulator3v3>; - bgvdd-supply = <&fixedregulator1v8>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; }; + }; }; + }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt deleted file mode 100644 index b1be2ceb7e69..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt +++ /dev/null @@ -1,40 +0,0 @@ -Device-tree bindings for FSI-attached I2C master and busses ------------------------------------------------------------ - -Required properties: - - compatible = "ibm,i2c-fsi"; - - reg = < address size >; : The FSI CFAM address and address - space size. - - #address-cells = <1>; : Number of address cells in child - nodes. - - #size-cells = <0>; : Number of size cells in child nodes. - - child nodes : Nodes to describe busses off the I2C - master. - -Child node required properties: - - reg = < port number > : The port number on the I2C master. - -Child node optional properties: - - child nodes : Nodes to describe devices on the I2C - bus. - -Examples: - - i2c@1800 { - compatible = "ibm,i2c-fsi"; - reg = < 0x1800 0x400 >; - #address-cells = <1>; - #size-cells = <0>; - - i2c-bus@0 { - reg = <0>; - }; - - i2c-bus@1 { - reg = <1>; - - eeprom@50 { - compatible = "vendor,dev-name"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml index 54d500be6aaa..1dcb9c78de3b 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Low Power Inter IC (LPI2C) for i.MX maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt deleted file mode 100644 index 4101aa621ad4..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt +++ /dev/null @@ -1,33 +0,0 @@ -NXP I2C controller for LPC2xxx/178x/18xx/43xx - -Required properties: - - compatible: must be "nxp,lpc1788-i2c" - - reg: physical address and length of the device registers - - interrupts: a single interrupt specifier - - clocks: clock for the device - - #address-cells: should be <1> - - #size-cells: should be <0> - -Optional properties: -- clock-frequency: the desired I2C bus clock frequency in Hz; in - absence of this property the default value is used (100 kHz). - -Example: -i2c0: i2c@400a1000 { - compatible = "nxp,lpc1788-i2c"; - reg = <0x400a1000 0x1000>; - interrupts = <18>; - clocks = <&ccu1 CLK_APB1_I2C0>; - #address-cells = <1>; - #size-cells = <0>; -}; - -&i2c0 { - clock-frequency = <400000>; - - lm75@48 { - compatible = "nxp,lm75"; - reg = <0x48>; - }; -}; - diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml index f34cc7ad5a00..4a93d1f78f93 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml @@ -57,6 +57,9 @@ properties: last value used. $ref: /schemas/types.yaml#/definitions/uint32 + settle-time-us: + description: Delay to wait before doing any transfer when a new bus gets selected. + allOf: - $ref: i2c-mux.yaml diff --git a/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml new file mode 100644 index 000000000000..40ea82942e4d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached I2C controller + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + This I2C controller is an FSI CFAM engine, providing access to a number of + I2C busses. Therefore this node will always be a child of an FSI CFAM node. + +properties: + compatible: + enum: + - ibm,i2c-fsi + + reg: + items: + - description: FSI slave address + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^i2c-bus@[0-9a-f]+$": + type: object + properties: + reg: + maxItems: 1 + + required: + - reg + + allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + i2c-bus@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c-bus@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml index 424a4fc218b6..92fbc1a2671a 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml @@ -87,12 +87,6 @@ properties: interrupts: maxItems: 1 - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - clocks: minItems: 1 maxItems: 2 diff --git a/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml b/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml new file mode 100644 index 000000000000..9a1b95c2d03c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nxp,lpc1788-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP I2C controller for LPC2xxx/178x/18xx/43xx + +maintainers: + - Vladimir Zapolskiy <vz@mleia.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: nxp,lpc1788-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + description: the desired I2C bus clock frequency in Hz + default: 100000 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include "dt-bindings/clock/lpc18xx-ccu.h" + + i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index daf4e71b8e7f..c33ae7b63b84 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -31,6 +31,8 @@ properties: - qcom,sm6350-cci - qcom,sm8250-cci - qcom,sm8450-cci + - qcom,sm8550-cci + - qcom,sm8650-cci - const: qcom,msm8996-cci # CCI v2 "#address-cells": @@ -195,6 +197,24 @@ allOf: - const: cpas_ahb - const: cci + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8550-cci + - qcom,sm8650-cci + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: cci + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml index 17c1102562be..551cfa6f885a 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml @@ -44,11 +44,11 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> iic0: i2c@e0070000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-emev2"; - reg = <0xe0070000 0x28>; - interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; - clocks = <&iic0_sclk>; - clock-names = "sclk"; + compatible = "renesas,iic-emev2"; + reg = <0xe0070000 0x28>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + clocks = <&iic0_sclk>; + clock-names = "sclk"; + #address-cells = <1>; + #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml index 51b220da461b..6cc60c3f61cd 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml @@ -153,14 +153,14 @@ examples: #include <dt-bindings/power/r8a7791-sysc.h> i2c0: i2c@e6508000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; - reg = <0xe6508000 0x40>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <400000>; - clocks = <&cpg CPG_MOD 931>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 931>; - i2c-scl-internal-delay-ns = <6>; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; + reg = <0xe6508000 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml index 91ecf17b7a81..7993fe463c4c 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -97,21 +97,21 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> i2c0: i2c@fcfee000 { - compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; - reg = <0xfcfee000 0x44>; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali", - "tmoi"; - clocks = <&mstp9_clks R7S72100_CLK_I2C0>; - clock-frequency = <100000>; - power-domains = <&cpg_clocks>; - #address-cells = <1>; - #size-cells = <0>; + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee000 0x44>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali", + "tmoi"; + clocks = <&mstp9_clks R7S72100_CLK_I2C0>; + clock-frequency = <100000>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml index 04e4ffd80bc0..ec5222a1224f 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml @@ -134,16 +134,16 @@ examples: #include <dt-bindings/power/r8a7790-sysc.h> iic0: i2c@e6500000 { - compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0xe6500000 0x425>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 318>; - clock-frequency = <400000>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 318>; - #address-cells = <1>; - #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0xe6500000 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + clock-frequency = <400000>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 318>; + #address-cells = <1>; + #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml index 1303502cf265..bbc568485627 100644 --- a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml @@ -26,9 +26,6 @@ properties: - samsung,exynos850-i2c - const: samsung,s3c2440-i2c - '#address-cells': - const: 1 - clocks: maxItems: 1 @@ -73,9 +70,6 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: Pandle to syscon used to control the system registers. - '#size-cells': - const: 0 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml index d9293c57f573..60035a787e5c 100644 --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -33,6 +33,10 @@ properties: - const: snps,designware-i2c - description: Baikal-T1 SoC System I2C controller const: baikal,bt1-sys-i2c + - description: T-HEAD TH1520 SoCs I2C controller + items: + - const: thead,th1520-i2c + - const: snps,designware-i2c reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 8fd8be76875e..457bb0702ed9 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -145,31 +145,31 @@ examples: #include <dt-bindings/mfd/stm32f7-rcc.h> #include <dt-bindings/clock/stm32fx-clock.h> //Example 1 (with st,stm32f4-i2c compatible) - i2c@40005400 { - compatible = "st,stm32f4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40005400 0x400>; - interrupts = <31>, - <32>; - resets = <&rcc 277>; - clocks = <&rcc 0 149>; - }; + i2c@40005400 { + compatible = "st,stm32f4-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc 277>; + clocks = <&rcc 0 149>; + #address-cells = <1>; + #size-cells = <0>; + }; - | #include <dt-bindings/mfd/stm32f7-rcc.h> #include <dt-bindings/clock/stm32fx-clock.h> //Example 2 (with st,stm32f7-i2c compatible) - i2c@40005800 { - compatible = "st,stm32f7-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40005800 0x400>; - interrupts = <31>, - <32>; - resets = <&rcc STM32F7_APB1_RESET(I2C1)>; - clocks = <&rcc 1 CLK_I2C1>; - }; + i2c@40005800 { + compatible = "st,stm32f7-i2c"; + reg = <0x40005800 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F7_APB1_RESET(I2C1)>; + clocks = <&rcc 1 CLK_I2C1>; + #address-cells = <1>; + #size-cells = <0>; + }; - | #include <dt-bindings/mfd/stm32f7-rcc.h> @@ -178,16 +178,16 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/reset/stm32mp1-resets.h> - i2c@40013000 { - compatible = "st,stm32mp15-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40013000 0x400>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc I2C2_K>; - resets = <&rcc I2C2_R>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - st,syscfg-fmp = <&syscfg 0x4 0x2>; - }; + i2c@40013000 { + compatible = "st,stm32mp15-i2c"; + reg = <0x40013000 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml index 781108ae1ce3..8c2e35fabf5b 100644 --- a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml @@ -37,16 +37,8 @@ properties: clock-names: const: fck - clock-frequency: true - power-domains: true - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - ti,hwmods: description: Must be "i2c<n>", n being the instance number (1-based). @@ -55,38 +47,34 @@ properties: $ref: /schemas/types.yaml#/definitions/string deprecated: true -# subnode's properties -patternProperties: - "@[0-9a-f]+$": - type: object - description: - Flash device uses the below defined properties in the subnode. - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + - if: + properties: + compatible: + enum: + - ti,omap2420-i2c + - ti,omap2430-i2c + - ti,omap3-i2c + - ti,omap4-i2c -if: - properties: - compatible: - enum: - - ti,omap2420-i2c - - ti,omap2430-i2c - - ti,omap3-i2c - - ti,omap4-i2c + then: + properties: + ti,hwmods: + items: + - pattern: "^i2c([1-9])$" -then: - properties: - ti,hwmods: - items: - - pattern: "^i2c([1-9])$" + else: + properties: + ti,hwmods: false -else: - properties: - ti,hwmods: false +unevaluatedProperties: false examples: - | @@ -94,9 +82,9 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> main_i2c0: i2c@2000000 { - compatible = "ti,j721e-i2c", "ti,omap4-i2c"; - reg = <0x2000000 0x100>; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - }; + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x2000000 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml index 113957ebe9f1..e25fa72fd785 100644 --- a/Documentation/devicetree/bindings/i3c/i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml @@ -91,6 +91,7 @@ patternProperties: - const: 0 - description: | Shall encode the I3C LVR (Legacy Virtual Register): + See include/dt-bindings/i3c/i3c.h bit[31:8]: unused/ignored bit[7:5]: I2C device index. Possible values: * 0: I2C device has a 50 ns spike filter @@ -153,6 +154,8 @@ additionalProperties: true examples: - | + #include <dt-bindings/i3c/i3c.h> + i3c@d040000 { compatible = "cdns,i3c-master"; clocks = <&coreclock>, <&i3csysclock>; @@ -166,7 +169,7 @@ examples: /* I2C device. */ eeprom@57 { compatible = "atmel,24c01"; - reg = <0x57 0x0 0x10>; + reg = <0x57 0x0 (I2C_FM | I2C_FILTER)>; pagesize = <0x8>; }; diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml index c0e805e531be..4fc13e3c0f75 100644 --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml @@ -20,7 +20,16 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + items: + - description: Core clock + - description: APB clock + + clock-names: + minItems: 1 + items: + - const: core + - const: apb interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml index 36775f8f71df..8e7835cf36fd 100644 --- a/Documentation/devicetree/bindings/iio/adc/adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml @@ -38,6 +38,25 @@ properties: The first value specifies the positive input pin, the second specifies the negative input pin. + single-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When devices combine single-ended and differential channels, allow the + channel for a single element to be specified, independent of reg (as for + differential channels). If this and diff-channels are not present reg + shall be used instead. + + common-mode-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Some ADCs have differential input pins that can be used to measure + single-ended or pseudo-differential inputs. This property can be used + in addition to single-channel to signal software that this channel is + not differential but still specify two inputs. + + The input pair is specified by setting single-channel to the positive + input pin and common-mode-channel to the negative pin. + settling-time-us: description: Time between enabling the channel and first stable readings. @@ -50,4 +69,15 @@ properties: device design and can interact with other characteristics such as settling time. +anyOf: + - oneOf: + - required: + - reg + - diff-channels + - required: + - reg + - single-channel + - required: + - reg + additionalProperties: true diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml index ea6cfcd0aff4..17c5d39cc2c1 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml @@ -19,7 +19,18 @@ description: | primarily for measurement of signals close to DC but also delivers outstanding performance with input bandwidths out to ~10kHz. + Analog Devices AD411x ADC's: + The AD411X family encompasses a series of low power, low noise, 24-bit, + sigma-delta analog-to-digital converters that offer a versatile range of + specifications. They integrate an analog front end suitable for processing + fully differential/single-ended and bipolar voltage inputs. + Datasheets for supported chips: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf @@ -31,6 +42,11 @@ description: | properties: compatible: enum: + - adi,ad4111 + - adi,ad4112 + - adi,ad4114 + - adi,ad4115 + - adi,ad4116 - adi,ad7172-2 - adi,ad7172-4 - adi,ad7173-8 @@ -129,10 +145,56 @@ patternProperties: maximum: 15 diff-channels: + description: | + This property is used for defining the inputs of a differential + voltage channel. The first value is the positive input and the second + value is the negative input of the channel. + + Family AD411x supports a dedicated VINCOM voltage input. + To select it set the second channel to 16. + (VIN2, VINCOM) -> diff-channels = <2 16> + + There are special values that can be selected besides the voltage + analog inputs: + 21: REF+ + 22: REF− + + Supported only by AD7172-2, AD7172-4, AD7175-2, AD7175-8, AD7177-2, + must be paired together and can be used to monitor the power supply + of the ADC: + 19: ((AVDD1 − AVSS)/5)+ + 20: ((AVDD1 − AVSS)/5)− + items: minimum: 0 maximum: 31 + single-channel: + description: | + This property is used for defining a current channel or the positive + input of a voltage channel (single-ended or pseudo-differential). + + Models AD4111 and AD4112 support current channels. + Example: (IIN2+, IIN2−) -> single-channel = <2> + To correctly configure a current channel set the "adi,current-channel" + property to true. + + To configure a single-ended/pseudo-differential channel set the + "common-mode-channel" property to the desired negative voltage input. + + When used as a voltage channel, special inputs are valid as well. + minimum: 0 + maximum: 31 + + common-mode-channel: + description: + This property is used for defining the negative input of a + single-ended or pseudo-differential voltage channel. + + Special inputs are valid as well. + minimum: 0 + maximum: 31 + adi,reference-select: description: | Select the reference source to use when converting on @@ -154,9 +216,31 @@ patternProperties: - avdd default: refout-avss + adi,current-channel: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Signal that the selected inputs are current channels. + Only available on AD4111 and AD4112. + required: - reg - - diff-channels + + allOf: + - oneOf: + - required: [single-channel] + properties: + diff-channels: false + - required: [diff-channels] + properties: + single-channel: false + adi,current-channel: false + common-mode-channel: false + + - if: + required: [common-mode-channel] + then: + properties: + adi,current-channel: false required: - compatible @@ -166,7 +250,6 @@ allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# # Only ad7172-4, ad7173-8 and ad7175-8 support vref2 - # Other models have [0-3] channel registers - if: properties: compatible: @@ -187,6 +270,37 @@ allOf: - vref - refout-avss - avdd + + - if: + properties: + compatible: + contains: + enum: + - adi,ad4114 + - adi,ad4115 + - adi,ad4116 + - adi,ad7173-8 + - adi,ad7175-8 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: + reg: + maximum: 15 + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7172-2 + - adi,ad7175-2 + - adi,ad7176-2 + - adi,ad7177-2 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: reg: maximum: 3 @@ -211,6 +325,34 @@ allOf: - adi,reference-select - if: + properties: + compatible: + contains: + enum: + - adi,ad4111 + - adi,ad4112 + - adi,ad4114 + - adi,ad4115 + - adi,ad4116 + then: + properties: + avdd2-supply: false + + - if: + properties: + compatible: + not: + contains: + enum: + - adi,ad4111 + - adi,ad4112 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: + adi,current-channel: false + + - if: anyOf: - required: [clock-names] - required: [clocks] @@ -221,6 +363,7 @@ allOf: unevaluatedProperties: false examples: + # Example AD7173-8 with external reference connected to REF+/REF-: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -277,3 +420,50 @@ examples: }; }; }; + + # Example AD4111 with current channel and single-ended channel: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4111"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "rdy"; + interrupt-parent = <&gpio>; + spi-max-frequency = <5000000>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + channel@0 { + reg = <0>; + bipolar; + diff-channels = <4 5>; + }; + + // Single ended channel VIN2/VINCOM + channel@1 { + reg = <1>; + bipolar; + single-channel = <2>; + common-mode-channel = <16>; + }; + + // Current channel IN2+/IN2- + channel@2 { + reg = <2>; + single-channel = <2>; + adi,current-channel; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 16def2985ab4..190889c7b62a 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -21,8 +21,15 @@ properties: - adi,ad7190 - adi,ad7192 - adi,ad7193 + - adi,ad7194 - adi,ad7195 + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + reg: maxItems: 1 @@ -41,6 +48,11 @@ properties: interrupts: maxItems: 1 + aincom-supply: + description: | + AINCOM voltage supply. Analog inputs AINx are referenced to this input + when configured for pseudo-differential operation. + dvdd-supply: description: DVdd voltage supply @@ -84,6 +96,41 @@ properties: description: see Documentation/devicetree/bindings/iio/adc/adc.yaml type: boolean +patternProperties: + "^channel@[0-9a-f]+$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + description: The channel index. + minimum: 0 + maximum: 271 + + diff-channels: + description: + Both inputs can be connected to pins AIN1 to AIN16 by choosing the + appropriate value from 1 to 16. + items: + minimum: 1 + maximum: 16 + + single-channel: + description: + Positive input can be connected to pins AIN1 to AIN16 by choosing the + appropriate value from 1 to 16. Negative input is connected to AINCOM. + minimum: 1 + maximum: 16 + + oneOf: + - required: + - reg + - diff-channels + - required: + - reg + - single-channel + required: - compatible - reg @@ -98,6 +145,17 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + enum: + - adi,ad7190 + - adi,ad7192 + - adi,ad7193 + - adi,ad7195 + then: + patternProperties: + "^channel@[0-9a-f]+$": false unevaluatedProperties: false @@ -117,6 +175,7 @@ examples: clock-names = "mclk"; interrupts = <25 0x2>; interrupt-parent = <&gpio>; + aincom-supply = <&aincom>; dvdd-supply = <&dvdd>; avdd-supply = <&avdd>; vref-supply = <&vref>; @@ -127,3 +186,38 @@ examples: adi,burnout-currents-enable; }; }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7194"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + clocks = <&ad7192_mclk>; + clock-names = "mclk"; + interrupts = <25 0x2>; + interrupt-parent = <&gpio>; + aincom-supply = <&aincom>; + dvdd-supply = <&dvdd>; + avdd-supply = <&avdd>; + vref-supply = <&vref>; + + channel@0 { + reg = <0>; + diff-channels = <1 6>; + }; + + channel@1 { + reg = <1>; + single-channel = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml new file mode 100644 index 000000000000..899b777017ce --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices Simultaneous Sampling Analog to Digital Converters + +maintainers: + - Michael Hennerich <Michael.Hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +description: | + * https://www.analog.com/en/products/ad7380.html + * https://www.analog.com/en/products/ad7381.html + * https://www.analog.com/en/products/ad7383.html + * https://www.analog.com/en/products/ad7384.html + * https://www.analog.com/en/products/ad7380-4.html + * https://www.analog.com/en/products/ad7381-4.html + * https://www.analog.com/en/products/ad7383-4.html + * https://www.analog.com/en/products/ad7384-4.html + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad7380 + - adi,ad7381 + - adi,ad7383 + - adi,ad7384 + - adi,ad7380-4 + - adi,ad7381-4 + - adi,ad7383-4 + - adi,ad7384-4 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 80000000 + spi-cpol: true + spi-cpha: true + + vcc-supply: + description: A 3V to 3.6V supply that powers the chip. + + vlogic-supply: + description: + A 1.65V to 3.6V supply for the logic pins. + + refio-supply: + description: + A 2.5V to 3.3V supply for the external reference voltage. When omitted, + the internal 2.5V reference is used. + + aina-supply: + description: + The common mode voltage supply for the AINA- pin on pseudo-differential + chips. + + ainb-supply: + description: + The common mode voltage supply for the AINB- pin on pseudo-differential + chips. + + ainc-supply: + description: + The common mode voltage supply for the AINC- pin on pseudo-differential + chips. + + aind-supply: + description: + The common mode voltage supply for the AIND- pin on pseudo-differential + chips. + + interrupts: + description: + When the device is using 1-wire mode, this property is used to optionally + specify the ALERT interrupt. + maxItems: 1 + +required: + - compatible + - reg + - vcc-supply + - vlogic-supply + +unevaluatedProperties: false + +allOf: + # pseudo-differential chips require common mode voltage supplies, + # true differential chips don't use them + - if: + properties: + compatible: + enum: + - adi,ad7383 + - adi,ad7384 + - adi,ad7383-4 + - adi,ad7384-4 + then: + required: + - aina-supply + - ainb-supply + else: + properties: + aina-supply: false + ainb-supply: false + - if: + properties: + compatible: + enum: + - adi,ad7383-4 + - adi,ad7384-4 + then: + required: + - ainc-supply + - aind-supply + else: + properties: + ainc-supply: false + aind-supply: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7380"; + reg = <0>; + + spi-cpol; + spi-cpha; + spi-max-frequency = <80000000>; + + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio0>; + + vcc-supply = <&supply_3_3V>; + vlogic-supply = <&supply_3_3V>; + refio-supply = <&supply_2_5V>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 7fa46df1f4fb..00fdaed11cbd 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -11,6 +11,7 @@ maintainers: description: | Analog Devices AD7606 Simultaneous Sampling ADC + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf @@ -19,9 +20,9 @@ properties: compatible: enum: - adi,ad7605-4 - - adi,ad7606-8 - - adi,ad7606-6 - adi,ad7606-4 + - adi,ad7606-6 + - adi,ad7606-8 # Referred to as AD7606 (without -8) in the datasheet - adi,ad7606b - adi,ad7616 diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml index 7e8328e9ce13..f748f3a60b35 100644 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml @@ -66,6 +66,9 @@ properties: nvmem-cell-names: const: temperature_calib + power-domains: + maxItems: 1 + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml new file mode 100644 index 000000000000..6497c416094d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6359-auxadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6350 series PMIC AUXADC + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found + in some MediaTek PMICs, performing various PMIC related measurements + such as battery and PMIC internal voltage regulators temperatures, + accessory detection resistance (usually, for a 3.5mm audio jack) + other than voltages for various PMIC internal components. + +properties: + compatible: + enum: + - mediatek,mt6357-auxadc + - mediatek,mt6358-auxadc + - mediatek,mt6359-auxadc + + "#io-channel-cells": + const: 1 + +required: + - compatible + - "#io-channel-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index c1b1324fa132..2722edab1d9a 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -246,6 +246,10 @@ patternProperties: From common IIO binding. Used to pipe external sigma delta modulator or internal ADC output to DFSDM channel. + port: + $ref: /schemas/sound/audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index d605999ffe28..718f633c6e04 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -18,6 +18,7 @@ properties: enum: - ti,ads1015 - ti,ads1115 + - ti,tla2021 - ti,tla2024 reg: diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml new file mode 100644 index 000000000000..ba6850ab1f90 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1119.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADS1119 ADC + +maintainers: + - João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> + +description: + The TI ADS1119 is a precision 16-bit ADC over I2C that offers single-ended and + differential measurements using a multiplexed input. It features a programmable + gain, a programmable sample rate, an internal oscillator and voltage reference, + and a 50/60Hz rejection filter. + +properties: + compatible: + const: ti,ads1119 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + avdd-supply: true + dvdd-supply: true + + vref-supply: + description: + ADC external reference voltage (VREF). + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - avdd-supply + - dvdd-supply + +patternProperties: + "^channel@([0-6])$": + $ref: adc.yaml + type: object + properties: + reg: + minimum: 0 + maximum: 6 + + diff-channels: + description: + Differential input channels AIN0-AIN1, AIN2-AIN3 and AIN1-AIN2. + oneOf: + - items: + - const: 0 + - const: 1 + - items: + - const: 2 + - const: 3 + - items: + - const: 1 + - const: 2 + + single-channel: + description: + Single-ended input channels AIN0, AIN1, AIN2 and AIN3. + minimum: 0 + maximum: 3 + + oneOf: + - required: + - diff-channels + - required: + - single-channel + + required: + - reg + + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@40 { + compatible = "ti,ads1119"; + reg = <0x40>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + avdd-supply = <®_avdd_ads1119>; + dvdd-supply = <®_dvdd_ads1119>; + vref-supply = <®_vref_ads1119>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@0 { + reg = <0>; + single-channel = <0>; + }; + + channel@1 { + reg = <1>; + diff-channels = <0 1>; + }; + + channel@2 { + reg = <2>; + single-channel = <3>; + }; + + channel@3 { + reg = <3>; + single-channel = <1>; + }; + + channel@4 { + reg = <4>; + single-channel = <2>; + }; + + channel@5 { + reg = <5>; + diff-channels = <1 2>; + }; + + channel@6 { + reg = <6>; + diff-channels = <2 3>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.yaml b/Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.yaml new file mode 100644 index 000000000000..267033a68abb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/sciosense,ens160.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ScioSense ENS160 multi-gas sensor + +maintainers: + - Gustavo Silva <gustavograzs@gmail.com> + +description: | + Digital Multi-Gas Sensor for Monitoring Indoor Air Quality. + + Datasheet: + https://www.sciosense.com/wp-content/uploads/2023/12/ENS160-Datasheet.pdf + +properties: + compatible: + enum: + - sciosense,ens160 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + vddio-supply: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gas-sensor@52 { + compatible = "sciosense,ens160"; + reg = <0x52>; + interrupt-parent = <&gpio0>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + gas-sensor@0 { + compatible = "sciosense,ens160"; + reg = <0>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 8265d709094d..fc8b97f82077 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -13,13 +13,17 @@ maintainers: description: | Bindings for the Analog Devices AD3552R DAC device and similar. Datasheet can be found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad3541r.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad3551r.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf properties: compatible: enum: + - adi,ad3541r - adi,ad3542r + - adi,ad3551r - adi,ad3552r reg: @@ -92,13 +96,13 @@ patternProperties: maximum: 511 minimum: -511 - adi,gain-scaling-p-inv-log2: - description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2) + adi,gain-scaling-p: + description: GainP = 1 / ( 2 ^ adi,gain-scaling-p) $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2, 3] - adi,gain-scaling-n-inv-log2: - description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2) + adi,gain-scaling-n: + description: GainN = 1 / ( 2 ^ adi,gain-scaling-n) $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2, 3] @@ -107,8 +111,8 @@ patternProperties: required: - adi,gain-offset - - adi,gain-scaling-p-inv-log2 - - adi,gain-scaling-n-inv-log2 + - adi,gain-scaling-p + - adi,gain-scaling-n - adi,rfb-ohms required: @@ -128,7 +132,9 @@ allOf: properties: compatible: contains: - const: adi,ad3542r + enum: + - adi,ad3541r + - adi,ad3542r then: patternProperties: "^channel@([0-1])$": @@ -158,7 +164,9 @@ allOf: properties: compatible: contains: - const: adi,ad3552r + enum: + - adi,ad3551r + - adi,ad3552r then: patternProperties: "^channel@([0-1])$": @@ -182,6 +190,21 @@ allOf: - const: -10000000 - const: 10000000 + - if: + properties: + compatible: + contains: + enum: + - adi,ad3541r + - adi,ad3551r + then: + properties: + channel@1: false + channel@0: + properties: + reg: + const: 0 + required: - compatible - reg @@ -208,8 +231,8 @@ examples: reg = <1>; custom-output-range-config { adi,gain-offset = <5>; - adi,gain-scaling-p-inv-log2 = <1>; - adi,gain-scaling-n-inv-log2 = <2>; + adi,gain-scaling-p = <1>; + adi,gain-scaling-n = <2>; adi,rfb-ohms = <1>; }; }; diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml index 43cbf27114c7..d1d1311332f8 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml @@ -28,6 +28,12 @@ properties: clock-names: const: clkin + '#clock-cells': + const: 0 + + clock-output-names: + maxItems: 1 + gpios: maxItems: 1 description: Lock detect GPIO. diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml index 9b7ad609f7db..9d185f7bfdcb 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -30,12 +30,19 @@ properties: - adi,adis16467-2 - adi,adis16467-3 - adi,adis16500 + - adi,adis16501 - adi,adis16505-1 - adi,adis16505-2 - adi,adis16505-3 - adi,adis16507-1 - adi,adis16507-2 - adi,adis16507-3 + - adi,adis16575-2 + - adi,adis16575-3 + - adi,adis16576-2 + - adi,adis16576-3 + - adi,adis16577-2 + - adi,adis16577-3 reg: maxItems: 1 @@ -90,12 +97,19 @@ allOf: contains: enum: - adi,adis16500 + - adi,adis16501 - adi,adis16505-1 - adi,adis16505-2 - adi,adis16505-3 - adi,adis16507-1 - adi,adis16507-2 - adi,adis16507-3 + - adi,adis16575-2 + - adi,adis16575-3 + - adi,adis16576-2 + - adi,adis16576-3 + - adi,adis16577-2 + - adi,adis16577-3 then: properties: @@ -112,6 +126,23 @@ allOf: dependencies: adi,sync-mode: [ clocks ] + - if: + properties: + compatible: + contains: + enum: + - adi,adis16575-2 + - adi,adis16575-3 + - adi,adis16576-2 + - adi,adis16576-3 + - adi,adis16577-2 + - adi,adis16577-3 + + then: + properties: + spi-max-frequency: + maximum: 15000000 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml index 56e0dc20f5e4..e3eec38897bf 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml @@ -23,6 +23,12 @@ properties: - adi,adis16497-1 - adi,adis16497-2 - adi,adis16497-3 + - adi,adis16545-1 + - adi,adis16545-2 + - adi,adis16545-3 + - adi,adis16547-1 + - adi,adis16547-2 + - adi,adis16547-3 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml index 47cfba939ca6..3b0a2d8b2e91 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -16,7 +16,11 @@ description: | properties: compatible: - const: bosch,bmi160 + oneOf: + - const: bosch,bmi160 + - items: + - const: bosch,bmi120 + - const: bosch,bmi160 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml index 91c318746bf3..ecf2339e02f6 100644 --- a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml +++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml @@ -4,14 +4,19 @@ $id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Vishay VEML6075 UVA and UVB sensor +title: Vishay VEML6075 UVA/B and VEML6040 RGBW sensors maintainers: - Javier Carrasco <javier.carrasco.cruz@gmail.com> +description: + VEML6040 datasheet at https://www.vishay.com/docs/84276/veml6040.pdf + properties: compatible: - const: vishay,veml6075 + enum: + - vishay,veml6040 + - vishay,veml6075 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml b/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml index 6b54d32323fc..fbe8c2eb0857 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MAG3110 magnetometer sensor maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Jonathan Cameron <jic23@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index fff7e3d83a02..71c1ee33a393 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -26,6 +26,7 @@ properties: - st,lis2dw12 - st,lis2hh12 - st,lis2dh12-accel + - st,lis2ds12 - st,lis302dl - st,lis331dl-accel - st,lis331dlh-accel diff --git a/Documentation/devicetree/bindings/incomplete-devices.yaml b/Documentation/devicetree/bindings/incomplete-devices.yaml new file mode 100644 index 000000000000..cfc1d39441b1 --- /dev/null +++ b/Documentation/devicetree/bindings/incomplete-devices.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/incomplete-devices.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rejected, Legacy or Incomplete Devices + +maintainers: + - Rob Herring <robh@kernel.org> + +description: + Some devices will not or should not get a proper Devicetree bindings, but + their compatibles are present in Linux drivers for various reasons. + + Examples are devices using ACPI PRP0001 with non-updatable firmware/ACPI + tables or old PowerPC platforms without in-tree DTS. + + Following list of devices is an incomplete schema with a goal to pass DT schema + checks on undocumented compatibles but also reject any DTS file using such + un-approved compatible. + + Usage of any of following compatibles is not allowed in Devicetree sources, + even if they come from immutable firmware. + +properties: + compatible: + oneOf: + - description: + Rejected compatibles in Devicetree, but used in ACPI-based devices + with non-updatable firmware/ACPI tables (via ACPI PRP0001) + enum: + - broadcom,bcm5241 + - ltr,ltrf216a + + - description: Legacy compatibles used on Macintosh devices + enum: + - adm1030 + - bmac+ + - heathrow-media-bay + - keylargo-media-bay + - lm87cimt + - MAC,adm1030 + - MAC,ds1775 + - max6690 + - ohare-media-bay + - ohare-swim3 + - smu-sat + - swim3 + + - description: Legacy compatibles used on other PowerPC devices + enum: + - 1682m-rng + - IBM,lhca + - IBM,lhea + - IBM,lhea-ethernet + - mpc5200b-fec-phy + - mpc5200-serial + - mpc5200-sram + - ohci-be + - ohci-bigendian + - ohci-le + + - description: Legacy compatibles used on SPARC devices + enum: + - bq4802 + - ds1287 + - isa-m5819p + - isa-m5823p + - m5819 + - sab82532 + - SUNW,bbc-beep + - SUNW,bbc-i2c + - SUNW,CS4231 + - SUNW,ebus-pic16f747-env + - SUNW,kt-cwq + - SUNW,kt-mau + - SUNW,n2-cwq + - SUNW,n2-mau + - SUNW,niusl + - SUNW,smbus-beep + - SUNW,sun4v-console + - SUNW,sun4v-pci + - SUNW,vf-cwq + - SUNW,vf-mau + + - description: Incomplete and/or legacy compatibles for unknown devices + enum: + - electra-cf + - i2cpcf,8584 + - virtio,uml + + - description: Linux kernel unit tests and sample code + enum: + - audio-graph-card2-custom-sample + - compat1 + - compat2 + - compat3 + - linux,spi-loopback-test + - mailbox-test + - regulator-virtual-consumer + + - description: + Devices on MIPS platform, without any DTS users. These are + unlikely to get converted to DT schema. + enum: + - mti,ranchu + + - description: + Devices on PowerPC platform, without any DTS users. These are + unlikely to get converted to DT schema. + enum: + - fujitsu,coral + - fujitsu,lime + - fujitsu,MB86276 + - fujitsu,MB86277 + - fujitsu,MB86293 + - fujitsu,MB86294 + - fujitsu,mint + - ibm,axon-msic + - ibm,pmemory + - ibm,pmemory-v2 + - ibm,power-rng + - ibm,ppc4xx-spi + - ibm,sdram-4xx-ddr2 + - ibm,secureboot + - ibm,secureboot-v1 + - ibm,secureboot-v2 + - ibm,secvar-backend + - sgy,gpio-halt + - wrs,epld-localbus + +required: + - compatible + - broken-usage-of-incorrect-compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index c384bf0bb25d..6bdb8040be65 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -22,7 +22,9 @@ properties: - const: allwinner,sun8i-a83t-r-lradc - const: allwinner,sun50i-r329-lradc - items: - - const: allwinner,sun20i-d1-lradc + - enum: + - allwinner,sun50i-h616-lradc + - allwinner,sun20i-d1-lradc - const: allwinner,sun50i-r329-lradc reg: diff --git a/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml b/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml new file mode 100644 index 000000000000..89bd06864bd4 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cirrus,cs40l50.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS40L50 Advanced Haptic Driver + +maintainers: + - James Ogletree <jogletre@opensource.cirrus.com> + +description: + CS40L50 is a haptic driver with waveform memory, + integrated DSP, and closed-loop algorithms. + +properties: + compatible: + enum: + - cirrus,cs40l50 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-a-supply: + description: Power supply for internal analog circuits. + + vdd-p-supply: + description: Power supply for always-on circuits. + + vdd-io-supply: + description: Power supply for digital input/output. + + vdd-b-supply: + description: Power supply for the boost converter. + +required: + - compatible + - reg + - interrupts + - reset-gpios + - vdd-io-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptic-driver@34 { + compatible = "cirrus,cs40l50"; + reg = <0x34>; + interrupt-parent = <&gpio>; + interrupts = <113 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio 112 GPIO_ACTIVE_LOW>; + vdd-io-supply = <&vreg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt deleted file mode 100644 index 513d94d6e899..000000000000 --- a/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt +++ /dev/null @@ -1,60 +0,0 @@ -TI-NSPIRE Keypad - -Required properties: -- compatible: Compatible property value should be "ti,nspire-keypad". - -- reg: Physical base address of the peripheral and length of memory mapped - region. - -- interrupts: The interrupt number for the peripheral. - -- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the - maximum and minimum delay time is ~2000us and ~500us respectively - -- row-delay: How long to wait before scanning each row. - -- clocks: The clock this peripheral is attached to. - -- linux,keymap: The keymap to use - (see Documentation/devicetree/bindings/input/matrix-keymap.txt) - -Optional properties: -- active-low: Specify that the keypad is active low (i.e. logical low signifies - a key press). - -Example: - -input { - compatible = "ti,nspire-keypad"; - reg = <0x900E0000 0x1000>; - interrupts = <16>; - - scan-interval = <1000>; - row-delay = <200>; - - clocks = <&apb_pclk>; - - linux,keymap = < - 0x0000001c 0x0001001c 0x00040039 - 0x0005002c 0x00060015 0x0007000b - 0x0008000f 0x0100002d 0x01010011 - 0x0102002f 0x01030004 0x01040016 - 0x01050014 0x0106001f 0x01070002 - 0x010a006a 0x02000013 0x02010010 - 0x02020019 0x02030007 0x02040018 - 0x02050031 0x02060032 0x02070005 - 0x02080028 0x0209006c 0x03000026 - 0x03010025 0x03020024 0x0303000a - 0x03040017 0x03050023 0x03060022 - 0x03070008 0x03080035 0x03090069 - 0x04000021 0x04010012 0x04020020 - 0x0404002e 0x04050030 0x0406001e - 0x0407000d 0x04080037 0x04090067 - 0x05010038 0x0502000c 0x0503001b - 0x05040034 0x0505001a 0x05060006 - 0x05080027 0x0509000e 0x050a006f - 0x0600002b 0x0602004e 0x06030068 - 0x06040003 0x0605006d 0x06060009 - 0x06070001 0x0609000f 0x0708002a - 0x0709001d 0x070a0033 >; -}; diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml b/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml new file mode 100644 index 000000000000..ed3cfff13add --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,nspire-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-NSPIRE Keypad + +maintainers: + - Andrew Davis <afd@ti.com> + +allOf: + - $ref: input.yaml# + - $ref: matrix-keymap.yaml# + +properties: + compatible: + enum: + - ti,nspire-keypad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + scan-interval: + $ref: /schemas/types.yaml#/definitions/uint32 + description: How often to scan in us. Based on a APB speed of 33MHz, the + maximum and minimum delay time is ~2000us and ~500us respectively + + row-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: How long to wait between scanning each row in us. + + active-low: + description: Specify that the keypad is active low. + +required: + - compatible + - reg + - interrupts + - clocks + - scan-interval + - row-delay + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + keypad@900e0000 { + compatible = "ti,nspire-keypad"; + reg = <0x900e0000 0x1000>; + interrupts = <16>; + + clocks = <&apb_pclk>; + + scan-interval = <1000>; + row-delay = <200>; + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_ENTER) + MATRIX_KEY(0, 1, KEY_ENTER) + MATRIX_KEY(0, 4, KEY_SPACE) + MATRIX_KEY(0, 5, KEY_Z) + MATRIX_KEY(0, 6, KEY_Y) + MATRIX_KEY(0, 7, KEY_0) + >; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt index 81f6bda97d3c..399c87782935 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt @@ -57,6 +57,7 @@ Optional properties: pendown-gpio (u32). pendown-gpio GPIO handle describing the pin the !PENIRQ line is connected to. + ti,hsync-gpios GPIO line to poll for hsync wakeup-source use any event on touchscreen as wakeup event. (Legacy property support: "linux,wakeup") touchscreen-size-x General touchscreen binding, see [1]. diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 745e57c05176..379721027bf8 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -39,6 +39,7 @@ properties: - edt,edt-ft5406 - edt,edt-ft5506 - evervision,ev-ft5726 + - focaltech,ft5426 - focaltech,ft5452 - focaltech,ft6236 - focaltech,ft8719 diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml index 9dc25d30a0a8..1c7ae05a8c15 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml @@ -14,10 +14,14 @@ allOf: properties: compatible: - enum: - - eeti,exc3000 - - eeti,exc80h60 - - eeti,exc80h84 + oneOf: + - const: eeti,exc3000 + - const: eeti,exc80h60 + - const: eeti,exc80h84 + - items: + - enum: + - eeti,exc81w32 + - const: eeti,exc80h84 reg: const: 0x2a interrupts: diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt deleted file mode 100644 index c9f2c9f578e3..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Elan eKTF2127 I2C touchscreen controller - -Required properties: - - compatible : "elan,ektf2127" or "elan,ektf2132" - - reg : I2C slave address of the chip (0x40) - - interrupts : interrupt specification for the ektf2127 interrupt - - power-gpios : GPIO specification for the pin connected to the - ektf2127's wake input. This needs to be driven high - to take ektf2127 out of its low power state - -For additional optional properties see: touchscreen.txt - -Example: - -i2c@00000000 { - ektf2127: touchscreen@15 { - compatible = "elan,ektf2127"; - reg = <0x15>; - interrupt-parent = <&pio>; - interrupts = <6 11 IRQ_TYPE_EDGE_FALLING> - power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; -}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml new file mode 100644 index 000000000000..ff0ec3fd24c5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/elan,ektf2127.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elan eKTF2127 I2C touchscreen controller + +maintainers: + - Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - elan,ektf2127 + - elan,ektf2132 + - elan,ektf2232 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@15 { + compatible = "elan,ektf2127"; + reg = <0x15>; + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml index f42b23d532eb..f5cfacb5e966 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml @@ -15,6 +15,7 @@ allOf: properties: compatible: enum: + - himax,hx83100a - himax,hx83112b reg: diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml index 77ba280b3bdc..e24cbd960993 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - imagis,ist3032c + - imagis,ist3038 - imagis,ist3038b - imagis,ist3038c diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,mt8183-emi.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,mt8183-emi.yaml new file mode 100644 index 000000000000..017c8478b2a7 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/mediatek,mt8183-emi.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/mediatek,mt8183-emi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek External Memory Interface (EMI) Interconnect + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: | + EMI interconnect providers support system bandwidth requirements through + Dynamic Voltage Frequency Scaling Resource Collector (DVFSRC) hardware. + The provider is able to communicate with the DVFSRC through Secure Monitor + Call (SMC). + + ICC provider ICC Nodes + ---- ---- + _________ |CPU | |--- |VPU | + _____ | |----- ---- | ---- + | |->| DRAM | ---- | ---- + |DRAM |->|scheduler|----- |GPU | |--- |DISP| + | |->| (EMI) | ---- | ---- + |_____|->|_________|---. ----- | ---- + /|\ `-|MMSYS|--|--- |VDEC| + | ----- | ---- + | | ---- + | change DRAM freq |--- |VENC| + -------- | ---- + SMC --> | DVFSRC | | ---- + -------- |--- |IMG | + | ---- + | ---- + |--- |CAM | + ---- + +properties: + compatible: + enum: + - mediatek,mt8183-emi + - mediatek,mt8195-emi + + '#interconnect-cells': + const: 1 + +required: + - compatible + - '#interconnect-cells' + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml new file mode 100644 index 000000000000..732e9fa001a4 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,msm8953.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8953 Network-On-Chip interconnect + +maintainers: + - Barnabas Czeman <barnabas.czeman@mainlining.org> + +description: | + The Qualcomm MSM8953 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + + See also: + - dt-bindings/interconnect/qcom,msm8953.h + +properties: + compatible: + enum: + - qcom,msm8953-bimc + - qcom,msm8953-pcnoc + - qcom,msm8953-snoc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + '#interconnect-cells': + const: 2 + +patternProperties: + '^interconnect-[a-z0-9\-]+$': + type: object + $ref: qcom,rpm-common.yaml# + unevaluatedProperties: false + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + properties: + compatible: + const: qcom,msm8953-snoc-mm + + required: + - compatible + - '#interconnect-cells' + +required: + - compatible + - reg + - '#interconnect-cells' + +allOf: + - $ref: qcom,rpm-common.yaml# + - if: + properties: + compatible: + const: qcom,msm8953-pcnoc + + then: + properties: + clocks: + items: + - description: PCNOC USB3 AXI Clock. + + clock-names: + const: pcnoc_usb3_axi + + required: + - clocks + - clock-names + else: + properties: + clocks: false + clock-names: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8953.h> + + snoc: interconnect@580000 { + compatible = "qcom,msm8953-snoc"; + reg = <0x580000 0x16080>; + + #interconnect-cells = <2>; + + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8953-snoc-mm"; + + #interconnect-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 05067e197abe..2cd1f5590fd9 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -35,6 +35,7 @@ properties: - qcom,sm8250-cpu-bwmon - qcom,sm8550-cpu-bwmon - qcom,sm8650-cpu-bwmon + - qcom,x1e80100-cpu-bwmon - const: qcom,sdm845-bwmon # BWMON v4, unified register space - items: - enum: @@ -44,6 +45,7 @@ properties: - qcom,sm8250-llcc-bwmon - qcom,sm8550-llcc-bwmon - qcom,sm8650-llcc-bwmon + - qcom,x1e80100-llcc-bwmon - const: qcom,sc7280-llcc-bwmon - const: qcom,sc7280-llcc-bwmon # BWMON v5 - const: qcom,sdm845-llcc-bwmon # BWMON v5 @@ -72,7 +74,6 @@ required: - interconnects - interrupts - operating-points-v2 - - opp-table - reg additionalProperties: false diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml index b135597d9489..9fce7203bd42 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml @@ -35,6 +35,10 @@ properties: reg: maxItems: 1 + clocks: + minItems: 1 + maxItems: 2 + required: - compatible @@ -53,10 +57,50 @@ allOf: required: - reg + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre USB3 PRIM AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-aggre2-noc + then: + properties: + clocks: + items: + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-aggre1-noc + - qcom,sc7280-aggre2-noc + then: + required: + - clocks + else: + properties: + clocks: false + unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/qcom,gcc-sc7280.h> interconnect { compatible = "qcom,sc7280-clk-virt"; #interconnect-cells = <2>; @@ -69,3 +113,12 @@ examples: #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; + + interconnect@16e0000 { + reg = <0x016e0000 0x1c080>; + compatible = "qcom,sc7280-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml index 20ad4ad82ad6..aae676ba30ed 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -14,7 +14,10 @@ properties: oneOf: - const: fsl,imx-irqsteer - items: - - const: fsl,imx8m-irqsteer + - enum: + - fsl,imx8m-irqsteer + - fsl,imx8mp-irqsteer + - fsl,imx8qxp-irqsteer - const: fsl,imx-irqsteer reg: @@ -42,6 +45,9 @@ properties: clock-names: const: ipg + power-domains: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": @@ -70,6 +76,21 @@ required: - fsl,channel - fsl,num-irqs +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mp-irqsteer + - fsl,imx8qxp-irqsteer + then: + required: + - power-domains + else: + properties: + power-domains: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml index 887e565b9573..199b34fdbefc 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml @@ -8,7 +8,6 @@ title: Freescale Layerscape External Interrupt Controller maintainers: - Shawn Guo <shawnguo@kernel.org> - - Li Yang <leoyang.li@nxp.com> description: | Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA, diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-msi.yaml new file mode 100644 index 000000000000..9ba8d4d73351 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-msi.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-msi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape SCFG PCIe MSI controller + +description: | + This interrupt controller hardware is a second level interrupt controller that + is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based + platforms. If interrupt-parent is not provided, the default parent interrupt + controller will be used. + + Each PCIe node needs to have property msi-parent that points to + MSI controller node + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - fsl,ls1012a-msi + - fsl,ls1021a-msi + - fsl,ls1043a-msi + - fsl,ls1043a-v1.1-msi + - fsl,ls1046a-msi + + reg: + maxItems: 1 + + '#msi-cells': + const: 1 + + interrupts: + items: + - description: Shared MSI interrupt group 0 + - description: Shared MSI interrupt group 1 + - description: Shared MSI interrupt group 2 + - description: Shared MSI interrupt group 3 + minItems: 1 + +required: + - compatible + - reg + - msi-controller + - interrupts + +allOf: + - $ref: msi-controller.yaml + - if: + properties: + compatible: + contains: + enum: + - fsl,ls1046a-msi + then: + properties: + interrupts: + minItems: 4 + else: + properties: + interrupts: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + interrupt-controller@1571000 { + compatible = "fsl,ls1043a-msi"; + reg = <0x1571000 0x8>; + msi-controller; + #msi-cells = <1>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt deleted file mode 100644 index 454ce04d6787..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Freescale Layerscape SCFG PCIe MSI controller - -Required properties: - -- compatible: should be "fsl,<soc-name>-msi" to identify - Layerscape PCIe MSI controller block such as: - "fsl,ls1021a-msi" - "fsl,ls1043a-msi" - "fsl,ls1046a-msi" - "fsl,ls1043a-v1.1-msi" - "fsl,ls1012a-msi" -- msi-controller: indicates that this is a PCIe MSI controller node -- reg: physical base address of the controller and length of memory mapped. -- interrupts: an interrupt to the parent interrupt controller. - -This interrupt controller hardware is a second level interrupt controller that -is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based -platforms. If interrupt-parent is not provided, the default parent interrupt -controller will be used. -Each PCIe node needs to have property msi-parent that points to -MSI controller node - -Examples: - - msi1: msi-controller@1571000 { - compatible = "fsl,ls1043a-msi"; - reg = <0x0 0x1571000 0x0 0x8>, - msi-controller; - interrupts = <0 116 0x4>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt deleted file mode 100644 index 5fc03134a999..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt +++ /dev/null @@ -1,38 +0,0 @@ -Marvell Armada 370, 375, 38x, XP Interrupt Controller ------------------------------------------------------ - -Required properties: -- compatible: Should be "marvell,mpic" -- interrupt-controller: Identifies the node as an interrupt controller. -- msi-controller: Identifies the node as an PCI Message Signaled - Interrupt controller. -- #interrupt-cells: The number of cells to define the interrupts. Should be 1. - The cell is the IRQ number - -- reg: Should contain PMIC registers location and length. First pair - for the main interrupt registers, second pair for the per-CPU - interrupt registers. For this last pair, to be compliant with SMP - support, the "virtual" must be use (For the record, these registers - automatically map to the interrupt controller registers of the - current CPU) - -Optional properties: - -- interrupts: If defined, then it indicates that this MPIC is - connected as a slave to another interrupt controller. This is - typically the case on Armada 375 and Armada 38x, where the MPIC is - connected as a slave to the Cortex-A9 GIC. The provided interrupt - indicate to which GIC interrupt the MPIC output is connected. - -Example: - - mpic: interrupt-controller@d0020000 { - compatible = "marvell,mpic"; - #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-controller; - msi-controller; - reg = <0xd0020a00 0x1d0>, - <0xd0021070 0x58>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml new file mode 100644 index 000000000000..616a41c87352 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/marvell,mpic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 370, 375, 38x, 39x, XP Interrupt Controller + +maintainers: + - Marek Behún <kabel@kernel.org> + +description: | + The top-level interrupt controller on Marvell Armada 370 and XP. On these + platforms it also provides inter-processor interrupts. + + On Marvell Armada 375, 38x and 39x this controller is wired under ARM GIC. + + Provides MSI handling for the PCIe controllers. + +properties: + compatible: + const: marvell,mpic + + reg: + items: + - description: main registers + - description: per-cpu registers + + interrupts: + items: + - description: | + Parent interrupt on platforms where MPIC is not the top-level + interrupt controller. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + msi-controller: true + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + - msi-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + interrupt-controller@20a00 { + compatible = "marvell,mpic"; + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + msi-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml new file mode 100644 index 000000000000..b2adc7174177 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/microchip,lan966x-oic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN966x outband interrupt controller + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +description: | + The Microchip LAN966x outband interrupt controller (OIC) maps the internal + interrupt sources of the LAN966x device to an external interrupt. + When the LAN966x device is used as a PCI device, the external interrupt is + routed to the PCI interrupt. + +properties: + compatible: + const: microchip,lan966x-oic + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + - interrupts + - reg + +additionalProperties: false + +examples: + - | + interrupt-controller@e00c0120 { + compatible = "microchip,lan966x-oic"; + reg = <0xe00c0120 0x190>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0>; + interrupt-parent = <&intc>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml index 4bdc8321904b..985fa10abb99 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -30,6 +30,7 @@ properties: - qcom,sa8775p-pdc - qcom,sc7180-pdc - qcom,sc7280-pdc + - qcom,sc8180x-pdc - qcom,sc8280xp-pdc - qcom,sdm670-pdc - qcom,sdm845-pdc diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml index fb5593724059..833a01cdd1b1 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml @@ -25,6 +25,7 @@ properties: - items: - enum: - realtek,rtl8380-intc + - realtek,rtl9300-intc - const: realtek,rtl-intc - const: realtek,rtl-intc deprecated: true @@ -35,7 +36,10 @@ properties: const: 1 reg: - maxItems: 1 + minItems: 1 + items: + - description: vpe0 registers + - description: vpe1 registers interrupts: minItems: 1 @@ -71,6 +75,20 @@ allOf: else: required: - interrupts + - if: + properties: + compatible: + contains: + const: realtek,rtl9300-intc + then: + properties: + reg: + minItems: 2 + maxItems: 2 + else: + properties: + reg: + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml index daef4ee06f4e..44b6ae5fc802 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml @@ -21,13 +21,16 @@ description: | properties: compatible: - items: - - enum: - - renesas,r9a07g043u-irqc # RZ/G2UL - - renesas,r9a07g044-irqc # RZ/G2{L,LC} - - renesas,r9a07g054-irqc # RZ/V2L - - renesas,r9a08g045-irqc # RZ/G3S - - const: renesas,rzg2l-irqc + oneOf: + - items: + - enum: + - renesas,r9a07g043u-irqc # RZ/G2UL + - renesas,r9a07g044-irqc # RZ/G2{L,LC} + - renesas,r9a07g054-irqc # RZ/V2L + - renesas,r9a08g045-irqc # RZ/G3S + - const: renesas,rzg2l-irqc + + - const: renesas,r9a07g043f-irqc # RZ/Five '#interrupt-cells': description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt deleted file mode 100644 index 265b223cd978..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt +++ /dev/null @@ -1,52 +0,0 @@ -RISC-V Hart-Level Interrupt Controller (HLIC) ---------------------------------------------- - -RISC-V cores include Control Status Registers (CSRs) which are local to each -CPU core (HART in RISC-V terminology) and can be read or written by software. -Some of these CSRs are used to control local interrupts connected to the core. -Every interrupt is ultimately routed through a hart's HLIC before it -interrupts that hart. - -The RISC-V supervisor ISA manual specifies three interrupt sources that are -attached to every HLIC: software interrupts, the timer interrupt, and external -interrupts. Software interrupts are used to send IPIs between cores. The -timer interrupt comes from an architecturally mandated real-time timer that is -controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External -interrupts connect all other device interrupts to the HLIC, which are routed -via the platform-level interrupt controller (PLIC). - -All RISC-V systems that conform to the supervisor ISA specification are -required to have a HLIC with these three interrupt sources present. Since the -interrupt map is defined by the ISA it's not listed in the HLIC's device tree -entry, though external interrupt controllers (like the PLIC, for example) will -need to define how their interrupts map to the relevant HLICs. This means -a PLIC interrupt property will typically list the HLICs for all present HARTs -in the system. - -Required properties: -- compatible : "riscv,cpu-intc" -- #interrupt-cells : should be <1>. The interrupt sources are defined by the - RISC-V supervisor ISA manual, with only the following three interrupts being - defined for supervisor mode: - - Source 1 is the supervisor software interrupt, which can be sent by an SBI - call and is reserved for use by software. - - Source 5 is the supervisor timer interrupt, which can be configured by - SBI calls and implements a one-shot timer. - - Source 9 is the supervisor external interrupt, which chains to all other - device interrupts. -- interrupt-controller : Identifies the node as an interrupt controller - -Furthermore, this interrupt-controller MUST be embedded inside the cpu -definition of the hart whose CSRs control these local interrupts. - -An example device tree entry for a HLIC is show below. - - cpu1: cpu@1 { - compatible = "riscv"; - ... - cpu1-intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc"; - interrupt-controller; - }; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml new file mode 100644 index 000000000000..83256cc0bd5c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,cpu-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Hart-Level Interrupt Controller (HLIC) + +description: + RISC-V cores include Control Status Registers (CSRs) which are local to + each CPU core (HART in RISC-V terminology) and can be read or written by + software. Some of these CSRs are used to control local interrupts connected + to the core. Every interrupt is ultimately routed through a hart's HLIC + before it interrupts that hart. + + The RISC-V supervisor ISA manual specifies three interrupt sources that are + attached to every HLIC namely software interrupts, the timer interrupt, and + external interrupts. Software interrupts are used to send IPIs between + cores. The timer interrupt comes from an architecturally mandated real- + time timer that is controlled via Supervisor Binary Interface (SBI) calls + and CSR reads. External interrupts connect all other device interrupts to + the HLIC, which are routed via the platform-level interrupt controller + (PLIC). + + All RISC-V systems that conform to the supervisor ISA specification are + required to have a HLIC with these three interrupt sources present. Since + the interrupt map is defined by the ISA it's not listed in the HLIC's device + tree entry, though external interrupt controllers (like the PLIC, for + example) will need to define how their interrupts map to the relevant HLICs. + This means a PLIC interrupt property will typically list the HLICs for all + present HARTs in the system. + +maintainers: + - Palmer Dabbelt <palmer@dabbelt.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +properties: + compatible: + oneOf: + - items: + - const: andestech,cpu-intc + - const: riscv,cpu-intc + - const: riscv,cpu-intc + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The interrupt sources are defined by the RISC-V supervisor ISA manual, + with only the following three interrupts being defined for + supervisor mode: + - Source 1 is the supervisor software interrupt, which can be sent by + an SBI call and is reserved for use by software. + - Source 5 is the supervisor timer interrupt, which can be configured + by SBI calls and implements a one-shot timer. + - Source 9 is the supervisor external interrupt, which chains to all + other device interrupts. + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false + +examples: + - | + interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml index e20016f12017..a8409db4a3e3 100644 --- a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml @@ -17,7 +17,12 @@ properties: The content of the cell is the master ID. compatible: - const: allwinner,sun50i-h6-iommu + oneOf: + - const: allwinner,sun50i-h6-iommu + - const: allwinner,sun50i-h616-iommu + - items: + - const: allwinner,sun55i-a523-iommu + - const: allwinner,sun50i-h616-iommu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 5c130cf06a21..280b4e49f219 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -86,6 +86,7 @@ properties: - qcom,qcm2290-smmu-500 - qcom,sa8775p-smmu-500 - qcom,sc7280-smmu-500 + - qcom,sc8180x-smmu-500 - qcom,sc8280xp-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 @@ -95,6 +96,7 @@ properties: - qcom,sm8450-smmu-500 - qcom,sm8550-smmu-500 - qcom,sm8650-smmu-500 + - qcom,x1e80100-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 @@ -415,6 +417,7 @@ allOf: compatible: contains: enum: + - qcom,sc8180x-smmu-500 - qcom,sm6350-smmu-v2 - qcom,sm7150-smmu-v2 - qcom,sm8150-smmu-500 @@ -520,6 +523,7 @@ allOf: - enum: - qcom,sm8550-smmu-500 - qcom,sm8650-smmu-500 + - qcom,x1e80100-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 @@ -550,14 +554,12 @@ allOf: - nvidia,smmu-500 - qcom,qdu1000-smmu-500 - qcom,sc7180-smmu-500 - - qcom,sc8180x-smmu-500 - qcom,sdm670-smmu-500 - qcom,sdm845-smmu-500 - qcom,sdx55-smmu-500 - qcom,sdx65-smmu-500 - qcom,sm6350-smmu-500 - qcom,sm6375-smmu-500 - - qcom,x1e80100-smmu-500 then: properties: clock-names: false diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt deleted file mode 100644 index 20236385f26e..000000000000 --- a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt +++ /dev/null @@ -1,64 +0,0 @@ -* QCOM IOMMU - -The MSM IOMMU is an implementation compatible with the ARM VMSA short -descriptor page tables. It provides address translation for bus masters outside -of the CPU, each connected to the IOMMU through a port called micro-TLB. - -Required Properties: - - - compatible: Must contain "qcom,apq8064-iommu". - - reg: Base address and size of the IOMMU registers. - - interrupts: Specifiers for the MMU fault interrupts. For instances that - support secure mode two interrupts must be specified, for non-secure and - secure mode, in that order. For instances that don't support secure mode a - single interrupt must be specified. - - #iommu-cells: The number of cells needed to specify the stream id. This - is always 1. - - qcom,ncb: The total number of context banks in the IOMMU. - - clocks : List of clocks to be used during SMMU register access. See - Documentation/devicetree/bindings/clock/clock-bindings.txt - for information about the format. For each clock specified - here, there must be a corresponding entry in clock-names - (see below). - - - clock-names : List of clock names corresponding to the clocks specified in - the "clocks" property (above). - Should be "smmu_pclk" for specifying the interface clock - required for iommu's register accesses. - Should be "smmu_clk" for specifying the functional clock - required by iommu for bus accesses. - -Each bus master connected to an IOMMU must reference the IOMMU in its device -node with the following property: - - - iommus: A reference to the IOMMU in multiple cells. The first cell is a - phandle to the IOMMU and the second cell is the stream id. - A single master device can be connected to more than one iommu - and multiple contexts in each of the iommu. So multiple entries - are required to list all the iommus and the stream ids that the - master is connected to. - -Example: mdp iommu and its bus master - - mdp_port0: iommu@7500000 { - compatible = "qcom,apq8064-iommu"; - #iommu-cells = <1>; - clock-names = - "smmu_pclk", - "smmu_clk"; - clocks = - <&mmcc SMMU_AHB_CLK>, - <&mmcc MDP_AXI_CLK>; - reg = <0x07500000 0x100000>; - interrupts = - <GIC_SPI 63 0>, - <GIC_SPI 64 0>; - qcom,ncb = <2>; - }; - - mdp: qcom,mdp@5100000 { - compatible = "qcom,mdp"; - ... - iommus = <&mdp_port0 0 - &mdp_port0 2>; - }; diff --git a/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml new file mode 100644 index 000000000000..9f83f851e61a --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/iommu/qcom,apq8064-iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APQ8064 IOMMU + +maintainers: + - David Heidelberg <david@ixit.cz> + +description: + The MSM IOMMU is an implementation compatible with the ARM VMSA short + descriptor page tables. It provides address translation for bus masters + outside of the CPU, each connected to the IOMMU through a port called micro-TLB. + +properties: + compatible: + const: qcom,apq8064-iommu + + clocks: + items: + - description: interface clock for register accesses + - description: functional clock for bus accesses + + clock-names: + items: + - const: smmu_pclk + - const: iommu_clk + + reg: + maxItems: 1 + + interrupts: + description: Specifiers for the MMU fault interrupts. + minItems: 1 + items: + - description: non-secure mode interrupt + - description: secure mode interrupt (for instances which supports it) + + "#iommu-cells": + const: 1 + description: Each IOMMU specifier describes a single Stream ID. + + qcom,ncb: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The total number of context banks in the IOMMU. + minimum: 1 + maximum: 4 + +required: + - reg + - interrupts + - clocks + - clock-names + - qcom,ncb + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8960.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + iommu@7500000 { + compatible = "qcom,apq8064-iommu"; + reg = <0x07500000 0x100000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk SMMU_AHB_CLK>, + <&clk MDP_AXI_CLK>; + clock-names = "smmu_pclk", + "iommu_clk"; + #iommu-cells = <1>; + qcom,ncb = <2>; + }; diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml index a74eb899c381..571e5746d177 100644 --- a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml @@ -25,6 +25,7 @@ properties: - const: qcom,msm-iommu-v1 - items: - enum: + - qcom,msm8953-iommu - qcom,msm8976-iommu - const: qcom,msm-iommu-v2 diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml new file mode 100644 index 000000000000..482fae71dd53 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/ti,lm3509.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LM3509 High Efficiency Boost for White LED's and/or OLED Displays + +maintainers: + - Patrick Gansterer <paroga@paroga.com> + +description: + The LM3509 current mode boost converter offers two separate outputs. + https://www.ti.com/product/LM3509 + +properties: + compatible: + const: ti,lm3509 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reset-gpios: + maxItems: 1 + + ti,brightness-rate-of-change-us: + description: Brightness Rate of Change in microseconds. + enum: [51, 13000, 26000, 52000] + + ti,oled-mode: + description: Enable OLED mode. + type: boolean + +patternProperties: + "^led@[01]$": + type: object + description: Properties for a string of connected LEDs. + $ref: common.yaml# + + properties: + reg: + description: + The control register that is used to program the two current sinks. + The LM3509 has two registers (BMAIN and BSUB) and are represented + as 0 or 1 in this property. The two current sinks can be controlled + independently with both registers, or register BMAIN can be + configured to control both sinks with the led-sources property. + minimum: 0 + maximum: 1 + + label: true + + led-sources: + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + default-brightness: + minimum: 0 + maximum: 31 + default: 18 + + max-brightness: + minimum: 0 + maximum: 31 + default: 31 + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@36 { + compatible = "ti,lm3509"; + reg = <0x36>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + + ti,oled-mode; + ti,brightness-rate-of-change-us = <52000>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <12>; + max-brightness = <31>; + }; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@36 { + compatible = "ti,lm3509"; + reg = <0x36>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + default-brightness = <12>; + }; + + led@1 { + reg = <1>; + default-brightness = <15>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index e9d4514d0166..fe8aaecf3010 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -28,6 +28,7 @@ properties: - national,lp5523 - ti,lp55231 - ti,lp5562 + - ti,lp5569 - ti,lp8501 reg: @@ -151,6 +152,16 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/string description: name of channel +if: + not: + properties: + compatible: + contains: + const: ti,lp8501 +then: + properties: + pwr-sel: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/leds/silergy,sy7802.yaml b/Documentation/devicetree/bindings/leds/silergy,sy7802.yaml new file mode 100644 index 000000000000..46b8e5452b62 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/silergy,sy7802.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/silergy,sy7802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silergy SY7802 1800mA Boost Charge Pump LED Driver + +maintainers: + - André Apitzsch <git@apitzsch.eu> + +description: | + The SY7802 is a current-regulated charge pump which can regulate two current + levels for Flash and Torch modes. + + The SY7802 is a high-current synchronous boost converter with 2-channel + high side current sources. Each channel is able to deliver 900mA current. + +properties: + compatible: + enum: + - silergy,sy7802 + + reg: + maxItems: 1 + + enable-gpios: + maxItems: 1 + description: A connection to the 'EN' pin. + + flash-gpios: + maxItems: 1 + description: A connection to the 'FLEN' pin. + + vin-supply: + description: Regulator providing power to the 'VIN' pin. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[0-1]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: Index of the LED. + minimum: 0 + maximum: 1 + + led-sources: + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + required: + - reg + - led-sources + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + flash-led-controller@53 { + compatible = "silergy,sy7802"; + reg = <0x53>; + #address-cells = <1>; + #size-cells = <0>; + + enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml new file mode 100644 index 000000000000..c25eed4606fe --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Global Command Engine Common Properties + +maintainers: + - Houlong Wei <houlong.wei@mediatek.com> + +description: + The Global Command Engine (GCE) is an instruction based, multi-threaded, + single-core command dispatcher for MediaTek hardware. The Command Queue + (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux + mailbox framework. It is used to receive messages from mailbox consumers + and configure GCE to execute the specified instruction set in the message. + We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox + driver. A device driver that uses the CMDQ driver to configure its hardware + registers is a mailbox consumer. The mailbox consumer can request a mailbox + channel corresponding to a GCE hardware thread to send a message, specifying + that the GCE thread to configure its hardware. The mailbox provider can also + reserve a mailbox channel to configure GCE hardware register by the specific + GCE thread. This binding defines the common GCE properties for both mailbox + provider and consumers. + +properties: + mediatek,gce-events: + description: + GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023). + Each event ID has a boolean event value with the default value 0. + The property mediatek,gce-events is used to obtain the event IDs. + Some gce-events are hardware-bound and cannot be changed by software. + For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will + send an event signal to GCE, setting the value of event ID 597 to 1. + Similarly, in MT8188, the value of event ID 574 will be set to 1 when + VOD0_MUTEX is stream done. + On the other hand, some gce-events are not hardware-bound and can be + changed by software. For example, in MT8188, we can set the value of + event ID 855, which is not bound to any hardware, to 1 when the driver + in the secure world completes a task. However, in MT8195, event ID 855 + is already bound to VDEC_LAT1, so we need to select another event ID to + achieve the same purpose. This event ID can be any ID that is not bound + to any hardware and is not yet used in any software driver. + To determine if the event ID is bound to the hardware or used by a + software driver, refer to the GCE header + include/dt-bindings/gce/<chip>-gce.h of each chip. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml new file mode 100644 index 000000000000..f7342d04beec --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/qcom,cpucp-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. CPUCP Mailbox Controller + +maintainers: + - Sibi Sankar <quic_sibis@quicinc.com> + +description: + The CPUSS Control Processor (CPUCP) mailbox controller enables communication + between AP and CPUCP by acting as a doorbell between them. + +properties: + compatible: + items: + - const: qcom,x1e80100-cpucp-mbox + + reg: + items: + - description: CPUCP rx register region + - description: CPUCP tx register region + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@17430000 { + compatible = "qcom,x1e80100-cpucp-mbox"; + reg = <0x17430000 0x10000>, <0x18830000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml new file mode 100644 index 000000000000..0e7a7b5ac89f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc05a2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GalaxyCore gc05a2 1/5" 5M Pixel MIPI CSI-2 sensor + +maintainers: + - Zhi Mao <zhi.mao@mediatek.com> + +description: + The gc05a2 is a raw image sensor with an MIPI CSI-2 image data + interface and CCI (I2C compatible) control bus. The output format + is raw Bayer. + +properties: + compatible: + const: galaxycore,gc05a2 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + dovdd-supply: true + + avdd-supply: true + + dvdd-supply: true + + reset-gpios: + description: Reference to the GPIO connected to the RESETB pin. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + - items: + - const: 1 + - const: 2 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - dovdd-supply + - avdd-supply + - dvdd-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@37 { + compatible = "galaxycore,gc05a2"; + reg = <0x37>; + + clocks = <&gc05a2_clk>; + + reset-gpios = <&pio 21 GPIO_ACTIVE_LOW>; + + avdd-supply = <&gc05a2_avdd>; + dovdd-supply = <&gc05a2_dovdd>; + dvdd-supply = <&gc05a2_dvdd>; + + port { + sensor_out: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <448000000 224000000>; + remote-endpoint = <&seninf_csi_port_1_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml new file mode 100644 index 000000000000..51b8ece09c72 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc08a3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GalaxyCore gc08a3 1/4" 8M Pixel MIPI CSI-2 sensor + +maintainers: + - Zhi Mao <zhi.mao@mediatek.com> + +description: + The gc08a3 is a raw image sensor with an MIPI CSI-2 image data + interface and CCI (I2C compatible) control bus. The output format + is raw Bayer. + +properties: + compatible: + const: galaxycore,gc08a3 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + dovdd-supply: true + + avdd-supply: true + + dvdd-supply: true + + reset-gpios: + description: Reference to the GPIO connected to the RESETB pin. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + - items: + - const: 1 + - const: 2 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - dovdd-supply + - avdd-supply + - dvdd-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@31 { + compatible = "galaxycore,gc08a3"; + reg = <0x31>; + + clocks = <&gc08a3_clk>; + + reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>; + + avdd-supply = <&gc08a3_avdd>; + dovdd-supply = <&gc08a3_dovdd>; + dvdd-supply = <&gc08a3_dvdd>; + + port { + sensor_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <336000000 207000000>; + remote-endpoint = <&seninf_csi_port_0_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml new file mode 100644 index 000000000000..3ace50e11921 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2024 Collabora Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/maxim,max96714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX96714 GMSL2 to CSI-2 Deserializer + +maintainers: + - Julien Massot <julien.massot@collabora.com> + +description: + The MAX96714 deserializer converts GMSL2 serial inputs into MIPI + CSI-2 D-PHY formatted output. The device allows the GMSL2 link to + simultaneously transmit bidirectional control-channel data while forward + video transmissions are in progress. The MAX96714 can connect to one + remotely located serializer using industry-standard coax or STP + interconnects. The device cans operate in pixel or tunnel mode. In pixel mode + the MAX96714 can select individual video stream, while the tunnel mode forward all + the MIPI data received by the serializer. + + The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the + forward direction and 187.5Mbps in the reverse direction. + MAX96714F only supports a fixed rate of 3Gbps in the forward direction. + +properties: + compatible: + oneOf: + - const: maxim,max96714f + - items: + - enum: + - maxim,max96714 + - const: maxim,max96714f + + reg: + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + description: + Specifier for the GPIO connected to the PWDNB pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: GMSL Input + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for GMSL2-Link port. + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + lane-polarities: + minItems: 1 + maxItems: 5 + + link-frequencies: + maxItems: 1 + + required: + - data-lanes + + required: + - port@1 + + i2c-gate: + $ref: /schemas/i2c/i2c-gate.yaml + unevaluatedProperties: false + description: + The MAX96714 will pass through and forward the I2C requests from the + incoming I2C bus over the GMSL2 link. Therefore it supports an i2c-gate + subnode to configure a serializer. + + port0-poc-supply: + description: Regulator providing Power over Coax for the GMSL port + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + deserializer@28 { + compatible = "maxim,max96714f"; + reg = <0x28>; + powerdown-gpios = <&main_gpio0 37 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + max96714_gmsl_in: endpoint { + remote-endpoint = <&max96917f_gmsl_out>; + }; + }; + + port@1 { + reg = <1>; + max96714_csi_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <400000000>; + remote-endpoint = <&csi_in>; + }; + }; + }; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + serializer@40 { + compatible = "maxim,max96717f"; + reg = <0x40>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + max96717f_csi_in: endpoint { + data-lanes = <1 2>; + lane-polarities = <1 0 1>; + remote-endpoint = <&sensor_out>; + }; + }; + + port@1 { + reg = <1>; + max96917f_gmsl_out: endpoint { + remote-endpoint = <&max96714_gmsl_in>; + }; + }; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml new file mode 100644 index 000000000000..d1e8ba6e368e --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2024 Collabora Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/maxim,max96717.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX96717 CSI-2 to GMSL2 Serializer + +maintainers: + - Julien Massot <julien.massot@collabora.com> + +description: + The MAX96717 serializer converts MIPI CSI-2 D-PHY formatted input + into GMSL2 serial outputs. The device allows the GMSL2 link to + simultaneously transmit bidirectional control-channel data while forward + video transmissions are in progress. The MAX96717 can connect to one + remotely located deserializer using industry-standard coax or STP + interconnects. The device cans operate in pixel or tunnel mode. In pixel mode + the MAX96717 can select the MIPI datatype, while the tunnel mode forward all the MIPI + data received by the serializer. + The MAX96717 supports Reference Over Reverse (channel), + to generate a clock output for the sensor from the GMSL reverse channel. + + The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the + forward direction and 187.5Mbps in the reverse direction. + MAX96717F only supports a fixed rate of 3Gbps in the forward direction. + +properties: + compatible: + oneOf: + - const: maxim,max96717f + - items: + - enum: + - maxim,max96717 + - const: maxim,max96717f + + '#gpio-cells': + const: 2 + description: + First cell is the GPIO pin number, second cell is the flags. The GPIO pin + number must be in range of [0, 10]. + + gpio-controller: true + + '#clock-cells': + const: 0 + + reg: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + lane-polarities: + minItems: 1 + maxItems: 5 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: GMSL Output port + + required: + - port@1 + + i2c-gate: + $ref: /schemas/i2c/i2c-gate.yaml + unevaluatedProperties: false + description: + The MAX96717 will forward the I2C requests from the + incoming GMSL2 link. Therefore, it supports an i2c-gate + subnode to configure a sensor. + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + serializer: serializer@40 { + compatible = "maxim,max96717f"; + reg = <0x40>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + max96717f_csi_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_out>; + }; + }; + + port@1 { + reg = <1>; + max96917f_gmsl_out: endpoint { + remote-endpoint = <&deser_gmsl_in>; + }; + }; + }; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + sensor@10 { + compatible = "st,st-vgxy61"; + reg = <0x10>; + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; + clocks = <&serializer>; + VCORE-supply = <&v1v2>; + VDDIO-supply = <&v1v8>; + VANA-supply = <&v2v8>; + port { + sensor_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96717f_csi_in>; + }; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml index 80d24220baa0..c978abc0cdb3 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx258.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/media/i2c/imx258.yaml# +$id: http://devicetree.org/schemas/media/i2c/sony,imx258.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sony IMX258 13 Mpixel CMOS Digital Image Sensor @@ -13,11 +13,16 @@ description: |- IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel type stacked image sensor with a square pixel array of size 4208 x 3120. It is programmable through I2C interface. Image data is sent through MIPI - CSI-2. + CSI-2. The sensor exists in two different models, a standard variant + (IMX258) and a variant with phase detection autofocus (IMX258-PDAF). + The camera module does not expose the model through registers, so the + exact model needs to be specified. properties: compatible: - const: sony,imx258 + enum: + - sony,imx258 + - sony,imx258-pdaf assigned-clocks: true assigned-clock-parents: true diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml new file mode 100644 index 000000000000..e4f49f1435a5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2024 Ideas on Board Oy +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX283 Sensor + +maintainers: + - Kieran Bingham <kieran.bingham@ideasonboard.com> + - Umang Jain <umang.jain@ideasonboard.com> + +description: + IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active + array size of 5472H x 3648V. It is programmable through I2C interface. The + I2C client address is fixed to 0x1a as per sensor data sheet. Image data is + sent through MIPI CSI-2. + +properties: + compatible: + const: sony,imx283 + + reg: + maxItems: 1 + + clocks: + description: Clock frequency from 6 to 24 MHz. + maxItems: 1 + + vadd-supply: + description: Analog power supply (2.9V) + + vdd1-supply: + description: Interface power supply (1.8V) + + vdd2-supply: + description: Digital power supply (1.2V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + anyOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx283"; + reg = <0x1a>; + clocks = <&imx283_clk>; + + assigned-clocks = <&imx283_clk>; + assigned-clock-parents = <&imx283_clk_parent>; + assigned-clock-rates = <12000000>; + + vadd-supply = <&camera_vadd_2v9>; + vdd1-supply = <&camera_vdd1_1v8>; + vdd2-supply = <&camera_vdd2_1v2>; + + port { + imx283: endpoint { + remote-endpoint = <&cam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml new file mode 100644 index 000000000000..085020cb9e61 --- /dev/null +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination E5010 JPEG Encoder + +maintainers: + - Devarsh Thakkar <devarsht@ti.com> + +description: | + The E5010 is a JPEG encoder from Imagination Technologies implemented on + TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422 + inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to + 8Kx8K resolution. + +properties: + compatible: + oneOf: + - items: + - const: ti,am62a-jpeg-enc + - const: img,e5010-jpeg-enc + - const: img,e5010-jpeg-enc + + reg: + items: + - description: The E5010 core register region + - description: The E5010 mmu register region + + reg-names: + items: + - const: core + - const: mmu + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + jpeg-encoder@fd20000 { + compatible = "img,e5010-jpeg-enc"; + reg = <0x00 0xfd20000 0x00 0x100>, + <0x00 0xfd20200 0x00 0x200>; + reg-names = "core", "mmu"; + clocks = <&k3_clks 201 0>; + power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml index 59db8306485b..18603f6c5e06 100644 --- a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml @@ -23,6 +23,7 @@ properties: oneOf: - enum: - mediatek,mt8183-mdp3-rdma + - mediatek,mt8188-mdp3-rdma - mediatek,mt8195-mdp3-rdma - mediatek,mt8195-vdo1-rdma - items: diff --git a/Documentation/devicetree/bindings/media/mediatek,mt7622-cir.yaml b/Documentation/devicetree/bindings/media/mediatek,mt7622-cir.yaml new file mode 100644 index 000000000000..c01210e053f9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt7622-cir.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Consumer Infrared Receiver on-SoC Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +allOf: + - $ref: rc.yaml# + +properties: + compatible: + enum: + - mediatek,mt7622-cir + - mediatek,mt7623-cir + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: clk + - const: bus + +required: + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ir@10013000 { + compatible = "mediatek,mt7623-cir"; + reg = <0x10013000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_IRRX>, <&topckgen CLK_TOP_AXI_SEL>; + clock-names = "clk", "bus"; + linux,rc-map-name = "rc-rc6-mce"; + }; diff --git a/Documentation/devicetree/bindings/media/mtk-cir.txt b/Documentation/devicetree/bindings/media/mtk-cir.txt deleted file mode 100644 index 5e18087ce11f..000000000000 --- a/Documentation/devicetree/bindings/media/mtk-cir.txt +++ /dev/null @@ -1,28 +0,0 @@ -Device-Tree bindings for Mediatek consumer IR controller -found in Mediatek SoC family - -Required properties: -- compatible : Should be - "mediatek,mt7623-cir": for MT7623 SoC - "mediatek,mt7622-cir": for MT7622 SoC -- clocks : list of clock specifiers, corresponding to - entries in clock-names property; -- clock-names : should contain - - "clk" entries: for MT7623 SoC - - "clk", "bus" entries: for MT7622 SoC -- interrupts : should contain IR IRQ number; -- reg : should contain IO map address for IR. - -Optional properties: -- linux,rc-map-name : see rc.txt file in the same directory. - -Example: - -cir: cir@10013000 { - compatible = "mediatek,mt7623-cir"; - reg = <0 0x10013000 0 0x1000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_IRRX>; - clock-names = "clk"; - linux,rc-map-name = "rc-rc6-mce"; -}; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml index 3a4d817e544e..56c16458e3bb 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml @@ -18,7 +18,9 @@ allOf: properties: compatible: - const: qcom,msm8996-venus + enum: + - qcom,msm8996-venus + - qcom,msm8998-venus power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml b/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml new file mode 100644 index 000000000000..1fc62a1d8eda --- /dev/null +++ b/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/raspberrypi,pispbe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raspberry Pi PiSP Image Signal Processor (ISP) Back End + +maintainers: + - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + +description: | + The Raspberry Pi PiSP Image Signal Processor (ISP) Back End is an image + processor that fetches images in Bayer or Grayscale format from DRAM memory + in tiles and produces images consumable by applications. + + The full ISP documentation is available at + https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf + +properties: + compatible: + items: + - enum: + - brcm,bcm2712-pispbe + - const: raspberrypi,pispbe + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + isp@880000 { + compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe"; + reg = <0x10 0x00880000 0x0 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&firmware_clocks 7>; + iommus = <&iommu2>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index 7bbe580c80f7..dedc5a4b81ec 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -103,6 +103,7 @@ properties: - rc-msi-digivox-iii - rc-msi-tvanywhere - rc-msi-tvanywhere-plus + - rc-mygica-utv3 - rc-nebula - rc-nec-terratec-cinergy-xs - rc-norwood diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml index 1e72b8808d24..bc1245127025 100644 --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml @@ -19,6 +19,7 @@ properties: compatible: items: - enum: + - renesas,r9a07g043-cru # RZ/G2UL - renesas,r9a07g044-cru # RZ/G2{L,LC} - renesas,r9a07g054-cru # RZ/V2L - const: renesas,rzg2l-cru @@ -87,10 +88,6 @@ properties: Input port node, describing the Image Processing module connected to the CSI-2 receiver. - required: - - port@0 - - port@1 - required: - compatible - reg @@ -102,6 +99,36 @@ required: - reset-names - power-domains +allOf: + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a07g044-cru + - renesas,r9a07g054-cru + then: + properties: + ports: + required: + - port@0 + - port@1 + + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a07g043-cru + then: + properties: + ports: + properties: + port@0: false + + required: + - port@1 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml index 67eea2ac1d22..7faa12fecd5b 100644 --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml @@ -19,6 +19,7 @@ properties: compatible: items: - enum: + - renesas,r9a07g043-csi2 # RZ/G2UL - renesas,r9a07g044-csi2 # RZ/G2{L,LC} - renesas,r9a07g054-csi2 # RZ/V2L - const: renesas,rzg2l-csi2 diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml index ea2342222408..ac17cda65191 100644 --- a/Documentation/devicetree/bindings/media/rockchip-rga.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml @@ -24,6 +24,7 @@ properties: - enum: - rockchip,rk3228-rga - rockchip,rk3568-rga + - rockchip,rk3588-rga - const: rockchip,rk3288-rga reg: diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml index 3be1db30bf41..d1c3421bee10 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: FSL/NXP Integrated Flash Controller maintainers: - - Li Yang <leoyang.li@nxp.com> + - Shawn Guo <shawnguo@kernel.org> description: | NXP's integrated flash controller (IFC) is an advanced version of the diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml index 71547eee9919..5447f1dddedf 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Multi Mode DDR controller (MMDC) maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml b/Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml new file mode 100644 index 000000000000..d6a71c912b76 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/marvell,88pm886-a1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell 88PM886 PMIC core + +maintainers: + - Karel Balej <balejk@matfyz.cz> + +description: + Marvell 88PM886 is a PMIC providing several functions such as onkey, + regulators or battery and charger. + +properties: + compatible: + const: marvell,88pm886-a1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: true + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo(1[0-6]|[1-9])|buck[1-5])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + description: LDO or buck regulator. + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@30 { + compatible = "marvell,88pm886-a1"; + reg = <0x30>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + wakeup-source; + + regulators { + ldo2: ldo2 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3300000>; + }; + + ldo15: ldo15 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + buck2: buck2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml index c8c4812fffe2..768390b92682 100644 --- a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml @@ -22,8 +22,10 @@ properties: - mediatek,mt8173-scpsys - mediatek,mt8183-scpsys - mediatek,mt8186-scpsys + - mediatek,mt8188-scpsys - mediatek,mt8192-scpsys - mediatek,mt8195-scpsys + - mediatek,mt8365-scpsys - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index 336c0495c8a3..b938fa26d2ce 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -17,13 +17,14 @@ A typical MFD can be: Optional properties: -- compatible : "simple-mfd" - this signifies that the operating system should - consider all subnodes of the MFD device as separate devices akin to how - "simple-bus" indicates when to see subnodes as children for a simple - memory-mapped bus. For more complex devices, when the nexus driver has to - probe registers to figure out what child devices exist etc, this should not - be used. In the latter case the child devices will be determined by the - operating system. +- compatible : "simple-mfd" - this signifies that the operating system + should consider all subnodes of the MFD device as separate and independent + devices, so not needing any resources to be provided by the parent device. + Similarly to how "simple-bus" indicates when to see subnodes as children for + a simple memory-mapped bus. + For more complex devices, when the nexus driver has to probe registers to + figure out what child devices exist etc, this should not be used. In the + latter case the child devices will be determined by the operating system. - ranges: Describes the address mapping relationship to the parent. Should set the child's base address to 0, the physical address within parent's address diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index 0c75d8bde568..0c6e1870db1d 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -19,110 +19,136 @@ properties: const: qcom,pm8008 reg: - description: - I2C slave address. - maxItems: 1 interrupts: maxItems: 1 - description: Parent interrupt. + reset-gpios: + maxItems: 1 + + vdd-l1-l2-supply: true + vdd-l3-l4-supply: true + vdd-l5-supply: true + vdd-l6-supply: true + vdd-l7-supply: true - "#interrupt-cells": + gpio-controller: true + + "#gpio-cells": const: 2 - description: | - The first cell is the IRQ number, the second cell is the IRQ trigger - flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. + gpio-ranges: + maxItems: 1 interrupt-controller: true - "#address-cells": - const: 1 + "#interrupt-cells": + const: 2 - "#size-cells": + "#thermal-sensor-cells": const: 0 -patternProperties: - "^gpio@[0-9a-f]+$": + pinctrl: type: object + additionalProperties: false + patternProperties: + "-state$": + type: object - description: | - The GPIO peripheral. This node may be specified twice, one for each GPIO. - - properties: - compatible: - items: - - const: qcom,pm8008-gpio - - const: qcom,spmi-gpio - - reg: - description: Peripheral address of one of the two GPIO peripherals. - maxItems: 1 - - gpio-controller: true - - gpio-ranges: - maxItems: 1 + allOf: + - $ref: /schemas/pinctrl/pinmux-node.yaml + - $ref: /schemas/pinctrl/pincfg-node.yaml - interrupt-controller: true + properties: + pins: + items: + pattern: "^gpio[12]$" - "#interrupt-cells": - const: 2 + function: + items: + - enum: + - normal - "#gpio-cells": - const: 2 + required: + - pins + - function - required: - - compatible - - reg - - gpio-controller - - interrupt-controller - - "#gpio-cells" - - gpio-ranges - - "#interrupt-cells" + additionalProperties: false + regulators: + type: object additionalProperties: false + patternProperties: + "^ldo[1-7]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible - reg - interrupts - - "#address-cells" - - "#size-cells" + - vdd-l1-l2-supply + - vdd-l3-l4-supply + - vdd-l5-supply + - vdd-l6-supply + - vdd-l7-supply + - gpio-controller + - "#gpio-cells" + - gpio-ranges + - interrupt-controller - "#interrupt-cells" + - "#thermal-sensor-cells" additionalProperties: false examples: - | - #include <dt-bindings/mfd/qcom-pm8008.h> + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; - pmic@8 { + pm8008: pmic@8 { compatible = "qcom,pm8008"; reg = <0x8>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <2>; interrupt-parent = <&tlmm>; interrupts = <32 IRQ_TYPE_EDGE_RISING>; - pm8008_gpios: gpio@c000 { - compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8008_gpios 0 0 2>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; + reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8b_1p2>; + vdd-l3-l4-supply = <&vreg_s1b_1p8>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_bob>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + pinctrl { + gpio-keys-state { + pins = "gpio1"; + function = "normal"; + }; + }; + + regulators { + ldo1 { + regulator-name = "vreg_l1"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index b7f01cbb8fff..a2b2fbf77d5c 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -75,6 +75,7 @@ properties: - qcom,pma8084 - qcom,pmc8180 - qcom,pmc8180c + - qcom,pmc8380 - qcom,pmd9635 - qcom,pmi632 - qcom,pmi8950 @@ -95,6 +96,7 @@ properties: - qcom,pmx65 - qcom,pmx75 - qcom,smb2351 + - qcom,smb2360 - const: qcom,spmi-pmic reg: diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml deleted file mode 100644 index 839c0521f1e5..000000000000 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml +++ /dev/null @@ -1,288 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: RK809 Power Management Integrated Circuit - -maintainers: - - Chris Zhong <zyw@rock-chips.com> - - Zhang Qing <zhangqing@rock-chips.com> - -description: | - Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD - that includes regulators, an RTC, and power button. - -properties: - compatible: - enum: - - rockchip,rk809 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - '#clock-cells': - description: | - See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. - minimum: 0 - maximum: 1 - - clock-output-names: - description: - From common clock binding to override the default output clock name. - - rockchip,system-power-controller: - type: boolean - deprecated: true - description: - Telling whether or not this PMIC is controlling the system power. - - system-power-controller: true - - wakeup-source: - type: boolean - description: - Device can be used as a wakeup source. - - vcc1-supply: - description: - The input supply for DCDC_REG1. - - vcc2-supply: - description: - The input supply for DCDC_REG2. - - vcc3-supply: - description: - The input supply for DCDC_REG3. - - vcc4-supply: - description: - The input supply for DCDC_REG4. - - vcc5-supply: - description: - The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. - - vcc6-supply: - description: - The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. - - vcc7-supply: - description: - The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. - - vcc8-supply: - description: - The input supply for SWITCH_REG1. - - vcc9-supply: - description: - The input supply for DCDC_REG5 and SWITCH_REG2. - - regulators: - type: object - patternProperties: - "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false - unevaluatedProperties: false - -allOf: - - if: - properties: - '#clock-cells': - const: 0 - - then: - properties: - clock-output-names: - maxItems: 1 - - else: - properties: - clock-output-names: - maxItems: 2 - -required: - - compatible - - reg - - interrupts - - "#clock-cells" - -additionalProperties: false - -examples: - - | - #include <dt-bindings/pinctrl/rockchip.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - interrupt-parent = <&gpio3>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l_pin>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sysin>; - vcc2-supply = <&vcc_sysin>; - vcc3-supply = <&vcc_sysin>; - vcc4-supply = <&vcc_sysin>; - vcc6-supply = <&vcc_sysin>; - vcc7-supply = <&vcc_sysin>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sysin>; - vcc10-supply = <&vcc_sysin>; - vcc11-supply = <&vcc_sysin>; - vcc12-supply = <&vcc3v3_sys>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: vcc_wl: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_pmupll: LDO_REG3 { - regulator-name = "vcc1v8_pmupll"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml index 8c2fd0fabb92..2cb6d176a84c 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -4,20 +4,21 @@ $id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: RK817 Power Management Integrated Circuit +title: RK809/RK817 Power Management Integrated Circuit maintainers: - Chris Zhong <zyw@rock-chips.com> - Zhang Qing <zhangqing@rock-chips.com> description: | - Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD - that includes regulators, an RTC, a power button, an audio codec, and a - battery charger manager. + Rockchip RK809/RK817 series PMIC. This device consists of an i2c controlled + MFD that includes regulators, an RTC, a power button and an audio codec. + The RK817 variant also provides a battery charger manager. properties: compatible: enum: + - rockchip,rk809 - rockchip,rk817 reg: @@ -32,6 +33,13 @@ properties: minimum: 0 maximum: 1 + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + clock-output-names: description: From common clock binding to override the default output clock name. @@ -42,6 +50,9 @@ properties: description: Telling whether or not this PMIC is controlling the system power. + '#sound-dai-cells': + const: 0 + system-power-controller: true wakeup-source: @@ -79,41 +90,22 @@ properties: vcc8-supply: description: - The input supply for BOOST. + The input supply for BOOST on RK817, or for SWITCH_REG2 on RK809. vcc9-supply: description: - The input supply for OTG_SWITCH. + The input supply for OTG_SWITCH on RK817, + or for DCDC_REG5 and SWITCH_REG1 on RK809. regulators: type: object patternProperties: - "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": - type: object + "^(LDO_REG[1-9]|DCDC_REG[1-5]|BOOST|OTG_SWITCH|SWITCH_REG[1-2])$": + $ref: /schemas/regulator/regulator.yaml unevaluatedProperties: false - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false - - clocks: - description: - The input clock for the audio codec. - - clock-names: - description: - The clock name for the codec clock. - items: - - const: mclk - - '#sound-dai-cells': - description: - Needed for the interpretation of sound dais. - const: 0 + additionalProperties: false codec: - description: | - The child node for the codec to hold additional properties. If no - additional properties are required for the codec, this node can be - omitted. type: object additionalProperties: false properties: @@ -123,9 +115,6 @@ properties: Describes if the microphone uses differential mode. charger: - description: | - The child node for the charger to hold additional properties. If a - battery is not in use, this node can be omitted. type: object $ref: /schemas/power/supply/power-supply.yaml @@ -168,6 +157,7 @@ properties: additionalProperties: false allOf: + - $ref: /schemas/sound/dai-common.yaml# - if: properties: '#clock-cells': @@ -183,6 +173,22 @@ allOf: clock-output-names: maxItems: 2 + - if: + properties: + compatible: + contains: + const: rockchip,rk817 + then: + properties: + regulators: + patternProperties: + "^(DCDC_REG5|SWITCH_REG[1-2])$": false + else: + properties: + regulators: + patternProperties: + "^(BOOST|OTG_SWITCH)$": false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml new file mode 100644 index 000000000000..d381125a0a15 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD96801 Scalable Power Management Integrated Circuit + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: + BD96801 is an automotive grade single-chip power management IC. + It integrates 4 buck converters and 3 LDOs with safety features like + over-/under voltage and over current detection and a watchdog. + +properties: + compatible: + const: rohm,bd96801 + + reg: + maxItems: 1 + + interrupts: + description: + The PMIC provides intb and errb IRQ lines. The errb IRQ line is used + for fatal IRQs which will cause the PMIC to shut down power outputs. + In many systems this will shut down the SoC contolling the PMIC and + connecting/handling the errb can be omitted. However, there are cases + where the SoC is not powered by the PMIC or has a short time backup + energy to handle shutdown of critical hardware. In that case it may be + useful to connect the errb and handle errb events. + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [intb, errb] + - const: errb + + rohm,hw-timeout-ms: + description: + Watchdog timeout value(s). First walue is timeout limit. Second value is + optional value for 'too early' watchdog ping if window timeout mode is + to be used. + minItems: 1 + maxItems: 2 + + rohm,wdg-action: + description: + Whether the watchdog failure must turn off the regulator power outputs or + just toggle the INTB line. + enum: + - prstb + - intb-only + + timeout-sec: + maxItems: 2 + + regulators: + $ref: /schemas/regulator/rohm,bd96801-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@60 { + reg = <0x60>; + compatible = "rohm,bd96801"; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "intb", "errb"; + + regulators { + buck1 { + regulator-name = "buck1"; + regulator-ramp-delay = <1250>; + /* 0.5V min INITIAL - 150 mV tune */ + regulator-min-microvolt = <350000>; + /* 3.3V + 150mV tune */ + regulator-max-microvolt = <3450000>; + + /* These can be set only when PMIC is in STBY */ + rohm,initial-voltage-microvolt = <500000>; + regulator-ov-error-microvolt = <230000>; + regulator-uv-error-microvolt = <230000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <0>; + }; + buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <350000>; + regulator-max-microvolt = <3450000>; + + rohm,initial-voltage-microvolt = <3000000>; + regulator-ov-error-microvolt = <18000>; + regulator-uv-error-microvolt = <18000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <1>; + }; + buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <350000>; + regulator-max-microvolt = <3450000>; + + rohm,initial-voltage-microvolt = <600000>; + regulator-ov-warn-microvolt = <18000>; + regulator-uv-warn-microvolt = <18000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-error-kelvin = <0>; + }; + buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <350000>; + regulator-max-microvolt = <3450000>; + + rohm,initial-voltage-microvolt = <600000>; + regulator-ov-warn-microvolt = <18000>; + regulator-uv-warn-microvolt = <18000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-error-kelvin = <0>; + }; + ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + + rohm,initial-voltage-microvolt = <500000>; + regulator-ov-error-microvolt = <36000>; + regulator-uv-error-microvolt = <34000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <0>; + }; + ldo6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + + rohm,initial-voltage-microvolt = <300000>; + regulator-ov-error-microvolt = <36000>; + regulator-uv-error-microvolt = <34000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <0>; + }; + ldo7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + + rohm,initial-voltage-microvolt = <500000>; + regulator-ov-error-microvolt = <36000>; + regulator-uv-error-microvolt = <34000>; + regulator-temp-protection-kelvin = <1>; + regulator-temp-warn-kelvin = <0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/syscon-common.yaml b/Documentation/devicetree/bindings/mfd/syscon-common.yaml new file mode 100644 index 000000000000..451cbad467a3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/syscon-common.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/syscon-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Controller Registers R/W Common Properties + +description: + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. The typical use-case is + for some other node's driver, or platform-specific code, to acquire + a reference to the syscon node (e.g. by phandle, node path, or + search using a specific compatible value), interrogate the node (or + associated OS driver) to determine the location of the registers, + and access the registers directly. + +maintainers: + - Lee Jones <lee@kernel.org> + +select: + properties: + compatible: + contains: + const: syscon + + required: + - compatible + +properties: + compatible: + contains: + const: syscon + minItems: 2 + maxItems: 5 # Should be enough + + reg: + maxItems: 1 + + reg-io-width: + description: + The size (in bytes) of the IO accesses that should be performed + on the device. + enum: [1, 2, 4, 8] + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: simple-mfd + then: + properties: + compatible: + minItems: 3 + maxItems: 5 + +additionalProperties: true + +examples: + - | + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", "syscon"; + reg = <0x01c00000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 7ed12a938baa..9dc594ea3654 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/syscon.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: System Controller Registers R/W +title: System Controller Devices description: | System controller node represents a register region containing a set @@ -19,121 +19,213 @@ description: | maintainers: - Lee Jones <lee@kernel.org> +# Need a select with all compatibles listed for compatibility with older +# dtschema (<2024.02), so this will not be selected for other schemas having +# syscon fallback. select: properties: compatible: contains: enum: - - syscon - + - al,alpine-sysfabric-servic + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - altr,l3regs + - altr,sdr-ctl + - amd,pensando-elba-syscon + - amlogic,meson-mx-assist + - amlogic,meson-mx-bootrom + - amlogic,meson8-analog-top + - amlogic,meson8b-analog-top + - amlogic,meson8-pmu + - amlogic,meson8b-pmu + - apm,merlin-poweroff-mailbox + - apm,mustang-poweroff-mailbox + - apm,xgene-csw + - apm,xgene-efuse + - apm,xgene-mcb + - apm,xgene-rb + - apm,xgene-scu + - atmel,sama5d2-sfrbu + - atmel,sama5d3-nfc-io + - atmel,sama5d3-sfrbu + - atmel,sama5d4-sfrbu + - axis,artpec6-syscon + - brcm,cru-clkset + - brcm,sr-cdru + - brcm,sr-mhb + - cirrus,ep7209-syscon1 + - cirrus,ep7209-syscon2 + - cirrus,ep7209-syscon3 + - cnxt,cx92755-uc + - freecom,fsg-cs2-system-controller + - fsl,imx93-aonmix-ns-syscfg + - fsl,imx93-wakeupmix-syscfg + - fsl,ls1088a-reset + - fsl,vf610-anatop + - fsl,vf610-mscm-cpucfg + - hisilicon,dsa-subctrl + - hisilicon,hi6220-sramctrl + - hisilicon,hip04-ppe + - hisilicon,pcie-sas-subctrl + - hisilicon,peri-subctrl + - hpe,gxp-sysreg + - loongson,ls1b-syscon + - loongson,ls1c-syscon + - lsi,axxia-syscon + - marvell,armada-3700-cpu-misc + - marvell,armada-3700-nb-pm + - marvell,armada-3700-avs + - marvell,armada-3700-usb2-host-misc + - marvell,dove-global-config + - mediatek,mt2701-pctl-a-syscfg + - mediatek,mt2712-pctl-a-syscfg + - mediatek,mt6397-pctl-pmic-syscfg + - mediatek,mt8135-pctl-a-syscfg + - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8173-pctl-a-syscfg + - mediatek,mt8365-syscfg + - microchip,lan966x-cpu-syscon + - microchip,sam9x60-sfr + - microchip,sama7g5-ddr3phy + - mscc,ocelot-cpu-syscon + - mstar,msc313-pmsleep + - nuvoton,ma35d1-sys + - nuvoton,wpcm450-shm + - rockchip,px30-qos + - rockchip,rk3036-qos + - rockchip,rk3066-qos + - rockchip,rk3128-qos + - rockchip,rk3228-qos + - rockchip,rk3288-qos + - rockchip,rk3368-qos + - rockchip,rk3399-qos + - rockchip,rk3568-qos + - rockchip,rk3588-qos + - rockchip,rv1126-qos + - st,spear1340-misc + - stericsson,nomadik-pmu + - starfive,jh7100-sysmain + - ti,am62-opp-efuse-table + - ti,am62-usb-phy-ctrl + - ti,am625-dss-oldi-io-ctrl + - ti,am62p-cpsw-mac-efuse + - ti,am654-dss-oldi-io-ctrl + - ti,j784s4-pcie-ctrl + - ti,keystone-pllctrl required: - compatible properties: compatible: - anyOf: - - items: - - enum: - - allwinner,sun8i-a83t-system-controller - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller - - altr,sdr-ctl - - amd,pensando-elba-syscon - - apm,xgene-csw - - apm,xgene-efuse - - apm,xgene-mcb - - apm,xgene-rb - - apm,xgene-scu - - brcm,cru-clkset - - brcm,sr-cdru - - brcm,sr-mhb - - freecom,fsg-cs2-system-controller - - fsl,imx93-aonmix-ns-syscfg - - fsl,imx93-wakeupmix-syscfg - - fsl,ls1088a-reset - - hisilicon,dsa-subctrl - - hisilicon,hi6220-sramctrl - - hisilicon,pcie-sas-subctrl - - hisilicon,peri-subctrl - - hpe,gxp-sysreg - - intel,lgm-syscon - - loongson,ls1b-syscon - - loongson,ls1c-syscon - - marvell,armada-3700-cpu-misc - - marvell,armada-3700-nb-pm - - marvell,armada-3700-avs - - marvell,armada-3700-usb2-host-misc - - mediatek,mt2712-pctl-a-syscfg - - mediatek,mt6397-pctl-pmic-syscfg - - mediatek,mt8135-pctl-a-syscfg - - mediatek,mt8135-pctl-b-syscfg - - mediatek,mt8173-pctl-a-syscfg - - mediatek,mt8365-syscfg - - microchip,lan966x-cpu-syscon - - microchip,sparx5-cpu-syscon - - mstar,msc313-pmsleep - - nuvoton,ma35d1-sys - - nuvoton,wpcm450-shm - - rockchip,px30-qos - - rockchip,rk3036-qos - - rockchip,rk3066-qos - - rockchip,rk3128-qos - - rockchip,rk3228-qos - - rockchip,rk3288-qos - - rockchip,rk3368-qos - - rockchip,rk3399-qos - - rockchip,rk3568-qos - - rockchip,rk3588-qos - - rockchip,rv1126-qos - - starfive,jh7100-sysmain - - ti,am62-usb-phy-ctrl - - ti,am62p-cpsw-mac-efuse - - ti,am654-dss-oldi-io-ctrl - - ti,am654-serdes-ctrl - - ti,j784s4-pcie-ctrl - - - const: syscon - - - contains: - const: syscon - minItems: 2 - maxItems: 5 # Should be enough + items: + - enum: + - al,alpine-sysfabric-service + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - altr,l3regs + - altr,sdr-ctl + - amd,pensando-elba-syscon + - amlogic,meson-mx-assist + - amlogic,meson-mx-bootrom + - amlogic,meson8-analog-top + - amlogic,meson8b-analog-top + - amlogic,meson8-pmu + - amlogic,meson8b-pmu + - apm,merlin-poweroff-mailbox + - apm,mustang-poweroff-mailbox + - apm,xgene-csw + - apm,xgene-efuse + - apm,xgene-mcb + - apm,xgene-rb + - apm,xgene-scu + - atmel,sama5d2-sfrbu + - atmel,sama5d3-nfc-io + - atmel,sama5d3-sfrbu + - atmel,sama5d4-sfrbu + - axis,artpec6-syscon + - brcm,cru-clkset + - brcm,sr-cdru + - brcm,sr-mhb + - cirrus,ep7209-syscon1 + - cirrus,ep7209-syscon2 + - cirrus,ep7209-syscon3 + - cnxt,cx92755-uc + - freecom,fsg-cs2-system-controller + - fsl,imx93-aonmix-ns-syscfg + - fsl,imx93-wakeupmix-syscfg + - fsl,ls1088a-reset + - fsl,vf610-anatop + - fsl,vf610-mscm-cpucfg + - hisilicon,dsa-subctrl + - hisilicon,hi6220-sramctrl + - hisilicon,hip04-ppe + - hisilicon,pcie-sas-subctrl + - hisilicon,peri-subctrl + - hpe,gxp-sysreg + - loongson,ls1b-syscon + - loongson,ls1c-syscon + - lsi,axxia-syscon + - marvell,armada-3700-cpu-misc + - marvell,armada-3700-nb-pm + - marvell,armada-3700-avs + - marvell,armada-3700-usb2-host-misc + - marvell,dove-global-config + - mediatek,mt2701-pctl-a-syscfg + - mediatek,mt2712-pctl-a-syscfg + - mediatek,mt6397-pctl-pmic-syscfg + - mediatek,mt8135-pctl-a-syscfg + - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8173-pctl-a-syscfg + - mediatek,mt8365-syscfg + - microchip,lan966x-cpu-syscon + - microchip,sam9x60-sfr + - microchip,sama7g5-ddr3phy + - mscc,ocelot-cpu-syscon + - mstar,msc313-pmsleep + - nuvoton,ma35d1-sys + - nuvoton,wpcm450-shm + - rockchip,px30-qos + - rockchip,rk3036-qos + - rockchip,rk3066-qos + - rockchip,rk3128-qos + - rockchip,rk3228-qos + - rockchip,rk3288-qos + - rockchip,rk3368-qos + - rockchip,rk3399-qos + - rockchip,rk3568-qos + - rockchip,rk3588-qos + - rockchip,rv1126-qos + - st,spear1340-misc + - stericsson,nomadik-pmu + - starfive,jh7100-sysmain + - ti,am62-opp-efuse-table + - ti,am62-usb-phy-ctrl + - ti,am625-dss-oldi-io-ctrl + - ti,am62p-cpsw-mac-efuse + - ti,am654-dss-oldi-io-ctrl + - ti,j784s4-pcie-ctrl + - ti,keystone-pllctrl + - const: syscon reg: maxItems: 1 - reg-io-width: - description: | - The size (in bytes) of the IO accesses that should be performed - on the device. - enum: [1, 2, 4, 8] - resets: maxItems: 1 - hwlocks: - maxItems: 1 - description: - Reference to a phandle of a hardware spinlock provider node. - required: - compatible - reg allOf: - - if: - properties: - compatible: - contains: - const: simple-mfd - then: - properties: - compatible: - minItems: 3 - maxItems: 5 + - $ref: syscon-common.yaml# -additionalProperties: true +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml index c2357fecb56c..e94b0fd7af0f 100644 --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -22,6 +22,32 @@ allOf: contains: const: ti,twl4030 then: + patternProperties: + "^regulator-": + properties: + compatible: + enum: + - ti,twl4030-vaux1 + - ti,twl4030-vaux2 + - ti,twl4030-vaux3 + - ti,twl4030-vaux4 + - ti,twl4030-vmmc1 + - ti,twl4030-vmmc2 + - ti,twl4030-vpll1 + - ti,twl4030-vpll2 + - ti,twl4030-vsim + - ti,twl4030-vdac + - ti,twl4030-vintana2 + - ti,twl4030-vio + - ti,twl4030-vdd1 + - ti,twl4030-vdd2 + - ti,twl4030-vintana1 + - ti,twl4030-vintdig + - ti,twl4030-vusb1v5 + - ti,twl4030-vusb1v8 + - ti,twl4030-vusb3v1 + ti,retain-on-reset: false + properties: madc: type: object @@ -50,13 +76,34 @@ allOf: properties: compatible: const: ti,twl4030-wdt - - if: properties: compatible: contains: const: ti,twl6030 then: + patternProperties: + "^regulator-": + properties: + compatible: + enum: + - ti,twl6030-vaux1 + - ti,twl6030-vaux2 + - ti,twl6030-vaux3 + - ti,twl6030-vmmc + - ti,twl6030-vpp + - ti,twl6030-vusim + - ti,twl6030-vana + - ti,twl6030-vcxio + - ti,twl6030-vdac + - ti,twl6030-vusb + - ti,twl6030-v1v8 + - ti,twl6030-v2v1 + - ti,twl6030-vdd1 + - ti,twl6030-vdd2 + - ti,twl6030-vdd3 + regulator-initial-mode: false + properties: gpadc: type: object @@ -69,6 +116,25 @@ allOf: contains: const: ti,twl6032 then: + patternProperties: + "^regulator-": + properties: + compatible: + enum: + - ti,twl6032-ldo1 + - ti,twl6032-ldo2 + - ti,twl6032-ldo3 + - ti,twl6032-ldo4 + - ti,twl6032-ldo5 + - ti,twl6032-ldo6 + - ti,twl6032-ldo7 + - ti,twl6032-ldoln + - ti,twl6032-ldousb + - ti,twl6032-smps3 + - ti,twl6032-smps4 + - ti,twl6032-vio + regulator-initial-mode: false + properties: gpadc: type: object @@ -112,6 +178,27 @@ properties: interrupts: maxItems: 1 +patternProperties: + "^regulator-": + type: object + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml + properties: + compatible: true + regulator-initial-mode: + enum: + - 0x08 # Sleep mode, the nominal output voltage is maintained + # with low power consumption with low load current capability + - 0x0e # Active mode, the regulator can deliver its nominal output + # voltage with full-load current capability + ti,retain-on-reset: + description: + Does not turn off the supplies during warm + reset. Could be needed for VMMC, as TWL6030 + reset sequence for this signal does not comply + with the SD specification. + type: boolean + unevaluatedProperties: false required: @@ -131,9 +218,85 @@ examples: compatible = "ti,twl6030"; reg = <0x48>; interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&gic>; + + gpadc { + compatible = "ti,twl6030-gpadc"; + interrupts = <6>; + #io-channel-cells = <1>; + }; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <8>; + }; + + regulator-vaux1 { + compatible = "ti,twl6030-vaux1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + regulator-vmmc1 { + compatible = "ti,twl6030-vmmc"; + ti,retain-on-reset; + }; }; }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "ti,twl4030"; + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + bci { + compatible = "ti,twl4030-bci"; + interrupts = <9>, <2>; + bci3v1-supply = <&vusb3v1>; + io-channels = <&twl_madc 11>; + io-channel-names = "vac"; + }; + + twl_madc: madc { + compatible = "ti,twl4030-madc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; + + pwrbutton { + compatible = "ti,twl4030-pwrbutton"; + interrupts = <8>; + }; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + + regulator-vaux1 { + compatible = "ti,twl4030-vaux1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0xe>; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + + watchdog { + compatible = "ti,twl4030-wdt"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.yaml b/Documentation/devicetree/bindings/mips/brcm/soc.yaml index 975945ca2888..0cc634482a6a 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.yaml +++ b/Documentation/devicetree/bindings/mips/brcm/soc.yaml @@ -55,6 +55,16 @@ properties: under the "cpus" node. $ref: /schemas/types.yaml#/definitions/uint32 + brcm,bmips-cbr-reg: + description: Reference address of the CBR. + Some SoC suffer from a BUG where CBR(Core Base Register) + address might be badly or never initialized by the Bootloader + or reading it from co-processor registers, if the system boots + from secondary CPU, results in invalid address. + The CBR address is always the same on the SoC hence it + can be provided in DT to handle these broken case. + $ref: /schemas/types.yaml#/definitions/uint32 + patternProperties: "^cpu@[0-9]$": type: object @@ -64,6 +74,20 @@ properties: required: - mips-hpt-frequency +if: + properties: + compatible: + contains: + enum: + - brcm,bcm6358 + - brcm,bcm6368 + +then: + properties: + cpus: + required: + - brcm,bmips-cbr-reg + additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/mips/mobileye.yaml b/Documentation/devicetree/bindings/mips/mobileye.yaml index 831975f6b479..d60744550e46 100644 --- a/Documentation/devicetree/bindings/mips/mobileye.yaml +++ b/Documentation/devicetree/bindings/mips/mobileye.yaml @@ -26,6 +26,11 @@ properties: - enum: - mobileye,eyeq5-epm5 - const: mobileye,eyeq5 + - description: Boards with Mobileye EyeQ6H SoC + items: + - enum: + - mobileye,eyeq6h-epm6 + - const: mobileye,eyeq6h additionalProperties: true diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt index cc916eaeed0a..e74165696b76 100644 --- a/Documentation/devicetree/bindings/mips/mscc.txt +++ b/Documentation/devicetree/bindings/mips/mscc.txt @@ -25,23 +25,6 @@ Example: reg = <0x71070000 0x1c>; }; - -o CPU system control: - -The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of -the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU -endianness, CPU bus control, CPU status. - -Required properties: -- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon" -- reg : Should contain registers location and length - -Example: - syscon@70000000 { - compatible = "mscc,ocelot-cpu-syscon", "syscon"; - reg = <0x70000000 0x2c>; - }; - o HSIO regs: The SoC has a few registers (HSIO) handling miscellaneous functionalities: diff --git a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml index f8ac309d2994..d337655bfbf8 100644 --- a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml +++ b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml @@ -20,5 +20,9 @@ properties: - enum: - cisco,sg220-26 - const: realtek,rtl8382-soc + - items: + - enum: + - cameo,rtl9302c-2x-rtl8224-2xge + - const: realtek,rtl9302-soc additionalProperties: true diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt deleted file mode 100644 index 7b486d4985dc..000000000000 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt +++ /dev/null @@ -1,196 +0,0 @@ -* Freescale Management Complex - -The Freescale Management Complex (fsl-mc) is a hardware resource -manager that manages specialized hardware objects used in -network-oriented packet processing applications. After the fsl-mc -block is enabled, pools of hardware resources are available, such as -queues, buffer pools, I/O interfaces. These resources are building -blocks that can be used to create functional hardware objects/devices -such as network interfaces, crypto accelerator instances, L2 switches, -etc. - -For an overview of the DPAA2 architecture and fsl-mc bus see: -Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst - -As described in the above overview, all DPAA2 objects in a DPRC share the -same hardware "isolation context" and a 10-bit value called an ICID -(isolation context id) is expressed by the hardware to identify -the requester. - -The generic 'iommus' property is insufficient to describe the relationship -between ICIDs and IOMMUs, so an iommu-map property is used to define -the set of possible ICIDs under a root DPRC and how they map to -an IOMMU. - -For generic IOMMU bindings, see -Documentation/devicetree/bindings/iommu/iommu.txt. - -For arm-smmu binding, see: -Documentation/devicetree/bindings/iommu/arm,smmu.yaml. - -The MSI writes are accompanied by sideband data which is derived from the ICID. -The msi-map property is used to associate the devices with both the ITS -controller and the sideband data which accompanies the writes. - -For generic MSI bindings, see -Documentation/devicetree/bindings/interrupt-controller/msi.txt. - -For GICv3 and GIC ITS bindings, see: -Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml. - -Required properties: - - - compatible - Value type: <string> - Definition: Must be "fsl,qoriq-mc". A Freescale Management Complex - compatible with this binding must have Block Revision - Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in - the MC control register region. - - - reg - Value type: <prop-encoded-array> - Definition: A standard property. Specifies one or two regions - defining the MC's registers: - - -the first region is the command portal for the - this machine and must always be present - - -the second region is the MC control registers. This - region may not be present in some scenarios, such - as in the device tree presented to a virtual machine. - - - ranges - Value type: <prop-encoded-array> - Definition: A standard property. Defines the mapping between the child - MC address space and the parent system address space. - - The MC address space is defined by 3 components: - <region type> <offset hi> <offset lo> - - Valid values for region type are - 0x0 - MC portals - 0x1 - QBMAN portals - - - #address-cells - Value type: <u32> - Definition: Must be 3. (see definition in 'ranges' property) - - - #size-cells - Value type: <u32> - Definition: Must be 1. - -Sub-nodes: - - The fsl-mc node may optionally have dpmac sub-nodes that describe - the relationship between the Ethernet MACs which belong to the MC - and the Ethernet PHYs on the system board. - - The dpmac nodes must be under a node named "dpmacs" which contains - the following properties: - - - #address-cells - Value type: <u32> - Definition: Must be present if dpmac sub-nodes are defined and must - have a value of 1. - - - #size-cells - Value type: <u32> - Definition: Must be present if dpmac sub-nodes are defined and must - have a value of 0. - - These nodes must have the following properties: - - - compatible - Value type: <string> - Definition: Must be "fsl,qoriq-mc-dpmac". - - - reg - Value type: <prop-encoded-array> - Definition: Specifies the id of the dpmac. - - - phy-handle - Value type: <phandle> - Definition: Specifies the phandle to the PHY device node associated - with the this dpmac. -Optional properties: - -- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier - data. - - The property is an arbitrary number of tuples of - (icid-base,iommu,iommu-base,length). - - Any ICID i in the interval [icid-base, icid-base + length) is - associated with the listed IOMMU, with the iommu-specifier - (i - icid-base + iommu-base). - -- msi-map: Maps an ICID to a GIC ITS and associated msi-specifier - data. - - The property is an arbitrary number of tuples of - (icid-base,gic-its,msi-base,length). - - Any ICID in the interval [icid-base, icid-base + length) is - associated with the listed GIC ITS, with the msi-specifier - (i - icid-base + msi-base). - -Deprecated properties: - - - msi-parent - Value type: <phandle> - Definition: Describes the MSI controller node handling message - interrupts for the MC. When there is no translation - between the ICID and deviceID this property can be used - to describe the MSI controller used by the devices on the - mc-bus. - The use of this property for mc-bus is deprecated. Please - use msi-map. - -Example: - - smmu: iommu@5000000 { - compatible = "arm,mmu-500"; - #iommu-cells = <1>; - stream-match-mask = <0x7C00>; - ... - }; - - gic: interrupt-controller@6000000 { - compatible = "arm,gic-v3"; - ... - } - its: gic-its@6020000 { - compatible = "arm,gic-v3-its"; - msi-controller; - ... - }; - - fsl_mc: fsl-mc@80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - /* define map for ICIDs 23-64 */ - iommu-map = <23 &smmu 23 41>; - /* define msi map for ICIDs 23-64 */ - msi-map = <23 &its 23 41>; - #address-cells = <3>; - #size-cells = <1>; - - /* - * Region type 0x0 - MC portals - * Region type 0x1 - QBMAN portals - */ - ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 - 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; - - dpmacs { - #address-cells = <1>; - #size-cells = <0>; - - dpmac@1 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <1>; - phy-handle = <&mdio0_phy0>; - } - } - }; diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml new file mode 100644 index 000000000000..01b00d89a992 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Management Complex + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + The Freescale Management Complex (fsl-mc) is a hardware resource + manager that manages specialized hardware objects used in + network-oriented packet processing applications. After the fsl-mc + block is enabled, pools of hardware resources are available, such as + queues, buffer pools, I/O interfaces. These resources are building + blocks that can be used to create functional hardware objects/devices + such as network interfaces, crypto accelerator instances, L2 switches, + etc. + + For an overview of the DPAA2 architecture and fsl-mc bus see: + Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst + + As described in the above overview, all DPAA2 objects in a DPRC share the + same hardware "isolation context" and a 10-bit value called an ICID + (isolation context id) is expressed by the hardware to identify + the requester. + + The generic 'iommus' property is insufficient to describe the relationship + between ICIDs and IOMMUs, so an iommu-map property is used to define + the set of possible ICIDs under a root DPRC and how they map to + an IOMMU. + + For generic IOMMU bindings, see + Documentation/devicetree/bindings/iommu/iommu.txt. + + For arm-smmu binding, see: + Documentation/devicetree/bindings/iommu/arm,smmu.yaml. + + The MSI writes are accompanied by sideband data which is derived from the ICID. + The msi-map property is used to associate the devices with both the ITS + controller and the sideband data which accompanies the writes. + + For generic MSI bindings, see + Documentation/devicetree/bindings/interrupt-controller/msi.txt. + + For GICv3 and GIC ITS bindings, see: + Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml. + +properties: + compatible: + enum: + - fsl,qoriq-mc + description: + Must be "fsl,qoriq-mc". A Freescale Management Complex + compatible with this binding must have Block Revision + Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in + the MC control register region. + + reg: + items: + - description: + the first region is the command portal for the + this machine and must always be present + + - description: + the second region is the MC control registers. This + region may not be present in some scenarios, such + as in the device tree presented to a virtual machine. + + ranges: + description: | + A standard property. Defines the mapping between the child + MC address space and the parent system address space. + + The MC address space is defined by 3 components: + <region type> <offset hi> <offset lo> + + Valid values for region type are + 0x0 - MC portals + 0x1 - QBMAN portals + + "#address-cells": + const: 3 + + "#size-cells": + const: 1 + + iommu-map: + description: | + Maps an ICID to an IOMMU and associated iommu-specifier + data. + + The property is an arbitrary number of tuples of + (icid-base,iommu,iommu-base,length). + + Any ICID i in the interval [icid-base, icid-base + length) is + associated with the listed IOMMU, with the iommu-specifier + (i - icid-base + iommu-base). + + msi-map: + description: | + Maps an ICID to a GIC ITS and associated msi-specifier + data. + + The property is an arbitrary number of tuples of + (icid-base,gic-its,msi-base,length). + + Any ICID in the interval [icid-base, icid-base + length) is + associated with the listed GIC ITS, with the msi-specifier + (i - icid-base + msi-base). + + msi-parent: + deprecated: true + $ref: /schemas/types.yaml#/definitions/phandle + description: + Describes the MSI controller node handling message + interrupts for the MC. When there is no translation + between the ICID and deviceID this property can be used + to describe the MSI controller used by the devices on the + mc-bus. + The use of this property for mc-bus is deprecated. Please + use msi-map. + + dma-coherent: true + + dpmacs: + type: object + description: + The fsl-mc node may optionally have dpmac sub-nodes that describe + the relationship between the Ethernet MACs which belong to the MC + and the Ethernet PHYs on the system board. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + '^ethernet@[a-f0-9]+$': + $ref: /schemas/net/fsl,qoriq-mc-dpmac.yaml + + additionalProperties: false + +required: + - compatible + - reg + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x0c000000 0x40>, /* MC portal base */ + <0x08340000 0x40000>; /* MC control reg */ + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x8 0x18000000 0x8000000>; + + /* define map for ICIDs 23-64 */ + iommu-map = <23 &smmu 23 41>; + /* define msi map for ICIDs 23-64 */ + msi-map = <23 &its 23 41>; + #address-cells = <3>; + #size-cells = <1>; + + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + phy-handle = <&mdio0_phy0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml index 1aebeb696ee0..e12d80be00cd 100644 --- a/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml +++ b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml @@ -29,6 +29,9 @@ properties: Defaults to 10 if unset. default: 10 + interrupts: + maxItems: 1 + timeout-sec: description: | The stall detector expiration timeout measured in seconds. @@ -43,9 +46,12 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + vmwdt@9030000 { compatible = "qemu,vcpu-stall-detector"; reg = <0x9030000 0x10000>; clock-frequency = <10>; timeout-sec = <8>; + interrupts = <GIC_PPI 15 IRQ_TYPE_EDGE_RISING>; }; diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml index bc403ae9e5d9..57646575a13f 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml @@ -51,6 +51,9 @@ properties: set when controller's internal DMA engine cannot access the DRAM memory, like on the G12A dedicated SDIO controller. + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml index cbd3d6c6c77f..eee6be7a7867 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml @@ -20,6 +20,7 @@ properties: - const: brcm,sdhci-brcmstb - items: - enum: + - brcm,bcm2712-sdhci - brcm,bcm74165b0-sdhci - brcm,bcm7445-sdhci - brcm,bcm7425-sdhci diff --git a/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml new file mode 100644 index 000000000000..b86ffb53b18b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Enhanced Secure Digital Host Controller (eSDHC) + +description: + The Enhanced Secure Digital Host Controller provides an interface + for MMC, SD, and SDIO types of memory cards. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + items: + - enum: + - fsl,mpc8536-esdhc + - fsl,mpc8378-esdhc + - fsl,p2020-esdhc + - fsl,p4080-esdhc + - fsl,t1040-esdhc + - fsl,t4240-esdhc + - fsl,ls1012a-esdhc + - fsl,ls1028a-esdhc + - fsl,ls1088a-esdhc + - fsl,ls1043a-esdhc + - fsl,ls1046a-esdhc + - fsl,ls2080a-esdhc + - const: fsl,esdhc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: specifies eSDHC base clock frequency. + + sdhci,wp-inverted: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true + description: + specifies that eSDHC controller reports + inverted write-protect state; New devices should use the generic + "wp-inverted" property. + + sdhci,1-bit-only: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true + description: + specifies that a controller can only handle + 1-bit data transfers. New devices should use the generic + "bus-width = <1>" property. + + sdhci,auto-cmd12: + $ref: /schemas/types.yaml#/definitions/flag + description: + specifies that a controller can only handle auto CMD12. + + voltage-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: specifies minimum slot voltage (mV). + - description: specifies maximum slot voltage (mV). + minItems: 1 + maxItems: 8 + + dma-coherent: true + + little-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + If the host controller is little-endian mode, specify + this property. The default endian mode is big-endian. + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: sdhci-common.yaml# + +unevaluatedProperties: false + +examples: + - | + mmc@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <100000000>; + voltage-ranges = <3300 3300>; + }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt deleted file mode 100644 index edb8cadb9541..000000000000 --- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Freescale Enhanced Secure Digital Host Controller (eSDHC) - -The Enhanced Secure Digital Host Controller provides an interface -for MMC, SD, and SDIO types of memory cards. - -This file documents differences between the core properties described -by mmc.txt and the properties used by the sdhci-esdhc driver. - -Required properties: - - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc". - Possible compatibles for PowerPC: - "fsl,mpc8536-esdhc" - "fsl,mpc8378-esdhc" - "fsl,p2020-esdhc" - "fsl,p4080-esdhc" - "fsl,t1040-esdhc" - "fsl,t4240-esdhc" - Possible compatibles for ARM: - "fsl,ls1012a-esdhc" - "fsl,ls1028a-esdhc" - "fsl,ls1088a-esdhc" - "fsl,ls1043a-esdhc" - "fsl,ls1046a-esdhc" - "fsl,ls2080a-esdhc" - - clock-frequency : specifies eSDHC base clock frequency. - -Optional properties: - - sdhci,wp-inverted : specifies that eSDHC controller reports - inverted write-protect state; New devices should use the generic - "wp-inverted" property. - - sdhci,1-bit-only : specifies that a controller can only handle - 1-bit data transfers. New devices should use the generic - "bus-width = <1>" property. - - sdhci,auto-cmd12: specifies that a controller can only handle auto - CMD12. - - voltage-ranges : two cells are required, first cell specifies minimum - slot voltage (mV), second cell specifies maximum slot voltage (mV). - Several ranges could be specified. - - little-endian : If the host controller is little-endian mode, specify - this property. The default endian mode is big-endian. - -Example: - -sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - voltage-ranges = <3300 3300>; -}; diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml index 36acc40c7d18..6e2cdac6a85d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml @@ -27,17 +27,19 @@ properties: maxItems: 1 voltage-ranges: - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-matrix description: | Two cells are required, first cell specifies minimum slot voltage (mV), second cell specifies maximum slot voltage (mV). items: - - description: | - value for minimum slot voltage in mV - default: 3200 - - description: | - value for maximum slot voltage in mV - default: 3400 + items: + - description: | + value for minimum slot voltage in mV + default: 3200 + - description: | + value for maximum slot voltage in mV + default: 3400 + maxItems: 1 gpios: description: | diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index c24c537f62b1..11979b026d21 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -51,6 +51,7 @@ properties: - qcom,sdm845-sdhci - qcom,sdx55-sdhci - qcom,sdx65-sdhci + - qcom,sdx75-sdhci - qcom,sm6115-sdhci - qcom,sm6125-sdhci - qcom,sm6350-sdhci diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt deleted file mode 100644 index eb7eb1b529f0..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Spreadtrum SDHCI controller (sdhci-sprd) - -The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface -for MMC, SD and SDIO types of cards. - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci-sprd driver. - -Required properties: -- compatible: Should contain "sprd,sdhci-r11". -- reg: physical base address of the controller and length. -- interrupts: Interrupts used by the SDHCI controller. -- clocks: Should contain phandle for the clock feeding the SDHCI controller -- clock-names: Should contain the following: - "sdio" - SDIO source clock (required) - "enable" - gate clock which used for enabling/disabling the device (required) - "2x_enable" - gate clock controlling the device for some special platforms (optional) - -Optional properties: -- assigned-clocks: the same with "sdio" clock -- assigned-clock-parents: the default parent of "sdio" clock -- pinctrl-names: should be "default", "state_uhs" -- pinctrl-0: should contain default/high speed pin control -- pinctrl-1: should contain uhs mode pin control - -PHY DLL delays are used to delay the data valid window, and align the window -to sampling clock. PHY DLL delays can be configured by following properties, -and each property contains 4 cells which are used to configure the clock data -write line delay value, clock read command line delay value, clock read data -positive edge delay value and clock read data negative edge delay value. -Each cell's delay value unit is cycle of the PHY clock. - -- sprd,phy-delay-legacy: Delay value for legacy timing. -- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing. -- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing. -- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing. -- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing. -- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing. -- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing. -- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing. -- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing. - -Examples: - -sdio0: sdio@20600000 { - compatible = "sprd,sdhci-r11"; - reg = <0 0x20600000 0 0x1000>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - - clock-names = "sdio", "enable"; - clocks = <&ap_clk CLK_EMMC_2X>, - <&apahb_gate CLK_EMMC_EB>; - assigned-clocks = <&ap_clk CLK_EMMC_2X>; - assigned-clock-parents = <&rpll CLK_RPLL_390M>; - - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&sd0_pins_default>; - pinctrl-1 = <&sd0_pins_uhs>; - - sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>; - bus-width = <8>; - non-removable; - no-sdio; - no-sd; - cap-mmc-hw-reset; - status = "okay"; -}; diff --git a/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml b/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml new file mode 100644 index 000000000000..b08081bc018b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/sprd,sdhci-r11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SDHCI controller + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + const: sprd,sdhci-r11 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: SDIO source clock + - description: gate clock for enabling/disabling the device + - description: gate clock controlling the device for some special platforms (optional) + + clock-names: + minItems: 2 + items: + - const: sdio + - const: enable + - const: 2x_enable + + pinctrl-0: + description: default/high speed pin control + maxItems: 1 + + pinctrl-1: + description: UHS mode pin control + maxItems: 1 + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: state_uhs + +patternProperties: + "^sprd,phy-delay-(legacy|mmc-(ddr52|highspeed|hs[24]00|hs400es)|sd-(highspeed|uhs-sdr(50|104)))$": + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: clock data write line delay value + - description: clock read command line delay value + - description: clock read data positive edge delay value + - description: clock read data negative edge delay value + description: + PHY DLL delays are used to delay the data valid window, and align + the window to the sampling clock. Each cell's delay value unit is + cycle of the PHY clock. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - $ref: sdhci-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/sprd,sc9860-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mmc@50430000 { + compatible = "sprd,sdhci-r11"; + reg = <0x50430000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&aon_prediv CLK_EMMC_2X>, + <&apahb_gate CLK_EMMC_EB>, + <&aon_gate CLK_EMMC_2X_EN>; + clock-names = "sdio", "enable", "2x_enable"; + + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + bus-width = <8>; + cap-mmc-hw-reset; + mmc-hs400-enhanced-strobe; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + non-removable; + no-sdio; + no-sd; + + sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>; + sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>; + sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>; + sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>; + }; +... diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml index 57b6957c8415..284f0f882c32 100644 --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml @@ -64,11 +64,29 @@ patternProperties: items: maximum: 0 + amlogic,boot-pages: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of pages starting from offset 0, where a special ECC + configuration must be used because it is accessed by the ROM + code. This ECC configuration uses 384 bytes data blocks. + Also scrambling mode is enabled for such pages. + + amlogic,boot-page-step: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Interval between pages, accessed by the ROM code. For example + we have 8 pages [0, 7]. Pages 0,2,4,6 are accessed by the + ROM code, so this field will be 2 (e.g. every 2nd page). Rest + of pages - 1,3,5,7 are read/written without this mode. + unevaluatedProperties: false dependencies: nand-ecc-strength: [nand-ecc-step-size] nand-ecc-step-size: [nand-ecc-strength] + amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"] + amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"] required: diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index 4598930851d9..e36c35b17873 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -60,15 +60,6 @@ Required properties: - reg: should contain 2 register ranges. The first one is pointing to the PMECC block, and the second one to the PMECC_ERRLOC block. -* SAMA5 NFC I/O bindings: - -SAMA5 SoCs embed an advanced NAND controller logic to automate READ/WRITE page -operations. This interface to this logic is placed in a separate I/O range and -should thus have its own DT node. - -- compatible: should be "atmel,sama5d3-nfc-io", "syscon". -- reg: should contain the I/O range used to interact with the NFC logic. - Example: nfc_io: nfc-io@70000000 { diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml index 021c0da0b072..f9eb1868ca1f 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml @@ -24,6 +24,7 @@ properties: - fsl,imx6q-gpmi-nand - fsl,imx6sx-gpmi-nand - fsl,imx7d-gpmi-nand + - fsl,imx8qxp-gpmi-nand - items: - enum: - fsl,imx8mm-gpmi-nand @@ -151,6 +152,27 @@ allOf: - const: gpmi_io - const: gpmi_bch_apb + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-gpmi-nand + then: + properties: + clocks: + items: + - description: SoC gpmi io clock + - description: SoC gpmi apb clock + - description: SoC gpmi bch clock + - description: SoC gpmi bch apb clock + clock-names: + items: + - const: gpmi_io + - const: gpmi_apb + - const: gpmi_bch + - const: gpmi_bch_apb + examples: - | nand-controller@8000c000 { diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml index 4ada60fbf81d..35b4206ea918 100644 --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -31,6 +31,18 @@ properties: - const: core - const: aon + qcom,cmd-crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain the ADM command type CRCI block instance number specified for + the NAND controller on the given platform + + qcom,data-crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain the ADM data type CRCI block instance number specified for + the NAND controller on the given platform + patternProperties: "^nand@[a-f0-9]$": type: object @@ -83,18 +95,6 @@ allOf: items: - const: rxtx - qcom,cmd-crci: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Must contain the ADM command type CRCI block instance number - specified for the NAND controller on the given platform - - qcom,data-crci: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Must contain the ADM data type CRCI block instance number - specified for the NAND controller on the given platform - - if: properties: compatible: @@ -119,19 +119,9 @@ allOf: - const: rx - const: cmd - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq806x-nand + qcom,cmd-crci: false + qcom,data-crci: false - then: - patternProperties: - "^nand@[a-f0-9]$": - properties: - qcom,boot-partitions: true - else: patternProperties: "^nand@[a-f0-9]$": properties: diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml new file mode 100644 index 000000000000..c578637c5826 --- /dev/null +++ b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/airoha,en7581-eth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha EN7581 Frame Engine Ethernet controller + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + +description: + The frame engine ethernet controller can be found on Airoha SoCs. + These SoCs have multi-GMAC ports. + +properties: + compatible: + enum: + - airoha,en7581-eth + + reg: + items: + - description: Frame engine base address + - description: QDMA0 base address + - description: QDMA1 base address + + reg-names: + items: + - const: fe + - const: qdma0 + - const: qdma1 + + interrupts: + items: + - description: QDMA lan irq0 + - description: QDMA lan irq1 + - description: QDMA lan irq2 + - description: QDMA lan irq3 + - description: QDMA wan irq0 + - description: QDMA wan irq1 + - description: QDMA wan irq2 + - description: QDMA wan irq3 + - description: FE error irq + - description: PDMA irq + + resets: + maxItems: 8 + + reset-names: + items: + - const: fe + - const: pdma + - const: qdma + - const: xsi-mac + - const: hsi0-mac + - const: hsi1-mac + - const: hsi-mac + - const: xfp-mac + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^ethernet@[1-4]$": + type: object + unevaluatedProperties: false + $ref: ethernet-controller.yaml# + description: + Ethernet GMAC port associated to the MAC controller + properties: + compatible: + const: airoha,eth-mac + + reg: + minimum: 1 + maximum: 4 + description: GMAC port identifier + + required: + - reg + - compatible + +required: + - compatible + - reg + - interrupts + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/en7523-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + eth: ethernet@1fb50000 { + compatible = "airoha,en7581-eth"; + reg = <0 0x1fb50000 0 0x2600>, + <0 0x1fb54000 0 0x2000>, + <0 0x1fb56000 0 0x2000>; + reg-names = "fe", "qdma0", "qdma1"; + + resets = <&scuclk 44>, + <&scuclk 30>, + <&scuclk 31>, + <&scuclk 6>, + <&scuclk 15>, + <&scuclk 16>, + <&scuclk 17>, + <&scuclk 26>; + reset-names = "fe", "pdma", "qdma", "xsi-mac", + "hsi0-mac", "hsi1-mac", "hsi-mac", + "xfp-mac"; + + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + mac: ethernet@1 { + compatible = "airoha,eth-mac"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt deleted file mode 100644 index c73a0e9c625e..000000000000 --- a/Documentation/devicetree/bindings/net/arc_emac.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Synopsys ARC EMAC 10/100 Ethernet driver (EMAC) - -Required properties: -- compatible: Should be "snps,arc-emac" -- reg: Address and length of the register set for the device -- interrupts: Should contain the EMAC interrupts -- max-speed: see ethernet.txt file in the same directory. -- phy: see ethernet.txt file in the same directory. - -Optional properties: -- phy-reset-gpios : Should specify the gpio for phy reset -- phy-reset-duration : Reset duration in milliseconds. Should present - only if property "phy-reset-gpios" is available. Missing the property - will have the duration be 1 millisecond. Numbers greater than 1000 are - invalid and 1 millisecond will be used instead. - -Clock handling: -The clock frequency is needed to calculate and set polling period of EMAC. -It must be provided by one of: -- clock-frequency: CPU frequency. -- clocks: reference to the clock supplying the EMAC. - -Child nodes of the driver are the individual PHY devices connected to the -MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus. - -Examples: - - ethernet@c0fc2000 { - compatible = "snps,arc-emac"; - reg = <0xc0fc2000 0x3c>; - interrupts = <6>; - mac-address = [ 00 11 22 33 44 55 ]; - - clock-frequency = <80000000>; - /* or */ - clocks = <&emac_clock>; - - max-speed = <100>; - phy = <&phy0>; - - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml new file mode 100644 index 000000000000..3f9e69208127 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7622-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SoC built-in Bluetooth + +description: + This device is a serial attached device to BTIF device and thus it must be a + child node of the serial node with BTIF. The dt-bindings details for BTIF + device can be known via Documentation/devicetree/bindings/serial/8250.yaml. + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +allOf: + - $ref: bluetooth-controller.yaml# + +properties: + compatible: + const: mediatek,mt7622-bluetooth + + clocks: + maxItems: 1 + + clock-names: + const: ref + + power-domains: + maxItems: 1 + +required: + - clocks + - clock-names + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/power/mt7622-power.h> + + serial { + bluetooth { + compatible = "mediatek,mt7622-bluetooth"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; + clocks = <&clk25m>; + clock-names = "ref"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml index f01a3988538c..37a65badb448 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -31,6 +31,9 @@ properties: This property depends on the module vendor's configuration. + firmware-name: + maxItems: 1 + required: - compatible @@ -42,5 +45,6 @@ examples: bluetooth { compatible = "nxp,88w8987-bt"; fw-init-baudrate = <3000000>; + firmware-name = "uartuart8987_bt_v0.bin"; }; }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 055a3351880b..68c5ed111417 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -62,6 +62,9 @@ properties: vdddig-supply: description: VDD_DIG supply regulator handle + vddbtcmx-supply: + description: VDD_BT_CMX supply regulator handle + vddbtcxmx-supply: description: VDD_BT_CXMX supply regulator handle @@ -74,6 +77,9 @@ properties: vddrfa1p7-supply: description: VDD_RFA_1P7 supply regulator handle + vddrfa1p8-supply: + description: VDD_RFA_1P8 supply regulator handle + vddrfa1p2-supply: description: VDD_RFA_1P2 supply regulator handle @@ -86,6 +92,12 @@ properties: vddasd-supply: description: VDD_ASD supply regulator handle + vddwlcx-supply: + description: VDD_WLCX supply regulator handle + + vddwlmx-supply: + description: VDD_WLMX supply regulator handle + max-speed: description: see Documentation/devicetree/bindings/serial/serial.yaml @@ -176,14 +188,27 @@ allOf: - qcom,wcn7850-bt then: required: - - enable-gpios - - swctrl-gpios - - vddio-supply + - vddrfacmn-supply + - vddaon-supply + - vddwlcx-supply + - vddwlmx-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p8-supply + - if: + properties: + compatible: + contains: + enum: + - qcom,qca6390-bt + then: + required: + - vddrfacmn-supply - vddaon-supply - - vdddig-supply + - vddbtcmx-supply - vddrfa0p8-supply - vddrfa1p2-supply - - vddrfa1p9-supply + - vddrfa1p7-supply examples: - | diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml index 8d4e5af6fd6c..40835497050a 100644 --- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/net/can/xilinx,can.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: - Xilinx Axi CAN/Zynq CANPS controller + Xilinx CAN and CANFD controller maintainers: - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 2c71e2cf3a2f..3c30dd23cd4e 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -146,6 +146,7 @@ patternProperties: magic-packet: type: boolean + deprecated: true description: Indicates that the hardware supports waking up via magic packet. diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml new file mode 100644 index 000000000000..f3154b19af78 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq GSWIP Ethernet switches + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +maintainers: + - Hauke Mehrtens <hauke@hauke-m.de> + +properties: + compatible: + enum: + - lantiq,xrx200-gswip + - lantiq,xrx300-gswip + - lantiq,xrx330-gswip + + reg: + minItems: 3 + maxItems: 3 + + reg-names: + items: + - const: switch + - const: mdio + - const: mii + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + + properties: + compatible: + const: lantiq,xrx200-mdio + + required: + - compatible + + gphy-fw: + type: object + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + items: + - enum: + - lantiq,xrx200-gphy-fw + - lantiq,xrx300-gphy-fw + - lantiq,xrx330-gphy-fw + - const: lantiq,gphy-fw + + lantiq,rcu: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the RCU syscon + + patternProperties: + "^gphy@[0-9a-f]{1,2}$": + type: object + + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 255 + description: + Offset of the GPHY firmware register in the RCU register range + + resets: + items: + - description: GPHY reset line + + reset-names: + items: + - const: gphy + + required: + - reg + + required: + - compatible + - lantiq,rcu + + additionalProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + switch@e108000 { + compatible = "lantiq,xrx200-gswip"; + reg = <0xe108000 0x3100>, /* switch */ + <0xe10b100 0xd8>, /* mdio */ + <0xe10b1d8 0x130>; /* mii */ + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan3"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + + port@6 { + reg = <0x6>; + phy-mode = "internal"; + ethernet = <ð0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; + }; + + gphy-fw { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"; + lantiq,rcu = <&rcu0>; + + gphy@20 { + reg = <0x20>; + + resets = <&reset0 31 30>; + reset-names = "gphy"; + }; + + gphy@68 { + reg = <0x68>; + + resets = <&reset0 29 28>; + reset-names = "gphy"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt deleted file mode 100644 index 8bb1eff21cb1..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt +++ /dev/null @@ -1,146 +0,0 @@ -Lantiq GSWIP Ethernet switches -================================== - -Required properties for GSWIP core: - -- compatible : "lantiq,xrx200-gswip" for the embedded GSWIP in the - xRX200 SoC - "lantiq,xrx300-gswip" for the embedded GSWIP in the - xRX300 SoC - "lantiq,xrx330-gswip" for the embedded GSWIP in the - xRX330 SoC -- reg : memory range of the GSWIP core registers - : memory range of the GSWIP MDIO registers - : memory range of the GSWIP MII registers - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of -additional required and optional properties. - - -Required properties for MDIO bus: -- compatible : "lantiq,xrx200-mdio" for the MDIO bus inside the GSWIP - core of the xRX200 SoC and the PHYs connected to it. - -See Documentation/devicetree/bindings/net/mdio.txt for a list of additional -required and optional properties. - - -Required properties for GPHY firmware loading: -- compatible : "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw" - "lantiq,xrx300-gphy-fw", "lantiq,gphy-fw" - "lantiq,xrx330-gphy-fw", "lantiq,gphy-fw" - for the loading of the firmware into the embedded - GPHY core of the SoC. -- lantiq,rcu : reference to the rcu syscon - -The GPHY firmware loader has a list of GPHY entries, one for each -embedded GPHY - -- reg : Offset of the GPHY firmware register in the RCU - register range -- resets : list of resets of the embedded GPHY -- reset-names : list of names of the resets - -Example: - -Ethernet switch on the VRX200 SoC: - -switch@e108000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-gswip"; - reg = < 0xe108000 0x3100 /* switch */ - 0xe10b100 0xd8 /* mdio */ - 0xe10b1d8 0x130 /* mii */ - >; - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan3"; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy11>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy13>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - - port@6 { - reg = <0x6>; - ethernet = <ð0>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - reg = <0>; - - phy0: ethernet-phy@0 { - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - }; - }; - - gphy-fw { - compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"; - lantiq,rcu = <&rcu0>; - #address-cells = <1>; - #size-cells = <0>; - - gphy@20 { - reg = <0x20>; - - resets = <&reset0 31 30>; - reset-names = "gphy"; - }; - - gphy@68 { - reg = <0x68>; - - resets = <&reset0 29 28>; - reset-names = "gphy"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index 1c2444121e60..7e405ad96eb2 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -22,16 +22,16 @@ description: | The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's - memory map rather than using MDIO. The switch got an internally connected 10G + memory map rather than using MDIO. The switch has an internally connected 10G CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs. - MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs + The MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has 10/100 PHYs and the switch registers are directly mapped into SoC's memory map rather than using MDIO. The DSA driver currently doesn't support MT7620 variants. There is only the standalone version of MT7531. - Port 5 on MT7530 has got various ways of configuration: + Port 5 on MT7530 supports various configurations: - Port 5 can be used as a CPU port. diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt deleted file mode 100644 index 258bef483673..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt +++ /dev/null @@ -1,129 +0,0 @@ -Vitesse VSC73xx Switches -======================== - -This defines device tree bindings for the Vitesse VSC73xx switch chips. -The Vitesse company has been acquired by Microsemi and Microsemi has -been acquired Microchip but retains this vendor branding. - -The currently supported switch chips are: -Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch -Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch -Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch -Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch - -This switch could have two different management interface. - -If SPI interface is used, the device tree node is an SPI device so it must -reside inside a SPI bus device tree node, see spi/spi-bus.txt - -When the chip is connected to a parallel memory bus and work in memory-mapped -I/O mode, a platform device is used to represent the vsc73xx. In this case it -must reside inside a platform bus device tree node. - -Required properties: - -- compatible: must be exactly one of: - "vitesse,vsc7385" - "vitesse,vsc7388" - "vitesse,vsc7395" - "vitesse,vsc7398" -- gpio-controller: indicates that this switch is also a GPIO controller, - see gpio/gpio.txt -- #gpio-cells: this must be set to <2> and indicates that we are a twocell - GPIO controller, see gpio/gpio.txt - -Optional properties: - -- reset-gpios: a handle to a GPIO line that can issue reset of the chip. - It should be tagged as active low. - -Required subnodes: - -See net/dsa/dsa.txt for a list of additional required and optional properties -and subnodes of DSA switches. - -Examples: - -SPI: -switch@0 { - compatible = "vitesse,vsc7395"; - reg = <0>; - /* Specified for 2.5 MHz or below */ - spi-max-frequency = <2500000>; - gpio-controller; - #gpio-cells = <2>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - vsc: port@6 { - reg = <6>; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - }; -}; - -Platform: -switch@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "vitesse,vsc7385"; - reg = <0x2 0x0 0x20000>; - reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - vsc: port@6 { - reg = <6>; - ethernet = <&enet0>; - phy-mode = "rgmii"; - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - }; - -}; diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml new file mode 100644 index 000000000000..b99d7a694b70 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/vitesse,vsc73xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Vitesse VSC73xx DSA Switches + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + The Vitesse DSA Switches were produced in the early-to-mid 2000s. + + The Vitesse company has been acquired by Microsemi and Microsemi has + been acquired Microchip but the new owner retains this vendor branding. + + The currently supported switch chips are + Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch + Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch + Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch + Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch + + This switch can use one of two different management interfaces. + + If SPI interface is used, the device tree node is an SPI device so it must + reside inside a SPI bus device tree node, see spi/spi-bus.txt + + When the chip is connected to a parallel memory bus and work in memory-mapped + I/O mode, a platform device is used to represent the vsc73xx. In this case it + must reside inside a platform bus device tree node. + +properties: + compatible: + enum: + - vitesse,vsc7385 + - vitesse,vsc7388 + - vitesse,vsc7395 + - vitesse,vsc7398 + + reg: + maxItems: 1 + + gpio-controller: true + "#gpio-cells": + const: 2 + + reset-gpios: + description: GPIO to be used to reset the whole device + maxItems: 1 + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +# This checks if reg is a chipselect so the device is on an SPI +# bus, the if-clause will fail if reg is a tuple such as for a +# platform device. +if: + properties: + reg: + minimum: 0 + maximum: 256 +then: + $ref: /schemas/spi/spi-peripheral-props.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "vitesse,vsc7395"; + reg = <0>; + spi-max-frequency = <2500000>; + gpio-controller; + #gpio-cells = <2>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan1"; + }; + ethernet-port@1 { + reg = <1>; + label = "lan2"; + }; + ethernet-port@2 { + reg = <2>; + label = "lan3"; + }; + ethernet-port@3 { + reg = <3>; + label = "lan4"; + }; + ethernet-port@6 { + reg = <6>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + bus { + #address-cells = <1>; + #size-cells = <1>; + + ethernet-switch@10000000 { + compatible = "vitesse,vsc7385"; + reg = <0x10000000 0x20000>; + reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan1"; + }; + ethernet-port@1 { + reg = <1>; + label = "lan2"; + }; + ethernet-port@2 { + reg = <2>; + label = "lan3"; + }; + ethernet-port@3 { + reg = <3>; + label = "lan4"; + }; + ethernet-port@6 { + reg = <6>; + ethernet = <&enet0>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index b2785b03139f..45819b235800 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -103,6 +103,7 @@ properties: - usxgmii - 10gbase-r - 25gbase-r + - 10g-qxgmii phy-mode: $ref: "#/properties/phy-connection-type" diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 8fb2a6ee7e5b..d9b62741a225 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -93,6 +93,14 @@ properties: the turn around line low at end of the control phase of the MDIO transaction. + brr-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: + If set, indicates the network cable interface is an alternative one as + defined in the BroadR-Reach link mode specification under 1BR-100 and + 1BR-10 names. The PHY must be configured to operate in BroadR-Reach mode + by software. + clocks: maxItems: 1 description: diff --git a/Documentation/devicetree/bindings/net/fsl,enetc-ierb.yaml b/Documentation/devicetree/bindings/net/fsl,enetc-ierb.yaml new file mode 100644 index 000000000000..c8a654310b90 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,enetc-ierb.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,enetc-ierb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Integrated Endpoint Register Block + +description: + The fsl_enetc driver can probe on the Integrated Endpoint Register Block, + which preconfigures the FIFO limits for the ENETC ports. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + - Vladimir Oltean <vladimir.oltean@nxp.com> + - Wei Fang <wei.fang@nxp.com> + - Claudiu Manoil <claudiu.manoil@nxp.com> + +properties: + compatible: + enum: + - fsl,ls1028a-enetc-ierb + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + endpoint-config@f0800000 { + compatible = "fsl,ls1028a-enetc-ierb"; + reg = <0xf0800000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml new file mode 100644 index 000000000000..c1dd6aa04321 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,enetc-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ENETC external MDIO PCIe endpoint device + +description: + NETC provides an external master MDIO interface (EMDIO) for managing external + devices (PHYs). EMDIO supports both Clause 22 and 45 protocols. And the EMDIO + provides a means for different software modules to share a single set of MDIO + signals to access their PHYs. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + - Vladimir Oltean <vladimir.oltean@nxp.com> + - Wei Fang <wei.fang@nxp.com> + - Claudiu Manoil <claudiu.manoil@nxp.com> + +properties: + compatible: + items: + - enum: + - pci1957,ee01 + - const: fsl,enetc-mdio + + reg: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - $ref: mdio.yaml + - $ref: /schemas/pci/pci-device.yaml + +unevaluatedProperties: false + +examples: + - | + pcie{ + #address-cells = <3>; + #size-cells = <2>; + + mdio@0,3 { + compatible = "pci1957,ee01", "fsl,enetc-mdio"; + reg = <0x000300 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@2 { + reg = <0x2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,enetc.yaml b/Documentation/devicetree/bindings/net/fsl,enetc.yaml new file mode 100644 index 000000000000..e152c93998fe --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,enetc.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,enetc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The NIC functionality of NXP NETC + +description: + The NIC functionality in NETC is known as EtherNET Controller (ENETC). ENETC + supports virtualization/isolation based on PCIe Single Root IO Virtualization + (SR-IOV), advanced QoS with 8 traffic classes and 4 drop resilience levels, + and a full range of TSN standards and NIC offload capabilities + +maintainers: + - Frank Li <Frank.Li@nxp.com> + - Vladimir Oltean <vladimir.oltean@nxp.com> + - Wei Fang <wei.fang@nxp.com> + - Claudiu Manoil <claudiu.manoil@nxp.com> + +properties: + compatible: + items: + - enum: + - pci1957,e100 + - const: fsl,enetc + + reg: + maxItems: 1 + + mdio: + $ref: mdio.yaml + unevaluatedProperties: false + description: Optional child node for ENETC instance, otherwise use NETC EMDIO. + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/pci/pci-device.yaml + - $ref: ethernet-controller.yaml + +unevaluatedProperties: false + +examples: + - | + pcie { + #address-cells = <3>; + #size-cells = <2>; + + ethernet@0,0 { + compatible = "pci1957,e100", "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy@2 { + reg = <0x2>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,fman-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,fman-mdio.yaml new file mode 100644 index 000000000000..6b2c0aa407a2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-mdio.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Frame Manager MDIO Device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: FMan MDIO Node. + The MDIO is a bus to which the PHY devices are connected. + +properties: + compatible: + enum: + - fsl,fman-mdio + - fsl,fman-xmdio + - fsl,fman-memac-mdio + description: + Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2. + Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2. + Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from + FMan v3. + + reg: + maxItems: 1 + + clocks: + items: + - description: A reference to the input clock of the controller + from which the MDC frequency is derived. + + interrupts: + maxItems: 1 + + fsl,fman-internal-mdio: + $ref: /schemas/types.yaml#/definitions/flag + description: + Fman has internal MDIO for internal PCS(Physical + Coding Sublayer) PHYs and external MDIO for external PHYs. + The settings and programming routines for internal/external + MDIO are different. Must be included for internal MDIO. + + fsl,erratum-a009885: + $ref: /schemas/types.yaml#/definitions/flag + description: Indicates the presence of the A009885 + erratum describing that the contents of MDIO_DATA may + become corrupt unless it is read within 16 MDC cycles + of MDIO_CFG[BSY] being cleared, when performing an + MDIO read operation. + + fsl,erratum-a011043: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates the presence of the A011043 erratum + describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely + set when reading internal PCS registers. MDIO reads to + internal PCS registers may result in having the + MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and + read data (MDIO_DATA[MDIO_DATA]) is correct. + Software may get false read error when reading internal + PCS registers through MDIO. As a workaround, all internal + MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. + + For internal PHY device on internal mdio bus, a PHY node should be created. + See the definition of the PHY node in booting-without-of.txt for an + example of how to define a PHY (Internal PHY has no interrupt line). + - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY. + - For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY. + The PCS PHY address should correspond to the value of the appropriate + MDEV_PORT. + + little-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + IP block is little-endian mode. The default endian mode is big-endian. + +required: + - compatible + - reg + +allOf: + - $ref: mdio.yaml# + +unevaluatedProperties: false + +examples: + - | + mdio@f1000 { + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 2 0 0>; + }; + + - | + mdio@e3120 { + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + fsl,fman-internal-mdio; + #address-cells = <1>; + #size-cells = <0>; + + tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + - | + mdio@f1000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0xf1000 0x1000>; + fsl,fman-internal-mdio; + #address-cells = <1>; + #size-cells = <0>; + + pcsphy6: ethernet-phy@0 { + reg = <0x0>; + }; + }; + diff --git a/Documentation/devicetree/bindings/net/fsl,fman-muram.yaml b/Documentation/devicetree/bindings/net/fsl,fman-muram.yaml new file mode 100644 index 000000000000..aa71acc7fa5b --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-muram.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-muram.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Frame Manager MURAM Device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + FMan Internal memory - shared between all the FMan modules. + It contains data structures that are common and written to or read by + the modules. + + FMan internal memory is split into the following parts: + Packet buffering (Tx/Rx FIFOs) + Frames internal context + +properties: + compatible: + enum: + - fsl,fman-muram + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,fman-port.yaml b/Documentation/devicetree/bindings/net/fsl,fman-port.yaml new file mode 100644 index 000000000000..9de445307830 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-port.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-port.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Frame Manager Port Device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + The Frame Manager (FMan) supports several types of hardware ports: + Ethernet receiver (RX) + Ethernet transmitter (TX) + Offline/Host command (O/H) + +properties: + compatible: + enum: + - fsl,fman-v2-port-oh + - fsl,fman-v2-port-rx + - fsl,fman-v2-port-tx + - fsl,fman-v3-port-oh + - fsl,fman-v3-port-rx + - fsl,fman-v3-port-tx + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the hardware port id. + Each hardware port on the FMan has its own hardware PortID. + Super set of all hardware Port IDs available at FMan Reference + Manual under "FMan Hardware Ports in Freescale Devices" table. + + Each hardware port is assigned a 4KB, port-specific page in + the FMan hardware port memory region (which is part of the + FMan memory map). The first 4 KB in the FMan hardware ports + memory region is used for what are called common registers. + The subsequent 63 4KB pages are allocated to the hardware + ports. + The page of a specific port is determined by the cell-index. + + reg: + items: + - description: There is one reg region describing the port + configuration registers. + + fsl,fman-10g-port: + $ref: /schemas/types.yaml#/definitions/flag + description: The default port rate is 1G. + If this property exists, the port is s 10G port. + + fsl,fman-best-effort-port: + $ref: /schemas/types.yaml#/definitions/flag + description: The default port rate is 1G. + Can be defined only if 10G-support is set. + This property marks a best-effort 10G port (10G port that + may not be capable of line rate). + +required: + - compatible + - reg + - cell-index + +additionalProperties: false + +examples: + - | + port@a8000 { + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + cell-index = <0x28>; + }; + diff --git a/Documentation/devicetree/bindings/net/fsl,fman.yaml b/Documentation/devicetree/bindings/net/fsl,fman.yaml new file mode 100644 index 000000000000..9bbf39ef31a2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman.yaml @@ -0,0 +1,210 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Frame Manager Device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs, + etc.) the FMan node will have child nodes for each of them. + +properties: + compatible: + enum: + - fsl,fman + description: + FMan version can be determined via FM_IP_REV_1 register in the + FMan block. The offset is 0xc4 from the beginning of the + Frame Processing Manager memory map (0xc3000 from the + beginning of the FMan node). + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the index of the FMan unit. + + The cell-index value may be used by the SoC, to identify the + FMan unit in the SoC memory map. In the table below, + there's a description of the cell-index use in each SoC: + + - P1023: + register[bit] FMan unit cell-index + ============================================================ + DEVDISR[1] 1 0 + + - P2041, P3041, P4080 P5020, P5040: + register[bit] FMan unit cell-index + ============================================================ + DCFG_DEVDISR2[6] 1 0 + DCFG_DEVDISR2[14] 2 1 + (Second FM available only in P4080 and P5040) + + - B4860, T1040, T2080, T4240: + register[bit] FMan unit cell-index + ============================================================ + DCFG_CCSR_DEVDISR2[24] 1 0 + DCFG_CCSR_DEVDISR2[25] 2 1 + (Second FM available only in T4240) + + DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in + the specific SoC "Device Configuration/Pin Control" Memory + Map. + + reg: + items: + - description: BMI configuration registers. + - description: QMI configuration registers. + - description: DMA configuration registers. + - description: FPM configuration registers. + - description: FMan controller configuration registers. + minItems: 1 + + ranges: true + + clocks: + maxItems: 1 + + clock-names: + items: + - const: fmanclk + + interrupts: + items: + - description: The first element is associated with the event interrupts. + - description: the second element is associated with the error interrupts. + + dma-coherent: true + + ptimer-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: see ptp/fsl,ptp.yaml + + fsl,qman-channel-range: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Specifies the range of the available dedicated + channels in the FMan. The first cell specifies the beginning + of the range and the second cell specifies the number of + channels + items: + - description: The first cell specifies the beginning of the range. + - description: | + The second cell specifies the number of channels. + Further information available at: + "Work Queue (WQ) Channel Assignments in the QMan" section + in DPAA Reference Manual. + + fsl,qman: + $ref: /schemas/types.yaml#/definitions/phandle + description: See soc/fsl/qman.txt + + fsl,bman: + $ref: /schemas/types.yaml#/definitions/phandle + description: See soc/fsl/bman.txt + + fsl,erratum-a050385: + $ref: /schemas/types.yaml#/definitions/flag + description: A boolean property. Indicates the presence of the + erratum A050385 which indicates that DMA transactions that are + split can result in a FMan lock. + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + '^muram@[a-f0-9]+$': + $ref: fsl,fman-muram.yaml + + '^port@[a-f0-9]+$': + $ref: fsl,fman-port.yaml + + '^ethernet@[a-f0-9]+$': + $ref: fsl,fman-dtsec.yaml + + '^mdio@[a-f0-9]+$': + $ref: fsl,fman-mdio.yaml + + '^phc@[a-f0-9]+$': + $ref: /schemas/ptp/fsl,ptp.yaml + +required: + - compatible + - cell-index + - reg + - ranges + - clocks + - clock-names + - interrupts + - fsl,qman-channel-range + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + fman@400000 { + compatible = "fsl,fman"; + reg = <0x400000 0x100000>; + ranges = <0 0x400000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + clocks = <&fman_clk>; + clock-names = "fmanclk"; + interrupts = <96 IRQ_TYPE_EDGE_FALLING>, + <16 IRQ_TYPE_EDGE_FALLING>; + fsl,qman-channel-range = <0x40 0xc>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + port@81000 { + cell-index = <1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + fman1_rx_0x8: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + compatible = "fsl,fman-dtsec"; + cell-index = <0>; + reg = <0xe0000 0x1000>; + ptp-timer = <&ptp_timer>; + fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>; + tbi-handle = <&tbi5>; + }; + + ptp_timer: phc@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; + + mdio@f1000 { + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt deleted file mode 100644 index 9b9a3f197e2d..000000000000 --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt +++ /dev/null @@ -1,119 +0,0 @@ -* ENETC ethernet device tree bindings - -Depending on board design and ENETC port type (internal or -external) there are two supported link modes specified by -below device tree bindings. - -Required properties: - -- reg : Specifies PCIe Device Number and Function - Number of the ENETC endpoint device, according - to parent node bindings. -- compatible : Should be "fsl,enetc". - -1. The ENETC external port is connected to a MDIO configurable phy - -1.1. Using the local ENETC Port MDIO interface - -In this case, the ENETC node should include a "mdio" sub-node -that in turn should contain the "ethernet-phy" node describing the -external phy. Below properties are required, their bindings -already defined in Documentation/devicetree/bindings/net/ethernet.txt or -Documentation/devicetree/bindings/net/phy.txt. - -Required: - -- phy-handle : Phandle to a PHY on the MDIO bus. - Defined in ethernet.txt. - -- phy-connection-type : Defined in ethernet.txt. - -- mdio : "mdio" node, defined in mdio.txt. - -- ethernet-phy : "ethernet-phy" node, defined in phy.txt. - -Example: - - ethernet@0,0 { - compatible = "fsl,enetc"; - reg = <0x000000 0 0 0 0>; - phy-handle = <&sgmii_phy0>; - phy-connection-type = "sgmii"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - sgmii_phy0: ethernet-phy@2 { - reg = <0x2>; - }; - }; - }; - -1.2. Using the central MDIO PCIe endpoint device - -In this case, the mdio node should be defined as another PCIe -endpoint node, at the same level with the ENETC port nodes. - -Required properties: - -- reg : Specifies PCIe Device Number and Function - Number of the ENETC endpoint device, according - to parent node bindings. -- compatible : Should be "fsl,enetc-mdio". - -The remaining required mdio bus properties are standard, their bindings -already defined in Documentation/devicetree/bindings/net/mdio.txt. - -Example: - - ethernet@0,0 { - compatible = "fsl,enetc"; - reg = <0x000000 0 0 0 0>; - phy-handle = <&sgmii_phy0>; - phy-connection-type = "sgmii"; - }; - - mdio@0,3 { - compatible = "fsl,enetc-mdio"; - reg = <0x000300 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; - sgmii_phy0: ethernet-phy@2 { - reg = <0x2>; - }; - }; - -2. The ENETC port is an internal port or has a fixed-link external -connection - -In this case, the ENETC port node defines a fixed link connection, -as specified by Documentation/devicetree/bindings/net/fixed-link.txt. - -Required: - -- fixed-link : "fixed-link" node, defined in "fixed-link.txt". - -Example: - ethernet@0,2 { - compatible = "fsl,enetc"; - reg = <0x000200 0 0 0 0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - -* Integrated Endpoint Register Block bindings - -Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register -Block, which preconfigures the FIFO limits for the ENETC ports. This is a node -with the following properties: - -- reg : Specifies the address in the SoC memory space. -- compatible : Must be "fsl,ls1028a-enetc-ierb". - -Example: - ierb@1f0800000 { - compatible = "fsl,ls1028a-enetc-ierb"; - reg = <0x01 0xf0800000 0x0 0x10000>; - }; diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt deleted file mode 100644 index bda4b41af074..000000000000 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ /dev/null @@ -1,548 +0,0 @@ -============================================================================= -Freescale Frame Manager Device Bindings - -CONTENTS - - FMan Node - - FMan Port Node - - FMan MURAM Node - - FMan dTSEC/XGEC/mEMAC Node - - FMan IEEE 1588 Node - - FMan MDIO Node - - Example - -============================================================================= -FMan Node - -DESCRIPTION - -Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs, -etc.) the FMan node will have child nodes for each of them. - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: Must include "fsl,fman" - FMan version can be determined via FM_IP_REV_1 register in the - FMan block. The offset is 0xc4 from the beginning of the - Frame Processing Manager memory map (0xc3000 from the - beginning of the FMan node). - -- cell-index - Usage: required - Value type: <u32> - Definition: Specifies the index of the FMan unit. - - The cell-index value may be used by the SoC, to identify the - FMan unit in the SoC memory map. In the table below, - there's a description of the cell-index use in each SoC: - - - P1023: - register[bit] FMan unit cell-index - ============================================================ - DEVDISR[1] 1 0 - - - P2041, P3041, P4080 P5020, P5040: - register[bit] FMan unit cell-index - ============================================================ - DCFG_DEVDISR2[6] 1 0 - DCFG_DEVDISR2[14] 2 1 - (Second FM available only in P4080 and P5040) - - - B4860, T1040, T2080, T4240: - register[bit] FMan unit cell-index - ============================================================ - DCFG_CCSR_DEVDISR2[24] 1 0 - DCFG_CCSR_DEVDISR2[25] 2 1 - (Second FM available only in T4240) - - DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in - the specific SoC "Device Configuration/Pin Control" Memory - Map. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the offset of the - following configuration registers: - - BMI configuration registers. - - QMI configuration registers. - - DMA configuration registers. - - FPM configuration registers. - - FMan controller configuration registers. - -- ranges - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - -- clocks - Usage: required - Value type: <prop-encoded-array> - Definition: phandle for the fman input clock. - -- clock-names - usage: required - Value type: <stringlist> - Definition: "fmanclk" for the fman input clock. - -- interrupts - Usage: required - Value type: <prop-encoded-array> - Definition: A pair of IRQs are specified in this property. - The first element is associated with the event interrupts and - the second element is associated with the error interrupts. - -- fsl,qman-channel-range - Usage: required - Value type: <prop-encoded-array> - Definition: Specifies the range of the available dedicated - channels in the FMan. The first cell specifies the beginning - of the range and the second cell specifies the number of - channels. - Further information available at: - "Work Queue (WQ) Channel Assignments in the QMan" section - in DPAA Reference Manual. - -- fsl,qman -- fsl,bman - Usage: required - Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt - -- fsl,erratum-a050385 - Usage: optional - Value type: boolean - Definition: A boolean property. Indicates the presence of the - erratum A050385 which indicates that DMA transactions that are - split can result in a FMan lock. - -============================================================================= -FMan MURAM Node - -DESCRIPTION - -FMan Internal memory - shared between all the FMan modules. -It contains data structures that are common and written to or read by -the modules. -FMan internal memory is split into the following parts: - Packet buffering (Tx/Rx FIFOs) - Frames internal context - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: Must include "fsl,fman-muram" - -- ranges - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - Specifies the multi-user memory offset and the size within - the FMan. - -EXAMPLE - -muram@0 { - compatible = "fsl,fman-muram"; - ranges = <0 0x000000 0x28000>; -}; - -============================================================================= -FMan Port Node - -DESCRIPTION - -The Frame Manager (FMan) supports several types of hardware ports: - Ethernet receiver (RX) - Ethernet transmitter (TX) - Offline/Host command (O/H) - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: A standard property. - Must include one of the following: - - "fsl,fman-v2-port-oh" for FManV2 OH ports - - "fsl,fman-v2-port-rx" for FManV2 RX ports - - "fsl,fman-v2-port-tx" for FManV2 TX ports - - "fsl,fman-v3-port-oh" for FManV3 OH ports - - "fsl,fman-v3-port-rx" for FManV3 RX ports - - "fsl,fman-v3-port-tx" for FManV3 TX ports - -- cell-index - Usage: required - Value type: <u32> - Definition: Specifies the hardware port id. - Each hardware port on the FMan has its own hardware PortID. - Super set of all hardware Port IDs available at FMan Reference - Manual under "FMan Hardware Ports in Freescale Devices" table. - - Each hardware port is assigned a 4KB, port-specific page in - the FMan hardware port memory region (which is part of the - FMan memory map). The first 4 KB in the FMan hardware ports - memory region is used for what are called common registers. - The subsequent 63 4KB pages are allocated to the hardware - ports. - The page of a specific port is determined by the cell-index. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: There is one reg region describing the port - configuration registers. - -- fsl,fman-10g-port - Usage: optional - Value type: boolean - Definition: The default port rate is 1G. - If this property exists, the port is s 10G port. - -- fsl,fman-best-effort-port - Usage: optional - Value type: boolean - Definition: Can be defined only if 10G-support is set. - This property marks a best-effort 10G port (10G port that - may not be capable of line rate). - -EXAMPLE - -port@a8000 { - cell-index = <0x28>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa8000 0x1000>; -}; - -port@88000 { - cell-index = <0x8>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x88000 0x1000>; -}; - -port@81000 { - cell-index = <0x1>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x81000 0x1000>; -}; - -============================================================================= -FMan dTSEC/XGEC/mEMAC Node - -Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml - -============================================================================ -FMan IEEE 1588 Node - -Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt - -============================================================================= -FMan MDIO Node - -DESCRIPTION - -The MDIO is a bus to which the PHY devices are connected. - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: A standard property. - Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2. - Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2. - Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from - FMan v3. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - -- clocks - Usage: optional - Value type: <phandle> - Definition: A reference to the input clock of the controller - from which the MDC frequency is derived. - -- clock-frequency - Usage: optional - Value type: <u32> - Definition: Specifies the external MDC frequency, in Hertz, to - be used. Requires that the input clock is specified in the - "clocks" property. See also: mdio.yaml. - -- suppress-preamble - Usage: optional - Value type: <boolean> - Definition: Disable generation of preamble bits. See also: - mdio.yaml. - -- interrupts - Usage: required for external MDIO - Value type: <prop-encoded-array> - Definition: Event interrupt of external MDIO controller. - -- fsl,fman-internal-mdio - Usage: required for internal MDIO - Value type: boolean - Definition: Fman has internal MDIO for internal PCS(Physical - Coding Sublayer) PHYs and external MDIO for external PHYs. - The settings and programming routines for internal/external - MDIO are different. Must be included for internal MDIO. - -- fsl,erratum-a009885 - Usage: optional - Value type: <boolean> - Definition: Indicates the presence of the A009885 - erratum describing that the contents of MDIO_DATA may - become corrupt unless it is read within 16 MDC cycles - of MDIO_CFG[BSY] being cleared, when performing an - MDIO read operation. - -- fsl,erratum-a011043 - Usage: optional - Value type: <boolean> - Definition: Indicates the presence of the A011043 erratum - describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely - set when reading internal PCS registers. MDIO reads to - internal PCS registers may result in having the - MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and - read data (MDIO_DATA[MDIO_DATA]) is correct. - Software may get false read error when reading internal - PCS registers through MDIO. As a workaround, all internal - MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. - -For internal PHY device on internal mdio bus, a PHY node should be created. -See the definition of the PHY node in booting-without-of.txt for an -example of how to define a PHY (Internal PHY has no interrupt line). -- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY. -- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY. - The PCS PHY address should correspond to the value of the appropriate - MDEV_PORT. - -EXAMPLE - -Example for FMan v2 external MDIO: - -mdio@f1000 { - compatible = "fsl,fman-xmdio"; - reg = <0xf1000 0x1000>; - interrupts = <101 2 0 0>; -}; - -Example for FMan v2 internal MDIO: - -mdio@e3120 { - compatible = "fsl,fman-mdio"; - reg = <0xe3120 0xee0>; - fsl,fman-internal-mdio; - - tbi1: tbi-phy@8 { - reg = <0x8>; - device_type = "tbi-phy"; - }; -}; - -Example for FMan v3 internal MDIO: - -mdio@f1000 { - compatible = "fsl,fman-memac-mdio"; - reg = <0xf1000 0x1000>; - fsl,fman-internal-mdio; - - pcsphy6: ethernet-phy@0 { - reg = <0x0>; - }; -}; - -============================================================================= -Example - -fman@400000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - compatible = "fsl,fman" - ranges = <0 0x400000 0x100000>; - reg = <0x400000 0x100000>; - clocks = <&fman_clk>; - clock-names = "fmanclk"; - interrupts = < - 96 2 0 0 - 16 2 1 1>; - fsl,qman-channel-range = <0x40 0xc>; - - muram@0 { - compatible = "fsl,fman-muram"; - reg = <0x0 0x28000>; - }; - - port@81000 { - cell-index = <1>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x81000 0x1000>; - }; - - port@82000 { - cell-index = <2>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x82000 0x1000>; - }; - - port@83000 { - cell-index = <3>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x83000 0x1000>; - }; - - port@84000 { - cell-index = <4>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x84000 0x1000>; - }; - - port@85000 { - cell-index = <5>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x85000 0x1000>; - }; - - port@86000 { - cell-index = <6>; - compatible = "fsl,fman-v2-port-oh"; - reg = <0x86000 0x1000>; - }; - - fman1_rx_0x8: port@88000 { - cell-index = <0x8>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x88000 0x1000>; - }; - - fman1_rx_0x9: port@89000 { - cell-index = <0x9>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x89000 0x1000>; - }; - - fman1_rx_0xa: port@8a000 { - cell-index = <0xa>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x8a000 0x1000>; - }; - - fman1_rx_0xb: port@8b000 { - cell-index = <0xb>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x8b000 0x1000>; - }; - - fman1_rx_0xc: port@8c000 { - cell-index = <0xc>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x8c000 0x1000>; - }; - - fman1_rx_0x10: port@90000 { - cell-index = <0x10>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x90000 0x1000>; - }; - - fman1_tx_0x28: port@a8000 { - cell-index = <0x28>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa8000 0x1000>; - }; - - fman1_tx_0x29: port@a9000 { - cell-index = <0x29>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa9000 0x1000>; - }; - - fman1_tx_0x2a: port@aa000 { - cell-index = <0x2a>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xaa000 0x1000>; - }; - - fman1_tx_0x2b: port@ab000 { - cell-index = <0x2b>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xab000 0x1000>; - }; - - fman1_tx_0x2c: port@ac0000 { - cell-index = <0x2c>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xac000 0x1000>; - }; - - fman1_tx_0x30: port@b0000 { - cell-index = <0x30>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xb0000 0x1000>; - }; - - ethernet@e0000 { - compatible = "fsl,fman-dtsec"; - cell-index = <0>; - reg = <0xe0000 0x1000>; - fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>; - tbi-handle = <&tbi5>; - }; - - ethernet@e2000 { - compatible = "fsl,fman-dtsec"; - cell-index = <1>; - reg = <0xe2000 0x1000>; - fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>; - tbi-handle = <&tbi6>; - }; - - ethernet@e4000 { - compatible = "fsl,fman-dtsec"; - cell-index = <2>; - reg = <0xe4000 0x1000>; - fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>; - tbi-handle = <&tbi7>; - }; - - ethernet@e6000 { - compatible = "fsl,fman-dtsec"; - cell-index = <3>; - reg = <0xe6000 0x1000>; - fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>; - tbi-handle = <&tbi8>; - }; - - ethernet@e8000 { - compatible = "fsl,fman-dtsec"; - cell-index = <4>; - reg = <0xf0000 0x1000>; - fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>; - tbi-handle = <&tbi9>; - - ethernet@f0000 { - cell-index = <8>; - compatible = "fsl,fman-xgec"; - reg = <0xf0000 0x1000>; - fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; - }; - - ptp-timer@fe000 { - compatible = "fsl,fman-ptp-timer"; - reg = <0xfe000 0x1000>; - }; - - mdio@f1000 { - compatible = "fsl,fman-xmdio"; - reg = <0xf1000 0x1000>; - interrupts = <101 2 0 0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 047bdf7bdd2f..9c9668c1b6a2 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -86,4 +86,4 @@ Example: * Gianfar PTP clock nodes -Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt +Refer to Documentation/devicetree/bindings/ptp/fsl,ptp.yaml diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt index 464c0dafc617..c09eec6422ac 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt @@ -19,16 +19,6 @@ Optional properties: [1] Documentation/devicetree/bindings/net/ethernet.txt -* Ethernet ppe node: -Control rx & tx fifos of all ethernet controllers. -Have 2048 recv channels shared by all ethernet controllers, only if no overlap. -Each controller's recv channel start from channel * number (RX_DESC_NUM). - -Required properties: -- compatible: "hisilicon,hip04-ppe", "syscon". -- reg: address and length of the register set for the device. - - * MDIO bus node: Required properties: diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index 3202dc7967c5..686b5c2fae40 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -68,6 +68,17 @@ properties: Phandle to the syscon node that handles the path from GMAC to PHY variants. + mediatek,pcie-mirror: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek pcie-mirror controller. + + mediatek,pctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the ports slew rate and + driver current. + mediatek,sgmiisys: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 @@ -131,15 +142,12 @@ allOf: mediatek,infracfg: false - mediatek,pctl: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle to the syscon node that handles the ports slew rate and - driver current. - mediatek,wed: false mediatek,wed-pcie: false + else: + properties: + mediatek,pctl: false - if: properties: @@ -201,12 +209,10 @@ allOf: minItems: 1 maxItems: 1 - mediatek,pcie-mirror: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle to the mediatek pcie-mirror controller. - mediatek,wed-pcie: false + else: + properties: + mediatek,pcie-mirror: false - if: properties: diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 9ef5bacda8c1..988c72685cbf 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -1,39 +1,3 @@ -MediaTek SoC built-in Bluetooth Devices -================================== - -This device is a serial attached device to BTIF device and thus it must be a -child node of the serial node with BTIF. The dt-bindings details for BTIF -device can be known via Documentation/devicetree/bindings/serial/8250.yaml. - -Required properties: - -- compatible: Must be - "mediatek,mt7622-bluetooth": for MT7622 SoC -- clocks: Should be the clock specifiers corresponding to the entry in - clock-names property. -- clock-names: Should contain "ref" entries. -- power-domains: Phandle to the power domain that the device is part of - -Example: - - btif: serial@1100c000 { - compatible = "mediatek,mt7622-btif", - "mediatek,mtk-btif"; - reg = <0 0x1100c000 0 0x1000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_BTIF_PD>; - clock-names = "main"; - reg-shift = <2>; - reg-io-width = <4>; - - bluetooth { - compatible = "mediatek,mt7622-bluetooth"; - power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; - clocks = <&clk25m>; - clock-names = "ref"; - }; - }; - MediaTek UART based Bluetooth Devices ================================== diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml index 5b292e7c9e46..792f26b06b06 100644 --- a/Documentation/devicetree/bindings/net/mscc,miim.yaml +++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml @@ -38,6 +38,16 @@ properties: clock-frequency: true + resets: + items: + - description: + Reset shared with all blocks attached to the Switch Core Register + Bus (CSR) including VRAP slave. + + reset-names: + items: + - const: switch + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml b/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml new file mode 100644 index 000000000000..e77eec9ac9ee --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/snps,dw-xpcs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare Ethernet PCS + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + Synopsys DesignWare Ethernet Physical Coding Sublayer provides an interface + between Media Access Control and Physical Medium Attachment Sublayer through + the Media Independent Interface (XGMII, USXGMII, XLGMII, GMII, etc) + controlled by means of the IEEE std. Clause 45 registers set. The PCS can be + optionally synthesized with a vendor-specific interface connected to + Synopsys PMA (also called DesignWare Consumer/Enterprise PHY) although in + general it can be used to communicate with any compatible PHY. + + The PCS CSRs can be accessible either over the Ethernet MDIO bus or directly + by means of the APB3/MCI interfaces. In the later case the XPCS can be mapped + right to the system IO memory space. + +properties: + compatible: + oneOf: + - description: Synopsys DesignWare XPCS with none or unknown PMA + const: snps,dw-xpcs + - description: Synopsys DesignWare XPCS with Consumer Gen1 3G PMA + const: snps,dw-xpcs-gen1-3g + - description: Synopsys DesignWare XPCS with Consumer Gen2 3G PMA + const: snps,dw-xpcs-gen2-3g + - description: Synopsys DesignWare XPCS with Consumer Gen2 6G PMA + const: snps,dw-xpcs-gen2-6g + - description: Synopsys DesignWare XPCS with Consumer Gen4 3G PMA + const: snps,dw-xpcs-gen4-3g + - description: Synopsys DesignWare XPCS with Consumer Gen4 6G PMA + const: snps,dw-xpcs-gen4-6g + - description: Synopsys DesignWare XPCS with Consumer Gen5 10G PMA + const: snps,dw-xpcs-gen5-10g + - description: Synopsys DesignWare XPCS with Consumer Gen5 12G PMA + const: snps,dw-xpcs-gen5-12g + + reg: + items: + - description: + In case of the MDIO management interface this just a 5-bits ID + of the MDIO bus device. If DW XPCS CSRs space is accessed over the + MCI or APB3 management interfaces, then the space mapping can be + either 'direct' or 'indirect'. In the former case all Clause 45 + registers are contiguously mapped within the address space + MMD '[20:16]', Reg '[15:0]'. In the later case the space is divided + to the multiple 256 register sets. There is a special viewport CSR + which is responsible for the set selection. The upper part of + the CSR address MMD+REG[20:8] is supposed to be written in there + so the corresponding subset would be mapped to the lowest 255 CSRs. + + reg-names: + items: + - enum: [ direct, indirect ] + + reg-io-width: + description: + The way the CSRs are mapped to the memory is platform depended. Since + each Clause 45 CSR is of 16-bits wide the access instructions must be + two bytes aligned at least. + default: 2 + enum: [ 2, 4 ] + + interrupts: + description: + System interface interrupt output (sbd_intr_o) indicating Clause 73/37 + auto-negotiation events':' Page received, AN is completed or incompatible + link partner. + maxItems: 1 + + clocks: + description: + The MCI and APB3 interfaces are supposed to be equipped with a clock + source connected to the clk_csr_i line. + + PCS/PMA layer can be clocked by an internal reference clock source + (phyN_core_refclk) or by an externally connected (phyN_pad_refclk) clock + generator. Both clocks can be supplied at a time. + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - minItems: 1 + items: # MDIO + - enum: [core, pad] + - const: pad + - minItems: 1 + items: # MCI or APB + - const: csr + - enum: [core, pad] + - const: pad + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet-pcs@1f05d000 { + compatible = "snps,dw-xpcs"; + reg = <0x1f05d000 0x1000>; + reg-names = "indirect"; + + reg-io-width = <4>; + + interrupts = <79 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&ccu_pclk>, <&ccu_core>, <&ccu_pad>; + clock-names = "csr", "core", "pad"; + }; + - | + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pcs@0 { + compatible = "snps,dw-xpcs"; + reg = <0>; + + clocks = <&ccu_core>, <&ccu_pad>; + clock-names = "core", "pad"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml index bb94a2388520..d248a08a2136 100644 --- a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml @@ -14,10 +14,32 @@ maintainers: description: Bindings for Realtek RTL82xx PHYs -allOf: - - $ref: ethernet-phy.yaml# - properties: + compatible: + enum: + - ethernet-phy-id001c.c800 + - ethernet-phy-id001c.c816 + - ethernet-phy-id001c.c838 + - ethernet-phy-id001c.c840 + - ethernet-phy-id001c.c848 + - ethernet-phy-id001c.c849 + - ethernet-phy-id001c.c84a + - ethernet-phy-id001c.c862 + - ethernet-phy-id001c.c878 + - ethernet-phy-id001c.c880 + - ethernet-phy-id001c.c910 + - ethernet-phy-id001c.c912 + - ethernet-phy-id001c.c913 + - ethernet-phy-id001c.c914 + - ethernet-phy-id001c.c915 + - ethernet-phy-id001c.c916 + - ethernet-phy-id001c.c942 + - ethernet-phy-id001c.c961 + - ethernet-phy-id001c.cad0 + - ethernet-phy-id001c.cb00 + + leds: true + realtek,clkout-disable: type: boolean description: @@ -31,6 +53,18 @@ properties: unevaluatedProperties: false +allOf: + - $ref: ethernet-phy.yaml# + - if: + not: + properties: + compatible: + contains: + const: ethernet-phy-id001c.c916 + then: + properties: + leds: false + examples: - | mdio { diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 21cc27e75f50..3eb65e63fdae 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -76,6 +76,7 @@ properties: - rockchip,rk3128-gmac - rockchip,rk3228-gmac - rockchip,rk3288-gmac + - rockchip,rk3308-gmac - rockchip,rk3328-gmac - rockchip,rk3366-gmac - rockchip,rk3368-gmac @@ -435,6 +436,32 @@ properties: description: Use Address-Aligned Beats + snps,pbl: + description: + Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,txpbl: + description: + Tx Programmable Burst Length. If set, DMA tx will use this + value rather than snps,pbl. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,rxpbl: + description: + Rx Programmable Burst Length. If set, DMA rx will use this + value rather than snps,pbl. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32] + + snps,no-pbl-x8: + $ref: /schemas/types.yaml#/definitions/flag + description: + Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core + rev < 3.50, don\'t multiply the values by 4. + snps,fixed-burst: $ref: /schemas/types.yaml#/definitions/flag description: @@ -485,6 +512,12 @@ properties: description: Frequency division factor for MDC clock. + snps,tso: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enables the TSO feature otherwise it will be managed by MAC HW capability + register. + mdio: $ref: mdio.yaml# unevaluatedProperties: false @@ -568,95 +601,38 @@ allOf: - if: properties: compatible: - contains: - enum: - - allwinner,sun7i-a20-gmac - - allwinner,sun8i-a83t-emac - - allwinner,sun8i-h3-emac - - allwinner,sun8i-r40-gmac - - allwinner,sun8i-v3s-emac - - allwinner,sun50i-a64-emac - - ingenic,jz4775-mac - - ingenic,x1000-mac - - ingenic,x1600-mac - - ingenic,x1830-mac - - ingenic,x2000-mac - - qcom,sa8775p-ethqos - - qcom,sc8280xp-ethqos - - snps,dwmac-3.50a - - snps,dwmac-4.10a - - snps,dwmac-4.20a - - snps,dwmac-5.20 - - snps,dwxgmac - - snps,dwxgmac-2.10 - - st,spear600-gmac - - then: - properties: - snps,pbl: - description: - Programmable Burst Length (tx and rx) - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,txpbl: - description: - Tx Programmable Burst Length. If set, DMA tx will use this - value rather than snps,pbl. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,rxpbl: - description: - Rx Programmable Burst Length. If set, DMA rx will use this - value rather than snps,pbl. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8, 16, 32] - - snps,no-pbl-x8: - $ref: /schemas/types.yaml#/definitions/flag - description: - Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core - rev < 3.50, don\'t multiply the values by 4. - - - if: - properties: - compatible: - contains: - enum: - - allwinner,sun7i-a20-gmac - - allwinner,sun8i-a83t-emac - - allwinner,sun8i-h3-emac - - allwinner,sun8i-r40-gmac - - allwinner,sun8i-v3s-emac - - allwinner,sun50i-a64-emac - - loongson,ls2k-dwmac - - loongson,ls7a-dwmac - - ingenic,jz4775-mac - - ingenic,x1000-mac - - ingenic,x1600-mac - - ingenic,x1830-mac - - ingenic,x2000-mac - - qcom,qcs404-ethqos - - qcom,sa8775p-ethqos - - qcom,sc8280xp-ethqos - - qcom,sm8150-ethqos - - snps,dwmac-4.00 - - snps,dwmac-4.10a - - snps,dwmac-4.20a - - snps,dwmac-5.10a - - snps,dwmac-5.20 - - snps,dwxgmac - - snps,dwxgmac-2.10 - - st,spear600-gmac + not: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-gmac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac + - ingenic,jz4775-mac + - ingenic,x1000-mac + - ingenic,x1600-mac + - ingenic,x1830-mac + - ingenic,x2000-mac + - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos + - qcom,sc8280xp-ethqos + - qcom,sm8150-ethqos + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwmac-4.20a + - snps,dwmac-5.10a + - snps,dwmac-5.20 + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac then: properties: - snps,tso: - $ref: /schemas/types.yaml#/definitions/flag - description: - Enables the TSO feature otherwise it will be managed by - MAC HW capability register. + snps,tso: false additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 7ccf75676b6d..bf23838fe6e8 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -22,18 +22,22 @@ select: enum: - st,stm32-dwmac - st,stm32mp1-dwmac + - st,stm32mp13-dwmac + - st,stm32mp25-dwmac required: - compatible -allOf: - - $ref: snps,dwmac.yaml# - properties: compatible: oneOf: - items: - enum: + - st,stm32mp25-dwmac + - const: snps,dwmac-5.20 + - items: + - enum: - st,stm32mp1-dwmac + - st,stm32mp13-dwmac - const: snps,dwmac-4.20a - items: - enum: @@ -75,12 +79,15 @@ properties: st,syscon: $ref: /schemas/types.yaml#/definitions/phandle-array items: - - items: + - minItems: 2 + items: - description: phandle to the syscon node which encompases the glue register - description: offset of the control register + - description: field to set mask in register description: Should be phandle/offset pair. The phandle to the syscon node which - encompases the glue register, and the offset of the control register + encompases the glue register, the offset of the control register and + the mask to set bitfield in control register st,ext-phyclk: description: @@ -112,12 +119,40 @@ required: unevaluatedProperties: false +allOf: + - $ref: snps,dwmac.yaml# + - if: + properties: + compatible: + contains: + enum: + - st,stm32-dwmac + - st,stm32mp1-dwmac + - st,stm32mp25-dwmac + then: + properties: + st,syscon: + items: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - st,stm32mp13-dwmac + then: + properties: + st,syscon: + items: + minItems: 3 + maxItems: 3 + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> - #include <dt-bindings/reset/stm32mp1-resets.h> - #include <dt-bindings/mfd/stm32h7-rcc.h> //Example 1 ethernet0: ethernet@5800a000 { compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml index f5c22d6dcaee..e36e3a622904 100644 --- a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml +++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml @@ -28,6 +28,15 @@ properties: maxItems: 1 description: phandle to the IEP source clock + interrupts: + maxItems: 1 + description: + Interrupt specifier for capture/compare IRQ. + + interrupt-names: + items: + - const: iep_cap_cmp + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml index e253fa786092..c296e5711848 100644 --- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -55,6 +55,14 @@ properties: description: phandle to MII_RT module's syscon regmap + ti,pa-stats: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to PA_STATS module's syscon regmap. PA_STATS is a set of + registers where different statistics related to ICSSG, are dumped by + ICSSG firmware. PA_STATS module's syscon regmap will help the device to + access/read/write those statistics. + ti,iep: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 2 @@ -194,6 +202,7 @@ examples: "tx1-0", "tx1-1", "tx1-2", "tx1-3", "rx0", "rx1"; ti,mii-g-rt = <&icssg2_mii_g_rt>; + ti,pa-stats = <&icssg2_pa_stats>; ti,iep = <&icssg2_iep0>, <&icssg2_iep1>; interrupt-parent = <&icssg2_intc>; interrupts = <24 0 2>, <25 1 3>; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index 5c4498b762c8..070c4c9b8643 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -128,6 +128,11 @@ properties: Whether to skip executing an SCM call that reassigns the memory region ownership. + qcom,no-msa-ready-indicator: + type: boolean + description: + Don't wait for MSA_READY indicator to complete init. + qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used by the AP to signal the WLAN Q6. diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml index 41d023797d7d..8675d7d0215c 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml @@ -17,6 +17,7 @@ description: | properties: compatible: enum: + - pci17cb,1101 # QCA6390 - pci17cb,1103 # WCN6855 reg: @@ -28,10 +29,55 @@ properties: string to uniquely identify variant of the calibration data for designs with colliding bus and device ids + vddrfacmn-supply: + description: VDD_RFA_CMN supply regulator handle + + vddaon-supply: + description: VDD_AON supply regulator handle + + vddwlcx-supply: + description: VDD_WL_CX supply regulator handle + + vddwlmx-supply: + description: VDD_WL_MX supply regulator handle + + vddrfa0p8-supply: + description: VDD_RFA_0P8 supply regulator handle + + vddrfa1p2-supply: + description: VDD_RFA_1P2 supply regulator handle + + vddrfa1p7-supply: + description: VDD_RFA_1P7 supply regulator handle + + vddpcie0p9-supply: + description: VDD_PCIE_0P9 supply regulator handle + + vddpcie1p8-supply: + description: VDD_PCIE_1P8 supply regulator handle + required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + const: pci17cb,1101 + then: + required: + - vddrfacmn-supply + - vddaon-supply + - vddwlcx-supply + - vddwlmx-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p7-supply + - vddpcie0p9-supply + - vddpcie1p8-supply + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index a2d55bf4c7a5..ff5763dc66a8 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -265,15 +265,6 @@ allOf: examples: - | - - q6v5_wcss: remoteproc@cd00000 { - compatible = "qcom,ipq8074-wcss-pil"; - reg = <0xcd00000 0x4040>, - <0x4ab000 0x20>; - reg-names = "qdsp6", - "rmb"; - }; - wifi0: wifi@c000000 { compatible = "qcom,ipq8074-wifi"; reg = <0xc000000 0x2000000>; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml new file mode 100644 index 000000000000..1b5884015b15 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024 Linaro Limited +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath12k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath12k wireless devices (PCIe) + +maintainers: + - Jeff Johnson <quic_jjohnson@quicinc.com> + - Kalle Valo <kvalo@kernel.org> + +description: + Qualcomm Technologies IEEE 802.11be PCIe devices. + +properties: + compatible: + enum: + - pci17cb,1107 # WCN7850 + + reg: + maxItems: 1 + + vddaon-supply: + description: VDD_AON supply regulator handle + + vddwlcx-supply: + description: VDD_WLCX supply regulator handle + + vddwlmx-supply: + description: VDD_WLMX supply regulator handle + + vddrfacmn-supply: + description: VDD_RFA_CMN supply regulator handle + + vddrfa0p8-supply: + description: VDD_RFA_0P8 supply regulator handle + + vddrfa1p2-supply: + description: VDD_RFA_1P2 supply regulator handle + + vddrfa1p8-supply: + description: VDD_RFA_1P8 supply regulator handle + + vddpcie0p9-supply: + description: VDD_PCIE_0P9 supply regulator handle + + vddpcie1p8-supply: + description: VDD_PCIE_1P8 supply regulator handle + +required: + - compatible + - reg + - vddaon-supply + - vddwlcx-supply + - vddwlmx-supply + - vddrfacmn-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p8-supply + - vddpcie0p9-supply + - vddpcie1p8-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + pcie { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml index 0f781dac6717..eb803ddd13e0 100644 --- a/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml +++ b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml @@ -31,6 +31,10 @@ properties: phy-handle: $ref: ethernet-controller.yaml#/properties/phy-handle + clocks: + items: + - description: 200/375 MHz free-running clock is used as input clock. + required: - compatible - reg @@ -51,5 +55,6 @@ examples: compatible = "xlnx,gmii-to-rgmii-1.0"; reg = <8>; phy-handle = <&phy>; + clocks = <&dummy>; }; }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml index 9801fe6f91b5..99ddc9a4af05 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml @@ -28,6 +28,9 @@ properties: description: phandle to the secure-monitor node $ref: /schemas/types.yaml#/definitions/phandle + power-domains: + maxItems: 1 + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml index e9d9d8df4811..bb37d72c9eaa 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX IC Identification Module (IIM) maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> description: | This binding represents the IC Identification Module (IIM) found on diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index be1314454bec..e21c06e9a741 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX On-Chip OTP Controller (OCOTP) maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> description: | This binding represents the on-chip eFuse OTP controller found on diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index cf5f9e22bb7e..32b8c1eb4e80 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -28,7 +28,9 @@ properties: - enum: - mediatek,mt7622-efuse - mediatek,mt7623-efuse + - mediatek,mt7981-efuse - mediatek,mt7986-efuse + - mediatek,mt7988-efuse - mediatek,mt8173-efuse - mediatek,mt8183-efuse - mediatek,mt8186-efuse diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml index d9287be89877..95121dd6311c 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: On-Chip OTP Memory for Freescale i.MX23/i.MX28 maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> allOf: - $ref: nvmem.yaml# diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml index 3484e0b4b412..bcfbaf5582cc 100644 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml @@ -110,6 +110,12 @@ properties: iommu-map-mask: true msi-parent: true + ats-supported: + description: + Indicates that a PCIe host controller supports ATS, and can handle Memory + Requests with Address Type (AT). + type: boolean + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml index 6fba42156db6..c41608863d6c 100644 --- a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml @@ -13,6 +13,35 @@ description: |+ MediaTek MT7621 PCIe subsys supports a single Root Complex (RC) with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link + MT7621 PCIe HOST Topology + + .-------. + | | + | CPU | + | | + '-------' + | + | + | + v + .------------------. + .-----------| HOST/PCI Bridge |------------. + | '------------------' | Type1 + BUS0 | | | Access + v v v On Bus0 + .-------------. .-------------. .-------------. + | VIRTUAL P2P | | VIRTUAL P2P | | VIRTUAL P2P | + | BUS0 | | BUS0 | | BUS0 | + | DEV0 | | DEV1 | | DEV2 | + '-------------' '-------------' '-------------' + Type0 | Type0 | Type0 | + Access BUS1 | Access BUS2| Access BUS3| + On Bus1 v On Bus2 v On Bus3 v + .----------. .----------. .----------. + | Device 0 | | Device 0 | | Device 0 | + | Func 0 | | Func 0 | | Func 0 | + '----------' '----------' '----------' + allOf: - $ref: /schemas/pci/pci-host-bridge.yaml# diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index 5d7aec5f54e7..612633ba59e2 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -10,21 +10,13 @@ maintainers: - Daire McNamara <daire.mcnamara@microchip.com> allOf: - - $ref: /schemas/pci/pci-host-bridge.yaml# + - $ref: plda,xpressrich3-axi-common.yaml# - $ref: /schemas/interrupt-controller/msi-controller.yaml# properties: compatible: const: microchip,pcie-host-1.0 # PolarFire - reg: - maxItems: 2 - - reg-names: - items: - - const: cfg - - const: apb - clocks: description: Fabric Interface Controllers, FICs, are the interface between the FPGA @@ -52,18 +44,6 @@ properties: items: pattern: '^fic[0-3]$' - interrupts: - minItems: 1 - items: - - description: PCIe host controller - - description: builtin MSI controller - - interrupt-names: - minItems: 1 - items: - - const: pcie - - const: msi - ranges: minItems: 1 maxItems: 3 @@ -72,39 +52,6 @@ properties: minItems: 1 maxItems: 6 - msi-controller: - description: Identifies the node as an MSI controller. - - msi-parent: - description: MSI controller the device is capable of using. - - interrupt-controller: - type: object - properties: - '#address-cells': - const: 0 - - '#interrupt-cells': - const: 1 - - interrupt-controller: true - - required: - - '#address-cells' - - '#interrupt-cells' - - interrupt-controller - - additionalProperties: false - -required: - - reg - - reg-names - - "#interrupt-cells" - - interrupts - - interrupt-map-mask - - interrupt-map - - msi-controller - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml new file mode 100644 index 000000000000..7a57a80052a0 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/plda,xpressrich3-axi-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PLDA XpressRICH PCIe host common properties + +maintainers: + - Daire McNamara <daire.mcnamara@microchip.com> + - Kevin Xie <kevin.xie@starfivetech.com> + +description: + Generic PLDA XpressRICH PCIe host common properties. + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + reg: + maxItems: 2 + + reg-names: + items: + - const: cfg + - const: apb + + interrupts: + minItems: 1 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + items: + - const: pcie + - const: msi + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + interrupt-controller: + type: object + properties: + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - reg + - reg-names + - interrupts + - msi-controller + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index a223ce029cab..46802f7d9482 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -13,6 +13,7 @@ properties: compatible: oneOf: - enum: + - qcom,sa8775p-pcie-ep - qcom,sdx55-pcie-ep - qcom,sm8450-pcie-ep - items: @@ -20,6 +21,7 @@ properties: - const: qcom,sdx55-pcie-ep reg: + minItems: 6 items: - description: Qualcomm-specific PARF configuration registers - description: DesignWare PCIe registers @@ -27,8 +29,10 @@ properties: - description: Address Translation Unit (ATU) registers - description: Memory region used to map remote RC address space - description: BAR memory region + - description: DMA register space reg-names: + minItems: 6 items: - const: parf - const: dbi @@ -36,13 +40,14 @@ properties: - const: atu - const: addr_space - const: mmio + - const: dma clocks: - minItems: 7 + minItems: 5 maxItems: 8 clock-names: - minItems: 7 + minItems: 5 maxItems: 8 qcom,perst-regs: @@ -57,14 +62,18 @@ properties: - description: Perst separation enable offset interrupts: + minItems: 2 items: - description: PCIe Global interrupt - description: PCIe Doorbell interrupt + - description: DMA interrupt interrupt-names: + minItems: 2 items: - const: global - const: doorbell + - const: dma reset-gpios: description: GPIO used as PERST# input signal @@ -125,6 +134,10 @@ allOf: - qcom,sdx55-pcie-ep then: properties: + reg: + maxItems: 6 + reg-names: + maxItems: 6 clocks: items: - description: PCIe Auxiliary clock @@ -143,6 +156,10 @@ allOf: - const: slave_q2a - const: sleep - const: ref + interrupts: + maxItems: 2 + interrupt-names: + maxItems: 2 - if: properties: @@ -152,6 +169,10 @@ allOf: - qcom,sm8450-pcie-ep then: properties: + reg: + maxItems: 6 + reg-names: + maxItems: 6 clocks: items: - description: PCIe Auxiliary clock @@ -172,6 +193,45 @@ allOf: - const: ref - const: ddrss_sf_tbu - const: aggre_noc_axi + interrupts: + maxItems: 2 + interrupt-names: + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-pcie-ep + then: + properties: + reg: + minItems: 7 + maxItems: 7 + reg-names: + minItems: 7 + maxItems: 7 + clocks: + items: + - description: PCIe Auxiliary clock + - description: PCIe CFG AHB clock + - description: PCIe Master AXI clock + - description: PCIe Slave AXI clock + - description: PCIe Slave Q2A AXI clock + clock-names: + items: + - const: aux + - const: cfg + - const: bus_master + - const: bus_slave + - const: slave_q2a + interrupts: + minItems: 3 + maxItems: 3 + interrupt-names: + minItems: 3 + maxItems: 3 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml index 1496d6993ab4..d8c0afaa4b19 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml @@ -69,6 +69,10 @@ properties: - const: msi6 - const: msi7 + operating-points-v2: true + opp-table: + type: object + resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml index 1074310a8e7a..a9db0a231563 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml @@ -19,11 +19,10 @@ properties: const: qcom,pcie-x1e80100 reg: - minItems: 5 + minItems: 6 maxItems: 6 reg-names: - minItems: 5 items: - const: parf # Qualcomm specific registers - const: dbi # DesignWare PCIe registers diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml new file mode 100644 index 000000000000..cc9adfc7611c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare based PCIe RC/EP controller on Rockchip SoCs + +maintainers: + - Shawn Lin <shawn.lin@rock-chips.com> + - Simon Xue <xxm@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: |+ + Generic properties for the DesignWare based PCIe RC/EP controller on Rockchip + SoCs. + +properties: + clocks: + minItems: 5 + items: + - description: AHB clock for PCIe master + - description: AHB clock for PCIe slave + - description: AHB clock for PCIe dbi + - description: APB clock for PCIe + - description: Auxiliary clock for PCIe + - description: PIPE clock + - description: Reference clock for PCIe + + clock-names: + minItems: 5 + items: + - const: aclk_mst + - const: aclk_slv + - const: aclk_dbi + - const: pclk + - const: aux + - const: pipe + - const: ref + + interrupts: + minItems: 5 + items: + - description: + Combined system interrupt, which is used to signal the following + interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme, + hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi, + edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app + - description: + Combined PM interrupt, which is used to signal the following + interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2, + linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2, + linkst_out_l0s, pm_dstate_update + - description: + Combined message interrupt, which is used to signal the following + interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi, + pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active + - description: + Combined legacy interrupt, which is used to signal the following + interrupts - inta, intb, intc, intd, tx_inta, tx_intb, tx_intc, + tx_intd + - description: + Combined error interrupt, which is used to signal the following + interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout, + tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx, + nf_err_rx, f_err_rx, radm_qoverflow + - description: + eDMA write channel 0 interrupt + - description: + eDMA write channel 1 interrupt + - description: + eDMA read channel 0 interrupt + - description: + eDMA read channel 1 interrupt + + interrupt-names: + minItems: 5 + items: + - const: sys + - const: pmc + - const: msg + - const: legacy + - const: err + - const: dma0 + - const: dma1 + - const: dma2 + - const: dma3 + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + power-domains: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - const: pipe + - items: + - const: pwr + - const: pipe + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - num-lanes + - phys + - phy-names + - power-domains + - resets + - reset-names + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-ep.yaml new file mode 100644 index 000000000000..f2d1137aff50 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-ep.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare based PCIe Endpoint controller on Rockchip SoCs + +maintainers: + - Niklas Cassel <cassel@kernel.org> + +description: |+ + RK3588 SoC PCIe Endpoint controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + snps,dw-pcie-ep.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml# + +properties: + compatible: + enum: + - rockchip,rk3568-pcie-ep + - rockchip,rk3588-pcie-ep + + reg: + items: + - description: Data Bus Interface (DBI) registers + - description: Data Bus Interface (DBI) shadow registers + - description: Rockchip designed configuration registers + - description: Memory region used to map remote RC address space + - description: Internal Address Translation Unit (iATU) registers + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: apb + - const: addr_space + - const: atu + +required: + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/rk3588-power.h> + #include <dt-bindings/reset/rockchip,rk3588-cru.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie3x4_ep: pcie-ep@fe150000 { + compatible = "rockchip,rk3588-pcie-ep"; + reg = <0xa 0x40000000 0x0 0x00100000>, + <0xa 0x40100000 0x0 0x00100000>, + <0x0 0xfe150000 0x0 0x00010000>, + <0x9 0x00000000 0x0 0x40000000>, + <0xa 0x40300000 0x0 0x00100000>; + reg-names = "dbi", "dbi2", "apb", "addr_space", "atu"; + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err", + "dma0", "dma1", "dma2", "dma3"; + max-link-speed = <3>; + num-lanes = <4>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; + reset-names = "pwr", "pipe"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index 5f719218c472..550d8a684af3 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: DesignWare based PCIe controller on Rockchip SoCs +title: DesignWare based PCIe Root Complex controller on Rockchip SoCs maintainers: - Shawn Lin <shawn.lin@rock-chips.com> @@ -12,12 +12,13 @@ maintainers: - Heiko Stuebner <heiko@sntech.de> description: |+ - RK3568 SoC PCIe host controller is based on the Synopsys DesignWare + RK3568 SoC PCIe Root Complex controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in snps,dw-pcie.yaml. allOf: - $ref: /schemas/pci/snps,dw-pcie.yaml# + - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml# properties: compatible: @@ -40,61 +41,6 @@ properties: - const: apb - const: config - clocks: - minItems: 5 - items: - - description: AHB clock for PCIe master - - description: AHB clock for PCIe slave - - description: AHB clock for PCIe dbi - - description: APB clock for PCIe - - description: Auxiliary clock for PCIe - - description: PIPE clock - - description: Reference clock for PCIe - - clock-names: - minItems: 5 - items: - - const: aclk_mst - - const: aclk_slv - - const: aclk_dbi - - const: pclk - - const: aux - - const: pipe - - const: ref - - interrupts: - items: - - description: - Combined system interrupt, which is used to signal the following - interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme, - hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi, - edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app - - description: - Combined PM interrupt, which is used to signal the following - interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2, - linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2, - linkst_out_l0s, pm_dstate_update - - description: - Combined message interrupt, which is used to signal the following - interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi, - pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active - - description: - Combined legacy interrupt, which is used to signal the following - interrupts - inta, intb, intc, intd - - description: - Combined error interrupt, which is used to signal the following - interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout, - tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx, - nf_err_rx, f_err_rx, radm_qoverflow - - interrupt-names: - items: - - const: sys - - const: pmc - - const: msg - - const: legacy - - const: err - legacy-interrupt-controller: description: Interrupt controller node for handling legacy PCI interrupts. type: object @@ -119,47 +65,14 @@ properties: msi-map: true - num-lanes: true - - phys: - maxItems: 1 - - phy-names: - const: pcie-phy - - power-domains: - maxItems: 1 - ranges: minItems: 2 maxItems: 3 - resets: - minItems: 1 - maxItems: 2 - - reset-names: - oneOf: - - const: pipe - - items: - - const: pwr - - const: pipe - vpcie3v3-supply: true required: - - compatible - - reg - - reg-names - - clocks - - clock-names - msi-map - - num-lanes - - phys - - phy-names - - power-domains - - resets - - reset-names unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index bbdb01d22848..f474b9e3fc7e 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -100,7 +100,7 @@ properties: for new bindings. oneOf: - description: See native 'elbi/app' CSR region for details. - enum: [ link, appl ] + enum: [ apb, link, appl ] - description: See native 'atu' CSR region for details. enum: [ atu_dma ] allOf: @@ -152,11 +152,20 @@ properties: events basis. const: app - description: + Interrupts triggered when the controller itself (in Endpoint mode) + has sent an Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message to + the upstream device. + pattern: "^tx_int(a|b|c|d)$" + - description: + Combined interrupt signal raised when the controller has sent an + Assert_INT{A,B,C,D} message. See "^tx_int(a|b|c|d)$" for details. + const: legacy + - description: Vendor-specific IRQ names. Consider using the generic names above for new bindings. oneOf: - description: See native "app" IRQ for details - enum: [ intr ] + enum: [ intr, sys, pmc, msg, err ] max-functions: maximum: 32 diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml new file mode 100644 index 000000000000..67151aaa3948 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 PCIe host controller + +maintainers: + - Kevin Xie <kevin.xie@starfivetech.com> + +allOf: + - $ref: plda,xpressrich3-axi-common.yaml# + +properties: + compatible: + const: starfive,jh7110-pcie + + clocks: + items: + - description: NOC bus clock + - description: Transport layer clock + - description: AXI MST0 clock + - description: APB clock + + clock-names: + items: + - const: noc + - const: tl + - const: axi_mst0 + - const: apb + + resets: + items: + - description: AXI MST0 reset + - description: AXI SLAVE0 reset + - description: AXI SLAVE reset + - description: PCIE BRIDGE reset + - description: PCIE CORE reset + - description: PCIE APB reset + + reset-names: + items: + - const: mst0 + - const: slv0 + - const: slv + - const: brg + - const: core + - const: apb + + starfive,stg-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + The phandle to System Register Controller syscon node. + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + phys: + description: + Specified PHY is attached to PCIe controller. + maxItems: 1 + +required: + - clocks + - resets + - starfive,stg-syscon + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@940000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0x40000000 0x0 0x10000000>, + <0x0 0x2b000000 0x0 0x1000000>; + reg-names = "cfg", "apb"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, + <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + interrupt-parent = <&plic>; + interrupts = <56>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>; + msi-controller; + clocks = <&syscrg 86>, + <&stgcrg 10>, + <&stgcrg 8>, + <&stgcrg 9>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg 11>, + <&stgcrg 12>, + <&stgcrg 13>, + <&stgcrg 14>, + <&stgcrg 15>, + <&stgcrg 16>; + perst-gpios = <&gpios 26 GPIO_ACTIVE_LOW>; + phys = <&pciephy0>; + + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index 4770ce02fcc3..989fb0fa2577 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -92,7 +92,7 @@ examples: <0 0 0 3 &pcie_intc_0 2>, <0 0 0 4 &pcie_intc_0 3>; bus-range = <0x00 0xff>; - ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, + ranges = <0x02000000 0x0 0xe0010000 0x0 0xe0010000 0x0 0x10000000>, <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; msi-map = <0x0 &its_gic 0x0 0x10000>; reg = <0x0 0xfca10000 0x0 0x1000>, diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml index 6c96a4204e5d..37e8b98f2cdc 100644 --- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -30,6 +30,9 @@ properties: - items: - const: fsl,imx8dxl-ddr-pmu - const: fsl,imx8-ddr-pmu + - items: + - const: fsl,imx95-ddr-pmu + - const: fsl,imx93-ddr-pmu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml new file mode 100644 index 000000000000..98fcb1b364de --- /dev/null +++ b/Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/airoha,en7581-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha EN7581 PCI-Express PHY + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + +description: + The PCIe PHY supports physical layer functionality for PCIe Gen2/Gen3 port. + +properties: + compatible: + const: airoha,en7581-pcie-phy + + reg: + items: + - description: PCIE analog base address + - description: PCIE lane0 base address + - description: PCIE lane1 base address + - description: PCIE lane0 detection time base address + - description: PCIE lane1 detection time base address + - description: PCIE Rx AEQ base address + + reg-names: + items: + - const: csr-2l + - const: pma0 + - const: pma1 + - const: p0-xr-dtime + - const: p1-xr-dtime + - const: rx-aeq + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - reg-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + phy@11e80000 { + compatible = "airoha,en7581-pcie-phy"; + #phy-cells = <0>; + reg = <0x0 0x1fa5a000 0x0 0xfff>, + <0x0 0x1fa5b000 0x0 0xfff>, + <0x0 0x1fa5c000 0x0 0xfff>, + <0x0 0x1fc10044 0x0 0x4>, + <0x0 0x1fc30044 0x0 0x4>, + <0x0 0x1fc15030 0x0 0x104>; + reg-names = "csr-2l", "pma0", "pma1", + "p0-xr-dtime", "p1-xr-dtime", + "rx-aeq"; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml index 0031fb6a4e76..1a0c436b87a0 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml @@ -41,6 +41,9 @@ properties: Phandle to a regulator that provides power to the PHY. This regulator will be managed during the PHY power on/off sequence. + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml new file mode 100644 index 000000000000..147bbfd2cd5f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,imx8qm-hsio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8QM SoC series High Speed IO(HSIO) SERDES PHY + +maintainers: + - Richard Zhu <hongxing.zhu@nxp.com> + +properties: + compatible: + enum: + - fsl,imx8qm-hsio + - fsl,imx8qxp-hsio + reg: + items: + - description: Base address and length of the PHY block + - description: HSIO control and status registers(CSR) of the PHY + - description: HSIO CSR of the controller bound to the PHY + - description: HSIO CSR for MISC + + reg-names: + items: + - const: reg + - const: phy + - const: ctrl + - const: misc + + "#phy-cells": + const: 3 + description: + The first defines lane index. + The second defines the type of the PHY refer to the include phy.h. + The third defines the controller index, indicated which controller + is bound to the lane. + + clocks: + minItems: 5 + maxItems: 14 + + clock-names: + minItems: 5 + maxItems: 14 + + fsl,hsio-cfg: + description: | + Specifies the use case of the HSIO module in the hardware design. + Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be + confiured as following three use cases. + +---------------------------------------+ + | | i.MX8QM | + |------------------|--------------------| + | | Lane0| Lane1| Lane2| + |------------------|------|------|------| + | pciea-x2-sata | PCIEA| PCIEA| SATA | + |------------------|------|------|------| + | pciea-x2-pcieb | PCIEA| PCIEA| PCIEB| + |------------------|------|------|------| + | pciea-pcieb-sata | PCIEA| PCIEB| SATA | + +---------------------------------------+ + $ref: /schemas/types.yaml#/definitions/string + enum: [ pciea-x2-sata, pciea-x2-pcieb, pciea-pcieb-sata] + default: pciea-pcieb-sata + + fsl,refclk-pad-mode: + description: + Specifies the mode of the refclk pad used. INPUT(PHY refclock is + provided externally via the refclk pad) or OUTPUT(PHY refclock is + derived from SoC internal source and provided on the refclk pad). + This property not exists means unused(PHY refclock is derived from + SoC internal source). + $ref: /schemas/types.yaml#/definitions/string + enum: [ input, output, unused ] + default: unused + + power-domains: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - reg-names + - "#phy-cells" + - clocks + - clock-names + - fsl,hsio-cfg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-hsio + then: + properties: + clock-names: + items: + - const: pclk0 + - const: apb_pclk0 + - const: phy0_crr + - const: ctl0_crr + - const: misc_crr + power-domains: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-hsio + then: + properties: + clock-names: + items: + - const: pclk0 + - const: pclk1 + - const: apb_pclk0 + - const: apb_pclk1 + - const: pclk2 + - const: epcs_tx + - const: epcs_rx + - const: apb_pclk2 + - const: phy0_crr + - const: phy1_crr + - const: ctl0_crr + - const: ctl1_crr + - const: ctl2_crr + - const: misc_crr + power-domains: + minItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-clock.h> + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/phy/phy-imx8-pcie.h> + + phy@5f1a0000 { + compatible = "fsl,imx8qxp-hsio"; + reg = <0x5f1a0000 0x10000>, + <0x5f120000 0x10000>, + <0x5f140000 0x10000>, + <0x5f160000 0x10000>; + reg-names = "reg", "phy", "ctrl", "misc"; + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>, + <&phyx1_lpcg IMX_LPCG_CLK_4>, + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>, + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>, + <&misc_crr5_lpcg IMX_LPCG_CLK_4>; + clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", "misc_crr"; + power-domains = <&pd IMX_SC_R_SERDES_1>; + #phy-cells = <3>; + fsl,hsio-cfg = "pciea-pcieb-sata"; + fsl,refclk-pad-mode = "input"; + }; +... diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml index 9ce7b4c6d208..2ef02aac042a 100644 --- a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml @@ -41,6 +41,12 @@ properties: Phandle to the system controller node $ref: /schemas/types.yaml#/definitions/phandle + swap-dx-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Specifies the ports which will swap the differential-pair (D+/D-), + default is not-swapped. + # Required child nodes: patternProperties: diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml index 634cec5d57ea..58ce2d91d28c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml @@ -19,6 +19,8 @@ properties: - qcom,ipq6018-qmp-pcie-phy - qcom,ipq8074-qmp-gen3-pcie-phy - qcom,ipq8074-qmp-pcie-phy + - qcom,ipq9574-qmp-gen3x1-pcie-phy + - qcom,ipq9574-qmp-gen3x2-pcie-phy reg: items: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 16634f73bdcf..03dbd02cf9e7 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -91,8 +91,7 @@ properties: "#clock-cells": true clock-output-names: - minItems: 1 - maxItems: 2 + maxItems: 1 "#phy-cells": const: 0 @@ -222,14 +221,10 @@ allOf: - qcom,sm8650-qmp-gen4x2-pcie-phy then: properties: - clock-output-names: - minItems: 2 "#clock-cells": const: 1 else: properties: - clock-output-names: - maxItems: 1 "#clock-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index 325585bc881b..0e0b6cae07bc 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -20,8 +20,9 @@ properties: - qcom,ipq8074-qmp-usb3-phy - qcom,ipq9574-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy - - com,qdu1000-qmp-usb3-uni-phy + - qcom,qdu1000-qmp-usb3-uni-phy - qcom,sa8775p-qmp-usb3-uni-phy + - qcom,sc8180x-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,sdm845-qmp-usb3-uni-phy - qcom,sdx55-qmp-usb3-uni-phy @@ -112,6 +113,7 @@ allOf: enum: - qcom,qdu1000-qmp-usb3-uni-phy - qcom,sa8775p-qmp-usb3-uni-phy + - qcom,sc8180x-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-uni-phy @@ -152,6 +154,7 @@ allOf: contains: enum: - qcom,sa8775p-qmp-usb3-uni-phy + - qcom,sc8180x-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy - qcom,x1e80100-qmp-usb3-uni-phy then: diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml index f042d6af1594..e03b516c698c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml @@ -15,6 +15,7 @@ if: contains: enum: - qcom,usb-hs-phy-apq8064 + - qcom,usb-hs-phy-msm8660 - qcom,usb-hs-phy-msm8960 then: properties: @@ -41,6 +42,7 @@ properties: - enum: - qcom,usb-hs-phy-apq8064 - qcom,usb-hs-phy-msm8226 + - qcom,usb-hs-phy-msm8660 - qcom,usb-hs-phy-msm8916 - qcom,usb-hs-phy-msm8960 - qcom,usb-hs-phy-msm8974 diff --git a/Documentation/devicetree/bindings/phy/rockchip,rk3399-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,rk3399-emmc-phy.yaml new file mode 100644 index 000000000000..3e3729b1c799 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip,rk3399-emmc-phy.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,rk3399-emmc-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip EMMC PHY + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3399-emmc-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: emmcclk + + drive-impedance-ohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the drive impedance in Ohm. + enum: [33, 40, 50, 66, 100] + default: 50 + + rockchip,enable-strobe-pulldown: + type: boolean + description: | + Enable internal pull-down for the strobe + line. If not set, pull-down is not used. + + rockchip,output-tapdelay-select: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the phyctrl_otapdlysec register. + default: 0x4 + maximum: 0xf + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@f780 { + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780 0x20>; + clocks = <&sdhci>; + clock-names = "emmcclk"; + drive-impedance-ohm = <50>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt deleted file mode 100644 index 57d28c0d5696..000000000000 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ /dev/null @@ -1,43 +0,0 @@ -Rockchip EMMC PHY ------------------------ - -Required properties: - - compatible: rockchip,rk3399-emmc-phy - - #phy-cells: must be 0 - - reg: PHY register address offset and length in "general - register files" - -Optional properties: - - clock-names: Should contain "emmcclk". Although this is listed as optional - (because most boards can get basic functionality without having - access to it), it is strongly suggested. - See ../clock/clock-bindings.txt for details. - - clocks: Should have a phandle to the card clock exported by the SDHCI driver. - - drive-impedance-ohm: Specifies the drive impedance in Ohm. - Possible values are 33, 40, 50, 66 and 100. - If not set, the default value of 50 will be applied. - - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe - line. If not set, pull-down is not used. - - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register. - If not set, the register defaults to 0x4. - Maximum value 0xf. - -Example: - - -grf: syscon@ff770000 { - compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - -... - - emmcphy: phy@f780 { - compatible = "rockchip,rk3399-emmc-phy"; - reg = <0xf780 0x20>; - clocks = <&sdhci>; - clock-names = "emmcclk"; - drive-impedance-ohm = <50>; - #phy-cells = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml index 452e584d9812..16321cdd4919 100644 --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml @@ -25,6 +25,7 @@ description: | properties: compatible: enum: + - google,gs101-usb31drd-phy - samsung,exynos5250-usbdrd-phy - samsung,exynos5420-usbdrd-phy - samsung,exynos5433-usbdrd-phy @@ -57,7 +58,15 @@ properties: the OF graph bindings specified. reg: - maxItems: 1 + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + items: + - const: phy + - const: pcs + - const: pma samsung,pmu-syscon: $ref: /schemas/types.yaml#/definitions/phandle @@ -72,6 +81,19 @@ properties: description: VBUS Boost 5V power source. + pll-supply: + description: Power supply for the USB PLL. + dvdd-usb20-supply: + description: DVDD power supply for the USB 2.0 phy. + vddh-usb20-supply: + description: VDDh power supply for the USB 2.0 phy. + vdd33-usb20-supply: + description: 3.3V power supply for the USB 2.0 phy. + vdda-usbdp-supply: + description: VDDa power supply for the USB DP phy. + vddh-usbdp-supply: + description: VDDh power supply for the USB DP phy. + required: - compatible - clocks @@ -85,6 +107,40 @@ allOf: properties: compatible: contains: + const: google,gs101-usb31drd-phy + then: + properties: + clocks: + items: + - description: Gate of main PHY clock + - description: Gate of PHY reference clock + - description: Gate of control interface AXI clock + - description: Gate of control interface APB clock + - description: Gate of SCL APB clock + clock-names: + items: + - const: phy + - const: ref + - const: ctrl_aclk + - const: ctrl_pclk + - const: scl_pclk + reg: + minItems: 3 + reg-names: + minItems: 3 + required: + - reg-names + - pll-supply + - dvdd-usb20-supply + - vddh-usb20-supply + - vdd33-usb20-supply + - vdda-usbdp-supply + - vddh-usbdp-supply + + - if: + properties: + compatible: + contains: enum: - samsung,exynos5433-usbdrd-phy - samsung,exynos7-usbdrd-phy @@ -100,7 +156,20 @@ allOf: - const: phy_utmi - const: phy_pipe - const: itp - else: + reg: + maxItems: 1 + reg-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5250-usbdrd-phy + - samsung,exynos5420-usbdrd-phy + - samsung,exynos850-usbdrd-phy + then: properties: clocks: minItems: 2 @@ -109,6 +178,10 @@ allOf: items: - const: phy - const: ref + reg: + maxItems: 1 + reg-names: + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml new file mode 100644 index 000000000000..4a06a2642b4a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Starfive SoC MIPI D-PHY Tx Controller + +maintainers: + - Keith Zhao <keith.zhao@starfivetech.com> + - Shengyang Chen <shengyang.chen@starfivetech.com> + +description: + The Starfive SoC uses the MIPI DSI D-PHY based on M31 IP to transfer + DSI data. + +properties: + compatible: + const: starfive,jh7110-dphy-tx + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: txesc + + resets: + items: + - description: MIPITX_DPHY_SYS reset + + reset-names: + items: + - const: sys + + power-domains: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@295e0000 { + compatible = "starfive,jh7110-dphy-tx"; + reg = <0x295e0000 0x10000>; + clocks = <&voutcrg 14>; + clock-names = "txesc"; + resets = <&syscrg 10>; + reset-names = "sys"; + power-domains = <&aon_syscon 0>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 37c0a74c7c01..23ed9a8b6689 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -35,22 +35,159 @@ additionalProperties: patternProperties: "^function|groups$": - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] + enum: + - ACPI + - ADC0 + - ADC1 + - ADC10 + - ADC11 + - ADC12 + - ADC13 + - ADC14 + - ADC15 + - ADC2 + - ADC3 + - ADC4 + - ADC5 + - ADC6 + - ADC7 + - ADC8 + - ADC9 + - BMCINT + - DDCCLK + - DDCDAT + - EXTRST + - FLACK + - FLBUSY + - FLWP + - GPID + - GPID0 + - GPID2 + - GPID4 + - GPID6 + - GPIE0 + - GPIE2 + - GPIE4 + - GPIE6 + - I2C10 + - I2C11 + - I2C12 + - I2C13 + - I2C14 + - I2C3 + - I2C4 + - I2C5 + - I2C6 + - I2C7 + - I2C8 + - I2C9 + - LPCPD + - LPCPME + - LPCRST + - LPCSMI + - MAC1LINK + - MAC2LINK + - MDIO1 + - MDIO2 + - NCTS1 + - NCTS2 + - NCTS3 + - NCTS4 + - NDCD1 + - NDCD2 + - NDCD3 + - NDCD4 + - NDSR1 + - NDSR2 + - NDSR3 + - NDSR4 + - NDTR1 + - NDTR2 + - NDTR3 + - NDTR4 + - NDTS4 + - NRI1 + - NRI2 + - NRI3 + - NRI4 + - NRTS1 + - NRTS2 + - NRTS3 + - OSCCLK + - PWM0 + - PWM1 + - PWM2 + - PWM3 + - PWM4 + - PWM5 + - PWM6 + - PWM7 + - RGMII1 + - RGMII2 + - RMII1 + - RMII2 + - ROM16 + - ROM8 + - ROMCS1 + - ROMCS2 + - ROMCS3 + - ROMCS4 + - RXD1 + - RXD2 + - RXD3 + - RXD4 + - SALT1 + - SALT2 + - SALT3 + - SALT4 + - SD1 + - SD2 + - SGPMCK + - SGPMI + - SGPMLD + - SGPMO + - SGPSCK + - SGPSI0 + - SGPSI1 + - SGPSLD + - SIOONCTRL + - SIOPBI + - SIOPBO + - SIOPWREQ + - SIOPWRGD + - SIOS3 + - SIOS5 + - SIOSCI + - SPI1 + - SPI1DEBUG + - SPI1PASSTHRU + - SPICS1 + - TIMER3 + - TIMER4 + - TIMER5 + - TIMER6 + - TIMER7 + - TIMER8 + - TXD1 + - TXD2 + - TXD3 + - TXD4 + - UART6 + - USB11D1 + - USB11H2 + - USB2D1 + - USB2H1 + - USBCKI + - VGABIOS_ROM + - VGAHS + - VGAVS + - VPI18 + - VPI24 + - VPI30 + - VPO12 + - VPO24 + - WDTRST1 + - WDTRST2 allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 863da5d80826..35bd0e1eadae 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -35,7 +35,7 @@ properties: description: | A cell of phandles to external controller nodes: 0: compatible with "aspeed,ast2500-gfx", "syscon" - 1: compatible with "aspeed,ast2500-lhc", "syscon" + 1: compatible with "aspeed,ast2500-lpc", "syscon" additionalProperties: $ref: pinmux-node.yaml# @@ -47,24 +47,174 @@ additionalProperties: patternProperties: "^function|groups$": - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] + enum: + - ACPI + - ADC0 + - ADC1 + - ADC10 + - ADC11 + - ADC12 + - ADC13 + - ADC14 + - ADC15 + - ADC2 + - ADC3 + - ADC4 + - ADC5 + - ADC6 + - ADC7 + - ADC8 + - ADC9 + - BMCINT + - DDCCLK + - DDCDAT + - ESPI + - FWSPICS1 + - FWSPICS2 + - GPID0 + - GPID2 + - GPID4 + - GPID6 + - GPIE0 + - GPIE2 + - GPIE4 + - GPIE6 + - I2C10 + - I2C11 + - I2C12 + - I2C13 + - I2C14 + - I2C3 + - I2C4 + - I2C5 + - I2C6 + - I2C7 + - I2C8 + - I2C9 + - LAD0 + - LAD1 + - LAD2 + - LAD3 + - LCLK + - LFRAME + - LPCHC + - LPCPD + - LPCPLUS + - LPCPME + - LPCRST + - LPCSMI + - LSIRQ + - MAC1LINK + - MAC2LINK + - MDIO1 + - MDIO2 + - NCTS1 + - NCTS2 + - NCTS3 + - NCTS4 + - NDCD1 + - NDCD2 + - NDCD3 + - NDCD4 + - NDSR1 + - NDSR2 + - NDSR3 + - NDSR4 + - NDTR1 + - NDTR2 + - NDTR3 + - NDTR4 + - NRI1 + - NRI2 + - NRI3 + - NRI4 + - NRTS1 + - NRTS2 + - NRTS3 + - NRTS4 + - OSCCLK + - PEWAKE + - PNOR + - PWM0 + - PWM1 + - PWM2 + - PWM3 + - PWM4 + - PWM5 + - PWM6 + - PWM7 + - RGMII1 + - RGMII2 + - RMII1 + - RMII2 + - RXD1 + - RXD2 + - RXD3 + - RXD4 + - SALT1 + - SALT10 + - SALT11 + - SALT12 + - SALT13 + - SALT14 + - SALT2 + - SALT3 + - SALT4 + - SALT5 + - SALT6 + - SALT7 + - SALT8 + - SALT9 + - SCL1 + - SCL2 + - SD1 + - SD2 + - SDA1 + - SDA2 + - SGPM + - SGPS1 + - SGPS2 + - SIOONCTRL + - SIOPBI + - SIOPBO + - SIOPWREQ + - SIOPWRGD + - SIOS3 + - SIOS5 + - SIOSCI + - SPI1 + - SPI1CS1 + - SPI1DEBUG + - SPI1PASSTHRU + - SPI2CK + - SPI2CS0 + - SPI2CS1 + - SPI2MISO + - SPI2MOSI + - TIMER3 + - TIMER4 + - TIMER5 + - TIMER6 + - TIMER7 + - TIMER8 + - TXD1 + - TXD2 + - TXD3 + - TXD4 + - UART6 + - USB11BHID + - USB2AD + - USB2AH + - USB2BD + - USB2BH + - USBCKI + - VGABIOSROM + - VGAHS + - VGAVS + - VPI24 + - VPO + - WDTRST1 + - WDTRST2 allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 612464aef98b..80974c46f3ef 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -19,6 +19,11 @@ description: |+ Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml + Note: According to the NCSI specification, the reference clock output pin + (RMIIXRCLKO) is not required on the management controller side. To optimize + pin usage, add "NCSI" pin groups that are equivalent to the RMII pin groups, + but without the RMIIXRCLKO pin. + properties: compatible: const: aspeed,ast2600-pinctrl @@ -29,56 +34,469 @@ additionalProperties: properties: function: - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] + enum: + - ADC0 + - ADC1 + - ADC10 + - ADC11 + - ADC12 + - ADC13 + - ADC14 + - ADC15 + - ADC2 + - ADC3 + - ADC4 + - ADC5 + - ADC6 + - ADC7 + - ADC8 + - ADC9 + - BMCINT + - EMMC + - ESPI + - ESPIALT + - FSI1 + - FSI2 + - FWQSPI + - FWSPIABR + - FWSPID + - FWSPIWP + - GPIT0 + - GPIT1 + - GPIT2 + - GPIT3 + - GPIT4 + - GPIT5 + - GPIT6 + - GPIT7 + - GPIU0 + - GPIU1 + - GPIU2 + - GPIU3 + - GPIU4 + - GPIU5 + - GPIU6 + - GPIU7 + - I2C1 + - I2C10 + - I2C11 + - I2C12 + - I2C13 + - I2C14 + - I2C15 + - I2C16 + - I2C2 + - I2C3 + - I2C4 + - I2C5 + - I2C6 + - I2C7 + - I2C8 + - I2C9 + - I3C1 + - I3C2 + - I3C3 + - I3C4 + - I3C5 + - I3C6 + - JTAGM + - LHPD + - LHSIRQ + - LPC + - LPCHC + - LPCPD + - LPCPME + - LPCSMI + - LSIRQ + - MACLINK1 + - MACLINK2 + - MACLINK3 + - MACLINK4 + - MDIO1 + - MDIO2 + - MDIO3 + - MDIO4 + - NCTS1 + - NCTS2 + - NCTS3 + - NCTS4 + - NDCD1 + - NDCD2 + - NDCD3 + - NDCD4 + - NDSR1 + - NDSR2 + - NDSR3 + - NDSR4 + - NDTR1 + - NDTR2 + - NDTR3 + - NDTR4 + - NRI1 + - NRI2 + - NRI3 + - NRI4 + - NRTS1 + - NRTS2 + - NRTS3 + - NRTS4 + - OSCCLK + - PEWAKE + - PWM0 + - PWM1 + - PWM10 + - PWM11 + - PWM12 + - PWM13 + - PWM14 + - PWM15 + - PWM2 + - PWM3 + - PWM4 + - PWM5 + - PWM6 + - PWM7 + - PWM8 + - PWM9 + - RGMII1 + - RGMII2 + - RGMII3 + - RGMII4 + - RMII1 + - RMII2 + - RMII3 + - RMII4 + - RXD1 + - RXD2 + - RXD3 + - RXD4 + - SALT1 + - SALT10 + - SALT11 + - SALT12 + - SALT13 + - SALT14 + - SALT15 + - SALT16 + - SALT2 + - SALT3 + - SALT4 + - SALT5 + - SALT6 + - SALT7 + - SALT8 + - SALT9 + - SD1 + - SD2 + - SGPM1 + - SGPM2 + - SGPS1 + - SGPS2 + - SIOONCTRL + - SIOPBI + - SIOPBO + - SIOPWREQ + - SIOPWRGD + - SIOS3 + - SIOS5 + - SIOSCI + - SPI1 + - SPI1ABR + - SPI1CS1 + - SPI1WP + - SPI2 + - SPI2CS1 + - SPI2CS2 + - TACH0 + - TACH1 + - TACH10 + - TACH11 + - TACH12 + - TACH13 + - TACH14 + - TACH15 + - TACH2 + - TACH3 + - TACH4 + - TACH5 + - TACH6 + - TACH7 + - TACH8 + - TACH9 + - THRU0 + - THRU1 + - THRU2 + - THRU3 + - TXD1 + - TXD2 + - TXD3 + - TXD4 + - UART10 + - UART11 + - UART12 + - UART13 + - UART6 + - UART7 + - UART8 + - UART9 + - USB11BHID + - USB2AD + - USB2AH + - USB2AHP + - USB2BD + - USB2BH + - USBAD + - USBADP + - VB + - VGAHS + - VGAVS + - WDTRST1 + - WDTRST2 + - WDTRST3 + - WDTRST4 groups: - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, - SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] + enum: + - ADC0 + - ADC1 + - ADC10 + - ADC11 + - ADC12 + - ADC13 + - ADC14 + - ADC15 + - ADC2 + - ADC3 + - ADC4 + - ADC5 + - ADC6 + - ADC7 + - ADC8 + - ADC9 + - BMCINT + - EMMCG1 + - EMMCG4 + - EMMCG8 + - ESPI + - ESPIALT + - FSI1 + - FSI2 + - FWQSPI + - FWSPIABR + - FWSPID + - FWSPIWP + - GPIT0 + - GPIT1 + - GPIT2 + - GPIT3 + - GPIT4 + - GPIT5 + - GPIT6 + - GPIT7 + - GPIU0 + - GPIU1 + - GPIU2 + - GPIU3 + - GPIU4 + - GPIU5 + - GPIU6 + - GPIU7 + - HVI3C3 + - HVI3C4 + - I2C1 + - I2C10 + - I2C11 + - I2C12 + - I2C13 + - I2C14 + - I2C15 + - I2C16 + - I2C2 + - I2C3 + - I2C4 + - I2C5 + - I2C6 + - I2C7 + - I2C8 + - I2C9 + - I3C1 + - I3C2 + - I3C3 + - I3C4 + - I3C5 + - I3C6 + - JTAGM + - LHPD + - LHSIRQ + - LPC + - LPCHC + - LPCPD + - LPCPME + - LPCSMI + - LSIRQ + - MACLINK1 + - MACLINK2 + - MACLINK3 + - MACLINK4 + - MDIO1 + - MDIO2 + - MDIO3 + - MDIO4 + - NCSI3 + - NCSI4 + - NCTS1 + - NCTS2 + - NCTS3 + - NCTS4 + - NDCD1 + - NDCD2 + - NDCD3 + - NDCD4 + - NDSR1 + - NDSR2 + - NDSR3 + - NDSR4 + - NDTR1 + - NDTR2 + - NDTR3 + - NDTR4 + - NRI1 + - NRI2 + - NRI3 + - NRI4 + - NRTS1 + - NRTS2 + - NRTS3 + - NRTS4 + - OSCCLK + - PEWAKE + - PWM0 + - PWM1 + - PWM10G0 + - PWM10G1 + - PWM11G0 + - PWM11G1 + - PWM12G0 + - PWM12G1 + - PWM13G0 + - PWM13G1 + - PWM14G0 + - PWM14G1 + - PWM15G0 + - PWM15G1 + - PWM2 + - PWM3 + - PWM4 + - PWM5 + - PWM6 + - PWM7 + - PWM8G0 + - PWM8G1 + - PWM9G0 + - PWM9G1 + - QSPI1 + - QSPI2 + - RGMII1 + - RGMII2 + - RGMII3 + - RGMII4 + - RMII1 + - RMII2 + - RMII3 + - RMII4 + - RXD1 + - RXD2 + - RXD3 + - RXD4 + - SALT1 + - SALT10G0 + - SALT10G1 + - SALT11G0 + - SALT11G1 + - SALT12G0 + - SALT12G1 + - SALT13G0 + - SALT13G1 + - SALT14G0 + - SALT14G1 + - SALT15G0 + - SALT15G1 + - SALT16G0 + - SALT16G1 + - SALT2 + - SALT3 + - SALT4 + - SALT5 + - SALT6 + - SALT7 + - SALT8 + - SALT9G0 + - SALT9G1 + - SD1 + - SD2 + - SD3 + - SGPM1 + - SGPM2 + - SGPS1 + - SGPS2 + - SIOONCTRL + - SIOPBI + - SIOPBO + - SIOPWREQ + - SIOPWRGD + - SIOS3 + - SIOS5 + - SIOSCI + - SPI1 + - SPI1ABR + - SPI1CS1 + - SPI1WP + - SPI2 + - SPI2CS1 + - SPI2CS2 + - TACH0 + - TACH1 + - TACH10 + - TACH11 + - TACH12 + - TACH13 + - TACH14 + - TACH15 + - TACH2 + - TACH3 + - TACH4 + - TACH5 + - TACH6 + - TACH7 + - TACH8 + - TACH9 + - THRU0 + - THRU1 + - THRU2 + - THRU3 + - TXD1 + - TXD2 + - TXD3 + - TXD4 + - UART10 + - UART11 + - UART12G0 + - UART12G1 + - UART13G0 + - UART13G1 + - UART6 + - UART7 + - UART8 + - UART9 + - USBA + - USBB + - VB + - VGAHS + - VGAVS + - WDTRST1 + - WDTRST2 + - WDTRST3 + - WDTRST4 pins: true bias-disable: true diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml index 2f2405102996..a438db8884f2 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/fsl,imx9-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale IMX93 IOMUX Controller +title: Freescale IMX9 IOMUX Controller maintainers: - Peng Fan <peng.fan@nxp.com> @@ -18,7 +18,9 @@ allOf: properties: compatible: - const: fsl,imx93-iomuxc + enum: + - fsl,imx91-iomuxc + - fsl,imx93-iomuxc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml new file mode 100644 index 000000000000..763a49bd07dc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nuvoton,ma35d1-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 pin control and GPIO + +maintainers: + - Shan-Chun Hung <schung@nuvoton.com> + - Jacky Huang <ychuang3@nuvoton.com> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - nuvoton,ma35d1-pinctrl + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + nuvoton,sys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of the system-management node. + + ranges: true + +patternProperties: + "^gpio@[0-9a-f]+$": + type: object + properties: + gpio-controller: true + + '#gpio-cells': + const: 2 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: + The interrupt outputs to sysirq. + maxItems: 1 + + required: + - gpio-controller + - '#gpio-cells' + - reg + - clocks + - interrupt-controller + - '#interrupt-cells' + - interrupts + + additionalProperties: false + + "-grp$": + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + patternProperties: + "-pins$": + type: object + description: + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + nuvoton,pins: + description: + Each entry consists of 4 parameters and represents the mux and config + setting for one pin. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + items: + items: + - minimum: 0 + maximum: 13 + description: + Pin bank. + - minimum: 0 + maximum: 15 + description: + Pin bank index. + - minimum: 0 + maximum: 15 + description: + Mux 0 means GPIO and mux 1 to 15 means the specific device function. + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + drive-strength-microamp: + oneOf: + - enum: [ 2900, 4400, 5800, 7300, 8600, 10100, 11500, 13000 ] + description: 1.8V I/O driving strength + - enum: [ 17100, 25600, 34100, 42800, 48000, 56000, 77000, 82000 ] + description: 3.3V I/O driving strength + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-schmitt-disable: true + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - nuvoton,sys + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/nuvoton,ma35d1-clk.h> + + pinctrl@40040000 { + compatible = "nuvoton,ma35d1-pinctrl"; + reg = <0x40040000 0xc00>; + #address-cells = <1>; + #size-cells = <1>; + nuvoton,sys = <&sys>; + ranges = <0x0 0x40040000 0x400>; + + gpio@0 { + reg = <0x0 0x40>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPA_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart-grp { + uart11-pins { + nuvoton,pins = <11 0 2>, + <11 1 2>, + <11 2 2>, + <11 3 2>; + power-source = <1>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml index b55d9c316659..814b9598edd1 100644 --- a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml @@ -85,11 +85,12 @@ patternProperties: smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk, - scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1, - spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den, - smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix, - spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4, - hgpio5, hgpio6, hgpio7 ] + scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c, + smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2, + spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio, + wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0, + hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4, + bu4b, bu5, bu5b, bu6, gpo187 ] function: description: @@ -109,11 +110,12 @@ patternProperties: smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk, - scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1, - spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den, - smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix, - spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4, - hgpio5, hgpio6, hgpio7 ] + scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c, + smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2, + spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio, + wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0, + hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4, + bu4b, bu5, bu5b, bu6, gpo187 ] dependencies: groups: [ function ] diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml index c11495524dd2..e02595316c9f 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -75,11 +75,11 @@ properties: description: Optional list of pin base, nr pins & gpio function $ref: /schemas/types.yaml#/definitions/phandle-array items: - - items: - - description: phandle of a gpio-range node - - description: pin base - - description: number of pins - - description: gpio function + items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function '#gpio-range-cells': description: No longer needed, may exist in older files for gpio-ranges @@ -144,6 +144,13 @@ patternProperties: - description: drive strength mask pinctrl-single,input-schmitt: + description: Optional schmitt strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: schmitt strength current + - description: schmitt strength mask + + pinctrl-single,input-schmitt-enable: description: Optional input schmitt configuration $ref: /schemas/types.yaml#/definitions/uint32-array items: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 0bf2d9f093b5..2784d32fdde2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -56,6 +56,7 @@ properties: - qcom,pma8084-gpio - qcom,pmc8180-gpio - qcom,pmc8180c-gpio + - qcom,pmc8380-gpio - qcom,pmd8028-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio @@ -223,6 +224,7 @@ allOf: - qcom,pm8150-gpio - qcom,pm8350-gpio - qcom,pmc8180-gpio + - qcom,pmc8380-gpio - qcom,pmi8994-gpio - qcom,pmm8155au-gpio then: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..9612e21183fa --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM4250 SoC LPASS LPI TLMM + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM4250 SoC. + +properties: + compatible: + const: qcom,sm4250-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Audio voting clock + + clock-names: + items: + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm4250-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm4250-lpass-state" + additionalProperties: false + +$defs: + qcom-sm4250-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-6])$" + + function: + enum: [ gpio, dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, + dmic4_clk, dmic4_data, ext_mclk0_a, ext_mclk0_b, ext_mclk1_a, + ext_mclk1_b, ext_mclk1_c, i2s1_clk, i2s1_data, i2s1_ws, + i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, + qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, slim_clk, slim_data, + swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, swr_wsa_clk, + swr_wsa_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + lpi_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm4250-lpass-lpi-pinctrl"; + reg = <0xa7c0000 0x20000>, + <0xa950000 0x10000>; + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 19>; + + i2s2-active-state { + clk-pins { + pins = "gpio10"; + function = "i2s2_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio12"; + function = "i2s2_data"; + drive-strength = <2>; + slew-rate = <1>; + }; + }; + + i2s2-sleep-clk-state { + pins = "gpio10"; + function = "i2s2_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 4d5a957fa232..56d90c8e1fa3 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -26,6 +26,7 @@ properties: - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} - renesas,r9a08g045-pinctrl # RZ/G3S + - renesas,r9a09g057-pinctrl # RZ/V2H(P) - items: - enum: @@ -66,10 +67,14 @@ properties: maxItems: 1 resets: - items: - - description: GPIO_RSTN signal - - description: GPIO_PORT_RESETN signal - - description: GPIO_SPARE_RESETN signal + oneOf: + - items: + - description: GPIO_RSTN signal + - description: GPIO_PORT_RESETN signal + - description: GPIO_SPARE_RESETN signal + - items: + - description: PFC main reset + - description: Reset for the control register related to WDTUDFCA and WDTUDFFCM pins additionalProperties: anyOf: @@ -79,21 +84,6 @@ additionalProperties: - $ref: pincfg-node.yaml# - $ref: pinmux-node.yaml# - - if: - properties: - compatible: - contains: - enum: - - renesas,r9a08g045-pinctrl - then: - properties: - drive-strength: false - output-impedance-ohms: false - slew-rate: false - else: - properties: - drive-strength-microamp: false - description: Pin controller client devices use pin configuration subnodes (children and grandchildren) for desired pin configuration. @@ -126,6 +116,16 @@ additionalProperties: output-high: true output-low: true line-name: true + bias-disable: true + bias-pull-down: true + bias-pull-up: true + renesas,output-impedance: + description: + Output impedance for pins on the RZ/V2H(P) SoC. The value provided by this + property corresponds to register bit values that can be set in the PFC_IOLH_mn + register, which adjusts the drive strength value and is pin-dependent. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] - type: object additionalProperties: @@ -134,6 +134,20 @@ additionalProperties: allOf: - $ref: pinctrl.yaml# + - if: + properties: + compatible: + contains: + const: renesas,r9a09g057-pinctrl + then: + properties: + resets: + maxItems: 2 + else: + properties: + resets: + minItems: 3 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index f13d315b5d5e..ce66fd15ff9c 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -42,179 +42,187 @@ patternProperties: $ref: pinmux-node.yaml# properties: + pins: + description: + List of pins to select (either this or "groups" must be specified) + items: + pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$' + groups: description: List of groups to select (either this or "pins" must be specified), available groups for this subnode. items: - enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp, - ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp, - gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp, - mdio1_1_grp, mdio2_0_grp, mdio3_0_grp, - qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp, - spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp, - spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp, - spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp, - spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp, - spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp, - spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp, - spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp, - spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp, - spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp, - spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp, - spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp, - spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp, - spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp, - spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp, - spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp, - spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp, - sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, - sdio0_3_grp, sdio0_4_grp, sdio0_5_grp, - sdio0_6_grp, sdio0_7_grp, sdio0_8_grp, - sdio0_9_grp, sdio0_10_grp, sdio0_11_grp, - sdio0_12_grp, sdio0_13_grp, sdio0_14_grp, - sdio0_15_grp, sdio0_16_grp, sdio0_17_grp, - sdio0_18_grp, sdio0_19_grp, sdio0_20_grp, - sdio0_21_grp, sdio0_22_grp, sdio0_23_grp, - sdio0_24_grp, sdio0_25_grp, sdio0_26_grp, - sdio0_27_grp, sdio0_28_grp, sdio0_29_grp, - sdio0_30_grp, sdio0_31_grp, sdio0_32_grp, - sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp, - sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp, - sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp, - sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, - sdio1_3_grp, sdio1_4_grp, sdio1_5_grp, - sdio1_6_grp, sdio1_7_grp, sdio1_8_grp, - sdio1_9_grp, sdio1_10_grp, sdio1_11_grp, - sdio1_12_grp, sdio1_13_grp, sdio1_14_grp, - sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp, - sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp, - sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp, - nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp, - nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp, - can0_1_grp, can0_2_grp, can0_3_grp, - can0_4_grp, can0_5_grp, can0_6_grp, - can0_7_grp, can0_8_grp, can0_9_grp, - can0_10_grp, can0_11_grp, can0_12_grp, - can0_13_grp, can0_14_grp, can0_15_grp, - can0_16_grp, can0_17_grp, can0_18_grp, - can1_0_grp, can1_1_grp, can1_2_grp, - can1_3_grp, can1_4_grp, can1_5_grp, - can1_6_grp, can1_7_grp, can1_8_grp, - can1_9_grp, can1_10_grp, can1_11_grp, - can1_12_grp, can1_13_grp, can1_14_grp, - can1_15_grp, can1_16_grp, can1_17_grp, - can1_18_grp, can1_19_grp, uart0_0_grp, - uart0_1_grp, uart0_2_grp, uart0_3_grp, - uart0_4_grp, uart0_5_grp, uart0_6_grp, - uart0_7_grp, uart0_8_grp, uart0_9_grp, - uart0_10_grp, uart0_11_grp, uart0_12_grp, - uart0_13_grp, uart0_14_grp, uart0_15_grp, - uart0_16_grp, uart0_17_grp, uart0_18_grp, - uart1_0_grp, uart1_1_grp, uart1_2_grp, - uart1_3_grp, uart1_4_grp, uart1_5_grp, - uart1_6_grp, uart1_7_grp, uart1_8_grp, - uart1_9_grp, uart1_10_grp, uart1_11_grp, - uart1_12_grp, uart1_13_grp, uart1_14_grp, - uart1_15_grp, uart1_16_grp, uart1_17_grp, - uart1_18_grp, i2c0_0_grp, i2c0_1_grp, - i2c0_2_grp, i2c0_3_grp, i2c0_4_grp, - i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, - i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, - i2c0_11_grp, i2c0_12_grp, i2c0_13_grp, - i2c0_14_grp, i2c0_15_grp, i2c0_16_grp, - i2c0_17_grp, i2c0_18_grp, i2c1_0_grp, - i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, - i2c1_4_grp, i2c1_5_grp, i2c1_6_grp, - i2c1_7_grp, i2c1_8_grp, i2c1_9_grp, - i2c1_10_grp, i2c1_11_grp, i2c1_12_grp, - i2c1_13_grp, i2c1_14_grp, i2c1_15_grp, - i2c1_16_grp, i2c1_17_grp, i2c1_18_grp, - i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp, - ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp, - ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp, - ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp, - ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp, - ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp, - ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp, - ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp, - ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp, - ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp, - ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp, - ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp, - ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp, - ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp, - ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp, - ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp, - ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp, - ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp, - ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp, - ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp, - ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp, - ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp, - ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp, - ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp, - ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp, - swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp, - swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp, - swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp, - swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp, - swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp, - swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp, - swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp, - swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp, - swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp, - swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp, - swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp, - swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp, - swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp, - swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp, - swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp, - swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp, - swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp, - gpio0_1_grp, gpio0_2_grp, gpio0_3_grp, - gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, - gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, - gpio0_10_grp, gpio0_11_grp, gpio0_12_grp, - gpio0_13_grp, gpio0_14_grp, gpio0_15_grp, - gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, - gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, - gpio0_22_grp, gpio0_23_grp, gpio0_24_grp, - gpio0_25_grp, gpio0_26_grp, gpio0_27_grp, - gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, - gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, - gpio0_34_grp, gpio0_35_grp, gpio0_36_grp, - gpio0_37_grp, gpio0_38_grp, gpio0_39_grp, - gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, - gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, - gpio0_46_grp, gpio0_47_grp, gpio0_48_grp, - gpio0_49_grp, gpio0_50_grp, gpio0_51_grp, - gpio0_52_grp, gpio0_53_grp, gpio0_54_grp, - gpio0_55_grp, gpio0_56_grp, gpio0_57_grp, - gpio0_58_grp, gpio0_59_grp, gpio0_60_grp, - gpio0_61_grp, gpio0_62_grp, gpio0_63_grp, - gpio0_64_grp, gpio0_65_grp, gpio0_66_grp, - gpio0_67_grp, gpio0_68_grp, gpio0_69_grp, - gpio0_70_grp, gpio0_71_grp, gpio0_72_grp, - gpio0_73_grp, gpio0_74_grp, gpio0_75_grp, - gpio0_76_grp, gpio0_77_grp, usb0_0_grp, - usb1_0_grp, pmu0_0_grp, pmu0_1_grp, - pmu0_2_grp, pmu0_3_grp, pmu0_4_grp, - pmu0_5_grp, pmu0_6_grp, pmu0_7_grp, - pmu0_8_grp, pmu0_9_grp, pmu0_10_grp, - pmu0_11_grp, pcie0_0_grp, pcie0_1_grp, - pcie0_2_grp, pcie0_3_grp, pcie0_4_grp, - pcie0_5_grp, pcie0_6_grp, pcie0_7_grp, - csu0_0_grp, csu0_1_grp, csu0_2_grp, - csu0_3_grp, csu0_4_grp, csu0_5_grp, - csu0_6_grp, csu0_7_grp, csu0_8_grp, - csu0_9_grp, csu0_10_grp, csu0_11_grp, - dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp, - dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp, - pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp, - pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp, - trace0_1_grp, trace0_clk_1_grp, trace0_2_grp, - trace0_clk_2_grp, testscan0_0_grp] + anyOf: + - pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$' + - enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp, + ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp, + gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp, + mdio1_1_grp, mdio2_0_grp, mdio3_0_grp, + qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp, + spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp, + spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp, + spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp, + spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp, + spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp, + spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp, + spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp, + spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp, + spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp, + spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp, + spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp, + spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp, + spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp, + spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp, + spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp, + spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp, + sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, + sdio0_3_grp, sdio0_4_grp, sdio0_5_grp, + sdio0_6_grp, sdio0_7_grp, sdio0_8_grp, + sdio0_9_grp, sdio0_10_grp, sdio0_11_grp, + sdio0_12_grp, sdio0_13_grp, sdio0_14_grp, + sdio0_15_grp, sdio0_16_grp, sdio0_17_grp, + sdio0_18_grp, sdio0_19_grp, sdio0_20_grp, + sdio0_21_grp, sdio0_22_grp, sdio0_23_grp, + sdio0_24_grp, sdio0_25_grp, sdio0_26_grp, + sdio0_27_grp, sdio0_28_grp, sdio0_29_grp, + sdio0_30_grp, sdio0_31_grp, sdio0_32_grp, + sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp, + sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp, + sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp, + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, + sdio1_3_grp, sdio1_4_grp, sdio1_5_grp, + sdio1_6_grp, sdio1_7_grp, sdio1_8_grp, + sdio1_9_grp, sdio1_10_grp, sdio1_11_grp, + sdio1_12_grp, sdio1_13_grp, sdio1_14_grp, + sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp, + sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp, + sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp, + nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp, + nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp, + can0_1_grp, can0_2_grp, can0_3_grp, + can0_4_grp, can0_5_grp, can0_6_grp, + can0_7_grp, can0_8_grp, can0_9_grp, + can0_10_grp, can0_11_grp, can0_12_grp, + can0_13_grp, can0_14_grp, can0_15_grp, + can0_16_grp, can0_17_grp, can0_18_grp, + can1_0_grp, can1_1_grp, can1_2_grp, + can1_3_grp, can1_4_grp, can1_5_grp, + can1_6_grp, can1_7_grp, can1_8_grp, + can1_9_grp, can1_10_grp, can1_11_grp, + can1_12_grp, can1_13_grp, can1_14_grp, + can1_15_grp, can1_16_grp, can1_17_grp, + can1_18_grp, can1_19_grp, uart0_0_grp, + uart0_1_grp, uart0_2_grp, uart0_3_grp, + uart0_4_grp, uart0_5_grp, uart0_6_grp, + uart0_7_grp, uart0_8_grp, uart0_9_grp, + uart0_10_grp, uart0_11_grp, uart0_12_grp, + uart0_13_grp, uart0_14_grp, uart0_15_grp, + uart0_16_grp, uart0_17_grp, uart0_18_grp, + uart1_0_grp, uart1_1_grp, uart1_2_grp, + uart1_3_grp, uart1_4_grp, uart1_5_grp, + uart1_6_grp, uart1_7_grp, uart1_8_grp, + uart1_9_grp, uart1_10_grp, uart1_11_grp, + uart1_12_grp, uart1_13_grp, uart1_14_grp, + uart1_15_grp, uart1_16_grp, uart1_17_grp, + uart1_18_grp, i2c0_0_grp, i2c0_1_grp, + i2c0_2_grp, i2c0_3_grp, i2c0_4_grp, + i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, + i2c0_11_grp, i2c0_12_grp, i2c0_13_grp, + i2c0_14_grp, i2c0_15_grp, i2c0_16_grp, + i2c0_17_grp, i2c0_18_grp, i2c1_0_grp, + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, + i2c1_4_grp, i2c1_5_grp, i2c1_6_grp, + i2c1_7_grp, i2c1_8_grp, i2c1_9_grp, + i2c1_10_grp, i2c1_11_grp, i2c1_12_grp, + i2c1_13_grp, i2c1_14_grp, i2c1_15_grp, + i2c1_16_grp, i2c1_17_grp, i2c1_18_grp, + i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp, + ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp, + ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp, + ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp, + ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp, + ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp, + ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp, + ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp, + ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp, + ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp, + ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp, + ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp, + ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp, + ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp, + ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp, + ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp, + ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp, + ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp, + ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp, + ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp, + ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp, + ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp, + ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp, + ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp, + ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp, + swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp, + swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp, + swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp, + swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp, + swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp, + swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp, + swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp, + swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp, + swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp, + swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp, + swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp, + swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp, + swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp, + swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp, + swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp, + swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp, + swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp, + gpio0_1_grp, gpio0_2_grp, gpio0_3_grp, + gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, + gpio0_10_grp, gpio0_11_grp, gpio0_12_grp, + gpio0_13_grp, gpio0_14_grp, gpio0_15_grp, + gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, + gpio0_22_grp, gpio0_23_grp, gpio0_24_grp, + gpio0_25_grp, gpio0_26_grp, gpio0_27_grp, + gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, + gpio0_34_grp, gpio0_35_grp, gpio0_36_grp, + gpio0_37_grp, gpio0_38_grp, gpio0_39_grp, + gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, + gpio0_46_grp, gpio0_47_grp, gpio0_48_grp, + gpio0_49_grp, gpio0_50_grp, gpio0_51_grp, + gpio0_52_grp, gpio0_53_grp, gpio0_54_grp, + gpio0_55_grp, gpio0_56_grp, gpio0_57_grp, + gpio0_58_grp, gpio0_59_grp, gpio0_60_grp, + gpio0_61_grp, gpio0_62_grp, gpio0_63_grp, + gpio0_64_grp, gpio0_65_grp, gpio0_66_grp, + gpio0_67_grp, gpio0_68_grp, gpio0_69_grp, + gpio0_70_grp, gpio0_71_grp, gpio0_72_grp, + gpio0_73_grp, gpio0_74_grp, gpio0_75_grp, + gpio0_76_grp, gpio0_77_grp, usb0_0_grp, + usb1_0_grp, pmu0_0_grp, pmu0_1_grp, + pmu0_2_grp, pmu0_3_grp, pmu0_4_grp, + pmu0_5_grp, pmu0_6_grp, pmu0_7_grp, + pmu0_8_grp, pmu0_9_grp, pmu0_10_grp, + pmu0_11_grp, pcie0_0_grp, pcie0_1_grp, + pcie0_2_grp, pcie0_3_grp, pcie0_4_grp, + pcie0_5_grp, pcie0_6_grp, pcie0_7_grp, + csu0_0_grp, csu0_1_grp, csu0_2_grp, + csu0_3_grp, csu0_4_grp, csu0_5_grp, + csu0_6_grp, csu0_7_grp, csu0_8_grp, + csu0_9_grp, csu0_10_grp, csu0_11_grp, + dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp, + dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp, + pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp, + pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp, + trace0_1_grp, trace0_clk_1_grp, trace0_2_grp, + trace0_clk_2_grp, testscan0_0_grp] maxItems: 78 function: @@ -230,9 +238,12 @@ patternProperties: pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0] required: - - groups - function + oneOf: + - required: [ groups ] + - required: [ pins ] + additionalProperties: false '^conf': diff --git a/Documentation/devicetree/bindings/platform/lenovo,yoga-c630-ec.yaml b/Documentation/devicetree/bindings/platform/lenovo,yoga-c630-ec.yaml new file mode 100644 index 000000000000..3180ce1a22d4 --- /dev/null +++ b/Documentation/devicetree/bindings/platform/lenovo,yoga-c630-ec.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/platform/lenovo,yoga-c630-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lenovo Yoga C630 Embedded Controller. + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + The Qualcomm Snapdragon-based Lenovo Yoga C630 has an Embedded Controller + (EC) which handles things such as battery and USB Type-C. This binding + describes the interface, on an I2C bus, to this EC. + +properties: + compatible: + const: lenovo,yoga-c630-ec + + reg: + const: 0x70 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + +patternProperties: + '^connector@[01]$': + $ref: /schemas/connector/usb-connector.yaml# + + properties: + reg: + maxItems: 1 + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - |+ + #include <dt-bindings/interrupt-controller/irq.h> + i2c1 { + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@70 { + compatible = "lenovo,yoga-c630-ec"; + reg = <0x70>; + + interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "source"; + data-role = "host"; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "source"; + data-role = "host"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml index dab3d92bc273..15d74138baa3 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml @@ -20,6 +20,8 @@ properties: enum: - amlogic,meson-a1-pwrc - amlogic,meson-s4-pwrc + - amlogic,a4-pwrc + - amlogic,a5-pwrc - amlogic,c3-pwrc - amlogic,t7-pwrc diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17201.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17201.yaml new file mode 100644 index 000000000000..fe3dd9bd5585 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17201.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max17201.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX17201 fuel gauge + +maintainers: + - Dimitri Fedrau <dima.fedrau@gmail.com> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - const: maxim,max17201 + - items: + - enum: + - maxim,max17205 + - const: maxim,max17201 + + reg: + items: + - description: ModelGauge m5 registers + - description: Nonvolatile registers + + reg-names: + items: + - const: m5 + - const: nvmem + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@36 { + compatible = "maxim,max17201"; + reg = <0x36>, <0xb>; + reg-names = "m5", "nvmem"; + interrupt-parent = <&gpio0>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml b/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml new file mode 100644 index 000000000000..3bb8615e3e91 --- /dev/null +++ b/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ptp/fsl,ptp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QorIQ 1588 timer based PTP clock + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - fsl,etsec-ptp + - fsl,fman-ptp-timer + - fsl,dpaa2-ptp + - fsl,enetc-ptp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + fsl,cksel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Timer reference clock source. + + Reference clock source is determined by the value, which is holded + in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the + value, which will be directly written in those bits, that is why, + according to reference manual, the next clock sources can be used: + + For eTSEC, + <0> - external high precision timer reference clock (TSEC_TMR_CLK + input is used for this purpose); + <1> - eTSEC system clock; + <2> - eTSEC1 transmit clock; + <3> - RTC clock input. + + For DPAA FMan, + <0> - external high precision timer reference clock (TMR_1588_CLK) + <1> - MAC system clock (1/2 FMan clock) + <2> - reserved + <3> - RTC clock oscillator + + fsl,tclk-period: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Timer reference clock period in nanoseconds. + + fsl,tmr-prsc: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Prescaler, divides the output clock. + + fsl,tmr-add: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Frequency compensation value. + + fsl,tmr-fiper1: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fixed interval period pulse generator. + + fsl,tmr-fiper2: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fixed interval period pulse generator. + + fsl,tmr-fiper3: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Fixed interval period pulse generator. + Supported only on DPAA2 and ENETC hardware. + + fsl,max-adj: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum frequency adjustment in parts per billion. + + These properties set the operational parameters for the PTP + clock. You must choose these carefully for the clock to work right. + Here is how to figure good values: + + TimerOsc = selected reference clock MHz + tclk_period = desired clock period nanoseconds + NominalFreq = 1000 / tclk_period MHz + FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) + tmr_add = ceil(2^32 / FreqDivRatio) + OutputClock = NominalFreq / tmr_prsc MHz + PulseWidth = 1 / OutputClock microseconds + FiperFreq1 = desired frequency in Hz + FiperDiv1 = 1000000 * OutputClock / FiperFreq1 + tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period + max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1 + + The calculation for tmr_fiper2 is the same as for tmr_fiper1. The + driver expects that tmr_fiper1 will be correctly set to produce a 1 + Pulse Per Second (PPS) signal, since this will be offered to the PPS + subsystem to synchronize the Linux clock. + + When this attribute is not used, the IEEE 1588 timer reference clock + will use the eTSEC system clock (for Gianfar) or the MAC system + clock (for DPAA). + + fsl,extts-fifo: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates hardware + support for the external trigger stamp FIFO + + little-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates the 1588 timer + support for the external trigger stamp FIFO. + IP block is little-endian mode. The default endian mode + is big-endian. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + phc@24e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24e00 0xb0>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + fsl,cksel = <1>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <100>; + fsl,tmr-add = <0x999999a4>; + fsl,tmr-fiper1 = <0x3b9ac9f6>; + fsl,tmr-fiper2 = <0x00018696>; + fsl,max-adj = <659999998>; + }; diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt deleted file mode 100644 index 743eda754e65..000000000000 --- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale QorIQ 1588 timer based PTP clock - -General Properties: - - - compatible Should be "fsl,etsec-ptp" for eTSEC - Should be "fsl,fman-ptp-timer" for DPAA FMan - Should be "fsl,dpaa2-ptp" for DPAA2 - Should be "fsl,enetc-ptp" for ENETC - - reg Offset and length of the register set for the device - - interrupts There should be at least two interrupts. Some devices - have as many as four PTP related interrupts. - -Clock Properties: - - - fsl,cksel Timer reference clock source. - - fsl,tclk-period Timer reference clock period in nanoseconds. - - fsl,tmr-prsc Prescaler, divides the output clock. - - fsl,tmr-add Frequency compensation value. - - fsl,tmr-fiper1 Fixed interval period pulse generator. - - fsl,tmr-fiper2 Fixed interval period pulse generator. - - fsl,tmr-fiper3 Fixed interval period pulse generator. - Supported only on DPAA2 and ENETC hardware. - - fsl,max-adj Maximum frequency adjustment in parts per billion. - - fsl,extts-fifo The presence of this property indicates hardware - support for the external trigger stamp FIFO. - - little-endian The presence of this property indicates the 1588 timer - IP block is little-endian mode. The default endian mode - is big-endian. - - These properties set the operational parameters for the PTP - clock. You must choose these carefully for the clock to work right. - Here is how to figure good values: - - TimerOsc = selected reference clock MHz - tclk_period = desired clock period nanoseconds - NominalFreq = 1000 / tclk_period MHz - FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) - tmr_add = ceil(2^32 / FreqDivRatio) - OutputClock = NominalFreq / tmr_prsc MHz - PulseWidth = 1 / OutputClock microseconds - FiperFreq1 = desired frequency in Hz - FiperDiv1 = 1000000 * OutputClock / FiperFreq1 - tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period - max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1 - - The calculation for tmr_fiper2 is the same as for tmr_fiper1. The - driver expects that tmr_fiper1 will be correctly set to produce a 1 - Pulse Per Second (PPS) signal, since this will be offered to the PPS - subsystem to synchronize the Linux clock. - - Reference clock source is determined by the value, which is holded - in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the - value, which will be directly written in those bits, that is why, - according to reference manual, the next clock sources can be used: - - For eTSEC, - <0> - external high precision timer reference clock (TSEC_TMR_CLK - input is used for this purpose); - <1> - eTSEC system clock; - <2> - eTSEC1 transmit clock; - <3> - RTC clock input. - - For DPAA FMan, - <0> - external high precision timer reference clock (TMR_1588_CLK) - <1> - MAC system clock (1/2 FMan clock) - <2> - reserved - <3> - RTC clock oscillator - - When this attribute is not used, the IEEE 1588 timer reference clock - will use the eTSEC system clock (for Gianfar) or the MAC system - clock (for DPAA). - -Example: - - ptp_clock@24e00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <12 0x8 13 0x8>; - interrupt-parent = < &ipic >; - fsl,cksel = <1>; - fsl,tclk-period = <10>; - fsl,tmr-prsc = <100>; - fsl,tmr-add = <0x999999A4>; - fsl,tmr-fiper1 = <0x3B9AC9F6>; - fsl,tmr-fiper2 = <0x00018696>; - fsl,max-adj = <659999998>; - }; diff --git a/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml b/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml new file mode 100644 index 000000000000..ec6115d3796b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/adi,axi-pwmgen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI PWM generator + +maintainers: + - Michael Hennerich <Michael.Hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +description: + The Analog Devices AXI PWM generator can generate PWM signals + with variable pulse width and period. + + https://wiki.analog.com/resources/fpga/docs/axi_pwm_gen + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: adi,axi-pwmgen-2.00.a + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + + clocks: + maxItems: 1 + +required: + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + pwm@44b00000 { + compatible = "adi,axi-pwmgen-2.00.a"; + reg = <0x44b00000 0x1000>; + clocks = <&spi_clk>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml index 96cd6f3c3546..d20ad27657aa 100644 --- a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml @@ -23,7 +23,9 @@ properties: - atmel,sama5d2-pwm - microchip,sam9x60-pwm - items: - - const: microchip,sama7g5-pwm + - enum: + - microchip,sama7d65-pwm + - microchip,sama7g5-pwm - const: atmel,sama5d2-pwm - items: - const: microchip,sam9x7-pwm diff --git a/Documentation/devicetree/bindings/pwm/fsl,vf610-ftm-pwm.yaml b/Documentation/devicetree/bindings/pwm/fsl,vf610-ftm-pwm.yaml new file mode 100644 index 000000000000..7f9f72d95e7a --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/fsl,vf610-ftm-pwm.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/fsl,vf610-ftm-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale FlexTimer Module (FTM) PWM controller + +description: | + The same FTM PWM device can have a different endianness on different SoCs. The + device tree provides a property to describing this so that an operating system + device driver can handle all variants of the device. Refer to the table below + for the endianness of the FTM PWM block as integrated into the existing SoCs: + + SoC | FTM-PWM endianness + --------+------------------- + Vybrid | LE + LS1 | BE + LS2 | LE + + Please see ../regmap/regmap.txt for more detail about how to specify endian + modes in device tree. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - fsl,vf610-ftm-pwm + - fsl,imx8qm-ftm-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ftm_sys + - const: ftm_ext + - const: ftm_fix + - const: ftm_cnt_clk_en + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + Boolean property, required if the FTM PWM registers use a big- + endian rather than little-endian layout. + +required: + - compatible + - reg + - clocks + - clock-names + +allOf: + - $ref: pwm.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/vf610-clock.h> + + pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + reg = <0x40038000 0x1000>; + #pwm-cells = <3>; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + clock-names = "ftm_sys", "ftm_ext", "ftm_fix", "ftm_cnt_clk_en"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_1>; + big-endian; + }; diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml index a84a240a61dc..04148198e34d 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml @@ -68,7 +68,6 @@ required: - reg - clocks - clock-names - - interrupts additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml index 8bef9dfeba9a..ac0a35bf8648 100644 --- a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX TPM PWM controller maintainers: - - Anson Huang <anson.huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> description: | The TPM counter and period counter are shared between multiple diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml index 8f50e23ca8c9..a9d3a41ac5b9 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml @@ -8,7 +8,6 @@ title: Freescale MXS PWM controller maintainers: - Shawn Guo <shawnguo@kernel.org> - - Anson Huang <anson.huang@nxp.com> allOf: - $ref: pwm.yaml# diff --git a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt deleted file mode 100644 index 36532cd5ab25..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt +++ /dev/null @@ -1,55 +0,0 @@ -Freescale FlexTimer Module (FTM) PWM controller - -The same FTM PWM device can have a different endianness on different SoCs. The -device tree provides a property to describing this so that an operating system -device driver can handle all variants of the device. Refer to the table below -for the endianness of the FTM PWM block as integrated into the existing SoCs: - - SoC | FTM-PWM endianness - --------+------------------- - Vybrid | LE - LS1 | BE - LS2 | LE - -Please see ../regmap/regmap.txt for more detail about how to specify endian -modes in device tree. - - -Required properties: -- compatible : should be "fsl,<soc>-ftm-pwm" and one of the following - compatible strings: - - "fsl,vf610-ftm-pwm" for PWM compatible with the one integrated on VF610 - - "fsl,imx8qm-ftm-pwm" for PWM compatible with the one integrated on i.MX8QM -- reg: Physical base address and length of the controller's registers -- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of - the cells format. -- clock-names: Should include the following module clock source entries: - "ftm_sys" (module clock, also can be used as counter clock), - "ftm_ext" (external counter clock), - "ftm_fix" (fixed counter clock), - "ftm_cnt_clk_en" (external and fixed counter clock enable/disable). -- clocks: Must contain a phandle and clock specifier for each entry in - clock-names, please see clock/clock-bindings.txt for details of the property - values. -- pinctrl-names: Must contain a "default" entry. -- pinctrl-NNN: One property must exist for each entry in pinctrl-names. - See pinctrl/pinctrl-bindings.txt for details of the property values. -- big-endian: Boolean property, required if the FTM PWM registers use a big- - endian rather than little-endian layout. - -Example: - -pwm0: pwm@40038000 { - compatible = "fsl,vf610-ftm-pwm"; - reg = <0x40038000 0x1000>; - #pwm-cells = <3>; - clock-names = "ftm_sys", "ftm_ext", - "ftm_fix", "ftm_cnt_clk_en"; - clocks = <&clks VF610_CLK_FTM0>, - <&clks VF610_CLK_FTM0_EXT_SEL>, - <&clks VF610_CLK_FTM0_FIX_SEL>, - <&clks VF610_CLK_FTM0_EXT_FIX_EN>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_1>; - big-endian; -}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-gpio.yaml b/Documentation/devicetree/bindings/pwm/pwm-gpio.yaml new file mode 100644 index 000000000000..1576c193f2ab --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-gpio.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic software PWM for modulating GPIOs + +maintainers: + - Stefan Wahren <wahrenst@gmx.net> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: pwm-gpio + + "#pwm-cells": + const: 3 + description: + See pwm.yaml in this directory for a description of the cells format. + The first cell which represents the PWM instance number must always + be zero. + + gpios: + description: + GPIO to be modulated + maxItems: 1 + +required: + - compatible + - "#pwm-cells" + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + pwm { + #pwm-cells = <3>; + compatible = "pwm-gpio"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml index abd9fa873354..f2206ec3c7c4 100644 --- a/Documentation/devicetree/bindings/pwm/pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -16,8 +16,10 @@ properties: pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$" "#pwm-cells": - description: - Number of cells in a PWM specifier. + description: | + Number of cells in a PWM specifier. Typically the cells represent, in + order: the chip-relative PWM number, the PWM period in nanoseconds and + optionally a number of flags (defined in <dt-bindings/pwm/pwm.h>). required: - "#pwm-cells" diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml new file mode 100644 index 000000000000..704828687970 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6873-dvfsrc-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DVFSRC-controlled Regulators + +description: + The Dynamic Voltage and Frequency Scaling Resource Collector Regulators + are controlled with votes to the DVFSRC hardware. + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +properties: + compatible: + enum: + - mediatek,mt6873-dvfsrc-regulator + - mediatek,mt8183-dvfsrc-regulator + - mediatek,mt8192-dvfsrc-regulator + - mediatek,mt8195-dvfsrc-regulator + + dvfsrc-vcore: + description: DVFSRC-controlled SoC Vcore regulator + $ref: regulator.yaml# + unevaluatedProperties: false + + dvfsrc-vscp: + description: DVFSRC-controlled System Control Processor regulator + $ref: regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + +anyOf: + - required: + - dvfsrc-vcore + - required: + - dvfsrc-vscp + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml index 6317daf76d1f..cd4aa27218a1 100644 --- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml @@ -16,7 +16,11 @@ description: | properties: compatible: - const: mediatek,mt6315-regulator + oneOf: + - items: + - const: mediatek,mt6319-regulator + - const: mediatek,mt6315-regulator + - const: mediatek,mt6315-regulator reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index 849bfa50bdba..f8057bba747a 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -96,7 +96,6 @@ properties: required: - compatible - reg - - interrupts - regulators additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml new file mode 100644 index 000000000000..3aaa9653419a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QCA6390 PMU Regulators + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + The QCA6390 package contains discrete modules for WLAN and Bluetooth. They + are powered by the Power Management Unit (PMU) that takes inputs from the + host and provides LDO outputs. This document describes this module. + +properties: + compatible: + enum: + - qcom,qca6390-pmu + - qcom,wcn7850-pmu + + vdd-supply: + description: VDD supply regulator handle + + vddaon-supply: + description: VDD_AON supply regulator handle + + vdddig-supply: + description: VDD_DIG supply regulator handle + + vddpmu-supply: + description: VDD_PMU supply regulator handle + + vddio1p2-supply: + description: VDD_IO_1P2 supply regulator handle + + vddrfa0p95-supply: + description: VDD_RFA_0P95 supply regulator handle + + vddrfa1p2-supply: + description: VDD_RFA_1P2 supply regulator handle + + vddrfa1p3-supply: + description: VDD_RFA_1P3 supply regulator handle + + vddrfa1p8-supply: + description: VDD_RFA_1P8 supply regulator handle + + vddrfa1p9-supply: + description: VDD_RFA_1P9 supply regulator handle + + vddpcie1p3-supply: + description: VDD_PCIE_1P3 supply regulator handle + + vddpcie1p9-supply: + description: VDD_PCIE_1P9 supply regulator handle + + vddio-supply: + description: VDD_IO supply regulator handle + + wlan-enable-gpios: + maxItems: 1 + description: GPIO line enabling the ATH11K WLAN module supplied by the PMU + + bt-enable-gpios: + maxItems: 1 + description: GPIO line enabling the ATH11K Bluetooth module supplied by the PMU + + clocks: + maxItems: 1 + description: Reference clock handle + + regulators: + type: object + description: + LDO outputs of the PMU + + patternProperties: + "^ldo[0-9]$": + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - regulators + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,qca6390-pmu + then: + required: + - vddaon-supply + - vddpmu-supply + - vddrfa0p95-supply + - vddrfa1p3-supply + - vddrfa1p9-supply + - vddpcie1p3-supply + - vddpcie1p9-supply + - vddio-supply + - if: + properties: + compatible: + contains: + const: qcom,wcn7850-pmu + then: + required: + - vdd-supply + - vddio-supply + - vddaon-supply + - vdddig-supply + - vddrfa1p2-supply + - vddrfa1p8-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + pmu { + compatible = "qcom,qca6390-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; + + vddaon-supply = <&vreg_s6a_0p95>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddrfa0p95-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddpcie1p3-supply = <&vreg_s8c_1p3>; + vddpcie1p9-supply = <&vreg_s5a_1p9>; + vddio-supply = <&vreg_s4a_1p8>; + + wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml index 609c06615bdc..87accc6f13b8 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml @@ -75,6 +75,12 @@ properties: description: regulator description for ldo[1-2]. + properties: + richtek,fixed-microvolt: + description: | + This property can be used to set a fixed operating voltage that lies outside + the range of the regulator's adjustable mode. + required: - compatible - reg @@ -177,6 +183,8 @@ examples: }; }; ldo1 { + /* Fixed LDO VOUT */ + richtek,fixed-microvolt = <1200000>; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -185,7 +193,8 @@ examples: }; }; ldo2 { - regulator-min-microvolt = <3300000>; + /* Adjustable LDO VOUT */ + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-mem { diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml new file mode 100644 index 000000000000..b3d2d7d583ce --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD96801 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: + This module is part of the ROHM BD96801 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + Regulator nodes should be named to buck_<number> and ldo_<number>. + The valid names for BD96801 regulator nodes are + buck1, buck2, buck3, buck4, ldo5, ldo6, ldo7 + +patternProperties: + "^ldo[5-7]$": + type: object + description: + Properties for single LDO regulator. + $ref: regulator.yaml# + + properties: + rohm,initial-voltage-microvolt: + description: + Initial voltage for regulator. Voltage can be tuned +/-150 mV from + this value. NOTE, This can be modified via I2C only when PMIC is in + STBY state. + minimum: 300000 + maximum: 3300000 + + unevaluatedProperties: false + + "^buck[1-4]$": + type: object + description: + Properties for single BUCK regulator. + $ref: regulator.yaml# + + properties: + rohm,initial-voltage-microvolt: + description: + Initial voltage for regulator. Voltage can be tuned +/-150 mV from + this value. NOTE, This can be modified via I2C only when PMIC is in + STBY state. + minimum: 500000 + maximum: 3300000 + + rohm,keep-on-stby: + description: + Keep the regulator powered when PMIC transitions to STBY state. + type: boolean + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt deleted file mode 100644 index 63dc07877cd6..000000000000 --- a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt +++ /dev/null @@ -1,43 +0,0 @@ -Spreadtrum SC2731 Voltage regulators - -The SC2731 integrates low-voltage and low quiescent current DCDC/LDO. -14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have -their own bypass (power-down) control signals. External tantalum or MLCC -ceramic capacitors are recommended to use with these LDOs. - -Required properties: - - compatible: should be "sprd,sc27xx-regulator". - -List of regulators provided by this controller. It is named according to -its regulator type, BUCK_<name> and LDO_<name>. The definition for each -of these nodes is defined using the standard binding for regulators at -Documentation/devicetree/bindings/regulator/regulator.txt. - -The valid names for regulators are: -BUCK: - BUCK_CPU0, BUCK_CPU1, BUCK_RF -LDO: - LDO_CAMA0, LDO_CAMA1, LDO_CAMMOT, LDO_VLDO, LDO_EMMCCORE, LDO_SDCORE, - LDO_SDIO, LDO_WIFIPA, LDO_USB33, LDO_CAMD0, LDO_CAMD1, LDO_CON, - LDO_CAMIO, LDO_SRAM - -Example: - regulators { - compatible = "sprd,sc27xx-regulator"; - - vddarm0: BUCK_CPU0 { - regulator-name = "vddarm0"; - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1996875>; - regulator-ramp-delay = <25000>; - regulator-always-on; - }; - - vddcama0: LDO_CAMA0 { - regulator-name = "vddcama0"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - regulator-enable-ramp-delay = <100>; - }; - ... - }; diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.yaml b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.yaml new file mode 100644 index 000000000000..ffb2924dde36 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/sprd,sc2731-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC2731 Power Management IC regulators + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +description: | + The SC2731 integrates low-voltage and low quiescent current DCDC/LDO. + 14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have + their own bypass (power-down) control signals. It is recommended to use + external tantalum or MLCC ceramic capacitors with these LDOs. + Valid names for the regulators are: + BUCK: + BUCK_CPU0, BUCK_CPU1, BUCK_RF + LDO: + LDO_CAMA0, LDO_CAMA1, LDO_CAMD0, LDO_CAMD1, LDO_CAMIO, LDO_CAMMOT, + LDO_CON, LDO_EMMCCORE, LDO_SDCORE, LDO_SDIO, LDO_SRAM, LDO_USB33, + LDO_VLDO, LDO_WIFIPA + +properties: + compatible: + const: sprd,sc2731-regulator + +patternProperties: + "^BUCK_(CPU[0-1]|RF)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + "^LDO_(CAM(A0|A1|D0|D1|IO|MOT)|CON|EMMCCORE|SD(CORE|IO)|SRAM|USB33|VLDO|WIFIPA)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + regulators { + compatible = "sprd,sc2731-regulator"; + + BUCK_CPU0 { + regulator-name = "vddarm0"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1996875>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + + LDO_CAMA0 { + regulator-name = "vddcama0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml index c9586d277f41..3cb2dad18781 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -11,7 +11,12 @@ maintainers: properties: compatible: - const: st,stm32mp1,pwr-reg + oneOf: + - items: + - const: st,stm32mp1,pwr-reg + - items: + - const: st,stm32mp13-pwr-reg + - const: st,stm32mp1,pwr-reg reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml index 6a6d1a3d6fa7..873d92738eb0 100644 --- a/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml +++ b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml @@ -23,6 +23,8 @@ properties: reg: maxItems: 1 + vin-supply: true + patternProperties: "^out[pn]$": type: object @@ -65,6 +67,7 @@ examples: regulator@3e { compatible = "ti,tps65132"; reg = <0x3e>; + vin-supply = <&supply>; outp { regulator-name = "outp"; diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt deleted file mode 100644 index 549f80436deb..000000000000 --- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt +++ /dev/null @@ -1,80 +0,0 @@ -TWL family of regulators - -Required properties: -For twl6030 regulators/LDOs -- compatible: - - "ti,twl6030-vaux1" for VAUX1 LDO - - "ti,twl6030-vaux2" for VAUX2 LDO - - "ti,twl6030-vaux3" for VAUX3 LDO - - "ti,twl6030-vmmc" for VMMC LDO - - "ti,twl6030-vpp" for VPP LDO - - "ti,twl6030-vusim" for VUSIM LDO - - "ti,twl6030-vana" for VANA LDO - - "ti,twl6030-vcxio" for VCXIO LDO - - "ti,twl6030-vdac" for VDAC LDO - - "ti,twl6030-vusb" for VUSB LDO - - "ti,twl6030-v1v8" for V1V8 LDO - - "ti,twl6030-v2v1" for V2V1 LDO - - "ti,twl6030-vdd1" for VDD1 SMPS - - "ti,twl6030-vdd2" for VDD2 SMPS - - "ti,twl6030-vdd3" for VDD3 SMPS -For twl6032 regulators/LDOs -- compatible: - - "ti,twl6032-ldo1" for LDO1 LDO - - "ti,twl6032-ldo2" for LDO2 LDO - - "ti,twl6032-ldo3" for LDO3 LDO - - "ti,twl6032-ldo4" for LDO4 LDO - - "ti,twl6032-ldo5" for LDO5 LDO - - "ti,twl6032-ldo6" for LDO6 LDO - - "ti,twl6032-ldo7" for LDO7 LDO - - "ti,twl6032-ldoln" for LDOLN LDO - - "ti,twl6032-ldousb" for LDOUSB LDO - - "ti,twl6032-smps3" for SMPS3 SMPS - - "ti,twl6032-smps4" for SMPS4 SMPS - - "ti,twl6032-vio" for VIO SMPS -For twl4030 regulators/LDOs -- compatible: - - "ti,twl4030-vaux1" for VAUX1 LDO - - "ti,twl4030-vaux2" for VAUX2 LDO - - "ti,twl5030-vaux2" for VAUX2 LDO - - "ti,twl4030-vaux3" for VAUX3 LDO - - "ti,twl4030-vaux4" for VAUX4 LDO - - "ti,twl4030-vmmc1" for VMMC1 LDO - - "ti,twl4030-vmmc2" for VMMC2 LDO - - "ti,twl4030-vpll1" for VPLL1 LDO - - "ti,twl4030-vpll2" for VPLL2 LDO - - "ti,twl4030-vsim" for VSIM LDO - - "ti,twl4030-vdac" for VDAC LDO - - "ti,twl4030-vintana2" for VINTANA2 LDO - - "ti,twl4030-vio" for VIO LDO - - "ti,twl4030-vdd1" for VDD1 SMPS - - "ti,twl4030-vdd2" for VDD2 SMPS - - "ti,twl4030-vintana1" for VINTANA1 LDO - - "ti,twl4030-vintdig" for VINTDIG LDO - - "ti,twl4030-vusb1v5" for VUSB1V5 LDO - - "ti,twl4030-vusb1v8" for VUSB1V8 LDO - - "ti,twl4030-vusb3v1" for VUSB3V1 LDO - -Optional properties: -- Any optional property defined in bindings/regulator/regulator.txt -For twl4030 regulators/LDOs: - - regulator-initial-mode: - - 0x08 - Sleep mode, the nominal output voltage is maintained with low power - consumption with low load current capability. - - 0x0e - Active mode, the regulator can deliver its nominal output voltage - with full-load current capability. - -Example: - - xyz: regulator@0 { - compatible = "ti,twl6030-vaux1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - }; - -For twl6030 regulators/LDOs: - - - ti,retain-on-reset: Does not turn off the supplies during warm - reset. Could be needed for VMMC, as TWL6030 - reset sequence for this signal does not comply - with the SD specification. diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml index df36e29d974c..57d75acb0b5e 100644 --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml @@ -59,6 +59,7 @@ properties: maxItems: 32 power-domains: + minItems: 2 maxItems: 8 fsl,auto-boot: @@ -99,6 +100,20 @@ allOf: properties: fsl,iomuxc-gpr: false + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-cm4 + - fsl,imx8qm-cm4 + then: + required: + - power-domains + else: + properties: + power-domains: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml new file mode 100644 index 000000000000..7fe401a06805 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,sa8775p-pas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SA8775p Peripheral Authentication Service + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + Qualcomm SA8775p SoC Peripheral Authentication Service loads and boots firmware + on the Qualcomm DSP Hexagon cores. + +properties: + compatible: + enum: + - qcom,sa8775p-adsp-pas + - qcom,sa8775p-cdsp0-pas + - qcom,sa8775p-cdsp1-pas + - qcom,sa8775p-gpdsp0-pas + - qcom,sa8775p-gpdsp1-pas + + reg: + maxItems: 1 + + clocks: + items: + - description: XO clock + + clock-names: + items: + - const: xo + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM. + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string-array + items: + - description: Firmware name of the Hexagon core + + memory-region: + items: + - description: Memory region for main Firmware authentication + + interrupts: + maxItems: 5 + + interrupt-names: + maxItems: 5 + +required: + - compatible + - reg + - memory-region + +allOf: + - $ref: /schemas/remoteproc/qcom,pas-common.yaml# + + - if: + properties: + compatible: + enum: + - qcom,sa8775p-adsp-pas + then: + properties: + power-domains: + items: + - description: LCX power domain + - description: LMX power domain + power-domain-names: + items: + - const: lcx + - const: lmx + + - if: + properties: + compatible: + enum: + - qcom,sa8775p-cdsp0-pas + - qcom,sa8775p-cdsp1-pas + then: + properties: + power-domains: + items: + - description: CX power domain + - description: MXC power domain + - description: NSP0 power domain + power-domain-names: + items: + - const: cx + - const: mxc + - const: nsp + + - if: + properties: + compatible: + enum: + - qcom,sa8775p-gpdsp0-pas + - qcom,sa8775p-gpdsp1-pas + then: + properties: + power-domains: + items: + - description: CX power domain + - description: MXC power domain + power-domain-names: + items: + - const: cx + - const: mxc + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + remoteproc@30000000 { + compatible = "qcom,sa8775p-adsp-pas"; + reg = <0x30000000 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", "lmx"; + + interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml index 9768db8663eb..b51bb863d759 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -25,9 +25,6 @@ description: | host processor (Arm CorePac) to perform the device management of the remote processor and to communicate with the remote processor. -allOf: - - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# - properties: compatible: enum: @@ -89,41 +86,57 @@ properties: should be defined as per the generic bindings in, Documentation/devicetree/bindings/sram/sram.yaml -if: - properties: - compatible: - enum: - - ti,j721e-c66-dsp -then: - properties: - reg: - items: - - description: Address and Size of the L2 SRAM internal memory region - - description: Address and Size of the L1 PRAM internal memory region - - description: Address and Size of the L1 DRAM internal memory region - reg-names: - items: - - const: l2sram - - const: l1pram - - const: l1dram -else: - if: - properties: - compatible: - enum: - - ti,am62a-c7xv-dsp - - ti,j721e-c71-dsp - - ti,j721s2-c71-dsp - then: - properties: - reg: - items: - - description: Address and Size of the L2 SRAM internal memory region - - description: Address and Size of the L1 DRAM internal memory region - reg-names: - items: - - const: l2sram - - const: l1dram +allOf: + - if: + properties: + compatible: + enum: + - ti,j721e-c66-dsp + then: + properties: + reg: + items: + - description: Address and Size of the L2 SRAM internal memory region + - description: Address and Size of the L1 PRAM internal memory region + - description: Address and Size of the L1 DRAM internal memory region + reg-names: + items: + - const: l2sram + - const: l1pram + - const: l1dram + + - if: + properties: + compatible: + enum: + - ti,j721e-c71-dsp + - ti,j721s2-c71-dsp + then: + properties: + reg: + items: + - description: Address and Size of the L2 SRAM internal memory region + - description: Address and Size of the L1 DRAM internal memory region + reg-names: + items: + - const: l2sram + - const: l1dram + + - if: + properties: + compatible: + enum: + - ti,am62a-c7xv-dsp + then: + properties: + reg: + items: + - description: Address and Size of the L2 SRAM internal memory region + reg-names: + items: + - const: l2sram + + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml index 34c5c1c08ec1..3ce7dcecd87a 100644 --- a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml +++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml @@ -18,6 +18,7 @@ properties: compatible: items: - const: nuvoton,ma35d1-reset + - const: syscon reg: maxItems: 1 @@ -37,7 +38,7 @@ examples: - | system-management@40460000 { - compatible = "nuvoton,ma35d1-reset"; + compatible = "nuvoton,ma35d1-reset", "syscon"; reg = <0x40460000 0x200>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml index 03c18611e42d..b0b20af15313 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml @@ -42,6 +42,12 @@ properties: 0 = Port 1 Phy reset 1 = Port 2 Phy reset + regulator-vbus: + type: object + description: USB VBUS regulator + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + required: - compatible - reg @@ -49,6 +55,7 @@ required: - resets - power-domains - '#reset-cells' + - regulator-vbus additionalProperties: false @@ -64,4 +71,7 @@ examples: resets = <&cpg R9A07G044_USB_PRESETN>; power-domains = <&cpg>; #reset-cells = <1>; + regulator-vbus { + regulator-name = "vbus"; + }; }; diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml index e10eb98eddad..1db08ce9ae27 100644 --- a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml @@ -37,7 +37,7 @@ properties: The second cell should contain the reset mask corresponding to the device used by system controller. - Please see http://processors.wiki.ti.com/index.php/TISCI for + Please see https://software-dl.ti.com/tisci/esd/latest/index.html for protocol documentation for the values to be used for different devices. diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index d87dd50f1a4b..8edc8261241a 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -47,6 +47,7 @@ properties: - sifive,u74 - sifive,u74-mc - thead,c906 + - thead,c908 - thead,c910 - thead,c920 - const: riscv @@ -102,26 +103,7 @@ properties: interrupt-controller: type: object - additionalProperties: false - description: Describes the CPU's local interrupt controller - - properties: - '#interrupt-cells': - const: 1 - - compatible: - oneOf: - - items: - - const: andestech,cpu-intc - - const: riscv,cpu-intc - - const: riscv,cpu-intc - - interrupt-controller: true - - required: - - '#interrupt-cells' - - compatible - - interrupt-controller + $ref: /schemas/interrupt-controller/riscv,cpu-intc.yaml# cpu-idle-states: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml index 468c646247aa..a06dbc6b4928 100644 --- a/Documentation/devicetree/bindings/riscv/extensions.yaml +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -177,6 +177,13 @@ properties: is supported as ratified at commit 5059e0ca641c ("update to ratified") of the riscv-zacas. + - const: zawrs + description: | + The Zawrs extension for entering a low-power state or for trapping + to a hypervisor while waiting on a store to a memory location, as + ratified in commit 98918c844281 ("Merge pull request #1217 from + riscv/zawrs") of riscv-isa-manual. + - const: zba description: | The standard Zba bit-manipulation extension for address generation @@ -220,6 +227,43 @@ properties: instructions as ratified at commit 6d33919 ("Merge pull request #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip. + - const: zca + description: | + The Zca extension part of Zc* standard extensions for code size + reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on + RV64 as it contains no instructions") of riscv-code-size-reduction, + merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed + of zc.adoc to src tree."). + + - const: zcb + description: | + The Zcb extension part of Zc* standard extensions for code size + reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on + RV64 as it contains no instructions") of riscv-code-size-reduction, + merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed + of zc.adoc to src tree."). + + - const: zcd + description: | + The Zcd extension part of Zc* standard extensions for code size + reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on + RV64 as it contains no instructions") of riscv-code-size-reduction, + merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed + of zc.adoc to src tree."). + + - const: zcf + description: | + The Zcf extension part of Zc* standard extensions for code size + reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on + RV64 as it contains no instructions") of riscv-code-size-reduction, + merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed + of zc.adoc to src tree."). + + - const: zcmop + description: + The standard Zcmop extension version 1.0, as ratified in commit + c732a4f39a4 ("Zcmop is ratified/1.0") of the riscv-isa-manual. + - const: zfa description: The standard Zfa extension for additional floating point @@ -363,6 +407,11 @@ properties: ratified in the 20191213 version of the unprivileged ISA specification. + - const: zimop + description: + The standard Zimop extension version 1.0, as ratified in commit + 58220614a5f ("Zimop is ratified/1.0") of the riscv-isa-manual. + - const: ztso description: The standard Ztso extension for total store ordering, as ratified @@ -381,6 +430,36 @@ properties: instructions, as ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + - const: zve32f + description: + The standard Zve32f extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + + - const: zve32x + description: + The standard Zve32x extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + + - const: zve64d + description: + The standard Zve64d extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + + - const: zve64f + description: + The standard Zve64f extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + + - const: zve64x + description: + The standard Zve64x extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + - const: zvfh description: The standard Zvfh extension for vectored half-precision @@ -484,5 +563,58 @@ properties: Registers in the AX45MP datasheet. https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf + allOf: + # Zcb depends on Zca + - if: + contains: + const: zcb + then: + contains: + const: zca + # Zcd depends on Zca and D + - if: + contains: + const: zcd + then: + allOf: + - contains: + const: zca + - contains: + const: d + # Zcf depends on Zca and F + - if: + contains: + const: zcf + then: + allOf: + - contains: + const: zca + - contains: + const: f + # Zcmop depends on Zca + - if: + contains: + const: zcmop + then: + contains: + const: zca + +allOf: + # Zcf extension does not exist on rv64 + - if: + properties: + riscv,isa-extensions: + contains: + const: zcf + riscv,isa-base: + contains: + const: rv64i + then: + properties: + riscv,isa-extensions: + not: + contains: + const: zcf + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml index 4a29c890619a..78ce76ae1b6d 100644 --- a/Documentation/devicetree/bindings/riscv/microchip.yaml +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -29,6 +29,7 @@ properties: - enum: - aldec,tysom-m-mpfs250t-rev2 - aries,m100pfsevp + - beagle,beaglev-fire - microchip,mpfs-sev-kit - sundance,polarberry - const: microchip,mpfs diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml index b672f8521949..4d5c857b3cac 100644 --- a/Documentation/devicetree/bindings/riscv/starfive.yaml +++ b/Documentation/devicetree/bindings/riscv/starfive.yaml @@ -27,6 +27,7 @@ properties: - items: - enum: - milkv,mars + - pine64,star64 - starfive,visionfive-2-v1.2a - starfive,visionfive-2-v1.3b - const: starfive,jh7110 diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml index afa52af442a7..f03b87e1b01c 100644 --- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml @@ -26,6 +26,9 @@ properties: items: - const: core + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml index 765d9f9edd6e..1a71935d8a19 100644 --- a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml +++ b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml @@ -12,14 +12,17 @@ maintainers: properties: compatible: - const: samsung,exynos5250-trng + enum: + - samsung,exynos5250-trng + - samsung,exynos850-trng clocks: - maxItems: 1 + minItems: 1 + maxItems: 2 clock-names: - items: - - const: secss + minItems: 1 + maxItems: 2 reg: maxItems: 1 @@ -30,6 +33,35 @@ required: - clock-names - reg +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos850-trng + + then: + properties: + clocks: + items: + - description: SSS (Security Sub System) operating clock + - description: SSS (Security Sub System) bus clock + + clock-names: + items: + - const: secss + - const: pclk + + else: + properties: + clocks: + items: + - description: SSS (Security Sub System) operating clock + + clock-names: + items: + - const: secss + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/rtc/fsl,ls-ftm-alarm.yaml b/Documentation/devicetree/bindings/rtc/fsl,ls-ftm-alarm.yaml new file mode 100644 index 000000000000..388102ae30cd --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/fsl,ls-ftm-alarm.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/fsl,ls-ftm-alarm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale FlexTimer Module (FTM) Alarm + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - fsl,ls1012a-ftm-alarm + - fsl,ls1021a-ftm-alarm + - fsl,ls1028a-ftm-alarm + - fsl,ls1043a-ftm-alarm + - fsl,ls1046a-ftm-alarm + - fsl,ls1088a-ftm-alarm + - fsl,ls208xa-ftm-alarm + - fsl,lx2160a-ftm-alarm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,rcpm-wakeup: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to rcpm node + - description: bit mask of IPPDEXPCR0 + - description: bit mask of IPPDEXPCR1 + - description: bit mask of IPPDEXPCR2 + - description: bit mask of IPPDEXPCR3 + - description: bit mask of IPPDEXPCR4 + - description: bit mask of IPPDEXPCR5 + - description: bit mask of IPPDEXPCR6 + minItems: 1 + description: + phandle to rcpm node, Please refer + Documentation/devicetree/bindings/soc/fsl/rcpm.txt + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + If the host controller is big-endian mode, specify this property. + The default endian mode is little-endian. + +required: + - compatible + - reg + - interrupts + - fsl,rcpm-wakeup + +allOf: + - $ref: rtc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rtc@2800000 { + compatible = "fsl,ls1088a-ftm-alarm"; + reg = <0x2800000 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt deleted file mode 100644 index fffac74999da..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt +++ /dev/null @@ -1,36 +0,0 @@ -Freescale FlexTimer Module (FTM) Alarm - -Required properties: -- compatible : Should be "fsl,<chip>-ftm-alarm", the - supported chips include - "fsl,ls1012a-ftm-alarm" - "fsl,ls1021a-ftm-alarm" - "fsl,ls1028a-ftm-alarm" - "fsl,ls1043a-ftm-alarm" - "fsl,ls1046a-ftm-alarm" - "fsl,ls1088a-ftm-alarm" - "fsl,ls208xa-ftm-alarm" - "fsl,lx2160a-ftm-alarm" -- reg : Specifies base physical address and size of the register sets for the - FlexTimer Module. -- interrupts : Should be the FlexTimer Module interrupt. -- fsl,rcpm-wakeup property and rcpm node : Please refer - Documentation/devicetree/bindings/soc/fsl/rcpm.txt - -Optional properties: -- big-endian: If the host controller is big-endian mode, specify this property. - The default endian mode is little-endian. - -Example: -rcpm: rcpm@1e34040 { - compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+"; - reg = <0x0 0x1e34040 0x0 0x18>; - #fsl,rcpm-wakeup-cells = <6>; -}; - -ftm_alarm0: timer@2800000 { - compatible = "fsl,ls1088a-ftm-alarm"; - reg = <0x0 0x2800000 0x0 0x10000>; - fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; - interrupts = <0 44 4>; -}; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 4703083d1f11..7a0fab721cf1 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -15,6 +15,7 @@ properties: - st,stm32-rtc - st,stm32h7-rtc - st,stm32mp1-rtc + - st,stm32mp25-rtc reg: maxItems: 1 @@ -90,7 +91,9 @@ allOf: properties: compatible: contains: - const: st,stm32mp1-rtc + enum: + - st,stm32mp1-rtc + - st,stm32mp25-rtc then: properties: diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml index 303d02ca4e1b..ff61ffdcad1d 100644 --- a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml +++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml @@ -37,6 +37,7 @@ properties: - mediatek,mt7623-uart - mediatek,mt7629-uart - mediatek,mt7986-uart + - mediatek,mt7988-uart - mediatek,mt8127-uart - mediatek,mt8135-uart - mediatek,mt8173-uart diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt deleted file mode 100644 index d10cc06c0c37..000000000000 --- a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt +++ /dev/null @@ -1,64 +0,0 @@ -Device tree bindings for Marvell PXA SSP ports - -Required properties: - - - compatible: Must be one of - mrvl,pxa25x-ssp - mvrl,pxa25x-nssp - mrvl,pxa27x-ssp - mrvl,pxa3xx-ssp - mvrl,pxa168-ssp - mrvl,pxa910-ssp - mrvl,ce4100-ssp - - - reg: The memory base - - dmas: Two dma phandles, one for rx, one for tx - - dma-names: Must be "rx", "tx" - - -Example for PXA3xx: - - ssp0: ssp@41000000 { - compatible = "mrvl,pxa3xx-ssp"; - reg = <0x41000000 0x40>; - ssp-id = <1>; - interrupts = <24>; - clock-names = "pxa27x-ssp.0"; - dmas = <&dma 13 - &dma 14>; - dma-names = "rx", "tx"; - }; - - ssp1: ssp@41700000 { - compatible = "mrvl,pxa3xx-ssp"; - reg = <0x41700000 0x40>; - ssp-id = <2>; - interrupts = <16>; - clock-names = "pxa27x-ssp.1"; - dmas = <&dma 15 - &dma 16>; - dma-names = "rx", "tx"; - }; - - ssp2: ssp@41900000 { - compatibl3 = "mrvl,pxa3xx-ssp"; - reg = <0x41900000 0x40>; - ssp-id = <3>; - interrupts = <0>; - clock-names = "pxa27x-ssp.2"; - dmas = <&dma 66 - &dma 67>; - dma-names = "rx", "tx"; - }; - - ssp3: ssp@41a00000 { - compatible = "mrvl,pxa3xx-ssp"; - reg = <0x41a00000 0x40>; - ssp-id = <4>; - interrupts = <13>; - clock-names = "pxa27x-ssp.3"; - dmas = <&dma 2 - &dma 3>; - dma-names = "rx", "tx"; - }; - diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml index 5dec15b7e7c3..88871480018e 100644 --- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml +++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml @@ -28,6 +28,9 @@ properties: clocks: maxItems: 1 + reset-gpios: + maxItems: 1 + clock-frequency: description: When there is no clock provider visible to the platform, this @@ -91,6 +94,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -120,6 +124,7 @@ examples: compatible = "nxp,sc16is752"; reg = <0x54>; clocks = <&clk20m>; + reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */ diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index f3a3eb2831e9..afc7c05898a1 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -9,9 +9,6 @@ title: Renesas Serial Communication Interface with FIFO (SCIF) maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> -allOf: - - $ref: serial.yaml# - properties: compatible: oneOf: @@ -83,6 +80,8 @@ properties: - renesas,scif-r9a08g045 # RZ/G3S - const: renesas,scif-r9a07g044 # RZ/G2{L,LC} fallback + - const: renesas,scif-r9a09g057 # RZ/V2H(P) + reg: maxItems: 1 @@ -95,28 +94,25 @@ properties: - description: Receive buffer full interrupt - description: Transmit buffer empty interrupt - description: Break interrupt - - items: - - description: Error interrupt - - description: Receive buffer full interrupt - - description: Transmit buffer empty interrupt - - description: Break interrupt - description: Data Ready interrupt - description: Transmit End interrupt + - description: Transmit End/Data Ready interrupt + - description: Receive buffer full interrupt (EDGE trigger) + - description: Transmit buffer empty interrupt (EDGE trigger) + minItems: 4 interrupt-names: - oneOf: - - items: - - const: eri - - const: rxi - - const: txi - - const: bri - - items: - - const: eri - - const: rxi - - const: txi - - const: bri - - const: dri - - const: tei + minItems: 4 + items: + - const: eri + - const: rxi + - const: txi + - const: bri + - const: dri + - const: tei + - const: tei-dri + - const: rxi-edge + - const: txi-edge clocks: minItems: 1 @@ -161,18 +157,92 @@ required: - clock-names - power-domains -if: - properties: - compatible: - contains: - enum: - - renesas,rcar-gen2-scif - - renesas,rcar-gen3-scif - - renesas,rcar-gen4-scif - - renesas,scif-r9a07g044 -then: - required: - - resets +allOf: + - $ref: serial.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scif + - renesas,rcar-gen3-scif + - renesas,rcar-gen4-scif + - renesas,scif-r9a07g044 + - renesas,scif-r9a09g057 + then: + required: + - resets + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen1-scif + - renesas,rcar-gen2-scif + - renesas,rcar-gen3-scif + - renesas,rcar-gen4-scif + then: + properties: + interrupts: + maxItems: 1 + + interrupt-names: false + else: + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,scif-r7s72100 + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + + interrupt-names: + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - renesas,scif-r7s9210 + - renesas,scif-r9a07g044 + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + + interrupt-names: + minItems: 6 + maxItems: 6 + + - if: + properties: + compatible: + contains: + const: renesas,scif-r9a09g057 + then: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + interrupts: + minItems: 9 + + interrupt-names: + minItems: 9 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 1001d2a6ace8..4cdb0dcaccf3 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -13,6 +13,20 @@ allOf: - $ref: serial.yaml# - $ref: rs485.yaml# + - if: + properties: + compatible: + contains: + const: starfive,jh7110-uart + then: + properties: + resets: + minItems: 2 + else: + properties: + resets: + maxItems: 1 + properties: compatible: oneOf: @@ -48,6 +62,7 @@ properties: - enum: - starfive,jh7100-hsuart - starfive,jh7100-uart + - starfive,jh7110-uart - const: snps,dw-apb-uart - const: snps,dw-apb-uart @@ -82,7 +97,8 @@ properties: type: boolean resets: - maxItems: 1 + minItems: 1 + maxItems: 2 reg-shift: true diff --git a/Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml b/Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml new file mode 100644 index 000000000000..9c6819241a49 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/via,vt8500-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VIA VT8500 and WonderMedia WM8xxx UART Controller + +maintainers: + - Alexey Charkov <alchark@gmail.com> + +allOf: + - $ref: serial.yaml + +properties: + compatible: + enum: + - via,vt8500-uart # up to WM8850/WM8950 + - wm,wm8880-uart # for WM8880 and later + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + serial@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&clkuart0>; + }; diff --git a/Documentation/devicetree/bindings/serial/vt8500-uart.txt b/Documentation/devicetree/bindings/serial/vt8500-uart.txt deleted file mode 100644 index 2b64e6107fb3..000000000000 --- a/Documentation/devicetree/bindings/serial/vt8500-uart.txt +++ /dev/null @@ -1,27 +0,0 @@ -* VIA VT8500 and WonderMedia WM8xxx UART Controller - -Required properties: -- compatible: should be "via,vt8500-uart" (for VIA/WonderMedia chips up to and - including WM8850/WM8950), or "wm,wm8880-uart" (for WM8880 and later) - -- reg: base physical address of the controller and length of memory mapped - region. - -- interrupts: hardware interrupt number - -- clocks: shall be the input parent clock phandle for the clock. This should - be the 24Mhz reference clock. - -Aliases may be defined to ensure the correct ordering of the uarts. - -Example: - aliases { - serial0 = &uart0; - }; - - uart0: serial@d8200000 { - compatible = "via,vt8500-uart"; - reg = <0xd8200000 0x1040>; - interrupts = <32>; - clocks = <&clkuart0>; - }; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt deleted file mode 100644 index 2a00e14e11e0..000000000000 --- a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt +++ /dev/null @@ -1,56 +0,0 @@ -QorIQ DPAA Buffer Manager Portals Device Tree Binding - -Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. - -CONTENTS - - - BMan Portal - - Example - -BMan Portal Node - -Portals are memory mapped interfaces to BMan that allow low-latency, lock-less -interaction by software running on processor cores, accelerators and network -interfaces with the BMan - -PROPERTIES - -- compatible - Usage: Required - Value type: <stringlist> - Definition: Must include "fsl,bman-portal-<hardware revision>" - May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal" - -- reg - Usage: Required - Value type: <prop-encoded-array> - Definition: Two regions. The first is the cache-enabled region of - the portal. The second is the cache-inhibited region of - the portal - -- interrupts - Usage: Required - Value type: <prop-encoded-array> - Definition: Standard property - -EXAMPLE - -The example below shows a (P4080) BMan portals container/bus node with two portals - - bman-portals@ff4000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0xf 0xf4000000 0x200000>; - - bman-portal@0 { - compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal"; - reg = <0x0 0x4000>, <0x100000 0x1000>; - interrupts = <105 2 0 0>; - }; - bman-portal@4000 { - compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal"; - reg = <0x4000 0x4000>, <0x101000 0x1000>; - interrupts = <107 2 0 0>; - }; - }; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt deleted file mode 100644 index 48eed140765b..000000000000 --- a/Documentation/devicetree/bindings/soc/fsl/bman.txt +++ /dev/null @@ -1,137 +0,0 @@ -QorIQ DPAA Buffer Manager Device Tree Bindings - -Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. - -CONTENTS - - - BMan Node - - BMan Private Memory Node - - Example - -BMan Node - -The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA). -BMan supports hardware allocation and deallocation of buffers belonging to pools -originally created by software with configurable depletion thresholds. This -binding covers the CCSR space programming model - -PROPERTIES - -- compatible - Usage: Required - Value type: <stringlist> - Definition: Must include "fsl,bman" - May include "fsl,<SoC>-bman" - -- reg - Usage: Required - Value type: <prop-encoded-array> - Definition: Registers region within the CCSR address space - -The BMan revision information is located in the BMAN_IP_REV_1/2 registers which -are located at offsets 0xbf8 and 0xbfc - -- interrupts - Usage: Required - Value type: <prop-encoded-array> - Definition: Standard property. The error interrupt - -- fsl,bman-portals - Usage: Required - Value type: <phandle> - Definition: Phandle to this BMan instance's portals - -- fsl,liodn - Usage: See pamu.txt - Value type: <prop-encoded-array> - Definition: PAMU property used for static LIODN assignment - -- fsl,iommu-parent - Usage: See pamu.txt - Value type: <phandle> - Definition: PAMU property used for dynamic LIODN assignment - - For additional details about the PAMU/LIODN binding(s) see pamu.txt - -Devices connected to a BMan instance via Direct Connect Portals (DCP) must link -to the respective BMan instance - -- fsl,bman - Usage: Required - Value type: <prop-encoded-array> - Description: List of phandle and DCP index pairs, to the BMan instance - to which this device is connected via the DCP - -BMan Private Memory Node - -BMan requires a contiguous range of physical memory used for the backing store -for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as -a node under the /reserved-memory node. - -The BMan FBPR memory node must be named "bman-fbpr" - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: PPC platforms: Must include "fsl,bman-fbpr" - ARM platforms: Must include "shared-dma-pool" - as well as the "no-map" property - -The following constraints are relevant to the FBPR private memory: - - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to - 16 GiB - - The alignment must be a muliptle of the memory size - -The size of the FBPR must be chosen by observing the hardware features configured -via the Reset Configuration Word (RCW) and that are relevant to a specific board -(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports, -etc.). The size configured in the DT must reflect the hardware capabilities and -not the specific needs of an application - -For additional details about reserved memory regions see reserved-memory.txt - -EXAMPLE - -The example below shows a BMan FBPR dynamic allocation memory node - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - bman_fbpr: bman-fbpr { - compatible = "shared-mem-pool"; - size = <0 0x1000000>; - alignment = <0 0x1000000>; - no-map; - }; - }; - -The example below shows a (P4080) BMan CCSR-space node - - bportals: bman-portals@ff4000000 { - ... - }; - - crypto@300000 { - ... - fsl,bman = <&bman, 2>; - ... - }; - - bman: bman@31a000 { - compatible = "fsl,bman"; - reg = <0x31a000 0x1000>; - interrupts = <16 2 1 2>; - fsl,liodn = <0x17>; - fsl,bman-portals = <&bportals>; - memory-region = <&bman_fbpr>; - }; - - fman@400000 { - ... - fsl,bman = <&bman, 0>; - ... - }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml new file mode 100644 index 000000000000..53b07d4edc77 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-firmware.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QUICC Engine module Firmware Node + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + This node defines a firmware binary that is embedded in the device tree, for + the purpose of passing the firmware from bootloader to the kernel, or from + the hypervisor to the guest. + + The firmware node itself contains the firmware binary contents, a compatible + property, and any firmware-specific properties. The node should be placed + inside a QE node that needs it. Doing so eliminates the need for a + fsl,firmware-phandle property. Other QE nodes that need the same firmware + should define an fsl,firmware-phandle property that points to the firmware node + in the first QE node. + + The fsl,firmware property can be specified in the DTS (possibly using incbin) + or can be inserted by the boot loader at boot time. + +properties: + compatible: + enum: + - fsl,qe-firmware + + fsl,firmware: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + A standard property. This property contains the firmware binary "blob". + +required: + - compatible + - fsl,firmware + +additionalProperties: false + +examples: + - | + qe-firmware { + compatible = "fsl,qe-firmware"; + fsl,firmware = <0x70 0xcd 0x00 0x00 0x01 0x46 0x45>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml new file mode 100644 index 000000000000..8267ad00727b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QUICC Engine module Interrupt Controller (IC) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,qe-ic + + reg: + maxItems: 1 + + interrupts: + items: + - description: QE interrupt + - description: QE critical + - description: QE error + minItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + interrupt-controller@80 { + compatible = "fsl,qe-ic"; + reg = <0x80 0x80>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <95 2 0 0 94 2 0 0>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml new file mode 100644 index 000000000000..cf0f38dbbe0d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-muram.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QUICC Engine Multi-User RAM (MURAM) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: Multi-User RAM (MURAM) + +properties: + compatible: + items: + - const: fsl,qe-muram + - const: fsl,cpm-muram + + ranges: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [host, slave] + + +patternProperties: + '^data\-only@[a-f0-9]+$': + type: object + properties: + compatible: + items: + - const: fsl,qe-muram-data + - const: fsl,cpm-muram-data + + reg: + maxItems: 1 + + required: + - compatible + - reg + + additionalProperties: false + +required: + - compatible + - ranges + +additionalProperties: false + +examples: + - | + muram@10000 { + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0 0x00010000 0x0000c000>; + #address-cells = <1>; + #size-cells = <1>; + + data-only@0{ + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0 0xc000>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml new file mode 100644 index 000000000000..8e58ab58c063 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-si.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QUICC Engine module Serial Interface Block (SI) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + The SI manages the routing of eight TDM lines to the QE block serial drivers, + the MCC and the UCCs, for receive and transmit. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,ls1043-qe-si + - const: fsl,t1040-qe-si + - enum: + - fsl,t1040-qe-si + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml new file mode 100644 index 000000000000..cc4ed48d786c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-siram.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QUICC Engine module Serial Interface Block RAM(SIRAM) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + store the routing entries of SI + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,ls1043-qe-siram + - const: fsl,t1040-qe-siram + - const: fsl,t1040-qe-siram + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml new file mode 100644 index 000000000000..89cdf5e1d0a8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale QUICC Engine module (QE) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + This represents qe module that is installed on PowerQUICC II Pro. + + NOTE: This is an interim binding; it should be updated to fit + in with the CPM binding later in this document. + + Basically, it is a bus of devices, that could act more or less + as a complete entity (UCC, USB etc ). All of them should be siblings on + the "root" qe node, using the common properties from there. + The description below applies to the qe of MPC8360 and + more nodes and properties would be extended in the future. + +properties: + compatible: + items: + - const: fsl,qe + - const: simple-bus + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + model: + $ref: /schemas/types.yaml#/definitions/string + enum: [QE, CPM, CPM2] + + bus-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the clock frequency for QUICC Engine. + + fsl,qe-num-riscs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: define how many RISC engines the QE has. + + fsl,qe-snums: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 28 + description: + defining the array of serial number (SNUM) values for the virtual + threads. + + fsl,firmware-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + required only if there is no fsl,qe-firmware child node + + Points to a firmware node (see "QE Firmware Node" below) + that contains the firmware that should be uploaded for this QE. + The compatible property for the firmware node should say, + "fsl,qe-firmware". + + brg-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + the internal clock source frequency for baud-rate + generators in Hz. + + fsl,qe-num-snums: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: | + define how many serial number(SNUM) the QE can use + for the threads. Use fsl,qe-snums instead to not only specify the + number of snums, but also their values. + +patternProperties: + '^muram@[a-f0-9]+$': + $ref: fsl,qe-muram.yaml + + '^interrupt-controller@[a-f0-9]+$': + $ref: fsl,qe-ic.yaml + + '^si@[a-f0-9]+$': + $ref: fsl,qe-si.yaml + + '^siram@[a-f0-9]+$': + $ref: fsl,qe-siram.yaml + +required: + - compatible + - reg + - bus-frequency + +allOf: + - $ref: /schemas/simple-bus.yaml# + +unevaluatedProperties: false + +examples: + - | + qe-bus@e0100000 { + compatible = "fsl,qe", "simple-bus"; + reg = <0xe0100000 0x480>; + ranges = <0 0xe0100000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + brg-frequency = <0>; + bus-frequency = <0x179a7b00>; + fsl,qe-snums = /bits/ 8 < + 0x04 0x05 0x0c 0x0d 0x14 0x15 0x1c 0x1d + 0x24 0x25 0x2c 0x2d 0x34 0x35 0x88 0x89 + 0x98 0x99 0xa8 0xa9 0xb8 0xb9 0xc8 0xc9 + 0xd8 0xd9 0xe8 0xe9>; + + interrupt-controller@80 { + compatible = "fsl,qe-ic"; + reg = <0x80 0x80>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <95 2 0 0 94 2 0 0>; + }; + + si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + + siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + + muram@10000 { + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0 0x00010000 0x0000c000>; + #address-cells = <1>; + #size-cells = <1>; + + data-only@0{ + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0 0xc000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt deleted file mode 100644 index 05ec2a838c54..000000000000 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt +++ /dev/null @@ -1,178 +0,0 @@ -* Freescale QUICC Engine module (QE) -This represents qe module that is installed on PowerQUICC II Pro. - -NOTE: This is an interim binding; it should be updated to fit -in with the CPM binding later in this document. - -Basically, it is a bus of devices, that could act more or less -as a complete entity (UCC, USB etc ). All of them should be siblings on -the "root" qe node, using the common properties from there. -The description below applies to the qe of MPC8360 and -more nodes and properties would be extended in the future. - -i) Root QE device - -Required properties: -- compatible : should be "fsl,qe"; -- model : precise model of the QE, Can be "QE", "CPM", or "CPM2" -- reg : offset and length of the device registers. -- bus-frequency : the clock frequency for QUICC Engine. -- fsl,qe-num-riscs: define how many RISC engines the QE has. -- fsl,qe-snums: This property has to be specified as '/bits/ 8' value, - defining the array of serial number (SNUM) values for the virtual - threads. - -Optional properties: -- fsl,firmware-phandle: - Usage: required only if there is no fsl,qe-firmware child node - Value type: <phandle> - Definition: Points to a firmware node (see "QE Firmware Node" below) - that contains the firmware that should be uploaded for this QE. - The compatible property for the firmware node should say, - "fsl,qe-firmware". - -Recommended properties -- brg-frequency : the internal clock source frequency for baud-rate - generators in Hz. - -Deprecated properties -- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use - for the threads. Use fsl,qe-snums instead to not only specify the - number of snums, but also their values. - -Example: - qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - compatible = "fsl,qe"; - ranges = <0 e0100000 00100000>; - reg = <e0100000 480>; - brg-frequency = <0>; - bus-frequency = <179A7B00>; - fsl,qe-snums = /bits/ 8 < - 0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D - 0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89 - 0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9 - 0xD8 0xD9 0xE8 0xE9>; - } - -* Multi-User RAM (MURAM) - -Required properties: -- compatible : should be "fsl,qe-muram", "fsl,cpm-muram". -- mode : the could be "host" or "slave". -- ranges : Should be defined as specified in 1) to describe the - translation of MURAM addresses. -- data-only : sub-node which defines the address area under MURAM - bus that can be allocated as data/parameter - -Example: - - muram@10000 { - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0 00010000 0000c000>; - - data-only@0{ - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0 c000>; - }; - }; - -* Interrupt Controller (IC) - -Required properties: -- compatible : should be "fsl,qe-ic". -- reg : Address range of IC register set. -- interrupts : interrupts generated by the device. -- interrupt-controller : this device is a interrupt controller. - -Example: - - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - interrupts = <95 2 0 0 94 2 0 0>; - }; - -* Serial Interface Block (SI) - -The SI manages the routing of eight TDM lines to the QE block serial drivers -, the MCC and the UCCs, for receive and transmit. - -Required properties: -- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain - "fsl,t1040-qe-si". -- reg : Address range of SI register set. - -Example: - - si1: si@700 { - compatible = "fsl,t1040-qe-si"; - reg = <0x700 0x80>; - }; - -* Serial Interface Block RAM(SIRAM) - -store the routing entries of SI - -Required properties: -- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain - "fsl,t1040-qe-siram". -- reg : Address range of SI RAM. - -Example: - - siram1: siram@1000 { - compatible = "fsl,t1040-qe-siram"; - reg = <0x1000 0x800>; - }; - -* QE Firmware Node - -This node defines a firmware binary that is embedded in the device tree, for -the purpose of passing the firmware from bootloader to the kernel, or from -the hypervisor to the guest. - -The firmware node itself contains the firmware binary contents, a compatible -property, and any firmware-specific properties. The node should be placed -inside a QE node that needs it. Doing so eliminates the need for a -fsl,firmware-phandle property. Other QE nodes that need the same firmware -should define an fsl,firmware-phandle property that points to the firmware node -in the first QE node. - -The fsl,firmware property can be specified in the DTS (possibly using incbin) -or can be inserted by the boot loader at boot time. - -Required properties: - - compatible - Usage: required - Value type: <string> - Definition: A standard property. Specify a string that indicates what - kind of firmware it is. For QE, this should be "fsl,qe-firmware". - - - fsl,firmware - Usage: required - Value type: <prop-encoded-array>, encoded as an array of bytes - Definition: A standard property. This property contains the firmware - binary "blob". - -Example: - qe1@e0080000 { - compatible = "fsl,qe"; - qe_firmware:qe-firmware { - compatible = "fsl,qe-firmware"; - fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...]; - }; - ... - }; - - qe2@e0090000 { - compatible = "fsl,qe"; - fsl,firmware-phandle = <&qe_firmware>; - ... - }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml new file mode 100644 index 000000000000..8dce75bebff9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,bman-portal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QorIQ DPAA Queue Manager Portals + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + QorIQ DPAA Buffer Manager Portal + + Portals are memory mapped interfaces to BMan that allow low-latency, lock-less + interaction by software running on processor cores, accelerators and network + interfaces with the BMan + +properties: + compatible: + oneOf: + - const: fsl,bman-portal + - items: + - enum: + - fsl,bman-portal-1.0.0 + - fsl,ls1043a-bmap-portal + - fsl,ls1046a-bmap-portal + - const: fsl,bman-portal + reg: + items: + - description: the cache-enabled region of the portal + - description: the cache-inhibited region of the portal + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + bman-portal@0 { + compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <105 IRQ_TYPE_EDGE_FALLING 0 0>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml new file mode 100644 index 000000000000..e6f468264b8d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,bman.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QorIQ DPAA Buffer Manager + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA). + BMan supports hardware allocation and deallocation of buffers belonging to + pools originally created by software with configurable depletion thresholds. + This binding covers the CCSR space programming model + +properties: + compatible: + oneOf: + - const: fsl,bman + - items: + - enum: + - fsl,ls1043a-bman + - fsl,ls1046a-bman + - const: fsl,bman + + reg: + items: + - description: | + Registers region within the CCSR address space + + The BMan revision information is located in the BMAN_IP_REV_1/2 + registers which are located at offsets 0xbf8 and 0xbfc + + interrupts: + items: + - description: The error interrupt + + memory-region: + minItems: 1 + maxItems: 2 + description: + List of phandles referencing the BMan private memory + nodes (described below). The bman-fqd node must be + first followed by bman-pfdr node. Only used on ARM + + Devices connected to a BMan instance via Direct Connect Portals (DCP) must link + to the respective BMan instance + + fsl,bman-portals: + $ref: /schemas/types.yaml#/definitions/phandle + description: ref fsl,bman-port.yaml + + fsl,liodn: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + See pamu.txt, PAMU property used for static LIODN assignment + + fsl,iommu-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: + See pamu.txt, PAMU property used for dynamic LIODN assignment + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + bman@31a000 { + compatible = "fsl,bman"; + reg = <0x31a000 0x1000>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 2>; + fsl,liodn = <0x17>; + fsl,bman-portals = <&bportals>; + memory-region = <&bman_fbpr>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml index ce1a6505eb51..3fb0534ea597 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml @@ -8,7 +8,6 @@ title: Freescale Layerscape Device Configuration Unit maintainers: - Shawn Guo <shawnguo@kernel.org> - - Li Yang <leoyang.li@nxp.com> description: | DCFG is the device configuration unit, that provides general purpose diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml index a6a511b00a12..2a456c8af992 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -8,7 +8,6 @@ title: Freescale Layerscape Supplemental Configuration Unit maintainers: - Shawn Guo <shawnguo@kernel.org> - - Li Yang <leoyang.li@nxp.com> description: | SCFG is the supplemental configuration unit, that provides SoC specific diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml new file mode 100644 index 000000000000..31295be91013 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas//soc/fsl/fsl,ls1028a-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Reset Registers Module + +maintainers: + - Frank Li + +description: + Reset Module includes chip reset, service processor control and Reset Control + Word (RCW) status. + +properties: + $nodename: + pattern: "^syscon@[0-9a-f]+$" + + compatible: + items: + - enum: + - fsl,ls1028a-reset + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + little-endian: true + + reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - reboot + +additionalProperties: false + +examples: + - | + syscon@1e60000 { + compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd"; + reg = <0x1e60000 0x10000>; + little-endian; + + reboot { + compatible = "syscon-reboot"; + offset = <0>; + mask = <0x02>; + }; + }; + diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml new file mode 100644 index 000000000000..de0b4ae740ff --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-fqd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QMan Private Memory Nodes + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + QMan requires two contiguous range of physical memory used for the backing store + for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). + This memory is reserved/allocated as a node under the /reserved-memory node. + + BMan requires a contiguous range of physical memory used for the backing store + for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as + a node under the /reserved-memory node. + + The QMan FQD memory node must be named "qman-fqd" + The QMan PFDR memory node must be named "qman-pfdr" + The BMan FBPR memory node must be named "bman-fbpr" + + The following constraints are relevant to the FQD and PFDR private memory: + - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to + 1 GiB + - The alignment must be a muliptle of the memory size + + The size of the FQD and PFDP must be chosen by observing the hardware features + configured via the Reset Configuration Word (RCW) and that are relevant to a + specific board (e.g. number of MAC(s) pinned-out, number of offline/host command + FMan ports, etc.). The size configured in the DT must reflect the hardware + capabilities and not the specific needs of an application + + For additional details about reserved memory regions see + reserved-memory/reserved-memory.yaml in dtschema project. + +properties: + $nodename: + pattern: '^(qman-fqd|qman-pfdr|bman-fbpr)+$' + + compatible: + enum: + - fsl,qman-fqd + - fsl,qman-pfdr + - fsl,bman-fbpr + +required: + - compatible + +allOf: + - $ref: reserved-memory.yaml + +unevaluatedProperties: false + +examples: + - | + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x400000>; + alignment = <0 0x400000>; + no-map; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml new file mode 100644 index 000000000000..17016184143f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-portal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QorIQ DPAA Queue Manager Portals + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + Portals are memory mapped interfaces to QMan that allow low-latency, lock-less + interaction by software running on processor cores, accelerators and network + interfaces with the QMan + +properties: + compatible: + oneOf: + - const: fsl,qman-portal + - items: + - enum: + - fsl,ls1043-qman-portal + - fsl,ls1046-qman-portal + - fsl,qman-portal-1.2.0 + - const: fsl,qman-portal + + reg: + items: + - description: the cache-enabled region of the portal + - description: the cache-inhibited region of the portal + + interrupts: + maxItems: 1 + + fsl,liodn: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: See pamu.txt. Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN + (FLIODN) + + fsl,iommu-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: See pamu.txt. + + fsl,qman-channel-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: qman channel id. + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The hardware index of the channel. This can also be + determined by dividing any of the channel's 8 work queue + IDs by 8 + + In addition to these properties the qman-portals should have sub-nodes to + represent the HW devices/portals that are connected to the software portal + described here + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +patternProperties: + '^(fman0|fman1|pme|crypto)+$': + type: object + properties: + fsl,liodn: + description: See pamu.txt, PAMU property used for static LIODN assignment + + fsl,iommu-parent: + description: See pamu.txt, PAMU property used for dynamic LIODN assignment + + dev-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle to the particular hardware device that this + portal is connected to. + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + qman-portal@0 { + compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; + reg = <0 0x4000>, <0x100000 0x1000>; + interrupts = <104 IRQ_TYPE_EDGE_FALLING 0 0>; + fsl,liodn = <1 2>; + fsl,qman-channel-id = <0>; + + fman0 { + fsl,liodn = <0x21>; + dev-handle = <&fman0>; + }; + + fman1 { + fsl,liodn = <0xa1>; + dev-handle = <&fman1>; + }; + + crypto { + fsl,liodn = <0x41 0x66>; + dev-handle = <&crypto>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml new file mode 100644 index 000000000000..501f06e190c4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,qman.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QorIQ DPAA Queue Manager + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan + supports queuing and QoS scheduling of frames to CPUs, network interfaces and + DPAA logic modules, maintains packet ordering within flows. Besides providing + flow-level queuing, is also responsible for congestion management functions such + as RED/WRED, congestion notifications and tail discards. This binding covers the + CCSR space programming model + +properties: + compatible: + oneOf: + - const: fsl,qman + - items: + - enum: + - fsl,ls1043a-qman + - fsl,ls1046a-qman + - const: fsl,qman + reg: + items: + - description: | + Registers region within the CCSR address space + + The QMan revision information is located in the QMAN_IP_REV_1/2 + registers which are located at offsets 0xbf8 and 0xbfc + + interrupts: + items: + - description: The error interrupt + + fsl,qman-portals: + $ref: /schemas/types.yaml#/definitions/phandle + description: ref fsl,qman-port.yaml + + fsl,liodn: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + See pamu.txt, PAMU property used for static LIODN assignment + + fsl,iommu-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: + See pamu.txt, PAMU property used for dynamic LIODN assignment + + clocks: + maxItems: 1 + description: + Reference input clock. Its frequency is half of the platform clock + + memory-region: + maxItems: 2 + description: + List of phandles referencing the QMan private memory nodes (described + below). The qman-fqd node must be first followed by qman-pfdr node. + Only used on ARM Devices connected to a QMan instance via Direct Connect + Portals (DCP) must link to the respective QMan instance. + + fsl,qman: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + List of phandle and DCP index pairs, to the QMan instance + to which this device is connected via the DCP + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + qman: qman@318000 { + compatible = "fsl,qman"; + reg = <0x318000 0x1000>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 3>; + fsl,liodn = <0x16>; + fsl,qman-portals = <&qportals>; + memory-region = <&qman_fqd &qman_pfdr>; + clocks = <&platform_pll 1>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt deleted file mode 100644 index 5a34f3ab7bea..000000000000 --- a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt +++ /dev/null @@ -1,134 +0,0 @@ -QorIQ DPAA Queue Manager Portals Device Tree Binding - -Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. - -CONTENTS - - - QMan Portal - - Example - -QMan Portal Node - -Portals are memory mapped interfaces to QMan that allow low-latency, lock-less -interaction by software running on processor cores, accelerators and network -interfaces with the QMan - -PROPERTIES - -- compatible - Usage: Required - Value type: <stringlist> - Definition: Must include "fsl,qman-portal-<hardware revision>" - May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal" - -- reg - Usage: Required - Value type: <prop-encoded-array> - Definition: Two regions. The first is the cache-enabled region of - the portal. The second is the cache-inhibited region of - the portal - -- interrupts - Usage: Required - Value type: <prop-encoded-array> - Definition: Standard property - -- fsl,liodn - Usage: See pamu.txt - Value type: <prop-encoded-array> - Definition: Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN - (FLIODN) - -- fsl,iommu-parent - Usage: See pamu.txt - Value type: <phandle> - Definition: PAMU property used for dynamic LIODN assignment - - For additional details about the PAMU/LIODN binding(s) see pamu.txt - -- cell-index - Usage: Required - Value type: <u32> - Definition: The hardware index of the channel. This can also be - determined by dividing any of the channel's 8 work queue - IDs by 8 - -In addition to these properties the qman-portals should have sub-nodes to -represent the HW devices/portals that are connected to the software portal -described here - -The currently supported sub-nodes are: - * fman0 - * fman1 - * pme - * crypto - -These subnodes should have the following properties: - -- fsl,liodn - Usage: See pamu.txt - Value type: <prop-encoded-array> - Definition: PAMU property used for static LIODN assignment - -- fsl,iommu-parent - Usage: See pamu.txt - Value type: <phandle> - Definition: PAMU property used for dynamic LIODN assignment - -- dev-handle - Usage: Required - Value type: <phandle> - Definition: The phandle to the particular hardware device that this - portal is connected to. - -EXAMPLE - -The example below shows a (P4080) QMan portals container/bus node with two portals - - qman-portals@ff4200000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0xf 0xf4200000 0x200000>; - - qman-portal@0 { - compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; - reg = <0 0x4000>, <0x100000 0x1000>; - interrupts = <104 2 0 0>; - fsl,liodn = <1 2>; - fsl,qman-channel-id = <0>; - - fman0 { - fsl,liodn = <0x21>; - dev-handle = <&fman0>; - }; - fman1 { - fsl,liodn = <0xa1>; - dev-handle = <&fman1>; - }; - crypto { - fsl,liodn = <0x41 0x66>; - dev-handle = <&crypto>; - }; - }; - qman-portal@4000 { - compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; - reg = <0x4000 0x4000>, <0x101000 0x1000>; - interrupts = <106 2 0 0>; - fsl,liodn = <3 4>; - cell-index = <1>; - - fman0 { - fsl,liodn = <0x22>; - dev-handle = <&fman0>; - }; - fman1 { - fsl,liodn = <0xa2>; - dev-handle = <&fman1>; - }; - crypto { - fsl,liodn = <0x42 0x67>; - dev-handle = <&crypto>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt deleted file mode 100644 index ee96afd2af72..000000000000 --- a/Documentation/devicetree/bindings/soc/fsl/qman.txt +++ /dev/null @@ -1,187 +0,0 @@ -QorIQ DPAA Queue Manager Device Tree Binding - -Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. - -CONTENTS - - - QMan Node - - QMan Private Memory Nodes - - Example - -QMan Node - -The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan -supports queuing and QoS scheduling of frames to CPUs, network interfaces and -DPAA logic modules, maintains packet ordering within flows. Besides providing -flow-level queuing, is also responsible for congestion management functions such -as RED/WRED, congestion notifications and tail discards. This binding covers the -CCSR space programming model - -PROPERTIES - -- compatible - Usage: Required - Value type: <stringlist> - Definition: Must include "fsl,qman" - May include "fsl,<SoC>-qman" - -- reg - Usage: Required - Value type: <prop-encoded-array> - Definition: Registers region within the CCSR address space - -The QMan revision information is located in the QMAN_IP_REV_1/2 registers which -are located at offsets 0xbf8 and 0xbfc - -- interrupts - Usage: Required - Value type: <prop-encoded-array> - Definition: Standard property. The error interrupt - -- fsl,qman-portals - Usage: Required - Value type: <phandle> - Definition: Phandle to this QMan instance's portals - -- fsl,liodn - Usage: See pamu.txt - Value type: <prop-encoded-array> - Definition: PAMU property used for static LIODN assignment - -- fsl,iommu-parent - Usage: See pamu.txt - Value type: <phandle> - Definition: PAMU property used for dynamic LIODN assignment - - For additional details about the PAMU/LIODN binding(s) see pamu.txt - -- clocks - Usage: See clock-bindings.txt and qoriq-clock.txt - Value type: <prop-encoded-array> - Definition: Reference input clock. Its frequency is half of the - platform clock -- memory-regions - Usage: Required for ARM - Value type: <phandle array> - Definition: List of phandles referencing the QMan private memory - nodes (described below). The qman-fqd node must be - first followed by qman-pfdr node. Only used on ARM - -Devices connected to a QMan instance via Direct Connect Portals (DCP) must link -to the respective QMan instance - -- fsl,qman - Usage: Required - Value type: <prop-encoded-array> - Description: List of phandle and DCP index pairs, to the QMan instance - to which this device is connected via the DCP - -QMan Private Memory Nodes - -QMan requires two contiguous range of physical memory used for the backing store -for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). -This memory is reserved/allocated as a node under the /reserved-memory node. - -For additional details about reserved memory regions see reserved-memory.txt - -The QMan FQD memory node must be named "qman-fqd" - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: PPC platforms: Must include "fsl,qman-fqd" - ARM platforms: Must include "shared-dma-pool" - as well as the "no-map" property - -The QMan PFDR memory node must be named "qman-pfdr" - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: PPC platforms: Must include "fsl,qman-pfdr" - ARM platforms: Must include "shared-dma-pool" - as well as the "no-map" property - -The following constraints are relevant to the FQD and PFDR private memory: - - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to - 1 GiB - - The alignment must be a muliptle of the memory size - -The size of the FQD and PFDP must be chosen by observing the hardware features -configured via the Reset Configuration Word (RCW) and that are relevant to a -specific board (e.g. number of MAC(s) pinned-out, number of offline/host command -FMan ports, etc.). The size configured in the DT must reflect the hardware -capabilities and not the specific needs of an application - -For additional details about reserved memory regions see reserved-memory.txt - -EXAMPLE - -The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - qman_fqd: qman-fqd { - compatible = "shared-dma-pool"; - size = <0 0x400000>; - alignment = <0 0x400000>; - no-map; - }; - qman_pfdr: qman-pfdr { - compatible = "shared-dma-pool"; - size = <0 0x2000000>; - alignment = <0 0x2000000>; - no-map; - }; - }; - -The example below shows a (P4080) QMan CCSR-space node - - qportals: qman-portals@ff4200000 { - ... - }; - - clockgen: global-utilities@e1000 { - ... - sysclk: sysclk { - ... - }; - ... - platform_pll: platform-pll@c00 { - #clock-cells = <1>; - reg = <0xc00 0x4>; - compatible = "fsl,qoriq-platform-pll-1.0"; - clocks = <&sysclk>; - clock-output-names = "platform-pll", "platform-pll-div2"; - }; - ... - }; - - crypto@300000 { - ... - fsl,qman = <&qman, 2>; - ... - }; - - qman: qman@318000 { - compatible = "fsl,qman"; - reg = <0x318000 0x1000>; - interrupts = <16 2 1 3> - fsl,liodn = <0x16>; - fsl,qman-portals = <&qportals>; - memory-region = <&qman_fqd &qman_pfdr>; - clocks = <&platform_pll 1>; - }; - - fman@400000 { - ... - fsl,qman = <&qman, 0>; - ... - }; diff --git a/Documentation/devicetree/bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml b/Documentation/devicetree/bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml new file mode 100644 index 000000000000..5c77c4925d19 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Kirin 960 USB OTG Battery Charging Syscon + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@kernel.org> + +properties: + compatible: + items: + - const: hisilicon,hi3660-usb3-otg-bc + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + usb-phy: + $ref: /schemas/phy/hisilicon,hi3660-usb3.yaml + description: USB Phy node + +required: + - compatible + - reg + - usb-phy + +additionalProperties: false + +examples: + - | + syscon@ff200000 { + compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd"; + reg = <0xff200000 0x1000>; + + usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/intel/intel,lgm-syscon.yaml b/Documentation/devicetree/bindings/soc/intel/intel,lgm-syscon.yaml new file mode 100644 index 000000000000..6951d55356d5 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/intel/intel,lgm-syscon.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/intel/intel,lgm-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Lightning Mountain(LGM) Syscon + +maintainers: + - Chuanhua Lei <lchuanhua@maxlinear.com> + - Rahul Tanwar <rtanwar@maxlinear.com> + +properties: + compatible: + items: + - const: intel,lgm-syscon + - const: syscon + + reg: + maxItems: 1 + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + "^emmc-phy@[0-9a-f]+$": + $ref: /schemas/phy/intel,lgm-emmc-phy.yaml# + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + chiptop@e0200000 { + compatible = "intel,lgm-syscon", "syscon"; + reg = <0xe0200000 0x100>; + ranges = <0x0 0xe0200000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + emmc-phy@a8 { + compatible = "intel,lgm-emmc-phy"; + reg = <0x00a8 0x10>; + clocks = <&emmc>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml index ba2014a8725c..a10326a9683d 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml @@ -33,6 +33,7 @@ properties: - mediatek,mt8186-disp-mutex - mediatek,mt8186-mdp3-mutex - mediatek,mt8188-disp-mutex + - mediatek,mt8188-vpp-mutex - mediatek,mt8192-disp-mutex - mediatek,mt8195-disp-mutex - mediatek,mt8195-vpp-mutex diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml new file mode 100644 index 000000000000..1f0b542d2296 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/microchip/microchip,sparx5-cpu-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 CPU Syscon + +maintainers: + - Lars Povlsen <lars.povlsen@microchip.com> + +properties: + compatible: + items: + - const: microchip,sparx5-cpu-syscon + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + mux-controller: + $ref: /schemas/mux/reg-mux.yaml# + +required: + - compatible + - reg + - mux-controller + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <1>; + + syscon@600000000 { + compatible = "microchip,sparx5-cpu-syscon", "syscon", + "simple-mfd"; + reg = <0x6 0x00000000 0xd0>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x88 0xf0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq5-olb.yaml b/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq5-olb.yaml new file mode 100644 index 000000000000..f7e606d45ebc --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq5-olb.yaml @@ -0,0 +1,374 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mobileye/mobileye,eyeq5-olb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ SoC system controller + +maintainers: + - Grégory Clement <gregory.clement@bootlin.com> + - Théo Lebrun <theo.lebrun@bootlin.com> + - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> + +description: + OLB ("Other Logic Block") is a hardware block grouping smaller blocks. Clocks, + resets, pinctrl are being handled from here. EyeQ5 and EyeQ6L host a single + instance. EyeQ6H hosts seven instances. + +properties: + compatible: + items: + - enum: + - mobileye,eyeq5-olb + - mobileye,eyeq6l-olb + - mobileye,eyeq6h-acc-olb + - mobileye,eyeq6h-central-olb + - mobileye,eyeq6h-east-olb + - mobileye,eyeq6h-west-olb + - mobileye,eyeq6h-south-olb + - mobileye,eyeq6h-ddr0-olb + - mobileye,eyeq6h-ddr1-olb + - const: syscon + + reg: + maxItems: 1 + + '#reset-cells': + description: + First cell is domain and optional if compatible has a single reset domain. + Second cell is reset index inside that domain. + enum: [ 1, 2 ] + + '#clock-cells': + description: + Cell is clock index. Optional if compatible has a single clock. + enum: [ 0, 1 ] + + clocks: + maxItems: 1 + description: + Input parent clock to all PLLs. Expected to be the main crystal. + + clock-names: + const: ref + +patternProperties: + '-pins?$': + type: object + description: Pin muxing configuration. + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + properties: + pins: true + function: + enum: [gpio, + # Bank A + timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0, + spi1, refclk0, + # Bank B + timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0] + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + required: + - pins + - function + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + pins: + items: # PA0 - PA28, PB0 - PB22 + pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$' + - if: + properties: + function: + const: timer0 + then: + properties: + pins: + items: + enum: [PA0, PA1] + - if: + properties: + function: + const: timer1 + then: + properties: + pins: + items: + enum: [PA2, PA3] + - if: + properties: + function: + const: timer2 + then: + properties: + pins: + items: + enum: [PA4, PA5] + - if: + properties: + function: + const: timer5 + then: + properties: + pins: + items: + enum: [PA6, PA7, PA8, PA9] + - if: + properties: + function: + const: uart0 + then: + properties: + pins: + items: + enum: [PA10, PA11] + - if: + properties: + function: + const: uart1 + then: + properties: + pins: + items: + enum: [PA12, PA13] + - if: + properties: + function: + const: can0 + then: + properties: + pins: + items: + enum: [PA14, PA15] + - if: + properties: + function: + const: can1 + then: + properties: + pins: + items: + enum: [PA16, PA17] + - if: + properties: + function: + const: spi0 + then: + properties: + pins: + items: + enum: [PA18, PA19, PA20, PA21, PA22] + - if: + properties: + function: + const: spi1 + then: + properties: + pins: + items: + enum: [PA23, PA24, PA25, PA26, PA27] + - if: + properties: + function: + const: refclk0 + then: + properties: + pins: + items: + enum: [PA28] + - if: + properties: + function: + const: timer3 + then: + properties: + pins: + items: + enum: [PB0, PB1] + - if: + properties: + function: + const: timer4 + then: + properties: + pins: + items: + enum: [PB2, PB3] + - if: + properties: + function: + const: timer6 + then: + properties: + pins: + items: + enum: [PB4, PB5, PB6, PB7] + - if: + properties: + function: + const: uart2 + then: + properties: + pins: + items: + enum: [PB8, PB9] + - if: + properties: + function: + const: can2 + then: + properties: + pins: + items: + enum: [PB10, PB11] + - if: + properties: + function: + const: spi2 + then: + properties: + pins: + items: + enum: [PB12, PB13, PB14, PB15, PB16] + - if: + properties: + function: + const: spi3 + then: + properties: + pins: + items: + enum: [PB17, PB18, PB19, PB20, PB21] + - if: + properties: + function: + const: mclk0 + then: + properties: + pins: + items: + enum: [PB22] + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +allOf: + # Compatibles exposing a single reset domain. + - if: + properties: + compatible: + contains: + enum: + - mobileye,eyeq6h-acc-olb + - mobileye,eyeq6h-east-olb + - mobileye,eyeq6h-west-olb + then: + properties: + '#reset-cells': + const: 1 + required: + - '#reset-cells' + + # Compatibles exposing two reset domains. + - if: + properties: + compatible: + contains: + enum: + - mobileye,eyeq5-olb + - mobileye,eyeq6l-olb + then: + properties: + '#reset-cells': + const: 2 + required: + - '#reset-cells' + + # Compatibles not exposing resets. + - if: + properties: + compatible: + contains: + enum: + - mobileye,eyeq6h-central-olb + - mobileye,eyeq6h-south-olb + - mobileye,eyeq6h-ddr0-olb + - mobileye,eyeq6h-ddr1-olb + then: + properties: + '#reset-cells': false + + # Compatibles exposing a single clock. + - if: + properties: + compatible: + contains: + enum: + - mobileye,eyeq6h-central-olb + - mobileye,eyeq6h-east-olb + - mobileye,eyeq6h-west-olb + - mobileye,eyeq6h-ddr0-olb + - mobileye,eyeq6h-ddr1-olb + then: + properties: + '#clock-cells': + const: 0 + else: + properties: + '#clock-cells': + const: 1 + + # Only EyeQ5 has pinctrl in OLB. + - if: + not: + properties: + compatible: + contains: + const: mobileye,eyeq5-olb + then: + patternProperties: + '-pins?$': false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + system-controller@e00000 { + compatible = "mobileye,eyeq5-olb", "syscon"; + reg = <0 0xe00000 0x0 0x400>; + #reset-cells = <2>; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "ref"; + }; + }; + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + system-controller@d2003000 { + compatible = "mobileye,eyeq6h-acc-olb", "syscon"; + reg = <0x0 0xd2003000 0x0 0x1000>; + #reset-cells = <1>; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "ref"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index b4478f417edc..7afdb60edb22 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -31,6 +31,7 @@ properties: - qcom,sc7280-aoss-qmp - qcom,sc8180x-aoss-qmp - qcom,sc8280xp-aoss-qmp + - qcom,sdx75-aoss-qmp - qcom,sdm845-aoss-qmp - qcom,sm6350-aoss-qmp - qcom,sm8150-aoss-qmp diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml index 58500529b90f..141d666dc3f7 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -41,6 +41,7 @@ properties: description: Three entries specifying the outgoing ipc bit used for signaling the remote end of the smp2p edge. + deprecated: true qcom,local-pid: $ref: /schemas/types.yaml#/definitions/uint32 @@ -128,7 +129,7 @@ examples: compatible = "qcom,smp2p"; qcom,smem = <431>, <451>; interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml index db67cf043256..4900215f26af 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml @@ -33,6 +33,14 @@ properties: specifier of the column in the subscription matrix representing the local processor. + mboxes: + minItems: 1 + maxItems: 5 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. Each entry represents the N:th remote processor by index + (0-indexed). + '#size-cells': const: 0 @@ -47,6 +55,7 @@ patternProperties: description: Three entries specifying the outgoing ipc bit used for signaling the N:th remote processor. + deprecated: true "@[0-9a-f]$": type: object @@ -98,15 +107,18 @@ required: - '#address-cells' - '#size-cells' -anyOf: - - required: - - qcom,ipc-1 - - required: - - qcom,ipc-2 - - required: - - qcom,ipc-3 +oneOf: - required: - - qcom,ipc-4 + - mboxes + - anyOf: + - required: + - qcom,ipc-1 + - required: + - qcom,ipc-2 + - required: + - qcom,ipc-3 + - required: + - qcom,ipc-4 additionalProperties: false @@ -122,7 +134,7 @@ examples: compatible = "qcom,smsm"; #address-cells = <1>; #size-cells = <0>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <0>, <0>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 79798c747476..78c6d5b64138 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -176,9 +176,10 @@ allOf: Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt patternProperties: - "phy@[0-9a-f]+$": - description: - Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt + "^phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/rockchip,rk3399-emmc-phy.yaml# + unevaluatedProperties: false - if: properties: @@ -292,6 +293,15 @@ examples: #phy-cells = <0>; }; + phy@f780 { + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780 0x20>; + clocks = <&sdhci>; + clock-names = "emmcclk"; + drive-impedance-ohm = <50>; + #phy-cells = <0>; + }; + u2phy0: usb2phy@e450 { compatible = "rockchip,rk3399-usb2phy"; reg = <0xe450 0x10>; diff --git a/Documentation/devicetree/bindings/soc/sprd/sprd,sc9863a-glbregs.yaml b/Documentation/devicetree/bindings/soc/sprd/sprd,sc9863a-glbregs.yaml new file mode 100644 index 000000000000..49add564e5e1 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/sprd/sprd,sc9863a-glbregs.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/sprd/sprd,sc9863a-glbregs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SC9863A Syscon + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + items: + - const: sprd,sc9863a-glbregs + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + "@[0-9a-f]+$": + $ref: /schemas/clock/sprd,sc9863a-clk.yaml + description: Clock controllers + +additionalProperties: false + +examples: + - | + syscon@20e00000 { + compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; + reg = <0x20e00000 0x4000>; + ranges = <0 0x20e00000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + apahb_gate: apahb-gate@0 { + compatible = "sprd,sc9863a-apahb-gate"; + reg = <0x0 0x1020>; + #clock-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/sti/st,sti-syscon.yaml b/Documentation/devicetree/bindings/soc/sti/st,sti-syscon.yaml index 5f97d9ff17fb..fc933d70d138 100644 --- a/Documentation/devicetree/bindings/soc/sti/st,sti-syscon.yaml +++ b/Documentation/devicetree/bindings/soc/sti/st,sti-syscon.yaml @@ -30,6 +30,15 @@ properties: reg: maxItems: 1 + sti-sasg-codec: + description: STi internal audio codec + type: object + additionalProperties: true + + properties: + compatible: + const: st,stih407-sas-codec + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml index a750035d6234..b6da72032151 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml @@ -40,7 +40,7 @@ properties: TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts. Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions. - Please see http://processors.wiki.ti.com/index.php/TISCI for + Please see https://software-dl.ti.com/tisci/esd/latest/index.html for protocol documentation for the values to be used for different devices. additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml b/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml new file mode 100644 index 000000000000..a10a3b89ae05 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/ti,am654-serdes-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments AM654 Serdes Control Syscon + +maintainers: + - Nishanth Menon <nm@ti.com> + +properties: + compatible: + items: + - const: ti,am654-serdes-ctrl + - const: syscon + + reg: + maxItems: 1 + + mux-controller: + $ref: /schemas/mux/reg-mux.yaml# + +required: + - compatible + - reg + - mux-controller + +additionalProperties: false + +examples: + - | + clock@4080 { + compatible = "ti,am654-serdes-ctrl", "syscon"; + reg = <0x4080 0x4>; + + mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x0 0x3>; /* lane select */ + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml index e6289fbe6907..378e9cc5fac2 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- -$id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml# +$id: http://devicetree.org/schemas/soc/ti/ti,j721e-system-controller.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI J721e System Controller Registers R/W @@ -19,7 +19,7 @@ description: | and access the registers directly. maintainers: - - Kishon Vijay Abraham I <kishon@ti.com> + - Kishon Vijay Abraham I <kishon@kernel.org> - Roger Quadros <rogerq@kernel.org> properties: diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt deleted file mode 100644 index ae5f7f057dc3..000000000000 --- a/Documentation/devicetree/bindings/sound/ak4104.txt +++ /dev/null @@ -1,25 +0,0 @@ -AK4104 S/PDIF transmitter - -This device supports SPI mode only. - -Required properties: - - - compatible : "asahi-kasei,ak4104" - - - reg : The chip select number on the SPI bus - - - vdd-supply : A regulator node, providing 2.7V - 3.6V - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the device starts. - -Example: - -spdif: ak4104@0 { - compatible = "asahi-kasei,ak4104"; - reg = <0>; - spi-max-frequency = <5000000>; - vdd-supply = <&vdd_3v3_reg>; -}; diff --git a/Documentation/devicetree/bindings/sound/ak4554.txt b/Documentation/devicetree/bindings/sound/ak4554.txt deleted file mode 100644 index 934fa02754b3..000000000000 --- a/Documentation/devicetree/bindings/sound/ak4554.txt +++ /dev/null @@ -1,11 +0,0 @@ -AK4554 ADC/DAC - -Required properties: - - - compatible : "asahi-kasei,ak4554" - -Example: - -ak4554-adc-dac { - compatible = "asahi-kasei,ak4554"; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt deleted file mode 100644 index 4e8cd7eb7cec..000000000000 --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Amlogic HDMI Tx control glue - -Required properties: -- compatible: "amlogic,g12a-tohdmitx" or - "amlogic,sm1-tohdmitx" -- reg: physical base address of the controller and length of memory - mapped region. -- #sound-dai-cells: should be 1. -- resets: phandle to the dedicated reset line of the hdmitx glue. - -Example on the S905X2 SoC: - -tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - resets = <&clkc_audio AUD_RESET_TOHDMITX>; -}; - -Example of an 'amlogic,axg-sound-card': - -sound { - compatible = "amlogic,axg-sound-card"; - -[...] - - dai-link-x { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - - codec-1 { - sound-dai = <&external_dac>; - }; - }; - - dai-link-y { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; - }; - }; - - dai-link-z { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.yaml new file mode 100644 index 000000000000..b4b78475c5b8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,g12a-tohdmitx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic G12a HDMI TX Control Glue + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + $nodename: + pattern: "^audio-controller@.*" + + compatible: + oneOf: + - items: + - const: amlogic,g12a-tohdmitx + - items: + - enum: + - amlogic,sm1-tohdmitx + - const: amlogic,g12a-tohdmitx + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + +required: + - compatible + - reg + - resets + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x744 0x4>; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + #sound-dai-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index d4277d342e69..0ecdaf7190e9 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -23,7 +23,6 @@ properties: audio-widgets: $ref: /schemas/types.yaml#/definitions/non-unique-string-array - minItems: 2 description: |- A list off component DAPM widget. Each entry is a pair of strings, the first being the widget type, the second being the widget name diff --git a/Documentation/devicetree/bindings/sound/asahi-kasei,ak4104.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4104.yaml new file mode 100644 index 000000000000..86f6061d3c50 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4104.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4104.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AK4104 S/PDIF transmitter + +allOf: + - $ref: dai-common.yaml# + +maintainers: + - Daniel Mack <github@zonque.org> + - Xiaxi Shen <shenxiaxi26@gmail.com> + +properties: + compatible: + const: asahi-kasei,ak4104 + + reg: + description: Chip select number on the SPI bus + maxItems: 1 + + vdd-supply: + description: A regulator node providing between 2.7V and 3.6V. + + reset-gpios: + maxItems: 1 + description: Optional GPIO spec for the reset pin, deasserted + before communication starts. + +required: + - compatible + - reg + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@0 { + compatible = "asahi-kasei,ak4104"; + reg = <0>; + vdd-supply = <&vdd_3v3_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ak4375.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4375.yaml index 587598e122c6..bc07fcba535b 100644 --- a/Documentation/devicetree/bindings/sound/ak4375.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4375.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4375.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4375.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4375 DAC and headphones amplifier diff --git a/Documentation/devicetree/bindings/sound/asahi-kasei,ak4554.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4554.yaml new file mode 100644 index 000000000000..c77d85df239e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4554.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4554.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AK4554 sound codec + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +properties: + compatible: + const: asahi-kasei,ak4554 + +required: + - compatible + +additionalProperties: false + +examples: + - | + codec { + compatible = "asahi-kasei,ak4554"; + }; diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4613.yaml index 75e13414d6eb..b49a6cff9f1f 100644 --- a/Documentation/devicetree/bindings/sound/ak4613.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4613.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4613.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4613.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4613 I2C transmitter diff --git a/Documentation/devicetree/bindings/sound/asahi-kasei,ak4619.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4619.yaml new file mode 100644 index 000000000000..d412531ef9a2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4619.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4619.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AK4619 I2C transmitter + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + - Khanh Le <khanh.le.xr@renesas.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: asahi-kasei,ak4619 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + "#sound-dai-cells": + const: 0 + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@10 { + compatible = "asahi-kasei,ak4619"; + reg = <0x10>; + + clocks = <&rcar_sound>; + clock-names = "mclk"; + + #sound-dai-cells = <0>; + port { + ak4619_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4642.yaml index 437fe5d7cae1..fc03f0373a1a 100644 --- a/Documentation/devicetree/bindings/sound/ak4642.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4642.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4642.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4642.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4642 I2C transmitter diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml index d3ce4de449d5..f943f90d8b15 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -23,6 +23,11 @@ properties: Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. $ref: /schemas/types.yaml#/definitions/non-unique-string-array + aux-devs: + description: | + List of phandles pointing to auxiliary devices, such + as amplifiers, to be added to the sound card. + $ref: /schemas/types.yaml#/definitions/phandle-array multi: type: object description: Multi-CPU/Codec node diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml index 28b27e7e45de..d1cbfc5edd3a 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -25,6 +25,15 @@ definitions: capture-only: description: port connection used only for capture $ref: /schemas/types.yaml#/definitions/flag + link-trigger-order: + description: trigger order for both start/stop + $ref: /schemas/types.yaml#/definitions/uint32-array + link-trigger-order-start: + description: trigger order for start + $ref: /schemas/types.yaml#/definitions/uint32-array + link-trigger-order-stop: + description: trigger order for stop + $ref: /schemas/types.yaml#/definitions/uint32-array endpoint-base: allOf: diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml new file mode 100644 index 000000000000..336e11773694 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs4270.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS4270 audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +description: + The CS4270 is a stereo audio codec. The driver for this device currently only + supports I2C. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: cirrus,cs4270 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + reset-gpios: + description: + This pin will be deasserted before communication to the codec starts. + maxItems: 1 + + va-supply: + description: Analog power supply. + + vd-supply: + description: Digital power supply. + + vlc-supply: + description: Serial Control Port power supply. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@48 { + compatible = "cirrus,cs4270"; + reg = <0x48>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml new file mode 100644 index 000000000000..725b47e82062 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42xx8.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42448/CS42888 audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +properties: + compatible: + enum: + - cirrus,cs42448 + - cirrus,cs42888 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + const: mclk + + VA-supply: + description: Analog power supply. + + VD-supply: + description: Digital power supply. + + VLC-supply: + description: Control port power supply + + VLS-supply: + description: Serial port interface power supply. + + reset-gpios: + description: This pin is connected to the chip's RESET pin. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + contains: + const: cirrus,cs42888 +then: + required: + - VA-supply + - VD-supply + - VLC-supply + - VLS-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@48 { + compatible = "cirrus,cs42888"; + reg = <0x48>; + clocks = <&codec_mclk 0>; + clock-names = "mclk"; + VA-supply = <®_audio>; + VD-supply = <®_audio>; + VLS-supply = <®_audio>; + VLC-supply = <®_audio>; + reset-gpios = <&gpio 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml new file mode 100644 index 000000000000..9582eb8eb418 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs530x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic cs530x family of audio ADCs + +maintainers: + - Paul Handrigan <paulha@opensource.cirrus.com> + - patches@opensource.cirrus.com + +description: + The CS530X devices are a family of high performance audio ADCs. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - cirrus,cs5302 + - cirrus,cs5304 + - cirrus,cs5308 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + reset-gpios: + maxItems: 1 + + vdd-a-supply: + description: Analog power supply + + vdd-io-supply: + description: Digital IO power supply + + cirrus,in-hiz-pin12: + description: + Sets input channels one and two to high impedance. + type: boolean + + cirrus,in-hiz-pin34: + description: + Sets input channels three and four to high impedance. + type: boolean + + cirrus,in-hiz-pin56: + description: + Sets input channels five and six to high impedance. + type: boolean + + cirrus,in-hiz-pin78: + description: + Sets input channels seven and eight to high impedance. + type: boolean + +required: + - compatible + - reg + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cs5304: adc@48 { + compatible = "cirrus,cs5304"; + reg = <0x48>; + #sound-dai-cells = <1>; + reset-gpios = <&gpio 110 GPIO_ACTIVE_LOW>; + vdd-a-supply = <&vreg>; + vdd-io-supply = <&vreg>; + cirrus,in-hiz-pin34; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt deleted file mode 100644 index c33770ec4c3c..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4270.txt +++ /dev/null @@ -1,21 +0,0 @@ -CS4270 audio CODEC - -The driver for this device currently only supports I2C. - -Required properties: - - - compatible : "cirrus,cs4270" - - - reg : the I2C address of the device for I2C - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. - -Example: - -codec: cs4270@48 { - compatible = "cirrus,cs4270"; - reg = <0x48>; -}; diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt deleted file mode 100644 index bbfe39347c20..000000000000 --- a/Documentation/devicetree/bindings/sound/cs42xx8.txt +++ /dev/null @@ -1,34 +0,0 @@ -CS42448/CS42888 audio CODEC - -Required properties: - - - compatible : must contain one of "cirrus,cs42448" and "cirrus,cs42888" - - - reg : the I2C address of the device for I2C - - - clocks : a list of phandles + clock-specifiers, one for each entry in - clock-names - - - clock-names : must contain "mclk" - - - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device, - as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Optional properties: - - - reset-gpios : a GPIO spec to define which pin is connected to the chip's - !RESET pin - -Example: - -cs42888: codec@48 { - compatible = "cirrus,cs42888"; - reg = <0x48>; - clocks = <&codec_mclk 0>; - clock-names = "mclk"; - VA-supply = <®_audio>; - VD-supply = <®_audio>; - VLS-supply = <®_audio>; - VLC-supply = <®_audio>; - reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/sound/everest,es7134.txt b/Documentation/devicetree/bindings/sound/everest,es7134.txt deleted file mode 100644 index 091666069bde..000000000000 --- a/Documentation/devicetree/bindings/sound/everest,es7134.txt +++ /dev/null @@ -1,15 +0,0 @@ -ES7134 i2s DA converter - -Required properties: -- compatible : "everest,es7134" or - "everest,es7144" or - "everest,es7154" -- VDD-supply : regulator phandle for the VDD supply -- PVDD-supply: regulator phandle for the PVDD supply for the es7154 - -Example: - -i2s_codec: external-codec { - compatible = "everest,es7134"; - VDD-supply = <&vcc_5v>; -}; diff --git a/Documentation/devicetree/bindings/sound/everest,es71x4.yaml b/Documentation/devicetree/bindings/sound/everest,es71x4.yaml new file mode 100644 index 000000000000..fd1b32812228 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/everest,es71x4.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/everest,es71x4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Everest ES7134/7144/7154 2 channels I2S analog to digital converter + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - everest,es7134 + - everest,es7144 + - everest,es7154 + + VDD-supply: true + PVDD-supply: true + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - VDD-supply + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - everest,es7134 + - everest,es7144 + then: + properties: + PVDD-supply: false + + - if: + properties: + compatible: + contains: + enum: + - everest,es7154 + then: + required: + - PVDD-supply + +unevaluatedProperties: false + +examples: + - | + codec { + compatible = "everest,es7134"; + #sound-dai-cells = <0>; + VDD-supply = <&vdd_supply>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/everest,es7241.txt b/Documentation/devicetree/bindings/sound/everest,es7241.txt deleted file mode 100644 index 28f82cf4959f..000000000000 --- a/Documentation/devicetree/bindings/sound/everest,es7241.txt +++ /dev/null @@ -1,28 +0,0 @@ -ES7241 i2s AD converter - -Required properties: -- compatible : "everest,es7241" -- VDDP-supply: regulator phandle for the VDDA supply -- VDDA-supply: regulator phandle for the VDDP supply -- VDDD-supply: regulator phandle for the VDDD supply - -Optional properties: -- reset-gpios: gpio connected to the reset pin -- m0-gpios : gpio connected to the m0 pin -- m1-gpios : gpio connected to the m1 pin -- everest,sdout-pull-down: - Format used by the serial interface is controlled by pulling - the sdout. If the sdout is pulled down, leftj format is used. - If this property is not provided, sdout is assumed to pulled - up and i2s format is used - -Example: - -linein: audio-codec@2 { - #sound-dai-cells = <0>; - compatible = "everest,es7241"; - VDDA-supply = <&vcc_3v3>; - VDDP-supply = <&vcc_3v3>; - VDDD-supply = <&vcc_3v3>; - reset-gpios = <&gpio GPIOH_42>; -}; diff --git a/Documentation/devicetree/bindings/sound/everest,es7241.yaml b/Documentation/devicetree/bindings/sound/everest,es7241.yaml new file mode 100644 index 000000000000..f179af758730 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/everest,es7241.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/everest,es7241.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Everest ES7241 2 channels I2S analog to digital converter + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - everest,es7241 + + reset-gpios: + maxItems: 1 + description: GPIO connected to the reset pin + + m0-gpios: + maxItems: 1 + description: GPIO connected to the m0 pin + + m1-gpios: + maxItems: 1 + description: GPIO connected to the m0 pin + + everest,sdout-pull-down: + type: boolean + description: + Format used by the serial interface is controlled by pulling + the sdout. If the sdout is pulled down, leftj format is used. + If this property is not provided, sdout is assumed to pulled + up and i2s format is used + + VDDP-supply: true + VDDA-supply: true + VDDD-supply: true + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - VDDP-supply + - VDDA-supply + - VDDD-supply + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + codec { + compatible = "everest,es7241"; + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + VDDP-supply = <&vddp_supply>; + VDDA-supply = <&vdda_supply>; + VDDD-supply = <&vddd_supply>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/everest,es8316.yaml b/Documentation/devicetree/bindings/sound/everest,es8316.yaml index b6079b3c440d..214f135b7777 100644 --- a/Documentation/devicetree/bindings/sound/everest,es8316.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es8316.yaml @@ -4,18 +4,21 @@ $id: http://devicetree.org/schemas/sound/everest,es8316.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Everest ES8316 audio CODEC +title: Everest ES8311 and ES8316 audio CODECs maintainers: - Daniel Drake <drake@endlessm.com> - Katsuhiro Suzuki <katsuhiro@katsuster.net> + - Matteo Martelli <matteomartelli3@gmail.com> allOf: - $ref: dai-common.yaml# properties: compatible: - const: everest,es8316 + enum: + - everest,es8311 + - everest,es8316 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-audio-spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-audio-spdif.yaml deleted file mode 100644 index 5fc543d02ecb..000000000000 --- a/Documentation/devicetree/bindings/sound/fsl,imx-audio-spdif.yaml +++ /dev/null @@ -1,66 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/fsl,imx-audio-spdif.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Freescale i.MX audio complex with S/PDIF transceiver - -maintainers: - - Shengjiu Wang <shengjiu.wang@nxp.com> - -properties: - compatible: - oneOf: - - items: - - enum: - - fsl,imx-sabreauto-spdif - - fsl,imx6sx-sdb-spdif - - const: fsl,imx-audio-spdif - - enum: - - fsl,imx-audio-spdif - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - - spdif-controller: - $ref: /schemas/types.yaml#/definitions/phandle - description: The phandle of the i.MX S/PDIF controller - - spdif-out: - type: boolean - description: - If present, the transmitting function of S/PDIF will be enabled, - indicating there's a physical S/PDIF out connector or jack on the - board or it's connecting to some other IP block, such as an HDMI - encoder or display-controller. - - spdif-in: - type: boolean - description: - If present, the receiving function of S/PDIF will be enabled, - indicating there is a physical S/PDIF in connector/jack on the board. - -required: - - compatible - - model - - spdif-controller - -anyOf: - - required: - - spdif-in - - required: - - spdif-out - -additionalProperties: false - -examples: - - | - sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; - }; diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.yaml b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml index 8b33353a80ca..030ccc173130 100644 --- a/Documentation/devicetree/bindings/sound/fsl,mqs.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml @@ -23,6 +23,8 @@ properties: - fsl,imx8qm-mqs - fsl,imx8qxp-mqs - fsl,imx93-mqs + - fsl,imx95-aonmix-mqs + - fsl,imx95-netcmix-mqs clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl,qmc-audio.yaml b/Documentation/devicetree/bindings/sound/fsl,qmc-audio.yaml index b522ed7dcc51..a23e49198c37 100644 --- a/Documentation/devicetree/bindings/sound/fsl,qmc-audio.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,qmc-audio.yaml @@ -12,7 +12,9 @@ maintainers: description: | The QMC audio is an ASoC component which uses QMC (QUICC Multichannel Controller) channels to transfer the audio data. - It provides as many DAI as the number of QMC channel used. + It provides several DAIs. For each DAI, the DAI is working in interleaved mode + if only one QMC channel is used by the DAI or it is working in non-interleaved + mode if several QMC channels are used by the DAI. allOf: - $ref: dai-common.yaml# @@ -45,12 +47,19 @@ patternProperties: fsl,qmc-chan: $ref: /schemas/types.yaml#/definitions/phandle-array items: - - items: - - description: phandle to QMC node - - description: Channel number + items: + - description: phandle to QMC node + - description: Channel number + minItems: 1 description: - Should be a phandle/number pair. The phandle to QMC node and the QMC - channel to use for this DAI. + Should be a phandle/number pair list. The list of phandle to QMC node + and the QMC channel pair to use for this DAI. + If only one phandle/number pair is provided, this DAI works in + interleaved mode, i.e. audio channels for this DAI are interleaved in + the QMC channel. If more than one pair is provided, this DAI works + in non-interleave mode. In that case the first audio channel uses the + the first QMC channel, the second audio channel uses the second QMC + channel, etc... required: - reg @@ -79,6 +88,11 @@ examples: reg = <17>; fsl,qmc-chan = <&qmc 17>; }; + dai@18 { + reg = <18>; + /* Non-interleaved mode */ + fsl,qmc-chan = <&qmc 18>, <&qmc 19>; + }; }; sound { @@ -115,4 +129,19 @@ examples: dai-tdm-slot-rx-mask = <0 0 1 0 1 0 1 0 1>; }; }; + simple-audio-card,dai-link@2 { + reg = <2>; + format = "dsp_b"; + cpu { + sound-dai = <&audio_controller 18>; + }; + codec { + sound-dai = <&codec3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <8>; + /* TS 9, 10 */ + dai-tdm-slot-tx-mask = <0 0 0 0 0 0 0 0 0 1 1>; + dai-tdm-slot-rx-mask = <0 0 0 0 0 0 0 0 0 1 1>; + }; + }; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml index 188f38baddec..3d5d435c765b 100644 --- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -29,6 +29,7 @@ properties: - fsl,imx8mp-rpmsg-audio - fsl,imx8ulp-rpmsg-audio - fsl,imx93-rpmsg-audio + - fsl,imx95-rpmsg-audio clocks: items: diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/fsl,sgtl5000.yaml index 1353c051488f..c6ab1ca16763 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,sgtl5000.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/sgtl5000.yaml# +$id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale SGTL5000 Stereo Codec diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml index 0eb0c1ba8710..5e2801014221 100644 --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -22,6 +22,7 @@ properties: enum: - fsl,imx8mp-xcvr - fsl,imx93-xcvr + - fsl,imx95-xcvr reg: items: @@ -41,6 +42,7 @@ properties: items: - description: WAKEUPMIX Audio XCVR Interrupt 1 - description: WAKEUPMIX Audio XCVR Interrupt 2 + - description: SPDIF wakeup interrupt from PHY minItems: 1 clocks: @@ -49,6 +51,9 @@ properties: - description: PHY clock - description: SPBA clock - description: PLL clock + - description: PLL clock source for 8kHz series + - description: PLL clock source for 11kHz series + minItems: 4 clock-names: items: @@ -56,6 +61,9 @@ properties: - const: phy - const: spba - const: pll_ipg + - const: pll8k + - const: pll11k + minItems: 4 dmas: items: @@ -79,15 +87,25 @@ required: - clock-names - dmas - dma-names - - resets allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + const: fsl,imx8mp-xcvr + then: + required: + - resets + - if: properties: compatible: contains: enum: - fsl,imx93-xcvr + - fsl,imx95-xcvr then: properties: interrupts: @@ -96,9 +114,24 @@ allOf: else: properties: interrupts: - maxItems: 1 + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mp-xcvr + - fsl,imx93-xcvr + then: + properties: + clocks: + maxItems: 4 + clock-names: + maxItems: 4 -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -113,7 +146,9 @@ examples: <0x30cc0c00 0x080>, <0x30cc0e00 0x080>; reg-names = "ram", "regs", "rxfifo", "txfifo"; - interrupts = <0x0 128 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>, <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>, <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>, diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml b/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml index 9922664d5ccc..92aa47ec72c7 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml @@ -67,6 +67,11 @@ properties: - fsl,imx-audio-wm8962 - items: - enum: + - fsl,imx-sabreauto-spdif + - fsl,imx6sx-sdb-spdif + - const: fsl,imx-audio-spdif + - items: + - enum: - fsl,imx-audio-ac97 - fsl,imx-audio-cs42888 - fsl,imx-audio-cs427x @@ -81,6 +86,7 @@ properties: - fsl,imx-audio-wm8960 - fsl,imx-audio-wm8962 - fsl,imx-audio-wm8958 + - fsl,imx-audio-spdif model: $ref: /schemas/types.yaml#/definitions/string @@ -93,8 +99,15 @@ properties: need to add ASRC support via DPCM. audio-codec: - $ref: /schemas/types.yaml#/definitions/phandle - description: The phandle of an audio codec + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + The phandle of an audio codec. + With "fsl,imx-audio-spdif", either SPDIF audio codec spdif_transmitter, + spdif_receiver or both. + minItems: 1 + maxItems: 2 + items: + maxItems: 1 audio-cpu: $ref: /schemas/types.yaml#/definitions/phandle @@ -150,8 +163,10 @@ properties: description: dai-link uses bit clock inversion. mclk-id: - $ref: /schemas/types.yaml#/definitions/uint32 - description: main clock id, specific for each card configuration. + $ref: /schemas/types.yaml#/definitions/uint32-array + description: Main clock id for each codec, specific for each card configuration. + minItems: 1 + maxItems: 2 mux-int-port: $ref: /schemas/types.yaml#/definitions/uint32 @@ -167,6 +182,27 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of an CPU DAI controller + spdif-controller: + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + description: The phandle of an S/PDIF CPU DAI controller. + + spdif-out: + type: boolean + deprecated: true + description: | + If present, the transmitting function of S/PDIF will be enabled, + indicating there's a physical S/PDIF out connector or jack on the + board or it's connecting to some other IP block, such as an HDMI + encoder or display-controller. + + spdif-in: + type: boolean + deprecated: true + description: | + If present, the receiving function of S/PDIF will be enabled, + indicating there is a physical S/PDIF in connector/jack on the board. + required: - compatible - model @@ -195,3 +231,12 @@ examples: "AIN2L", "Line In Jack", "AIN2R", "Line In Jack"; }; + + - | + sound-spdif-asrc { + compatible = "fsl,imx-audio-spdif"; + model = "spdif-asrc-audio"; + audio-cpu = <&spdif>; + audio-asrc = <&easrc>; + audio-codec = <&spdifdit>, <&spdifdir>; + }; diff --git a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml b/Documentation/devicetree/bindings/sound/linux,spdif.yaml index fe5f0756af2f..0f4893e11ec4 100644 --- a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml +++ b/Documentation/devicetree/bindings/sound/linux,spdif.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/linux,spdif-dit.yaml# +$id: http://devicetree.org/schemas/sound/linux,spdif.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dummy SPDIF Transmitter +title: Dummy SPDIF Transmitter/Receiver maintainers: - Mark Brown <broonie@kernel.org> @@ -14,7 +14,9 @@ allOf: properties: compatible: - const: linux,spdif-dit + enum: + - linux,spdif-dit + - linux,spdif-dir "#sound-dai-cells": const: 0 diff --git a/Documentation/devicetree/bindings/sound/maxim,max98088.txt b/Documentation/devicetree/bindings/sound/maxim,max98088.txt deleted file mode 100644 index da764d913319..000000000000 --- a/Documentation/devicetree/bindings/sound/maxim,max98088.txt +++ /dev/null @@ -1,23 +0,0 @@ -MAX98088 audio CODEC - -This device supports I2C only. - -Required properties: - -- compatible: "maxim,max98088" or "maxim,max98089". -- reg: The I2C address of the device. - -Optional properties: - -- clocks: the clock provider of MCLK, see ../clock/clock-bindings.txt section - "consumer" for more information. -- clock-names: must be set to "mclk" - -Example: - -max98089: codec@10 { - compatible = "maxim,max98089"; - reg = <0x10>; - clocks = <&clks IMX6QDL_CLK_CKO2>; - clock-names = "mclk"; -}; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98088.yaml b/Documentation/devicetree/bindings/sound/maxim,max98088.yaml new file mode 100644 index 000000000000..e4a2967e1e81 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98088.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98088.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX98088 audio CODEC + +maintainers: + - Abdulrasaq Lawani <abdulrasaqolawani@gmail.com> + +properties: + compatible: + enum: + - maxim,max98088 + - maxim,max98089 + + reg: + maxItems: 1 + + clocks: + items: + - description: master clock + + clock-names: + items: + - const: mclk + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@10 { + compatible = "maxim,max98089"; + reg = <0x10>; + clocks = <&clks 0>; + clock-names = "mclk"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/mscc,zl38060.yaml index 8bd201e573aa..994313fd12b2 100644 --- a/Documentation/devicetree/bindings/sound/zl38060.yaml +++ b/Documentation/devicetree/bindings/sound/mscc,zl38060.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/zl38060.yaml# +$id: http://devicetree.org/schemas/sound/mscc,zl38060.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: ZL38060 Connected Home Audio Processor from Microsemi. diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml index 3dbf438c3841..232dc16a94a3 100644 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml @@ -23,6 +23,14 @@ properties: '#sound-dai-cells': const: 0 + clocks: + items: + - description: The phandle of the master clock to the CODEC + + clock-names: + items: + - const: mclk + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml b/Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml new file mode 100644 index 000000000000..40a0877a8aba --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nxp,lpc3220-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32XX I2S Controller + +description: + The I2S controller in LPC32XX SoCs, ASoC DAI. + +maintainers: + - J.M.B. Downing <jonathan.downing@nautel.com> + - Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nxp,lpc3220-i2s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: input clock of the peripheral. + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - dmas + - dma-names + - '#sound-dai-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc32xx-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2s@20094000 { + compatible = "nxp,lpc3220-i2s"; + reg = <0x20094000 0x1000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_I2S0>; + dmas = <&dma 0 1>, <&dma 13 1>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt deleted file mode 100644 index ff98a0cb5b3f..000000000000 --- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Texas Instruments OMAP4+ McPDM - -Required properties: -- compatible: "ti,omap4-mcpdm" -- reg: Register location and size as an array: - <MPU access base address, size>, - <L3 interconnect address, size>; -- interrupts: Interrupt number for McPDM -- ti,hwmods: Name of the hwmod associated to the McPDM -- clocks: phandle for the pdmclk provider, likely <&twl6040> -- clock-names: Must be "pdmclk" - -Example: - -mcpdm: mcpdm@40132000 { - compatible = "ti,omap4-mcpdm"; - reg = <0x40132000 0x7f>, /* MPU private access */ - <0x49032000 0x7f>; /* L3 Interconnect */ - interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; - ti,hwmods = "mcpdm"; -}; - -In board DTS file the pdmclk needs to be added: - -&mcpdm { - clocks = <&twl6040>; - clock-names = "pdmclk"; - status = "okay"; -}; diff --git a/Documentation/devicetree/bindings/sound/pcm512x.txt b/Documentation/devicetree/bindings/sound/pcm512x.txt index 77006a4aec4a..47878a6df608 100644 --- a/Documentation/devicetree/bindings/sound/pcm512x.txt +++ b/Documentation/devicetree/bindings/sound/pcm512x.txt @@ -6,7 +6,7 @@ on the board). The TAS575x devices only support I2C. Required properties: - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141", - "ti,pcm5142", "ti,tas5754" or "ti,tas5756" + "ti,pcm5142", "ti,pcm5242", "ti,tas5754" or "ti,tas5756" - reg : the I2C address of the device for I2C, the chip select number for SPI. diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt deleted file mode 100644 index e1b9fa8a5bf8..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt +++ /dev/null @@ -1,128 +0,0 @@ -* Qualcomm Technologies APQ8096 ASoC sound card driver - -This binding describes the APQ8096 sound card, which uses qdsp for audio. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,apq8096-sndcard" - -- audio-routing: - Usage: Optional - Value type: <stringlist> - Definition: A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source. Valid names could be power supplies, MicBias - of codec and the jacks on the board: - Valid names include: - - Board Connectors: - "Headphone Left" - "Headphone Right" - "Earphone" - "Line Out1" - "Line Out2" - "Line Out3" - "Line Out4" - "Analog Mic1" - "Analog Mic2" - "Analog Mic3" - "Analog Mic4" - "Analog Mic5" - "Analog Mic6" - "Digital Mic2" - "Digital Mic3" - - Audio pins and MicBias on WCD9335 Codec: - "MIC_BIAS1" - "MIC_BIAS2" - "MIC_BIAS3" - "MIC_BIAS4" - "AMIC1" - "AMIC2" - "AMIC3" - "AMIC4" - "AMIC5" - "AMIC6" - "AMIC6" - "DMIC1" - "DMIC2" - "DMIC3" - -- model: - Usage: required - Value type: <stringlist> - Definition: The user-visible name of this sound card. - -- aux-devs - Usage: optional - Value type: <array of phandles> - Definition: A list of phandles for auxiliary devices (e.g. analog - amplifiers) that do not appear directly within the DAI - links. Should be connected to another audio component - using "audio-routing". - -= dailinks -Each subnode of sndcard represents either a dailink, and subnodes of each -dailinks would be cpu/codec/platform dais. - -- link-name: - Usage: required - Value type: <string> - Definition: User friendly name for dai link - -= CPU, PLATFORM, CODEC dais subnodes -- cpu: - Usage: required - Value type: <subnode> - Definition: cpu dai sub-node - -- codec: - Usage: Optional - Value type: <subnode> - Definition: codec dai sub-node - -- platform: - Usage: Optional - Value type: <subnode> - Definition: platform dai sub-node - -- sound-dai: - Usage: required - Value type: <phandle with arguments> - Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node. - -Obsolete: - qcom,model: String for soundcard name (Use model instead) - qcom,audio-routing: A list of the connections between audio components. - (Use audio-routing instead) - -Example: - -audio { - compatible = "qcom,apq8096-sndcard"; - model = "DB820c"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI Playback"; - cpu { - sound-dai = <&q6afe HDMI_RX>; - }; - - platform { - sound-dai = <&q6adm>; - }; - - codec { - sound-dai = <&hdmi 0>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital-codec.yaml b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital-codec.yaml new file mode 100644 index 000000000000..a899c4e7c1c9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital-codec.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,msm8916-wcd-digital-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8916 WCD Digital Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + The digital WCD audio codec found on Qualcomm MSM8916 LPASS. + +properties: + compatible: + const: qcom,msm8916-wcd-digital-codec + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: ahbix-clk + - const: mclk + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#sound-dai-cells' + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt deleted file mode 100644 index 1c8e4cb25176..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt +++ /dev/null @@ -1,20 +0,0 @@ -msm8916 digital audio CODEC - -## Bindings for codec core in lpass: - -Required properties - - compatible = "qcom,msm8916-wcd-digital-codec"; - - reg: address space for lpass codec. - - clocks: Handle to mclk and ahbclk - - clock-names: should be "mclk", "ahbix-clk". - -Example: - -audio-codec@771c000{ - compatible = "qcom,msm8916-wcd-digital-codec"; - reg = <0x0771c000 0x400>; - clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, - <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "ahbix-clk", "mclk"; - #sound-dai-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index b2e15ebbd1bc..c9076dcd44c1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -28,6 +28,7 @@ properties: - const: qcom,sm8450-sndcard - enum: - qcom,apq8016-sbc-sndcard + - qcom,apq8096-sndcard - qcom,msm8916-qdsp6-sndcard - qcom,qcm6490-idp-sndcard - qcom,qcs6490-rb3gen2-sndcard diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml new file mode 100644 index 000000000000..d3cf8f59cb23 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd937x-sdw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoundWire Slave devices on WCD9370/WCD9375 + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire slave devices. This bindings is for the + slave devices. + +properties: + compatible: + const: sdw20217010a00 + + reg: + maxItems: 1 + + qcom,tx-port-mapping: + description: | + Specifies static port mapping between device and host tx ports. + In the order of the device port index which are adc1_port, adc23_port, + dmic03_mbhc_port, dmic46_port. + Supports maximum 4 tx soundwire ports. + + WCD9370 TX Port 1 (ADC1) <=> SWR2 Port 2 + WCD9370 TX Port 2 (ADC2, 3) <=> SWR2 Port 2 + WCD9370 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 + WCD9370 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 + + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + items: + enum: [1, 2, 3, 4] + + qcom,rx-port-mapping: + description: | + Specifies static port mapping between device and host rx ports. + In the order of device port index which are hph_port, clsh_port, + comp_port, lo_port, dsd port. + Supports maximum 5 rx soundwire ports. + + WCD9370 RX Port 1 (HPH_L/R) <==> SWR1 Port 1 (HPH_L/R) + WCD9370 RX Port 2 (CLSH) <==> SWR1 Port 2 (CLSH) + WCD9370 RX Port 3 (COMP_L/R) <==> SWR1 Port 3 (COMP_L/R) + WCD9370 RX Port 4 (LO) <==> SWR1 Port 4 (LO) + WCD9370 RX Port 5 (DSD_L/R) <==> SWR1 Port 5 (DSD) + + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 5 + maxItems: 5 + items: + enum: [1, 2, 3, 4, 5] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soundwire@3210000 { + reg = <0x03210000 0x2000>; + #address-cells = <2>; + #size-cells = <0>; + wcd937x_rx: codec@0,4 { + compatible = "sdw20217010a00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + }; + + soundwire@3230000 { + reg = <0x03230000 0x2000>; + #address-cells = <2>; + #size-cells = <0>; + wcd937x_tx: codec@0,3 { + compatible = "sdw20217010a00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml new file mode 100644 index 000000000000..de397d879acc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCD9370/WCD9375 Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire slave devices. + +allOf: + - $ref: dai-common.yaml# + - $ref: qcom,wcd93xx-common.yaml# + +properties: + compatible: + oneOf: + - const: qcom,wcd9370-codec + - items: + - const: qcom,wcd9375-codec + - const: qcom,wcd9370-codec + + vdd-px-supply: + description: A reference to the 1.8V I/O supply + +required: + - compatible + - vdd-px-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + codec { + compatible = "qcom,wcd9370-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>; + pinctrl-1 = <&wcd_reset_n_sleep>; + reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-px-supply = <&vreg_l18b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,rx-device = <&wcd937x_rx>; + qcom,tx-device = <&wcd937x_tx>; + #sound-dai-cells = <1>; + }; + + /* ... */ + + soundwire@3210000 { + reg = <0x03210000 0x2000>; + #address-cells = <2>; + #size-cells = <0>; + wcd937x_rx: codec@0,4 { + compatible = "sdw20217010a00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + }; + + soundwire@3230000 { + reg = <0x03230000 0x2000>; + #address-cells = <2>; + #size-cells = <0>; + wcd937x_tx: codec@0,3 { + compatible = "sdw20217010a00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 2 3 4>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml index 8e462cdf0018..14d312f9c345 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml @@ -32,6 +32,14 @@ properties: vdd-supply: description: VDD Supply for the Codec + qcom,port-mapping: + description: | + Specifies static port mapping between slave and master ports. + In the order of slave port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + '#thermal-sensor-cells': const: 0 diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml index 22798d22d981..83e0360301e1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -32,6 +32,14 @@ properties: description: Powerdown/Shutdown line to use (pin SD_N) maxItems: 1 + qcom,port-mapping: + description: | + Specifies static port mapping between slave and master ports. + In the order of slave port index. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 6 + '#sound-dai-cells': const: 0 diff --git a/Documentation/devicetree/bindings/sound/rt1019.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1019.yaml index 3d5a91a942f4..adf5e38f4dbc 100644 --- a/Documentation/devicetree/bindings/sound/rt1019.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1019.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/rt1019.yaml# +$id: http://devicetree.org/schemas/sound/realtek,rt1019.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: RT1019 Mono Class-D Audio Amplifier diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5514.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5514.yaml new file mode 100644 index 000000000000..7fbf7739c371 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt5514.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5514.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT5514 audio CODEC + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +description: | + This device supports both I2C and SPI. + + Pins on the device (for linking into audio routes) for I2C: + * DMIC1L + * DMIC1R + * DMIC2L + * DMIC2R + * AMICL + * AMICR + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - $ref: dai-common.yaml# + +properties: + compatible: + const: realtek,rt5514 + + reg: + maxItems: 1 + + clocks: + items: + - description: Master clock to the CODEC + + clock-names: + items: + - const: mclk + + interrupts: + maxItems: 1 + description: The interrupt number to the cpu. + + realtek,dmic-init-delay-ms: + description: Set the DMIC initial delay (ms) to wait it ready for I2C. + + spi-max-frequency: true + + wakeup-source: + type: boolean + description: Flag to indicate this device can wake system (suspend/resume). + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@57 { + compatible = "realtek,rt5514"; + reg = <0x57>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5631.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5631.yaml new file mode 100644 index 000000000000..747a731c44c9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt5631.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5631.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ALC5631/RT5631 audio CODEC + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +description: | + This device supports I2C only. + + Pins on the device (for linking into audio routes): + * SPK_OUT_R_P + * SPK_OUT_R_N + * SPK_OUT_L_P + * SPK_OUT_L_N + * HP_OUT_L + * HP_OUT_R + * AUX_OUT2_LP + * AUX_OUT2_RN + * AUX_OUT1_LP + * AUX_OUT1_RN + * AUX_IN_L_JD + * AUX_IN_R_JD + * MONO_IN_P + * MONO_IN_N + * MIC1_P + * MIC1_N + * MIC2_P + * MIC2_N + * MONO_OUT_P + * MONO_OUT_N + * MICBIAS1 + * MICBIAS2 + +properties: + compatible: + enum: + - realtek,alc5631 + - realtek,rt5631 + + reg: + maxItems: 1 + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "realtek,alc5631"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml new file mode 100644 index 000000000000..13f09f1bc800 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5645.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT5650/RT5645 audio CODEC + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +description: | + This device supports I2C only. + + Pins on the device (for linking into audio routes) for RT5645/RT5650: + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * Haptic Generator + * HPOL + * HPOR + * LOUTL + * LOUTR + * PDM1L + * PDM1R + * SPOL + * SPOR + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - realtek,rt5645 + - realtek,rt5650 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: The CODEC's interrupt output. + + avdd-supply: + description: Power supply for AVDD, providing 1.8V. + + cpvdd-supply: + description: Power supply for CPVDD, providing 3.5V. + + hp-detect-gpios: + description: + A GPIO spec for the external headphone detect pin. If jd-mode = 0, we + will get the JD status by getting the value of hp-detect-gpios. + maxItems: 1 + + cbj-sleeve-gpios: + description: + A GPIO spec to control the external combo jack circuit to tie the + sleeve/ring2 contacts to the ground or floating. It could avoid some + electric noise from the active speaker jacks. + maxItems: 1 + + realtek,in2-differential: + description: + Indicate MIC2 input are differential, rather than single-ended. + type: boolean + + realtek,dmic1-data-pin: + description: Specify which pin to be used as DMIC1 data pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic1 is not used + - 1 # using IN2P pin as dmic1 data pin + - 2 # using GPIO6 pin as dmic1 data pin + - 3 # using GPIO10 pin as dmic1 data pin + - 4 # using GPIO12 pin as dmic1 data pin + + realtek,dmic2-data-pin: + description: Specify which pin to be used as DMIC2 data pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic2 is not used + - 1 # using IN2N pin as dmic2 data pin + - 2 # using GPIO5 pin as dmic2 data pin + - 3 # using GPIO11 pin as dmic2 data pin + + realtek,jd-mode: + description: The JD mode of rt5645/rt5650. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # rt5645/rt5650 JD function is not used + - 1 # Mode-0 (VDD=3.3V), two port jack detection + - 2 # Mode-1 (VDD=3.3V), one port jack detection + - 3 # Mode-2 (VDD=1.8V), one port jack detection + +required: + - compatible + - reg + - interrupts + - avdd-supply + - cpvdd-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + hp-detect-gpios = <&gpio 19 0>; + cbj-sleeve-gpios = <&gpio 20 0>; + interrupt-parent = <&gpio>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&avdd_reg>; + cpvdd-supply = <&cpvdd_supply>; + realtek,jd-mode = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml new file mode 100644 index 000000000000..1100ffd9a7c0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5659.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT5659/RT5658 audio CODEC + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +description: | + This device supports I2C only. + + Pins on the device (for linking into audio routes) for RT5659/RT5658: + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * IN3P + * IN3N + * IN4P + * IN4N + * HPOL + * HPOR + * SPOL + * SPOR + * LOUTL + * LOUTR + * MONOOUT + * PDML + * PDMR + * SPDIF + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - realtek,rt5659 + - realtek,rt5658 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + realtek,dmic1-data-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic1 is not used + - 1 # using IN2N pin as dmic1 data pin + - 2 # using GPIO5 pin as dmic1 data pin + - 3 # using GPIO9 pin as dmic1 data pin + - 4 # using GPIO11 pin as dmic1 data pin + description: Specify which pin to be used as DMIC1 data pin. + default: 0 + + realtek,dmic2-data-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic2 is not used + - 1 # using IN2P pin as dmic2 data pin + - 2 # using GPIO6 pin as dmic2 data pin + - 3 # using GPIO10 pin as dmic2 data pin + - 4 # using GPIO12 pin as dmic2 data pin + description: Specify which pin to be used as DMIC2 data pin. + default: 0 + + realtek,jd-src: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # No JD is used + - 1 # using JD3 as JD source + - 2 # JD source for Intel HDA header + description: Specify which JD source be used. + default: 0 + + realtek,ldo1-en-gpios: + maxItems: 1 + description: CODEC's LDO1_EN pin. + + realtek,reset-gpios: + maxItems: 1 + description: CODEC's RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1b { + compatible = "realtek,rt5659"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + realtek,ldo1-en-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5677.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5677.yaml new file mode 100644 index 000000000000..9ce23e58e5ea --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt5677.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5677.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT5677 audio CODEC + +maintainers: + - Animesh Agarwal <animeshagarwal28@gmail.com> + +description: | + This device supports I2C only. + + Pins on the device (for linking into audio routes): + * IN1P + * IN1N + * IN2P + * IN2N + * MICBIAS1 + * DMIC1 + * DMIC2 + * DMIC3 + * DMIC4 + * LOUT1 + * LOUT2 + * LOUT3 + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: realtek,rt5677 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + realtek,pow-ldo2-gpio: + maxItems: 1 + description: CODEC's POW_LDO2 pin. + + realtek,reset-gpio: + maxItems: 1 + description: CODEC's RESET pin. Active low. + + realtek,gpio-config: + description: | + Array of six 8bit elements that configures GPIO. + 0 - floating (reset value) + 1 - pull down + 2 - pull up + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 6 + items: + maximum: 2 + + realtek,jd1-gpio: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # OFF + - 1 # GPIO1 for jd1. + - 2 # GPIO2 for jd1. + - 3 # GPIO3 for jd1. + description: Configures GPIO Mic Jack detection 1. + + realtek,jd2-gpio: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # OFF + - 1 # GPIO4 for jd2. + - 2 # GPIO5 for jd2. + - 3 # GPIO6 for jd2. + description: Configures GPIO Mic Jack detection 2. + + realtek,jd3-gpio: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # OFF + - 1 # GPIO4 for jd3. + - 2 # GPIO5 for jd3. + - 3 # GPIO6 for jd3. + description: Configures GPIO Mic Jack detection 3. + +patternProperties: + '^realtek,in[1-2]-differential$': + type: boolean + description: Indicate MIC1/2 input are differential, rather than + single-ended. + + '^realtek,lout[1-3]-differential$': + type: boolean + description: Indicate LOUT1/2/3 outputs are differential, rather than + single-ended. + +required: + - compatible + - reg + - interrupts + - gpio-controller + - '#gpio-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@2c { + compatible = "realtek,rt5677"; + reg = <0x2c>; + interrupt-parent = <&gpio>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + realtek,pow-ldo2-gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; + realtek,reset-gpio = <&gpio 3 GPIO_ACTIVE_LOW>; + realtek,in1-differential; + realtek,gpio-config = <0 0 0 0 0 2>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt deleted file mode 100644 index d2cc171f22f2..000000000000 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ /dev/null @@ -1,37 +0,0 @@ -RT5514 audio CODEC - -This device supports both I2C and SPI. - -Required properties: - -- compatible : "realtek,rt5514". - -- reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Optional properties: - -- clocks: The phandle of the master clock to the CODEC -- clock-names: Should be "mclk" - -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. - -- realtek,dmic-init-delay-ms - Set the DMIC initial delay (ms) to wait it ready for I2C. - -Pins on the device (for linking into audio routes) for I2C: - - * DMIC1L - * DMIC1R - * DMIC2L - * DMIC2R - * AMICL - * AMICR - -Example: - -rt5514: codec@57 { - compatible = "realtek,rt5514"; - reg = <0x57>; -}; diff --git a/Documentation/devicetree/bindings/sound/rt5631.txt b/Documentation/devicetree/bindings/sound/rt5631.txt deleted file mode 100644 index 56bc85232c49..000000000000 --- a/Documentation/devicetree/bindings/sound/rt5631.txt +++ /dev/null @@ -1,48 +0,0 @@ -ALC5631/RT5631 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "realtek,alc5631" or "realtek,rt5631" - - - reg : the I2C address of the device. - -Pins on the device (for linking into audio routes): - - * SPK_OUT_R_P - * SPK_OUT_R_N - * SPK_OUT_L_P - * SPK_OUT_L_N - * HP_OUT_L - * HP_OUT_R - * AUX_OUT2_LP - * AUX_OUT2_RN - * AUX_OUT1_LP - * AUX_OUT1_RN - * AUX_IN_L_JD - * AUX_IN_R_JD - * MONO_IN_P - * MONO_IN_N - * MIC1_P - * MIC1_N - * MIC2_P - * MIC2_N - * MONO_OUT_P - * MONO_OUT_N - * MICBIAS1 - * MICBIAS2 - -Example: - -alc5631: audio-codec@1a { - compatible = "realtek,alc5631"; - reg = <0x1a>; -}; - -or - -rt5631: audio-codec@1a { - compatible = "realtek,rt5631"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt deleted file mode 100644 index c1fa379f5f3e..000000000000 --- a/Documentation/devicetree/bindings/sound/rt5645.txt +++ /dev/null @@ -1,82 +0,0 @@ -RT5650/RT5645 audio CODEC - -This device supports I2C only. - -Required properties: - -- compatible : One of "realtek,rt5645" or "realtek,rt5650". - -- reg : The I2C address of the device. - -- interrupts : The CODEC's interrupt output. - -- avdd-supply: Power supply for AVDD, providing 1.8V. - -- cpvdd-supply: Power supply for CPVDD, providing 3.5V. - -Optional properties: - -- hp-detect-gpios: - a GPIO spec for the external headphone detect pin. If jd-mode = 0, - we will get the JD status by getting the value of hp-detect-gpios. - -- cbj-sleeve-gpios: - a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2 - contacts to the ground or floating. It could avoid some electric noise from the - active speaker jacks. - -- realtek,in2-differential - Boolean. Indicate MIC2 input are differential, rather than single-ended. - -- realtek,dmic1-data-pin - 0: dmic1 is not used - 1: using IN2P pin as dmic1 data pin - 2: using GPIO6 pin as dmic1 data pin - 3: using GPIO10 pin as dmic1 data pin - 4: using GPIO12 pin as dmic1 data pin - -- realtek,dmic2-data-pin - 0: dmic2 is not used - 1: using IN2N pin as dmic2 data pin - 2: using GPIO5 pin as dmic2 data pin - 3: using GPIO11 pin as dmic2 data pin - --- realtek,jd-mode : The JD mode of rt5645/rt5650 - 0 : rt5645/rt5650 JD function is not used - 1 : Mode-0 (VDD=3.3V), two port jack detection - 2 : Mode-1 (VDD=3.3V), one port jack detection - 3 : Mode-2 (VDD=1.8V), one port jack detection - -Pins on the device (for linking into audio routes) for RT5645/RT5650: - - * DMIC L1 - * DMIC R1 - * DMIC L2 - * DMIC R2 - * IN1P - * IN1N - * IN2P - * IN2N - * Haptic Generator - * HPOL - * HPOR - * LOUTL - * LOUTR - * PDM1L - * PDM1R - * SPOL - * SPOR - -Example: - -codec: rt5650@1a { - compatible = "realtek,rt5650"; - reg = <0x1a>; - hp-detect-gpios = <&gpio 19 0>; - cbj-sleeve-gpios = <&gpio 20 0>; - interrupt-parent = <&gpio>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - realtek,dmic-en = "true"; - realtek,en-jd-func = "true"; - realtek,jd-mode = <3>; -}; diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt deleted file mode 100644 index 8f3f62c0226a..000000000000 --- a/Documentation/devicetree/bindings/sound/rt5659.txt +++ /dev/null @@ -1,89 +0,0 @@ -RT5659/RT5658 audio CODEC - -This device supports I2C only. - -Required properties: - -- compatible : One of "realtek,rt5659" or "realtek,rt5658". - -- reg : The I2C address of the device. - -- interrupts : The CODEC's interrupt output. - -Optional properties: - -- clocks: The phandle of the master clock to the CODEC -- clock-names: Should be "mclk" - -- realtek,in1-differential -- realtek,in3-differential -- realtek,in4-differential - Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended. - -- realtek,dmic1-data-pin - 0: dmic1 is not used - 1: using IN2N pin as dmic1 data pin - 2: using GPIO5 pin as dmic1 data pin - 3: using GPIO9 pin as dmic1 data pin - 4: using GPIO11 pin as dmic1 data pin - -- realtek,dmic2-data-pin - 0: dmic2 is not used - 1: using IN2P pin as dmic2 data pin - 2: using GPIO6 pin as dmic2 data pin - 3: using GPIO10 pin as dmic2 data pin - 4: using GPIO12 pin as dmic2 data pin - -- realtek,jd-src - 0: No JD is used - 1: using JD3 as JD source - 2: JD source for Intel HDA header - -- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. -- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin. - -- sound-name-prefix: Please refer to dai-common.yaml - -- ports: A Codec may have a single or multiple I2S interfaces. These - interfaces on Codec side can be described under 'ports' or 'port'. - When the SoC or host device is connected to multiple interfaces of - the Codec, the connectivity can be described using 'ports' property. - If a single interface is used, then 'port' can be used. The usage - depends on the platform or board design. - Please refer to Documentation/devicetree/bindings/graph.txt - -Pins on the device (for linking into audio routes) for RT5659/RT5658: - - * DMIC L1 - * DMIC R1 - * DMIC L2 - * DMIC R2 - * IN1P - * IN1N - * IN2P - * IN2N - * IN3P - * IN3N - * IN4P - * IN4N - * HPOL - * HPOR - * SPOL - * SPOR - * LOUTL - * LOUTR - * MONOOUT - * PDML - * PDMR - * SPDIF - -Example: - -rt5659 { - compatible = "realtek,rt5659"; - reg = <0x1b>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; - realtek,ldo1-en-gpios = - <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt deleted file mode 100644 index da2430099181..000000000000 --- a/Documentation/devicetree/bindings/sound/rt5677.txt +++ /dev/null @@ -1,78 +0,0 @@ -RT5677 audio CODEC - -This device supports I2C only. - -Required properties: - -- compatible : "realtek,rt5677". - -- reg : The I2C address of the device. - -- interrupts : The CODEC's interrupt output. - -- gpio-controller : Indicates this device is a GPIO controller. - -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - -Optional properties: - -- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin. -- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low. - -- realtek,in1-differential -- realtek,in2-differential -- realtek,lout1-differential -- realtek,lout2-differential -- realtek,lout3-differential - Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential, - rather than single-ended. - -- realtek,gpio-config - Array of six 8bit elements that configures GPIO. - 0 - floating (reset value) - 1 - pull down - 2 - pull up - -- realtek,jd1-gpio - Configures GPIO Mic Jack detection 1. - Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively. - -- realtek,jd2-gpio -- realtek,jd3-gpio - Configures GPIO Mic Jack detection 2 and 3. - Select 0 ~ 3 as OFF, GPIO4, GPIO5 and GPIO6 respectively. - -Pins on the device (for linking into audio routes): - - * IN1P - * IN1N - * IN2P - * IN2N - * MICBIAS1 - * DMIC1 - * DMIC2 - * DMIC3 - * DMIC4 - * LOUT1 - * LOUT2 - * LOUT3 - -Example: - -rt5677 { - compatible = "realtek,rt5677"; - reg = <0x2c>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; - - gpio-controller; - #gpio-cells = <2>; - - realtek,pow-ldo2-gpio = - <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; - realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>; - realtek,in1-differential = "true"; - realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */ - realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */ -}; diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml index 6ec80f529d84..69ddfd4afdcd 100644 --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml @@ -53,6 +53,9 @@ properties: submic-bias-supply: description: Supply for the micbias on the Sub microphone + headset-mic-bias-supply: + description: Supply for the micbias on the Headset microphone + fm-sel-gpios: maxItems: 1 description: GPIO pin for FM selection @@ -61,6 +64,36 @@ properties: maxItems: 1 description: GPIO pin for line out selection + headset-detect-gpios: + maxItems: 1 + description: GPIO for detection of headset insertion + + headset-key-gpios: + maxItems: 1 + description: GPIO for detection of headset key press + + io-channels: + maxItems: 1 + description: IO channel to read micbias voltage for headset detection + + io-channel-names: + const: headset-detect + + samsung,headset-4pole-threshold-microvolt: + minItems: 2 + maxItems: 2 + description: + Array containing minimum and maximum IO channel value for 4-pole + (with microphone/button) headsets. If the IO channel value is + outside of this range, a 3-pole headset is assumed. + + samsung,headset-button-threshold-microvolt: + minItems: 3 + maxItems: 3 + description: | + Array of minimum (inclusive) IO channel values for headset button + detection, in order: "Media", "Volume Up" and "Volume Down". + required: - compatible - cpu diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml index 9f319caf3db7..194ac1d4f4f5 100644 --- a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml +++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml @@ -24,6 +24,11 @@ properties: description: | GPIOs used to select the input line. + state-labels: + description: State of input line. default is "Input 1", "Input 2" + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 2 + sound-name-prefix: true required: @@ -37,4 +42,5 @@ examples: mux { compatible = "simple-audio-mux"; mux-gpios = <&gpio 3 0>; + state-labels = "Label_A", "Label_B"; }; diff --git a/Documentation/devicetree/bindings/sound/spdif-receiver.txt b/Documentation/devicetree/bindings/sound/spdif-receiver.txt deleted file mode 100644 index 80f807bf8a1d..000000000000 --- a/Documentation/devicetree/bindings/sound/spdif-receiver.txt +++ /dev/null @@ -1,10 +0,0 @@ -Device-Tree bindings for dummy spdif receiver - -Required properties: - - compatible: should be "linux,spdif-dir". - -Example node: - - codec: spdif-receiver { - compatible = "linux,spdif-dir"; - }; diff --git a/Documentation/devicetree/bindings/sound/tas571x.txt b/Documentation/devicetree/bindings/sound/tas571x.txt deleted file mode 100644 index 1addc75989d5..000000000000 --- a/Documentation/devicetree/bindings/sound/tas571x.txt +++ /dev/null @@ -1,49 +0,0 @@ -Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers - -The codec is controlled through an I2C interface. It also has two other -signals that can be wired up to GPIOs: reset (strongly recommended), and -powerdown (optional). - -Required properties: - -- compatible: should be one of the following: - - "ti,tas5707" - - "ti,tas5711", - - "ti,tas5717", - - "ti,tas5719", - - "ti,tas5721" - - "ti,tas5733" -- reg: The I2C address of the device -- #sound-dai-cells: must be equal to 0 - -Optional properties: - -- reset-gpios: GPIO specifier for the TAS571x's active low reset line -- pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line -- clocks: clock phandle for the MCLK input -- clock-names: should be "mclk" -- AVDD-supply: regulator phandle for the AVDD supply (all chips) -- DVDD-supply: regulator phandle for the DVDD supply (all chips) -- HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719) -- PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719) -- PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719) -- PVDD_A-supply: regulator phandle for the PVDD_A supply (5711) -- PVDD_B-supply: regulator phandle for the PVDD_B supply (5711) -- PVDD_C-supply: regulator phandle for the PVDD_C supply (5711) -- PVDD_D-supply: regulator phandle for the PVDD_D supply (5711) -- DRVDD-supply: regulator phandle for the DRVDD supply (5721) -- PVDD-supply: regulator phandle for the PVDD supply (5721) - -Example: - - tas5717: audio-codec@2a { - compatible = "ti,tas5717"; - reg = <0x2a>; - #sound-dai-cells = <0>; - - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - - clocks = <&clk_core CLK_I2S>; - clock-names = "mclk"; - }; diff --git a/Documentation/devicetree/bindings/sound/ti,omap4-mcpdm.yaml b/Documentation/devicetree/bindings/sound/ti,omap4-mcpdm.yaml new file mode 100644 index 000000000000..cdea0a00826a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,omap4-mcpdm.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,omap4-mcpdm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP McPDM + +maintainers: + - Misael Lopez Cruz <misael.lopez@ti.com> + +description: + OMAP ALSA SoC DAI driver using McPDM port used by TWL6040 + +properties: + compatible: + const: ti,omap4-mcpdm + + reg: + items: + - description: MPU access base address + - description: L3 interconnect address + + reg-names: + items: + - const: mpu + - const: dma + + interrupts: + maxItems: 1 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: up_link + - const: dn_link + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pdmclk + +required: + - compatible + - reg + - reg-names + - interrupts + - dmas + - dma-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + mcpdm@0 { + compatible = "ti,omap4-mcpdm"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + dmas = <&sdma 65>, <&sdma 66>; + dma-names = "up_link", "dn_link"; + clocks = <&twl6040>; + clock-names = "pdmclk"; + }; diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml index d28c102c0ce7..8bc3b0c7531e 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas2562.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas2562.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2562 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml index be2536e8c440..362c2e6154f0 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019-20 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas2770.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas2770.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2770 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml index f2d878f6f495..530bc3937847 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2020-2022 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas27xx.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas27xx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2764/TAS2780 Smart PA diff --git a/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml new file mode 100644 index 000000000000..2f917238db95 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas57xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - ti,tas5707 + - ti,tas5711 + - ti,tas5717 + - ti,tas5719 + - ti,tas5721 + - ti,tas5733 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO for the active low reset line + + pdn-gpios: + maxItems: 1 + description: GPIO for the active low powerdown line + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + AVDD-supply: true + DVDD-supply: true + HPVDD-supply: true + PVDD_AB-supply: true + PVDD_CD-supply: true + PVDD_A-supply: true + PVDD_B-supply: true + PVDD_C-supply: true + PVDD_D-supply: true + DRVDD-supply: true + PVDD-supply: true + + '#sound-dai-cells': + const: 0 + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - '#sound-dai-cells' + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,tas5717 + - ti,tas5719 + then: + properties: + PVDD_A-supply: false + PVDD_B-supply: false + PVDD_C-supply: false + PVDD_D-supply: false + DRVDD-supply: false + PVDD-supply: false + + - if: + properties: + compatible: + contains: + enum: + - ti,tas5711 + then: + properties: + HPVDD-supply: false + PVDD_AB-supply: false + PVDD_CD-supply: false + DRVDD-supply: false + PVDD-supply: false + + - if: + properties: + compatible: + contains: + enum: + - ti,tas5721 + then: + properties: + HPVDD-supply: false + PVDD_AB-supply: false + PVDD_CD-supply: false + PVDD_A-supply: false + PVDD_B-supply: false + PVDD_C-supply: false + PVDD_D-supply: false + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@2a { + compatible = "ti,tas5717"; + reg = <0x2a>; + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 15 0>; + pdn-gpios = <&gpio1 15 0>; + AVDD-supply = <&avdd_supply>; + DVDD-supply = <&dvdd_supply>; + HPVDD-supply = <&hpvdd_supply>; + PVDD_AB-supply = <&pvdd_ab_supply>; + PVDD_CD-supply = <&pvdd_cd_supply>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/tas5805m.yaml b/Documentation/devicetree/bindings/sound/ti,tas5805m.yaml index 12c41974274e..c2c2835a9e1d 100644 --- a/Documentation/devicetree/bindings/sound/tas5805m.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas5805m.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas5805m.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas5805m.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: TAS5805M audio amplifier diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml index ede14ca2c07a..66b76656229f 100644 --- a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml @@ -58,8 +58,8 @@ properties: description: | Configuration for DMDIN/GPIO1 pin. - When ADC3XXX_GPIO_GPO is configured, this causes corresponding the - ALSA control "GPIOx Output" to appear, as a switch control. + When ADC3XXX_GPIO_GPO is selected, the pin may be controlled via the + GPIO framework, as pin number 0 on the device. ti,dmclk-gpio2: $ref: /schemas/types.yaml#/definitions/uint32 @@ -76,12 +76,32 @@ properties: description: | Configuration for DMCLK/GPIO2 pin. - When ADC3XXX_GPIO_GPO is configured, this causes corresponding the - ALSA control "GPIOx Output" to appear, as a switch control. + When ADC3XXX_GPIO_GPO is selected, the pin may be controlled via the + GPIO framework, as pin number 1 on the device. Note that there is currently no support for reading the GPIO pins as inputs. + ti,micbias1-gpo: + type: boolean + description: | + When set, the MICBIAS1 pin may be controlled via the GPIO framework, + as pin number 3 on the device. + + In this mode, when the pin is activated, it will be set to the voltage + specified by the ti,micbias1-vg property. When deactivated, the pin will + float. + + ti,micbias2-gpo: + type: boolean + description: | + When set, the MICBIAS2 pin may be controlled via the GPIO framework, + as pin number 4 on the device. + + In this mode, when the pin is activated, it will be set to the voltage + specified by the ti,micbias2-vg property. When deactivated, the pin will + float. + ti,micbias1-vg: $ref: /schemas/types.yaml#/definitions/uint32 enum: @@ -104,6 +124,10 @@ properties: description: | Mic bias voltage output on MICBIAS2 pin +dependencies: + ti,micbias1-gpo: ['ti,micbias1-vg'] + ti,micbias2-gpo: ['ti,micbias2-vg'] + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml index f3274bcc4c05..876fa97bfbcd 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$id: http://devicetree.org/schemas/sound/ti,tlv320adcx140.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter diff --git a/Documentation/devicetree/bindings/sound/wm8750.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml index 24246ac7bbdf..96859e38315b 100644 --- a/Documentation/devicetree/bindings/sound/wm8750.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/wm8750.yaml# +$id: http://devicetree.org/schemas/sound/wlf,wm8750.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: WM8750 and WM8987 audio CODECs diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8782.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8782.yaml new file mode 100644 index 000000000000..d0bbdc9f9ced --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8782.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8782.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson Microelectromics WM8782 audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: wlf,wm8782 + + Vdda-supply: + description: Regulator for the analog power supply (2.7V - 5.5V) + + Vdd-supply: + description: Regulator for the digital power supply (2.7V - 3.6V) + + wlf,fsampen: + description: FSAMPEN pin value, 0 for low, 1 for high, 2 for disconnected. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - Vdda-supply + - Vdd-supply + +unevaluatedProperties: false + +examples: + - | + wm8782: codec { + compatible = "wlf,wm8782"; + Vdda-supply = <&vdda_supply>; + Vdd-supply = <&vdd_supply>; + wlf,fsampen = <2>; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8804.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8804.yaml new file mode 100644 index 000000000000..3c060179f06e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8804.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8804.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WM8804 audio codec + +description: | + This device supports both I2C and SPI (configured with pin strapping on the + board). + +maintainers: + - patches@opensource.cirrus.com + +properties: + compatible: + const: wlf,wm8804 + + reg: + description: + The I2C address of the device for I2C, the chip select number for SPI. + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + PVDD-supply: + description: PLL core supply + + DVDD-supply: + description: Digital core supply + + wlf,reset-gpio: + description: A GPIO specifier for the GPIO controlling the reset pin. + maxItems: 1 + +required: + - reg + - compatible + - PVDD-supply + - DVDD-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "wlf,wm8804"; + reg = <0x1a>; + PVDD-supply = <&pvdd_reg>; + DVDD-supply = <&dvdd_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8782.txt b/Documentation/devicetree/bindings/sound/wm8782.txt deleted file mode 100644 index 1a28f3280972..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8782.txt +++ /dev/null @@ -1,24 +0,0 @@ -WM8782 stereo ADC - -This device does not have any control interface or reset pins. - -Required properties: - - - compatible : "wlf,wm8782" - - Vdda-supply : phandle to a regulator for the analog power supply (2.7V - 5.5V) - - Vdd-supply : phandle to a regulator for the digital power supply (2.7V - 3.6V) - -Optional properties: - - - wlf,fsampen: - FSAMPEN pin value, 0 for low, 1 for high, 2 for disconnected. - Defaults to 0 if left unspecified. - -Example: - -wm8782: stereo-adc { - compatible = "wlf,wm8782"; - Vdda-supply = <&vdda_supply>; - Vdd-supply = <&vdd_supply>; - wlf,fsampen = <2>; /* 192KHz */ -}; diff --git a/Documentation/devicetree/bindings/sound/wm8804.txt b/Documentation/devicetree/bindings/sound/wm8804.txt deleted file mode 100644 index 2c1641c17a91..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8804.txt +++ /dev/null @@ -1,25 +0,0 @@ -WM8804 audio CODEC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8804" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - - - PVDD-supply, DVDD-supply : Power supplies for the device, as covered - in Documentation/devicetree/bindings/regulator/regulator.txt - -Optional properties: - - - wlf,reset-gpio: A GPIO specifier for the GPIO controlling the reset pin - -Example: - -wm8804: codec@1a { - compatible = "wlf,wm8804"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/spi/amlogic,a1-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,a1-spifc.yaml index ea47d30eef43..043879b434ac 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,a1-spifc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,a1-spifc.yaml @@ -23,6 +23,9 @@ properties: clocks: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml index 32e7c14033c2..d29772994cf5 100644 --- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -18,10 +18,10 @@ properties: oneOf: - const: atmel,at91rm9200-spi - items: - - const: microchip,sam9x60-spi - - const: atmel,at91rm9200-spi - - items: - - const: microchip,sam9x7-spi + - enum: + - microchip,sam9x60-spi + - microchip,sam9x7-spi + - microchip,sama7d65-spi - const: atmel,at91rm9200-spi reg: diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt deleted file mode 100644 index 3d55dd64b1be..000000000000 --- a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt +++ /dev/null @@ -1,23 +0,0 @@ -Broadcom BCM2835 SPI0 controller - -The BCM2835 contains two forms of SPI master controller, one known simply as -SPI0, and the other known as the "Universal SPI Master"; part of the -auxiliary block. This binding applies to the SPI0 controller. - -Required properties: -- compatible: Should be one of "brcm,bcm2835-spi" for BCM2835/2836/2837 or - "brcm,bcm2711-spi" for BCM2711 or "brcm,bcm7211-spi" for BCM7211. -- reg: Should contain register location and length. -- interrupts: Should contain interrupt. -- clocks: The clock feeding the SPI controller. - -Example: - -spi@20204000 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204000 0x1000>; - interrupts = <2 22>; - clocks = <&clk_spi>; - #address-cells = <1>; - #size-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.yaml new file mode 100644 index 000000000000..94da68792194 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/brcm,bcm2835-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 SPI0 controller + +maintainers: + - Florian Fainelli <florian.fainelli@broadcom.com> + - Kanak Shilledar <kanakshilledar111@protonmail.com> + - Stefan Wahren <wahrenst@gmx.net> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + enum: + - brcm,bcm2835-spi + - brcm,bcm2711-spi + - brcm,bcm7211-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + spi@20204000 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204000 0x1000>; + interrupts = <2 22>; + clocks = <&clk_spi>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/fsl,dspi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/fsl,dspi-peripheral-props.yaml new file mode 100644 index 000000000000..9b62b75e17a7 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/fsl,dspi-peripheral-props.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/fsl,dspi-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for Freescale DSPI controller + +maintainers: + - Vladimir Oltean <olteanv@gmail.com> + +description: + See spi-peripheral-props.yaml for more info. + +properties: + fsl,spi-cs-sck-delay: + deprecated: true + description: + Delay in nanoseconds between activating chip select and the start of + clock signal, at the start of a transfer. + $ref: /schemas/types.yaml#/definitions/uint32 + + fsl,spi-sck-cs-delay: + deprecated: true + description: + Delay in nanoseconds between stopping the clock signal and + deactivating chip select, at the end of a transfer. + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/fsl,dspi.yaml b/Documentation/devicetree/bindings/spi/fsl,dspi.yaml new file mode 100644 index 000000000000..7ca8fceda717 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/fsl,dspi.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/fsl,dspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Freescale DSPI controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,vf610-dspi + - fsl,ls1021a-v1.0-dspi + - fsl,ls1012a-dspi + - fsl,ls1028a-dspi + - fsl,ls1043a-dspi + - fsl,ls1046a-dspi + - fsl,ls1088a-dspi + - fsl,ls2080a-dspi + - fsl,ls2085a-dspi + - fsl,lx2160a-dspi + - items: + - enum: + - fsl,ls1012a-dspi + - fsl,ls1028a-dspi + - fsl,ls1043a-dspi + - fsl,ls1046a-dspi + - fsl,ls1088a-dspi + - const: fsl,ls1021a-v1.0-dspi + - items: + - const: fsl,ls2080a-dspi + - const: fsl,ls2085a-dspi + - items: + - const: fsl,lx2160a-dspi + - const: fsl,ls2085a-dspi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dspi + + dmas: + items: + - description: DMA controller phandle and request line for TX + - description: DMA controller phandle and request line for RX + + dma-names: + items: + - const: tx + - const: rx + + spi-num-chipselects: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The number of the chip native chipselect signals. + cs-gpios don't count against this number. + + big-endian: true + + bus-num: + $ref: /schemas/types.yaml#/definitions/uint32 + description: SoC-specific identifier for the SPI controller. + +required: + - compatible + - reg + - clocks + - clock-names + - spi-num-chipselects + +allOf: + - $ref: spi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/vf610-clock.h> + + spi@4002c000 { + compatible = "fsl,vf610-dspi"; + reg = <0x4002c000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DSPI0>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0_1>; + big-endian; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + spi-cs-setup-delay-ns = <100>; + spi-cs-hold-delay-ns = <50>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml b/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml new file mode 100644 index 000000000000..d7fec4c3a801 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/ibm,spi-fsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM FSI-attached SPI Controller + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + A SPI controller found on IBM Power processors, accessed over FSI from a + service processor. This node will always be a child node of an ibm,fsi2spi + node. + +properties: + compatible: + enum: + - ibm,spi-fsi + + reg: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - $ref: spi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + fsi { + #address-cells = <1>; + #size-cells = <0>; + + spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + size = <0x80000>; + address-width = <24>; + pagesize = <256>; + spi-max-frequency = <1000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml index 5f4f6b5615d0..0a1bada8f800 100644 --- a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml +++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml @@ -10,12 +10,17 @@ title: PXA2xx SSP SPI Controller maintainers: - Lubomir Rintel <lkundrak@v3.sk> -allOf: - - $ref: spi-controller.yaml# - properties: compatible: - const: marvell,mmp2-ssp + enum: + - marvell,mmp2-ssp + - mrvl,ce4100-ssp + - mvrl,pxa168-ssp + - mrvl,pxa25x-ssp + - mvrl,pxa25x-nssp + - mrvl,pxa27x-ssp + - mrvl,pxa3xx-ssp + - mrvl,pxa910-ssp interrupts: maxItems: 1 @@ -26,6 +31,16 @@ properties: clocks: maxItems: 1 + dmas: + items: + - description: Receive DMA + - description: Transmit DMA + + dma-names: + items: + - const: rx + - const: tx + ready-gpios: description: | GPIO used to signal a SPI master that the FIFO is filled and we're @@ -41,6 +56,18 @@ required: dependencies: ready-gpios: [ spi-slave ] +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + const: marvell,mmp2-ssp + then: + properties: + dmas: false + dma-names: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml index 74a817cc7d94..ffa8d1b48f8b 100644 --- a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml +++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml @@ -13,9 +13,6 @@ description: maintainers: - Conor Dooley <conor.dooley@microchip.com> -allOf: - - $ref: spi-controller.yaml# - properties: compatible: oneOf: @@ -43,6 +40,32 @@ required: - interrupts - clocks +allOf: + - $ref: spi-controller.yaml# + + - if: + properties: + compatible: + contains: + const: microchip,mpfs-spi + then: + properties: + num-cs: + default: 1 + + - if: + properties: + compatible: + contains: + const: microchip,mpfs-spi + not: + required: + - cs-gpios + then: + properties: + num-cs: + maximum: 1 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index fde3776a558b..bccd00a1ddd0 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -88,6 +88,10 @@ properties: - renesas,r9a06g032-spi # RZ/N1D - renesas,r9a06g033-spi # RZ/N1S - const: renesas,rzn1-spi # RZ/N1 + - description: T-HEAD TH1520 SoC SPI Controller + items: + - const: thead,th1520-spi + - const: snps,dw-apb-ssi reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index d4b61b0e8301..8de96abe9da1 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -55,6 +55,13 @@ properties: label: description: Descriptive name of the SPI controller. + resets: + maxItems: 1 + + reset-names: + items: + - const: spi + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt deleted file mode 100644 index 30a79da9c039..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ /dev/null @@ -1,65 +0,0 @@ -ARM Freescale DSPI controller - -Required properties: -- compatible : must be one of: - "fsl,vf610-dspi", - "fsl,ls1021a-v1.0-dspi", - "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), - "fsl,ls1028a-dspi", - "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), - "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), - "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), - "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"), - "fsl,ls2085a-dspi", - "fsl,lx2160a-dspi", -- reg : Offset and length of the register set for the device -- interrupts : Should contain SPI controller interrupt -- clocks: from common clock binding: handle to dspi clock. -- clock-names: from common clock binding: Shall be "dspi". -- pinctrl-0: pin control group to be used for this controller. -- pinctrl-names: must contain a "default" entry. -- spi-num-chipselects : the number of the chipselect signals. - -Optional property: -- big-endian: If present the dspi device's registers are implemented - in big endian mode. -- bus-num : the slave chip chipselect signal number. - -Optional SPI slave node properties: -- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip - select and the start of clock signal, at the start of a transfer. -- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock - signal and deactivating chip select, at the end of a transfer. - -Example: - -dspi0@4002c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,vf610-dspi"; - reg = <0x4002c000 0x1000>; - interrupts = <0 67 0x04>; - clocks = <&clks VF610_CLK_DSPI0>; - clock-names = "dspi"; - spi-num-chipselects = <5>; - bus-num = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dspi0_1>; - big-endian; - - sflash: at26df081a@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at26df081a"; - spi-max-frequency = <16000000>; - spi-cpol; - spi-cpha; - reg = <0>; - linux,modalias = "m25p80"; - modal = "at26df081a"; - fsl,spi-cs-sck-delay = <100>; - fsl,spi-sck-cs-delay = <50>; - }; -}; - - diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 2ff174244795..ed1d4aa41b8c 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Low Power SPI (LPSPI) for i.MX maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> allOf: - $ref: /schemas/spi/spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 15938f81fdce..0bb443b8decd 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -122,6 +122,7 @@ properties: allOf: - $ref: arm,pl022-peripheral-props.yaml# - $ref: cdns,qspi-nor-peripheral-props.yaml# + - $ref: fsl,dspi-peripheral-props.yaml# - $ref: samsung,spi-peripheral-props.yaml# - $ref: nvidia,tegra210-quad-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index a55c8633c32c..76e43c0ce36c 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -42,7 +42,7 @@ properties: dmas: description: | DMA specifiers for tx and rx dma. DMA fifo mode must be used. See - the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml. + the STM32 DMA controllers bindings Documentation/devicetree/bindings/dma/stm32/*.yaml. items: - description: rx DMA channel - description: tx DMA channel diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index cf07b8f787a6..d9322704f358 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -56,6 +56,9 @@ properties: ranges: true patternProperties: + "^regulators@[0-9a-f]+$": + $ref: /schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml# + "^sram@[a-f0-9]+": $ref: /schemas/sram/sram.yaml# unevaluatedProperties: false @@ -130,3 +133,28 @@ examples: }; }; }; + + - | + syscon@3000000 { + compatible = "allwinner,sun20i-d1-system-control"; + reg = <0x3000000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + regulators@3000150 { + compatible = "allwinner,sun20i-d1-system-ldos"; + reg = <0x3000150 0x4>; + + reg_ldoa: ldoa { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_ldob: ldob { + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml index 8025a852bc9c..faef3d6e0a94 100644 --- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml @@ -22,6 +22,7 @@ properties: - qcom,msm8974-imem - qcom,qcs404-imem - qcom,qdu1000-imem + - qcom,sa8775p-imem - qcom,sc7180-imem - qcom,sc7280-imem - qcom,sdm630-imem diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index 6b3aea6d73b0..dad8de900495 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -10,6 +10,8 @@ maintainers: - Vasily Khoruzhick <anarsoul@gmail.com> - Yangtao Li <tiny.windzz@gmail.com> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -55,7 +57,6 @@ properties: maxItems: 1 description: phandle to device controlling temperate offset SYS_CFG register - # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": enum: - 0 @@ -135,9 +136,8 @@ required: - compatible - reg - interrupts - - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml index 01fccdfc4178..725303e1a364 100644 --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -11,6 +11,8 @@ maintainers: description: Binding for Amlogic Thermal +$ref: thermal-sensor.yaml# + properties: compatible: oneOf: @@ -44,17 +46,17 @@ required: - clocks - amlogic,ao-secure -additionalProperties: false +unevaluatedProperties: false examples: - | - cpu_temp: temperature-sensor@ff634800 { - compatible = "amlogic,g12a-cpu-thermal", - "amlogic,g12a-thermal"; - reg = <0xff634800 0x50>; - interrupts = <0x0 0x24 0x0>; - clocks = <&clk 164>; - #thermal-sensor-cells = <0>; - amlogic,ao-secure = <&sec_AO>; - }; + temperature-sensor@ff634800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0xff634800 0x50>; + interrupts = <0x0 0x24 0x0>; + clocks = <&clk 164>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml index 89a2c32c0ab2..29a9844e8b48 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml @@ -19,30 +19,30 @@ description: |+ Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml +$ref: thermal-sensor.yaml# + properties: compatible: const: brcm,bcm2711-thermal - # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": const: 0 required: - compatible - - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | - avs-monitor@7d5d2000 { - compatible = "brcm,bcm2711-avs-monitor", - "syscon", "simple-mfd"; - reg = <0x7d5d2000 0xf00>; - - thermal: thermal { - compatible = "brcm,bcm2711-thermal"; - #thermal-sensor-cells = <0>; - }; + avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; }; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml index 267a0f423504..081486b44382 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml @@ -42,15 +42,14 @@ additionalProperties: false required: - compatible - reg - - "#thermal-sensor-cells" examples: - | - thermal@f04d1500 { - compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; - reg = <0xf04d1500 0x28>; - interrupts = <0x6>; - interrupt-names = "tmon"; - interrupt-parent = <&avs_host_l2_intc>; - #thermal-sensor-cells = <0>; - }; + thermal@f04d1500 { + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; + reg = <0xf04d1500 0x28>; + interrupts = <0x6>; + interrupt-names = "tmon"; + interrupt-parent = <&avs_host_l2_intc>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml index 2b6026d9fbcf..ddf0f20e5285 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml @@ -34,7 +34,6 @@ required: - compatible - reg - clocks - - '#thermal-sensor-cells' examples: - | diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml index e02d04d4f71e..ceef318668bf 100644 --- a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml @@ -28,7 +28,6 @@ properties: required: - compatible - - '#thermal-sensor-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml b/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml index f1fc3b0d8608..12e6418dc24d 100644 --- a/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml @@ -15,6 +15,8 @@ description: sensor resistor. The voltage read across the sensor is mapped to temperature using voltage-temperature lookup table. +$ref: thermal-sensor.yaml# + properties: compatible: const: generic-adc-thermal @@ -44,11 +46,10 @@ properties: required: - compatible - - '#thermal-sensor-cells' - io-channels - io-channel-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml b/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml new file mode 100644 index 000000000000..11aca2b749d7 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/hisilicon,tsensor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Temperature Sensor on HiSilicon SoCs + +maintainers: + - Abdulrasaq Lawani <abdulrasaqolawani@gmail.com> + +allOf: + - $ref: thermal-sensor.yaml + +properties: + compatible: + enum: + - hisilicon,tsensor + - hisilicon,hi3660-tsensor + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: thermal_clk + + interrupts: + maxItems: 1 + + '#thermal-sensor-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#thermal-sensor-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/hi6220-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + temperature-sensor@f7030700 { + compatible = "hisilicon,tsensor"; + reg = <0xf7030700 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; + clock-names = "thermal_clk"; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt deleted file mode 100644 index 4b19d80e6558..000000000000 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ /dev/null @@ -1,32 +0,0 @@ -* Temperature Sensor on hisilicon SoCs - -** Required properties : - -- compatible: "hisilicon,tsensor". -- reg: physical base address of thermal sensor and length of memory mapped - region. -- interrupt: The interrupt number to the cpu. Defines the interrupt used - by /SOCTHERM/tsensor. -- clock-names: Input clock name, should be 'thermal_clk'. -- clocks: phandles for clock specified in "clock-names" property. -- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. - -Example : - -for Hi6220: - tsensor: tsensor@0,f7030700 { - compatible = "hisilicon,tsensor"; - reg = <0x0 0xf7030700 0x0 0x1000>; - interrupts = <0 7 0x4>; - clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; - clock-names = "thermal_clk"; - #thermal-sensor-cells = <1>; - } - -for Hi3660: - tsensor: tsensor@fff30000 { - compatible = "hisilicon,hi3660-tsensor"; - reg = <0x0 0xfff30000 0x0 0x1000>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - #thermal-sensor-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml index 808d987bd8d1..337560562337 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml @@ -8,7 +8,6 @@ title: NXP i.MX Thermal maintainers: - Shawn Guo <shawnguo@kernel.org> - - Anson Huang <Anson.Huang@nxp.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml index d2c1e4573c32..bef0e95e7416 100644 --- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP i.MX8M Mini Thermal maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> description: | i.MX8MM has TMU IP to allow temperature measurement, there are @@ -16,6 +18,8 @@ description: | for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has 2 sensors. +$ref: thermal-sensor.yaml# + properties: compatible: oneOf: @@ -51,9 +55,8 @@ required: - compatible - reg - clocks - - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml index ca81c8afba79..79e691b08341 100644 --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml @@ -38,7 +38,6 @@ required: - compatible - reg - interrupts - - '#thermal-sensor-cells' if: properties: diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml index 331cf4e662e3..0259cd3ce9c5 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml @@ -99,7 +99,6 @@ required: - resets - nvmem-cells - nvmem-cell-names - - "#thermal-sensor-cells" additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml index b0237d236021..19bb1f324183 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml @@ -197,7 +197,6 @@ required: - clock-names - resets - reset-names - - "#thermal-sensor-cells" allOf: - $ref: thermal-sensor.yaml diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml index c91fd07e4061..978b9e6ab8a3 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml @@ -20,11 +20,7 @@ description: | node. See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP binding. - This node represents a thermal sensor. See - - Documentation/devicetree/bindings/thermal/thermal-sensor.yaml - - for details of the core thermal binding. +$ref: thermal-sensor.yaml# properties: compatible: @@ -33,10 +29,6 @@ properties: - nvidia,tegra194-bpmp-thermal '#thermal-sensor-cells': - $ref: /schemas/types.yaml#/definitions/uint32 - description: Number of cells needed in the phandle specifier to - identify a given sensor. Must be 1 and the single cell specifies - the sensor index. const: 1 -additionalProperties: false +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml index a35da257b070..63a29a1f7fe6 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml @@ -27,6 +27,8 @@ description: | TSENSOR has two channels which monitor two different spots of the SoC. +$ref: thermal-sensor.yaml# + properties: compatible: const: nvidia,tegra30-tsensor @@ -46,19 +48,14 @@ properties: "#thermal-sensor-cells": const: 1 - assigned-clock-parents: true - assigned-clock-rates: true - assigned-clocks: true - required: - compatible - reg - clocks - resets - interrupts - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml index 5f08b6e59b8a..30b22151aa82 100644 --- a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml @@ -42,7 +42,6 @@ required: - compatible - reg - interrupts - - '#thermal-sensor-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml index 7541e27704ca..bfad8130a042 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml @@ -8,6 +8,8 @@ title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring maintainers: - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +$ref: thermal-sensor.yaml# + properties: compatible: const: qcom,spmi-adc-tm-hc @@ -20,9 +22,6 @@ properties: "#thermal-sensor-cells": const: 1 - description: - Number of cells required to uniquely identify the thermal sensors. Since - we have multiple sensors this is set to 1 "#address-cells": const: 1 @@ -106,9 +105,8 @@ required: - interrupts - "#address-cells" - "#size-cells" - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index d9d2657287cb..4470a5942fb2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -8,6 +8,8 @@ title: Qualcomm's SPMI PMIC ADC Thermal Monitoring maintainers: - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -23,9 +25,6 @@ properties: "#thermal-sensor-cells": const: 1 - description: - Number of cells required to uniquely identify the thermal sensors. Since - we have multiple sensors this is set to 1 "#address-cells": const: 1 @@ -159,9 +158,8 @@ required: - interrupts - "#address-cells" - "#size-cells" - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 99d9c526c0b6..72048c5a0412 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -67,6 +67,7 @@ properties: - qcom,sm8450-tsens - qcom,sm8550-tsens - qcom,sm8650-tsens + - qcom,x1e80100-tsens - const: qcom,tsens-v2 - description: v2 of TSENS with combined interrupt @@ -217,18 +218,16 @@ properties: "#thermal-sensor-cells": const: 1 - description: - Number of cells required to uniquely identify the thermal sensors. Since - we have multiple sensors this is set to 1 required: - compatible - interrupts - interrupt-names - - "#thermal-sensor-cells" - "#qcom,sensors" allOf: + - $ref: thermal-sensor.yaml# + - if: properties: compatible: @@ -292,27 +291,21 @@ allOf: required: - reg -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - // Example msm9860 based SoC (ipq8064): - gcc: clock-controller { - - /* ... */ + thermal-sensor { + compatible = "qcom,ipq8064-tsens"; - tsens: thermal-sensor { - compatible = "qcom,ipq8064-tsens"; - - nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; - nvmem-cell-names = "calib", "calib_backup"; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <11>; - #thermal-sensor-cells = <1>; - }; + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; }; - | @@ -349,66 +342,66 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 1 (legacy: for pre v1 IP): tsens1: thermal-sensor@4a9000 { - compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "calib", "calib_sel"; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "calib", "calib_sel"; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <5>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 2 (for any platform containing v1 of the TSENS IP): tsens2: thermal-sensor@4a9000 { - compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; - reg = <0x004a9000 0x1000>, /* TM */ - <0x004a8000 0x1000>; /* SROT */ + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>; - nvmem-cell-names = "calib"; + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <10>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 3 (for any platform containing v2 of the TSENS IP): tsens3: thermal-sensor@c263000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc263000 0x1ff>, - <0xc222000 0x1ff>; + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, + <0xc222000 0x1ff>; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow", "critical"; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; - #qcom,sensors = <13>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 4 (for any IPQ8074 based SoC-s): tsens4: thermal-sensor@4a9000 { - compatible = "qcom,ipq8074-tsens"; - reg = <0x4a9000 0x1000>, - <0x4a8000 0x1000>; + compatible = "qcom,ipq8074-tsens"; + reg = <0x4a9000 0x1000>, + <0x4a8000 0x1000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "combined"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; - #qcom,sensors = <16>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; }; ... diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml index d155d6799da6..aa756dae512a 100644 --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml @@ -7,7 +7,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> + +$ref: thermal-sensor.yaml# properties: compatible: @@ -68,9 +72,8 @@ required: - interrupts - fsl,tmu-range - fsl,tmu-calibration - - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index 6a81cb6e11bc..b6657d64cf3d 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -15,6 +15,8 @@ description: maintainers: - Niklas Söderlund <niklas.soderlund@ragnatech.se> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -57,7 +59,6 @@ required: - clocks - power-domains - resets - - "#thermal-sensor-cells" if: properties: @@ -96,7 +97,7 @@ else: required: - interrupts -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -105,33 +106,33 @@ examples: #include <dt-bindings/power/r8a7795-sysc.h> tsc: thermal@e6198000 { - compatible = "renesas,r8a7795-thermal"; - reg = <0xe6198000 0x100>, - <0xe61a0000 0x100>, - <0xe61a8000 0x100>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <1>; + compatible = "renesas,r8a7795-thermal"; + reg = <0xe6198000 0x100>, + <0xe61a0000 0x100>, + <0xe61a8000 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; }; thermal-zones { - sensor_thermal: sensor-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 0>; - - trips { - sensor1_crit: sensor1-crit { - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + sensor_thermal: sensor-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; }; + }; }; - | #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> @@ -139,14 +140,14 @@ examples: #include <dt-bindings/power/r8a779a0-sysc.h> tsc_r8a779a0: thermal@e6190000 { - compatible = "renesas,r8a779a0-thermal"; - reg = <0xe6190000 0x200>, - <0xe6198000 0x200>, - <0xe61a0000 0x200>, - <0xe61a8000 0x200>, - <0xe61b0000 0x200>; - clocks = <&cpg CPG_MOD 919>; - power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 919>; - #thermal-sensor-cells = <1>; + compatible = "renesas,r8a779a0-thermal"; + reg = <0xe6190000 0x200>, + <0xe6198000 0x200>, + <0xe61a0000 0x200>, + <0xe61a8000 0x200>, + <0xe61b0000 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index 119998d10ff4..221a58d18cad 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -98,8 +98,8 @@ examples: # Example (non interrupt support) - | thermal@ffc48000 { - compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; - reg = <0xffc48000 0x38>; + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; }; # Example (interrupt support) @@ -109,12 +109,12 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> thermal@e61f0000 { - compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; - reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>, - <0xe61f0200 0x38>, <0xe61f0300 0x38>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; - power-domains = <&pd_c5>; + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; + reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>, + <0xe61f0200 0x38>, <0xe61f0300 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; + power-domains = <&pd_c5>; }; # Example (with thermal-zone) @@ -124,32 +124,32 @@ examples: #include <dt-bindings/power/r8a7790-sysc.h> thermal: thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; - reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <0>; + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; }; thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; - }; - }; - cooling-maps { - }; + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; }; + cooling-maps { + }; + }; }; diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml index 55f8ec0bec01..b717ea8261ca 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml @@ -9,6 +9,8 @@ title: Temperature Sensor ADC (TSADC) on Rockchip SoCs maintainers: - Heiko Stuebner <heiko@sntech.de> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -76,9 +78,8 @@ required: - clocks - clock-names - resets - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml index 03f4b926e53c..136589f5adee 100644 --- a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml @@ -13,6 +13,8 @@ description: maintainers: - Biju Das <biju.das.jz@bp.renesas.com> +$ref: thermal-sensor.yaml# + properties: compatible: items: @@ -43,36 +45,35 @@ required: - clocks - power-domains - resets - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/r9a07g044-cpg.h> tsu: thermal@10059400 { - compatible = "renesas,r9a07g044-tsu", - "renesas,rzg2l-tsu"; - reg = <0x10059400 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>; - resets = <&cpg R9A07G044_TSU_PRESETN>; - power-domains = <&cpg>; - #thermal-sensor-cells = <1>; + compatible = "renesas,r9a07g044-tsu", + "renesas,rzg2l-tsu"; + reg = <0x10059400 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>; + resets = <&cpg R9A07G044_TSU_PRESETN>; + power-domains = <&cpg>; + #thermal-sensor-cells = <1>; }; thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsu 0>; - - trips { - sensor_crit: sensor-crit { - temperature = <125000>; - hysteresis = <1000>; - type = "critical"; - }; - }; + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsu 0>; + + trips { + sensor_crit: sensor-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; }; + }; }; diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml index 1344df708e2d..29a08b0729ee 100644 --- a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml @@ -61,7 +61,8 @@ properties: TRIMINFO at 0x10068000 contains data for TMU channel 2 minItems: 1 - '#thermal-sensor-cells': true + '#thermal-sensor-cells': + const: 0 vtmu-supply: description: The regulator node supplying voltage to TMU. diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml index 6f975821fa5e..8210b7079721 100644 --- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml @@ -14,6 +14,8 @@ description: | maintainers: - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -38,9 +40,8 @@ properties: required: - compatible - interrupts - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml index 76aaa004c8ac..afa551f6185f 100644 --- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml @@ -11,6 +11,8 @@ maintainers: - Baolin Wang <baolin.wang7@gmail.com> - Chunyan Zhang <zhang.lyra@gmail.com> +$ref: thermal-sensor.yaml# + properties: compatible: const: sprd,ums512-thermal @@ -77,35 +79,34 @@ required: - clock-names - nvmem-cells - nvmem-cell-names - - "#thermal-sensor-cells" - "#address-cells" - "#size-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | - ap_thm0: thermal@32200000 { - compatible = "sprd,ums512-thermal"; - reg = <0x32200000 0x10000>; - clock-names = "enable"; - clocks = <&aonapb_gate 32>; - #thermal-sensor-cells = <1>; - nvmem-cells = <&thm0_sign>, <&thm0_ratio>; - nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal"; - #address-cells = <1>; - #size-cells = <0>; - - prometheus-sensor@0 { - reg = <0>; - nvmem-cells = <&thm0_sen0>; - nvmem-cell-names = "sen_delta_cal"; - }; - - ank-sensor@1 { - reg = <1>; - nvmem-cells = <&thm0_sen1>; - nvmem-cell-names = "sen_delta_cal"; - }; + thermal@32200000 { + compatible = "sprd,ums512-thermal"; + reg = <0x32200000 0x10000>; + clock-names = "enable"; + clocks = <&aonapb_gate 32>; + #thermal-sensor-cells = <1>; + nvmem-cells = <&thm0_sign>, <&thm0_ratio>; + nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal"; + #address-cells = <1>; + #size-cells = <0>; + + prometheus-sensor@0 { + reg = <0>; + nvmem-cells = <&thm0_sen0>; + nvmem-cell-names = "sen_delta_cal"; + }; + + ank-sensor@1 { + reg = <1>; + nvmem-cells = <&thm0_sen1>; + nvmem-cell-names = "sen_delta_cal"; }; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml index ab043084f667..1c01a80a0cdd 100644 --- a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml @@ -9,6 +9,8 @@ title: STMicroelectronics STM32 digital thermal sensor (DTS) maintainers: - Pascal Paillet <p.paillet@foss.st.com> +$ref: thermal-sensor.yaml# + properties: compatible: const: st,stm32-thermal @@ -30,14 +32,13 @@ properties: const: 0 required: - - "#thermal-sensor-cells" - compatible - reg - interrupts - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 68398e7e8655..0f435be1dbd8 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -49,7 +49,10 @@ properties: to take when the temperature crosses those thresholds. patternProperties: - "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$": + # Node name is limited in size due to Linux kernel requirements - 19 + # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL + # byte): + "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$": type: object description: Each thermal zone node contains information about how frequently it @@ -229,7 +232,6 @@ patternProperties: required: - thermal-sensors - - trips additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml index 7ed0abe9290f..c123d9070525 100644 --- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml @@ -9,6 +9,8 @@ title: Texas Instruments AM654 VTM (DTS) maintainers: - Keerthy <j-keerthy@ti.com> +$ref: thermal-sensor.yaml# + properties: compatible: const: ti,am654-vtm @@ -26,9 +28,8 @@ required: - compatible - reg - power-domains - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -46,11 +47,11 @@ examples: thermal-sensors = <&vtm0 0>; trips { - mpu0_crit: mpu0_crit { - temperature = <125000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml index 171b3622ed84..82b77b9795a3 100644 --- a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml @@ -22,6 +22,8 @@ description: | Temp(C) = (-9.2627e-12) * x^4 + (6.0373e-08) * x^3 + \ (-1.7058e-04) * x^2 + (3.2512e-01) * x + (-4.9003e+01) +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -64,9 +66,8 @@ required: - compatible - reg - power-domains - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml b/Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml new file mode 100644 index 000000000000..7b6ec2c69484 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/realtek,otto-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek Otto SoCs Timer/Counter + +description: + Realtek SoCs support a number of timers/counters. These are used + as a per CPU clock event generator and an overall CPU clocksource. + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + $nodename: + pattern: "^timer@[0-9a-f]+$" + + compatible: + items: + - enum: + - realtek,rtl9302-timer + - const: realtek,otto-timer + + reg: + items: + - description: timer0 registers + - description: timer1 registers + - description: timer2 registers + - description: timer3 registers + - description: timer4 registers + + clocks: + maxItems: 1 + + interrupts: + items: + - description: timer0 interrupt + - description: timer1 interrupt + - description: timer2 interrupt + - description: timer3 interrupt + - description: timer4 interrupt + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + timer@3200 { + compatible = "realtek,rtl9302-timer", "realtek,otto-timer"; + reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>, + <0x3230 0x10>, <0x3240 0x10>; + + interrupt-parent = <&intc>; + interrupts = <7>, <8>, <9>, <10>, <11>; + clocks = <&lx_clk>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml index 360a5cf1ae9c..75b0e7c70b62 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml @@ -21,13 +21,24 @@ properties: compatible: items: - enum: + - renesas,tmu-r8a73a4 # R-Mobile APE6 - renesas,tmu-r8a7740 # R-Mobile A1 + - renesas,tmu-r8a7742 # RZ/G1H + - renesas,tmu-r8a7743 # RZ/G1M + - renesas,tmu-r8a7744 # RZ/G1N + - renesas,tmu-r8a7745 # RZ/G1E + - renesas,tmu-r8a77470 # RZ/G1C - renesas,tmu-r8a774a1 # RZ/G2M - renesas,tmu-r8a774b1 # RZ/G2N - renesas,tmu-r8a774c0 # RZ/G2E - renesas,tmu-r8a774e1 # RZ/G2H - renesas,tmu-r8a7778 # R-Car M1A - renesas,tmu-r8a7779 # R-Car H1 + - renesas,tmu-r8a7790 # R-Car H2 + - renesas,tmu-r8a7791 # R-Car M2-W + - renesas,tmu-r8a7792 # R-Car V2H + - renesas,tmu-r8a7793 # R-Car M2-N + - renesas,tmu-r8a7794 # R-Car E2 - renesas,tmu-r8a7795 # R-Car H3 - renesas,tmu-r8a7796 # R-Car M3-W - renesas,tmu-r8a77961 # R-Car M3-W+ @@ -84,6 +95,7 @@ required: - compatible - reg - interrupts + - interrupt-names - clocks - clock-names - power-domains @@ -94,6 +106,7 @@ if: compatible: contains: enum: + - renesas,tmu-r8a73a4 - renesas,tmu-r8a7740 - renesas,tmu-r8a7778 - renesas,tmu-r8a7779 diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index fced6f2d8ecb..b42d43d2de48 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -40,6 +40,7 @@ properties: - allwinner,sun20i-d1-clint - sophgo,cv1800b-clint - sophgo,cv1812h-clint + - sophgo,sg2002-clint - thead,th1520-clint - const: thead,c900-clint - items: diff --git a/Documentation/devicetree/bindings/timer/sprd,sc9860-timer.yaml b/Documentation/devicetree/bindings/timer/sprd,sc9860-timer.yaml new file mode 100644 index 000000000000..62c6da8bab5a --- /dev/null +++ b/Documentation/devicetree/bindings/timer/sprd,sc9860-timer.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/sprd,sc9860-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC9860 timer + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +description: + The Spreadtrum SC9860 platform provides 3 general-purpose timers. + These timers can support 32bit or 64bit counter, as well as supporting + period mode or one-shot mode, and they can be a wakeup source + during deep sleep. + +properties: + compatible: + enum: + - sprd,sc9860-timer + - sprd,sc9860-suspend-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: sprd,sc9860-timer + then: + required: + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + timer@40050000 { + compatible = "sprd,sc9860-timer"; + reg = <0 0x40050000 0 0x20>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_32k>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt b/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt deleted file mode 100644 index 6d97e7d0f6e8..000000000000 --- a/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt +++ /dev/null @@ -1,20 +0,0 @@ -Spreadtrum timers - -The Spreadtrum SC9860 platform provides 3 general-purpose timers. -These timers can support 32bit or 64bit counter, as well as supporting -period mode or one-shot mode, and they are can be wakeup source -during deep sleep. - -Required properties: -- compatible: should be "sprd,sc9860-timer" for SC9860 platform. -- reg: The register address of the timer device. -- interrupts: Should contain the interrupt for the timer device. -- clocks: The phandle to the source clock (usually a 32.768 KHz fixed clock). - -Example: - timer@40050000 { - compatible = "sprd,sc9860-timer"; - reg = <0 0x40050000 0 0x20>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ext_32k>; - }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 0a419453d183..7913ca9b6b54 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -168,6 +168,8 @@ properties: - isil,isl69269 # Intersil ISL76682 Ambient Light Sensor - isil,isl76682 + # JEDEC JESD300 (SPD5118) Hub and Serial Presence Detect + - jedec,spd5118 # Linear Technology LTC2488 - lineartechnology,ltc2488 # 5 Bit Programmable, Pulse-Width Modulator @@ -286,14 +288,22 @@ properties: - mps,mp2857 # Monolithic Power Systems Inc. multi-phase controller mp2888 - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2891 + - mps,mp2891 # Monolithic Power Systems Inc. multi-phase controller mp2971 - mps,mp2971 # Monolithic Power Systems Inc. multi-phase controller mp2973 - mps,mp2973 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 + # Monolithic Power Systems Inc. multi-phase controller mp2993 + - mps,mp2993 + # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5920 + - mps,mp5920 # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 - mps,mp5990 + # Monolithic Power Systems Inc. digital step-down converter mp9941 + - mps,mp9941 # Monolithic Power Systems Inc. synchronous step-down converter mpq8785 - mps,mpq8785 # Temperature sensor with integrated fan control @@ -318,7 +328,9 @@ properties: - renesas,hs3001 # Renesas ISL29501 time-of-flight sensor - renesas,isl29501 - # Rohm DH2228FV + # Rohm BH2228FV 8 channel DAC + - rohm,bh2228fv + # Rohm DH2228FV - This device does not exist, use rohm,bh2228fv instead. - rohm,dh2228fv # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) - samsung,24ad0xd1 @@ -354,6 +366,8 @@ properties: - sparkfun,qwiic-joystick # i2c serial eeprom (24cxx) - st,24c256 + # Sierra Wireless mangOH Green SPI IoT interface + - swir,mangoh-iotport-spi # Ambient Light Sensor with SMBUS/Two Wire Serial Interface - taos,tsl2550 # Temperature Monitoring and Fan Control diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index cd3680dc002f..25a5edeea164 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -46,11 +46,11 @@ properties: clocks: minItems: 7 - maxItems: 11 + maxItems: 9 clock-names: minItems: 7 - maxItems: 11 + maxItems: 9 dma-coherent: true @@ -217,16 +217,14 @@ allOf: then: properties: clocks: - minItems: 11 - maxItems: 11 + minItems: 9 + maxItems: 9 clock-names: items: - - const: core_clk_src - const: core_clk - const: bus_clk - const: bus_aggr_clk - const: iface_clk - - const: core_clk_unipro_src - const: core_clk_unipro - const: core_clk_ice - const: ref_clk @@ -287,7 +285,7 @@ allOf: maxItems: 2 clocks: minItems: 7 - maxItems: 11 + maxItems: 9 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index 69a93a0722f0..f454ddd9bbaa 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -42,8 +42,11 @@ properties: - const: otg - const: wakeup - dr_mode: - enum: [host, otg, peripheral] + port: + $ref: /schemas/graph.yaml#/properties/port + description: + This port is used with the 'usb-role-switch' property to connect the + cdns3 to type C connector. maximum-speed: enum: [super-speed, high-speed, full-speed] @@ -70,6 +73,9 @@ properties: description: Enable resetting of PHY if Rx fail is detected type: boolean +dependencies: + port: [ usb-role-switch ] + required: - compatible - reg @@ -77,7 +83,10 @@ required: - interrupts - interrupt-names -additionalProperties: false +allOf: + - $ref: usb-drd.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 4f36a22aa6d7..a5f2e3442a0e 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -188,7 +188,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/usb/fsl,usb2.yaml b/Documentation/devicetree/bindings/usb/fsl,usb2.yaml new file mode 100644 index 000000000000..caedf11db284 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl,usb2.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SOC USB controllers + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + The device node for a USB controller that is part of a Freescale + SOC is as described in the document "Open Firmware Recommended + Practice: Universal Serial Bus" with the following modifications + and additions. + +properties: + compatible: + oneOf: + - enum: + - fsl-usb2-mph + - fsl-usb2-dr + - items: + - enum: + - fsl-usb2-dr-v2.2 + - fsl-usb2-dr-v2.5 + - const: fsl-usb2-dr + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + phy_type: + $ref: /schemas/types.yaml#/definitions/string + enum: [ulpi, serial, utmi, utmi_wide] + + port0: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates port0 is connected for fsl-usb2-mph compatible controllers. + + port1: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates port1 is connected for "fsl-usb2-mph" compatible controllers. + + fsl,invert-drvvbus: + $ref: /schemas/types.yaml#/definitions/flag + description: + for MPC5121 USB0 only. Indicates the + port power polarity of internal PHY signal DRVVBUS is inverted. + + fsl,invert-pwr-fault: + $ref: /schemas/types.yaml#/definitions/flag + description: + for MPC5121 USB0 only. Indicates + the PWR_FAULT signal polarity is inverted. + +required: + - compatible + - reg + - interrupts + - phy_type + +allOf: + - $ref: usb-drd.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + phy_type = "ulpi"; + port0; + port1; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; diff --git a/Documentation/devicetree/bindings/usb/fsl-usb.txt b/Documentation/devicetree/bindings/usb/fsl-usb.txt deleted file mode 100644 index 0b08b006c5ea..000000000000 --- a/Documentation/devicetree/bindings/usb/fsl-usb.txt +++ /dev/null @@ -1,81 +0,0 @@ -Freescale SOC USB controllers - -The device node for a USB controller that is part of a Freescale -SOC is as described in the document "Open Firmware Recommended -Practice : Universal Serial Bus" with the following modifications -and additions : - -Required properties : - - compatible : Should be "fsl-usb2-mph" for multi port host USB - controllers, or "fsl-usb2-dr" for dual role USB controllers - or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121. - Wherever applicable, the IP version of the USB controller should - also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132). - - phy_type : For multi port host USB controllers, should be one of - "ulpi", or "serial". For dual role USB controllers, should be - one of "ulpi", "utmi", "utmi_wide", or "serial". - - reg : Offset and length of the register set for the device - - port0 : boolean; if defined, indicates port0 is connected for - fsl-usb2-mph compatible controllers. Either this property or - "port1" (or both) must be defined for "fsl-usb2-mph" compatible - controllers. - - port1 : boolean; if defined, indicates port1 is connected for - fsl-usb2-mph compatible controllers. Either this property or - "port0" (or both) must be defined for "fsl-usb2-mph" compatible - controllers. - - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible - controllers. Can be "host", "peripheral", or "otg". Default to - "host" if not defined for backward compatibility. - -Recommended properties : - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - -Optional properties : - - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the - port power polarity of internal PHY signal DRVVBUS is inverted. - - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates - the PWR_FAULT signal polarity is inverted. - -Example multi port host USB controller device node : - usb@22000 { - compatible = "fsl-usb2-mph"; - reg = <22000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 1>; - phy_type = "ulpi"; - port0; - port1; - }; - -Example dual role USB controller device node : - usb@23000 { - compatible = "fsl-usb2-dr"; - reg = <23000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 1>; - dr_mode = "otg"; - phy = "ulpi"; - }; - -Example dual role USB controller device node for MPC5121ADS: - - usb@4000 { - compatible = "fsl,mpc5121-usb2-dr"; - reg = <0x4000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <44 0x8>; - dr_mode = "otg"; - phy_type = "utmi_wide"; - fsl,invert-drvvbus; - fsl,invert-pwr-fault; - }; diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index 37cf5249e526..fc833363cfb4 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller maintainers: - Icenowy Zheng <uwu@icenowy.me> -allOf: - - $ref: usb-device.yaml# - properties: compatible: enum: @@ -27,17 +24,44 @@ properties: vdd-supply: description: - the regulator that provides 3.3V core power to the hub. + The regulator that provides 3.3V or 5.0V core power to the hub. peer-hub: $ref: /schemas/types.yaml#/definitions/phandle description: - phandle to the peer hub on the controller. + For onboard hub controllers that support USB 3.x and USB 2.0 hubs + with shared resets and power supplies, this property is used to identify + the hubs with which these are shared. required: - compatible - reg +allOf: + - $ref: usb-device.yaml# + - if: + properties: + compatible: + contains: + enum: + - usb5e3,608 + then: + properties: + peer-hub: false + vdd-supply: false + + - if: + properties: + compatible: + contains: + enum: + - usb5e3,610 + - usb5e3,620 + then: + properties: + peer-hub: true + vdd-supply: true + additionalProperties: false examples: @@ -54,3 +78,29 @@ examples: reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>; }; }; + + - | + #include <dt-bindings/gpio/gpio.h> + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_5v>; + }; + + /* 3.1 hub on port 4 */ + hub_3_0: hub@2 { + compatible = "usb5e3,620"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_5v>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index 88e1607cf053..8a5f837eff94 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -22,6 +22,7 @@ properties: - nxp,cbdtu02043 - onnn,fsusb43l10x - pericom,pi3usb102 + - ti,tmuxhs4212 - const: gpio-sbu-mux enable-gpios: @@ -44,13 +45,18 @@ properties: required: - compatible - - enable-gpios - select-gpios - orientation-switch - port allOf: - $ref: usb-switch.yaml# + - if: + required: + - mode-switch + then: + required: + - enable-gpios additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml index c5e9ce2e7bc2..27b909de4992 100644 --- a/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml @@ -34,6 +34,13 @@ properties: clocks: maxItems: 1 + microchip,ext-vbus-drv: + description: + Some ULPI USB PHYs do not support an internal VBUS supply and driving + the CPEN pin requires the configuration of the UPLI_USE__EXTVBUS + bit in ULPI_BUSCONTROL. + $ref: /schemas/types.yaml#/definitions/flag + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index cf633d488c3f..efde47a5b145 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -30,6 +30,8 @@ properties: - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 + - qcom,sc8180x-dwc3 + - qcom,sc8180x-dwc3-mp - qcom,sc8280xp-dwc3 - qcom,sc8280xp-dwc3-mp - qcom,sdm660-dwc3 @@ -334,6 +336,8 @@ allOf: contains: enum: - qcom,qcm2290-dwc3 + - qcom,sc8180x-dwc3 + - qcom,sc8180x-dwc3-mp - qcom,sm6115-dwc3 - qcom,sm6125-dwc3 - qcom,sm8150-dwc3 @@ -448,6 +452,7 @@ allOf: - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 + - qcom,sc8180x-dwc3 - qcom,sc8280xp-dwc3 - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 @@ -480,6 +485,30 @@ allOf: compatible: contains: enum: + - qcom,sc8180x-dwc3-mp + then: + properties: + interrupts: + minItems: 10 + maxItems: 10 + interrupt-names: + items: + - const: pwr_event_1 + - const: pwr_event_2 + - const: hs_phy_1 + - const: hs_phy_2 + - const: dp_hs_phy_1 + - const: dm_hs_phy_1 + - const: dp_hs_phy_2 + - const: dm_hs_phy_2 + - const: ss_phy_1 + - const: ss_phy_2 + + - if: + properties: + compatible: + contains: + enum: - qcom,sc8280xp-dwc3-mp then: properties: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index fbf47f0bacf1..a70ce43b3dc0 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -246,6 +246,8 @@ patternProperties: description: CALAO Systems SAS "^calxeda,.*": description: Calxeda + "^cameo,.*": + description: Cameo Communications, Inc "^canaan,.*": description: Canaan, Inc. "^caninos,.*": @@ -338,6 +340,8 @@ patternProperties: description: Czech Technical University in Prague "^cubietech,.*": description: Cubietech, Ltd. + "^cudy,.*": + description: Shenzhen Cudy Technology Co., Ltd. "^cui,.*": description: CUI Devices "^cypress,.*": @@ -394,6 +398,8 @@ patternProperties: description: DPTechnics "^dragino,.*": description: Dragino Technology Co., Limited + "^dream,.*": + description: Dream Property GmbH "^ds,.*": description: DaSheng, Inc. "^dserve,.*": @@ -820,6 +826,8 @@ patternProperties: description: Lichee Pi "^linaro,.*": description: Linaro Limited + "^lincolntech,.*": + description: Lincoln Technology Solutions "^lineartechnology,.*": description: Linear Technology "^linksprite,.*": @@ -924,6 +932,8 @@ patternProperties: description: Microsoft Corporation "^microsys,.*": description: MicroSys Electronics GmbH + "^microtips,.*": + description: Microtips Technology USA "^mikroe,.*": description: MikroElektronika d.o.o. "^mikrotik,.*": @@ -995,6 +1005,8 @@ patternProperties: description: MYIR Tech Limited "^national,.*": description: National Semiconductor + "^neardi,.*": + description: Shanghai Neardi Technology Co., Ltd. "^nec,.*": description: NEC LCD Technologies, Ltd. "^neonode,.*": @@ -1082,6 +1094,8 @@ patternProperties: description: OpenPandora GmbH "^openrisc,.*": description: OpenRISC.io + "^openwrt,.*": + description: OpenWrt "^option,.*": description: Option NV "^oranth,.*": @@ -1160,6 +1174,8 @@ patternProperties: description: PowerVR (deprecated, use img) "^powkiddy,.*": description: Powkiddy + "^primeview,.*": + description: Prime View International (PVI) "^primux,.*": description: Primux Trading, S.L. "^probox2,.*": @@ -1254,6 +1270,10 @@ patternProperties: description: Smart Battery System "^schindler,.*": description: Schindler + "^schneider,.*": + description: Schneider Electric + "^sciosense,.*": + description: ScioSense B.V. "^seagate,.*": description: Seagate Technology PLC "^seeed,.*": diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml index 69845ec32e81..d0eff1ea52b4 100644 --- a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml @@ -21,6 +21,7 @@ properties: - amlogic,t7-wdt - items: - enum: + - amlogic,a4-wdt - amlogic,c3-wdt - amlogic,s4-wdt - const: amlogic,t7-wdt diff --git a/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml b/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml index c8f698120597..64619ba08d40 100644 --- a/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml @@ -28,7 +28,7 @@ properties: Add this property to disable the watchdog during suspend. Only use this option if you can't use the watchdog automatic suspend function during a suspend (see register CONTROL_B). - + dlg,wdt-sd: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml index 181f0cc5b5bd..36b836d0620c 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX Watchdog Timer (WDT) Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml index 9c50766bf690..a09686b3030d 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml @@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX7ULP Watchdog Timer (WDT) Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> allOf: - $ref: watchdog.yaml# diff --git a/Documentation/devicetree/bindings/watchdog/img,pdc-wdt.yaml b/Documentation/devicetree/bindings/watchdog/img,pdc-wdt.yaml new file mode 100644 index 000000000000..a88a27354505 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/img,pdc-wdt.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/img,pdc-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT) + +maintainers: + - Shresth Prasad <shresthprasad7@gmail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - img,pdc-wdt + + reg: + maxItems: 1 + + clocks: + items: + - description: watchdog counter clock + - description: register interface clock + + clock-names: + items: + - const: wdt + - const: sys + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + watchdog@18102100 { + compatible = "img,pdc-wdt"; + reg = <0x18102100 0x100>; + clocks = <&pdc_wdt_clk>, <&sys_clk>; + clock-names = "wdt", "sys"; + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt deleted file mode 100644 index b2fa11fd43de..000000000000 --- a/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt +++ /dev/null @@ -1,19 +0,0 @@ -*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT) - -Required properties: -- compatible : Should be "img,pdc-wdt" -- reg : Should contain WDT registers location and length -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Should contain "wdt" and "sys"; the watchdog counter - clock and register interface clock respectively. -- interrupts : Should contain WDT interrupt - -Examples: - -watchdog@18102100 { - compatible = "img,pdc-wdt"; - reg = <0x18102100 0x100>; - clocks = <&pdc_wdt_clk>, <&sys_clk>; - clock-names = "wdt", "sys"; - interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml index ffb17add491a..eba454d1680f 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml @@ -29,6 +29,7 @@ properties: - renesas,r9a07g043-wdt # RZ/G2UL and RZ/Five - renesas,r9a07g044-wdt # RZ/G2{L,LC} - renesas,r9a07g054-wdt # RZ/V2L + - renesas,r9a08g045-wdt # RZ/G3S - const: renesas,rzg2l-wdt - items: diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index d6f7efefea42..e6ffd59bb8f0 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -143,7 +143,7 @@ Return values ~~~~~~~~~~~~~ The return value, if any, should be described in a dedicated section -named ``Return``. +named ``Return`` (or ``Returns``). .. note:: @@ -337,7 +337,7 @@ Typedefs with function prototypes can also be documented:: * Description of the type. * * Context: Locking context. - * Return: Meaning of the return value. + * Returns: Meaning of the return value. */ typedef void (*type_name)(struct v4l2_ctrl *arg1, void *arg2); diff --git a/Documentation/driver-api/cxl/index.rst b/Documentation/driver-api/cxl/index.rst index 036e49553542..12b82725d322 100644 --- a/Documentation/driver-api/cxl/index.rst +++ b/Documentation/driver-api/cxl/index.rst @@ -9,4 +9,6 @@ Compute Express Link memory-devices + maturity-map + .. only:: subproject and html diff --git a/Documentation/driver-api/cxl/maturity-map.rst b/Documentation/driver-api/cxl/maturity-map.rst new file mode 100644 index 000000000000..df8e2ac2a320 --- /dev/null +++ b/Documentation/driver-api/cxl/maturity-map.rst @@ -0,0 +1,202 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +=========================================== +Compute Express Link Subsystem Maturity Map +=========================================== + +The Linux CXL subsystem tracks the dynamic `CXL specification +<https://computeexpresslink.org/cxl-specification-landing-page>`_ that +continues to respond to new use cases with new features, capability +updates and fixes. At any given point some aspects of the subsystem are +more mature than others. While the periodic pull requests summarize the +`work being incorporated each merge window +<https://lore.kernel.org/linux-cxl/?q=s%3APULL+s%3ACXL+tc%3Atorvalds+NOT+s%3ARe>`_, +those do not always convey progress relative to a starting point and a +future end goal. + +What follows is a coarse breakdown of the subsystem's major +responsibilities along with a maturity score. The expectation is that +the change-history of this document provides an overview summary of the +subsystem maturation over time. + +The maturity scores are: + +- [3] Mature: Work in this area is complete and no changes on the horizon. + Note that this score can regress from one kernel release to the next + based on new test results or end user reports. + +- [2] Stabilizing: Major functionality operational, common cases are + mature, but known corner cases are still a work in progress. + +- [1] Initial: Capability that has exited the Proof of Concept phase, but + may still have significant gaps to close and fixes to apply as real + world testing occurs. + +- [0] Known gap: Feature is on a medium to long term horizon to + implement. If the specification has a feature that does not even have + a '0' score in this document, there is a good chance that no one in + the linux-cxl@vger.kernel.org community has started to look at it. + +- X: Out of scope for kernel enabling, or kernel enabling not required + +Feature and Capabilities +======================== + +Enumeration / Provisioning +-------------------------- +All of the fundamental enumeration an object model of the subsystem is +in place, but there are several corner cases that are pending closure. + + +* [2] CXL Window Enumeration + + * [0] :ref:`Extended-linear memory-side cache <extended-linear>` + * [0] Low Memory-hole + * [0] Hetero-interleave + +* [2] Switch Enumeration + + * [0] CXL register enumeration link-up dependency + +* [2] HDM Decoder Configuration + + * [0] Decoder target and granularity constraints + +* [2] Performance enumeration + + * [3] Endpoint CDAT + * [3] Switch CDAT + * [1] CDAT to Core-mm integration + + * [1] x86 + * [0] Arm64 + * [0] All other arch. + + * [0] Shared link + +* [2] Hotplug + (see CXL Window Enumeration) + + * [0] Handle Soft Reserved conflicts + +* [0] :ref:`RCH link status <rch-link-status>` +* [0] Fabrics / G-FAM (chapter 7) +* [0] Global Access Endpoint + + +RAS +--- +In many ways CXL can be seen as a standardization of what would normally +be handled by custom EDAC drivers. The open development here is +mainly caused by the enumeration corner cases above. + +* [3] Component events (OS) +* [2] Component events (FFM) +* [1] Endpoint protocol errors (OS) +* [1] Endpoint protocol errors (FFM) +* [0] Switch protocol errors (OS) +* [1] Switch protocol errors (FFM) +* [2] DPA->HPA Address translation + + * [1] XOR Interleave translation + (see CXL Window Enumeration) + +* [1] Memory Failure coordination +* [0] Scrub control +* [2] ACPI error injection EINJ + + * [0] EINJ v2 + * [X] Compliance DOE + +* [2] Native error injection +* [3] RCH error handling +* [1] VH error handling +* [0] PPR +* [0] Sparing +* [0] Device built in test + + +Mailbox commands +---------------- + +* [3] Firmware update +* [3] Health / Alerts +* [1] :ref:`Background commands <background-commands>` +* [3] Sanitization +* [3] Security commands +* [3] RAW Command Debug Passthrough +* [0] CEL-only-validation Passthrough +* [0] Switch CCI +* [3] Timestamp +* [1] PMEM labels +* [0] PMEM GPF / Dirty Shutdown +* [0] Scan Media + +PMU +--- +* [1] Type 3 PMU +* [0] Switch USP/ DSP, Root Port + +Security +-------- + +* [X] CXL Trusted Execution Environment Security Protocol (TSP) +* [X] CXL IDE (subsumed by TSP) + +Memory-pooling +-------------- + +* [1] Hotplug of LDs (via PCI hotplug) +* [0] Dynamic Capacity Device (DCD) Support + +Multi-host sharing +------------------ + +* [0] Hardware coherent shared memory +* [0] Software managed coherency shared memory + +Multi-host memory +----------------- + +* [0] Dynamic Capacity Device Support +* [0] Sharing + +Accelerator +----------- + +* [0] Accelerator memory enumeration HDM-D (CXL 1.1/2.0 Type-2) +* [0] Accelerator memory enumeration HDM-DB (CXL 3.0 Type-2) +* [0] CXL.cache 68b (CXL 2.0) +* [0] CXL.cache 256b Cache IDs (CXL 3.0) + +User Flow Support +----------------- + +* [0] HPA->DPA Address translation (need xormaps export solution) + +Details +======= + +.. _extended-linear: + +* **Extended-linear memory-side cache**: An HMAT proposal to enumerate the presence of a + memory-side cache where the cache capacity extends the SRAT address + range capacity. `See the ECN + <https://lore.kernel.org/linux-cxl/6650e4f835a0e_195e294a8@dwillia2-mobl3.amr.corp.intel.com.notmuch/>`_ + for more details: + +.. _rch-link-status: + +* **RCH Link Status**: RCH (Restricted CXL Host) topologies, end up + hiding some standard registers like PCIe Link Status / Capabilities in + the CXL RCRB (Root Complex Register Block). + +.. _background-commands: + +* **Background commands**: The CXL background command mechanism is + awkward as the single slot is monopolized potentially indefinitely by + various commands. A `cancel on conflict + <http://lore.kernel.org/r/66035c2e8ba17_770232948b@dwillia2-xfh.jf.intel.com.notmuch>`_ + facility is needed to make sure the kernel can ensure forward progress + of priority commands. diff --git a/Documentation/driver-api/dmaengine/client.rst b/Documentation/driver-api/dmaengine/client.rst index ecf139f73da4..d491e385d61a 100644 --- a/Documentation/driver-api/dmaengine/client.rst +++ b/Documentation/driver-api/dmaengine/client.rst @@ -80,6 +80,10 @@ The details of these operations are: - slave_sg: DMA a list of scatter gather buffers from/to a peripheral + - peripheral_dma_vec: DMA an array of scatter gather buffers from/to a + peripheral. Similar to slave_sg, but uses an array of dma_vec + structures instead of a scatterlist. + - dma_cyclic: Perform a cyclic DMA operation from/to a peripheral till the operation is explicitly stopped. @@ -102,6 +106,11 @@ The details of these operations are: unsigned int sg_len, enum dma_data_direction direction, unsigned long flags); + struct dma_async_tx_descriptor *dmaengine_prep_peripheral_dma_vec( + struct dma_chan *chan, const struct dma_vec *vecs, + size_t nents, enum dma_data_direction direction, + unsigned long flags); + struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_data_direction direction); diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst index ceac2a300e32..3085f8b460fa 100644 --- a/Documentation/driver-api/dmaengine/provider.rst +++ b/Documentation/driver-api/dmaengine/provider.rst @@ -433,6 +433,12 @@ supported. - residue: Provides the residue bytes of the transfer for those that support residue. +- ``device_prep_peripheral_dma_vec`` + + - Similar to ``device_prep_slave_sg``, but it takes a pointer to a + array of ``dma_vec`` structures, which (in the long run) will replace + scatterlists. + - ``device_issue_pending`` - Takes the first transaction descriptor in the pending queue, @@ -544,6 +550,10 @@ dma_cookie_t - Not really relevant any more since the introduction of ``virt-dma`` that abstracts it away. +dma_vec + +- A small structure that contains a DMA address and length. + DMA_CTRL_ACK - If clear, the descriptor cannot be reused by provider until the diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index 18caebad7376..ac9ee7441887 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -464,7 +464,10 @@ SLAVE DMA ENGINE SPI devm_spi_alloc_master() devm_spi_alloc_slave() + devm_spi_optimize_message() devm_spi_register_controller() + devm_spi_register_host() + devm_spi_register_target() WATCHDOG devm_watchdog_register_device() diff --git a/Documentation/driver-api/driver-model/platform.rst b/Documentation/driver-api/driver-model/platform.rst index 1fe5c6c6199c..7beb8a9648c5 100644 --- a/Documentation/driver-api/driver-model/platform.rst +++ b/Documentation/driver-api/driver-model/platform.rst @@ -41,13 +41,14 @@ and shutdown notifications using the standard conventions:: struct platform_driver { int (*probe)(struct platform_device *); - int (*remove)(struct platform_device *); + void (*remove)(struct platform_device *); void (*shutdown)(struct platform_device *); int (*suspend)(struct platform_device *, pm_message_t state); - int (*suspend_late)(struct platform_device *, pm_message_t state); - int (*resume_early)(struct platform_device *); int (*resume)(struct platform_device *); struct device_driver driver; + const struct platform_device_id *id_table; + bool prevent_deferred_probe; + bool driver_managed_dma; }; Note that probe() should in general verify that the specified device hardware diff --git a/Documentation/driver-api/gpio/board.rst b/Documentation/driver-api/gpio/board.rst index b33aa04f213f..4fd1cbd8296e 100644 --- a/Documentation/driver-api/gpio/board.rst +++ b/Documentation/driver-api/gpio/board.rst @@ -4,12 +4,6 @@ GPIO Mappings This document explains how GPIOs can be assigned to given devices and functions. -Note that it only applies to the new descriptor-based interface. For a -description of the deprecated integer-based GPIO interface please refer to -legacy.rst (actually, there is no real mapping possible with the old -interface; you just fetch an integer from somewhere and request the -corresponding GPIO). - All platforms can enable the GPIO library, but if the platform strictly requires GPIO functionality to be present, it needs to select GPIOLIB from its Kconfig. Then, how GPIOs are mapped depends on what the platform uses to diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst index ab56ab0dd7a6..bb3366047fad 100644 --- a/Documentation/driver-api/gpio/consumer.rst +++ b/Documentation/driver-api/gpio/consumer.rst @@ -2,9 +2,7 @@ GPIO Descriptor Consumer Interface ================================== -This document describes the consumer interface of the GPIO framework. Note that -it describes the new descriptor-based interface. For a description of the -deprecated integer-based GPIO interface please refer to legacy.rst. +This document describes the consumer interface of the GPIO framework. Guidelines for GPIOs consumers diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst index e541bd2e898b..ae433261e11a 100644 --- a/Documentation/driver-api/gpio/driver.rst +++ b/Documentation/driver-api/gpio/driver.rst @@ -69,9 +69,8 @@ driver code: The code implementing a gpio_chip should support multiple instances of the controller, preferably using the driver model. That code will configure each -gpio_chip and issue gpiochip_add(), gpiochip_add_data(), or -devm_gpiochip_add_data(). Removing a GPIO controller should be rare; use -gpiochip_remove() when it is unavoidable. +gpio_chip and issue gpiochip_add_data() or devm_gpiochip_add_data(). Removing +a GPIO controller should be rare; use gpiochip_remove() when it is unavoidable. Often a gpio_chip is part of an instance-specific structure with states not exposed by the GPIO interfaces, such as addressing, power management, and more. diff --git a/Documentation/driver-api/gpio/drivers-on-gpio.rst b/Documentation/driver-api/gpio/drivers-on-gpio.rst index af632d764ac6..95572d2a94ce 100644 --- a/Documentation/driver-api/gpio/drivers-on-gpio.rst +++ b/Documentation/driver-api/gpio/drivers-on-gpio.rst @@ -27,7 +27,12 @@ hardware descriptions such as device tree or ACPI: to the lines for a more permanent solution of this type. - gpio-beeper: drivers/input/misc/gpio-beeper.c is used to provide a beep from - an external speaker connected to a GPIO line. + an external speaker connected to a GPIO line. (If the beep is controlled by + off/on, for an actual PWM waveform, see pwm-gpio below.) + +- pwm-gpio: drivers/pwm/pwm-gpio.c is used to toggle a GPIO with a high + resolution timer producing a PWM waveform on the GPIO line, as well as + Linux high resolution timers can do. - extcon-gpio: drivers/extcon/extcon-gpio.c is used when you need to read an external connector status, such as a headset line for an audio driver or an diff --git a/Documentation/driver-api/gpio/index.rst b/Documentation/driver-api/gpio/index.rst index 1d48fe248f05..34b57cee3391 100644 --- a/Documentation/driver-api/gpio/index.rst +++ b/Documentation/driver-api/gpio/index.rst @@ -13,7 +13,6 @@ Contents: consumer board drivers-on-gpio - legacy bt8xxgpio Core diff --git a/Documentation/driver-api/gpio/intro.rst b/Documentation/driver-api/gpio/intro.rst index c9c19243b97f..5936a9c57df3 100644 --- a/Documentation/driver-api/gpio/intro.rst +++ b/Documentation/driver-api/gpio/intro.rst @@ -10,18 +10,6 @@ The documents in this directory give detailed instructions on how to access GPIOs in drivers, and how to write a driver for a device that provides GPIOs itself. -Due to the history of GPIO interfaces in the kernel, there are two different -ways to obtain and use GPIOs: - - - The descriptor-based interface is the preferred way to manipulate GPIOs, - and is described by all the files in this directory excepted legacy.rst. - - The legacy integer-based interface which is considered deprecated (but still - usable for compatibility reasons) is documented in legacy.rst. - -The remainder of this document applies to the new descriptor-based interface. -legacy.rst contains the same information applied to the legacy -integer-based interface. - What is a GPIO? =============== diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst deleted file mode 100644 index 534dfe95d128..000000000000 --- a/Documentation/driver-api/gpio/legacy.rst +++ /dev/null @@ -1,679 +0,0 @@ -====================== -Legacy GPIO Interfaces -====================== - -This provides an overview of GPIO access conventions on Linux. - -These calls use the gpio_* naming prefix. No other calls should use that -prefix, or the related __gpio_* prefix. - - -What is a GPIO? -=============== -A "General Purpose Input/Output" (GPIO) is a flexible software-controlled -digital signal. They are provided from many kinds of chip, and are familiar -to Linux developers working with embedded and custom hardware. Each GPIO -represents a bit connected to a particular pin, or "ball" on Ball Grid Array -(BGA) packages. Board schematics show which external hardware connects to -which GPIOs. Drivers can be written generically, so that board setup code -passes such pin configuration data to drivers. - -System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every -non-dedicated pin can be configured as a GPIO; and most chips have at least -several dozen of them. Programmable logic devices (like FPGAs) can easily -provide GPIOs; multifunction chips like power managers, and audio codecs -often have a few such pins to help with pin scarcity on SOCs; and there are -also "GPIO Expander" chips that connect using the I2C or SPI serial busses. -Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS -firmware knowing how they're used). - -The exact capabilities of GPIOs vary between systems. Common options: - - - Output values are writable (high=1, low=0). Some chips also have - options about how that value is driven, so that for example only one - value might be driven ... supporting "wire-OR" and similar schemes - for the other value (notably, "open drain" signaling). - - - Input values are likewise readable (1, 0). Some chips support readback - of pins configured as "output", which is very useful in such "wire-OR" - cases (to support bidirectional signaling). GPIO controllers may have - input de-glitch/debounce logic, sometimes with software controls. - - - Inputs can often be used as IRQ signals, often edge triggered but - sometimes level triggered. Such IRQs may be configurable as system - wakeup events, to wake the system from a low power state. - - - Usually a GPIO will be configurable as either input or output, as needed - by different product boards; single direction ones exist too. - - - Most GPIOs can be accessed while holding spinlocks, but those accessed - through a serial bus normally can't. Some systems support both types. - -On a given board each GPIO is used for one specific purpose like monitoring -MMC/SD card insertion/removal, detecting card writeprotect status, driving -a LED, configuring a transceiver, bitbanging a serial bus, poking a hardware -watchdog, sensing a switch, and so on. - - -GPIO conventions -================ -Note that this is called a "convention" because you don't need to do it this -way, and it's no crime if you don't. There **are** cases where portability -is not the main issue; GPIOs are often used for the kind of board-specific -glue logic that may even change between board revisions, and can't ever be -used on a board that's wired differently. Only least-common-denominator -functionality can be very portable. Other features are platform-specific, -and that can be critical for glue logic. - -Plus, this doesn't require any implementation framework, just an interface. -One platform might implement it as simple inline functions accessing chip -registers; another might implement it by delegating through abstractions -used for several very different kinds of GPIO controller. (There is some -optional code supporting such an implementation strategy, described later -in this document, but drivers acting as clients to the GPIO interface must -not care how it's implemented.) - -That said, if the convention is supported on their platform, drivers should -use it when possible. Platforms must select GPIOLIB if GPIO functionality -is strictly required. Drivers that can't work without -standard GPIO calls should have Kconfig entries which depend on GPIOLIB. The -GPIO calls are available, either as "real code" or as optimized-away stubs, -when drivers use the include file: - - #include <linux/gpio.h> - -If you stick to this convention then it'll be easier for other developers to -see what your code is doing, and help maintain it. - -Note that these operations include I/O barriers on platforms which need to -use them; drivers don't need to add them explicitly. - - -Identifying GPIOs ------------------ -GPIOs are identified by unsigned integers in the range 0..MAX_INT. That -reserves "negative" numbers for other purposes like marking signals as -"not available on this board", or indicating faults. Code that doesn't -touch the underlying hardware treats these integers as opaque cookies. - -Platforms define how they use those integers, and usually #define symbols -for the GPIO lines so that board-specific setup code directly corresponds -to the relevant schematics. In contrast, drivers should only use GPIO -numbers passed to them from that setup code, using platform_data to hold -board-specific pin configuration data (along with other board specific -data they need). That avoids portability problems. - -So for example one platform uses numbers 32-159 for GPIOs; while another -uses numbers 0..63 with one set of GPIO controllers, 64-79 with another -type of GPIO controller, and on one particular board 80-95 with an FPGA. -The numbers need not be contiguous; either of those platforms could also -use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders. - -If you want to initialize a structure with an invalid GPIO number, use -some negative number (perhaps "-EINVAL"); that will never be valid. To -test if such number from such a structure could reference a GPIO, you -may use this predicate: - - int gpio_is_valid(int number); - -A number that's not valid will be rejected by calls which may request -or free GPIOs (see below). Other numbers may also be rejected; for -example, a number might be valid but temporarily unused on a given board. - -Whether a platform supports multiple GPIO controllers is a platform-specific -implementation issue, as are whether that support can leave "holes" in the space -of GPIO numbers, and whether new controllers can be added at runtime. Such issues -can affect things including whether adjacent GPIO numbers are both valid. - -Using GPIOs ------------ -The first thing a system should do with a GPIO is allocate it, using -the gpio_request() call; see later. - -One of the next things to do with a GPIO, often in board setup code when -setting up a platform_device using the GPIO, is mark its direction:: - - /* set as input or output, returning 0 or negative errno */ - int gpio_direction_input(unsigned gpio); - int gpio_direction_output(unsigned gpio, int value); - -The return value is zero for success, else a negative errno. It should -be checked, since the get/set calls don't have error returns and since -misconfiguration is possible. You should normally issue these calls from -a task context. However, for spinlock-safe GPIOs it's OK to use them -before tasking is enabled, as part of early board setup. - -For output GPIOs, the value provided becomes the initial output value. -This helps avoid signal glitching during system startup. - -For compatibility with legacy interfaces to GPIOs, setting the direction -of a GPIO implicitly requests that GPIO (see below) if it has not been -requested already. That compatibility is being removed from the optional -gpiolib framework. - -Setting the direction can fail if the GPIO number is invalid, or when -that particular GPIO can't be used in that mode. It's generally a bad -idea to rely on boot firmware to have set the direction correctly, since -it probably wasn't validated to do more than boot Linux. (Similarly, -that board setup code probably needs to multiplex that pin as a GPIO, -and configure pullups/pulldowns appropriately.) - - -Spinlock-Safe GPIO access -------------------------- -Most GPIO controllers can be accessed with memory read/write instructions. -Those don't need to sleep, and can safely be done from inside hard -(nonthreaded) IRQ handlers and similar contexts. - -Use the following calls to access such GPIOs:: - - /* GPIO INPUT: return zero or nonzero */ - int gpio_get_value(unsigned gpio); - - /* GPIO OUTPUT */ - void gpio_set_value(unsigned gpio, int value); - -The values are boolean, zero for low, nonzero for high. When reading the -value of an output pin, the value returned should be what's seen on the -pin ... that won't always match the specified output value, because of -issues including open-drain signaling and output latencies. - -The get/set calls have no error returns because "invalid GPIO" should have -been reported earlier from gpio_direction_*(). However, note that not all -platforms can read the value of output pins; those that can't should always -return zero. Also, using these calls for GPIOs that can't safely be accessed -without sleeping (see below) is an error. - -Platform-specific implementations are encouraged to optimize the two -calls to access the GPIO value in cases where the GPIO number (and for -output, value) are constant. It's normal for them to need only a couple -of instructions in such cases (reading or writing a hardware register), -and not to need spinlocks. Such optimized calls can make bitbanging -applications a lot more efficient (in both space and time) than spending -dozens of instructions on subroutine calls. - - -GPIO access that may sleep --------------------------- -Some GPIO controllers must be accessed using message based busses like I2C -or SPI. Commands to read or write those GPIO values require waiting to -get to the head of a queue to transmit a command and get its response. -This requires sleeping, which can't be done from inside IRQ handlers. -To access such GPIOs, a different set of accessors is defined:: - - /* GPIO INPUT: return zero or nonzero, might sleep */ - int gpio_get_value_cansleep(unsigned gpio); - - /* GPIO OUTPUT, might sleep */ - void gpio_set_value_cansleep(unsigned gpio, int value); - -Accessing such GPIOs requires a context which may sleep, for example -a threaded IRQ handler, and those accessors must be used instead of -spinlock-safe accessors without the cansleep() name suffix. - -Other than the fact that these accessors might sleep, and will work -on GPIOs that can't be accessed from hardIRQ handlers, these calls act -the same as the spinlock-safe calls. - -**IN ADDITION** calls to setup and configure such GPIOs must be made -from contexts which may sleep, since they may need to access the GPIO -controller chip too (These setup calls are usually made from board -setup or driver probe/teardown code, so this is an easy constraint.):: - - gpio_direction_input() - gpio_direction_output() - gpio_request() - - ## gpio_request_one() - - gpio_free() - - -Claiming and Releasing GPIOs ----------------------------- -To help catch system configuration errors, two calls are defined:: - - /* request GPIO, returning 0 or negative errno. - * non-null labels may be useful for diagnostics. - */ - int gpio_request(unsigned gpio, const char *label); - - /* release previously-claimed GPIO */ - void gpio_free(unsigned gpio); - -Passing invalid GPIO numbers to gpio_request() will fail, as will requesting -GPIOs that have already been claimed with that call. The return value of -gpio_request() must be checked. You should normally issue these calls from -a task context. However, for spinlock-safe GPIOs it's OK to request GPIOs -before tasking is enabled, as part of early board setup. - -These calls serve two basic purposes. One is marking the signals which -are actually in use as GPIOs, for better diagnostics; systems may have -several hundred potential GPIOs, but often only a dozen are used on any -given board. Another is to catch conflicts, identifying errors when -(a) two or more drivers wrongly think they have exclusive use of that -signal, or (b) something wrongly believes it's safe to remove drivers -needed to manage a signal that's in active use. That is, requesting a -GPIO can serve as a kind of lock. - -Some platforms may also use knowledge about what GPIOs are active for -power management, such as by powering down unused chip sectors and, more -easily, gating off unused clocks. - -For GPIOs that use pins known to the pinctrl subsystem, that subsystem should -be informed of their use; a gpiolib driver's .request() operation may call -pinctrl_gpio_request(), and a gpiolib driver's .free() operation may call -pinctrl_gpio_free(). The pinctrl subsystem allows a pinctrl_gpio_request() -to succeed concurrently with a pin or pingroup being "owned" by a device for -pin multiplexing. - -Any programming of pin multiplexing hardware that is needed to route the -GPIO signal to the appropriate pin should occur within a GPIO driver's -.direction_input() or .direction_output() operations, and occur after any -setup of an output GPIO's value. This allows a glitch-free migration from a -pin's special function to GPIO. This is sometimes required when using a GPIO -to implement a workaround on signals typically driven by a non-GPIO HW block. - -Some platforms allow some or all GPIO signals to be routed to different pins. -Similarly, other aspects of the GPIO or pin may need to be configured, such as -pullup/pulldown. Platform software should arrange that any such details are -configured prior to gpio_request() being called for those GPIOs, e.g. using -the pinctrl subsystem's mapping table, so that GPIO users need not be aware -of these details. - -Also note that it's your responsibility to have stopped using a GPIO -before you free it. - -Considering in most cases GPIOs are actually configured right after they -are claimed, three additional calls are defined:: - - /* request a single GPIO, with initial configuration specified by - * 'flags', identical to gpio_request() wrt other arguments and - * return value - */ - int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); - -where 'flags' is currently defined to specify the following properties: - - * GPIOF_DIR_IN - to configure direction as input - * GPIOF_DIR_OUT - to configure direction as output - - * GPIOF_INIT_LOW - as output, set initial level to LOW - * GPIOF_INIT_HIGH - as output, set initial level to HIGH - -since GPIOF_INIT_* are only valid when configured as output, so group valid -combinations as: - - * GPIOF_IN - configure as input - * GPIOF_OUT_INIT_LOW - configured as output, initial level LOW - * GPIOF_OUT_INIT_HIGH - configured as output, initial level HIGH - -Further more, to ease the claim/release of multiple GPIOs, 'struct gpio' is -introduced to encapsulate all three fields as:: - - struct gpio { - unsigned gpio; - unsigned long flags; - const char *label; - }; - -A typical example of usage:: - - static struct gpio leds_gpios[] = { - { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* default to ON */ - { 33, GPIOF_OUT_INIT_LOW, "Green LED" }, /* default to OFF */ - { 34, GPIOF_OUT_INIT_LOW, "Red LED" }, /* default to OFF */ - { 35, GPIOF_OUT_INIT_LOW, "Blue LED" }, /* default to OFF */ - { ... }, - }; - - err = gpio_request_one(31, GPIOF_IN, "Reset Button"); - if (err) - ... - - -GPIOs mapped to IRQs --------------------- -GPIO numbers are unsigned integers; so are IRQ numbers. These make up -two logically distinct namespaces (GPIO 0 need not use IRQ 0). You can -map between them using calls like:: - - /* map GPIO numbers to IRQ numbers */ - int gpio_to_irq(unsigned gpio); - -Those return either the corresponding number in the other namespace, or -else a negative errno code if the mapping can't be done. (For example, -some GPIOs can't be used as IRQs.) It is an unchecked error to use a GPIO -number that wasn't set up as an input using gpio_direction_input(), or -to use an IRQ number that didn't originally come from gpio_to_irq(). - -These two mapping calls are expected to cost on the order of a single -addition or subtraction. They're not allowed to sleep. - -Non-error values returned from gpio_to_irq() can be passed to request_irq() -or free_irq(). They will often be stored into IRQ resources for platform -devices, by the board-specific initialization code. Note that IRQ trigger -options are part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are -system wakeup capabilities. - - -Emulating Open Drain Signals ----------------------------- -Sometimes shared signals need to use "open drain" signaling, where only the -low signal level is actually driven. (That term applies to CMOS transistors; -"open collector" is used for TTL.) A pullup resistor causes the high signal -level. This is sometimes called a "wire-AND"; or more practically, from the -negative logic (low=true) perspective this is a "wire-OR". - -One common example of an open drain signal is a shared active-low IRQ line. -Also, bidirectional data bus signals sometimes use open drain signals. - -Some GPIO controllers directly support open drain outputs; many don't. When -you need open drain signaling but your hardware doesn't directly support it, -there's a common idiom you can use to emulate it with any GPIO pin that can -be used as either an input or an output: - - LOW: gpio_direction_output(gpio, 0) ... this drives the signal - and overrides the pullup. - - HIGH: gpio_direction_input(gpio) ... this turns off the output, - so the pullup (or some other device) controls the signal. - -If you are "driving" the signal high but gpio_get_value(gpio) reports a low -value (after the appropriate rise time passes), you know some other component -is driving the shared signal low. That's not necessarily an error. As one -common example, that's how I2C clocks are stretched: a slave that needs a -slower clock delays the rising edge of SCK, and the I2C master adjusts its -signaling rate accordingly. - - -GPIO controllers and the pinctrl subsystem ------------------------------------------- - -A GPIO controller on a SOC might be tightly coupled with the pinctrl -subsystem, in the sense that the pins can be used by other functions -together with an optional gpio feature. We have already covered the -case where e.g. a GPIO controller need to reserve a pin or set the -direction of a pin by calling any of:: - - pinctrl_gpio_request() - pinctrl_gpio_free() - pinctrl_gpio_direction_input() - pinctrl_gpio_direction_output() - -But how does the pin control subsystem cross-correlate the GPIO -numbers (which are a global business) to a certain pin on a certain -pin controller? - -This is done by registering "ranges" of pins, which are essentially -cross-reference tables. These are described in -Documentation/driver-api/pin-control.rst - -While the pin allocation is totally managed by the pinctrl subsystem, -gpio (under gpiolib) is still maintained by gpio drivers. It may happen -that different pin ranges in a SoC is managed by different gpio drivers. - -This makes it logical to let gpio drivers announce their pin ranges to -the pin ctrl subsystem before it will call 'pinctrl_gpio_request' in order -to request the corresponding pin to be prepared by the pinctrl subsystem -before any gpio usage. - -For this, the gpio controller can register its pin range with pinctrl -subsystem. There are two ways of doing it currently: with or without DT. - -For with DT support refer to Documentation/devicetree/bindings/gpio/gpio.txt. - -For non-DT support, user can call gpiochip_add_pin_range() with appropriate -parameters to register a range of gpio pins with a pinctrl driver. For this -exact name string of pinctrl device has to be passed as one of the -argument to this routine. - - -What do these conventions omit? -=============================== -One of the biggest things these conventions omit is pin multiplexing, since -this is highly chip-specific and nonportable. One platform might not need -explicit multiplexing; another might have just two options for use of any -given pin; another might have eight options per pin; another might be able -to route a given GPIO to any one of several pins. (Yes, those examples all -come from systems that run Linux today.) - -Related to multiplexing is configuration and enabling of the pullups or -pulldowns integrated on some platforms. Not all platforms support them, -or support them in the same way; and any given board might use external -pullups (or pulldowns) so that the on-chip ones should not be used. -(When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.) -Likewise drive strength (2 mA vs 20 mA) and voltage (1.8V vs 3.3V) is a -platform-specific issue, as are models like (not) having a one-to-one -correspondence between configurable pins and GPIOs. - -There are other system-specific mechanisms that are not specified here, -like the aforementioned options for input de-glitching and wire-OR output. -Hardware may support reading or writing GPIOs in gangs, but that's usually -configuration dependent: for GPIOs sharing the same bank. (GPIOs are -commonly grouped in banks of 16 or 32, with a given SOC having several such -banks.) Some systems can trigger IRQs from output GPIOs, or read values -from pins not managed as GPIOs. Code relying on such mechanisms will -necessarily be nonportable. - -Dynamic definition of GPIOs is not currently standard; for example, as -a side effect of configuring an add-on board with some GPIO expanders. - - -GPIO implementor's framework (OPTIONAL) -======================================= -As noted earlier, there is an optional implementation framework making it -easier for platforms to support different kinds of GPIO controller using -the same programming interface. This framework is called "gpiolib". - -As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file -will be found there. That will list all the controllers registered through -this framework, and the state of the GPIOs currently in use. - - -Controller Drivers: gpio_chip ------------------------------ -In this framework each GPIO controller is packaged as a "struct gpio_chip" -with information common to each controller of that type: - - - methods to establish GPIO direction - - methods used to access GPIO values - - flag saying whether calls to its methods may sleep - - optional debugfs dump method (showing extra state like pullup config) - - label for diagnostics - -There is also per-instance data, which may come from device.platform_data: -the number of its first GPIO, and how many GPIOs it exposes. - -The code implementing a gpio_chip should support multiple instances of the -controller, possibly using the driver model. That code will configure each -gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be -rare; use gpiochip_remove() when it is unavoidable. - -Most often a gpio_chip is part of an instance-specific structure with state -not exposed by the GPIO interfaces, such as addressing, power management, -and more. Chips such as codecs will have complex non-GPIO state. - -Any debugfs dump method should normally ignore signals which haven't been -requested as GPIOs. They can use gpiochip_is_requested(), which returns -either NULL or the label associated with that GPIO when it was requested. - - -Platform Support ----------------- -To force-enable this framework, a platform's Kconfig will "select" GPIOLIB, -else it is up to the user to configure support for GPIO. - -If neither of these options are selected, the platform does not support -GPIOs through GPIO-lib and the code cannot be enabled by the user. - -Trivial implementations of those functions can directly use framework -code, which always dispatches through the gpio_chip:: - - #define gpio_get_value __gpio_get_value - #define gpio_set_value __gpio_set_value - -Fancier implementations could instead define those as inline functions with -logic optimizing access to specific SOC-based GPIOs. For example, if the -referenced GPIO is the constant "12", getting or setting its value could -cost as little as two or three instructions, never sleeping. When such an -optimization is not possible those calls must delegate to the framework -code, costing at least a few dozen instructions. For bitbanged I/O, such -instruction savings can be significant. - -For SOCs, platform-specific code defines and registers gpio_chip instances -for each bank of on-chip GPIOs. Those GPIOs should be numbered/labeled to -match chip vendor documentation, and directly match board schematics. They -may well start at zero and go up to a platform-specific limit. Such GPIOs -are normally integrated into platform initialization to make them always be -available, from arch_initcall() or earlier; they can often serve as IRQs. - - -Board Support -------------- -For external GPIO controllers -- such as I2C or SPI expanders, ASICs, multi -function devices, FPGAs or CPLDs -- most often board-specific code handles -registering controller devices and ensures that their drivers know what GPIO -numbers to use with gpiochip_add(). Their numbers often start right after -platform-specific GPIOs. - -For example, board setup code could create structures identifying the range -of GPIOs that chip will expose, and passes them to each GPIO expander chip -using platform_data. Then the chip driver's probe() routine could pass that -data to gpiochip_add(). - -Initialization order can be important. For example, when a device relies on -an I2C-based GPIO, its probe() routine should only be called after that GPIO -becomes available. That may mean the device should not be registered until -calls for that GPIO can work. One way to address such dependencies is for -such gpio_chip controllers to provide setup() and teardown() callbacks to -board specific code; those board specific callbacks would register devices -once all the necessary resources are available, and remove them later when -the GPIO controller device becomes unavailable. - - -Sysfs Interface for Userspace (OPTIONAL) -======================================== -Platforms which use the "gpiolib" implementors framework may choose to -configure a sysfs user interface to GPIOs. This is different from the -debugfs interface, since it provides control over GPIO direction and -value instead of just showing a gpio state summary. Plus, it could be -present on production systems without debugging support. - -Given appropriate hardware documentation for the system, userspace could -know for example that GPIO #23 controls the write protect line used to -protect boot loader segments in flash memory. System upgrade procedures -may need to temporarily remove that protection, first importing a GPIO, -then changing its output state, then updating the code before re-enabling -the write protection. In normal use, GPIO #23 would never be touched, -and the kernel would have no need to know about it. - -Again depending on appropriate hardware documentation, on some systems -userspace GPIO can be used to determine system configuration data that -standard kernels won't know about. And for some tasks, simple userspace -GPIO drivers could be all that the system really needs. - -Note that standard kernel drivers exist for common "LEDs and Buttons" -GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those -instead of talking directly to the GPIOs; they integrate with kernel -frameworks better than your userspace code could. - - -Paths in Sysfs --------------- -There are three kinds of entry in /sys/class/gpio: - - - Control interfaces used to get userspace control over GPIOs; - - - GPIOs themselves; and - - - GPIO controllers ("gpio_chip" instances). - -That's in addition to standard files including the "device" symlink. - -The control interfaces are write-only: - - /sys/class/gpio/ - - "export" ... Userspace may ask the kernel to export control of - a GPIO to userspace by writing its number to this file. - - Example: "echo 19 > export" will create a "gpio19" node - for GPIO #19, if that's not requested by kernel code. - - "unexport" ... Reverses the effect of exporting to userspace. - - Example: "echo 19 > unexport" will remove a "gpio19" - node exported using the "export" file. - -GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42) -and have the following read/write attributes: - - /sys/class/gpio/gpioN/ - - "direction" ... reads as either "in" or "out". This value may - normally be written. Writing as "out" defaults to - initializing the value as low. To ensure glitch free - operation, values "low" and "high" may be written to - configure the GPIO as an output with that initial value. - - Note that this attribute *will not exist* if the kernel - doesn't support changing the direction of a GPIO, or - it was exported by kernel code that didn't explicitly - allow userspace to reconfigure this GPIO's direction. - - "value" ... reads as either 0 (low) or 1 (high). If the GPIO - is configured as an output, this value may be written; - any nonzero value is treated as high. - - If the pin can be configured as interrupt-generating interrupt - and if it has been configured to generate interrupts (see the - description of "edge"), you can poll(2) on that file and - poll(2) will return whenever the interrupt was triggered. If - you use poll(2), set the events POLLPRI. If you use select(2), - set the file descriptor in exceptfds. After poll(2) returns, - either lseek(2) to the beginning of the sysfs file and read the - new value or close the file and re-open it to read the value. - - "edge" ... reads as either "none", "rising", "falling", or - "both". Write these strings to select the signal edge(s) - that will make poll(2) on the "value" file return. - - This file exists only if the pin can be configured as an - interrupt generating input pin. - - "active_low" ... reads as either 0 (false) or 1 (true). Write - any nonzero value to invert the value attribute both - for reading and writing. Existing and subsequent - poll(2) support configuration via the edge attribute - for "rising" and "falling" edges will follow this - setting. - -GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the -controller implementing GPIOs starting at #42) and have the following -read-only attributes: - - /sys/class/gpio/gpiochipN/ - - "base" ... same as N, the first GPIO managed by this chip - - "label" ... provided for diagnostics (not always unique) - - "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1) - -Board documentation should in most cases cover what GPIOs are used for -what purposes. However, those numbers are not always stable; GPIOs on -a daughtercard might be different depending on the base board being used, -or other cards in the stack. In such cases, you may need to use the -gpiochip nodes (possibly in conjunction with schematics) to determine -the correct GPIO number to use for a given signal. - - -API Reference -============= - -The functions listed in this section are deprecated. The GPIO descriptor based -API should be used in new code. - -.. kernel-doc:: drivers/gpio/gpiolib-legacy.c - :export: diff --git a/Documentation/driver-api/input.rst b/Documentation/driver-api/input.rst index 4bbb26ae2a89..bd7a3578ade7 100644 --- a/Documentation/driver-api/input.rst +++ b/Documentation/driver-api/input.rst @@ -40,3 +40,10 @@ Sparse keymap support .. kernel-doc:: drivers/input/sparse-keymap.c :export: +PS/2 protocol support +--------------------- +.. kernel-doc:: include/linux/libps2.h + :internal: + +.. kernel-doc:: drivers/input/serio/libps2.c + :export: diff --git a/Documentation/driver-api/media/v4l2-core.rst b/Documentation/driver-api/media/v4l2-core.rst index 58cba831ade5..ad987c34ad2a 100644 --- a/Documentation/driver-api/media/v4l2-core.rst +++ b/Documentation/driver-api/media/v4l2-core.rst @@ -26,3 +26,4 @@ Video4Linux devices v4l2-tuner v4l2-common v4l2-tveeprom + v4l2-jpeg diff --git a/Documentation/driver-api/media/v4l2-jpeg.rst b/Documentation/driver-api/media/v4l2-jpeg.rst new file mode 100644 index 000000000000..af3bc52f865b --- /dev/null +++ b/Documentation/driver-api/media/v4l2-jpeg.rst @@ -0,0 +1,10 @@ +.. SPDX-License-Identifier: GPL-2.0 + +V4L2 JPEG header related functions and data structures +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. kernel-doc:: include/media/v4l2-jpeg.h + :internal: + +.. kernel-doc:: drivers/media/v4l2-core/v4l2-jpeg.c + :export: diff --git a/Documentation/driver-api/pin-control.rst b/Documentation/driver-api/pin-control.rst index 4639912dc9cc..27ea1236307e 100644 --- a/Documentation/driver-api/pin-control.rst +++ b/Documentation/driver-api/pin-control.rst @@ -1002,7 +1002,7 @@ it even more compact which assumes you want to use pinctrl-foo and position .. code-block:: c static struct pinctrl_map mapping[] __initdata = { - PIN_MAP_MUX_GROUP("foo-i2c.o", PINCTRL_STATE_DEFAULT, + PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", NULL, "i2c0"), }; diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst index 6c1175c6afba..978198f8a18b 100644 --- a/Documentation/driver-api/thermal/sysfs-api.rst +++ b/Documentation/driver-api/thermal/sysfs-api.rst @@ -4,8 +4,6 @@ Generic Thermal Sysfs driver How To Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com> -Updated: 2 January 2008 - Copyright (c) 2008 Intel Corporation @@ -38,23 +36,23 @@ temperature) and throttle appropriate devices. :: - struct thermal_zone_device - *thermal_zone_device_register(char *type, - int trips, int mask, void *devdata, - struct thermal_zone_device_ops *ops, - const struct thermal_zone_params *tzp, - int passive_delay, int polling_delay)) + struct thermal_zone_device * + thermal_zone_device_register_with_trips(const char *type, + const struct thermal_trip *trips, + int num_trips, void *devdata, + const struct thermal_zone_device_ops *ops, + const struct thermal_zone_params *tzp, + unsigned int passive_delay, + unsigned int polling_delay) - This interface function adds a new thermal zone device (sensor) to + This interface function adds a new thermal zone device (sensor) to the /sys/class/thermal folder as `thermal_zone[0-*]`. It tries to bind all the - thermal cooling devices registered at the same time. + thermal cooling devices registered to it at the same time. type: the thermal zone type. trips: - the total number of trip points this thermal zone supports. - mask: - Bit string: If 'n'th bit is set, then trip point 'n' is writable. + the table of trip points for this thermal zone. devdata: device private data ops: @@ -67,32 +65,29 @@ temperature) and throttle appropriate devices. .get_temp: get the current temperature of the thermal zone. .set_trips: - set the trip points window. Whenever the current temperature - is updated, the trip points immediately below and above the - current temperature are found. - .get_mode: - get the current mode (enabled/disabled) of the thermal zone. - - - "enabled" means the kernel thermal management is - enabled. - - "disabled" will prevent kernel thermal driver action - upon trip points so that user applications can take - charge of thermal management. - .set_mode: - set the mode (enabled/disabled) of the thermal zone. - .get_trip_type: - get the type of certain trip point. - .get_trip_temp: - get the temperature above which the certain trip point - will be fired. + set the trip points window. Whenever the current temperature + is updated, the trip points immediately below and above the + current temperature are found. + .change_mode: + change the mode (enabled/disabled) of the thermal zone. + .set_trip_temp: + set the temperature of a given trip point. + .get_crit_temp: + get the critical temperature for this thermal zone. .set_emul_temp: - set the emulation temperature which helps in debugging - different threshold temperature points. + set the emulation temperature which helps in debugging + different threshold temperature points. + .get_trend: + get the trend of most recent zone temperature changes. + .hot: + hot trip point crossing handler. + .critical: + critical trip point crossing handler. tzp: thermal zone platform parameters. passive_delay: - number of milliseconds to wait between polls when - performing passive cooling. + number of milliseconds to wait between polls when performing passive + cooling. polling_delay: number of milliseconds to wait between polls when checking whether trip points have been crossed (0 for interrupt driven systems). diff --git a/Documentation/driver-api/usb/writing_musb_glue_layer.rst b/Documentation/driver-api/usb/writing_musb_glue_layer.rst index 10416cc11cd5..e755c8551bba 100644 --- a/Documentation/driver-api/usb/writing_musb_glue_layer.rst +++ b/Documentation/driver-api/usb/writing_musb_glue_layer.rst @@ -717,4 +717,4 @@ https://www.maximintegrated.com/app-notes/index.mvp/id/1822 :ref:`Writing USB Device Drivers <writing-usb-driver>` Texas Instruments USB Configuration Wiki Page: -http://processors.wiki.ti.com/index.php/Usbgeneralpage +https://web.archive.org/web/20201215135015/http://processors.wiki.ti.com/index.php/Usbgeneralpage diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt index bbf029f095cb..156687a7436d 100644 --- a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt +++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt @@ -12,7 +12,7 @@ | arm64: | ok | | csky: | TODO | | hexagon: | TODO | - | loongarch: | TODO | + | loongarch: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/filesystems/gfs2-glocks.rst b/Documentation/filesystems/gfs2-glocks.rst index 8a5842929b60..adc0d4c4d979 100644 --- a/Documentation/filesystems/gfs2-glocks.rst +++ b/Documentation/filesystems/gfs2-glocks.rst @@ -40,14 +40,14 @@ shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O operations. The glocks are basically a lock plus some routines which deal with cache management. The following rules apply for the cache: -========== ========== ============== ========== ============== -Glock mode Cache data Cache Metadata Dirty Data Dirty Metadata -========== ========== ============== ========== ============== - UN No No No No - SH Yes Yes No No - DF No Yes No No - EX Yes Yes Yes Yes -========== ========== ============== ========== ============== +========== ============== ========== ========== ============== +Glock mode Cache Metadata Cache data Dirty Data Dirty Metadata +========== ============== ========== ========== ============== + UN No No No No + DF Yes No No No + SH Yes Yes No No + EX Yes Yes Yes Yes +========== ============== ========== ========== ============== These rules are implemented using the various glock operations which are defined for each type of glock. Not all types of glocks use @@ -55,23 +55,22 @@ all the modes. Only inode glocks use the DF mode for example. Table of glock operations and per type constants: -============= ============================================================= +============== ============================================================= Field Purpose -============= ============================================================= -go_xmote_th Called before remote state change (e.g. to sync dirty data) +============== ============================================================= +go_sync Called before remote state change (e.g. to sync dirty data) go_xmote_bh Called after remote state change (e.g. to refill cache) go_inval Called if remote state change requires invalidating the cache -go_demote_ok Returns boolean value of whether its ok to demote a glock - (e.g. checks timeout, and that there is no cached data) -go_lock Called for the first local holder of a lock -go_unlock Called on the final local unlock of a lock +go_instantiate Called when a glock has been acquired +go_held Called every time a glock holder is acquired go_dump Called to print content of object for debugfs file, or on error to dump glock to the log. -go_type The type of the glock, ``LM_TYPE_*`` go_callback Called if the DLM sends a callback to drop this lock +go_unlocked Called when a glock is unlocked (dlm_unlock()) +go_type The type of the glock, ``LM_TYPE_*`` go_flags GLOF_ASPACE is set, if the glock has an address space associated with it -============= ============================================================= +============== ============================================================= The minimum hold time for each lock is the time after a remote lock grant for which we ignore remote demote requests. This is in order to @@ -82,26 +81,24 @@ to by multiple nodes. By delaying the demotion in response to a remote callback, that gives the userspace program time to make some progress before the pages are unmapped. -There is a plan to try and remove the go_lock and go_unlock callbacks -if possible, in order to try and speed up the fast path though the locking. -Also, eventually we hope to make the glock "EX" mode locally shared -such that any local locking will be done with the i_mutex as required -rather than via the glock. +Eventually, we hope to make the glock "EX" mode locally shared such that any +local locking will be done with the i_mutex as required rather than via the +glock. Locking rules for glock operations: -============= ====================== ============================= +============== ====================== ============================= Operation GLF_LOCK bit lock held gl_lockref.lock spinlock held -============= ====================== ============================= -go_xmote_th Yes No +============== ====================== ============================= +go_sync Yes No go_xmote_bh Yes No go_inval Yes No -go_demote_ok Sometimes Yes -go_lock Yes No -go_unlock Yes No +go_instantiate No No +go_held No No go_dump Sometimes Yes go_callback Sometimes (N/A) Yes -============= ====================== ============================= +go_unlocked Yes No +============== ====================== ============================= .. Note:: diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index 8f5c1ee02e2f..e8e496d23e1d 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -34,6 +34,7 @@ algorithms work. seq_file sharedsubtree idmappings + iomap/index automount-support diff --git a/Documentation/filesystems/iomap/design.rst b/Documentation/filesystems/iomap/design.rst new file mode 100644 index 000000000000..f8ee3427bc1a --- /dev/null +++ b/Documentation/filesystems/iomap/design.rst @@ -0,0 +1,441 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. _iomap_design: + +.. + Dumb style notes to maintain the author's sanity: + Please try to start sentences on separate lines so that + sentence changes don't bleed colors in diff. + Heading decorations are documented in sphinx.rst. + +============== +Library Design +============== + +.. contents:: Table of Contents + :local: + +Introduction +============ + +iomap is a filesystem library for handling common file operations. +The library has two layers: + + 1. A lower layer that provides an iterator over ranges of file offsets. + This layer tries to obtain mappings of each file ranges to storage + from the filesystem, but the storage information is not necessarily + required. + + 2. An upper layer that acts upon the space mappings provided by the + lower layer iterator. + +The iteration can involve mappings of file's logical offset ranges to +physical extents, but the storage layer information is not necessarily +required, e.g. for walking cached file information. +The library exports various APIs for implementing file operations such +as: + + * Pagecache reads and writes + * Folio write faults to the pagecache + * Writeback of dirty folios + * Direct I/O reads and writes + * fsdax I/O reads, writes, loads, and stores + * FIEMAP + * lseek ``SEEK_DATA`` and ``SEEK_HOLE`` + * swapfile activation + +This origins of this library is the file I/O path that XFS once used; it +has now been extended to cover several other operations. + +Who Should Read This? +===================== + +The target audience for this document are filesystem, storage, and +pagecache programmers and code reviewers. + +If you are working on PCI, machine architectures, or device drivers, you +are most likely in the wrong place. + +How Is This Better? +=================== + +Unlike the classic Linux I/O model which breaks file I/O into small +units (generally memory pages or blocks) and looks up space mappings on +the basis of that unit, the iomap model asks the filesystem for the +largest space mappings that it can create for a given file operation and +initiates operations on that basis. +This strategy improves the filesystem's visibility into the size of the +operation being performed, which enables it to combat fragmentation with +larger space allocations when possible. +Larger space mappings improve runtime performance by amortizing the cost +of mapping function calls into the filesystem across a larger amount of +data. + +At a high level, an iomap operation `looks like this +<https://lore.kernel.org/all/ZGbVaewzcCysclPt@dread.disaster.area/>`_: + +1. For each byte in the operation range... + + 1. Obtain a space mapping via ``->iomap_begin`` + + 2. For each sub-unit of work... + + 1. Revalidate the mapping and go back to (1) above, if necessary. + So far only the pagecache operations need to do this. + + 2. Do the work + + 3. Increment operation cursor + + 4. Release the mapping via ``->iomap_end``, if necessary + +Each iomap operation will be covered in more detail below. +This library was covered previously by an `LWN article +<https://lwn.net/Articles/935934/>`_ and a `KernelNewbies page +<https://kernelnewbies.org/KernelProjects/iomap>`_. + +The goal of this document is to provide a brief discussion of the +design and capabilities of iomap, followed by a more detailed catalog +of the interfaces presented by iomap. +If you change iomap, please update this design document. + +File Range Iterator +=================== + +Definitions +----------- + + * **buffer head**: Shattered remnants of the old buffer cache. + + * ``fsblock``: The block size of a file, also known as ``i_blocksize``. + + * ``i_rwsem``: The VFS ``struct inode`` rwsemaphore. + Processes hold this in shared mode to read file state and contents. + Some filesystems may allow shared mode for writes. + Processes often hold this in exclusive mode to change file state and + contents. + + * ``invalidate_lock``: The pagecache ``struct address_space`` + rwsemaphore that protects against folio insertion and removal for + filesystems that support punching out folios below EOF. + Processes wishing to insert folios must hold this lock in shared + mode to prevent removal, though concurrent insertion is allowed. + Processes wishing to remove folios must hold this lock in exclusive + mode to prevent insertions. + Concurrent removals are not allowed. + + * ``dax_read_lock``: The RCU read lock that dax takes to prevent a + device pre-shutdown hook from returning before other threads have + released resources. + + * **filesystem mapping lock**: This synchronization primitive is + internal to the filesystem and must protect the file mapping data + from updates while a mapping is being sampled. + The filesystem author must determine how this coordination should + happen; it does not need to be an actual lock. + + * **iomap internal operation lock**: This is a general term for + synchronization primitives that iomap functions take while holding a + mapping. + A specific example would be taking the folio lock while reading or + writing the pagecache. + + * **pure overwrite**: A write operation that does not require any + metadata or zeroing operations to perform during either submission + or completion. + This implies that the fileystem must have already allocated space + on disk as ``IOMAP_MAPPED`` and the filesystem must not place any + constaints on IO alignment or size. + The only constraints on I/O alignment are device level (minimum I/O + size and alignment, typically sector size). + +``struct iomap`` +---------------- + +The filesystem communicates to the iomap iterator the mapping of +byte ranges of a file to byte ranges of a storage device with the +structure below: + +.. code-block:: c + + struct iomap { + u64 addr; + loff_t offset; + u64 length; + u16 type; + u16 flags; + struct block_device *bdev; + struct dax_device *dax_dev; + voidw *inline_data; + void *private; + const struct iomap_folio_ops *folio_ops; + u64 validity_cookie; + }; + +The fields are as follows: + + * ``offset`` and ``length`` describe the range of file offsets, in + bytes, covered by this mapping. + These fields must always be set by the filesystem. + + * ``type`` describes the type of the space mapping: + + * **IOMAP_HOLE**: No storage has been allocated. + This type must never be returned in response to an ``IOMAP_WRITE`` + operation because writes must allocate and map space, and return + the mapping. + The ``addr`` field must be set to ``IOMAP_NULL_ADDR``. + iomap does not support writing (whether via pagecache or direct + I/O) to a hole. + + * **IOMAP_DELALLOC**: A promise to allocate space at a later time + ("delayed allocation"). + If the filesystem returns IOMAP_F_NEW here and the write fails, the + ``->iomap_end`` function must delete the reservation. + The ``addr`` field must be set to ``IOMAP_NULL_ADDR``. + + * **IOMAP_MAPPED**: The file range maps to specific space on the + storage device. + The device is returned in ``bdev`` or ``dax_dev``. + The device address, in bytes, is returned via ``addr``. + + * **IOMAP_UNWRITTEN**: The file range maps to specific space on the + storage device, but the space has not yet been initialized. + The device is returned in ``bdev`` or ``dax_dev``. + The device address, in bytes, is returned via ``addr``. + Reads from this type of mapping will return zeroes to the caller. + For a write or writeback operation, the ioend should update the + mapping to MAPPED. + Refer to the sections about ioends for more details. + + * **IOMAP_INLINE**: The file range maps to the memory buffer + specified by ``inline_data``. + For write operation, the ``->iomap_end`` function presumably + handles persisting the data. + The ``addr`` field must be set to ``IOMAP_NULL_ADDR``. + + * ``flags`` describe the status of the space mapping. + These flags should be set by the filesystem in ``->iomap_begin``: + + * **IOMAP_F_NEW**: The space under the mapping is newly allocated. + Areas that will not be written to must be zeroed. + If a write fails and the mapping is a space reservation, the + reservation must be deleted. + + * **IOMAP_F_DIRTY**: The inode will have uncommitted metadata needed + to access any data written. + fdatasync is required to commit these changes to persistent + storage. + This needs to take into account metadata changes that *may* be made + at I/O completion, such as file size updates from direct I/O. + + * **IOMAP_F_SHARED**: The space under the mapping is shared. + Copy on write is necessary to avoid corrupting other file data. + + * **IOMAP_F_BUFFER_HEAD**: This mapping requires the use of buffer + heads for pagecache operations. + Do not add more uses of this. + + * **IOMAP_F_MERGED**: Multiple contiguous block mappings were + coalesced into this single mapping. + This is only useful for FIEMAP. + + * **IOMAP_F_XATTR**: The mapping is for extended attribute data, not + regular file data. + This is only useful for FIEMAP. + + * **IOMAP_F_PRIVATE**: Starting with this value, the upper bits can + be set by the filesystem for its own purposes. + + These flags can be set by iomap itself during file operations. + The filesystem should supply an ``->iomap_end`` function if it needs + to observe these flags: + + * **IOMAP_F_SIZE_CHANGED**: The file size has changed as a result of + using this mapping. + + * **IOMAP_F_STALE**: The mapping was found to be stale. + iomap will call ``->iomap_end`` on this mapping and then + ``->iomap_begin`` to obtain a new mapping. + + Currently, these flags are only set by pagecache operations. + + * ``addr`` describes the device address, in bytes. + + * ``bdev`` describes the block device for this mapping. + This only needs to be set for mapped or unwritten operations. + + * ``dax_dev`` describes the DAX device for this mapping. + This only needs to be set for mapped or unwritten operations, and + only for a fsdax operation. + + * ``inline_data`` points to a memory buffer for I/O involving + ``IOMAP_INLINE`` mappings. + This value is ignored for all other mapping types. + + * ``private`` is a pointer to `filesystem-private information + <https://lore.kernel.org/all/20180619164137.13720-7-hch@lst.de/>`_. + This value will be passed unchanged to ``->iomap_end``. + + * ``folio_ops`` will be covered in the section on pagecache operations. + + * ``validity_cookie`` is a magic freshness value set by the filesystem + that should be used to detect stale mappings. + For pagecache operations this is critical for correct operation + because page faults can occur, which implies that filesystem locks + should not be held between ``->iomap_begin`` and ``->iomap_end``. + Filesystems with completely static mappings need not set this value. + Only pagecache operations revalidate mappings; see the section about + ``iomap_valid`` for details. + +``struct iomap_ops`` +-------------------- + +Every iomap function requires the filesystem to pass an operations +structure to obtain a mapping and (optionally) to release the mapping: + +.. code-block:: c + + struct iomap_ops { + int (*iomap_begin)(struct inode *inode, loff_t pos, loff_t length, + unsigned flags, struct iomap *iomap, + struct iomap *srcmap); + + int (*iomap_end)(struct inode *inode, loff_t pos, loff_t length, + ssize_t written, unsigned flags, + struct iomap *iomap); + }; + +``->iomap_begin`` +~~~~~~~~~~~~~~~~~ + +iomap operations call ``->iomap_begin`` to obtain one file mapping for +the range of bytes specified by ``pos`` and ``length`` for the file +``inode``. +This mapping should be returned through the ``iomap`` pointer. +The mapping must cover at least the first byte of the supplied file +range, but it does not need to cover the entire requested range. + +Each iomap operation describes the requested operation through the +``flags`` argument. +The exact value of ``flags`` will be documented in the +operation-specific sections below. +These flags can, at least in principle, apply generally to iomap +operations: + + * ``IOMAP_DIRECT`` is set when the caller wishes to issue file I/O to + block storage. + + * ``IOMAP_DAX`` is set when the caller wishes to issue file I/O to + memory-like storage. + + * ``IOMAP_NOWAIT`` is set when the caller wishes to perform a best + effort attempt to avoid any operation that would result in blocking + the submitting task. + This is similar in intent to ``O_NONBLOCK`` for network APIs - it is + intended for asynchronous applications to keep doing other work + instead of waiting for the specific unavailable filesystem resource + to become available. + Filesystems implementing ``IOMAP_NOWAIT`` semantics need to use + trylock algorithms. + They need to be able to satisfy the entire I/O request range with a + single iomap mapping. + They need to avoid reading or writing metadata synchronously. + They need to avoid blocking memory allocations. + They need to avoid waiting on transaction reservations to allow + modifications to take place. + They probably should not be allocating new space. + And so on. + If there is any doubt in the filesystem developer's mind as to + whether any specific ``IOMAP_NOWAIT`` operation may end up blocking, + then they should return ``-EAGAIN`` as early as possible rather than + start the operation and force the submitting task to block. + ``IOMAP_NOWAIT`` is often set on behalf of ``IOCB_NOWAIT`` or + ``RWF_NOWAIT``. + +If it is necessary to read existing file contents from a `different +<https://lore.kernel.org/all/20191008071527.29304-9-hch@lst.de/>`_ +device or address range on a device, the filesystem should return that +information via ``srcmap``. +Only pagecache and fsdax operations support reading from one mapping and +writing to another. + +``->iomap_end`` +~~~~~~~~~~~~~~~ + +After the operation completes, the ``->iomap_end`` function, if present, +is called to signal that iomap is finished with a mapping. +Typically, implementations will use this function to tear down any +context that were set up in ``->iomap_begin``. +For example, a write might wish to commit the reservations for the bytes +that were operated upon and unreserve any space that was not operated +upon. +``written`` might be zero if no bytes were touched. +``flags`` will contain the same value passed to ``->iomap_begin``. +iomap ops for reads are not likely to need to supply this function. + +Both functions should return a negative errno code on error, or zero on +success. + +Preparing for File Operations +============================= + +iomap only handles mapping and I/O. +Filesystems must still call out to the VFS to check input parameters +and file state before initiating an I/O operation. +It does not handle obtaining filesystem freeze protection, updating of +timestamps, stripping privileges, or access control. + +Locking Hierarchy +================= + +iomap requires that filesystems supply their own locking model. +There are three categories of synchronization primitives, as far as +iomap is concerned: + + * The **upper** level primitive is provided by the filesystem to + coordinate access to different iomap operations. + The exact primitive is specifc to the filesystem and operation, + but is often a VFS inode, pagecache invalidation, or folio lock. + For example, a filesystem might take ``i_rwsem`` before calling + ``iomap_file_buffered_write`` and ``iomap_file_unshare`` to prevent + these two file operations from clobbering each other. + Pagecache writeback may lock a folio to prevent other threads from + accessing the folio until writeback is underway. + + * The **lower** level primitive is taken by the filesystem in the + ``->iomap_begin`` and ``->iomap_end`` functions to coordinate + access to the file space mapping information. + The fields of the iomap object should be filled out while holding + this primitive. + The upper level synchronization primitive, if any, remains held + while acquiring the lower level synchronization primitive. + For example, XFS takes ``ILOCK_EXCL`` and ext4 takes ``i_data_sem`` + while sampling mappings. + Filesystems with immutable mapping information may not require + synchronization here. + + * The **operation** primitive is taken by an iomap operation to + coordinate access to its own internal data structures. + The upper level synchronization primitive, if any, remains held + while acquiring this primitive. + The lower level primitive is not held while acquiring this + primitive. + For example, pagecache write operations will obtain a file mapping, + then grab and lock a folio to copy new contents. + It may also lock an internal folio state object to update metadata. + +The exact locking requirements are specific to the filesystem; for +certain operations, some of these locks can be elided. +All further mention of locking are *recommendations*, not mandates. +Each filesystem author must figure out the locking for themself. + +Bugs and Limitations +==================== + + * No support for fscrypt. + * No support for compression. + * No support for fsverity yet. + * Strong assumptions that IO should work the way it does on XFS. + * Does iomap *actually* work for non-regular file data? + +Patches welcome! diff --git a/Documentation/filesystems/iomap/index.rst b/Documentation/filesystems/iomap/index.rst new file mode 100644 index 000000000000..3c6a52440250 --- /dev/null +++ b/Documentation/filesystems/iomap/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +VFS iomap Documentation +======================= + +.. toctree:: + :maxdepth: 2 + :numbered: + + design + operations + porting diff --git a/Documentation/filesystems/iomap/operations.rst b/Documentation/filesystems/iomap/operations.rst new file mode 100644 index 000000000000..8e6c721d2330 --- /dev/null +++ b/Documentation/filesystems/iomap/operations.rst @@ -0,0 +1,713 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. _iomap_operations: + +.. + Dumb style notes to maintain the author's sanity: + Please try to start sentences on separate lines so that + sentence changes don't bleed colors in diff. + Heading decorations are documented in sphinx.rst. + +========================= +Supported File Operations +========================= + +.. contents:: Table of Contents + :local: + +Below are a discussion of the high level file operations that iomap +implements. + +Buffered I/O +============ + +Buffered I/O is the default file I/O path in Linux. +File contents are cached in memory ("pagecache") to satisfy reads and +writes. +Dirty cache will be written back to disk at some point that can be +forced via ``fsync`` and variants. + +iomap implements nearly all the folio and pagecache management that +filesystems have to implement themselves under the legacy I/O model. +This means that the filesystem need not know the details of allocating, +mapping, managing uptodate and dirty state, or writeback of pagecache +folios. +Under the legacy I/O model, this was managed very inefficiently with +linked lists of buffer heads instead of the per-folio bitmaps that iomap +uses. +Unless the filesystem explicitly opts in to buffer heads, they will not +be used, which makes buffered I/O much more efficient, and the pagecache +maintainer much happier. + +``struct address_space_operations`` +----------------------------------- + +The following iomap functions can be referenced directly from the +address space operations structure: + + * ``iomap_dirty_folio`` + * ``iomap_release_folio`` + * ``iomap_invalidate_folio`` + * ``iomap_is_partially_uptodate`` + +The following address space operations can be wrapped easily: + + * ``read_folio`` + * ``readahead`` + * ``writepages`` + * ``bmap`` + * ``swap_activate`` + +``struct iomap_folio_ops`` +-------------------------- + +The ``->iomap_begin`` function for pagecache operations may set the +``struct iomap::folio_ops`` field to an ops structure to override +default behaviors of iomap: + +.. code-block:: c + + struct iomap_folio_ops { + struct folio *(*get_folio)(struct iomap_iter *iter, loff_t pos, + unsigned len); + void (*put_folio)(struct inode *inode, loff_t pos, unsigned copied, + struct folio *folio); + bool (*iomap_valid)(struct inode *inode, const struct iomap *iomap); + }; + +iomap calls these functions: + + - ``get_folio``: Called to allocate and return an active reference to + a locked folio prior to starting a write. + If this function is not provided, iomap will call + ``iomap_get_folio``. + This could be used to `set up per-folio filesystem state + <https://lore.kernel.org/all/20190429220934.10415-5-agruenba@redhat.com/>`_ + for a write. + + - ``put_folio``: Called to unlock and put a folio after a pagecache + operation completes. + If this function is not provided, iomap will ``folio_unlock`` and + ``folio_put`` on its own. + This could be used to `commit per-folio filesystem state + <https://lore.kernel.org/all/20180619164137.13720-6-hch@lst.de/>`_ + that was set up by ``->get_folio``. + + - ``iomap_valid``: The filesystem may not hold locks between + ``->iomap_begin`` and ``->iomap_end`` because pagecache operations + can take folio locks, fault on userspace pages, initiate writeback + for memory reclamation, or engage in other time-consuming actions. + If a file's space mapping data are mutable, it is possible that the + mapping for a particular pagecache folio can `change in the time it + takes + <https://lore.kernel.org/all/20221123055812.747923-8-david@fromorbit.com/>`_ + to allocate, install, and lock that folio. + + For the pagecache, races can happen if writeback doesn't take + ``i_rwsem`` or ``invalidate_lock`` and updates mapping information. + Races can also happen if the filesytem allows concurrent writes. + For such files, the mapping *must* be revalidated after the folio + lock has been taken so that iomap can manage the folio correctly. + + fsdax does not need this revalidation because there's no writeback + and no support for unwritten extents. + + Filesystems subject to this kind of race must provide a + ``->iomap_valid`` function to decide if the mapping is still valid. + If the mapping is not valid, the mapping will be sampled again. + + To support making the validity decision, the filesystem's + ``->iomap_begin`` function may set ``struct iomap::validity_cookie`` + at the same time that it populates the other iomap fields. + A simple validation cookie implementation is a sequence counter. + If the filesystem bumps the sequence counter every time it modifies + the inode's extent map, it can be placed in the ``struct + iomap::validity_cookie`` during ``->iomap_begin``. + If the value in the cookie is found to be different to the value + the filesystem holds when the mapping is passed back to + ``->iomap_valid``, then the iomap should considered stale and the + validation failed. + +These ``struct kiocb`` flags are significant for buffered I/O with iomap: + + * ``IOCB_NOWAIT``: Turns on ``IOMAP_NOWAIT``. + +Internal per-Folio State +------------------------ + +If the fsblock size matches the size of a pagecache folio, it is assumed +that all disk I/O operations will operate on the entire folio. +The uptodate (memory contents are at least as new as what's on disk) and +dirty (memory contents are newer than what's on disk) status of the +folio are all that's needed for this case. + +If the fsblock size is less than the size of a pagecache folio, iomap +tracks the per-fsblock uptodate and dirty state itself. +This enables iomap to handle both "bs < ps" `filesystems +<https://lore.kernel.org/all/20230725122932.144426-1-ritesh.list@gmail.com/>`_ +and large folios in the pagecache. + +iomap internally tracks two state bits per fsblock: + + * ``uptodate``: iomap will try to keep folios fully up to date. + If there are read(ahead) errors, those fsblocks will not be marked + uptodate. + The folio itself will be marked uptodate when all fsblocks within the + folio are uptodate. + + * ``dirty``: iomap will set the per-block dirty state when programs + write to the file. + The folio itself will be marked dirty when any fsblock within the + folio is dirty. + +iomap also tracks the amount of read and write disk IOs that are in +flight. +This structure is much lighter weight than ``struct buffer_head`` +because there is only one per folio, and the per-fsblock overhead is two +bits vs. 104 bytes. + +Filesystems wishing to turn on large folios in the pagecache should call +``mapping_set_large_folios`` when initializing the incore inode. + +Buffered Readahead and Reads +---------------------------- + +The ``iomap_readahead`` function initiates readahead to the pagecache. +The ``iomap_read_folio`` function reads one folio's worth of data into +the pagecache. +The ``flags`` argument to ``->iomap_begin`` will be set to zero. +The pagecache takes whatever locks it needs before calling the +filesystem. + +Buffered Writes +--------------- + +The ``iomap_file_buffered_write`` function writes an ``iocb`` to the +pagecache. +``IOMAP_WRITE`` or ``IOMAP_WRITE`` | ``IOMAP_NOWAIT`` will be passed as +the ``flags`` argument to ``->iomap_begin``. +Callers commonly take ``i_rwsem`` in either shared or exclusive mode +before calling this function. + +mmap Write Faults +~~~~~~~~~~~~~~~~~ + +The ``iomap_page_mkwrite`` function handles a write fault to a folio in +the pagecache. +``IOMAP_WRITE | IOMAP_FAULT`` will be passed as the ``flags`` argument +to ``->iomap_begin``. +Callers commonly take the mmap ``invalidate_lock`` in shared or +exclusive mode before calling this function. + +Buffered Write Failures +~~~~~~~~~~~~~~~~~~~~~~~ + +After a short write to the pagecache, the areas not written will not +become marked dirty. +The filesystem must arrange to `cancel +<https://lore.kernel.org/all/20221123055812.747923-6-david@fromorbit.com/>`_ +such `reservations +<https://lore.kernel.org/linux-xfs/20220817093627.GZ3600936@dread.disaster.area/>`_ +because writeback will not consume the reservation. +The ``iomap_file_buffered_write_punch_delalloc`` can be called from a +``->iomap_end`` function to find all the clean areas of the folios +caching a fresh (``IOMAP_F_NEW``) delalloc mapping. +It takes the ``invalidate_lock``. + +The filesystem must supply a function ``punch`` to be called for +each file range in this state. +This function must *only* remove delayed allocation reservations, in +case another thread racing with the current thread writes successfully +to the same region and triggers writeback to flush the dirty data out to +disk. + +Zeroing for File Operations +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Filesystems can call ``iomap_zero_range`` to perform zeroing of the +pagecache for non-truncation file operations that are not aligned to +the fsblock size. +``IOMAP_ZERO`` will be passed as the ``flags`` argument to +``->iomap_begin``. +Callers typically hold ``i_rwsem`` and ``invalidate_lock`` in exclusive +mode before calling this function. + +Unsharing Reflinked File Data +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Filesystems can call ``iomap_file_unshare`` to force a file sharing +storage with another file to preemptively copy the shared data to newly +allocate storage. +``IOMAP_WRITE | IOMAP_UNSHARE`` will be passed as the ``flags`` argument +to ``->iomap_begin``. +Callers typically hold ``i_rwsem`` and ``invalidate_lock`` in exclusive +mode before calling this function. + +Truncation +---------- + +Filesystems can call ``iomap_truncate_page`` to zero the bytes in the +pagecache from EOF to the end of the fsblock during a file truncation +operation. +``truncate_setsize`` or ``truncate_pagecache`` will take care of +everything after the EOF block. +``IOMAP_ZERO`` will be passed as the ``flags`` argument to +``->iomap_begin``. +Callers typically hold ``i_rwsem`` and ``invalidate_lock`` in exclusive +mode before calling this function. + +Pagecache Writeback +------------------- + +Filesystems can call ``iomap_writepages`` to respond to a request to +write dirty pagecache folios to disk. +The ``mapping`` and ``wbc`` parameters should be passed unchanged. +The ``wpc`` pointer should be allocated by the filesystem and must +be initialized to zero. + +The pagecache will lock each folio before trying to schedule it for +writeback. +It does not lock ``i_rwsem`` or ``invalidate_lock``. + +The dirty bit will be cleared for all folios run through the +``->map_blocks`` machinery described below even if the writeback fails. +This is to prevent dirty folio clots when storage devices fail; an +``-EIO`` is recorded for userspace to collect via ``fsync``. + +The ``ops`` structure must be specified and is as follows: + +``struct iomap_writeback_ops`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: c + + struct iomap_writeback_ops { + int (*map_blocks)(struct iomap_writepage_ctx *wpc, struct inode *inode, + loff_t offset, unsigned len); + int (*prepare_ioend)(struct iomap_ioend *ioend, int status); + void (*discard_folio)(struct folio *folio, loff_t pos); + }; + +The fields are as follows: + + - ``map_blocks``: Sets ``wpc->iomap`` to the space mapping of the file + range (in bytes) given by ``offset`` and ``len``. + iomap calls this function for each dirty fs block in each dirty folio, + though it will `reuse mappings + <https://lore.kernel.org/all/20231207072710.176093-15-hch@lst.de/>`_ + for runs of contiguous dirty fsblocks within a folio. + Do not return ``IOMAP_INLINE`` mappings here; the ``->iomap_end`` + function must deal with persisting written data. + Do not return ``IOMAP_DELALLOC`` mappings here; iomap currently + requires mapping to allocated space. + Filesystems can skip a potentially expensive mapping lookup if the + mappings have not changed. + This revalidation must be open-coded by the filesystem; it is + unclear if ``iomap::validity_cookie`` can be reused for this + purpose. + This function must be supplied by the filesystem. + + - ``prepare_ioend``: Enables filesystems to transform the writeback + ioend or perform any other preparatory work before the writeback I/O + is submitted. + This might include pre-write space accounting updates, or installing + a custom ``->bi_end_io`` function for internal purposes, such as + deferring the ioend completion to a workqueue to run metadata update + transactions from process context. + This function is optional. + + - ``discard_folio``: iomap calls this function after ``->map_blocks`` + fails to schedule I/O for any part of a dirty folio. + The function should throw away any reservations that may have been + made for the write. + The folio will be marked clean and an ``-EIO`` recorded in the + pagecache. + Filesystems can use this callback to `remove + <https://lore.kernel.org/all/20201029163313.1766967-1-bfoster@redhat.com/>`_ + delalloc reservations to avoid having delalloc reservations for + clean pagecache. + This function is optional. + +Pagecache Writeback Completion +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To handle the bookkeeping that must happen after disk I/O for writeback +completes, iomap creates chains of ``struct iomap_ioend`` objects that +wrap the ``bio`` that is used to write pagecache data to disk. +By default, iomap finishes writeback ioends by clearing the writeback +bit on the folios attached to the ``ioend``. +If the write failed, it will also set the error bits on the folios and +the address space. +This can happen in interrupt or process context, depending on the +storage device. + +Filesystems that need to update internal bookkeeping (e.g. unwritten +extent conversions) should provide a ``->prepare_ioend`` function to +set ``struct iomap_end::bio::bi_end_io`` to its own function. +This function should call ``iomap_finish_ioends`` after finishing its +own work (e.g. unwritten extent conversion). + +Some filesystems may wish to `amortize the cost of running metadata +transactions +<https://lore.kernel.org/all/20220120034733.221737-1-david@fromorbit.com/>`_ +for post-writeback updates by batching them. +They may also require transactions to run from process context, which +implies punting batches to a workqueue. +iomap ioends contain a ``list_head`` to enable batching. + +Given a batch of ioends, iomap has a few helpers to assist with +amortization: + + * ``iomap_sort_ioends``: Sort all the ioends in the list by file + offset. + + * ``iomap_ioend_try_merge``: Given an ioend that is not in any list and + a separate list of sorted ioends, merge as many of the ioends from + the head of the list into the given ioend. + ioends can only be merged if the file range and storage addresses are + contiguous; the unwritten and shared status are the same; and the + write I/O outcome is the same. + The merged ioends become their own list. + + * ``iomap_finish_ioends``: Finish an ioend that possibly has other + ioends linked to it. + +Direct I/O +========== + +In Linux, direct I/O is defined as file I/O that is issued directly to +storage, bypassing the pagecache. +The ``iomap_dio_rw`` function implements O_DIRECT (direct I/O) reads and +writes for files. + +.. code-block:: c + + ssize_t iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, + const struct iomap_ops *ops, + const struct iomap_dio_ops *dops, + unsigned int dio_flags, void *private, + size_t done_before); + +The filesystem can provide the ``dops`` parameter if it needs to perform +extra work before or after the I/O is issued to storage. +The ``done_before`` parameter tells the how much of the request has +already been transferred. +It is used to continue a request asynchronously when `part of the +request +<https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c03098d4b9ad76bca2966a8769dcfe59f7f85103>`_ +has already been completed synchronously. + +The ``done_before`` parameter should be set if writes for the ``iocb`` +have been initiated prior to the call. +The direction of the I/O is determined from the ``iocb`` passed in. + +The ``dio_flags`` argument can be set to any combination of the +following values: + + * ``IOMAP_DIO_FORCE_WAIT``: Wait for the I/O to complete even if the + kiocb is not synchronous. + + * ``IOMAP_DIO_OVERWRITE_ONLY``: Perform a pure overwrite for this range + or fail with ``-EAGAIN``. + This can be used by filesystems with complex unaligned I/O + write paths to provide an optimised fast path for unaligned writes. + If a pure overwrite can be performed, then serialisation against + other I/Os to the same filesystem block(s) is unnecessary as there is + no risk of stale data exposure or data loss. + If a pure overwrite cannot be performed, then the filesystem can + perform the serialisation steps needed to provide exclusive access + to the unaligned I/O range so that it can perform allocation and + sub-block zeroing safely. + Filesystems can use this flag to try to reduce locking contention, + but a lot of `detailed checking + <https://lore.kernel.org/linux-ext4/20230314130759.642710-1-bfoster@redhat.com/>`_ + is required to do it `correctly + <https://lore.kernel.org/linux-ext4/20230810165559.946222-1-bfoster@redhat.com/>`_. + + * ``IOMAP_DIO_PARTIAL``: If a page fault occurs, return whatever + progress has already been made. + The caller may deal with the page fault and retry the operation. + If the caller decides to retry the operation, it should pass the + accumulated return values of all previous calls as the + ``done_before`` parameter to the next call. + +These ``struct kiocb`` flags are significant for direct I/O with iomap: + + * ``IOCB_NOWAIT``: Turns on ``IOMAP_NOWAIT``. + + * ``IOCB_SYNC``: Ensure that the device has persisted data to disk + before completing the call. + In the case of pure overwrites, the I/O may be issued with FUA + enabled. + + * ``IOCB_HIPRI``: Poll for I/O completion instead of waiting for an + interrupt. + Only meaningful for asynchronous I/O, and only if the entire I/O can + be issued as a single ``struct bio``. + + * ``IOCB_DIO_CALLER_COMP``: Try to run I/O completion from the caller's + process context. + See ``linux/fs.h`` for more details. + +Filesystems should call ``iomap_dio_rw`` from ``->read_iter`` and +``->write_iter``, and set ``FMODE_CAN_ODIRECT`` in the ``->open`` +function for the file. +They should not set ``->direct_IO``, which is deprecated. + +If a filesystem wishes to perform its own work before direct I/O +completion, it should call ``__iomap_dio_rw``. +If its return value is not an error pointer or a NULL pointer, the +filesystem should pass the return value to ``iomap_dio_complete`` after +finishing its internal work. + +Return Values +------------- + +``iomap_dio_rw`` can return one of the following: + + * A non-negative number of bytes transferred. + + * ``-ENOTBLK``: Fall back to buffered I/O. + iomap itself will return this value if it cannot invalidate the page + cache before issuing the I/O to storage. + The ``->iomap_begin`` or ``->iomap_end`` functions may also return + this value. + + * ``-EIOCBQUEUED``: The asynchronous direct I/O request has been + queued and will be completed separately. + + * Any of the other negative error codes. + +Direct Reads +------------ + +A direct I/O read initiates a read I/O from the storage device to the +caller's buffer. +Dirty parts of the pagecache are flushed to storage before initiating +the read io. +The ``flags`` value for ``->iomap_begin`` will be ``IOMAP_DIRECT`` with +any combination of the following enhancements: + + * ``IOMAP_NOWAIT``, as defined previously. + +Callers commonly hold ``i_rwsem`` in shared mode before calling this +function. + +Direct Writes +------------- + +A direct I/O write initiates a write I/O to the storage device from the +caller's buffer. +Dirty parts of the pagecache are flushed to storage before initiating +the write io. +The pagecache is invalidated both before and after the write io. +The ``flags`` value for ``->iomap_begin`` will be ``IOMAP_DIRECT | +IOMAP_WRITE`` with any combination of the following enhancements: + + * ``IOMAP_NOWAIT``, as defined previously. + + * ``IOMAP_OVERWRITE_ONLY``: Allocating blocks and zeroing partial + blocks is not allowed. + The entire file range must map to a single written or unwritten + extent. + The file I/O range must be aligned to the filesystem block size + if the mapping is unwritten and the filesystem cannot handle zeroing + the unaligned regions without exposing stale contents. + +Callers commonly hold ``i_rwsem`` in shared or exclusive mode before +calling this function. + +``struct iomap_dio_ops:`` +------------------------- +.. code-block:: c + + struct iomap_dio_ops { + void (*submit_io)(const struct iomap_iter *iter, struct bio *bio, + loff_t file_offset); + int (*end_io)(struct kiocb *iocb, ssize_t size, int error, + unsigned flags); + struct bio_set *bio_set; + }; + +The fields of this structure are as follows: + + - ``submit_io``: iomap calls this function when it has constructed a + ``struct bio`` object for the I/O requested, and wishes to submit it + to the block device. + If no function is provided, ``submit_bio`` will be called directly. + Filesystems that would like to perform additional work before (e.g. + data replication for btrfs) should implement this function. + + - ``end_io``: This is called after the ``struct bio`` completes. + This function should perform post-write conversions of unwritten + extent mappings, handle write failures, etc. + The ``flags`` argument may be set to a combination of the following: + + * ``IOMAP_DIO_UNWRITTEN``: The mapping was unwritten, so the ioend + should mark the extent as written. + + * ``IOMAP_DIO_COW``: Writing to the space in the mapping required a + copy on write operation, so the ioend should switch mappings. + + - ``bio_set``: This allows the filesystem to provide a custom bio_set + for allocating direct I/O bios. + This enables filesystems to `stash additional per-bio information + <https://lore.kernel.org/all/20220505201115.937837-3-hch@lst.de/>`_ + for private use. + If this field is NULL, generic ``struct bio`` objects will be used. + +Filesystems that want to perform extra work after an I/O completion +should set a custom ``->bi_end_io`` function via ``->submit_io``. +Afterwards, the custom endio function must call +``iomap_dio_bio_end_io`` to finish the direct I/O. + +DAX I/O +======= + +Some storage devices can be directly mapped as memory. +These devices support a new access mode known as "fsdax" that allows +loads and stores through the CPU and memory controller. + +fsdax Reads +----------- + +A fsdax read performs a memcpy from storage device to the caller's +buffer. +The ``flags`` value for ``->iomap_begin`` will be ``IOMAP_DAX`` with any +combination of the following enhancements: + + * ``IOMAP_NOWAIT``, as defined previously. + +Callers commonly hold ``i_rwsem`` in shared mode before calling this +function. + +fsdax Writes +------------ + +A fsdax write initiates a memcpy to the storage device from the caller's +buffer. +The ``flags`` value for ``->iomap_begin`` will be ``IOMAP_DAX | +IOMAP_WRITE`` with any combination of the following enhancements: + + * ``IOMAP_NOWAIT``, as defined previously. + + * ``IOMAP_OVERWRITE_ONLY``: The caller requires a pure overwrite to be + performed from this mapping. + This requires the filesystem extent mapping to already exist as an + ``IOMAP_MAPPED`` type and span the entire range of the write I/O + request. + If the filesystem cannot map this request in a way that allows the + iomap infrastructure to perform a pure overwrite, it must fail the + mapping operation with ``-EAGAIN``. + +Callers commonly hold ``i_rwsem`` in exclusive mode before calling this +function. + +fsdax mmap Faults +~~~~~~~~~~~~~~~~~ + +The ``dax_iomap_fault`` function handles read and write faults to fsdax +storage. +For a read fault, ``IOMAP_DAX | IOMAP_FAULT`` will be passed as the +``flags`` argument to ``->iomap_begin``. +For a write fault, ``IOMAP_DAX | IOMAP_FAULT | IOMAP_WRITE`` will be +passed as the ``flags`` argument to ``->iomap_begin``. + +Callers commonly hold the same locks as they do to call their iomap +pagecache counterparts. + +fsdax Truncation, fallocate, and Unsharing +------------------------------------------ + +For fsdax files, the following functions are provided to replace their +iomap pagecache I/O counterparts. +The ``flags`` argument to ``->iomap_begin`` are the same as the +pagecache counterparts, with ``IOMAP_DAX`` added. + + * ``dax_file_unshare`` + * ``dax_zero_range`` + * ``dax_truncate_page`` + +Callers commonly hold the same locks as they do to call their iomap +pagecache counterparts. + +fsdax Deduplication +------------------- + +Filesystems implementing the ``FIDEDUPERANGE`` ioctl must call the +``dax_remap_file_range_prep`` function with their own iomap read ops. + +Seeking Files +============= + +iomap implements the two iterating whence modes of the ``llseek`` system +call. + +SEEK_DATA +--------- + +The ``iomap_seek_data`` function implements the SEEK_DATA "whence" value +for llseek. +``IOMAP_REPORT`` will be passed as the ``flags`` argument to +``->iomap_begin``. + +For unwritten mappings, the pagecache will be searched. +Regions of the pagecache with a folio mapped and uptodate fsblocks +within those folios will be reported as data areas. + +Callers commonly hold ``i_rwsem`` in shared mode before calling this +function. + +SEEK_HOLE +--------- + +The ``iomap_seek_hole`` function implements the SEEK_HOLE "whence" value +for llseek. +``IOMAP_REPORT`` will be passed as the ``flags`` argument to +``->iomap_begin``. + +For unwritten mappings, the pagecache will be searched. +Regions of the pagecache with no folio mapped, or a !uptodate fsblock +within a folio will be reported as sparse hole areas. + +Callers commonly hold ``i_rwsem`` in shared mode before calling this +function. + +Swap File Activation +==================== + +The ``iomap_swapfile_activate`` function finds all the base-page aligned +regions in a file and sets them up as swap space. +The file will be ``fsync()``'d before activation. +``IOMAP_REPORT`` will be passed as the ``flags`` argument to +``->iomap_begin``. +All mappings must be mapped or unwritten; cannot be dirty or shared, and +cannot span multiple block devices. +Callers must hold ``i_rwsem`` in exclusive mode; this is already +provided by ``swapon``. + +File Space Mapping Reporting +============================ + +iomap implements two of the file space mapping system calls. + +FS_IOC_FIEMAP +------------- + +The ``iomap_fiemap`` function exports file extent mappings to userspace +in the format specified by the ``FS_IOC_FIEMAP`` ioctl. +``IOMAP_REPORT`` will be passed as the ``flags`` argument to +``->iomap_begin``. +Callers commonly hold ``i_rwsem`` in shared mode before calling this +function. + +FIBMAP (deprecated) +------------------- + +``iomap_bmap`` implements FIBMAP. +The calling conventions are the same as for FIEMAP. +This function is only provided to maintain compatibility for filesystems +that implemented FIBMAP prior to conversion. +This ioctl is deprecated; do **not** add a FIBMAP implementation to +filesystems that do not have it. +Callers should probably hold ``i_rwsem`` in shared mode before calling +this function, but this is unclear. diff --git a/Documentation/filesystems/iomap/porting.rst b/Documentation/filesystems/iomap/porting.rst new file mode 100644 index 000000000000..3d49a32c0fff --- /dev/null +++ b/Documentation/filesystems/iomap/porting.rst @@ -0,0 +1,120 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. _iomap_porting: + +.. + Dumb style notes to maintain the author's sanity: + Please try to start sentences on separate lines so that + sentence changes don't bleed colors in diff. + Heading decorations are documented in sphinx.rst. + +======================= +Porting Your Filesystem +======================= + +.. contents:: Table of Contents + :local: + +Why Convert? +============ + +There are several reasons to convert a filesystem to iomap: + + 1. The classic Linux I/O path is not terribly efficient. + Pagecache operations lock a single base page at a time and then call + into the filesystem to return a mapping for only that page. + Direct I/O operations build I/O requests a single file block at a + time. + This worked well enough for direct/indirect-mapped filesystems such + as ext2, but is very inefficient for extent-based filesystems such + as XFS. + + 2. Large folios are only supported via iomap; there are no plans to + convert the old buffer_head path to use them. + + 3. Direct access to storage on memory-like devices (fsdax) is only + supported via iomap. + + 4. Lower maintenance overhead for individual filesystem maintainers. + iomap handles common pagecache related operations itself, such as + allocating, instantiating, locking, and unlocking of folios. + No ->write_begin(), ->write_end() or direct_IO + address_space_operations are required to be implemented by + filesystem using iomap. + +How Do I Convert a Filesystem? +============================== + +First, add ``#include <linux/iomap.h>`` from your source code and add +``select FS_IOMAP`` to your filesystem's Kconfig option. +Build the kernel, run fstests with the ``-g all`` option across a wide +variety of your filesystem's supported configurations to build a +baseline of which tests pass and which ones fail. + +The recommended approach is first to implement ``->iomap_begin`` (and +``->iomap_end`` if necessary) to allow iomap to obtain a read-only +mapping of a file range. +In most cases, this is a relatively trivial conversion of the existing +``get_block()`` function for read-only mappings. +``FS_IOC_FIEMAP`` is a good first target because it is trivial to +implement support for it and then to determine that the extent map +iteration is correct from userspace. +If FIEMAP is returning the correct information, it's a good sign that +other read-only mapping operations will do the right thing. + +Next, modify the filesystem's ``get_block(create = false)`` +implementation to use the new ``->iomap_begin`` implementation to map +file space for selected read operations. +Hide behind a debugging knob the ability to switch on the iomap mapping +functions for selected call paths. +It is necessary to write some code to fill out the bufferhead-based +mapping information from the ``iomap`` structure, but the new functions +can be tested without needing to implement any iomap APIs. + +Once the read-only functions are working like this, convert each high +level file operation one by one to use iomap native APIs instead of +going through ``get_block()``. +Done one at a time, regressions should be self evident. +You *do* have a regression test baseline for fstests, right? +It is suggested to convert swap file activation, ``SEEK_DATA``, and +``SEEK_HOLE`` before tackling the I/O paths. +A likely complexity at this point will be converting the buffered read +I/O path because of bufferheads. +The buffered read I/O paths doesn't need to be converted yet, though the +direct I/O read path should be converted in this phase. + +At this point, you should look over your ``->iomap_begin`` function. +If it switches between large blocks of code based on dispatching of the +``flags`` argument, you should consider breaking it up into +per-operation iomap ops with smaller, more cohesive functions. +XFS is a good example of this. + +The next thing to do is implement ``get_blocks(create == true)`` +functionality in the ``->iomap_begin``/``->iomap_end`` methods. +It is strongly recommended to create separate mapping functions and +iomap ops for write operations. +Then convert the direct I/O write path to iomap, and start running fsx +w/ DIO enabled in earnest on filesystem. +This will flush out lots of data integrity corner case bugs that the new +write mapping implementation introduces. + +Now, convert any remaining file operations to call the iomap functions. +This will get the entire filesystem using the new mapping functions, and +they should largely be debugged and working correctly after this step. + +Most likely at this point, the buffered read and write paths will still +need to be converted. +The mapping functions should all work correctly, so all that needs to be +done is rewriting all the code that interfaces with bufferheads to +interface with iomap and folios. +It is much easier first to get regular file I/O (without any fancy +features like fscrypt, fsverity, compression, or data=journaling) +converted to use iomap. +Some of those fancy features (fscrypt and compression) aren't +implemented yet in iomap. +For unjournalled filesystems that use the pagecache for symbolic links +and directories, you might also try converting their handling to iomap. + +The rest is left as an exercise for the reader, as it will be different +for every filesystem. +If you encounter problems, email the people and lists in +``get_maintainers.pl`` for help. diff --git a/Documentation/filesystems/mount_api.rst b/Documentation/filesystems/mount_api.rst index 9aaf6ef75eb5..317934c9e8fc 100644 --- a/Documentation/filesystems/mount_api.rst +++ b/Documentation/filesystems/mount_api.rst @@ -645,6 +645,8 @@ The members are as follows: fs_param_is_blockdev Blockdev path * Needs lookup fs_param_is_path Path * Needs lookup fs_param_is_fd File descriptor result->int_32 + fs_param_is_uid User ID (u32) result->uid + fs_param_is_gid Group ID (u32) result->gid ======================= ======================= ===================== Note that if the value is of fs_param_is_bool type, fs_parse() will try @@ -678,6 +680,8 @@ The members are as follows: fsparam_bdev() fs_param_is_blockdev fsparam_path() fs_param_is_path fsparam_fd() fs_param_is_fd + fsparam_uid() fs_param_is_uid + fsparam_gid() fs_param_is_gid ======================= =============================================== all of which take two arguments, name string and option number - for @@ -784,8 +788,9 @@ process the parameters it is given. option number (which it returns). If successful, and if the parameter type indicates the result is a - boolean, integer or enum type, the value is converted by this function and - the result stored in result->{boolean,int_32,uint_32,uint_64}. + boolean, integer, enum, uid, or gid type, the value is converted by this + function and the result stored in + result->{boolean,int_32,uint_32,uint_64,uid,gid}. If a match isn't initially made, the key is prefixed with "no" and no value is present then an attempt will be made to look up the key with the diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst index 82d142de3461..e834779d9611 100644 --- a/Documentation/filesystems/proc.rst +++ b/Documentation/filesystems/proc.rst @@ -443,6 +443,15 @@ is not associated with a file: or if empty, the mapping is anonymous. +Starting with 6.11 kernel, /proc/PID/maps provides an alternative +ioctl()-based API that gives ability to flexibly and efficiently query and +filter individual VMAs. This interface is binary and is meant for more +efficient and easy programmatic use. `struct procmap_query`, defined in +linux/fs.h UAPI header, serves as an input/output argument to the +`PROCMAP_QUERY` ioctl() command. See comments in linus/fs.h UAPI header for +details on query semantics, supported flags, data returned, and general API +usage information. + The /proc/PID/smaps is an extension based on maps, showing the memory consumption for each of the process's mappings. For each mapping (aka Virtual Memory Area, or VMA) there is a series of lines such as the following:: diff --git a/Documentation/gpu/amdgpu/apu-asic-info-table.csv b/Documentation/gpu/amdgpu/apu-asic-info-table.csv index 18868abe2a91..5dd4b8762d19 100644 --- a/Documentation/gpu/amdgpu/apu-asic-info-table.csv +++ b/Documentation/gpu/amdgpu/apu-asic-info-table.csv @@ -7,7 +7,9 @@ SteamDeck, VANGOGH, DCN 3.0.1, 10.3.1, VCN 3.1.0, 5.2.1, 11.5.0 Ryzen 5000 series / Ryzen 7x30 series, GREEN SARDINE / Cezanne / Barcelo / Barcelo-R, DCN 2.1, 9.3, VCN 2.2, 4.1.1, 12.0.1 Ryzen 6000 series / Ryzen 7x35 series / Ryzen 7x36 series, YELLOW CARP / Rembrandt / Rembrandt-R, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3, 13.0.3 Ryzen 7000 series (AM5), Raphael, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5 +Ryzen 9000 series (AM5), Granite Ridge, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5 Ryzen 7x45 series (FL1), Dragon Range, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5 Ryzen 7x20 series, Mendocino, 3.1.6, 10.3.7, 3.1.1, 5.2.7, 13.0.8 Ryzen 7x40 series, Phoenix, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11 Ryzen 8x40 series, Hawk Point, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11 +Ryzen AI 300 series, Strix Point, 3.5.0, 11.5.0, 4.0.5, 6.1.0, 14.0.0 diff --git a/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv b/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv index 3825f00ca9fe..d2f10ee69dfc 100644 --- a/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv +++ b/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv @@ -15,8 +15,8 @@ Radeon (RX/Pro) 500 /540(X) /550 /640 /WX2100 /WX3100 /WX200 Series, POLARIS12, Radeon (RX|TM) (PRO|WX) Vega /MI25 /V320 /V340L /8200 /9100 /SSG MxGPU, VEGA10, DCE 12, 9.0.1, VCE 4.0.0 / UVD 7.0.0, 4.0.0 AMD Radeon (Pro) VII /MI50 /MI60, VEGA20, DCE 12, 9.4.0, VCE 4.1.0 / UVD 7.2.0, 4.2.0 MI100, ARCTURUS, *, 9.4.1, VCN 2.5.0, 4.2.2 -MI200, ALDEBARAN, *, 9.4.2, VCN 2.6.0, 4.4.0 -MI300, AQUA_VANGARAM, *, 9.4.3, VCN 4.0.3, 4.4.2 +MI200 Series, ALDEBARAN, *, 9.4.2, VCN 2.6.0, 4.4.0 +MI300 Series, AQUA_VANJARAM, *, 9.4.3, VCN 4.0.3, 4.4.2 AMD Radeon (RX|Pro) 5600(M|XT) /5700 (M|XT|XTB) /W5700, NAVI10, DCN 2.0.0, 10.1.10, VCN 2.0.0, 5.0.0 AMD Radeon (Pro) 5300 /5500XTB/5500(XT|M) /W5500M /W5500, NAVI14, DCN 2.0.0, 10.1.1, VCN 2.0.2, 5.0.2 AMD Radeon RX 6800(XT) /6900(XT) /W6800, SIENNA_CICHLID, DCN 3.0.0, 10.3.0, VCN 3.0.0, 5.2.0 diff --git a/Documentation/gpu/amdgpu/display/dcn-blocks.rst b/Documentation/gpu/amdgpu/display/dcn-blocks.rst index a3fbd3ea028b..5e34366f6dbe 100644 --- a/Documentation/gpu/amdgpu/display/dcn-blocks.rst +++ b/Documentation/gpu/amdgpu/display/dcn-blocks.rst @@ -8,37 +8,22 @@ and the code documentation when it is automatically generated. DCHUBBUB -------- -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h :doc: overview -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h - :export: - -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h - :internal: - HUBP ---- .. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h :doc: overview -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h - :export: - -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h - :internal: - DPP --- -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/dpp.h :doc: overview -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h - :export: - -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/dpp.h :internal: MPC @@ -48,10 +33,8 @@ MPC :doc: overview .. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h - :export: - -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h :internal: + :no-identifiers: mpcc_blnd_cfg mpcc_alpha_blend_mode OPP --- @@ -60,19 +43,13 @@ OPP :doc: overview .. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/opp.h - :export: - -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/opp.h :internal: DIO --- -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.c :doc: overview -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h - :export: - -.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h +.. kernel-doc:: drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.c :internal: diff --git a/Documentation/gpu/amdgpu/display/display-manager.rst b/Documentation/gpu/amdgpu/display/display-manager.rst index 67a811e6891f..b269ff3f7a54 100644 --- a/Documentation/gpu/amdgpu/display/display-manager.rst +++ b/Documentation/gpu/amdgpu/display/display-manager.rst @@ -132,7 +132,7 @@ The DRM blend mode and its elements are then mapped by AMDGPU display manager (MPC), as follows: .. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h - :functions: mpcc_blnd_cfg + :identifiers: mpcc_blnd_cfg Therefore, the blending configuration for a single MPCC instance on the MPC tree is defined by :c:type:`mpcc_blnd_cfg`, where @@ -144,7 +144,7 @@ alpha and plane alpha values. It sets one of the three modes for :c:type:`MPCC_ALPHA_BLND_MODE`, as described below. .. kernel-doc:: drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h - :functions: mpcc_alpha_blend_mode + :identifiers: mpcc_alpha_blend_mode DM then maps the elements of `enum mpcc_alpha_blend_mode` to those in the DRM blend formula, as follows: diff --git a/Documentation/gpu/amdgpu/thermal.rst b/Documentation/gpu/amdgpu/thermal.rst index 2f6166f81e6a..6d942b5c58f0 100644 --- a/Documentation/gpu/amdgpu/thermal.rst +++ b/Documentation/gpu/amdgpu/thermal.rst @@ -49,6 +49,12 @@ pp_power_profile_mode .. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c :doc: pp_power_profile_mode +pm_policy +--------------------- + +.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c + :doc: pm_policy + \*_busy_percent --------------- diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 335de7fcddee..11d9a5730fb2 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -57,8 +57,8 @@ is larger than the driver minor, the DRM_IOCTL_SET_VERSION call will return an error. Otherwise the driver's set_version() method will be called with the requested version. -Name, Description and Date -~~~~~~~~~~~~~~~~~~~~~~~~~~ +Name and Description +~~~~~~~~~~~~~~~~~~~~ char \*name; char \*desc; char \*date; The driver name is printed to the kernel log at initialization time, @@ -69,12 +69,6 @@ The driver description is a purely informative string passed to userspace through the DRM_IOCTL_VERSION ioctl and otherwise unused by the kernel. -The driver date, formatted as YYYYMMDD, is meant to identify the date of -the latest modification to the driver. However, as most drivers fail to -update it, its value is mostly useless. The DRM core prints it to the -kernel log at initialization time and passes it to userspace through the -DRM_IOCTL_VERSION ioctl. - Module Initialization --------------------- diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 59cfe8a7a8ba..8435e8621cc0 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -110,15 +110,21 @@ fbdev Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_fb_helper.c :doc: fbdev helpers +.. kernel-doc:: drivers/gpu/drm/drm_fbdev_dma.c + :export: + +.. kernel-doc:: drivers/gpu/drm/drm_fbdev_shmem.c + :export: + +.. kernel-doc:: drivers/gpu/drm/drm_fbdev_ttm.c + :export: + .. kernel-doc:: include/drm/drm_fb_helper.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_fb_helper.c :export: -.. kernel-doc:: drivers/gpu/drm/drm_fbdev_generic.c - :export: - format Helper Functions Reference ================================= diff --git a/Documentation/gpu/drm-usage-stats.rst b/Documentation/gpu/drm-usage-stats.rst index 6dc299343b48..a80f95ca1b2f 100644 --- a/Documentation/gpu/drm-usage-stats.rst +++ b/Documentation/gpu/drm-usage-stats.rst @@ -112,6 +112,19 @@ larger value within a reasonable period. Upon observing a value lower than what was previously read, userspace is expected to stay with that larger previous value until a monotonic update is seen. +- drm-total-cycles-<keystr>: <uint> + +Engine identifier string must be the same as the one specified in the +drm-cycles-<keystr> tag and shall contain the total number cycles for the given +engine. + +This is a timestamp in GPU unspecified unit that matches the update rate +of drm-cycles-<keystr>. For drivers that implement this interface, the engine +utilization can be calculated entirely on the GPU clock domain, without +considering the CPU sleep time between 2 samples. + +A driver may implement either this key or drm-maxfreq-<keystr>, but not both. + - drm-maxfreq-<keystr>: <uint> [Hz|MHz|KHz] Engine identifier string must be the same as the one specified in the @@ -121,6 +134,9 @@ percentage utilization of the engine, whereas drm-engine-<keystr> only reflects time active without considering what frequency the engine is operating as a percentage of its maximum frequency. +A driver may implement either this key or drm-total-cycles-<keystr>, but not +both. + Memory ^^^^^^ @@ -168,5 +184,6 @@ be documented above and where possible, aligned with other drivers. Driver specific implementations ------------------------------- -:ref:`i915-usage-stats` -:ref:`panfrost-usage-stats` +* :ref:`i915-usage-stats` +* :ref:`panfrost-usage-stats` +* :ref:`xe-usage-stats` diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 17261ba18313..ad59ae579237 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -150,7 +150,7 @@ High Definition Audio .. kernel-doc:: drivers/gpu/drm/i915/display/intel_audio.c :internal: -.. kernel-doc:: include/drm/i915_component.h +.. kernel-doc:: include/drm/intel/i915_component.h :internal: Intel HDMI LPE Audio Support @@ -210,9 +210,6 @@ DMC wakelock support .. kernel-doc:: drivers/gpu/drm/i915/display/intel_dmc_wl.c :doc: DMC wakelock support -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dmc_wl.c - :internal: - Video BIOS Table (VBT) ---------------------- diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv index 0f9590834829..bfbfbf4f102d 100644 --- a/Documentation/gpu/kms-properties.csv +++ b/Documentation/gpu/kms-properties.csv @@ -17,7 +17,6 @@ Owner Module/Drivers,Group,Property Name,Type,Property Values,Object attached,De ,Virtual GPU,“suggested X”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an X offset for a connector ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an Y offset for a connector ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" }",Connector,TDB -i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normally in the range 0..1.0 are remapped to the range 16/255..235/255." ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD ,,"""left_margin""",RANGE,"Min=0, Max= SDVO dependent",Connector,TBD @@ -38,7 +37,6 @@ i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:2 ,,“dot_crawl”,RANGE,"Min=0, Max=1",Connector,TBD ,SDVO-TV/LVDS,“brightness”,RANGE,"Min=0, Max= SDVO dependent",Connector,TBD CDV gma-500,Generic,"""Broadcast RGB""",ENUM,"{ “Full”, “Limited 16:235” }",Connector,TBD -,,"""Broadcast RGB""",ENUM,"{ “off”, “auto”, “on” }",Connector,TBD Poulsbo,Generic,“backlight”,RANGE,"Min=0, Max=100",Connector,TBD ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD ,,"""left_margin""",RANGE,"Min=0, Max= SDVO dependent",Connector,TBD diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index fb9ad120b141..2ea6ffc9b22b 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -243,19 +243,6 @@ Contact: Maintainer of the driver you plan to convert Level: Intermediate -Convert drivers to use drm_fbdev_generic_setup() ------------------------------------------------- - -Most drivers can use drm_fbdev_generic_setup(). Driver have to implement -atomic modesetting and GEM vmap support. Historically, generic fbdev emulation -expected the framebuffer in system memory or system-like memory. By employing -struct iosys_map, drivers with frambuffers in I/O memory can be supported -as well. - -Contact: Maintainer of the driver you plan to convert - -Level: Intermediate - Reimplement functions in drm_fbdev_fb_ops without fbdev ------------------------------------------------------- @@ -482,30 +469,53 @@ Contact: Thomas Zimmermann <tzimmermann@suse.de> Level: Starter -Clean up checks for already prepared/enabled in panels ------------------------------------------------------- +Remove disable/unprepare in remove/shutdown in panel-simple and panel-edp +------------------------------------------------------------------------- + +As of commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in +drm_panel"), we have a check in the drm_panel core to make sure nobody +double-calls prepare/enable/disable/unprepare. Eventually that should probably +be turned into a WARN_ON() or somehow made louder, but right now we actually +expect it to trigger and so we don't want it to be too loud. + +Specifically, that warning will trigger for panel-edp and panel-simple at +shutdown time because those panels hardcode a call to drm_panel_disable() +and drm_panel_unprepare() at shutdown and remove time that they call regardless +of panel state. On systems with a properly coded DRM modeset driver that +calls drm_atomic_helper_shutdown() this is pretty much guaranteed to cause +the warning to fire. + +Unfortunately we can't safely remove the calls in panel-edp and panel-simple +until we're sure that all DRM modeset drivers that are used with those panels +properly call drm_atomic_helper_shutdown(). This TODO item is to validate +that all DRM modeset drivers used with panel-edp and panel-simple properly +call drm_atomic_helper_shutdown() and then remove the calls to +disable/unprepare from those panels. Alternatively, this TODO item could be +removed by convincing stakeholders that those calls are fine and downgrading +the error message in drm_panel_disable() / drm_panel_unprepare() to a +debug-level message. -In a whole pile of panel drivers, we have code to make the -prepare/unprepare/enable/disable callbacks behave as no-ops if they've already -been called. To get some idea of the duplicated code, try:: +Contact: Douglas Anderson <dianders@chromium.org> - git grep 'if.*>prepared' -- drivers/gpu/drm/panel - git grep 'if.*>enabled' -- drivers/gpu/drm/panel +Level: Intermediate -In the patch ("drm/panel: Check for already prepared/enabled in drm_panel") -we've moved this check to the core. Now we can most definitely remove the -check from the individual panels and save a pile of code. +Transition away from using mipi_dsi_*_write_seq() +------------------------------------------------- -In adition to removing the check from the individual panels, it is believed -that even the core shouldn't need this check and that should be considered -an error if other code ever relies on this check. The check in the core -currently prints a warning whenever something is relying on this check with -dev_warn(). After a little while, we likely want to promote this to a -WARN(1) to help encourage folks not to rely on this behavior. +The macros mipi_dsi_generic_write_seq() and mipi_dsi_dcs_write_seq() are +non-intuitive because, if there are errors, they return out of the *caller's* +function. We should move all callers to use mipi_dsi_generic_write_seq_multi() +and mipi_dsi_dcs_write_seq_multi() macros instead. + +Once all callers are transitioned, the macros and the functions that they call, +mipi_dsi_generic_write_chatty() and mipi_dsi_dcs_write_buffer_chatty(), can +probably be removed. Alternatively, if people feel like the _multi() variants +are overkill for some use cases, we could keep the mipi_dsi_*_write_seq() +variants but change them not to return out of the caller. Contact: Douglas Anderson <dianders@chromium.org> -Level: Starter/Intermediate +Level: Starter Core refactorings diff --git a/Documentation/gpu/xe/index.rst b/Documentation/gpu/xe/index.rst index c224ecaee81e..3f07aa3b5432 100644 --- a/Documentation/gpu/xe/index.rst +++ b/Documentation/gpu/xe/index.rst @@ -23,3 +23,4 @@ DG2, etc is provided to prototype the driver. xe_firmware xe_tile xe_debugging + xe-drm-usage-stats.rst diff --git a/Documentation/gpu/xe/xe-drm-usage-stats.rst b/Documentation/gpu/xe/xe-drm-usage-stats.rst new file mode 100644 index 000000000000..482d503ae68a --- /dev/null +++ b/Documentation/gpu/xe/xe-drm-usage-stats.rst @@ -0,0 +1,10 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +.. _xe-usage-stats: + +======================================== +Xe DRM client usage stats implementation +======================================== + +.. kernel-doc:: drivers/gpu/drm/xe/xe_drm_client.c + :doc: DRM Client usage stats diff --git a/Documentation/hid/hid-bpf.rst b/Documentation/hid/hid-bpf.rst index 0765b3298ecf..5939eeafb361 100644 --- a/Documentation/hid/hid-bpf.rst +++ b/Documentation/hid/hid-bpf.rst @@ -129,19 +129,37 @@ When a BPF program needs to emit input events, it needs to talk with the HID protocol, and rely on the HID kernel processing to translate the HID data into input events. +In-tree HID-BPF programs and ``udev-hid-bpf`` +============================================= + +Official device fixes are shipped in the kernel tree as source in the +``drivers/hid/bpf/progs`` directory. This allows to add selftests to them in +``tools/testing/selftests/hid``. + +However, the compilation of these objects is not part of a regular kernel compilation +given that they need an external tool to be loaded. This tool is currently +`udev-hid-bpf <https://libevdev.pages.freedesktop.org/udev-hid-bpf/index.html>`_. + +For convenience, that external repository duplicates the files from here in +``drivers/hid/bpf/progs`` into its own ``src/bpf/stable`` directory. This allows +distributions to not have to pull the entire kernel source tree to ship and package +those HID-BPF fixes. ``udev-hid-bpf`` also has capabilities of handling multiple +objects files depending on the kernel the user is running. + Available types of programs =========================== -HID-BPF is built "on top" of BPF, meaning that we use tracing method to +HID-BPF is built "on top" of BPF, meaning that we use bpf struct_ops method to declare our programs. HID-BPF has the following attachment types available: -1. event processing/filtering with ``SEC("fmod_ret/hid_bpf_device_event")`` in libbpf +1. event processing/filtering with ``SEC("struct_ops/hid_device_event")`` in libbpf 2. actions coming from userspace with ``SEC("syscall")`` in libbpf -3. change of the report descriptor with ``SEC("fmod_ret/hid_bpf_rdesc_fixup")`` in libbpf +3. change of the report descriptor with ``SEC("struct_ops/hid_rdesc_fixup")`` or + ``SEC("struct_ops.s/hid_rdesc_fixup")`` in libbpf -A ``hid_bpf_device_event`` is calling a BPF program when an event is received from +A ``hid_device_event`` is calling a BPF program when an event is received from the device. Thus we are in IRQ context and can act on the data or notify userspace. And given that we are in IRQ context, we can not talk back to the device. @@ -149,37 +167,42 @@ A ``syscall`` means that userspace called the syscall ``BPF_PROG_RUN`` facility. This time, we can do any operations allowed by HID-BPF, and talking to the device is allowed. -Last, ``hid_bpf_rdesc_fixup`` is different from the others as there can be only one +Last, ``hid_rdesc_fixup`` is different from the others as there can be only one BPF program of this type. This is called on ``probe`` from the driver and allows to -change the report descriptor from the BPF program. Once a ``hid_bpf_rdesc_fixup`` +change the report descriptor from the BPF program. Once a ``hid_rdesc_fixup`` program has been loaded, it is not possible to overwrite it unless the program which inserted it allows us by pinning the program and closing all of its fds pointing to it. +Note that ``hid_rdesc_fixup`` can be declared as sleepable (``SEC("struct_ops.s/hid_rdesc_fixup")``). + + Developer API: ============== -User API data structures available in programs: ------------------------------------------------ +Available ``struct_ops`` for HID-BPF: +------------------------------------- .. kernel-doc:: include/linux/hid_bpf.h + :identifiers: hid_bpf_ops -Available tracing functions to attach a HID-BPF program: --------------------------------------------------------- -.. kernel-doc:: drivers/hid/bpf/hid_bpf_dispatch.c - :functions: hid_bpf_device_event hid_bpf_rdesc_fixup +User API data structures available in programs: +----------------------------------------------- -Available API that can be used in all HID-BPF programs: -------------------------------------------------------- +.. kernel-doc:: include/linux/hid_bpf.h + :identifiers: hid_bpf_ctx + +Available API that can be used in all HID-BPF struct_ops programs: +------------------------------------------------------------------ .. kernel-doc:: drivers/hid/bpf/hid_bpf_dispatch.c - :functions: hid_bpf_get_data + :identifiers: hid_bpf_get_data -Available API that can be used in syscall HID-BPF programs: ------------------------------------------------------------ +Available API that can be used in syscall HID-BPF programs or in sleepable HID-BPF struct_ops programs: +------------------------------------------------------------------------------------------------------- .. kernel-doc:: drivers/hid/bpf/hid_bpf_dispatch.c - :functions: hid_bpf_attach_prog hid_bpf_hw_request hid_bpf_hw_output_report hid_bpf_input_report hid_bpf_allocate_context hid_bpf_release_context + :identifiers: hid_bpf_hw_request hid_bpf_hw_output_report hid_bpf_input_report hid_bpf_try_input_report hid_bpf_allocate_context hid_bpf_release_context General overview of a HID-BPF program ===================================== @@ -222,20 +245,21 @@ This allows the following: Effect of a HID-BPF program --------------------------- -For all HID-BPF attachment types except for :c:func:`hid_bpf_rdesc_fixup`, several eBPF -programs can be attached to the same device. +For all HID-BPF attachment types except for :c:func:`hid_rdesc_fixup`, several eBPF +programs can be attached to the same device. If a HID-BPF struct_ops has a +:c:func:`hid_rdesc_fixup` while another is already attached to the device, the +kernel will return `-EINVAL` when attaching the struct_ops. -Unless ``HID_BPF_FLAG_INSERT_HEAD`` is added to the flags while attaching the -program, the new program is appended at the end of the list. -``HID_BPF_FLAG_INSERT_HEAD`` will insert the new program at the beginning of the -list which is useful for e.g. tracing where we need to get the unprocessed events -from the device. +Unless ``BPF_F_BEFORE`` is added to the flags while attaching the program, the new +program is appended at the end of the list. +``BPF_F_BEFORE`` will insert the new program at the beginning of the list which is +useful for e.g. tracing where we need to get the unprocessed events from the device. -Note that if there are multiple programs using the ``HID_BPF_FLAG_INSERT_HEAD`` flag, +Note that if there are multiple programs using the ``BPF_F_BEFORE`` flag, only the most recently loaded one is actually the first in the list. -``SEC("fmod_ret/hid_bpf_device_event")`` -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +``SEC("struct_ops/hid_device_event")`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Whenever a matching event is raised, the eBPF programs are called one after the other and are working on the same data buffer. @@ -258,17 +282,17 @@ with, userspace needs to refer to the device by its unique system id (the last 4 in the sysfs path: ``/sys/bus/hid/devices/xxxx:yyyy:zzzz:0000``). To retrieve a context associated with the device, the program must call -:c:func:`hid_bpf_allocate_context` and must release it with :c:func:`hid_bpf_release_context` +hid_bpf_allocate_context() and must release it with hid_bpf_release_context() before returning. Once the context is retrieved, one can also request a pointer to kernel memory with -:c:func:`hid_bpf_get_data`. This memory is big enough to support all input/output/feature +hid_bpf_get_data(). This memory is big enough to support all input/output/feature reports of the given device. -``SEC("fmod_ret/hid_bpf_rdesc_fixup")`` -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +``SEC("struct_ops/hid_rdesc_fixup")`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The ``hid_bpf_rdesc_fixup`` program works in a similar manner to -``.report_fixup`` of ``struct hid_driver``. +The ``hid_rdesc_fixup`` program works in a similar manner to ``.report_fixup`` +of ``struct hid_driver``. When the device is probed, the kernel sets the data buffer of the context with the content of the report descriptor. The memory associated with that buffer is @@ -277,33 +301,31 @@ content of the report descriptor. The memory associated with that buffer is The eBPF program can modify the data buffer at-will and the kernel uses the modified content and size as the report descriptor. -Whenever a ``SEC("fmod_ret/hid_bpf_rdesc_fixup")`` program is attached (if no -program was attached before), the kernel immediately disconnects the HID device -and does a reprobe. +Whenever a struct_ops containing a ``SEC("struct_ops/hid_rdesc_fixup")`` program +is attached (if no program was attached before), the kernel immediately disconnects +the HID device and does a reprobe. -In the same way, when the ``SEC("fmod_ret/hid_bpf_rdesc_fixup")`` program is -detached, the kernel issues a disconnect on the device. +In the same way, when this struct_ops is detached, the kernel issues a disconnect +on the device. There is no ``detach`` facility in HID-BPF. Detaching a program happens when -all the user space file descriptors pointing at a program are closed. +all the user space file descriptors pointing at a HID-BPF struct_ops link are closed. Thus, if we need to replace a report descriptor fixup, some cooperation is required from the owner of the original report descriptor fixup. -The previous owner will likely pin the program in the bpffs, and we can then +The previous owner will likely pin the struct_ops link in the bpffs, and we can then replace it through normal bpf operations. Attaching a bpf program to a device =================================== -``libbpf`` does not export any helper to attach a HID-BPF program. -Users need to use a dedicated ``syscall`` program which will call -``hid_bpf_attach_prog(hid_id, program_fd, flags)``. +We now use standard struct_ops attachment through ``bpf_map__attach_struct_ops()``. +But given that we need to attach a struct_ops to a dedicated HID device, the caller +must set ``hid_id`` in the struct_ops map before loading the program in the kernel. ``hid_id`` is the unique system ID of the HID device (the last 4 numbers in the sysfs path: ``/sys/bus/hid/devices/xxxx:yyyy:zzzz:0000``) -``progam_fd`` is the opened file descriptor of the program to attach. - -``flags`` is of type ``enum hid_bpf_attach_flags``. +One can also set ``flags``, which is of type ``enum hid_bpf_attach_flags``. We can not rely on hidraw to bind a BPF program to a HID device. hidraw is an artefact of the processing of the HID device, and is not stable. Some drivers @@ -358,32 +380,15 @@ For that, we can create a basic skeleton for our BPF program:: extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, unsigned int offset, const size_t __sz) __ksym; - extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; struct { __uint(type, BPF_MAP_TYPE_RINGBUF); __uint(max_entries, 4096 * 64); } ringbuf SEC(".maps"); - struct attach_prog_args { - int prog_fd; - unsigned int hid; - unsigned int flags; - int retval; - }; - - SEC("syscall") - int attach_prog(struct attach_prog_args *ctx) - { - ctx->retval = hid_bpf_attach_prog(ctx->hid, - ctx->prog_fd, - ctx->flags); - return 0; - } - __u8 current_value = 0; - SEC("?fmod_ret/hid_bpf_device_event") + SEC("struct_ops/hid_device_event") int BPF_PROG(filter_switch, struct hid_bpf_ctx *hid_ctx) { __u8 *data = hid_bpf_get_data(hid_ctx, 0 /* offset */, 192 /* size */); @@ -407,37 +412,37 @@ For that, we can create a basic skeleton for our BPF program:: return 0; } -To attach ``filter_switch``, userspace needs to call the ``attach_prog`` syscall -program first:: + SEC(".struct_ops.link") + struct hid_bpf_ops haptic_tablet = { + .hid_device_event = (void *)filter_switch, + }; + + +To attach ``haptic_tablet``, userspace needs to set ``hid_id`` first:: static int attach_filter(struct hid *hid_skel, int hid_id) { - int err, prog_fd; - int ret = -1; - struct attach_prog_args args = { - .hid = hid_id, - }; - DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattrs, - .ctx_in = &args, - .ctx_size_in = sizeof(args), - ); + int err, link_fd; - args.prog_fd = bpf_program__fd(hid_skel->progs.filter_switch); + hid_skel->struct_ops.haptic_tablet->hid_id = hid_id; + err = hid__load(skel); + if (err) + return err; - prog_fd = bpf_program__fd(hid_skel->progs.attach_prog); - - err = bpf_prog_test_run_opts(prog_fd, &tattrs); - if (err) - return err; + link_fd = bpf_map__attach_struct_ops(hid_skel->maps.haptic_tablet); + if (!link_fd) { + fprintf(stderr, "can not attach HID-BPF program: %m\n"); + return -1; + } - return args.retval; /* the fd of the created bpf_link */ + return link_fd; /* the fd of the created bpf_link */ } Our userspace program can now listen to notifications on the ring buffer, and is awaken only when the value changes. When the userspace program doesn't need to listen to events anymore, it can just -close the returned fd from :c:func:`attach_filter`, which will tell the kernel to +close the returned bpf link from :c:func:`attach_filter`, which will tell the kernel to detach the program from the HID device. Of course, in other use cases, the userspace program can also pin the fd to the diff --git a/Documentation/hwmon/adm1021.rst b/Documentation/hwmon/adm1021.rst deleted file mode 100644 index 116fb2019956..000000000000 --- a/Documentation/hwmon/adm1021.rst +++ /dev/null @@ -1,153 +0,0 @@ -Kernel driver adm1021 -===================== - -Supported chips: - - * Analog Devices ADM1021 - - Prefix: 'adm1021' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Analog Devices website - - * Analog Devices ADM1021A/ADM1023 - - Prefix: 'adm1023' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Analog Devices website - - * Genesys Logic GL523SM - - Prefix: 'gl523sm' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: - - * Maxim MAX1617 - - Prefix: 'max1617' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Maxim website - - * Maxim MAX1617A - - Prefix: 'max1617a' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Maxim website - - * National Semiconductor LM84 - - Prefix: 'lm84' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the National Semiconductor website - - * Philips NE1617 - - Prefix: 'max1617' (probably detected as a max1617) - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Philips website - - * Philips NE1617A - - Prefix: 'max1617' (probably detected as a max1617) - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Philips website - - * TI THMC10 - - Prefix: 'thmc10' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the TI website - - * Onsemi MC1066 - - Prefix: 'mc1066' - - Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - - Datasheet: Publicly available at the Onsemi website - - -Authors: - - Frodo Looijaard <frodol@dds.nl>, - - Philip Edelbrock <phil@netroedge.com> - -Module Parameters ------------------ - -* read_only: int - Don't set any values, read only mode - - -Description ------------ - -The chips supported by this driver are very similar. The Maxim MAX1617 is -the oldest; it has the problem that it is not very well detectable. The -MAX1617A solves that. The ADM1021 is a straight clone of the MAX1617A. -Ditto for the THMC10. From here on, we will refer to all these chips as -ADM1021-clones. - -The ADM1021 and MAX1617A reports a die code, which is a sort of revision -code. This can help us pinpoint problems; it is not very useful -otherwise. - -ADM1021-clones implement two temperature sensors. One of them is internal, -and measures the temperature of the chip itself; the other is external and -is realised in the form of a transistor-like device. A special alarm -indicates whether the remote sensor is connected. - -Each sensor has its own low and high limits. When they are crossed, the -corresponding alarm is set and remains on as long as the temperature stays -out of range. Temperatures are measured in degrees Celsius. Measurements -are possible between -65 and +127 degrees, with a resolution of one degree. - -If an alarm triggers, it will remain triggered until the hardware register -is read at least once. This means that the cause for the alarm may already -have disappeared! - -This driver only updates its values each 1.5 seconds; reading it more often -will do no harm, but will return 'old' values. It is possible to make -ADM1021-clones do faster measurements, but there is really no good reason -for that. - - -Netburst-based Xeon support ---------------------------- - -Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to -2003) microarchitecture had real MAX1617, ADM1021, or compatible chips -within them, with two temperature sensors. Other Xeon processors of this -era (with 400 MHz FSB) had chips with only one temperature sensor. - -If you have such an old Xeon, and you get two valid temperatures when -loading the adm1021 module, then things are good. - -If nothing happens when loading the adm1021 module, and you are certain -that your specific Xeon processor model includes compatible sensors, you -will have to explicitly instantiate the sensor chips from user-space. See -method 4 in Documentation/i2c/instantiating-devices.rst. Possible slave -addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that -only temp2 will be correct and temp1 will have to be ignored. - -Previous generations of the Xeon processor (based on Pentium II/III) -didn't have these sensors. Next generations of Xeon processors (533 MHz -FSB and faster) lost them, until the Core-based generation which -introduced integrated digital thermal sensors. These are supported by -the coretemp driver. diff --git a/Documentation/hwmon/amc6821.rst b/Documentation/hwmon/amc6821.rst index 5ddb2849da90..dbd544cd1160 100644 --- a/Documentation/hwmon/amc6821.rst +++ b/Documentation/hwmon/amc6821.rst @@ -47,13 +47,18 @@ fan1_input ro tachometer speed fan1_min rw " fan1_max rw " fan1_fault ro " -fan1_div rw Fan divisor can be either 2 or 4. +fan1_pulses rw Pulses per revolution can be either 2 or 4. +fan1_target rw Target fan speed, to be used with pwm1_enable + mode 4. pwm1 rw pwm1 pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled by remote temperature, 3=fan controlled by combination of the on-chip temperature and remote-sensor temperature, + 4=fan controlled by target rpm set with + fan1_target attribute. +pwm1_mode rw Fan duty control mode (0=DC, 1=PWM) pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3 pwm1_auto_point1_pwm ro Hardwired to 0, shared for both temperature channels. diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst index 0bf99ba406dd..ca38922f4ec5 100644 --- a/Documentation/hwmon/asus_ec_sensors.rst +++ b/Documentation/hwmon/asus_ec_sensors.rst @@ -8,6 +8,7 @@ Supported boards: * PRIME X570-PRO * Pro WS X570-ACE * ProArt X570-CREATOR WIFI + * ProArt X670E-CREATOR WIFI * ProArt B550-CREATOR * ROG CROSSHAIR VIII DARK HERO * ROG CROSSHAIR VIII HERO (WI-FI) diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst index 751f95476b57..15077203a2f8 100644 --- a/Documentation/hwmon/corsair-cpro.rst +++ b/Documentation/hwmon/corsair-cpro.rst @@ -39,3 +39,11 @@ fan[1-6]_target Sets fan speed target rpm. pwm[1-6] Sets the fan speed. Values from 0-255. Can only be read if pwm was set directly. ======================= ===================================================================== + +Debugfs entries +--------------- + +======================= =================== +firmware_version Firmware version +bootloader_version Bootloader version +======================= =================== diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst index 16db34d464dd..7ed794087f84 100644 --- a/Documentation/hwmon/corsair-psu.rst +++ b/Documentation/hwmon/corsair-psu.rst @@ -15,11 +15,11 @@ Supported devices: Corsair HX850i - Corsair HX1000i (Series 2022 and 2023) + Corsair HX1000i (Legacy and Series 2023) - Corsair HX1200i + Corsair HX1200i (Legacy and Series 2023) - Corsair HX1500i (Series 2022 and 2023) + Corsair HX1500i (Legacy and Series 2023) Corsair RM550i diff --git a/Documentation/hwmon/cros_ec_hwmon.rst b/Documentation/hwmon/cros_ec_hwmon.rst new file mode 100644 index 000000000000..47ecae983bdb --- /dev/null +++ b/Documentation/hwmon/cros_ec_hwmon.rst @@ -0,0 +1,26 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver cros_ec_hwmon +=========================== + +Supported chips: + + * ChromeOS embedded controllers. + + Prefix: 'cros_ec' + + Addresses scanned: - + +Author: + + - Thomas Weißschuh <linux@weissschuh.net> + +Description +----------- + +This driver implements support for hardware monitoring commands exposed by the +ChromeOS embedded controller used in Chromebooks and other devices. + +The channel labels exposed via hwmon are retrieved from the EC itself. + +Fan and temperature readings are supported. diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst index 977263cb57a8..74905675d71f 100644 --- a/Documentation/hwmon/dell-smm-hwmon.rst +++ b/Documentation/hwmon/dell-smm-hwmon.rst @@ -360,6 +360,8 @@ Firmware Bug Affected Machines ======================================================= ================= Reading of fan states return spurious errors. Precision 490 + OptiPlex 7060 + Reading of fan types causes erratic fan behaviour. Studio XPS 8000 Studio XPS 8100 diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 03d313af469a..913c11390a45 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -25,7 +25,6 @@ Hardware Monitoring Kernel Drivers acpi_power_meter ad7314 adc128d818 - adm1021 adm1025 adm1026 adm1031 @@ -58,6 +57,7 @@ Hardware Monitoring Kernel Drivers coretemp corsair-cpro corsair-psu + cros_ec_hwmon da9052 da9055 dell-smm-hwmon @@ -154,7 +154,6 @@ Hardware Monitoring Kernel Drivers max34440 max6620 max6639 - max6642 max6650 max6697 max8688 @@ -165,9 +164,13 @@ Hardware Monitoring Kernel Drivers mlxreg-fan mp2856 mp2888 + mp2891 mp2975 + mp2993 mp5023 + mp5920 mp5990 + mp9941 mpq8785 nct6683 nct6775 @@ -215,6 +218,7 @@ Hardware Monitoring Kernel Drivers smsc47m192 smsc47m1 sparx5-temp + spd5118 stpddc60 surface_fan sy7636a-hwmon diff --git a/Documentation/hwmon/max31827.rst b/Documentation/hwmon/max31827.rst index 44ab9dc064cb..9c11a9518c67 100644 --- a/Documentation/hwmon/max31827.rst +++ b/Documentation/hwmon/max31827.rst @@ -131,7 +131,14 @@ The Fault Queue bits select how many consecutive temperature faults must occur before overtemperature or undertemperature faults are indicated in the corresponding status bits. -Notes ------ +PEC Support +----------- + +When reading a register value, the PEC byte is computed and sent by the chip. + +PEC on word data transaction respresents a signifcant increase in bandwitdh +usage (+33% for both write and reads) in normal conditions. -PEC is not implemented. +Since this operation implies there will be an extra delay to each +transaction, PEC can be disabled or enabled through sysfs. +Just write 1 to the "pec" file for enabling PEC and 0 for disabling it. diff --git a/Documentation/hwmon/max6642.rst b/Documentation/hwmon/max6642.rst deleted file mode 100644 index 7e5b7d4f9492..000000000000 --- a/Documentation/hwmon/max6642.rst +++ /dev/null @@ -1,27 +0,0 @@ -Kernel driver max6642 -===================== - -Supported chips: - - * Maxim MAX6642 - - Prefix: 'max6642' - - Addresses scanned: I2C 0x48-0x4f - - Datasheet: Publicly available at the Maxim website - - http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf - -Authors: - - Per Dalen <per.dalen@appeartv.com> - -Description ------------ - -The MAX6642 is a digital temperature sensor. It senses its own temperature as -well as the temperature on one external diode. - -All temperature values are given in degrees Celsius. Resolution -is 0.25 degree for the local temperature and for the remote temperature. diff --git a/Documentation/hwmon/mp2891.rst b/Documentation/hwmon/mp2891.rst new file mode 100644 index 000000000000..55944d1b5457 --- /dev/null +++ b/Documentation/hwmon/mp2891.rst @@ -0,0 +1,179 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2891 +==================== + +Supported chips: + + * MPS mp2891 + + Prefix: 'mp2891' + + * Datasheet + + Publicly available at the MPS website : https://www.monolithicpower.com/en/mp2891.html + +Author: + + Noah Wang <noahwang.wang@outlook.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2891 Multi-phase Digital VR Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct and linear format for reading input voltage, +output voltage, input current, output current, input power, output +power, and temperature. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in2_min** + +**in2_min_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +**in3_min** + +**in3_min_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +**curr2_input** + +**curr2_label** + +**curr2_max** + +**curr2_max_alarm** + +The driver provides the following attributes for output current: + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +**curr4_input** + +**curr4_label** + +**curr4_crit** + +**curr4_crit_alarm** + +**curr4_max** + +**curr4_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +**power1_max** + +**power1_alarm** + +**power2_input** + +**power2_label** + +**power2_max** + +**power2_alarm** + +The driver provides the following attributes for output power: + +**power3_input** + +**power3_label** + +**power4_input** + +**power4_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/Documentation/hwmon/mp2993.rst b/Documentation/hwmon/mp2993.rst new file mode 100644 index 000000000000..7a4fe0d946e0 --- /dev/null +++ b/Documentation/hwmon/mp2993.rst @@ -0,0 +1,150 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2993 +==================== + +Supported chips: + + * MPS mp2993 + + Prefix: 'mp2993' + + * Datasheet + https://scnbwymvp-my.sharepoint.com/:f:/g/personal/admin_scnbwy_com/Eth4kX1_J1hMsaASHiOYL4QBHU5a75r-tRfLKbHnJFdKLQ?e=vxj3DF + +Author: + + Noah Wang <noahwang.wang@outlook.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2993 Dual Loop Digital Multi-phase Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +**curr2_crit** + +**curr2_crit_alarm** + +**curr2_max** + +**curr2_max_alarm** + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +The driver provides the following attributes for output power: + +**power2_input** + +**power2_label** + +**power3_input** + +**power3_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/Documentation/hwmon/mp5920.rst b/Documentation/hwmon/mp5920.rst new file mode 100644 index 000000000000..98946e7cf54e --- /dev/null +++ b/Documentation/hwmon/mp5920.rst @@ -0,0 +1,91 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp5920 +==================== + +Supported chips: + + * MPS MP5920 + + Prefix: 'mp5920' + + * Datasheet + + Publicly available at the MPS website : https://www.monolithicpower.com/en/mp5920.html + +Authors: + + Tony Ao <tony_ao@wiwynn.com> + Alex Vdovydchenko <xzeol@yahoo.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP5920 Hot-Swap Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct and linear format for reading input voltage, +output voltage, output current, input power and temperature. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_rated_max** + +**in1_rated_min** + +**in1_crit** + +**in1_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_rated_max** + +**in2_rated_min** + +**in2_alarm** + +The driver provides the following attributes for output current: + +**curr1_input** + +**curr1_label** + +**curr1_crit** + +**curr1_alarm** + +**curr1_rated_max** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +**power1_max** + +**power1_rated_max** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_max** + +**temp1_crit** + +**temp1_alarm** diff --git a/Documentation/hwmon/mp9941.rst b/Documentation/hwmon/mp9941.rst new file mode 100644 index 000000000000..1274fa20e256 --- /dev/null +++ b/Documentation/hwmon/mp9941.rst @@ -0,0 +1,92 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp9941 +==================== + +Supported chips: + + * MPS mp9941 + + Prefix: 'mp9941' + + * Datasheet + https://scnbwymvp-my.sharepoint.com/:f:/g/personal/admin_scnbwy_com/Eth4kX1_J1hMsaASHiOYL4QBHU5a75r-tRfLKbHnJFdKLQ?e=vxj3DF + +Author: + + Noah Wang <noahwang.wang@outlook.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP9941 digital step-down converter. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in2_rated_max** + +**in2_rated_min** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +The driver provides the following attributes for output power: + +**power2_input** + +**power2_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** diff --git a/Documentation/hwmon/spd5118.rst b/Documentation/hwmon/spd5118.rst new file mode 100644 index 000000000000..ef7338f46575 --- /dev/null +++ b/Documentation/hwmon/spd5118.rst @@ -0,0 +1,63 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver spd5118 +===================== + +Supported chips: + + * SPD5118 (JEDEC JESD300) compliant temperature sensor chips + + JEDEC standard download: + https://www.jedec.org/standards-documents/docs/jesd300-5b01 + (account required) + + + Prefix: 'spd5118' + + Addresses scanned: I2C 0x50 - 0x57 + +Author: + Guenter Roeck <linux@roeck-us.net> + + +Description +----------- + +This driver implements support for SPD5118 (JEDEC JESD300) compliant temperature +sensors, which are used on many DDR5 memory modules. Some systems use the sensor +to prevent memory overheating by automatically throttling the memory controller. + +The driver auto-detects SPD5118 compliant chips, but can also be instantiated +using devicetree/firmware nodes. + +A SPD5118 compliant chip supports a single temperature sensor. Critical minimum, +minimum, maximum, and critical temperature can be configured. There are alarms +for low critical, low, high, and critical thresholds. + + +Hardware monitoring sysfs entries +--------------------------------- + +======================= ================================== +temp1_input Temperature (RO) +temp1_lcrit Low critical high temperature (RW) +temp1_min Minimum temperature (RW) +temp1_max Maximum temperature (RW) +temp1_crit Critical high temperature (RW) + +temp1_lcrit_alarm Temperature low critical alarm +temp1_min_alarm Temperature low alarm +temp1_max_alarm Temperature high alarm +temp1_crit_alarm Temperature critical alarm +======================= ================================== + +Alarm attributes are sticky until read and will be cleared afterwards +unless the alarm condition still applies. + + +SPD (Serial Presence Detect) support +------------------------------------ + +The driver also supports reading the SPD NVRAM on SPD5118 compatible chips. +SPD data is available from the 'eeprom' binary attribute file attached to the +chip's I2C device. diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst index 10eced6c2e46..c840b597912c 100644 --- a/Documentation/i2c/busses/i2c-i801.rst +++ b/Documentation/i2c/busses/i2c-i801.rst @@ -48,6 +48,7 @@ Supported adapters: * Intel Raptor Lake (PCH) * Intel Meteor Lake (SOC and PCH) * Intel Birch Stream (SOC) + * Intel Arrow Lake (SOC) Datasheets: Publicly available at the Intel website diff --git a/Documentation/i2c/slave-testunit-backend.rst b/Documentation/i2c/slave-testunit-backend.rst index ecfc2abec32d..37142a48ab35 100644 --- a/Documentation/i2c/slave-testunit-backend.rst +++ b/Documentation/i2c/slave-testunit-backend.rst @@ -16,9 +16,9 @@ Note that this is a device for testing and debugging. It should not be enabled in a production build. And while there is some versioning and we try hard to keep backward compatibility, there is no stable ABI guaranteed! -Instantiating the device is regular. Example for bus 0, address 0x30: +Instantiating the device is regular. Example for bus 0, address 0x30:: -# echo "slave-testunit 0x1030" > /sys/bus/i2c/devices/i2c-0/new_device + # echo "slave-testunit 0x1030" > /sys/bus/i2c/devices/i2c-0/new_device After that, you will have a write-only device listening. Reads will just return an 8-bit version number of the testunit. When writing, the device consists of 4 @@ -26,14 +26,17 @@ an 8-bit version number of the testunit. When writing, the device consists of 4 written to start a testcase, i.e. you usually write 4 bytes to the device. The registers are: -0x00 CMD - which test to trigger -0x01 DATAL - configuration byte 1 for the test -0x02 DATAH - configuration byte 2 for the test -0x03 DELAY - delay in n * 10ms until test is started +.. csv-table:: + :header: "Offset", "Name", "Description" -Using 'i2cset' from the i2c-tools package, the generic command looks like: + 0x00, CMD, which test to trigger + 0x01, DATAL, configuration byte 1 for the test + 0x02, DATAH, configuration byte 2 for the test + 0x03, DELAY, delay in n * 10ms until test is started -# i2cset -y <bus_num> <testunit_address> <CMD> <DATAL> <DATAH> <DELAY> i +Using 'i2cset' from the i2c-tools package, the generic command looks like:: + + # i2cset -y <bus_num> <testunit_address> <CMD> <DATAL> <DATAH> <DELAY> i DELAY is a generic parameter which will delay the execution of the test in CMD. While a command is running (including the delay), new commands will not be @@ -45,44 +48,88 @@ result in the transfer not being acknowledged. Commands -------- -0x00 NOOP (reserved for future use) +0x00 NOOP +~~~~~~~~~ + +Reserved for future use. + +0x01 READ_BYTES +~~~~~~~~~~~~~~~ + +.. list-table:: + :header-rows: 1 + + * - CMD + - DATAL + - DATAH + - DELAY + + * - 0x01 + - address to read data from (lower 7 bits, highest bit currently unused) + - number of bytes to read + - n * 10ms + +Also needs master mode. This is useful to test if your bus master driver is +handling multi-master correctly. You can trigger the testunit to read bytes +from another device on the bus. If the bus master under test also wants to +access the bus at the same time, the bus will be busy. Example to read 128 +bytes from device 0x50 after 50ms of delay:: + + # i2cset -y 0 0x30 0x01 0x50 0x80 0x05 i + +0x02 SMBUS_HOST_NOTIFY +~~~~~~~~~~~~~~~~~~~~~~ + +.. list-table:: + :header-rows: 1 + + * - CMD + - DATAL + - DATAH + - DELAY + + * - 0x02 + - low byte of the status word to send + - high byte of the status word to send + - n * 10ms + +Also needs master mode. This test will send an SMBUS_HOST_NOTIFY message to the +host. Note that the status word is currently ignored in the Linux Kernel. +Example to send a notification after 10ms:: -0x01 READ_BYTES (also needs master mode) - DATAL - address to read data from (lower 7 bits, highest bit currently unused) - DATAH - number of bytes to read + # i2cset -y 0 0x30 0x02 0x42 0x64 0x01 i -This is useful to test if your bus master driver is handling multi-master -correctly. You can trigger the testunit to read bytes from another device on -the bus. If the bus master under test also wants to access the bus at the same -time, the bus will be busy. Example to read 128 bytes from device 0x50 after -50ms of delay: +If the host controller supports HostNotify, this message with debug level +should appear (Linux 6.11 and later):: -# i2cset -y 0 0x30 0x01 0x50 0x80 0x05 i + Detected HostNotify from address 0x30 -0x02 SMBUS_HOST_NOTIFY (also needs master mode) - DATAL - low byte of the status word to send - DATAH - high byte of the status word to send +0x03 SMBUS_BLOCK_PROC_CALL +~~~~~~~~~~~~~~~~~~~~~~~~~~ -This test will send an SMBUS_HOST_NOTIFY message to the host. Note that the -status word is currently ignored in the Linux Kernel. Example to send a -notification after 10ms: +.. list-table:: + :header-rows: 1 -# i2cset -y 0 0x30 0x02 0x42 0x64 0x01 i + * - CMD + - DATAL + - DATAH + - DELAY -0x03 SMBUS_BLOCK_PROC_CALL (partial command) - DATAL - must be '1', i.e. one further byte will be written - DATAH - number of bytes to be sent back - DELAY - not applicable, partial command! + * - 0x03 + - must be '1', i.e. one further byte will be written + - number of bytes to be sent back + - leave out, partial command! -This test will respond to a block process call as defined by the SMBus -specification. The one data byte written specifies how many bytes will be sent -back in the following read transfer. Note that in this read transfer, the -testunit will prefix the length of the bytes to follow. So, if your host bus -driver emulates SMBus calls like the majority does, it needs to support the -I2C_M_RECV_LEN flag of an i2c_msg. This is a good testcase for it. The returned -data consists of the length first, and then of an array of bytes from length-1 -to 0. Here is an example which emulates i2c_smbus_block_process_call() using -i2ctransfer (you need i2c-tools v4.2 or later): +Partial command. This test will respond to a block process call as defined by +the SMBus specification. The one data byte written specifies how many bytes +will be sent back in the following read transfer. Note that in this read +transfer, the testunit will prefix the length of the bytes to follow. So, if +your host bus driver emulates SMBus calls like the majority does, it needs to +support the I2C_M_RECV_LEN flag of an i2c_msg. This is a good testcase for it. +The returned data consists of the length first, and then of an array of bytes +from length-1 to 0. Here is an example which emulates +i2c_smbus_block_process_call() using i2ctransfer (you need i2c-tools v4.2 or +later):: -# i2ctransfer -y 0 w3@0x30 0x03 0x01 0x10 r? -0x10 0x0f 0x0e 0x0d 0x0c 0x0b 0x0a 0x09 0x08 0x07 0x06 0x05 0x04 0x03 0x02 0x01 0x00 + # i2ctransfer -y 0 w3@0x30 0x03 0x01 0x10 r? + 0x10 0x0f 0x0e 0x0d 0x0c 0x0b 0x0a 0x09 0x08 0x07 0x06 0x05 0x04 0x03 0x02 0x01 0x00 diff --git a/Documentation/iio/adis16475.rst b/Documentation/iio/adis16475.rst index 130f9e97cc17..4bf0998be36e 100644 --- a/Documentation/iio/adis16475.rst +++ b/Documentation/iio/adis16475.rst @@ -380,24 +380,5 @@ data is structured. 4. IIO Interfacing Tools ======================== -Linux Kernel Tools ------------------- - -Linux Kernel provides some userspace tools that can be used to retrieve data -from IIO sysfs: - -* lsiio: example application that provides a list of IIO devices and triggers -* iio_event_monitor: example application that reads events from an IIO device - and prints them -* iio_generic_buffer: example application that reads data from buffer -* iio_utils: set of APIs, typically used to access sysfs files. - -LibIIO ------- - -LibIIO is a C/C++ library that provides generic access to IIO devices. The -library abstracts the low-level details of the hardware, and provides a simple -yet complete programming interface that can be used for advanced projects. - -For more information about LibIIO, please see: -https://github.com/analogdevicesinc/libiio +See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO +interfacing tools. diff --git a/Documentation/iio/adis16480.rst b/Documentation/iio/adis16480.rst new file mode 100644 index 000000000000..bc78fa04d958 --- /dev/null +++ b/Documentation/iio/adis16480.rst @@ -0,0 +1,443 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================ +ADIS16480 driver +================ + +This driver supports Analog Device's IMUs on SPI bus. + +1. Supported devices +==================== + +* `ADIS16375 <https://www.analog.com/ADIS16375>`_ +* `ADIS16480 <https://www.analog.com/ADIS16480>`_ +* `ADIS16485 <https://www.analog.com/ADIS16485>`_ +* `ADIS16488 <https://www.analog.com/ADIS16488>`_ +* `ADIS16490 <https://www.analog.com/ADIS16490>`_ +* `ADIS16495 <https://www.analog.com/ADIS16495>`_ +* `ADIS16497 <https://www.analog.com/ADIS16497>`_ +* `ADIS16545 <https://www.analog.com/ADIS16545>`_ +* `ADIS16547 <https://www.analog.com/ADIS16547>`_ + +Each supported device is a complete inertial system that includes a triaxial +gyroscope and a triaxial accelerometer. Each inertial sensor in device combines +with signal conditioning that optimizes dynamic performance. The factory +calibration characterizes each sensor for sensitivity, bias, and alignment. As +a result, each sensor has its own dynamic compensation formulas that provide +accurate sensor measurements. + +2. Device attributes +==================== + +Accelerometer, gyroscope measurements are always provided. Furthermore, the +driver offers the capability to retrieve the delta angle and the delta velocity +measurements computed by the device. + +The delta angle measurements represent a calculation of angular displacement +between each sample update, while the delta velocity measurements represent a +calculation of linear velocity change between each sample update. + +Finally, temperature data are provided which show a coarse measurement of +the temperature inside of the IMU device. This data is most useful for +monitoring relative changes in the thermal environment. + +ADIS16480 and ADIS16488 also provide access to barometric pressure data and +triaxial magnetometer measurements. + +Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``, +where X is the IIO index of the device. Under these folders reside a set of +device files, depending on the characteristics and features of the hardware +device in questions. These files are consistently generalized and documented in +the IIO ABI documentation. + +The following tables show the adis16480 related device files, found in the +specific device folder path ``/sys/bus/iio/devices/iio:deviceX``. + +**Available only for ADIS16480 and ADIS16488:** + ++------------------------------------------+---------------------------------------------------------+ +| 3-Axis Magnetometer related device files | Description | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_scale | Scale for the magnetometer channels. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_x_calibbias | Calibration offset for the X-axis magnetometer channel. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis magnetometer channel. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_x_raw | Raw X-axis magnetometer channel value. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_y_calibbias | Calibration offset for the Y-axis magnetometer channel. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis magnetometer channel. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_y_raw | Raw Y-axis magnetometer channel value. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_z_calibbias | Calibration offset for the Z-axis magnetometer channel. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis magnetometer channel. | ++------------------------------------------+---------------------------------------------------------+ +| in_magn_z_raw | Raw Z-axis magnetometer channel value. | ++------------------------------------------+---------------------------------------------------------+ + ++------------------------------------------+-----------------------------------------------------+ +| Barometric pressure sensor related files | Description | ++------------------------------------------+-----------------------------------------------------+ +| in_pressure0_calibbias | Calibration offset for barometric pressure channel. | ++------------------------------------------+-----------------------------------------------------+ +| in_pressure0_raw | Raw barometric pressure channel value. | ++------------------------------------------+-----------------------------------------------------+ +| in_pressure0_scale | Scale for the barometric pressure sensor channel. | ++------------------------------------------+-----------------------------------------------------+ + +**Available for all supported devices:** + ++-------------------------------------------+----------------------------------------------------------+ +| 3-Axis Accelerometer related device files | Description | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_scale | Scale for the accelerometer channels. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_x_calibscale | Calibration scale for the X-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_x_raw | Raw X-axis accelerometer channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_y_calibbias | Calibration offset for the Y-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_y_calibscale | Calibration scale for the Y-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_y_raw | Raw Y-axis accelerometer channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_z_calibbias | Calibration offset for the Z-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_z_calibscale | Calibration scale for the Z-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis accelerometer channel. | ++-------------------------------------------+----------------------------------------------------------+ +| in_accel_z_raw | Raw Z-axis accelerometer channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_deltavelocity_scale | Scale for delta velocity channels. | ++-------------------------------------------+----------------------------------------------------------+ +| in_deltavelocity_x_raw | Raw X-axis delta velocity channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_deltavelocity_y_raw | Raw Y-axis delta velocity channel value. | ++-------------------------------------------+----------------------------------------------------------+ +| in_deltavelocity_z_raw | Raw Z-axis delta velocity channel value. | ++-------------------------------------------+----------------------------------------------------------+ + ++--------------------------------------------+------------------------------------------------------+ +| 3-Axis Gyroscope related device files | Description | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_scale | Scale for the gyroscope channels. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_x_calibbias | Calibration offset for the X-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_x_calibscale | Calibration scale for the X-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_x_raw | Raw X-axis gyroscope channel value. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_y_calibbias | Calibration offset for the Y-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_y_calibscale | Calibration scale for the Y-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_y_raw | Raw Y-axis gyroscope channel value. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_z_calibbias | Calibration offset for the Z-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_z_calibscale | Calibration scale for the Z-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis gyroscope channel. | ++--------------------------------------------+------------------------------------------------------+ +| in_anglvel_z_raw | Raw Z-axis gyroscope channel value. | ++--------------------------------------------+------------------------------------------------------+ +| in_deltaangl_scale | Scale for delta angle channels. | ++--------------------------------------------+------------------------------------------------------+ +| in_deltaangl_x_raw | Raw X-axis delta angle channel value. | ++--------------------------------------------+------------------------------------------------------+ +| in_deltaangl_y_raw | Raw Y-axis delta angle channel value. | ++--------------------------------------------+------------------------------------------------------+ +| in_deltaangl_z_raw | Raw Z-axis delta angle channel value. | ++--------------------------------------------+------------------------------------------------------+ + ++----------------------------------+-------------------------------------------+ +| Temperature sensor related files | Description | ++----------------------------------+-------------------------------------------+ +| in_temp0_raw | Raw temperature channel value. | ++----------------------------------+-------------------------------------------+ +| in_temp0_offset | Offset for the temperature sensor channel.| ++----------------------------------+-------------------------------------------+ +| in_temp0_scale | Scale for the temperature sensor channel. | ++----------------------------------+-------------------------------------------+ + ++-------------------------------+---------------------------------------------------------+ +| Miscellaneous device files | Description | ++-------------------------------+---------------------------------------------------------+ +| name | Name of the IIO device. | ++-------------------------------+---------------------------------------------------------+ +| sampling_frequency | Currently selected sample rate. | ++-------------------------------+---------------------------------------------------------+ + +The following table shows the adis16480 related device debug files, found in the +specific device debug folder path ``/sys/kernel/debug/iio/iio:deviceX``. + ++----------------------+-------------------------------------------------------------------------+ +| Debugfs device files | Description | ++----------------------+-------------------------------------------------------------------------+ +| serial_number | The serial number of the chip in hexadecimal format. | ++----------------------+-------------------------------------------------------------------------+ +| product_id | Chip specific product id (e.g. 16480, 16488, 16545, etc.). | ++----------------------+-------------------------------------------------------------------------+ +| flash_count | The number of flash writes performed on the device. | ++----------------------+-------------------------------------------------------------------------+ +| firmware_revision | String containing the firmware revision in the following format ##.##. | ++----------------------+-------------------------------------------------------------------------+ +| firmware_date | String containing the firmware date in the following format mm-dd-yyyy. | ++----------------------+-------------------------------------------------------------------------+ + +Channels processed values +------------------------- + +A channel value can be read from its _raw attribute. The value returned is the +raw value as reported by the devices. To get the processed value of the channel, +apply the following formula: + +.. code-block:: bash + + processed value = (_raw + _offset) * _scale + +Where _offset and _scale are device attributes. If no _offset attribute is +present, simply assume its value is 0. + +The adis16480 driver offers data for 7 types of channels, the table below shows +the measurement units for the processed value, which are defined by the IIO +framework: + ++--------------------------------------+---------------------------+ +| Channel type | Measurement unit | ++--------------------------------------+---------------------------+ +| Acceleration on X, Y, and Z axis | Meters per Second squared | ++--------------------------------------+---------------------------+ +| Angular velocity on X, Y and Z axis | Radians per second | ++--------------------------------------+---------------------------+ +| Delta velocity on X. Y, and Z axis | Meters per Second | ++--------------------------------------+---------------------------+ +| Delta angle on X, Y, and Z axis | Radians | ++--------------------------------------+---------------------------+ +| Temperature | Millidegrees Celsius | ++--------------------------------------+---------------------------+ +| Magnetic field along X, Y and Z axis | Gauss | ++--------------------------------------+---------------------------+ +| Barometric pressure | kilo Pascal | ++--------------------------------------+---------------------------+ + +Usage examples +-------------- + +Show device name: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat name + adis16545-1 + +Show accelerometer channels value: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw + 1376728 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw + 4487621 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw + 262773792 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale + 0.000000037 + +- X-axis acceleration = in_accel_x_raw * in_accel_scale = 0.050938936 m/s^2 +- Y-axis acceleration = in_accel_y_raw * in_accel_scale = 0.166041977 m/s^2 +- Z-axis acceleration = in_accel_z_raw * in_accel_scale = 9.722630304 m/s^2 + +Show gyroscope channels value: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_x_raw + -1041702 + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_raw + -273013 + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_z_raw + 2745116 + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_scale + 0.000000001 + +- X-axis angular velocity = in_anglvel_x_raw * in_anglvel_scale = −0.001041702 rad/s +- Y-axis angular velocity = in_anglvel_y_raw * in_anglvel_scale = −0.000273013 rad/s +- Z-axis angular velocity = in_anglvel_z_raw * in_anglvel_scale = 0.002745116 rad/s + +Set calibration offset for accelerometer channels: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias + 0 + + root:/sys/bus/iio/devices/iio:device0> echo 5000 > in_accel_x_calibbias + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias + 5000 + +Set calibration offset for gyroscope channels: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias + 0 + + root:/sys/bus/iio/devices/iio:device0> echo -5000 > in_anglvel_y_calibbias + root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias + -5000 + +Set sampling frequency: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency + 4250.000000 + + root:/sys/bus/iio/devices/iio:device0> echo 1000 > sampling_frequency + 1062.500000 + +Set bandwidth for accelerometer channels: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_filter_low_pass_3db_frequency + 0 + + root:/sys/bus/iio/devices/iio:device0> echo 300 > in_accel_x_filter_low_pass_3db_frequency + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_filter_low_pass_3db_frequency + 300 + +Show serial number: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat serial_number + 0x000c + +Show product id: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat product_id + 16545 + +Show flash count: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat flash_count + 88 + +Show firmware revision: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat firmware_revision + 1.4 + +Show firmware date: + +.. code-block:: bash + + root:/sys/kernel/debug/iio/iio:device0> cat firmware_date + 09-23-2023 + +3. Device buffers +================= + +This driver supports IIO buffers. + +All devices support retrieving the raw acceleration, gyroscope and temperature +measurements using buffers. + +The following device families also support retrieving the delta velocity, delta +angle and temperature measurements using buffers: + +- ADIS16545 +- ADIS16547 + +However, when retrieving acceleration or gyroscope data using buffers, delta +readings will not be available and vice versa. This is because the device only +allows to read either acceleration and gyroscope data or delta velocity and +delta angle data at a time and switching between these two burst data selection +modes is time consuming. + +Usage examples +-------------- + +Set device trigger in current_trigger, if not already set: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger + + root:/sys/bus/iio/devices/iio:device0> echo adis16545-1-dev0 > trigger/current_trigger + root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger + adis16545-1-dev0 + +Select channels for buffer read: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_x_en + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_y_en + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_z_en + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_temp0_en + +Set the number of samples to be stored in the buffer: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length + +Enable buffer readings: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable + +Obtain buffered data:: + + root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0 + ... + 00006aa0 09 62 00 00 ff ff fc a4 00 00 01 69 00 03 3c 08 |.b.........i..<.| + 00006ab0 09 61 00 00 00 00 02 96 00 00 02 8f 00 03 37 50 |.a............7P| + 00006ac0 09 61 00 00 00 00 12 3d 00 00 0b 89 00 03 2c 0b |.a.....=......,.| + 00006ad0 09 61 00 00 00 00 1e dc 00 00 16 dd 00 03 25 bf |.a............%.| + 00006ae0 09 61 00 00 00 00 1e e3 00 00 1b bf 00 03 27 0b |.a............'.| + 00006af0 09 61 00 00 00 00 15 50 00 00 19 44 00 03 30 fd |.a.....P...D..0.| + 00006b00 09 61 00 00 00 00 09 0e 00 00 14 41 00 03 3d 7f |.a.........A..=.| + 00006b10 09 61 00 00 ff ff ff f0 00 00 0e bc 00 03 48 d0 |.a............H.| + 00006b20 09 63 00 00 00 00 00 9f 00 00 0f 37 00 03 4c fe |.c.........7..L.| + 00006b30 09 64 00 00 00 00 0b f6 00 00 18 92 00 03 43 22 |.d............C"| + 00006b40 09 64 00 00 00 00 18 df 00 00 22 33 00 03 33 ab |.d........"3..3.| + 00006b50 09 63 00 00 00 00 1e 81 00 00 26 be 00 03 29 60 |.c........&...)`| + 00006b60 09 63 00 00 00 00 1b 13 00 00 22 2f 00 03 23 91 |.c........"/..#.| + ... + +See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered +data is structured. + +4. IIO Interfacing Tools +======================== + +See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO +interfacing tools. diff --git a/Documentation/iio/iio_dmabuf_api.rst b/Documentation/iio/iio_dmabuf_api.rst new file mode 100644 index 000000000000..2836cadbd495 --- /dev/null +++ b/Documentation/iio/iio_dmabuf_api.rst @@ -0,0 +1,54 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +High-speed DMABUF interface for IIO +=================================== + +1. Overview +=========== + +The Industrial I/O subsystem supports access to buffers through a +file-based interface, with read() and write() access calls through the +IIO device's dev node. + +It additionally supports a DMABUF based interface, where the userspace +can attach DMABUF objects (externally created) to an IIO buffer, and +subsequently use them for data transfers. + +A userspace application can then use this interface to share DMABUF +objects between several interfaces, allowing it to transfer data in a +zero-copy fashion, for instance between IIO and the USB stack. + +The userspace application can also memory-map the DMABUF objects, and +access the sample data directly. The advantage of doing this vs. the +read() interface is that it avoids an extra copy of the data between the +kernel and userspace. This is particularly useful for high-speed devices +which produce several megabytes or even gigabytes of data per second. +It does however increase the userspace-kernelspace synchronization +overhead, as the DMA_BUF_SYNC_START and DMA_BUF_SYNC_END IOCTLs have to +be used for data integrity. + +2. User API +=========== + +As part of this interface, three new IOCTLs have been added. These three +IOCTLs have to be performed on the IIO buffer's file descriptor, which +can be obtained using the IIO_BUFFER_GET_FD_IOCTL() ioctl. + + ``IIO_BUFFER_DMABUF_ATTACH_IOCTL(int fd)`` + Attach the DMABUF object, identified by its file descriptor, to the + IIO buffer. Returns zero on success, and a negative errno value on + error. + + ``IIO_BUFFER_DMABUF_DETACH_IOCTL(int fd)`` + Detach the given DMABUF object, identified by its file descriptor, + from the IIO buffer. Returns zero on success, and a negative errno + value on error. + + Note that closing the IIO buffer's file descriptor will + automatically detach all previously attached DMABUF objects. + + ``IIO_BUFFER_DMABUF_ENQUEUE_IOCTL(struct iio_dmabuf *iio_dmabuf)`` + Enqueue a previously attached DMABUF object to the buffer queue. + Enqueued DMABUFs will be read from (if output buffer) or written to + (if input buffer) as long as the buffer is enabled. diff --git a/Documentation/iio/iio_tools.rst b/Documentation/iio/iio_tools.rst new file mode 100644 index 000000000000..cc691c7f6365 --- /dev/null +++ b/Documentation/iio/iio_tools.rst @@ -0,0 +1,27 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +IIO Interfacing Tools +===================== + +1. Linux Kernel Tools +===================== + +Linux Kernel provides some userspace tools that can be used to retrieve data +from IIO sysfs: + +* lsiio: example application that provides a list of IIO devices and triggers +* iio_event_monitor: example application that reads events from an IIO device + and prints them +* iio_generic_buffer: example application that reads data from buffer +* iio_utils: set of APIs, typically used to access sysfs files. + +2. LibIIO +========= + +LibIIO is a C/C++ library that provides generic access to IIO devices. The +library abstracts the low-level details of the hardware, and provides a simple +yet complete programming interface that can be used for advanced projects. + +For more information about LibIIO, please see: +https://github.com/analogdevicesinc/libiio diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst index fb6f9d743211..9cb4c50cb20d 100644 --- a/Documentation/iio/index.rst +++ b/Documentation/iio/index.rst @@ -9,6 +9,8 @@ Industrial I/O iio_configfs iio_devbuf + iio_dmabuf_api + iio_tools Industrial I/O Kernel Drivers ============================= @@ -18,5 +20,6 @@ Industrial I/O Kernel Drivers ad7944 adis16475 + adis16480 bno055 ep93xx_adc diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 1fb3f5e6193c..71b38a7670f3 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -409,16 +409,9 @@ choices:: "endchoice" This defines a choice group and accepts any of the above attributes as -options. A choice can only be of type bool or tristate. If no type is -specified for a choice, its type will be determined by the type of -the first choice element in the group or remain unknown if none of the -choice elements have a type specified, as well. - -While a boolean choice only allows a single config entry to be -selected, a tristate choice also allows any number of config entries -to be set to 'm'. This can be used if multiple drivers for a single -hardware exists and only a single driver can be compiled/loaded into -the kernel, but all drivers can be compiled as modules. +options. + +A choice only allows a single config entry to be selected. comment:: diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index 991ce6081e35..be43990f1e7f 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -578,7 +578,7 @@ cc-option Note: cc-option uses KBUILD_CFLAGS for $(CC) options cc-option-yn - cc-option-yn is used to check if gcc supports a given option + cc-option-yn is used to check if $(CC) supports a given option and return "y" if supported, otherwise "n". Example:: @@ -596,7 +596,7 @@ cc-option-yn Note: cc-option-yn uses KBUILD_CFLAGS for $(CC) options cc-disable-warning - cc-disable-warning checks if gcc supports a given warning and returns + cc-disable-warning checks if $(CC) supports a given warning and returns the commandline switch to disable it. This special function is needed, because gcc 4.4 and later accept any unknown -Wno-* option and only warn about it if there is another warning in the source file. @@ -606,7 +606,7 @@ cc-disable-warning KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) In the above example, -Wno-unused-but-set-variable will be added to - KBUILD_CFLAGS only if gcc really accepts it. + KBUILD_CFLAGS only if $(CC) really accepts it. gcc-min-version gcc-min-version tests if the value of $(CONFIG_GCC_VERSION) is greater than diff --git a/Documentation/leds/leds-blinkm.rst b/Documentation/leds/leds-blinkm.rst index c74b5bc877b1..2d3c226a371a 100644 --- a/Documentation/leds/leds-blinkm.rst +++ b/Documentation/leds/leds-blinkm.rst @@ -7,7 +7,7 @@ The leds-blinkm driver supports the devices of the BlinkM family. They are RGB-LED modules driven by a (AT)tiny microcontroller and communicate through I2C. The default address of these modules is 0x09 but this can be changed through a command. By this you could -dasy-chain up to 127 BlinkMs on an I2C bus. +daisy-chain up to 127 BlinkMs on an I2C bus. The device accepts RGB and HSB color values through separate commands. Also you can store blinking sequences as "scripts" in diff --git a/Documentation/locking/hwspinlock.rst b/Documentation/locking/hwspinlock.rst index 6f03713b7003..2ffaa3cbd63f 100644 --- a/Documentation/locking/hwspinlock.rst +++ b/Documentation/locking/hwspinlock.rst @@ -87,6 +87,17 @@ Should be called from a process context (might sleep). :: + int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id); + +After verifying the owner of the hwspinlock, release a previously acquired +hwspinlock; returns 0 on success, or an appropriate error code on failure +(e.g. -EOPNOTSUPP if the bust operation is not defined for the specific +hwspinlock). + +Should be called from a process context (might sleep). + +:: + int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout); Lock a previously-assigned hwspinlock with a timeout limit (specified in diff --git a/Documentation/maintainer/feature-and-driver-maintainers.rst b/Documentation/maintainer/feature-and-driver-maintainers.rst index f04cc183e1de..fb94a9b29061 100644 --- a/Documentation/maintainer/feature-and-driver-maintainers.rst +++ b/Documentation/maintainer/feature-and-driver-maintainers.rst @@ -83,6 +83,17 @@ bugs as well, if the report is of reasonable quality or indicates a problem that might be severe -- especially if they have *Supported* status of the codebase in the MAINTAINERS file. +Open development +---------------- + +Discussions about user reported issues, and development of new code +should be conducted in a manner typical for the larger subsystem. +It is common for development within a single company to be conducted +behind closed doors. However, development and discussions initiated +by community members must not be redirected from public to closed forums +or to private email conversations. Reasonable exceptions to this guidance +include discussions about security related issues. + Selecting the maintainer ======================== diff --git a/Documentation/maintainer/maintainer-entry-profile.rst b/Documentation/maintainer/maintainer-entry-profile.rst index b49fb6dc4d0c..cda5d691e967 100644 --- a/Documentation/maintainer/maintainer-entry-profile.rst +++ b/Documentation/maintainer/maintainer-entry-profile.rst @@ -109,3 +109,4 @@ to do something different in the near future. ../driver-api/vfio-pci-device-specific-driver-acceptance ../nvme/feature-and-quirk-policy ../filesystems/xfs/xfs-maintainer-entry-profile + ../mm/damon/maintainer-profile diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst index 2d0ce9138588..8c5b226d8313 100644 --- a/Documentation/misc-devices/index.rst +++ b/Documentation/misc-devices/index.rst @@ -21,6 +21,7 @@ fit into other categories. isl29003 lis3lv02d max6875 + mrvl_cn10k_dpi oxsemi-tornado pci-endpoint-test spear-pcie-gadget diff --git a/Documentation/misc-devices/mrvl_cn10k_dpi.rst b/Documentation/misc-devices/mrvl_cn10k_dpi.rst new file mode 100644 index 000000000000..a75e372723d8 --- /dev/null +++ b/Documentation/misc-devices/mrvl_cn10k_dpi.rst @@ -0,0 +1,52 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================================== +Marvell CN10K DMA packet interface (DPI) driver +=============================================== + +Overview +======== + +DPI is a DMA packet interface hardware block in Marvell's CN10K silicon. +DPI hardware comprises a physical function (PF), its virtual functions, +mailbox logic, and a set of DMA engines & DMA command queues. + +DPI PF function is an administrative function which services the mailbox +requests from its VF functions and provisions DMA engine resources to +it's VF functions. + +mrvl_cn10k_dpi.ko misc driver loads on DPI PF device and services the +mailbox commands submitted by the VF devices and accordingly initializes +the DMA engines and VF device's DMA command queues. Also, driver creates +/dev/mrvl-cn10k-dpi node to set DMA engine and PEM (PCIe interface) port +attributes like fifo length, molr, mps & mrrs. + +DPI PF driver is just an administrative driver to setup its VF device's +queues and provisions the hardware resources, it cannot initiate any +DMA operations. Only VF devices are provisioned with DMA capabilities. + +Driver location +=============== + +drivers/misc/mrvl_cn10k_dpi.c + +Driver IOCTLs +============= + +:c:macro::`DPI_MPS_MRRS_CFG` +ioctl that sets max payload size & max read request size parameters of +a pem port to which DMA engines are wired. + + +:c:macro::`DPI_ENGINE_CFG` +ioctl that sets DMA engine's fifo sizes & max outstanding load request +thresholds. + +User space code example +======================= + +DPI VF devices are probed and accessed from user space applications using +vfio-pci driver. Below is a sample dpi dma application to demonstrate on +how applications use mailbox and ioctl services from DPI PF kernel driver. + +https://github.com/MarvellEmbeddedProcessors/dpi-sample-app diff --git a/Documentation/mm/allocation-profiling.rst b/Documentation/mm/allocation-profiling.rst index d3b733b41ae6..ffd6655b7be2 100644 --- a/Documentation/mm/allocation-profiling.rst +++ b/Documentation/mm/allocation-profiling.rst @@ -46,7 +46,6 @@ Example output:: 55M 4887 mm/slub.c:2259 func:alloc_slab_page 122M 31168 mm/page_ext.c:270 func:alloc_page_ext -=================== Theory of operation =================== diff --git a/Documentation/mm/arch_pgtable_helpers.rst b/Documentation/mm/arch_pgtable_helpers.rst index ad50ca6f495e..af245161d8e7 100644 --- a/Documentation/mm/arch_pgtable_helpers.rst +++ b/Documentation/mm/arch_pgtable_helpers.rst @@ -90,8 +90,6 @@ PMD Page Table Helpers +---------------------------+--------------------------------------------------+ | pmd_leaf | Tests a leaf mapped PMD | +---------------------------+--------------------------------------------------+ -| pmd_huge | Tests a HugeTLB mapped PMD | -+---------------------------+--------------------------------------------------+ | pmd_trans_huge | Tests a Transparent Huge Page (THP) at PMD | +---------------------------+--------------------------------------------------+ | pmd_present | Tests whether pmd_page() points to valid memory | @@ -169,8 +167,6 @@ PUD Page Table Helpers +---------------------------+--------------------------------------------------+ | pud_leaf | Tests a leaf mapped PUD | +---------------------------+--------------------------------------------------+ -| pud_huge | Tests a HugeTLB mapped PUD | -+---------------------------+--------------------------------------------------+ | pud_trans_huge | Tests a Transparent Huge Page (THP) at PUD | +---------------------------+--------------------------------------------------+ | pud_present | Tests a valid mapped PUD | diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst index 3df387249937..8730c246ceaa 100644 --- a/Documentation/mm/damon/design.rst +++ b/Documentation/mm/damon/design.rst @@ -16,53 +16,24 @@ called DAMON ``context``. DAMON executes each context with a kernel thread called ``kdamond``. Multiple kdamonds could run in parallel, for different types of monitoring. +To know how user-space can do the configurations and start/stop DAMON, refer to +:ref:`DAMON sysfs interface <sysfs_interface>` documentation. + Overall Architecture ==================== DAMON subsystem is configured with three layers including -- Operations Set: Implements fundamental operations for DAMON that depends on - the given monitoring target address-space and available set of - software/hardware primitives, -- Core: Implements core logics including monitoring overhead/accurach control - and access-aware system operations on top of the operations set layer, and -- Modules: Implements kernel modules for various purposes that provides - interfaces for the user space, on top of the core layer. - - -.. _damon_design_configurable_operations_set: - -Configurable Operations Set ---------------------------- - -For data access monitoring and additional low level work, DAMON needs a set of -implementations for specific operations that are dependent on and optimized for -the given target address space. On the other hand, the accuracy and overhead -tradeoff mechanism, which is the core logic of DAMON, is in the pure logic -space. DAMON separates the two parts in different layers, namely DAMON -Operations Set and DAMON Core Logics Layers, respectively. It further defines -the interface between the layers to allow various operations sets to be -configured with the core logic. - -Due to this design, users can extend DAMON for any address space by configuring -the core logic to use the appropriate operations set. If any appropriate set -is unavailable, users can implement one on their own. - -For example, physical memory, virtual memory, swap space, those for specific -processes, NUMA nodes, files, and backing memory devices would be supportable. -Also, if some architectures or devices supporting special optimized access -check primitives, those will be easily configurable. - - -Programmable Modules --------------------- - -Core layer of DAMON is implemented as a framework, and exposes its application -programming interface to all kernel space components such as subsystems and -modules. For common use cases of DAMON, DAMON subsystem provides kernel -modules that built on top of the core layer using the API, which can be easily -used by the user space end users. +- :ref:`Operations Set <damon_operations_set>`: Implements fundamental + operations for DAMON that depends on the given monitoring target + address-space and available set of software/hardware primitives, +- :ref:`Core <damon_core_logic>`: Implements core logics including monitoring + overhead/accuracy control and access-aware system operations on top of the + operations set layer, and +- :ref:`Modules <damon_modules>`: Implements kernel modules for various + purposes that provides interfaces for the user space, on top of the core + layer. .. _damon_operations_set: @@ -70,11 +41,32 @@ used by the user space end users. Operations Set Layer ==================== -The monitoring operations are defined in two parts: +.. _damon_design_configurable_operations_set: + +For data access monitoring and additional low level work, DAMON needs a set of +implementations for specific operations that are dependent on and optimized for +the given target address space. For example, below two operations for access +monitoring are address-space dependent. 1. Identification of the monitoring target address range for the address space. 2. Access check of specific address range in the target space. +DAMON consolidates these implementations in a layer called DAMON Operations +Set, and defines the interface between it and the upper layer. The upper layer +is dedicated for DAMON's core logics including the mechanism for control of the +monitoring accruracy and the overhead. + +Hence, DAMON can easily be extended for any address space and/or available +hardware features by configuring the core logic to use the appropriate +operations set. If there is no available operations set for a given purpose, a +new operations set can be implemented following the interface between the +layers. + +For example, physical memory, virtual memory, swap space, those for specific +processes, NUMA nodes, files, and backing memory devices would be supportable. +Also, if some architectures or devices support special optimized access check +features, those will be easily configurable. + DAMON currently provides below three operation sets. Below two subsections describe how those work. @@ -82,6 +74,10 @@ describe how those work. - fvaddr: Monitor fixed virtual address ranges - paddr: Monitor the physical address space of the system +To know how user-space can do the configuration via :ref:`DAMON sysfs interface +<sysfs_interface>`, refer to :ref:`operations <sysfs_context>` file part of the +documentation. + .. _damon_design_vaddr_target_regions_construction: @@ -140,9 +136,12 @@ conflict with the reclaim logic using ``PG_idle`` and ``PG_young`` page flags, as Idle page tracking does. +.. _damon_core_logic: + Core Logics =========== +.. _damon_design_monitoring: Monitoring ---------- @@ -152,6 +151,10 @@ monitoring attributes, ``sampling interval``, ``aggregation interval``, ``update interval``, ``minimum number of regions``, and ``maximum number of regions``. +To know how user-space can set the attributes via :ref:`DAMON sysfs interface +<sysfs_interface>`, refer to :ref:`monitoring_attrs <sysfs_monitoring_attrs>` +part of the documentation. + Access Frequency Monitoring ~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -192,7 +195,7 @@ one page in the region is required to be checked. Thus, for each ``sampling interval``, DAMON randomly picks one page in each region, waits for one ``sampling interval``, checks whether the page is accessed meanwhile, and increases the access frequency counter of the region if so. The counter is -called ``nr_regions`` of the region. Therefore, the monitoring overhead is +called ``nr_accesses`` of the region. Therefore, the monitoring overhead is controllable by setting the number of regions. DAMON allows users to set the minimum and the maximum number of regions for the trade-off. @@ -209,11 +212,18 @@ the data access pattern can be dynamically changed. This will result in low monitoring quality. To keep the assumption as much as possible, DAMON adaptively merges and splits each region based on their access frequency. -For each ``aggregation interval``, it compares the access frequencies of -adjacent regions and merges those if the frequency difference is small. Then, -after it reports and clears the aggregated access frequency of each region, it -splits each region into two or three regions if the total number of regions -will not exceed the user-specified maximum number of regions after the split. +For each ``aggregation interval``, it compares the access frequencies +(``nr_accesses``) of adjacent regions. If the difference is small, and if the +sum of the two regions' sizes is smaller than the size of total regions divided +by the ``minimum number of regions``, DAMON merges the two regions. If the +resulting number of total regions is still higher than ``maximum number of +regions``, it repeats the merging with increasing access frequenceis difference +threshold until the upper-limit of the number of regions is met, or the +threshold becomes higher than possible maximum value (``aggregation interval`` +divided by ``sampling interval``). Then, after it reports and clears the +aggregated access frequency of each region, it splits each region into two or +three regions if the total number of regions will not exceed the user-specified +maximum number of regions after the split. In this way, DAMON provides its best-effort quality and minimal overhead while keeping the bounds users set for their trade-off. @@ -248,6 +258,11 @@ and applies it to monitoring operations-related data structures such as the abstracted monitoring target memory area only for each of a user-specified time interval (``update interval``). +User-space can get the monitoring results via DAMON sysfs interface and/or +tracepoints. For more details, please refer to the documentations for +:ref:`DAMOS tried regions <sysfs_schemes_tried_regions>` and :ref:`tracepoint`, +respectively. + .. _damon_design_damos: @@ -288,6 +303,10 @@ the access pattern of interest, and applies the user-desired operation actions to the regions, for every user-specified time interval called ``apply_interval``. +To know how user-space can set ``apply_interval`` via :ref:`DAMON sysfs +interface <sysfs_interface>`, refer to :ref:`apply_interval_us <sysfs_scheme>` +part of the documentation. + .. _damon_design_damos_action: @@ -325,6 +344,10 @@ that supports each action are as below. Supported by ``paddr`` operations set. - ``lru_deprio``: Deprioritize the region on its LRU lists. Supported by ``paddr`` operations set. + - ``migrate_hot``: Migrate the regions prioritizing warmer regions. + Supported by ``paddr`` operations set. + - ``migrate_cold``: Migrate the regions prioritizing colder regions. + Supported by ``paddr`` operations set. - ``stat``: Do nothing but count the statistics. Supported by all operations sets. @@ -332,6 +355,10 @@ Applying the actions except ``stat`` to a region is considered as changing the region's characteristics. Hence, DAMOS resets the age of regions when any such actions are applied to those. +To know how user-space can set the action via :ref:`DAMON sysfs interface +<sysfs_interface>`, refer to :ref:`action <sysfs_scheme>` part of the +documentation. + .. _damon_design_damos_access_pattern: @@ -345,6 +372,10 @@ interest by setting minimum and maximum values of the three properties. If a region's three properties are in the ranges, DAMOS classifies it as one of the regions that the scheme is having an interest in. +To know how user-space can set the access pattern via :ref:`DAMON sysfs +interface <sysfs_interface>`, refer to :ref:`access_pattern +<sysfs_access_pattern>` part of the documentation. + .. _damon_design_damos_quotas: @@ -364,6 +395,10 @@ feature called quotas. It lets users specify an upper limit of time that DAMOS can use for applying the action, and/or a maximum bytes of memory regions that the action can be applied within a user-specified time duration. +To know how user-space can set the basic quotas via :ref:`DAMON sysfs interface +<sysfs_interface>`, refer to :ref:`quotas <sysfs_quotas>` part of the +documentation. + .. _damon_design_damos_quotas_prioritization: @@ -391,6 +426,10 @@ information to the underlying mechanism. Nevertheless, how and even whether the weight will be respected are up to the underlying prioritization mechanism implementation. +To know how user-space can set the prioritization weights via :ref:`DAMON sysfs +interface <sysfs_interface>`, refer to :ref:`weights <sysfs_quotas>` part of +the documentation. + .. _damon_design_damos_quotas_auto_tuning: @@ -420,6 +459,10 @@ Currently, two ``target_metric`` are provided. DAMOS does the measurement on its own, so only ``target_value`` need to be set by users at the initial time. In other words, DAMOS does self-feedback. +To know how user-space can set the tuning goal metric, the target value, and/or +the current value via :ref:`DAMON sysfs interface <sysfs_interface>`, refer to +:ref:`quota goals <sysfs_schemes_quota_goals>` part of the documentation. + .. _damon_design_damos_watermarks: @@ -442,6 +485,10 @@ is activated. If all schemes are deactivated by the watermarks, the monitoring is also deactivated. In this case, the DAMON worker thread only periodically checks the watermarks and therefore incurs nearly zero overhead. +To know how user-space can set the watermarks via :ref:`DAMON sysfs interface +<sysfs_interface>`, refer to :ref:`watermarks <sysfs_watermarks>` part of the +documentation. + .. _damon_design_damos_filters: @@ -488,6 +535,10 @@ Below types of filters are currently supported. - Applied to pages that belonging to a given DAMON monitoring target. - Handled by the core logic. +To know how user-space can set the watermarks via :ref:`DAMON sysfs interface +<sysfs_interface>`, refer to :ref:`filters <sysfs_filters>` part of the +documentation. + Application Programming Interface --------------------------------- @@ -501,6 +552,8 @@ interface, namely ``include/linux/damon.h``. Please refer to the API :doc:`document </mm/damon/api>` for details of the interface. +.. _damon_modules: + Modules ======= diff --git a/Documentation/mm/damon/index.rst b/Documentation/mm/damon/index.rst index 5e0a50583500..dafd6d028924 100644 --- a/Documentation/mm/damon/index.rst +++ b/Documentation/mm/damon/index.rst @@ -6,7 +6,7 @@ DAMON: Data Access MONitor DAMON is a Linux kernel subsystem that provides a framework for data access monitoring and the monitoring results based system operations. The core -monitoring mechanisms of DAMON (refer to :doc:`design` for the detail) make it +monitoring :ref:`mechanisms <damon_design_monitoring>` of DAMON make it - *accurate* (the monitoring output is useful enough for DRAM level memory management; It might not appropriate for CPU Cache levels, though), @@ -16,15 +16,16 @@ monitoring mechanisms of DAMON (refer to :doc:`design` for the detail) make it of the size of target workloads). Using this framework, therefore, the kernel can operate system in an -access-aware fashion. Because the features are also exposed to the user space, -users who have special information about their workloads can write personalized -applications for better understanding and optimizations of their workloads and -systems. +access-aware fashion. Because the features are also exposed to the :doc:`user +space </admin-guide/mm/damon/index>`, users who have special information about +their workloads can write personalized applications for better understanding +and optimizations of their workloads and systems. -For easier development of such systems, DAMON provides a feature called DAMOS -(DAMon-based Operation Schemes) in addition to the monitoring. Using the -feature, DAMON users in both kernel and user spaces can do access-aware system -operations with no code but simple configurations. +For easier development of such systems, DAMON provides a feature called +:ref:`DAMOS <damon_design_damos>` (DAMon-based Operation Schemes) in addition +to the monitoring. Using the feature, DAMON users in both kernel and :doc:`user +spaces </admin-guide/mm/damon/index>` can do access-aware system operations +with no code but simple configurations. .. toctree:: :maxdepth: 2 @@ -33,3 +34,6 @@ operations with no code but simple configurations. design api maintainer-profile + +To utilize and control DAMON from the user-space, please refer to the +administration :doc:`guide </admin-guide/mm/damon/index>`. diff --git a/Documentation/mm/damon/maintainer-profile.rst b/Documentation/mm/damon/maintainer-profile.rst index 8213cf61d38a..feccf6a0f6c3 100644 --- a/Documentation/mm/damon/maintainer-profile.rst +++ b/Documentation/mm/damon/maintainer-profile.rst @@ -53,6 +53,40 @@ Mon-Fri) in PT (Pacific Time). The response to patches will occasionally be slow. Do not hesitate to send a ping if you have not heard back within a week of sending a patch. +Mailing tool +------------ + +Like many other Linux kernel subsystems, DAMON uses the mailing lists +(damon@lists.linux.dev and linux-mm@kvack.org) as the major communication +channel. There is a simple tool called HacKerMaiL (``hkml``) [8]_ , which is +for people who are not very familiar with the mailing lists based +communication. The tool could be particularly helpful for DAMON community +members since it is developed and maintained by DAMON maintainer. The tool is +also officially announced to support DAMON and general Linux kernel development +workflow. + +In other words, ``hkml`` [8]_ is a mailing tool for DAMON community, which +DAMON maintainer is committed to support. Please feel free to try and report +issues or feature requests for the tool to the maintainer. + +Community meetup +---------------- + +DAMON community is maintaining two bi-weekly meetup series for community +members who prefer synchronous conversations over mails. + +The first one is for any discussion between every community member. No +reservation is needed. + +The seconds one is for discussions on specific topics between restricted +members including the maintainer. The maintainer shares the available time +slots, and attendees should reserve one of those at least 24 hours before the +time slot, by reaching out to the maintainer. + +Schedules and available reservation time slots are available at the Google doc +[9]_ . DAMON maintainer will also provide periodic reminder to the mailing +list (damon@lists.linux.dev). + .. [1] https://git.kernel.org/akpm/mm/h/mm-unstable .. [2] https://git.kernel.org/sj/h/damon/next @@ -61,3 +95,5 @@ of sending a patch. .. [5] https://github.com/awslabs/damon-tests/blob/master/corr/tests/kunit.sh .. [6] https://github.com/awslabs/damon-tests/tree/master/corr .. [7] https://github.com/awslabs/damon-tests/tree/master/perf +.. [8] https://github.com/damonitor/hackermail +.. [9] https://docs.google.com/document/d/1v43Kcj3ly4CYqmAkMaZzLiM2GEnWfgdGbZAH3mi2vpM/edit?usp=sharing diff --git a/Documentation/mm/index.rst b/Documentation/mm/index.rst index 48b9b559ca7b..0be1c7503a01 100644 --- a/Documentation/mm/index.rst +++ b/Documentation/mm/index.rst @@ -2,9 +2,6 @@ Memory Management Documentation =============================== -Memory Management Guide -======================= - This is a guide to understanding the memory management subsystem of Linux. If you are looking for advice on simply allocating memory, see the :ref:`memory_allocation`. For controlling and tuning guides, @@ -26,21 +23,21 @@ see the :doc:`admin guide <../admin-guide/mm/index>`. page_cache shmfs oom - allocation-profiling -Legacy Documentation -==================== +Unsorted Documentation +====================== -This is a collection of older documents about the Linux memory management -(MM) subsystem internals with different level of details ranging from -notes and mailing list responses for elaborating descriptions of data -structures and algorithms. It should all be integrated nicely into the -above structured documentation, or deleted if it has served its purpose. +This is a collection of unsorted documents about the Linux memory management +(MM) subsystem internals with different level of details ranging from notes and +mailing list responses for elaborating descriptions of data structures and +algorithms. It should all be integrated nicely into the above structured +documentation, or deleted if it has served its purpose. .. toctree:: :maxdepth: 1 active_mm + allocation-profiling arch_pgtable_helpers balance damon/index diff --git a/Documentation/mm/unevictable-lru.rst b/Documentation/mm/unevictable-lru.rst index b6a07a26b10d..2feb2ed51ae2 100644 --- a/Documentation/mm/unevictable-lru.rst +++ b/Documentation/mm/unevictable-lru.rst @@ -191,13 +191,13 @@ have become evictable again (via munlock() for example) and have been "rescued" from the unevictable list. However, there may be situations where we decide, for the sake of expediency, to leave an unevictable folio on one of the regular active/inactive LRU lists for vmscan to deal with. vmscan checks for such -folios in all of the shrink_{active|inactive|page}_list() functions and will +folios in all of the shrink_{active|inactive|folio}_list() functions and will "cull" such folios that it encounters: that is, it diverts those folios to the unevictable list for the memory cgroup and node being scanned. There may be situations where a folio is mapped into a VM_LOCKED VMA, but the folio does not have the mlocked flag set. Such folios will make -it all the way to shrink_active_list() or shrink_page_list() where they +it all the way to shrink_active_list() or shrink_folio_list() where they will be detected when vmscan walks the reverse map in folio_referenced() or try_to_unmap(). The folio is culled to the unevictable list when it is released by the shrinker. @@ -269,7 +269,7 @@ the LRU. Such pages can be "noticed" by memory management in several places: (4) in the fault path and when a VM_LOCKED stack segment is expanded; or - (5) as mentioned above, in vmscan:shrink_page_list() when attempting to + (5) as mentioned above, in vmscan:shrink_folio_list() when attempting to reclaim a page in a VM_LOCKED VMA by folio_referenced() or try_to_unmap(). mlocked pages become unlocked and rescued from the unevictable list when: @@ -548,12 +548,12 @@ Some examples of these unevictable pages on the LRU lists are: (3) pages still mapped into VM_LOCKED VMAs, which should be marked mlocked, but events left mlock_count too low, so they were munlocked too early. -vmscan's shrink_inactive_list() and shrink_page_list() also divert obviously +vmscan's shrink_inactive_list() and shrink_folio_list() also divert obviously unevictable pages found on the inactive lists to the appropriate memory cgroup and node unevictable list. rmap's folio_referenced_one(), called via vmscan's shrink_active_list() or -shrink_page_list(), and rmap's try_to_unmap_one() called via shrink_page_list(), +shrink_folio_list(), and rmap's try_to_unmap_one() called via shrink_folio_list(), check for (3) pages still mapped into VM_LOCKED VMAs, and call mlock_vma_folio() to correct them. Such pages are culled to the unevictable list when released by the shrinker. diff --git a/Documentation/mm/vmalloced-kernel-stacks.rst b/Documentation/mm/vmalloced-kernel-stacks.rst index fc8c67833af6..4edca515bfd7 100644 --- a/Documentation/mm/vmalloced-kernel-stacks.rst +++ b/Documentation/mm/vmalloced-kernel-stacks.rst @@ -22,7 +22,7 @@ Kernel stack overflows are often hard to debug and make the kernel susceptible to exploits. Problems could show up at a later time making it difficult to isolate and root-cause. -Virtually-mapped kernel stacks with guard pages causes kernel stack +Virtually mapped kernel stacks with guard pages cause kernel stack overflows to be caught immediately rather than causing difficult to diagnose corruptions. @@ -57,7 +57,7 @@ enable this bool configuration option. The requirements are: VMAP_STACK ---------- -VMAP_STACK bool configuration option when enabled allocates virtually +When enabled, the VMAP_STACK bool configuration option allocates virtually mapped task stacks. This option depends on HAVE_ARCH_VMAP_STACK. - Enable this if you want the use virtually-mapped kernel stacks @@ -83,7 +83,7 @@ the latest code base: Allocation ----------- -When a new kernel thread is created, thread stack is allocated from +When a new kernel thread is created, a thread stack is allocated from virtually contiguous memory pages from the page level allocator. These pages are mapped into contiguous kernel virtual space with PAGE_KERNEL protections. @@ -103,8 +103,8 @@ with PAGE_KERNEL protections. - This does not address interrupt stacks - according to the original patch Thread stack allocation is initiated from clone(), fork(), vfork(), -kernel_thread() via kernel_clone(). Leaving a few hints for searching -the code base to understand when and how thread stack is allocated. +kernel_thread() via kernel_clone(). These are a few hints for searching +the code base to understand when and how a thread stack is allocated. Bulk of the code is in: `kernel/fork.c <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/fork.c>`. diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml index 95b0eb1486bf..94132d30e0e0 100644 --- a/Documentation/netlink/specs/dpll.yaml +++ b/Documentation/netlink/specs/dpll.yaml @@ -479,6 +479,7 @@ operations: name: pin-get doc: | Get list of pins and its attributes. + - dump request without any attributes given - list all the pins in the system - dump request with target dpll - list all the pins registered with diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml index 4510e8d1adcb..ea21fe135b97 100644 --- a/Documentation/netlink/specs/ethtool.yaml +++ b/Documentation/netlink/specs/ethtool.yaml @@ -20,6 +20,25 @@ definitions: name: header-flags type: flags entries: [ compact-bitsets, omit-reply, stats ] + - + name: module-fw-flash-status + type: enum + entries: [ started, in_progress, completed, error ] + - + name: c33-pse-ext-state + enum-name: + type: enum + name-prefix: ethtool-c33-pse-ext-state- + entries: + - none + - error-condition + - mr-mps-valid + - mr-pse-enable + - option-detect-ted + - option-vport-lim + - ovld-detected + - power-not-available + - short-detected attribute-sets: - @@ -415,6 +434,26 @@ attribute-sets: type: u32 - + name: irq-moderation + attributes: + - + name: usec + type: u32 + - + name: pkts + type: u32 + - + name: comps + type: u32 + - + name: profile + attributes: + - + name: irq-moderation + type: nest + multi-attr: true + nested-attributes: irq-moderation + - name: coalesce attributes: - @@ -502,6 +541,15 @@ attribute-sets: - name: tx-aggr-time-usecs type: u32 + - + name: rx-profile + type: nest + nested-attributes: profile + - + name: tx-profile + type: nest + nested-attributes: profile + - name: pause-stat attributes: @@ -892,6 +940,15 @@ attribute-sets: name: power-mode type: u8 - + name: c33-pse-pw-limit + attributes: + - + name: min + type: u32 + - + name: max + type: u32 + - name: pse attributes: - @@ -922,6 +979,33 @@ attribute-sets: name: c33-pse-pw-d-status type: u32 name-prefix: ethtool-a- + - + name: c33-pse-pw-class + type: u32 + name-prefix: ethtool-a- + - + name: c33-pse-actual-pw + type: u32 + name-prefix: ethtool-a- + - + name: c33-pse-ext-state + type: u32 + name-prefix: ethtool-a- + enum: c33-pse-ext-state + - + name: c33-pse-ext-substate + type: u32 + name-prefix: ethtool-a- + - + name: c33-pse-avail-pw-limit + type: u32 + name-prefix: ethtool-a- + - + name: c33-pse-pw-limit-ranges + name-prefix: ethtool-a- + type: nest + multi-attr: true + nested-attributes: c33-pse-pw-limit - name: rss attributes: @@ -975,6 +1059,32 @@ attribute-sets: - name: burst-tmr type: u32 + - + name: module-fw-flash + attributes: + - + name: header + type: nest + nested-attributes: header + - + name: file-name + type: string + - + name: password + type: u32 + - + name: status + type: u32 + enum: module-fw-flash-status + - + name: status-msg + type: string + - + name: done + type: uint + - + name: total + type: uint operations: enum-model: directional @@ -1325,6 +1435,8 @@ operations: - tx-aggr-max-bytes - tx-aggr-max-frames - tx-aggr-time-usecs + - rx-profile + - tx-profile dump: *coalesce-get-op - name: coalesce-set @@ -1611,6 +1723,12 @@ operations: - c33-pse-admin-state - c33-pse-admin-control - c33-pse-pw-d-status + - c33-pse-pw-class + - c33-pse-actual-pw + - c33-pse-ext-state + - c33-pse-ext-substate + - c33-pse-avail-pw-limit + - c33-pse-pw-limit-ranges dump: *pse-get-op - name: pse-set @@ -1624,6 +1742,7 @@ operations: - header - podl-pse-admin-control - c33-pse-admin-control + - c33-pse-avail-pw-limit - name: rss-get doc: Get RSS params. @@ -1634,6 +1753,7 @@ operations: request: attributes: - header + - context reply: attributes: - header @@ -1642,7 +1762,6 @@ operations: - indir - hkey - input_xfrm - dump: *rss-get-op - name: plca-get-cfg doc: Get PLCA params. @@ -1733,3 +1852,28 @@ operations: name: mm-ntf doc: Notification for change in MAC Merge configuration. notify: mm-get + - + name: module-fw-flash-act + doc: Flash transceiver module firmware. + + attribute-set: module-fw-flash + + do: + request: + attributes: + - header + - file-name + - password + - + name: module-fw-flash-ntf + doc: Notification for firmware flashing progress and status. + + attribute-set: module-fw-flash + + event: + attributes: + - header + - status + - status-msg + - done + - total diff --git a/Documentation/netlink/specs/nfsd.yaml b/Documentation/netlink/specs/nfsd.yaml index 6bda7a467301..c87658114852 100644 --- a/Documentation/netlink/specs/nfsd.yaml +++ b/Documentation/netlink/specs/nfsd.yaml @@ -115,6 +115,15 @@ attribute-sets: type: nest nested-attributes: sock multi-attr: true + - + name: pool-mode + attributes: + - + name: mode + type: string + - + name: npools + type: u32 operations: list: @@ -195,3 +204,21 @@ operations: reply: attributes: - addr + - + name: pool-mode-set + doc: set the current server pool-mode + attribute-set: pool-mode + flags: [ admin-perm ] + do: + request: + attributes: + - mode + - + name: pool-mode-get + doc: get info about server pool-mode + attribute-set: pool-mode + do: + reply: + attributes: + - mode + - npools diff --git a/Documentation/netlink/specs/ovs_flow.yaml b/Documentation/netlink/specs/ovs_flow.yaml index 4fdfc6b5cae9..46f5d1cd8a5f 100644 --- a/Documentation/netlink/specs/ovs_flow.yaml +++ b/Documentation/netlink/specs/ovs_flow.yaml @@ -727,6 +727,12 @@ attribute-sets: name: dec-ttl type: nest nested-attributes: dec-ttl-attrs + - + name: psample + type: nest + nested-attributes: psample-attrs + doc: | + Sends a packet sample to psample for external observation. - name: tunnel-key-attrs enum-name: ovs-tunnel-key-attr @@ -938,6 +944,17 @@ attribute-sets: - name: gbp type: u32 + - + name: psample-attrs + enum-name: ovs-psample-attr + name-prefix: ovs-psample-attr- + attributes: + - + name: group + type: u32 + - + name: cookie + type: binary operations: name-prefix: ovs-flow-cmd- diff --git a/Documentation/netlink/specs/tc.yaml b/Documentation/netlink/specs/tc.yaml index 8c01e4e13195..b02d59a0349c 100644 --- a/Documentation/netlink/specs/tc.yaml +++ b/Documentation/netlink/specs/tc.yaml @@ -42,6 +42,16 @@ definitions: - not-in-nw - verbose - + name: tc-flower-key-ctrl-flags + type: flags + entries: + - frag + - firstfrag + - tuncsum + - tundf + - tunoam + - tuncrit + - name: tc-stats type: struct members: @@ -2536,10 +2546,14 @@ attribute-sets: name: key-flags type: u32 byte-order: big-endian + enum: tc-flower-key-ctrl-flags + enum-as-flags: true - name: key-flags-mask type: u32 byte-order: big-endian + enum: tc-flower-key-ctrl-flags + enum-as-flags: true - name: key-icmpv4-code type: u8 @@ -2749,6 +2763,18 @@ attribute-sets: name: key-spi-mask type: u32 byte-order: big-endian + - + name: key-enc-flags + type: u32 + byte-order: big-endian + enum: tc-flower-key-ctrl-flags + enum-as-flags: true + - + name: key-enc-flags-mask + type: u32 + byte-order: big-endian + enum: tc-flower-key-ctrl-flags + enum-as-flags: true - name: tc-flower-key-enc-opts-attrs attributes: diff --git a/Documentation/netlink/specs/tcp_metrics.yaml b/Documentation/netlink/specs/tcp_metrics.yaml new file mode 100644 index 000000000000..1bd94f43e526 --- /dev/null +++ b/Documentation/netlink/specs/tcp_metrics.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: tcp_metrics + +protocol: genetlink-legacy + +doc: | + Management interface for TCP metrics. + +c-family-name: tcp-metrics-genl-name +c-version-name: tcp-metrics-genl-version +max-by-define: true +kernel-policy: global + +definitions: + - + name: tcp-fastopen-cookie-max + type: const + value: 16 + +attribute-sets: + - + name: tcp-metrics + name-prefix: tcp-metrics-attr- + attributes: + - + name: addr-ipv4 + type: u32 + byte-order: big-endian + display-hint: ipv4 + - + name: addr-ipv6 + type: binary + checks: + min-len: 16 + byte-order: big-endian + display-hint: ipv6 + - + name: age + type: u64 + - + name: tw-tsval + type: u32 + doc: unused + - + name: tw-ts-stamp + type: s32 + doc: unused + - + name: vals + type: nest + nested-attributes: metrics + - + name: fopen-mss + type: u16 + - + name: fopen-syn-drops + type: u16 + - + name: fopen-syn-drop-ts + type: u64 + - + name: fopen-cookie + type: binary + checks: + min-len: tcp-fastopen-cookie-max + - + name: saddr-ipv4 + type: u32 + byte-order: big-endian + display-hint: ipv4 + - + name: saddr-ipv6 + type: binary + checks: + min-len: 16 + byte-order: big-endian + display-hint: ipv6 + - + name: pad + type: pad + + - + name: metrics + # Intentionally don't define the name-prefix, see below. + doc: | + Attributes with metrics. Note that the values here do not match + the TCP_METRIC_* defines in the kernel, because kernel defines + are off-by one (e.g. rtt is defined as enum 0, while netlink carries + attribute type 1). + attributes: + - + name: rtt + type: u32 + doc: | + Round Trip Time (RTT), in msecs with 3 bits fractional + (left-shift by 3 to get the msec value). + - + name: rttvar + type: u32 + doc: | + Round Trip Time VARiance (RTT), in msecs with 2 bits fractional + (left-shift by 2 to get the msec value). + - + name: ssthresh + type: u32 + doc: Slow Start THRESHold. + - + name: cwnd + type: u32 + doc: Congestion Window. + - + name: reodering + type: u32 + doc: Reodering metric. + - + name: rtt-us + type: u32 + doc: | + Round Trip Time (RTT), in usecs, with 3 bits fractional + (left-shift by 3 to get the msec value). + - + name: rttvar-us + type: u32 + doc: | + Round Trip Time (RTT), in usecs, with 2 bits fractional + (left-shift by 3 to get the msec value). + +operations: + list: + - + name: get + doc: Retrieve metrics. + attribute-set: tcp-metrics + + dont-validate: [ strict, dump ] + + do: + request: &sel_attrs + attributes: + - addr-ipv4 + - addr-ipv6 + - saddr-ipv4 + - saddr-ipv6 + reply: &all_attrs + attributes: + - addr-ipv4 + - addr-ipv6 + - saddr-ipv4 + - saddr-ipv6 + - age + - vals + - fopen-mss + - fopen-syn-drops + - fopen-syn-drop-ts + - fopen-cookie + dump: + reply: *all_attrs + + - + name: del + doc: Delete metrics. + attribute-set: tcp-metrics + + dont-validate: [ strict, dump ] + flags: [ admin-perm ] + + do: + request: *sel_attrs diff --git a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst index 199647729251..32ee827a3a2c 100644 --- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst +++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst @@ -339,7 +339,7 @@ Key functions include: a bind of the root DPRC to the DPRC driver The binding for the MC-bus device-tree node can be consulted at -*Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt*. +*Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml*. The sysfs bind/unbind interfaces for the MC-bus can be consulted at *Documentation/ABI/testing/sysfs-bus-fsl-mc*. diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst index fed821ef9b09..3bd72577af9a 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst @@ -189,22 +189,19 @@ the software port. * - `rx[i]_gro_packets` - Number of received packets processed using hardware-accelerated GRO. The - number of hardware GRO offloaded packets received on ring i. + number of hardware GRO offloaded packets received on ring i. Only true GRO + packets are counted: only packets that are in an SKB with a GRO count > 1. - Acceleration * - `rx[i]_gro_bytes` - Number of received bytes processed using hardware-accelerated GRO. The - number of hardware GRO offloaded bytes received on ring i. + number of hardware GRO offloaded bytes received on ring i. Only true GRO + packets are counted: only packets that are in an SKB with a GRO count > 1. - Acceleration * - `rx[i]_gro_skbs` - - The number of receive SKBs constructed while performing - hardware-accelerated GRO. - - Informative - - * - `rx[i]_gro_match_packets` - - Number of received packets processed using hardware-accelerated GRO that - met the flow table match criteria. + - The number of GRO SKBs constructed from hardware-accelerated GRO. Only SKBs + with a GRO count > 1 are counted. - Informative * - `rx[i]_gro_large_hds` @@ -212,6 +209,15 @@ the software port. headers that require additional memory to be allocated. - Informative + * - `rx[i]_hds_nodata_packets` + - Number of header only packets in header/data split mode [#accel]_. + - Informative + + * - `rx[i]_hds_nodata_bytes` + - Number of bytes for header only packets in header/data split mode + [#accel]_. + - Informative + * - `rx[i]_lro_packets` - The number of LRO packets received on ring i [#accel]_. - Acceleration diff --git a/Documentation/networking/devlink/devlink-region.rst b/Documentation/networking/devlink/devlink-region.rst index 9232cd7da301..5d0b68f752c0 100644 --- a/Documentation/networking/devlink/devlink-region.rst +++ b/Documentation/networking/devlink/devlink-region.rst @@ -49,7 +49,7 @@ example usage $ devlink region show [ DEV/REGION ] $ devlink region del DEV/REGION snapshot SNAPSHOT_ID $ devlink region dump DEV/REGION [ snapshot SNAPSHOT_ID ] - $ devlink region read DEV/REGION [ snapshot SNAPSHOT_ID ] address ADDRESS length length + $ devlink region read DEV/REGION [ snapshot SNAPSHOT_ID ] address ADDRESS length LENGTH # Show all of the exposed regions with region sizes: $ devlink region show diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst index 830c04354222..e3972d03cea0 100644 --- a/Documentation/networking/devlink/ice.rst +++ b/Documentation/networking/devlink/ice.rst @@ -11,6 +11,7 @@ Parameters ========== .. list-table:: Generic parameters implemented + :widths: 5 5 90 * - Name - Mode @@ -68,6 +69,30 @@ Parameters To verify that value has been set: $ devlink dev param show pci/0000:16:00.0 name tx_scheduling_layers +.. list-table:: Driver specific parameters implemented + :widths: 5 5 90 + + * - Name + - Mode + - Description + * - ``local_forwarding`` + - runtime + - Controls loopback behavior by tuning scheduler bandwidth. + It impacts all kinds of functions: physical, virtual and + subfunctions. + Supported values are: + + ``enabled`` - loopback traffic is allowed on port + + ``disabled`` - loopback traffic is not allowed on this port + + ``prioritized`` - loopback traffic is prioritized on this port + + Default value of ``local_forwarding`` parameter is ``enabled``. + ``prioritized`` provides ability to adjust loopback traffic rate to increase + one port capacity at cost of the another. User needs to disable + local forwarding on one of the ports in order have increased capacity + on the ``prioritized`` port. Info versions ============= diff --git a/Documentation/networking/devlink/octeontx2.rst b/Documentation/networking/devlink/octeontx2.rst index 610de99b728a..d33a90dd44bf 100644 --- a/Documentation/networking/devlink/octeontx2.rst +++ b/Documentation/networking/devlink/octeontx2.rst @@ -40,3 +40,19 @@ The ``octeontx2 AF`` driver implements the following driver-specific parameters. - runtime - Use to set the quantum which hardware uses for scheduling among transmit queues. Hardware uses weighted DWRR algorithm to schedule among all transmit queues. + +The ``octeontx2 PF`` driver implements the following driver-specific parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``unicast_filter_count`` + - u8 + - runtime + - Set the maximum number of unicast filters that can be programmed for + the device. This can be used to achieve better device resource + utilization, avoiding over consumption of unused MCAM table entries. diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 160bfb0ae8ba..d5f246aceb9f 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -228,6 +228,7 @@ Userspace to kernel: ``ETHTOOL_MSG_PLCA_GET_STATUS`` get PLCA RS status ``ETHTOOL_MSG_MM_GET`` get MAC merge layer state ``ETHTOOL_MSG_MM_SET`` set MAC merge layer parameters + ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT`` flash transceiver module firmware ===================================== ================================= Kernel to userspace: @@ -274,6 +275,7 @@ Kernel to userspace: ``ETHTOOL_MSG_PLCA_GET_STATUS_REPLY`` PLCA RS status ``ETHTOOL_MSG_PLCA_NTF`` PLCA RS parameters ``ETHTOOL_MSG_MM_GET_REPLY`` MAC merge layer status + ``ETHTOOL_MSG_MODULE_FW_FLASH_NTF`` transceiver module flash updates ======================================== ================================= ``GET`` requests are sent by userspace applications to retrieve device @@ -1033,6 +1035,8 @@ Kernel response contents: ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` u32 max aggr size, Tx ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` u32 max aggr packets, Tx ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx + ``ETHTOOL_A_COALESCE_RX_PROFILE`` nested profile of DIM, Rx + ``ETHTOOL_A_COALESCE_TX_PROFILE`` nested profile of DIM, Tx =========================================== ====== ======================= Attributes are only included in reply if their value is not zero or the @@ -1062,6 +1066,10 @@ block should be sent. This feature is mainly of interest for specific USB devices which does not cope well with frequent small-sized URBs transmissions. +``ETHTOOL_A_COALESCE_RX_PROFILE`` and ``ETHTOOL_A_COALESCE_TX_PROFILE`` refer +to DIM parameters, see `Generic Network Dynamic Interrupt Moderation (Net DIM) +<https://www.kernel.org/doc/Documentation/networking/net_dim.rst>`_. + COALESCE_SET ============ @@ -1098,6 +1106,8 @@ Request contents: ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` u32 max aggr size, Tx ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` u32 max aggr packets, Tx ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx + ``ETHTOOL_A_COALESCE_RX_PROFILE`` nested profile of DIM, Rx + ``ETHTOOL_A_COALESCE_TX_PROFILE`` nested profile of DIM, Tx =========================================== ====== ======================= Request is rejected if it attributes declared as unsupported by driver (i.e. @@ -1720,17 +1730,28 @@ Request contents: Kernel response contents: - ====================================== ====== ============================= - ``ETHTOOL_A_PSE_HEADER`` nested reply header - ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL - PSE functions - ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the - PoDL PSE. - ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` u32 Operational state of the PoE - PSE functions. - ``ETHTOOL_A_C33_PSE_PW_D_STATUS`` u32 power detection status of the - PoE PSE. - ====================================== ====== ============================= + ========================================== ====== ============================= + ``ETHTOOL_A_PSE_HEADER`` nested reply header + ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL + PSE functions + ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the + PoDL PSE. + ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` u32 Operational state of the PoE + PSE functions. + ``ETHTOOL_A_C33_PSE_PW_D_STATUS`` u32 power detection status of the + PoE PSE. + ``ETHTOOL_A_C33_PSE_PW_CLASS`` u32 power class of the PoE PSE. + ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` u32 actual power drawn on the + PoE PSE. + ``ETHTOOL_A_C33_PSE_EXT_STATE`` u32 power extended state of the + PoE PSE. + ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` u32 power extended substatus of + the PoE PSE. + ``ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT`` u32 currently configured power + limit of the PoE PSE. + ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested Supported power limit + configuration ranges. + ========================================== ====== ============================= When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies the operational state of the PoDL PSE functions. The operational state of the @@ -1762,6 +1783,46 @@ The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing .. kernel-doc:: include/uapi/linux/ethtool.h :identifiers: ethtool_c33_pse_pw_d_status +When set, the optional ``ETHTOOL_A_C33_PSE_PW_CLASS`` attribute identifies +the power class of the C33 PSE. It depends on the class negotiated between +the PSE and the PD. This option is corresponding to ``IEEE 802.3-2022`` +30.9.1.1.8 aPSEPowerClassification. + +When set, the optional ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` attribute identifies +This option is corresponding to ``IEEE 802.3-2022`` 30.9.1.1.23 aPSEActualPower. +Actual power is reported in mW. + +When set, the optional ``ETHTOOL_A_C33_PSE_EXT_STATE`` attribute identifies +the extended error state of the C33 PSE. Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_c33_pse_ext_state + +When set, the optional ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` attribute identifies +the extended error state of the C33 PSE. Possible values are: +Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_c33_pse_ext_substate_class_num_events + ethtool_c33_pse_ext_substate_error_condition + ethtool_c33_pse_ext_substate_mr_pse_enable + ethtool_c33_pse_ext_substate_option_detect_ted + ethtool_c33_pse_ext_substate_option_vport_lim + ethtool_c33_pse_ext_substate_ovld_detected + ethtool_c33_pse_ext_substate_pd_dll_power_type + ethtool_c33_pse_ext_substate_power_not_available + ethtool_c33_pse_ext_substate_short_detected + +When set, the optional ``ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT`` attribute +identifies the C33 PSE power limit in mW. + +When set the optional ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested attribute +identifies the C33 PSE power limit ranges through +``ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MIN`` and +``ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MAX``. +If the controller works with fixed classes, the min and max values will be +equal. + PSE_SET ======= @@ -1773,6 +1834,8 @@ Request contents: ``ETHTOOL_A_PSE_HEADER`` nested request header ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` u32 Control PSE Admin state + ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` u32 Control PoE PSE available + power limit ====================================== ====== ============================= When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used @@ -1783,6 +1846,18 @@ to control PoDL PSE Admin functions. This option is implementing The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing ``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl. +When set, the optional ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` attribute is +used to control the available power value limit for C33 PSE in milliwatts. +This attribute corresponds to the `pse_available_power` variable described in +``IEEE 802.3-2022`` 33.2.4.4 Variables and `pse_avail_pwr` in 145.2.5.4 +Variables, which are described in power classes. + +It was decided to use milliwatts for this interface to unify it with other +power monitoring interfaces, which also use milliwatts, and to align with +various existing products that document power consumption in watts rather than +classes. If power limit configuration based on classes is needed, the +conversion can be done in user space, for example by ethtool. + RSS_GET ======= @@ -1800,6 +1875,7 @@ Kernel response contents: ===================================== ====== ========================== ``ETHTOOL_A_RSS_HEADER`` nested reply header + ``ETHTOOL_A_RSS_CONTEXT`` u32 context number ``ETHTOOL_A_RSS_HFUNC`` u32 RSS hash func ``ETHTOOL_A_RSS_INDIR`` binary Indir table bytes ``ETHTOOL_A_RSS_HKEY`` binary Hash key bytes @@ -2033,6 +2109,73 @@ The attributes are propagated to the driver through the following structure: .. kernel-doc:: include/linux/ethtool.h :identifiers: ethtool_mm_cfg +MODULE_FW_FLASH_ACT +=================== + +Flashes transceiver module firmware. + +Request contents: + + ======================================= ====== =========================== + ``ETHTOOL_A_MODULE_FW_FLASH_HEADER`` nested request header + ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` string firmware image file name + ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` u32 transceiver module password + ======================================= ====== =========================== + +The firmware update process consists of three logical steps: + +1. Downloading a firmware image to the transceiver module and validating it. +2. Running the firmware image. +3. Committing the firmware image so that it is run upon reset. + +When flash command is given, those three steps are taken in that order. + +This message merely schedules the update process and returns immediately +without blocking. The process then runs asynchronously. +Since it can take several minutes to complete, during the update process +notifications are emitted from the kernel to user space updating it about +the status and progress. + +The ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` attribute encodes the firmware +image file name. The firmware image is downloaded to the transceiver module, +validated, run and committed. + +The optional ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` attribute encodes a password +that might be required as part of the transceiver module firmware update +process. + +The firmware update process can take several minutes to complete. Therefore, +during the update process notifications are emitted from the kernel to user +space updating it about the status and progress. + + + +Notification contents: + + +---------------------------------------------------+--------+----------------+ + | ``ETHTOOL_A_MODULE_FW_FLASH_HEADER`` | nested | reply header | + +---------------------------------------------------+--------+----------------+ + | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` | u32 | status | + +---------------------------------------------------+--------+----------------+ + | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` | string | status message | + +---------------------------------------------------+--------+----------------+ + | ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` | uint | progress | + +---------------------------------------------------+--------+----------------+ + | ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL`` | uint | total | + +---------------------------------------------------+--------+----------------+ + +The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` attribute encodes the current status +of the firmware update process. Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_module_fw_flash_status + +The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` attribute encodes a status message +string. + +The ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` and ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL`` +attributes encode the completed and total amount of work, respectively. + Request translation =================== @@ -2139,4 +2282,5 @@ are netlink only. n/a ``ETHTOOL_MSG_PLCA_GET_STATUS`` n/a ``ETHTOOL_MSG_MM_GET`` n/a ``ETHTOOL_MSG_MM_SET`` + n/a ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT`` =================================== ===================================== diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 7664c0bfe461..d1af04b952f8 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -19,6 +19,7 @@ Contents: caif/index ethtool-netlink ieee802154 + iso15765-2 j1939 kapi msg_zerocopy @@ -72,6 +73,7 @@ Contents: mac80211-injection mctp mpls-sysctl + mptcp mptcp-sysctl multiqueue multi-pf-netdev @@ -104,6 +106,7 @@ Contents: seg6-sysctl skbuff smc-sysctl + sriov statistics strparser switchdev diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index bd50df6a5a42..3616389c8c2d 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -131,6 +131,20 @@ fib_multipath_hash_fields - UNSIGNED INTEGER Default: 0x0007 (source IP, destination IP and IP protocol) +fib_multipath_hash_seed - UNSIGNED INTEGER + The seed value used when calculating hash for multipath routes. Applies + to both IPv4 and IPv6 datapath. Only present for kernels built with + CONFIG_IP_ROUTE_MULTIPATH enabled. + + When set to 0, the seed value used for multipath routing defaults to an + internal random-generated one. + + The actual hashing algorithm is not specified -- there is no guarantee + that a next hop distribution effected by a given seed will keep stable + across kernel versions. + + Default: 0 (random) + fib_sync_mem - UNSIGNED INTEGER Amount of dirty memory from fib entries that can be backlogged before synchronize_rcu is forced. @@ -1196,6 +1210,19 @@ tcp_pingpong_thresh - INTEGER Default: 1 +tcp_rto_min_us - INTEGER + Minimal TCP retransmission timeout (in microseconds). Note that the + rto_min route option has the highest precedence for configuring this + setting, followed by the TCP_BPF_RTO_MIN socket option, followed by + this tcp_rto_min_us sysctl. + + The recommended practice is to use a value less or equal to 200000 + microseconds. + + Possible Values: 1 - INT_MAX + + Default: 200000 + UDP variables ============= diff --git a/Documentation/networking/iso15765-2.rst b/Documentation/networking/iso15765-2.rst new file mode 100644 index 000000000000..0e9d96074178 --- /dev/null +++ b/Documentation/networking/iso15765-2.rst @@ -0,0 +1,386 @@ +.. SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) + +==================== +ISO 15765-2 (ISO-TP) +==================== + +Overview +======== + +ISO 15765-2, also known as ISO-TP, is a transport protocol specifically defined +for diagnostic communication on CAN. It is widely used in the automotive +industry, for example as the transport protocol for UDSonCAN (ISO 14229-3) or +emission-related diagnostic services (ISO 15031-5). + +ISO-TP can be used both on CAN CC (aka Classical CAN) and CAN FD (CAN with +Flexible Datarate) based networks. It is also designed to be compatible with a +CAN network using SAE J1939 as data link layer (however, this is not a +requirement). + +Specifications used +------------------- + +* ISO 15765-2:2024 : Road vehicles - Diagnostic communication over Controller + Area Network (DoCAN). Part 2: Transport protocol and network layer services. + +Addressing +---------- + +In its simplest form, ISO-TP is based on two kinds of addressing modes for the +nodes connected to the same network: + +* physical addressing is implemented by two node-specific addresses and is used + in 1-to-1 communication. + +* functional addressing is implemented by one node-specific address and is used + in 1-to-N communication. + +Three different addressing formats can be employed: + +* "normal" : each address is represented simply by a CAN ID. + +* "extended": each address is represented by a CAN ID plus the first byte of + the CAN payload; both the CAN ID and the byte inside the payload shall be + different between two addresses. + +* "mixed": each address is represented by a CAN ID plus the first byte of + the CAN payload; the CAN ID is different between two addresses, but the + additional byte is the same. + +Transport protocol and associated frame types +--------------------------------------------- + +When transmitting data using the ISO-TP protocol, the payload can either fit +inside one single CAN message or not, also considering the overhead the protocol +is generating and the optional extended addressing. In the first case, the data +is transmitted at once using a so-called Single Frame (SF). In the second case, +ISO-TP defines a multi-frame protocol, in which the sender provides (through a +First Frame - FF) the PDU length which is to be transmitted and also asks for a +Flow Control (FC) frame, which provides the maximum supported size of a macro +data block (``blocksize``) and the minimum time between the single CAN messages +composing such block (``stmin``). Once this information has been received, the +sender starts to send frames containing fragments of the data payload (called +Consecutive Frames - CF), stopping after every ``blocksize``-sized block to wait +confirmation from the receiver which should then send another Flow Control +frame to inform the sender about its availability to receive more data. + +How to Use ISO-TP +================= + +As with others CAN protocols, the ISO-TP stack support is built into the +Linux network subsystem for the CAN bus, aka. Linux-CAN or SocketCAN, and +thus follows the same socket API. + +Creation and basic usage of an ISO-TP socket +-------------------------------------------- + +To use the ISO-TP stack, ``#include <linux/can/isotp.h>`` shall be used. A +socket can then be created using the ``PF_CAN`` protocol family, the +``SOCK_DGRAM`` type (as the underlying protocol is datagram-based by design) +and the ``CAN_ISOTP`` protocol: + +.. code-block:: C + + s = socket(PF_CAN, SOCK_DGRAM, CAN_ISOTP); + +After the socket has been successfully created, ``bind(2)`` shall be called to +bind the socket to the desired CAN interface; to do so: + +* a TX CAN ID shall be specified as part of the sockaddr supplied to the call + itself. + +* a RX CAN ID shall also be specified, unless broadcast flags have been set + through socket option (explained below). + +Once bound to an interface, the socket can be read from and written to using +the usual ``read(2)`` and ``write(2)`` system calls, as well as ``send(2)``, +``sendmsg(2)``, ``recv(2)`` and ``recvmsg(2)``. +Unlike the CAN_RAW socket API, only the ISO-TP data field (the actual payload) +is sent and received by the userspace application using these calls. The address +information and the protocol information are automatically filled by the ISO-TP +stack using the configuration supplied during socket creation. In the same way, +the stack will use the transport mechanism when required (i.e., when the size +of the data payload exceeds the MTU of the underlying CAN bus). + +The sockaddr structure used for SocketCAN has extensions for use with ISO-TP, +as specified below: + +.. code-block:: C + + struct sockaddr_can { + sa_family_t can_family; + int can_ifindex; + union { + struct { canid_t rx_id, tx_id; } tp; + ... + } can_addr; + } + +* ``can_family`` and ``can_ifindex`` serve the same purpose as for other + SocketCAN sockets. + +* ``can_addr.tp.rx_id`` specifies the receive (RX) CAN ID and will be used as + a RX filter. + +* ``can_addr.tp.tx_id`` specifies the transmit (TX) CAN ID + +ISO-TP socket options +--------------------- + +When creating an ISO-TP socket, reasonable defaults are set. Some options can +be modified with ``setsockopt(2)`` and/or read back with ``getsockopt(2)``. + +General options +~~~~~~~~~~~~~~~ + +General socket options can be passed using the ``CAN_ISOTP_OPTS`` optname: + +.. code-block:: C + + struct can_isotp_options opts; + ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_OPTS, &opts, sizeof(opts)) + +where the ``can_isotp_options`` structure has the following contents: + +.. code-block:: C + + struct can_isotp_options { + u32 flags; + u32 frame_txtime; + u8 ext_address; + u8 txpad_content; + u8 rxpad_content; + u8 rx_ext_address; + }; + +* ``flags``: modifiers to be applied to the default behaviour of the ISO-TP + stack. Following flags are available: + + * ``CAN_ISOTP_LISTEN_MODE``: listen only (do not send FC frames); normally + used as a testing feature. + + * ``CAN_ISOTP_EXTEND_ADDR``: use the byte specified in ``ext_address`` as an + additional address component. This enables the "mixed" addressing format if + used alone, or the "extended" addressing format if used in conjunction with + ``CAN_ISOTP_RX_EXT_ADDR``. + + * ``CAN_ISOTP_TX_PADDING``: enable padding for transmitted frames, using + ``txpad_content`` as value for the padding bytes. + + * ``CAN_ISOTP_RX_PADDING``: enable padding for the received frames, using + ``rxpad_content`` as value for the padding bytes. + + * ``CAN_ISOTP_CHK_PAD_LEN``: check for correct padding length on the received + frames. + + * ``CAN_ISOTP_CHK_PAD_DATA``: check padding bytes on the received frames + against ``rxpad_content``; if ``CAN_ISOTP_RX_PADDING`` is not specified, + this flag is ignored. + + * ``CAN_ISOTP_HALF_DUPLEX``: force ISO-TP socket in half duplex mode + (that is, transport mechanism can only be incoming or outgoing at the same + time, not both). + + * ``CAN_ISOTP_FORCE_TXSTMIN``: ignore stmin from received FC; normally + used as a testing feature. + + * ``CAN_ISOTP_FORCE_RXSTMIN``: ignore CFs depending on rx stmin; normally + used as a testing feature. + + * ``CAN_ISOTP_RX_EXT_ADDR``: use ``rx_ext_address`` instead of ``ext_address`` + as extended addressing byte on the reception path. If used in conjunction + with ``CAN_ISOTP_EXTEND_ADDR``, this flag effectively enables the "extended" + addressing format. + + * ``CAN_ISOTP_WAIT_TX_DONE``: wait until the frame is sent before returning + from ``write(2)`` and ``send(2)`` calls (i.e., blocking write operations). + + * ``CAN_ISOTP_SF_BROADCAST``: use 1-to-N functional addressing (cannot be + specified alongside ``CAN_ISOTP_CF_BROADCAST``). + + * ``CAN_ISOTP_CF_BROADCAST``: use 1-to-N transmission without flow control + (cannot be specified alongside ``CAN_ISOTP_SF_BROADCAST``). + NOTE: this is not covered by the ISO 15765-2 standard. + + * ``CAN_ISOTP_DYN_FC_PARMS``: enable dynamic update of flow control + parameters. + +* ``frame_txtime``: frame transmission time (defined as N_As/N_Ar inside the + ISO standard); if ``0``, the default (or the last set value) is used. + To set the transmission time to ``0``, the ``CAN_ISOTP_FRAME_TXTIME_ZERO`` + macro (equal to 0xFFFFFFFF) shall be used. + +* ``ext_address``: extended addressing byte, used if the + ``CAN_ISOTP_EXTEND_ADDR`` flag is specified. + +* ``txpad_content``: byte used as padding value for transmitted frames. + +* ``rxpad_content``: byte used as padding value for received frames. + +* ``rx_ext_address``: extended addressing byte for the reception path, used if + the ``CAN_ISOTP_RX_EXT_ADDR`` flag is specified. + +Flow Control options +~~~~~~~~~~~~~~~~~~~~ + +Flow Control (FC) options can be passed using the ``CAN_ISOTP_RECV_FC`` optname +to provide the communication parameters for receiving ISO-TP PDUs. + +.. code-block:: C + + struct can_isotp_fc_options fc_opts; + ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_RECV_FC, &fc_opts, sizeof(fc_opts)); + +where the ``can_isotp_fc_options`` structure has the following contents: + +.. code-block:: C + + struct can_isotp_options { + u8 bs; + u8 stmin; + u8 wftmax; + }; + +* ``bs``: blocksize provided in flow control frames. + +* ``stmin``: minimum separation time provided in flow control frames; can + have the following values (others are reserved): + + * 0x00 - 0x7F : 0 - 127 ms + + * 0xF1 - 0xF9 : 100 us - 900 us + +* ``wftmax``: maximum number of wait frames provided in flow control frames. + +Link Layer options +~~~~~~~~~~~~~~~~~~ + +Link Layer (LL) options can be passed using the ``CAN_ISOTP_LL_OPTS`` optname: + +.. code-block:: C + + struct can_isotp_ll_options ll_opts; + ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_LL_OPTS, &ll_opts, sizeof(ll_opts)); + +where the ``can_isotp_ll_options`` structure has the following contents: + +.. code-block:: C + + struct can_isotp_ll_options { + u8 mtu; + u8 tx_dl; + u8 tx_flags; + }; + +* ``mtu``: generated and accepted CAN frame type, can be equal to ``CAN_MTU`` + for classical CAN frames or ``CANFD_MTU`` for CAN FD frames. + +* ``tx_dl``: maximum payload length for transmitted frames, can have one value + among: 8, 12, 16, 20, 24, 32, 48, 64. Values above 8 only apply to CAN FD + traffic (i.e.: ``mtu = CANFD_MTU``). + +* ``tx_flags``: flags set into ``struct canfd_frame.flags`` at frame creation. + Only applies to CAN FD traffic (i.e.: ``mtu = CANFD_MTU``). + +Transmission stmin +~~~~~~~~~~~~~~~~~~ + +The transmission minimum separation time (stmin) can be forced using the +``CAN_ISOTP_TX_STMIN`` optname and providing an stmin value in microseconds as +a 32bit unsigned integer; this will overwrite the value sent by the receiver in +flow control frames: + +.. code-block:: C + + uint32_t stmin; + ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_TX_STMIN, &stmin, sizeof(stmin)); + +Reception stmin +~~~~~~~~~~~~~~~ + +The reception minimum separation time (stmin) can be forced using the +``CAN_ISOTP_RX_STMIN`` optname and providing an stmin value in microseconds as +a 32bit unsigned integer; received Consecutive Frames (CF) which timestamps +differ less than this value will be ignored: + +.. code-block:: C + + uint32_t stmin; + ret = setsockopt(s, SOL_CAN_ISOTP, CAN_ISOTP_RX_STMIN, &stmin, sizeof(stmin)); + +Multi-frame transport support +----------------------------- + +The ISO-TP stack contained inside the Linux kernel supports the multi-frame +transport mechanism defined by the standard, with the following constraints: + +* the maximum size of a PDU is defined by a module parameter, with an hard + limit imposed at build time. + +* when a transmission is in progress, subsequent calls to ``write(2)`` will + block, while calls to ``send(2)`` will either block or fail depending on the + presence of the ``MSG_DONTWAIT`` flag. + +* no support is present for sending "wait frames": whether a PDU can be fully + received or not is decided when the First Frame is received. + +Errors +------ + +Following errors are reported to userspace: + +RX path errors +~~~~~~~~~~~~~~ + +============ =============================================================== +-ETIMEDOUT timeout of data reception +-EILSEQ sequence number mismatch during a multi-frame reception +-EBADMSG data reception with wrong padding +============ =============================================================== + +TX path errors +~~~~~~~~~~~~~~ + +========== ================================================================= +-ECOMM flow control reception timeout +-EMSGSIZE flow control reception overflow +-EBADMSG flow control reception with wrong layout/padding +========== ================================================================= + +Examples +======== + +Basic node example +------------------ + +Following example implements a node using "normal" physical addressing, with +RX ID equal to 0x18DAF142 and a TX ID equal to 0x18DA42F1. All options are left +to their default. + +.. code-block:: C + + int s; + struct sockaddr_can addr; + int ret; + + s = socket(PF_CAN, SOCK_DGRAM, CAN_ISOTP); + if (s < 0) + exit(1); + + addr.can_family = AF_CAN; + addr.can_ifindex = if_nametoindex("can0"); + addr.tp.tx_id = 0x18DA42F1 | CAN_EFF_FLAG; + addr.tp.rx_id = 0x18DAF142 | CAN_EFF_FLAG; + + ret = bind(s, (struct sockaddr *)&addr, sizeof(addr)); + if (ret < 0) + exit(1); + + /* Data can now be received using read(s, ...) and sent using write(s, ...) */ + +Additional examples +------------------- + +More complete (and complex) examples can be found inside the ``isotp*`` userland +tools, distributed as part of the ``can-utils`` utilities at: +https://github.com/linux-can/can-utils diff --git a/Documentation/networking/mptcp-sysctl.rst b/Documentation/networking/mptcp-sysctl.rst index 69975ce25a02..fd514bba8c43 100644 --- a/Documentation/networking/mptcp-sysctl.rst +++ b/Documentation/networking/mptcp-sysctl.rst @@ -7,14 +7,6 @@ MPTCP Sysfs variables /proc/sys/net/mptcp/* Variables =============================== -enabled - BOOLEAN - Control whether MPTCP sockets can be created. - - MPTCP sockets can be created if the value is 1. This is a - per-namespace sysctl. - - Default: 1 (enabled) - add_addr_timeout - INTEGER (seconds) Set the timeout after which an ADD_ADDR control message will be resent to an MPTCP peer that has not acknowledged a previous @@ -25,16 +17,22 @@ add_addr_timeout - INTEGER (seconds) Default: 120 -close_timeout - INTEGER (seconds) - Set the make-after-break timeout: in absence of any close or - shutdown syscall, MPTCP sockets will maintain the status - unchanged for such time, after the last subflow removal, before - moving to TCP_CLOSE. +allow_join_initial_addr_port - BOOLEAN + Allow peers to send join requests to the IP address and port number used + by the initial subflow if the value is 1. This controls a flag that is + sent to the peer at connection time, and whether such join requests are + accepted or denied. - The default value matches TCP_TIMEWAIT_LEN. This is a per-namespace - sysctl. + Joins to addresses advertised with ADD_ADDR are not affected by this + value. - Default: 60 + This is a per-namespace sysctl. + + Default: 1 + +available_schedulers - STRING + Shows the available schedulers choices that are registered. More packet + schedulers may be available, but not loaded. checksum_enabled - BOOLEAN Control whether DSS checksum can be enabled. @@ -44,18 +42,24 @@ checksum_enabled - BOOLEAN Default: 0 -allow_join_initial_addr_port - BOOLEAN - Allow peers to send join requests to the IP address and port number used - by the initial subflow if the value is 1. This controls a flag that is - sent to the peer at connection time, and whether such join requests are - accepted or denied. +close_timeout - INTEGER (seconds) + Set the make-after-break timeout: in absence of any close or + shutdown syscall, MPTCP sockets will maintain the status + unchanged for such time, after the last subflow removal, before + moving to TCP_CLOSE. - Joins to addresses advertised with ADD_ADDR are not affected by this - value. + The default value matches TCP_TIMEWAIT_LEN. This is a per-namespace + sysctl. - This is a per-namespace sysctl. + Default: 60 - Default: 1 +enabled - BOOLEAN + Control whether MPTCP sockets can be created. + + MPTCP sockets can be created if the value is 1. This is a + per-namespace sysctl. + + Default: 1 (enabled) pm_type - INTEGER Set the default path manager type to use for each new MPTCP @@ -74,6 +78,14 @@ pm_type - INTEGER Default: 0 +scheduler - STRING + Select the scheduler of your choice. + + Support for selection of different schedulers. This is a per-namespace + sysctl. + + Default: "default" + stale_loss_cnt - INTEGER The number of MPTCP-level retransmission intervals with no traffic and pending outstanding data on a given subflow required to declare it stale. @@ -85,11 +97,3 @@ stale_loss_cnt - INTEGER This is a per-namespace sysctl. Default: 4 - -scheduler - STRING - Select the scheduler of your choice. - - Support for selection of different schedulers. This is a per-namespace - sysctl. - - Default: "default" diff --git a/Documentation/networking/mptcp.rst b/Documentation/networking/mptcp.rst new file mode 100644 index 000000000000..17f2bab61164 --- /dev/null +++ b/Documentation/networking/mptcp.rst @@ -0,0 +1,156 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +Multipath TCP (MPTCP) +===================== + +Introduction +============ + +Multipath TCP or MPTCP is an extension to the standard TCP and is described in +`RFC 8684 (MPTCPv1) <https://www.rfc-editor.org/rfc/rfc8684.html>`_. It allows a +device to make use of multiple interfaces at once to send and receive TCP +packets over a single MPTCP connection. MPTCP can aggregate the bandwidth of +multiple interfaces or prefer the one with the lowest latency. It also allows a +fail-over if one path is down, and the traffic is seamlessly reinjected on other +paths. + +For more details about Multipath TCP in the Linux kernel, please see the +official website: `mptcp.dev <https://www.mptcp.dev>`_. + + +Use cases +========= + +Thanks to MPTCP, being able to use multiple paths in parallel or simultaneously +brings new use-cases, compared to TCP: + +- Seamless handovers: switching from one path to another while preserving + established connections, e.g. to be used in mobility use-cases, like on + smartphones. +- Best network selection: using the "best" available path depending on some + conditions, e.g. latency, losses, cost, bandwidth, etc. +- Network aggregation: using multiple paths at the same time to have a higher + throughput, e.g. to combine fixed and mobile networks to send files faster. + + +Concepts +======== + +Technically, when a new socket is created with the ``IPPROTO_MPTCP`` protocol +(Linux-specific), a *subflow* (or *path*) is created. This *subflow* consists of +a regular TCP connection that is used to transmit data through one interface. +Additional *subflows* can be negotiated later between the hosts. For the remote +host to be able to detect the use of MPTCP, a new field is added to the TCP +*option* field of the underlying TCP *subflow*. This field contains, amongst +other things, a ``MP_CAPABLE`` option that tells the other host to use MPTCP if +it is supported. If the remote host or any middlebox in between does not support +it, the returned ``SYN+ACK`` packet will not contain MPTCP options in the TCP +*option* field. In that case, the connection will be "downgraded" to plain TCP, +and it will continue with a single path. + +This behavior is made possible by two internal components: the path manager, and +the packet scheduler. + +Path Manager +------------ + +The Path Manager is in charge of *subflows*, from creation to deletion, and also +address announcements. Typically, it is the client side that initiates subflows, +and the server side that announces additional addresses via the ``ADD_ADDR`` and +``REMOVE_ADDR`` options. + +Path managers are controlled by the ``net.mptcp.pm_type`` sysctl knob -- see +mptcp-sysctl.rst. There are two types: the in-kernel one (type ``0``) where the +same rules are applied for all the connections (see: ``ip mptcp``) ; and the +userspace one (type ``1``), controlled by a userspace daemon (i.e. `mptcpd +<https://mptcpd.mptcp.dev/>`_) where different rules can be applied for each +connection. The path managers can be controlled via a Netlink API; see +netlink_spec/mptcp_pm.rst. + +To be able to use multiple IP addresses on a host to create multiple *subflows* +(paths), the default in-kernel MPTCP path-manager needs to know which IP +addresses can be used. This can be configured with ``ip mptcp endpoint`` for +example. + +Packet Scheduler +---------------- + +The Packet Scheduler is in charge of selecting which available *subflow(s)* to +use to send the next data packet. It can decide to maximize the use of the +available bandwidth, only to pick the path with the lower latency, or any other +policy depending on the configuration. + +Packet schedulers are controlled by the ``net.mptcp.scheduler`` sysctl knob -- +see mptcp-sysctl.rst. + + +Sockets API +=========== + +Creating MPTCP sockets +---------------------- + +On Linux, MPTCP can be used by selecting MPTCP instead of TCP when creating the +``socket``: + +.. code-block:: C + + int sd = socket(AF_INET(6), SOCK_STREAM, IPPROTO_MPTCP); + +Note that ``IPPROTO_MPTCP`` is defined as ``262``. + +If MPTCP is not supported, ``errno`` will be set to: + +- ``EINVAL``: (*Invalid argument*): MPTCP is not available, on kernels < 5.6. +- ``EPROTONOSUPPORT`` (*Protocol not supported*): MPTCP has not been compiled, + on kernels >= v5.6. +- ``ENOPROTOOPT`` (*Protocol not available*): MPTCP has been disabled using + ``net.mptcp.enabled`` sysctl knob; see mptcp-sysctl.rst. + +MPTCP is then opt-in: applications need to explicitly request it. Note that +applications can be forced to use MPTCP with different techniques, e.g. +``LD_PRELOAD`` (see ``mptcpize``), eBPF (see ``mptcpify``), SystemTAP, +``GODEBUG`` (``GODEBUG=multipathtcp=1``), etc. + +Switching to ``IPPROTO_MPTCP`` instead of ``IPPROTO_TCP`` should be as +transparent as possible for the userspace applications. + +Socket options +-------------- + +MPTCP supports most socket options handled by TCP. It is possible some less +common options are not supported, but contributions are welcome. + +Generally, the same value is propagated to all subflows, including the ones +created after the calls to ``setsockopt()``. eBPF can be used to set different +values per subflow. + +There are some MPTCP specific socket options at the ``SOL_MPTCP`` (284) level to +retrieve info. They fill the ``optval`` buffer of the ``getsockopt()`` system +call: + +- ``MPTCP_INFO``: Uses ``struct mptcp_info``. +- ``MPTCP_TCPINFO``: Uses ``struct mptcp_subflow_data``, followed by an array of + ``struct tcp_info``. +- ``MPTCP_SUBFLOW_ADDRS``: Uses ``struct mptcp_subflow_data``, followed by an + array of ``mptcp_subflow_addrs``. +- ``MPTCP_FULL_INFO``: Uses ``struct mptcp_full_info``, with one pointer to an + array of ``struct mptcp_subflow_info`` (including the + ``struct mptcp_subflow_addrs``), and one pointer to an array of + ``struct tcp_info``, followed by the content of ``struct mptcp_info``. + +Note that at the TCP level, ``TCP_IS_MPTCP`` socket option can be used to know +if MPTCP is currently being used: the value will be set to 1 if it is. + + +Design choices +============== + +A new socket type has been added for MPTCP for the userspace-facing socket. The +kernel is in charge of creating subflow sockets: they are TCP sockets where the +behavior is modified using TCP-ULP. + +MPTCP listen sockets will create "plain" *accepted* TCP sockets if the +connection request from the client didn't ask for MPTCP, making the performance +impact minimal when MPTCP is enabled by default. diff --git a/Documentation/networking/net_dim.rst b/Documentation/networking/net_dim.rst index 3bed9fd95336..8908fd7b0a8d 100644 --- a/Documentation/networking/net_dim.rst +++ b/Documentation/networking/net_dim.rst @@ -169,6 +169,48 @@ usage is not complete but it should make the outline of the usage clear. ... } + +Tuning DIM +========== + +Net DIM serves a range of network devices and delivers excellent acceleration +benefits. Yet, it has been observed that some preset configurations of DIM may +not align seamlessly with the varying specifications of network devices, and +this discrepancy has been identified as a factor to the suboptimal performance +outcomes of DIM-enabled network devices, related to a mismatch in profiles. + +To address this issue, Net DIM introduces a per-device control to modify and +access a device's ``rx-profile`` and ``tx-profile`` parameters: +Assume that the target network device is named ethx, and ethx only declares +support for RX profile setting and supports modification of ``usec`` field +and ``pkts`` field (See the data structure: +:c:type:`struct dim_cq_moder <dim_cq_moder>`). + +You can use ethtool to modify the current RX DIM profile where all +values are 64:: + + $ ethtool -C ethx rx-profile 1,1,n_2,2,n_3,n,n_n,4,n_n,n,n + +``n`` means do not modify this field, and ``_`` separates structure +elements of the profile array. + +Querying the current profiles using:: + + $ ethtool -c ethx + ... + rx-profile: + {.usec = 1, .pkts = 1, .comps = n/a,}, + {.usec = 2, .pkts = 2, .comps = n/a,}, + {.usec = 3, .pkts = 64, .comps = n/a,}, + {.usec = 64, .pkts = 4, .comps = n/a,}, + {.usec = 64, .pkts = 64, .comps = n/a,} + tx-profile: n/a + +If the network device does not support specific fields of DIM profiles, +the corresponding ``n/a`` will display. If the ``n/a`` field is being +modified, error messages will be reported. + + Dynamic Interrupt Moderation (DIM) library API ============================================== diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index 1283240d7620..f64641417c54 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -327,6 +327,12 @@ Some of the interface modes are described below: This is the Penta SGMII mode, it is similar to QSGMII but it combines 5 SGMII lines into a single link compared to 4 on QSGMII. +``PHY_INTERFACE_MODE_10G_QXGMII`` + Represents the 10G-QXGMII PHY-MAC interface as defined by the Cisco USXGMII + Multiport Copper Interface document. It supports 4 ports over a 10.3125 GHz + SerDes lane, each port having speeds of 2.5G / 1G / 100M / 10M achieved + through symbol replication. The PCS expects the standard USXGMII code word. + Pause frames / flow control =========================== diff --git a/Documentation/networking/sriov.rst b/Documentation/networking/sriov.rst new file mode 100644 index 000000000000..5deb4ff3154f --- /dev/null +++ b/Documentation/networking/sriov.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +NIC SR-IOV APIs +=============== + +Modern NICs are strongly encouraged to focus on implementing the ``switchdev`` +model (see :ref:`switchdev`) to configure forwarding and security of SR-IOV +functionality. + +Legacy API +========== + +The old SR-IOV API is implemented in ``rtnetlink`` Netlink family as part of +the ``RTM_GETLINK`` and ``RTM_SETLINK`` commands. On the driver side +it consists of a number of ``ndo_set_vf_*`` and ``ndo_get_vf_*`` callbacks. + +Since the legacy APIs do not integrate well with the rest of the stack +the API is considered frozen; no new functionality or extensions +will be accepted. New drivers should not implement the uncommon callbacks; +namely the following callbacks are off limits: + + - ``ndo_get_vf_port`` + - ``ndo_set_vf_port`` + - ``ndo_set_vf_rss_query_en`` diff --git a/Documentation/networking/tcp_ao.rst b/Documentation/networking/tcp_ao.rst index 8a58321acce7..e96e62d1dab3 100644 --- a/Documentation/networking/tcp_ao.rst +++ b/Documentation/networking/tcp_ao.rst @@ -337,6 +337,15 @@ TCP-AO per-socket counters are also duplicated with per-netns counters, exposed with SNMP. Those are ``TCPAOGood``, ``TCPAOBad``, ``TCPAOKeyNotFound``, ``TCPAORequired`` and ``TCPAODroppedIcmps``. +For monitoring purposes, there are following TCP-AO trace events: +``tcp_hash_bad_header``, ``tcp_hash_ao_required``, ``tcp_ao_handshake_failure``, +``tcp_ao_wrong_maclen``, ``tcp_ao_wrong_maclen``, ``tcp_ao_key_not_found``, +``tcp_ao_rnext_request``, ``tcp_ao_synack_no_key``, ``tcp_ao_snd_sne_update``, +``tcp_ao_rcv_sne_update``. It's possible to separately enable any of them and +one can filter them by net-namespace, 4-tuple, family, L3 index, and TCP header +flags. If a segment has a TCP-AO header, the filters may also include +keyid, rnext, and maclen. SNE updates include the rolled-over numbers. + RFC 5925 very permissively specifies how TCP port matching can be done for MKTs:: diff --git a/Documentation/networking/xsk-tx-metadata.rst b/Documentation/networking/xsk-tx-metadata.rst index bd033fe95cca..e76b0cfc32f7 100644 --- a/Documentation/networking/xsk-tx-metadata.rst +++ b/Documentation/networking/xsk-tx-metadata.rst @@ -11,12 +11,16 @@ metadata on the receive side. General Design ============== -The headroom for the metadata is reserved via ``tx_metadata_len`` in -``struct xdp_umem_reg``. The metadata length is therefore the same for -every socket that shares the same umem. The metadata layout is a fixed UAPI, -refer to ``union xsk_tx_metadata`` in ``include/uapi/linux/if_xdp.h``. -Thus, generally, the ``tx_metadata_len`` field above should contain -``sizeof(union xsk_tx_metadata)``. +The headroom for the metadata is reserved via ``tx_metadata_len`` and +``XDP_UMEM_TX_METADATA_LEN`` flag in ``struct xdp_umem_reg``. The metadata +length is therefore the same for every socket that shares the same umem. +The metadata layout is a fixed UAPI, refer to ``union xsk_tx_metadata`` in +``include/uapi/linux/if_xdp.h``. Thus, generally, the ``tx_metadata_len`` +field above should contain ``sizeof(union xsk_tx_metadata)``. + +Note that in the original implementation the ``XDP_UMEM_TX_METADATA_LEN`` +flag was not required. Applications might attempt to create a umem +with a flag first and if it fails, do another attempt without a flag. The headroom and the metadata itself should be located right before ``xdp_desc->addr`` in the umem frame. Within a frame, the metadata diff --git a/Documentation/power/regulator/consumer.rst b/Documentation/power/regulator/consumer.rst index 85c2bf5ac07e..9d2416f63f6e 100644 --- a/Documentation/power/regulator/consumer.rst +++ b/Documentation/power/regulator/consumer.rst @@ -227,3 +227,9 @@ directly written to the voltage selector register, use:: int regulator_list_hardware_vsel(struct regulator *regulator, unsigned selector); + +To access the hardware for enabling/disabling the regulator, consumers must +use regulator_get_exclusive(), as it can't work if there's more than one +consumer. To enable/disable regulator use:: + + int regulator_hardware_enable(struct regulator *regulator, bool enable); diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst index 613a01da4717..ef3b116492df 100644 --- a/Documentation/process/2.Process.rst +++ b/Documentation/process/2.Process.rst @@ -392,13 +392,13 @@ represent a potential hazard to developers, who risk getting buried under a load of electronic mail, running afoul of the conventions used on the Linux lists, or both. -Most kernel mailing lists are run on vger.kernel.org; the master list can +Most kernel mailing lists are hosted at kernel.org; the master list can be found at: - http://vger.kernel.org/vger-lists.html + https://subspace.kernel.org -There are lists hosted elsewhere, though; a number of them are at -redhat.com/mailman/listinfo. +There are lists hosted elsewhere; please check the MAINTAINERS file for +the list relevant for any particular subsystem. The core mailing list for kernel development is, of course, linux-kernel. This list is an intimidating place to be; volume can reach 500 messages per diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst index c2046dec0c2f..80bcc1cabc23 100644 --- a/Documentation/process/4.Coding.rst +++ b/Documentation/process/4.Coding.rst @@ -63,7 +63,7 @@ these rules, to quickly re-format parts of your code automatically, and to review full files in order to spot coding style mistakes, typos and possible improvements. It is also handy for sorting ``#includes``, for aligning variables/macros, for reflowing text and other similar tasks. -See the file :ref:`Documentation/process/clang-format.rst <clangformat>` +See the file :ref:`Documentation/dev-tools/clang-format.rst <clangformat>` for more details. Some basic editor settings, such as indentation and line endings, will be diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index 5685d7bfe4d0..3fc63f27c226 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -33,7 +33,7 @@ GNU C 5.1 gcc --version Clang/LLVM (optional) 13.0.1 clang --version Rust (optional) 1.78.0 rustc --version bindgen (optional) 0.65.1 bindgen --version -GNU make 3.82 make --version +GNU make 4.0 make --version bash 4.2 bash --version binutils 2.25 ld -v flex 2.5.35 flex --version @@ -63,6 +63,7 @@ cpio any cpio --version GNU tar 1.28 tar --version gtags (optional) 6.6.5 gtags --version mkimage (optional) 2017.01 mkimage --version +Python (optional) 3.5.x python3 --version ====================== =============== ======================================== .. [#f1] Sphinx is needed only to build the Kernel documentation @@ -88,14 +89,7 @@ docs on :ref:`Building Linux with Clang/LLVM <kbuild_llvm>`. Rust (optional) --------------- -A particular version of the Rust toolchain is required. Newer versions may or -may not work because the kernel depends on some unstable Rust features, for -the moment. - -Each Rust toolchain comes with several "components", some of which are required -(like ``rustc``) and some that are optional. The ``rust-src`` component (which -is optional) needs to be installed to build the kernel. Other components are -useful for developing. +A recent version of the Rust compiler is required. Please see Documentation/rust/quick-start.rst for instructions on how to satisfy the build requirements of Rust support. In particular, the ``Makefile`` @@ -111,7 +105,7 @@ It depends on ``libclang``. Make ---- -You will need GNU make 3.82 or later to build the kernel. +You will need GNU make 4.0 or later to build the kernel. Bash ---- diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index 7e768c65aa92..04f6aa377a5d 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -732,7 +732,7 @@ these rules, to quickly re-format parts of your code automatically, and to review full files in order to spot coding style mistakes, typos and possible improvements. It is also handy for sorting ``#includes``, for aligning variables/macros, for reflowing text and other similar tasks. -See the file :ref:`Documentation/process/clang-format.rst <clangformat>` +See the file :ref:`Documentation/dev-tools/clang-format.rst <clangformat>` for more details. Some basic editor settings, such as indentation and line endings, will be diff --git a/Documentation/process/email-clients.rst b/Documentation/process/email-clients.rst index 471e1f93fa09..dd22c46d1d02 100644 --- a/Documentation/process/email-clients.rst +++ b/Documentation/process/email-clients.rst @@ -351,22 +351,11 @@ although tab2space problem can be solved with external editor. Another problem is that Gmail will base64-encode any message that has a non-ASCII character. That includes things like European names. -Proton Mail -*********** +HacKerMaiL (TUI) +**************** -Proton Mail has a "feature" where it looks up keys using Web Key Directory -(WKD) and encrypts mail to any recipients for which it finds a key. -Kernel.org publishes the WKD for all developers who have kernel.org accounts. -As a result, emails sent using Proton Mail to kernel.org addresses will be -encrypted. -Unfortunately, Proton Mail does not provide a mechanism to disable the -automatic encryption, viewing it as a privacy feature. -The automatic encryption feature is also enabled for mail sent via the Proton -Mail Bridge, so this affects all outgoing messages, including patches sent with -``git send-email``. -Encrypted mail adds unnecessary friction, as other developers may not have mail -clients, or tooling, configured for use with encrypted mail and some mail -clients may encrypt responses to encrypted mail for all recipients, including -the mailing lists. -Unless a way to disable this "feature" is introduced, Proton Mail is unsuited -to kernel development. +HacKerMaiL (hkml) is a public-inbox based simple mails management tool that +doesn't require subscription of mailing lists. It is developed and maintained +by the DAMON maintainer and aims to support simple development workflows for +DAMON and general kernel subsystems. Refer to the README +(https://github.com/sjp38/hackermail/blob/master/README.md) for details. diff --git a/Documentation/process/handling-regressions.rst b/Documentation/process/handling-regressions.rst index 49ba1410cfce..1f5ab49c48a4 100644 --- a/Documentation/process/handling-regressions.rst +++ b/Documentation/process/handling-regressions.rst @@ -40,10 +40,13 @@ The important bits (aka "The TL;DR") #regzbot from: Some N. Ice Human <some.human@example.com> #regzbot monitor: http://some.bugtracker.example.com/ticket?id=123456789 -#. When submitting fixes for regressions, add "Link:" tags to the patch +#. When submitting fixes for regressions, add "Closes:" tags to the patch description pointing to all places where the issue was reported, as mandated by Documentation/process/submitting-patches.rst and - :ref:`Documentation/process/5.Posting.rst <development_posting>`. + :ref:`Documentation/process/5.Posting.rst <development_posting>`. If you are + only fixing part of the issue that caused the regression, you may use + "Link:" tags instead. regzbot currently makes no distinction between the + two. #. Try to fix regressions quickly once the culprit has been identified; fixes for most regressions should be merged within two weeks, but some need to be @@ -91,10 +94,10 @@ When doing either, consider making the Linux kernel regression tracking bot Note the caret (^) before the "introduced": it tells regzbot to treat the parent mail (the one you reply to) as the initial report for the regression you want to see tracked; that's important, as regzbot will later look out - for patches with "Link:" tags pointing to the report in the archives on + for patches with "Closes:" tags pointing to the report in the archives on lore.kernel.org. - * When forwarding a regressions reported to a bug tracker, include a paragraph + * When forwarding a regression reported to a bug tracker, include a paragraph with these regzbot commands:: #regzbot introduced: 1f2e3d4c5b6a @@ -102,7 +105,7 @@ When doing either, consider making the Linux kernel regression tracking bot #regzbot monitor: http://some.bugtracker.example.com/ticket?id=123456789 Regzbot will then automatically associate patches with the report that - contain "Link:" tags pointing to your mail or the mentioned ticket. + contain "Closes:" tags pointing to your mail or the mentioned ticket. What's important when fixing regressions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -112,10 +115,14 @@ remember to do what Documentation/process/submitting-patches.rst, :ref:`Documentation/process/5.Posting.rst <development_posting>`, and Documentation/process/stable-kernel-rules.rst already explain in more detail: - * Point to all places where the issue was reported using "Link:" tags:: + * Point to all places where the issue was reported using "Closes:" tags:: - Link: https://lore.kernel.org/r/30th.anniversary.repost@klaava.Helsinki.FI/ - Link: https://bugzilla.kernel.org/show_bug.cgi?id=1234567890 + Closes: https://lore.kernel.org/r/30th.anniversary.repost@klaava.Helsinki.FI/ + Closes: https://bugzilla.kernel.org/show_bug.cgi?id=1234567890 + + If you are only fixing part of the issue, you may use "Link:" instead as + described in the first document mentioned above. regzbot currently treats + both of these equivalently and considers the linked reports as resolved. * Add a "Fixes:" tag to specify the commit causing the regression. @@ -126,7 +133,7 @@ All this is expected from you and important when it comes to regression, as these tags are of great value for everyone (you included) that might be looking into the issue weeks, months, or years later. These tags are also crucial for tools and scripts used by other kernel developers or Linux distributions; one of -these tools is regzbot, which heavily relies on the "Link:" tags to associate +these tools is regzbot, which heavily relies on the "Closes:" tags to associate reports for regression with changes resolving them. Expectations and best practices for fixing regressions @@ -326,7 +333,7 @@ How does regression tracking work with regzbot? The bot watches for replies to reports of tracked regressions. Additionally, it's looking out for posted or committed patches referencing such reports -with "Link:" tags; replies to such patch postings are tracked as well. +with "Closes:" tags; replies to such patch postings are tracked as well. Combined this data provides good insights into the current state of the fixing process. @@ -338,8 +345,7 @@ take care of that using ``#regzbot ^introduced``. For developers there normally is no extra work involved, they just need to make sure to do something that was expected long before regzbot came to light: add -"Link:" tags to the patch description pointing to all reports about the issue -fixed. +links to the patch description pointing to all reports about the issue fixed. Do I have to use regzbot? ~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst index eebda4910a88..9438e03d6f50 100644 --- a/Documentation/process/howto.rst +++ b/Documentation/process/howto.rst @@ -331,7 +331,7 @@ they need to be integration-tested. For this purpose, a special testing repository exists into which virtually all subsystem trees are pulled on an almost daily basis: - https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git + https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git This way, the linux-next gives a summary outlook onto what will be expected to go into the mainline kernel at the next merge period. @@ -373,12 +373,12 @@ As some of the above documents describe, the majority of the core kernel developers participate on the Linux Kernel Mailing list. Details on how to subscribe and unsubscribe from the list can be found at: - http://vger.kernel.org/vger-lists.html#linux-kernel + https://subspace.kernel.org/subscribing.html There are archives of the mailing list on the web in many different places. Use a search engine to find these archives. For example: - https://lore.kernel.org/lkml/ + https://lore.kernel.org/linux-kernel/ It is highly recommended that you search the archives about the topic you want to bring up, before you post it to the list. A lot of things @@ -393,13 +393,13 @@ groups. Many of the lists are hosted on kernel.org. Information on them can be found at: - http://vger.kernel.org/vger-lists.html + https://subspace.kernel.org Please remember to follow good behavioral habits when using the lists. Though a bit cheesy, the following URL has some simple guidelines for interacting with the list (or any list): - http://www.albion.com/netiquette/ + https://subspace.kernel.org/etiquette.html If multiple people respond to your mail, the CC: list of recipients may get pretty large. Don't remove anybody from the CC: list without a good diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index de9cbb7bd7eb..6455eba3ef0c 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -107,17 +107,6 @@ developers: kernel-docs deprecated -These are some overall technical guides that have been put here for now for -lack of a better place. - -.. toctree:: - :maxdepth: 1 - - magic-number - clang-format - ../arch/riscv/patch-acceptance - ../core-api/unaligned-memory-access - .. only:: subproject and html Indices diff --git a/Documentation/process/kernel-docs.rst b/Documentation/process/kernel-docs.rst index 8660493b91d0..55552ec4b043 100644 --- a/Documentation/process/kernel-docs.rst +++ b/Documentation/process/kernel-docs.rst @@ -3,27 +3,27 @@ Index of Further Kernel Documentation ===================================== -The need for a document like this one became apparent in the -linux-kernel mailing list as the same questions, asking for pointers -to information, appeared again and again. +The need for a document like this one became apparent in the linux-kernel +mailing list as the same questions, asking for pointers to information, +appeared again and again. -Fortunately, as more and more people get to GNU/Linux, more and more -get interested in the Kernel. But reading the sources is not always -enough. It is easy to understand the code, but miss the concepts, the -philosophy and design decisions behind this code. +Fortunately, as more and more people get to GNU/Linux, more and more get +interested in the Kernel. But reading the sources is not always enough. It +is easy to understand the code, but miss the concepts, the philosophy and +design decisions behind this code. -Unfortunately, not many documents are available for beginners to -start. And, even if they exist, there was no "well-known" place which -kept track of them. These lines try to cover this lack. +Unfortunately, not many documents are available for beginners to start. +And, even if they exist, there was no "well-known" place which kept track +of them. These lines try to cover this lack. PLEASE, if you know any paper not listed here or write a new document, include a reference to it here, following the kernel's patch submission process. Any corrections, ideas or comments are also welcome. All documents are cataloged with the following fields: the document's -"Title", the "Author"/s, the "URL" where they can be found, some -"Keywords" helpful when searching for specific topics, and a brief -"Description" of the Document. +"Title", the "Author"/s, the "URL" where they can be found, some "Keywords" +helpful when searching for specific topics, and a brief "Description" of +the Document. .. note:: @@ -72,9 +72,29 @@ On-line docs programming. Lots of examples. Currently the new version is being actively maintained at https://github.com/sysprog21/lkmpg. + * Title: **Rust for Linux** + + :Author: various + :URL: https://rust-for-linux.com/ + :Date: rolling version + :Keywords: glossary, terms, linux-kernel. + :Description: From the website: "Rust for Linux is the project adding + support for the Rust language to the Linux kernel. This website is + intended as a hub of links, documentation and resources related to + the project". + Published books --------------- + * Title: **Practical Linux System Administration: A Guide to Installation, Configuration, and Management, 1st Edition** + + :Author: Kenneth Hess + :Publisher: O'Reilly Media + :Date: May, 2023 + :Pages: 246 + :ISBN: 978-1098109035 + :Notes: System administration + * Title: **Linux Kernel Debugging: Leverage proven tools and advanced techniques to effectively debug Linux kernels and kernel modules** :Author: Kaiwan N Billimoria @@ -88,9 +108,9 @@ Published books :Author: Kaiwan N Billimoria :Publisher: Packt Publishing Ltd - :Date: March, 2021 + :Date: March, 2021 (Second Edition published in 2024) :Pages: 754 - :ISBN: 978-1789953435 + :ISBN: 978-1789953435 (Second Edition ISBN is 978-1803232225) * Title: **Linux Kernel Programming Part 2 - Char Device Drivers and Kernel Synchronization: Create user-kernel interfaces, work with peripheral I/O, and handle hardware interrupts** @@ -118,15 +138,6 @@ Published books :ISBN: 978-0672329463 :Notes: Foundational book - * Title: **Practical Linux System Administration: A Guide to Installation, Configuration, and Management, 1st Edition** - - :Author: Kenneth Hess - :Publisher: O'Reilly Media - :Date: May, 2023 - :Pages: 246 - :ISBN: 978-1098109035 - :Notes: System administration - .. _ldd3_published: * Title: **Linux Device Drivers, 3rd Edition** @@ -194,13 +205,21 @@ Miscellaneous * Name: **linux-kernel mailing list archives and search engines** - :URL: http://vger.kernel.org/vger-lists.html - :URL: http://www.uwsg.indiana.edu/hypermail/linux/kernel/index.html - :URL: http://groups.google.com/group/mlist.linux.kernel + :URL: https://subspace.kernel.org + :URL: https://lore.kernel.org :Keywords: linux-kernel, archives, search. :Description: Some of the linux-kernel mailing list archivers. If you have a better/another one, please let me know. + * Name: **The Linux Foundation YouTube channel** + + :URL: https://www.youtube.com/user/thelinuxfoundation + :Keywords: linux, videos, linux-foundation, youtube. + :Description: The Linux Foundation uploads video recordings of their + collaborative events, Linux conferences including LinuxCon, and + other original research and content related to Linux and software + development. + ------- This document was originally based on: diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index 5e1fcfad1c4c..fe8616397d63 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -25,9 +25,8 @@ drivers/net (i.e. hardware specific drivers) in the Linux source tree. Note that some subsystems (e.g. wireless drivers) which have a high volume of traffic have their own specific mailing lists and trees. -The netdev list is managed (like many other Linux mailing lists) through -VGER (http://vger.kernel.org/) with archives available at -https://lore.kernel.org/netdev/ +Like many other Linux mailing lists, the netdev list is hosted at +kernel.org with archives available at https://lore.kernel.org/netdev/. Aside from subsystems like those mentioned above, all network-related Linux development (i.e. RFC, review, comments, etc.) takes place on diff --git a/Documentation/process/maintainer-tip.rst b/Documentation/process/maintainer-tip.rst index 64739968afa6..ba312345d030 100644 --- a/Documentation/process/maintainer-tip.rst +++ b/Documentation/process/maintainer-tip.rst @@ -372,17 +372,31 @@ following tag ordering scheme: - Link: ``https://link/to/information`` - For referring to an email on LKML or other kernel mailing lists, - please use the lore.kernel.org redirector URL:: + For referring to an email posted to the kernel mailing lists, please + use the lore.kernel.org redirector URL:: - https://lore.kernel.org/r/email-message@id + Link: https://lore.kernel.org/email-message-id@here - The kernel.org redirector is considered a stable URL, unlike other email - archives. + This URL should be used when referring to relevant mailing list + topics, related patch sets, or other notable discussion threads. + A convenient way to associate ``Link:`` trailers with the commit + message is to use markdown-like bracketed notation, for example:: - Maintainers will add a Link tag referencing the email of the patch - submission when they apply a patch to the tip tree. This tag is useful - for later reference and is also used for commit notifications. + A similar approach was attempted before as part of a different + effort [1], but the initial implementation caused too many + regressions [2], so it was backed out and reimplemented. + + Link: https://lore.kernel.org/some-msgid@here # [1] + Link: https://bugzilla.example.org/bug/12345 # [2] + + You can also use ``Link:`` trailers to indicate the origin of the + patch when applying it to your git tree. In that case, please use the + dedicated ``patch.msgid.link`` domain instead of ``lore.kernel.org``. + This practice makes it possible for automated tooling to identify + which link to use to retrieve the original patch submission. For + example:: + + Link: https://patch.msgid.link/patch-source-message-id@here Please do not use combined tags, e.g. ``Reported-and-tested-by``, as they just complicate automated extraction of tags. diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index 66029999b587..f310f2f36666 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -119,10 +119,10 @@ web, point to it. When linking to mailing list archives, preferably use the lore.kernel.org message archiver service. To create the link URL, use the contents of the -``Message-Id`` header of the message without the surrounding angle brackets. +``Message-ID`` header of the message without the surrounding angle brackets. For example:: - Link: https://lore.kernel.org/r/30th.anniversary.repost@klaava.Helsinki.FI/ + Link: https://lore.kernel.org/30th.anniversary.repost@klaava.Helsinki.FI Please check the link to make sure that it is actually working and points to the relevant message. @@ -243,11 +243,9 @@ linux-kernel@vger.kernel.org should be used by default for all patches, but the volume on that list has caused a number of developers to tune it out. Please do not spam unrelated lists and unrelated people, though. -Many kernel-related lists are hosted on vger.kernel.org; you can find a -list of them at http://vger.kernel.org/vger-lists.html. There are -kernel-related lists hosted elsewhere as well, though. - -Do not send more than 15 patches at once to the vger mailing lists!!! +Many kernel-related lists are hosted at kernel.org; you can find a list +of them at https://subspace.kernel.org. There are kernel-related lists +hosted elsewhere as well, though. Linus Torvalds is the final arbiter of all changes accepted into the Linux kernel. His e-mail address is <torvalds@linux-foundation.org>. @@ -866,9 +864,6 @@ Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". <http://www.kroah.com/log/linux/maintainer-06.html> -NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people! - <https://lore.kernel.org/r/20050711.125305.08322243.davem@davemloft.net> - Kernel Documentation/process/coding-style.rst Linus Torvalds's mail on the canonical patch format: diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst index b13e19d84744..750ff371570a 100644 --- a/Documentation/rust/arch-support.rst +++ b/Documentation/rust/arch-support.rst @@ -18,7 +18,7 @@ Architecture Level of support Constraints ``arm64`` Maintained Little Endian only. ``loongarch`` Maintained \- ``riscv`` Maintained ``riscv64`` only. -``um`` Maintained ``x86_64`` only. +``um`` Maintained \- ``x86`` Maintained ``x86_64`` only. ============= ================ ============================================== diff --git a/Documentation/rust/general-information.rst b/Documentation/rust/general-information.rst index 4bb6ac12d482..e3f388ef4ee4 100644 --- a/Documentation/rust/general-information.rst +++ b/Documentation/rust/general-information.rst @@ -7,6 +7,14 @@ This document contains useful information to know when working with the Rust support in the kernel. +``no_std`` +---------- + +The Rust support in the kernel can link only `core <https://doc.rust-lang.org/core/>`_, +but not `std <https://doc.rust-lang.org/std/>`_. Crates for use in the +kernel must opt into this behavior using the ``#![no_std]`` attribute. + + Code documentation ------------------ diff --git a/Documentation/rust/quick-start.rst b/Documentation/rust/quick-start.rst index cc3f11e0d441..d06a36106cd4 100644 --- a/Documentation/rust/quick-start.rst +++ b/Documentation/rust/quick-start.rst @@ -5,17 +5,93 @@ Quick Start This document describes how to get started with kernel development in Rust. +There are a few ways to install a Rust toolchain needed for kernel development. +A simple way is to use the packages from your Linux distribution if they are +suitable -- the first section below explains this approach. An advantage of this +approach is that, typically, the distribution will match the LLVM used by Rust +and Clang. + +Another way is using the prebuilt stable versions of LLVM+Rust provided on +`kernel.org <https://kernel.org/pub/tools/llvm/rust/>`_. These are the same slim +and fast LLVM toolchains from :ref:`Getting LLVM <getting_llvm>` with versions +of Rust added to them that Rust for Linux supports. Two sets are provided: the +"latest LLVM" and "matching LLVM" (please see the link for more information). + +Alternatively, the next two "Requirements" sections explain each component and +how to install them through ``rustup``, the standalone installers from Rust +and/or building them. + +The rest of the document explains other aspects on how to get started. + + +Distributions +------------- + +Arch Linux +********** + +Arch Linux provides recent Rust releases and thus it should generally work out +of the box, e.g.:: + + pacman -S rust rust-src rust-bindgen + + +Debian +****** + +Debian Unstable (Sid), outside of the freeze period, provides recent Rust +releases and thus it should generally work out of the box, e.g.:: + + apt install rustc rust-src bindgen rustfmt rust-clippy + + +Fedora Linux +************ + +Fedora Linux provides recent Rust releases and thus it should generally work out +of the box, e.g.:: + + dnf install rust rust-src bindgen-cli rustfmt clippy + + +Gentoo Linux +************ + +Gentoo Linux (and especially the testing branch) provides recent Rust releases +and thus it should generally work out of the box, e.g.:: + + USE='rust-src rustfmt clippy' emerge dev-lang/rust dev-util/bindgen + +``LIBCLANG_PATH`` may need to be set. + + +Nix +*** + +Nix (unstable channel) provides recent Rust releases and thus it should +generally work out of the box, e.g.:: + + { pkgs ? import <nixpkgs> {} }: + pkgs.mkShell { + nativeBuildInputs = with pkgs; [ rustc rust-bindgen rustfmt clippy ]; + RUST_LIB_SRC = "${pkgs.rust.packages.stable.rustPlatform.rustLibSrc}"; + } + + +openSUSE +******** + +openSUSE Slowroll and openSUSE Tumbleweed provide recent Rust releases and thus +they should generally work out of the box, e.g.:: + + zypper install rust rust1.79-src rust-bindgen clang + Requirements: Building ---------------------- This section explains how to fetch the tools needed for building. -Some of these requirements might be available from Linux distributions -under names like ``rustc``, ``rust-src``, ``rust-bindgen``, etc. However, -at the time of writing, they are likely not to be recent enough unless -the distribution tracks the latest releases. - To easily check whether the requirements are met, the following target can be used:: @@ -29,16 +105,15 @@ if that is the case. rustc ***** -A particular version of the Rust compiler is required. Newer versions may or -may not work because, for the moment, the kernel depends on some unstable -Rust features. +A recent version of the Rust compiler is required. If ``rustup`` is being used, enter the kernel build directory (or use -``--path=<build-dir>`` argument to the ``set`` sub-command) and run:: +``--path=<build-dir>`` argument to the ``set`` sub-command) and run, +for instance:: - rustup override set $(scripts/min-tool-version.sh rustc) + rustup override set stable -This will configure your working directory to use the correct version of +This will configure your working directory to use the given version of ``rustc`` without affecting your default toolchain. Note that the override applies to the current working directory (and its @@ -65,9 +140,9 @@ version later on requires re-adding the component. Otherwise, if a standalone installer is used, the Rust source tree may be downloaded into the toolchain's installation folder:: - curl -L "https://static.rust-lang.org/dist/rust-src-$(scripts/min-tool-version.sh rustc).tar.gz" | + curl -L "https://static.rust-lang.org/dist/rust-src-$(rustc --version | cut -d' ' -f2).tar.gz" | tar -xzf - -C "$(rustc --print sysroot)/lib" \ - "rust-src-$(scripts/min-tool-version.sh rustc)/rust-src/lib/" \ + "rust-src-$(rustc --version | cut -d' ' -f2)/rust-src/lib/" \ --strip-components=3 In this case, upgrading the Rust compiler version later on requires manually @@ -101,26 +176,22 @@ bindgen ******* The bindings to the C side of the kernel are generated at build time using -the ``bindgen`` tool. A particular version is required. +the ``bindgen`` tool. -Install it via (note that this will download and build the tool from source):: +Install it, for instance, via (note that this will download and build the tool +from source):: - cargo install --locked --version $(scripts/min-tool-version.sh bindgen) bindgen-cli + cargo install --locked bindgen-cli -``bindgen`` needs to find a suitable ``libclang`` in order to work. If it is -not found (or a different ``libclang`` than the one found should be used), -the process can be tweaked using the environment variables understood by -``clang-sys`` (the Rust bindings crate that ``bindgen`` uses to access -``libclang``): +``bindgen`` uses the ``clang-sys`` crate to find a suitable ``libclang`` (which +may be linked statically, dynamically or loaded at runtime). By default, the +``cargo`` command above will produce a ``bindgen`` binary that will load +``libclang`` at runtime. If it is not found (or a different ``libclang`` than +the one found should be used), the process can be tweaked, e.g. by using the +``LIBCLANG_PATH`` environment variable. For details, please see ``clang-sys``'s +documentation at: -* ``LLVM_CONFIG_PATH`` can be pointed to an ``llvm-config`` executable. - -* Or ``LIBCLANG_PATH`` can be pointed to a ``libclang`` shared library - or to the directory containing it. - -* Or ``CLANG_PATH`` can be pointed to a ``clang`` executable. - -For details, please see ``clang-sys``'s documentation at: + https://github.com/KyleMayes/clang-sys#linking https://github.com/KyleMayes/clang-sys#environment-variables @@ -164,20 +235,6 @@ can be installed manually:: The standalone installers also come with ``clippy``. -cargo -***** - -``cargo`` is the Rust native build system. It is currently required to run -the tests since it is used to build a custom standard library that contains -the facilities provided by the custom ``alloc`` in the kernel. The tests can -be run using the ``rusttest`` Make target. - -If ``rustup`` is being used, all the profiles already install the tool, -thus nothing needs to be done. - -The standalone installers also come with ``cargo``. - - rustdoc ******* diff --git a/Documentation/rust/testing.rst b/Documentation/rust/testing.rst index acfd0c2be48d..568b71b415a4 100644 --- a/Documentation/rust/testing.rst +++ b/Documentation/rust/testing.rst @@ -131,9 +131,8 @@ Additionally, there are the ``#[test]`` tests. These can be run using the make LLVM=1 rusttest -This requires the kernel ``.config`` and downloads external repositories. It -runs the ``#[test]`` tests on the host (currently) and thus is fairly limited in -what these tests can test. +This requires the kernel ``.config``. It runs the ``#[test]`` tests on the host +(currently) and thus is fairly limited in what these tests can test. The Kselftests -------------- diff --git a/Documentation/scheduler/sched-design-CFS.rst b/Documentation/scheduler/sched-design-CFS.rst index e030876fbd68..bc1e507269c6 100644 --- a/Documentation/scheduler/sched-design-CFS.rst +++ b/Documentation/scheduler/sched-design-CFS.rst @@ -1,3 +1,5 @@ +.. _sched_design_CFS: + ============= CFS Scheduler ============= diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst index 71592f3ce89b..77bae5e5328b 100644 --- a/Documentation/staging/index.rst +++ b/Documentation/staging/index.rst @@ -8,6 +8,7 @@ Unsorted Documentation crc32 lzo + magic-number remoteproc rpmsg speculation diff --git a/Documentation/process/magic-number.rst b/Documentation/staging/magic-number.rst index 7029c3c084ee..7029c3c084ee 100644 --- a/Documentation/process/magic-number.rst +++ b/Documentation/staging/magic-number.rst diff --git a/Documentation/tools/rv/rv-mon.rst b/Documentation/tools/rv/rv-mon.rst index af0f329a7c9c..4d86fd55eb59 100644 --- a/Documentation/tools/rv/rv-mon.rst +++ b/Documentation/tools/rv/rv-mon.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -======= -rv-list -======= +====== +rv-mon +====== ----------------------- List available monitors ----------------------- diff --git a/Documentation/trace/ftrace-design.rst b/Documentation/trace/ftrace-design.rst index 6893399157f0..dc82d64b3a44 100644 --- a/Documentation/trace/ftrace-design.rst +++ b/Documentation/trace/ftrace-design.rst @@ -217,18 +217,6 @@ along to ftrace_push_return_trace() instead of a stub value of 0. Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer. -HAVE_FUNCTION_GRAPH_RET_ADDR_PTR --------------------------------- - -An arch may pass in a pointer to the return address on the stack. This -prevents potential stack unwinding issues where the unwinder gets out of -sync with ret_stack and the wrong addresses are reported by -ftrace_graph_ret_addr(). - -Adding support for it is easy: just define the macro in asm/ftrace.h and -pass the return address pointer as the 'retp' argument to -ftrace_push_return_trace(). - HAVE_SYSCALL_TRACEPOINTS ------------------------ diff --git a/Documentation/trace/osnoise-tracer.rst b/Documentation/trace/osnoise-tracer.rst index 140ef2533d26..a520adbd3476 100644 --- a/Documentation/trace/osnoise-tracer.rst +++ b/Documentation/trace/osnoise-tracer.rst @@ -108,7 +108,7 @@ The tracer has a set of options inside the osnoise directory, they are: option. - tracing_threshold: the minimum delta between two time() reads to be considered as noise, in us. When set to 0, the default value will - be used, which is currently 5 us. + be used, which is currently 1 us. - osnoise/options: a set of on/off options that can be enabled by writing the option name to the file or disabled by writing the option name preceded with the 'NO\_' prefix. For example, writing diff --git a/Documentation/translations/it_IT/riscv/patch-acceptance.rst b/Documentation/translations/it_IT/arch/riscv/patch-acceptance.rst index 2d7afb1f6959..e0ad63643f1b 100644 --- a/Documentation/translations/it_IT/riscv/patch-acceptance.rst +++ b/Documentation/translations/it_IT/arch/riscv/patch-acceptance.rst @@ -1,6 +1,6 @@ -.. include:: ../disclaimer-ita.rst +.. include:: ../../disclaimer-ita.rst -:Original: :doc:`../../../arch/riscv/patch-acceptance` +:Original: :doc:`../../../../arch/riscv/patch-acceptance` :Translator: Federico Vaga <federico.vaga@vaga.pv.it> arch/riscv linee guida alla manutenzione per gli sviluppatori @@ -22,6 +22,26 @@ sperimentale. Desideriamo estendere questi stessi principi al codice relativo all'architettura RISC-V che verrà accettato per l'inclusione nel kernel. +Patchwork +--------- + +RISC-V ha un'istanza di patchwork dov'è possibile controllare lo stato delle patch: + + https://patchwork.kernel.org/project/linux-riscv/list/ + +Se la vostra patch non appare nella vista predefinita, i manutentori di RISC-V +hanno probabilmente richiesto delle modifiche o si aspettano che venga applicata +a un altro albero. + +Il processo automatico viene eseguito su questa istanza di patchwork, costruendo +e collaudando le patch man mano che arrivano. Il processo applica le patch al +riferimento HEAD corrente dei rami `for-next` e `fixes` dei sorgenti RISC-V, +questo a seconda che la patch sia stata o meno individuata come correzione. In +caso contrario, utilizzerà il ramo `master` di RISC-V. L'esatto commit a cui è +stata applicata una serie di patch sarà annotato su patchwork. È improbabile che +vengano applicate Le patch che non passano i controlli, nella maggior parte dei +casi dovranno essere ripresentate. + In aggiunta alla lista delle verifiche da fare prima di inviare una patch ------------------------------------------------------------------------- diff --git a/Documentation/translations/it_IT/doc-guide/kernel-doc.rst b/Documentation/translations/it_IT/doc-guide/kernel-doc.rst index 74057d203539..aa0e31d353d6 100644 --- a/Documentation/translations/it_IT/doc-guide/kernel-doc.rst +++ b/Documentation/translations/it_IT/doc-guide/kernel-doc.rst @@ -370,6 +370,50 @@ Anche i tipi di dato per prototipi di funzione possono essere documentati:: */ typedef void (*type_name)(struct v4l2_ctrl *arg1, void *arg2); +Documentazione di macro simili a oggetti +---------------------------------------- + +Le macro simili a oggetti si distinguono dalle macro simili a funzione. Esse si +distinguono in base al fatto che il nome della macro simile a funzione sia +immediatamente seguito da una parentesi sinistra ('(') mentre in quelle simili a +oggetti no. + +Le macro simili a funzioni sono gestite come funzioni da ``scripts/kernel-doc``. +Possono avere un elenco di parametri. Le macro simili a oggetti non hanno un +elenco di parametri. + +Il formato generale di un commento kernel-doc per una macro simile a oggetti è:: + + /** + * define object_name - Brief description. + * + * Description of the object. + */ + +Esempio:: + + /** + * define MAX_ERRNO - maximum errno value that is supported + * + * Kernel pointers have redundant information, so we can use a + * scheme where we can return either an error code or a normal + * pointer with the same return value. + */ + #define MAX_ERRNO 4095 + +Esempio:: + + /** + * define DRM_GEM_VRAM_PLANE_HELPER_FUNCS - \ + * Initializes struct drm_plane_helper_funcs for VRAM handling + * + * This macro initializes struct drm_plane_helper_funcs to use the + * respective helper functions. + */ + #define DRM_GEM_VRAM_PLANE_HELPER_FUNCS \ + .prepare_fb = drm_gem_vram_plane_helper_prepare_fb, \ + .cleanup_fb = drm_gem_vram_plane_helper_cleanup_fb + Marcatori e riferimenti ----------------------- diff --git a/Documentation/translations/it_IT/doc-guide/parse-headers.rst b/Documentation/translations/it_IT/doc-guide/parse-headers.rst index c7076a21667a..026a23e49767 100644 --- a/Documentation/translations/it_IT/doc-guide/parse-headers.rst +++ b/Documentation/translations/it_IT/doc-guide/parse-headers.rst @@ -63,7 +63,7 @@ DESCRIZIONE *********** Converte un file d'intestazione o un file sorgente C (C_FILE) in un testo -ReStructuredText incluso mediante il blocco ..parsed-literal +reStructuredText incluso mediante il blocco ..parsed-literal con riferimenti alla documentazione che descrive l'API. Opzionalmente, il programma accetta anche un altro file (EXCEPTIONS_FILE) che descrive quali elementi debbano essere ignorati o il cui riferimento diff --git a/Documentation/translations/it_IT/process/5.Posting.rst b/Documentation/translations/it_IT/process/5.Posting.rst index a7e2a3238415..a61d9e6f7433 100644 --- a/Documentation/translations/it_IT/process/5.Posting.rst +++ b/Documentation/translations/it_IT/process/5.Posting.rst @@ -223,8 +223,9 @@ Un'etichetta ci può dire quale commit ha introdotto il problema che viene corre Fixes: 1f2e3d4c5b6a ("The first line of the commit specified by the first 12 characters of its SHA-1 ID") Un'altra etichetta viene usata per fornire collegamenti a pagine web contenenti -maggiori informazioni, per esempio un rapporto circa il baco risolto dalla -patch, oppure un documento con le specifiche implementate dalla patch:: +maggiori informazioni, per esempio una discussione avvenuta precedentemente +circa il baco risolto dalla patch, oppure un documento con le specifiche +implementate dalla patch:: Link: https://example.com/somewhere.html optional-other-stuff @@ -233,7 +234,19 @@ alla più recente discussione pubblica. A volte questo è fatto automaticamente alcuni strumenti come b4 or un *hook* git come quello descritto qui 'Documentation/translations/it_IT/maintainer/configure-git.rst' -Un terzo tipo di etichetta viene usato per indicare chi ha contribuito allo + +Se il collegamento indirizza verso un rapporto su un baco risolto dalla patch, +allora usate l'etichetta "Closes:":: + + Closes: https://example.com/issues/1234 optional-other-stuff + +Alcune piattaforme di tracciamento di bachi hanno la capacità di chiudere +automaticamente il problema se l'etichetta è presente nel messaggio. Alcuni +automatismi che monitorano la liste di discussione possono anche tracciare +queste etichette e intraprendere azioni. Piattaforme private e URL invalidi sono +proibiti. + +Un altro tipo di etichetta viene usato per indicare chi ha contribuito allo sviluppo della patch. Tutte queste etichette seguono il formato:: tag: Full Name <email address> optional-other-stuff @@ -267,7 +280,13 @@ Le etichette in uso più comuni sono: - Reported-by: menziona l'utente che ha riportato il problema corretto da questa patch; quest'etichetta viene usata per dare credito alle persone che hanno verificato il codice e ci hanno fatto sapere quando le cose non - funzionavano correttamente. Se esiste un rapporto disponibile sul web, allora + funzionavano correttamente. Questa etichetta dovrebbe essere seguita da + quella Closes: con un indirizzo al rapporto, a meno che questo non sia + disponibile sul web. L'etichetta Link: può essere usata in alternativa a + Closes: se la patch corregge solo in parte il problema riportato nel + rapporto. + + Se esiste un rapporto disponibile sul web, allora L'etichetta dovrebbe essere seguita da un collegamento al suddetto rapporto. - Cc: la persona menzionata ha ricevuto una copia della patch ed ha avuto diff --git a/Documentation/translations/it_IT/process/6.Followthrough.rst b/Documentation/translations/it_IT/process/6.Followthrough.rst index df7d5fb28832..685eee5690f3 100644 --- a/Documentation/translations/it_IT/process/6.Followthrough.rst +++ b/Documentation/translations/it_IT/process/6.Followthrough.rst @@ -60,6 +60,13 @@ resa molto più facile se tenete presente alcuni dettagli: stanno lavorando per la creazione del miglior kernel possibile; non stanno cercando di creare un disagio ad aziende concorrenti. + - Preparatevi a richieste apparentemente sciocche di modifiche allo stile di + codifica e a richieste di trasferire parte del vostro codice in parti + condivise del kernel. Uno dei compiti dei manutentori è quello di mantenere + lo aspetto del codice. A volte questo significa che l'ingegnoso stratagemma + nel vostro driver per aggirare un problema deve diventare una caratteristica + generalizzata del kernel pronta per essere riutilizzata. + Quello che si sta cercando di dire è che, quando i revisori vi inviano degli appunti dovete fare attenzione alle osservazioni tecniche che vi stanno facendo. Non lasciate che il loro modo di esprimersi o il vostro orgoglio diff --git a/Documentation/translations/it_IT/process/7.AdvancedTopics.rst b/Documentation/translations/it_IT/process/7.AdvancedTopics.rst index a83fcfe18024..b3d8b62f3b57 100644 --- a/Documentation/translations/it_IT/process/7.AdvancedTopics.rst +++ b/Documentation/translations/it_IT/process/7.AdvancedTopics.rst @@ -200,7 +200,7 @@ all'ABI dello spazio utente, eccetera. Qualunque tipo di revisione è ben accetta e di valore, se porta ad avere un codice migliore nel kernel. Non esistono requisiti particolarmente stringenti per l'uso di etichette come -``Reviewd-by``. Tuttavia, perché la revisione sia efficace ci si aspetta un +``Reviewed-by``. Tuttavia, perché la revisione sia efficace ci si aspetta un qualche tipo di messaggio che dica "ho verificato A, B e C nel codice che è appena stato inviato e mi sembra tutto in ordine". Inoltre, questo permette ai manutentori di prendere conoscenza circa una revisione avvenuta per davvero. diff --git a/Documentation/translations/it_IT/process/changes.rst b/Documentation/translations/it_IT/process/changes.rst index ade695a7de19..0bcf8423cc80 100644 --- a/Documentation/translations/it_IT/process/changes.rst +++ b/Documentation/translations/it_IT/process/changes.rst @@ -33,8 +33,8 @@ PC Card, per esempio, probabilmente non dovreste preoccuparvi di pcmciautils. Programma Versione minima Comando per verificare la versione ====================== ================= ======================================== GNU C 5.1 gcc --version -Clang/LLVM (optional) 11.0.0 clang --version -Rust (opzionale) 1.74.1 rustc --version +Clang/LLVM (optional) 13.0.0 clang --version +Rust (opzionale) 1.76.0 rustc --version bindgen (opzionale) 0.65.1 bindgen --version GNU make 3.81 make --version bash 4.2 bash --version diff --git a/Documentation/translations/it_IT/process/clang-format.rst b/Documentation/translations/it_IT/process/clang-format.rst index 29f83c198025..6fab07772da0 100644 --- a/Documentation/translations/it_IT/process/clang-format.rst +++ b/Documentation/translations/it_IT/process/clang-format.rst @@ -1,6 +1,6 @@ .. include:: ../disclaimer-ita.rst -:Original: :ref:`Documentation/process/clang-format.rst <clangformat>` +:Original: :ref:`Documentation/dev-tools/clang-format.rst <clangformat>` :Translator: Federico Vaga <federico.vaga@vaga.pv.it> .. _it_clangformat: diff --git a/Documentation/translations/it_IT/process/index.rst b/Documentation/translations/it_IT/process/index.rst index 73c643dcc541..c24500f74660 100644 --- a/Documentation/translations/it_IT/process/index.rst +++ b/Documentation/translations/it_IT/process/index.rst @@ -107,7 +107,7 @@ perché non si è trovato un posto migliore. magic-number clang-format - ../riscv/patch-acceptance + ../arch/riscv/patch-acceptance .. only:: subproject and html diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst index ae92ab633c16..cd8f23571835 100644 --- a/Documentation/translations/it_IT/process/magic-number.rst +++ b/Documentation/translations/it_IT/process/magic-number.rst @@ -1,6 +1,6 @@ .. include:: ../disclaimer-ita.rst -:Original: :ref:`Documentation/process/magic-number.rst <magicnumbers>` +:Original: :ref:`Documentation/staging/magic-number.rst <magicnumbers>` :Translator: Federico Vaga <federico.vaga@vaga.pv.it> .. _it_magicnumbers: diff --git a/Documentation/translations/it_IT/process/stable-kernel-rules.rst b/Documentation/translations/it_IT/process/stable-kernel-rules.rst index a2577a806a18..b1592f10f7a7 100644 --- a/Documentation/translations/it_IT/process/stable-kernel-rules.rst +++ b/Documentation/translations/it_IT/process/stable-kernel-rules.rst @@ -11,32 +11,31 @@ Tutto quello che volevate sapere sui rilasci -stable di Linux Regole sul tipo di patch che vengono o non vengono accettate nei sorgenti "-stable": - - Ovviamente dev'essere corretta e verificata. - - Non dev'essere più grande di 100 righe, incluso il contesto. - - Deve correggere una cosa sola. - - Deve correggere un baco vero che sta disturbando gli utenti (non cose del - tipo "Questo potrebbe essere un problema ..."). - - Deve correggere un problema di compilazione (ma non per cose già segnate - con CONFIG_BROKEN), un kernel oops, un blocco, una corruzione di dati, - un vero problema di sicurezza, o problemi del tipo "oh, questo non va bene". - In pratica, qualcosa di critico. - - Problemi importanti riportati dagli utenti di una distribuzione potrebbero - essere considerati se correggono importanti problemi di prestazioni o di - interattività. Dato che questi problemi non sono così ovvi e la loro - correzione ha un'alta probabilità d'introdurre una regressione, dovrebbero - essere sottomessi solo dal manutentore della distribuzione includendo un - link, se esiste, ad un rapporto su bugzilla, e informazioni aggiuntive - sull'impatto che ha sugli utenti. - - Non deve correggere problemi relativi a una "teorica sezione critica", - a meno che non venga fornita anche una spiegazione su come questa si - possa verificare. - - Non deve includere alcuna correzione "banale" (correzioni grammaticali, - pulizia dagli spazi bianchi, eccetera). - - Deve rispettare le regole scritte in - :ref:`Documentation/translations/it_IT/process/submitting-patches.rst <it_submittingpatches>` - - Questa patch o una equivalente deve esistere già nei sorgenti principali di - Linux - +- Questa patch o una equivalente deve esistere già nei sorgenti principali di + Linux (upstream) +- Ovviamente dev'essere corretta e verificata. +- Non dev'essere più grande di 100 righe, incluso il contesto. +- Deve rispettare le regole scritte in + :ref:`Documentation/translations/it_IT/process/submitting-patches.rst <it_submittingpatches>` +- Deve correggere un vero baco che causi problemi agli utenti oppure aggiunge + un nuovo identificatore di dispositivo. Maggiori dettagli per il primo caso: + + - Corregge un problema come un oops, un blocco, una corruzione di dati, un + vero problema di sicurezza, una stranezza hardware, un problema di + compilazione (ma non per cose già segnate con CONFIG_BROKEN), o problemi + del tipo "oh, questo non va bene". + - Problemi importanti riportati dagli utenti di una distribuzione potrebbero + essere considerati se correggono importanti problemi di prestazioni o di + interattività. Dato che questi problemi non sono così ovvi e la loro + correzione ha un'alta probabilità d'introdurre una regressione, + dovrebbero essere sottomessi solo dal manutentore della distribuzione + includendo un link, se esiste, ad un rapporto su bugzilla, e informazioni + aggiuntive sull'impatto che ha sugli utenti. + - Non si accettano cose del tipo "Questo potrebbe essere un problema ..." + come una teorica sezione critica, senza aver fornito anche una spiegazione + su come il baco possa essere sfruttato. + - Non deve includere alcuna correzione "banale" (correzioni grammaticali, + pulizia dagli spazi bianchi, eccetera). Procedura per sottomettere patch per i sorgenti -stable ------------------------------------------------------- @@ -46,177 +45,204 @@ Procedura per sottomettere patch per i sorgenti -stable di revisione -stable, ma dovrebbe seguire le procedure descritte in :ref:`Documentation/translations/it_IT/process/security-bugs.rst <it_securitybugs>`. -Per tutte le altre sottomissioni, scegliere una delle seguenti procedure ------------------------------------------------------------------------- +Ci sono tre opzioni per inviare una modifica per i sorgenti -stable: + +1. Aggiungi un'etichetta 'stable' alla descrizione della patch al momento della + sottomissione per l'inclusione nei sorgenti principali. +2. Chiedere alla squadra "stable" di prendere una patch già applicata sui + sorgenti principali +3. Sottomettere una patch alla squadra "stable" equivalente ad una modifica già + fatta sui sorgenti principali. + +Le seguenti sezioni descrivono con maggiori dettagli ognuna di queste opzioni + +L':ref:`it_option_1` è **fortemente** raccomandata; è il modo più facile e +usato. L':ref:`it_option_2` si usa quando al momento della sottomissione non si +era pensato di riportare la modifica su versioni precedenti. +L':ref:`it_option_3` è un'alternativa ai due metodi precedenti quando la patch +nei sorgenti principali ha bisogno di aggiustamenti per essere applicata su +versioni precedenti (per esempio a causa di cambiamenti dell'API). + +Quando si utilizza l'opzione 2 o 3 è possibile chiedere che la modifica sia +inclusa in specifiche versioni stabili. In tal caso, assicurarsi che la correzione +o una equivalente sia applicabile, o già presente in tutti i sorgenti +stabili più recenti ancora supportati. Questo ha lo scopo di prevenire +regressioni che gli utenti potrebbero incontrare in seguito durante +l'aggiornamento, se ad esempio una correzione per 5.19-rc1 venisse +riportata a 5.10.y, ma non a 5.15.y. .. _it_option_1: Opzione 1 ********* -Per far sì che una patch venga automaticamente inclusa nei sorgenti stabili, -aggiungete l'etichetta +Aggiungete la seguente etichetta nell'area delle firme per far sì che una patch +che state inviando per l'inclusione nei sorgenti principali venga presa +automaticamente anche per quelli stabili:: -.. code-block:: none + Cc: stable@vger.kernel.org - Cc: stable@vger.kernel.org +Invece, usate ``Cc: stable@vger.kernel.org`` quando state inviando correzioni +per vulnerabilità non ancora di pubblico dominio: questo riduce il rischio di +esporre accidentalmente al pubblico la correzione quando si usa 'git +send-email', perché i messaggi inviati a quell'indirizzo non vengono inviati da +nessuna parte. -nell'area dedicata alla firme. Una volta che la patch è stata inclusa, verrà -applicata anche sui sorgenti stabili senza che l'autore o il manutentore -del sottosistema debba fare qualcosa. +Una volta che la patch è stata inclusa, verrà applicata anche sui sorgenti +stabili senza che l'autore o il manutentore del sottosistema debba fare +qualcosa. -.. _it_option_2: +Per lasciare una nota per la squadra "stable", usate commenti in linea in stile +shell (leggere oltre per maggiori dettagli). -Opzione 2 -********* +* Specificate i prerequisiti per le patch aggiuntive:: -Dopo che la patch è stata inclusa nei sorgenti Linux, inviate una mail a -stable@vger.kernel.org includendo: il titolo della patch, l'identificativo -del commit, il perché pensate che debba essere applicata, e in quale versione -del kernel la vorreste vedere. + Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle + Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle + Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic + Cc: <stable@vger.kernel.org> # 3.3.x + Signed-off-by: Ingo Molnar <mingo@elte.hu> -.. _it_option_3: + La sequenza di etichette ha il seguente significato:: -Opzione 3 -********* + git cherry-pick a1f84a3 + git cherry-pick 1b9508f + git cherry-pick fd21073 + git cherry-pick <this commit> -Inviata la patch, dopo aver verificato che rispetta le regole descritte in -precedenza, a stable@vger.kernel.org. Dovete annotare nel changelog -l'identificativo del commit nei sorgenti principali, così come la versione -del kernel nel quale vorreste vedere la patch. + Notate che per una serie di patch non dovere elencare come necessarie tutte + le patch della serie stessa. Per esempio se avete la seguente serie:: -L':ref:`it_option_1` è fortemente raccomandata; è il modo più facile e usato. -L':ref:`it_option_2` e l':ref:`it_option_3` sono più utili quando, al momento -dell'inclusione dei sorgenti principali, si ritiene che non debbano essere -incluse anche in quelli stabili (per esempio, perché si crede che si dovrebbero -fare più verifiche per eventuali regressioni). L':ref:`it_option_3` è -particolarmente utile se una patch dev'essere riportata su una versione -precedente (per esempio la patch richiede modifiche a causa di cambiamenti di -API). + patch1 + patch2 -Notate che per l':ref:`it_option_3`, se la patch è diversa da quella nei -sorgenti principali (per esempio perché è stato necessario un lavoro di -adattamento) allora dev'essere ben documentata e giustificata nella descrizione -della patch. + dove patch2 dipende da patch1, non dovete elencare patch1 come requisito per + patch2 se avete già menzionato patch1 per l'inclusione in "stable" -L'identificativo del commit nei sorgenti principali dev'essere indicato sopra -al messaggio della patch, così: +* Evidenziate le patch che hanno dei requisiti circa la versione del kernel:: -.. code-block:: none + Cc: <stable@vger.kernel.org> # 3.3.x - commit <sha1> upstream. + L'etichetta ha il seguente significato:: -o in alternativa: + git cherry-pick <this commit> -.. code-block:: none + per ogni sorgente "-stable" che inizia con la versione indicata. - [ Upstream commit <sha1> ] + Notate che queste etichette non sono necessarie se la squadre "stable" può + dedurre la versione dalle etichette Fixes: -In aggiunta, alcune patch inviate attraverso l':ref:`it_option_1` potrebbero -dipendere da altre che devo essere incluse. Questa situazione può essere -indicata nel seguente modo nell'area dedicata alle firme: +* Ritardare l'inclusione di patch:: + Cc: <stable@vger.kernel.org> # after -rc3 -.. code-block:: none +* Evidenziare problemi noti:: - Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle - Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle - Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic - Cc: <stable@vger.kernel.org> # 3.3.x - Signed-off-by: Ingo Molnar <mingo@elte.hu> + Cc: <stable@vger.kernel.org> # see patch description, needs adjustments for <= 6.3 -La sequenza di etichette ha il seguente significato: +Esiste un'ulteriore variante per l'etichetta "stable" che permette di comunicare +allo strumento di *backporting* di ignorare un cambiamento:: -.. code-block:: none + Cc: <stable+noautosel@kernel.org> # reason goes here, and must be present - git cherry-pick a1f84a3 - git cherry-pick 1b9508f - git cherry-pick fd21073 - git cherry-pick <this commit> -Inoltre, alcune patch potrebbero avere dei requisiti circa la versione del -kernel. Questo può essere indicato usando il seguente formato nell'area -dedicata alle firme: +.. _it_option_2: -.. code-block:: none +Opzione 2 +********* - Cc: <stable@vger.kernel.org> # 3.3.x +Se la patch è già stata inclusa nei sorgenti Linux, inviate una mail a +stable@vger.kernel.org includendo: il titolo della patch, l'identificativo +del commit, il perché pensate che debba essere applicata, e in quali versioni +del kernel la vorreste vedere. -L'etichetta ha il seguente significato: +.. _it_option_3: -.. code-block:: none +Opzione 3 +********* - git cherry-pick <this commit> +Dopo aver verificato che rispetta le regole descritte in precedenza, inviata la +patch a stable@vger.kernel.org facendo anche menzione delle versioni nella quale +si vorrebbe applicarla. Nel farlo, dovete annotare nel changelog +l'identificativo del commit nei sorgenti principali, così come la versione del +kernel nel quale vorreste vedere la patch.:: -per ogni sorgente "-stable" che inizia con la versione indicata. + commit <sha1> upstream. -Dopo la sottomissione: +o in alternativa:: - - Il mittente riceverà un ACK quando la patch è stata accettata e messa in - coda, oppure un NAK se la patch è stata rigettata. A seconda degli impegni - degli sviluppatori, questa risposta potrebbe richiedere alcuni giorni. - - Se accettata, la patch verrà aggiunta alla coda -stable per essere - revisionata dal altri sviluppatori e dal principale manutentore del - sottosistema. + [ Upstream commit <sha1> ] +Se la patch inviata devia rispetto all'originale presente nei sorgenti +principali (per esempio per adattarsi ad un cambiamento di API), allora questo +dev'essere giustificato e dettagliato in modo chiaro nella descrizione. + +Dopo la sottomissione +--------------------- + +Il mittente riceverà un ACK quando la patch è stata accettata e messa in coda, +oppure un NAK se la patch è stata rigettata. La risposta potrebbe richiedere +alcuni giorni in funzione dei piani dei membri della squadra "stable", + +Se accettata, la patch verrà aggiunta alla coda -stable per essere revisionata +dal altri sviluppatori e dal principale manutentore del sottosistema. Ciclo di una revisione ---------------------- - - Quando i manutentori -stable decidono di fare un ciclo di revisione, le - patch vengono mandate al comitato per la revisione, ai manutentori soggetti - alle modifiche delle patch (a meno che il mittente non sia anche il - manutentore di quell'area del kernel) e in CC: alla lista di discussione - linux-kernel. - - La commissione per la revisione ha 48 ore per dare il proprio ACK o NACK - alle patch. - - Se una patch viene rigettata da un membro della commissione, o un membro - della lista linux-kernel obietta la bontà della patch, sollevando problemi - che i manutentori ed i membri non avevano compreso, allora la patch verrà - rimossa dalla coda. - - Le patch che hanno ricevuto un ACK verranno inviate nuovamente come parte di - un rilascio candidato (-rc) al fine di essere verificate dagli sviluppatori e - dai testatori. - - Solitamente si pubblica solo una -rc, tuttavia se si riscontrano problemi - importanti, alcune patch potrebbero essere modificate o essere scartate, - oppure nuove patch potrebbero essere messe in coda. Dunque, verranno pubblicate - nuove -rc e così via finché non si ritiene che non vi siano più problemi. - - Si può rispondere ad una -rc scrivendo sulla lista di discussione un'email - con l'etichetta "Tested-by:". Questa etichetta verrà raccolta ed aggiunta al - commit rilascio. - - Alla fine del ciclo di revisione il nuovo rilascio -stable conterrà tutte le - patch che erano in coda e sono state verificate. - - Le patch di sicurezza verranno accettate nei sorgenti -stable direttamente - dalla squadra per la sicurezza del kernel, e non passerà per il normale - ciclo di revisione. Contattate la suddetta squadra per maggiori dettagli - su questa procedura. +- Quando i manutentori -stable decidono di fare un ciclo di revisione, le + patch vengono mandate al comitato per la revisione, ai manutentori soggetti + alle modifiche delle patch (a meno che il mittente non sia anche il + manutentore di quell'area del kernel) e in CC: alla lista di discussione + linux-kernel. +- La commissione per la revisione ha 48 ore per dare il proprio ACK o NACK + alle patch. +- Se una patch viene rigettata da un membro della commissione, o un membro + della lista linux-kernel obietta la bontà della patch, sollevando problemi + che i manutentori ed i membri non avevano compreso, allora la patch verrà + rimossa dalla coda. +- Le patch che hanno ricevuto un ACK verranno inviate nuovamente come parte di + un rilascio candidato (-rc) al fine di essere verificate dagli sviluppatori e + dai testatori. +- Solitamente si pubblica solo una -rc, tuttavia se si riscontrano problemi + importanti, alcune patch potrebbero essere modificate o essere scartate, + oppure nuove patch potrebbero essere messe in coda. Dunque, verranno pubblicate + nuove -rc e così via finché non si ritiene che non vi siano più problemi. +- Si può rispondere ad una -rc scrivendo sulla lista di discussione un'email + con l'etichetta "Tested-by:". Questa etichetta verrà raccolta ed aggiunta al + commit rilascio. +- Alla fine del ciclo di revisione il nuovo rilascio -stable conterrà tutte le + patch che erano in coda e sono state verificate. +- Le patch di sicurezza verranno accettate nei sorgenti -stable direttamente + dalla squadra per la sicurezza del kernel, e non passerà per il normale + ciclo di revisione. Contattate la suddetta squadra per maggiori dettagli + su questa procedura. Sorgenti -------- - - La coda delle patch, sia quelle già applicate che in fase di revisione, - possono essere trovate al seguente indirizzo: +- La coda delle patch, sia quelle già applicate che in fase di revisione, + possono essere trovate al seguente indirizzo: - https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git + https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git - - Il rilascio definitivo, e marchiato, di tutti i kernel stabili può essere - trovato in rami distinti per versione al seguente indirizzo: +- Il rilascio definitivo, e marchiato, di tutti i kernel stabili può essere + trovato in rami distinti per versione al seguente indirizzo: - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git - - I rilasci candidati di tutti i kernel stabili possono essere trovati al - seguente indirizzo: +- I rilasci candidati di tutti i kernel stabili possono essere trovati al + seguente indirizzo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/ - - .. warning:: - I sorgenti -stable-rc sono un'istantanea dei sorgenti stable-queue e - subirà frequenti modifiche, dunque verrà anche trapiantato spesso. - Dovrebbe essere usato solo allo scopo di verifica (per esempio in un - sistema di CI) + .. warning:: + I sorgenti -stable-rc sono un'istantanea dei sorgenti stable-queue e + subirà frequenti modifiche, dunque verrà anche trapiantato spesso. + Dovrebbe essere usato solo allo scopo di verifica (per esempio in un + sistema di CI) Comitato per la revisione ------------------------- - - Questo comitato è fatto di sviluppatori del kernel che si sono offerti - volontari per questo lavoro, e pochi altri che non sono proprio volontari. +- Questo comitato è fatto di sviluppatori del kernel che si sono offerti + volontari per questo lavoro, e pochi altri che non sono proprio volontari. diff --git a/Documentation/translations/it_IT/process/submitting-patches.rst b/Documentation/translations/it_IT/process/submitting-patches.rst index 4c6a276bdc08..a7252e73937a 100644 --- a/Documentation/translations/it_IT/process/submitting-patches.rst +++ b/Documentation/translations/it_IT/process/submitting-patches.rst @@ -106,9 +106,29 @@ do frotz" piuttosto che "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy to do frotz", come se steste dando ordini al codice di cambiare il suo comportamento. +Se volete far riferimento a uno specifico commit, non usate solo +l'identificativo SHA-1. Per cortesia, aggiungete anche la breve riga +riassuntiva del commit per rendere la chiaro ai revisori l'oggetto. +Per esempio:: + + Commit e21d2170f36602ae2708 ("video: remove unnecessary + platform_set_drvdata()") removed the unnecessary + platform_set_drvdata(), but left the variable "dev" unused, + delete it. + +Dovreste anche assicurarvi di usare almeno i primi 12 caratteri +dell'identificativo SHA-1. Il repositorio del kernel ha *molti* oggetti e +questo rende possibile la collisione fra due identificativi con pochi +caratteri. Tenete ben presente che anche se oggi non ci sono collisioni con il +vostro identificativo a 6 caratteri, potrebbero essercene fra 5 anni da oggi. + Se ci sono delle discussioni, o altre informazioni d'interesse, che fanno riferimento alla patch, allora aggiungete l'etichetta 'Link:' per farvi -riferimento. Per esempio, se la vostra patch corregge un baco potete aggiungere +riferimento. Se la patch è il risultato di una discussione avvenuta +precedentemente o di un documento sul presente sul web, allora fatevi +riferimento. + +Per esempio, se la vostra patch corregge un baco potete aggiungere quest'etichetta per fare riferimento ad un rapporto su una lista di discussione o un *bug tracker*. Un altro esempio; potete usare quest'etichetta per far riferimento ad una discussione precedentemente avvenuta su una lista di @@ -129,21 +149,16 @@ Tuttavia, provate comunque a dare una spiegazione comprensibile anche senza accedere alle fonti esterne. Inoltre, riassumente i punti più salienti che hanno condotto all'invio della patch. -Se volete far riferimento a uno specifico commit, non usate solo -l'identificativo SHA-1. Per cortesia, aggiungete anche la breve riga -riassuntiva del commit per rendere la chiaro ai revisori l'oggetto. -Per esempio:: +Se il collegamento indirizza verso un rapporto su un baco risolto dalla patch, +allora usate l'etichetta "Closes:":: - Commit e21d2170f36602ae2708 ("video: remove unnecessary - platform_set_drvdata()") removed the unnecessary - platform_set_drvdata(), but left the variable "dev" unused, - delete it. + Closes: https://example.com/issues/1234 optional-other-stuff -Dovreste anche assicurarvi di usare almeno i primi 12 caratteri -dell'identificativo SHA-1. Il repositorio del kernel ha *molti* oggetti e -questo rende possibile la collisione fra due identificativi con pochi -caratteri. Tenete ben presente che anche se oggi non ci sono collisioni con il -vostro identificativo a 6 caratteri, potrebbero essercene fra 5 anni da oggi. +Alcune piattaforme di tracciamento di bachi hanno la capacità di chiudere +automaticamente il problema se l'etichetta è presente nel messaggio. Alcuni +automatismi che monitorano la liste di discussione possono anche tracciare +queste etichette e intraprendere azioni. Piattaforme private e URL invalidi sono +proibiti. Se la vostra patch corregge un baco in un commit specifico, per esempio avete trovato un problema usando ``git bisect``, per favore usate l'etichetta @@ -237,13 +252,19 @@ nella vostra patch. 5) Selezionate i destinatari della vostra patch ----------------------------------------------- -Dovreste sempre inviare una copia della patch ai manutentori dei sottosistemi -interessati dalle modifiche; date un'occhiata al file MAINTAINERS e alla storia -delle revisioni per scoprire chi si occupa del codice. Lo script -scripts/get_maintainer.pl può esservi d'aiuto (passategli il percorso alle -vostre patch). Se non riuscite a trovare un manutentore per il sottosistema su -cui state lavorando, allora Andrew Morton (akpm@linux-foundation.org) sarà la -vostra ultima possibilità. +Dovreste sempre inviare una copia della patch ai manutentori e alle liste di +discussione dei sottosistemi interessati dalle modifiche; date un'occhiata al +file MAINTAINERS e alla storia delle revisioni per scoprire chi si occupa del +codice. Lo script scripts/get_maintainer.pl può esservi d'aiuto (passategli il +percorso alle vostre patch). Se non riuscite a trovare un manutentore per il +sottosistema su cui state lavorando, allora Andrew Morton +(akpm@linux-foundation.org) sarà la vostra ultima possibilità. + +La lista linux-kernel@vger.kernel.org dovrebbe essere usata per l'invio di tutte +le patch, ma il volume ha raggiunto un livello tale d'aver spinto alcuni +sviluppatori a non seguirla più. Dunque, per favore, evitate di inviare messaggi +scorrelati al tema della lista o a persone che non dovrebbero essere +interessate all'argomento. Normalmente, dovreste anche scegliere una lista di discussione a cui inviare la vostra serie di patch. La lista di discussione linux-kernel@vger.kernel.org @@ -343,7 +364,8 @@ questo caso, rispondete con educazione e concentratevi sul problema che hanno evidenziato. Quando inviate una versione successiva ricordatevi di aggiungere un ``patch changelog`` alla email di intestazione o ad ogni singola patch spiegando le differenze rispetto a sottomissioni precedenti (vedere -:ref:`it_the_canonical_patch_format`). +:ref:`it_the_canonical_patch_format`). Aggiungete a CC tutte le persone che +vi hanno fornito dei commenti per notificarle di eventuali nuove versioni. Leggete Documentation/translations/it_IT/process/email-clients.rst per le raccomandazioni sui programmi di posta elettronica e l'etichetta da usare @@ -385,10 +407,10 @@ Dopo che avete inviato le vostre modifiche, siate pazienti e aspettate. I revisori sono persone occupate e potrebbero non ricevere la vostra patch immediatamente. -Un tempo, le patch erano solite scomparire nel vuoto senza alcun commento, -ma ora il processo di sviluppo funziona meglio. Dovreste ricevere commenti -in una settimana o poco più; se questo non dovesse accadere, assicuratevi di -aver inviato le patch correttamente. Aspettate almeno una settimana prima di +Un tempo, le patch erano solite scomparire nel vuoto senza alcun commento, ma +ora il processo di sviluppo funziona meglio. Dovreste ricevere commenti in poche +settimane (tipicamente 2 o 3); se questo non dovesse accadere, assicuratevi di +aver inviato le patch correttamente. Aspettate almeno una settimana prima di rinviare le modifiche o sollecitare i revisori - probabilmente anche di più durante la finestra d'integrazione. @@ -552,6 +574,10 @@ e si spera che questo possa ispirarli ad aiutarci nuovamente in futuro. Rammentate che se il baco è stato riportato in privato, dovrete chiedere il permesso prima di poter utilizzare l'etichetta Reported-by. Questa etichetta va usata per i bachi, dunque non usatela per richieste di nuove funzionalità. +Questa etichetta dovrebbe essere seguita da quella Closes: con un indirizzo al +rapporto, a meno che questo non sia disponibile sul web. L'etichetta Link: può +essere usata in alternativa a Closes: se la patch corregge solo in parte il +problema riportato nel rapporto. L'etichetta Tested-by: indica che la patch è stata verificata con successo (su un qualche sistema) dalla persona citata. Questa etichetta informa i @@ -808,6 +834,63 @@ giungla di riferimenti all'interno dei programmi di posta. Se un collegamento ad una versione precedente di una serie di patch (per esempio, potete usarlo per l'email introduttiva alla serie). +Fornire informazioni circa i sorgenti +------------------------------------- + +Quando gli altri sviluppatori ricevono le vostre patch e iniziano il processo di +revisione, è assolutamente necessario che sappiano qual è il commit/ramo di base +su cui si base il vostro lavoro: considerate l'enorme quantità di sorgenti dei +manutentori presenti al giorno d'oggi. Si noti ancora una volta la voce **T:** +nel file MAINTAINERS spiegato sopra. + +Questo è ancora più importante per i processi automatizzati di CI che tentano di +eseguire una serie di test per stabilire la qualità del codice prima che il +manutentore inizi la revisione. + +Se si usa ``git format-patch`` per generare le patch, si possono includere +automaticamente le informazioni sull'albero di base nell'invio usando il flag +``--base``. Il modo più semplice e comodo di usare questa opzione è con i rami +topici:: + + $ git checkout -t -b my-topical-branch master + Branch 'my-topical-branch' set up to track local branch 'master'. + Switched to a new branch 'my-topical-branch' + + [perform your edits and commits] + + $ git format-patch --base=auto --cover-letter -o outgoing/ master + outgoing/0000-cover-letter.patch + outgoing/0001-First-Commit.patch + outgoing/... + +Aprendo ``outgoing/0000-cover-letter.patch`` per la modifica, si noterà +che ha ``base-commit:`` in fondo, questo fornisce al revisore e agli +strumenti CI informazioni sufficienti per eseguire correttamente ``git am`` +senza preoccuparsi dei conflitti:: + + $ git checkout -b patch-review [base-commit-id] + Switched to a new branch 'patch-review' + $ git am patches.mbox + Applying: First Commit + Applying: ... + +Consultate ``man git-format-patch`` per maggiori informazioni circa questa +opzione. + +.. note:: + + L'opzione ``--base`` fu introdotta con git versione 2.9.0 + +Se non si usa git per produrre le patch, si può comunque includere +``base-commit`` per indicare l'hash del commit dei sorgenti su cui si basa il +lavoro. Dovreste aggiungerlo nella lettera di accompagnamento o nella prima +patch della serie e dovrebbe essere collocato sotto la riga ``---`` o in fondo a +tutti gli altri contenuti, subito prima della vostra firma e-mail. + +Assicuratevi che il commit si basi su sorgenti ufficiali del +manutentore/mainline e non su sorgenti interni, accessibile solo a voi, +altrimenti sarebbe inutile. + Riferimenti ----------- diff --git a/Documentation/translations/sp_SP/index.rst b/Documentation/translations/sp_SP/index.rst index 274ef4ad96b9..aae7018b0d1a 100644 --- a/Documentation/translations/sp_SP/index.rst +++ b/Documentation/translations/sp_SP/index.rst @@ -78,3 +78,4 @@ Traducciones al español process/index wrappers/memory-barriers + scheduler/index diff --git a/Documentation/translations/sp_SP/process/coding-style.rst b/Documentation/translations/sp_SP/process/coding-style.rst index b5a84df44cea..025223be9706 100644 --- a/Documentation/translations/sp_SP/process/coding-style.rst +++ b/Documentation/translations/sp_SP/process/coding-style.rst @@ -754,7 +754,7 @@ código automáticamente, y revisar archivos completos para detectar errores de estilo del código, errores tipográficos y posibles mejoras. También es útil para ordenar ``#includes``, para alinear variables/macros, para redistribuir texto y otras tareas similares. Vea el archivo -:ref:`Documentation/process/clang-format.rst <clangformat>` para más +:ref:`Documentation/dev-tools/clang-format.rst <clangformat>` para más detalles. 10) Archivos de configuración de Kconfig diff --git a/Documentation/translations/sp_SP/process/index.rst b/Documentation/translations/sp_SP/process/index.rst index 4892159310ff..adb2cc845928 100644 --- a/Documentation/translations/sp_SP/process/index.rst +++ b/Documentation/translations/sp_SP/process/index.rst @@ -29,3 +29,4 @@ submit-checklist howto development-process + maintainer-kvm-x86 diff --git a/Documentation/translations/sp_SP/process/magic-number.rst b/Documentation/translations/sp_SP/process/magic-number.rst index 32a99aac2f6c..beb4b4c1de11 100644 --- a/Documentation/translations/sp_SP/process/magic-number.rst +++ b/Documentation/translations/sp_SP/process/magic-number.rst @@ -1,6 +1,6 @@ .. include:: ../disclaimer-sp.rst -:Original: :ref:`Documentation/process/magic-number.rst <magicnumbers>` +:Original: :ref:`Documentation/staging/magic-number.rst <magicnumbers>` :Translator: Carlos Bilbao <carlos.bilbao.osdev@gmail.com> .. _sp_magicnumbers: diff --git a/Documentation/translations/sp_SP/process/maintainer-kvm-x86.rst b/Documentation/translations/sp_SP/process/maintainer-kvm-x86.rst new file mode 100644 index 000000000000..053b6a06db01 --- /dev/null +++ b/Documentation/translations/sp_SP/process/maintainer-kvm-x86.rst @@ -0,0 +1,465 @@ +.. include:: ../disclaimer-sp.rst + +:Original: Documentation/process/maintainer-kvm-x86.rst +:Translator: Juan Embid <jembid@ucm.es> + +KVM x86 +======= + +Prólogo +-------- +KVM se esfuerza por ser una comunidad acogedora; las contribuciones de los +recién llegados son valoradas e incentivadas. Por favor, no se desanime ni +se sienta intimidado por la extensión de este documento y las numerosas +normas/directrices que contiene. Todos cometemos errores y todos hemos sido +principiantes en algún momento. Mientras haga un esfuerzo honesto por +seguir las directrices de KVM x86, sea receptivo a los comentarios, y +aprenda de los errores que cometa, será recibido con los brazos abiertos, +no con antorchas y horcas. + +TL;DR +----- +Las pruebas son obligatorias. Sea coherente con los estilos y patrones +establecidos. + +Árboles +------- +KVM x86 se encuentra actualmente en un período de transición de ser parte +del árbol principal de KVM, a ser "sólo otra rama de KVM". Como tal, KVM +x86 está dividido entre el árbol principal de KVM, +``git.kernel.org/pub/scm/virt/kvm/kvm.git``, y un árbol específico de KVM +x86, ``github.com/kvm-x86/linux.git``. + +Por lo general, las correcciones para el ciclo en curso se aplican +directamente al árbol principal de KVM, mientras que todo el desarrollo +para el siguiente ciclo se dirige a través del árbol de KVM x86. En el +improbable caso de que una corrección para el ciclo actual se dirija a +través del árbol KVM x86, se aplicará a la rama ``fixes`` antes de llegar +al árbol KVM principal. + +Tenga en cuenta que se espera que este periodo de transición dure bastante +tiempo, es decir, que será el statu quo en un futuro previsible. + +Ramas +~~~~~ +El árbol de KVM x86 está organizado en múltiples ramas por temas. El +propósito de utilizar ramas temáticas más específicas es facilitar el +control de un área de desarrollo, y para limitar los daños colaterales de +errores humanos y/o commits con errores, por ejemplo, borrar el commit HEAD +de una rama temática no tiene impacto en los hashes SHA1 de otros commit +en en camino, y tener que rechazar una solicitud de pull debido a errores +retrasa sólo esa rama temática. + +Todas las ramas temáticas, excepto ``next`` y ``fixes``, se agrupan en +``next`` a través de un Cthulhu merge en función de las necesidades, es +decir, cuando se actualiza una rama temática. Como resultado, los push +forzados a ``next`` son comunes. + +Ciclo de Vida +~~~~~~~~~~~~~ +Las correcciones dirigidas a la versión actual, también conocida como +mainline, suelen aplicarse directamente al árbol principal de KVM, es +decir, no pasan por el árbol x86 de KVM. + +Los cambios dirigidos a la siguiente versión se dirigen a través del árbol +KVM x86. Se envían pull requests (de KVM x86 a KVM main) para cada rama +temática de KVM x86, normalmente la semana antes de que Linus abra la +ventana de fusión, por ejemplo, la semana siguiente a rc7 para las +versiones "normales". Si todo va bien, las ramas temáticas son subidas en +el pull request principal de KVM enviado durante la ventana de fusión de +Linus. + +El árbol de KVM x86 no tiene su propia ventana de fusión oficial, pero hay +un cierre suave alrededor de rc5 para nuevas características, y un cierre +suave alrededor de rc6 para correcciones (para la próxima versión; fíjese +más arriba para las correcciones dirigidas a la versión actual). + +Cronología +~~~~~~~~~~ +Normalmente, los envíos se revisan y aplican en orden FIFO, con cierto +margen de maniobra en función del tamaño de la serie, los parches que están +"calientes en caché", etc. Correcciones, especialmente para la versión +actual y/o árboles estables, consiguen saltar la cola. Los parches que se +lleven a través de un árbol que no sea KVM (la mayoría de las veces a +través del árbol de consejos) y/o que tengan otros acks/revisiones también +saltan la cola hasta cierto punto. + +Tenga en cuenta que la mayor parte de la revisión se realiza entre rc1 y +rc6, más o menos. El periodo entre la rc6 y la siguiente rc1 se utiliza +para ponerse al día en otras tareas, es decir, la falta de envíos durante +este periodo no es inusual. + +Los pings para obtener una actualización del estado son bienvenidos, pero +tenga en cuenta el calendario del ciclo de publicación actual y tenga +expectativas realistas. Si está haciendo ping para la aceptación, es decir, +no sólo para obtener comentarios o una actualización, por favor haga todo +lo posible, dentro de lo razonable, para asegurarse de que sus parches +están listos para ser fusionados. Los pings sobre series que rompen la +compilación o fallan en las pruebas provocan el descontento de los +mantenedores. + +Desarrollo +----------- + +Árbol base/Rama +~~~~~~~~~~~~~~~ +Las correcciones dirigidas a la versión actual, también conocida como +mainline, deben basarse en +``git://git.kernel.org/pub/scm/virt/kvm/kvm.git master``. Tenga en cuenta +que las correcciones no garantizan automáticamente la inclusión en la +versión actual. No hay una regla única, pero normalmente sólo las +correcciones de errores urgentes, críticos y/o introducidos en la versión +actual deberían incluirse en la versión actual. + +Todo lo demás debería basarse en ``kvm-x86/next``, es decir, no hay +necesidad de seleccionar una rama temática específica como base. Si hay +conflictos y/o dependencias entre ramas, es trabajo del mantenedor +resolverlos. + +La única excepción al uso de ``kvm-x86/next`` como base es si un +parche/serie es una serie multi-arquitectura, es decir, tiene +modificaciones no triviales en el código común de KVM y/o tiene cambios más +que superficiales en el código de otras arquitecturas. Los parches/series +multi-arquitectura deberían basarse en un punto común y estable en la +historia de KVM, por ejemplo, la versión candidata en la que se basa +``kvm-x86 next``. Si no está seguro de si un parche/serie es realmente +multiarquitectura, sea precavido y trátelo como multiarquitectura, es +decir, utilice una base común. + +Estilo del codigo +~~~~~~~~~~~~~~~~~~~~~~ +Cuando se trata de estilo, nomenclatura, patrones, etc., la coherencia es +la prioridad número uno en KVM x86. Si todo lo demás falla, haga coincidir +lo que ya existe. + +Con algunas advertencias que se enumeran a continuación, siga las +recomendaciones de los responsables del árbol de consejos +:ref:`maintainer-tip-coding-style`, ya que los parches/series a menudo +tocan tanto archivos x86 KVM como no KVM, es decir, llaman la atención de +los mantenedores de KVM *y* del árbol de consejos. + +El uso del abeto inverso, también conocido como árbol de Navidad inverso o +árbol XMAS inverso, para las declaraciones de variables no es estrictamente +necesario, aunque es preferible. + +Excepto para unos pocos apuntes especiales, no utilice comentarios +kernel-doc para las funciones. La gran mayoría de las funciones "públicas" +de KVM no son realmente públicas, ya que están destinadas únicamente al +consumo interno de KVM (hay planes para privatizar las cabeceras y +exportaciones de KVM para reforzar esto). + +Comentarios +~~~~~~~~~~~ +Escriba los comentarios en modo imperativo y evite los pronombres. Utilice +los comentarios para ofrecer una visión general de alto nivel del código +y/o para explicar por qué el código hace lo que hace. No reitere lo que el +código hace literalmente; deje que el código hable por sí mismo. Si el +propio código es inescrutable, los comentarios no servirán de nada. + +Referencias SDM y APM +~~~~~~~~~~~~~~~~~~~~~~ +Gran parte de la base de código de KVM está directamente vinculada al +comportamiento de la arquitectura definido en El Manual de Desarrollo de +Software (SDM) de Intel y el Manual del Programador de Arquitectura (APM) +de AMD. El uso de "SDM de Intel" y "APM de AMD", o incluso sólo "SDM" o +"APM", sin contexto adicional es correcto. + +No haga referencia a secciones específicas, tablas, figuras, etc. por su +número, especialmente en los comentarios. En su lugar, si es necesario +(véase más abajo), copie y pegue el fragmento correspondiente y haga +referencia a las secciones/tablas/figuras por su nombre. Los diseños del +SDM y el APM cambian constantemente, por lo que los números/etiquetas no +son estables. + +En general, no haga referencia explícita ni copie-pegue del SDM o APM en +los comentarios. Con pocas excepciones, KVM *debe* respetar el +comportamiento de la arquitectura, por lo que está implícito que el +comportamiento de KVM está emulando el comportamiento de SDM y/o APM. Tenga +en cuenta que hacer referencia al SDM/APM en los registros de cambios para +justificar el cambio y proporcionar contexto es perfectamente correcto y +recomendable. + +Shortlog +~~~~~~~~ +El formato de prefijo más recomendable es ``KVM: <topic>:``, donde +``<topic>`` es uno de los siguientes:: + +- x86 +- x86/mmu +- x86/pmu +- x86/xen +- autocomprobaciones +- SVM +- nSVM +- VMX +- nVMX + +**¡NO use x86/kvm!** ``x86/kvm`` se usa exclusivamente para cambios de +Linux virtualizado por KVM, es decir, para arch/x86/kernel/kvm.c. No use +nombres de archivos o archivos completos como prefijo de asunto/shortlog. + +Tenga en cuenta que esto no coincide con las ramas temáticas (las ramas +temáticas se preocupan mucho más por los conflictos de código). + +Todos los nombres distinguen entre mayúsculas y minúsculas. ``KVM: x86:`` +es correcto, ``kvm: vmx:`` no lo es. + +Escriba en mayúsculas la primera palabra de la descripción condensada del +parche, pero omita la puntuación final. Por ejemplo:: + + KVM: x86: Corregir una desviación de puntero nulo en function_xyz() + +no:: + + kvm: x86: corregir una desviación de puntero nulo en function_xyz. + +Si un parche afecta a varios temas, recorra el árbol conceptual hasta +encontrar el primer padre común (que suele ser simplemente ``x86``). En +caso de duda, ``git log path/to/file`` debería proporcionar una pista +razonable. + +De vez en cuando surgen nuevos temas, pero le rogamos que inicie un debate +en la lista si desea proponer la introducción de un nuevo tema, es decir, +no se ande con rodeos. + +Consulte :ref:`the_canonical_patch_format` para obtener más información, +con una enmienda: no trate el límite de 70-75 caracteres como un límite +absoluto y duro. En su lugar, utilice 75 caracteres como límite firme, pero +no duro, y 80 caracteres como límite duro. Es decir, deje que el registro +corto sobrepase en algunos caracteres el límite estándar si tiene una buena +razón para hacerlo. + +Registro de cambios +~~~~~~~~~~~~~~~~~~~ +Y lo que es más importante, escriba los registros de cambios en modo +imperativo y evite los pronombres. + +Consulte :ref:`describe_changes` para obtener más información, con una +recomendación: comience con un breve resumen de los cambios reales y +continúe con el contexto y los antecedentes. Nota. Este orden entra en +conflicto directo con el enfoque preferido del árbol de sugerencias. Por +favor, siga el estilo preferido del árbol de sugerencias cuando envíe +parches. que se dirigen principalmente a código arch/x86 que _NO_ es código +KVM. + +KVM x86 prefiere indicar lo que hace un parche antes de entrar en detalles +por varias razones. En primer lugar, el código que realmente se está +cambiando es posiblemente la información más importante, por lo que esa +información debe ser fácil de encontrar. Changelogs que entierran el "qué +está cambiando realmente" en una sola línea después de 3+ párrafos de fondo +hacen muy difícil encontrar esa información. + +Para la revisión inicial, se podría argumentar que "lo que está roto" es +más importante, pero para hojear los registros y la arqueología git, los +detalles escabrosos importan cada vez menos. Por ejemplo, al hacer una +serie de "git blame", los detalles de cada cambio a lo largo del camino son +inútiles, los detalles sólo importan para el culpable. Proporcionar el "qué +ha cambiado" facilita determinar rápidamente si una confirmación puede ser +de interés o no. + +Otra ventaja de decir primero "qué cambia" es que casi siempre es posible +decir "qué cambia" en una sola frase. A la inversa, todo menos los errores +más simples requieren varias frases o párrafos para describir el problema. +Si tanto "qué está cambiando" como "cuál es el fallo" son muy breves, el +orden no importa. Pero si uno es más corto (casi siempre el "qué está +cambiando"), entonces cubrir el más corto primero es ventajoso porque es +menos inconveniente para los lectores/revisores que tienen una preferencia +estricta de orden. Por ejemplo, tener que saltarse una frase para llegar al +contexto es menos doloroso que tener que saltarse tres párrafos para llegar +a "lo que cambia". + +Arreglos +~~~~~~~~ +Si un cambio corrige un error de KVM/kernel, añada una etiqueta Fixes: +incluso si el cambio no necesita ser retroportado a kernels estables, e +incluso si el cambio corrige un error en una versión anterior. + +Por el contrario, si es necesario hacer una corrección, etiquete +explícitamente el parche con "Cc: stable@vger.kernel" (aunque no es +necesario que el correo electrónico incluya Cc: stable); KVM x86 opta por +excluirse del backporting Correcciones: por defecto. Algunos parches +seleccionados automáticamente se retroportan, pero requieren la aprobación +explícita de los mantenedores (busque MANUALSEL). + +Referencias a Funciones +~~~~~~~~~~~~~~~~~~~~~~~ +Cuando se mencione una función en un comentario, registro de cambios o +registro abreviado (o en cualquier otro lugar), utilice el formato +``nombre_de_la_función()``. Los paréntesis proporcionan contexto y +desambiguan la referencia. + +Pruebas +~~~~~~~ +Como mínimo, *todos* los parches de una serie deben construirse limpiamente +para KVM_INTEL=m KVM_AMD=m, y KVM_WERROR=y. Construir todas las +combinaciones posibles de Kconfigs no es factible, pero cuantas más mejor. +KVM_SMM, KVM_XEN, PROVE_LOCKING, y X86_64 son particularmente interesantes. + +También es obligatorio ejecutar las autopruebas y las pruebas unitarias de +KVM (y, como es obvio, las pruebas deben pasar). La única excepción es para +los cambios que tienen una probabilidad insignificante de afectar al +comportamiento en tiempo de ejecución, por ejemplo, parches que sólo +modificar los comentarios. Siempre que sea posible y pertinente, se +recomienda encarecidamente realizar pruebas tanto en Intel como en AMD. Se +recomienda arrancar una máquina virtual real, pero no es obligatorio. + +Para cambios que afecten al código de paginación en la sombra de KVM, es +obligatorio ejecutar con TDP (EPT/NPT) deshabilitado. Para cambios que +afecten al código MMU común de KVM, se recomienda encarecidamente ejecutar +con TDP deshabilitado. Para todos los demás cambios, si el código que se +está modificando depende de y/o interactúa con un parámetro del módulo, es +obligatorio realizar pruebas con la configuración correspondiente. + +Tenga en cuenta que las autopruebas de KVM y las pruebas de unidad de KVM +tienen fallos conocidos. Si sospecha que un fallo no se debe a sus cambios, +verifique que el *exactamente el mismo* fallo se produce con y sin sus +cambios. + +Los cambios que afecten a la documentación de texto reestructurado, es +decir, a los archivos .rst, deben generar htmldocs de forma limpia, es +decir, sin advertencias ni errores. + +Si no puede probar completamente un cambio, por ejemplo, por falta de +hardware, indique claramente qué nivel de pruebas ha podido realizar, por +ejemplo, en la carta de presentación. + +Novedades +~~~~~~~~~ +Con una excepción, las nuevas características *deben* venir con cobertura +de pruebas. Las pruebas específicas de KVM no son estrictamente necesarias, +por ejemplo, si la cobertura se proporciona mediante la ejecución de una +prueba de VM huésped suficientemente habilitada, o ejecutando una +autoprueba de kernel relacionada en una VM, pero en todos los casos se +prefieren las pruebas KVM dedicadas. Los casos de prueba negativos en +particular son obligatorios para la habilitación de nuevas características +de hardware, ya que los flujos de errores y excepciones rara vez se +ejercitan simplemente ejecutando una VM. + +La única excepción a esta regla es si KVM está simplemente anunciando +soporte para un a través de KVM_GET_SUPPORTED_CPUID, es decir, para +instrucciones/funciones que KVM no puede impedir que utilice una VM y +para las que no existe una verdadera habilitación. + +Tenga en cuenta que "nuevas características" no significa sólo "nuevas +características de hardware". Las nuevas funcionalidades que no puedan ser +validadas usando las pruebas existentes de KVM y/o las pruebas unitarias de +KVM deben venir con pruebas. + +Es más que bienvenido el envío de nuevos desarrollos de características sin +pruebas para obtener un feedback temprano, pero tales envíos deben ser +etiquetados como RFC, y la carta de presentación debe indicar claramente +qué tipo de feedback se solicita/espera. No abuse del proceso de RFC; las +RFC no suelen recibir una revisión en profundidad. + +Corrección de Errores +~~~~~~~~~~~~~~~~~~~~~ +Salvo en el caso de fallos "obvios" detectados por inspección, las +correcciones deben ir acompañadas de un reproductor del fallo corregido. En +muchos casos, el reproductor está implícito, por ejemplo, para errores de +compilación y fallos de prueba, pero debe quedar claro para lectores qué es +lo que no funciona y cómo verificar la solución. Se concede cierto margen a +los errores detectados mediante cargas de trabajo/pruebas no públicas, pero +se recomienda encarecidamente que se faciliten pruebas de regresión para +dichos errores. + +En general, las pruebas de regresión son preferibles para cualquier fallo +que no sea trivial de encontrar. Por ejemplo, incluso si el error fue +encontrado originalmente por un fuzzer como syzkaller, una prueba de +regresión dirigida puede estar justificada si el error requiere golpear una +condición de carrera de tipo uno en un millón. + +Recuerde que los fallos de KVM rara vez son urgentes *y* no triviales de +reproducir. Pregúntate si un fallo es realmente el fin del mundo antes de +publicar una corrección sin un reproductor. + +Publicación +----------- + +Enlaces +~~~~~~~ +No haga referencia explícita a informes de errores, versiones anteriores de +un parche/serie, etc. mediante cabeceras ``In-Reply-To:``. Usar +``In-Reply-To:`` se convierte en un lío para grandes series y/o cuando el +número de versiones es alto, y ``In-Reply-To:`` es inútil para cualquiera +que no tenga el mensaje original, por ejemplo, si alguien no recibió un Cc +en el informe de error o si la lista de destinatarios cambia entre +versiones. + +Para enlazar con un informe de error, una versión anterior o cualquier cosa +de interés, utiliza enlaces lore. Para hacer referencia a versiones +anteriores, en general no incluya un Enlace: en el registro de cambios, ya +que no hay necesidad de registrar la historia en git, es decir, ponga el +enlace en la carta de presentación o en la sección que git ignora. +Proporcione un Enlace: formal para los informes de errores y/o discusiones +que condujeron al parche. El contexto de por qué se hizo un cambio es muy +valioso para futuros lectores. + +Basado en Git +~~~~~~~~~~~~~ +Si utilizas la versión 2.9.0 o posterior de git (Googlers, ¡os incluimos a +todos!), utilice ``git format-patch`` con el indicador ``--base`` para +incluir automáticamente la información del árbol base en los parches +generados. + +Tenga en cuenta que ``--base=auto`` funciona como se espera si y sólo si el +upstream de una rama se establece en la rama temática base, por ejemplo, +hará lo incorrecto si su upstream se establece en su repositorio personal +con fines de copia de seguridad. Una solución "automática" alternativa es +derivar los nombres de tus ramas de desarrollo basándose en su KVM x86, e +introdúzcalo en ``--base``. Por ejemplo, ``x86/pmu/mi_nombre_de_rama``, y +luego escribir un pequeño wrapper para extraer ``pmu`` del nombre de la +rama actual para obtener ``--base=x/pmu``, donde ``x`` es el nombre que su +repositorio utiliza para rastrear el remoto KVM x86. + +Tests de Co-Publicación +~~~~~~~~~~~~~~~~~~~~~~~ +Las autopruebas de KVM asociadas a cambios de KVM, por ejemplo, pruebas de +regresión para correcciones de errores, deben publicarse junto con los +cambios de KVM como una única serie. Se aplicarán las reglas estándar del +núcleo para la bisección, es decir, los cambios de KVM que provoquen fallos +en las pruebas se ordenarán después de las actualizaciones de las +autopruebas, y viceversa. Las pruebas que fallan debido a errores de KVM +deben ordenarse después de las correcciones de KVM. + +KVM-unit-tests debería *siempre* publicarse por separado. Las herramientas, +por ejemplo b4 am, no saben que KVM-unit-tests es un repositorio separado y +se confunden cuando los parches de una serie se aplican en diferentes +árboles. Para vincular los parches de KVM-unit-tests a Parches KVM, primero +publique los cambios KVM y luego proporcione un enlace lore Link: al +parche/serie KVM en el parche(s) KVM-unit-tests. + +Notificaciones +~~~~~~~~~~~~~~ +Cuando se acepte oficialmente un parche/serie, se enviará un correo +electrónico de notificación en respuesta a la publicación original (carta +de presentación para series de varios parches). La notificación incluirá el +árbol y la rama temática, junto con los SHA1 de los commits de los parches +aplicados. + +Si se aplica un subconjunto de parches, se indicará claramente en la +notificación. A menos que se indique lo contrario, se sobreentiende que +todos los parches del Las series que no han sido aceptadas necesitan más +trabajo y deben presentarse en una nueva versión. + +Si por alguna razón se retira un parche después de haber sido aceptado +oficialmente, se enviará una respuesta al correo electrónico de +notificación explicando por qué se ha retirado el parche, así como los +pasos siguientes. + +Estabilidad SHA1 +~~~~~~~~~~~~~~~~ +Los SHA1 no son 100% estables hasta que llegan al árbol de Linus. Un SHA1 +es *normalmente* estable una vez que se ha enviado una notificación, pero +ocurren cosas. En la mayoría de los casos, se proporcionará una +actualización del correo electrónico de notificación si se aplica un SHA1 +del parche. Sin embargo, en algunos escenarios, por ejemplo, si todas las +ramas de KVM x86 necesitan ser rebasadas, no se darán notificaciones +individuales. + +Vulnerabilidades +~~~~~~~~~~~~~~~~ +Los fallos que pueden ser explotados por la VM (el "guest") para atacar al +host (kernel o espacio de usuario), o que pueden ser explotados por una VM +anidada a *su* host (L2 atacando a L1), son de particular interés para KVM. +Por favor, siga el protocolo para :ref:`securitybugs` si sospecha que un +fallo puede provocar una filtración de datos, etc. diff --git a/Documentation/translations/sp_SP/scheduler/index.rst b/Documentation/translations/sp_SP/scheduler/index.rst new file mode 100644 index 000000000000..768488d6f001 --- /dev/null +++ b/Documentation/translations/sp_SP/scheduler/index.rst @@ -0,0 +1,8 @@ +.. include:: ../disclaimer-sp.rst + +.. _sp_scheduler_index: + +.. toctree:: + :maxdepth: 1 + + sched-design-CFS diff --git a/Documentation/translations/sp_SP/scheduler/sched-design-CFS.rst b/Documentation/translations/sp_SP/scheduler/sched-design-CFS.rst new file mode 100644 index 000000000000..90a153cad4e8 --- /dev/null +++ b/Documentation/translations/sp_SP/scheduler/sched-design-CFS.rst @@ -0,0 +1,277 @@ +.. include:: ../disclaimer-sp.rst + +:Original: :ref:`Documentation/scheduler/sched-design-CFS.rst <sched_design_CFS>` +:Translator: Sergio González Collado <sergio.collado@gmail.com> + +.. _sp_sched_desing_CFS: + +==================== +Gestor de tareas CFS +==================== + +1. VISIÓN GENERAL +================== + +CFS viene de las siglas en inglés de "Gestor de tareas totalmente justo" +("Completely Fair Scheduler"), y es el nuevo gestor de tareas de escritorio +implementado por Ingo Molnar e integrado en Linux 2.6.23. Es el sustituto de +el previo gestor de tareas SCHED_OTHER. + +Nota: El planificador EEVDF fue incorporado más recientemente al kernel. + +El 80% del diseño de CFS puede ser resumido en una única frase: CFS +básicamente modela una "CPU ideal, precisa y multi-tarea" sobre hardware +real. + +"una CPU multitarea ideal" es una CPU (inexistente :-)) que tiene un 100% +de potencia y que puede ejecutar cualquier tarea exactamente a la misma +velocidad, en paralelo, y cada una a 1/n velocidad. Por ejemplo, si hay dos +tareas ejecutándose, entonces cada una usa un 50% de la potencia --- es decir, +como si se ejecutaran en paralelo. + +En hardware real, se puede ejecutar una única tarea a la vez, así que +se ha usado el concepto de "tiempo de ejecución virtual". El tiempo +de ejecución virtual de una tarea específica cuando la siguiente porción +de ejecución podría empezar en la CPU ideal multi-tarea descrita anteriormente. +En la práctica, el tiempo de ejecución virtual de una tarea es el +tiempo de ejecución real normalizado con respecto al número total de +tareas ejecutándose. + + +2. UNOS CUANTOS DETALLES DE IMPLEMENTACIÓN +=========================================== + +En CFS, el tiempo de ejecución virtual se expresa y se monitoriza por +cada tarea, en su valor de p->se.vruntime (en unidades de nanosegundos). +De este modo, es posible temporizar con precisión y medir el "tiempo +de CPU esperado" que una tarea debería tener. + +Un pequeño detalle: en hardware "ideal", en cualquier momento todas las +tareas pueden tener el mismo valor de p->se.vruntime --- i.e., tareas +se podrían ejecutar simultáneamente y ninguna tarea podría escaparse del +"balance" de la partición "ideal" del tiempo compartido de la CPU. + +La lógica de elección del tareas de CFS se basa en el valor de p->se.vruntime +y por tanto es muy sencilla: siempre intenta ejecutar la tarea con el valor +p->se.vruntime más pequeño (i.e., la tarea que se ha ejecutado menos hasta el +momento). CFS siempre intenta dividir el espacio de tiempo entre tareas +en ejecución tan próximo a la "ejecución multitarea ideal del hardware" como +sea posible. + +El resto del diseño de CFS simplemente se escapa de este simple concepto, +con unos cuantos añadidos como los niveles "nice" ("nice" significa "amable" +en inglés), multi-tarea y varias variantes del algoritmo para identificar +tareas "durmiendo". + + +3. EL ÁRBOL ROJO-NEGRO +======================= + +El diseño de CFS es bastante radical: no utiliza las antiguas estructuras +de datos para las colas de ejecución (en inglés "runqueues"), pero usa una +estructura de árbol rojo-negro (en inglés "red-black tree") ordenado cronológicamente +para construir un línea de ejecución en el futuro, y por eso no tiene ningún +artificio de "cambio de tareas" (algo que previamente era usado por el gestor +anterior y RSDL/SD). + +CFS también mantiene el valor de rq->cfs.min_vruntime, el cual crece +monotónicamente siguiendo el valor más pequeño de vruntime de entre todas +las tareas en la cola de ejecución. La cantidad total de trabajo realizado +por el sistema es monitorizado usado min_vruntime; este valor es usado +para situar las nuevas tareas en la parte izquierda del árbol tanto +como sea posible. + +El valor total de tareas ejecutándose en la cola de ejecución es +contabilizado mediante el valor rq->cfs.load, el cual es la suma de los +de esas tareas que están en la cola de ejecución. + +CFS mantiene un árbol rojo-negro cronológicamente ordenado, donde todas las +tareas que pueden ser ejecutadas están ordenadas por su valor de +p->se.vruntime. CFS selecciona la tarea más hacia la izquierda de este +árbol y la mantiene. Según el sistema continúa, las tareas ejecutadas +se ponen en este árbol más y más hacia la derecha --- lentamente pero +de forma continuada dando una oportunidad a cada tarea de ser la que +está "la más hacia la izquierda" y por tanto obtener la CPU una cantidad +determinista de tiempo. + +Resumiendo, CFS funciona así: ejecuta una tarea un tiempo, y cuando la +tarea se gestiona (o sucede un tic del gestor de tareas) se considera +que el tiempo de uso de la CPU se ha completado, y se añade a +p->se.vruntime. Una vez p->se.vruntime ha aumentado lo suficiente como +para que otra tarea sea "la tarea más hacia la izquierda" del árbol +rojo-negro ordenado cronológicamente esta mantienen (más una cierta pequeña +cantidad de distancia relativa a la tarea más hacia la izquierda para +que no se sobre-reserven tareas y perjudique a la cache), entonces la +nueva tarea "que está a la izquierda del todo", es la que se elige +para que se ejecute, y la tarea en ejecución es interrumpida. + +4. ALGUNAS CARACTERÍSTICAS DE CFS +================================== + +CFS usa una granularidad de nanosegundos y no depende de ningún +jiffie o detalles como HZ. De este modo, el gestor de tareas CFS no tiene +noción de "ventanas de tiempo" de la forma en que tenía el gestor de +tareas previo, y tampoco tiene heurísticos. Únicamente hay un parámetro +central ajustable (se ha de cambiar en CONFIG_SCHED_DEBUG): + + /sys/kernel/debug/sched/base_slice_ns + +El cual puede ser usado para afinar desde el gestor de tareas del "escritorio" +(i.e., bajas latencias) hacia cargas de "servidor" (i.e., bueno con +procesamientos). Su valor por defecto es adecuado para tareas de escritorio. +SCHED_BATCH también es gestionado por el gestor de tareas CFS. + +Debido a su diseño, el gestor de tareas CFS no es proclive a ninguno de los +ataques que existen a día de hoy contra los heurísticos del gestor de tareas: +fiftyp.c, thud.c, chew.c, ring-test.c, massive_intr.c todos trabajan +correctamente y no tienen impacto en la interacción y se comportan de la forma +esperada. + +El gestor de tareas CFS tiene una gestión mucho más firme de los niveles +"nice" y SCHED_BATCH que los previos gestores de tareas: ambos tipos de +tareas están aisladas de forma más eficiente. + +El balanceo de tareas SMP ha sido rehecho/mejorado: el avance por las +colas de ejecución de tareas ha desaparecido del código de balanceo de +carga, y ahora se usan iteradores en la gestión de módulos. El balanceo +del código ha sido simplificado como resultado esto. + +5. Políticas de gestión de tareas +================================== + +CFS implementa tres políticas de gestión de tareas: + + - SCHED_NORMAL (tradicionalmente llamada SCHED_OTHER): Gestión de + tareas que se usan para tareas normales. + + - SCHED_BATCH: No interrumpe tareas tan a menudo como las tareas + normales harían, por eso permite a las tareas ejecutarse durante + ventanas de tiempo mayores y hace un uso más efectivo de las + caches pero al coste de la interactividad. Esto es adecuado + para trabajos de procesado de datos. + + - SCHED_IDLE: Esta política es más débil incluso que nice 19, pero + no es un gestor "idle" para evitar caer en el problema de la + inversión de prioridades que causaría un bloqueo de la máquina + (deadlock). + +SCHED_FIFO/_RR se implementan en sched/rt.c y son específicos de +POSIX. + +El comando chrt de util-linux-ng 2.13.1.1. puede asignar cualquiera de +estas políticas excepto SCHED_IDLE. + + +6. CLASES DE GESTIÓN +===================== + +El nuevo gestor de tareas CFS ha sido diseñado de tal modo para incluir +"clases de gestión", una jerarquía ampliable de módulos que pueden tener +distintas políticas de gestión de tareas. Estos módulos encapsulan los +detalles de las politicas de gestión y son manejadas por el núcleo del +gestor de tareas sin que este tenga que presuponer mucho sobre estas clases. + +sched/fair.c implementa el gestor de tareas CFS descrito antes. + +sched/rt.c implementa la semántica de SCHED_FIFO y SCHED_RR, de una forma +más sencilla que el gestor de tareas anterior. Usa 100 colas de ejecución +(por todos los 100 niveles de prioridad RT, en vez de las 140 que necesitaba +el gestor de tareas anterior) y no necesita las listas de expiración. + +Las clases de gestión de tareas son implementadas por medio de la estructura +sched_class, la cual tiene llamadas a las funciones que deben de llamarse +cuando quiera que ocurra un evento interesante. + +Esta es la lista parcial de llamadas: + + - enqueue_task(...) + + Llamada cuando una tarea entra en el estado de lista para ejecución. + Pone la entidad a ser gestionada (la tarea) en el árbol rojo-negro + e incrementa la variable nr_running. + + - dequeue_task(...) + + Cuando una tarea deja de ser ejecutable, esta función se llama para + mantener a la entidad gestionada fuera del árbol rojo-negor. Esto + decrementa la variable nr_running. + + - yield_task(...) + + Esta función es básicamente desencolar, seguido por encolar, a menos que + sysctl compat_yield esté activado; en ese caso, sitúa la entidad a gestionar + en la parte más hacia la derecha del árbol rojo-negro. + + - check_preempt_curr(...) + + Esta función comprueba si una tarea que ha entrado en el estado de + poder ser ejecutada, podría reemplazar a la tarea que actualmente + se esté ejecutando. + + - pick_next_task(...) + + Esta función elige la tarea más apropiada para ser ejecutada a continuación. + + - set_curr_task(...) + + Esta función se llama cuando una tarea cambia su clase de gestión o + cambia su grupo de tareas. + + - task_tick(...) + + Esta función es llamada la mayoría de las veces desde la función de tiempo + tick; esto puede llevar a un cambio de procesos. Esto dirige el reemplazo + de las tareas. + + +7. EXTENSIONES DE GRUPOS PARA CFS +================================== + +Normalmente, el gestor de tareas gestiona tareas individuales e intenta +proporcionar una cantidad justa de CPU a cada tarea. Algunas veces, puede +ser deseable agrupar las tareas y proporcionarles una cantidad justa +de tiempo de CPU a cada una de las tareas de ese grupo. Por ejemplo, +podría ser deseable que primero se proporcione una cantidad justa de +tiempo de CPU a cada usuario del sistema y después a cada tarea +que pertenezca a un usuario. + +CONFIG_CGROUP_SCHED destaca en conseguir exactamente eso. Permite a las +tareas ser agrupadas y divide el tiempo de CPU de forma just entre esos +grupos. + +CONFIG_RT_GROUP_SCHED permite agrupar tareas de tiempo real (i.e., +SCHED_FIFO y SCHED_RR). + +CONFIG_FAIR_GROUP_SCHED permite agrupar tareas de CFS (i.e., SCHED_NORMAL y +SCHED_BATCH). + +Estas opciones necesitan CONFIG_CGROUPS para ser definidas, y permitir +al administrador crear grupos arbitrarios de tareas, usando el pseudo +sistema de archivos "cgroup". Vease la documentación para más información +sobre este sistema de archivos: Documentation/admin-guide/cgroup-v1/cgroups.rst + +Cuando CONFIG_FAIR_GROUP_SCHED es definido, un archivo +"cpu.shares" es creado por cada grupo creado usado en el pseudo +sistema de archivos. Véanse por ejemplo los pasos a continuación +para crear grupos de tareas y modificar cuanto comparten de la CPU +usando el pseudo sistema de archivos "cgroup" :: + + # mount -t tmpfs cgroup_root /sys/fs/cgroup + # mkdir /sys/fs/cgroup/cpu + # mount -t cgroup -ocpu none /sys/fs/cgroup/cpu + # cd /sys/fs/cgroup/cpu + + # mkdir multimedia # crear un grupo de tareas "multimedia" + # mkdir browser # crear un grupo de tareas "browser" + + # #Configurar el grupo multimedia para tener el doble de tiempo de CPU + # #que el grupo browser + + # echo 2048 > multimedia/cpu.shares + # echo 1024 > browser/cpu.shares + + # firefox & # Lanzar firefox y moverlo al grupo "browser" + # echo <firefox_pid> > browser/tasks + + # #Lanzar gmplayer (o su programa favorito de reproducción de películas) + # echo <movie_player_pid> > multimedia/tasks diff --git a/Documentation/translations/zh_CN/PCI/pciebus-howto.rst b/Documentation/translations/zh_CN/PCI/pciebus-howto.rst index 65c4301f12cd..c6ffda62af21 100644 --- a/Documentation/translations/zh_CN/PCI/pciebus-howto.rst +++ b/Documentation/translations/zh_CN/PCI/pciebus-howto.rst @@ -124,7 +124,7 @@ pcie_port_service_unregister取代了Linux驱动模型的pci_unregister_driver static struct pcie_port_service_driver root_aerdrv = { .name = (char *)device_name, - .id_table = &service_id[0], + .id_table = service_id, .probe = aerdrv_load, .remove = aerdrv_unload, diff --git a/Documentation/translations/zh_CN/admin-guide/index.rst b/Documentation/translations/zh_CN/admin-guide/index.rst index ac2960da33e6..0db80ab830a0 100644 --- a/Documentation/translations/zh_CN/admin-guide/index.rst +++ b/Documentation/translations/zh_CN/admin-guide/index.rst @@ -68,6 +68,7 @@ Todolist: cpu-load cputopology lockup-watchdogs + numastat unicode sysrq mm/index @@ -109,7 +110,6 @@ Todolist: * module-signing * mono * namespaces/index -* numastat * parport * perf-security * pm/index diff --git a/Documentation/translations/zh_CN/admin-guide/numastat.rst b/Documentation/translations/zh_CN/admin-guide/numastat.rst new file mode 100644 index 000000000000..4d9817b91870 --- /dev/null +++ b/Documentation/translations/zh_CN/admin-guide/numastat.rst @@ -0,0 +1,48 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/admin-guide/numastat.rst +:Translator: Tao Zou <wodemia@linux.alibaba.com> + + +======================= +Numa策略命中/未命中统计 +======================= + +/sys/devices/system/node/node*/numastat + +所有数据的单位都是页面。巨页有独立的计数器。 + +numa_hit、numa_miss和numa_foreign计数器反映了进程是否能够在他们偏好的节点上分配内存。 +如果进程成功在偏好的节点上分配内存则在偏好的节点上增加numa_hit计数，否则在偏好的节点上增 +加numa_foreign计数同时在实际内存分配的节点上增加numa_miss计数。 + +通常，偏好的节点是进程运行所在的CPU的本地节点，但是一些限制可以改变这一行为，比如内存策略， +因此同样有两个基于CPU本地节点的计数器。local_node和numa_hit类似，当在CPU所在的节点上分 +配内存时增加local_node计数，other_node和numa_miss类似，当在CPU所在节点之外的其他节点 +上成功分配内存时增加other_node计数。需要注意，没有和numa_foreign对应的计数器。 + +更多细节内容: + +=============== ============================================================ +numa_hit 一个进程想要从本节点分配内存并且成功。 + +numa_miss 一个进程想要从其他节点分配内存但是最终在本节点完成内存分配。 + +numa_foreign 一个进程想要在本节点分配内存但是最终在其他节点完成内存分配。 + +local_node 一个进程运行在本节点的CPU上并且从本节点上获得了内存。 + +other_node 一个进程运行在其他节点的CPU上但是在本节点上获得了内存。 + +interleave_hit 内存交叉分配策略下想要从本节点分配内存并且成功。 +=============== ============================================================ + +你可以使用numactl软件包（http://oss.sgi.com/projects/libnuma/）中的numastat工具 +来辅助阅读。需要注意，numastat工具目前只在有少量CPU的机器上运行良好。 + +需要注意，在包含无内存节点（一个节点有CPUs但是没有内存）的系统中numa_hit、numa_miss和 +numa_foreign统计数据会被严重曲解。在当前的内核实现中，如果一个进程偏好一个无内存节点（即 +进程正在该节点的一个本地CPU上运行），实际上会从距离最近的有内存节点中挑选一个作为偏好节点。 +结果会导致相应的内存分配不会增加无内存节点上的numa_foreign计数器，并且会扭曲最近节点上的 +numa_hit、numa_miss和numa_foreign统计数据。 diff --git a/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst b/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst index 17b5ce85a90c..3c133a918f30 100644 --- a/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst +++ b/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst @@ -34,6 +34,10 @@ Kgdb内核调试器、QEMU等虚拟机管理程序或基于JTAG的硬件接口 但这通常仅在不依赖内核模块时才有效。有关此模式的更多详细信息，请参阅QEMU文档。 在这种情况下，如果架构支持KASLR，应该在禁用CONFIG_RANDOMIZE_BASE的情况下构建内核。 +- 构建gdb脚本（适用于内核v5.1版本及以上） + + make scripts_gdb + - 启用QEMU/KVM的gdb stub，可以通过如下方式实现 - 在VM启动时，通过在QEMU命令行中添加“-s”参数 diff --git a/Documentation/translations/zh_CN/dev-tools/index.rst b/Documentation/translations/zh_CN/dev-tools/index.rst index fa900f5beb68..c540e4a7d5db 100644 --- a/Documentation/translations/zh_CN/dev-tools/index.rst +++ b/Documentation/translations/zh_CN/dev-tools/index.rst @@ -20,18 +20,22 @@ Documentation/translations/zh_CN/dev-tools/testing-overview.rst testing-overview sparse + kcov gcov kasan - kcov ubsan kmemleak gdb-kernel-debugging Todolist: + - checkpatch - coccinelle + - kmsan - kcsan - kfence - kgdb - kselftest - kunit/index + - ktap + - checkuapi diff --git a/Documentation/translations/zh_CN/dev-tools/kasan.rst b/Documentation/translations/zh_CN/dev-tools/kasan.rst index 2b1e8f74904b..4491ad2830ed 100644 --- a/Documentation/translations/zh_CN/dev-tools/kasan.rst +++ b/Documentation/translations/zh_CN/dev-tools/kasan.rst @@ -235,6 +235,24 @@ slab对象的描述以及关于访问的内存页的信息。 通用KASAN还报告两个辅助调用堆栈跟踪。这些堆栈跟踪指向代码中与对象交互但不直接 出现在错误访问堆栈跟踪中的位置。目前，这包括 call_rcu() 和排队的工作队列。 +CONFIG_KASAN_EXTRA_INFO +~~~~~~~~~~~~~~~~~~~~~~~ + +启用 CONFIG_KASAN_EXTRA_INFO 选项允许 KASAN 记录和报告更多信息。目前支持的 +额外信息包括分配和释放时的 CPU 编号和时间戳。更多的信息可以帮助找到内核错误的原因， +并将错误与其他系统事件关联起来，但代价是用额外的内存来记录更多信息（有关更多 +开销的细节，请参见 CONFIG_KASAN_EXTRA_INFO 选项的帮助文本）。 + +以下为 CONFIG_KASAN_EXTRA_INFO 开启后的报告（仅显示不同部分）:: + + ================================================================== + ... + Allocated by task 134 on cpu 5 at 229.133855s: + ... + Freed by task 136 on cpu 3 at 230.199335s: + ... + ================================================================== + 实施细则 -------- diff --git a/Documentation/translations/zh_CN/dev-tools/testing-overview.rst b/Documentation/translations/zh_CN/dev-tools/testing-overview.rst index c91f9b60f9f1..286ed6b01f65 100644 --- a/Documentation/translations/zh_CN/dev-tools/testing-overview.rst +++ b/Documentation/translations/zh_CN/dev-tools/testing-overview.rst @@ -99,6 +99,8 @@ Documentation/dev-tools/kcov.rst 是能够构建在内核之中，用于在每 参阅 Documentation/dev-tools/kfence.rst * lockdep是一个锁定正确性检测器。参阅 Documentation/locking/lockdep-design.rst +* 运行时确认（Runtime Verification）支持检查给定子系统的特定行为。参阅 + Documentation/trace/rv/runtime-verification.rst。 * 除此以外，在内核中还有一些其它的调试工具，大多数能在 lib/Kconfig.debug 中找到。 diff --git a/Documentation/translations/zh_CN/driver-api/gpio/index.rst b/Documentation/translations/zh_CN/driver-api/gpio/index.rst index 9a6a14162a6c..e4d54724a1b5 100644 --- a/Documentation/translations/zh_CN/driver-api/gpio/index.rst +++ b/Documentation/translations/zh_CN/driver-api/gpio/index.rst @@ -18,8 +18,6 @@ :caption: 目录 :maxdepth: 2 - legacy - Todolist: * intro diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst deleted file mode 100644 index 0faf042001d2..000000000000 --- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst +++ /dev/null @@ -1,618 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -.. include:: ../../disclaimer-zh_CN.rst - -:Original: Documentation/driver-api/gpio/legacy.rst - -:翻译: - - 傅炜 Fu Wei <tekkamanninja@gmail.com> - 司延腾 Yanteng Si <siyanteng@loongson.cn> - -:校译: - - -传统GPIO接口 -============ - -本文档概述了Linux下的GPIO访问公约。 - -这些函数以 gpio_* 作为前缀。其他的函数不允许使用这样的前缀或相关的 -__gpio_* 前缀。 - - -什么是GPIO？ -============ -"通用输入/输出口"(GPIO)是一个灵活的由软件控制的数字信号。他们可 -由多种芯片提供,且对于从事嵌入式和定制硬件的 Linux 开发者来说是 -比较熟悉。每个GPIO 都代表一个连接到特定引脚或球栅阵列(BGA)封装中 -“球珠”的一个位。电路板原理图显示了 GPIO 与外部硬件的连接关系。 -驱动可以编写成通用代码，以使板级启动代码可传递引脚配置数据给驱动。 - -片上系统 (SOC) 处理器对 GPIO 有很大的依赖。在某些情况下,每个 -非专用引脚都可配置为 GPIO,且大多数芯片都最少有一些 GPIO。 -可编程逻辑器件(类似 FPGA) 可以方便地提供 GPIO。像电源管理和 -音频编解码器这样的多功能芯片经常留有一些这样的引脚来帮助那些引脚 -匮乏的 SOC。同时还有通过 I2C 或 SPI 串行总线连接的“GPIO扩展器” -芯片。大多数 PC 的南桥有一些拥有 GPIO 能力的引脚 (只有BIOS -固件才知道如何使用他们)。 - -GPIO 的实际功能因系统而异。通常用法有: - - - 输出值可写 (高电平=1，低电平=0)。一些芯片也有如何驱动这些值的选项, - 例如只允许输出一个值、支持“线与”及其他取值类似的模式(值得注意的是 - “开漏”信号) - - - 输入值可读(1、0)。一些芯片支持引脚在配置为“输出”时回读，这对于类似 - “线与”的情况(以支持双向信号)是非常有用的。GPIO 控制器可能有输入 - 去毛刺/消抖逻辑,这有时需要软件控制。 - - - 输入通常可作为 IRQ 信号,一般是沿触发,但有时是电平触发。这样的 IRQ - 可能配置为系统唤醒事件,以将系统从低功耗状态下唤醒。 - - - 通常一个 GPIO 根据不同产品电路板的需求,可以配置为输入或输出,也有仅 - 支持单向的。 - - - 大部分 GPIO 可以在持有自旋锁时访问,但是通常由串行总线扩展的 GPIO - 不允许持有自旋锁。但某些系统也支持这种类型。 - -对于给定的电路板,每个 GPIO 都用于某个特定的目的,如监控 MMC/SD 卡的 -插入/移除、检测卡的写保护状态、驱动 LED、配置收发器、模拟串行总线、 -复位硬件看门狗、感知开关状态等等。 - - -GPIO 公约 -========= -注意,这个叫做“公约”，因为这不是强制性的，不遵循这个公约是无伤大雅的， -因为此时可移植性并不重要。GPIO 常用于板级特定的电路逻辑,甚至可能 -随着电路板的版本而改变，且不可能在不同走线的电路板上使用。仅有在少数 -功能上才具有可移植性，其他功能是平台特定。这也是由于“胶合”的逻辑造成的。 - -此外，这不需要任何的执行框架，只是一个接口。某个平台可能通过一个简单地 -访问芯片寄存器的内联函数来实现它，其他平台可能通过委托一系列不同的GPIO -控制器的抽象函数来实现它。(有一些可选的代码能支持这种策略的实现,本文档 -后面会介绍，但作为 GPIO 接口的客户端驱动程序必须与它的实现无关。) - -也就是说,如果在他们的平台上支持这个公约，驱动应尽可能的使用它。同时，平台 -必须在 Kconfig 中选择 ARCH_REQUIRE_GPIOLIB 或者 ARCH_WANT_OPTIONAL_GPIOLIB -选项。那些调用标准 GPIO 函数的驱动应该在 Kconfig 入口中声明依赖GENERIC_GPIO。 -当驱动包含文件: - - #include <linux/gpio.h> - -则 GPIO 函数是可用,无论是“真实代码”还是经优化过的语句。如果你遵守 -这个公约，当你的代码完成后，对其他的开发者来说会更容易看懂和维护。 - -注意，这些操作包含所用平台的 I/O 屏障代码，驱动无须显式地调用他们。 - - -标识 GPIO ---------- - -GPIO 是通过无符号整型来标识的,范围是 0 到 MAX_INT。保留“负”数 -用于其他目的,例如标识信号“在这个板子上不可用”或指示错误。未接触底层 -硬件的代码会忽略这些整数。 - -平台会定义这些整数的用法,且通常使用 #define 来定义 GPIO，这样 -板级特定的启动代码可以直接关联相应的原理图。相对来说，驱动应该仅使用 -启动代码传递过来的 GPIO 编号，使用 platform_data 保存板级特定 -引脚配置数据 (同时还有其他须要的板级特定数据)，避免可能出现的问题。 - -例如一个平台使用编号 32-159 来标识 GPIO,而在另一个平台使用编号0-63 -标识一组 GPIO 控制器,64-79标识另一类 GPIO 控制器,且在一个含有 -FPGA 的特定板子上使用 80-95。编号不一定要连续,那些平台中，也可以 -使用编号2000-2063来标识一个 I2C 接口的 GPIO 扩展器中的 GPIO。 - -如果你要初始化一个带有无效 GPIO 编号的结构体,可以使用一些负编码 -(如"-EINVAL")，那将使其永远不会是有效。来测试这样一个结构体中的编号 -是否关联一个 GPIO，你可使用以下断言:: - - int gpio_is_valid(int number); - -如果编号不存在，则请求和释放 GPIO 的函数将拒绝执行相关操作(见下文)。 -其他编号也可能被拒绝,比如一个编号可能存在，但暂时在给定的电路上不可用。 - -一个平台是否支持多个 GPIO 控制器为平台特定的实现问题，就像是否可以 -在 GPIO 编号空间中有“空洞”和是否可以在运行时添加新的控制器一样。 -这些问题会影响其他事情，包括相邻的 GPIO 编号是否存在等。 - -使用 GPIO ---------- - -对于一个 GPIO，系统应该做的第一件事情就是通过 gpio_request() -函数分配它，见下文。 - -接下来是设置I/O方向，这通常是在板级启动代码中为所使用的 GPIO 设置 -platform_device 时完成:: - - /* 设置为输入或输出, 返回 0 或负的错误代码 */ - int gpio_direction_input(unsigned gpio); - int gpio_direction_output(unsigned gpio, int value); - -返回值为零代表成功，否则返回一个负的错误代码。这个返回值需要检查，因为 -get/set(获取/设置)函数调用没法返回错误,且有可能是配置错误。通常， -你应该在进程上下文中调用这些函数。然而,对于自旋锁安全的 GPIO，在板子 -启动的早期、进程启动前使用他们也是可以的。 - -对于作为输出的 GPIO，为其提供初始输出值，对于避免在系统启动期间出现 -信号毛刺是很有帮助的。 - -为了与传统的 GPIO 接口兼容, 在设置一个 GPIO 方向时，如果它还未被申请， -则隐含了申请那个 GPIO 的操作(见下文)。这种兼容性正在从可选的 gpiolib -框架中移除。 - -如果这个 GPIO 编码不存在，或者特定的 GPIO 不能用于那种模式，则方向 -设置可能失败。依赖启动固件来正确地设置方向通常是一个坏主意，因为它可能 -除了启动Linux，并没有做更多的验证工作。(同理, 板子的启动代码可能需要 -将这个复用的引脚设置为 GPIO，并正确地配置上拉/下拉电阻。) - - -访问自旋锁安全的 GPIO ---------------------- - -大多数 GPIO 控制器可以通过内存读/写指令来访问。这些指令不会休眠,可以 -安全地在硬(非线程)中断例程和类似的上下文中完成。 - -对于那些 GPIO，使用以下的函数访问:: - - /* GPIO 输入:返回零或非零 */ - int gpio_get_value(unsigned gpio); - - /* GPIO 输出 */ - void gpio_set_value(unsigned gpio, int value); - -GPIO值是布尔值，零表示低电平，非零表示高电平。当读取一个输出引脚的值时， -返回值应该是引脚上的值。这个值不总是和输出值相符，因为存在开漏输出信号和 -输出延迟问题。 - -以上的 get/set 函数无错误返回值，因为之前 gpio_direction_*()应已检查过 -其是否为“无效GPIO”。此外，还需要注意的是并不是所有平台都可以从输出引脚 -中读取数据，对于不能读取的引脚应总返回零。另外，对那些在原子上下文中无法 -安全访问的 GPIO (译者注：因为访问可能导致休眠)使用这些函数是不合适的 -(见下文)。 - -在 GPIO 编号(还有输出、值)为常数的情况下,鼓励通过平台特定的实现来优化 -这两个函数来访问 GPIO 值。这种情况(读写一个硬件寄存器)下只需要几条指令 -是很正常的,且无须自旋锁。这种优化函数比起那些在子程序上花费许多指令的 -函数可以使得模拟接口(译者注:例如 GPIO 模拟 I2C、1-wire 或 SPI)的 -应用(在空间和时间上都)更具效率。 - - -访问可能休眠的 GPIO -------------------- - -某些 GPIO 控制器必须通过基于总线(如 I2C 或 SPI)的消息访问。读或写这些 -GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其反馈。期间需要 -休眠，这不能在 IRQ 例程(中断上下文)中执行。 - -为了访问这种 GPIO,内核定义了一套不同的函数:: - - /* GPIO 输入:返回零或非零 ,可能会休眠 */ - int gpio_get_value_cansleep(unsigned gpio); - - /* GPIO 输出,可能会休眠 */ - void gpio_set_value_cansleep(unsigned gpio, int value); - -访问这样的 GPIO 需要一个允许休眠的上下文，例如线程 IRQ 处理例程，并用以上的 -访问函数替换那些没有 cansleep()后缀的自旋锁安全访问函数。 - -除了这些访问函数可能休眠，且它们操作的 GPIO 不能在硬件 IRQ 处理例程中访问的 -事实，这些处理例程实际上和自旋锁安全的函数是一样的。 - -** 除此之外 ** 调用设置和配置此类 GPIO 的函数也必须在允许休眠的上下文中， -因为它们可能也需要访问 GPIO 控制器芯片 (这些设置函数通常在板级启动代码或者 -驱动探测/断开代码中，所以这是一个容易满足的约束条件。) :: - - gpio_direction_input() - gpio_direction_output() - gpio_request() - - ## gpio_request_one() - - gpio_free() - - - -声明和释放 GPIO ----------------- - -为了有助于捕获系统配置错误,定义了两个函数:: - - /* 申请 GPIO, 返回 0 或负的错误代码. - * 非空标签可能有助于诊断. - */ - int gpio_request(unsigned gpio, const char *label); - - /* 释放之前声明的 GPIO */ - void gpio_free(unsigned gpio); - -将无效的 GPIO 编码传递给 gpio_request()会导致失败，申请一个已使用这个 -函数声明过的 GPIO 也会失败。gpio_request()的返回值必须检查。你应该在 -进程上下文中调用这些函数。然而,对于自旋锁安全的 GPIO,在板子启动的早期、 -进入进程之前是可以申请的。 - -这个函数完成两个基本的目标。一是标识那些实际上已作为 GPIO 使用的信号线， -这样便于更好地诊断;系统可能需要服务几百个可用的 GPIO，但是对于任何一个 -给定的电路板通常只有一些被使用。另一个目的是捕获冲突，查明错误:如两个或 -更多驱动错误地认为他们已经独占了某个信号线,或是错误地认为移除一个管理着 -某个已激活信号的驱动是安全的。也就是说，申请 GPIO 的作用类似一种锁机制。 - -某些平台可能也使用 GPIO 作为电源管理激活信号(例如通过关闭未使用芯片区和 -简单地关闭未使用时钟)。 - -对于 GPIO 使用引脚控制子系统已知的引脚，子系统应该被告知其使用情况； -一个 gpiolib 驱动的 .request()操作应调用 pinctrl_gpio_request()， -而 gpiolib 驱动的 .free()操作应调用 pinctrl_gpio_free()。引脚控制 -子系统允许 pinctrl_gpio_request()在某个引脚或引脚组以复用形式“属于” -一个设备时都成功返回。 - -任何须将 GPIO 信号导向适当引脚的引脚复用硬件的编程应该发生在 GPIO -驱动的 .direction_input()或 .direction_output()函数中，以及 -任何输出 GPIO 值的设置之后。这样可使从引脚特殊功能到 GPIO 的转换 -不会在引脚产生毛刺波形。有时当用一个 GPIO 实现其信号驱动一个非 GPIO -硬件模块的解决方案时，就需要这种机制。 - -某些平台允许部分或所有 GPIO 信号使用不同的引脚。类似的，GPIO 或引脚的 -其他方面也需要配置，如上拉/下拉。平台软件应该在对这些 GPIO 调用 -gpio_request()前将这类细节配置好，例如使用引脚控制子系统的映射表， -使得 GPIO 的用户无须关注这些细节。 - -还有一个值得注意的是在释放 GPIO 前，你必须停止使用它。 - - -注意:申请一个 GPIO 并没有以任何方式配置它，只不过标识那个 GPIO 处于使用 -状态。必须有另外的代码来处理引脚配置(如控制 GPIO 使用的引脚、上拉/下拉)。 -考虑到大多数情况下声明 GPIO 之后就会立即配置它们,所以定义了以下三个辅助函数:: - - /* 申请一个 GPIO 信号, 同时通过特定的'flags'初始化配置, - * 其他和 gpio_request()的参数和返回值相同 - * - */ - int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); - -这里 'flags' 当前定义可指定以下属性: - - * GPIOF_DIR_IN - 配置方向为输入 - * GPIOF_DIR_OUT - 配置方向为输出 - - * GPIOF_INIT_LOW - 在作为输出时,初始值为低电平 - * GPIOF_INIT_HIGH - 在作为输出时,初始值为高电平 - -因为 GPIOF_INIT_* 仅有在配置为输出的时候才存在,所以有效的组合为: - - * GPIOF_IN - 配置为输入 - * GPIOF_OUT_INIT_LOW - 配置为输出,并初始化为低电平 - * GPIOF_OUT_INIT_HIGH - 配置为输出,并初始化为高电平 - -更进一步,为了更简单地声明/释放多个 GPIO,'struct gpio'被引进来封装所有 -这三个领域:: - - struct gpio { - unsigned gpio; - unsigned long flags; - const char *label; - }; - -一个典型的用例:: - - static struct gpio leds_gpios[] = { - { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* 默认开启 */ - { 33, GPIOF_OUT_INIT_LOW, "Green LED" }, /* 默认关闭 */ - { 34, GPIOF_OUT_INIT_LOW, "Red LED" }, /* 默认关闭 */ - { 35, GPIOF_OUT_INIT_LOW, "Blue LED" }, /* 默认关闭 */ - { ... }, - }; - - err = gpio_request_one(31, GPIOF_IN, "Reset Button"); - if (err) - ... - - -GPIO 映射到 IRQ ----------------- - -GPIO 编号是无符号整数;IRQ 编号也是。这些构成了两个逻辑上不同的命名空间 -(GPIO 0 不一定使用 IRQ 0)。你可以通过以下函数在它们之间实现映射:: - - /* 映射 GPIO 编号到 IRQ 编号 */ - int gpio_to_irq(unsigned gpio); - -它们的返回值为对应命名空间的相关编号，或是负的错误代码(如果无法映射)。 -(例如,某些 GPIO 无法做为 IRQ 使用。)以下的编号错误是未经检测的:使用一个 -未通过 gpio_direction_input()配置为输入的 GPIO 编号，或者使用一个 -并非来源于gpio_to_irq()的 IRQ 编号。 - -这两个映射函数可能会在信号编号的加减计算过程上花些时间。它们不可休眠。 - -gpio_to_irq()返回的非错误值可以传递给 request_irq()或者 free_irq()。 -它们通常通过板级特定的初始化代码存放到平台设备的 IRQ 资源中。注意:IRQ -触发选项是 IRQ 接口的一部分，如 IRQF_TRIGGER_FALLING，系统唤醒能力 -也是如此。 - - -模拟开漏信号 ------------- - -有时在只有低电平信号作为实际驱动结果(译者注:多个输出连接于一点，逻辑电平 -结果为所有输出的逻辑与)的时候,共享的信号线需要使用“开漏”信号。(该术语 -适用于 CMOS 管；而 TTL 用“集电极开路”。)一个上拉电阻使信号为高电平。这 -有时被称为“线与”。实际上，从负逻辑(低电平为真)的角度来看，这是一个“线或”。 - -一个开漏信号的常见例子是共享的低电平使能 IRQ 信号线。此外,有时双向数据总线 -信号也使用漏极开路信号。 - -某些 GPIO 控制器直接支持开漏输出，还有许多不支持。当你需要开漏信号，但 -硬件又不直接支持的时候，一个常用的方法是用任何即可作输入也可作输出的 GPIO -引脚来模拟: - - LOW: gpio_direction_output(gpio, 0) ... 这代码驱动信号并覆盖 - 上拉配置。 - - HIGH: gpio_direction_input(gpio) ... 这代码关闭输出,所以上拉电阻 - (或其他的一些器件)控制了信号。 - -如果你将信号线“驱动”为高电平，但是 gpio_get_value(gpio)报告了一个 -低电平(在适当的上升时间后)，你就可以知道是其他的一些组件将共享信号线拉低了。 -这不一定是错误的。一个常见的例子就是 I2C 时钟的延长：一个需要较慢时钟的 -从设备延迟 SCK 的上升沿，而 I2C 主设备相应地调整其信号传输速率。 - -GPIO控制器和引脚控制子系统 --------------------------- - -SOC上的GPIO控制器可能与引脚控制子系统紧密结合，即引脚可以与可选的gpio功 -能一起被其他功能使用。我们已经涵盖了这样的情况，例如一个GPIO控制器需要保 -留一个引脚或通过调用以下任何一个引脚来设置其方向:: - - pinctrl_gpio_request() - pinctrl_gpio_free() - pinctrl_gpio_direction_input() - pinctrl_gpio_direction_output() - -但是，引脚控制子系统是如何将GPIO号码（这是一个全局事项）与某个引脚控制器 -上的某个引脚交叉关联的？ - -这是通过注册引脚的“范围”来实现的，这基本上是交叉参考表。这些描述是在 -Documentation/driver-api/pin-control.rst - -虽然引脚分配完全由引脚控制子系统管理，但gpio（在gpiolib下）仍由gpio驱动 -维护。可能发生的情况是，SoC中的不同引脚范围由不同的gpio驱动器管理。 - -这使得在调用 "pinctrl_gpio_request" 之前，让gpio驱动向pin ctrl子系 -统宣布它们的引脚范围是合理的，以便在使用任何gpio之前要求引脚控制子系统准 -备相应的引脚。 - -为此，gpio控制器可以用引脚控制子系统注册其引脚范围。目前有两种方法：有或 -无DT。 - -关于对DT的支持，请参考 Documentation/devicetree/bindings/gpio/gpio.txt. - -对于非DT支持，用户可以用适当的参数调用gpiochip_add_pin_range()，将一 -系列的gpio引脚注册到引脚控制驱动上。为此，必须将引脚控制设备的名称字符串 -作为参数之一传给这个程序。 - - -这些公约忽略了什么？ -==================== - -这些公约忽略的最大一件事就是引脚复用，因为这属于高度芯片特定的属性且 -没有可移植性。某个平台可能不需要明确的复用信息；有的对于任意给定的引脚 -可能只有两个功能选项；有的可能每个引脚有八个功能选项；有的可能可以将 -几个引脚中的任何一个作为给定的 GPIO。(是的，这些例子都来自于当前运行 -Linux 的系统。) - -在某些系统中,与引脚复用相关的是配置和使能集成的上、下拉模式。并不是所有 -平台都支持这种模式,或者不会以相同的方式来支持这种模式；且任何给定的电路板 -可能使用外置的上拉(或下拉)电阻,这时芯片上的就不应该使用。(当一个电路需要 -5kOhm 的拉动电阻,芯片上的 100 kOhm 电阻就不能做到。)同样的，驱动能力 -(2 mA vs 20 mA)和电压(1.8V vs 3.3V)是平台特定问题,就像模型一样在 -可配置引脚和 GPIO 之间(没)有一一对应的关系。 - -还有其他一些系统特定的机制没有在这里指出，例如上述的输入去毛刺和线与输出 -选项。硬件可能支持批量读或写 GPIO，但是那一般是配置相关的：对于处于同一 -块区(bank)的GPIO。(GPIO 通常以 16 或 32 个组成一个区块，一个给定的 -片上系统一般有几个这样的区块。)某些系统可以通过输出 GPIO 触发 IRQ， -或者从并非以 GPIO 管理的引脚取值。这些机制的相关代码没有必要具有可移植性。 - -当前，动态定义 GPIO 并不是标准的，例如作为配置一个带有某些 GPIO 扩展器的 -附加电路板的副作用。 - -GPIO 实现者的框架（可选） -========================= - -前面提到了，有一个可选的实现框架，让平台使用相同的编程接口，更加简单地支持 -不同种类的 GPIO 控制器。这个框架称为"gpiolib"。 - -作为一个辅助调试功能，如果 debugfs 可用，就会有一个 /sys/kernel/debug/gpio -文件。通过这个框架，它可以列出所有注册的控制器,以及当前正在使用中的 GPIO -的状态。 - - -控制器驱动: gpio_chip ---------------------- - -在框架中每个 GPIO 控制器都包装为一个 "struct gpio_chip"，他包含了 -该类型的每个控制器的常用信息: - - - 设置 GPIO 方向的方法 - - 用于访问 GPIO 值的方法 - - 告知调用其方法是否可能休眠的标志 - - 可选的 debugfs 信息导出方法 (显示类似上拉配置一样的额外状态) - - 诊断标签 - -也包含了来自 device.platform_data 的每个实例的数据：它第一个 GPIO 的 -编号和它可用的 GPIO 的数量。 - -实现 gpio_chip 的代码应支持多控制器实例，这可能使用驱动模型。那些代码要 -配置每个 gpio_chip，并发起gpiochip_add()。卸载一个 GPIO 控制器很少见， -但在必要的时候可以使用 gpiochip_remove()。 - -大部分 gpio_chip 是一个实例特定结构体的一部分，而并不将 GPIO 接口单独 -暴露出来,比如编址、电源管理等。类似编解码器这样的芯片会有复杂的非 GPIO -状态。 - -任何一个 debugfs 信息导出方法通常应该忽略还未申请作为 GPIO 的信号线。 -他们可以使用 gpiochip_is_requested()测试，当这个 GPIO 已经申请过了 -就返回相关的标签，否则返回 NULL。 - - -平台支持 --------- - -为了支持这个框架，一个平台的 Kconfig 文件将会 "select"(选择) -ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB，并让它的 -<asm/gpio.h> 包含 <asm-generic/gpio.h>，同时定义两个方法: -gpio_get_value()、gpio_set_value()。 - -它也应提供一个 ARCH_NR_GPIOS 的定义值，这样可以更好地反映该平台 GPIO -的实际数量,节省静态表的空间。(这个定义值应该包含片上系统内建 GPIO 和 -GPIO 扩展器中的数据。) - -ARCH_REQUIRE_GPIOLIB 意味着 gpiolib 核心在这个构架中将总是编译进内核。 - -ARCH_WANT_OPTIONAL_GPIOLIB 意味着 gpiolib 核心默认关闭,且用户可以 -使能它,并将其编译进内核(可选)。 - -如果这些选项都没被选择,该平台就不通过 GPIO-lib 支持 GPIO,且代码不可以 -被用户使能。 - -以下这些方法的实现可以直接使用框架代码,并总是通过 gpio_chip 调度:: - - #define gpio_get_value __gpio_get_value - #define gpio_set_value __gpio_set_value - -这些定义可以用更理想的实现方法替代，那就是使用经过逻辑优化的内联函数来访问 -基于特定片上系统的 GPIO。例如,若引用的 GPIO (寄存器位偏移)是常量“12”， -读取或设置它可能只需少则两或三个指令，且不会休眠。当这样的优化无法实现时， -那些函数必须使用框架提供的代码，那就至少要几十条指令才可以实现。对于用 GPIO -模拟的 I/O 接口, 如此精简指令是很有意义的。 - -对于片上系统，平台特定代码为片上 GPIO 每个区(bank)定义并注册 gpio_chip -实例。那些 GPIO 应该根据芯片厂商的文档进行编码/标签,并直接和电路板原理图 -对应。他们应该开始于零并终止于平台特定的限制。这些 GPIO(代码)通常从 -arch_initcall()或者更早的地方集成进平台初始化代码，使这些 GPIO 总是可用， -且他们通常可以作为 IRQ 使用。 - -板级支持 --------- - -对于外部 GPIO 控制器(例如 I2C 或 SPI 扩展器、专用芯片、多功能器件、FPGA -或 CPLD)，大多数常用板级特定代码都可以注册控制器设备，并保证他们的驱动知道 -gpiochip_add()所使用的 GPIO 编号。他们的起始编号通常跟在平台特定的 GPIO -编号之后。 - -例如板级启动代码应该创建结构体指明芯片公开的 GPIO 范围，并使用 platform_data -将其传递给每个 GPIO 扩展器芯片。然后芯片驱动中的 probe()例程可以将这个 -数据传递给 gpiochip_add()。 - -初始化顺序很重要。例如，如果一个设备依赖基于 I2C 的(扩展)GPIO，那么它的 -probe()例程就应该在那个 GPIO 有效以后才可以被调用。这意味着设备应该在 -GPIO 可以工作之后才可被注册。解决这类依赖的的一种方法是让这种 gpio_chip -控制器向板级特定代码提供 setup()和 teardown()回调函数。一旦所有必须的 -资源可用之后，这些板级特定的回调函数将会注册设备，并可以在这些 GPIO 控制器 -设备变成无效时移除它们。 - - -用户空间的 Sysfs 接口（可选） -============================= - -使用“gpiolib”实现框架的平台可以选择配置一个 GPIO 的 sysfs 用户接口。 -这不同于 debugfs 接口，因为它提供的是对 GPIO方向和值的控制，而不只显示 -一个GPIO 的状态摘要。此外,它可以出现在没有调试支持的产品级系统中。 - -例如，通过适当的系统硬件文档，用户空间可以知道 GIOP #23 控制 Flash -存储器的写保护(用于保护其中 Bootloader 分区)。产品的系统升级可能需要 -临时解除这个保护：首先导入一个 GPIO，改变其输出状态，然后在重新使能写保护 -前升级代码。通常情况下,GPIO #23 是不会被触及的，并且内核也不需要知道他。 - -根据适当的硬件文档，某些系统的用户空间 GPIO 可以用于确定系统配置数据， -这些数据是标准内核不知道的。在某些任务中，简单的用户空间 GPIO 驱动可能是 -系统真正需要的。 - -注意：标准内核驱动中已经存在通用的“LED 和按键”GPIO 任务，分别是: -"leds-gpio" 和 "gpio_keys"。请使用这些来替代直接访问 GPIO，因为集成在 -内核框架中的这类驱动比你在用户空间的代码更好。 - - -Sysfs 中的路径 --------------- - -在/sys/class/gpio 中有 3 类入口: - - - 用于在用户空间控制 GPIO 的控制接口; - - - GPIOs 本身;以及 - - - GPIO 控制器 ("gpio_chip" 实例)。 - -除了这些标准的文件,还包含“device”符号链接。 - -控制接口是只写的: - - /sys/class/gpio/ - - "export" ... 用户空间可以通过写其编号到这个文件，要求内核导出 - 一个 GPIO 的控制到用户空间。 - - 例如: 如果内核代码没有申请 GPIO #19,"echo 19 > export" - 将会为 GPIO #19 创建一个 "gpio19" 节点。 - - "unexport" ... 导出到用户空间的逆操作。 - - 例如: "echo 19 > unexport" 将会移除使用"export"文件导出的 - "gpio19" 节点。 - -GPIO 信号的路径类似 /sys/class/gpio/gpio42/ (对于 GPIO #42 来说)， -并有如下的读/写属性: - - /sys/class/gpio/gpioN/ - - "direction" ... 读取得到 "in" 或 "out"。这个值通常运行写入。 - 写入"out" 时,其引脚的默认输出为低电平。为了确保无故障运行， - "low" 或 "high" 的电平值应该写入 GPIO 的配置，作为初始输出值。 - - 注意:如果内核不支持改变 GPIO 的方向，或者在导出时内核代码没有 - 明确允许用户空间可以重新配置 GPIO 方向，那么这个属性将不存在。 - - "value" ... 读取得到 0 (低电平) 或 1 (高电平)。如果 GPIO 配置为 - 输出,这个值允许写操作。任何非零值都以高电平看待。 - - 如果引脚可以配置为中断信号，且如果已经配置了产生中断的模式 - （见"edge"的描述），你可以对这个文件使用轮询操作(poll(2))， - 且轮询操作会在任何中断触发时返回。如果你使用轮询操作(poll(2))， - 请在 events 中设置 POLLPRI 和 POLLERR。如果你使用轮询操作 - (select(2))，请在 exceptfds 设置你期望的文件描述符。在 - 轮询操作(poll(2))返回之后，既可以通过 lseek(2)操作读取 - sysfs 文件的开始部分，也可以关闭这个文件并重新打开它来读取数据。 - - "edge" ... 读取得到“none”、“rising”、“falling”或者“both”。 - 将这些字符串写入这个文件可以选择沿触发模式，会使得轮询操作 - (select(2))在"value"文件中返回。 - - 这个文件仅有在这个引脚可以配置为可产生中断输入引脚时，才存在。 - - "active_low" ... 读取得到 0 (假) 或 1 (真)。写入任何非零值可以 - 翻转这个属性的(读写)值。已存在或之后通过"edge"属性设置了"rising" - 和 "falling" 沿触发模式的轮询操作(poll(2))将会遵循这个设置。 - -GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO -开始实现控制的控制器),并有着以下只读属性: - - /sys/class/gpio/gpiochipN/ - - "base" ... 与以上的 N 相同,代表此芯片管理的第一个 GPIO 的编号 - - "label" ... 用于诊断 (并不总是只有唯一值) - - "ngpio" ... 此控制器所管理的 GPIO 数量(而 GPIO 编号从 N 到 - N + ngpio - 1) - -大多数情况下,电路板的文档应当标明每个 GPIO 的使用目的。但是那些编号并不总是 -固定的,例如在扩展卡上的 GPIO会根据所使用的主板或所在堆叠架构中其他的板子而 -有所不同。在这种情况下,你可能需要使用 gpiochip 节点(尽可能地结合电路图)来 -确定给定信号所用的 GPIO 编号。 - - -API参考 -======= - -本节中列出的函数已被废弃。在新的代码中应该使用基于GPIO描述符的API。 diff --git a/Documentation/translations/zh_CN/driver-api/index.rst b/Documentation/translations/zh_CN/driver-api/index.rst index 92ff1b7fc3d3..4050a2fb51c6 100644 --- a/Documentation/translations/zh_CN/driver-api/index.rst +++ b/Documentation/translations/zh_CN/driver-api/index.rst @@ -23,6 +23,7 @@ Linux驱动实现者的API指南 gpio/index io_ordering + phy/index Todolist: @@ -103,7 +104,6 @@ Todolist: * parport-lowlevel * pps * ptp -* phy/index * pwm * pldmfw/index * rfkill diff --git a/Documentation/translations/zh_CN/driver-api/phy/index.rst b/Documentation/translations/zh_CN/driver-api/phy/index.rst new file mode 100644 index 000000000000..2cdce17b74a9 --- /dev/null +++ b/Documentation/translations/zh_CN/driver-api/phy/index.rst @@ -0,0 +1,20 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +PHY 通用框架 +============ + +.. toctree:: + + phy + +Todolist: + +* samsung-usb2 + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/translations/zh_CN/driver-api/phy/phy.rst b/Documentation/translations/zh_CN/driver-api/phy/phy.rst new file mode 100644 index 000000000000..0d7489081b90 --- /dev/null +++ b/Documentation/translations/zh_CN/driver-api/phy/phy.rst @@ -0,0 +1,212 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../../disclaimer-zh_CN.rst + +:Original: Documentation/driver-api/phy/phy.rst + +:翻译: + + 司延腾 Yanteng Si <siyanteng@loongson.cn> + +========= +PHY子系统 +========= + +:作者: Kishon Vijay Abraham I <kishon@ti.com> + +本文档解释了 PHY 的通用框架和提供的API，以及使用方法。 + +简介 +==== + +*PHY* 是物理层的缩写，它被用来把设备连接到一个物理媒介，例如USB控制器 +有一个提供序列化、反序列化、编码、解码和负责获取所需的数据传输速率的 PHY。 +注意，有些USB控制器内嵌了 PHY 的功能，其它的则使用了一个外置的PHY，此外 +使用 PHY 的设备还有无线网、以太网、SATA等（控制器）。 + +创建这个框架的目的是将遍布 Linux 内核的 PHY 驱动程序融入到 drivers/phy， +以增加代码的可复用性，进而提高代码的可维护性。 + +该框架仅适用于使用外部 PHY（PHY 功能未嵌入控制器内）的设备。 + +注册/注销PHY provider +===================== + +PHY provider是指实现一个或多个 PHY 实例的实体。对于 PHY provider 仅 +实现单个 PHY 实例的简单情况，框架在 of_phy_simple_xlate 中提供其自己 +的 of_xlate 实现。如果 PHY provider 实现多个实例，则应提供其自己的 +of_xlate 实现。of_xlate 仅用于 dt 启动情况。 + +:: + + #define of_phy_provider_register(dev, xlate) \ + __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate)) + + #define devm_of_phy_provider_register(dev, xlate) \ + __devm_of_phy_provider_register((dev), NULL, THIS_MODULE, + (xlate)) + +of_phy_provider_register 和 devm_of_phy_provider_register 宏 +可用于注册 phy_provider，它以 device 和 of_xlate 作为参数。对于 dt +启动情况，所有 PHY provider 都应使用上述两个宏之一来注册 PHY provider。 + +与 PHY provider 关联的设备树节点通常包含一组子节点，每个子节点代表一个 +PHY。某些绑定可能会为了上下文和可扩展性将子节点嵌套在特别的层级中，在这种 +情况下，可以使用低级别的 of_phy_provider_register_full() 和 +devm_of_phy_provider_register_full() 宏来覆盖包含子节点的节点。 + +:: + + #define of_phy_provider_register_full(dev, children, xlate) \ + __of_phy_provider_register(dev, children, THIS_MODULE, xlate) + + #define devm_of_phy_provider_register_full(dev, children, xlate) \ + __devm_of_phy_provider_register_full(dev, children, + THIS_MODULE, xlate) + + void devm_of_phy_provider_unregister(struct device *dev, + struct phy_provider *phy_provider); + void of_phy_provider_unregister(struct phy_provider *phy_provider); + +devm_of_phy_provider_unregister 和 of_phy_provider_unregister +可以被用来注销PHY. + +创建PHY +======= + +PHY 驱动程序应创建 PHY，以便其他外围（芯片）控制器能够使用它。PHY 框架 +提供了 2 个 API 来创建 PHY。 + +:: + + struct phy *phy_create(struct device *dev, struct device_node *node, + const struct phy_ops *ops); + struct phy *devm_phy_create(struct device *dev, + struct device_node *node, + const struct phy_ops *ops); + +PHY 驱动程序可以使用上述两个 API 之一，通过传递设备指针和 phy_ops +来创建 PHY。 + +phy_ops 是一组用于执行 PHY 操作（例如 init、exit、power_on 和 +power_off）的函数指针。 + +在 phy_ops 中，PHY provider驱动程序在创建 PHY 后使用 phy_set_drvdata() +设置私有数据，使用 phy_get_drvdata() 获取私有数据。 + +获取对 PHY 的引用 +================= + +控制器必须先获取对 PHY 的引用，然后才能使用 PHY。此框架提供以下 API +来获取对 PHY 的引用。 + +:: + + struct phy *phy_get(struct device *dev, const char *string); + struct phy *devm_phy_get(struct device *dev, const char *string); + struct phy *devm_phy_optional_get(struct device *dev, + const char *string); + struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, + const char *con_id); + struct phy *devm_of_phy_optional_get(struct device *dev, + struct device_node *np, + const char *con_id); + struct phy *devm_of_phy_get_by_index(struct device *dev, + struct device_node *np, + int index); + +phy_get、devm_phy_get 和 devm_phy_optional_get 可用于在 dt +启动的情况下获取 PHY，字符串参数应包含 dt 数据中给出的 phy 名称，在 +非 dt 启动的情况下，它应包含 PHY 的标签。两个 devm_phy_get 在成功 +获取 PHY 后使用 devres 将设备与 PHY 关联。在驱动程序分离时，将在 +devres 数据上调用 release 函数并释放 devres 数据。当 phy 是可选 +的时，应使用 _optional_get 变体。这些函数永远不会返回 -ENODEV，而 +是在找不到 phy 时返回 NULL。一些通用驱动程序（例如 ehci）可能使用 +多个 phy。在这种情况下，devm_of_phy_get 或 devm_of_phy_get_by_index +用于根据名称或索引获取 phy 引用。 + +需要注意的是，NULL 是有效的 phy 引用。NULL phy 上的所有 phy 使用 +者调用都将成为 NOP。也就是说释放调用，当应用于 NULL phy 时，release +调用、phy_init()/phy_exit() 调用、phy_power_on()/phy_power_off() +调用都是 NOP。NULL phy 在处理可选的 phy 设备中很有用。 + +API的调用顺序 +============= + +通常，调用顺序应该是:: + + [devm_][of_]phy_get() + phy_init() + phy_power_on() + [phy_set_mode[_ext]()] + ... + phy_power_off() + phy_exit() + [[of_]phy_put()] + +一些PHY驱动可能没有实现 :c:func:`phy_init` 或 :c:func:`phy_power_on`, +但是控制器应该总是调用这些函数以兼容其它PHY，有些PHY可能要求 +:c:func:`phy_set_mode <phy_set_mode_ext>` 而其他 PHY 可能使用 +默认模式（通常通过设备树或其他固件配置）。出于兼容性考虑，如果您知道将 +使用哪种模式，则应始终调用此函数。通常，应在 :c:func:`phy_power_on` +之后调用此函数，尽管某些 PHY 驱动程序可能随时允许调用它。 + +释放对 PHY 的引用 +================= + +当控制器不再需要 PHY 时，它必须使用上一节中提到的 API 释放对已获得 +的 PHY 的引用。PHY 框架提供了 2 个 API 来释放对 PHY 的引用。 + +:: + + void phy_put(struct phy *phy); + void devm_phy_put(struct device *dev, struct phy *phy); + +这两个 API 都用于释放对 PHY 的引用，并且 devm_phy_put 会销毁与此 +PHY 关联的设备资源。 + +销毁 PHY +======== + +当创建 PHY 的驱动程序被卸载时，它应该使用以下 2 个 API 之一销毁其创 +建的 PHY:: + + void phy_destroy(struct phy *phy); + void devm_phy_destroy(struct device *dev, struct phy *phy); + +这两个 API 都会销毁 PHY，并且 devm_phy_destroy 会销毁与此 PHY 关 +联的 devres。 + +PM Runtime +========== + +这个子系统启用了pm runtime。 所以，在创建PHY 时，将调用此子系统创建的 +phy 设备的 pm_runtime_enable 函数，在销毁 PHY 时，将调用 +pm_runtime_disable。请注意，此子系统创建的 phy 设备将是调用 phy_create +（PHY provider 设备）的设备的子设备。 + +因此，由于父子关系，此子系统创建的 phy_device 的 pm_runtime_get_sync +调用 PHY provider 设备的 pm_runtime_get_sync。还应注意， +phy_power_on 和 phy_power_off 分别执行 phy_pm_runtime_get_sync 和 +phy_pm_runtime_put。有导出的 API，如 phy_pm_runtime_get、 +phy_pm_runtime_get_sync、phy_pm_runtime_put、phy_pm_runtime_put_sync、 +phy_pm_runtime_allow 和 phy_pm_runtime_forbid，用于执行 PM 操作。 + +PHY映射 +======= + +为了在没有 DeviceTree 帮助的情况下获取对 PHY 的引用，框架提供了可与 +clkdev 进行比较的查找，允许将 clk 结构体绑定到设备。当 struct phy 的 +句柄已存在时，可以在运行时进行查找。 + +该框架提供以下 API 用于注册和注销查找:: + + int phy_create_lookup(struct phy *phy, const char *con_id, + const char *dev_id); + void phy_remove_lookup(struct phy *phy, const char *con_id, + const char *dev_id); + +DeviceTree绑定 +============== + +PHY dt 绑定的文档可以在以下位置找到 @ +Documentation/devicetree/bindings/phy/phy-bindings.txt diff --git a/Documentation/translations/zh_CN/process/4.Coding.rst b/Documentation/translations/zh_CN/process/4.Coding.rst index 7cac9424f5d5..4cc35d410dbc 100644 --- a/Documentation/translations/zh_CN/process/4.Coding.rst +++ b/Documentation/translations/zh_CN/process/4.Coding.rst @@ -54,7 +54,7 @@ 注意您还可以使用 ``clang-format`` 工具来帮助您处理这些规则，快速自动重新格式 化部分代码，和审阅完整的文件以发现代码样式错误、拼写错误和可能的改进。它还 可以方便地排序 ``#includes`` 、对齐变量/宏、重排文本和其他类似任务。有关详细 -信息，请参阅文档 :ref:`Documentation/process/clang-format.rst <clangformat>` +信息，请参阅文档 :ref:`Documentation/dev-tools/clang-format.rst <clangformat>` 抽象层 ****** diff --git a/Documentation/translations/zh_CN/process/coding-style.rst b/Documentation/translations/zh_CN/process/coding-style.rst index 3bc2810b151d..10b9cb4f6a65 100644 --- a/Documentation/translations/zh_CN/process/coding-style.rst +++ b/Documentation/translations/zh_CN/process/coding-style.rst @@ -654,7 +654,7 @@ Documentation/translations/zh_CN/doc-guide/index.rst 和 scripts/kernel-doc 。 请注意，您还可以使用 ``clang-format`` 工具帮助您处理这些规则，快速自动重新格 式化部分代码，并审阅整个文件以发现代码风格错误、打字错误和可能的改进。它还可 以方便地排序 ``#include`` ，对齐变量/宏，重排文本和其他类似任务。 -详见 Documentation/process/clang-format.rst 。 +详见 Documentation/dev-tools/clang-format.rst 。 10) Kconfig 配置文件 diff --git a/Documentation/translations/zh_CN/process/index.rst b/Documentation/translations/zh_CN/process/index.rst index 5c6c8ccdd50d..5a5cd7c01c62 100644 --- a/Documentation/translations/zh_CN/process/index.rst +++ b/Documentation/translations/zh_CN/process/index.rst @@ -64,6 +64,7 @@ TODOLIST: management-style stable-kernel-rules submit-checklist + researcher-guidelines TODOLIST: @@ -71,7 +72,6 @@ TODOLIST: * kernel-docs * deprecated * maintainers -* researcher-guidelines * contribution-maturity-model diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst index 4e4aeaca796c..4ebc84cc0c54 100644 --- a/Documentation/translations/zh_CN/process/magic-number.rst +++ b/Documentation/translations/zh_CN/process/magic-number.rst @@ -1,6 +1,6 @@ .. include:: ../disclaimer-zh_CN.rst -:Original: Documentation/process/magic-number.rst +:Original: Documentation/staging/magic-number.rst :翻译: diff --git a/Documentation/translations/zh_CN/process/researcher-guidelines.rst b/Documentation/translations/zh_CN/process/researcher-guidelines.rst new file mode 100644 index 000000000000..1f2da68fc4e8 --- /dev/null +++ b/Documentation/translations/zh_CN/process/researcher-guidelines.rst @@ -0,0 +1,129 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +.. include:: ../disclaimer-zh_CN.rst + +.. _cn_researcherguidelines: + +:Original: Documentation/process/researcher-guidelines.rst + +:译者: + - 慕冬亮 Dongliang Mu <dzm91@hust.edu.cn> + +研究人员指南 ++++++++++++++++++++++ + +Linux 内核社区欢迎对 Linux 内核及其开发过程中涉及的活动与任何其他副产品 +进行透明的研究。Linux 从这种研究中受益匪浅，其多方面均由某种形式的研究所推动。 + +社区非常感谢研究人员在公开研究结果之前能分享初步发现，特别是涉及安全的研究。 +早期参与有助于提高研究质量并使 Linux 受益。无论如何，推荐研究人员与社区分享 +已发表研究的开放访问副本。 + +本文旨在澄清研究开展过程中 Linux 内核社区认可与不认可的一些做法。至少，这类 +研究及相关活动应遵循标准的研究伦理规则。有关研究伦理、技术伦理以及开发者社区 +研究的更多背景信息，请查阅： + +* `研究伦理史 <https://www.unlv.edu/research/ORI-HSR/history-ethics>`_ +* `IEEE 伦理 <https://www.ieee.org/about/ethics/index.html>`_ +* `开发者和研究人员对开源项目实验伦理的看法 <https://arxiv.org/pdf/2112.13217.pdf>`_ + +Linux 内核社区期望与项目互动的每个人都是真诚地为了使 Linux 变得更好。 +对 Linux 内核社区产生的任何公开可用的成果（包括但不限于源代码）的研究 +是受欢迎的，对开发者的研究如若要开展，则必须要明确说明，获得（开发者）同意。 + +完全基于公开可用资源（包括公共邮件列表的帖子和公开代码库的提交）的被动研究 +显然是允许的。不过，和任何研究一样，仍需遵循标准伦理。 + +然而，针对开发者行为的主动研究必须在获得相关开发者的明确同意和完全披露的情况下进行。 +未经同意，不得与开发者互动或对其进行实验；这也是标准的研究伦理。 + +调查 +======= + +研究通常采用调查问卷的形式发送给维护者或贡献者。然而，内核社区通常从这些调查问卷中获益 +甚少。内核开发过程之所以有效，是因为每个开发者都从中受益，即使与目标不同的人一起工作。 +而回应调查则是对繁忙开发者的单向需求，对他们自己或整个内核社区没有相应的好处。因此， +这种研究方法不被鼓励。 + +内核社区成员已经收到过多的电子邮件，可能会将调查请求视为对他们时间的又一要求。发送 +此类请求会剥夺社区宝贵的贡献者时间，且不太可能产生有统计意义的回应。 + +作为替代，研究人员应考虑参加开发者活动，举办研讨会来介绍研究项目及其对参与者的益处， +并直接与社区互动。该方式获得的信息将比电子邮件调查问卷丰富得多，且社区也能从中学习 +到您的见解。 + +补丁 +======= + +澄清：向开发者发送补丁**是**与他们互动，但他们已经同意接收**善意贡献**。故意发送有缺陷/ +有漏洞的补丁或在讨论中提供误导信息是不被同意的。这种交流会对开发者造成损害 +（例如，消耗时间、精力和士气），并通过破坏整个开发者社区对贡献者（及其所在组织） +的信任而损害项目，削弱为贡献者提供建设性反馈的努力，并使最终用户面临软件缺陷的风险。 + +研究人员参与 Linux 本身的开发与其他人一样受到欢迎和鼓励。研究 Linux 代码是常见 +做法，尤其是在开发或运行可产生可操作结果的分析工具时。 + +在与开发者社区互动时，发送补丁历来是产生影响的最佳方式。Linux 已经有很多已知的 +漏洞 -- 更有帮助的是经过审核的修复。在贡献之前，请仔细阅读相关文档： + +* Documentation/process/development-process.rst +* Documentation/process/submitting-patches.rst +* Documentation/admin-guide/reporting-issues.rst +* Documentation/process/security-bugs.rst + +然后发送补丁（包括所有如下详细信息的提交日志）并跟进其他开发者的任何反馈。 + +当发送因研究而产生的补丁时，提交日志应至少包含以下详细信息，以便开发者有适当的上下文 +来理解贡献。回答： + +* 找到了什么具体问题？ +* 在运行系统上如何触发这个问题？ +* 遇到这个问题对系统会有什么影响？ +* 如何发现这个问题？具体包括任何测试、静态或动态分析程序及其他用于执行工作的工具或方法的详细信息。 +* 在哪个版本的 Linux 上发现了这个问题？强烈推荐使用最新的发布版本或最近的 linux-next 分支（参见 Documentation/process/howto.rst）。 +* 进行了哪些更改来修复这个问题，为什么认为这些更改是正确的？ +* 如何进行构建测试和运行时测试？ +* 此更改修复了哪个先前的提交？这应该在 "Fixes:" 标签中，如文档所述。 +* 还有谁审查了这个补丁？这应该在适当的 "Reviewed-by:" 标签中注明；见下文。 + +例如:: + + From: Author <author@email> + Subject: [PATCH] drivers/foo_bar: Add missing kfree() + + The error path in foo_bar driver does not correctly free the allocated + struct foo_bar_info. This can happen if the attached foo_bar device + rejects the initialization packets sent during foo_bar_probe(). This + would result in a 64 byte slab memory leak once per device attach, + wasting memory resources over time. + + This flaw was found using an experimental static analysis tool we are + developing, LeakMagic[1], which reported the following warning when + analyzing the v5.15 kernel release: + + path/to/foo_bar.c:187: missing kfree() call? + + Add the missing kfree() to the error path. No other references to + this memory exist outside the probe function, so this is the only + place it can be freed. + + x86_64 and arm64 defconfig builds with CONFIG_FOO_BAR=y using GCC + 11.2 show no new warnings, and LeakMagic no longer warns about this + code path. As we don't have a FooBar device to test with, no runtime + testing was able to be performed. + + [1] https://url/to/leakmagic/details + + Reported-by: Researcher <researcher@email> + Fixes: aaaabbbbccccdddd ("Introduce support for FooBar") + Signed-off-by: Author <author@email> + Reviewed-by: Reviewer <reviewer@email> + +如果您是第一次参与贡献，建议在补丁在发布到公共列表前请其他人私下进行审核。（如果明确 +告诉您补丁需要更仔细的内部审查，则这是必需的。）这些人预计会在最终的补丁中包含他们的 +"Reviewed-by" 标签。找到熟悉 Linux 贡献的其他开发者，特别是您自己组织内的开发者， +并在将补丁发送到公共邮件列表前请他们帮助审核，往往会显著提高补丁的质量，从而减少 +其他开发者的负担。 + +如果你找不到人内部审核补丁且需要帮助找到这样的人，或者如果您对本文档和开发者社区的期望 +有任何其他问题，请联系技术咨询委员会私有邮件列表：<tech-board@groups.linuxfoundation.org>。 diff --git a/Documentation/translations/zh_CN/virt/guest-halt-polling.rst b/Documentation/translations/zh_CN/virt/guest-halt-polling.rst index b798d1cf0b48..463d1d829062 100644 --- a/Documentation/translations/zh_CN/virt/guest-halt-polling.rst +++ b/Documentation/translations/zh_CN/virt/guest-halt-polling.rst @@ -76,7 +76,7 @@ guest_halt_poll_ns将保持高位）。 默认值: Y -模块参数可以从Debugfs文件中设置，在:: +模块参数可以从sysfs文件中设置，在:: /sys/module/haltpoll/parameters/ diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt deleted file mode 100644 index 77d69d381316..000000000000 --- a/Documentation/translations/zh_TW/gpio.txt +++ /dev/null @@ -1,574 +0,0 @@ -Chinese translated version of Documentation/admin-guide/gpio - -If you have any comment or update to the content, please contact the -original document maintainer directly. However, if you have a problem -communicating in English you can also ask the Chinese maintainer for -help. Contact the Chinese maintainer if this translation is outdated -or if there is a problem with the translation. - -Maintainer: Grant Likely <grant.likely@secretlab.ca> - Linus Walleij <linus.walleij@linaro.org> -Traditional Chinese maintainer: Hu Haowen <2023002089@link.tyut.edu.cn> ---------------------------------------------------------------------- -Documentation/admin-guide/gpio 的繁體中文翻譯 - -如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文 -交流有困難的話，也可以向繁體中文版維護者求助。如果本翻譯更新不及時或 -者翻譯存在問題，請聯繫繁體中文版維護者。 - -英文版維護者： Grant Likely <grant.likely@secretlab.ca> - Linus Walleij <linus.walleij@linaro.org> -繁體中文版維護者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn> -繁體中文版翻譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn> -繁體中文版校譯者： 胡皓文 Hu Haowen <2023002089@link.tyut.edu.cn> - -以下爲正文 ---------------------------------------------------------------------- -GPIO 接口 - -本文檔提供了一個在Linux下訪問GPIO的公約概述。 - -這些函數以 gpio_* 作爲前綴。其他的函數不允許使用這樣的前綴或相關的 -__gpio_* 前綴。 - - -什麼是GPIO? -========== -"通用輸入/輸出口"(GPIO)是一個靈活的由軟體控制的數位訊號。他們可 -由多種晶片提供,且對於從事嵌入式和定製硬體的 Linux 開發者來說是 -比較熟悉。每個GPIO 都代表一個連接到特定引腳或球柵陣列(BGA)封裝中 -「球珠」的一個位。電路板原理圖顯示了 GPIO 與外部硬體的連接關係。 -驅動可以編寫成通用代碼，以使板級啓動代碼可傳遞引腳配置數據給驅動。 - -片上系統 (SOC) 處理器對 GPIO 有很大的依賴。在某些情況下,每個 -非專用引腳都可配置爲 GPIO,且大多數晶片都最少有一些 GPIO。 -可編程邏輯器件(類似 FPGA) 可以方便地提供 GPIO。像電源管理和 -音頻編解碼器這樣的多功能晶片經常留有一些這樣的引腳來幫助那些引腳 -匱乏的 SOC。同時還有通過 I2C 或 SPI 串行總線連接的「GPIO擴展器」 -晶片。大多數 PC 的南橋有一些擁有 GPIO 能力的引腳 (只有BIOS -固件才知道如何使用他們)。 - -GPIO 的實際功能因系統而異。通常用法有: - - - 輸出值可寫 (高電平=1，低電平=0)。一些晶片也有如何驅動這些值的選項, - 例如只允許輸出一個值、支持「線與」及其他取值類似的模式(值得注意的是 - 「開漏」信號) - - - 輸入值可讀(1、0)。一些晶片支持引腳在配置爲「輸出」時回讀，這對於類似 - 「線與」的情況(以支持雙向信號)是非常有用的。GPIO 控制器可能有輸入 - 去毛刺/消抖邏輯,這有時需要軟體控制。 - - - 輸入通常可作爲 IRQ 信號,一般是沿觸發,但有時是電平觸發。這樣的 IRQ - 可能配置爲系統喚醒事件,以將系統從低功耗狀態下喚醒。 - - - 通常一個 GPIO 根據不同產品電路板的需求,可以配置爲輸入或輸出,也有僅 - 支持單向的。 - - - 大部分 GPIO 可以在持有自旋鎖時訪問,但是通常由串行總線擴展的 GPIO - 不允許持有自旋鎖。但某些系統也支持這種類型。 - -對於給定的電路板,每個 GPIO 都用於某個特定的目的,如監控 MMC/SD 卡的 -插入/移除、檢測卡的防寫狀態、驅動 LED、配置收發器、模擬串行總線、 -復位硬體看門狗、感知開關狀態等等。 - - -GPIO 公約 -========= -注意,這個叫做「公約」，因爲這不是強制性的，不遵循這個公約是無傷大雅的， -因爲此時可移植性並不重要。GPIO 常用於板級特定的電路邏輯,甚至可能 -隨著電路板的版本而改變，且不可能在不同走線的電路板上使用。僅有在少數 -功能上才具有可移植性，其他功能是平台特定。這也是由於「膠合」的邏輯造成的。 - -此外，這不需要任何的執行框架，只是一個接口。某個平台可能通過一個簡單地 -訪問晶片寄存器的內聯函數來實現它，其他平台可能通過委託一系列不同的GPIO -控制器的抽象函數來實現它。(有一些可選的代碼能支持這種策略的實現,本文檔 -後面會介紹，但作爲 GPIO 接口的客戶端驅動程序必須與它的實現無關。) - -也就是說,如果在他們的平台上支持這個公約，驅動應儘可能的使用它。同時，平台 -必須在 Kconfig 中選擇 ARCH_REQUIRE_GPIOLIB 或者 ARCH_WANT_OPTIONAL_GPIOLIB -選項。那些調用標準 GPIO 函數的驅動應該在 Kconfig 入口中聲明依賴GENERIC_GPIO。 -當驅動包含文件: - - #include <linux/gpio.h> - -則 GPIO 函數是可用,無論是「真實代碼」還是經優化過的語句。如果你遵守 -這個公約，當你的代碼完成後，對其他的開發者來說會更容易看懂和維護。 - -注意，這些操作包含所用平台的 I/O 屏障代碼，驅動無須顯式地調用他們。 - - -標識 GPIO ---------- -GPIO 是通過無符號整型來標識的,範圍是 0 到 MAX_INT。保留「負」數 -用於其他目的,例如標識信號「在這個板子上不可用」或指示錯誤。未接觸底層 -硬體的代碼會忽略這些整數。 - -平台會定義這些整數的用法,且通常使用 #define 來定義 GPIO，這樣 -板級特定的啓動代碼可以直接關聯相應的原理圖。相對來說，驅動應該僅使用 -啓動代碼傳遞過來的 GPIO 編號，使用 platform_data 保存板級特定 -引腳配置數據 (同時還有其他須要的板級特定數據)，避免可能出現的問題。 - -例如一個平台使用編號 32-159 來標識 GPIO,而在另一個平台使用編號0-63 -標識一組 GPIO 控制器,64-79標識另一類 GPIO 控制器,且在一個含有 -FPGA 的特定板子上使用 80-95。編號不一定要連續,那些平台中，也可以 -使用編號2000-2063來標識一個 I2C 接口的 GPIO 擴展器中的 GPIO。 - -如果你要初始化一個帶有無效 GPIO 編號的結構體,可以使用一些負編碼 -(如"-EINVAL")，那將使其永遠不會是有效。來測試這樣一個結構體中的編號 -是否關聯一個 GPIO，你可使用以下斷言: - - int gpio_is_valid(int number); - -如果編號不存在，則請求和釋放 GPIO 的函數將拒絕執行相關操作(見下文)。 -其他編號也可能被拒絕,比如一個編號可能存在，但暫時在給定的電路上不可用。 - -一個平台是否支持多個 GPIO 控制器爲平台特定的實現問題，就像是否可以 -在 GPIO 編號空間中有「空洞」和是否可以在運行時添加新的控制器一樣。 -這些問題會影響其他事情，包括相鄰的 GPIO 編號是否存在等。 - -使用 GPIO ---------- -對於一個 GPIO，系統應該做的第一件事情就是通過 gpio_request() -函數分配它，見下文。 - -接下來是設置I/O方向，這通常是在板級啓動代碼中爲所使用的 GPIO 設置 -platform_device 時完成。 - - /* 設置爲輸入或輸出, 返回 0 或負的錯誤代碼 */ - int gpio_direction_input(unsigned gpio); - int gpio_direction_output(unsigned gpio, int value); - -返回值爲零代表成功，否則返回一個負的錯誤代碼。這個返回值需要檢查，因爲 -get/set(獲取/設置)函數調用沒法返回錯誤,且有可能是配置錯誤。通常， -你應該在進程上下文中調用這些函數。然而,對於自旋鎖安全的 GPIO，在板子 -啓動的早期、進程啓動前使用他們也是可以的。 - -對於作爲輸出的 GPIO，爲其提供初始輸出值，對於避免在系統啓動期間出現 -信號毛刺是很有幫助的。 - -爲了與傳統的 GPIO 接口兼容, 在設置一個 GPIO 方向時，如果它還未被申請， -則隱含了申請那個 GPIO 的操作(見下文)。這種兼容性正在從可選的 gpiolib -框架中移除。 - -如果這個 GPIO 編碼不存在，或者特定的 GPIO 不能用於那種模式，則方向 -設置可能失敗。依賴啓動固件來正確地設置方向通常是一個壞主意，因爲它可能 -除了啓動Linux，並沒有做更多的驗證工作。(同理, 板子的啓動代碼可能需要 -將這個復用的引腳設置爲 GPIO，並正確地配置上拉/下拉電阻。) - - -訪問自旋鎖安全的 GPIO -------------------- -大多數 GPIO 控制器可以通過內存讀/寫指令來訪問。這些指令不會休眠,可以 -安全地在硬(非線程)中斷例程和類似的上下文中完成。 - -對於那些 GPIO，使用以下的函數訪問: - - /* GPIO 輸入:返回零或非零 */ - int gpio_get_value(unsigned gpio); - - /* GPIO 輸出 */ - void gpio_set_value(unsigned gpio, int value); - -GPIO值是布爾值，零表示低電平，非零表示高電平。當讀取一個輸出引腳的值時， -返回值應該是引腳上的值。這個值不總是和輸出值相符，因爲存在開漏輸出信號和 -輸出延遲問題。 - -以上的 get/set 函數無錯誤返回值，因爲之前 gpio_direction_*()應已檢查過 -其是否爲「無效GPIO」。此外，還需要注意的是並不是所有平台都可以從輸出引腳 -中讀取數據，對於不能讀取的引腳應總返回零。另外，對那些在原子上下文中無法 -安全訪問的 GPIO (譯者註：因爲訪問可能導致休眠)使用這些函數是不合適的 -(見下文)。 - -在 GPIO 編號(還有輸出、值)爲常數的情況下,鼓勵通過平台特定的實現來優化 -這兩個函數來訪問 GPIO 值。這種情況(讀寫一個硬體寄存器)下只需要幾條指令 -是很正常的,且無須自旋鎖。這種優化函數比起那些在子程序上花費許多指令的 -函數可以使得模擬接口(譯者注:例如 GPIO 模擬 I2C、1-wire 或 SPI)的 -應用(在空間和時間上都)更具效率。 - - -訪問可能休眠的 GPIO ------------------ -某些 GPIO 控制器必須通過基於總線(如 I2C 或 SPI)的消息訪問。讀或寫這些 -GPIO 值的命令需要等待其信息排到隊首才發送命令，再獲得其反饋。期間需要 -休眠，這不能在 IRQ 例程(中斷上下文)中執行。 - -爲了訪問這種 GPIO,內核定義了一套不同的函數: - - /* GPIO 輸入:返回零或非零 ,可能會休眠 */ - int gpio_get_value_cansleep(unsigned gpio); - - /* GPIO 輸出,可能會休眠 */ - void gpio_set_value_cansleep(unsigned gpio, int value); - -訪問這樣的 GPIO 需要一個允許休眠的上下文，例如線程 IRQ 處理例程，並用以上的 -訪問函數替換那些沒有 cansleep()後綴的自旋鎖安全訪問函數。 - -除了這些訪問函數可能休眠，且它們操作的 GPIO 不能在硬體 IRQ 處理例程中訪問的 -事實，這些處理例程實際上和自旋鎖安全的函數是一樣的。 - -** 除此之外 ** 調用設置和配置此類 GPIO 的函數也必須在允許休眠的上下文中， -因爲它們可能也需要訪問 GPIO 控制器晶片: (這些設置函數通常在板級啓動代碼或者 -驅動探測/斷開代碼中，所以這是一個容易滿足的約束條件。) - - gpio_direction_input() - gpio_direction_output() - gpio_request() - -## gpio_request_one() - - gpio_free() - - -聲明和釋放 GPIO ----------------------------- -爲了有助於捕獲系統配置錯誤,定義了兩個函數。 - - /* 申請 GPIO, 返回 0 或負的錯誤代碼. - * 非空標籤可能有助於診斷. - */ - int gpio_request(unsigned gpio, const char *label); - - /* 釋放之前聲明的 GPIO */ - void gpio_free(unsigned gpio); - -將無效的 GPIO 編碼傳遞給 gpio_request()會導致失敗，申請一個已使用這個 -函數聲明過的 GPIO 也會失敗。gpio_request()的返回值必須檢查。你應該在 -進程上下文中調用這些函數。然而,對於自旋鎖安全的 GPIO,在板子啓動的早期、 -進入進程之前是可以申請的。 - -這個函數完成兩個基本的目標。一是標識那些實際上已作爲 GPIO 使用的信號線， -這樣便於更好地診斷;系統可能需要服務幾百個可用的 GPIO，但是對於任何一個 -給定的電路板通常只有一些被使用。另一個目的是捕獲衝突，查明錯誤:如兩個或 -更多驅動錯誤地認爲他們已經獨占了某個信號線,或是錯誤地認爲移除一個管理著 -某個已激活信號的驅動是安全的。也就是說，申請 GPIO 的作用類似一種鎖機制。 - -某些平台可能也使用 GPIO 作爲電源管理激活信號(例如通過關閉未使用晶片區和 -簡單地關閉未使用時鐘)。 - -對於 GPIO 使用 pinctrl 子系統已知的引腳，子系統應該被告知其使用情況； -一個 gpiolib 驅動的 .request()操作應調用 pinctrl_gpio_request()， -而 gpiolib 驅動的 .free()操作應調用 pinctrl_gpio_free()。pinctrl -子系統允許 pinctrl_gpio_request()在某個引腳或引腳組以復用形式「屬於」 -一個設備時都成功返回。 - -任何須將 GPIO 信號導向適當引腳的引腳復用硬體的編程應該發生在 GPIO -驅動的 .direction_input()或 .direction_output()函數中，以及 -任何輸出 GPIO 值的設置之後。這樣可使從引腳特殊功能到 GPIO 的轉換 -不會在引腳產生毛刺波形。有時當用一個 GPIO 實現其信號驅動一個非 GPIO -硬體模塊的解決方案時，就需要這種機制。 - -某些平台允許部分或所有 GPIO 信號使用不同的引腳。類似的，GPIO 或引腳的 -其他方面也需要配置，如上拉/下拉。平台軟體應該在對這些 GPIO 調用 -gpio_request()前將這類細節配置好，例如使用 pinctrl 子系統的映射表， -使得 GPIO 的用戶無須關注這些細節。 - -還有一個值得注意的是在釋放 GPIO 前，你必須停止使用它。 - - -注意:申請一個 GPIO 並沒有以任何方式配置它，只不過標識那個 GPIO 處於使用 -狀態。必須有另外的代碼來處理引腳配置(如控制 GPIO 使用的引腳、上拉/下拉)。 -考慮到大多數情況下聲明 GPIO 之後就會立即配置它們,所以定義了以下三個輔助函數: - - /* 申請一個 GPIO 信號, 同時通過特定的'flags'初始化配置, - * 其他和 gpio_request()的參數和返回值相同 - * - */ - int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); - -這裡 'flags' 當前定義可指定以下屬性: - - * GPIOF_DIR_IN - 配置方向爲輸入 - * GPIOF_DIR_OUT - 配置方向爲輸出 - - * GPIOF_INIT_LOW - 在作爲輸出時,初始值爲低電平 - * GPIOF_INIT_HIGH - 在作爲輸出時,初始值爲高電平 - -因爲 GPIOF_INIT_* 僅有在配置爲輸出的時候才存在,所以有效的組合爲: - - * GPIOF_IN - 配置爲輸入 - * GPIOF_OUT_INIT_LOW - 配置爲輸出,並初始化爲低電平 - * GPIOF_OUT_INIT_HIGH - 配置爲輸出,並初始化爲高電平 - -更進一步,爲了更簡單地聲明/釋放多個 GPIO,'struct gpio'被引進來封裝所有 -這三個領域: - - struct gpio { - unsigned gpio; - unsigned long flags; - const char *label; - }; - -一個典型的用例: - - static struct gpio leds_gpios[] = { - { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* 默認開啓 */ - { 33, GPIOF_OUT_INIT_LOW, "Green LED" }, /* 默認關閉 */ - { 34, GPIOF_OUT_INIT_LOW, "Red LED" }, /* 默認關閉 */ - { 35, GPIOF_OUT_INIT_LOW, "Blue LED" }, /* 默認關閉 */ - { ... }, - }; - - err = gpio_request_one(31, GPIOF_IN, "Reset Button"); - if (err) - ... - - -GPIO 映射到 IRQ --------------------- -GPIO 編號是無符號整數;IRQ 編號也是。這些構成了兩個邏輯上不同的命名空間 -(GPIO 0 不一定使用 IRQ 0)。你可以通過以下函數在它們之間實現映射: - - /* 映射 GPIO 編號到 IRQ 編號 */ - int gpio_to_irq(unsigned gpio); - -它們的返回值爲對應命名空間的相關編號，或是負的錯誤代碼(如果無法映射)。 -(例如,某些 GPIO 無法做爲 IRQ 使用。)以下的編號錯誤是未經檢測的:使用一個 -未通過 gpio_direction_input()配置爲輸入的 GPIO 編號，或者使用一個 -並非來源於gpio_to_irq()的 IRQ 編號。 - -這兩個映射函數可能會在信號編號的加減計算過程上花些時間。它們不可休眠。 - -gpio_to_irq()返回的非錯誤值可以傳遞給 request_irq()或者 free_irq()。 -它們通常通過板級特定的初始化代碼存放到平台設備的 IRQ 資源中。注意:IRQ -觸發選項是 IRQ 接口的一部分，如 IRQF_TRIGGER_FALLING，系統喚醒能力 -也是如此。 - - -模擬開漏信號 ----------------------------- -有時在只有低電平信號作爲實際驅動結果(譯者注:多個輸出連接於一點，邏輯電平 -結果爲所有輸出的邏輯與)的時候,共享的信號線需要使用「開漏」信號。(該術語 -適用於 CMOS 管；而 TTL 用「集電極開路」。)一個上拉電阻使信號爲高電平。這 -有時被稱爲「線與」。實際上，從負邏輯(低電平爲真)的角度來看，這是一個「線或」。 - -一個開漏信號的常見例子是共享的低電平使能 IRQ 信號線。此外,有時雙向數據總線 -信號也使用漏極開路信號。 - -某些 GPIO 控制器直接支持開漏輸出，還有許多不支持。當你需要開漏信號，但 -硬體又不直接支持的時候，一個常用的方法是用任何即可作輸入也可作輸出的 GPIO -引腳來模擬: - - LOW: gpio_direction_output(gpio, 0) ... 這代碼驅動信號並覆蓋 - 上拉配置。 - - HIGH: gpio_direction_input(gpio) ... 這代碼關閉輸出,所以上拉電阻 - (或其他的一些器件)控制了信號。 - -如果你將信號線「驅動」爲高電平，但是 gpio_get_value(gpio)報告了一個 -低電平(在適當的上升時間後)，你就可以知道是其他的一些組件將共享信號線拉低了。 -這不一定是錯誤的。一個常見的例子就是 I2C 時鐘的延長：一個需要較慢時鐘的 -從設備延遲 SCK 的上升沿，而 I2C 主設備相應地調整其信號傳輸速率。 - - -這些公約忽略了什麼? -================ -這些公約忽略的最大一件事就是引腳復用，因爲這屬於高度晶片特定的屬性且 -沒有可移植性。某個平台可能不需要明確的復用信息；有的對於任意給定的引腳 -可能只有兩個功能選項；有的可能每個引腳有八個功能選項；有的可能可以將 -幾個引腳中的任何一個作爲給定的 GPIO。(是的，這些例子都來自於當前運行 -Linux 的系統。) - -在某些系統中,與引腳復用相關的是配置和使能集成的上、下拉模式。並不是所有 -平台都支持這種模式,或者不會以相同的方式來支持這種模式；且任何給定的電路板 -可能使用外置的上拉(或下拉)電阻,這時晶片上的就不應該使用。(當一個電路需要 -5kOhm 的拉動電阻,晶片上的 100 kOhm 電阻就不能做到。)同樣的，驅動能力 -(2 mA vs 20 mA)和電壓(1.8V vs 3.3V)是平台特定問題,就像模型一樣在 -可配置引腳和 GPIO 之間(沒)有一一對應的關係。 - -還有其他一些系統特定的機制沒有在這裡指出，例如上述的輸入去毛刺和線與輸出 -選項。硬體可能支持批量讀或寫 GPIO，但是那一般是配置相關的：對於處於同一 -塊區(bank)的GPIO。(GPIO 通常以 16 或 32 個組成一個區塊，一個給定的 -片上系統一般有幾個這樣的區塊。)某些系統可以通過輸出 GPIO 觸發 IRQ， -或者從並非以 GPIO 管理的引腳取值。這些機制的相關代碼沒有必要具有可移植性。 - -當前，動態定義 GPIO 並不是標準的，例如作爲配置一個帶有某些 GPIO 擴展器的 -附加電路板的副作用。 - -GPIO 實現者的框架 (可選) -===================== -前面提到了，有一個可選的實現框架，讓平台使用相同的編程接口，更加簡單地支持 -不同種類的 GPIO 控制器。這個框架稱爲"gpiolib"。 - -作爲一個輔助調試功能，如果 debugfs 可用，就會有一個 /sys/kernel/debug/gpio -文件。通過這個框架，它可以列出所有註冊的控制器,以及當前正在使用中的 GPIO -的狀態。 - - -控制器驅動: gpio_chip -------------------- -在框架中每個 GPIO 控制器都包裝爲一個 "struct gpio_chip"，他包含了 -該類型的每個控制器的常用信息: - - - 設置 GPIO 方向的方法 - - 用於訪問 GPIO 值的方法 - - 告知調用其方法是否可能休眠的標誌 - - 可選的 debugfs 信息導出方法 (顯示類似上拉配置一樣的額外狀態) - - 診斷標籤 - -也包含了來自 device.platform_data 的每個實例的數據：它第一個 GPIO 的 -編號和它可用的 GPIO 的數量。 - -實現 gpio_chip 的代碼應支持多控制器實例，這可能使用驅動模型。那些代碼要 -配置每個 gpio_chip，並發起gpiochip_add()。卸載一個 GPIO 控制器很少見， -但在必要的時候可以使用 gpiochip_remove()。 - -大部分 gpio_chip 是一個實例特定結構體的一部分，而並不將 GPIO 接口單獨 -暴露出來,比如編址、電源管理等。類似編解碼器這樣的晶片會有複雜的非 GPIO -狀態。 - -任何一個 debugfs 信息導出方法通常應該忽略還未申請作爲 GPIO 的信號線。 -他們可以使用 gpiochip_is_requested()測試，當這個 GPIO 已經申請過了 -就返回相關的標籤，否則返回 NULL。 - - -平台支持 -------- -爲了支持這個框架，一個平台的 Kconfig 文件將會 "select"(選擇) -ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB，並讓它的 -<asm/gpio.h> 包含 <asm-generic/gpio.h>，同時定義二個方法: -gpio_get_value()、gpio_set_value()。 - -它也應提供一個 ARCH_NR_GPIOS 的定義值，這樣可以更好地反映該平台 GPIO -的實際數量,節省靜態表的空間。(這個定義值應該包含片上系統內建 GPIO 和 -GPIO 擴展器中的數據。) - -ARCH_REQUIRE_GPIOLIB 意味著 gpiolib 核心在這個構架中將總是編譯進內核。 - -ARCH_WANT_OPTIONAL_GPIOLIB 意味著 gpiolib 核心默認關閉,且用戶可以 -使能它,並將其編譯進內核(可選)。 - -如果這些選項都沒被選擇,該平台就不通過 GPIO-lib 支持 GPIO,且代碼不可以 -被用戶使能。 - -以下這些方法的實現可以直接使用框架代碼,並總是通過 gpio_chip 調度: - - #define gpio_get_value __gpio_get_value - #define gpio_set_value __gpio_set_value - -這些定義可以用更理想的實現方法替代，那就是使用經過邏輯優化的內聯函數來訪問 -基於特定片上系統的 GPIO。例如,若引用的 GPIO (寄存器位偏移)是常量「12」， -讀取或設置它可能只需少則兩或三個指令，且不會休眠。當這樣的優化無法實現時， -那些函數必須使用框架提供的代碼，那就至少要幾十條指令才可以實現。對於用 GPIO -模擬的 I/O 接口, 如此精簡指令是很有意義的。 - -對於片上系統，平台特定代碼爲片上 GPIO 每個區(bank)定義並註冊 gpio_chip -實例。那些 GPIO 應該根據晶片廠商的文檔進行編碼/標籤,並直接和電路板原理圖 -對應。他們應該開始於零並終止於平台特定的限制。這些 GPIO(代碼)通常從 -arch_initcall()或者更早的地方集成進平台初始化代碼，使這些 GPIO 總是可用， -且他們通常可以作爲 IRQ 使用。 - -板級支持 -------- -對於外部 GPIO 控制器(例如 I2C 或 SPI 擴展器、專用晶片、多功能器件、FPGA -或 CPLD)，大多數常用板級特定代碼都可以註冊控制器設備，並保證他們的驅動知道 -gpiochip_add()所使用的 GPIO 編號。他們的起始編號通常跟在平台特定的 GPIO -編號之後。 - -例如板級啓動代碼應該創建結構體指明晶片公開的 GPIO 範圍，並使用 platform_data -將其傳遞給每個 GPIO 擴展器晶片。然後晶片驅動中的 probe()例程可以將這個 -數據傳遞給 gpiochip_add()。 - -初始化順序很重要。例如，如果一個設備依賴基於 I2C 的(擴展)GPIO，那麼它的 -probe()例程就應該在那個 GPIO 有效以後才可以被調用。這意味著設備應該在 -GPIO 可以工作之後才可被註冊。解決這類依賴的的一種方法是讓這種 gpio_chip -控制器向板級特定代碼提供 setup()和 teardown()回調函數。一旦所有必須的 -資源可用之後，這些板級特定的回調函數將會註冊設備，並可以在這些 GPIO 控制器 -設備變成無效時移除它們。 - - -用戶空間的 Sysfs 接口(可選) -======================== -使用「gpiolib」實現框架的平台可以選擇配置一個 GPIO 的 sysfs 用戶接口。 -這不同於 debugfs 接口，因爲它提供的是對 GPIO方向和值的控制，而不只顯示 -一個GPIO 的狀態摘要。此外,它可以出現在沒有調試支持的產品級系統中。 - -例如，通過適當的系統硬體文檔，用戶空間可以知道 GIOP #23 控制 Flash -存儲器的防寫(用於保護其中 Bootloader 分區)。產品的系統升級可能需要 -臨時解除這個保護：首先導入一個 GPIO，改變其輸出狀態，然後在重新使能防寫 -前升級代碼。通常情況下,GPIO #23 是不會被觸及的，並且內核也不需要知道他。 - -根據適當的硬體文檔，某些系統的用戶空間 GPIO 可以用於確定系統配置數據， -這些數據是標準內核不知道的。在某些任務中，簡單的用戶空間 GPIO 驅動可能是 -系統真正需要的。 - -注意：標準內核驅動中已經存在通用的「LED 和按鍵」GPIO 任務，分別是: -"leds-gpio" 和 "gpio_keys"。請使用這些來替代直接訪問 GPIO，因爲集成在 -內核框架中的這類驅動比你在用戶空間的代碼更好。 - - -Sysfs 中的路徑 --------------- -在/sys/class/gpio 中有 3 類入口: - - - 用於在用戶空間控制 GPIO 的控制接口; - - - GPIOs 本身;以及 - - - GPIO 控制器 ("gpio_chip" 實例)。 - -除了這些標準的文件,還包含「device」符號連結。 - -控制接口是只寫的: - - /sys/class/gpio/ - - "export" ... 用戶空間可以通過寫其編號到這個文件，要求內核導出 - 一個 GPIO 的控制到用戶空間。 - - 例如: 如果內核代碼沒有申請 GPIO #19,"echo 19 > export" - 將會爲 GPIO #19 創建一個 "gpio19" 節點。 - - "unexport" ... 導出到用戶空間的逆操作。 - - 例如: "echo 19 > unexport" 將會移除使用"export"文件導出的 - "gpio19" 節點。 - -GPIO 信號的路徑類似 /sys/class/gpio/gpio42/ (對於 GPIO #42 來說)， -並有如下的讀/寫屬性: - - /sys/class/gpio/gpioN/ - - "direction" ... 讀取得到 "in" 或 "out"。這個值通常運行寫入。 - 寫入"out" 時,其引腳的默認輸出爲低電平。爲了確保無故障運行， - "low" 或 "high" 的電平值應該寫入 GPIO 的配置，作爲初始輸出值。 - - 注意:如果內核不支持改變 GPIO 的方向，或者在導出時內核代碼沒有 - 明確允許用戶空間可以重新配置 GPIO 方向，那麼這個屬性將不存在。 - - "value" ... 讀取得到 0 (低電平) 或 1 (高電平)。如果 GPIO 配置爲 - 輸出,這個值允許寫操作。任何非零值都以高電平看待。 - - 如果引腳可以配置爲中斷信號，且如果已經配置了產生中斷的模式 - （見"edge"的描述），你可以對這個文件使用輪詢操作(poll(2))， - 且輪詢操作會在任何中斷觸發時返回。如果你使用輪詢操作(poll(2))， - 請在 events 中設置 POLLPRI 和 POLLERR。如果你使用輪詢操作 - (select(2))，請在 exceptfds 設置你期望的文件描述符。在 - 輪詢操作(poll(2))返回之後，既可以通過 lseek(2)操作讀取 - sysfs 文件的開始部分，也可以關閉這個文件並重新打開它來讀取數據。 - - "edge" ... 讀取得到「none」、「rising」、「falling」或者「both」。 - 將這些字符串寫入這個文件可以選擇沿觸發模式，會使得輪詢操作 - (select(2))在"value"文件中返回。 - - 這個文件僅有在這個引腳可以配置爲可產生中斷輸入引腳時，才存在。 - - "active_low" ... 讀取得到 0 (假) 或 1 (真)。寫入任何非零值可以 - 翻轉這個屬性的(讀寫)值。已存在或之後通過"edge"屬性設置了"rising" - 和 "falling" 沿觸發模式的輪詢操作(poll(2))將會遵循這個設置。 - -GPIO 控制器的路徑類似 /sys/class/gpio/gpiochip42/ (對於從#42 GPIO -開始實現控制的控制器),並有著以下只讀屬性: - - /sys/class/gpio/gpiochipN/ - - "base" ... 與以上的 N 相同,代表此晶片管理的第一個 GPIO 的編號 - - "label" ... 用於診斷 (並不總是只有唯一值) - - "ngpio" ... 此控制器所管理的 GPIO 數量(而 GPIO 編號從 N 到 - N + ngpio - 1) - -大多數情況下,電路板的文檔應當標明每個 GPIO 的使用目的。但是那些編號並不總是 -固定的,例如在擴展卡上的 GPIO會根據所使用的主板或所在堆疊架構中其他的板子而 -有所不同。在這種情況下,你可能需要使用 gpiochip 節點(儘可能地結合電路圖)來 -確定給定信號所用的 GPIO 編號。 diff --git a/Documentation/translations/zh_TW/process/4.Coding.rst b/Documentation/translations/zh_TW/process/4.Coding.rst index bdd2abe4daf4..e90a6b51fb98 100644 --- a/Documentation/translations/zh_TW/process/4.Coding.rst +++ b/Documentation/translations/zh_TW/process/4.Coding.rst @@ -57,7 +57,7 @@ 注意您還可以使用 ``clang-format`` 工具來幫助您處理這些規則，快速自動重新格式 化部分代碼，和審閱完整的文件以發現代碼樣式錯誤、拼寫錯誤和可能的改進。它還 可以方便地排序 ``#includes`` 、對齊變量/宏、重排文本和其他類似任務。有關詳細 -信息，請參閱文檔 :ref:`Documentation/process/clang-format.rst <clangformat>` +信息，請參閱文檔 :ref:`Documentation/dev-tools/clang-format.rst <clangformat>` 抽象層 ****** diff --git a/Documentation/translations/zh_TW/process/coding-style.rst b/Documentation/translations/zh_TW/process/coding-style.rst index c7ac504f6f40..311c6f6bad0b 100644 --- a/Documentation/translations/zh_TW/process/coding-style.rst +++ b/Documentation/translations/zh_TW/process/coding-style.rst @@ -657,7 +657,7 @@ Documentation/translations/zh_CN/doc-guide/index.rst 和 scripts/kernel-doc 。 請注意，您還可以使用 ``clang-format`` 工具幫助您處理這些規則，快速自動重新格 式化部分代碼，並審閱整個文件以發現代碼風格錯誤、打字錯誤和可能的改進。它還可 以方便地排序 ``#include`` ，對齊變量/宏，重排文本和其他類似任務。 -詳見 Documentation/process/clang-format.rst 。 +詳見 Documentation/dev-tools/clang-format.rst 。 10) Kconfig 配置文件 diff --git a/Documentation/translations/zh_TW/process/magic-number.rst b/Documentation/translations/zh_TW/process/magic-number.rst index 199cd5d63973..5582df6d7ca7 100644 --- a/Documentation/translations/zh_TW/process/magic-number.rst +++ b/Documentation/translations/zh_TW/process/magic-number.rst @@ -4,7 +4,7 @@ .. include:: ../disclaimer-zh_TW.rst -:Original: :ref:`Documentation/process/magic-number.rst <magicnumbers>` +:Original: :ref:`Documentation/staging/magic-number.rst <magicnumbers>` 如果想評論或更新本文的內容，請直接發信到LKML。如果你使用英文交流有困難的話，也可 以向中文版維護者求助。如果本翻譯更新不及時或者翻譯存在問題，請聯繫中文版維護者:: diff --git a/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst index 25263b8f0588..2e3a52c113d5 100644 --- a/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst +++ b/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst @@ -36,6 +36,13 @@ Description Get the values of all requested lines. +The values returned are logical, indicating if the line is active or inactive. +The ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` flag controls the mapping between physical +values (high/low) and logical values (active/inactive). +If ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is not set then high is active and +low is inactive. If ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is set then low is active +and high is inactive. + The values of both input and output lines may be read. For output lines, the value returned is driver and configuration dependent and diff --git a/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst b/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst index d002a84681ac..a03f30db63ab 100644 --- a/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst +++ b/Documentation/userspace-api/gpio/gpio-handle-set-config-ioctl.rst @@ -43,7 +43,10 @@ The configuration applies to all requested lines. The same :ref:`gpio-get-linehandle-config-rules` and :ref:`gpio-get-linehandle-config-support` that apply when requesting the -lines also apply when updating the line configuration. +lines also apply when updating the line configuration, with the additional +restriction that a direction flag must be set. Requesting an invalid +configuration, including without a direction flag set, is an error +(**EINVAL**). The motivating use case for this command is changing direction of bi-directional lines between input and output, but it may be used more diff --git a/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst index 0aa05e623a6c..12862132b420 100644 --- a/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst +++ b/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst @@ -36,6 +36,13 @@ Description Set the values of all requested output lines. +The values set are logical, indicating if the line is to be active or inactive. +The ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` flag controls the mapping between logical +values (active/inactive) and physical values (high/low). +If ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is not set then active is high and +inactive is low. If ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is set then active is low +and inactive is high. + Only the values of output lines may be set. Attempting to set the value of input lines is an error (**EPERM**). diff --git a/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst b/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst index 68b8d4f9f604..d1e7e2383b0d 100644 --- a/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst +++ b/Documentation/userspace-api/gpio/gpio-lineevent-data-read.rst @@ -44,6 +44,11 @@ Edge detection must be enabled for the input line using either both. Edge events are then generated whenever edge interrupts are detected on the input line. +Edges are defined in terms of changes to the logical line value, so an inactive +to active transition is a rising edge. If ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is +set then logical polarity is the opposite of physical polarity, and +``GPIOEVENT_REQUEST_RISING_EDGE`` then corresponds to a falling physical edge. + The kernel captures and timestamps edge events as close as possible to their occurrence and stores them in a buffer from where they can be read by userspace at its convenience using `read()`. diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst b/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst index 6513c23fb7ca..1312668e0f6a 100644 --- a/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst +++ b/Documentation/userspace-api/gpio/gpio-v2-line-event-read.rst @@ -40,6 +40,11 @@ Edge detection must be enabled for the input line using either both. Edge events are then generated whenever edge interrupts are detected on the input line. +Edges are defined in terms of changes to the logical line value, so an inactive +to active transition is a rising edge. If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is +set then logical polarity is the opposite of physical polarity, and +``GPIO_V2_LINE_FLAG_EDGE_RISING`` then corresponds to a falling physical edge. + The kernel captures and timestamps edge events as close as possible to their occurrence and stores them in a buffer from where they can be read by userspace at its convenience using `read()`. diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst index e4e74a1926d8..d7defd4ca397 100644 --- a/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst +++ b/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst @@ -34,6 +34,13 @@ Description Get the values of requested lines. +The values returned are logical, indicating if the line is active or inactive. +The ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` flag controls the mapping between physical +values (high/low) and logical values (active/inactive). +If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is not set then high is active and low is +inactive. If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is set then low is active and +high is inactive. + The values of both input and output lines may be read. For output lines, the value returned is driver and configuration dependent and diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst index 9b942a8a53ca..cfaab801556c 100644 --- a/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst +++ b/Documentation/userspace-api/gpio/gpio-v2-line-set-config-ioctl.rst @@ -35,11 +35,14 @@ Description Update the configuration of previously requested lines, without releasing the line or introducing potential glitches. -The new configuration must specify the configuration of all requested lines. +The new configuration must specify a configuration for all requested lines. The same :ref:`gpio-v2-get-line-config-rules` and :ref:`gpio-v2-get-line-config-support` that apply when requesting the lines -also apply when updating the line configuration. +also apply when updating the line configuration, with the additional +restriction that a direction flag must be set to enable reconfiguration. +If no direction flag is set in the configuration for a given line then the +configuration for that line is left unchanged. The motivating use case for this command is changing direction of bi-directional lines between input and output, but it may also be used to diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst index 6d2d1886950b..16dd50fc60ca 100644 --- a/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst +++ b/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst @@ -35,6 +35,13 @@ Description Set the values of requested output lines. +The values set are logical, indicating if the line is to be active or inactive. +The ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` flag controls the mapping between logical +values (active/inactive) and physical values (high/low). +If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is not set then active is high and inactive +is low. If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is set then active is low and +inactive is high. + Only the values of output lines may be set. Attempting to set the value of an input line is an error (**EPERM**). diff --git a/Documentation/userspace-api/gpio/sysfs.rst b/Documentation/userspace-api/gpio/sysfs.rst index 116921048b18..bd64896de91a 100644 --- a/Documentation/userspace-api/gpio/sysfs.rst +++ b/Documentation/userspace-api/gpio/sysfs.rst @@ -97,9 +97,10 @@ and have the following read/write attributes: poll(2) will return whenever the interrupt was triggered. If you use poll(2), set the events POLLPRI and POLLERR. If you use select(2), set the file descriptor in exceptfds. After - poll(2) returns, either lseek(2) to the beginning of the sysfs - file and read the new value or close the file and re-open it - to read the value. + poll(2) returns, use pread(2) to read the value at offset + zero. Alternatively, either lseek(2) to the beginning of the + sysfs file and read the new value or close the file and + re-open it to read the value. "edge" ... reads as either "none", "rising", "falling", or diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst index 8a251d71fa6e..274cc7546efc 100644 --- a/Documentation/userspace-api/index.rst +++ b/Documentation/userspace-api/index.rst @@ -45,7 +45,6 @@ Devices and I/O accelerators/ocxl dma-buf-alloc-exchange gpio/index - iommu iommufd media/index dcdbas diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 9a97030c6c8d..e91c0376ee59 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -97,6 +97,8 @@ Code Seq# Include File Comments '%' 00-0F include/uapi/linux/stm.h System Trace Module subsystem <mailto:alexander.shishkin@linux.intel.com> '&' 00-07 drivers/firewire/nosy-user.h +'*' 00-1F uapi/linux/user_events.h User Events Subsystem + <mailto:linux-trace-kernel@vger.kernel.org> '1' 00-1F linux/timepps.h PPS kit from Ulrich Windl <ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/> '2' 01-04 linux/i2o.h @@ -363,6 +365,7 @@ Code Seq# Include File Comments 0xB6 all linux/fpga-dfl.h 0xB7 all uapi/linux/remoteproc_cdev.h <mailto:linux-remoteproc@vger.kernel.org> 0xB7 all uapi/linux/nsfs.h <mailto:Andrei Vagin <avagin@openvz.org>> +0xB8 01-02 uapi/misc/mrvl_cn10k_dpi.h Marvell CN10K DPI driver 0xC0 00-0F linux/usb/iowarrior.h 0xCA 00-0F uapi/misc/cxl.h 0xCA 10-2F uapi/misc/ocxl.h diff --git a/Documentation/userspace-api/iommu.rst b/Documentation/userspace-api/iommu.rst deleted file mode 100644 index d3108c1519d5..000000000000 --- a/Documentation/userspace-api/iommu.rst +++ /dev/null @@ -1,209 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 -.. iommu: - -===================================== -IOMMU Userspace API -===================================== - -IOMMU UAPI is used for virtualization cases where communications are -needed between physical and virtual IOMMU drivers. For baremetal -usage, the IOMMU is a system device which does not need to communicate -with userspace directly. - -The primary use cases are guest Shared Virtual Address (SVA) and -guest IO virtual address (IOVA), wherein the vIOMMU implementation -relies on the physical IOMMU and for this reason requires interactions -with the host driver. - -.. contents:: :local: - -Functionalities -=============== -Communications of user and kernel involve both directions. The -supported user-kernel APIs are as follows: - -1. Bind/Unbind guest PASID (e.g. Intel VT-d) -2. Bind/Unbind guest PASID table (e.g. ARM SMMU) -3. Invalidate IOMMU caches upon guest requests -4. Report errors to the guest and serve page requests - -Requirements -============ -The IOMMU UAPIs are generic and extensible to meet the following -requirements: - -1. Emulated and para-virtualised vIOMMUs -2. Multiple vendors (Intel VT-d, ARM SMMU, etc.) -3. Extensions to the UAPI shall not break existing userspace - -Interfaces -========== -Although the data structures defined in IOMMU UAPI are self-contained, -there are no user API functions introduced. Instead, IOMMU UAPI is -designed to work with existing user driver frameworks such as VFIO. - -Extension Rules & Precautions ------------------------------ -When IOMMU UAPI gets extended, the data structures can *only* be -modified in two ways: - -1. Adding new fields by re-purposing the padding[] field. No size change. -2. Adding new union members at the end. May increase the structure sizes. - -No new fields can be added *after* the variable sized union in that it -will break backward compatibility when offset moves. A new flag must -be introduced whenever a change affects the structure using either -method. The IOMMU driver processes the data based on flags which -ensures backward compatibility. - -Version field is only reserved for the unlikely event of UAPI upgrade -at its entirety. - -It's *always* the caller's responsibility to indicate the size of the -structure passed by setting argsz appropriately. -Though at the same time, argsz is user provided data which is not -trusted. The argsz field allows the user app to indicate how much data -it is providing; it's still the kernel's responsibility to validate -whether it's correct and sufficient for the requested operation. - -Compatibility Checking ----------------------- -When IOMMU UAPI extension results in some structure size increase, -IOMMU UAPI code shall handle the following cases: - -1. User and kernel has exact size match -2. An older user with older kernel header (smaller UAPI size) running on a - newer kernel (larger UAPI size) -3. A newer user with newer kernel header (larger UAPI size) running - on an older kernel. -4. A malicious/misbehaving user passing illegal/invalid size but within - range. The data may contain garbage. - -Feature Checking ----------------- -While launching a guest with vIOMMU, it is strongly advised to check -the compatibility upfront, as some subsequent errors happening during -vIOMMU operation, such as cache invalidation failures cannot be nicely -escalated to the guest due to IOMMU specifications. This can lead to -catastrophic failures for the users. - -User applications such as QEMU are expected to import kernel UAPI -headers. Backward compatibility is supported per feature flags. -For example, an older QEMU (with older kernel header) can run on newer -kernel. Newer QEMU (with new kernel header) may refuse to initialize -on an older kernel if new feature flags are not supported by older -kernel. Simply recompiling existing code with newer kernel header should -not be an issue in that only existing flags are used. - -IOMMU vendor driver should report the below features to IOMMU UAPI -consumers (e.g. via VFIO). - -1. IOMMU_NESTING_FEAT_SYSWIDE_PASID -2. IOMMU_NESTING_FEAT_BIND_PGTBL -3. IOMMU_NESTING_FEAT_BIND_PASID_TABLE -4. IOMMU_NESTING_FEAT_CACHE_INVLD -5. IOMMU_NESTING_FEAT_PAGE_REQUEST - -Take VFIO as example, upon request from VFIO userspace (e.g. QEMU), -VFIO kernel code shall query IOMMU vendor driver for the support of -the above features. Query result can then be reported back to the -userspace caller. Details can be found in -Documentation/driver-api/vfio.rst. - - -Data Passing Example with VFIO ------------------------------- -As the ubiquitous userspace driver framework, VFIO is already IOMMU -aware and shares many key concepts such as device model, group, and -protection domain. Other user driver frameworks can also be extended -to support IOMMU UAPI but it is outside the scope of this document. - -In this tight-knit VFIO-IOMMU interface, the ultimate consumer of the -IOMMU UAPI data is the host IOMMU driver. VFIO facilitates user-kernel -transport, capability checking, security, and life cycle management of -process address space ID (PASID). - -VFIO layer conveys the data structures down to the IOMMU driver. It -follows the pattern below:: - - struct { - __u32 argsz; - __u32 flags; - __u8 data[]; - }; - -Here data[] contains the IOMMU UAPI data structures. VFIO has the -freedom to bundle the data as well as parse data size based on its own flags. - -In order to determine the size and feature set of the user data, argsz -and flags (or the equivalent) are also embedded in the IOMMU UAPI data -structures. - -A "__u32 argsz" field is *always* at the beginning of each structure. - -For example: -:: - - struct iommu_cache_invalidate_info { - __u32 argsz; - #define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1 - __u32 version; - /* IOMMU paging structure cache */ - #define IOMMU_CACHE_INV_TYPE_IOTLB (1 << 0) /* IOMMU IOTLB */ - #define IOMMU_CACHE_INV_TYPE_DEV_IOTLB (1 << 1) /* Device IOTLB */ - #define IOMMU_CACHE_INV_TYPE_PASID (1 << 2) /* PASID cache */ - #define IOMMU_CACHE_INV_TYPE_NR (3) - __u8 cache; - __u8 granularity; - __u8 padding[6]; - union { - struct iommu_inv_pasid_info pasid_info; - struct iommu_inv_addr_info addr_info; - } granu; - }; - -VFIO is responsible for checking its own argsz and flags. It then -invokes appropriate IOMMU UAPI functions. The user pointers are passed -to the IOMMU layer for further processing. The responsibilities are -divided as follows: - -- Generic IOMMU layer checks argsz range based on UAPI data in the - current kernel version. - -- Generic IOMMU layer checks content of the UAPI data for non-zero - reserved bits in flags, padding fields, and unsupported version. - This is to ensure not breaking userspace in the future when these - fields or flags are used. - -- Vendor IOMMU driver checks argsz based on vendor flags. UAPI data - is consumed based on flags. Vendor driver has access to - unadulterated argsz value in case of vendor specific future - extensions. Currently, it does not perform the copy_from_user() - itself. A __user pointer can be provided in some future scenarios - where there's vendor data outside of the structure definition. - -IOMMU code treats UAPI data in two categories: - -- structure contains vendor data - (Example: iommu_uapi_cache_invalidate()) - -- structure contains only generic data - (Example: iommu_uapi_sva_bind_gpasid()) - - - -Sharing UAPI with in-kernel users ---------------------------------- -For UAPIs that are shared with in-kernel users, a wrapper function is -provided to distinguish the callers. For example, - -Userspace caller :: - - int iommu_uapi_sva_unbind_gpasid(struct iommu_domain *domain, - struct device *dev, - void __user *udata) - -In-kernel caller :: - - int iommu_sva_unbind_gpasid(struct iommu_domain *domain, - struct device *dev, ioasid_t ioasid); diff --git a/Documentation/userspace-api/landlock.rst b/Documentation/userspace-api/landlock.rst index 07b63aec56fa..37dafce8038b 100644 --- a/Documentation/userspace-api/landlock.rst +++ b/Documentation/userspace-api/landlock.rst @@ -8,7 +8,7 @@ Landlock: unprivileged access control ===================================== :Author: Mickaël Salaün -:Date: April 2024 +:Date: July 2024 The goal of Landlock is to enable to restrict ambient rights (e.g. global filesystem or network access) for a set of processes. Because Landlock diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst index 2252063593bf..d706cb47b112 100644 --- a/Documentation/userspace-api/media/drivers/index.rst +++ b/Documentation/userspace-api/media/drivers/index.rst @@ -35,6 +35,6 @@ For more details see the file COPYING in the source distribution of Linux. max2175 npcm-video omap3isp-uapi - st-vgxy61 thp7312 uvcvideo + vgxy61 diff --git a/Documentation/userspace-api/media/drivers/st-vgxy61.rst b/Documentation/userspace-api/media/drivers/vgxy61.rst index 17ac15afa77c..17ac15afa77c 100644 --- a/Documentation/userspace-api/media/drivers/st-vgxy61.rst +++ b/Documentation/userspace-api/media/drivers/vgxy61.rst diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst index 786127b1e206..22bde00d42df 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst @@ -971,8 +971,8 @@ FWHT Flags - ``horizontal_scale`` - Horizontal scaling factor. * - __u8 - - ``vertical_scaling factor`` - - Vertical scale. + - ``vertical_scale`` + - Vertical scaling factor. * - __u8 - ``version`` - Bitstream version. diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 2a165ae063fb..4a379bd9e3fb 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1653,6 +1653,20 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Quantization parameter for a P frame for FWHT. Valid range: from 1 to 31. +``V4L2_CID_MPEG_VIDEO_AVERAGE_QP (integer)`` + This read-only control returns the average QP value of the currently + encoded frame. The value applies to the last dequeued capture buffer + (VIDIOC_DQBUF). Its valid range depends on the encoding format and parameters. + For H264, its valid range is from 0 to 51. + For HEVC, its valid range is from 0 to 51 for 8 bit and + from 0 to 63 for 10 bit. + For H263 and MPEG4, its valid range is from 1 to 31. + For VP8, its valid range is from 0 to 127. + For VP9, its valid range is from 0 to 255. + If the codec's MIN_QP and MAX_QP are set, then the QP will meet both requirements. + Codecs need to always use the specified range, rather then a HW custom range. + Applicable to encoders + .. raw:: latex \normalsize diff --git a/Documentation/userspace-api/media/v4l/meta-formats.rst b/Documentation/userspace-api/media/v4l/meta-formats.rst index c23aac823d2c..c6e56b5888bc 100644 --- a/Documentation/userspace-api/media/v4l/meta-formats.rst +++ b/Documentation/userspace-api/media/v4l/meta-formats.rst @@ -15,6 +15,7 @@ These formats are used for the :ref:`metadata` interface only. metafmt-d4xx metafmt-generic metafmt-intel-ipu3 + metafmt-pisp-be metafmt-rkisp1 metafmt-uvc metafmt-vivid diff --git a/Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst b/Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst new file mode 100644 index 000000000000..3281fe366c86 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst @@ -0,0 +1,56 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _v4l2-meta-fmt-rpi-be-cfg: + +************************ +V4L2_META_FMT_RPI_BE_CFG +************************ + +Raspberry Pi PiSP Back End configuration format +=============================================== + +The Raspberry Pi PiSP Back End memory-to-memory image signal processor is +configured by userspace by providing a buffer of configuration parameters +to the `pispbe-config` output video device node using the +:c:type:`v4l2_meta_format` interface. + +The PiSP Back End processes images in tiles, and its configuration requires +specifying two different sets of parameters by populating the members of +:c:type:`pisp_be_tiles_config` defined in the ``pisp_be_config.h`` header file. + +The `Raspberry Pi PiSP technical specification +<https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf>`_ +provide detailed description of the ISP back end configuration and programming +model. + +Global configuration data +------------------------- + +The global configuration data describe how the pixels in a particular image are +to be processed and is therefore shared across all the tiles of the image. So +for example, LSC (Lens Shading Correction) or Denoise parameters would be common +across all tiles from the same frame. + +Global configuration data are passed to the ISP by populating the member of +:c:type:`pisp_be_config`. + +Tile parameters +--------------- + +As the ISP processes images in tiles, each set of tiles parameters describe how +a single tile in an image is going to be processed. A single set of tile +parameters consist of 160 bytes of data and to process a batch of tiles several +sets of tiles parameters are required. + +Tiles parameters are passed to the ISP by populating the member of +``pisp_tile`` and the ``num_tiles`` fields of :c:type:`pisp_be_tiles_config`. + +Raspberry Pi PiSP Back End uAPI data types +========================================== + +This section describes the data types exposed to userspace by the Raspberry Pi +PiSP Back End. The section is informative only, for a detailed description of +each field refer to the `Raspberry Pi PiSP technical specification +<https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf>`_. + +.. kernel-doc:: include/uapi/linux/media/raspberrypi/pisp_be_config.h diff --git a/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst b/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst index 2500413e5f43..ed3eb432967d 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst @@ -20,6 +20,7 @@ orders. See also `the Wikipedia article on Bayer filter :maxdepth: 1 pixfmt-srggb8 + pixfmt-srggb8-pisp-comp pixfmt-srggb10 pixfmt-srggb10p pixfmt-srggb10alaw8 diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst index b71b80d634d6..5ed4d62df909 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst @@ -996,6 +996,60 @@ arranged in little endian order. \normalsize +16 Bits Per Component +===================== + +These formats store an RGB triplet in six bytes, with 16 bits per component +stored in memory in little endian byte order. They are named based on the order +of the RGB components as stored in memory. For instance, RGB48 stores R\ +:sub:`7:0` and R\ :sub:`15:8` in bytes 0 and 1 respectively. This differs from +the DRM format nomenclature that instead uses the order of components as seen in +the 48-bits little endian word. + +.. raw:: latex + + \small + +.. flat-table:: RGB Formats With 16 Bits Per Component + :header-rows: 1 + + * - Identifier + - Code + - Byte 0 + - Byte 1 + - Byte 2 + - Byte 3 + - Byte 4 + - Byte 5 + + * .. _V4L2-PIX-FMT-BGR48: + + - ``V4L2_PIX_FMT_BGR48`` + - 'BGR6' + + - B\ :sub:`7-0` + - B\ :sub:`15-8` + - G\ :sub:`7-0` + - G\ :sub:`15-8` + - R\ :sub:`7-0` + - R\ :sub:`15-8` + + * .. _V4L2-PIX-FMT-RGB48: + + - ``V4L2_PIX_FMT_RGB48`` + - 'RGB6' + + - R\ :sub:`7-0` + - R\ :sub:`15-8` + - G\ :sub:`7-0` + - G\ :sub:`15-8` + - B\ :sub:`7-0` + - B\ :sub:`15-8` + +.. raw:: latex + + \normalsize + Deprecated RGB Formats ====================== diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst new file mode 100644 index 000000000000..5a82a15559d6 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst @@ -0,0 +1,74 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later + +.. _v4l2-pix-fmt-pisp-comp1-rggb: +.. _v4l2-pix-fmt-pisp-comp1-grbg: +.. _v4l2-pix-fmt-pisp-comp1-gbrg: +.. _v4l2-pix-fmt-pisp-comp1-bggr: +.. _v4l2-pix-fmt-pisp-comp1-mono: +.. _v4l2-pix-fmt-pisp-comp2-rggb: +.. _v4l2-pix-fmt-pisp-comp2-grbg: +.. _v4l2-pix-fmt-pisp-comp2-gbrg: +.. _v4l2-pix-fmt-pisp-comp2-bggr: +.. _v4l2-pix-fmt-pisp-comp2-mono: + +************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************** +V4L2_PIX_FMT_PISP_COMP1_RGGB ('PC1R'), V4L2_PIX_FMT_PISP_COMP1_GRBG ('PC1G'), V4L2_PIX_FMT_PISP_COMP1_GBRG ('PC1g'), V4L2_PIX_FMT_PISP_COMP1_BGGR ('PC1B), V4L2_PIX_FMT_PISP_COMP1_MONO ('PC1M'), V4L2_PIX_FMT_PISP_COMP2_RGGB ('PC2R'), V4L2_PIX_FMT_PISP_COMP2_GRBG ('PC2G'), V4L2_PIX_FMT_PISP_COMP2_GBRG ('PC2g'), V4L2_PIX_FMT_PISP_COMP2_BGGR ('PC2B), V4L2_PIX_FMT_PISP_COMP2_MONO ('PC2M') +************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************** + +================================================ +Raspberry Pi PiSP compressed 8-bit Bayer formats +================================================ + +Description +=========== + +The Raspberry Pi ISP (PiSP) uses a family of three fixed-rate compressed Bayer +formats. A black-level offset may be subtracted to improve compression +efficiency; the nominal black level and amount of offset must be signalled out +of band. Each scanline is padded to a multiple of 8 pixels wide, and each block +of 8 horizontally-contiguous pixels is coded using 8 bytes. + +Mode 1 uses a quantization and delta-based coding scheme which preserves up to +12 significant bits. Mode 2 is a simple sqrt-like companding scheme with 6 PWL +chords, preserving up to 12 significant bits. Mode 3 combines both companding +(with 4 chords) and the delta scheme, preserving up to 14 significant bits. + +The remainder of this description applies to Modes 1 and 3. + +Each block of 8 pixels is separated into even and odd phases of 4 pixels, +coded independently by 32-bit words at successive locations in memory. +The two LS bits of each 32-bit word give its "quantization mode". + +In quantization mode 0, the lowest 321 quantization levels are multiples of +FSD/4096 and the remaining levels are successive multiples of FSD/2048. +Quantization modes 1 and 2 use linear quantization with step sizes of +FSD/1024 and FSD/512 respectively. Each of the four pixels is quantized +independently, with rounding to the nearest level. +In quantization mode 2 where the middle two samples have quantized values +(q1,q2) both in the range [384..511], they are coded using 9 bits for q1 +followed by 7 bits for (q2 & 127). Otherwise, for quantization modes +0, 1 and 2: a 9-bit field encodes MIN(q1,q2) which must be in the range +[0..511] and a 7-bit field encodes (q2-q1+64) which must be in [0..127]. + +Each of the outer samples (q0,q3) is encoded using a 7-bit field based +on its inner neighbour q1 or q2. In quantization mode 2 where the inner +sample has a quantized value in the range [448..511], the field value is +(q0-384). Otherwise for quantization modes 0, 1 and 2: The outer sample +is encoded as (q0-MAX(0,q1-64)). q3 is likewise coded based on q2. +Each of these values must be in the range [0..127]. All these fields +of 2, 9, 7, 7, 7 bits respectively are packed in little-endian order +to give a 32-bit word with LE byte order. + +Quantization mode 3 has a "7.5-bit" escape, used when none of the above +encodings will fit. Each pixel value is quantized to the nearest of 176 +levels, where the lowest 95 levels are multiples of FSD/256 and the +remaining levels are multiples of FSD/128 (level 175 represents values +very close to FSD and may require saturating arithmetic to decode). + +Each pair of quantized pixels (q0,q1) or (q2,q3) is jointly coded +by a 15-bit field: 2816*(q0>>4) + 16*q1 + (q0&15). +Three fields of 2, 15, 15 bits are packed in LE order {15,15,2}. + +An implementation of a software decoder of compressed formats is available +in `Raspberry Pi camera applications code base +<https://github.com/raspberrypi/rpicam-apps/blob/main/image/dng.cpp>`_. diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst index b3c5779521d8..74df19be91f6 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst @@ -21,9 +21,9 @@ are often referred to as greyscale formats. .. raw:: latex - \scriptsize + \tiny -.. tabularcolumns:: |p{3.6cm}|p{3.0cm}|p{1.3cm}|p{2.6cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}| +.. tabularcolumns:: |p{3.6cm}|p{2.4cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}| .. flat-table:: Luma-Only Image Formats :header-rows: 1 @@ -209,3 +209,7 @@ are often referred to as greyscale formats. For Y012 and Y12 formats, Y012 places its data in the 12 high bits, with padding zeros in the 4 low bits, in contrast to the Y12 format, which has its padding located in the most significant bits of the 16 bit word. + + The 'P' variations of the Y10, Y12 and Y14 formats are packed according to + the RAW10, RAW12 and RAW14 packing scheme as defined by the MIPI CSI-2 + specification. diff --git a/Documentation/virt/coco/sev-guest.rst b/Documentation/virt/coco/sev-guest.rst index e1eaf6a830ce..93debceb6eb0 100644 --- a/Documentation/virt/coco/sev-guest.rst +++ b/Documentation/virt/coco/sev-guest.rst @@ -176,6 +176,25 @@ to SNP_CONFIG command defined in the SEV-SNP spec. The current values of the firmware parameters affected by this command can be queried via SNP_PLATFORM_STATUS. +2.7 SNP_VLEK_LOAD +----------------- +:Technology: sev-snp +:Type: hypervisor ioctl cmd +:Parameters (in): struct sev_user_data_snp_vlek_load +:Returns (out): 0 on success, -negative on error + +When requesting an attestation report a guest is able to specify whether +it wants SNP firmware to sign the report using either a Versioned Chip +Endorsement Key (VCEK), which is derived from chip-unique secrets, or a +Versioned Loaded Endorsement Key (VLEK) which is obtained from an AMD +Key Derivation Service (KDS) and derived from seeds allocated to +enrolled cloud service providers. + +In the case of VLEK keys, the SNP_VLEK_LOAD SNP command is used to load +them into the system after obtaining them from the KDS, and corresponds +closely to the SNP_VLEK_LOAD firmware command specified in the SEV-SNP +spec. + 3. SEV-SNP CPUID Enforcement ============================ @@ -204,6 +223,17 @@ has taken care to make use of the SEV-SNP CPUID throughout all stages of boot. Otherwise, guest owner attestation provides no assurance that the kernel wasn't fed incorrect values at some point during boot. +4. SEV Guest Driver Communication Key +===================================== + +Communication between an SEV guest and the SEV firmware in the AMD Secure +Processor (ASP, aka PSP) is protected by a VM Platform Communication Key +(VMPCK). By default, the sev-guest driver uses the VMPCK associated with the +VM Privilege Level (VMPL) at which the guest is running. Should this key be +wiped by the sev-guest driver (see the driver for reasons why a VMPCK can be +wiped), a different key can be used by reloading the sev-guest driver and +specifying the desired key using the vmpck_id module parameter. + Reference --------- diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index a71d91978d9e..33938468d62d 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -891,12 +891,12 @@ like this:: The irq_type field has the following values: -- irq_type[0]: +- KVM_ARM_IRQ_TYPE_CPU: out-of-kernel GIC: irq_id 0 is IRQ, irq_id 1 is FIQ -- irq_type[1]: +- KVM_ARM_IRQ_TYPE_SPI: in-kernel GIC: SPI, irq_id between 32 and 1019 (incl.) (the vcpu_index field is ignored) -- irq_type[2]: +- KVM_ARM_IRQ_TYPE_PPI: in-kernel GIC: PPI, irq_id between 16 and 31 (incl.) (The irq_id field thus corresponds nicely to the IRQ ID in the ARM GIC specs) @@ -1403,6 +1403,12 @@ Instead, an abort (data abort if the cause of the page-table update was a load or a store, instruction abort if it was an instruction fetch) is injected in the guest. +S390: +^^^^^ + +Returns -EINVAL if the VM has the KVM_VM_S390_UCONTROL flag set. +Returns -EINVAL if called on a protected VM. + 4.36 KVM_SET_TSS_ADDR --------------------- @@ -1921,7 +1927,7 @@ flags: If KVM_MSI_VALID_DEVID is set, devid contains a unique device identifier for the device that wrote the MSI message. For PCI, this is usually a -BFD identifier in the lower 16 bits. +BDF identifier in the lower 16 bits. On x86, address_hi is ignored unless the KVM_X2APIC_API_USE_32BIT_IDS feature of KVM_CAP_X2APIC_API capability is enabled. If it is enabled, @@ -2439,8 +2445,11 @@ registers, find a list below: PPC KVM_REG_PPC_PSSCR 64 PPC KVM_REG_PPC_DEC_EXPIRY 64 PPC KVM_REG_PPC_PTCR 64 + PPC KVM_REG_PPC_HASHKEYR 64 + PPC KVM_REG_PPC_HASHPKEYR 64 PPC KVM_REG_PPC_DAWR1 64 PPC KVM_REG_PPC_DAWRX1 64 + PPC KVM_REG_PPC_DEXCR 64 PPC KVM_REG_PPC_TM_GPR0 64 ... PPC KVM_REG_PPC_TM_GPR31 64 @@ -2986,7 +2995,7 @@ flags: If KVM_MSI_VALID_DEVID is set, devid contains a unique device identifier for the device that wrote the MSI message. For PCI, this is usually a -BFD identifier in the lower 16 bits. +BDF identifier in the lower 16 bits. On x86, address_hi is ignored unless the KVM_X2APIC_API_USE_32BIT_IDS feature of KVM_CAP_X2APIC_API capability is enabled. If it is enabled, @@ -6273,6 +6282,12 @@ state. At VM creation time, all memory is shared, i.e. the PRIVATE attribute is '0' for all gfns. Userspace can control whether memory is shared/private by toggling KVM_MEMORY_ATTRIBUTE_PRIVATE via KVM_SET_MEMORY_ATTRIBUTES as needed. +S390: +^^^^^ + +Returns -EINVAL if the VM has the KVM_VM_S390_UCONTROL flag set. +Returns -EINVAL if called on a protected VM. + 4.141 KVM_SET_MEMORY_ATTRIBUTES ------------------------------- @@ -6352,6 +6367,67 @@ a single guest_memfd file, but the bound ranges must not overlap). See KVM_SET_USER_MEMORY_REGION2 for additional details. +4.143 KVM_PRE_FAULT_MEMORY +--------------------------- + +:Capability: KVM_CAP_PRE_FAULT_MEMORY +:Architectures: none +:Type: vcpu ioctl +:Parameters: struct kvm_pre_fault_memory (in/out) +:Returns: 0 if at least one page is processed, < 0 on error + +Errors: + + ========== =============================================================== + EINVAL The specified `gpa` and `size` were invalid (e.g. not + page aligned, causes an overflow, or size is zero). + ENOENT The specified `gpa` is outside defined memslots. + EINTR An unmasked signal is pending and no page was processed. + EFAULT The parameter address was invalid. + EOPNOTSUPP Mapping memory for a GPA is unsupported by the + hypervisor, and/or for the current vCPU state/mode. + EIO unexpected error conditions (also causes a WARN) + ========== =============================================================== + +:: + + struct kvm_pre_fault_memory { + /* in/out */ + __u64 gpa; + __u64 size; + /* in */ + __u64 flags; + __u64 padding[5]; + }; + +KVM_PRE_FAULT_MEMORY populates KVM's stage-2 page tables used to map memory +for the current vCPU state. KVM maps memory as if the vCPU generated a +stage-2 read page fault, e.g. faults in memory as needed, but doesn't break +CoW. However, KVM does not mark any newly created stage-2 PTE as Accessed. + +In the case of confidential VM types where there is an initial set up of +private guest memory before the guest is 'finalized'/measured, this ioctl +should only be issued after completing all the necessary setup to put the +guest into a 'finalized' state so that the above semantics can be reliably +ensured. + +In some cases, multiple vCPUs might share the page tables. In this +case, the ioctl can be called in parallel. + +When the ioctl returns, the input values are updated to point to the +remaining range. If `size` > 0 on return, the caller can just issue +the ioctl again with the same `struct kvm_map_memory` argument. + +Shadow page tables cannot support this ioctl because they +are indexed by virtual address or nested guest physical address. +Calling this ioctl when the guest is using shadow page tables (for +example because it is running a nested guest with nested page tables) +will fail with `EOPNOTSUPP` even if `KVM_CHECK_EXTENSION` reports +the capability to be present. + +`flags` must currently be zero. + + 5. The kvm_run structure ======================== @@ -6416,9 +6492,12 @@ More architecture-specific flags detailing state of the VCPU that may affect the device's behavior. Current defined flags:: /* x86, set if the VCPU is in system management mode */ - #define KVM_RUN_X86_SMM (1 << 0) + #define KVM_RUN_X86_SMM (1 << 0) /* x86, set if bus lock detected in VM */ - #define KVM_RUN_BUS_LOCK (1 << 1) + #define KVM_RUN_X86_BUS_LOCK (1 << 1) + /* x86, set if the VCPU is executing a nested (L2) guest */ + #define KVM_RUN_X86_GUEST_MODE (1 << 2) + /* arm64, set for KVM_EXIT_DEBUG */ #define KVM_DEBUG_ARCH_HSR_HIGH_VALID (1 << 0) @@ -7764,29 +7843,31 @@ Valid bits in args[0] are:: #define KVM_BUS_LOCK_DETECTION_OFF (1 << 0) #define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1) -Enabling this capability on a VM provides userspace with a way to select -a policy to handle the bus locks detected in guest. Userspace can obtain -the supported modes from the result of KVM_CHECK_EXTENSION and define it -through the KVM_ENABLE_CAP. +Enabling this capability on a VM provides userspace with a way to select a +policy to handle the bus locks detected in guest. Userspace can obtain the +supported modes from the result of KVM_CHECK_EXTENSION and define it through +the KVM_ENABLE_CAP. The supported modes are mutually-exclusive. -KVM_BUS_LOCK_DETECTION_OFF and KVM_BUS_LOCK_DETECTION_EXIT are supported -currently and mutually exclusive with each other. More bits can be added in -the future. +This capability allows userspace to force VM exits on bus locks detected in the +guest, irrespective whether or not the host has enabled split-lock detection +(which triggers an #AC exception that KVM intercepts). This capability is +intended to mitigate attacks where a malicious/buggy guest can exploit bus +locks to degrade the performance of the whole system. -With KVM_BUS_LOCK_DETECTION_OFF set, bus locks in guest will not cause vm exits -so that no additional actions are needed. This is the default mode. +If KVM_BUS_LOCK_DETECTION_OFF is set, KVM doesn't force guest bus locks to VM +exit, although the host kernel's split-lock #AC detection still applies, if +enabled. -With KVM_BUS_LOCK_DETECTION_EXIT set, vm exits happen when bus lock detected -in VM. KVM just exits to userspace when handling them. Userspace can enforce -its own throttling or other policy based mitigations. +If KVM_BUS_LOCK_DETECTION_EXIT is set, KVM enables a CPU feature that ensures +bus locks in the guest trigger a VM exit, and KVM exits to userspace for all +such VM exits, e.g. to allow userspace to throttle the offending guest and/or +apply some other policy-based mitigation. When exiting to userspace, KVM sets +KVM_RUN_X86_BUS_LOCK in vcpu-run->flags, and conditionally sets the exit_reason +to KVM_EXIT_X86_BUS_LOCK. -This capability is aimed to address the thread that VM can exploit bus locks to -degree the performance of the whole system. Once the userspace enable this -capability and select the KVM_BUS_LOCK_DETECTION_EXIT mode, KVM will set the -KVM_RUN_BUS_LOCK flag in vcpu-run->flags field and exit to userspace. Concerning -the bus lock vm exit can be preempted by a higher priority VM exit, the exit -notifications to userspace can be KVM_EXIT_BUS_LOCK or other reasons. -KVM_RUN_BUS_LOCK flag is used to distinguish between them. +Note! Detected bus locks may be coincident with other exits to userspace, i.e. +KVM_RUN_X86_BUS_LOCK should be checked regardless of the primary exit reason if +userspace wants to take action on all detected bus locks. 7.23 KVM_CAP_PPC_DAWR1 ---------------------- @@ -7902,10 +7983,10 @@ perform a bulk copy of tags to/from the guest. 7.29 KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM ------------------------------------- -Architectures: x86 SEV enabled -Type: vm -Parameters: args[0] is the fd of the source vm -Returns: 0 on success +:Architectures: x86 SEV enabled +:Type: vm +:Parameters: args[0] is the fd of the source vm +:Returns: 0 on success This capability enables userspace to migrate the encryption context from the VM indicated by the fd to the VM this is called on. @@ -7953,7 +8034,11 @@ The valid bits in cap.args[0] are: When this quirk is disabled, the reset value is 0x10000 (APIC_LVT_MASKED). - KVM_X86_QUIRK_CD_NW_CLEARED By default, KVM clears CR0.CD and CR0.NW. + KVM_X86_QUIRK_CD_NW_CLEARED By default, KVM clears CR0.CD and CR0.NW on + AMD CPUs to workaround buggy guest firmware + that runs in perpetuity with CR0.CD, i.e. + with caches in "no fill" mode. + When this quirk is disabled, KVM does not change the value of CR0.CD and CR0.NW. @@ -8070,6 +8155,37 @@ error/annotated fault. See KVM_EXIT_MEMORY_FAULT for more information. +7.35 KVM_CAP_X86_APIC_BUS_CYCLES_NS +----------------------------------- + +:Architectures: x86 +:Target: VM +:Parameters: args[0] is the desired APIC bus clock rate, in nanoseconds +:Returns: 0 on success, -EINVAL if args[0] contains an invalid value for the + frequency or if any vCPUs have been created, -ENXIO if a virtual + local APIC has not been created using KVM_CREATE_IRQCHIP. + +This capability sets the VM's APIC bus clock frequency, used by KVM's in-kernel +virtual APIC when emulating APIC timers. KVM's default value can be retrieved +by KVM_CHECK_EXTENSION. + +Note: Userspace is responsible for correctly configuring CPUID 0x15, a.k.a. the +core crystal clock frequency, if a non-zero CPUID 0x15 is exposed to the guest. + +7.36 KVM_CAP_X86_GUEST_MODE +------------------------------ + +:Architectures: x86 +:Returns: Informational only, -EINVAL on direct KVM_ENABLE_CAP. + +The presence of this capability indicates that KVM_RUN will update the +KVM_RUN_X86_GUEST_MODE bit in kvm_run.flags to indicate whether the +vCPU was executing nested guest code when it exited. + +KVM exits with the register state of either the L1 or L2 guest +depending on which executed at the time of an exit. Userspace must +take care to differentiate between these cases. + 8. Other capabilities. ====================== diff --git a/Documentation/virt/kvm/devices/arm-vgic.rst b/Documentation/virt/kvm/devices/arm-vgic.rst index 40bdeea1d86e..19f0c6756891 100644 --- a/Documentation/virt/kvm/devices/arm-vgic.rst +++ b/Documentation/virt/kvm/devices/arm-vgic.rst @@ -31,7 +31,7 @@ Groups: KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit) Base address in the guest physical address space of the GIC virtual cpu interface register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2. - This address needs to be 4K aligned and the region covers 4 KByte. + This address needs to be 4K aligned and the region covers 8 KByte. Errors: diff --git a/Documentation/virt/kvm/halt-polling.rst b/Documentation/virt/kvm/halt-polling.rst index c82a04b709b4..a6790a67e205 100644 --- a/Documentation/virt/kvm/halt-polling.rst +++ b/Documentation/virt/kvm/halt-polling.rst @@ -79,11 +79,11 @@ adjustment of the polling interval. Module Parameters ================= -The kvm module has 3 tuneable module parameters to adjust the global max -polling interval as well as the rate at which the polling interval is grown and -shrunk. These variables are defined in include/linux/kvm_host.h and as module -parameters in virt/kvm/kvm_main.c, or arch/powerpc/kvm/book3s_hv.c in the -powerpc kvm-hv case. +The kvm module has 4 tunable module parameters to adjust the global max polling +interval, the initial value (to grow from 0), and the rate at which the polling +interval is grown and shrunk. These variables are defined in +include/linux/kvm_host.h and as module parameters in virt/kvm/kvm_main.c, or +arch/powerpc/kvm/book3s_hv.c in the powerpc kvm-hv case. +-----------------------+---------------------------+-------------------------+ |Module Parameter | Description | Default Value | @@ -105,7 +105,7 @@ powerpc kvm-hv case. | | grow_halt_poll_ns() | | | | function. | | +-----------------------+---------------------------+-------------------------+ -|halt_poll_ns_shrink | The value by which the | 0 | +|halt_poll_ns_shrink | The value by which the | 2 | | | halt polling interval is | | | | divided in the | | | | shrink_halt_poll_ns() | | diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst index 9677a0714a39..1ddb6a86ce7f 100644 --- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst @@ -466,6 +466,112 @@ issued by the hypervisor to make the guest ready for execution. Returns: 0 on success, -negative on error +18. KVM_SEV_SNP_LAUNCH_START +---------------------------- + +The KVM_SNP_LAUNCH_START command is used for creating the memory encryption +context for the SEV-SNP guest. It must be called prior to issuing +KVM_SEV_SNP_LAUNCH_UPDATE or KVM_SEV_SNP_LAUNCH_FINISH; + +Parameters (in): struct kvm_sev_snp_launch_start + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_snp_launch_start { + __u64 policy; /* Guest policy to use. */ + __u8 gosvw[16]; /* Guest OS visible workarounds. */ + __u16 flags; /* Must be zero. */ + __u8 pad0[6]; + __u64 pad1[4]; + }; + +See SNP_LAUNCH_START in the SEV-SNP specification [snp-fw-abi]_ for further +details on the input parameters in ``struct kvm_sev_snp_launch_start``. + +19. KVM_SEV_SNP_LAUNCH_UPDATE +----------------------------- + +The KVM_SEV_SNP_LAUNCH_UPDATE command is used for loading userspace-provided +data into a guest GPA range, measuring the contents into the SNP guest context +created by KVM_SEV_SNP_LAUNCH_START, and then encrypting/validating that GPA +range so that it will be immediately readable using the encryption key +associated with the guest context once it is booted, after which point it can +attest the measurement associated with its context before unlocking any +secrets. + +It is required that the GPA ranges initialized by this command have had the +KVM_MEMORY_ATTRIBUTE_PRIVATE attribute set in advance. See the documentation +for KVM_SET_MEMORY_ATTRIBUTES for more details on this aspect. + +Upon success, this command is not guaranteed to have processed the entire +range requested. Instead, the ``gfn_start``, ``uaddr``, and ``len`` fields of +``struct kvm_sev_snp_launch_update`` will be updated to correspond to the +remaining range that has yet to be processed. The caller should continue +calling this command until those fields indicate the entire range has been +processed, e.g. ``len`` is 0, ``gfn_start`` is equal to the last GFN in the +range plus 1, and ``uaddr`` is the last byte of the userspace-provided source +buffer address plus 1. In the case where ``type`` is KVM_SEV_SNP_PAGE_TYPE_ZERO, +``uaddr`` will be ignored completely. + +Parameters (in): struct kvm_sev_snp_launch_update + +Returns: 0 on success, < 0 on error, -EAGAIN if caller should retry + +:: + + struct kvm_sev_snp_launch_update { + __u64 gfn_start; /* Guest page number to load/encrypt data into. */ + __u64 uaddr; /* Userspace address of data to be loaded/encrypted. */ + __u64 len; /* 4k-aligned length in bytes to copy into guest memory.*/ + __u8 type; /* The type of the guest pages being initialized. */ + __u8 pad0; + __u16 flags; /* Must be zero. */ + __u32 pad1; + __u64 pad2[4]; + + }; + +where the allowed values for page_type are #define'd as:: + + KVM_SEV_SNP_PAGE_TYPE_NORMAL + KVM_SEV_SNP_PAGE_TYPE_ZERO + KVM_SEV_SNP_PAGE_TYPE_UNMEASURED + KVM_SEV_SNP_PAGE_TYPE_SECRETS + KVM_SEV_SNP_PAGE_TYPE_CPUID + +See the SEV-SNP spec [snp-fw-abi]_ for further details on how each page type is +used/measured. + +20. KVM_SEV_SNP_LAUNCH_FINISH +----------------------------- + +After completion of the SNP guest launch flow, the KVM_SEV_SNP_LAUNCH_FINISH +command can be issued to make the guest ready for execution. + +Parameters (in): struct kvm_sev_snp_launch_finish + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_snp_launch_finish { + __u64 id_block_uaddr; + __u64 id_auth_uaddr; + __u8 id_block_en; + __u8 auth_key_en; + __u8 vcek_disabled; + __u8 host_data[32]; + __u8 pad0[3]; + __u16 flags; /* Must be zero */ + __u64 pad1[4]; + }; + + +See SNP_LAUNCH_FINISH in the SEV-SNP specification [snp-fw-abi]_ for further +details on the input parameters in ``struct kvm_sev_snp_launch_finish``. + Device attribute API ==================== @@ -497,9 +603,11 @@ References ========== -See [white-paper]_, [api-spec]_, [amd-apm]_ and [kvm-forum]_ for more info. +See [white-paper]_, [api-spec]_, [amd-apm]_, [kvm-forum]_, and [snp-fw-abi]_ +for more info. .. [white-paper] https://developer.amd.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf .. [api-spec] https://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf .. [amd-apm] https://support.amd.com/TechDocs/24593.pdf (section 15.34) .. [kvm-forum] https://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf +.. [snp-fw-abi] https://www.amd.com/system/files/TechDocs/56860.pdf diff --git a/Documentation/virt/kvm/x86/errata.rst b/Documentation/virt/kvm/x86/errata.rst index 49a05f24747b..4116045a8744 100644 --- a/Documentation/virt/kvm/x86/errata.rst +++ b/Documentation/virt/kvm/x86/errata.rst @@ -48,3 +48,21 @@ have the same physical APIC ID, KVM will deliver events targeting that APIC ID only to the vCPU with the lowest vCPU ID. If KVM_X2APIC_API_USE_32BIT_IDS is not enabled, KVM follows x86 architecture when processing interrupts (all vCPUs matching the target APIC ID receive the interrupt). + +MTRRs +----- +KVM does not virtualize guest MTRR memory types. KVM emulates accesses to MTRR +MSRs, i.e. {RD,WR}MSR in the guest will behave as expected, but KVM does not +honor guest MTRRs when determining the effective memory type, and instead +treats all of guest memory as having Writeback (WB) MTRRs. + +CR0.CD +------ +KVM does not virtualize CR0.CD on Intel CPUs. Similar to MTRR MSRs, KVM +emulates CR0.CD accesses so that loads and stores from/to CR0 behave as +expected, but setting CR0.CD=1 has no impact on the cachaeability of guest +memory. + +Note, this erratum does not affect AMD CPUs, which fully virtualize CR0.CD in +hardware, i.e. put the CPU caches into "no fill" mode when CR0.CD=1, even when +running in the guest.
\ No newline at end of file diff --git a/Documentation/virt/uml/user_mode_linux_howto_v2.rst b/Documentation/virt/uml/user_mode_linux_howto_v2.rst index d1cfe415e4c4..27942446f406 100644 --- a/Documentation/virt/uml/user_mode_linux_howto_v2.rst +++ b/Documentation/virt/uml/user_mode_linux_howto_v2.rst @@ -223,8 +223,6 @@ remote UML and other VM instances. +-----------+--------+------------------------------------+------------+ | socket | legacy | none | ~ 450Mbit | +-----------+--------+------------------------------------+------------+ -| pcap | legacy | rx only | ~ 450Mbit | -+-----------+--------+------------------------------------+------------+ | ethertap | legacy | obsolete | ~ 500Mbit | +-----------+--------+------------------------------------+------------+ | vde | legacy | obsolete | ~ 500Mbit | diff --git a/Documentation/wmi/devices/msi-wmi-platform.rst b/Documentation/wmi/devices/msi-wmi-platform.rst index 29b1b2e6d42c..31a136942892 100644 --- a/Documentation/wmi/devices/msi-wmi-platform.rst +++ b/Documentation/wmi/devices/msi-wmi-platform.rst @@ -130,12 +130,12 @@ data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: Due to a peculiarity in how Windows handles the ``CreateByteField()`` ACPI operator (errors only happen when a invalid byte field is ultimately accessed), all methods require a 32 byte input -buffer, even if the Binay MOF says otherwise. +buffer, even if the Binary MOF says otherwise. The input buffer contains a single byte to select the subfeature to be accessed and 31 bytes of input data, the meaning of which depends on the subfeature being accessed. -The output buffer contains a singe byte which signals success or failure (``0x00`` on failure) +The output buffer contains a single byte which signals success or failure (``0x00`` on failure) and 31 bytes of output data, the meaning if which depends on the subfeature being accessed. WMI method Get_EC() @@ -147,7 +147,7 @@ data contains a flag byte and a 28 byte controller firmware version string. The first 4 bits of the flag byte contain the minor version of the embedded controller interface, with the next 2 bits containing the major version of the embedded controller interface. -The 7th bit signals if the embedded controller page chaged (exact meaning is unknown), and the +The 7th bit signals if the embedded controller page changed (exact meaning is unknown), and the last bit signals if the platform is a Tigerlake platform. The MSI software seems to only use this interface when the last bit is set. |