diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 75 | ||||
-rw-r--r-- | Documentation/mm/slub.rst | 60 |
2 files changed, 62 insertions, 73 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b3b5ce13de2b..26534c8e927a 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -3771,10 +3771,6 @@ no5lvl [X86-64,RISCV,EARLY] Disable 5-level paging mode. Forces kernel to use 4-level paging instead. - noaliencache [MM, NUMA, SLAB] Disables the allocation of alien - caches in the slab allocator. Saves per-node memory, - but will impact performance. - noalign [KNL,ARM] noaltinstr [S390,EARLY] Disables alternative instructions @@ -5930,65 +5926,58 @@ simeth= [IA-64] simscsi= - slram= [HW,MTD] - - slab_merge [MM] - Enable merging of slabs with similar size when the - kernel is built without CONFIG_SLAB_MERGE_DEFAULT. - - slab_nomerge [MM] - Disable merging of slabs with similar size. May be - necessary if there is some reason to distinguish - allocs to different slabs, especially in hardened - environments where the risk of heap overflows and - layout control by attackers can usually be - frustrated by disabling merging. This will reduce - most of the exposure of a heap attack to a single - cache (risks via metadata attacks are mostly - unchanged). Debug options disable merging on their - own. - For more information see Documentation/mm/slub.rst. - - slab_max_order= [MM, SLAB] - Determines the maximum allowed order for slabs. - A high setting may cause OOMs due to memory - fragmentation. Defaults to 1 for systems with - more than 32MB of RAM, 0 otherwise. - - slub_debug[=options[,slabs][;[options[,slabs]]...] [MM, SLUB] - Enabling slub_debug allows one to determine the + slab_debug[=options[,slabs][;[options[,slabs]]...] [MM] + Enabling slab_debug allows one to determine the culprit if slab objects become corrupted. Enabling - slub_debug can create guard zones around objects and + slab_debug can create guard zones around objects and may poison objects when not in use. Also tracks the last alloc / free. For more information see Documentation/mm/slub.rst. + (slub_debug legacy name also accepted for now) - slub_max_order= [MM, SLUB] + slab_max_order= [MM] Determines the maximum allowed order for slabs. A high setting may cause OOMs due to memory fragmentation. For more information see Documentation/mm/slub.rst. + (slub_max_order legacy name also accepted for now) + + slab_merge [MM] + Enable merging of slabs with similar size when the + kernel is built without CONFIG_SLAB_MERGE_DEFAULT. + (slub_merge legacy name also accepted for now) - slub_min_objects= [MM, SLUB] + slab_min_objects= [MM] The minimum number of objects per slab. SLUB will - increase the slab order up to slub_max_order to + increase the slab order up to slab_max_order to generate a sufficiently large slab able to contain the number of objects indicated. The higher the number of objects the smaller the overhead of tracking slabs and the less frequently locks need to be acquired. For more information see Documentation/mm/slub.rst. + (slub_min_objects legacy name also accepted for now) - slub_min_order= [MM, SLUB] + slab_min_order= [MM] Determines the minimum page order for slabs. Must be - lower than slub_max_order. - For more information see Documentation/mm/slub.rst. + lower or equal to slab_max_order. For more information see + Documentation/mm/slub.rst. + (slub_min_order legacy name also accepted for now) - slub_merge [MM, SLUB] - Same with slab_merge. + slab_nomerge [MM] + Disable merging of slabs with similar size. May be + necessary if there is some reason to distinguish + allocs to different slabs, especially in hardened + environments where the risk of heap overflows and + layout control by attackers can usually be + frustrated by disabling merging. This will reduce + most of the exposure of a heap attack to a single + cache (risks via metadata attacks are mostly + unchanged). Debug options disable merging on their + own. + For more information see Documentation/mm/slub.rst. + (slub_nomerge legacy name also accepted for now) - slub_nomerge [MM, SLUB] - Same with slab_nomerge. This is supported for legacy. - See slab_nomerge for more information. + slram= [HW,MTD] smart2= [HW] Format: <io1>[,<io2>[,...,<io8>]] diff --git a/Documentation/mm/slub.rst b/Documentation/mm/slub.rst index be75971532f5..b517ee28a955 100644 --- a/Documentation/mm/slub.rst +++ b/Documentation/mm/slub.rst @@ -9,7 +9,7 @@ SLUB can enable debugging only for selected slabs in order to avoid an impact on overall system performance which may make a bug more difficult to find. -In order to switch debugging on one can add an option ``slub_debug`` +In order to switch debugging on one can add an option ``slab_debug`` to the kernel command line. That will enable full debugging for all slabs. @@ -26,16 +26,16 @@ be enabled on the command line. F.e. no tracking information will be available without debugging on and validation can only partially be performed if debugging was not switched on. -Some more sophisticated uses of slub_debug: +Some more sophisticated uses of slab_debug: ------------------------------------------- -Parameters may be given to ``slub_debug``. If none is specified then full +Parameters may be given to ``slab_debug``. If none is specified then full debugging is enabled. Format: -slub_debug=<Debug-Options> +slab_debug=<Debug-Options> Enable options for all slabs -slub_debug=<Debug-Options>,<slab name1>,<slab name2>,... +slab_debug=<Debug-Options>,<slab name1>,<slab name2>,... Enable options only for select slabs (no spaces after a comma) @@ -60,23 +60,23 @@ Possible debug options are:: F.e. in order to boot just with sanity checks and red zoning one would specify:: - slub_debug=FZ + slab_debug=FZ Trying to find an issue in the dentry cache? Try:: - slub_debug=,dentry + slab_debug=,dentry to only enable debugging on the dentry cache. You may use an asterisk at the end of the slab name, in order to cover all slabs with the same prefix. For example, here's how you can poison the dentry cache as well as all kmalloc slabs:: - slub_debug=P,kmalloc-*,dentry + slab_debug=P,kmalloc-*,dentry Red zoning and tracking may realign the slab. We can just apply sanity checks to the dentry cache with:: - slub_debug=F,dentry + slab_debug=F,dentry Debugging options may require the minimum possible slab order to increase as a result of storing the metadata (for example, caches with PAGE_SIZE object @@ -84,20 +84,20 @@ sizes). This has a higher liklihood of resulting in slab allocation errors in low memory situations or if there's high fragmentation of memory. To switch off debugging for such caches by default, use:: - slub_debug=O + slab_debug=O You can apply different options to different list of slab names, using blocks of options. This will enable red zoning for dentry and user tracking for kmalloc. All other slabs will not get any debugging enabled:: - slub_debug=Z,dentry;U,kmalloc-* + slab_debug=Z,dentry;U,kmalloc-* You can also enable options (e.g. sanity checks and poisoning) for all caches except some that are deemed too performance critical and don't need to be debugged by specifying global debug options followed by a list of slab names with "-" as options:: - slub_debug=FZ;-,zs_handle,zspage + slab_debug=FZ;-,zs_handle,zspage The state of each debug option for a slab can be found in the respective files under:: @@ -105,7 +105,7 @@ under:: /sys/kernel/slab/<slab name>/ If the file contains 1, the option is enabled, 0 means disabled. The debug -options from the ``slub_debug`` parameter translate to the following files:: +options from the ``slab_debug`` parameter translate to the following files:: F sanity_checks Z red_zone @@ -129,7 +129,7 @@ in order to reduce overhead and increase cache hotness of objects. Slab validation =============== -SLUB can validate all object if the kernel was booted with slub_debug. In +SLUB can validate all object if the kernel was booted with slab_debug. In order to do so you must have the ``slabinfo`` tool. Then you can do :: @@ -150,29 +150,29 @@ list_lock once in a while to deal with partial slabs. That overhead is governed by the order of the allocation for each slab. The allocations can be influenced by kernel parameters: -.. slub_min_objects=x (default 4) -.. slub_min_order=x (default 0) -.. slub_max_order=x (default 3 (PAGE_ALLOC_COSTLY_ORDER)) +.. slab_min_objects=x (default: automatically scaled by number of cpus) +.. slab_min_order=x (default 0) +.. slab_max_order=x (default 3 (PAGE_ALLOC_COSTLY_ORDER)) -``slub_min_objects`` +``slab_min_objects`` allows to specify how many objects must at least fit into one slab in order for the allocation order to be acceptable. In general slub will be able to perform this number of allocations on a slab without consulting centralized resources (list_lock) where contention may occur. -``slub_min_order`` +``slab_min_order`` specifies a minimum order of slabs. A similar effect like - ``slub_min_objects``. + ``slab_min_objects``. -``slub_max_order`` - specified the order at which ``slub_min_objects`` should no +``slab_max_order`` + specified the order at which ``slab_min_objects`` should no longer be checked. This is useful to avoid SLUB trying to - generate super large order pages to fit ``slub_min_objects`` + generate super large order pages to fit ``slab_min_objects`` of a slab cache with large object sizes into one high order page. Setting command line parameter ``debug_guardpage_minorder=N`` (N > 0), forces setting - ``slub_max_order`` to 0, what cause minimum possible order of + ``slab_max_order`` to 0, what cause minimum possible order of slabs allocation. SLUB Debug output @@ -219,7 +219,7 @@ Here is a sample of slub debug output:: FIX kmalloc-8: Restoring Redzone 0xc90f6d28-0xc90f6d2b=0xcc If SLUB encounters a corrupted object (full detection requires the kernel -to be booted with slub_debug) then the following output will be dumped +to be booted with slab_debug) then the following output will be dumped into the syslog: 1. Description of the problem encountered @@ -239,7 +239,7 @@ into the syslog: pid=<pid of the process> (Object allocation / free information is only available if SLAB_STORE_USER is - set for the slab. slub_debug sets that option) + set for the slab. slab_debug sets that option) 2. The object contents if an object was involved. @@ -262,7 +262,7 @@ into the syslog: the object boundary. (Redzone information is only available if SLAB_RED_ZONE is set. - slub_debug sets that option) + slab_debug sets that option) Padding <address> : <bytes> Unused data to fill up the space in order to get the next object @@ -296,7 +296,7 @@ Emergency operations Minimal debugging (sanity checks alone) can be enabled by booting with:: - slub_debug=F + slab_debug=F This will be generally be enough to enable the resiliency features of slub which will keep the system running even if a bad kernel component will @@ -311,13 +311,13 @@ and enabling debugging only for that cache I.e.:: - slub_debug=F,dentry + slab_debug=F,dentry If the corruption occurs by writing after the end of the object then it may be advisable to enable a Redzone to avoid corrupting the beginning of other objects:: - slub_debug=FZ,dentry + slab_debug=FZ,dentry Extended slabinfo mode and plotting =================================== |