diff options
Diffstat (limited to 'Documentation')
40 files changed, 500 insertions, 179 deletions
diff --git a/Documentation/ABI/testing/debugfs-moxtet b/Documentation/ABI/testing/debugfs-moxtet index 6eee10c3d5a1..637d8587d03d 100644 --- a/Documentation/ABI/testing/debugfs-moxtet +++ b/Documentation/ABI/testing/debugfs-moxtet @@ -1,7 +1,7 @@ What: /sys/kernel/debug/moxtet/input Date: March 2019 KernelVersion: 5.3 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) Read input from the shift registers, in hexadecimal. Returns N+1 bytes, where N is the number of Moxtet connected modules. The first byte is from the CPU board itself. @@ -19,7 +19,7 @@ Description: (Read) Read input from the shift registers, in hexadecimal. What: /sys/kernel/debug/moxtet/output Date: March 2019 KernelVersion: 5.3 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (RW) Read last written value to the shift registers, in hexadecimal, or write values to the shift registers, also in hexadecimal. diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm index 326df1b74707..813987d5de4e 100644 --- a/Documentation/ABI/testing/debugfs-turris-mox-rwtm +++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm @@ -1,7 +1,7 @@ What: /sys/kernel/debug/turris-mox-rwtm/do_sign Date: Jun 2020 KernelVersion: 5.8 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: ======= =========================================================== diff --git a/Documentation/ABI/testing/sysfs-bus-moxtet-devices b/Documentation/ABI/testing/sysfs-bus-moxtet-devices index 4a6d61b44f3f..32dccc00d57d 100644 --- a/Documentation/ABI/testing/sysfs-bus-moxtet-devices +++ b/Documentation/ABI/testing/sysfs-bus-moxtet-devices @@ -1,17 +1,17 @@ What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_description Date: March 2019 KernelVersion: 5.3 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) Moxtet module description. Format: string What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_id Date: March 2019 KernelVersion: 5.3 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) Moxtet module ID. Format: %x What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_name Date: March 2019 KernelVersion: 5.3 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) Moxtet module name. Format: string diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia index 795a5de12fc1..c4d46970c1cf 100644 --- a/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia +++ b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia @@ -1,7 +1,7 @@ What: /sys/class/leds/<led>/device/brightness Date: July 2020 KernelVersion: 5.9 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (RW) On the front panel of the Turris Omnia router there is also a button which can be used to control the intensity of all the LEDs at once, so that if they are too bright, user can dim them. diff --git a/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm b/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm index b8631f5a29c4..ea5e5b489bc7 100644 --- a/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm +++ b/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm @@ -1,21 +1,21 @@ What: /sys/firmware/turris-mox-rwtm/board_version Date: August 2019 KernelVersion: 5.4 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) Board version burned into eFuses of this Turris Mox board. Format: %i What: /sys/firmware/turris-mox-rwtm/mac_address* Date: August 2019 KernelVersion: 5.4 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) MAC addresses burned into eFuses of this Turris Mox board. Format: %pM What: /sys/firmware/turris-mox-rwtm/pubkey Date: August 2019 KernelVersion: 5.4 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) ECDSA public key (in pubkey hex compressed form) computed as pair to the ECDSA private key burned into eFuses of this Turris Mox Board. @@ -24,7 +24,7 @@ Description: (Read) ECDSA public key (in pubkey hex compressed form) computed What: /sys/firmware/turris-mox-rwtm/ram_size Date: August 2019 KernelVersion: 5.4 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) RAM size in MiB of this Turris Mox board as was detected during manufacturing and burned into eFuses. Can be 512 or 1024. Format: %i @@ -32,6 +32,6 @@ Description: (Read) RAM size in MiB of this Turris Mox board as was detected What: /sys/firmware/turris-mox-rwtm/serial_number Date: August 2019 KernelVersion: 5.4 -Contact: Marek Behún <marek.behun@nic.cz> +Contact: Marek Behún <kabel@kernel.org> Description: (Read) Serial number burned into eFuses of this Turris Mox device. Format: %016X diff --git a/Documentation/ABI/testing/sysfs-fs-xfs b/Documentation/ABI/testing/sysfs-fs-xfs index ea0cc8c42093..f704925f6fe9 100644 --- a/Documentation/ABI/testing/sysfs-fs-xfs +++ b/Documentation/ABI/testing/sysfs-fs-xfs @@ -33,7 +33,7 @@ Contact: xfs@oss.sgi.com Description: The current state of the log write grant head. It represents the total log reservation of all currently - oustanding transactions, including regrants due to + outstanding transactions, including regrants due to rolling transactions. The grant head is exported in "cycle:bytes" format. Users: xfstests diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 04545725f187..c8bad1762cba 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5462,6 +5462,18 @@ See Documentation/admin-guide/mm/transhuge.rst for more details. + trusted.source= [KEYS] + Format: <string> + This parameter identifies the trust source as a backend + for trusted keys implementation. Supported trust + sources: + - "tpm" + - "tee" + If not specified then it defaults to iterating through + the trust source list starting with TPM and assigns the + first trust source as a backend which is initialized + successfully during iteration. + tsc= Disable clocksource stability checks for TSC. Format: <string> [x86] reliable: mark tsc clocksource as reliable, this diff --git a/Documentation/arm64/acpi_object_usage.rst b/Documentation/arm64/acpi_object_usage.rst index 377e9d224db0..0609da73970b 100644 --- a/Documentation/arm64/acpi_object_usage.rst +++ b/Documentation/arm64/acpi_object_usage.rst @@ -17,12 +17,12 @@ For ACPI on arm64, tables also fall into the following categories: - Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT - - Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT, - MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT, STAO, - TCPA, TPM2, UEFI, XENV + - Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IBFT, + IORT, MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT, + STAO, TCPA, TPM2, UEFI, XENV - - Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT, - MSDM, OEMx, PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT + - Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IVRS, LPIT, MSDM, OEMx, + PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT ====== ======================================================================== Table Usage for ARMv8 Linux diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 719510247292..d410a47ffa57 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -130,6 +130,9 @@ stable kernels. | Marvell | ARM-MMU-500 | #582743 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| NVIDIA | Carmel Core | N/A | NVIDIA_CARMEL_CNP_ERRATUM | ++----------------+-----------------+-----------------+-----------------------------+ ++----------------+-----------------+-----------------+-----------------------------+ | Freescale/NXP | LS2080A/LS1043A | A-008585 | FSL_ERRATUM_A008585 | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml index 1d48ac712b23..a410d2cedde6 100644 --- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -14,6 +14,7 @@ properties: enum: - ti,j721e-sa2ul - ti,am654-sa2ul + - ti,am64-sa2ul reg: maxItems: 1 @@ -45,6 +46,18 @@ properties: description: Address translation for the possible RNG child node for SA2UL + clocks: + items: + - description: Clock used by PKA + - description: Main Input Clock + - description: Clock used by rng + + clock-names: + items: + - const: pka_in_clk + - const: x1_clk + - const: x2_clk + patternProperties: "^rng@[a-f0-9]+$": type: object @@ -57,7 +70,16 @@ required: - power-domains - dmas - dma-names - - dma-coherent + +if: + properties: + compatible: + enum: + - ti,j721e-sa2ul + - ti,am654-sa2ul +then: + required: + - dma-coherent additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index 37f18d684f6a..4c5c3712970e 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -32,7 +32,7 @@ Optional node properties: - "#thermal-sensor-cells" Used to expose itself to thermal fw. Read more about iio bindings at - Documentation/devicetree/bindings/iio/iio-bindings.txt + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/ Example: ncp15wb473@0 { diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml index ff99344788ab..fd040284561f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Bindings for GPIO bitbanged I2C maintainers: - - Wolfram Sang <wolfram@the-dreams.de> + - Wolfram Sang <wsa@kernel.org> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml index f23966b0d6c6..3592d49235e0 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX maintainers: - - Wolfram Sang <wolfram@the-dreams.de> + - Oleksij Rempel <o.rempel@pengutronix.de> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml index 9f414dbdae86..433a3fb55a2e 100644 --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml @@ -14,8 +14,9 @@ description: > Industrial I/O subsystem bindings for ADC controller found in Ingenic JZ47xx SoCs. - ADC clients must use the format described in iio-bindings.txt, giving - a phandle and IIO specifier pair ("io-channels") to the ADC controller. + ADC clients must use the format described in + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml, + giving a phandle and IIO specifier pair ("io-channels") to the ADC controller. properties: compatible: diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml index 054406bbd22b..721878d5b7af 100644 --- a/Documentation/devicetree/bindings/input/adc-joystick.yaml +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml @@ -24,7 +24,9 @@ properties: description: > List of phandle and IIO specifier pairs. Each pair defines one ADC channel to which a joystick axis is connected. - See Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + See + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml + for details. '#address-cells': const: 1 diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt index 51456c0e9a27..af5223bb5bdd 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt @@ -5,7 +5,10 @@ Required properties: - compatible: must be "resistive-adc-touch" The device must be connected to an ADC device that provides channels for position measurement and optional pressure. -Refer to ../iio/iio-bindings.txt for details +Refer to +https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml +for details + - iio-channels: must have at least two channels connected to an ADC device. These should correspond to the channels exposed by the ADC device and should have the right index as the ADC device registers them. These channels diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml index 0a046be8d1cd..0358a7739c8e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -23,6 +23,7 @@ properties: - enum: - ingenic,jz4775-intc - ingenic,jz4770-intc + - ingenic,jz4760b-intc - const: ingenic,jz4760-intc - items: - const: ingenic,x1000-intc diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index fe7fa25877fd..c7ed2871da06 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: CZ.NIC's Turris Omnia LEDs driver maintainers: - - Marek Behún <marek.behun@nic.cz> + - Marek Behún <kabel@kernel.org> description: This module adds support for the RGB LEDs found on the front panel of the diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index d2a6e835c257..937b3e5505e0 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -72,7 +72,9 @@ Required child device properties: pwm|regulator|rtc|sysctrl|usb]"; A few child devices require ADC channels from the GPADC node. Those follow the - standard bindings from iio/iio-bindings.txt and iio/adc/adc.txt + standard bindings from + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml + and Documentation/devicetree/bindings/iio/adc/adc.yaml abx500-temp : io-channels "aux1" and "aux2" for measuring external temperatures. diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt index 5ddcc8f4febc..b52e7a33f0f9 100644 --- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -16,14 +16,14 @@ Optional subnodes: The sub-functions of CPCAP get their own node with their own compatible values, which are described in the following files: -- ../power/supply/cpcap-battery.txt -- ../power/supply/cpcap-charger.txt -- ../regulator/cpcap-regulator.txt -- ../phy/phy-cpcap-usb.txt -- ../input/cpcap-pwrbutton.txt -- ../rtc/cpcap-rtc.txt -- ../leds/leds-cpcap.txt -- ../iio/adc/cpcap-adc.txt +- Documentation/devicetree/bindings/power/supply/cpcap-battery.txt +- Documentation/devicetree/bindings/power/supply/cpcap-charger.txt +- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt +- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt +- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt +- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt +- Documentation/devicetree/bindings/leds/leds-cpcap.txt +- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml The only exception is the audio codec. Instead of a compatible value its node must be named "audio-codec". diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml index 79c38ea14237..13c26f23a820 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml @@ -32,7 +32,7 @@ required: - interrupts - interrupt-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 4b7d1e5d003c..e8f04687a3e0 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -49,7 +49,7 @@ properties: description: Reference to an nvmem node for the MAC address - nvmem-cells-names: + nvmem-cell-names: const: mac-address phy-connection-type: diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index b921731cd970..df9e844dd6bc 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -65,6 +65,71 @@ KSZ9031: step is 60ps. The default value is the neutral setting, so setting rxc-skew-ps=<0> actually results in -900 picoseconds adjustment. + The KSZ9031 hardware supports a range of skew values from negative to + positive, where the specific range is property dependent. All values + specified in the devicetree are offset by the minimum value so they + can be represented as positive integers in the devicetree since it's + difficult to represent a negative number in the devictree. + + The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps. + + Pad Skew Value Delay (ps) Devicetree Value + ------------------------------------------------------ + 0_0000 -900ps 0 + 0_0001 -840ps 60 + 0_0010 -780ps 120 + 0_0011 -720ps 180 + 0_0100 -660ps 240 + 0_0101 -600ps 300 + 0_0110 -540ps 360 + 0_0111 -480ps 420 + 0_1000 -420ps 480 + 0_1001 -360ps 540 + 0_1010 -300ps 600 + 0_1011 -240ps 660 + 0_1100 -180ps 720 + 0_1101 -120ps 780 + 0_1110 -60ps 840 + 0_1111 0ps 900 + 1_0000 60ps 960 + 1_0001 120ps 1020 + 1_0010 180ps 1080 + 1_0011 240ps 1140 + 1_0100 300ps 1200 + 1_0101 360ps 1260 + 1_0110 420ps 1320 + 1_0111 480ps 1380 + 1_1000 540ps 1440 + 1_1001 600ps 1500 + 1_1010 660ps 1560 + 1_1011 720ps 1620 + 1_1100 780ps 1680 + 1_1101 840ps 1740 + 1_1110 900ps 1800 + 1_1111 960ps 1860 + + The following 4-bit values table apply to the txdX-skew-ps, rxdX-skew-ps + data pads, and the rxdv-skew-ps, txen-skew-ps control pads. + + Pad Skew Value Delay (ps) Devicetree Value + ------------------------------------------------------ + 0000 -420ps 0 + 0001 -360ps 60 + 0010 -300ps 120 + 0011 -240ps 180 + 0100 -180ps 240 + 0101 -120ps 300 + 0110 -60ps 360 + 0111 0ps 420 + 1000 60ps 480 + 1001 120ps 540 + 1010 180ps 600 + 1011 240ps 660 + 1100 300ps 720 + 1101 360ps 780 + 1110 420ps 840 + 1111 480ps 900 + Optional properties: Maximum value of 1860, default value 900: @@ -120,11 +185,21 @@ KSZ9131: Examples: + /* Attach to an Ethernet device with autodetected PHY */ + &enet { + rxc-skew-ps = <1800>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1800>; + txen-skew-ps = <0>; + status = "okay"; + }; + + /* Attach to an explicitly-specified PHY */ mdio { phy0: ethernet-phy@0 { - rxc-skew-ps = <3000>; + rxc-skew-ps = <1800>; rxdv-skew-ps = <0>; - txc-skew-ps = <3000>; + txc-skew-ps = <1800>; txen-skew-ps = <0>; reg = <0>; }; @@ -133,3 +208,20 @@ Examples: phy = <&phy0>; phy-mode = "rgmii-id"; }; + +References + + Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014. + http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf + + Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014. + http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf + +Notes: + + Note that a previous version of the Micrel ksz9021rl/rn Data Sheet + was missing extended register 106 (transmit data pad skews), and + incorrectly specified the ps per step as 200ps/step instead of + 120ps/step. The latest update to this document reflects the latest + revision of the Micrel specification even though usage in the kernel + still reflects that incorrect document. diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml index c147900f9041..6da674666d45 100644 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml @@ -28,6 +28,12 @@ properties: clock-names: const: ipsec + resets: + maxItems: 1 + + reset-names: + const: ipsec + interrupts: maxItems: 1 @@ -35,6 +41,18 @@ required: - compatible - reg +if: + properties: + compatible: + enum: + - brcm,bcm6368-rng +then: + required: + - clocks + - clock-names + - resets + - reset-names + additionalProperties: false examples: @@ -58,4 +76,7 @@ examples: clocks = <&periph_clk 18>; clock-names = "ipsec"; + + resets = <&periph_rst 4>; + reset-names = "ipsec"; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index 50449b6d1048..4454aca34d56 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -21,6 +21,10 @@ properties: - fsl,vf610-spdif - fsl,imx6sx-spdif - fsl,imx8qm-spdif + - fsl,imx8qxp-spdif + - fsl,imx8mq-spdif + - fsl,imx8mm-spdif + - fsl,imx8mn-spdif reg: maxItems: 1 diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 40ccac61137e..22ce801e3a8d 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -613,6 +613,27 @@ Some of these date from the very introduction of KMS in 2008 ... Level: Intermediate +Remove automatic page mapping from dma-buf importing +---------------------------------------------------- + +When importing dma-bufs, the dma-buf and PRIME frameworks automatically map +imported pages into the importer's DMA area. drm_gem_prime_fd_to_handle() and +drm_gem_prime_handle_to_fd() require that importers call dma_buf_attach() +even if they never do actual device DMA, but only CPU access through +dma_buf_vmap(). This is a problem for USB devices, which do not support DMA +operations. + +To fix the issue, automatic page mappings should be removed from the +buffer-sharing code. Fixing this is a bit more involved, since the import/export +cache is also tied to &drm_gem_object.import_attach. Meanwhile we paper over +this problem for USB devices by fishing out the USB host controller device, as +long as that supports DMA. Otherwise importing can still needlessly fail. + +Contact: Thomas Zimmermann <tzimmermann@suse.de>, Daniel Vetter + +Level: Advanced + + Better Testing ============== diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst index 5f690f0ad0e4..62f2aab8eaec 100644 --- a/Documentation/networking/bonding.rst +++ b/Documentation/networking/bonding.rst @@ -1988,7 +1988,7 @@ netif_carrier. If use_carrier is 0, then the MII monitor will first query the device's (via ioctl) MII registers and check the link state. If that request fails (not just that it returns carrier down), then the MII -monitor will make an ethtool ETHOOL_GLINK request to attempt to obtain +monitor will make an ethtool ETHTOOL_GLINK request to attempt to obtain the same information. If both methods fail (i.e., the driver either does not support or had some error in processing both the MII register and ethtool requests), then the MII monitor will assume the link is diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst index 3561a8a29fd2..f8c6469f2bd2 100644 --- a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst +++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst @@ -267,7 +267,7 @@ DATA PATH Tx -- -end_start_xmit() is called by the stack. This function does the following: +ena_start_xmit() is called by the stack. This function does the following: - Maps data buffers (skb->data and frags). - Populates ena_buf for the push buffer (if the driver and device are diff --git a/Documentation/networking/devlink/devlink-dpipe.rst b/Documentation/networking/devlink/devlink-dpipe.rst index 468fe1001b74..af37f250df43 100644 --- a/Documentation/networking/devlink/devlink-dpipe.rst +++ b/Documentation/networking/devlink/devlink-dpipe.rst @@ -52,7 +52,7 @@ purposes as a standard complementary tool. The system's view from ``devlink-dpipe`` should change according to the changes done by the standard configuration tools. -For example, it’s quiet common to implement Access Control Lists (ACL) +For example, it’s quite common to implement Access Control Lists (ACL) using Ternary Content Addressable Memory (TCAM). The TCAM memory can be divided into TCAM regions. Complex TC filters can have multiple rules with different priorities and different lookup keys. On the other hand hardware diff --git a/Documentation/networking/devlink/devlink-port.rst b/Documentation/networking/devlink/devlink-port.rst index e99b41599465..ab790e7980b8 100644 --- a/Documentation/networking/devlink/devlink-port.rst +++ b/Documentation/networking/devlink/devlink-port.rst @@ -151,7 +151,7 @@ representor netdevice. ------------- A subfunction devlink port is created but it is not active yet. That means the entities are created on devlink side, the e-switch port representor is created, -but the subfunction device itself it not created. A user might use e-switch port +but the subfunction device itself is not created. A user might use e-switch port representor to do settings, putting it into bridge, adding TC rules, etc. A user might as well configure the hardware address (such as MAC address) of the subfunction while subfunction is inactive. @@ -173,7 +173,7 @@ Terms and Definitions * - Term - Definitions * - ``PCI device`` - - A physical PCI device having one or more PCI bus consists of one or + - A physical PCI device having one or more PCI buses consists of one or more PCI controllers. * - ``PCI controller`` - A controller consists of potentially multiple physical functions, diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 05073482db05..dc03ff884541 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -976,9 +976,9 @@ constraints on coalescing parameters and their values. PAUSE_GET -============ +========= -Gets channel counts like ``ETHTOOL_GPAUSE`` ioctl request. +Gets pause frame settings like ``ETHTOOL_GPAUSEPARAM`` ioctl request. Request contents: @@ -1007,7 +1007,7 @@ the statistics in the following structure: Each member has a corresponding attribute defined. PAUSE_SET -============ +========= Sets pause parameters like ``ETHTOOL_GPAUSEPARAM`` ioctl request. @@ -1024,7 +1024,7 @@ Request contents: EEE_GET ======= -Gets channel counts like ``ETHTOOL_GEEE`` ioctl request. +Gets Energy Efficient Ethernet settings like ``ETHTOOL_GEEE`` ioctl request. Request contents: @@ -1054,7 +1054,7 @@ first 32 are provided by the ``ethtool_ops`` callback. EEE_SET ======= -Sets pause parameters like ``ETHTOOL_GEEEPARAM`` ioctl request. +Sets Energy Efficient Ethernet parameters like ``ETHTOOL_SEEE`` ioctl request. Request contents: diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index c7952ac5bd2f..3feb5e565b1a 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -1849,21 +1849,6 @@ ip6frag_low_thresh - INTEGER ip6frag_time - INTEGER Time in seconds to keep an IPv6 fragment in memory. -IPv6 Segment Routing: - -seg6_flowlabel - INTEGER - Controls the behaviour of computing the flowlabel of outer - IPv6 header in case of SR T.encaps - - == ======================================================= - -1 set flowlabel to zero. - 0 copy flowlabel from Inner packet in case of Inner IPv6 - (Set flowlabel to 0 in case IPv4/L2) - 1 Compute the flowlabel using seg6_make_flowlabel() - == ======================================================= - - Default is 0. - ``conf/default/*``: Change the interface-specific default settings. diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst index a64c01b52b4c..91b2cf712801 100644 --- a/Documentation/networking/netdev-FAQ.rst +++ b/Documentation/networking/netdev-FAQ.rst @@ -142,73 +142,13 @@ Please send incremental versions on top of what has been merged in order to fix the patches the way they would look like if your latest patch series was to be merged. -How can I tell what patches are queued up for backporting to the various stable releases? ------------------------------------------------------------------------------------------ -Normally Greg Kroah-Hartman collects stable commits himself, but for -networking, Dave collects up patches he deems critical for the -networking subsystem, and then hands them off to Greg. - -There is a patchworks queue that you can see here: - - https://patchwork.kernel.org/bundle/netdev/stable/?state=* - -It contains the patches which Dave has selected, but not yet handed off -to Greg. If Greg already has the patch, then it will be here: - - https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git - -A quick way to find whether the patch is in this stable-queue is to -simply clone the repo, and then git grep the mainline commit ID, e.g. -:: - - stable-queue$ git grep -l 284041ef21fdf2e - releases/3.0.84/ipv6-fix-possible-crashes-in-ip6_cork_release.patch - releases/3.4.51/ipv6-fix-possible-crashes-in-ip6_cork_release.patch - releases/3.9.8/ipv6-fix-possible-crashes-in-ip6_cork_release.patch - stable/stable-queue$ - -I see a network patch and I think it should be backported to stable. Should I request it via stable@vger.kernel.org like the references in the kernel's Documentation/process/stable-kernel-rules.rst file say? ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -No, not for networking. Check the stable queues as per above first -to see if it is already queued. If not, then send a mail to netdev, -listing the upstream commit ID and why you think it should be a stable -candidate. - -Before you jump to go do the above, do note that the normal stable rules -in :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` -still apply. So you need to explicitly indicate why it is a critical -fix and exactly what users are impacted. In addition, you need to -convince yourself that you *really* think it has been overlooked, -vs. having been considered and rejected. - -Generally speaking, the longer it has had a chance to "soak" in -mainline, the better the odds that it is an OK candidate for stable. So -scrambling to request a commit be added the day after it appears should -be avoided. - -I have created a network patch and I think it should be backported to stable. Should I add a Cc: stable@vger.kernel.org like the references in the kernel's Documentation/ directory say? ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ -No. See above answer. In short, if you think it really belongs in -stable, then ensure you write a decent commit log that describes who -gets impacted by the bug fix and how it manifests itself, and when the -bug was introduced. If you do that properly, then the commit will get -handled appropriately and most likely get put in the patchworks stable -queue if it really warrants it. - -If you think there is some valid information relating to it being in -stable that does *not* belong in the commit log, then use the three dash -marker line as described in -:ref:`Documentation/process/submitting-patches.rst <the_canonical_patch_format>` -to temporarily embed that information into the patch that you send. - -Are all networking bug fixes backported to all stable releases? +Are there special rules regarding stable submissions on netdev? --------------------------------------------------------------- -Due to capacity, Dave could only take care of the backports for the -last two stable releases. For earlier stable releases, each stable -branch maintainer is supposed to take care of them. If you find any -patch is missing from an earlier stable branch, please notify -stable@vger.kernel.org with either a commit ID or a formal patch -backported, and CC Dave and other relevant networking developers. +While it used to be the case that netdev submissions were not supposed +to carry explicit ``CC: stable@vger.kernel.org`` tags that is no longer +the case today. Please follow the standard stable rules in +:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`, +and make sure you include appropriate Fixes tags! Is the comment style convention different for the networking content? --------------------------------------------------------------------- diff --git a/Documentation/networking/seg6-sysctl.rst b/Documentation/networking/seg6-sysctl.rst index ec73e1445030..07c20e470baf 100644 --- a/Documentation/networking/seg6-sysctl.rst +++ b/Documentation/networking/seg6-sysctl.rst @@ -24,3 +24,16 @@ seg6_require_hmac - INTEGER * 1 - Drop SR packets without HMAC, validate SR packets with HMAC Default is 0. + +seg6_flowlabel - INTEGER + Controls the behaviour of computing the flowlabel of outer + IPv6 header in case of SR T.encaps + + == ======================================================= + -1 set flowlabel to zero. + 0 copy flowlabel from Inner packet in case of Inner IPv6 + (Set flowlabel to 0 in case IPv4/L2) + 1 Compute the flowlabel using seg6_make_flowlabel() + == ======================================================= + + Default is 0. diff --git a/Documentation/networking/xfrm_device.rst b/Documentation/networking/xfrm_device.rst index da1073acda96..01391dfd37d9 100644 --- a/Documentation/networking/xfrm_device.rst +++ b/Documentation/networking/xfrm_device.rst @@ -50,7 +50,7 @@ Callbacks to implement The NIC driver offering ipsec offload will need to implement these callbacks to make the offload available to the network stack's -XFRM subsytem. Additionally, the feature bits NETIF_F_HW_ESP and +XFRM subsystem. Additionally, the feature bits NETIF_F_HW_ESP and NETIF_F_HW_ESP_TX_CSUM will signal the availability of the offload. diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst index 3973556250e1..003c865e9c21 100644 --- a/Documentation/process/stable-kernel-rules.rst +++ b/Documentation/process/stable-kernel-rules.rst @@ -35,12 +35,6 @@ Rules on what kind of patches are accepted, and which ones are not, into the Procedure for submitting patches to the -stable tree ---------------------------------------------------- - - If the patch covers files in net/ or drivers/net please follow netdev stable - submission guidelines as described in - :ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>` - after first checking the stable networking queue at - https://patchwork.kernel.org/bundle/netdev/stable/?state=* - to ensure the requested patch is not already queued up. - Security patches should not be handled (solely) by the -stable review process but should follow the procedures in :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`. diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index 8c991c863628..91de63b201c1 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -250,11 +250,6 @@ should also read :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` in addition to this file. -Note, however, that some subsystem maintainers want to come to their own -conclusions on which patches should go to the stable trees. The networking -maintainer, in particular, would rather not see individual developers -adding lines like the above to their patches. - If changes affect userland-kernel interfaces, please send the MAN-PAGES maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at least a notification of the change, so that some information makes its way diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst index 1da879a68640..80d5a5af62a1 100644 --- a/Documentation/security/keys/trusted-encrypted.rst +++ b/Documentation/security/keys/trusted-encrypted.rst @@ -6,30 +6,127 @@ Trusted and Encrypted Keys are two new key types added to the existing kernel key ring service. Both of these new types are variable length symmetric keys, and in both cases all keys are created in the kernel, and user space sees, stores, and loads only encrypted blobs. Trusted Keys require the availability -of a Trusted Platform Module (TPM) chip for greater security, while Encrypted -Keys can be used on any system. All user level blobs, are displayed and loaded -in hex ascii for convenience, and are integrity verified. +of a Trust Source for greater security, while Encrypted Keys can be used on any +system. All user level blobs, are displayed and loaded in hex ASCII for +convenience, and are integrity verified. -Trusted Keys use a TPM both to generate and to seal the keys. Keys are sealed -under a 2048 bit RSA key in the TPM, and optionally sealed to specified PCR -(integrity measurement) values, and only unsealed by the TPM, if PCRs and blob -integrity verifications match. A loaded Trusted Key can be updated with new -(future) PCR values, so keys are easily migrated to new pcr values, such as -when the kernel and initramfs are updated. The same key can have many saved -blobs under different PCR values, so multiple boots are easily supported. -TPM 1.2 -------- +Trust Source +============ -By default, trusted keys are sealed under the SRK, which has the default -authorization value (20 zeros). This can be set at takeownership time with the -trouser's utility: "tpm_takeownership -u -z". +A trust source provides the source of security for Trusted Keys. This +section lists currently supported trust sources, along with their security +considerations. Whether or not a trust source is sufficiently safe depends +on the strength and correctness of its implementation, as well as the threat +environment for a specific use case. Since the kernel doesn't know what the +environment is, and there is no metric of trust, it is dependent on the +consumer of the Trusted Keys to determine if the trust source is sufficiently +safe. -TPM 2.0 -------- + * Root of trust for storage -The user must first create a storage key and make it persistent, so the key is -available after reboot. This can be done using the following commands. + (1) TPM (Trusted Platform Module: hardware device) + + Rooted to Storage Root Key (SRK) which never leaves the TPM that + provides crypto operation to establish root of trust for storage. + + (2) TEE (Trusted Execution Environment: OP-TEE based on Arm TrustZone) + + Rooted to Hardware Unique Key (HUK) which is generally burnt in on-chip + fuses and is accessible to TEE only. + + * Execution isolation + + (1) TPM + + Fixed set of operations running in isolated execution environment. + + (2) TEE + + Customizable set of operations running in isolated execution + environment verified via Secure/Trusted boot process. + + * Optional binding to platform integrity state + + (1) TPM + + Keys can be optionally sealed to specified PCR (integrity measurement) + values, and only unsealed by the TPM, if PCRs and blob integrity + verifications match. A loaded Trusted Key can be updated with new + (future) PCR values, so keys are easily migrated to new PCR values, + such as when the kernel and initramfs are updated. The same key can + have many saved blobs under different PCR values, so multiple boots are + easily supported. + + (2) TEE + + Relies on Secure/Trusted boot process for platform integrity. It can + be extended with TEE based measured boot process. + + * Interfaces and APIs + + (1) TPM + + TPMs have well-documented, standardized interfaces and APIs. + + (2) TEE + + TEEs have well-documented, standardized client interface and APIs. For + more details refer to ``Documentation/staging/tee.rst``. + + + * Threat model + + The strength and appropriateness of a particular TPM or TEE for a given + purpose must be assessed when using them to protect security-relevant data. + + +Key Generation +============== + +Trusted Keys +------------ + +New keys are created from random numbers generated in the trust source. They +are encrypted/decrypted using a child key in the storage key hierarchy. +Encryption and decryption of the child key must be protected by a strong +access control policy within the trust source. + + * TPM (hardware device) based RNG + + Strength of random numbers may vary from one device manufacturer to + another. + + * TEE (OP-TEE based on Arm TrustZone) based RNG + + RNG is customizable as per platform needs. It can either be direct output + from platform specific hardware RNG or a software based Fortuna CSPRNG + which can be seeded via multiple entropy sources. + +Encrypted Keys +-------------- + +Encrypted keys do not depend on a trust source, and are faster, as they use AES +for encryption/decryption. New keys are created from kernel-generated random +numbers, and are encrypted/decrypted using a specified ‘master’ key. The +‘master’ key can either be a trusted-key or user-key type. The main disadvantage +of encrypted keys is that if they are not rooted in a trusted key, they are only +as secure as the user key encrypting them. The master user key should therefore +be loaded in as secure a way as possible, preferably early in boot. + + +Usage +===== + +Trusted Keys usage: TPM +----------------------- + +TPM 1.2: By default, trusted keys are sealed under the SRK, which has the +default authorization value (20 bytes of 0s). This can be set at takeownership +time with the TrouSerS utility: "tpm_takeownership -u -z". + +TPM 2.0: The user must first create a storage key and make it persistent, so the +key is available after reboot. This can be done using the following commands. With the IBM TSS 2 stack:: @@ -78,14 +175,21 @@ TPM_STORED_DATA format. The key length for new keys are always in bytes. Trusted Keys can be 32 - 128 bytes (256 - 1024 bits), the upper limit is to fit within the 2048 bit SRK (RSA) keylength, with all necessary structure/padding. -Encrypted keys do not depend on a TPM, and are faster, as they use AES for -encryption/decryption. New keys are created from kernel generated random -numbers, and are encrypted/decrypted using a specified 'master' key. The -'master' key can either be a trusted-key or user-key type. The main -disadvantage of encrypted keys is that if they are not rooted in a trusted key, -they are only as secure as the user key encrypting them. The master user key -should therefore be loaded in as secure a way as possible, preferably early in -boot. +Trusted Keys usage: TEE +----------------------- + +Usage:: + + keyctl add trusted name "new keylen" ring + keyctl add trusted name "load hex_blob" ring + keyctl print keyid + +"keyctl print" returns an ASCII hex copy of the sealed key, which is in format +specific to TEE device implementation. The key length for new keys is always +in bytes. Trusted Keys can be 32 - 128 bytes (256 - 1024 bits). + +Encrypted Keys usage +-------------------- The decrypted portion of encrypted keys can contain either a simple symmetric key or a more complex structure. The format of the more complex structure is @@ -103,8 +207,8 @@ Where:: format:= 'default | ecryptfs | enc32' key-type:= 'trusted' | 'user' - -Examples of trusted and encrypted key usage: +Examples of trusted and encrypted key usage +------------------------------------------- Create and save a trusted key named "kmk" of length 32 bytes. @@ -150,7 +254,7 @@ Load a trusted key from the saved blob:: f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b e4a8aea2b607ec96931e6f4d4fe563ba -Reseal a trusted key under new pcr values:: +Reseal (TPM specific) a trusted key under new PCR values:: $ keyctl update 268728824 "update pcrinfo=`cat pcr.blob`" $ keyctl print 268728824 @@ -164,11 +268,12 @@ Reseal a trusted key under new pcr values:: 7ef6a24defe4846104209bf0c3eced7fa1a672ed5b125fc9d8cd88b476a658a4434644ef df8ae9a178e9f83ba9f08d10fa47e4226b98b0702f06b3b8 + The initial consumer of trusted keys is EVM, which at boot time needs a high -quality symmetric key for HMAC protection of file metadata. The use of a +quality symmetric key for HMAC protection of file metadata. The use of a trusted key provides strong guarantees that the EVM key has not been -compromised by a user level problem, and when sealed to specific boot PCR -values, protects against boot and offline attacks. Create and save an +compromised by a user level problem, and when sealed to a platform integrity +state, protects against boot and offline attacks. Create and save an encrypted key "evm" using the above trusted key "kmk": option 1: omitting 'format':: @@ -207,3 +312,61 @@ about the usage can be found in the file Another new format 'enc32' has been defined in order to support encrypted keys with payload size of 32 bytes. This will initially be used for nvdimm security but may expand to other usages that require 32 bytes payload. + + +TPM 2.0 ASN.1 Key Format +------------------------ + +The TPM 2.0 ASN.1 key format is designed to be easily recognisable, +even in binary form (fixing a problem we had with the TPM 1.2 ASN.1 +format) and to be extensible for additions like importable keys and +policy:: + + TPMKey ::= SEQUENCE { + type OBJECT IDENTIFIER + emptyAuth [0] EXPLICIT BOOLEAN OPTIONAL + parent INTEGER + pubkey OCTET STRING + privkey OCTET STRING + } + +type is what distinguishes the key even in binary form since the OID +is provided by the TCG to be unique and thus forms a recognizable +binary pattern at offset 3 in the key. The OIDs currently made +available are:: + + 2.23.133.10.1.3 TPM Loadable key. This is an asymmetric key (Usually + RSA2048 or Elliptic Curve) which can be imported by a + TPM2_Load() operation. + + 2.23.133.10.1.4 TPM Importable Key. This is an asymmetric key (Usually + RSA2048 or Elliptic Curve) which can be imported by a + TPM2_Import() operation. + + 2.23.133.10.1.5 TPM Sealed Data. This is a set of data (up to 128 + bytes) which is sealed by the TPM. It usually + represents a symmetric key and must be unsealed before + use. + +The trusted key code only uses the TPM Sealed Data OID. + +emptyAuth is true if the key has well known authorization "". If it +is false or not present, the key requires an explicit authorization +phrase. This is used by most user space consumers to decide whether +to prompt for a password. + +parent represents the parent key handle, either in the 0x81 MSO space, +like 0x81000001 for the RSA primary storage key. Userspace programmes +also support specifying the primary handle in the 0x40 MSO space. If +this happens the Elliptic Curve variant of the primary key using the +TCG defined template will be generated on the fly into a volatile +object and used as the parent. The current kernel code only supports +the 0x81 MSO form. + +pubkey is the binary representation of TPM2B_PRIVATE excluding the +initial TPM2B header, which can be reconstructed from the ASN.1 octet +string length. + +privkey is the binary representation of TPM2B_PUBLIC excluding the +initial TPM2B header which can be reconstructed from the ASN.1 octed +string length. diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 1a2b5210cdbf..307f2fcf1b02 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -182,6 +182,9 @@ is dependent on the CPU capability and the kernel configuration. The limit can be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION ioctl() at run-time. +Creation of the VM will fail if the requested IPA size (whether it is +implicit or explicit) is unsupported on the host. + Please note that configuring the IPA size does not affect the capability exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects size of the address translated by the stage2 level (guest physical to @@ -1492,7 +1495,8 @@ Fails if any VCPU has already been created. Define which vcpu is the Bootstrap Processor (BSP). Values are the same as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default -is vcpu 0. +is vcpu 0. This ioctl has to be called before vcpu creation, +otherwise it will return EBUSY error. 4.42 KVM_GET_XSAVE @@ -4803,8 +4807,10 @@ If an MSR access is not permitted through the filtering, it generates a allows user space to deflect and potentially handle various MSR accesses into user space. -If a vCPU is in running state while this ioctl is invoked, the vCPU may -experience inconsistent filtering behavior on MSR accesses. +Note, invoking this ioctl with a vCPU is running is inherently racy. However, +KVM does guarantee that vCPUs will see either the previous filter or the new +filter, e.g. MSRs with identical settings in both the old and new filter will +have deterministic behavior. 4.127 KVM_XEN_HVM_SET_ATTR -------------------------- diff --git a/Documentation/x86/sgx.rst b/Documentation/x86/sgx.rst index eaee1368b4fd..dd0ac96ff9ef 100644 --- a/Documentation/x86/sgx.rst +++ b/Documentation/x86/sgx.rst @@ -209,3 +209,44 @@ An application may be loaded into a container enclave which is specially configured with a library OS and run-time which permits the application to run. The enclave run-time and library OS work together to execute the application when a thread enters the enclave. + +Impact of Potential Kernel SGX Bugs +=================================== + +EPC leaks +--------- + +When EPC page leaks happen, a WARNING like this is shown in dmesg: + +"EREMOVE returned ... and an EPC page was leaked. SGX may become unusable..." + +This is effectively a kernel use-after-free of an EPC page, and due +to the way SGX works, the bug is detected at freeing. Rather than +adding the page back to the pool of available EPC pages, the kernel +intentionally leaks the page to avoid additional errors in the future. + +When this happens, the kernel will likely soon leak more EPC pages, and +SGX will likely become unusable because the memory available to SGX is +limited. However, while this may be fatal to SGX, the rest of the kernel +is unlikely to be impacted and should continue to work. + +As a result, when this happpens, user should stop running any new +SGX workloads, (or just any new workloads), and migrate all valuable +workloads. Although a machine reboot can recover all EPC memory, the bug +should be reported to Linux developers. + + +Virtual EPC +=========== + +The implementation has also a virtual EPC driver to support SGX enclaves +in guests. Unlike the SGX driver, an EPC page allocated by the virtual +EPC driver doesn't have a specific enclave associated with it. This is +because KVM doesn't track how a guest uses EPC pages. + +As a result, the SGX core page reclaimer doesn't support reclaiming EPC +pages allocated to KVM guests through the virtual EPC driver. If the +user wants to deploy SGX applications both on the host and in guests +on the same machine, the user should reserve enough EPC (by taking out +total virtual EPC size of all SGX VMs from the physical EPC size) for +host SGX applications so they can run with acceptable performance. |