summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-proximity-as39354
-rw-r--r--Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt48
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt8
-rw-r--r--Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt27
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/mlx90632.txt28
-rw-r--r--Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt16
-rw-r--r--Documentation/networking/dpaa2/index.rst8
-rw-r--r--Documentation/networking/dpaa2/overview.rst404
-rw-r--r--Documentation/networking/index.rst1
-rw-r--r--Documentation/networking/irda.txt10
11 files changed, 541 insertions, 15 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x b/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x
index c0c1ea924535..d512f865600e 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x
+++ b/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x
@@ -1,7 +1,7 @@
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_VOC_short_raw
Date: September 2015
KernelVersion: 4.3
-Contact: Matt Ranostay <mranostay@gmail.com>
+Contact: Matt Ranostay <matt.ranostay@konsulko.com>
Description:
Get the raw calibration VOC value from the sensor.
This value has little application outside of calibration.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index 147d4e8a1403..9a17ab5036a4 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -1,7 +1,7 @@
What /sys/bus/iio/devices/iio:deviceX/in_proximity_input
Date: March 2014
KernelVersion: 3.15
-Contact: Matt Ranostay <mranostay@gmail.com>
+Contact: Matt Ranostay <matt.ranostay@konsulko.com>
Description:
Get the current distance in meters of storm (1km steps)
1000-40000 = distance in meters
@@ -9,7 +9,7 @@ Description:
What /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
Date: March 2014
KernelVersion: 3.15
-Contact: Matt Ranostay <mranostay@gmail.com>
+Contact: Matt Ranostay <matt.ranostay@konsulko.com>
Description:
Show or set the gain boost of the amp, from 0-31 range.
18 = indoors (default)
diff --git a/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt
new file mode 100644
index 000000000000..7a6313913923
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt
@@ -0,0 +1,48 @@
+* X-Powers AXP ADC bindings
+
+Required properties:
+ - compatible: should be one of:
+ - "x-powers,axp209-adc",
+ - "x-powers,axp221-adc",
+ - "x-powers,axp813-adc",
+ - #io-channel-cells: should be 1,
+
+Example:
+
+&axp22x {
+ adc {
+ compatible = "x-powers,axp221-adc";
+ #io-channel-cells = <1>;
+ };
+};
+
+ADC channels and their indexes per variant:
+
+AXP209
+------
+ 0 | acin_v
+ 1 | acin_i
+ 2 | vbus_v
+ 3 | vbus_i
+ 4 | pmic_temp
+ 5 | gpio0_v
+ 6 | gpio1_v
+ 7 | ipsout_v
+ 8 | batt_v
+ 9 | batt_chrg_i
+10 | batt_dischrg_i
+
+AXP22x
+------
+ 0 | pmic_temp
+ 1 | batt_v
+ 2 | batt_chrg_i
+ 3 | batt_dischrg_i
+
+AXP813
+------
+ 0 | pmic_temp
+ 1 | gpio0_v
+ 2 | batt_v
+ 3 | batt_chrg_i
+ 4 | batt_dischrg_i
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
index 911492da48f3..ed7520d1d051 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
@@ -32,6 +32,10 @@ Optional properties:
to "clock" property. Frequency must be a multiple of the rcc
clock frequency. If not, SPI CLKOUT frequency will not be
accurate.
+- pinctrl-names: Set to "default".
+- pinctrl-0: List of phandles pointing to pin configuration
+ nodes to set pins in mode of operation for dfsdm
+ on external pin.
Contents of a STM32 DFSDM child nodes:
--------------------------------------
@@ -68,8 +72,8 @@ Optional properties:
- st,adc-channel-types: Single-ended channel input type.
- "SPI_R": SPI with data on rising edge (default)
- "SPI_F": SPI with data on falling edge
- - "MANCH_R": manchester codec, rising edge = logic 0
- - "MANCH_F": manchester codec, falling edge = logic 1
+ - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
+ - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
- st,adc-channel-clk-src: Conversion clock source.
- "CLKIN": external SPI clock (CLKIN x)
- "CLKOUT": internal SPI clock (CLKOUT) (default)
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
new file mode 100644
index 000000000000..f9b2eef946aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
@@ -0,0 +1,27 @@
+* Analog Devices AD5272 digital potentiometer
+
+The node for this device must be a child node of a I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+ Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+ - compatible: Must be one of the following, depending on the model:
+ adi,ad5272-020
+ adi,ad5272-050
+ adi,ad5272-100
+ adi,ad5274-020
+ adi,ad5274-100
+
+Optional properties:
+ - reset-gpios: GPIO specification for the RESET input. This is an
+ active low signal to the AD5272.
+
+Example:
+ad5272: potentiometer@2f {
+ reg = <0x2F>;
+ compatible = "adi,ad5272-020";
+ reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt
new file mode 100644
index 000000000000..0b05812001f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt
@@ -0,0 +1,28 @@
+* Melexis MLX90632 contactless Infra Red temperature sensor
+
+Link to datasheet: https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632
+
+There are various applications for the Infra Red contactless temperature sensor
+and MLX90632 is most suitable for consumer applications where measured object
+temperature is in range between -20 to 200 degrees Celsius with relative error
+of measurement below 1 degree Celsius in object temperature range for
+industrial applications. Since it can operate and measure ambient temperature
+in range of -20 to 85 degrees Celsius it is suitable also for outdoor use.
+
+Be aware that electronics surrounding the sensor can increase ambient
+temperature. MLX90632 can be calibrated to reduce the housing effect via
+already existing EEPROM parameters.
+
+Since measured object emissivity effects Infra Red energy emitted, emissivity
+should be set before requesting the object temperature.
+
+Required properties:
+ - compatible: should be "melexis,mlx90632"
+ - reg: the I2C address of the sensor (default 0x3a)
+
+Example:
+
+mlx90632@3a {
+ compatible = "melexis,mlx90632";
+ reg = <0x3a>;
+};
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
new file mode 100644
index 000000000000..8dd7b3a7de65
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
@@ -0,0 +1,16 @@
+Broadcom VCHIQ firmware services
+
+Required properties:
+
+- compatible: Should be "brcm,bcm2835-vchiq"
+- reg: Physical base address and length of the doorbell register pair
+- interrupts: The interrupt number
+ See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
+Example:
+
+mailbox@7e00b840 {
+ compatible = "brcm,bcm2835-vchiq";
+ reg = <0x7e00b840 0xf>;
+ interrupts = <0 2>;
+};
diff --git a/Documentation/networking/dpaa2/index.rst b/Documentation/networking/dpaa2/index.rst
new file mode 100644
index 000000000000..4c6586c87969
--- /dev/null
+++ b/Documentation/networking/dpaa2/index.rst
@@ -0,0 +1,8 @@
+===================
+DPAA2 Documentation
+===================
+
+.. toctree::
+ :maxdepth: 1
+
+ overview
diff --git a/Documentation/networking/dpaa2/overview.rst b/Documentation/networking/dpaa2/overview.rst
new file mode 100644
index 000000000000..79fede4447d6
--- /dev/null
+++ b/Documentation/networking/dpaa2/overview.rst
@@ -0,0 +1,404 @@
+.. include:: <isonum.txt>
+
+DPAA2 (Data Path Acceleration Architecture Gen2) Overview
+=========================================================
+
+:Copyright: |copy| 2015 Freescale Semiconductor Inc.
+:Copyright: |copy| 2018 NXP
+
+This document provides an overview of the Freescale DPAA2 architecture
+and how it is integrated into the Linux kernel.
+
+Introduction
+============
+
+DPAA2 is a hardware architecture designed for high-speeed network
+packet processing. DPAA2 consists of sophisticated mechanisms for
+processing Ethernet packets, queue management, buffer management,
+autonomous L2 switching, virtual Ethernet bridging, and accelerator
+(e.g. crypto) sharing.
+
+A DPAA2 hardware component called the Management Complex (or MC) manages the
+DPAA2 hardware resources. The MC provides an object-based abstraction for
+software drivers to use the DPAA2 hardware.
+The MC uses DPAA2 hardware resources such as queues, buffer pools, and
+network ports to create functional objects/devices such as network
+interfaces, an L2 switch, or accelerator instances.
+The MC provides memory-mapped I/O command interfaces (MC portals)
+which DPAA2 software drivers use to operate on DPAA2 objects.
+
+The diagram below shows an overview of the DPAA2 resource management
+architecture::
+
+ +--------------------------------------+
+ | OS |
+ | DPAA2 drivers |
+ | | |
+ +-----------------------------|--------+
+ |
+ | (create,discover,connect
+ | config,use,destroy)
+ |
+ DPAA2 |
+ +------------------------| mc portal |-+
+ | | |
+ | +- - - - - - - - - - - - -V- - -+ |
+ | | | |
+ | | Management Complex (MC) | |
+ | | | |
+ | +- - - - - - - - - - - - - - - -+ |
+ | |
+ | Hardware Hardware |
+ | Resources Objects |
+ | --------- ------- |
+ | -queues -DPRC |
+ | -buffer pools -DPMCP |
+ | -Eth MACs/ports -DPIO |
+ | -network interface -DPNI |
+ | profiles -DPMAC |
+ | -queue portals -DPBP |
+ | -MC portals ... |
+ | ... |
+ | |
+ +--------------------------------------+
+
+
+The MC mediates operations such as create, discover,
+connect, configuration, and destroy. Fast-path operations
+on data, such as packet transmit/receive, are not mediated by
+the MC and are done directly using memory mapped regions in
+DPIO objects.
+
+Overview of DPAA2 Objects
+=========================
+
+The section provides a brief overview of some key DPAA2 objects.
+A simple scenario is described illustrating the objects involved
+in creating a network interfaces.
+
+DPRC (Datapath Resource Container)
+----------------------------------
+
+A DPRC is a container object that holds all the other
+types of DPAA2 objects. In the example diagram below there
+are 8 objects of 5 types (DPMCP, DPIO, DPBP, DPNI, and DPMAC)
+in the container.
+
+::
+
+ +---------------------------------------------------------+
+ | DPRC |
+ | |
+ | +-------+ +-------+ +-------+ +-------+ +-------+ |
+ | | DPMCP | | DPIO | | DPBP | | DPNI | | DPMAC | |
+ | +-------+ +-------+ +-------+ +---+---+ +---+---+ |
+ | | DPMCP | | DPIO | |
+ | +-------+ +-------+ |
+ | | DPMCP | |
+ | +-------+ |
+ | |
+ +---------------------------------------------------------+
+
+From the point of view of an OS, a DPRC behaves similar to a plug and
+play bus, like PCI. DPRC commands can be used to enumerate the contents
+of the DPRC, discover the hardware objects present (including mappable
+regions and interrupts).
+
+::
+
+ DPRC.1 (bus)
+ |
+ +--+--------+-------+-------+-------+
+ | | | | |
+ DPMCP.1 DPIO.1 DPBP.1 DPNI.1 DPMAC.1
+ DPMCP.2 DPIO.2
+ DPMCP.3
+
+Hardware objects can be created and destroyed dynamically, providing
+the ability to hot plug/unplug objects in and out of the DPRC.
+
+A DPRC has a mappable MMIO region (an MC portal) that can be used
+to send MC commands. It has an interrupt for status events (like
+hotplug).
+All objects in a container share the same hardware "isolation context".
+This means that with respect to an IOMMU the isolation granularity
+is at the DPRC (container) level, not at the individual object
+level.
+
+DPRCs can be defined statically and populated with objects
+via a config file passed to the MC when firmware starts it.
+
+DPAA2 Objects for an Ethernet Network Interface
+-----------------------------------------------
+
+A typical Ethernet NIC is monolithic-- the NIC device contains TX/RX
+queuing mechanisms, configuration mechanisms, buffer management,
+physical ports, and interrupts. DPAA2 uses a more granular approach
+utilizing multiple hardware objects. Each object provides specialized
+functions. Groups of these objects are used by software to provide
+Ethernet network interface functionality. This approach provides
+efficient use of finite hardware resources, flexibility, and
+performance advantages.
+
+The diagram below shows the objects needed for a simple
+network interface configuration on a system with 2 CPUs.
+
+::
+
+ +---+---+ +---+---+
+ CPU0 CPU1
+ +---+---+ +---+---+
+ | |
+ +---+---+ +---+---+
+ DPIO DPIO
+ +---+---+ +---+---+
+ \ /
+ \ /
+ \ /
+ +---+---+
+ DPNI --- DPBP,DPMCP
+ +---+---+
+ |
+ |
+ +---+---+
+ DPMAC
+ +---+---+
+ |
+ port/PHY
+
+Below the objects are described. For each object a brief description
+is provided along with a summary of the kinds of operations the object
+supports and a summary of key resources of the object (MMIO regions
+and IRQs).
+
+DPMAC (Datapath Ethernet MAC)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Represents an Ethernet MAC, a hardware device that connects to an Ethernet
+PHY and allows physical transmission and reception of Ethernet frames.
+
+- MMIO regions: none
+- IRQs: DPNI link change
+- commands: set link up/down, link config, get stats,
+ IRQ config, enable, reset
+
+DPNI (Datapath Network Interface)
+Contains TX/RX queues, network interface configuration, and RX buffer pool
+configuration mechanisms. The TX/RX queues are in memory and are identified
+by queue number.
+
+- MMIO regions: none
+- IRQs: link state
+- commands: port config, offload config, queue config,
+ parse/classify config, IRQ config, enable, reset
+
+DPIO (Datapath I/O)
+~~~~~~~~~~~~~~~~~~~
+Provides interfaces to enqueue and dequeue
+packets and do hardware buffer pool management operations. The DPAA2
+architecture separates the mechanism to access queues (the DPIO object)
+from the queues themselves. The DPIO provides an MMIO interface to
+enqueue/dequeue packets. To enqueue something a descriptor is written
+to the DPIO MMIO region, which includes the target queue number.
+There will typically be one DPIO assigned to each CPU. This allows all
+CPUs to simultaneously perform enqueue/dequeued operations. DPIOs are
+expected to be shared by different DPAA2 drivers.
+
+- MMIO regions: queue operations, buffer management
+- IRQs: data availability, congestion notification, buffer
+ pool depletion
+- commands: IRQ config, enable, reset
+
+DPBP (Datapath Buffer Pool)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Represents a hardware buffer pool.
+
+- MMIO regions: none
+- IRQs: none
+- commands: enable, reset
+
+DPMCP (Datapath MC Portal)
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+Provides an MC command portal.
+Used by drivers to send commands to the MC to manage
+objects.
+
+- MMIO regions: MC command portal
+- IRQs: command completion
+- commands: IRQ config, enable, reset
+
+Object Connections
+==================
+Some objects have explicit relationships that must
+be configured:
+
+- DPNI <--> DPMAC
+- DPNI <--> DPNI
+- DPNI <--> L2-switch-port
+
+ A DPNI must be connected to something such as a DPMAC,
+ another DPNI, or L2 switch port. The DPNI connection
+ is made via a DPRC command.
+
+::
+
+ +-------+ +-------+
+ | DPNI | | DPMAC |
+ +---+---+ +---+---+
+ | |
+ +==========+
+
+- DPNI <--> DPBP
+
+ A network interface requires a 'buffer pool' (DPBP
+ object) which provides a list of pointers to memory
+ where received Ethernet data is to be copied. The
+ Ethernet driver configures the DPBPs associated with
+ the network interface.
+
+Interrupts
+==========
+All interrupts generated by DPAA2 objects are message
+interrupts. At the hardware level message interrupts
+generated by devices will normally have 3 components--
+1) a non-spoofable 'device-id' expressed on the hardware
+bus, 2) an address, 3) a data value.
+
+In the case of DPAA2 devices/objects, all objects in the
+same container/DPRC share the same 'device-id'.
+For ARM-based SoC this is the same as the stream ID.
+
+
+DPAA2 Linux Drivers Overview
+============================
+
+This section provides an overview of the Linux kernel drivers for
+DPAA2-- 1) the bus driver and associated "DPAA2 infrastructure"
+drivers and 2) functional object drivers (such as Ethernet).
+
+As described previously, a DPRC is a container that holds the other
+types of DPAA2 objects. It is functionally similar to a plug-and-play
+bus controller.
+Each object in the DPRC is a Linux "device" and is bound to a driver.
+The diagram below shows the Linux drivers involved in a networking
+scenario and the objects bound to each driver. A brief description
+of each driver follows.
+
+::
+
+ +------------+
+ | OS Network |
+ | Stack |
+ +------------+ +------------+
+ | Allocator |. . . . . . . | Ethernet |
+ |(DPMCP,DPBP)| | (DPNI) |
+ +-.----------+ +---+---+----+
+ . . ^ |
+ . . <data avail, | | <enqueue,
+ . . tx confirm> | | dequeue>
+ +-------------+ . | |
+ | DPRC driver | . +---+---V----+ +---------+
+ | (DPRC) | . . . . . .| DPIO driver| | MAC |
+ +----------+--+ | (DPIO) | | (DPMAC) |
+ | +------+-----+ +-----+---+
+ |<dev add/remove> | |
+ | | |
+ +--------+----------+ | +--+---+
+ | MC-bus driver | | | PHY |
+ | | | |driver|
+ | /bus/fsl-mc | | +--+---+
+ +-------------------+ | |
+ | |
+ ========================= HARDWARE =========|=================|======
+ DPIO |
+ | |
+ DPNI---DPBP |
+ | |
+ DPMAC |
+ | |
+ PHY ---------------+
+ ============================================|========================
+
+A brief description of each driver is provided below.
+
+MC-bus driver
+-------------
+The MC-bus driver is a platform driver and is probed from a
+node in the device tree (compatible "fsl,qoriq-mc") passed in by boot
+firmware. It is responsible for bootstrapping the DPAA2 kernel
+infrastructure.
+Key functions include:
+
+- registering a new bus type named "fsl-mc" with the kernel,
+ and implementing bus call-backs (e.g. match/uevent/dev_groups)
+- implementing APIs for DPAA2 driver registration and for device
+ add/remove
+- creates an MSI IRQ domain
+- doing a 'device add' to expose the 'root' DPRC, in turn triggering
+ a bind of the root DPRC to the DPRC driver
+
+The binding for the MC-bus device-tree node can be consulted at
+*Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt*.
+The sysfs bind/unbind interfaces for the MC-bus can be consulted at
+*Documentation/ABI/testing/sysfs-bus-fsl-mc*.
+
+DPRC driver
+-----------
+The DPRC driver is bound to DPRC objects and does runtime management
+of a bus instance. It performs the initial bus scan of the DPRC
+and handles interrupts for container events such as hot plug by
+re-scanning the DPRC.
+
+Allocator
+---------
+Certain objects such as DPMCP and DPBP are generic and fungible,
+and are intended to be used by other drivers. For example,
+the DPAA2 Ethernet driver needs:
+
+- DPMCPs to send MC commands, to configure network interfaces
+- DPBPs for network buffer pools
+
+The allocator driver registers for these allocatable object types
+and those objects are bound to the allocator when the bus is probed.
+The allocator maintains a pool of objects that are available for
+allocation by other DPAA2 drivers.
+
+DPIO driver
+-----------
+The DPIO driver is bound to DPIO objects and provides services that allow
+other drivers such as the Ethernet driver to enqueue and dequeue data for
+their respective objects.
+Key services include:
+
+- data availability notifications
+- hardware queuing operations (enqueue and dequeue of data)
+- hardware buffer pool management
+
+To transmit a packet the Ethernet driver puts data on a queue and
+invokes a DPIO API. For receive, the Ethernet driver registers
+a data availability notification callback. To dequeue a packet
+a DPIO API is used.
+There is typically one DPIO object per physical CPU for optimum
+performance, allowing different CPUs to simultaneously enqueue
+and dequeue data.
+
+The DPIO driver operates on behalf of all DPAA2 drivers
+active in the kernel-- Ethernet, crypto, compression,
+etc.
+
+Ethernet driver
+---------------
+The Ethernet driver is bound to a DPNI and implements the kernel
+interfaces needed to connect the DPAA2 network interface to
+the network stack.
+Each DPNI corresponds to a Linux network interface.
+
+MAC driver
+----------
+An Ethernet PHY is an off-chip, board specific component and is managed
+by the appropriate PHY driver via an mdio bus. The MAC driver
+plays a role of being a proxy between the PHY driver and the
+MC. It does this proxy via the MC commands to a DPMAC object.
+If the PHY driver signals a link change, the MAC driver notifies
+the MC via a DPMAC command. If a network interface is brought
+up or down, the MC notifies the DPMAC driver via an interrupt and
+the driver can take appropriate action.
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 90966c2692d8..f204eaff657d 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -8,6 +8,7 @@ Contents:
batman-adv
can
+ dpaa2/index
kapi
z8530book
msg_zerocopy
diff --git a/Documentation/networking/irda.txt b/Documentation/networking/irda.txt
deleted file mode 100644
index bff26c138be6..000000000000
--- a/Documentation/networking/irda.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-To use the IrDA protocols within Linux you will need to get a suitable copy
-of the IrDA Utilities. More detailed information about these and associated
-programs can be found on http://irda.sourceforge.net/
-
-For more information about how to use the IrDA protocol stack, see the
-Linux Infrared HOWTO by Werner Heuser <wehe@tuxmobil.org>:
-<http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html>
-
-There is an active mailing list for discussing Linux-IrDA matters called
- irda-users@lists.sourceforge.net