summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x8
-rw-r--r--Documentation/ABI/testing/sysfs-bus-counter35
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio126
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-bno05581
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-cdc-ad774611
-rw-r--r--Documentation/ABI/testing/sysfs-devices-hisi_ptt61
-rw-r--r--Documentation/ABI/testing/sysfs-driver-habanalabs12
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml6
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml3
-rw-r--r--Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml61
-rw-r--r--Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml7
-rw-r--r--Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml39
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml17
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml53
-rw-r--r--Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml12
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml26
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml69
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml12
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml56
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml3
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml11
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml4
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml11
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/frequency/adf4371.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml59
-rw-r--r--Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml12
-rw-r--r--Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml49
-rw-r--r--Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/pressure/bmp085.yaml4
-rw-r--r--Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/st,st-sensors.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml4
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml4
-rw-r--r--Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml1
-rw-r--r--Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml45
-rw-r--r--Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml3
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
-rw-r--r--Documentation/iio/bno055.rst51
-rw-r--r--Documentation/iio/index.rst2
-rw-r--r--Documentation/trace/coresight/coresight-cpu-debug.rst3
-rw-r--r--Documentation/trace/coresight/coresight-etm4x-reference.rst14
-rw-r--r--Documentation/trace/hisi-ptt.rst298
-rw-r--r--Documentation/trace/index.rst1
129 files changed, 1563 insertions, 268 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 8e53a32f8150..08b1964f27d3 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -516,3 +516,11 @@ Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (Read) Returns the number of special conditional P1 right-hand keys
that the trace unit can use (0x194). The value is taken
directly from the HW.
+
+What: /sys/bus/coresight/devices/etm<N>/ts_source
+Date: October 2022
+KernelVersion: 6.1
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org> or Suzuki K Poulose <suzuki.poulose@arm.com>
+Description: (Read) When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for
+ trace session. Otherwise -1 indicates an unknown time source. Check
+ trcidr0.tssize to see if a global timestamp is available.
diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index 06c2b3e27e0b..ff83320b4255 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -4,6 +4,12 @@ Contact: linux-iio@vger.kernel.org
Description:
Count data of Count Y represented as a string.
+What: /sys/bus/counter/devices/counterX/countY/capture
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Historical capture of the Count Y count data.
+
What: /sys/bus/counter/devices/counterX/countY/ceiling
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
@@ -203,6 +209,13 @@ Description:
both edges:
Any state transition.
+What: /sys/bus/counter/devices/counterX/countY/num_overflows
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute indicates the number of overflows of count Y.
+
+What: /sys/bus/counter/devices/counterX/countY/capture_component_id
What: /sys/bus/counter/devices/counterX/countY/ceiling_component_id
What: /sys/bus/counter/devices/counterX/countY/floor_component_id
What: /sys/bus/counter/devices/counterX/countY/count_mode_component_id
@@ -213,11 +226,14 @@ What: /sys/bus/counter/devices/counterX/countY/prescaler_component_id
What: /sys/bus/counter/devices/counterX/countY/preset_component_id
What: /sys/bus/counter/devices/counterX/countY/preset_enable_component_id
What: /sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
+What: /sys/bus/counter/devices/counterX/countY/num_overflows_component_id
What: /sys/bus/counter/devices/counterX/signalY/cable_fault_component_id
What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
What: /sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
+What: /sys/bus/counter/devices/counterX/signalY/polarity_component_id
What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
+What: /sys/bus/counter/devices/counterX/signalY/frequency_component_id
KernelVersion: 5.16
Contact: linux-iio@vger.kernel.org
Description:
@@ -303,6 +319,19 @@ Description:
Discrete set of available values for the respective Signal Y
configuration are listed in this file.
+What: /sys/bus/counter/devices/counterX/signalY/polarity
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Active level of Signal Y. The following polarity values are
+ available:
+
+ positive:
+ Signal high state considered active level (rising edge).
+
+ negative:
+ Signal low state considered active level (falling edge).
+
What: /sys/bus/counter/devices/counterX/signalY/name
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
@@ -345,3 +374,9 @@ Description:
via index_polarity. The index function (as enabled via
preset_enable) is performed synchronously with the
quadrature clock on the active level of the index input.
+
+What: /sys/bus/counter/devices/counterX/signalY/frequency
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read-only attribute that indicates the signal Y frequency, in Hz.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index e81ba6f5e1c8..6ba34c0d9789 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -196,7 +196,7 @@ Description:
Raw capacitance measurement from channel Y. Units after
application of scale and offset are nanofarads.
-What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
KernelVersion: 3.2
Contact: linux-iio@vger.kernel.org
Description:
@@ -207,6 +207,25 @@ Description:
is required is a consistent labeling. Units after application
of scale and offset are nanofarads.
+What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ For differential channels, this an offset that is applied
+ equally to both inputs. As the reading is of the difference
+ between the two inputs, this should not be applied to the _raw
+ reading by userspace (unlike _offset) and unlike calibbias
+ it does not affect the differential value measured because
+ the effect of _zeropoint cancels out across the two inputs
+ that make up the differential pair. It's purpose is to bring
+ the individual signals, before the differential is measured,
+ within the measurement range of the device. The naming is
+ chosen because if the separate inputs that make the
+ differential pair are drawn on a graph in their
+ _raw units, this is the value that the zero point on the
+ measurement axis represents. It is expressed with the
+ same scaling as _raw.
+
What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw
What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw
What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
@@ -241,6 +260,15 @@ Description:
Has all of the equivalent parameters as per voltageY. Units
after application of scale and offset are m/s^2.
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ As per in_accel_X_raw attributes, but minus the
+ acceleration due to gravity.
+
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
@@ -2038,3 +2066,99 @@ Description:
Available range for the forced calibration value, expressed as:
- a range specified as "[min step max]"
+
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
+What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
+What: /sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
+KernelVersion: 5.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Some devices have separate controls of sampling frequency for
+ individual channels. If multiple channels are enabled in a scan,
+ then the sampling_frequency of the scan may be computed from the
+ per channel sampling frequencies.
+
+What: /sys/.../events/in_accel_gesture_singletap_en
+What: /sys/.../events/in_accel_gesture_doubletap_en
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Device generates an event on a single or double tap.
+
+What: /sys/.../events/in_accel_gesture_singletap_value
+What: /sys/.../events/in_accel_gesture_doubletap_value
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the threshold value that the device is comparing
+ against to generate the tap gesture event. The lower
+ threshold value increases the sensitivity of tap detection.
+ Units and the exact meaning of value are device-specific.
+
+What: /sys/.../events/in_accel_gesture_tap_value_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available threshold values which can be used to
+ modify the sensitivity of the tap detection.
+
+What: /sys/.../events/in_accel_gesture_singletap_reset_timeout
+What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the timeout value in seconds for the tap detector
+ to not to look for another tap event after the event as
+ occurred. Basically the minimum quiet time between the two
+ single-tap's or two double-tap's.
+
+What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available tap reset timeout values. Units in seconds.
+
+What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the minimum quiet time in seconds between the two
+ taps of a double tap.
+
+What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available delay values between two taps in the double
+ tap. Units in seconds.
+
+What: /sys/.../events/in_accel_gesture_tap_maxtomin_time
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the maximum time difference allowed between upper
+ and lower peak of tap to consider it as the valid tap event.
+ Units in seconds.
+
+What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available time values between upper peak to lower
+ peak. Units in seconds.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled) euler angles readings. Units after
+ application of scale are deg.
+
+What: /sys/bus/iio/devices/iio:deviceX/serialnumber
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ An example format is 16-bytes, 2-digits-per-byte, HEX-string
+ representing the sensor unique ID number.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-bno055 b/Documentation/ABI/testing/sysfs-bus-iio-bno055
new file mode 100644
index 000000000000..f32b1644e986
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-bno055
@@ -0,0 +1,81 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled) range for acceleration readings. Unit after
+ application of scale is m/s^2. Note that this doesn't affects
+ the scale (which should be used when changing the maximum and
+ minimum readable value affects also the reading scaling factor).
+
+What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Range for angular velocity readings in radians per second. Note
+ that this does not affects the scale (which should be used when
+ changing the maximum and minimum readable value affects also the
+ reading scaling factor).
+
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ List of allowed values for in_accel_raw_range attribute
+
+What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ List of allowed values for in_anglvel_raw_range attribute
+
+What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Can be 1 or 0. Enables/disables the "Fast Magnetometer
+ Calibration" HW function.
+
+What: /sys/bus/iio/devices/iio:deviceX/fusion_enable
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a.
+ NDOF) HW function.
+
+What: /sys/bus/iio/devices/iio:deviceX/calibration_data
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the binary calibration data blob for the IMU sensors.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the autocalibration status for the accelerometer sensor.
+ Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+ the number, the better the calibration status.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the autocalibration status for the gyroscope sensor.
+ Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+ the number, the better the calibration status.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the autocalibration status for the magnetometer sensor.
+ Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+ the number, the better the calibration status.
+
+What: /sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the status for the IMU overall autocalibration.
+ Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+ the number, the better the calibration status.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746
new file mode 100644
index 000000000000..02ca8941dce1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746
@@ -0,0 +1,11 @@
+What: /sys/.../iio:deviceX/in_capacitableY_calibbias_calibration
+What: /sys/.../iio:deviceX/in_capacitableY_calibscale_calibration
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Write 1 to trigger a calibration of the calibbias or
+ calibscale. For calibscale, a full scale capacitance should
+ be connected to the capacitance input and a
+ calibscale_calibration then started. For calibbias see
+ the device datasheet section on "capacitive system offset
+ calibration".
diff --git a/Documentation/ABI/testing/sysfs-devices-hisi_ptt b/Documentation/ABI/testing/sysfs-devices-hisi_ptt
new file mode 100644
index 000000000000..82de6d710266
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-hisi_ptt
@@ -0,0 +1,61 @@
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: This directory contains files for tuning the PCIe link
+ parameters(events). Each file is named after the event
+ of the PCIe link.
+
+ See Documentation/trace/hisi-ptt.rst for more information.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Controls the weight of Tx completion TLPs, which influence
+ the proportion of outbound completion TLPs on the PCIe link.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Controls the weight of Tx non-posted TLPs, which influence
+ the proportion of outbound non-posted TLPs on the PCIe link.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Controls the weight of Tx posted TLPs, which influence the
+ proportion of outbound posted TLPs on the PCIe link.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Control the allocated buffer watermark for inbound packets.
+ The packets will be stored in the buffer first and then transmitted
+ either when the watermark reached or when timed out.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Control the allocated buffer watermark of outbound packets.
+ The packets will be stored in the buffer first and then transmitted
+ either when the watermark reached or when timed out.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
index 96646fb2e7a1..13b5b2ec3be7 100644
--- a/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -16,7 +16,7 @@ Description: Version of the application running on the device's CPU
What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
Date: Jun 2019
-KernelVersion: not yet upstreamed
+KernelVersion: 5.7
Contact: ogabbay@kernel.org
Description: Allows the user to set the maximum clock frequency, in MHz.
The device clock might be set to lower value than the maximum.
@@ -26,7 +26,7 @@ Description: Allows the user to set the maximum clock frequency, in MHz.
What: /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz
Date: Jun 2019
-KernelVersion: not yet upstreamed
+KernelVersion: 5.7
Contact: ogabbay@kernel.org
Description: Displays the current frequency, in MHz, of the device clock.
This property is valid only for the Gaudi ASIC family
@@ -176,6 +176,12 @@ KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Version of the device's preboot F/W code
+What: /sys/class/habanalabs/hl<n>/security_enabled
+Date: Oct 2022
+KernelVersion: 6.1
+Contact: obitton@habana.ai
+Description: Displays the device's security status
+
What: /sys/class/habanalabs/hl<n>/soft_reset
Date: Jan 2019
KernelVersion: 5.1
@@ -230,6 +236,6 @@ Description: Version of the u-boot running on the device's CPU
What: /sys/class/habanalabs/hl<n>/vrm_ver
Date: Jan 2022
-KernelVersion: not yet upstreamed
+KernelVersion: 5.17
Contact: ogabbay@kernel.org
Description: Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
index d783d9276124..2bae06eed693 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
@@ -61,6 +61,9 @@ properties:
maxItems: 1
description: Address translation error interrupt
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
index 72ffe4d1e948..0c5b875cb654 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -98,6 +98,9 @@ properties:
base cti node if compatible string arm,coresight-cti-v8-arch is used,
or may appear in a trig-conns child node when appropriate.
+ power-domains:
+ maxItems: 1
+
arm,cti-ctm-id:
$ref: /schemas/types.yaml#/definitions/uint32
description:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
index 1eeedc22857c..44a1041cb0fc 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
@@ -54,6 +54,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
index a26ed9214e00..03792e9bd97a 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
@@ -54,6 +54,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
qcom,replicator-loses-context:
type: boolean
description:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
index fd06ede26ceb..90679788e0bf 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
@@ -54,6 +54,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
index e0377ce48537..01200f67504a 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
@@ -73,6 +73,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
arm,coresight-loses-context-with-cpu:
type: boolean
description:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
index 374083956b20..cc8c3baa79b4 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
@@ -27,6 +27,9 @@ properties:
compatible:
const: arm,coresight-static-funnel
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
index a34d8583830c..1892a091ac35 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -27,6 +27,9 @@ properties:
compatible:
const: arm,coresight-static-replicator
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
index 905008faa012..378380c3f5aa 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
@@ -61,6 +61,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
out-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
index 3463b6e53aef..cb8dceaca70e 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -55,6 +55,12 @@ properties:
- const: apb_pclk
- const: atclk
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
arm,buffer-size:
$ref: /schemas/types.yaml#/definitions/uint32
deprecated: true
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
index e80d48200c37..61a0cdc27745 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
@@ -54,6 +54,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
index 5f07fb166c56..108460627d9a 100644
--- a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
@@ -33,6 +33,9 @@ properties:
Handle to the cpu this ETE is bound to.
$ref: /schemas/types.yaml#/definitions/phandle
+ power-domains:
+ maxItems: 1
+
out-ports:
description: |
Output connections from the ETE to legacy CoreSight trace bus.
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 000000000000..4e0b2d2b303e
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+ - Julien Panis <jpanis@baylibre.com>
+
+description: |
+ The eCAP module resources can be used to capture timestamps
+ on input signal events (falling/rising edges).
+
+properties:
+ compatible:
+ const: ti,am62-ecap-capture
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: fck
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ capture@23100000 { /* eCAP in capture mode on am62x */
+ compatible = "ti,am62-ecap-capture";
+ reg = <0x00 0x23100000 0x00 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 51 0>;
+ clock-names = "fck";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
index aee45cb15592..527532f039ce 100644
--- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
+++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
@@ -22,13 +22,14 @@ properties:
description: SPI chip select
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
new file mode 100644
index 000000000000..3dbdc5af2804
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description: |
+ The POWER processor On-Chip Controller (OCC) helps manage power and
+ thermals for the system. A service processor or baseboard management
+ controller can query the OCC for it's power and thermal data to report
+ through hwmon.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-occ-hwmon
+ - ibm,p10-occ-hwmon
+
+ ibm,no-poll-on-init:
+ description: This property describes whether or not the OCC should
+ be polled during driver initialization.
+ type: boolean
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 6f8f8a6258fe..7332442e5661 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -27,15 +27,16 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 8d829ef878bc..f6f97164c2ca 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -25,14 +25,15 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
index d6afc1b8c272..185b68ffb536 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -4,28 +4,30 @@
$id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Analog Devices ADXL313 3-Axis Digital Accelerometer
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
maintainers:
- Lucas Stankus <lucas.p.stankus@gmail.com>
description: |
- Analog Devices ADXL313 3-Axis Digital Accelerometer that supports
- both I2C & SPI interfaces.
+ Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+ support both I2C & SPI interfaces.
+ https://www.analog.com/en/products/adxl312.html
https://www.analog.com/en/products/adxl313.html
+ https://www.analog.com/en/products/adxl314.html
properties:
compatible:
enum:
+ - adi,adxl312
- adi,adxl313
+ - adi,adxl314
reg:
maxItems: 1
spi-3wire: true
- spi-max-frequency: true
-
vs-supply:
description: Regulator that supplies power to the accelerometer
@@ -48,7 +50,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 9bb039e2f533..346abfb13a3a 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,8 +32,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -42,7 +40,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
index ba54d6998f2e..14b487088ab4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -45,13 +45,14 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
index d259e796c1d6..f10d98d34cb8 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -35,8 +35,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -45,7 +43,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 38b59b6454ce..73a5c8f814cc 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -25,14 +25,15 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 942b23ad0712..5dd06f5905b4 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -20,8 +20,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdda-supply: true
vddd-supply: true
vddio-supply: true
@@ -30,7 +28,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 478e75ae0885..457a709b583c 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -72,7 +72,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
index 272eb48eef5a..3cb82576d758 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -24,8 +24,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -50,7 +48,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
index 9c7c66feeffc..c8659c5eba2a 100644
--- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -39,13 +39,14 @@ properties:
- "INT1"
- "INT2"
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
index 390b87242fcb..f64d99b35492 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -29,13 +29,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
new file mode 100644
index 000000000000..23528dcaa073
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+ - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+ MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+ sensitivity consumer applications. It has dynamical user selectable full
+ scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+ with output data rates from 1Hz to 1000Hz.
+ Datasheet can be found at following URL
+ https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+ compatible:
+ const: memsensing,msa311
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ accelerometer@62 {
+ compatible = "memsensing,msa311";
+ reg = <0x62>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&vcc_5v>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
index f6e2a16a710b..00c990caa1e4 100644
--- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -29,7 +29,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index ad529ab2c6e2..65ce8ea14b52 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -27,8 +27,6 @@ properties:
vdd-supply:
description: phandle to the regulator that provides power to the accelerometer
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -44,7 +42,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index fb3d0dae9bae..75a7184a4735 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -52,8 +52,6 @@ properties:
avdd-supply:
description: avdd supply can be used as reference for conversion.
- spi-max-frequency: true
-
required:
- compatible
- reg
@@ -106,7 +104,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 22b7ed3723f6..cc347dade4ef 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -30,8 +30,6 @@ properties:
spi-cpha: true
- spi-max-frequency: true
-
clocks:
maxItems: 1
description: phandle to the master clock (mclk)
@@ -94,7 +92,10 @@ required:
- spi-cpol
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
index a694d5794d4a..dfb8f305e2f0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
@@ -28,8 +28,6 @@ properties:
description: IRQ line for the ADC
maxItems: 1
- spi-max-frequency: true
-
adi,voltage-alert-last-chan:
$ref: /schemas/types.yaml#/definitions/uint32
description:
@@ -55,7 +53,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index a3e39a40c9b3..1bfbeed6f299 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -30,8 +30,6 @@ properties:
spi-cpha: true
- spi-max-frequency: true
-
'#address-cells':
const: 1
@@ -65,7 +63,10 @@ patternProperties:
additionalProperties: true
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
index ca414bb396c5..cd8ac5162d27 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
@@ -24,13 +24,15 @@ properties:
vref-supply: true
vdd-supply: true
- spi-max-frequency: true
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index 666414a9c0de..44c671eeda73 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -66,8 +66,6 @@ properties:
to the other supplies. Needed to be able to establish channel scaling
unless there is also an internal reference available (e.g. ad7091r)
- spi-max-frequency: true
-
adi,conversion-start-gpios:
description: A GPIO used to trigger the start of a conversion
maxItems: 1
@@ -76,9 +74,9 @@ required:
- compatible
- reg
-additionalProperties: false
-
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
# Devices where reference is vcc
- if:
properties:
@@ -158,6 +156,8 @@ allOf:
properties:
adi,conversion-start-gpios: false
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 516fc24d3346..ac5a47c8f070 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -32,8 +32,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
avcc-supply: true
interrupts:
@@ -105,7 +103,10 @@ required:
- interrupts
- adi,conversion-start-gpios
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index a85a28145ef6..3ce59d4d065f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -50,8 +50,6 @@ properties:
reset-gpios:
maxItems: 1
- spi-max-frequency: true
-
spi-cpol: true
spi-cpha: true
@@ -88,7 +86,10 @@ patternProperties:
- reg
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index e82194974eea..07f9d1c09c7d 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
- - Patrick Vasseur <patrick.vasseur@c-s.fr>
description: |
Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
@@ -37,19 +36,24 @@ properties:
description: |
The regulator supply for ADC reference voltage.
+ adi,range-double:
+ description: Sets the analog input range from 0 to 2xVREF.
+ type: boolean
+
'#address-cells':
const: 1
'#size-cells':
const: 0
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 0b10ed5f74ae..9ee4d977c5ed 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -49,8 +49,6 @@ properties:
default: 4096000
- spi-max-frequency: true
-
'#io-channel-cells':
const: 1
@@ -64,7 +62,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
index 52490cbb0af0..56bcbe5dcd79 100644
--- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -24,8 +24,6 @@ properties:
GPIO used for controlling the reset pin
maxItems: 1
- spi-max-frequency: true
-
"#io-channel-cells":
const: 1
@@ -33,7 +31,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 0bd2fc0356c8..5207c919abe0 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -22,15 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency:
- description: maximal spi bus frequency supported
-
required:
- compatible
- vref-supply
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
index c1772b568cd1..875f394576c2 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -13,10 +13,14 @@ description: |
16bit ADC supporting up to 16 single ended or 8 differential inputs.
I2C interface.
+ https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+
properties:
compatible:
- const:
- lltc,ltc2497
+ enum:
+ - lltc,ltc2497
+ - lltc,ltc2499
reg: true
vref-supply: true
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index 46b7747076b9..d0a7ed26d9ea 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -45,7 +45,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
index 0cf87556ef82..4f74cb33383a 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -26,13 +26,16 @@ properties:
minimum: 100000
maximum: 4800000
-additionalProperties: false
-
required:
- compatible
- reg
- vref-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
index e948b3e37b0c..bb336e33ebe2 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -28,23 +28,25 @@ properties:
vref-supply:
description: External reference, needed to establish input scaling
-if:
- properties:
- compatible:
- contains:
- const: maxim,max1118
-then:
- required:
- - vref-supply
-else:
- properties:
- vref-supply: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: maxim,max1118
+ then:
+ required:
+ - vref-supply
+ else:
+ properties:
+ vref-supply: false
required:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
new file mode 100644
index 000000000000..5f9e043cf5cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+ - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+ The MAX11205 is an ultra-low-power (< 300FA max active current),
+ high-resolution, serial-output ADC.
+
+ https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - maxim,max11205a
+ - maxim,max11205b
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 5000000
+
+ spi-cpha: true
+
+ vref-supply:
+ description:
+ The regulator supply for the ADC reference voltage. This is a differential
+ reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - spi-max-frequency
+ - spi-cpha
+ - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adc@0 {
+ compatible = "maxim,max11205a";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpha;
+ interrupt-parent = <&gpio>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ vref-supply = <&max11205_vref>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 4c7e0d94bff1..58b12fe8070c 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -39,15 +39,16 @@ properties:
thus enabling power-down mode.
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- vdd-supply
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
index fcc1ba53b20d..18108f0f3731 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -32,7 +32,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
spi-cpol: true
@@ -51,7 +50,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 95ab285f4eba..2c93fb41f172 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -36,6 +36,13 @@ properties:
description: IRQ line of the ADC
maxItems: 1
+ microchip,data-ready-hiz:
+ description:
+ Data Ready Pin Inactive State Control
+ true = The DR pin state is high-impedance
+ false = The DR pin state is logic high
+ type: boolean
+
microchip,device-addr:
description: Device address when multiple MCP3911 chips are present on the same SPI bus.
$ref: /schemas/types.yaml#/definitions/uint32
@@ -51,7 +58,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 74a4a9d95798..8bac0c4120dd 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -58,6 +58,7 @@ required:
patternProperties:
"^.*@[0-9a-f]+$":
type: object
+ additionalProperties: false
description: |
Represents the external channels which are connected to the ADC.
For compatible property "qcom,spmi-vadc" following channels, also known as
diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
new file mode 100644
index 000000000000..88e008629ea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
+
+maintainers:
+ - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+ The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+ interface, and the device provides full information for system by reading
+ out the loading current and power.
+
+ The device monitors both of the drops across sense resistor and the BUS
+ voltage, converts into the current in amperes, and power in watts through
+ internal analog-to-digital converter ADC. The programmable calibration,
+ adjustable conversion time, and averaging function are also built in for
+ more design flexibility.
+
+ Datasheet is available at
+ https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+
+properties:
+ compatible:
+ const: richtek,rtq6056
+
+ reg:
+ maxItems: 1
+
+ "#io-channel-cells":
+ const: 1
+
+ shunt-resistor-micro-ohms:
+ description: Shunt IN+/IN- sensing node resistor
+
+required:
+ - compatible
+ - reg
+ - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adc@40 {
+ compatible = "richtek,rtq6056";
+ reg = <0x40>;
+ #io-channel-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 92f9472a77ae..1970503389aa 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -72,6 +72,7 @@ additionalProperties: false
patternProperties:
"^filter@[0-9]+$":
type: object
+ unevaluatedProperties: false
description: child node
properties:
@@ -225,6 +226,7 @@ patternProperties:
patternProperties:
"^dfsdm-dai+$":
type: object
+ additionalProperties: false
description: child node
properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
index 9049c699152f..333744a2159c 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -13,8 +13,7 @@ description:
This ADC forms part of an ST microelectronics STMPE multifunction device .
The ADC is shared with the STMPE touchscreen. As a result some ADC related
settings are specified in the parent node.
- The node name myst be stmpe_adc and should be a child node of the stmpe node
- to which it belongs.
+ The node should be a child node of the stmpe node to which it belongs.
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
index f5a923cc847f..686721176a58 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -24,8 +24,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: External reference, needed to establish input scaling
@@ -37,7 +35,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
index 1a113b30a414..726d2cbfa368 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
@@ -19,8 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: External reference, needed to establish input scaling
@@ -37,7 +35,10 @@ required:
- spi-cpol
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index ae5ce60987fe..9b072b057f16 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -19,7 +19,6 @@ properties:
reg: true
vref-supply: true
- spi-max-frequency: true
"#io-channel-cells":
const: 1
@@ -28,7 +27,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
index ec3b2edf1fb7..076088a328c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -31,8 +31,6 @@ properties:
maxItems: 1
description: Conversion clock input.
- spi-max-frequency: true
-
vref-p-supply:
description: The regulator supply for positive analog voltage reference
@@ -62,7 +60,10 @@ required:
- clocks
- vref-p-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
index d54a0183f024..775eee972b12 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -27,8 +27,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
"#io-channel-cells":
@@ -39,7 +37,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
index 3f4f334d6f73..afe782522904 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -21,8 +21,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdda-supply: true
"#io-channel-cells":
@@ -32,7 +30,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index a3b79438a13a..2c3c2cf2145c 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -43,6 +43,7 @@ additionalProperties: false
patternProperties:
"^channel@[0-7]+$":
type: object
+ additionalProperties: false
description:
Child nodes needed for each channel that the platform uses.
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
index 2e6abc9d746a..56a3f1766aab 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
@@ -18,8 +18,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
spi-cpha: true
reset-gpios:
@@ -32,7 +30,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
index e0670e3fbb72..55c2c73626f4 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
maintainers:
- - Tomislav Denis <tomislav.denis@avl.com>
+ - Jonathan Cameron <jic23@kernel.org>
description: |
The ADS131E0x are a family of multichannel, simultaneous sampling,
@@ -28,8 +28,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
spi-cpha: true
clocks:
@@ -120,7 +118,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
index b8c398187d5c..f75b2c702986 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -19,8 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: Supply the 2.5V or 5V reference voltage
@@ -32,7 +30,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
index a0af4b24877f..f26fdbc15f84 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -25,13 +25,14 @@ properties:
description: Optional external reference. If not supplied, assume
REFSEL input tied low to enable the internal reference.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
index d6f21d5cccd7..b32be24a9f98 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -11,9 +11,14 @@ maintainers:
properties:
compatible:
- enum:
- - ti,am3359-adc
- - ti,am4372-adc
+ oneOf:
+ - enum:
+ - ti,am3359-adc
+ - ti,am4372-adc
+ - items:
+ - enum:
+ - ti,am654-adc
+ - const: ti,am3359-adc
'#io-channel-cells':
const: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
index 6c2539b3d707..314d1d99bf73 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -21,8 +21,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
"#io-channel-cells":
@@ -33,7 +31,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 601d69971d84..bdf3bba2d750 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -23,7 +23,8 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
+ vref-supply:
+ description: Optional supply of the reference voltage
"#io-channel-cells":
const: 1
@@ -59,7 +60,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
index 3698b4b0900f..be93c109d6ac 100644
--- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -134,6 +134,7 @@ properties:
ams-pl@400:
type: object
+ additionalProperties: false
description:
PL-SYSMON is capable of monitoring off chip voltage and temperature.
PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
index baa65a521bad..03bb90a7f4f8 100644
--- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -63,6 +63,7 @@ additionalProperties: false
patternProperties:
"^channel@[0-3]$":
type: object
+ additionalProperties: false
description: Represents the external channels which are connected to the device.
properties:
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
index 5277479be382..c15da155d300 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -27,14 +27,15 @@ properties:
Enable internal buffer to drive the reference pin.
type: boolean
- spi-max-frequency: true
-
required:
- compatible
- reg
- avdd-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index 9c48c76993fe..fee0f023a8c8 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -78,6 +78,7 @@ patternProperties:
custom-output-range-config:
type: object
+ additionalProperties: false
description: Configuration of custom range when
adi,output-range-microvolt is not present.
The formulas for calculation the output voltages are
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
index 05ed4e0ec364..c04165fa9259 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
@@ -95,15 +95,12 @@ properties:
vrefD-supply: true
vref-supply: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- # Shared external vref, no internal reference
if:
properties:
@@ -232,6 +229,8 @@ allOf:
- vrefA-supply
- vrefB-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
index 65f86f26947c..86e2884cdfb1 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
@@ -28,10 +28,6 @@ properties:
vref1-supply: true
vref2-supply: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
@@ -39,6 +35,7 @@ required:
- vref1-supply
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -63,6 +60,8 @@ allOf:
required:
- vref2-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
index d599b418a020..ff50c72c62b5 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -39,14 +39,15 @@ properties:
description:
If not supplied devices will use internal regulators.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
index 188f656617e3..52d089ebde95 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
@@ -26,13 +26,14 @@ properties:
maxItems: 1
description: Fault signal.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
index 044332c97743..d2af2d491986 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
@@ -27,19 +27,16 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
VREF-supply: true
VREFA-supply: true
VREFB-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -72,6 +69,8 @@ allOf:
- VREFA-supply
- VREFB-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
index 330383b85eeb..4d5111a5f9bd 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
@@ -22,17 +22,18 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: If not present, internal reference will be used.
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
index 5c26441eae9f..13f214234b8e 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -53,14 +53,15 @@ properties:
vcc-supply:
description: If not supplied the internal reference is used.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
index f866b88e1440..9a3c2926bf85 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
@@ -25,8 +25,6 @@ properties:
description: Either this or spi-cpol but not both.
spi-cpol: true
- spi-max-frequency: true
-
adi,ext-dc-dc-compenstation-resistor:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -67,8 +65,6 @@ required:
- compatible
- reg
-additionalProperties: false
-
patternProperties:
"^channel@[0-7]$":
type: object
@@ -123,6 +119,11 @@ oneOf:
- required:
- spi-cpol
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
index fd4edca34a28..e49e7556175d 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -16,7 +16,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
adi,dc-dc-mode:
@@ -99,6 +98,7 @@ required:
- adi,dc-dc-mode
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
adi,dc-dc-mode:
@@ -115,7 +115,7 @@ allOf:
required:
- adi,range-microvolt
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
index 7f95a9ed55fe..df550b5af2f7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
@@ -22,18 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: If not supplied, internal reference will be used.
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -45,6 +42,8 @@ allOf:
required:
- vref-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
index 8e893d52bfb1..0b409a727a43 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
@@ -22,18 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vrefAB-supply: true
vrefCD-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -46,6 +43,8 @@ allOf:
- vrefAB-supply
- vrefCD-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index 24ac40180ac1..8e7da0de918f 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -49,8 +49,6 @@ properties:
asserted during driver probe.
maxItems: 1
- spi-max-frequency: true
-
'#address-cells':
const: 1
@@ -62,6 +60,7 @@ properties:
connected to the DAC. Channel 0 can act both as a current
source and sink.
type: object
+ additionalProperties: false
properties:
reg:
@@ -85,6 +84,7 @@ properties:
description: Represents an external channel which are
connected to the DAC.
type: object
+ additionalProperties: false
properties:
reg:
@@ -101,6 +101,7 @@ properties:
description: Represents an external channel which are
connected to the DAC.
type: object
+ additionalProperties: false
properties:
reg:
@@ -116,6 +117,7 @@ properties:
patternProperties:
"^channel@([3-5])$":
type: object
+ additionalProperties: false
description: Represents the external channels which are connected to the DAC.
properties:
reg:
@@ -138,7 +140,10 @@ required:
- channel@4
- channel@5
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index 650d1ebdcec3..3a84739736f6 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -23,19 +23,20 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vss-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vdd-supply
- vss-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
index 6a3990a8d0ad..1849a2ff05c7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
@@ -19,19 +19,16 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vrefh-supply: true
vrefl-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vrefh-supply
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -44,6 +41,8 @@ allOf:
properties:
vrefl-supply: false
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
index 48f9e7d29423..15cc6bf59b13 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -48,6 +48,7 @@ properties:
patternProperties:
"^channel@([0-9]|1[0-5])$":
type: object
+ additionalProperties: false
properties:
reg:
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
index 4c430abcdbf9..19374401e509 100644
--- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
@@ -21,17 +21,18 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vref-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
index b0157050f1ee..201b04af2b22 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
@@ -33,21 +33,22 @@ properties:
vref-supply:
description: Needed to provide output scaling.
- spi-max-frequency: true
-
required:
- compatible
- reg
- vref-supply
-additionalProperties: false
-
oneOf:
- required:
- spi-cpha
- required:
- spi-cpol
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
vref_2v5_reg: regulator-vref {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
index 10be98d1f19c..a6814587dbc4 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
@@ -24,14 +24,15 @@ properties:
Reference voltage must be supplied to establish the scaling of the
output voltage.
- spi-max-frequency: true
-
required:
- compatible
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
index d172b142f6ed..20dd1370660d 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -29,13 +29,14 @@ properties:
DACs are loaded when the pin connected to this GPIO is pulled low.
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 6b3a611e1cf1..0144f74a4768 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -40,15 +40,16 @@ properties:
output stage will shut down until the ADF4371/ADF4372 achieves lock as
measured by the digital lock detect circuitry.
- spi-max-frequency: true
-
required:
- compatible
- reg
- clocks
- clock-names
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
index d861526c5c42..6c5ad426a016 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -25,14 +25,15 @@ properties:
reset-gpios: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 340be256f283..d166dbca18c3 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,8 +25,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -35,7 +33,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
index dd29dc6c4c19..56e0dc20f5e4 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -47,8 +47,6 @@ properties:
- DIO3
- DIO4
- spi-max-frequency: true
-
spi-cpha: true
spi-cpol: true
@@ -96,8 +94,6 @@ properties:
- DIO3
- DIO4
-additionalProperties: false
-
required:
- compatible
- reg
@@ -106,6 +102,11 @@ required:
- spi-cpol
- spi-max-frequency
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 6e73cd889b5c..a0760382548d 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -46,13 +46,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
new file mode 100644
index 000000000000..e0d06db161a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BNO055
+
+maintainers:
+ - Andrea Merello <andrea.merello@iit.it>
+
+description: |
+ Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and
+ internal MCU for sensor fusion
+ https://www.bosch-sensortec.com/products/smart-sensors/bno055/
+
+properties:
+ compatible:
+ enum:
+ - bosch,bno055
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ imu {
+ compatible = "bosch,bno055";
+ reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+ clocks = <&imu_clk>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imu@28 {
+ compatible = "bosch,bno055";
+ reg = <0x28>;
+ reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+ clocks = <&imu_clk>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 4c1c083d0e92..488349755c99 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -47,7 +47,6 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
- spi-max-frequency: true
spi-cpha: true
spi-cpol: true
@@ -56,7 +55,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 3ebc6526d82d..ec64d7877fe5 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -40,8 +40,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -54,6 +52,7 @@ properties:
These devices also support an auxiliary i2c bus via an i2c-gate.
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
not:
properties:
@@ -67,7 +66,7 @@ allOf:
properties:
i2c-gate: false
-additionalProperties: false
+unevaluatedProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 0203b83b8587..24416b59b782 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -36,13 +36,14 @@ properties:
drive-open-drain:
type: boolean
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index 5d4839f00898..fe1e02e5d7b3 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -35,6 +35,9 @@ properties:
- items:
- const: st,asm330lhhx
- const: st,lsm6dsr
+ - items:
+ - const: st,lsm6dstx
+ - const: st,lsm6dst
reg:
maxItems: 1
@@ -45,8 +48,6 @@ properties:
description:
Supports up to 2 interrupt lines via the INT1 and INT2 pins.
- spi-max-frequency: true
-
vdd-supply:
description: if defined provides VDD power to the sensor.
@@ -81,12 +82,15 @@ properties:
wakeup-source:
$ref: /schemas/types.yaml#/definitions/flag
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
new file mode 100644
index 000000000000..7de1b0e721ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTRF216A Ambient Light Sensor
+
+maintainers:
+ - Shreeya Patel <shreeya.patel@collabora.com>
+
+description:
+ Ambient light sensing with an i2c interface.
+
+properties:
+ compatible:
+ const: liteon,ltrf216a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@53 {
+ compatible = "liteon,ltrf216a";
+ reg = <0x53>;
+ vdd-supply = <&vdd_regulator>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
index 567697d996ec..87e88f2a9908 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
@@ -25,14 +25,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
index 32e92bced81f..896fe0b5edcc 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
@@ -80,14 +80,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index be2be4b556db..1f9fe15b4b3c 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: All Sensors DLH series low voltage digital pressure sensors
maintainers:
- - Tomislav Denis <tomislav.denis@avl.com>
+ - Jonathan Cameron <jic23@kernel.org>
description: |
Bindings for the All Sensors DLH series pressure sensors.
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 49257f9251e8..72cd2c2d3f17 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
+title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors
maintainers:
- Andreas Klinger <ak@it-klinger.de>
@@ -16,6 +16,7 @@ description: |
https://www.bosch-sensortec.com/bst/products/all_products/bmp180
https://www.bosch-sensortec.com/bst/products/all_products/bmp280
https://www.bosch-sensortec.com/bst/products/all_products/bme280
+ https://www.bosch-sensortec.com/bst/products/all_products/bmp380
properties:
compatible:
@@ -24,6 +25,7 @@ properties:
- bosch,bmp180
- bosch,bmp280
- bosch,bme280
+ - bosch,bmp380
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
index a88b3b14d6bd..dd2ae2bd1ad7 100644
--- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
+++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
@@ -40,10 +40,6 @@ properties:
description:
Reset the sensorhub.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
@@ -52,6 +48,11 @@ required:
- mcu-ap-gpios
- mcu-reset-gpios
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
index fcb2902683c7..250439b13152 100644
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -73,6 +73,7 @@ properties:
- description: STMicroelectronics Pressure Sensors
enum:
- st,lps001wp-press
+ - st,lps22df
- st,lps22hb-press
- st,lps22hh
- st,lps25h-press
@@ -141,6 +142,7 @@ allOf:
- st,lis2mdl
- st,lis3l02dq
- st,lis3lv02dl-accel
+ - st,lps22df
- st,lps22hb-press
- st,lps22hh
- st,lps25h-press
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
index 9969bac66aa1..0805ed7e2113 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
@@ -32,7 +32,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
required:
@@ -40,6 +39,7 @@ required:
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -53,7 +53,7 @@ allOf:
properties:
spi-cpha: false
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
index 873b34766676..228a94165487 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -19,7 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
thermocouple-type:
@@ -34,7 +33,10 @@ required:
- reg
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index aafb33b16549..a2823ed6867b 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -25,7 +25,6 @@ properties:
enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
type: boolean
- spi-max-frequency: true
spi-cpha: true
required:
@@ -33,7 +32,10 @@ required:
- reg
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
index b547ddcd544a..4a55e7f25ae7 100644
--- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
@@ -35,6 +35,9 @@ properties:
maxItems: 1
description: Default is 0x3a, but can be reprogrammed.
+ vdd-supply:
+ description: provide VDD power to the sensor.
+
required:
- compatible
- reg
@@ -50,6 +53,7 @@ examples:
temp-sensor@3a {
compatible = "melexis,mlx90632";
reg = <0x3a>;
+ vdd-supply = <&ldo4_reg>;
};
};
...
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
index b5a1109f2ee1..75e0a516e59a 100644
--- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -30,6 +30,7 @@ properties:
- mediatek,mt8173-efuse
- mediatek,mt8183-efuse
- mediatek,mt8186-efuse
+ - mediatek,mt8188-efuse
- mediatek,mt8192-efuse
- mediatek,mt8195-efuse
- mediatek,mt8516-efuse
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
new file mode 100644
index 000000000000..f97c6beb4766
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN9662 OTP Controller (OTPC)
+
+maintainers:
+ - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+ OTP controller drives a NVMEM memory where system specific data
+ (e.g. hardware configuration settings, chip identifiers) or
+ user specific data could be stored.
+
+allOf:
+ - $ref: nvmem.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: microchip,lan9668-otpc
+ - const: microchip,lan9662-otpc
+ - enum:
+ - microchip,lan9662-otpc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ otpc: otp@e0021000 {
+ compatible = "microchip,lan9662-otpc";
+ reg = <0xe0021000 0x300>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index dede8892ee01..2eab2f46cb65 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -18,6 +18,7 @@ properties:
- enum:
- qcom,apq8064-qfprom
- qcom,apq8084-qfprom
+ - qcom,ipq8064-qfprom
- qcom,msm8974-qfprom
- qcom,msm8916-qfprom
- qcom,msm8996-qfprom
@@ -25,7 +26,9 @@ properties:
- qcom,qcs404-qfprom
- qcom,sc7180-qfprom
- qcom,sc7280-qfprom
+ - qcom,sdm630-qfprom
- qcom,sdm845-qfprom
+ - qcom,sm6115-qfprom
- const: qcom,qfprom
reg:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 1faea7d315c0..48b65069e6f2 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -779,6 +779,8 @@ patternProperties:
description: MELFAS Inc.
"^mellanox,.*":
description: Mellanox Technologies
+ "^memsensing,.*":
+ description: MEMSensing Microsystems Co., Ltd.
"^memsic,.*":
description: MEMSIC Inc.
"^menlo,.*":
diff --git a/Documentation/iio/bno055.rst b/Documentation/iio/bno055.rst
new file mode 100644
index 000000000000..9a489a79d8f5
--- /dev/null
+++ b/Documentation/iio/bno055.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+BNO055 driver
+==============================
+
+1. Overview
+===========
+
+This driver supports Bosch BNO055 IMUs (on both serial and I2C busses).
+
+Accelerometer, magnetometer and gyroscope measures are always provided.
+When "fusion_enable" sysfs attribute is set to 1, orientation (both Euler
+angles and quaternion), linear velocity and gravity vector are also
+provided, but some sensor settings (e.g. low pass filtering and range)
+became locked (the IMU firmware controls them).
+
+This driver supports also IIO buffers.
+
+2. Calibration
+==============
+
+The IMU continuously performs an autocalibration procedure if (and only if)
+operating in fusion mode. The magnetometer autocalibration can however be
+disabled writing 0 in the sysfs in_magn_calibration_fast_enable attribute.
+
+The driver provides access to autocalibration flags (i.e. you can known if
+the IMU has successfully autocalibrated) and to the calibration data blob.
+
+The user can save this blob in a firmware file (i.e. in /lib/firmware) that
+the driver looks for at probe time. If found, then the IMU is initialized
+with this calibration data. This saves the user from performing the
+calibration procedure every time (which consist of moving the IMU in
+various way).
+
+The driver looks for calibration data file using two different names: first
+a file whose name is suffixed with the IMU unique ID (exposed in sysfs as
+serial_number) is searched for; this is useful when there is more than one
+IMU instance. If this file is not found, then a "generic" calibration file
+is searched for (which can be used when only one IMU is present, without
+struggling with fancy names, that change on each device).
+
+Valid calibration file names would be e.g.
+ bno055-caldata-0e7c26a33541515120204a35342b04ff.dat
+ bno055-caldata.dat
+
+In non-fusion mode the IIO 'offset' attributes provide access to the
+offsets from calibration data (if any), so that the user can apply them to
+the accel, angvel and magn IIO attributes. In fusion mode they are not
+needed (the IMU firmware internally applies those corrections) and they
+read as zero.
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 58b7a4ebac51..1b7292c58cd0 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -10,3 +10,5 @@ Industrial I/O
iio_configfs
ep93xx_adc
+
+ bno055
diff --git a/Documentation/trace/coresight/coresight-cpu-debug.rst b/Documentation/trace/coresight/coresight-cpu-debug.rst
index 993dd294b81b..836b35532667 100644
--- a/Documentation/trace/coresight/coresight-cpu-debug.rst
+++ b/Documentation/trace/coresight/coresight-cpu-debug.rst
@@ -117,7 +117,8 @@ divide into below cases:
Device Tree Bindings
--------------------
-See Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt for details.
+See Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml for
+details.
How to use the module
diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
index fb7578fd9372..70e34b8c81c1 100644
--- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
+++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
@@ -71,6 +71,20 @@ the ‘TRC’ prefix.
----
+:File: ``ts_source`` (ro)
+:Trace Registers: None.
+:Notes:
+ When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for trace session. Otherwise -1
+ indicates an unknown time source. Check trcidr0.tssize to see if a global timestamp is
+ available.
+
+:Example:
+ ``$> cat ts_source``
+
+ ``$> 1``
+
+----
+
:File: ``addr_idx`` (rw)
:Trace Registers: None.
:Notes:
diff --git a/Documentation/trace/hisi-ptt.rst b/Documentation/trace/hisi-ptt.rst
new file mode 100644
index 000000000000..4f87d8e21065
--- /dev/null
+++ b/Documentation/trace/hisi-ptt.rst
@@ -0,0 +1,298 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+HiSilicon PCIe Tune and Trace device
+======================================
+
+Introduction
+============
+
+HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex
+integrated Endpoint (RCiEP) device, providing the capability
+to dynamically monitor and tune the PCIe link's events (tune),
+and trace the TLP headers (trace). The two functions are independent,
+but is recommended to use them together to analyze and enhance the
+PCIe link's performance.
+
+On Kunpeng 930 SoC, the PCIe Root Complex is composed of several
+PCIe cores. Each PCIe core includes several Root Ports and a PTT
+RCiEP, like below. The PTT device is capable of tuning and
+tracing the links of the PCIe core.
+::
+
+ +--------------Core 0-------+
+ | | [ PTT ] |
+ | | [Root Port]---[Endpoint]
+ | | [Root Port]---[Endpoint]
+ | | [Root Port]---[Endpoint]
+ Root Complex |------Core 1-------+
+ | | [ PTT ] |
+ | | [Root Port]---[ Switch ]---[Endpoint]
+ | | [Root Port]---[Endpoint] `-[Endpoint]
+ | | [Root Port]---[Endpoint]
+ +---------------------------+
+
+The PTT device driver registers one PMU device for each PTT device.
+The name of each PTT device is composed of 'hisi_ptt' prefix with
+the id of the SICL and the Core where it locates. The Kunpeng 930
+SoC encapsulates multiple CPU dies (SCCL, Super CPU Cluster) and
+IO dies (SICL, Super I/O Cluster), where there's one PCIe Root
+Complex for each SICL.
+::
+
+ /sys/devices/hisi_ptt<sicl_id>_<core_id>
+
+Tune
+====
+
+PTT tune is designed for monitoring and adjusting PCIe link parameters (events).
+Currently we support events in 2 classes. The scope of the events
+covers the PCIe core to which the PTT device belongs.
+
+Each event is presented as a file under $(PTT PMU dir)/tune, and
+a simple open/read/write/close cycle will be used to tune the event.
+::
+
+ $ cd /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+ $ ls
+ qos_tx_cpl qos_tx_np qos_tx_p
+ tx_path_rx_req_alloc_buf_level
+ tx_path_tx_req_alloc_buf_level
+ $ cat qos_tx_dp
+ 1
+ $ echo 2 > qos_tx_dp
+ $ cat qos_tx_dp
+ 2
+
+Current value (numerical value) of the event can be simply read
+from the file, and the desired value written to the file to tune.
+
+1. Tx Path QoS Control
+------------------------
+
+The following files are provided to tune the QoS of the tx path of
+the PCIe core.
+
+- qos_tx_cpl: weight of Tx completion TLPs
+- qos_tx_np: weight of Tx non-posted TLPs
+- qos_tx_p: weight of Tx posted TLPs
+
+The weight influences the proportion of certain packets on the PCIe link.
+For example, for the storage scenario, increase the proportion
+of the completion packets on the link to enhance the performance as
+more completions are consumed.
+
+The available tune data of these events is [0, 1, 2].
+Writing a negative value will return an error, and out of range
+values will be converted to 2. Note that the event value just
+indicates a probable level, but is not precise.
+
+2. Tx Path Buffer Control
+-------------------------
+
+Following files are provided to tune the buffer of tx path of the PCIe core.
+
+- rx_alloc_buf_level: watermark of Rx requested
+- tx_alloc_buf_level: watermark of Tx requested
+
+These events influence the watermark of the buffer allocated for each
+type. Rx means the inbound while Tx means outbound. The packets will
+be stored in the buffer first and then transmitted either when the
+watermark reached or when timed out. For a busy direction, you should
+increase the related buffer watermark to avoid frequently posting and
+thus enhance the performance. In most cases just keep the default value.
+
+The available tune data of above events is [0, 1, 2].
+Writing a negative value will return an error, and out of range
+values will be converted to 2. Note that the event value just
+indicates a probable level, but is not precise.
+
+Trace
+=====
+
+PTT trace is designed for dumping the TLP headers to the memory, which
+can be used to analyze the transactions and usage condition of the PCIe
+Link. You can choose to filter the traced headers by either Requester ID,
+or those downstream of a set of Root Ports on the same core of the PTT
+device. It's also supported to trace the headers of certain type and of
+certain direction.
+
+You can use the perf command `perf record` to set the parameters, start
+trace and get the data. It's also supported to decode the trace
+data with `perf report`. The control parameters for trace is inputted
+as event code for each events, which will be further illustrated later.
+An example usage is like
+::
+
+ $ perf record -e hisi_ptt0_2/filter=0x80001,type=1,direction=1,
+ format=1/ -- sleep 5
+
+This will trace the TLP headers downstream root port 0000:00:10.1 (event
+code for event 'filter' is 0x80001) with type of posted TLP requests,
+direction of inbound and traced data format of 8DW.
+
+1. Filter
+---------
+
+The TLP headers to trace can be filtered by the Root Ports or the Requester ID
+of the Endpoint, which are located on the same core of the PTT device. You can
+set the filter by specifying the `filter` parameter which is required to start
+the trace. The parameter value is 20 bit. Bit 19 indicates the filter type.
+1 for Root Port filter and 0 for Requester filter. Bit[15:0] indicates the
+filter value. The value for a Root Port is a mask of the core port id which is
+calculated from its PCI Slot ID as (slotid & 7) * 2. The value for a Requester
+is the Requester ID (Device ID of the PCIe function). Bit[18:16] is currently
+reserved for extension.
+
+For example, if the desired filter is Endpoint function 0000:01:00.1 the filter
+value will be 0x00101. If the desired filter is Root Port 0000:00:10.0 then
+then filter value is calculated as 0x80001.
+
+Note that multiple Root Ports can be specified at one time, but only one
+Endpoint function can be specified in one trace. Specifying both Root Port
+and function at the same time is not supported. Driver maintains a list of
+available filters and will check the invalid inputs.
+
+Currently the available filters are detected in driver's probe. If the supported
+devices are removed/added after probe, you may need to reload the driver to update
+the filters.
+
+2. Type
+-------
+
+You can trace the TLP headers of certain types by specifying the `type`
+parameter, which is required to start the trace. The parameter value is
+8 bit. Current supported types and related values are shown below:
+
+- 8'b00000001: posted requests (P)
+- 8'b00000010: non-posted requests (NP)
+- 8'b00000100: completions (CPL)
+
+You can specify multiple types when tracing inbound TLP headers, but can only
+specify one when tracing outbound TLP headers.
+
+3. Direction
+------------
+
+You can trace the TLP headers from certain direction, which is relative
+to the Root Port or the PCIe core, by specifying the `direction` parameter.
+This is optional and the default parameter is inbound. The parameter value
+is 4 bit. When the desired format is 4DW, directions and related values
+supported are shown below:
+
+- 4'b0000: inbound TLPs (P, NP, CPL)
+- 4'b0001: outbound TLPs (P, NP, CPL)
+- 4'b0010: outbound TLPs (P, NP, CPL) and inbound TLPs (P, NP, CPL B)
+- 4'b0011: outbound TLPs (P, NP, CPL) and inbound TLPs (CPL A)
+
+When the desired format is 8DW, directions and related values supported are
+shown below:
+
+- 4'b0000: reserved
+- 4'b0001: outbound TLPs (P, NP, CPL)
+- 4'b0010: inbound TLPs (P, NP, CPL B)
+- 4'b0011: inbound TLPs (CPL A)
+
+Inbound completions are classified into two types:
+
+- completion A (CPL A): completion of CHI/DMA/Native non-posted requests, except for CPL B
+- completion B (CPL B): completion of DMA remote2local and P2P non-posted requests
+
+4. Format
+--------------
+
+You can change the format of the traced TLP headers by specifying the
+`format` parameter. The default format is 4DW. The parameter value is 4 bit.
+Current supported formats and related values are shown below:
+
+- 4'b0000: 4DW length per TLP header
+- 4'b0001: 8DW length per TLP header
+
+The traced TLP header format is different from the PCIe standard.
+
+When using the 8DW data format, the entire TLP header is logged
+(Header DW0-3 shown below). For example, the TLP header for Memory
+Reads with 64-bit addresses is shown in PCIe r5.0, Figure 2-17;
+the header for Configuration Requests is shown in Figure 2.20, etc.
+
+In addition, 8DW trace buffer entries contain a timestamp and
+possibly a prefix for a PASID TLP prefix (see Figure 6-20, PCIe r5.0).
+Otherwise this field will be all 0.
+
+The bit[31:11] of DW0 is always 0x1fffff, which can be
+used to distinguish the data format. 8DW format is like
+::
+
+ bits [ 31:11 ][ 10:0 ]
+ |---------------------------------------|-------------------|
+ DW0 [ 0x1fffff ][ Reserved (0x7ff) ]
+ DW1 [ Prefix ]
+ DW2 [ Header DW0 ]
+ DW3 [ Header DW1 ]
+ DW4 [ Header DW2 ]
+ DW5 [ Header DW3 ]
+ DW6 [ Reserved (0x0) ]
+ DW7 [ Time ]
+
+When using the 4DW data format, DW0 of the trace buffer entry
+contains selected fields of DW0 of the TLP, together with a
+timestamp. DW1-DW3 of the trace buffer entry contain DW1-DW3
+directly from the TLP header.
+
+4DW format is like
+::
+
+ bits [31:30] [ 29:25 ][24][23][22][21][ 20:11 ][ 10:0 ]
+ |-----|---------|---|---|---|---|-------------|-------------|
+ DW0 [ Fmt ][ Type ][T9][T8][TH][SO][ Length ][ Time ]
+ DW1 [ Header DW1 ]
+ DW2 [ Header DW2 ]
+ DW3 [ Header DW3 ]
+
+5. Memory Management
+--------------------
+
+The traced TLP headers will be written to the memory allocated
+by the driver. The hardware accepts 4 DMA address with same size,
+and writes the buffer sequentially like below. If DMA addr 3 is
+finished and the trace is still on, it will return to addr 0.
+::
+
+ +->[DMA addr 0]->[DMA addr 1]->[DMA addr 2]->[DMA addr 3]-+
+ +---------------------------------------------------------+
+
+Driver will allocate each DMA buffer of 4MiB. The finished buffer
+will be copied to the perf AUX buffer allocated by the perf core.
+Once the AUX buffer is full while the trace is still on, driver
+will commit the AUX buffer first and then apply for a new one with
+the same size. The size of AUX buffer is default to 16MiB. User can
+adjust the size by specifying the `-m` parameter of the perf command.
+
+6. Decoding
+-----------
+
+You can decode the traced data with `perf report -D` command (currently
+only support to dump the raw trace data). The traced data will be decoded
+according to the format described previously (take 8DW as an example):
+::
+
+ [...perf headers and other information]
+ . ... HISI PTT data: size 4194304 bytes
+ . 00000000: 00 00 00 00 Prefix
+ . 00000004: 01 00 00 60 Header DW0
+ . 00000008: 0f 1e 00 01 Header DW1
+ . 0000000c: 04 00 00 00 Header DW2
+ . 00000010: 40 00 81 02 Header DW3
+ . 00000014: 33 c0 04 00 Time
+ . 00000020: 00 00 00 00 Prefix
+ . 00000024: 01 00 00 60 Header DW0
+ . 00000028: 0f 1e 00 01 Header DW1
+ . 0000002c: 04 00 00 00 Header DW2
+ . 00000030: 40 00 81 02 Header DW3
+ . 00000034: 02 00 00 00 Time
+ . 00000040: 00 00 00 00 Prefix
+ . 00000044: 01 00 00 60 Header DW0
+ . 00000048: 0f 1e 00 01 Header DW1
+ . 0000004c: 04 00 00 00 Header DW2
+ . 00000050: 40 00 81 02 Header DW3
+ [...]
diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index 2d73e8697523..ea25a9220f92 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -33,3 +33,4 @@ Linux Tracing Technologies
coresight/index
user_events
rv/index
+ hisi-ptt