diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/clock/at91-clock.txt | 35 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt | 43 |
2 files changed, 78 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index 51c259a92d02..d0adbf5ae144 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -91,6 +91,9 @@ Required properties: at91 audio pll output on AUDIOPLLCLK that feeds the PMC and can be used by peripheral clock or generic clock + "atmel,sama5d2-clk-i2s-mux" (under pmc node): + at91 I2S clock source selection + Required properties for SCKC node: - reg : defines the IO memory reserved for the SCKC. - #size-cells : shall be 0 (reg is used to encode clk id). @@ -507,3 +510,35 @@ For example: atmel,clk-output-range = <0 83000000>; }; }; + +Required properties for I2S mux clocks: +- #size-cells : shall be 0 (reg is used to encode I2S bus id). +- #address-cells : shall be 1 (reg is used to encode I2S bus id). +- name: device tree node describing a specific mux clock. + * #clock-cells : from common clock binding; shall be set to 0. + * clocks : shall be the mux clock parent phandles; shall be 2 phandles: + peripheral and generated clock; the first phandle shall belong to the + peripheral clock and the second one shall belong to the generated + clock; "clock-indices" property can be user to specify + the correct order. + * reg: I2S bus id of the corresponding mux clock. + e.g. reg = <0>; for i2s0, reg = <1>; for i2s1 + +For example: + i2s_clkmux { + compatible = "atmel,sama5d2-clk-i2s-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2s0muxck: i2s0_muxclk { + clocks = <&i2s0_clk>, <&i2s0_gclk>; + #clock-cells = <0>; + reg = <0>; + }; + + i2s1muxck: i2s1_muxclk { + clocks = <&i2s1_clk>, <&i2s1_gclk>; + #clock-cells = <0>; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt new file mode 100644 index 000000000000..d60b99756bb9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt @@ -0,0 +1,43 @@ +* Renesas R9A06G032 SYSCTRL + +Required Properties: + + - compatible: Must be: + - "renesas,r9a06g032-sysctrl" + - reg: Base address and length of the SYSCTRL IO block. + - #clock-cells: Must be 1 + - clocks: References to the parent clocks: + - external 40mhz crystal. + - external (optional) 32.768khz + - external (optional) jtag input + - external (optional) RGMII_REFCLK + - clock-names: Must be: + clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + +Examples +-------- + + - SYSCTRL node: + + sysctrl: system-controller@4000c000 { + compatible = "renesas,r9a06g032-sysctrl"; + reg = <0x4000c000 0x1000>; + #clock-cells = <1>; + + clocks = <&ext_mclk>, <&ext_rtc_clk>, + <&ext_jtag_clk>, <&ext_rgmii_ref>; + clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + }; + + - Other nodes can use the clocks provided by SYSCTRL as in: + + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + uart0: serial@40060000 { + compatible = "snps,dw-apb-uart"; + reg = <0x40060000 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART0>; + clock-names = "baudclk"; + }; |