diff options
Diffstat (limited to 'Documentation')
745 files changed, 15368 insertions, 5681 deletions
diff --git a/Documentation/ABI/testing/debugfs-driver-qat b/Documentation/ABI/testing/debugfs-driver-qat new file mode 100644 index 000000000000..6731ffacc5f0 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-driver-qat @@ -0,0 +1,61 @@ +What: /sys/kernel/debug/qat_<device>_<BDF>/qat/fw_counters +Date: November 2023 +KernelVersion: 6.6 +Contact: qat-linux@intel.com +Description: (RO) Read returns the number of requests sent to the FW and the number of responses + received from the FW for each Acceleration Engine + Reported firmware counters:: + + <N>: Number of requests sent from Acceleration Engine N to FW and responses + Acceleration Engine N received from FW + +What: /sys/kernel/debug/qat_<device>_<BDF>/heartbeat/config +Date: November 2023 +KernelVersion: 6.6 +Contact: qat-linux@intel.com +Description: (RW) Read returns value of the Heartbeat update period. + Write to the file changes this period value. + + This period should reflect planned polling interval of device + health status. High frequency Heartbeat monitoring wastes CPU cycles + but minimizes the customer’s system downtime. Also, if there are + large service requests that take some time to complete, high frequency + Heartbeat monitoring could result in false reports of unresponsiveness + and in those cases, period needs to be increased. + + This parameter is effective only for c3xxx, c62x, dh895xcc devices. + 4xxx has this value internally fixed to 200ms. + + Default value is set to 500. Minimal allowed value is 200. + All values are expressed in milliseconds. + +What: /sys/kernel/debug/qat_<device>_<BDF>/heartbeat/queries_failed +Date: November 2023 +KernelVersion: 6.6 +Contact: qat-linux@intel.com +Description: (RO) Read returns the number of times the device became unresponsive. + + Attribute returns value of the counter which is incremented when + status query results negative. + +What: /sys/kernel/debug/qat_<device>_<BDF>/heartbeat/queries_sent +Date: November 2023 +KernelVersion: 6.6 +Contact: qat-linux@intel.com +Description: (RO) Read returns the number of times the control process checked + if the device is responsive. + + Attribute returns value of the counter which is incremented on + every status query. + +What: /sys/kernel/debug/qat_<device>_<BDF>/heartbeat/status +Date: November 2023 +KernelVersion: 6.6 +Contact: qat-linux@intel.com +Description: (RO) Read returns the device health status. + + Returns 0 when device is healthy or -1 when is unresponsive + or the query failed to send. + + The driver does not monitor for Heartbeat. It is left for a user + to poll the status periodically. diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 49db0ff288e5..c2385183826c 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -57,9 +57,9 @@ Description: stored in security.ima xattr. Requires specifying "digest_type=verity" first.) - appraise_flag:= [check_blacklist] - Currently, blacklist check is only for files signed with appended - signature. + appraise_flag:= [check_blacklist] (deprecated) + Setting the check_blacklist flag is no longer necessary. + All appraisal functions set it by default. digest_type:= verity Require fs-verity's file digest instead of the regular IMA file hash. diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 6350dd82b9a9..087f762ebfd5 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -82,7 +82,12 @@ Description: whether it resides in persistent capacity, volatile capacity, or the LSA, is made permanently unavailable by whatever means is appropriate for the media type. This functionality requires - the device to be not be actively decoding any HPA ranges. + the device to be disabled, that is, not actively decoding any + HPA ranges. This permits avoiding explicit global CPU cache + management, relying instead for it to be done when a region + transitions between software programmed and hardware committed + states. If this file is not present, then there is no hardware + support for the operation. What /sys/bus/cxl/devices/memX/security/erase @@ -92,7 +97,13 @@ Contact: linux-cxl@vger.kernel.org Description: (WO) Write a boolean 'true' string value to this attribute to secure erase user data by changing the media encryption keys for - all user data areas of the device. + all user data areas of the device. This functionality requires + the device to be disabled, that is, not actively decoding any + HPA ranges. This permits avoiding explicit global CPU cache + management, relying instead for it to be done when a region + transitions between software programmed and hardware committed + states. If this file is not present, then there is no hardware + support for the operation. What: /sys/bus/cxl/devices/memX/firmware/ diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index 78b62a23b14a..f6d9d72ce77b 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -13,7 +13,7 @@ Description: Specifies the duration of the LED blink in milliseconds. Defaults to 50 ms. - With hw_control ON, the interval value MUST be set to the + When offloaded is true, the interval value MUST be set to the default value and cannot be changed. Trying to set any value in this specific mode will return an EINVAL error. @@ -44,8 +44,8 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal transmission. - With hw_control ON, the blink interval is controlled by hardware - and won't reflect the value set in interval. + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. What: /sys/class/leds/<led>/rx Date: Dec 2017 @@ -59,21 +59,21 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal reception. - With hw_control ON, the blink interval is controlled by hardware - and won't reflect the value set in interval. + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. -What: /sys/class/leds/<led>/hw_control +What: /sys/class/leds/<led>/offloaded Date: Jun 2023 KernelVersion: 6.5 Contact: linux-leds@vger.kernel.org Description: - Communicate whether the LED trigger modes are driven by hardware - or software fallback is used. + Communicate whether the LED trigger modes are offloaded to + hardware or whether software fallback is used. If 0, the LED is using software fallback to blink. - If 1, the LED is using hardware control to blink and signal the - requested modes. + If 1, the LED blinking in requested mode is offloaded to + hardware. What: /sys/class/leds/<led>/link_10 Date: Jun 2023 diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index d8b0f80b9e33..a95e0f17c35a 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -110,3 +110,11 @@ Description: link is created for memory section 9 on node0. /sys/devices/system/node/node0/memory9 -> ../../memory/memory9 + +What: /sys/devices/system/memory/crash_hotplug +Date: Aug 2023 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: + (RO) indicates whether or not the kernel directly supports + modifying the crash elfcorehdr for memory hot un/plug and/or + on/offline changes. diff --git a/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs b/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs new file mode 100644 index 000000000000..fdb4e36310fb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs @@ -0,0 +1,81 @@ +What: /sys/devices/platform/HISI04Bx:00/chipX/all_linked +What: /sys/devices/platform/HISI04Bx:00/chipX/linked_full_lane +What: /sys/devices/platform/HISI04Bx:00/chipX/crc_err_cnt +Date: November 2023 +KernelVersion: 6.6 +Contact: Huisong Li <lihuisong@huawei.org> +Description: + The /sys/devices/platform/HISI04Bx:00/chipX/ directory + contains read-only attributes exposing some summarization + information of all HCCS ports under a specified chip. + The X in 'chipX' indicates the Xth chip on platform. + + There are following attributes in this directory: + + ================= ==== ========================================= + all_linked: (RO) if all enabled ports on this chip are + linked (bool). + linked_full_lane: (RO) if all linked ports on this chip are full + lane (bool). + crc_err_cnt: (RO) total CRC err count for all ports on this + chip. + ================= ==== ========================================= + +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/all_linked +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/linked_full_lane +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/crc_err_cnt +Date: November 2023 +KernelVersion: 6.6 +Contact: Huisong Li <lihuisong@huawei.org> +Description: + The /sys/devices/platform/HISI04Bx:00/chipX/dieY/ directory + contains read-only attributes exposing some summarization + information of all HCCS ports under a specified die. + The Y in 'dieY' indicates the hardware id of the die on chip who + has chip id X. + + There are following attributes in this directory: + + ================= ==== ========================================= + all_linked: (RO) if all enabled ports on this die are + linked (bool). + linked_full_lane: (RO) if all linked ports on this die are full + lane (bool). + crc_err_cnt: (RO) total CRC err count for all ports on this + die. + ================= ==== ========================================= + +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/type +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/lane_mode +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/enable +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/cur_lane_num +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/link_fsm +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/lane_mask +What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/crc_err_cnt +Date: November 2023 +KernelVersion: 6.6 +Contact: Huisong Li <lihuisong@huawei.org> +Description: + The /sys/devices/platform/HISI04Bx/chipX/dieX/hccsN/ directory + contains read-only attributes exposing information about + a HCCS port. The N value in 'hccsN' indicates this port id. + The X in 'chipX' indicates the ID of the chip to which the + HCCS port belongs. For example, X ranges from to 'n - 1' if the + chip number on platform is n. + The Y in 'dieY' indicates the hardware id of the die to which + the hccs port belongs. + Note: type, lane_mode and enable are fixed attributes on running + platform. + + The HCCS port have the following attributes: + + ============= ==== ============================================= + type: (RO) port type (string), e.g. HCCS-v1 -> H32 + lane_mode: (RO) the lane mode of this port (string), e.g. x8 + enable: (RO) indicate if this port is enabled (bool). + cur_lane_num: (RO) current lane number of this port. + link_fsm: (RO) link finite state machine of this port. + lane_mask: (RO) current lane mask of this port, every bit + indicates a lane. + crc_err_cnt: (RO) CRC err count on this port. + ============= ==== ============================================= diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index ecd585ca2d50..7ecd5c8161a6 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -513,17 +513,18 @@ Description: information about CPUs heterogeneity. cpu_capacity: capacity of cpuX. What: /sys/devices/system/cpu/vulnerabilities + /sys/devices/system/cpu/vulnerabilities/gather_data_sampling + /sys/devices/system/cpu/vulnerabilities/itlb_multihit + /sys/devices/system/cpu/vulnerabilities/l1tf + /sys/devices/system/cpu/vulnerabilities/mds /sys/devices/system/cpu/vulnerabilities/meltdown + /sys/devices/system/cpu/vulnerabilities/mmio_stale_data + /sys/devices/system/cpu/vulnerabilities/retbleed + /sys/devices/system/cpu/vulnerabilities/spec_store_bypass /sys/devices/system/cpu/vulnerabilities/spectre_v1 /sys/devices/system/cpu/vulnerabilities/spectre_v2 - /sys/devices/system/cpu/vulnerabilities/spec_store_bypass - /sys/devices/system/cpu/vulnerabilities/l1tf - /sys/devices/system/cpu/vulnerabilities/mds /sys/devices/system/cpu/vulnerabilities/srbds /sys/devices/system/cpu/vulnerabilities/tsx_async_abort - /sys/devices/system/cpu/vulnerabilities/itlb_multihit - /sys/devices/system/cpu/vulnerabilities/mmio_stale_data - /sys/devices/system/cpu/vulnerabilities/retbleed Date: January 2018 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> Description: Information about CPU vulnerabilities @@ -555,6 +556,7 @@ Description: Control Symmetric Multi Threading (SMT) ================ ========================================= "on" SMT is enabled "off" SMT is disabled + "<N>" SMT is enabled with N threads per core. "forceoff" SMT is force disabled. Cannot be changed. "notsupported" SMT is not supported by the CPU "notimplemented" SMT runtime toggling is not @@ -686,3 +688,11 @@ Description: (RO) the list of CPUs that are isolated and don't participate in load balancing. These CPUs are set by boot parameter "isolcpus=". + +What: /sys/devices/system/cpu/crash_hotplug +Date: Aug 2023 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: + (RO) indicates whether or not the kernel directly supports + modifying the crash elfcorehdr for CPU hot un/plug and/or + on/offline changes. diff --git a/Documentation/ABI/testing/sysfs-driver-ccp b/Documentation/ABI/testing/sysfs-driver-ccp index 7aded9b75553..ee6b787eee7a 100644 --- a/Documentation/ABI/testing/sysfs-driver-ccp +++ b/Documentation/ABI/testing/sysfs-driver-ccp @@ -85,3 +85,21 @@ Description: Possible values: 0: Not enforced 1: Enforced + +What: /sys/bus/pci/devices/<BDF>/bootloader_version +Date: June 2023 +KernelVersion: 6.4 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/bootloader_version + file reports the firmware version of the AMD AGESA + bootloader. + +What: /sys/bus/pci/devices/<BDF>/tee_version +Date: June 2023 +KernelVersion: 6.4 +Contact: mario.limonciello@amd.com +Description: + The /sys/bus/pci/devices/<BDF>/tee_version + file reports the firmware version of the AMD Trusted + Execution Environment (TEE). diff --git a/Documentation/ABI/testing/sysfs-driver-chromeos-acpi b/Documentation/ABI/testing/sysfs-driver-chromeos-acpi index c308926e1568..d46b1c85840d 100644 --- a/Documentation/ABI/testing/sysfs-driver-chromeos-acpi +++ b/Documentation/ABI/testing/sysfs-driver-chromeos-acpi @@ -1,4 +1,5 @@ What: /sys/bus/platform/devices/GGL0001:*/BINF.2 + /sys/bus/platform/devices/GOOG0016:*/BINF.2 Date: May 2022 KernelVersion: 5.19 Description: @@ -10,6 +11,7 @@ Description: == =============================== What: /sys/bus/platform/devices/GGL0001:*/BINF.3 + /sys/bus/platform/devices/GOOG0016:*/BINF.3 Date: May 2022 KernelVersion: 5.19 Description: @@ -23,6 +25,7 @@ Description: == ===================================== What: /sys/bus/platform/devices/GGL0001:*/CHSW + /sys/bus/platform/devices/GOOG0016:*/CHSW Date: May 2022 KernelVersion: 5.19 Description: @@ -38,6 +41,7 @@ Description: ==== =========================================== What: /sys/bus/platform/devices/GGL0001:*/FMAP + /sys/bus/platform/devices/GOOG0016:*/FMAP Date: May 2022 KernelVersion: 5.19 Description: @@ -45,6 +49,7 @@ Description: processor firmware flashmap. What: /sys/bus/platform/devices/GGL0001:*/FRID + /sys/bus/platform/devices/GOOG0016:*/FRID Date: May 2022 KernelVersion: 5.19 Description: @@ -52,6 +57,7 @@ Description: main processor firmware. What: /sys/bus/platform/devices/GGL0001:*/FWID + /sys/bus/platform/devices/GOOG0016:*/FWID Date: May 2022 KernelVersion: 5.19 Description: @@ -59,6 +65,7 @@ Description: main processor firmware. What: /sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.0 + /sys/bus/platform/devices/GOOG0016:*/GPIO.X/GPIO.0 Date: May 2022 KernelVersion: 5.19 Description: @@ -73,6 +80,7 @@ Description: =========== ================================== What: /sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.1 + /sys/bus/platform/devices/GOOG0016:*/GPIO.X/GPIO.1 Date: May 2022 KernelVersion: 5.19 Description: @@ -84,6 +92,7 @@ Description: == ======================= What: /sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.2 + /sys/bus/platform/devices/GOOG0016:*/GPIO.X/GPIO.2 Date: May 2022 KernelVersion: 5.19 Description: @@ -91,18 +100,21 @@ Description: controller. What: /sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.3 + /sys/bus/platform/devices/GOOG0016:*/GPIO.X/GPIO.3 Date: May 2022 KernelVersion: 5.19 Description: Returns name of the GPIO controller. What: /sys/bus/platform/devices/GGL0001:*/HWID + /sys/bus/platform/devices/GOOG0016:*/HWID Date: May 2022 KernelVersion: 5.19 Description: Returns hardware ID for the Chromebook. What: /sys/bus/platform/devices/GGL0001:*/MECK + /sys/bus/platform/devices/GOOG0016:*/MECK Date: May 2022 KernelVersion: 5.19 Description: @@ -113,6 +125,7 @@ Description: present, or if the firmware was unable to read the extended registers, this buffer size can be zero. What: /sys/bus/platform/devices/GGL0001:*/VBNV.0 + /sys/bus/platform/devices/GOOG0016:*/VBNV.0 Date: May 2022 KernelVersion: 5.19 Description: @@ -122,6 +135,7 @@ Description: clock data). What: /sys/bus/platform/devices/GGL0001:*/VBNV.1 + /sys/bus/platform/devices/GOOG0016:*/VBNV.1 Date: May 2022 KernelVersion: 5.19 Description: @@ -129,9 +143,10 @@ Description: storage block. What: /sys/bus/platform/devices/GGL0001:*/VDAT + /sys/bus/platform/devices/GOOG0016:*/VDAT Date: May 2022 KernelVersion: 5.19 Description: Returns the verified boot data block shared between the firmware verification step and the kernel verification step - (binary). + (hex dump). diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index d5f44fc5b9dc..e487f969a15e 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -994,7 +994,7 @@ Description: This file shows the amount of physical memory needed What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl What: /sys/bus/platform/devices/*.ufs/rpm_lvl Date: September 2014 -Contact: Subhash Jadavani <subhashj@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This entry could be used to set or show the UFS device runtime power management level. The current driver implementation supports 7 levels with next target states: @@ -1021,7 +1021,7 @@ Description: This entry could be used to set or show the UFS device What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state What: /sys/bus/platform/devices/*.ufs/rpm_target_dev_state Date: February 2018 -Contact: Subhash Jadavani <subhashj@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This entry shows the target power mode of an UFS device for the chosen runtime power management level. @@ -1030,7 +1030,7 @@ Description: This entry shows the target power mode of an UFS device What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state What: /sys/bus/platform/devices/*.ufs/rpm_target_link_state Date: February 2018 -Contact: Subhash Jadavani <subhashj@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This entry shows the target state of an UFS UIC link for the chosen runtime power management level. @@ -1039,7 +1039,7 @@ Description: This entry shows the target state of an UFS UIC link What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl What: /sys/bus/platform/devices/*.ufs/spm_lvl Date: September 2014 -Contact: Subhash Jadavani <subhashj@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This entry could be used to set or show the UFS device system power management level. The current driver implementation supports 7 levels with next target states: @@ -1066,7 +1066,7 @@ Description: This entry could be used to set or show the UFS device What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state What: /sys/bus/platform/devices/*.ufs/spm_target_dev_state Date: February 2018 -Contact: Subhash Jadavani <subhashj@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This entry shows the target power mode of an UFS device for the chosen system power management level. @@ -1075,7 +1075,7 @@ Description: This entry shows the target power mode of an UFS device What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state What: /sys/bus/platform/devices/*.ufs/spm_target_link_state Date: February 2018 -Contact: Subhash Jadavani <subhashj@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This entry shows the target state of an UFS UIC link for the chosen system power management level. @@ -1084,7 +1084,7 @@ Description: This entry shows the target state of an UFS UIC link What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable What: /sys/bus/platform/devices/*.ufs/monitor/monitor_enable Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the status of performance monitor enablement and it can be used to start/stop the monitor. When the monitor is stopped, the performance data collected is also cleared. @@ -1092,7 +1092,7 @@ Description: This file shows the status of performance monitor enablement What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size What: /sys/bus/platform/devices/*.ufs/monitor/monitor_chunk_size Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file tells the monitor to focus on requests transferring data of specific chunk size (in Bytes). 0 means any chunk size. It can only be changed when monitor is disabled. @@ -1100,7 +1100,7 @@ Description: This file tells the monitor to focus on requests transferring What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors What: /sys/bus/platform/devices/*.ufs/monitor/read_total_sectors Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows how many sectors (in 512 Bytes) have been sent from device to host after monitor gets started. @@ -1109,7 +1109,7 @@ Description: This file shows how many sectors (in 512 Bytes) have been What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy What: /sys/bus/platform/devices/*.ufs/monitor/read_total_busy Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows how long (in micro seconds) has been spent sending data from device to host after monitor gets started. @@ -1118,7 +1118,7 @@ Description: This file shows how long (in micro seconds) has been spent What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests What: /sys/bus/platform/devices/*.ufs/monitor/read_nr_requests Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows how many read requests have been sent after monitor gets started. @@ -1127,7 +1127,7 @@ Description: This file shows how many read requests have been sent after What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_max Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the maximum latency (in micro seconds) of read requests after monitor gets started. @@ -1136,7 +1136,7 @@ Description: This file shows the maximum latency (in micro seconds) of What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_min Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the minimum latency (in micro seconds) of read requests after monitor gets started. @@ -1145,7 +1145,7 @@ Description: This file shows the minimum latency (in micro seconds) of What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_avg Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the average latency (in micro seconds) of read requests after monitor gets started. @@ -1154,7 +1154,7 @@ Description: This file shows the average latency (in micro seconds) of What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_sum Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the total latency (in micro seconds) of read requests sent after monitor gets started. @@ -1163,7 +1163,7 @@ Description: This file shows the total latency (in micro seconds) of What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors What: /sys/bus/platform/devices/*.ufs/monitor/write_total_sectors Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows how many sectors (in 512 Bytes) have been sent from host to device after monitor gets started. @@ -1172,7 +1172,7 @@ Description: This file shows how many sectors (in 512 Bytes) have been sent What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy What: /sys/bus/platform/devices/*.ufs/monitor/write_total_busy Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows how long (in micro seconds) has been spent sending data from host to device after monitor gets started. @@ -1181,7 +1181,7 @@ Description: This file shows how long (in micro seconds) has been spent What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests What: /sys/bus/platform/devices/*.ufs/monitor/write_nr_requests Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows how many write requests have been sent after monitor gets started. @@ -1190,7 +1190,7 @@ Description: This file shows how many write requests have been sent after What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_max Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the maximum latency (in micro seconds) of write requests after monitor gets started. @@ -1199,7 +1199,7 @@ Description: This file shows the maximum latency (in micro seconds) of write What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_min Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the minimum latency (in micro seconds) of write requests after monitor gets started. @@ -1208,7 +1208,7 @@ Description: This file shows the minimum latency (in micro seconds) of write What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_avg Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the average latency (in micro seconds) of write requests after monitor gets started. @@ -1217,7 +1217,7 @@ Description: This file shows the average latency (in micro seconds) of write What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum Date: January 2021 -Contact: Can Guo <cang@codeaurora.org> +Contact: Can Guo <quic_cang@quicinc.com> Description: This file shows the total latency (in micro seconds) of write requests after monitor gets started. @@ -1226,7 +1226,7 @@ Description: This file shows the total latency (in micro seconds) of write What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows if preserve user-space was configured The file is read only. @@ -1234,7 +1234,7 @@ Description: This entry shows if preserve user-space was configured What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_shared_alloc_units Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the shared allocated units of WB buffer The file is read only. @@ -1242,7 +1242,7 @@ Description: This entry shows the shared allocated units of WB buffer What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_type Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the configured WB type. 0x1 for shared buffer mode. 0x0 for dedicated buffer mode. @@ -1251,7 +1251,7 @@ Description: This entry shows the configured WB type. What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_buff_cap_adj Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the total user-space decrease in shared buffer mode. The value of this parameter is 3 for TLC NAND when SLC mode @@ -1262,7 +1262,7 @@ Description: This entry shows the total user-space decrease in shared What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_alloc_units Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the Maximum total WriteBooster Buffer size which is supported by the entire device. @@ -1271,7 +1271,7 @@ Description: This entry shows the Maximum total WriteBooster Buffer size What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_wb_luns Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the maximum number of luns that can support WriteBooster. @@ -1280,7 +1280,7 @@ Description: This entry shows the maximum number of luns that can support What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_red_type Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: The supportability of user space reduction mode and preserve user space mode. 00h: WriteBooster Buffer can be configured only in @@ -1295,7 +1295,7 @@ Description: The supportability of user space reduction mode What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_wb_type Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: The supportability of WriteBooster Buffer type. === ========================================================== @@ -1310,7 +1310,7 @@ Description: The supportability of WriteBooster Buffer type. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable What: /sys/bus/platform/devices/*.ufs/flags/wb_enable Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the status of WriteBooster. == ============================ @@ -1323,7 +1323,7 @@ Description: This entry shows the status of WriteBooster. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_en Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows if flush is enabled. == ================================= @@ -1336,7 +1336,7 @@ Description: This entry shows if flush is enabled. What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8 What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_during_h8 Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: Flush WriteBooster Buffer during hibernate state. == ================================================= @@ -1351,7 +1351,7 @@ Description: Flush WriteBooster Buffer during hibernate state. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf What: /sys/bus/platform/devices/*.ufs/attributes/wb_avail_buf Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the amount of unused WriteBooster buffer available. @@ -1360,7 +1360,7 @@ Description: This entry shows the amount of unused WriteBooster buffer What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf What: /sys/bus/platform/devices/*.ufs/attributes/wb_cur_buf Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the amount of unused current buffer. The file is read only. @@ -1368,7 +1368,7 @@ Description: This entry shows the amount of unused current buffer. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status What: /sys/bus/platform/devices/*.ufs/attributes/wb_flush_status Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the flush operation status. @@ -1385,7 +1385,7 @@ Description: This entry shows the flush operation status. What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est What: /sys/bus/platform/devices/*.ufs/attributes/wb_life_time_est Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows an indication of the WriteBooster Buffer lifetime based on the amount of performed program/erase cycles @@ -1399,7 +1399,7 @@ Description: This entry shows an indication of the WriteBooster Buffer What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units Date: June 2020 -Contact: Asutosh Das <asutoshd@codeaurora.org> +Contact: Asutosh Das <quic_asutoshd@quicinc.com> Description: This entry shows the configured size of WriteBooster buffer. 0400h corresponds to 4GB. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon index 464ac5c41d7a..420b30f09cf0 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-damon +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -29,8 +29,10 @@ Description: Writing 'on' or 'off' to this file makes the kdamond starts or file updates contents of schemes stats files of the kdamond. Writing 'update_schemes_tried_regions' to the file updates contents of 'tried_regions' directory of every scheme directory - of this kdamond. Writing 'clear_schemes_tried_regions' to the - file removes contents of the 'tried_regions' directory. + of this kdamond. Writing 'update_schemes_tried_bytes' to the + file updates only '.../tried_regions/total_bytes' files of this + kdamond. Writing 'clear_schemes_tried_regions' to the file + removes contents of the 'tried_regions' directory. What: /sys/kernel/mm/damon/admin/kdamonds/<K>/pid Date: Mar 2022 @@ -269,8 +271,10 @@ What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/ Date: Dec 2022 Contact: SeongJae Park <sj@kernel.org> Description: Writing to and reading from this file sets and gets the type of - the memory of the interest. 'anon' for anonymous pages, or - 'memcg' for specific memory cgroup can be written and read. + the memory of the interest. 'anon' for anonymous pages, + 'memcg' for specific memory cgroup, 'addr' for address range + (an open-ended interval), or 'target' for DAMON monitoring + target can be written and read. What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/memcg_path Date: Dec 2022 @@ -279,6 +283,27 @@ Description: If 'memcg' is written to the 'type' file, writing to and reading from this file sets and gets the path to the memory cgroup of the interest. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/addr_start +Date: Jul 2023 +Contact: SeongJae Park <sj@kernel.org> +Description: If 'addr' is written to the 'type' file, writing to or reading + from this file sets or gets the start address of the address + range for the filter. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/addr_end +Date: Jul 2023 +Contact: SeongJae Park <sj@kernel.org> +Description: If 'addr' is written to the 'type' file, writing to or reading + from this file sets or gets the end address of the address + range for the filter. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/target_idx +Date: Dec 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: If 'target' is written to the 'type' file, writing to or + reading from this file sets or gets the index of the DAMON + monitoring target of the interest. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/matching Date: Dec 2022 Contact: SeongJae Park <sj@kernel.org> @@ -317,6 +342,13 @@ Contact: SeongJae Park <sj@kernel.org> Description: Reading this file returns the number of the exceed events of the scheme's quotas. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/tried_regions/total_bytes +Date: Jul 2023 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading this file returns the total amount of memory that + corresponding DAMON-based Operation Scheme's action has tried + to be applied. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/tried_regions/<R>/start Date: Oct 2022 Contact: SeongJae Park <sj@kernel.org> diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module index 08886367d047..62addab47d0c 100644 --- a/Documentation/ABI/testing/sysfs-module +++ b/Documentation/ABI/testing/sysfs-module @@ -60,3 +60,14 @@ Description: Module taint flags: C staging driver module E unsigned module == ===================== + +What: /sys/module/grant_table/parameters/free_per_iteration +Date: July 2023 +KernelVersion: 6.5 but backported to all supported stable branches +Contact: Xen developer discussion <xen-devel@lists.xenproject.org> +Description: Read and write number of grant entries to attempt to free per iteration. + + Note: Future versions of Xen and Linux may provide a better + interface for controlling the rate of deferred grant reclaim + or may not need it at all. +Users: Qubes OS (https://www.qubes-os.org) diff --git a/Documentation/ABI/testing/sysfs-platform-hidma b/Documentation/ABI/testing/sysfs-platform-hidma index fca40a54df59..a80aeda85ef6 100644 --- a/Documentation/ABI/testing/sysfs-platform-hidma +++ b/Documentation/ABI/testing/sysfs-platform-hidma @@ -2,7 +2,7 @@ What: /sys/devices/platform/hidma-*/chid /sys/devices/platform/QCOM8061:*/chid Date: Dec 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Contains the ID of the channel within the HIDMA instance. It is used to associate a given HIDMA channel with the diff --git a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt index 3b6c5c9eabdc..0373745b4e18 100644 --- a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt +++ b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt @@ -2,7 +2,7 @@ What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/priority /sys/devices/platform/QCOM8060:*/chanops/chan*/priority Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Contains either 0 or 1 and indicates if the DMA channel is a low priority (0) or high priority (1) channel. @@ -11,7 +11,7 @@ What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/weight /sys/devices/platform/QCOM8060:*/chanops/chan*/weight Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Contains 0..15 and indicates the weight of the channel among equal priority channels during round robin scheduling. @@ -20,7 +20,7 @@ What: /sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles /sys/devices/platform/QCOM8060:*/chreset_timeout_cycles Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Contains the platform specific cycle value to wait after a reset command is issued. If the value is chosen too short, @@ -32,7 +32,7 @@ What: /sys/devices/platform/hidma-mgmt*/dma_channels /sys/devices/platform/QCOM8060:*/dma_channels Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Contains the number of dma channels supported by one instance of HIDMA hardware. The value may change from chip to chip. @@ -41,7 +41,7 @@ What: /sys/devices/platform/hidma-mgmt*/hw_version_major /sys/devices/platform/QCOM8060:*/hw_version_major Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Version number major for the hardware. @@ -49,7 +49,7 @@ What: /sys/devices/platform/hidma-mgmt*/hw_version_minor /sys/devices/platform/QCOM8060:*/hw_version_minor Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Version number minor for the hardware. @@ -57,7 +57,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_rd_xactions /sys/devices/platform/QCOM8060:*/max_rd_xactions Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Contains a value between 0 and 31. Maximum number of read transactions that can be issued back to back. @@ -69,7 +69,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_read_request /sys/devices/platform/QCOM8060:*/max_read_request Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Size of each read request. The value needs to be a power of two and can be between 128 and 1024. @@ -78,7 +78,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_wr_xactions /sys/devices/platform/QCOM8060:*/max_wr_xactions Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Contains a value between 0 and 31. Maximum number of write transactions that can be issued back to back. @@ -91,7 +91,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_write_request /sys/devices/platform/QCOM8060:*/max_write_request Date: Nov 2015 KernelVersion: 4.4 -Contact: "Sinan Kaya <okaya@codeaurora.org>" +Contact: "Sinan Kaya <okaya@kernel.org>" Description: Size of each write request. The value needs to be a power of two and can be between 128 and 1024. diff --git a/Documentation/ABI/testing/sysfs-platform-power-on-reason b/Documentation/ABI/testing/sysfs-platform-power-on-reason new file mode 100644 index 000000000000..c3b29dbc64bf --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-power-on-reason @@ -0,0 +1,12 @@ +What: /sys/devices/platform/.../power_on_reason +Date: June 2023 +KernelVersion: 6.5 +Contact: Kamel Bouhara <kamel.bouhara@bootlin.com> +Description: Shows system power on reason. The following strings/reasons can + be read (the list can be extended): + "regular power-up", "RTC wakeup", "watchdog timeout", + "software reset", "reset button action", "CPU clock failure", + "crystal oscillator failure", "brown-out reset", + "unknown reason". + + The file is read only. diff --git a/Documentation/RCU/lockdep-splat.rst b/Documentation/RCU/lockdep-splat.rst index 2a5c79db57dc..bcbc4b3c88d7 100644 --- a/Documentation/RCU/lockdep-splat.rst +++ b/Documentation/RCU/lockdep-splat.rst @@ -10,7 +10,7 @@ misuses of the RCU API, most notably using one of the rcu_dereference() family to access an RCU-protected pointer without the proper protection. When such misuse is detected, an lockdep-RCU splat is emitted. -The usual cause of a lockdep-RCU slat is someone accessing an +The usual cause of a lockdep-RCU splat is someone accessing an RCU-protected data structure without either (1) being in the right kind of RCU read-side critical section or (2) holding the right update-side lock. This problem can therefore be serious: it might result in random memory diff --git a/Documentation/RCU/rculist_nulls.rst b/Documentation/RCU/rculist_nulls.rst index 9a734bf54b76..21e40fcc08de 100644 --- a/Documentation/RCU/rculist_nulls.rst +++ b/Documentation/RCU/rculist_nulls.rst @@ -18,7 +18,16 @@ to solve following problem. Without 'nulls', a typical RCU linked list managing objects which are allocated with SLAB_TYPESAFE_BY_RCU kmem_cache can use the following -algorithms: +algorithms. Following examples assume 'obj' is a pointer to such +objects, which is having below type. + +:: + + struct object { + struct hlist_node obj_node; + atomic_t refcnt; + unsigned int key; + }; 1) Lookup algorithm ------------------- @@ -26,11 +35,13 @@ algorithms: :: begin: - rcu_read_lock() + rcu_read_lock(); obj = lockless_lookup(key); if (obj) { - if (!try_get_ref(obj)) // might fail for free objects + if (!try_get_ref(obj)) { // might fail for free objects + rcu_read_unlock(); goto begin; + } /* * Because a writer could delete object, and a writer could * reuse these object before the RCU grace period, we @@ -54,7 +65,7 @@ but a version with an additional memory barrier (smp_rmb()) struct hlist_node *node, *next; for (pos = rcu_dereference((head)->first); pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) && - ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); + ({ obj = hlist_entry(pos, typeof(*obj), obj_node); 1; }); pos = rcu_dereference(next)) if (obj->key == key) return obj; @@ -66,10 +77,10 @@ And note the traditional hlist_for_each_entry_rcu() misses this smp_rmb():: struct hlist_node *node; for (pos = rcu_dereference((head)->first); pos && ({ prefetch(pos->next); 1; }) && - ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); + ({ obj = hlist_entry(pos, typeof(*obj), obj_node); 1; }); pos = rcu_dereference(pos->next)) - if (obj->key == key) - return obj; + if (obj->key == key) + return obj; return NULL; Quoting Corey Minyard:: @@ -86,7 +97,7 @@ Quoting Corey Minyard:: 2) Insertion algorithm ---------------------- -We need to make sure a reader cannot read the new 'obj->obj_next' value +We need to make sure a reader cannot read the new 'obj->obj_node.next' value and previous value of 'obj->key'. Otherwise, an item could be deleted from a chain, and inserted into another chain. If new chain was empty before the move, 'next' pointer is NULL, and lockless reader can not @@ -129,8 +140,7 @@ very very fast (before the end of RCU grace period) Avoiding extra smp_rmb() ======================== -With hlist_nulls we can avoid extra smp_rmb() in lockless_lookup() -and extra _release() in insert function. +With hlist_nulls we can avoid extra smp_rmb() in lockless_lookup(). For example, if we choose to store the slot number as the 'nulls' end-of-list marker for each slot of the hash table, we can detect @@ -142,6 +152,9 @@ the beginning. If the object was moved to the same chain, then the reader doesn't care: It might occasionally scan the list again without harm. +Note that using hlist_nulls means the type of 'obj_node' field of +'struct object' becomes 'struct hlist_nulls_node'. + 1) lookup algorithm ------------------- @@ -151,7 +164,7 @@ scan the list again without harm. head = &table[slot]; begin: rcu_read_lock(); - hlist_nulls_for_each_entry_rcu(obj, node, head, member) { + hlist_nulls_for_each_entry_rcu(obj, node, head, obj_node) { if (obj->key == key) { if (!try_get_ref(obj)) { // might fail for free objects rcu_read_unlock(); @@ -182,6 +195,9 @@ scan the list again without harm. 2) Insert algorithm ------------------- +Same to the above one, but uses hlist_nulls_add_head_rcu() instead of +hlist_add_head_rcu(). + :: /* diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst index fabaad3fd9c2..8d3afeede10e 100644 --- a/Documentation/admin-guide/cgroup-v1/memory.rst +++ b/Documentation/admin-guide/cgroup-v1/memory.rst @@ -92,8 +92,6 @@ Brief summary of control files. memory.oom_control set/show oom controls. memory.numa_stat show the number of memory usage per numa node - memory.kmem.limit_in_bytes This knob is deprecated and writing to - it will return -ENOTSUPP. memory.kmem.usage_in_bytes show current kernel memory allocation memory.kmem.failcnt show the number of kernel memory usage hits limits diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index 06c525e01ea5..b1b57f638b94 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -2691,7 +2691,7 @@ 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused) 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0 ... - 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5 + 49 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 3 50 = /dev/ttyIOC0 Altix serial card ... 81 = /dev/ttyIOC31 Altix serial card diff --git a/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst b/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst new file mode 100644 index 000000000000..264bfa937f7d --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst @@ -0,0 +1,109 @@ +.. SPDX-License-Identifier: GPL-2.0 + +GDS - Gather Data Sampling +========================== + +Gather Data Sampling is a hardware vulnerability which allows unprivileged +speculative access to data which was previously stored in vector registers. + +Problem +------- +When a gather instruction performs loads from memory, different data elements +are merged into the destination vector register. However, when a gather +instruction that is transiently executed encounters a fault, stale data from +architectural or internal vector registers may get transiently forwarded to the +destination vector register instead. This will allow a malicious attacker to +infer stale data using typical side channel techniques like cache timing +attacks. GDS is a purely sampling-based attack. + +The attacker uses gather instructions to infer the stale vector register data. +The victim does not need to do anything special other than use the vector +registers. The victim does not need to use gather instructions to be +vulnerable. + +Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks +are possible. + +Attack scenarios +---------------- +Without mitigation, GDS can infer stale data across virtually all +permission boundaries: + + Non-enclaves can infer SGX enclave data + Userspace can infer kernel data + Guests can infer data from hosts + Guest can infer guest from other guests + Users can infer data from other users + +Because of this, it is important to ensure that the mitigation stays enabled in +lower-privilege contexts like guests and when running outside SGX enclaves. + +The hardware enforces the mitigation for SGX. Likewise, VMMs should ensure +that guests are not allowed to disable the GDS mitigation. If a host erred and +allowed this, a guest could theoretically disable GDS mitigation, mount an +attack, and re-enable it. + +Mitigation mechanism +-------------------- +This issue is mitigated in microcode. The microcode defines the following new +bits: + + ================================ === ============================ + IA32_ARCH_CAPABILITIES[GDS_CTRL] R/O Enumerates GDS vulnerability + and mitigation support. + IA32_ARCH_CAPABILITIES[GDS_NO] R/O Processor is not vulnerable. + IA32_MCU_OPT_CTRL[GDS_MITG_DIS] R/W Disables the mitigation + 0 by default. + IA32_MCU_OPT_CTRL[GDS_MITG_LOCK] R/W Locks GDS_MITG_DIS=0. Writes + to GDS_MITG_DIS are ignored + Can't be cleared once set. + ================================ === ============================ + +GDS can also be mitigated on systems that don't have updated microcode by +disabling AVX. This can be done by setting gather_data_sampling="force" or +"clearcpuid=avx" on the kernel command-line. + +If used, these options will disable AVX use by turning off XSAVE YMM support. +However, the processor will still enumerate AVX support. Userspace that +does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM +support will break. + +Mitigation control on the kernel command line +--------------------------------------------- +The mitigation can be disabled by setting "gather_data_sampling=off" or +"mitigations=off" on the kernel command line. Not specifying either will default +to the mitigation being enabled. Specifying "gather_data_sampling=force" will +use the microcode mitigation when available or disable AVX on affected systems +where the microcode hasn't been updated to include the mitigation. + +GDS System Information +------------------------ +The kernel provides vulnerability status information through sysfs. For +GDS this can be accessed by the following sysfs file: + +/sys/devices/system/cpu/vulnerabilities/gather_data_sampling + +The possible values contained in this file are: + + ============================== ============================================= + Not affected Processor not vulnerable. + Vulnerable Processor vulnerable and mitigation disabled. + Vulnerable: No microcode Processor vulnerable and microcode is missing + mitigation. + Mitigation: AVX disabled, + no microcode Processor is vulnerable and microcode is missing + mitigation. AVX disabled as mitigation. + Mitigation: Microcode Processor is vulnerable and mitigation is in + effect. + Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in + effect and cannot be disabled. + Unknown: Dependent on + hypervisor status Running on a virtual guest processor that is + affected but with no way to know if host + processor is mitigated or vulnerable. + ============================== ============================================= + +GDS Default mitigation +---------------------- +The updated microcode will enable the mitigation by default. The kernel's +default action is to leave the mitigation enabled. diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst index e0614760a99e..de99caabf65a 100644 --- a/Documentation/admin-guide/hw-vuln/index.rst +++ b/Documentation/admin-guide/hw-vuln/index.rst @@ -13,9 +13,11 @@ are configurable at compile, boot or run time. l1tf mds tsx_async_abort - multihit.rst - special-register-buffer-data-sampling.rst - core-scheduling.rst - l1d_flush.rst - processor_mmio_stale_data.rst - cross-thread-rsb.rst + multihit + special-register-buffer-data-sampling + core-scheduling + l1d_flush + processor_mmio_stale_data + cross-thread-rsb + srso + gather_data_sampling diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index 4d186f599d90..32a8893e5617 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -484,11 +484,14 @@ Spectre variant 2 Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at boot, by setting the IBRS bit, and they're automatically protected against - Spectre v2 variant attacks, including cross-thread branch target injections - on SMT systems (STIBP). In other words, eIBRS enables STIBP too. + Spectre v2 variant attacks. - Legacy IBRS systems clear the IBRS bit on exit to userspace and - therefore explicitly enable STIBP for that + On Intel's enhanced IBRS systems, this includes cross-thread branch target + injections on SMT systems (STIBP). In other words, Intel eIBRS enables + STIBP, too. + + AMD Automatic IBRS does not protect userspace, and Legacy IBRS systems clear + the IBRS bit on exit to userspace, therefore both explicitly enable STIBP. The retpoline mitigation is turned on by default on vulnerable CPUs. It can be forced on or off by the administrator diff --git a/Documentation/admin-guide/hw-vuln/srso.rst b/Documentation/admin-guide/hw-vuln/srso.rst new file mode 100644 index 000000000000..b6cfb51cb0b4 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/srso.rst @@ -0,0 +1,150 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Speculative Return Stack Overflow (SRSO) +======================================== + +This is a mitigation for the speculative return stack overflow (SRSO) +vulnerability found on AMD processors. The mechanism is by now the well +known scenario of poisoning CPU functional units - the Branch Target +Buffer (BTB) and Return Address Predictor (RAP) in this case - and then +tricking the elevated privilege domain (the kernel) into leaking +sensitive data. + +AMD CPUs predict RET instructions using a Return Address Predictor (aka +Return Address Stack/Return Stack Buffer). In some cases, a non-architectural +CALL instruction (i.e., an instruction predicted to be a CALL but is +not actually a CALL) can create an entry in the RAP which may be used +to predict the target of a subsequent RET instruction. + +The specific circumstances that lead to this varies by microarchitecture +but the concern is that an attacker can mis-train the CPU BTB to predict +non-architectural CALL instructions in kernel space and use this to +control the speculative target of a subsequent kernel RET, potentially +leading to information disclosure via a speculative side-channel. + +The issue is tracked under CVE-2023-20569. + +Affected processors +------------------- + +AMD Zen, generations 1-4. That is, all families 0x17 and 0x19. Older +processors have not been investigated. + +System information and options +------------------------------ + +First of all, it is required that the latest microcode be loaded for +mitigations to be effective. + +The sysfs file showing SRSO mitigation status is: + + /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow + +The possible values in this file are: + + * 'Not affected': + + The processor is not vulnerable + + * 'Vulnerable: no microcode': + + The processor is vulnerable, no microcode extending IBPB + functionality to address the vulnerability has been applied. + + * 'Mitigation: microcode': + + Extended IBPB functionality microcode patch has been applied. It does + not address User->Kernel and Guest->Host transitions protection but it + does address User->User and VM->VM attack vectors. + + Note that User->User mitigation is controlled by how the IBPB aspect in + the Spectre v2 mitigation is selected: + + * conditional IBPB: + + where each process can select whether it needs an IBPB issued + around it PR_SPEC_DISABLE/_ENABLE etc, see :doc:`spectre` + + * strict: + + i.e., always on - by supplying spectre_v2_user=on on the kernel + command line + + (spec_rstack_overflow=microcode) + + * 'Mitigation: safe RET': + + Software-only mitigation. It complements the extended IBPB microcode + patch functionality by addressing User->Kernel and Guest->Host + transitions protection. + + Selected by default or by spec_rstack_overflow=safe-ret + + * 'Mitigation: IBPB': + + Similar protection as "safe RET" above but employs an IBPB barrier on + privilege domain crossings (User->Kernel, Guest->Host). + + (spec_rstack_overflow=ibpb) + + * 'Mitigation: IBPB on VMEXIT': + + Mitigation addressing the cloud provider scenario - the Guest->Host + transitions only. + + (spec_rstack_overflow=ibpb-vmexit) + + + +In order to exploit vulnerability, an attacker needs to: + + - gain local access on the machine + + - break kASLR + + - find gadgets in the running kernel in order to use them in the exploit + + - potentially create and pin an additional workload on the sibling + thread, depending on the microarchitecture (not necessary on fam 0x19) + + - run the exploit + +Considering the performance implications of each mitigation type, the +default one is 'Mitigation: safe RET' which should take care of most +attack vectors, including the local User->Kernel one. + +As always, the user is advised to keep her/his system up-to-date by +applying software updates regularly. + +The default setting will be reevaluated when needed and especially when +new attack vectors appear. + +As one can surmise, 'Mitigation: safe RET' does come at the cost of some +performance depending on the workload. If one trusts her/his userspace +and does not want to suffer the performance impact, one can always +disable the mitigation with spec_rstack_overflow=off. + +Similarly, 'Mitigation: IBPB' is another full mitigation type employing +an indrect branch prediction barrier after having applied the required +microcode patch for one's system. This mitigation comes also at +a performance cost. + +Mitigation: safe RET +-------------------- + +The mitigation works by ensuring all RET instructions speculate to +a controlled location, similar to how speculation is controlled in the +retpoline sequence. To accomplish this, the __x86_return_thunk forces +the CPU to mispredict every function return using a 'safe return' +sequence. + +To ensure the safety of this mitigation, the kernel must ensure that the +safe return sequence is itself free from attacker interference. In Zen3 +and Zen4, this is accomplished by creating a BTB alias between the +untraining function srso_alias_untrain_ret() and the safe return +function srso_alias_safe_ret() which results in evicting a potentially +poisoned BTB entry and using that safe one for all function returns. + +In older Zen1 and Zen2, this is accomplished using a reinterpretation +technique similar to Retbleed one: srso_untrain_ret() and +srso_safe_ret(). diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst index c18d94fa6470..599e8d3bcbc3 100644 --- a/Documentation/admin-guide/kdump/vmcoreinfo.rst +++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst @@ -141,8 +141,8 @@ nodemask_t The size of a nodemask_t type. Used to compute the number of online nodes. -(page, flags|_refcount|mapping|lru|_mapcount|private|compound_dtor|compound_order|compound_head) -------------------------------------------------------------------------------------------------- +(page, flags|_refcount|mapping|lru|_mapcount|private|compound_order|compound_head) +---------------------------------------------------------------------------------- User-space tools compute their values based on the offset of these variables. The variables are used when excluding unnecessary pages. @@ -325,8 +325,8 @@ NR_FREE_PAGES On linux-2.6.21 or later, the number of free pages is in vm_stat[NR_FREE_PAGES]. Used to get the number of free pages. -PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask ------------------------------------------------------------------------------- +PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask|PG_hugetlb +----------------------------------------------------------------------------------------- Page attributes. These flags are used to filter various unnecessary for dumping pages. @@ -338,12 +338,6 @@ More page attributes. These flags are used to filter various unnecessary for dumping pages. -HUGETLB_PAGE_DTOR ------------------ - -The HUGETLB_PAGE_DTOR flag denotes hugetlbfs pages. Makedumpfile -excludes these pages. - x86_64 ====== @@ -624,3 +618,9 @@ Used to get the correct ranges: * VMALLOC_START ~ VMALLOC_END : vmalloc() / ioremap() space. * VMEMMAP_START ~ VMEMMAP_END : vmemmap space, used for struct page array. * KERNEL_LINK_ADDR : start address of Kernel link and BPF + +va_kernel_pa_offset +------------------- + +Indicates the offset between the kernel virtual and physical mappings. +Used to translate virtual to physical addresses. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index d5b0fd89f333..0b739a37c524 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -553,7 +553,7 @@ others). ccw_timeout_log [S390] - See Documentation/s390/common_io.rst for details. + See Documentation/arch/s390/common_io.rst for details. cgroup_disable= [KNL] Disable a particular controller or optional feature Format: {name of the controller(s) or feature(s) to disable} @@ -598,7 +598,7 @@ Setting checkreqprot to 1 is deprecated. cio_ignore= [S390] - See Documentation/s390/common_io.rst for details. + See Documentation/arch/s390/common_io.rst for details. clearcpuid=X[,X...] [X86] Disable CPUID feature X for the kernel. See @@ -696,7 +696,7 @@ kernel/dma/contiguous.c cma_pernuma=nn[MG] - [ARM64,KNL,CMA] + [KNL,CMA] Sets the size of kernel per-numa memory area for contiguous memory allocations. A value of 0 disables per-numa CMA altogether. And If this option is not @@ -706,6 +706,17 @@ which is located in node nid, if the allocation fails, they will fallback to the global default memory area. + numa_cma=<node>:nn[MG][,<node>:nn[MG]] + [KNL,CMA] + Sets the size of kernel numa memory area for + contiguous memory allocations. It will reserve CMA + area for the specified node. + + With numa CMA enabled, DMA users on node nid will + first try to allocate buffer from the numa area + which is located in node nid, if the allocation fails, + they will fallback to the global default memory area. + cmo_free_hint= [PPC] Format: { yes | no } Specify whether pages are marked as being inactive when they are freed. This is used in CMO environments @@ -1623,6 +1634,26 @@ Format: off | on default: on + gather_data_sampling= + [X86,INTEL] Control the Gather Data Sampling (GDS) + mitigation. + + Gather Data Sampling is a hardware vulnerability which + allows unprivileged speculative access to data which was + previously stored in vector registers. + + This issue is mitigated by default in updated microcode. + The mitigation may have a performance impact but can be + disabled. On systems without the microcode mitigation + disabling AVX serves as a mitigation. + + force: Disable AVX to mitigate systems without + microcode mitigation. No effect if the microcode + mitigation is present. Known to cause crashes in + userspace with buggy AVX enumeration. + + off: Disable GDS mitigation. + gcov_persist= [GCOV] When non-zero (default), profiling data for kernel modules is saved and remains accessible via debugfs, even when the module is unloaded/reloaded. @@ -2918,6 +2949,10 @@ locktorture.torture_type= [KNL] Specify the locking implementation to test. + locktorture.writer_fifo= [KNL] + Run the write-side locktorture kthreads at + sched_set_fifo() real-time priority. + locktorture.verbose= [KNL] Enable additional printk() statements. @@ -3273,24 +3308,25 @@ Disable all optional CPU mitigations. This improves system performance, but it may also expose users to several CPU vulnerabilities. - Equivalent to: nopti [X86,PPC] - if nokaslr then kpti=0 [ARM64] - nospectre_v1 [X86,PPC] - nobp=0 [S390] - nospectre_v2 [X86,PPC,S390,ARM64] - spectre_v2_user=off [X86] - spec_store_bypass_disable=off [X86,PPC] - ssbd=force-off [ARM64] - nospectre_bhb [ARM64] + Equivalent to: if nokaslr then kpti=0 [ARM64] + gather_data_sampling=off [X86] + kvm.nx_huge_pages=off [X86] l1tf=off [X86] mds=off [X86] - tsx_async_abort=off [X86] - kvm.nx_huge_pages=off [X86] - srbds=off [X86,INTEL] + mmio_stale_data=off [X86] no_entry_flush [PPC] no_uaccess_flush [PPC] - mmio_stale_data=off [X86] + nobp=0 [S390] + nopti [X86,PPC] + nospectre_bhb [ARM64] + nospectre_v1 [X86,PPC] + nospectre_v2 [X86,PPC,S390,ARM64] retbleed=off [X86] + spec_store_bypass_disable=off [X86,PPC] + spectre_v2_user=off [X86] + srbds=off [X86,INTEL] + ssbd=force-off [ARM64] + tsx_async_abort=off [X86] Exceptions: This does not have any effect on @@ -4928,6 +4964,15 @@ test until boot completes in order to avoid interference. + rcuscale.kfree_by_call_rcu= [KNL] + In kernels built with CONFIG_RCU_LAZY=y, test + call_rcu() instead of kfree_rcu(). + + rcuscale.kfree_mult= [KNL] + Instead of allocating an object of size kfree_obj, + allocate one of kfree_mult * sizeof(kfree_obj). + Defaults to 1. + rcuscale.kfree_rcu_test= [KNL] Set to measure performance of kfree_rcu() flooding. @@ -4953,6 +4998,12 @@ Number of loops doing rcuscale.kfree_alloc_num number of allocations and frees. + rcuscale.minruntime= [KNL] + Set the minimum test run time in seconds. This + does not affect the data-collection interval, + but instead allows better measurement of things + like CPU consumption. + rcuscale.nreaders= [KNL] Set number of RCU readers. The value -1 selects N, where N is the number of CPUs. A value @@ -4967,7 +5018,7 @@ the same as for rcuscale.nreaders. N, where N is the number of CPUs - rcuscale.perf_type= [KNL] + rcuscale.scale_type= [KNL] Specify the RCU implementation to test. rcuscale.shutdown= [KNL] @@ -4983,6 +5034,11 @@ in microseconds. The default of zero says no holdoff. + rcuscale.writer_holdoff_jiffies= [KNL] + Additional write-side holdoff between grace + periods, but in jiffies. The default of zero + says no holdoff. + rcutorture.fqs_duration= [KNL] Set duration of force_quiescent_state bursts in microseconds. @@ -5264,6 +5320,13 @@ number avoids disturbing real-time workloads, but lengthens grace periods. + rcupdate.rcu_task_lazy_lim= [KNL] + Number of callbacks on a given CPU that will + cancel laziness on that CPU. Use -1 to disable + cancellation of laziness, but be advised that + doing so increases the danger of OOM due to + callback flooding. + rcupdate.rcu_task_stall_info= [KNL] Set initial timeout in jiffies for RCU task stall informational messages, which give some indication @@ -5293,6 +5356,29 @@ A change in value does not take effect until the beginning of the next grace period. + rcupdate.rcu_tasks_lazy_ms= [KNL] + Set timeout in milliseconds RCU Tasks asynchronous + callback batching for call_rcu_tasks(). + A negative value will take the default. A value + of zero will disable batching. Batching is + always disabled for synchronize_rcu_tasks(). + + rcupdate.rcu_tasks_rude_lazy_ms= [KNL] + Set timeout in milliseconds RCU Tasks + Rude asynchronous callback batching for + call_rcu_tasks_rude(). A negative value + will take the default. A value of zero will + disable batching. Batching is always disabled + for synchronize_rcu_tasks_rude(). + + rcupdate.rcu_tasks_trace_lazy_ms= [KNL] + Set timeout in milliseconds RCU Tasks + Trace asynchronous callback batching for + call_rcu_tasks_trace(). A negative value + will take the default. A value of zero will + disable batching. Batching is always disabled + for synchronize_rcu_tasks_trace(). + rcupdate.rcu_self_test= [KNL] Run the RCU early boot self tests @@ -5501,6 +5587,10 @@ Useful for devices that are detected asynchronously (e.g. USB and MMC devices). + rootwait= [KNL] Maximum time (in seconds) to wait for root device + to show up before attempting to mount the root + filesystem. + rproc_mem=nn[KMG][@address] [KNL,ARM,CMA] Remoteproc physical memory block. Memory area to be used by remote processor image, @@ -5875,6 +5965,17 @@ Not specifying this option is equivalent to spectre_v2_user=auto. + spec_rstack_overflow= + [X86] Control RAS overflow mitigation on AMD Zen CPUs + + off - Disable mitigation + microcode - Enable microcode mitigation only + safe-ret - Enable sw-only safe RET mitigation (default) + ibpb - Enable mitigation by issuing IBPB on + kernel entry + ibpb-vmexit - Issue IBPB only on VMEXIT + (cloud-specific mitigation) + spec_store_bypass_disable= [HW] Control Speculative Store Bypass (SSB) Disable mitigation (Speculative Store Bypass vulnerability) @@ -6243,10 +6344,6 @@ -1: disable all critical trip points in all thermal zones <degrees C>: override all critical trip points - thermal.nocrt= [HW,ACPI] - Set to disable actions on ACPI thermal zone - critical and hot trip points. - thermal.off= [HW,ACPI] 1: disable ACPI thermal control @@ -6308,6 +6405,13 @@ This will guarantee that all the other pcrs are saved. + tpm_tis.interrupts= [HW,TPM] + Enable interrupts for the MMIO based physical layer + for the FIFO interface. By default it is set to false + (0). For more information about TPM hardware interfaces + defined by Trusted Computing Group (TCG) see + https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/ + tp_printk [FTRACE] Have the tracepoints sent to printk as well as the tracing ring buffer. This is useful for early boot up diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index 37cbc5c0a2ab..8da1b7281827 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -87,7 +87,7 @@ comma (","). :: │ │ │ │ │ │ │ filters/nr_filters │ │ │ │ │ │ │ │ 0/type,matching,memcg_id │ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds - │ │ │ │ │ │ │ tried_regions/ + │ │ │ │ │ │ │ tried_regions/total_bytes │ │ │ │ │ │ │ │ 0/start,end,nr_accesses,age │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... @@ -127,14 +127,18 @@ in the state. Writing ``commit`` to the ``state`` file makes kdamond reads the user inputs in the sysfs files except ``state`` file again. Writing ``update_schemes_stats`` to ``state`` file updates the contents of stats files for each DAMON-based operation scheme of the kdamond. For details of the -stats, please refer to :ref:`stats section <sysfs_schemes_stats>`. Writing -``update_schemes_tried_regions`` to ``state`` file updates the DAMON-based -operation scheme action tried regions directory for each DAMON-based operation -scheme of the kdamond. Writing ``clear_schemes_tried_regions`` to ``state`` -file clears the DAMON-based operating scheme action tried regions directory for -each DAMON-based operation scheme of the kdamond. For details of the -DAMON-based operation scheme action tried regions directory, please refer to -:ref:`tried_regions section <sysfs_schemes_tried_regions>`. +stats, please refer to :ref:`stats section <sysfs_schemes_stats>`. + +Writing ``update_schemes_tried_regions`` to ``state`` file updates the +DAMON-based operation scheme action tried regions directory for each +DAMON-based operation scheme of the kdamond. Writing +``update_schemes_tried_bytes`` to ``state`` file updates only +``.../tried_regions/total_bytes`` files. Writing +``clear_schemes_tried_regions`` to ``state`` file clears the DAMON-based +operating scheme action tried regions directory for each DAMON-based operation +scheme of the kdamond. For details of the DAMON-based operation scheme action +tried regions directory, please refer to :ref:`tried_regions section +<sysfs_schemes_tried_regions>`. If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread. @@ -359,15 +363,21 @@ number (``N``) to the file creates the number of child directories named ``0`` to ``N-1``. Each directory represents each filter. The filters are evaluated in the numeric order. -Each filter directory contains three files, namely ``type``, ``matcing``, and -``memcg_path``. You can write one of two special keywords, ``anon`` for -anonymous pages, or ``memcg`` for specific memory cgroup filtering. In case of -the memory cgroup filtering, you can specify the memory cgroup of the interest -by writing the path of the memory cgroup from the cgroups mount point to -``memcg_path`` file. You can write ``Y`` or ``N`` to ``matching`` file to -filter out pages that does or does not match to the type, respectively. Then, -the scheme's action will not be applied to the pages that specified to be -filtered out. +Each filter directory contains six files, namely ``type``, ``matcing``, +``memcg_path``, ``addr_start``, ``addr_end``, and ``target_idx``. To ``type`` +file, you can write one of four special keywords: ``anon`` for anonymous pages, +``memcg`` for specific memory cgroup, ``addr`` for specific address range (an +open-ended interval), or ``target`` for specific DAMON monitoring target +filtering. In case of the memory cgroup filtering, you can specify the memory +cgroup of the interest by writing the path of the memory cgroup from the +cgroups mount point to ``memcg_path`` file. In case of the address range +filtering, you can specify the start and end address of the range to +``addr_start`` and ``addr_end`` files, respectively. For the DAMON monitoring +target filtering, you can specify the index of the target between the list of +the DAMON context's monitoring targets list to ``target_idx`` file. You can +write ``Y`` or ``N`` to ``matching`` file to filter out pages that does or does +not match to the type, respectively. Then, the scheme's action will not be +applied to the pages that specified to be filtered out. For example, below restricts a DAMOS action to be applied to only non-anonymous pages of all memory cgroups except ``/having_care_already``.:: @@ -381,8 +391,14 @@ pages of all memory cgroups except ``/having_care_already``.:: echo /having_care_already > 1/memcg_path echo N > 1/matching -Note that filters are currently supported only when ``paddr`` -`implementation <sysfs_contexts>` is being used. +Note that ``anon`` and ``memcg`` filters are currently supported only when +``paddr`` `implementation <sysfs_contexts>` is being used. + +Also, memory regions that are filtered out by ``addr`` or ``target`` filters +are not counted as the scheme has tried to those, while regions that filtered +out by other type filters are counted as the scheme has tried to. The +difference is applied to :ref:`stats <damos_stats>` and +:ref:`tried regions <sysfs_schemes_tried_regions>`. .. _sysfs_schemes_stats: @@ -406,13 +422,21 @@ stats by writing a special keyword, ``update_schemes_stats`` to the relevant schemes/<N>/tried_regions/ -------------------------- +This directory initially has one file, ``total_bytes``. + When a special keyword, ``update_schemes_tried_regions``, is written to the -relevant ``kdamonds/<N>/state`` file, DAMON creates directories named integer -starting from ``0`` under this directory. Each directory contains files -exposing detailed information about each of the memory region that the -corresponding scheme's ``action`` has tried to be applied under this directory, -during next :ref:`aggregation interval <sysfs_monitoring_attrs>`. The -information includes address range, ``nr_accesses``, and ``age`` of the region. +relevant ``kdamonds/<N>/state`` file, DAMON updates the ``total_bytes`` file so +that reading it returns the total size of the scheme tried regions, and creates +directories named integer starting from ``0`` under this directory. Each +directory contains files exposing detailed information about each of the memory +region that the corresponding scheme's ``action`` has tried to be applied under +this directory, during next :ref:`aggregation interval +<sysfs_monitoring_attrs>`. The information includes address range, +``nr_accesses``, and ``age`` of the region. + +Writing ``update_schemes_tried_bytes`` to the relevant ``kdamonds/<N>/state`` +file will only update the ``total_bytes`` file, and will not create the +subdirectories. The directories will be removed when another special keyword, ``clear_schemes_tried_regions``, is written to the relevant diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst index 7626392fe82c..776f244bdae4 100644 --- a/Documentation/admin-guide/mm/ksm.rst +++ b/Documentation/admin-guide/mm/ksm.rst @@ -159,6 +159,8 @@ The effectiveness of KSM and MADV_MERGEABLE is shown in ``/sys/kernel/mm/ksm/``: general_profit how effective is KSM. The calculation is explained below. +pages_scanned + how many pages are being scanned for ksm pages_shared how many shared pages are being used pages_sharing @@ -173,6 +175,13 @@ stable_node_chains the number of KSM pages that hit the ``max_page_sharing`` limit stable_node_dups number of duplicated KSM pages +ksm_zero_pages + how many zero pages that are still mapped into processes were mapped by + KSM when deduplicating. + +When ``use_zero_pages`` is/was enabled, the sum of ``pages_sharing`` + +``ksm_zero_pages`` represents the actual number of pages saved by KSM. +if ``use_zero_pages`` has never been enabled, ``ksm_zero_pages`` is 0. A high ratio of ``pages_sharing`` to ``pages_shared`` indicates good sharing, but a high ratio of ``pages_unshared`` to ``pages_sharing`` @@ -196,21 +205,25 @@ several times, which are unprofitable memory consumed. 1) How to determine whether KSM save memory or consume memory in system-wide range? Here is a simple approximate calculation for reference:: - general_profit =~ pages_sharing * sizeof(page) - (all_rmap_items) * + general_profit =~ ksm_saved_pages * sizeof(page) - (all_rmap_items) * sizeof(rmap_item); - where all_rmap_items can be easily obtained by summing ``pages_sharing``, - ``pages_shared``, ``pages_unshared`` and ``pages_volatile``. + where ksm_saved_pages equals to the sum of ``pages_sharing`` + + ``ksm_zero_pages`` of the system, and all_rmap_items can be easily + obtained by summing ``pages_sharing``, ``pages_shared``, ``pages_unshared`` + and ``pages_volatile``. 2) The KSM profit inner a single process can be similarly obtained by the following approximate calculation:: - process_profit =~ ksm_merging_pages * sizeof(page) - + process_profit =~ ksm_saved_pages * sizeof(page) - ksm_rmap_items * sizeof(rmap_item). - where ksm_merging_pages is shown under the directory ``/proc/<pid>/``, - and ksm_rmap_items is shown in ``/proc/<pid>/ksm_stat``. The process profit - is also shown in ``/proc/<pid>/ksm_stat`` as ksm_process_profit. + where ksm_saved_pages equals to the sum of ``ksm_merging_pages`` and + ``ksm_zero_pages``, both of which are shown under the directory + ``/proc/<pid>/ksm_stat``, and ksm_rmap_items is also shown in + ``/proc/<pid>/ksm_stat``. The process profit is also shown in + ``/proc/<pid>/ksm_stat`` as ksm_process_profit. From the perspective of application, a high ratio of ``ksm_rmap_items`` to ``ksm_merging_pages`` means a bad madvise-applied policy, so developers or diff --git a/Documentation/admin-guide/mm/memory-hotplug.rst b/Documentation/admin-guide/mm/memory-hotplug.rst index 1b02fe5807cc..cfe034cf1e87 100644 --- a/Documentation/admin-guide/mm/memory-hotplug.rst +++ b/Documentation/admin-guide/mm/memory-hotplug.rst @@ -291,6 +291,14 @@ The following files are currently defined: Availability depends on the CONFIG_ARCH_MEMORY_PROBE kernel configuration option. ``uevent`` read-write: generic udev file for device subsystems. +``crash_hotplug`` read-only: when changes to the system memory map + occur due to hot un/plug of memory, this file contains + '1' if the kernel updates the kdump capture kernel memory + map itself (via elfcorehdr), or '0' if userspace must update + the kdump capture kernel memory map. + + Availability depends on the CONFIG_MEMORY_HOTPLUG kernel + configuration option. ====================== ========================================================= .. note:: @@ -433,6 +441,18 @@ The following module parameters are currently defined: memory in a way that huge pages in bigger granularity cannot be formed on hotplugged memory. + + With value "force" it could result in memory + wastage due to memmap size limitations. For + example, if the memmap for a memory block + requires 1 MiB, but the pageblock size is 2 + MiB, 1 MiB of hotplugged memory will be wasted. + Note that there are still cases where the + feature cannot be enforced: for example, if the + memmap is smaller than a single page, or if the + architecture does not support the forced mode + in all configurations. + ``online_policy`` read-write: Set the basic policy used for automatic zone selection when onlining memory blocks without specifying a target zone. @@ -669,7 +689,7 @@ when still encountering permanently unmovable pages within ZONE_MOVABLE (-> BUG), memory offlining will keep retrying until it eventually succeeds. When offlining is triggered from user space, the offlining context can be -terminated by sending a fatal signal. A timeout based offlining can easily be +terminated by sending a signal. A timeout based offlining can easily be implemented via:: % timeout $TIMEOUT offline_block | failure_handling diff --git a/Documentation/admin-guide/mm/userfaultfd.rst b/Documentation/admin-guide/mm/userfaultfd.rst index 7c304e432205..4349a8c2b978 100644 --- a/Documentation/admin-guide/mm/userfaultfd.rst +++ b/Documentation/admin-guide/mm/userfaultfd.rst @@ -244,6 +244,21 @@ write-protected (so future writes will also result in a WP fault). These ioctls support a mode flag (``UFFDIO_COPY_MODE_WP`` or ``UFFDIO_CONTINUE_MODE_WP`` respectively) to configure the mapping this way. +Memory Poisioning Emulation +--------------------------- + +In response to a fault (either missing or minor), an action userspace can +take to "resolve" it is to issue a ``UFFDIO_POISON``. This will cause any +future faulters to either get a SIGBUS, or in KVM's case the guest will +receive an MCE as if there were hardware memory poisoning. + +This is used to emulate hardware memory poisoning. Imagine a VM running on a +machine which experiences a real hardware memory error. Later, we live migrate +the VM to another physical machine. Since we want the migration to be +transparent to the guest, we want that same address range to act as if it was +still poisoned, even though it's on a new physical host which ostensibly +doesn't have a memory error in the exact same spot. + QEMU/KVM ======== diff --git a/Documentation/admin-guide/mm/zswap.rst b/Documentation/admin-guide/mm/zswap.rst index c5c2c7dbb155..45b98390e938 100644 --- a/Documentation/admin-guide/mm/zswap.rst +++ b/Documentation/admin-guide/mm/zswap.rst @@ -49,7 +49,7 @@ compressed pool. Design ====== -Zswap receives pages for compression through the Frontswap API and is able to +Zswap receives pages for compression from the swap subsystem and is able to evict pages from its own compressed pool on an LRU basis and write them back to the backing swap device in the case that the compressed pool is full. @@ -70,19 +70,19 @@ means the compression ratio will always be 2:1 or worse (because of half-full zbud pages). The zsmalloc type zpool has a more complex compressed page storage method, and it can achieve greater storage densities. -When a swap page is passed from frontswap to zswap, zswap maintains a mapping +When a swap page is passed from swapout to zswap, zswap maintains a mapping of the swap entry, a combination of the swap type and swap offset, to the zpool handle that references that compressed swap page. This mapping is achieved with a red-black tree per swap type. The swap offset is the search key for the tree nodes. -During a page fault on a PTE that is a swap entry, frontswap calls the zswap -load function to decompress the page into the page allocated by the page fault -handler. +During a page fault on a PTE that is a swap entry, the swapin code calls the +zswap load function to decompress the page into the page allocated by the page +fault handler. Once there are no PTEs referencing a swap page stored in zswap (i.e. the count -in the swap_map goes to 0) the swap code calls the zswap invalidate function, -via frontswap, to free the compressed entry. +in the swap_map goes to 0) the swap code calls the zswap invalidate function +to free the compressed entry. Zswap seeks to be simple in its policies. Sysfs attributes allow for one user controlled policy: diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index 496cdca5cb99..e96f057ea2a0 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -63,6 +63,14 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #1902691 | ARM64_ERRATUM_1902691 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2051678 | ARM64_ERRATUM_2051678 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2077057 | ARM64_ERRATUM_2077057 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2441009 | ARM64_ERRATUM_2441009 | ++----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2658417 | ARM64_ERRATUM_2658417 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 | @@ -109,14 +117,6 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A77 | #1508412 | ARM64_ERRATUM_1508412 | +----------------+-----------------+-----------------+-----------------------------+ -| ARM | Cortex-A510 | #2051678 | ARM64_ERRATUM_2051678 | -+----------------+-----------------+-----------------+-----------------------------+ -| ARM | Cortex-A510 | #2077057 | ARM64_ERRATUM_2077057 | -+----------------+-----------------+-----------------+-----------------------------+ -| ARM | Cortex-A510 | #2441009 | ARM64_ERRATUM_2441009 | -+----------------+-----------------+-----------------+-----------------------------+ -| ARM | Cortex-A510 | #2658417 | ARM64_ERRATUM_2658417 | -+----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2119858 | ARM64_ERRATUM_2119858 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2054223 | ARM64_ERRATUM_2054223 | @@ -148,6 +148,9 @@ stable kernels. | ARM | MMU-700 | #2268618,2812531| N/A | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| ARM | GIC-700 | #2941627 | ARM64_ERRATUM_2941627 | ++----------------+-----------------+-----------------+-----------------------------+ ++----------------+-----------------+-----------------+-----------------------------+ | Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_845719 | +----------------+-----------------+-----------------+-----------------------------+ | Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_843419 | @@ -195,6 +198,9 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Hisilicon | Hip08 SMMU PMCG | #162001800 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +| Hisilicon | Hip08 SMMU PMCG | #162001900 | N/A | +| | Hip09 SMMU PMCG | | | ++----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ | Qualcomm Tech. | Kryo/Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/arch/arm64/sme.rst b/Documentation/arch/arm64/sme.rst index ba529a1dc606..3d0e53ecac4f 100644 --- a/Documentation/arch/arm64/sme.rst +++ b/Documentation/arch/arm64/sme.rst @@ -322,7 +322,7 @@ The regset data starts with struct user_za_header, containing: VL is supported. * The size and layout of the payload depends on the header fields. The - SME_PT_ZA_*() macros are provided to facilitate access to the data. + ZA_PT_ZA*() macros are provided to facilitate access to the data. * In either case, for SETREGSET it is permissible to omit the payload, in which case the vector length and flags are changed and PSTATE.ZA is set to 0 diff --git a/Documentation/arch/index.rst b/Documentation/arch/index.rst index dc59634c5fbb..84b80255b851 100644 --- a/Documentation/arch/index.rst +++ b/Documentation/arch/index.rst @@ -21,7 +21,7 @@ implementation. parisc/index ../powerpc/index ../riscv/index - ../s390/index + s390/index sh/index sparc/index x86/index diff --git a/Documentation/s390/3270.ChangeLog b/Documentation/arch/s390/3270.ChangeLog index ecaf60b6c381..ecaf60b6c381 100644 --- a/Documentation/s390/3270.ChangeLog +++ b/Documentation/arch/s390/3270.ChangeLog diff --git a/Documentation/s390/3270.rst b/Documentation/arch/s390/3270.rst index e09e77954238..467eace91473 100644 --- a/Documentation/s390/3270.rst +++ b/Documentation/arch/s390/3270.rst @@ -116,7 +116,7 @@ Here are the installation steps in detail: as a 3270, not a 3215. 5. Run the 3270 configuration script config3270. It is - distributed in this same directory, Documentation/s390, as + distributed in this same directory, Documentation/arch/s390, as config3270.sh. Inspect the output script it produces, /tmp/mkdev3270, and then run that script. This will create the necessary character special device files and make the necessary @@ -125,7 +125,7 @@ Here are the installation steps in detail: Then notify /sbin/init that /etc/inittab has changed, by issuing the telinit command with the q operand:: - cd Documentation/s390 + cd Documentation/arch/s390 sh config3270.sh sh /tmp/mkdev3270 telinit q diff --git a/Documentation/s390/cds.rst b/Documentation/arch/s390/cds.rst index 7006d8209d2e..bcad2a14244a 100644 --- a/Documentation/s390/cds.rst +++ b/Documentation/arch/s390/cds.rst @@ -39,7 +39,7 @@ some of them are ESA/390 platform specific. Note: In order to write a driver for S/390, you also need to look into the interface - described in Documentation/s390/driver-model.rst. + described in Documentation/arch/s390/driver-model.rst. Note for porting drivers from 2.4: diff --git a/Documentation/s390/common_io.rst b/Documentation/arch/s390/common_io.rst index 846485681ce7..6dcb40cb7145 100644 --- a/Documentation/s390/common_io.rst +++ b/Documentation/arch/s390/common_io.rst @@ -136,5 +136,5 @@ debugfs entries The level of logging can be changed to be more or less verbose by piping to /sys/kernel/debug/s390dbf/cio_*/level a number between 0 and 6; see the - documentation on the S/390 debug feature (Documentation/s390/s390dbf.rst) + documentation on the S/390 debug feature (Documentation/arch/s390/s390dbf.rst) for details. diff --git a/Documentation/s390/config3270.sh b/Documentation/arch/s390/config3270.sh index 515e2f431487..515e2f431487 100644 --- a/Documentation/s390/config3270.sh +++ b/Documentation/arch/s390/config3270.sh diff --git a/Documentation/s390/driver-model.rst b/Documentation/arch/s390/driver-model.rst index ad4bc2dbea43..ad4bc2dbea43 100644 --- a/Documentation/s390/driver-model.rst +++ b/Documentation/arch/s390/driver-model.rst diff --git a/Documentation/s390/features.rst b/Documentation/arch/s390/features.rst index 57c296a9d8f3..57c296a9d8f3 100644 --- a/Documentation/s390/features.rst +++ b/Documentation/arch/s390/features.rst diff --git a/Documentation/s390/index.rst b/Documentation/arch/s390/index.rst index 73c79bf586fd..73c79bf586fd 100644 --- a/Documentation/s390/index.rst +++ b/Documentation/arch/s390/index.rst diff --git a/Documentation/s390/monreader.rst b/Documentation/arch/s390/monreader.rst index 21cdfb699b49..21cdfb699b49 100644 --- a/Documentation/s390/monreader.rst +++ b/Documentation/arch/s390/monreader.rst diff --git a/Documentation/s390/pci.rst b/Documentation/arch/s390/pci.rst index a1a72a47dc96..d5755484d8e7 100644 --- a/Documentation/s390/pci.rst +++ b/Documentation/arch/s390/pci.rst @@ -40,7 +40,7 @@ For example: Change the level of logging to be more or less verbose by piping a number between 0 and 6 to /sys/kernel/debug/s390dbf/pci_*/level. For details, see the documentation on the S/390 debug feature at - Documentation/s390/s390dbf.rst. + Documentation/arch/s390/s390dbf.rst. Sysfs entries ============= diff --git a/Documentation/s390/qeth.rst b/Documentation/arch/s390/qeth.rst index f02fdaa68de0..f02fdaa68de0 100644 --- a/Documentation/s390/qeth.rst +++ b/Documentation/arch/s390/qeth.rst diff --git a/Documentation/s390/s390dbf.rst b/Documentation/arch/s390/s390dbf.rst index af8bdc3629e7..af8bdc3629e7 100644 --- a/Documentation/s390/s390dbf.rst +++ b/Documentation/arch/s390/s390dbf.rst diff --git a/Documentation/s390/text_files.rst b/Documentation/arch/s390/text_files.rst index c94d05d4fa17..c94d05d4fa17 100644 --- a/Documentation/s390/text_files.rst +++ b/Documentation/arch/s390/text_files.rst diff --git a/Documentation/s390/vfio-ap-locking.rst b/Documentation/arch/s390/vfio-ap-locking.rst index 0dfcdb562e21..0dfcdb562e21 100644 --- a/Documentation/s390/vfio-ap-locking.rst +++ b/Documentation/arch/s390/vfio-ap-locking.rst diff --git a/Documentation/s390/vfio-ap.rst b/Documentation/arch/s390/vfio-ap.rst index 929ee1c1c940..929ee1c1c940 100644 --- a/Documentation/s390/vfio-ap.rst +++ b/Documentation/arch/s390/vfio-ap.rst diff --git a/Documentation/s390/vfio-ccw.rst b/Documentation/arch/s390/vfio-ccw.rst index 37026fa18179..42960b7b0d70 100644 --- a/Documentation/s390/vfio-ccw.rst +++ b/Documentation/arch/s390/vfio-ccw.rst @@ -440,6 +440,6 @@ Reference 1. ESA/s390 Principles of Operation manual (IBM Form. No. SA22-7832) 2. ESA/390 Common I/O Device Commands manual (IBM Form. No. SA22-7204) 3. https://en.wikipedia.org/wiki/Channel_I/O -4. Documentation/s390/cds.rst +4. Documentation/arch/s390/cds.rst 5. Documentation/driver-api/vfio.rst 6. Documentation/driver-api/vfio-mediated-device.rst diff --git a/Documentation/s390/zfcpdump.rst b/Documentation/arch/s390/zfcpdump.rst index a61de7aa8778..a61de7aa8778 100644 --- a/Documentation/s390/zfcpdump.rst +++ b/Documentation/arch/s390/zfcpdump.rst diff --git a/Documentation/arch/x86/boot.rst b/Documentation/arch/x86/boot.rst index 32d6099ba994..f5d2f2414de8 100644 --- a/Documentation/arch/x86/boot.rst +++ b/Documentation/arch/x86/boot.rst @@ -1417,7 +1417,7 @@ execution context provided by the EFI firmware. The function prototype for the handover entry point looks like this:: - efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp) + efi_stub_entry(void *handle, efi_system_table_t *table, struct boot_params *bp) 'handle' is the EFI image handle passed to the boot loader by the EFI firmware, 'table' is the EFI system table - these are the first two diff --git a/Documentation/block/biovecs.rst b/Documentation/block/biovecs.rst index ddb867e0185b..b9dc0c9dbee4 100644 --- a/Documentation/block/biovecs.rst +++ b/Documentation/block/biovecs.rst @@ -134,6 +134,7 @@ Usage of helpers: bio_for_each_bvec_all() bio_first_bvec_all() bio_first_page_all() + bio_first_folio_all() bio_last_bvec_all() * The following helpers iterate over single-page segment. The passed 'struct diff --git a/Documentation/bpf/bpf_design_QA.rst b/Documentation/bpf/bpf_design_QA.rst index 38372a956d65..eb19c945f4d5 100644 --- a/Documentation/bpf/bpf_design_QA.rst +++ b/Documentation/bpf/bpf_design_QA.rst @@ -140,11 +140,6 @@ A: Because if we picked one-to-one relationship to x64 it would have made it more complicated to support on arm64 and other archs. Also it needs div-by-zero runtime check. -Q: Why there is no BPF_SDIV for signed divide operation? -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -A: Because it would be rarely used. llvm errors in such case and -prints a suggestion to use unsigned divide instead. - Q: Why BPF has implicit prologue and epilogue? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A: Because architectures like sparc have register windows and in general diff --git a/Documentation/bpf/bpf_devel_QA.rst b/Documentation/bpf/bpf_devel_QA.rst index 609b71f5747d..de27e1620821 100644 --- a/Documentation/bpf/bpf_devel_QA.rst +++ b/Documentation/bpf/bpf_devel_QA.rst @@ -635,12 +635,12 @@ test coverage. Q: clang flag for target bpf? ----------------------------- -Q: In some cases clang flag ``-target bpf`` is used but in other cases the +Q: In some cases clang flag ``--target=bpf`` is used but in other cases the default clang target, which matches the underlying architecture, is used. What is the difference and when I should use which? A: Although LLVM IR generation and optimization try to stay architecture -independent, ``-target <arch>`` still has some impact on generated code: +independent, ``--target=<arch>`` still has some impact on generated code: - BPF program may recursively include header file(s) with file scope inline assembly codes. The default target can handle this well, @@ -658,7 +658,7 @@ independent, ``-target <arch>`` still has some impact on generated code: The clang option ``-fno-jump-tables`` can be used to disable switch table generation. -- For clang ``-target bpf``, it is guaranteed that pointer or long / +- For clang ``--target=bpf``, it is guaranteed that pointer or long / unsigned long types will always have a width of 64 bit, no matter whether underlying clang binary or default target (or kernel) is 32 bit. However, when native clang target is used, then it will @@ -668,7 +668,7 @@ independent, ``-target <arch>`` still has some impact on generated code: while the BPF LLVM back end still operates in 64 bit. The native target is mostly needed in tracing for the case of walking ``pt_regs`` or other kernel structures where CPU's register width matters. - Otherwise, ``clang -target bpf`` is generally recommended. + Otherwise, ``clang --target=bpf`` is generally recommended. You should use default target when: @@ -685,7 +685,7 @@ when: into these structures is verified by the BPF verifier and may result in verification failures if the native architecture is not aligned with the BPF architecture, e.g. 64-bit. An example of this is - BPF_PROG_TYPE_SK_MSG require ``-target bpf`` + BPF_PROG_TYPE_SK_MSG require ``--target=bpf`` .. Links diff --git a/Documentation/bpf/btf.rst b/Documentation/bpf/btf.rst index 7cd7c5415a99..f32db1f44ae9 100644 --- a/Documentation/bpf/btf.rst +++ b/Documentation/bpf/btf.rst @@ -990,7 +990,7 @@ format.:: } g2; int main() { return 0; } int test() { return 0; } - -bash-4.4$ clang -c -g -O2 -target bpf t2.c + -bash-4.4$ clang -c -g -O2 --target=bpf t2.c -bash-4.4$ readelf -S t2.o ...... [ 8] .BTF PROGBITS 0000000000000000 00000247 @@ -1000,7 +1000,7 @@ format.:: [10] .rel.BTF.ext REL 0000000000000000 000007e0 0000000000000040 0000000000000010 16 9 8 ...... - -bash-4.4$ clang -S -g -O2 -target bpf t2.c + -bash-4.4$ clang -S -g -O2 --target=bpf t2.c -bash-4.4$ cat t2.s ...... .section .BTF,"",@progbits diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst index dbb39e8f9889..1ff177b89d66 100644 --- a/Documentation/bpf/index.rst +++ b/Documentation/bpf/index.rst @@ -12,9 +12,9 @@ that goes into great technical depth about the BPF Architecture. .. toctree:: :maxdepth: 1 - instruction-set verifier libbpf/index + standardization/index btf faq syscall_api @@ -29,7 +29,6 @@ that goes into great technical depth about the BPF Architecture. bpf_licensing test_debug clang-notes - linux-notes other redirect diff --git a/Documentation/bpf/llvm_reloc.rst b/Documentation/bpf/llvm_reloc.rst index e4a777a6a3a2..450e6403fe3d 100644 --- a/Documentation/bpf/llvm_reloc.rst +++ b/Documentation/bpf/llvm_reloc.rst @@ -28,7 +28,7 @@ For example, for the following code:: return g1 + g2 + l1 + l2; } -Compiled with ``clang -target bpf -O2 -c test.c``, the following is +Compiled with ``clang --target=bpf -O2 -c test.c``, the following is the code with ``llvm-objdump -dr test.o``:: 0: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll @@ -157,7 +157,7 @@ and ``call`` instructions. For example:: return gfunc(a, b) + lfunc(a, b) + global; } -Compiled with ``clang -target bpf -O2 -c test.c``, we will have +Compiled with ``clang --target=bpf -O2 -c test.c``, we will have following code with `llvm-objdump -dr test.o``:: Disassembly of section .text: @@ -203,7 +203,7 @@ The following is an example to show how R_BPF_64_ABS64 could be generated:: int global() { return 0; } struct t { void *g; } gbl = { global }; -Compiled with ``clang -target bpf -O2 -g -c test.c``, we will see a +Compiled with ``clang --target=bpf -O2 -g -c test.c``, we will see a relocation below in ``.data`` section with command ``llvm-readelf -r test.o``:: diff --git a/Documentation/bpf/standardization/index.rst b/Documentation/bpf/standardization/index.rst new file mode 100644 index 000000000000..09c6ba055fd7 --- /dev/null +++ b/Documentation/bpf/standardization/index.rst @@ -0,0 +1,18 @@ +.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) + +=================== +BPF Standardization +=================== + +This directory contains documents that are being iterated on as part of the BPF +standardization effort with the IETF. See the `IETF BPF Working Group`_ page +for the working group charter, documents, and more. + +.. toctree:: + :maxdepth: 1 + + instruction-set + linux-notes + +.. Links: +.. _IETF BPF Working Group: https://datatracker.ietf.org/wg/bpf/about/ diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/standardization/instruction-set.rst index 6644842cd3ea..4f73e9dc8d9e 100644 --- a/Documentation/bpf/instruction-set.rst +++ b/Documentation/bpf/standardization/instruction-set.rst @@ -10,9 +10,92 @@ This document specifies version 1.0 of the eBPF instruction set. Documentation conventions ========================= -For brevity, this document uses the type notion "u64", "u32", etc. -to mean an unsigned integer whose width is the specified number of bits, -and "s32", etc. to mean a signed integer of the specified number of bits. +For brevity and consistency, this document refers to families +of types using a shorthand syntax and refers to several expository, +mnemonic functions when describing the semantics of instructions. +The range of valid values for those types and the semantics of those +functions are defined in the following subsections. + +Types +----- +This document refers to integer types with the notation `SN` to specify +a type's signedness (`S`) and bit width (`N`), respectively. + +.. table:: Meaning of signedness notation. + + ==== ========= + `S` Meaning + ==== ========= + `u` unsigned + `s` signed + ==== ========= + +.. table:: Meaning of bit-width notation. + + ===== ========= + `N` Bit width + ===== ========= + `8` 8 bits + `16` 16 bits + `32` 32 bits + `64` 64 bits + `128` 128 bits + ===== ========= + +For example, `u32` is a type whose valid values are all the 32-bit unsigned +numbers and `s16` is a types whose valid values are all the 16-bit signed +numbers. + +Functions +--------- +* `htobe16`: Takes an unsigned 16-bit number in host-endian format and + returns the equivalent number as an unsigned 16-bit number in big-endian + format. +* `htobe32`: Takes an unsigned 32-bit number in host-endian format and + returns the equivalent number as an unsigned 32-bit number in big-endian + format. +* `htobe64`: Takes an unsigned 64-bit number in host-endian format and + returns the equivalent number as an unsigned 64-bit number in big-endian + format. +* `htole16`: Takes an unsigned 16-bit number in host-endian format and + returns the equivalent number as an unsigned 16-bit number in little-endian + format. +* `htole32`: Takes an unsigned 32-bit number in host-endian format and + returns the equivalent number as an unsigned 32-bit number in little-endian + format. +* `htole64`: Takes an unsigned 64-bit number in host-endian format and + returns the equivalent number as an unsigned 64-bit number in little-endian + format. +* `bswap16`: Takes an unsigned 16-bit number in either big- or little-endian + format and returns the equivalent number with the same bit width but + opposite endianness. +* `bswap32`: Takes an unsigned 32-bit number in either big- or little-endian + format and returns the equivalent number with the same bit width but + opposite endianness. +* `bswap64`: Takes an unsigned 64-bit number in either big- or little-endian + format and returns the equivalent number with the same bit width but + opposite endianness. + + +Definitions +----------- + +.. glossary:: + + Sign Extend + To `sign extend an` ``X`` `-bit number, A, to a` ``Y`` `-bit number, B ,` means to + + #. Copy all ``X`` bits from `A` to the lower ``X`` bits of `B`. + #. Set the value of the remaining ``Y`` - ``X`` bits of `B` to the value of + the most-significant bit of `A`. + +.. admonition:: Example + + Sign extend an 8-bit number ``A`` to a 16-bit number ``B`` on a big-endian platform: + :: + + A: 10000110 + B: 11111111 10000110 Registers and calling convention ================================ @@ -154,24 +237,27 @@ otherwise identical operations. The 'code' field encodes the operation as below, where 'src' and 'dst' refer to the values of the source and destination registers, respectively. -======== ===== ========================================================== -code value description -======== ===== ========================================================== -BPF_ADD 0x00 dst += src -BPF_SUB 0x10 dst -= src -BPF_MUL 0x20 dst \*= src -BPF_DIV 0x30 dst = (src != 0) ? (dst / src) : 0 -BPF_OR 0x40 dst \|= src -BPF_AND 0x50 dst &= src -BPF_LSH 0x60 dst <<= (src & mask) -BPF_RSH 0x70 dst >>= (src & mask) -BPF_NEG 0x80 dst = ~src -BPF_MOD 0x90 dst = (src != 0) ? (dst % src) : dst -BPF_XOR 0xa0 dst ^= src -BPF_MOV 0xb0 dst = src -BPF_ARSH 0xc0 sign extending dst >>= (src & mask) -BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below) -======== ===== ========================================================== +========= ===== ======= ========================================================== +code value offset description +========= ===== ======= ========================================================== +BPF_ADD 0x00 0 dst += src +BPF_SUB 0x10 0 dst -= src +BPF_MUL 0x20 0 dst \*= src +BPF_DIV 0x30 0 dst = (src != 0) ? (dst / src) : 0 +BPF_SDIV 0x30 1 dst = (src != 0) ? (dst s/ src) : 0 +BPF_OR 0x40 0 dst \|= src +BPF_AND 0x50 0 dst &= src +BPF_LSH 0x60 0 dst <<= (src & mask) +BPF_RSH 0x70 0 dst >>= (src & mask) +BPF_NEG 0x80 0 dst = -dst +BPF_MOD 0x90 0 dst = (src != 0) ? (dst % src) : dst +BPF_SMOD 0x90 1 dst = (src != 0) ? (dst s% src) : dst +BPF_XOR 0xa0 0 dst ^= src +BPF_MOV 0xb0 0 dst = src +BPF_MOVSX 0xb0 8/16/32 dst = (s8,s16,s32)src +BPF_ARSH 0xc0 0 :term:`sign extending<Sign Extend>` dst >>= (src & mask) +BPF_END 0xd0 0 byte swap operations (see `Byte swap instructions`_ below) +========= ===== ======= ========================================================== Underflow and overflow are allowed during arithmetic operations, meaning the 64-bit or 32-bit value will wrap. If eBPF program execution would @@ -198,47 +284,75 @@ where '(u32)' indicates that the upper 32 bits are zeroed. dst = dst ^ imm32 -Also note that the division and modulo operations are unsigned. Thus, for -``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas -for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result -interpreted as an unsigned 64-bit value. There are no instructions for -signed division or modulo. +Note that most instructions have instruction offset of 0. Only three instructions +(``BPF_SDIV``, ``BPF_SMOD``, ``BPF_MOVSX``) have a non-zero offset. + +The division and modulo operations support both unsigned and signed flavors. + +For unsigned operations (``BPF_DIV`` and ``BPF_MOD``), for ``BPF_ALU``, +'imm' is interpreted as a 32-bit unsigned value. For ``BPF_ALU64``, +'imm' is first :term:`sign extended<Sign Extend>` from 32 to 64 bits, and then +interpreted as a 64-bit unsigned value. + +For signed operations (``BPF_SDIV`` and ``BPF_SMOD``), for ``BPF_ALU``, +'imm' is interpreted as a 32-bit signed value. For ``BPF_ALU64``, 'imm' +is first :term:`sign extended<Sign Extend>` from 32 to 64 bits, and then +interpreted as a 64-bit signed value. + +The ``BPF_MOVSX`` instruction does a move operation with sign extension. +``BPF_ALU | BPF_MOVSX`` :term:`sign extends<Sign Extend>` 8-bit and 16-bit operands into 32 +bit operands, and zeroes the remaining upper 32 bits. +``BPF_ALU64 | BPF_MOVSX`` :term:`sign extends<Sign Extend>` 8-bit, 16-bit, and 32-bit +operands into 64 bit operands. Shift operations use a mask of 0x3F (63) for 64-bit operations and 0x1F (31) for 32-bit operations. Byte swap instructions -~~~~~~~~~~~~~~~~~~~~~~ +---------------------- -The byte swap instructions use an instruction class of ``BPF_ALU`` and a 4-bit -'code' field of ``BPF_END``. +The byte swap instructions use instruction classes of ``BPF_ALU`` and ``BPF_ALU64`` +and a 4-bit 'code' field of ``BPF_END``. The byte swap instructions operate on the destination register only and do not use a separate source register or immediate value. -The 1-bit source operand field in the opcode is used to select what byte -order the operation convert from or to: +For ``BPF_ALU``, the 1-bit source operand field in the opcode is used to +select what byte order the operation converts from or to. For +``BPF_ALU64``, the 1-bit source operand field in the opcode is reserved +and must be set to 0. -========= ===== ================================================= -source value description -========= ===== ================================================= -BPF_TO_LE 0x00 convert between host byte order and little endian -BPF_TO_BE 0x08 convert between host byte order and big endian -========= ===== ================================================= +========= ========= ===== ================================================= +class source value description +========= ========= ===== ================================================= +BPF_ALU BPF_TO_LE 0x00 convert between host byte order and little endian +BPF_ALU BPF_TO_BE 0x08 convert between host byte order and big endian +BPF_ALU64 Reserved 0x00 do byte swap unconditionally +========= ========= ===== ================================================= The 'imm' field encodes the width of the swap operations. The following widths are supported: 16, 32 and 64. Examples: -``BPF_ALU | BPF_TO_LE | BPF_END`` with imm = 16 means:: +``BPF_ALU | BPF_TO_LE | BPF_END`` with imm = 16/32/64 means:: dst = htole16(dst) + dst = htole32(dst) + dst = htole64(dst) -``BPF_ALU | BPF_TO_BE | BPF_END`` with imm = 64 means:: +``BPF_ALU | BPF_TO_BE | BPF_END`` with imm = 16/32/64 means:: + dst = htobe16(dst) + dst = htobe32(dst) dst = htobe64(dst) +``BPF_ALU64 | BPF_TO_LE | BPF_END`` with imm = 16/32/64 means:: + + dst = bswap16(dst) + dst = bswap32(dst) + dst = bswap64(dst) + Jump instructions ----------------- @@ -249,7 +363,8 @@ The 'code' field encodes the operation as below: ======== ===== === =========================================== ========================================= code value src description notes ======== ===== === =========================================== ========================================= -BPF_JA 0x0 0x0 PC += offset BPF_JMP only +BPF_JA 0x0 0x0 PC += offset BPF_JMP class +BPF_JA 0x0 0x0 PC += imm BPF_JMP32 class BPF_JEQ 0x1 any PC += offset if dst == src BPF_JGT 0x2 any PC += offset if dst > src unsigned BPF_JGE 0x3 any PC += offset if dst >= src unsigned @@ -278,6 +393,19 @@ Example: where 's>=' indicates a signed '>=' comparison. +``BPF_JA | BPF_K | BPF_JMP32`` (0x06) means:: + + gotol +imm + +where 'imm' means the branch offset comes from insn 'imm' field. + +Note that there are two flavors of ``BPF_JA`` instructions. The +``BPF_JMP`` class permits a 16-bit jump offset specified by the 'offset' +field, whereas the ``BPF_JMP32`` class permits a 32-bit jump offset +specified by the 'imm' field. A > 16-bit conditional jump may be +converted to a < 16-bit conditional jump plus a 32-bit unconditional +jump. + Helper functions ~~~~~~~~~~~~~~~~ @@ -320,6 +448,7 @@ The mode modifier is one of: BPF_ABS 0x20 legacy BPF packet access (absolute) `Legacy BPF Packet access instructions`_ BPF_IND 0x40 legacy BPF packet access (indirect) `Legacy BPF Packet access instructions`_ BPF_MEM 0x60 regular load and store operations `Regular load and store operations`_ + BPF_MEMSX 0x80 sign-extension load operations `Sign-extension load operations`_ BPF_ATOMIC 0xc0 atomic operations `Atomic operations`_ ============= ===== ==================================== ============= @@ -350,9 +479,23 @@ instructions that transfer data between a register and memory. ``BPF_MEM | <size> | BPF_LDX`` means:: - dst = *(size *) (src + offset) + dst = *(unsigned size *) (src + offset) + +Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW`` and +'unsigned size' is one of u8, u16, u32 or u64. + +Sign-extension load operations +------------------------------ + +The ``BPF_MEMSX`` mode modifier is used to encode :term:`sign-extension<Sign Extend>` load +instructions that transfer data between a register and memory. + +``BPF_MEMSX | <size> | BPF_LDX`` means:: + + dst = *(signed size *) (src + offset) -Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW``. +Where size is one of: ``BPF_B``, ``BPF_H`` or ``BPF_W``, and +'signed size' is one of s8, s16 or s32. Atomic operations ----------------- diff --git a/Documentation/bpf/linux-notes.rst b/Documentation/bpf/standardization/linux-notes.rst index 508d009d3bed..00d2693de025 100644 --- a/Documentation/bpf/linux-notes.rst +++ b/Documentation/bpf/standardization/linux-notes.rst @@ -45,7 +45,8 @@ On Linux, this integer is a BTF ID. Legacy BPF Packet access instructions ===================================== -As mentioned in the `ISA standard documentation <instruction-set.rst#legacy-bpf-packet-access-instructions>`_, +As mentioned in the `ISA standard documentation +<instruction-set.html#legacy-bpf-packet-access-instructions>`_, Linux has special eBPF instructions for access to packet data that have been carried over from classic BPF to retain the performance of legacy socket filters running in the eBPF interpreter. diff --git a/Documentation/core-api/cachetlb.rst b/Documentation/core-api/cachetlb.rst index 5c0552e78c58..889fc84ccd1b 100644 --- a/Documentation/core-api/cachetlb.rst +++ b/Documentation/core-api/cachetlb.rst @@ -88,13 +88,17 @@ changes occur: This is used primarily during fault processing. -5) ``void update_mmu_cache(struct vm_area_struct *vma, - unsigned long address, pte_t *ptep)`` +5) ``void update_mmu_cache_range(struct vm_fault *vmf, + struct vm_area_struct *vma, unsigned long address, pte_t *ptep, + unsigned int nr)`` - At the end of every page fault, this routine is invoked to - tell the architecture specific code that a translation - now exists at virtual address "address" for address space - "vma->vm_mm", in the software page tables. + At the end of every page fault, this routine is invoked to tell + the architecture specific code that translations now exists + in the software page tables for address space "vma->vm_mm" + at virtual address "address" for "nr" consecutive pages. + + This routine is also invoked in various other places which pass + a NULL "vmf". A port may use this information in any way it so chooses. For example, it could use this event to pre-load TLB @@ -269,7 +273,7 @@ maps this page at its virtual address. If D-cache aliasing is not an issue, these two routines may simply call memcpy/memset directly and do nothing more. - ``void flush_dcache_page(struct page *page)`` + ``void flush_dcache_folio(struct folio *folio)`` This routines must be called when: @@ -277,7 +281,7 @@ maps this page at its virtual address. and / or in high memory b) the kernel is about to read from a page cache page and user space shared/writable mappings of this page potentially exist. Note - that {get,pin}_user_pages{_fast} already call flush_dcache_page + that {get,pin}_user_pages{_fast} already call flush_dcache_folio on any page found in the user address space and thus driver code rarely needs to take this into account. @@ -291,7 +295,7 @@ maps this page at its virtual address. The phrase "kernel writes to a page cache page" means, specifically, that the kernel executes store instructions that dirty data in that - page at the page->virtual mapping of that page. It is important to + page at the kernel virtual mapping of that page. It is important to flush here to handle D-cache aliasing, to make sure these kernel stores are visible to user space mappings of that page. @@ -302,21 +306,22 @@ maps this page at its virtual address. If D-cache aliasing is not an issue, this routine may simply be defined as a nop on that architecture. - There is a bit set aside in page->flags (PG_arch_1) as "architecture + There is a bit set aside in folio->flags (PG_arch_1) as "architecture private". The kernel guarantees that, for pagecache pages, it will clear this bit when such a page first enters the pagecache. - This allows these interfaces to be implemented much more efficiently. - It allows one to "defer" (perhaps indefinitely) the actual flush if - there are currently no user processes mapping this page. See sparc64's - flush_dcache_page and update_mmu_cache implementations for an example - of how to go about doing this. + This allows these interfaces to be implemented much more + efficiently. It allows one to "defer" (perhaps indefinitely) the + actual flush if there are currently no user processes mapping this + page. See sparc64's flush_dcache_folio and update_mmu_cache_range + implementations for an example of how to go about doing this. - The idea is, first at flush_dcache_page() time, if page_file_mapping() - returns a mapping, and mapping_mapped on that mapping returns %false, - just mark the architecture private page flag bit. Later, in - update_mmu_cache(), a check is made of this flag bit, and if set the - flush is done and the flag bit is cleared. + The idea is, first at flush_dcache_folio() time, if + folio_flush_mapping() returns a mapping, and mapping_mapped() on that + mapping returns %false, just mark the architecture private page + flag bit. Later, in update_mmu_cache_range(), a check is made + of this flag bit, and if set the flush is done and the flag bit + is cleared. .. important:: @@ -326,12 +331,6 @@ maps this page at its virtual address. dirty. Again, see sparc64 for examples of how to deal with this. - ``void flush_dcache_folio(struct folio *folio)`` - This function is called under the same circumstances as - flush_dcache_page(). It allows the architecture to - optimise for flushing the entire folio of pages instead - of flushing one page at a time. - ``void copy_to_user_page(struct vm_area_struct *vma, struct page *page, unsigned long user_vaddr, void *dst, void *src, int len)`` ``void copy_from_user_page(struct vm_area_struct *vma, struct page *page, @@ -352,7 +351,7 @@ maps this page at its virtual address. When the kernel needs to access the contents of an anonymous page, it calls this function (currently only - get_user_pages()). Note: flush_dcache_page() deliberately + get_user_pages()). Note: flush_dcache_folio() deliberately doesn't work for an anonymous page. The default implementation is a nop (and should remain so for all coherent architectures). For incoherent architectures, it should flush @@ -369,7 +368,7 @@ maps this page at its virtual address. ``void flush_icache_page(struct vm_area_struct *vma, struct page *page)`` All the functionality of flush_icache_page can be implemented in - flush_dcache_page and update_mmu_cache. In the future, the hope + flush_dcache_folio and update_mmu_cache_range. In the future, the hope is to remove this interface completely. The final category of APIs is for I/O to deliberately aliased address diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst index e6f5bc39cf5c..9511e405aabd 100644 --- a/Documentation/core-api/cpu_hotplug.rst +++ b/Documentation/core-api/cpu_hotplug.rst @@ -395,8 +395,8 @@ multi-instance state the following function is available: * cpuhp_setup_state_multi(state, name, startup, teardown) The @state argument is either a statically allocated state or one of the -constants for dynamically allocated states - CPUHP_PREPARE_DYN, -CPUHP_ONLINE_DYN - depending on the state section (PREPARE, ONLINE) for +constants for dynamically allocated states - CPUHP_BP_PREPARE_DYN, +CPUHP_AP_ONLINE_DYN - depending on the state section (PREPARE, ONLINE) for which a dynamic state should be allocated. The @name argument is used for sysfs output and for instrumentation. The @@ -588,7 +588,7 @@ notifications on online and offline operations:: Setup and teardown a dynamically allocated state in the ONLINE section for notifications on offline operations:: - state = cpuhp_setup_state(CPUHP_ONLINE_DYN, "subsys:offline", NULL, subsys_cpu_offline); + state = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "subsys:offline", NULL, subsys_cpu_offline); if (state < 0) return state; .... @@ -597,7 +597,7 @@ for notifications on offline operations:: Setup and teardown a dynamically allocated state in the ONLINE section for notifications on online operations without invoking the callbacks:: - state = cpuhp_setup_state_nocalls(CPUHP_ONLINE_DYN, "subsys:online", subsys_cpu_online, NULL); + state = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "subsys:online", subsys_cpu_online, NULL); if (state < 0) return state; .... @@ -606,7 +606,7 @@ for notifications on online operations without invoking the callbacks:: Setup, use and teardown a dynamically allocated multi-instance state in the ONLINE section for notifications on online and offline operation:: - state = cpuhp_setup_state_multi(CPUHP_ONLINE_DYN, "subsys:online", subsys_cpu_online, subsys_cpu_offline); + state = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "subsys:online", subsys_cpu_online, subsys_cpu_offline); if (state < 0) return state; .... @@ -741,6 +741,24 @@ will receive all events. A script like:: can process the event further. +When changes to the CPUs in the system occur, the sysfs file +/sys/devices/system/cpu/crash_hotplug contains '1' if the kernel +updates the kdump capture kernel list of CPUs itself (via elfcorehdr), +or '0' if userspace must update the kdump capture kernel list of CPUs. + +The availability depends on the CONFIG_HOTPLUG_CPU kernel configuration +option. + +To skip userspace processing of CPU hot un/plug events for kdump +(i.e. the unload-then-reload to obtain a current list of CPUs), this sysfs +file can be used in a udev rule as follows: + + SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" + +For a CPU hot un/plug event, if the architecture supports kernel updates +of the elfcorehdr (which contains the list of CPUs), then the rule skips +the unload-then-reload of the kdump capture kernel. + Kernel Inline Documentations Reference ====================================== diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index f2bcc5a7ea43..ae92a2571388 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -162,8 +162,10 @@ Base 2 log and power Functions .. kernel-doc:: include/linux/log2.h :internal: -Integer power Functions ------------------------ +Integer log and power Functions +------------------------------- + +.. kernel-doc:: include/linux/int_log.h .. kernel-doc:: lib/math/int_pow.c :export: diff --git a/Documentation/core-api/mm-api.rst b/Documentation/core-api/mm-api.rst index f5dde5bceaea..2d091c873d1e 100644 --- a/Documentation/core-api/mm-api.rst +++ b/Documentation/core-api/mm-api.rst @@ -115,3 +115,28 @@ More Memory Management Functions .. kernel-doc:: include/linux/mmzone.h .. kernel-doc:: mm/util.c :functions: folio_mapping + +.. kernel-doc:: mm/rmap.c +.. kernel-doc:: mm/migrate.c +.. kernel-doc:: mm/mmap.c +.. kernel-doc:: mm/kmemleak.c +.. #kernel-doc:: mm/hmm.c (build warnings) +.. kernel-doc:: mm/memremap.c +.. kernel-doc:: mm/hugetlb.c +.. kernel-doc:: mm/swap.c +.. kernel-doc:: mm/zpool.c +.. kernel-doc:: mm/memcontrol.c +.. #kernel-doc:: mm/memory-tiers.c (build warnings) +.. kernel-doc:: mm/shmem.c +.. kernel-doc:: mm/migrate_device.c +.. #kernel-doc:: mm/nommu.c (duplicates kernel-doc from other files) +.. kernel-doc:: mm/mapping_dirty_helpers.c +.. #kernel-doc:: mm/memory-failure.c (build warnings) +.. kernel-doc:: mm/percpu.c +.. kernel-doc:: mm/maccess.c +.. kernel-doc:: mm/vmscan.c +.. kernel-doc:: mm/memory_hotplug.c +.. kernel-doc:: mm/mmu_notifier.c +.. kernel-doc:: mm/balloon_compaction.c +.. kernel-doc:: mm/huge_memory.c +.. kernel-doc:: mm/io-mapping.c diff --git a/Documentation/core-api/netlink.rst b/Documentation/core-api/netlink.rst index e4a938a05cc9..9f692b02bfe6 100644 --- a/Documentation/core-api/netlink.rst +++ b/Documentation/core-api/netlink.rst @@ -67,10 +67,11 @@ Globals kernel-policy ~~~~~~~~~~~~~ -Defines if the kernel validation policy is per operation (``per-op``) -or for the entire family (``global``). New families should use ``per-op`` -(default) to be able to narrow down the attributes accepted by a specific -command. +Defines whether the kernel validation policy is ``global`` i.e. the same for all +operations of the family, defined for each operation individually - ``per-op``, +or separately for each operation and operation type (do vs dump) - ``split``. +New families should use ``per-op`` (default) to be able to narrow down the +attributes accepted by a specific command. checks ------ diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst index dafe8eb28d30..19ddf5e07013 100644 --- a/Documentation/dev-tools/kunit/run_wrapper.rst +++ b/Documentation/dev-tools/kunit/run_wrapper.rst @@ -321,3 +321,15 @@ command line arguments: - ``--json``: If set, stores the test results in a JSON format and prints to `stdout` or saves to a file if a filename is specified. + +- ``--filter``: Specifies filters on test attributes, for example, ``speed!=slow``. + Multiple filters can be used by wrapping input in quotes and separating filters + by commas. Example: ``--filter "speed>slow, module=example"``. + +- ``--filter_action``: If set to ``skip``, filtered tests will be shown as skipped + in the output rather than showing no output. + +- ``--list_tests``: If set, lists all tests that will be run. + +- ``--list_tests_attr``: If set, lists all tests that will be run and all of their + attributes. diff --git a/Documentation/dev-tools/kunit/running_tips.rst b/Documentation/dev-tools/kunit/running_tips.rst index 8e8c493f17d1..766f9cdea0fa 100644 --- a/Documentation/dev-tools/kunit/running_tips.rst +++ b/Documentation/dev-tools/kunit/running_tips.rst @@ -262,3 +262,169 @@ other code executed during boot, e.g. # Reset coverage counters before running the test. $ echo 0 > /sys/kernel/debug/gcov/reset $ modprobe kunit-example-test + + +Test Attributes and Filtering +============================= + +Test suites and cases can be marked with test attributes, such as speed of +test. These attributes will later be printed in test output and can be used to +filter test execution. + +Marking Test Attributes +----------------------- + +Tests are marked with an attribute by including a ``kunit_attributes`` object +in the test definition. + +Test cases can be marked using the ``KUNIT_CASE_ATTR(test_name, attributes)`` +macro to define the test case instead of ``KUNIT_CASE(test_name)``. + +.. code-block:: c + + static const struct kunit_attributes example_attr = { + .speed = KUNIT_VERY_SLOW, + }; + + static struct kunit_case example_test_cases[] = { + KUNIT_CASE_ATTR(example_test, example_attr), + }; + +.. note:: + To mark a test case as slow, you can also use ``KUNIT_CASE_SLOW(test_name)``. + This is a helpful macro as the slow attribute is the most commonly used. + +Test suites can be marked with an attribute by setting the "attr" field in the +suite definition. + +.. code-block:: c + + static const struct kunit_attributes example_attr = { + .speed = KUNIT_VERY_SLOW, + }; + + static struct kunit_suite example_test_suite = { + ..., + .attr = example_attr, + }; + +.. note:: + Not all attributes need to be set in a ``kunit_attributes`` object. Unset + attributes will remain uninitialized and act as though the attribute is set + to 0 or NULL. Thus, if an attribute is set to 0, it is treated as unset. + These unset attributes will not be reported and may act as a default value + for filtering purposes. + +Reporting Attributes +-------------------- + +When a user runs tests, attributes will be present in the raw kernel output (in +KTAP format). Note that attributes will be hidden by default in kunit.py output +for all passing tests but the raw kernel output can be accessed using the +``--raw_output`` flag. This is an example of how test attributes for test cases +will be formatted in kernel output: + +.. code-block:: none + + # example_test.speed: slow + ok 1 example_test + +This is an example of how test attributes for test suites will be formatted in +kernel output: + +.. code-block:: none + + KTAP version 2 + # Subtest: example_suite + # module: kunit_example_test + 1..3 + ... + ok 1 example_suite + +Additionally, users can output a full attribute report of tests with their +attributes, using the command line flag ``--list_tests_attr``: + +.. code-block:: bash + + kunit.py run "example" --list_tests_attr + +.. note:: + This report can be accessed when running KUnit manually by passing in the + module_param ``kunit.action=list_attr``. + +Filtering +--------- + +Users can filter tests using the ``--filter`` command line flag when running +tests. As an example: + +.. code-block:: bash + + kunit.py run --filter speed=slow + + +You can also use the following operations on filters: "<", ">", "<=", ">=", +"!=", and "=". Example: + +.. code-block:: bash + + kunit.py run --filter "speed>slow" + +This example will run all tests with speeds faster than slow. Note that the +characters < and > are often interpreted by the shell, so they may need to be +quoted or escaped, as above. + +Additionally, you can use multiple filters at once. Simply separate filters +using commas. Example: + +.. code-block:: bash + + kunit.py run --filter "speed>slow, module=kunit_example_test" + +.. note:: + You can use this filtering feature when running KUnit manually by passing + the filter as a module param: ``kunit.filter="speed>slow, speed<=normal"``. + +Filtered tests will not run or show up in the test output. You can use the +``--filter_action=skip`` flag to skip filtered tests instead. These tests will be +shown in the test output in the test but will not run. To use this feature when +running KUnit manually, use the module param ``kunit.filter_action=skip``. + +Rules of Filtering Procedure +---------------------------- + +Since both suites and test cases can have attributes, there may be conflicts +between attributes during filtering. The process of filtering follows these +rules: + +- Filtering always operates at a per-test level. + +- If a test has an attribute set, then the test's value is filtered on. + +- Otherwise, the value falls back to the suite's value. + +- If neither are set, the attribute has a global "default" value, which is used. + +List of Current Attributes +-------------------------- + +``speed`` + +This attribute indicates the speed of a test's execution (how slow or fast the +test is). + +This attribute is saved as an enum with the following categories: "normal", +"slow", or "very_slow". The assumed default speed for tests is "normal". This +indicates that the test takes a relatively trivial amount of time (less than +1 second), regardless of the machine it is running on. Any test slower than +this could be marked as "slow" or "very_slow". + +The macro ``KUNIT_CASE_SLOW(test_name)`` can be easily used to set the speed +of a test case to "slow". + +``module`` + +This attribute indicates the name of the module associated with the test. + +This attribute is automatically saved as a string and is printed for each suite. +Tests can also be filtered using this attribute. diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint index 4abe9f0a1d46..fea5231e1320 100644 --- a/Documentation/devicetree/bindings/.yamllint +++ b/Documentation/devicetree/bindings/.yamllint @@ -1,6 +1,11 @@ extends: relaxed rules: + quoted-strings: + required: only-when-needed + extra-allowed: + - '[$^,[]' + - '^/$' line-length: # 80 chars should be enough, but don't fail if a line is longer max: 110 diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 08d59842655c..1c1094cd6b77 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -218,6 +218,14 @@ properties: - amlogic,aq222 - const: amlogic,s4 + - description: Boards with the Amlogic T7 A311D2 SoC + items: + - enum: + - amlogic,an400 + - khadas,vim4 + - const: amlogic,a311d2 + - const: amlogic,t7 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index d6c84b6e7fe6..6216cfb0a188 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2019 Linaro Ltd. %YAML 1.2 --- diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml index cb78cfa56702..c960c8e0a9a5 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml# diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml index 5fedaed49a1f..6745b4cc8f1c 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml# diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml index 108460627d9a..f725e6940993 100644 --- a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml @@ -1,9 +1,9 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2021, Arm Ltd %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Embedded Trace Extensions diff --git a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml index b1322658063a..87128e7b7d28 100644 --- a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml @@ -1,9 +1,9 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright 2021, Arm Ltd %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Trace Buffer Extensions @@ -19,7 +19,8 @@ description: | properties: $nodename: - const: "trbe" + const: trbe + compatible: items: - const: arm,trace-buffer-extension diff --git a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml index 491eef1e1b10..3b060c36b90c 100644 --- a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml +++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/arm,versatile-sysreg.yaml# diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index cdd65881fcdd..8dd6b6446394 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -143,7 +143,7 @@ patternProperties: "simple-bus". If the compatible is placed in the "motherboard-bus" node, it is stricter and always has two compatibles. type: object - $ref: '/schemas/simple-bus.yaml' + $ref: /schemas/simple-bus.yaml unevaluatedProperties: false properties: diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml index c72aab706484..b8c5cacb09bd 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml @@ -2,8 +2,8 @@ # Copyright 2021 Joel Stanley, IBM Corp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ASPEED Secure Boot Controller diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index e0eff4c05879..68f717670f78 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# @@ -79,9 +79,11 @@ properties: - facebook,elbert-bmc - facebook,fuji-bmc - facebook,greatlakes-bmc + - facebook,yosemite4-bmc - ibm,everest-bmc - ibm,rainier-bmc - ibm,tacoma-bmc + - inventec,starscream-bmc - inventec,transformer-bmc - jabil,rbp-bmc - qcom,dc-scm-v1-bmc diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 5c3ac97e8728..4cc4e6754681 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -66,6 +66,7 @@ properties: - description: BCM47094 based boards items: - enum: + - asus,rt-ac3100 - asus,rt-ac88u - dlink,dir-885l - dlink,dir-890l diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml new file mode 100644 index 000000000000..81b9a4a641c1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm53573.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM53573 SoCs family + +description: + Broadcom BCM53573 / BCM47189 Wi-Fi SoCs derived from Northstar. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM53573 based boards + items: + - enum: + - tenda,ac6-v1 + - tenda,w15e-v1 + - const: brcm,bcm53573 + + - description: BCM47189 based boards + items: + - enum: + - brcm,bcm947189acdbmr + - luxul,xap-810-v1 + - luxul,xap-1440-v1 + - tenda,ac9 + - const: brcm,bcm47189 + - const: brcm,bcm53573 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 9e6a45eea4e5..0d17cbad9778 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -143,8 +143,10 @@ properties: - arm,cortex-a78ae - arm,cortex-a78c - arm,cortex-a510 + - arm,cortex-a520 - arm,cortex-a710 - arm,cortex-a715 + - arm,cortex-a720 - arm,cortex-m0 - arm,cortex-m0+ - arm,cortex-m1 @@ -158,6 +160,7 @@ properties: - arm,cortex-x1c - arm,cortex-x2 - arm,cortex-x3 + - arm,cortex-x4 - arm,neoverse-e1 - arm,neoverse-n1 - arm,neoverse-n2 diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml index 9d1857c0aa07..e3980b659f63 100644 --- a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml +++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Trusted Foundations diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 2510eaa8906d..9450b2c8a678 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -909,6 +909,7 @@ properties: - fsl,imx8mm-evk # i.MX8MM EVK Board - fsl,imx8mm-evkb # i.MX8MM EVKB Board - gateworks,imx8mm-gw7904 + - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit @@ -1031,10 +1032,11 @@ properties: - beacon,imx8mp-beacon-kit # i.MX8MP Beacon Development Kit - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC - fsl,imx8mp-evk # i.MX8MP EVK Board + - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board + - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board + - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board - - polyhex,imx8mp-debix # Polyhex Debix boards - - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules @@ -1068,6 +1070,20 @@ properties: - const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM - const: fsl,imx8mp + - description: Polyhex DEBIX i.MX8MP based SBCs + items: + - enum: + - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board + - const: polyhex,imx8mp-debix # Polyhex i.MX8MP Debix SBCs + - const: fsl,imx8mp + + - description: Polyhex DEBIX i.MX8MP SOM A based boards + items: + - enum: + - polyhex,imx8mp-debix-som-a-bmb-08 # Polyhex Debix SOM A on SOM A I/O board + - const: polyhex,imx8mp-debix-som-a # Polyhex Debix SOM A + - const: fsl,imx8mp + - description: Toradex Boards with Verdin iMX8M Plus Modules items: - enum: @@ -1220,11 +1236,30 @@ properties: - const: fsl,imxrt1170 - description: + TQMa93xxLA and TQMa93xxCA are two series of feature compatible SOM + using NXP i.MX93 SOC in 11x11 mm package. + TQMa93xxLA is designed to be soldered on different carrier boards. + TQMa93xxCA is a compatible variant using board to board connectors. + All SOM and CPU variants use the same device tree hence only one + compatible is needed. Bootloader disables all features not present + in the assembled SOC. + MBa93xxCA mainboard can be used as starterkit for the SOM + soldered on an adapter board or for the connector variant + MBa93xxLA mainboard is a single board computer using the solderable + SOM variant + items: + - enum: + - tq,imx93-tqma9352-mba93xxca # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM on MBa93xxCA + - tq,imx93-tqma9352-mba93xxla # TQ-Systems GmbH i.MX93 TQMa93xxLA SOM on MBa93xxLA SBC + - const: tq,imx93-tqma9352 # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM + - const: fsl,imx93 + + - description: Freescale Vybrid Platform Device Tree Bindings - For the Vybrid SoC familiy all variants with DDR controller are supported, + For the Vybrid SoC family all variants with DDR controller are supported, which is the VF5xx and VF6xx series. Out of historical reasons, in most - places the kernel uses vf610 to refer to the whole familiy. + places the kernel uses vf610 to refer to the whole family. The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 core support. items: @@ -1289,6 +1324,16 @@ properties: - fsl,ls1021a-twr - const: fsl,ls1021a + - description: + TQ-Systems TQMLS102xA is a series of socketable SOM featuring + LS102x system-on-chip variants. MBLS102xA mainboard can be used as + starterkit. + items: + - enum: + - tq,ls1021a-tqmls1021a-mbls102xa + - const: tq,ls1021a-tqmls1021a + - const: fsl,ls1021a + - description: LS1028A based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml index 528dad4cde3c..4fc208d3995e 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml @@ -29,6 +29,26 @@ properties: ranges: true +patternProperties: + "^clock@[0-9a-f]+$": + type: object + additionalProperties: false + + properties: + compatible: + const: hisilicon,hix5hd2-clock + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + required: + - compatible + - reg + - "#clock-cells" + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml index 4b4dcf551eb6..2ee0c740eb56 100644 --- a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml +++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml @@ -21,6 +21,11 @@ properties: - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex + - description: Agilex5 boards + items: + - enum: + - intel,socfpga-agilex5-socdk + - const: intel,socfpga-agilex5 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml index ff378d5cbd32..4a323e8c785d 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml# diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index 86b59de7707e..c24ad0968f3e 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml# diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index d84105c7c935..9d5d70c98058 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -21,13 +21,13 @@ The Device Tree node representing this System Controller 0 provides a number of clocks: - a set of core clocks - - a set of gatable clocks + - a set of gateable clocks Those clocks can be referenced by other Device Tree nodes using two cells: - The first cell must be 0 or 1. 0 for the core clocks and 1 for the - gatable clocks. - - The second cell identifies the particular core clock or gatable + gateable clocks. + - The second cell identifies the particular core clock or gateable clocks. The following clocks are available: @@ -38,7 +38,7 @@ The following clocks are available: - 0 3 Core - 0 4 NAND core - 0 5 SDIO core - - Gatable clocks + - Gateable clocks - 1 0 Audio - 1 1 Comm Unit - 1 2 NAND diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt index 8be5978f388d..1c671943ce4d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt @@ -16,7 +16,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h. The mipi0a controller also uses the common power domain from Documentation/devicetree/bindings/soc/mediatek/scpsys.txt -The available power doamins are defined in dt-bindings/power/mt*-power.h. +The available power domains are defined in dt-bindings/power/mt*-power.h. Example: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt index c877bcc1a5c5..f090147b7f1e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt @@ -15,7 +15,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h. The vcodecsys controller also uses the common power domain from Documentation/devicetree/bindings/soc/mediatek/scpsys.txt -The available power doamins are defined in dt-bindings/power/mt*-power.h. +The available power domains are defined in dt-bindings/power/mt*-power.h. Example: diff --git a/Documentation/devicetree/bindings/arm/msm/ssbi.txt b/Documentation/devicetree/bindings/arm/msm/ssbi.txt deleted file mode 100644 index 54fd5ced3401..000000000000 --- a/Documentation/devicetree/bindings/arm/msm/ssbi.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Qualcomm SSBI - -Some Qualcomm MSM devices contain a point-to-point serial bus used to -communicate with a limited range of devices (mostly power management -chips). - -These require the following properties: - -- compatible: "qcom,ssbi" - -- qcom,controller-type - indicates the SSBI bus variant the controller should use to talk - with the slave device. This should be one of "ssbi", "ssbi2", or - "pmic-arbiter". The type chosen is determined by the attached - slave. - -The slave device should be the single child node of the ssbi device -with a compatible field. diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml index 6816bd68f9cf..a8ac4a2d672d 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml @@ -2,8 +2,8 @@ # Copyright 2020 thingy.jp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MStar/SigmaStar Armv7 SoC l3bridge diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml index 599c65980f5d..5739848000b1 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml @@ -2,8 +2,8 @@ # Copyright 2020 thingy.jp. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MStar/SigmaStar Armv7 SoC SMP control registers diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index f35b77920786..0ce6665df4a2 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -8,7 +8,7 @@ control module driver itself. See [2] for documentation about clock/clockdomain nodes. -[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml [2] Documentation/devicetree/bindings/clock/ti/* Required properties: diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index fa8b31660cad..c863ec07cbbb 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -41,14 +41,6 @@ SoC Type (optional): SoC Families: -- OMAP2 generic - defaults to OMAP2420 - compatible = "ti,omap2" -- OMAP3 generic - compatible = "ti,omap3" -- OMAP4 generic - defaults to OMAP4430 - compatible = "ti,omap4" -- OMAP5 generic - defaults to OMAP5430 - compatible = "ti,omap5" - DRA7 generic - defaults to DRA742 compatible = "ti,dra7" - AM33x generic @@ -58,32 +50,6 @@ SoC Families: SoCs: -- OMAP2420 - compatible = "ti,omap2420", "ti,omap2" -- OMAP2430 - compatible = "ti,omap2430", "ti,omap2" - -- OMAP3430 - compatible = "ti,omap3430", "ti,omap3" - legacy: "ti,omap34xx" - please do not use any more -- AM3517 - compatible = "ti,am3517", "ti,omap3" -- OMAP3630 - compatible = "ti,omap3630", "ti,omap3" - legacy: "ti,omap36xx" - please do not use any more -- AM335x - compatible = "ti,am33xx" - -- OMAP4430 - compatible = "ti,omap4430", "ti,omap4" -- OMAP4460 - compatible = "ti,omap4460", "ti,omap4" - -- OMAP5430 - compatible = "ti,omap5430", "ti,omap5" -- OMAP5432 - compatible = "ti,omap5432", "ti,omap5" - - DRA762 compatible = "ti,dra762", "ti,dra7" @@ -116,65 +82,6 @@ SoCs: Boards (incomplete list of examples): -- OMAP3 BeagleBoard : Low cost community board - compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" - -- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk - compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3" - -- OMAP3 Tobi with Overo : Commercial expansion board with daughter board - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" - -- OMAP4 SDP : Software Development Board - compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4" - -- OMAP4 PandaBoard : Low cost community board - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4" - -- OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board - compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; - -- OMAP4 VAR-STK-OM44 : Commercial dev kit with VAR-OM44CustomBoard and VAR-SOM-OM44 w/WLAN - compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; - -- OMAP4 VAR-DVK-OM44 : Commercial dev kit with VAR-OM44CustomBoard, VAR-SOM-OM44 w/WLAN and LCD touchscreen - compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; - -- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x - compatible = "ti,omap3-evm", "ti,omap3630", "ti,omap3" - -- AM335X EVM : Software Development Board for AM335x - compatible = "ti,am335x-evm", "ti,am33xx" - -- AM335X Bone : Low cost community board - compatible = "ti,am335x-bone", "ti,am33xx" - -- AM3359 ICEv2 : Low cost Industrial Communication Engine EVM. - compatible = "ti,am3359-icev2", "ti,am33xx" - -- AM335X OrionLXm : Substation Automation Platform - compatible = "novatech,am335x-lxm", "ti,am33xx" - -- AM335X phyBOARD-WEGA: Single Board Computer dev kit - compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx" - -- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4 - compatible = "compulab,cm-t335", "ti,am33xx" - -- AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4 - compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx" - -- AM335X phyCORE-AM335x: Development kit - compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx" - -- AM335x phyBOARD-REGOR: Single Board Computer - compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx" - -- AM335X UC-8100-ME-T: Communication-centric industrial computing platform - compatible = "moxa,uc-8100-me-t", "ti,am33xx"; - -- OMAP5 EVM : Evaluation Module - compatible = "ti,omap5-evm", "ti,omap5" - AM437x CM-T43 compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43" @@ -217,9 +124,3 @@ Boards (incomplete list of examples): - DRA718 EVM: Software Development Board for DRA718 compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7" - -- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3" - -- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3" diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index e14358bf0b9c..99b5e9530707 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -49,9 +49,14 @@ properties: - arm,cortex-a77-pmu - arm,cortex-a78-pmu - arm,cortex-a510-pmu + - arm,cortex-a520-pmu - arm,cortex-a710-pmu + - arm,cortex-a715-pmu + - arm,cortex-a720-pmu - arm,cortex-x1-pmu - arm,cortex-x2-pmu + - arm,cortex-x3-pmu + - arm,cortex-x4-pmu - arm,neoverse-e1-pmu - arm,neoverse-n1-pmu - arm,neoverse-n2-pmu diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml index 2ec9b5b24d73..ea3c5db6b52d 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. %YAML 1.2 --- diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 5c08342664ea..3bad47b7b02b 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. %YAML 1.2 --- diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml index e333ec4a9c5f..97621c92a1ab 100644 --- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -31,7 +31,7 @@ properties: compatible: oneOf: # Preferred naming style for compatibles of SoC components: - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$" + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$" - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" # Legacy namings - variations of existing patterns/compatibles are OK, diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 450f616774e0..adbfaea32343 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -30,6 +30,7 @@ description: | apq8084 apq8096 ipq4018 + ipq5018 ipq5332 ipq6018 ipq8074 @@ -72,6 +73,7 @@ description: | sdx65 sdx75 sm4250 + sm4450 sm6115 sm6115p sm6125 @@ -104,6 +106,7 @@ description: | hk10-c2 idp liquid + rdp432-c2 mtp qrd rb2 @@ -186,6 +189,7 @@ properties: - items: - enum: + - samsung,a7 - sony,kanuti-tulip - square,apq8039-t2 - const: qcom,msm8939 @@ -341,6 +345,11 @@ properties: - items: - enum: + - qcom,ipq5018-rdp432-c2 + - const: qcom,ipq5018 + + - items: + - enum: - qcom,ipq5332-ap-mi01.2 - qcom,ipq5332-ap-mi01.3 - qcom,ipq5332-ap-mi01.6 @@ -904,6 +913,11 @@ properties: - items: - enum: + - qcom,sm4450-qrd + - const: qcom,sm4450 + + - items: + - enum: - fxtec,pro1x - const: qcom,sm6115 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index ecdb72a519cb..ca5389862887 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -196,6 +196,11 @@ properties: - const: firefly,rk3566-roc-pc - const: rockchip,rk3566 + - description: Firefly Station P2 + items: + - const: firefly,rk3568-roc-pc + - const: rockchip,rk3568 + - description: FriendlyElec NanoPi R2 series boards items: - enum: @@ -222,6 +227,11 @@ properties: - friendlyarm,nanopi-r5s - const: rockchip,rk3568 + - description: FriendlyElec NanoPC T6 + items: + - const: friendlyarm,nanopc-t6 + - const: rockchip,rk3588 + - description: GeekBuying GeekBox items: - const: geekbuying,geekbox @@ -694,6 +704,11 @@ properties: - const: radxa,rock-4c-plus - const: rockchip,rk3399 + - description: Radxa ROCK 4SE + items: + - const: radxa,rock-4se + - const: rockchip,rk3399 + - description: Radxa ROCK Pi E items: - const: radxa,rockpi-e diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 2297ad3f4774..d2dce238ff5d 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 ML-AHB interconnect diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index b63ff591ef8f..d083d8ad48b7 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 Platforms System Controller diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 4466b455bffa..4bf28e717a56 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -143,7 +143,9 @@ properties: - description: Octavo OSD32MP15x System-in-Package based boards items: - enum: - - lxa,stm32mp157c-mc1 # Linux Automation MC-1 + - lxa,stm32mp157c-mc1 # Linux Automation MC-1 + - lxa,stm32mp157c-tac-gen1 # Linux Automation TAC (Generation 1) + - lxa,stm32mp157c-tac-gen2 # Linux Automation TAC (Generation 2) - const: oct,stm32mp15xx-osd32 - enum: - st,stm32mp157 diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index ee8fdd2da869..e4dd678f4212 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -541,13 +541,13 @@ properties: - const: msi,primo81 - const: allwinner,sun6i-a31s - - description: Emlid Neutis N5 Developper Board + - description: Emlid Neutis N5 Developer Board items: - const: emlid,neutis-n5-devboard - const: emlid,neutis-n5 - const: allwinner,sun50i-h5 - - description: Emlid Neutis N5H3 Developper Board + - description: Emlid Neutis N5H3 Developer Board items: - const: emlid,neutis-n5h3-devboard - const: emlid,neutis-n5h3 @@ -997,4 +997,9 @@ properties: - const: xunlong,orangepi-zero2 - const: allwinner,sun50i-h616 + - description: Xunlong OrangePi Zero 3 + items: + - const: xunlong,orangepi-zero3 + - const: allwinner,sun50i-h618 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt deleted file mode 100644 index 5ae601e7f51f..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt +++ /dev/null @@ -1,21 +0,0 @@ -NVIDIA compliant embedded controller - -Required properties: -- compatible : should be "nvidia,nvec". -- reg : the iomem of the i2c slave controller -- interrupts : the interrupt line of the i2c slave controller -- clock-frequency : the frequency of the i2c bus -- gpios : the gpio used for ec request -- slave-addr: the i2c address of the slave controller -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - Tegra20/Tegra30: - - div-clk - - fast-clk - Tegra114: - - div-clk -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - i2c diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt deleted file mode 100644 index 9a4295b54539..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt +++ /dev/null @@ -1,17 +0,0 @@ -NVIDIA Tegra AHB - -Required properties: -- compatible : For Tegra20, must contain "nvidia,tegra20-ahb". For - Tegra30, must contain "nvidia,tegra30-ahb". Otherwise, must contain - '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124, - tegra132, or tegra210. -- reg : Should contain 1 register ranges(address and length). For - Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004 - 0x10c>. For Tegra124, Tegra132 and Tegra210 chips, the value should - be be <0x6000c000 0x150>. - -Example (for a Tegra20 chip): - ahb: ahb@6000c004 { - compatible = "nvidia,tegra20-ahb"; - reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ - }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt deleted file mode 100644 index a855c1bffc0f..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt +++ /dev/null @@ -1,18 +0,0 @@ -NVIDIA Tegra Flow Controller - -Required properties: -- compatible: Should contain one of the following: - - "nvidia,tegra20-flowctrl": for Tegra20 - - "nvidia,tegra30-flowctrl": for Tegra30 - - "nvidia,tegra114-flowctrl": for Tegra114 - - "nvidia,tegra124-flowctrl": for Tegra124 - - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132 - - "nvidia,tegra210-flowctrl": for Tegra210 -- reg: Should contain one register range (address and length) - -Example: - - flow-controller@60007000 { - compatible = "nvidia,tegra20-flowctrl"; - reg = <0x60007000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 577eee95c893..03d2a0d79fb0 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -25,6 +25,12 @@ properties: - ti,am62a7-sk - const: ti,am62a7 + - description: K3 AM62P5 SoC and Boards + items: + - enum: + - ti,am62p5-sk + - const: ti,am62p5 + - description: K3 AM625 SoC PHYTEC phyBOARD-Lyra items: - const: phytec,am625-phyboard-lyra-rdk @@ -72,6 +78,13 @@ properties: - const: phytec,am64-phycore-som - const: ti,am642 + - description: K3 AM642 SoC on TQ-Systems TQMaX4XxL SoM + items: + - enum: + - tq,am642-tqma6442l-mbax4xxl # MBaX4XxL base board + - const: tq,am642-tqma6442l + - const: ti,am642 + - description: K3 AM654 SoC items: - enum: diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml new file mode 100644 index 000000000000..b18fc046390a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/ti/omap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OMAP SoC architecture + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: Platforms based on Texas Instruments OMAP SoC architecture. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: TI OMAP2420 SoC based platforms + items: + - enum: + - nokia,n800 + - nokia,n810 + - nokia,n810-wimax + - ti,omap2420-h4 + - const: ti,omap2420 + - const: ti,omap2 + + - description: TI OMAP2430 SoC based platforms + items: + - enum: + - ti,omap2430-sdp # TI OMAP2430 SDP + - const: ti,omap2430 + - const: ti,omap2 + + - description: TI OMAP3430 SoC based platforms + items: + - enum: + - compulab,omap3-cm-t3530 + - logicpd,dm3730-som-lv-devkit # LogicPD Zoom OMAP35xx SOM-LV Development Kit + - logicpd,dm3730-torpedo-devkit # LogicPD Zoom OMAP35xx Torpedo Development Kit + - nokia,omap3-n900 + - openpandora,omap3-pandora-600mhz + - ti,omap3430-sdp + - ti,omap3-beagle + - ti,omap3-evm # TI OMAP35XX EVM (TMDSEVM3530) + - ti,omap3-ldp # TI OMAP3430 LDP (Zoom1 Labrador) + - timll,omap3-devkit8000 + - const: ti,omap3430 + - const: ti,omap3 + + - description: Early BeagleBoard revisions A to B4 with a timer quirk + items: + - const: ti,omap3-beagle-ab4 + - const: ti,omap3-beagle + - const: ti,omap3430 + - const: ti,omap3 + + - description: Gumstix Overo TI OMAP 3430/3630 boards + expansion boards + items: + - enum: + - gumstix,omap3-overo-alto35 + - gumstix,omap3-overo-chestnut43 + - gumstix,omap3-overo-gallop43 + - gumstix,omap3-overo-palo35 + - gumstix,omap3-overo-palo43 + - gumstix,omap3-overo-summit + - gumstix,omap3-overo-tobi + - gumstix,omap3-overo-tobiduo + - const: gumstix,omap3-overo + - enum: + - ti,omap3430 + - ti,omap3630 + + - description: TI OMAP3630 SoC based platforms + items: + - enum: + - amazon,omap3-echo # Amazon Echo (first generation) + - compulab,omap3-cm-t3730 + - goldelico,gta04 + - lg,omap3-sniper # LG Optimus Black + - logicpd,dm3730-som-lv-devkit # LogicPD Zoom DM3730 SOM-LV Development Kit + - logicpd,dm3730-torpedo-devkit # LogicPD Zoom DM3730 Torpedo + Wireless Development Kit + - nokia,omap3-n9 + - nokia,omap3-n950 + - openpandora,omap3-pandora-1ghz + - ti,omap3-beagle-xm + - ti,omap3-evm-37xx # TI OMAP37XX EVM (TMDSEVM3730) + - ti,omap3-zoom3 + - const: ti,omap3630 + - const: ti,omap3 + + - description: TI AM35 SoC based platforms + items: + - enum: + - compulab,omap3-sbc-t3517 # CompuLab SBC-T3517 with CM-T3517 + - teejet,mt_ventoux + - ti,am3517-craneboard # TI AM3517 CraneBoard (TMDSEVM3517) + - ti,am3517-evm # TI AM3517 EVM (AM3517/05 TMDSEVM3517) + - const: ti,am3517 + - const: ti,omap3 + + - description: TI AM33 based platform + items: + - enum: + - compulab,cm-t335 + - moxa,uc-8100-me-t + - novatech,am335x-lxm + - ti,am335x-bone + - ti,am335x-evm + - ti,am3359-icev2 + - const: ti,am33xx + + - description: Compulab board variants based on TI AM33 + items: + - enum: + - compulab,sbc-t335 + - const: compulab,cm-t335 + - const: ti,am33xx + + - description: Phytec boards based on TI AM33 + items: + - enum: + - phytec,am335x-wega + - phytec,am335x-pcm-953 + - phytec,am335x-regor + - const: phytec,am335x-phycore-som + - const: ti,am33xx + + - description: TI OMAP4430 SoC based platforms + items: + - enum: + - amazon,omap4-kc1 # Amazon Kindle Fire (first generation) + - motorola,droid4 # Motorola Droid 4 XT894 + - motorola,droid-bionic # Motorola Droid Bionic XT875 + - ti,omap4-panda + - ti,omap4-sdp + - const: ti,omap4430 + - const: ti,omap4 + + - description: OMAP4 DuoVero with Parlor expansion board/daughter board + items: + - const: gumstix,omap4-duovero-parlor + - const: gumstix,omap4-duovero + - const: ti,omap4430 + - const: ti,omap4 + + - description: TI OMAP4460 SoC based platforms + items: + - enum: + - epson,embt2ws # Epson Moverio BT-200 + - ti,omap4-panda-es + - const: ti,omap4460 + - const: ti,omap4 + + - description: VAR-OM44 boards + items: + - enum: + - variscite,var-dvk-om44 + - variscite,var-stk-om44 + - const: variscite,var-som-om44 + - const: ti,omap4460 + - const: ti,omap4 + + - description: TI OMAP5 SoC based platforms + items: + - enum: + - compulab,omap5-cm-t54 + - isee,omap5-igep0050 + - ti,omap5-uevm + - const: ti,omap5 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index 2412894a255d..337ddf1113c4 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to most Parallel ATA (PATA, also known as IDE) AT attachment storage devices. - It doesn't constitue a device tree binding specification by itself but is + It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. The PATA (IDE) controller-specific device tree bindings are responsible for diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml index b23c3001991e..3aaefdbe361e 100644 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml @@ -43,7 +43,7 @@ properties: brcm,gisb-arb-master-names: $ref: /schemas/types.yaml#/definitions/string-array description: > - String list of the litteral name of the GISB masters. Should match the + String list of the literal name of the GISB masters. Should match the number of bits set in brcm,gisb-master-mask and the order in which they appear from MSB to LSB. diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml index 4157e885c6e7..26362c9006e2 100644 --- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml @@ -7,10 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NVIDIA Tegra ACONNECT Bus description: | - The Tegra ACONNECT bus is an AXI switch which is used to connnect various + The Tegra ACONNECT bus is an AXI switch which is used to connect various components inside the Audio Processing Engine (APE). All CPU accesses to the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All - devices accessed via the ACONNNECT are described by child-nodes. + devices accessed via the ACONNECT are described by child-nodes. maintainers: - Jon Hunter <jonathanh@nvidia.com> diff --git a/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml new file mode 100644 index 000000000000..693cfa9696b5 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Single-wire Serial Bus Interface (SSBI) + +description: + Some Qualcomm MSM devices contain a point-to-point serial bus used to + communicate with a limited range of devices (mostly power management + chips). + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + const: qcom,ssbi + + reg: + maxItems: 1 + + qcom,controller-type: + description: + Indicates the SSBI bus variant the controller should use to talk + with the slave device. The type chosen is determined by the attached + slave. + enum: + - ssbi + - ssbi2 + - pmic-arbiter + + pmic: + $ref: /schemas/mfd/qcom-pm8xxx.yaml# + +required: + - compatible + - reg + - qcom,controller-type + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + ssbi@c00000 { + compatible = "qcom,ssbi"; + reg = <0x00c00000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pmic { + compatible = "qcom,pm8821"; + interrupt-parent = <&msmgpio>; + interrupts = <76 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml index 3b0548c34791..9f9816fbecbc 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -29,10 +29,8 @@ properties: patternProperties: '^connector@[0-9a-f]+$': $ref: /schemas/connector/usb-connector.yaml# - unevaluatedProperties: false - properties: - reg: - maxItems: 1 + required: + - reg required: - compatible diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml index 52a7b6e7124c..0052bf1e8a6b 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Gatable Oscillator Clock +title: Allwinner A10 Gateable Oscillator Clock maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt index b3205b21c9d0..c9fb9324c634 100644 --- a/Documentation/devicetree/bindings/clock/alphascale,acc.txt +++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt @@ -1,7 +1,7 @@ Alphascale Clock Controller -The ACC (Alphascale Clock Controller) is responsible of choising proper -clock source, setting deviders and clock gates. +The ACC (Alphascale Clock Controller) is responsible for choosing proper +clock source, setting dividers and clock gates. Required properties for the ACC node: - compatible: must be "alphascale,asm9260-clock-controller" diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt deleted file mode 100644 index c41f0be5d438..000000000000 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Amlogic GXBB AO Clock and Reset Unit - -The Amlogic GXBB AO clock controller generates and supplies clock to various -controllers within the Always-On part of the SoC. - -Required Properties: - -- compatible: value should be different for each SoC family as : - - GXBB (S905) : "amlogic,meson-gxbb-aoclkc" - - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc" - - GXM (S912) : "amlogic,meson-gxm-aoclkc" - - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" - - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc" - followed by the common "amlogic,meson-gx-aoclkc" -- clocks: list of clock phandle, one for each entry clock-names. -- clock-names: should contain the following: - * "xtal" : the platform xtal - * "mpeg-clk" : the main clock controller mother clock (aka clk81) - * "ext-32k-0" : external 32kHz reference #0 if any (optional) - * "ext-32k-1" : external 32kHz reference #1 if any (optional - gx only) - * "ext-32k-2" : external 32kHz reference #2 if any (optional - gx only) - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be -used in device tree sources. - -- #reset-cells: should be 1. - -Each reset is assigned an identifier and client nodes can use this identifier -to specify the reset which they consume. All available resets are defined as -preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be -used in device tree sources. - -Parent node should have the following properties : -- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" -- reg: base address and size of the AO system control register space. - -Example: AO Clock controller node: - -ao_sysctrl: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; - reg = <0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - -Example: UART controller node that consumes the clock and reset generated - by the clock controller: - - uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; - reg = <0x4c0 0x14>; - interrupts = <0 90 1>; - clocks = <&clkc_AO CLKID_AO_UART1>; - resets = <&clkc_AO RESET_AO_UART1>; - }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml new file mode 100644 index 000000000000..628e5dd33dd4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,gxbb-aoclkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Always-On Clock Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson-gxbb-aoclkc + - amlogic,meson-gxl-aoclkc + - amlogic,meson-gxm-aoclkc + - amlogic,meson-axg-aoclkc + - const: amlogic,meson-gx-aoclkc + - enum: + - amlogic,meson-axg-aoclkc + - amlogic,meson-g12a-aoclkc + + clocks: + minItems: 2 + maxItems: 5 + + clock-names: + minItems: 2 + items: + - const: xtal + - const: mpeg-clk + - const: ext-32k-0 + - const: ext-32k-1 + - const: ext-32k-2 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-g12a-aoclkc + + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + - if: + properties: + compatible: + enum: + - amlogic,meson-gxl-aoclkc + - amlogic,meson-gxm-aoclkc + - amlogic,meson-axg-aoclkc + + then: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt deleted file mode 100644 index 7ccecd5c02c1..000000000000 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Amlogic GXBB Clock and Reset Unit - -The Amlogic GXBB clock controller generates and supplies clock to various -controllers within the SoC. - -Required Properties: - -- compatible: should be: - "amlogic,gxbb-clkc" for GXBB SoC, - "amlogic,gxl-clkc" for GXL and GXM SoC, - "amlogic,axg-clkc" for AXG SoC. - "amlogic,g12a-clkc" for G12A SoC. - "amlogic,g12b-clkc" for G12B SoC. - "amlogic,sm1-clkc" for SM1 SoC. -- clocks : list of clock phandle, one for each entry clock-names. -- clock-names : should contain the following: - * "xtal": the platform xtal - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be -used in device tree sources. - -Parent node should have the following properties : -- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or - "amlogic,meson-axg-hhi-sysctrl" -- reg: base address and size of the HHI system control register space. - -Example: Clock controller node: - -sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - #clock-cells = <1>; - compatible = "amlogic,gxbb-clkc"; - clocks = <&xtal>; - clock-names = "xtal"; - }; -}; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart_AO: serial@c81004c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x14>; - interrupts = <0 90 1>; - clocks = <&clkc CLKID_CLK81>; - }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml new file mode 100644 index 000000000000..63246f1cb539 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,gxbb-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Clock Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - amlogic,gxbb-clkc + - amlogic,gxl-clkc + - amlogic,axg-clkc + - amlogic,g12a-clkc + - amlogic,g12b-clkc + - amlogic,sm1-clkc + + clocks: + maxItems: 1 + + clock-names: + const: xtal + + '#clock-cells': + const: 1 + +required: + - compatible + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml new file mode 100644 index 000000000000..07b9d21719c4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,imx8-acm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8 Audio Clock Mux + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: | + NXP i.MX8 Audio Clock Mux is dedicated clock muxing IP + used to control Audio related clock on the SoC. + +properties: + compatible: + enum: + - fsl,imx8dxl-acm + - fsl,imx8qm-acm + - fsl,imx8qxp-acm + + reg: + maxItems: 1 + + power-domains: + minItems: 13 + maxItems: 21 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8-clock.h + for the full list of i.MX8 ACM clock IDs. + + clocks: + minItems: 13 + maxItems: 27 + + clock-names: + minItems: 13 + maxItems: 27 + +required: + - compatible + - reg + - power-domains + - '#clock-cells' + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-acm + then: + properties: + power-domains: + items: + - description: power domain of IMX_SC_R_AUDIO_CLK_0 + - description: power domain of IMX_SC_R_AUDIO_CLK_1 + - description: power domain of IMX_SC_R_MCLK_OUT_0 + - description: power domain of IMX_SC_R_MCLK_OUT_1 + - description: power domain of IMX_SC_R_AUDIO_PLL_0 + - description: power domain of IMX_SC_R_AUDIO_PLL_1 + - description: power domain of IMX_SC_R_ASRC_0 + - description: power domain of IMX_SC_R_ASRC_1 + - description: power domain of IMX_SC_R_ESAI_0 + - description: power domain of IMX_SC_R_SAI_0 + - description: power domain of IMX_SC_R_SAI_1 + - description: power domain of IMX_SC_R_SAI_2 + - description: power domain of IMX_SC_R_SAI_3 + - description: power domain of IMX_SC_R_SAI_4 + - description: power domain of IMX_SC_R_SAI_5 + - description: power domain of IMX_SC_R_SPDIF_0 + - description: power domain of IMX_SC_R_MQS_0 + + clocks: + minItems: 18 + maxItems: 18 + + clock-names: + items: + - const: aud_rec_clk0_lpcg_clk + - const: aud_rec_clk1_lpcg_clk + - const: aud_pll_div_clk0_lpcg_clk + - const: aud_pll_div_clk1_lpcg_clk + - const: ext_aud_mclk0 + - const: ext_aud_mclk1 + - const: esai0_rx_clk + - const: esai0_rx_hf_clk + - const: esai0_tx_clk + - const: esai0_tx_hf_clk + - const: spdif0_rx + - const: sai0_rx_bclk + - const: sai0_tx_bclk + - const: sai1_rx_bclk + - const: sai1_tx_bclk + - const: sai2_rx_bclk + - const: sai3_rx_bclk + - const: sai4_rx_bclk + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-acm + then: + properties: + power-domains: + items: + - description: power domain of IMX_SC_R_AUDIO_CLK_0 + - description: power domain of IMX_SC_R_AUDIO_CLK_1 + - description: power domain of IMX_SC_R_MCLK_OUT_0 + - description: power domain of IMX_SC_R_MCLK_OUT_1 + - description: power domain of IMX_SC_R_AUDIO_PLL_0 + - description: power domain of IMX_SC_R_AUDIO_PLL_1 + - description: power domain of IMX_SC_R_ASRC_0 + - description: power domain of IMX_SC_R_ASRC_1 + - description: power domain of IMX_SC_R_ESAI_0 + - description: power domain of IMX_SC_R_ESAI_1 + - description: power domain of IMX_SC_R_SAI_0 + - description: power domain of IMX_SC_R_SAI_1 + - description: power domain of IMX_SC_R_SAI_2 + - description: power domain of IMX_SC_R_SAI_3 + - description: power domain of IMX_SC_R_SAI_4 + - description: power domain of IMX_SC_R_SAI_5 + - description: power domain of IMX_SC_R_SAI_6 + - description: power domain of IMX_SC_R_SAI_7 + - description: power domain of IMX_SC_R_SPDIF_0 + - description: power domain of IMX_SC_R_SPDIF_1 + - description: power domain of IMX_SC_R_MQS_0 + + clocks: + minItems: 27 + maxItems: 27 + + clock-names: + items: + - const: aud_rec_clk0_lpcg_clk + - const: aud_rec_clk1_lpcg_clk + - const: aud_pll_div_clk0_lpcg_clk + - const: aud_pll_div_clk1_lpcg_clk + - const: mlb_clk + - const: hdmi_rx_mclk + - const: ext_aud_mclk0 + - const: ext_aud_mclk1 + - const: esai0_rx_clk + - const: esai0_rx_hf_clk + - const: esai0_tx_clk + - const: esai0_tx_hf_clk + - const: esai1_rx_clk + - const: esai1_rx_hf_clk + - const: esai1_tx_clk + - const: esai1_tx_hf_clk + - const: spdif0_rx + - const: spdif1_rx + - const: sai0_rx_bclk + - const: sai0_tx_bclk + - const: sai1_rx_bclk + - const: sai1_tx_bclk + - const: sai2_rx_bclk + - const: sai3_rx_bclk + - const: sai4_rx_bclk + - const: sai5_tx_bclk + - const: sai6_rx_bclk + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8dxl-acm + then: + properties: + power-domains: + items: + - description: power domain of IMX_SC_R_AUDIO_CLK_0 + - description: power domain of IMX_SC_R_AUDIO_CLK_1 + - description: power domain of IMX_SC_R_MCLK_OUT_0 + - description: power domain of IMX_SC_R_MCLK_OUT_1 + - description: power domain of IMX_SC_R_AUDIO_PLL_0 + - description: power domain of IMX_SC_R_AUDIO_PLL_1 + - description: power domain of IMX_SC_R_ASRC_0 + - description: power domain of IMX_SC_R_SAI_0 + - description: power domain of IMX_SC_R_SAI_1 + - description: power domain of IMX_SC_R_SAI_2 + - description: power domain of IMX_SC_R_SAI_3 + - description: power domain of IMX_SC_R_SPDIF_0 + - description: power domain of IMX_SC_R_MQS_0 + + clocks: + minItems: 13 + maxItems: 13 + + clock-names: + items: + - const: aud_rec_clk0_lpcg_clk + - const: aud_rec_clk1_lpcg_clk + - const: aud_pll_div_clk0_lpcg_clk + - const: aud_pll_div_clk1_lpcg_clk + - const: ext_aud_mclk0 + - const: ext_aud_mclk1 + - const: spdif0_rx + - const: sai0_rx_bclk + - const: sai0_tx_bclk + - const: sai1_rx_bclk + - const: sai1_tx_bclk + - const: sai2_rx_bclk + - const: sai3_rx_bclk + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + clock-controller@59e00000 { + compatible = "fsl,imx8qxp-acm"; + reg = <0x59e00000 0x1d0000>; + #clock-cells = <1>; + power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>, + <&pd IMX_SC_R_AUDIO_CLK_1>, + <&pd IMX_SC_R_MCLK_OUT_0>, + <&pd IMX_SC_R_MCLK_OUT_1>, + <&pd IMX_SC_R_AUDIO_PLL_0>, + <&pd IMX_SC_R_AUDIO_PLL_1>, + <&pd IMX_SC_R_ASRC_0>, + <&pd IMX_SC_R_ASRC_1>, + <&pd IMX_SC_R_ESAI_0>, + <&pd IMX_SC_R_SAI_0>, + <&pd IMX_SC_R_SAI_1>, + <&pd IMX_SC_R_SAI_2>, + <&pd IMX_SC_R_SAI_3>, + <&pd IMX_SC_R_SAI_4>, + <&pd IMX_SC_R_SAI_5>, + <&pd IMX_SC_R_SPDIF_0>, + <&pd IMX_SC_R_MQS_0>; + clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>, + <&aud_rec1_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>, + <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>, + <&clk_ext_aud_mclk0>, + <&clk_ext_aud_mclk1>, + <&clk_esai0_rx_clk>, + <&clk_esai0_rx_hf_clk>, + <&clk_esai0_tx_clk>, + <&clk_esai0_tx_hf_clk>, + <&clk_spdif0_rx>, + <&clk_sai0_rx_bclk>, + <&clk_sai0_tx_bclk>, + <&clk_sai1_rx_bclk>, + <&clk_sai1_tx_bclk>, + <&clk_sai2_rx_bclk>, + <&clk_sai3_rx_bclk>, + <&clk_sai4_rx_bclk>; + clock-names = "aud_rec_clk0_lpcg_clk", + "aud_rec_clk1_lpcg_clk", + "aud_pll_div_clk0_lpcg_clk", + "aud_pll_div_clk1_lpcg_clk", + "ext_aud_mclk0", + "ext_aud_mclk1", + "esai0_rx_clk", + "esai0_rx_hf_clk", + "esai0_tx_clk", + "esai0_tx_hf_clk", + "spdif0_rx", + "sai0_rx_bclk", + "sai0_tx_bclk", + "sai1_rx_bclk", + "sai1_tx_bclk", + "sai2_rx_bclk", + "sai3_rx_bclk", + "sai4_rx_bclk"; + }; diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt deleted file mode 100644 index 4733e58e491b..000000000000 --- a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Hisilicon Hix5hd2 Clock Controller - -The hix5hd2 clock controller generates and supplies clock to various -controllers within the hix5hd2 SoC. - -Required Properties: - -- compatible: should be "hisilicon,hix5hd2-clock" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>. - -Examples: - clock: clock@f8a22000 { - compatible = "hisilicon,hix5hd2-clock"; - reg = <0xf8a22000 0x1000>; - #clock-cells = <1>; - }; - - uart0: uart@f8b00000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xf8b00000 0x1000>; - interrupts = <0 49 4>; - clocks = <&clock HIX5HD2_FIXED_83M>; - clock-names = "apb_pclk"; - }; diff --git a/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml b/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml new file mode 100644 index 000000000000..d120b0da7f3d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/intel,agilex5-clkmgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel SoCFPGA Agilex5 clock manager + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +description: + The Intel Agilex5 Clock Manager is an integrated clock controller, which + generates and supplies clock to all the modules. + +properties: + compatible: + const: intel,agilex5-clkmgr + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clkmgr: clock-controller@10d10000 { + compatible = "intel,agilex5-clkmgr"; + reg = <0x10d10000 0x1000>; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt index 47570d207215..9a3fbc665606 100644 --- a/Documentation/devicetree/bindings/clock/keystone-pll.txt +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -14,7 +14,7 @@ Required properties: - #clock-cells : from common clock binding; shall be set to 0. - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock" - clocks : parent clock phandle -- reg - pll control0 and pll multipler registers +- reg - pll control0 and pll multiplier registers - reg-names : control, multiplier and post-divider. The multiplier and post-divider registers are applicable only for main pll clock - fixed-postdiv : fixed post divider value. If absent, use clkod register bits diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt index fa97c12014ac..8cf8f0ecdd16 100644 --- a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt +++ b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt @@ -68,7 +68,7 @@ soc { "base_ssp0_clk", "base_sdio_clk"; }; - /* A user of CCU brach clocks */ + /* A user of CCU branch clocks */ uart1: serial@40082000 { ... clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt index 6f1c7b4e4d2c..b6b2547a3d17 100644 --- a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt +++ b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt @@ -5,8 +5,8 @@ control registers for two low speed clocks. One of the clocks is a 32 kHz oscillator driver with power up/down and clock gating. Next is a fixed divider that creates a 1 kHz clock from the 32 kHz osc. -These clocks are used by the RTC and the Event Router peripherials. -The 32 kHz can also be routed to other peripherials to enable low +These clocks are used by the RTC and the Event Router peripherals. +The 32 kHz can also be routed to other peripherals to enable low power modes. This binding uses the common clock binding: diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.txt b/Documentation/devicetree/bindings/clock/maxim,max9485.txt index 61bec1100a94..b8f5c3bbf12b 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max9485.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max9485.txt @@ -12,7 +12,7 @@ requests. Required properties: - compatible: "maxim,max9485" -- clocks: Input clock, must provice 27.000 MHz +- clocks: Input clock, must provide 27.000 MHz - clock-names: Must be set to "xclk" - #clock-cells: From common clock binding; shall be set to 1 diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml index 1b2181f6d440..a9ba21144a56 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml @@ -27,7 +27,9 @@ description: | properties: compatible: - const: nvidia,tegra124-car + enum: + - nvidia,tegra124-car + - nvidia,tegra132-car reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt deleted file mode 100644 index b652f3fb7796..000000000000 --- a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt +++ /dev/null @@ -1,28 +0,0 @@ -Oxford Semiconductor OXNAS SoC Family Standard Clocks -================================================ - -Please also refer to clock-bindings.txt in this directory for common clock -bindings usage. - -Required properties: -- compatible: For OX810SE, should be "oxsemi,ox810se-stdclk" - For OX820, should be "oxsemi,ox820-stdclk" -- #clock-cells: 1, see below - -Parent node should have the following properties : -- compatible: For OX810SE, should be - "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" - For OX820, should be - "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" - -example: - -sys: sys-ctrl@000000 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - stdclk: stdclk { - compatible = "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml index 8a210c4c5f82..0a3ef7fd03fa 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml @@ -29,6 +29,7 @@ properties: - description: Link clock from DP PHY - description: VCO DIV clock from DP PHY - description: AHB config clock from GCC + - description: GPLL0 div source from GCC clock-names: items: @@ -39,6 +40,7 @@ properties: - const: dp_phy_pll_link_clk - const: dp_phy_pll_vco_div_clk - const: cfg_ahb_clk + - const: gcc_disp_gpll0_div_clk_src '#clock-cells': const: 1 @@ -46,6 +48,16 @@ properties: '#power-domain-cells': const: 1 + power-domains: + description: + A phandle and PM domain specifier for the CX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing the power domain's performance point. + maxItems: 1 + reg: maxItems: 1 @@ -63,23 +75,31 @@ examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/power/qcom-rpmpd.h> clock-controller@5f00000 { compatible = "qcom,sm6125-dispcc"; reg = <0x5f00000 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&dsi0_phy 0>, <&dsi0_phy 1>, <&dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>, - <&gcc GCC_DISP_AHB_CLK>; + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", "dsi1_phy_pll_out_dsiclk", "dp_phy_pll_link_clk", "dp_phy_pll_vco_div_clk", - "cfg_ahb_clk"; + "cfg_ahb_clk", + "gcc_disp_gpll0_div_clk_src"; + + required-opps = <&rpmhpd_opp_ret>; + power-domains = <&rpmpd SM6125_VDDCX>; + #clock-cells = <1>; #power-domain-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml index d6774db257f0..59cc88a52f6b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -82,7 +82,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8250-dispcc"; reg = <0x0af00000 0x10000>; @@ -103,7 +103,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index 09cd7a786871..19211176ee0b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on APQ8064/MSM8960 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml index 6ebaef2288fa..fb3957d485f9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on IPQ4019 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> - Robert Marko <robert.markoo@sartura.hr> description: | diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml index deef398a9872..52e7831a8d6d 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on IPQ8074 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml index d2186e25f55f..62d6f1fe1228 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on MSM8976 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml index f77036ace31b..97523cc1ecfb 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on MSM8996 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module which provides the clocks, resets and diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml index 3c9729050d6f..58f7fb22c5c4 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on MSM8998 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml index ba969e7a57bf..559fc21435c8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power @@ -19,8 +19,6 @@ description: | include/dt-bindings/reset/qcom,gcc-ipq6018.h include/dt-bindings/clock/qcom,gcc-msm8953.h include/dt-bindings/clock/qcom,gcc-mdm9607.h - include/dt-bindings/clock/qcom,gcc-mdm9615.h - include/dt-bindings/reset/qcom,gcc-mdm9615.h allOf: - $ref: qcom,gcc.yaml# @@ -30,7 +28,6 @@ properties: enum: - qcom,gcc-ipq6018 - qcom,gcc-mdm9607 - - qcom,gcc-mdm9615 required: - compatible diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml index b2256f81b265..7bc6c57e4d11 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on QCS404 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index 8bf9b6f49550..7aae21a76690 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on SC7180 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml index ff0b18bbb0fc..c4ca08d9ad5a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml index 68e1b7822fe0..0595da0e8a42 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on SDM670 and SDM845 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml index 3ea0ff37a4cb..58ccb7df847c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on SM8150 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index ead6665b9a45..5d77c092be5b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller on SM8250 maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm global clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml index 9a31981fbeb2..75259f468d54 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml @@ -25,7 +25,7 @@ properties: - description: Sleep clock source - description: PCIE 0 Pipe clock source (Optional clock) - description: PCIE 1 Pipe clock source (Optional clock) - - description: PCIE 1 Phy Auxillary clock source (Optional clock) + - description: PCIE 1 Phy Auxiliary clock source (Optional clock) - description: UFS Phy Rx symbol 0 clock source (Optional clock) - description: UFS Phy Rx symbol 1 clock source (Optional clock) - description: UFS Phy Tx symbol 0 clock source (Optional clock) diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index 7129fbcf2b6c..788825105f24 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -8,7 +8,7 @@ title: Qualcomm Global Clock & Reset Controller Common Properties maintainers: - Stephen Boyd <sboyd@kernel.org> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Common bindings for Qualcomm global clock control module providing the diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml index a00216b3b15a..f369fa34e00c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Graphics Clock & Reset Controller maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm graphics clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml new file mode 100644 index 000000000000..ef84a0c95f7e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,ipq5018-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on IPQ5018 + +maintainers: + - Sricharan Ramabadhran <quic_srichara@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on IPQ5018 + + See also:: + include/dt-bindings/clock/qcom,ipq5018-gcc.h + include/dt-bindings/reset/qcom,ipq5018-gcc.h + +properties: + compatible: + const: qcom,gcc-ipq5018 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PCIE20 PHY0 pipe clock source + - description: PCIE20 PHY1 pipe clock source + - description: USB3 PHY pipe clock source + - description: GEPHY RX clock source + - description: GEPHY TX clock source + - description: UNIPHY RX clock source + - description: UNIPHY TX clk source + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + clock-controller@1800000 { + compatible = "qcom,gcc-ipq5018"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&pcie20_phy0_pipe_clk>, + <&pcie20_phy1_pipe_clk>, + <&usb3_phy0_pipe_clk>, + <&gephy_rx_clk>, + <&gephy_tx_clk>, + <&uniphy_rx_clk>, + <&uniphy_tx_clk>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml index a466e4e8aacd..57632757d4e6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml @@ -14,7 +14,7 @@ description: There is one ACC register region per CPU within the KPSS remapped region as well as an alias register region that remaps accesses to the ACC associated with the CPU accessing the region. ACC v1 is currently used as a - clock-controller for enabling the cpu and hanling the aux clocks. + clock-controller for enabling the cpu and handling the aux clocks. properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.yaml b/Documentation/devicetree/bindings/clock/qcom,lcc.yaml index 8c783823e93c..55985e562a34 100644 --- a/Documentation/devicetree/bindings/clock/qcom,lcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,lcc.yaml @@ -76,6 +76,40 @@ allOf: - clocks - clock-names + - if: + properties: + compatible: + contains: + enum: + - qcom,lcc-mdm9615 + then: + properties: + clocks: + items: + - description: Board CXO source + - description: PLL 4 Vote clock + - description: MI2S codec clock + - description: Mic I2S codec clock + - description: Mic I2S spare clock + - description: Speaker I2S codec clock + - description: Speaker I2S spare clock + - description: PCM codec clock + + clock-names: + items: + - const: cxo + - const: pll4_vote + - const: mi2s_codec_clk + - const: codec_i2s_mic_codec_clk + - const: spare_i2s_mic_codec_clk + - const: codec_i2s_spkr_codec_clk + - const: spare_i2s_spkr_codec_clk + - const: pcm_codec_clk + + required: + - clocks + - clock-names + examples: - | clock-controller@28000000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index 422f5776a771..aa35a40648ba 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -8,7 +8,7 @@ title: Qualcomm Multimedia Clock & Reset Controller maintainers: - Jeffrey Hugo <quic_jhugo@quicinc.com> - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm multimedia clock control module provides the clocks, resets and @@ -297,6 +297,7 @@ allOf: - description: HDMI phy PLL clock - description: DisplayPort phy PLL link clock - description: DisplayPort phy PLL vco clock + - description: Global PLL 0 DIV clock clock-names: items: @@ -309,6 +310,7 @@ allOf: - const: hdmipll - const: dplink - const: dpvco + - const: gpll0_div - if: properties: diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml index 3ffe69d8cdd5..0dfbd8c4d465 100644 --- a/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml @@ -15,7 +15,9 @@ description: > properties: compatible: - const: qcom,msm8996-cbf + enum: + - qcom,msm8996-cbf + - qcom,msm8996pro-cbf reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml index 2d8897991663..7b271ae210a3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Graphics Clock & Reset Controller on MSM8998 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm graphics clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml index 767a9d03aa32..d712b1a87e25 100644 --- a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller for QDU1000 and QRU1000 maintainers: - - Melody Olvera <quic_molvera@quicinc.com> + - Taniya Das <quic_tdas@quicinc.com> + - Imran Shaik <quic_imrashai@quicinc.com> description: | Qualcomm global clock control module which supports the clocks, resets and diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index 267cf8c26823..fd14d18309a8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. RPMh Clocks maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Resource Power Manager Hardened (RPMh) manages shared resources on diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml index 098c8acf4bad..2dfc2a4f1918 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Camera Clock & Reset Controller on SC7180 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm camera clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml index 95ad16d0abc3..1c9ce300a435 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display Clock & Reset Controller on SC7180 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm display clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml index f297694ef8b8..fdfb389083c1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm LPASS Core Clock Controller on SC7180 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm LPASS core clock control module provides the clocks and power diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml index 1e856a8a996e..873a2f918bac 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Modem Clock Controller on SC7180 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm modem clock control module provides the clocks on SC7180. diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml index b60adbad4590..01feef1cab0a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Camera Clock & Reset Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm camera clock control module provides the clocks, resets and diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml index cfe6594a0a6b..c42b0ef61385 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display Clock & Reset Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm display clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml index 97c6bd96e0cb..f44c5c130d2d 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm LPASS Core Clock Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm LPASS core clock control module provides the clocks and power diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml index 447cdc447a0c..deee5423d66e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm LPASS Core & Audio Clock Controller on SC7280 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm LPASS core and audio clock control module provides the clocks and diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml index 76b53ce64e40..719844d7ea11 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display Clock & Reset Controller on SDM845 maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm display clock control module provides the clocks, resets and power diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml index 23505c8c3dbd..46d1d91e3a01 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml @@ -19,7 +19,9 @@ description: | properties: compatible: - const: qcom,sm8350-videocc + enum: + - qcom,sc8280xp-videocc + - qcom,sm8350-videocc clocks: items: @@ -51,7 +53,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@abf0000 { compatible = "qcom,sm8350-videocc"; @@ -59,7 +61,7 @@ examples: clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml index 87ae74166807..8178c35bc348 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -64,7 +64,7 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@ade0000 { compatible = "qcom,sm8450-camcc"; reg = <0xade0000 0x20000>; @@ -72,7 +72,7 @@ examples: <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml index 1dd1f696dcd3..2f22310b08a9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml @@ -76,7 +76,7 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8450-dispcc"; reg = <0x0af00000 0x10000>; @@ -91,7 +91,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml index f1c6dd50f184..bad8f019a8d3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml @@ -64,13 +64,13 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> videocc: clock-controller@aaf0000 { compatible = "qcom,sm8450-videocc"; reg = <0x0aaf0000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_VIDEO_AHB_CLK>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml index ab25f7cbaa2e..c129f8c16b50 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml @@ -76,7 +76,7 @@ examples: - | #include <dt-bindings/clock/qcom,sm8550-gcc.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8550-dispcc"; reg = <0x0af00000 0x10000>; @@ -99,7 +99,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml index 2b07146161b4..6999e36ace1b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Video Clock & Reset Controller maintainers: - - Taniya Das <tdas@codeaurora.org> + - Taniya Das <quic_tdas@quicinc.com> description: | Qualcomm video clock control module provides the clocks, resets and power @@ -124,7 +124,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; reg = <0x0ab00000 0x10000>; @@ -133,7 +133,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml new file mode 100644 index 000000000000..839648e753d4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,5p35023.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas 5p35023 VersaClock 3 programmable I2C clock generator + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + The 5P35023 is a VersaClock programmable clock generator and + is designed for low-power, consumer, and high-performance PCI + express applications. The 5P35023 device is a three PLL + architecture design, and each PLL is individually programmable + and allowing for up to 6 unique frequency outputs. + + An internal OTP memory allows the user to store the configuration + in the device. After power up, the user can change the device register + settings through the I2C interface when I2C mode is selected. + + The driver can read a full register map from the DT, and will use that + register map to initialize the attached part (via I2C) when the system + boots. Any configuration not supported by the common clock framework + must be done via the full register map, including optimized settings. + + Link to datasheet: + https://www.renesas.com/us/en/products/clocks-timing/clock-generation/programmable-clocks/5p35023-versaclock-3s-programmable-clock-generator + +properties: + compatible: + enum: + - renesas,5p35023 + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + maxItems: 1 + + renesas,settings: + description: Optional, complete register map of the device. + Optimized settings for the device must be provided in full + and are written during initialization. + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 37 + +required: + - compatible + - reg + - '#clock-cells' + - clocks + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + versa3: clock-generator@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + + clocks = <&x1_x2>; + + renesas,settings = [ + 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf + 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 + 80 b0 45 c4 95 + ]; + + assigned-clocks = <&versa3 0>, <&versa3 1>, + <&versa3 2>, <&versa3 3>, + <&versa3 4>, <&versa3 5>; + assigned-clock-rates = <12288000>, <25000000>, + <12000000>, <11289600>, + <11289600>, <24000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index 1703e305e6d8..a0658056c330 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -66,7 +66,7 @@ then: else: description: | Other SC9863a clock nodes should be the child of a syscon node in - which compatible string shoule be: + which compatible string should be: "sprd,sc9863a-glbregs", "syscon", "simple-mfd" The 'reg' property for the clock node is also required if there is a sub diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml new file mode 100644 index 000000000000..3b8b85be5cd0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-ispcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 Image-Signal-Process Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-ispcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: ISP Top core + - description: ISP Top Axi + - description: NOC ISP Bus + - description: external DVP + + clock-names: + items: + - const: isp_top_core + - const: isp_top_axi + - const: noc_bus_isp_axi + - const: dvp_clk + + resets: + items: + - description: ISP Top core + - description: ISP Top Axi + - description: NOC ISP Bus + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + + power-domains: + maxItems: 1 + description: + ISP domain power + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - '#clock-cells' + - '#reset-cells' + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + #include <dt-bindings/power/starfive,jh7110-pmu.h> + #include <dt-bindings/reset/starfive,jh7110-crg.h> + + ispcrg: clock-controller@19810000 { + compatible = "starfive,jh7110-ispcrg"; + reg = <0x19810000 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, + <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>, + <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>, + <&dvp_clk>; + clock-names = "isp_top_core", "isp_top_axi", + "noc_bus_isp_axi", "dvp_clk"; + resets = <&syscrg JH7110_SYSRST_ISP_TOP>, + <&syscrg JH7110_SYSRST_ISP_TOP_AXI>, + <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>; + #clock-cells = <1>; + #reset-cells = <1>; + power-domains = <&pwrc JH7110_PD_ISP>; + }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml new file mode 100644 index 000000000000..be8300ce86d0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 PLL Clock Generator + +description: + These PLLs are high speed, low jitter frequency synthesizers in the JH7110. + Each PLL works in integer mode or fraction mode, with configuration + registers in the sys syscon. So the PLLs node should be a child of + SYS-SYSCON node. + The formula for calculating frequency is + Fvco = Fref * (NI + NF) / M / Q1 + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-pll + + clocks: + maxItems: 1 + description: Main Oscillator (24 MHz) + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + +required: + - compatible + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller { + compatible = "starfive,jh7110-pll"; + clocks = <&osc>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml new file mode 100644 index 000000000000..b64ccd84200a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-stgcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 System-Top-Group Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-stgcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: Main Oscillator (24 MHz) + - description: HIFI4 core + - description: STG AXI/AHB + - description: USB (125 MHz) + - description: CPU Bus + - description: HIFI4 Axi + - description: NOC STG Bus + - description: APB Bus + + clock-names: + items: + - const: osc + - const: hifi4_core + - const: stg_axiahb + - const: usb_125m + - const: cpu_bus + - const: hifi4_axi + - const: nocstg_bus + - const: apb_bus + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + + stgcrg: clock-controller@10230000 { + compatible = "starfive,jh7110-stgcrg"; + reg = <0x10230000 0x10000>; + clocks = <&osc>, + <&syscrg JH7110_SYSCLK_HIFI4_CORE>, + <&syscrg JH7110_SYSCLK_STG_AXIAHB>, + <&syscrg JH7110_SYSCLK_USB_125M>, + <&syscrg JH7110_SYSCLK_CPU_BUS>, + <&syscrg JH7110_SYSCLK_HIFI4_AXI>, + <&syscrg JH7110_SYSCLK_NOCSTG_BUS>, + <&syscrg JH7110_SYSCLK_APB_BUS>; + clock-names = "osc", "hifi4_core", + "stg_axiahb", "usb_125m", + "cpu_bus", "hifi4_axi", + "nocstg_bus", "apb_bus"; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml index 84373ae31644..5ba0a885aa80 100644 --- a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml @@ -27,6 +27,9 @@ properties: - description: External I2S RX left/right channel clock - description: External TDM clock - description: External audio master clock + - description: PLL0 + - description: PLL1 + - description: PLL2 - items: - description: Main Oscillator (24 MHz) @@ -38,6 +41,9 @@ properties: - description: External I2S RX left/right channel clock - description: External TDM clock - description: External audio master clock + - description: PLL0 + - description: PLL1 + - description: PLL2 clock-names: oneOf: @@ -52,6 +58,9 @@ properties: - const: i2srx_lrck_ext - const: tdm_ext - const: mclk_ext + - const: pll0_out + - const: pll1_out + - const: pll2_out - items: - const: osc @@ -63,6 +72,9 @@ properties: - const: i2srx_lrck_ext - const: tdm_ext - const: mclk_ext + - const: pll0_out + - const: pll1_out + - const: pll2_out '#clock-cells': const: 1 @@ -93,12 +105,14 @@ examples: <&gmac1_rgmii_rxin>, <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, - <&tdm_ext>, <&mclk_ext>; + <&tdm_ext>, <&mclk_ext>, + <&pllclk 0>, <&pllclk 1>, <&pllclk 2>; clock-names = "osc", "gmac1_rmii_refin", "gmac1_rgmii_rxin", "i2stx_bclk_ext", "i2stx_lrck_ext", "i2srx_bclk_ext", "i2srx_lrck_ext", - "tdm_ext", "mclk_ext"; + "tdm_ext", "mclk_ext", + "pll0_out", "pll1_out", "pll2_out"; #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml new file mode 100644 index 000000000000..af77bd8c86b1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/starfive,jh7110-voutcrg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 Video-Output Clock and Reset Generator + +maintainers: + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-voutcrg + + reg: + maxItems: 1 + + clocks: + items: + - description: Vout Top core + - description: Vout Top Ahb + - description: Vout Top Axi + - description: Vout Top HDMI MCLK + - description: I2STX0 BCLK + - description: external HDMI pixel + + clock-names: + items: + - const: vout_src + - const: vout_top_ahb + - const: vout_top_axi + - const: vout_top_hdmitx0_mclk + - const: i2stx0_bclk + - const: hdmitx0_pixelclk + + resets: + maxItems: 1 + description: Vout Top core + + '#clock-cells': + const: 1 + description: + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices. + + '#reset-cells': + const: 1 + description: + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices. + + power-domains: + maxItems: 1 + description: + Vout domain power + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - '#clock-cells' + - '#reset-cells' + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + #include <dt-bindings/power/starfive,jh7110-pmu.h> + #include <dt-bindings/reset/starfive,jh7110-crg.h> + + voutcrg: clock-controller@295C0000 { + compatible = "starfive,jh7110-voutcrg"; + reg = <0x295C0000 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>, + <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>, + <&syscrg JH7110_SYSCLK_I2STX0_BCLK>, + <&hdmitx0_pixelclk>; + clock-names = "vout_src", "vout_top_ahb", + "vout_top_axi", "vout_top_hdmitx0_mclk", + "i2stx0_bclk", "hdmitx0_pixelclk"; + resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + power-domains = <&pwrc JH7110_PD_VOUT>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml index a4ec8dd5ddf1..95c1c6f8b755 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/ti,cdce925.yaml# diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml index 63d976341696..0a9d6a4c4b66 100644 --- a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml# diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt index e17425a58621..b33f641f1043 100644 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -8,7 +8,7 @@ parents, one of which can be selected as output. This clock does not gate or adjust the parent rate via a divider or multiplier. By default the "clocks" property lists the parents in the same order -as they are programmed into the regster. E.g: +as they are programmed into the register. E.g: clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>; diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt index 63f9f1ac3439..109ffa3a5b66 100644 --- a/Documentation/devicetree/bindings/clock/vf610-clock.txt +++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt @@ -9,7 +9,7 @@ Optional properties: - clocks: list of clock identifiers which are external input clocks to the given clock controller. Please refer the next section to find the input clocks for a given controller. -- clock-names: list of names of clocks which are exteral input clocks to the +- clock-names: list of names of clocks which are external input clocks to the given clock controller. Input clocks for top clock controller: diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml index 5cbb34d0b61b..1ba687d433b1 100644 --- a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml +++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml @@ -14,11 +14,16 @@ description: | reads required input clock frequencies from the devicetree and acts as clock provider for all clock consumers of PS clocks. -select: false - properties: compatible: - const: xlnx,versal-clk + oneOf: + - enum: + - xlnx,versal-clk + - xlnx,zynqmp-clk + - items: + - enum: + - xlnx,versal-net-clk + - const: xlnx,versal-clk "#clock-cells": const: 1 @@ -26,16 +31,12 @@ properties: clocks: description: List of clock specifiers which are external input clocks to the given clock controller. - items: - - description: reference clock - - description: alternate reference clock - - description: alternate reference clock for programmable logic + minItems: 3 + maxItems: 8 clock-names: - items: - - const: ref - - const: alt_ref - - const: pl_alt_ref + minItems: 3 + maxItems: 8 required: - compatible @@ -45,6 +46,61 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,versal-clk + + then: + properties: + clocks: + items: + - description: reference clock + - description: alternate reference clock + - description: alternate reference clock for programmable logic + + clock-names: + items: + - const: ref + - const: alt_ref + - const: pl_alt_ref + + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynqmp-clk + + then: + properties: + clocks: + minItems: 5 + items: + - description: PS reference clock + - description: reference clock for video system + - description: alternative PS reference clock + - description: auxiliary reference clock + - description: transceiver reference clock + - description: (E)MIO clock source (Optional clock) + - description: GEM emio clock (Optional clock) + - description: Watchdog external clock (Optional clock) + + clock-names: + minItems: 5 + items: + - const: pss_ref_clk + - const: video_clk + - const: pss_alt_ref_clk + - const: aux_ref_clk + - const: gt_crx_ref_clk + - pattern: "^mio_clk[00-77]+.*$" + - pattern: "gem[0-3]+_emio_clk.*$" + - pattern: "swdt[0-1]+_ext_clk.*$" + examples: - | firmware { @@ -59,4 +115,13 @@ examples: }; }; }; + + clock-controller { + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, + <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", + "aux_ref_clk", "gt_crx_ref_clk"; + }; ... diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt deleted file mode 100644 index 391ee1a60bed..000000000000 --- a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt +++ /dev/null @@ -1,63 +0,0 @@ --------------------------------------------------------------------------- -Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using -Zynq MPSoC firmware interface --------------------------------------------------------------------------- -The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock -tree. It reads required input clock frequencies from the devicetree and acts -as clock provider for all clock consumers of PS clocks. - -See clock_bindings.txt for more information on the generic clock bindings. - -Required properties: - - #clock-cells: Must be 1 - - compatible: Must contain: "xlnx,zynqmp-clk" - - clocks: List of clock specifiers which are external input - clocks to the given clock controller. Please refer - the next section to find the input clocks for a - given controller. - - clock-names: List of clock names which are exteral input clocks - to the given clock controller. Please refer to the - clock bindings for more details. - -Input clocks for zynqmp Ultrascale+ clock controller: - -The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock -inputs. These required clock inputs are: - - pss_ref_clk (PS reference clock) - - video_clk (reference clock for video system ) - - pss_alt_ref_clk (alternative PS reference clock) - - aux_ref_clk - - gt_crx_ref_clk (transceiver reference clock) - -The following strings are optional parameters to the 'clock-names' property in -order to provide an optional (E)MIO clock source: - - swdt0_ext_clk - - swdt1_ext_clk - - gem0_emio_clk - - gem1_emio_clk - - gem2_emio_clk - - gem3_emio_clk - - mio_clk_XX # with XX = 00..77 - - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51 - - -Output clocks are registered based on clock information received -from firmware. Output clocks indexes are mentioned in -include/dt-bindings/clock/xlnx-zynqmp-clk.h. - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - zynqmp_clk: clock-controller { - #clock-cells = <1>; - compatible = "xlnx,zynqmp-clk"; - clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; - clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 1c4d3eb87763..7c8a3e8430d3 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -30,6 +30,9 @@ properties: - const: samsung,usb-connector-11pin - const: usb-b-connector + reg: + maxItems: 1 + label: description: Symbolic name for the connector. @@ -224,13 +227,13 @@ properties: state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W - 5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during - SNK_DISCOVERY) and the actual currrent limit after reception of PS_Ready for PD link or during + SNK_DISCOVERY) and the actual current limit after reception of PS_Ready for PD link or during SNK_READY for non-pd link. type: boolean dependencies: - sink-vdos-v1: [ 'sink-vdos' ] - sink-vdos: [ 'sink-vdos-v1' ] + sink-vdos-v1: [ sink-vdos ] + sink-vdos: [ sink-vdos-v1 ] required: - compatible @@ -264,7 +267,7 @@ anyOf: - typec-power-opmode - new-source-frs-typec-current -additionalProperties: true +additionalProperties: false examples: # Micro-USB connector with HS lines routed via controller (MUIC). diff --git a/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml b/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml new file mode 100644 index 000000000000..16a448974561 --- /dev/null +++ b/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpu/nvidia,tegra186-ccplex-cluster.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 CCPLEX Cluster + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra186-ccplex-cluster + + reg: + maxItems: 1 + + nvidia,bpmp: + description: phandle to the BPMP used to query CPU frequency tables + $ref: /schemas/types.yaml#/definitions/phandle + +additionalProperties: false + +required: + - compatible + - reg + - nvidia,bpmp + +examples: + - | + ccplex@e000000 { + compatible = "nvidia,tegra186-ccplex-cluster"; + reg = <0x0e000000 0x400000>; + nvidia,bpmp = <&bpmp>; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index a6b3bb8fdf33..c1d225fcf2d5 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -49,6 +49,7 @@ properties: - description: Frequency domain 0 register region - description: Frequency domain 1 register region - description: Frequency domain 2 register region + - description: Frequency domain 3 register region reg-names: minItems: 1 @@ -56,6 +57,7 @@ properties: - const: freq-domain0 - const: freq-domain1 - const: freq-domain2 + - const: freq-domain3 clocks: items: @@ -69,7 +71,7 @@ properties: interrupts: minItems: 1 - maxItems: 3 + maxItems: 4 interrupt-names: minItems: 1 @@ -77,6 +79,7 @@ properties: - const: dcvsh-irq-0 - const: dcvsh-irq-1 - const: dcvsh-irq-2 + - const: dcvsh-irq-3 '#freq-domain-cells': const: 1 diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt deleted file mode 100644 index 1758051798fe..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ /dev/null @@ -1,132 +0,0 @@ -TI CPUFreq and OPP bindings -================================ - -Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx -families support different OPPs depending on the silicon variant in use. -The ti-cpufreq driver can use revision and an efuse value from the SoC to -provide the OPP framework with supported hardware information. This is -used to determine which OPPs from the operating-points-v2 table get enabled -when it is parsed by the OPP framework. - -Required properties: --------------------- -In 'cpus' nodes: -- operating-points-v2: Phandle to the operating-points-v2 table to use. - -In 'operating-points-v2' table: -- compatible: Should be - - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx, - omap34xx, omap36xx and am3517 SoCs -- syscon: A phandle pointing to a syscon node representing the control module - register space of the SoC. - -Optional properties: --------------------- -- "vdd-supply", "vbb-supply": to define two regulators for dra7xx -- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: Two bitfields indicating: - 1. Which revision of the SoC the OPP is supported by - 2. Which eFuse bits indicate this OPP is available - - A bitwise AND is performed against these values and if any bit - matches, the OPP gets enabled. - -Example: --------- - -/* From arch/arm/boot/dts/am33xx.dtsi */ -cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0>; - - operating-points-v2 = <&cpu0_opp_table>; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; -}; - -/* - * cpu0 has different OPPs depending on SoC revision and some on revisions - * 0x2 and 0x4 have eFuse bits that indicate if they are available or not - */ -cpu0_opp_table: opp-table { - compatible = "operating-points-v2-ti-cpu"; - syscon = <&scm_conf>; - - /* - * The three following nodes are marked with opp-suspend - * because they can not be enabled simultaneously on a - * single SoC. - */ - opp50-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <950000 931000 969000>; - opp-supported-hw = <0x06 0x0010>; - opp-suspend; - }; - - opp100-275000000 { - opp-hz = /bits/ 64 <275000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0x00FF>; - opp-suspend; - }; - - opp100-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0020>; - opp-suspend; - }; - - opp100-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp100-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0040>; - }; - - opp120-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp120-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x06 0x0080>; - }; - - oppturbo-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - oppturbo-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x06 0x0100>; - }; - - oppnitro-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1325000 1298500 1351500>; - opp-supported-hw = <0x04 0x0200>; - }; -}; diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index 92e1d76e29ee..7da9aa82d837 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - const: qcom,inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index bb828068c3b8..8e665d910e6e 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -34,6 +34,7 @@ properties: - enum: - qcom,ipq6018-qce - qcom,ipq8074-qce + - qcom,ipq9574-qce - qcom,msm8996-qce - qcom,qcm2290-qce - qcom,sdm845-qce diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index b767ec72a999..ac480765cde0 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -20,6 +20,7 @@ properties: - stericsson,ux500-hash - st,stm32f456-hash - st,stm32f756-hash + - st,stm32mp13-hash reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml index 77ec8bc70bf7..ff10a0838ad6 100644 --- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/crypto/ti,sa2ul.yaml# @@ -66,10 +66,22 @@ patternProperties: required: - compatible - reg - - power-domains - dmas - dma-names +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62-sa3ul + then: + properties: + power-domains: false + else: + required: + - power-domains + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml index e300df4b47f3..d27dcb2fef12 100644 --- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml +++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml @@ -18,7 +18,7 @@ description: | each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC). The Exynos PPMU driver uses the devfreq-event class to provide event data to various devfreq devices. The devfreq devices would use the event data when - derterming the current state of each IP. + determining the current state of each IP. properties: compatible: diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt index 0398aec488ac..923aea25344c 100644 --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt @@ -12,7 +12,7 @@ Required properties: Required children nodes: Children nodes are encoding available output ports and their connections - to external devices using the OF graph reprensentation (see ../graph.txt). + to external devices using the OF graph representation (see ../graph.txt). At least one port node is required. Optional properties in grandchild nodes: diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml index 0b51c64f141a..8747b95ec20d 100644 --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -11,7 +11,7 @@ maintainers: description: | This document defines device tree properties for the Synopsys DesignWare MIPI - DSI host controller. It doesn't constitue a device tree binding specification + DSI host controller. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by platform-specific device tree bindings. diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index 0521261b04a9..ae894d996d21 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -49,6 +49,9 @@ properties: description: | OF device-tree gpio specification for RSTX pin(active low system reset) + interrupts: + maxItems: 1 + toshiba,hpd-pin: $ref: /schemas/types.yaml#/definitions/uint32 enum: diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt index 0ab5f0663611..84c75f849891 100644 --- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt +++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt @@ -1,4 +1,4 @@ -* Currus Logic CLPS711X Framebuffer +* Cirrus Logic CLPS711X Framebuffer Required properties: - compatible: Shall contain "cirrus,ep7209-fb". diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index 7a7cf3fb3e6d..f12558960cd8 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -28,6 +28,7 @@ properties: - qcom,sm8350-dp - items: - enum: + - qcom,sm8250-dp - qcom,sm8450-dp - qcom,sm8550-dp - const: qcom,sm8350-dp @@ -79,7 +80,8 @@ properties: operating-points-v2: true - opp-table: true + opp-table: + type: object power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 01848bdd5873..c6dbab65d5f7 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml# @@ -27,6 +27,7 @@ properties: - qcom,sdm660-dsi-ctrl - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl + - qcom,sm6125-dsi-ctrl - qcom,sm6350-dsi-ctrl - qcom,sm6375-dsi-ctrl - qcom,sm8150-dsi-ctrl @@ -166,6 +167,10 @@ properties: description: Phandle to vdd regulator device node + refgen-supply: + description: + Phandle to REFGEN regulator device node + vcca-supply: description: Phandle to vdd regulator device node @@ -301,6 +306,7 @@ allOf: contains: enum: - qcom,msm8998-dsi-ctrl + - qcom,sm6125-dsi-ctrl - qcom,sm6350-dsi-ctrl then: properties: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index e6b00d7387ce..69d13867b7cf 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index a43e11d3b00d..52bbe132e6da 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml# @@ -19,6 +19,7 @@ properties: - qcom,dsi-phy-14nm-2290 - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 + - qcom,sm6125-dsi-phy-14nm reg: items: @@ -35,6 +36,16 @@ properties: vcca-supply: description: Phandle to vcca regulator device node. + power-domains: + description: + A phandle and PM domain specifier for an optional power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing the power domain's performance point. + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml index 9c1f9140c731..7e6687cb002b 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 62fb3e484eb2..288d8babb76a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml index 8e9031bbde73..dd6619555a12 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-7nm.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml index 0f6f08890e7e..6b57ce41c95f 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 58ca8912a8c3..56b9b247e8c2 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -15,6 +15,12 @@ properties: oneOf: - description: | The driver is parsing the compat string for Adreno to + figure out the chip-id. + items: + - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Adreno to figure out the gpu-id and patch level. items: - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$' diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml index ccd7d6417523..f69196e4cc76 100644 --- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/mdss-common.yaml# @@ -77,6 +77,12 @@ properties: items: - description: MDSS_CORE reset + memory-region: + maxItems: 1 + description: + Phandle to a node describing a reserved framebuffer memory region. + For example, the splash memory region set up by the bootloader. + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml index 2fe032d0e8f8..91c774f106ce 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml index db9f07c6142d..0999ea07f47b 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml# @@ -11,7 +11,7 @@ maintainers: - Rob Clark <robdclark@gmail.com> description: - This is the bindings documentation for the Mobile Display Subsytem(MDSS) that + This is the bindings documentation for the Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml index 8d3cd46260fb..d5a64c8a921f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml index 3c2b6ed98a56..e320ab1de6de 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml index 414f4e7ebdf1..be6cd8adb3b6 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml index 2995b84b2cd4..4184b84d4c21 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml index 630b11480496..8137618237ce 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml# @@ -15,6 +15,7 @@ properties: compatible: enum: - qcom,sc7180-dpu + - qcom,sm6125-dpu - qcom,sm6350-dpu - qcom,sm6375-dpu @@ -63,7 +64,9 @@ allOf: - if: properties: compatible: - const: qcom,sm6375-dpu + enum: + - qcom,sm6375-dpu + - qcom,sm6125-dpu then: properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml index 42ef06edddc4..3b9c103e504a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml index 26dc073bd19a..b0fbe86219d1 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml index 078e1d1a7d2f..43500dad66e7 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml index f2c8e16cf067..d19e3bec4600 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml index c239544bc37f..db680fb12b6a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml index 0f7765d832e7..b917064bdf33 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml index 6ecb00920d7f..d6d7ac1b2ef8 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml index bf62c2f5325a..510eb6c19364 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml index b9f83088f370..17221b62a642 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml new file mode 100644 index 000000000000..57f0e3647711 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6125 Display MDSS + +maintainers: + - Marijn Suijten <marijn.suijten@somainline.org> + +description: + SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6125-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6125-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6125-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6125-dsi-phy-14nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6125.h> + #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + compatible = "qcom,sm6125-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x400 0x0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6125-dpu"; + reg = <0x05e01000 0x83208>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + phy@5e94400 { + compatible = "qcom,sm6125-dsi-phy-14nm"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + required-opps = <&rpmpd_opp_nom>; + power-domains = <&rpmpd SM6125_VDDMX>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml index ed0ad194d4ce..db255b1f4c20 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml# @@ -131,13 +131,6 @@ examples: remote-endpoint = <&dsi0_in>; }; }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml index 76369a4f7c4d..30d36fffaedb 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml# @@ -132,13 +132,6 @@ examples: remote-endpoint = <&dsi0_in>; }; }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml index 2b3f3fe9bdf7..13146b3f053c 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml index 5182e958e069..54cdaa827cd3 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml index 687c8c170cd4..ffa5047e901f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml# @@ -54,7 +54,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8250-dpu"; @@ -72,7 +72,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml index 368d3db0ce96..e887f031b8be 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml# @@ -76,7 +76,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8250-mdss"; @@ -121,7 +121,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -196,7 +196,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -286,7 +286,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml index 120500395c9a..96ef2d9c3512 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml# @@ -51,7 +51,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8350.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8350-dpu"; @@ -76,7 +76,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml index 79a226e4cc6a..60d4aae1131b 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml# @@ -52,6 +52,12 @@ patternProperties: compatible: const: qcom,sm8350-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: @@ -75,7 +81,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8350.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8350-mdss"; @@ -128,7 +134,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -197,7 +203,7 @@ examples: <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&mdss_dsi0_phy>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml index 0d17ece1c453..2a5d3daed0e1 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml# @@ -58,7 +58,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8450.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8450-dpu"; @@ -83,7 +83,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml index f26eb5643aed..bb22940b9385 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml# @@ -42,6 +42,14 @@ patternProperties: compatible: const: qcom,sm8450-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8450-dp + - const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: @@ -68,7 +76,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8450.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8450-mdss"; @@ -122,7 +130,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -202,7 +210,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -297,7 +305,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml index ff58a747bb6f..16a541fca66f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml# @@ -57,7 +57,7 @@ examples: #include <dt-bindings/clock/qcom,sm8550-dispcc.h> #include <dt-bindings/clock/qcom,sm8550-gcc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8550-dpu"; @@ -82,7 +82,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml index 887be33ba108..48aea8005c86 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml# @@ -42,6 +42,14 @@ patternProperties: compatible: const: qcom,sm8550-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8550-dp + - const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: @@ -68,7 +76,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; @@ -122,7 +130,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -197,7 +205,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -286,7 +294,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml index 67682fe77f10..2e8dbdb5a3d5 100644 --- a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml @@ -19,6 +19,9 @@ description: | second port, therefore the ports must be marked accordingly (with either dual-lvds-odd-pixels or dual-lvds-even-pixels). +allOf: + - $ref: panel-common.yaml# + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index 1b2a1baa26f9..ffb35288ffbb 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index c5d1df680858..e7ab6224b52e 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -18,6 +18,7 @@ properties: - enum: - bananapi,lhr050h41 - feixin,k101-im2byl02 + - tdo,tl050hdv35 - wanchanglong,w552946aba - const: ilitek,ili9881c diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml index a4b8569ab81c..74ff772973d6 100644 --- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml index 9f97598efdfa..72463795e4c6 100644 --- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -20,7 +20,7 @@ description: | The panel itself contains: - AT24C16C EEPROM holding panel identification and timing requirements - AR1021 resistive touch screen controller (optional) - - FT5x6 capacitive touch screnn controller (optional) + - FT5x6 capacitive touch screen controller (optional) - GT911/GT928 capacitive touch screen controller (optional) The above chips share same I2C bus. The EEPROM is factory preprogrammed with diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml index ad7d3575190e..1e4f140f48b8 100644 --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index 5b38dc89cb21..0a57a31f4f3d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to several classes of - display panels. It doesn't constitue a device tree binding specification by + display panels. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. When referenced from panel device tree bindings the properties defined in this diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml index 4a36aa64c716..f8dc9929e833 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 929fe046d1e7..9f1016551e0b 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -40,6 +40,12 @@ properties: items: - enum: - auo,b101ew05 + # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel + - chunghwa,claa070wp03xg + # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel + - hannstar,hsd101pww2 + # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel + - hydis,hv070wx2-1e0 - tbs,a711-panel - const: panel-lvds diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index 2f0238b770eb..e808215cb39e 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml# @@ -66,6 +66,7 @@ properties: compatible: items: - enum: + - saef,sftc154b - sainsmart18 - shineworld,lh133k - const: panel-mipi-dbi-spi diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 90c04cff8281..73674baea75d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 1d4936fc5182..25b4589d4a58 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -103,8 +103,6 @@ properties: - cdtech,s070wv95-ct16 # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel - chefree,ch101olhlwh-002 - # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel - - chunghwa,claa070wp03xg # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - chunghwa,claa101wa01a # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel @@ -168,8 +166,6 @@ properties: - hannstar,hsd070pww1 # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel - hannstar,hsd100pxn1 - # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel - - hannstar,hsd101pww2 # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel - hit,tx23d38vm0caa # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel @@ -196,6 +192,8 @@ properties: - innolux,n116bge # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel - innolux,n125hce-gn1 + # InnoLux 15.6" FHD (1920x1080) TFT LCD panel + - innolux,g156hce-l01 # InnoLux 15.6" WXGA TFT LCD panel - innolux,n156bge-l21 # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml index e8ce2315631a..46fe1014ebc4 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index 150e81090af2..5ea74426b1d5 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml index fa6556363cca..ef162b51d010 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -15,17 +15,26 @@ allOf: properties: compatible: - const: sitronix,st7789v + enum: + - edt,et028013dma + - inanbo,t28cp45tn89-v17 + - jasonic,jt240mhqs-hwt-ek-e3 + - sitronix,st7789v reg: true reset-gpios: true power-supply: true backlight: true port: true + rotation: true spi-cpha: true spi-cpol: true + spi-rx-bus-width: + minimum: 0 + maximum: 1 + dc-gpios: maxItems: 1 description: DCX pin, Display data/command selection pin in parallel interface @@ -33,7 +42,6 @@ properties: required: - compatible - reg - - reset-gpios - power-supply unevaluatedProperties: false @@ -52,6 +60,7 @@ examples: reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; backlight = <&pwm_bl>; power-supply = <&power>; + rotation = <180>; spi-max-frequency = <100000>; spi-cpol; spi-cpha; diff --git a/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml new file mode 100644 index 000000000000..d817f998cddc --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel + +maintainers: + - Alexandre Mergnat <amergnat@baylibre.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: startek,kd070fhfid015 + + enable-gpios: true + + iovcc-supply: + description: Reference to the regulator powering the panel IO pins. + + reg: + maxItems: 1 + description: DSI virtual channel + + reset-gpios: true + + port: true + + power-supply: true + +additionalProperties: false + +required: + - compatible + - enable-gpios + - iovcc-supply + - reg + - reset-gpios + - port + - power-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "startek,kd070fhfid015"; + reg = <0>; + enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&mt6357_vsim1_reg>; + power-supply = <&vsys_lcm_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml new file mode 100644 index 000000000000..6ba323683921 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox R66451 AMOLED DSI Panel + +maintainers: + - Jessica Zhang <quic_jesszhan@quicinc.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,r66451 + + reg: + maxItems: 1 + description: DSI virtual channel + + vddio-supply: true + vdd-supply: true + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - reg + - vddio-supply + - vdd-supply + - reset-gpios + - port + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "visionox,r66451"; + reg = <0>; + vddio-supply = <&vreg_l12c_1p8>; + vdd-supply = <&vreg_l13c_3p0>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index 444ac2a4772d..fa745a6f4456 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml index 84562a5b710a..d5a8295106c1 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml# diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml index fba45091d909..b60b90472d42 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml index 94bb5ef567c6..20e2bd15d4d2 100644 --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml @@ -49,15 +49,15 @@ properties: solomon,height: $ref: /schemas/types.yaml#/definitions/uint32 - default: 16 description: - Height in pixel of the screen driven by the controller + Height in pixel of the screen driven by the controller. + The default value is controller-dependent. solomon,width: $ref: /schemas/types.yaml#/definitions/uint32 - default: 96 description: - Width in pixel of the screen driven by the controller + Width in pixel of the screen driven by the controller. + The default value is controller-dependent. solomon,page-offset: $ref: /schemas/types.yaml#/definitions/uint32 @@ -157,6 +157,10 @@ allOf: const: sinowealth,sh1106 then: properties: + width: + default: 132 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -171,6 +175,10 @@ allOf: - solomon,ssd1305 then: properties: + width: + default: 132 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -185,6 +193,10 @@ allOf: - solomon,ssd1306 then: properties: + width: + default: 128 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -199,6 +211,10 @@ allOf: - solomon,ssd1307 then: properties: + width: + default: 128 + height: + default: 39 solomon,dclk-div: default: 2 solomon,dclk-frq: @@ -215,6 +231,10 @@ allOf: - solomon,ssd1309 then: properties: + width: + default: 128 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml index 70f0e45c71d6..6f2e22471965 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml @@ -97,7 +97,7 @@ properties: # optional when driving an eDP output nvidia,dpaux: - description: phandle to a DispayPort AUX interface + description: phandle to a DisplayPort AUX interface $ref: /schemas/types.yaml#/definitions/phandle allOf: diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index b6b402f16161..ae09cd3cbce1 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -12,14 +12,18 @@ maintainers: - Tomi Valkeinen <tomi.valkeinen@ti.com> description: | - The AM65x TI Keystone Display SubSystem with two output ports and - two video planes. The first video port supports OLDI and the second - supports DPI format. The fist plane is full video plane with all - features and the second is a "lite plane" without scaling support. + The AM625 and AM65x TI Keystone Display SubSystem with two output + ports and two video planes. In AM65x DSS, the first video port + supports 1 OLDI TX and in AM625 DSS, the first video port output is + internally routed to 2 OLDI TXes. The second video port supports DPI + format. The first plane is full video plane with all features and the + second is a "lite plane" without scaling support. properties: compatible: - const: ti,am65x-dss + enum: + - ti,am625-dss + - ti,am65x-dss reg: description: @@ -80,7 +84,9 @@ properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: - The DSS OLDI output port node form video port 1 + For AM65x DSS, the OLDI output port node from video port 1. + For AM625 DSS, the internal DPI output port node from video + port 1. port@1: $ref: /schemas/graph.yaml#/properties/port diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml index 37400496e086..d9cca3006e73 100644 --- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml +++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml @@ -68,7 +68,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: > Bitmask of channels to reserve for devices that need a specific - channel. These channels will only be assigned when explicitely + channel. These channels will only be assigned when explicitly requested by a client. The primary use for this is channels 0 and 1, which can be configured to have special behaviour for NAND/BCH when using programmable firmware. diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt index c6908e7c42cc..447fb44e7abe 100644 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt @@ -2,7 +2,7 @@ Required properties: - compatible: Should be "nvidia,<chip>-apbdma" -- reg: Should contain DMA registers location and length. This shuld include +- reg: Should contain DMA registers location and length. This should include all of the per-channel registers. - interrupts: Should contain all of the per-channel DMA interrupts. - clocks: Must contain one entry, for the module clock. diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml index f1ddcf672261..4f5510b6fa02 100644 --- a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml @@ -48,7 +48,7 @@ properties: qcom,controlled-remotely: type: boolean description: - Indicates that the bam is controlled by remote proccessor i.e. execution + Indicates that the bam is controlled by remote processor i.e. execution environment. qcom,ee: diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml index 1e5752b19a49..7b94d24d5ef4 100644 --- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml +++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml @@ -148,7 +148,7 @@ properties: memcpy-channels: $ref: /schemas/types.yaml#/definitions/uint32-array description: Array of u32 elements indicating which channels on the DMA - engine are elegible for memcpy transfers + engine are eligible for memcpy transfers required: - "#dma-cells" diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 84af0d5f52aa..98139489d4b5 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/eeprom/at24.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/eeprom/at24.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: I2C EEPROMs compatible with Atmel's AT24 @@ -102,6 +102,9 @@ properties: # These are special cases that don't conform to the above pattern. # Each requires a standard at24 model as fallback. - items: + - const: belling,bl24c16a + - const: atmel,24c16 + - items: - enum: - rohm,br24g01 - rohm,br24t01 diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 0e31bb36ebb1..1715b0c9feea 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: "http://devicetree.org/schemas/eeprom/at25.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/eeprom/at25.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: SPI EEPROMs or FRAMs compatible with Atmel's AT25 diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml index 2c8cf6aab19a..6b80518cbf62 100644 --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device maintainers: - - Guru Das Srinagesh <gurus@codeaurora.org> + - Guru Das Srinagesh <quic_gurus@quicinc.com> description: | Some Qualcomm PMICs have a "misc" module that can be used to detect when diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 9a785bbaafb7..e6bed7d93e2d 100644 --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx Network Processing Engine diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml index 833c07f1685c..c43d17f6e96b 100644 --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml @@ -57,8 +57,11 @@ description: | "#address-cells" or "#size-cells" property. The shared memory area for the IPC TX and RX between CPU and BPMP are - predefined and work on top of sysram, which is an SRAM inside the - chip. See ".../sram/sram.yaml" for the bindings. + predefined and work on top of either sysram, which is an SRAM inside the + chip, or in normal SDRAM. + See ".../sram/sram.yaml" for the bindings for the SRAM case. + See "../reserved-memory/nvidia,tegra264-bpmp-shmem.yaml" for bindings for + the SDRAM case. properties: compatible: @@ -81,6 +84,11 @@ properties: minItems: 2 maxItems: 2 + memory-region: + description: phandle to reserved memory region used for IPC between + CPU-NS and BPMP. + maxItems: 1 + "#clock-cells": const: 1 @@ -115,10 +123,15 @@ properties: additionalProperties: false +oneOf: + - required: + - memory-region + - required: + - shmem + required: - compatible - mboxes - - shmem - "#clock-cells" - "#power-domain-cells" - "#reset-cells" @@ -165,8 +178,7 @@ examples: <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>; interconnect-names = "read", "write", "dma-mem", "dma-write"; iommus = <&smmu TEGRA186_SID_BPMP>; - mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB - TEGRA_HSP_DB_MASTER_BPMP>; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>; #clock-cells = <1>; #power-domain-cells = <1>; @@ -184,3 +196,20 @@ examples: #thermal-sensor-cells = <1>; }; }; + + - | + #include <dt-bindings/mailbox/tegra186-hsp.h> + + bpmp { + compatible = "nvidia,tegra186-bpmp"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>; + interconnect-names = "read", "write", "dma-mem", "dma-write"; + mboxes = <&hsp_top1 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; + memory-region = <&dram_cpu_bpmp_mail>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index bdbee58a542b..4233ea839bfc 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -176,6 +176,7 @@ allOf: contains: enum: - qcom,scm-qdu1000 + - qcom,scm-sc8280xp - qcom,scm-sm8450 - qcom,scm-sm8550 then: diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml index 910bebe6cfa8..822864488dcb 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml @@ -38,6 +38,9 @@ properties: - smc - hvc + "#power-domain-cells": + const: 1 + versal_fpga: $ref: /schemas/fpga/xlnx,versal-fpga.yaml# description: Compatible of the FPGA device. @@ -66,6 +69,17 @@ additionalProperties: false examples: - | + #include <dt-bindings/power/xlnx-zynqmp-power.h> + firmware { + zynqmp_firmware: zynqmp-firmware { + #power-domain-cells = <1>; + }; + }; + + sata { + power-domains = <&zynqmp_firmware PD_SATA>; + }; + versal-firmware { compatible = "xlnx,versal-firmware"; method = "smc"; diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt index 6694ef29a267..528df8a0e6d8 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt +++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt @@ -63,7 +63,7 @@ FPGA Bridge will be disabled. * During Partial Reconfiguration of a specific region, that region's bridge will be used to gate the busses. Traffic to other regions is not affected. - * In some implementations, the FPGA Manager transparantly handles gating the + * In some implementations, the FPGA Manager transparently handles gating the buses, eliminating the need to show the hardware FPGA bridges in the device tree. * An FPGA image may create a set of reprogrammable regions, each having its @@ -466,7 +466,7 @@ It is beyond the scope of this document to fully describe all the FPGA design constraints required to make partial reconfiguration work[1] [2] [3], but a few deserve quick mention. -A persona must have boundary connections that line up with those of the partion +A persona must have boundary connections that line up with those of the partition or region it is designed to go into. During programming, transactions through those connections must be stopped and diff --git a/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml b/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml new file mode 100644 index 000000000000..25b3198c4d3e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/adi,ds4520-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DS4520 I2C GPIO expander + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +properties: + compatible: + enum: + - adi,ds4520-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + ngpios: + minimum: 1 + maximum: 9 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - ngpios + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gpio@50 { + compatible = "adi,ds4520-gpio"; + reg = <0x50>; + ngpios = <9>; + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt deleted file mode 100644 index 4a63bc96b687..000000000000 --- a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt +++ /dev/null @@ -1,52 +0,0 @@ -Broadcom Kona Family GPIO -========================= - -This GPIO driver is used in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 - -The Broadcom GPIO Controller IP can be configured prior to synthesis to -support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The -GPIO controller only supports edge, not level, triggering of interrupts. - -Required properties -------------------- - -- compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio" -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt outputs from the controller. There is one GPIO - interrupt per GPIO bank. The number of interrupts listed depends on the - number of GPIO banks on the SoC. The interrupts must be ordered by bank, - starting with bank 0. There is always a 1:1 mapping between banks and - IRQs. -- #gpio-cells: Should be <2>. The first cell is the pin number, the second - cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted) - See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. -- #interrupt-cells: Should be <2>. The first cell is the GPIO number. The - second cell is used to specify flags. The following subset of flags is - supported: - - trigger type (bits[1:0]): - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 3 = low-to-high or high-to-low edge triggered - Valid values are 1, 2, 3 - See also .../devicetree/bindings/interrupt-controller/interrupts.txt. -- gpio-controller: Marks the device node as a GPIO controller. -- interrupt-controller: Marks the device node as an interrupt controller. - -Example: - gpio: gpio@35003000 { - compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; - reg = <0x35003000 0x800>; - interrupts = - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml new file mode 100644 index 000000000000..296fdd6b8f38 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/brcm,kona-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family GPIO controller + +description: + The Broadcom GPIO Controller IP can be configured prior to synthesis to + support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The + GPIO controller only supports edge, not level, triggering of interrupts. + +maintainers: + - Ray Jui <rjui@broadcom.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm11351-gpio + - brcm,bcm21664-gpio + - brcm,bcm23550-gpio + - const: brcm,kona-gpio + + reg: + maxItems: 1 + + interrupts: + minItems: 4 + maxItems: 6 + description: + The interrupt outputs from the controller. There is one GPIO interrupt + per GPIO bank. The number of interrupts listed depends on the number of + GPIO banks on the SoC. The interrupts must be ordered by bank, starting + with bank 0. There is always a 1:1 mapping between banks and IRQs. + + '#gpio-cells': + const: 2 + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + interrupt-controller: true + +required: + - compatible + - reg + - interrupts + - '#gpio-cells' + - '#interrupt-cells' + - gpio-controller + - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm11351-gpio + then: + properties: + interrupts: + minItems: 6 + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm21664-gpio + - brcm,bcm23550-gpio + then: + properties: + interrupts: + maxItems: 4 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gpio@35003000 { + compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; + reg = <0x35003000 0x800>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; +... diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml index ae18603697d7..d0ca2af89f1e 100644 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml @@ -32,10 +32,12 @@ properties: - fsl,imx6sx-gpio - fsl,imx6ul-gpio - fsl,imx7d-gpio + - fsl,imx8dxl-gpio - fsl,imx8mm-gpio - fsl,imx8mn-gpio - fsl,imx8mp-gpio - fsl,imx8mq-gpio + - fsl,imx8qm-gpio - fsl,imx8qxp-gpio - fsl,imxrt1050-gpio - fsl,imxrt1170-gpio diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml index fa116148ee90..99febb8ea1b6 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -66,6 +66,7 @@ properties: - ti,tca6408 - ti,tca6416 - ti,tca6424 + - ti,tca9538 - ti,tca9539 - ti,tca9554 diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt index e90fb987e25f..7ddf292db144 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt @@ -27,7 +27,7 @@ Required properties: - gpio-controller: Marks the device node as a GPIO controller. - interrupts: The EXT_INT_0 parent interrupt resource must be listed first. - interrupt-cells: Should be two. - - first cell is 0-N coresponding for EXT_INT_0 to EXT_INT_N. + - first cell is 0-N corresponding for EXT_INT_0 to EXT_INT_N. - second cell is used to specify flags. - interrupt-controller: Marks the device node as an interrupt controller. - apm,nr-gpios: Optional, specify number of gpios pin. diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt deleted file mode 100644 index 966514744df4..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Oxford Semiconductor OXNAS SoC GPIO Controller - -Please refer to gpio.txt for generic information regarding GPIO bindings. - -Required properties: - - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio" - - reg: Base address and length for the device. - - interrupts: The port interrupt shared by all pins. - - gpio-controller: Marks the port as GPIO controller. - - #gpio-cells: Two. The first cell is the pin number and - the second cell is used to specify the gpio polarity as defined in - defined in <dt-bindings/gpio/gpio.h>: - 0 = GPIO_ACTIVE_HIGH - 1 = GPIO_ACTIVE_LOW - - interrupt-controller: Marks the device node as an interrupt controller. - - #interrupt-cells: Two. The first cell is the GPIO number and second cell - is used to specify the trigger type as defined in - <dt-bindings/interrupt-controller/irq.h>: - IRQ_TYPE_EDGE_RISING - IRQ_TYPE_EDGE_FALLING - IRQ_TYPE_EDGE_BOTH - - gpio-ranges: Interaction with the PINCTRL subsystem, it also specifies the - gpio base and count, should be in the format of numeric-gpio-range as - specified in the gpio.txt file. - -Example: - -gpio0: gpio@0 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x000000 0x100000>; - interrupts = <21>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&pinctrl 0 0 32>; -}; - -keys { - ... - - button-esc { - label = "ESC"; - linux,code = <1>; - gpios = <&gpio0 12 0>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index b391cc1b4590..eefe7b345286 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -9,7 +9,7 @@ title: Synopsys DesignWare APB GPIO controller description: | Synopsys DesignWare GPIO controllers have a configurable number of ports, each of which are intended to be represented as child nodes with the generic - GPIO-controller properties as desribed in this bindings file. + GPIO-controller properties as described in this bindings file. maintainers: - Hoan Tran <hoan@os.amperecomputing.com> @@ -61,6 +61,10 @@ patternProperties: '#gpio-cells': const: 2 + gpio-line-names: + minItems: 1 + maxItems: 32 + ngpios: default: 32 minimum: 1 diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml index 22c0cae73425..4555f1644a4d 100644 --- a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml @@ -28,6 +28,10 @@ properties: gpio-controller: true + gpio-line-names: + minItems: 1 + maxItems: 24 + interrupt-controller: true st,norequest-mask: diff --git a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml index bd721c839059..7b75d2f92f1b 100644 --- a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml @@ -58,14 +58,14 @@ properties: deprecated: true description: Name of the hwmod associated with the GPIO. Needed on some legacy OMAP - SoCs which have not been converted to the ti,sysc interconnect hierarachy. + SoCs which have not been converted to the ti,sysc interconnect hierarchy. ti,no-reset-on-init: $ref: /schemas/types.yaml#/definitions/flag deprecated: true description: Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which - have not been converted to the ti,sysc interconnect hierarachy. + have not been converted to the ti,sysc interconnect hierarchy. patternProperties: "^(.+-hog(-[0-9]+)?)$": diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml index 1638cfe90f1c..5eeb29bcdd21 100644 --- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: X-Powers AXP209 GPIO diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml index 18e61aff2185..56143f1fe84a 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ZynqMP Mode Pin GPIO controller diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml index a36aec27069c..59c79a6943ec 100644 --- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Bootlin %YAML 1.2 --- -$id: "http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Xylon LogiCVC GPIO controller diff --git a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml index 38478dad8b25..584cce3211c0 100644 --- a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml +++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/hwlock/allwinner,sun6i-a31-hwspinlock.yaml# diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml index 0a955c7b9706..5ba60d532fcd 100644 --- a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml +++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/hwlock/ti,omap-hwspinlock.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml index ca2b47320689..2e45364d0543 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml @@ -27,7 +27,7 @@ properties: shunt-resistor-micro-ohms: description: - The value of curent sense resistor in microohms. If not provided, + The value of current sense resistor in microohms. If not provided, the current reading and overcurrent alert is disabled. adi,shutdown-threshold-microamp: diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 0cf3ed6212a6..6751f9b643b4 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -11,7 +11,7 @@ maintainers: - Nuno Sá <nuno.sa@analog.com> description: |+ - Bindings for the Analog Devices AXI FAN Control driver. Spefications of the + Bindings for the Analog Devices AXI FAN Control driver. Specifications of the core can be found in: https://wiki.analog.com/resources/fpga/docs/axi_fan_control diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml index b39c632956e8..0ad12d245656 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml @@ -46,7 +46,7 @@ patternProperties: shunt-resistor-micro-ohms: description: - The value of curent sense resistor in microohms. + The value of current sense resistor in microohms. required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt index 3ac02988a1a5..8645cd3b867a 100644 --- a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -45,7 +45,7 @@ Required properties for each child node: - aspeed,fan-tach-ch : should specify the Fan tach input channel. integer value in the range 0 through 15, with 0 indicating Fan tach channel 0 and 15 indicating Fan tach channel 15. - Atleast one Fan tach input channel is required. + At least one Fan tach input channel is required. Examples: diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml index c54b5986b365..e5b24782f448 100644 --- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/hwmon/iio-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: ADC-attached Hardware Sensor diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml index 0e49b3901161..bf3332153ad8 100644 --- a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml +++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml index b1a4c235376e..e62aff670478 100644 --- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml index 8226e3b5d028..0b69897f0c63 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/lm75.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt index e1b79903f204..758ff398b67b 100644 --- a/Documentation/devicetree/bindings/hwmon/lm87.txt +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt @@ -18,7 +18,7 @@ optional properties: in7. Otherwise the pin is set as FAN2 input. - vcc-supply: a Phandle for the regulator supplying power, can be - cofigured to measure 5.0V power supply. Default is 3.3V. + configured to measure 5.0V power supply. Default is 3.3V. Example: diff --git a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt index 33fd00a987c7..473b34c876dd 100644 --- a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt +++ b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt @@ -1,4 +1,4 @@ -Lantiq cpu temperatur sensor +Lantiq cpu temperature sensor Requires node properties: - compatible value : diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml index 028d6e570131..f5e104c1b0d0 100644 --- a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml +++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index ae4f68d4e696..56db2292f062 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -42,7 +42,7 @@ properties: reg: items: - description: PVT common registers - - description: PVT temprature sensor registers + - description: PVT temperature sensor registers - description: PVT process detector registers - description: PVT voltage monitor registers @@ -105,7 +105,7 @@ properties: G coefficient for temperature equation. Default for series 5 = 60000 Default for series 6 = 57400 - multipleOf: 1000 + multipleOf: 100 minimum: 1000 $ref: /schemas/types.yaml#/definitions/uint32 @@ -114,7 +114,7 @@ properties: H coefficient for temperature equation. Default for series 5 = 200000 Default for series 6 = 249400 - multipleOf: 1000 + multipleOf: 100 minimum: 1000 $ref: /schemas/types.yaml#/definitions/uint32 @@ -131,7 +131,7 @@ properties: J coefficient for temperature equation. Default for series 5 = -100 Default for series 6 = 0 - multipleOf: 1000 + multipleOf: 100 maximum: 0 $ref: /schemas/types.yaml#/definitions/int32 diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml index 7b9d48d6d6da..6e59c8fdef30 100644 --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/national,lm90.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt index 28f43e929f6d..8523777f560c 100644 --- a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt @@ -23,7 +23,7 @@ Required properties for pwm-fan node fan subnode format: =================== Under fan subnode can be upto 8 child nodes, each child node representing a fan. -Each fan subnode must have one PWM channel and atleast one Fan tach channel. +Each fan subnode must have one PWM channel and at least one Fan tach channel. For PWM channel can be configured cooling-levels to create cooling device. Cooling device could be bound to a thermal zone for the thermal control. diff --git a/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml index 306f67315835..48d654e52114 100644 --- a/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml +++ b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/nxp,mc34vr500.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml index 80df7182ea28..14ac783c9a5f 100644 --- a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml +++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml index 159238efa9ed..3d14d5fc96c5 100644 --- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -13,7 +13,7 @@ description: | The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors designed especially for battery-driven high-volume consumer electronics applications. - For further information refere to Documentation/hwmon/shtc1.rst + For further information refer to Documentation/hwmon/shtc1.rst This binding document describes the binding for the hardware monitor portion of the driver. diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml index f5b34528928d..733cba780186 100644 --- a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml +++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml @@ -27,8 +27,8 @@ properties: clock-names: items: - - const: "sense" - - const: "bus" + - const: sense + - const: bus '#thermal-sensor-cells': const: 0 @@ -39,8 +39,8 @@ properties: reset-names: items: - - const: "sense" - - const: "bus" + - const: sense + - const: bus required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml index c5a889e3e27b..7e5b62a0215d 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml index dcbc6fbc3b48..8b5307c875ff 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml# diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index fde5225ce012..cdd1489e0c54 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -33,7 +33,7 @@ properties: shunt-resistor-micro-ohms: description: | - If 0, the calibration process will be skiped and the current and power + If 0, the calibration process will be skipped and the current and power measurement engine will not work. Temperature and voltage measurement will continue to work. The shunt value also need to respect: rshunt <= pga-gain * 40 * 1000 * 1000. diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml index bce68a326919..ebc8d466c1aa 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml @@ -26,7 +26,7 @@ properties: maxItems: 1 shunt-resistor-micro-ohms: - description: The value of curent sense resistor in microohms. + description: The value of current sense resistor in microohms. default: 255000 minimum: 250000 maximum: 255000 diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt index 60b7cda15dd2..7b6b3b8d0d11 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt @@ -10,7 +10,7 @@ Required properties: "source" for I2C source (parent) clock, "enable" for I2C module enable clock. - clocks: Should contain a clock specifier for each entry in clock-names. -- clock-frequency: Constains desired I2C bus clock frequency in Hz. +- clock-frequency: Contains desired I2C bus clock frequency in Hz. - #address-cells: Should be 1 to describe address cells for I2C device address. - #size-cells: Should be 0 means no size cell for I2C device address. diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml index c002afdbfc7c..5dda8cb44cdb 100644 --- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml +++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: MIPI I3C HCI diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml index c8659c5eba2a..cb31e75ba680 100644 --- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -36,8 +36,8 @@ properties: maxItems: 2 items: enum: - - "INT1" - - "INT2" + - INT1 + - INT2 required: - compatible diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml index e6a1f915b542..1f30a8569187 100644 --- a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml @@ -56,8 +56,8 @@ properties: String corresponding to an identifier from atmel,adc-res-names property. If not specified, the highest resolution will be used. enum: - - "lowres" - - "highres" + - lowres + - highres atmel,adc-sleep-mode: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml index be93c109d6ac..8cbad7e792b6 100644 --- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -57,7 +57,7 @@ description: | |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage |28 |PS Auxiliary voltage measurement (supply6). |Voltage |29 |PL VCCADC voltage measurement (vccams). |Voltage - |30 |Differential analog input signal voltage measurment. |Voltage + |30 |Differential analog input signal voltage measurement. |Voltage |31 |VUser0 voltage measurement (supply7). |Voltage |32 |VUser1 voltage measurement (supply8). |Voltage |33 |VUser2 voltage measurement (supply9). |Voltage diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml index 72d2e910f206..2594fa192f93 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml @@ -216,7 +216,6 @@ properties: description: Whether to enable burnout current for EXT1. adi,ext1-burnout-current-nanoamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Burnout current in nanoamps to be applied to EXT1. enum: [0, 50, 500, 1000, 10000] @@ -233,7 +232,6 @@ properties: description: Whether to enable burnout current for EXT2. adi,ext2-burnout-current-nanoamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Burnout current in nanoamps to be applied to EXT2. enum: [0, 50, 500, 1000, 10000] default: 0 @@ -249,7 +247,6 @@ properties: description: Whether to enable burnout current for VIOUT. adi,viout-burnout-current-nanoamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Burnout current in nanoamps to be applied to VIOUT. enum: [0, 1000, 10000] default: 0 diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml index 2155d3f5666c..3d7074fd17be 100644 --- a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml +++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog device AD7150 and similar capacitance to digital convertors. +title: Analog device AD7150 and similar capacitance to digital converters. maintainers: - Jonathan Cameron <jic23@kernel.org> diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml index f845b41d74c4..b3a10af86d76 100644 --- a/Documentation/devicetree/bindings/iio/common.yaml +++ b/Documentation/devicetree/bindings/iio/common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to several iio - sensors. It doesn't constitue a device tree binding specification by itself but + sensors. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. When referenced from sensor tree bindings the properties defined in this diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml index ab86daa2c56e..d17601dbc498 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml @@ -33,7 +33,7 @@ properties: items: - const: lo_in description: - External clock that provides the Local Oscilator input. + External clock that provides the Local Oscillator input. vcm-supply: description: diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index a2bc1fa92da0..79e75a8675cb 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -10,7 +10,7 @@ maintainers: - Eugene Zaikonnikov <ez@norophonic.com> description: | - Relative humidity and tempereature sensors on I2C bus + Relative humidity and temperature sensors on I2C bus Datasheets are available at: http://www.ti.com/product/HDC2010/datasheet diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml index c0a923febf13..b31f8120f14e 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -47,7 +47,7 @@ properties: reset-gpios: description: Optional GPIO for resetting the device. - If not present the device is not resetted during the probe. + If not present the device is not reset during the probe. maxItems: 1 honeywell,pmin-pascal: diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml index c999994e19e3..9567993ce480 100644 --- a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml @@ -10,7 +10,7 @@ maintainers: - Matt Ranostay <matt.ranostay@konsulko.com> description: - This lightening distance sensor uses an I2C or SPI interface. The + This lightning distance sensor uses an I2C or SPI interface. The binding currently only covers the SPI option. properties: diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index e450821a741d..fff7e3d83a02 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -97,7 +97,7 @@ properties: interrupts: description: interrupt line(s) connected to the DRDY line(s) and/or the - Intertial interrupt lines INT1 and INT2 if these exist. This means up to + Inertial interrupt lines INT1 and INT2 if these exist. This means up to three interrupts, and the DRDY must be the first one if it exists on the package. The trigger edge of the interrupts is sometimes software configurable in the hardware so the operating system should parse this diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml index 2a9bb6ace021..24dc2d69613f 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/input/elan,ekth3000.yaml# diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml index 05e6f2df604c..3e2d216c6432 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -13,6 +13,9 @@ description: Supports the Elan eKTH6915 touchscreen controller. This touchscreen controller uses the i2c-hid protocol with a reset GPIO. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: items: @@ -24,6 +27,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index 1edad1da1196..358cb8275bf1 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -14,6 +14,9 @@ description: This touchscreen uses the i2c-hid protocol but has some non-standard power sequencing required. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: oneOf: @@ -30,6 +33,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: true diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml index 7156b08f7645..138caad96a29 100644 --- a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml @@ -44,6 +44,8 @@ properties: description: HID descriptor address $ref: /schemas/types.yaml#/definitions/uint32 + panel: true + post-power-on-delay-ms: description: Time required by the device after enabling its regulators or powering it on, before it is ready for communication. diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt deleted file mode 100644 index 9afffbdf6e28..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt +++ /dev/null @@ -1,56 +0,0 @@ -Synaptics RMI4 2D Sensor Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices which contain 2D sensors using Function 11 or -Function 12. Complete documentation for transports and other functions -can be found in: -Documentation/devicetree/bindings/input/rmi4. - -RMI4 Function 11 and Function 12 are for 2D touch position sensing. -Additional documentation for F11 can be found at: -http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf - -Optional Touch Properties: -Description in Documentation/devicetree/bindings/input/touchscreen -- touchscreen-inverted-x -- touchscreen-inverted-y -- touchscreen-swapped-x-y -- touchscreen-x-mm -- touchscreen-y-mm - -Optional Properties: -- syna,clip-x-low: Sets a minimum value for X. -- syna,clip-y-low: Sets a minimum value for Y. -- syna,clip-x-high: Sets a maximum value for X. -- syna,clip-y-high: Sets a maximum value for Y. -- syna,offset-x: Add an offset to X. -- syna,offset-y: Add an offset to Y. -- syna,delta-x-threshold: Set the minimum distance on the X axis required - to generate an interrupt in reduced reporting - mode. -- syna,delta-y-threshold: Set the minimum distance on the Y axis required - to generate an interrupt in reduced reporting - mode. -- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad. -- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to - disable reporing absolute position data. -- syna,rezero-wait-ms: Time in miliseconds to wait after issuing a rezero - command. - - -Example of a RMI4 I2C device with F11: -Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - - ... - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt deleted file mode 100644 index 079cad2b6843..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt +++ /dev/null @@ -1,39 +0,0 @@ -Synaptics RMI4 F01 Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices which contain Function 1. Complete documentation -for transports and other functions can be found in: -Documentation/devicetree/bindings/input/rmi4. - -Additional documentation for F01 can be found at: -http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf - -Optional Properties: -- syna,nosleep-mode: If set the device will run at full power without sleeping. - nosleep has 3 modes, 0 will not change the default - setting, 1 will disable nosleep (allow sleeping), - and 2 will enable nosleep (disabling sleep). -- syna,wakeup-threshold: Defines the amplitude of the disturbance to the - background capacitance that will cause the - device to wake from dozing. -- syna,doze-holdoff-ms: The delay to wait after the last finger lift and the - first doze cycle. -- syna,doze-interval-ms: The time period that the device sleeps between finger - activity. - - -Example of a RMI4 I2C device with F01: - Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - - ... - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt deleted file mode 100644 index dcb012f5b3ee..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt +++ /dev/null @@ -1,61 +0,0 @@ -Synaptics RMI4 I2C Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices using the I2C transport driver. Complete documentation -for other transports and functions can be found in -Documentation/devicetree/bindings/input/rmi4. - -Required Properties: -- compatible: syna,rmi4-i2c -- reg: I2C address -- #address-cells: Set to 1 to indicate that the function child nodes - consist of only on uint32 value. -- #size-cells: Set to 0 to indicate that the function child nodes do not - have a size property. - -Optional Properties: -- interrupts: interrupt which the rmi device is connected to. -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- syna,reset-delay-ms: The number of milliseconds to wait after resetting the - device. - -- syna,startup-delay-ms: The number of milliseconds to wait after powering on - the device. - -- vdd-supply: VDD power supply. -See ../regulator/regulator.txt - -- vio-supply: VIO power supply -See ../regulator/regulator.txt - -Function Parameters: -Parameters specific to RMI functions are contained in child nodes of the rmi device - node. Documentation for the parameters of each function can be found in: -Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. - - - -Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio>; - interrupts = <4 2>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt deleted file mode 100644 index 632f473db65b..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt +++ /dev/null @@ -1,56 +0,0 @@ -Synaptics RMI4 SPI Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices using the SPI transport driver. Complete documentation -for other transports and functions can be found in -Documentation/devicetree/bindings/input/rmi4. - -Required Properties: -- compatible: syna,rmi4-spi -- reg: Chip select address for the device -- #address-cells: Set to 1 to indicate that the function child nodes - consist of only on uint32 value. -- #size-cells: Set to 0 to indicate that the function child nodes do not - have a size property. - -Optional Properties: -- interrupts: interrupt which the rmi device is connected to. -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- spi-rx-delay-us: microsecond delay after a read transfer. -- spi-tx-delay-us: microsecond delay after a write transfer. - -Function Parameters: -Parameters specific to RMI functions are contained in child nodes of the rmi device - node. Documentation for the parameters of each function can be found in: -Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. - - - -Example: - spi@7000d800 { - rmi4-spi-dev@0 { - compatible = "syna,rmi4-spi"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <4000000>; - spi-cpha; - spi-cpol; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(K, 2) 0x2>; - spi-rx-delay-us = <30>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml new file mode 100644 index 000000000000..4d4e1a8e36be --- /dev/null +++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml @@ -0,0 +1,271 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/syna,rmi4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics RMI4 compliant devices + +maintainers: + - Jason A. Donenfeld <Jason@zx2c4.com> + - Matthias Schiffer <matthias.schiffer@ew.tq-group.com + - Vincent Huang <vincent.huang@tw.synaptics.com> + +description: | + The Synaptics RMI4 (Register Mapped Interface 4) core is able to support RMI4 + devices using different transports (I2C, SPI) and different functions (e.g. + Function 1, 2D sensors using Function 11 or 12). + +properties: + compatible: + enum: + - syna,rmi4-i2c + - syna,rmi4-spi + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: Active low signal + + spi-cpha: true + spi-cpol: true + + syna,reset-delay-ms: + description: + Delay to wait after resetting the device. + + syna,startup-delay-ms: + description: + Delay to wait after powering on the device. + + vdd-supply: true + vio-supply: true + + rmi4-f01@1: + type: object + additionalProperties: false + description: + Function 1 + + properties: + reg: + maxItems: 1 + + syna,nosleep-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + If set the device will run at full power without sleeping. nosleep + has 3 modes, 0 will not change the default setting, 1 will disable + nosleep (allow sleeping), and 2 will enable nosleep (disabling + sleep). + + syna,wakeup-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the amplitude of the disturbance to the background + capacitance that will cause the device to wake from dozing. + + syna,doze-holdoff-ms: + description: + The delay to wait after the last finger lift and the first doze + cycle. + + syna,doze-interval-ms: + description: + The time period that the device sleeps between finger activity. + + required: + - reg + +patternProperties: + "^rmi4-f1[12]@1[12]$": + type: object + unevaluatedProperties: false + $ref: /schemas/input/touchscreen/touchscreen.yaml# + description: + RMI4 Function 11 and Function 12 are for 2D touch position sensing. + + properties: + reg: + maxItems: 1 + + syna,clip-x-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for X. + + syna,clip-y-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for Y. + + syna,clip-x-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for X. + + syna,clip-y-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for Y. + + syna,offset-x: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to X. + + syna,offset-y: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to Y. + + syna,delta-x-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the X axis required to generate an interrupt in + reduced reporting mode. + + syna,delta-y-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the Y axis required to generate an interrupt in + reduced reporting mode. + + syna,sensor-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + description: | + Sensor type: 1 for touchscreen 2 for touchpad. + + syna,disable-report-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Mask for disabling posiiton reporting. Used to disable reporing + absolute position data. + + syna,rezero-wait-ms: + description: + Time to wait after issuing a rezero command. + + required: + - reg + + "^rmi4-f[0-9a-f]+@[0-9a-f]+$": + type: object + description: + Other functions, not documented yet. + + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + - if: + properties: + compatible: + contains: + const: syna,rmi4-i2c + then: + properties: + spi-rx-delay-us: false + spi-tx-delay-us: false + else: + properties: + syna,reset-delay-ms: false + syna,startup-delay-ms: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + syna,startup-delay-ms = <100>; + vdd-supply = <&tsp_vdd>; + vio-supply = <&ldo32_reg>; + + pinctrl-0 = <&touch_irq>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + + rmi4-f1a@1a { + reg = <0x1a>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "syna,rmi4-spi"; + reg = <0x0>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + spi-max-frequency = <4000000>; + spi-rx-delay-us = <30>; + spi-cpha; + spi-cpol; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-y; + syna,sensor-type = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 895592da9626..431c13335c40 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -10,6 +10,13 @@ maintainers: - Dmitry Torokhov <dmitry.torokhov@gmail.com> properties: + panel: + description: If this touchscreen is integrally connected to a panel, this + is a reference to that panel. The presence of this reference indicates + that the touchscreen should be power sequenced together with the panel + and that they may share power and/or reset signals. + $ref: /schemas/types.yaml#/definitions/phandle + touchscreen-min-x: description: minimum x coordinate reported $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt index ed00f61b8c08..210486a3fb11 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt @@ -6,7 +6,7 @@ Required properties: - ti,x-plate-ohms: X-plate resistance in ohms. Optional properties: -- gpios: the interrupt gpio the chip is connected to (trough the penirq pin). +- gpios: the interrupt gpio the chip is connected to (through the penirq pin). The penirq pin goes to low when the panel is touched. (see GPIO binding[1] for more details). - interrupts: (gpio) interrupt to which the chip is connected diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml index e84e4f33b358..3d06db98e978 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -35,6 +35,7 @@ properties: - amlogic,meson-sm1-gpio-intc - amlogic,meson-a1-gpio-intc - amlogic,meson-s4-gpio-intc + - amlogic,c3-gpio-intc - const: amlogic,meson-gpio-intc reg: diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 39e64c7f6360..2bc38479a41e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -49,7 +49,7 @@ properties: The 2nd cell contains the interrupt number for the interrupt type. SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. Extented SPI interrupts are in the range [0-1023]. + range [0-15]. Extended SPI interrupts are in the range [0-1023]. Extended PPI interrupts are in the range [0-127]. The 3rd cell is the flags, encoded as follows: diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt index 2a1d16bdf834..ea939f54c5eb 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt @@ -6,7 +6,7 @@ controllers are OR:ed together and fed to the CPU tile's IRQ input. Each instance can handle up to 32 interrupts. Required properties: -- compatible: "arm,versatile-fpga-irq" or "oxsemi,ox810se-rps-irq" +- compatible: "arm,versatile-fpga-irq" - interrupt-controller: Identifies the node as an interrupt controller - #interrupt-cells: The number of cells to define the interrupts. Must be 1 as the FPGA IRQ controller has no configuration options for interrupt @@ -19,6 +19,8 @@ Required properties: the system till not make it possible for devices to request these interrupts. +The "oxsemi,ox810se-rps-irq" compatible is deprecated. + Example: pic: pic@14000000 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 0f1af5a1c12e..bdd173056f72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -70,7 +70,7 @@ Bank 1: 25: DMA9 26: DMA10 27: DMA11-14 - shared interrupt for DMA 11 to 14 -28: DMAALL - triggers on all dma interrupts (including chanel 15) +28: DMAALL - triggers on all dma interrupts (including channel 15) 29: AUX 30: ARM 31: VPUDMA diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml index c680de1cbd56..786f2426399b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml @@ -59,7 +59,7 @@ description: > .. 31 ........................ X - The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms + The BCM3380 Level 1 / Level 2 interrupt controller shows up in various forms on many BCM338x/BCM63xx chipsets. It has the following properties: - outputs a single interrupt signal to its interrupt controller parent diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml index a106ba6e810b..4847b04be1a1 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -31,6 +31,7 @@ properties: - qcom,sc7180-pdc - qcom,sc7280-pdc - qcom,sc8280xp-pdc + - qcom,sdm670-pdc - qcom,sdm845-pdc - qcom,sdx55-pdc - qcom,sdx65-pdc diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml index 65523d9459d8..3cd5a1822e14 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml# diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml index be1539d234f9..3528b81daa25 100644 --- a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml# diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml index 4ff6fabfcb30..129e32c4c774 100644 --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml @@ -41,7 +41,7 @@ properties: - description: STR register aspeed,lpc-io-reg: - $ref: '/schemas/types.yaml#/definitions/uint32-array' + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 2 description: | @@ -50,7 +50,7 @@ properties: status address may be optionally provided. aspeed,lpc-interrupts: - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | @@ -63,12 +63,12 @@ properties: kcs_chan: deprecated: true - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: The LPC channel number in the controller kcs_addr: deprecated: true - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: The host CPU IO map address required: diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml index 3f25cdb4e99b..52647bff31af 100644 --- a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml +++ b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml @@ -18,7 +18,7 @@ properties: device_type: items: - - const: "ipmi" + - const: ipmi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml index c1b4bf95ef99..4bffa3d86128 100644 --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml @@ -20,7 +20,7 @@ properties: device_type: items: - - const: "ipmi" + - const: ipmi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml index 5533b6562d92..16fc98e71233 100644 --- a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml @@ -66,7 +66,7 @@ properties: mediatek,bled-ocp-shutdown: description: | - Enable the backlight shutdown when OCP level triggerred. + Enable the backlight shutdown when OCP level triggered. type: boolean mediatek,bled-ocp-microamp: diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index 058be1fedbc8..e9d4514d0166 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -106,7 +106,7 @@ patternProperties: max-cur: $ref: /schemas/types.yaml#/definitions/uint8 - description: Maximun current at each LED channel. + description: Maximum current at each LED channel. reg: maximum: 8 @@ -129,7 +129,7 @@ patternProperties: max-cur: $ref: /schemas/types.yaml#/definitions/uint8 - description: Maximun current at each LED channel. + description: Maximum current at each LED channel. reg: description: | diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml index e6f1999cb22f..ea84ad426df1 100644 --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -56,7 +56,7 @@ properties: description: > A list of integer pairs, where each pair represent the dtest line the particular channel should be connected to and the flags denoting how the - value should be outputed, as defined in the datasheet. The number of + value should be outputted, as defined in the datasheet. The number of pairs should be the same as the number of channels. items: items: diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt index 752ae6b00d26..c80065a1eb97 100644 --- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt @@ -29,7 +29,7 @@ Required properties: where N is the value specified by 2nd cell above. If FlexRM does not get required number of completion messages in time specified by this cell then it will inject one MSI interrupt - to CPU provided atleast one completion message is available. + to CPU provided at least one completion message is available. Optional properties: -------------------- diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml index d433e496ec6e..1a2001e58880 100644 --- a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml# @@ -159,7 +159,7 @@ properties: a corresponding sysc interconnect node. This property is only needed on some legacy OMAP SoCs which have not - yet been converted to the ti,sysc interconnect hierarachy, but is + yet been converted to the ti,sysc interconnect hierarchy, but is otherwise considered obsolete. patternProperties: diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml index b8ba85a2416c..c5cab549ee8e 100644 --- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml @@ -12,7 +12,7 @@ maintainers: description: |- The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2 stream. The direction can be either parallel-in -> csi-out or csi-in -> - parallel-out The chip is programmable trough I2C and SPI but the SPI + parallel-out The chip is programmable through I2C and SPI but the SPI interface is only supported in parallel-in -> csi-out mode. Note that the current device tree bindings only support the diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt index 719b2995dc17..94b908ace53c 100644 --- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt @@ -53,7 +53,7 @@ Optional Connector Properties: ============================== - sdtv-standards: Set the possible signals to which the hardware tries to lock - instead of using the autodetection mechnism. Please look at + instead of using the autodetection mechanism. Please look at [1] for more information. [1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml index dca9b0c5e106..a500a585c692 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -36,7 +36,7 @@ description: | controls the information of each hardware independent which include clk/power/irq. There are two workqueues in parent device: lat workqueue and core workqueue. They are used - to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer, + to lat and core hardware decoder. Lat workqueue need to get input bitstream and lat buffer, then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode done. Core workqueue need to get lat buffer and output buffer, then enable core to decode, writing the result to output buffer, disable hardware when core decode done. These two diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml index 2350bf4b370e..9410f13ca97c 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -40,7 +40,7 @@ properties: properties: compatible: - const: "venus-decoder" + const: venus-decoder required: - compatible @@ -52,7 +52,7 @@ properties: properties: compatible: - const: "venus-encoder" + const: venus-encoder required: - compatible diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml index 7915dcd2d99f..f66033ae8b59 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml @@ -106,7 +106,7 @@ examples: #include <dt-bindings/clock/qcom,videocc-sm8250.h> #include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> venus: video-codec@aa00000 { compatible = "qcom,sm8250-venus"; @@ -114,7 +114,7 @@ examples: interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&videocc MVS0C_GDSC>, <&videocc MVS0_GDSC>, - <&rpmhpd SM8250_MX>; + <&rpmhpd RPMHPD_MX>; power-domain-names = "venus", "vcodec0", "mx"; clocks = <&gcc GCC_VIDEO_AXI0_CLK>, diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml index a02724221ff3..b40cec0eb651 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml @@ -39,6 +39,7 @@ properties: patternProperties: ".*@[0-9]+$": type: object + $ref: mc-peripheral-props.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml index 5acfcad12bb7..8d9dae15ade0 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml @@ -34,6 +34,8 @@ required: # The controller specific properties go here. allOf: - $ref: st,stm32-fmc2-ebi-props.yaml# + - $ref: ingenic,nemc-peripherals.yaml# - $ref: intel,ixp4xx-expansion-peripheral-props.yaml# + - $ref: ti,gpmc-child.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index aee7f6cf1300..2381660b324c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -67,7 +67,7 @@ properties: minimum: 0 maximum: 31 description: the hardware id of this larb. It's only required when this - hardward id is not consecutive from its M4U point of view. + hardware id is not consecutive from its M4U point of view. required: - compatible diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml index fb4920397d08..4e4af3cfc0fe 100644 --- a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml @@ -152,7 +152,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: When the DRAM type is DDR3, this parameter defines the phy side CA line - (incluing command line, address line and clock line) drive strength. + (including command line, address line and clock line) drive strength. default: 40 rockchip,phy_ddr3_dq_drv: @@ -305,7 +305,7 @@ properties: description: Defines the self-refresh power down idle period in which memories are placed into self-refresh power down mode if bus is idle for - srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only. + srpd_lite_idle nanoseconds. This parameter is for LPDDR4 only. rockchip,standby-idle-ns: description: diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml index 75143db51411..b74ad9a3305c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml @@ -12,7 +12,7 @@ maintainers: description: The Zynq DDR ECC controller has an optional ECC support in half-bus width - (16-bit) configuration. It is cappable of correcting single bit ECC errors + (16-bit) configuration. It is capable of correcting single bit ECC errors and detecting double bit ECC errors. properties: diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml index 750996d9a175..5dfe77aca167 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml @@ -27,7 +27,7 @@ description: as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management and bus snoop configuration. - * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom + * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom hardware management protocols for handover between the host and baseboard management controller. diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index e6a2387d8650..9e4eed34dae8 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. PM8008 PMIC maintainers: - - Guru Das Srinagesh <gurus@codeaurora.org> + - Guru Das Srinagesh <quic_gurus@quicinc.com> description: | Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml index 10f207a38178..b7b323b1a4f2 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml @@ -34,7 +34,7 @@ properties: BD9576 and BD9573 VOUT1 regulator enable state can be individually controlled by a GPIO. This is dictated by state of vout1-en pin during the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 - enable sate is controlled via this pin. Set this property if vout1-en + enable state is controlled via this pin. Set this property if vout1-en is wired to be down at PMIC start-up. type: boolean @@ -61,7 +61,7 @@ properties: rohm,hw-timeout-ms: maxItems: 2 description: - Watchog timeout in milliseconds. If single value is given it is + Watchdog timeout in milliseconds. If single value is given it is the maximum timeout. Eg. if pinging watchdog is not done within this time limit the watchdog will be triggered. If two values are given watchdog is configured in "window mode". Then first value is limit for short-ping diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml index 6c8d42f27fe8..94f9767a927d 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -313,7 +313,7 @@ properties: - const: audioclk stericsson,earpeice-cmv: - description: Earpeice voltage + description: Earpiece voltage $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 950, 1100, 1270, 1580 ] @@ -337,39 +337,39 @@ properties: with power. ab8500_ldo_aux1: - description: The voltage for the auxilary LDO regulator 1 + description: The voltage for the auxiliary LDO regulator 1 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux2: - description: The voltage for the auxilary LDO regulator 2 + description: The voltage for the auxiliary LDO regulator 2 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux3: - description: The voltage for the auxilary LDO regulator 3 + description: The voltage for the auxiliary LDO regulator 3 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux4: - description: The voltage for the auxilary LDO regulator 4 + description: The voltage for the auxiliary LDO regulator 4 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux5: - description: The voltage for the auxilary LDO regulator 5 + description: The voltage for the auxiliary LDO regulator 5 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux6: - description: The voltage for the auxilary LDO regulator 6 + description: The voltage for the auxiliary LDO regulator 6 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# @@ -378,7 +378,7 @@ properties: # There is never any AUX7 regulator which is confusing ab8500_ldo_aux8: - description: The voltage for the auxilary LDO regulator 8 + description: The voltage for the auxiliary LDO regulator 8 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml index 1d4d88f7e82d..a66d58b4d1f2 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml @@ -107,7 +107,7 @@ properties: $ref: ../regulator/regulator.yaml# db8500_vrf1: - description: RF transciever voltage regulator. + description: RF transceiver voltage regulator. type: object $ref: ../regulator/regulator.yaml# diff --git a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml index 20b5836efd90..358ac8cd4d1d 100644 --- a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml +++ b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Loongson 2K1000 PM Controller diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml index 7c0f9022202c..3e3a3705e879 100644 --- a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml +++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Loongson RS780E PCH ACPI Controller diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index 38ab0499102d..36a9dbdf3f03 100644 --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx AHB Queue Manager diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index a6c19a6cc99e..3e99801f77d2 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -160,6 +160,12 @@ properties: description: The MIO bank number in which the command and data lines are configured. + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + dependencies: '#clock-cells': [ clock-output-names ] diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml index 3ee758886558..3a8e74894ae0 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -71,8 +71,8 @@ properties: marvell,xenon-phy-type: $ref: /schemas/types.yaml#/definitions/string enum: - - "emmc 5.1 phy" - - "emmc 5.0 phy" + - emmc 5.1 phy + - emmc 5.0 phy description: | Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set: marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 86c73fd825fd..58ae298cd2fc 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -269,7 +269,7 @@ properties: post-power-on-delay-ms: description: It was invented for MMC pwrseq-simple which could be referred to - mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 46eefdd19a2c..3fffa467e4e1 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -91,16 +91,6 @@ properties: should switch dat1 pin to GPIO mode. maxItems: 1 - assigned-clocks: - description: - PLL of the source clock. - maxItems: 1 - - assigned-clock-parents: - description: - parent of source clock, used for HS400 mode to get 400Mhz source clock. - maxItems: 1 - hs400-ds-delay: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt index 5f5c2bec2b8c..66a78eae4dc9 100644 --- a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt @@ -9,7 +9,7 @@ Required properties: Optional properties: - marvell,detect-delay-ms: sets the detection delay timeout in ms. -In addition to the properties described in this docuent, the details +In addition to the properties described in this document, the details described in mmc.txt are supported. Examples: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt index 69edfd4d3922..a9fb0a91245f 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt @@ -5,11 +5,13 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the sdhci-of-at91 driver. Required properties: -- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci". +- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci" + or "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci". - clocks: Phandlers to the clocks. - clock-names: Must be "hclock", "multclk", "baseclk" for "atmel,sama5d2-sdhci". Must be "hclock", "multclk" for "microchip,sam9x60-sdhci". + Must be "hclock", "multclk" for "microchip,sam9x7-sdhci". Optional properties: - assigned-clocks: The same with "multclk". diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 6da28e630577..80141eb7fc6b 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -215,7 +215,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; @@ -232,7 +232,7 @@ examples: iommus = <&apps_smmu 0x4a0 0x0>; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd SM8250_CX>; + power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&sdhc2_opp_table>; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 57d077c0b7c1..7a0e9dcdc444 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -95,7 +95,7 @@ while in suspend. | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU | ------ ------- ----- -In suspend the fclk is off and the module is disfunctional. Even register reads +In suspend the fclk is off and the module is dysfunctional. Even register reads will fail. A small logic in the host will request fclk restore, when an external event is detected. Once the clock is restored, the host detects the event normally. Since am33xx doesn't have this line it never wakes from diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml index 00882892f47e..0ff32bd00bf6 100644 --- a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip 48l640 (and similar) serial EERAM diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 56cbb42b5aea..eba2f3026ab0 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -19,12 +19,14 @@ properties: - qcom,qca2066-bt - qcom,qca6174-bt - qcom,qca9377-bt + - qcom,wcn3988-bt - qcom,wcn3990-bt - qcom,wcn3991-bt - qcom,wcn3998-bt - qcom,qca6390-bt - qcom,wcn6750-bt - qcom,wcn6855-bt + - qcom,wcn7850-bt enable-gpios: maxItems: 1 @@ -57,6 +59,9 @@ properties: vddaon-supply: description: VDD_AON supply regulator handle + vdddig-supply: + description: VDD_DIG supply regulator handle + vddbtcxmx-supply: description: VDD_BT_CXMX supply regulator handle @@ -72,6 +77,9 @@ properties: vddrfa1p2-supply: description: VDD_RFA_1P2 supply regulator handle + vddrfa1p9-supply: + description: VDD_RFA_1P9 supply regulator handle + vddrfa2p2-supply: description: VDD_RFA_2P2 supply regulator handle @@ -111,6 +119,7 @@ allOf: compatible: contains: enum: + - qcom,wcn3988-bt - qcom,wcn3990-bt - qcom,wcn3991-bt - qcom,wcn3998-bt @@ -155,6 +164,22 @@ allOf: - vddrfa0p8-supply - vddrfa1p2-supply - vddrfa1p7-supply + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn7850-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddaon-supply + - vdddig-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p9-supply examples: - | diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml new file mode 100644 index 000000000000..aa3162c74833 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom ASP 2.0 Ethernet controller + +maintainers: + - Justin Chen <justin.chen@broadcom.com> + - Florian Fainelli <florian.fainelli@broadcom.com> + +description: Broadcom Ethernet controller first introduced with 72165 + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm74165-asp + - const: brcm,asp-v2.1 + - items: + - enum: + - brcm,bcm72165-asp + - const: brcm,asp-v2.0 + + "#address-cells": + const: 1 + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + ranges: true + + interrupts: + minItems: 1 + items: + - description: RX/TX interrupt + - description: Port 0 Wake-on-LAN + - description: Port 1 Wake-on-LAN + + clocks: + maxItems: 1 + + ethernet-ports: + type: object + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-9]+$": + type: object + + $ref: ethernet-controller.yaml# + + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + description: Port number + + brcm,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + ASP Channel Number + + The depacketizer channel that consumes packets from + the unimac/port. + + required: + - reg + - brcm,channel + + additionalProperties: false + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: brcm,unimac-mdio.yaml + + description: + ASP internal UniMAC MDIO bus + +required: + - compatible + - reg + - interrupts + - clocks + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@9c00000 { + compatible = "brcm,bcm72165-asp", "brcm,asp-v2.0"; + reg = <0x9c00000 0x1fff14>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0x0 0x9c00000 0x1fff14>; + clocks = <&scmi 14>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@c614 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xc614 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + mdio@ce14 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xce14 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + brcm,channel = <8>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + brcm,channel = <9>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index d0935d2afef8..284cddb3118e 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -1,4 +1,4 @@ -* Broadcom Starfighter 2 integrated swich +* Broadcom Starfighter 2 integrated switch See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation. diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml index 0be426ee1e44..6684810fcbf0 100644 --- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml +++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml @@ -22,6 +22,8 @@ properties: - brcm,genet-mdio-v3 - brcm,genet-mdio-v4 - brcm,genet-mdio-v5 + - brcm,asp-v2.0-mdio + - brcm,asp-v2.1-mdio - brcm,unimac-mdio reg: diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml index 9c494957a07a..e42ea28d6ab4 100644 --- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -21,6 +21,7 @@ properties: - const: allwinner,sun4i-a10-can - const: allwinner,sun4i-a10-can - const: allwinner,sun8i-r40-can + - const: allwinner,sun20i-d1-can reg: maxItems: 1 @@ -37,8 +38,9 @@ properties: if: properties: compatible: - contains: - const: allwinner,sun8i-r40-can + enum: + - allwinner,sun8i-r40-can + - allwinner,sun20i-d1-can then: required: diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 67879aab623b..f9ffb963d6b1 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -122,16 +122,15 @@ required: - compatible - reg - reg-names - - interrupts - - interrupt-names - clocks - clock-names - bosch,mram-cfg -additionalProperties: false +unevaluatedProperties: false examples: - | + // Example with interrupts #include <dt-bindings/clock/imx6sx-clock.h> can@20e8000 { compatible = "bosch,m_can"; @@ -149,4 +148,21 @@ examples: }; }; + - | + // Example with timer polling + #include <dt-bindings/clock/imx6sx-clock.h> + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/net/can/cc770.txt b/Documentation/devicetree/bindings/net/can/cc770.txt index 77027bf6460a..042200cf4419 100644 --- a/Documentation/devicetree/bindings/net/can/cc770.txt +++ b/Documentation/devicetree/bindings/net/can/cc770.txt @@ -26,7 +26,7 @@ Optional properties: will be disabled. - bosch,slew-rate : slew rate of the CLKOUT signal. If not specified, - a resonable value will be calculated. + a reasonable value will be calculated. - bosch,disconnect-rx0-input : see data sheet. diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index e3501bfa22e9..170e23f0610d 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -4,7 +4,10 @@ Texas Instruments TCAN4x5x CAN Controller This file provides device node information for the TCAN4x5x interface contains. Required properties: - - compatible: "ti,tcan4x5x" + - compatible: + "ti,tcan4552", "ti,tcan4x5x" + "ti,tcan4553", "ti,tcan4x5x" or + "ti,tcan4x5x" - reg: 0 - #address-cells: 1 - #size-cells: 0 @@ -21,8 +24,10 @@ Optional properties: - reset-gpios: Hardwired output GPIO. If not defined then software reset. - device-state-gpios: Input GPIO that indicates if the device is in - a sleep state or if the device is active. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. + a sleep state or if the device is active. Not + available with tcan4552/4553. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not + available with tcan4552/4553. Example: tcan4x5x: tcan4x5x@0 { diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml index 897d2cbda45b..64d57c343e6f 100644 --- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml @@ -46,6 +46,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: CAN Tx mailbox buffer count (CAN FD) + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/davicom,dm9000.yaml b/Documentation/devicetree/bindings/net/davicom,dm9000.yaml new file mode 100644 index 000000000000..66a7c6eec767 --- /dev/null +++ b/Documentation/devicetree/bindings/net/davicom,dm9000.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/davicom,dm9000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Davicom DM9000 Fast Ethernet Controller + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + compatible: + const: davicom,dm9000 + + reg: + items: + - description: Address registers + - description: Data registers + + interrupts: + maxItems: 1 + + davicom,no-eeprom: + type: boolean + description: Configuration EEPROM is not available + + davicom,ext-phy: + type: boolean + description: Use external PHY + + reset-gpios: + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# + - $ref: /schemas/net/ethernet-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@a8000000 { + compatible = "davicom,dm9000"; + reg = <0xa8000000 0x2>, <0xa8000002 0x2>; + interrupt-parent = <&gph1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; diff --git a/Documentation/devicetree/bindings/net/davicom-dm9000.txt b/Documentation/devicetree/bindings/net/davicom-dm9000.txt deleted file mode 100644 index 64c159e9cbf7..000000000000 --- a/Documentation/devicetree/bindings/net/davicom-dm9000.txt +++ /dev/null @@ -1,27 +0,0 @@ -Davicom DM9000 Fast Ethernet controller - -Required properties: -- compatible = "davicom,dm9000"; -- reg : physical addresses and sizes of registers, must contain 2 entries: - first entry : address register, - second entry : data register. -- interrupts : interrupt specifier specific to interrupt controller - -Optional properties: -- davicom,no-eeprom : Configuration EEPROM is not available -- davicom,ext-phy : Use external PHY -- reset-gpios : phandle of gpio that will be used to reset chip during probe -- vcc-supply : phandle of regulator that will be used to enable power to chip - -Example: - - ethernet@18000000 { - compatible = "davicom,dm9000"; - reg = <0x18000000 0x2 0x18000004 0x2>; - interrupt-parent = <&gpn>; - interrupts = <7 4>; - local-mac-address = [00 00 de ad be ef]; - davicom,no-eeprom; - reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; - vcc-supply = <ð0_power>; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml index c745407f2f68..b06c416893ff 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom Starfighter 2 integrated swich +title: Broadcom Starfighter 2 integrated switch maintainers: - Florian Fainelli <f.fainelli@gmail.com> diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 8d971813bab6..ec74a660beda 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -36,7 +36,7 @@ additionalProperties: true $defs: ethernet-ports: description: A DSA switch without any extra port properties - $ref: '#/' + $ref: '#' patternProperties: "^(ethernet-)?ports$": diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 33726134f5c9..6ec0c181b6db 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families. 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 - "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6163, 6190, 6190X, 6191, 6290, 6390, 6390X + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X - "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: 6220, 6250 diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index e51be1ac0362..03b5567be389 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -49,6 +49,9 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + interrupts: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 6b0d359367da..9f6a5ccbcefe 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -66,6 +66,7 @@ properties: - mii - gmii - sgmii + - psgmii - qsgmii - qusgmii - tbi diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index c1241c8a3b77..8fb2a6ee7e5b 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -110,7 +110,7 @@ properties: $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates that PHY will disable swap of the - TX/RX lanes. This property allows the PHY to work correcly after + TX/RX lanes. This property allows the PHY to work correctly after e.g. wrong bootstrap configuration caused by issues in PCB layout design. diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml new file mode 100644 index 000000000000..9bcbacb6640d --- /dev/null +++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTGMAC100 gigabit ethernet controller + +allOf: + - $ref: ethernet-controller.yaml# + +maintainers: + - Po-Yu Chuang <ratbert@faraday-tech.com> + +properties: + compatible: + oneOf: + - const: faraday,ftgmac100 + - items: + - enum: + - aspeed,ast2400-mac + - aspeed,ast2500-mac + - aspeed,ast2600-mac + - const: faraday,ftgmac100 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: MAC IP clock + - description: RMII RCLK gate for AST2500/2600 + + clock-names: + minItems: 1 + items: + - const: MACCLK + - const: RCLK + + phy-mode: + enum: + - rgmii + - rmii + + phy-handle: true + + use-ncsi: + description: + Use the NC-SI stack instead of an MDIO PHY. Currently assumes + rmii (100bT) but kept as a separate property in case NC-SI grows support + for a gigabit link. + type: boolean + + no-hw-checksum: + description: + Used to disable HW checksum support. Here for backward + compatibility as the driver now should have correct defaults based on + the SoC. + type: boolean + deprecated: true + + mdio: + $ref: /schemas/net/mdio.yaml# + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + ethernet@1e660000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + use-ncsi; + }; + + ethernet@1e680000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <2>; + + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt deleted file mode 100644 index 29234021f601..000000000000 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Faraday Technology FTGMAC100 gigabit ethernet controller - -Required properties: -- compatible: "faraday,ftgmac100" - - Must also contain one of these if used as part of an Aspeed AST2400 - or 2500 family SoC as they have some subtle tweaks to the - implementation: - - - "aspeed,ast2400-mac" - - "aspeed,ast2500-mac" - - "aspeed,ast2600-mac" - -- reg: Address and length of the register set for the device -- interrupts: Should contain ethernet controller interrupt - -Optional properties: -- phy-handle: See ethernet.txt file in the same directory. -- phy-mode: See ethernet.txt file in the same directory. If the property is - absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for - aspeed parts. Other (unknown) parts will accept any value. -- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes - rmii (100bT) but kept as a separate property in case NC-SI grows support - for a gigabit link. -- no-hw-checksum: Used to disable HW checksum support. Here for backward - compatibility as the driver now should have correct defaults based on - the SoC. -- clocks: In accordance with the generic clock bindings. Must describe the MAC - IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The - required MAC clock must be the first cell. -- clock-names: - - - "MACCLK": The MAC IP clock - - "RCLK": Clock gate for the RMII RCLK - -Optional subnodes: -- mdio: See mdio.txt file in the same directory. - -Example: - - mac0: ethernet@1e660000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e660000 0x180>; - interrupts = <2>; - use-ncsi; - }; - -Example with phy-handle: - - mac1: ethernet@1e680000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e680000 0x180>; - interrupts = <2>; - - phy-handle = <&phy>; - phy-mode = "rgmii"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index acb2b2ac4fe1..e74502a0afe8 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -19,10 +19,12 @@ properties: enum: - mediatek,mt2701-eth - mediatek,mt7623-eth + - mediatek,mt7621-eth - mediatek,mt7622-eth - mediatek,mt7629-eth - mediatek,mt7981-eth - mediatek,mt7986-eth + - mediatek,mt7988-eth - ralink,rt5350-eth reg: @@ -32,7 +34,7 @@ properties: clock-names: true interrupts: - minItems: 3 + minItems: 1 maxItems: 4 power-domains: @@ -60,6 +62,12 @@ properties: Phandle to the mediatek hifsys controller used to provide various clocks and reset to the system. + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + mediatek,sgmiisys: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 @@ -121,6 +129,8 @@ allOf: - const: gp1 - const: gp2 + mediatek,infracfg: false + mediatek,pctl: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -135,6 +145,32 @@ allOf: properties: compatible: contains: + enum: + - mediatek,mt7621-eth + then: + properties: + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: ethif + - const: fe + + mediatek,infracfg: false + + mediatek,wed: false + + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: const: mediatek,mt7622-eth then: properties: @@ -159,6 +195,8 @@ allOf: - const: sgmii_ck - const: eth2pll + mediatek,infracfg: false + mediatek,sgmiisys: minItems: 1 maxItems: 1 @@ -204,12 +242,6 @@ allOf: - const: sgmii_ck - const: eth2pll - mediatek,infracfg: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle to the syscon node that handles the path from GMAC to - PHY variants. - mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -250,6 +282,8 @@ allOf: - const: netsys0 - const: netsys1 + mediatek,infracfg: false + mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -286,6 +320,67 @@ allOf: - const: netsys0 - const: netsys1 + mediatek,infracfg: false + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7988-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 34 + maxItems: 34 + + clock-names: + items: + - const: crypto + - const: fe + - const: gp2 + - const: gp1 + - const: gp3 + - const: ethwarp_wocpu2 + - const: ethwarp_wocpu1 + - const: ethwarp_wocpu0 + - const: esw + - const: netsys0 + - const: netsys1 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: top_usxgmii0_sel + - const: top_usxgmii1_sel + - const: top_sgm0_sel + - const: top_sgm1_sel + - const: top_xfi_phy0_xtal_sel + - const: top_xfi_phy1_xtal_sel + - const: top_eth_gmii_sel + - const: top_eth_refck_50m_sel + - const: top_eth_sys_200m_sel + - const: top_eth_sys_sel + - const: top_eth_xgmii_sel + - const: top_eth_mii_sel + - const: top_netsys_sel + - const: top_netsys_500m_sel + - const: top_netsys_pao_2x_sel + - const: top_netsys_sync_250m_sel + - const: top_netsys_ppefb_250m_sel + - const: top_netsys_warp_sel + - const: wocpu1 + - const: wocpu0 + - const: xgp1 + - const: xgp2 + - const: xgp3 + mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -293,7 +388,7 @@ allOf: patternProperties: "^mac@[0-1]$": type: object - additionalProperties: false + unevaluatedProperties: false allOf: - $ref: ethernet-controller.yaml# description: @@ -305,14 +400,9 @@ patternProperties: reg: maxItems: 1 - phy-handle: true - - phy-mode: true - required: - reg - compatible - - phy-handle required: - compatible diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml index 5aa320c8af5a..ed9d845f6008 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -129,7 +129,7 @@ properties: type: boolean description: If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled. - Otherwise, PHY WOL is perferred. + Otherwise, PHY WOL is preferred. required: - compatible diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml index 0b97e14d947f..77c9bbf987e1 100644 --- a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml +++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml @@ -33,7 +33,7 @@ properties: - usb424,9906 # SMSC9505A USB Ethernet Device (HAL) - usb424,9907 # SMSC9500 USB Ethernet Device (Alternate ID) - usb424,9908 # SMSC9500A USB Ethernet Device (Alternate ID) - - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Devic. ID) + - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Device ID) - usb424,9e00 # SMSC9500A USB Ethernet Device - usb424,9e01 # SMSC9505A USB Ethernet Device - usb424,9e08 # SMSC LAN89530 USB Ethernet Device diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml index 157e3bbcaf6f..26688e2302ea 100644 --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml @@ -52,6 +52,40 @@ properties: for a timer. type: boolean + motorcomm,rx-clk-drv-microamp: + description: | + drive strength of rx_clk rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + + motorcomm,rx-data-drv-microamp: + description: | + drive strength of rx_data/rx_ctl rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + motorcomm,tx-clk-adj-enabled: description: | This configuration is mainly to adapt to VF2 with JH7110 SoC. diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml index 8e9a95f24c80..89663fdd3eba 100644 --- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml @@ -37,13 +37,13 @@ properties: type: boolean description: | For I2C type of connection. Specifies that the chip read event shall be - trigged on falling edge. + triggered on falling edge. i2c-int-rising: type: boolean description: | For I2C type of connection. Specifies that the chip read event shall be - trigged on rising edge. + triggered on rising edge. break-control: type: boolean diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt deleted file mode 100644 index 27db496f1ce8..000000000000 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Oxford Semiconductor OXNAS DWMAC Ethernet controller - -The device inherits all the properties of the dwmac/stmmac devices -described in the file stmmac.txt in the current directory with the -following changes. - -Required properties on all platforms: - -- compatible: For the OX820 SoC, it should be : - - "oxsemi,ox820-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - For the OX810SE SoC, it should be : - - "oxsemi,ox810se-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - -- clocks: Should contain phandles to the following clocks -- clock-names: Should contain the following: - - "stmmaceth" for the host clock - see stmmac.txt - - "gmac" for the peripheral gate clock - -- oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Example : - -etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - -}; diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 161d28919316..3acd09f0da86 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -75,6 +75,7 @@ properties: description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false vddh-regulator: type: object @@ -82,6 +83,7 @@ properties: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 176ea5f90251..70bbc4220e2a 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -80,6 +80,7 @@ properties: "output" means GMAC provides the reference clock. $ref: /schemas/types.yaml#/definitions/string enum: [input, output] + default: input rockchip,grf: description: The phandle of the syscon node for the general register file. @@ -91,12 +92,18 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle tx_delay: - description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. + description: Delay value for TXD timing. $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x7F + default: 0x30 rx_delay: - description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. + description: Delay value for RXD timing. $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x7F + default: 0x10 phy-supply: description: PHY regulator diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt index 2cff6d8a585a..b9381b761a27 100644 --- a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt +++ b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt @@ -5,10 +5,10 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain the SXGBE interrupts These interrupts are ordered by fixed and follows variable - trasmit DMA interrupts, receive DMA interrupts and lpi interrupt. + transmit DMA interrupts, receive DMA interrupts and lpi interrupt. index 0 - this is fixed common interrupt of SXGBE and it is always available. - index 1 to 25 - 8 variable trasmit interrupts, variable 16 receive interrupts + index 1 to 25 - 8 variable transmit interrupts, variable 16 receive interrupts and 1 optional lpi interrupt. - phy-mode: String, operation mode of the PHY interface. Supported values are: "sgmii", "xgmii". diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt index ad3c6e109ce1..bb0224a3e826 100644 --- a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt +++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt @@ -110,7 +110,7 @@ Optional properties: It depends on the SoC configuration. - snps,read-requests: Number of read requests that the AXI port can issue. It depends on the SoC configuration. -- snps,burst-map: Bitmap of allowed AXI burst lengts, with the LSB +- snps,burst-map: Bitmap of allowed AXI burst lengths, with the LSB representing 4, then 8 etc. - snps,txpbl: DMA Programmable burst length for the TX DMA - snps,rxpbl: DMA Programmable burst length for the RX DMA diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index 42cd075456ab..e16287c06e5e 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -21,7 +21,7 @@ Optional properties: MAC can generate it. - st,tx-retime-src: This specifies which clk is wired up to the mac for retimeing tx lines. This is totally board dependent and can take one of the - posssible values from "txclk", "clk_125" or "clkgen". + possible values from "txclk", "clk_125" or "clkgen". If not passed, the internal clock will be used by default. - sti-ethclk: this is the phy clock. - sti-clkconf: this is an extra sysconfig register, available in new SoCs, diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml new file mode 100644 index 000000000000..f5c22d6dcaee --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icss-iep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSS Industrial Ethernet Peripheral (IEP) module + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am642-icss-iep + - ti,j721e-icss-iep + - const: ti,am654-icss-iep + + - const: ti,am654-icss-iep + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the IEP source clock + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + /* AM65x */ + icssg0_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml new file mode 100644 index 000000000000..311c570165f9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSSG PRUSS Ethernet + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +description: + Ethernet based on the Programmable Real-Time Unit and Industrial + Communication Subsystem. + +allOf: + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# + +properties: + compatible: + enum: + - ti,am654-icssg-prueth # for AM65x SoC family + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MSMC SRAM node + + dmas: + maxItems: 10 + + dma-names: + items: + - const: tx0-0 + - const: tx0-1 + - const: tx0-2 + - const: tx0-3 + - const: tx1-0 + - const: tx1-1 + - const: tx1-2 + - const: tx1-3 + - const: rx0 + - const: rx1 + + ti,mii-g-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_G_RT module's syscon regmap. + + ti,mii-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_RT module's syscon regmap + + ti,iep: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + items: + maxItems: 1 + description: + phandle to IEP (Industrial Ethernet Peripheral) for ICSSG + + interrupts: + maxItems: 2 + description: + Interrupt specifiers to TX timestamp IRQ. + + interrupt-names: + items: + - const: tx_ts0 + - const: tx_ts1 + + ethernet-ports: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + ^port@[0-1]$: + type: object + description: ICSSG PRUETH external ports + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + items: + - enum: [0, 1] + description: ICSSG PRUETH port number + + interrupts: + maxItems: 1 + + ti,syscon-rgmii-delay: + items: + - items: + - description: phandle to system controller node + - description: The offset to ICSSG control register + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to system controller node and register offset + to ICSSG control register for RGMII transmit delay + + required: + - reg + anyOf: + - required: + - port@0 + - required: + - port@1 + +required: + - compatible + - sram + - dmas + - dma-names + - ethernet-ports + - ti,mii-g-rt + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + /* Example k3-am654 base board SR2.0, dual-emac */ + pruss2_eth: ethernet { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg2_rgmii_pins_default>; + sram = <&msmc_ram>; + + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>, + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>; + firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf", + "ti-pruss/am65x-rtu0-prueth-fw.elf", + "ti-pruss/am65x-txpru0-prueth-fw.elf", + "ti-pruss/am65x-pru1-prueth-fw.elf", + "ti-pruss/am65x-rtu1-prueth-fw.elf", + "ti-pruss/am65x-txpru1-prueth-fw.elf"; + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + dmas = <&main_udmap 0xc300>, /* egress slice 0 */ + <&main_udmap 0xc301>, /* egress slice 0 */ + <&main_udmap 0xc302>, /* egress slice 0 */ + <&main_udmap 0xc303>, /* egress slice 0 */ + <&main_udmap 0xc304>, /* egress slice 1 */ + <&main_udmap 0xc305>, /* egress slice 1 */ + <&main_udmap 0xc306>, /* egress slice 1 */ + <&main_udmap 0xc307>, /* egress slice 1 */ + <&main_udmap 0x4300>, /* ingress slice 0 */ + <&main_udmap 0x4301>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + ti,mii-g-rt = <&icssg2_mii_g_rt>; + ti,iep = <&icssg2_iep0>, <&icssg2_iep1>; + interrupt-parent = <&icssg2_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + pruss2_emac0: port@0 { + reg = <0>; + phy-handle = <&pruss2_eth0_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 24>; + ti,syscon-rgmii-delay = <&scm_conf 0x4120>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + pruss2_emac1: port@1 { + reg = <1>; + phy-handle = <&pruss2_eth1_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 25>; + ti,syscon-rgmii-delay = <&scm_conf 0x4124>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 67b63f119f64..252207adbc54 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -28,6 +28,7 @@ properties: - mediatek,mt76 - mediatek,mt7628-wmac - mediatek,mt7622-wmac + - mediatek,mt7981-wmac - mediatek,mt7986-wmac reg: @@ -71,6 +72,14 @@ properties: ieee80211-freq-limit: true + nvmem-cells: + items: + - description: NVMEM cell with EEPROM + + nvmem-cell-names: + items: + - const: eeprom + mediatek,eeprom-data: $ref: /schemas/types.yaml#/definitions/uint32-array description: @@ -84,6 +93,7 @@ properties: - description: offset containing EEPROM data description: Phandle to a MTD partition + offset containing EEPROM data + deprecated: true big-endian: $ref: /schemas/types.yaml#/definitions/flag @@ -258,7 +268,8 @@ examples: interrupt-parent = <&cpuintc>; interrupts = <6>; - mediatek,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&eeprom>; + nvmem-cell-names = "eeprom"; }; - | diff --git a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt b/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt deleted file mode 100644 index 038dda48b8e6..000000000000 --- a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt +++ /dev/null @@ -1,35 +0,0 @@ -XILINX GMIITORGMII Converter Driver Device Tree Bindings --------------------------------------------------------- - -The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media -Independent Interface (RGMII) core provides the RGMII between RGMII-compliant -Ethernet physical media devices (PHY) and the Gigabit Ethernet controller. -This core can be used in all three modes of operation(10/100/1000 Mb/s). -The Management Data Input/Output (MDIO) interface is used to configure the -Speed of operation. This core can switch dynamically between the three -Different speed modes by configuring the conveter register through mdio write. - -This converter sits between the ethernet MAC and the external phy. -MAC <==> GMII2RGMII <==> RGMII_PHY - -For more details about mdio please refer phy.txt file in the same directory. - -Required properties: -- compatible : Should be "xlnx,gmii-to-rgmii-1.0" -- reg : The ID number for the phy, usually a small integer -- phy-handle : Should point to the external phy device. - See ethernet.txt file in the same directory. - -Example: - mdio { - #address-cells = <1>; - #size-cells = <0>; - phy: ethernet-phy@0 { - ...... - }; - gmiitorgmii: gmiitorgmii@8 { - compatible = "xlnx,gmii-to-rgmii-1.0"; - reg = <8>; - phy-handle = <&phy>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml new file mode 100644 index 000000000000..0f781dac6717 --- /dev/null +++ b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,gmii-to-rgmii.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx GMII to RGMII Converter + +maintainers: + - Harini Katakam <harini.katakam@amd.com> + +description: + The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media + Independent Interface (RGMII) core provides the RGMII between RGMII-compliant + ethernet physical media devices (PHY) and the Gigabit Ethernet controller. + This core can be used in all three modes of operation(10/100/1000 Mb/s). + The Management Data Input/Output (MDIO) interface is used to configure the + speed of operation. This core can switch dynamically between the three + different speed modes by configuring the converter register through mdio write. + The core cannot function without an external phy connected to it. + +properties: + compatible: + const: xlnx,gmii-to-rgmii-1.0 + + reg: + minimum: 0 + maximum: 31 + description: The ID number for the phy. + + phy-handle: + $ref: ethernet-controller.yaml#/properties/phy-handle + +required: + - compatible + - reg + - phy-handle + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@0 { + reg = <0>; + }; + gmiitorgmii@8 { + compatible = "xlnx,gmii-to-rgmii-1.0"; + reg = <8>; + phy-handle = <&phy>; + }; + }; diff --git a/Documentation/devicetree/bindings/nios2/nios2.txt b/Documentation/devicetree/bindings/nios2/nios2.txt index b95e831bcba3..3e9cabe667b3 100644 --- a/Documentation/devicetree/bindings/nios2/nios2.txt +++ b/Documentation/devicetree/bindings/nios2/nios2.txt @@ -23,7 +23,7 @@ Required properties: - altr,tlb-num-ways: Specifies the number of set-associativity ways in the TLB. - altr,tlb-num-entries: Specifies the number of entries in the TLB. - altr,tlb-ptr-sz: Specifies size of TLB pointer. -- altr,has-mul: Specifies CPU hardware multipy support, should be 1. +- altr,has-mul: Specifies CPU hardware multiply support, should be 1. - altr,has-mmu: Specifies CPU support MMU support, should be 1. - altr,has-initda: Specifies CPU support initda instruction, should be 1. - altr,reset-addr: Specifies CPU reset address diff --git a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml index 714a6538cc7c..ee8ac322332d 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml @@ -14,7 +14,7 @@ description: infrastructure shall provide a non-volatile memory with a table whose the content is well specified and gives many information about the manufacturer (name, country of manufacture, etc) as well as device caracteristics (serial - number, hardware version, mac addresses, etc). The underlaying device type + number, hardware version, mac addresses, etc). The underlying device type (flash, EEPROM,...) is not specified. The exact location of each value is also dynamic and should be discovered at run time because it depends on the parameters the manufacturer decided to embed. diff --git a/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml new file mode 100644 index 000000000000..02d1d2c17129 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/operating-points-v2-ti-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI CPU OPP (Operating Performance Points) + +description: + TI SoCs, like those in the AM335x, AM437x, AM57xx, AM62x, and DRA7xx + families, the CPU frequencies subset and the voltage value of each + OPP vary based on the silicon variant used. The data sheet sections + corresponding to "Operating Performance Points" describe the frequency + and voltage values based on device type and speed bin information + blown in corresponding eFuse bits as referred to by the Technical + Reference Manual. + + This document extends the operating-points-v2 binding by providing + the hardware description for the scheme mentioned above. + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2-ti-cpu + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + points to syscon node representing the control module + register space of the SoC. + + opp-shared: true + +patternProperties: + '^opp(-?[0-9]+)*$': + type: object + additionalProperties: false + + properties: + clock-latency-ns: true + opp-hz: true + opp-microvolt: true + opp-supported-hw: true + opp-suspend: true + turbo-mode: true + + required: + - opp-hz + - opp-supported-hw + +required: + - compatible + - syscon + +additionalProperties: false + +examples: + - | + opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index 47e6f36b7637..e2f8f7af3cf4 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -56,7 +56,7 @@ patternProperties: need to be configured and that is left for the implementation specific binding. minItems: 1 - maxItems: 16 + maxItems: 32 items: maxItems: 1 diff --git a/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml new file mode 100644 index 000000000000..693f22539606 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OMAP compatible OPP supply + +description: + OMAP5, DRA7, and AM57 families of SoCs have Class 0 AVS eFuse + registers, which contain OPP-specific voltage information tailored + for the specific device. This binding provides the information + needed to describe such a hardware values and relate them to program + the primary regulator during an OPP transition. + + Also, some supplies may have an associated vbb-supply, an Adaptive + Body Bias regulator, which must transition in a specific sequence + w.r.t the vdd-supply and clk when making an OPP transition. By + supplying two regulators to the device that will undergo OPP + transitions, we can use the multi-regulator support implemented by + the OPP core to describe both regulators the platform needs. The + OPP core binding Documentation/devicetree/bindings/opp/opp-v2.yaml + provides further information (refer to Example 4 Handling multiple + regulators). + +maintainers: + - Nishanth Menon <nm@ti.com> + +properties: + $nodename: + pattern: '^opp-supply(@[0-9a-f]+)?$' + + compatible: + oneOf: + - description: Basic OPP supply controlling VDD and VBB + const: ti,omap-opp-supply + - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with + VBB. + const: ti,omap5-opp-supply + - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB + const: ti,omap5-core-opp-supply + + reg: + maxItems: 1 + + ti,absolute-max-voltage-uv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Absolute maximum voltage for the OPP supply in micro-volts. + minimum: 750000 + maximum: 1500000 + + ti,efuse-settings: + description: An array of u32 tuple items providing information about + optimized efuse configuration. + minItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Reference voltage in micro-volts (OPP Voltage) + minimum: 750000 + maximum: 1500000 + multipleOf: 10000 + - description: efuse offset where the optimized voltage is located + multipleOf: 4 + maximum: 256 + +required: + - compatible + - ti,absolute-max-voltage-uv + +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,omap-opp-supply + then: + required: + - reg + - ti,efuse-settings + +additionalProperties: false + +examples: + - | + opp-supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; + }; + - | + opp-supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = + /* uV offset */ + <1060000 0x0>, + <1160000 0x4>, + <1210000 0x8>; + ti,absolute-max-voltage-uv = <1500000>; + }; diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt deleted file mode 100644 index b70d326117cd..000000000000 --- a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt +++ /dev/null @@ -1,63 +0,0 @@ -Texas Instruments OMAP compatible OPP supply description - -OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which -contain data that can be used to adjust voltages programmed for some of their -supplies for more efficient operation. This binding provides the information -needed to read these values and use them to program the main regulator during -an OPP transitions. - -Also, some supplies may have an associated vbb-supply which is an Adaptive Body -Bias regulator which much be transitioned in a specific sequence with regards -to the vdd-supply and clk when making an OPP transition. By supplying two -regulators to the device that will undergo OPP transitions we can make use -of the multi regulator binding that is part of the OPP core described here [1] -to describe both regulators needed by the platform. - -[1] Documentation/devicetree/bindings/opp/opp-v2.yaml - -Required Properties for Device Node: -- vdd-supply: phandle to regulator controlling VDD supply -- vbb-supply: phandle to regulator controlling Body Bias supply - (Usually Adaptive Body Bias regulator) - -Required Properties for opp-supply node: -- compatible: Should be one of: - "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB - "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD - along with VBB - "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD - but no VBB. -- reg: Address and length of the efuse register set for the device (mandatory - only for "ti,omap5-opp-supply") -- ti,efuse-settings: An array of u32 tuple items providing information about - optimized efuse configuration. Each item consists of the following: - volt: voltage in uV - reference voltage (OPP voltage) - efuse_offseet: efuse offset from reg where the optimized voltage is stored. -- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. - -Example: - -/* Device Node (CPU) */ -cpus { - cpu0: cpu@0 { - device_type = "cpu"; - - ... - - vdd-supply = <&vcc>; - vbb-supply = <&abb_mpu>; - }; -}; - -/* OMAP OPP Supply with Class0 registers */ -opp_supply_mpu: opp_supply@4a003b20 { - compatible = "ti,omap5-opp-supply"; - reg = <0x4a003b20 0x8>; - ti,efuse-settings = < - /* uV offset */ - 1060000 0x0 - 1160000 0x4 - 1210000 0x8 - >; - ti,absolute-max-voltage-uv = <1500000>; -}; diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index a4f61ced5e88..1ae8dcfa072c 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -60,6 +60,61 @@ properties: - const: aux - const: pipe + interrupts: + items: + - description: + Combined system interrupt, which is used to signal the following + interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme, + hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi, + edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app + - description: + Combined PM interrupt, which is used to signal the following + interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2, + linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2, + linkst_out_l0s, pm_dstate_update + - description: + Combined message interrupt, which is used to signal the following + interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi, + pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active + - description: + Combined legacy interrupt, which is used to signal the following + interrupts - inta, intb, intc, intd + - description: + Combined error interrupt, which is used to signal the following + interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout, + tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx, + nf_err_rx, f_err_rx, radm_qoverflow + + interrupt-names: + items: + - const: sys + - const: pmc + - const: msg + - const: legacy + - const: err + + legacy-interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + additionalProperties: false + properties: + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + interrupts: + items: + - description: combined legacy interrupt + required: + - "#address-cells" + - "#interrupt-cells" + - interrupt-controller + - interrupts + msi-map: true num-lanes: true @@ -108,6 +163,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/interrupt-controller/arm-gic.h> bus { #address-cells = <2>; @@ -127,6 +183,12 @@ examples: "aclk_dbi", "pclk", "aux"; device_type = "pci"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; linux,pci-domain = <2>; max-link-speed = <2>; msi-map = <0x2000 &its 0x2000 0x1000>; @@ -140,6 +202,14 @@ examples: reset-names = "pipe"; #address-cells = <3>; #size-cells = <2>; + + legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 1a83f0f65f19..8bbdeb8821f8 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -25,6 +25,15 @@ select: allOf: - $ref: /schemas/pci/pci-bus.yaml# - $ref: /schemas/pci/snps,dw-pcie-common.yaml# + - if: + not: + required: + - msi-map + then: + properties: + interrupt-names: + contains: + const: msi properties: reg: @@ -188,14 +197,15 @@ properties: Link Control register). const: bw_mg - description: + Combined Legacy A/B/C/D interrupt signal. See "^int(a|b|c|d)$" for + details. + const: legacy + - description: Vendor-specific IRQ names. Consider using the generic names above for new bindings. oneOf: - description: See native "app" IRQ for details - enum: [ intr ] - allOf: - - contains: - const: msi + enum: [ intr, sys, pmc, msg, err ] additionalProperties: true diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml index b35c4d256e40..99eac888ae03 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml# diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml index d16bd6e47f90..e9237c58ce45 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml# diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt index 0d70c8341095..104953e849e7 100644 --- a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt +++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt @@ -14,7 +14,7 @@ Required properties: - #size-cells: Must be 0. The INNO USB2 PHY device should be a child node of peripheral controller that -contains the PHY configuration register, and each device suppports up to 2 PHY +contains the PHY configuration register, and each device supports up to 2 PHY ports which are represented as child nodes of INNO USB2 PHY device. Required properties for PHY port node: diff --git a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt index afbc7e24a3de..c7970c07ee32 100644 --- a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt @@ -8,7 +8,7 @@ Required properties: - clocks: Must contain an entry for each entry in clock-names. See ../clock/clock-bindings.txt for details. - clock-names: Must include "usb_phy". - - img,cr-top: Must constain a phandle to the CR_TOP syscon node. + - img,cr-top: Must contain a phandle to the CR_TOP syscon node. - img,refclk: Indicates the reference clock source for the USB PHY. See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values. diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt index 660a13ca90b3..da94426aa694 100644 --- a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt @@ -4,7 +4,7 @@ Required properties: - compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" - reg: base address and length of the registers - clocks - A single clock. From common clock binding. -- #phys-cells: should be 0. From commmon phy binding. +- #phys-cells: should be 0. From common phy binding. - resets: reference to the reset controller Example: diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml index 0e6505e9da50..5ac994b3c0aa 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml @@ -10,7 +10,7 @@ maintainers: - Heiko Stuebner <heiko@sntech.de> description: | - The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP wich + The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP which connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras. properties: diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 9ea30eaba314..3f16ff14484d 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -59,7 +59,7 @@ properties: description: GPIO to signal Type-C cable orientation for lane swap. If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to - achieve the funtionality of an external type-C plug flip mux. + achieve the functionality of an external type-C plug flip mux. typec-dir-debounce-ms: minimum: 100 diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 60c9d0ac75e6..7c7936b89f2c 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -62,7 +62,7 @@ Deprecated properties: - ctrl-module : phandle of the control module used by PHY driver to power on the PHY. -Recommended properies: +Recommended properties: - syscon-phy-power : phandle/offset pair. Phandle to the system control module and the register offset to power on/off the PHY. diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 467016cbb037..450240570314 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -97,7 +97,7 @@ patternProperties: # It's pretty scary, but the basic idea is that: # - One node name can start with either s- or r- for PRCM nodes, # - Then, the name itself can be any repetition of <string>- (to - # accomodate with nodes like uart4-rts-cts-pins), where each + # accommodate with nodes like uart4-rts-cts-pins), where each # string can be either starting with 'p' but in a string longer # than 3, or something that doesn't start with 'p', # - Then, the bank name is optional and will be between pa and pg, diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml index 99080c9eaac3..4e7a456ea4cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml @@ -15,6 +15,7 @@ allOf: properties: compatible: enum: + - amlogic,c3-periphs-pinctrl - amlogic,meson-a1-periphs-pinctrl - amlogic,meson-s4-periphs-pinctrl @@ -36,6 +37,10 @@ patternProperties: - const: mux - const: gpio + gpio-line-names: + minItems: 62 # A1 + maxItems: 82 # S4 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml index a7b29ef0bab6..e707c222a07f 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml @@ -41,6 +41,13 @@ $defs: gpio-ranges: maxItems: 1 + patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml index 7c9c94ec5b7b..0942ea60c6cd 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml @@ -36,6 +36,9 @@ patternProperties: - const: ds - const: gpio + gpio-line-names: + maxItems: 15 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml index 4bcb8b60420f..e3c8bde30559 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml @@ -38,6 +38,9 @@ patternProperties: - const: mux - const: ds + gpio-line-names: + maxItems: 85 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml index 32d99c9b6afc..c1b03147e8ec 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml @@ -44,6 +44,10 @@ patternProperties: - const: pull - const: gpio + gpio-line-names: + minItems: 11 # GXL + maxItems: 16 # Meson8 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml index d0441051f34a..4ec85b8248fa 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml @@ -45,6 +45,10 @@ patternProperties: - const: pull-enable - const: gpio + gpio-line-names: + minItems: 86 # AXG + maxItems: 120 # Meson8 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index bef85c25cdef..37c0a74c7c01 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -25,30 +25,32 @@ properties: reg: maxItems: 2 -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: /schemas/types.yaml#/definitions/string - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] allOf: - $ref: pinctrl.yaml# @@ -56,8 +58,6 @@ allOf: required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 14c391f16899..863da5d80826 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -37,32 +37,34 @@ properties: 0: compatible with "aspeed,ast2500-gfx", "syscon" 1: compatible with "aspeed,ast2500-lhc", "syscon" -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: /schemas/types.yaml#/definitions/string - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] allOf: - $ref: pinctrl.yaml# @@ -71,8 +73,6 @@ required: - compatible - aspeed,external-nodes -additionalProperties: false - examples: - | #include <dt-bindings/clock/aspeed-clock.h> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 859a1889dc1e..612464aef98b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -23,65 +23,65 @@ properties: compatible: const: aspeed,ast2600-pinctrl -patternProperties: - '^.*$': - if: - type: object - then: - properties: - function: - $ref: /schemas/types.yaml#/definitions/string - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] - - groups: - $ref: /schemas/types.yaml#/definitions/string - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, - SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] + + groups: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, + SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] + + pins: true + bias-disable: true allOf: - $ref: pinctrl.yaml# @@ -89,8 +89,6 @@ allOf: required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt deleted file mode 100644 index e047a198db38..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt +++ /dev/null @@ -1,461 +0,0 @@ -Broadcom BCM281xx Pin Controller - -This is a pin controller for the Broadcom BCM281xx SoC family, which includes -BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. - -=== Pin Controller Node === - -Required Properties: - -- compatible: Must be "brcm,bcm11351-pinctrl" -- reg: Base address of the PAD Controller register block and the size - of the block. - -For example, the following is the bare minimum node: - - pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - }; - -As a pin controller device, in addition to the required properties, this node -should also contain the pin configuration nodes that client devices reference, -if any. - -=== Pin Configuration Node === - -Each pin configuration node is a sub-node of the pin controller node and is a -container of an arbitrary number of subnodes, called pin group nodes in this -document. - -Please refer to the pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the definition of a -"pin configuration node". - -=== Pin Group Node === - -A pin group node specifies the desired pin mux and/or pin configuration for an -arbitrary number of pins. The name of the pin group node is optional and not -used. - -A pin group node only affects the properties specified in the node, and has no -effect on any properties that are omitted. - -The pin group node accepts a subset of the generic pin config properties. For -details generic pin config properties, please refer to pinctrl-bindings.txt -and <include/linux/pinctrl/pinconfig-generic.h>. - -Each pin controlled by this pin controller belong to one of three types: -Standard, I2C, and HDMI. Each type accepts a different set of pin config -properties. A list of pins and their types is provided below. - -Required Properties (applicable to all pins): - -- pins: Multiple strings. Specifies the name(s) of one or more pins to - be configured by this node. - -Optional Properties (for standard pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- input-schmitt-enable: No arguments. Enable schmitt-trigger mode. -- input-schmitt-disable: No arguments. Disable schmitt-trigger mode. -- bias-pull-up: No arguments. Pull up on pin. -- bias-pull-down: No arguments. Pull down on pin. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) -- drive-strength: Integer. Drive strength in mA. Valid values are - 2, 4, 6, 8, 10, 12, 14, 16 mA. - -Optional Properties (for I2C pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- bias-pull-up: Integer. Pull up strength in Ohm. There are 3 - pull-up resistors (1.2k, 1.8k, 2.7k) available - in parallel for I2C pins, so the valid values - are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Optional Properties (for HDMI pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- slew-rate: Integer. Controls slew rate. - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Example: -// pin controller node -pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - - // pin configuration node - dev_a_default: dev_a_active { - //group node defining 1 standard pin - grp_1 { - pins = "std_pin1"; - function = "alt1"; - input-schmitt-enable; - bias-disable; - slew-rate = <1>; - drive-strength = <4>; - }; - - // group node defining 2 I2C pins - grp_2 { - pins = "i2c_pin1", "i2c_pin2"; - function = "alt2"; - bias-pull-up = <720>; - input-enable; - }; - - // group node defining 2 HDMI pins - grp_3 { - pins = "hdmi_pin1", "hdmi_pin2"; - function = "alt3"; - slew-rate = <1>; - }; - - // other pin group nodes - ... - }; - - // other pin configuration nodes - ... -}; - -In the example above, "dev_a_active" is a pin configuration node with a number -of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in -the "pins" property. Thus, the remaining properties in the "grp_1" node applies -only to this pin, including the following settings: - - setting pinmux to "alt1" - - enabling schmitt-trigger (hystersis) mode - - disabling pin bias - - setting the slew-rate to 1 - - setting the drive strength to 4 mA -Note that neither "input-enable" nor "input-disable" was specified - the pinctrl -subsystem will therefore leave this property unchanged from whatever state it -was in before applying these changes. - -The "pins" property in the pin group node "grp_2" specifies two pins - -"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node, -therefore, applies to both of these pins. The properties include: - - setting pinmux to "alt2" - - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors - in parallel) - - enabling both pins' input -"slew-rate" is not specified in this pin group node, so the slew-rate for these -pins are left as-is. - -Finally, "grp_3" defines two HDMI pins. The following properties are applied to -both pins: - - setting pinmux to "alt3" - - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps - Highspeed mode -The input is neither enabled or disabled, and is left untouched. - -=== Pin Names and Type === - -The following are valid pin names and their pin types: - - "adcsync", Standard - "bat_rm", Standard - "bsc1_scl", I2C - "bsc1_sda", I2C - "bsc2_scl", I2C - "bsc2_sda", I2C - "classgpwr", Standard - "clk_cx8", Standard - "clkout_0", Standard - "clkout_1", Standard - "clkout_2", Standard - "clkout_3", Standard - "clkreq_in_0", Standard - "clkreq_in_1", Standard - "cws_sys_req1", Standard - "cws_sys_req2", Standard - "cws_sys_req3", Standard - "digmic1_clk", Standard - "digmic1_dq", Standard - "digmic2_clk", Standard - "digmic2_dq", Standard - "gpen13", Standard - "gpen14", Standard - "gpen15", Standard - "gpio00", Standard - "gpio01", Standard - "gpio02", Standard - "gpio03", Standard - "gpio04", Standard - "gpio05", Standard - "gpio06", Standard - "gpio07", Standard - "gpio08", Standard - "gpio09", Standard - "gpio10", Standard - "gpio11", Standard - "gpio12", Standard - "gpio13", Standard - "gpio14", Standard - "gps_pablank", Standard - "gps_tmark", Standard - "hdmi_scl", HDMI - "hdmi_sda", HDMI - "ic_dm", Standard - "ic_dp", Standard - "kp_col_ip_0", Standard - "kp_col_ip_1", Standard - "kp_col_ip_2", Standard - "kp_col_ip_3", Standard - "kp_row_op_0", Standard - "kp_row_op_1", Standard - "kp_row_op_2", Standard - "kp_row_op_3", Standard - "lcd_b_0", Standard - "lcd_b_1", Standard - "lcd_b_2", Standard - "lcd_b_3", Standard - "lcd_b_4", Standard - "lcd_b_5", Standard - "lcd_b_6", Standard - "lcd_b_7", Standard - "lcd_g_0", Standard - "lcd_g_1", Standard - "lcd_g_2", Standard - "lcd_g_3", Standard - "lcd_g_4", Standard - "lcd_g_5", Standard - "lcd_g_6", Standard - "lcd_g_7", Standard - "lcd_hsync", Standard - "lcd_oe", Standard - "lcd_pclk", Standard - "lcd_r_0", Standard - "lcd_r_1", Standard - "lcd_r_2", Standard - "lcd_r_3", Standard - "lcd_r_4", Standard - "lcd_r_5", Standard - "lcd_r_6", Standard - "lcd_r_7", Standard - "lcd_vsync", Standard - "mdmgpio0", Standard - "mdmgpio1", Standard - "mdmgpio2", Standard - "mdmgpio3", Standard - "mdmgpio4", Standard - "mdmgpio5", Standard - "mdmgpio6", Standard - "mdmgpio7", Standard - "mdmgpio8", Standard - "mphi_data_0", Standard - "mphi_data_1", Standard - "mphi_data_2", Standard - "mphi_data_3", Standard - "mphi_data_4", Standard - "mphi_data_5", Standard - "mphi_data_6", Standard - "mphi_data_7", Standard - "mphi_data_8", Standard - "mphi_data_9", Standard - "mphi_data_10", Standard - "mphi_data_11", Standard - "mphi_data_12", Standard - "mphi_data_13", Standard - "mphi_data_14", Standard - "mphi_data_15", Standard - "mphi_ha0", Standard - "mphi_hat0", Standard - "mphi_hat1", Standard - "mphi_hce0_n", Standard - "mphi_hce1_n", Standard - "mphi_hrd_n", Standard - "mphi_hwr_n", Standard - "mphi_run0", Standard - "mphi_run1", Standard - "mtx_scan_clk", Standard - "mtx_scan_data", Standard - "nand_ad_0", Standard - "nand_ad_1", Standard - "nand_ad_2", Standard - "nand_ad_3", Standard - "nand_ad_4", Standard - "nand_ad_5", Standard - "nand_ad_6", Standard - "nand_ad_7", Standard - "nand_ale", Standard - "nand_cen_0", Standard - "nand_cen_1", Standard - "nand_cle", Standard - "nand_oen", Standard - "nand_rdy_0", Standard - "nand_rdy_1", Standard - "nand_wen", Standard - "nand_wp", Standard - "pc1", Standard - "pc2", Standard - "pmu_int", Standard - "pmu_scl", I2C - "pmu_sda", I2C - "rfst2g_mtsloten3g", Standard - "rgmii_0_rx_ctl", Standard - "rgmii_0_rxc", Standard - "rgmii_0_rxd_0", Standard - "rgmii_0_rxd_1", Standard - "rgmii_0_rxd_2", Standard - "rgmii_0_rxd_3", Standard - "rgmii_0_tx_ctl", Standard - "rgmii_0_txc", Standard - "rgmii_0_txd_0", Standard - "rgmii_0_txd_1", Standard - "rgmii_0_txd_2", Standard - "rgmii_0_txd_3", Standard - "rgmii_1_rx_ctl", Standard - "rgmii_1_rxc", Standard - "rgmii_1_rxd_0", Standard - "rgmii_1_rxd_1", Standard - "rgmii_1_rxd_2", Standard - "rgmii_1_rxd_3", Standard - "rgmii_1_tx_ctl", Standard - "rgmii_1_txc", Standard - "rgmii_1_txd_0", Standard - "rgmii_1_txd_1", Standard - "rgmii_1_txd_2", Standard - "rgmii_1_txd_3", Standard - "rgmii_gpio_0", Standard - "rgmii_gpio_1", Standard - "rgmii_gpio_2", Standard - "rgmii_gpio_3", Standard - "rtxdata2g_txdata3g1", Standard - "rtxen2g_txdata3g2", Standard - "rxdata3g0", Standard - "rxdata3g1", Standard - "rxdata3g2", Standard - "sdio1_clk", Standard - "sdio1_cmd", Standard - "sdio1_data_0", Standard - "sdio1_data_1", Standard - "sdio1_data_2", Standard - "sdio1_data_3", Standard - "sdio4_clk", Standard - "sdio4_cmd", Standard - "sdio4_data_0", Standard - "sdio4_data_1", Standard - "sdio4_data_2", Standard - "sdio4_data_3", Standard - "sim_clk", Standard - "sim_data", Standard - "sim_det", Standard - "sim_resetn", Standard - "sim2_clk", Standard - "sim2_data", Standard - "sim2_det", Standard - "sim2_resetn", Standard - "sri_c", Standard - "sri_d", Standard - "sri_e", Standard - "ssp_extclk", Standard - "ssp0_clk", Standard - "ssp0_fs", Standard - "ssp0_rxd", Standard - "ssp0_txd", Standard - "ssp2_clk", Standard - "ssp2_fs_0", Standard - "ssp2_fs_1", Standard - "ssp2_fs_2", Standard - "ssp2_fs_3", Standard - "ssp2_rxd_0", Standard - "ssp2_rxd_1", Standard - "ssp2_txd_0", Standard - "ssp2_txd_1", Standard - "ssp3_clk", Standard - "ssp3_fs", Standard - "ssp3_rxd", Standard - "ssp3_txd", Standard - "ssp4_clk", Standard - "ssp4_fs", Standard - "ssp4_rxd", Standard - "ssp4_txd", Standard - "ssp5_clk", Standard - "ssp5_fs", Standard - "ssp5_rxd", Standard - "ssp5_txd", Standard - "ssp6_clk", Standard - "ssp6_fs", Standard - "ssp6_rxd", Standard - "ssp6_txd", Standard - "stat_1", Standard - "stat_2", Standard - "sysclken", Standard - "traceclk", Standard - "tracedt00", Standard - "tracedt01", Standard - "tracedt02", Standard - "tracedt03", Standard - "tracedt04", Standard - "tracedt05", Standard - "tracedt06", Standard - "tracedt07", Standard - "tracedt08", Standard - "tracedt09", Standard - "tracedt10", Standard - "tracedt11", Standard - "tracedt12", Standard - "tracedt13", Standard - "tracedt14", Standard - "tracedt15", Standard - "txdata3g0", Standard - "txpwrind", Standard - "uartb1_ucts", Standard - "uartb1_urts", Standard - "uartb1_urxd", Standard - "uartb1_utxd", Standard - "uartb2_urxd", Standard - "uartb2_utxd", Standard - "uartb3_ucts", Standard - "uartb3_urts", Standard - "uartb3_urxd", Standard - "uartb3_utxd", Standard - "uartb4_ucts", Standard - "uartb4_urts", Standard - "uartb4_urxd", Standard - "uartb4_utxd", Standard - "vc_cam1_scl", I2C - "vc_cam1_sda", I2C - "vc_cam2_scl", I2C - "vc_cam2_sda", I2C - "vc_cam3_scl", I2C - "vc_cam3_sda", I2C diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml new file mode 100644 index 000000000000..90c275295199 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM281xx pin controller + +maintainers: + - Florian Fainelli <florian.fainelli@broadcom.com> + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + const: brcm,bcm11351-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '-grp[0-9]$': + type: object + unevaluatedProperties: false + + properties: + pins: + description: + Specifies the name(s) of one or more pins to be configured by + this node. + items: + enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, + classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2, + clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1, + cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq, + digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00, + gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14, + gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe, + lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4, + lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1, + mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6, + mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2, + mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6, + mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14, + mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n, + mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1, + mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1, + nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle, + nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1, + pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g, + rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1, + rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0, + rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3, + rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1, + rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3, + sim_clk, sim_data, sim_det, sim_resetn, sim2_clk, + sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e, + ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, + ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk, + ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd, + ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk, + ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken, + traceclk, tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, tracedt08 + tracedt09, tracedt10, tracedt11, tracedt12, tracedt13 + tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts, + uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd, + uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd, + uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd, + uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + + function: + description: + Specifies the pin mux selection. + enum: [ alt1, alt2, alt3, alt4 ] + + slew-rate: + description: | + Meaning depends on configured pin mux: + *_scl or *_sda: + 0: Standard (100 kbps) & Fast (400 kbps) mode + 1: Highspeed (3.4 Mbps) mode + ic_dm or ic_dp: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate + + bias-disable: true + input-disable: true + input-enable: true + + required: + - pins + + allOf: + - $ref: pincfg-node.yaml# + + # Optional properties for standard pins + - if: + properties: + pins: + contains: + enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0, + clkout_1, clkout_2, clkout_3, clkreq_in_0, + clkreq_in_1, cws_sys_req1, cws_sys_req2, + cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk, + digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01, + gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, + gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, + lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, + lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7, + lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3, + mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8, + mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3, + mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7, + mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, + mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0, + mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n, + mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk, + mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2, + nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, + nand_cle, nand_oen, nand_rdy_0, nand_rdy_1, + nand_wen, nand_wp, pc1, pc2, pmu_int, + rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc, + rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2, + rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, + rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2, + rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc, + rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2, + rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, + sdio4_data_3, sim_clk, sim_data, sim_det, + sim_resetn, sim2_clk, sim2_data, sim2_det, + sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk, + ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk, + ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, + ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, + ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs, + ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd, + ssp6_txd, stat_1, stat_2, sysclken, traceclk, + tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, + tracedt08, tracedt09, tracedt10, tracedt11, + tracedt12, tracedt13, tracedt14, tracedt15, + txdata3g0, txpwrind, uartb1_ucts, uartb1_urts, + uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd, + uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd, + uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ] + then: + properties: + drive-strength: + enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ] + + bias-disable: true + bias-pull-up: true + bias-pull-down: true + input-schmitt-enable: true + input-schmitt-disable: true + + # Optional properties for I2C pins + - if: + properties: + pins: + contains: + enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl, + pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + then: + properties: + bias-pull-up: + description: + There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available + in parallel for I2C pins. + enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ] + + bias-disable: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pinctrl@35004800 { + compatible = "brcm,bcm11351-pinctrl"; + reg = <0x35004800 0x430>; + + dev-a-active-pins { + /* group node defining 1 standard pin */ + std-grp0 { + pins = "gpio00"; + function = "alt1"; + input-schmitt-enable; + bias-disable; + slew-rate = <1>; + drive-strength = <4>; + }; + + /* group node defining 2 I2C pins */ + i2c-grp0 { + pins = "bsc1_scl", "bsc1_sda"; + function = "alt2"; + bias-pull-up = <720>; + input-enable; + }; + + /* group node defining 2 HDMI pins */ + hdmi-grp0 { + pins = "hdmi_scl", "hdmi_sda"; + function = "alt3"; + slew-rate = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 739a08f00467..beb769e887c7 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -11,7 +11,7 @@ maintainers: description: The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) - controller allows assiging any of 256 possible functions to any of + controller allows assigning any of 256 possible functions to any of 48 IO pins of the SoC. Pin function configuration is performed on a per-pin basis. diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml index 222d57541b65..7f30ec2f1e54 100644 --- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml @@ -51,6 +51,10 @@ properties: description: Optional power supply. + reset-gpios: + description: GPIO connected to the XRES pin + maxItems: 1 + patternProperties: '-pins$': type: object diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index 35723966b70a..890961826c6f 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -135,7 +135,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -147,8 +146,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true additionalProperties: type: object allOf: @@ -156,7 +153,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 7f0e2d6cd6d9..3bbc00df5548 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -159,7 +159,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml index 601d86aecdd4..68e91c05f122 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml @@ -130,7 +130,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml index 10717cee9058..74d52a741f6f 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml @@ -386,7 +386,7 @@ patternProperties: mediatek,pull-up-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. @@ -398,7 +398,7 @@ patternProperties: mediatek,pull-down-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 0f615ada290a..5ad65135fe1c 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -332,7 +332,7 @@ patternProperties: mediatek,pull-up-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. @@ -344,7 +344,7 @@ patternProperties: mediatek,pull-down-adv: description: | Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' - Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index ff24cf29eea7..8507bd15f243 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -143,7 +143,7 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml index 61b33b5416f5..7b43e7857281 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml @@ -149,7 +149,7 @@ patternProperties: deprecated: true description: | DEPRECATED: Please use bias-pull-up instead. - Pull up setings for 2 pull resistors, R0 and R1. User can + Pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Valid arguments are described as below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml index 065dedb3573a..1690c0ef553a 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml index f924652bef0d..9b7368bd3862 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml @@ -32,8 +32,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml index 60a4bdf01bf2..87b6f4f42f25 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml @@ -23,8 +23,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml index 432ea40209a8..63cd743a30e0 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml @@ -24,8 +24,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml index 28ae2e6d0cbc..e99387a6da5e 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml index c0eda7848767..36c8f3301a8f 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt deleted file mode 100644 index b1159434f593..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Oxford Semiconductor OXNAS SoC Family Pin Controller - -Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and -../interrupt-controller/interrupts.txt for generic information regarding -pin controller, GPIO, and interrupt bindings. - -OXNAS 'pin configuration node' is a node of a group of pins which can be -used for a specific device or function. This node represents configurations of -pins, optional function, and optional mux related configuration. - -Required properties for pin controller node: - - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl" - - oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Required properties for pin configuration sub-nodes: - - pins: List of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes: ----------------------------------------------------- - - function: Mux function for the specified pins. - - bias-pull-up: Enable weak pull-up. - -Example: - -pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart2: pinctrl_uart2 { - uart2a { - pins = "gpio31"; - function = "fct3"; - }; - uart2b { - pins = "gpio32"; - function = "fct3"; - }; - }; -}; - -uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - resets = <&reset 22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt index 511fc234558b..28fbca180068 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt @@ -38,7 +38,7 @@ Valid values for function properties are: gpio, lpm-control-in, fps-out, 32k-out, sd0-dvs-in, sd1-dvs-in, reference-out -Theres is also customised properties for the GPIO1, GPIO2 and GPIO3. These +There are also customised properties for the GPIO1, GPIO2 and GPIO3. These customised properties are required to configure FPS configuration parameters of these GPIOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible Power Sequence (FPS). diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index 939cb5b6ffea..6ad49e51c72e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -40,7 +40,7 @@ on default. Valid values for function properties are: gpio. -Theres is also not customised properties for any GPIO. +There are also not customised properties for any GPIO. Example: -------- diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt deleted file mode 100644 index bfd222b05495..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ /dev/null @@ -1,262 +0,0 @@ -One-register-per-pin type device tree based pinctrl driver - -Required properties: -- compatible : "pinctrl-single" or "pinconf-single". - "pinctrl-single" means that pinconf isn't supported. - "pinconf-single" means that generic pinconf is supported. - -- reg : offset and length of the register set for the mux registers - -- #pinctrl-cells : number of cells in addition to the index, set to 1 - or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits - -- pinctrl-single,register-width : pinmux register access width in bits - -- pinctrl-single,function-mask : mask of allowed pinmux function bits - in the pinmux register - -Optional properties: -- pinctrl-single,function-off : function off mode for disabled state if - available and same for all registers; if not specified, disabling of - pin functions is ignored - -- pinctrl-single,bit-per-mux : boolean to indicate that one register controls - more than one pin, for which "pinctrl-single,function-mask" property specifies - position mask of pin. - -- pinctrl-single,drive-strength : array of value that are used to configure - drive strength in the pinmux register. They're value of drive strength - current and drive strength mask. - - /* drive strength current, mask */ - pinctrl-single,power-source = <0x30 0xf0>; - -- pinctrl-single,bias-pullup : array of value that are used to configure the - input bias pullup in the pinmux register. - - /* input, enabled pullup bits, disabled pullup bits, mask */ - pinctrl-single,bias-pullup = <0 1 0 1>; - -- pinctrl-single,bias-pulldown : array of value that are used to configure the - input bias pulldown in the pinmux register. - - /* input, enabled pulldown bits, disabled pulldown bits, mask */ - pinctrl-single,bias-pulldown = <2 2 0 2>; - - * Two bits to control input bias pullup and pulldown: User should use - pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means - pullup, and the other one bit means pulldown. - * Three bits to control input bias enable, pullup and pulldown. User should - use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias - enable bit should be included in pullup or pulldown bits. - * Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as - pinctrl-single,bias-disable. Because pinctrl single driver could implement - it by calling pulldown, pullup disabled. - -- pinctrl-single,input-schmitt : array of value that are used to configure - input schmitt in the pinmux register. In some silicons, there're two input - schmitt value (rising-edge & falling-edge) in the pinmux register. - - /* input schmitt value, mask */ - pinctrl-single,input-schmitt = <0x30 0x70>; - -- pinctrl-single,input-schmitt-enable : array of value that are used to - configure input schmitt enable or disable in the pinmux register. - - /* input, enable bits, disable bits, mask */ - pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>; - -- pinctrl-single,low-power-mode : array of value that are used to configure - low power mode of this pin. For some silicons, the low power mode will - control the output of the pin when the pad including the pin enter low - power mode. - /* low power mode value, mask */ - pinctrl-single,low-power-mode = <0x288 0x388>; - -- pinctrl-single,gpio-range : list of value that are used to configure a GPIO - range. They're value of subnode phandle, pin base in pinctrl device, pin - number in this range, GPIO function value of this GPIO range. - The number of parameters is depend on #pinctrl-single,gpio-range-cells - property. - - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>; - -- interrupt-controller : standard interrupt controller binding if using - interrupts for wake-up events for example. In this case pinctrl-single - is set up as a chained interrupt controller and the wake-up interrupts - can be requested by the drivers using request_irq(). - -- #interrupt-cells : standard interrupt binding if using interrupts - -This driver assumes that there is only one register for each pin (unless the -pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as -specified in the pinctrl-bindings.txt document in this directory. - -The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and values using pinctrl-single,pins. Only the bits specified -in pinctrl-single,function-mask are updated. - -When #pinctrl-cells = 1, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x118>; - -Where 0xdc is the offset from the pinctrl register base address for the device -pinctrl register, and 0x118 contains the desired value of the pinctrl register. - -When #pinctrl-cells = 2, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x30 0x07>; - -Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. -These two values are OR'd together to produce the value stored at offset 0xdc. -See the device example and static board pins example below for more information. - -In case when one register changes more than one pin's mux the -pinctrl-single,bits need to be used which takes three parameters: - - pinctrl-single,bits = <0xdc 0x18 0xff>; - -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to -be used when applying this change to the register. - - -Optional sub-node: In case some pins could be configured as GPIO in the pinmux -register, those pins could be defined as a GPIO range. This sub-node is required -by pinctrl-single,gpio-range property. - -Required properties in sub-node: -- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in - pinctrl-single,gpio-range property. - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; - - -Example: - -/* SoC common file */ - -/* first controller instance for pins in core domain */ -pmx_core: pinmux@4a100040 { - compatible = "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -/* second controller instance for pins in wkup domain */ -pmx_wkup: pinmux@4a31e040 { - compatible = "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -control_devconf0: pinmux@48002274 { - compatible = "pinctrl-single"; - reg = <0x48002274 4>; /* Single register */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x5F>; -}; - -/* third controller instance for pins in gpio domain */ -pmx_gpio: pinmux@d401e000 { - compatible = "pinconf-single"; - reg = <0xd401e000 0x0330>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <7>; - - /* sparse GPIO range could be supported */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>, - <&range 12 1 0>, <&range 13 29 1>, - <&range 43 1 0>, <&range 44 49 1>, - <&range 94 1 1>, <&range 96 2 1>; - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; -}; - - -/* board specific .dts file */ - -&pmx_core { - - /* - * map all board specific static pins enabled by the pinctrl driver - * itself during the boot (or just set them up in the bootloader) - */ - pinctrl-names = "default"; - pinctrl-0 = <&board_pins>; - - board_pins: pinmux_board_pins { - pinctrl-single,pins = < - 0x6c 0xf - 0x6e 0xf - 0x70 0xf - 0x72 0xf - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <0 2 2>; - pinctrl-single,bias-pullup = <0 1 1>; - }; - - /* map uart2 pins */ - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0xd8 0x118 - 0xda 0 - 0xdc 0x118 - 0xde 0 - >; - }; -}; - -&control_devconf0 { - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,bits = < - 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ - >; - }; - - mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { - pinctrl-single,bits = < - 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ - >; - }; - -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml new file mode 100644 index 000000000000..45a307d3ce16 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -0,0 +1,207 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Pin Controller with a Single Register for One or More Pins + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + Some pin controller devices use a single register for one or more pins. The + range of pin control registers can vary from one to many for each controller + instance. Some SoCs from Altera, Broadcom, HiSilicon, Ralink, and TI have this + kind of pin controller instances. + +properties: + compatible: + oneOf: + - enum: + - pinctrl-single + - pinconf-single + - items: + - enum: + - ti,am437-padconf + - ti,am654-padconf + - ti,dra7-padconf + - ti,omap2420-padconf + - ti,omap2430-padconf + - ti,omap3-padconf + - ti,omap4-padconf + - ti,omap5-padconf + - const: pinctrl-single + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pinctrl-cells': + description: + Number of cells. Usually 2, consisting of register offset, pin configuration + value, and pinmux mode. Some controllers may use 1 for just offset and value. + enum: [ 1, 2 ] + + pinctrl-single,bit-per-mux: + description: Optional flag to indicate register controls more than one pin + type: boolean + + pinctrl-single,function-mask: + description: Mask of the allowed register bits + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,function-off: + description: Optional function off mode for disabled state + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,register-width: + description: Width of pin specific bits in the register + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16, 32 ] + + pinctrl-single,gpio-range: + description: Optional list of pin base, nr pins & gpio function + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function + + '#gpio-range-cells': + description: No longer needed, may exist in older files for gpio-ranges + deprecated: true + const: 3 + + gpio-range: + description: Optional node for gpio range cells + type: object + additionalProperties: false + properties: + '#pinctrl-single,gpio-range-cells': + description: Number of gpio range cells + const: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '-pins(-[0-9]+)?$|-pin$': + description: + Pin group node name using naming ending in -pins followed by an optional + instance number + type: object + additionalProperties: false + + properties: + pinctrl-single,pins: + description: + Array of pins as described in pinmux-node.yaml for pinctrl-pin-array + $ref: /schemas/types.yaml#/definitions/uint32-array + + pinctrl-single,bits: + description: Register bit configuration for pinctrl-single,bit-per-mux + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: register offset + - description: value + - description: pin bitmask in the register + + pinctrl-single,bias-pullup: + description: Optional bias pull up configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull up bits + - description: disabled pull up bits + - description: bias pull up mask + + pinctrl-single,bias-pulldown: + description: Optional bias pull down configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull down bits + - description: disabled pull down bits + - description: bias pull down mask + + pinctrl-single,drive-strength: + description: Optional drive strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: drive strength current + - description: drive strength mask + + pinctrl-single,input-schmitt: + description: Optional input schmitt configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enable bits + - description: disable bits + - description: input schmitt mask + + pinctrl-single,low-power-mode: + description: Optional low power mode configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: low power mode value + - description: low power mode mask + + pinctrl-single,slew-rate: + description: Optional slew rate configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: slew rate + - description: slew rate mask + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - pinctrl-single,register-width + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + pinmux@4a100040 { + compatible = "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; + pinctrl-single,gpio-range = <&range 0 3 0>; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + uart2-pins { + pinctrl-single,pins = + <0xd8 0x118>, + <0xda 0>, + <0xdc 0x118>, + <0xde 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 8aaf50181cef..3f8ad07c7cfd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -26,6 +26,7 @@ properties: - qcom,pm6350-gpio - qcom,pm7250b-gpio - qcom,pm7325-gpio + - qcom,pm7550ba-gpio - qcom,pm8005-gpio - qcom,pm8008-gpio - qcom,pm8018-gpio @@ -53,6 +54,8 @@ properties: - qcom,pm8994-gpio - qcom,pm8998-gpio - qcom,pma8084-gpio + - qcom,pmc8180-gpio + - qcom,pmc8180c-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio - qcom,pmi8994-gpio @@ -68,6 +71,7 @@ properties: - qcom,pms405-gpio - qcom,pmx55-gpio - qcom,pmx65-gpio + - qcom,pmx75-gpio - enum: - qcom,spmi-gpio @@ -172,6 +176,7 @@ allOf: compatible: contains: enum: + - qcom,pm7550ba-gpio - qcom,pm8226-gpio - qcom,pm8350b-gpio - qcom,pm8550ve-gpio @@ -301,6 +306,7 @@ allOf: contains: enum: - qcom,pmx65-gpio + - qcom,pmx75-gpio then: properties: gpio-line-names: @@ -413,6 +419,7 @@ $defs: - gpio1-gpio9 for pm6350 - gpio1-gpio12 for pm7250b - gpio1-gpio10 for pm7325 + - gpio1-gpio8 for pm7550ba - gpio1-gpio4 for pm8005 - gpio1-gpio2 for pm8008 - gpio1-gpio6 for pm8018 @@ -456,6 +463,7 @@ $defs: - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) - gpio1-gpio16 for pmx65 + - gpio1-gpio16 for pmx75 items: pattern: "^gpio([0-9]+)$" diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml index e608a4f1bcae..e119a226a4b1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -87,7 +87,7 @@ $defs: emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0, emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio, emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3, - gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c, + gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c, jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4, diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index fa51fa9536f7..00c5a00e35fc 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -17,11 +17,6 @@ properties: compatible: const: qcom,sc7280-lpass-lpi-pinctrl - qcom,adsp-bypass-mode: - description: - Tells ADSP is in bypass mode. - type: boolean - reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..abac3311fc55 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 SoC LPASS LPI TLMM + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM6115 SoC. + +properties: + compatible: + const: qcom,sm6115-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Audio voting clock + + clock-names: + items: + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm6115-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm6115-lpass-state" + additionalProperties: false + +$defs: + qcom-sm6115-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-8])$" + + function: + enum: [ dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, gpio, i2s1_clk, + i2s1_data, i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, + i2s3_data, i2s3_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, + swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_mclk ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0a7c0000 0x20000>, + <0x0a950000 0x10000>; + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..2e65ae08dd21 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8350 SoC. + +properties: + compatible: + const: qcom,sm8350-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8350-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8350-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8350-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8350-lpass-lpi-pinctrl"; + reg = <0x033c0000 0x20000>, + <0x03550000 0x10000>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index 0fc3c0f52c19..181cd1676c0a 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -107,7 +107,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true function: true groups: true pins: true @@ -127,9 +126,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml index 83800fcf0ce4..2bd7d47d0fdb 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -108,7 +108,6 @@ additionalProperties: Integers values in "pinmux" argument list are assembled as: ((PORT * 16 + PIN) | MUX_FUNC << 16) - phandle: true input-enable: true output-enable: true @@ -118,9 +117,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index 37173a64fed2..8271e7b2c162 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -37,40 +37,37 @@ properties: gpio-ranges: maxItems: 1 -patternProperties: - "^.*$": - if: - type: object - then: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# +additionalProperties: + type: object + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + The child nodes of the pin controller designate pins to be used for + specific peripheral functions or as GPIO. + + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, + pin number and the desired function index. Use the RZA2_PINMUX macro + located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily + define these. + For assigning GPIO pins, use the macro RZA2_PIN also in + to express the desired port pin. + + properties: + pinmux: description: - The child nodes of the pin controller designate pins to be used for - specific peripheral functions or as GPIO. + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZA2_PINMUX() + helper macro in r7s9210-pinctrl.h. - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - The values for the pinmux properties are a combination of port name, - pin number and the desired function index. Use the RZA2_PINMUX macro - located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily - define these. - For assigning GPIO pins, use the macro RZA2_PIN also in - to express the desired port pin. + required: + - pinmux - properties: - phandle: true - - pinmux: - description: - Values are constructed from GPIO port number, pin number, and - alternate function configuration number using the RZA2_PINMUX() - helper macro in r7s9210-pinctrl.h. - - required: - - pinmux - - additionalProperties: false + additionalProperties: false allOf: - $ref: pinctrl.yaml# @@ -82,8 +79,6 @@ required: - '#gpio-cells' - gpio-ranges -additionalProperties: false - examples: - | #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 9ce1a07fc015..145c5442f268 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -83,7 +83,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -106,9 +105,6 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml index 19d4d2facfb4..816688580e33 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -74,7 +74,6 @@ additionalProperties: offset by 10. Additional identifiers are provided to specify the MDIO source peripheral. - phandle: true bias-disable: true bias-pull-up: description: Pull up the pin with 50 kOhm @@ -91,9 +90,6 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index c87161f2954f..cb81a17bd0b1 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -63,7 +63,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -87,9 +86,6 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml index a6f34df82e90..880da721a927 100644 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -32,7 +32,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -49,7 +48,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt index b1cea7a3a071..779b8ef0f6e6 100644 --- a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt @@ -8,7 +8,7 @@ to configure for some global common configuration, such as domain pad driving level, system control select and so on ("domain pad driving level": One pin can output 3.0v or 1.8v, depending on the related domain pad driving selection, if the related domain pad -slect 3.0v, then the pin can output 3.0v. "system control" is used +select 3.0v, then the pin can output 3.0v. "system control" is used to choose one function (like: UART0) for which system, since we have several systems (AP/CP/CM4) on one SoC.). diff --git a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt deleted file mode 100644 index 88c80273da91..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt +++ /dev/null @@ -1,13 +0,0 @@ -OMAP Pinctrl definitions - -Required properties: -- compatible : Should be one of: - "ti,omap2420-padconf" - OMAP2420 compatible pinctrl - "ti,omap2430-padconf" - OMAP2430 compatible pinctrl - "ti,omap3-padconf" - OMAP3 compatible pinctrl - "ti,omap4-padconf" - OMAP4 compatible pinctrl - "ti,omap5-padconf" - OMAP5 compatible pinctrl - "ti,dra7-padconf" - DRA7 compatible pinctrl - "ti,am437-padconf" - AM437x compatible pinctrl - -See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details. diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 24ad0614e61b..01b6f2b57843 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -273,6 +273,10 @@ patternProperties: slew-rate: enum: [0, 1] + output-enable: + description: + This will internally disable the tri-state for MIO pins. + drive-strength: description: Selects the drive strength for MIO pins, in mA. diff --git a/Documentation/devicetree/bindings/pmem/pmem-region.txt b/Documentation/devicetree/bindings/pmem/pmem-region.txt index 5cfa4f016a00..cd79975e85ec 100644 --- a/Documentation/devicetree/bindings/pmem/pmem-region.txt +++ b/Documentation/devicetree/bindings/pmem/pmem-region.txt @@ -19,7 +19,7 @@ Required properties: - compatible = "pmem-region" - reg = <base, size>; - The reg property should specificy an address range that is + The reg property should specify an address range that is translatable to a system physical address range. This address range should be mappable as normal system memory would be (i.e cacheable). @@ -30,7 +30,7 @@ Required properties: node implies no special relationship between the two ranges. Optional properties: - - Any relevant NUMA assocativity properties for the target platform. + - Any relevant NUMA associativity properties for the target platform. - volatile; This property indicates that this region is actually backed by non-persistent memory. This lets the OS know that it diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml index eab21bb2050a..d80bbedfe3aa 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml @@ -12,7 +12,7 @@ maintainers: - Jianxin Pan <jianxin.pan@amlogic.com> description: |+ - Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node + Secure Power Domains used in Meson A1/C1/S4 & C3 SoCs, and should be the child node of secure-monitor. properties: @@ -20,6 +20,7 @@ properties: enum: - amlogic,meson-a1-pwrc - amlogic,meson-s4-pwrc + - amlogic,c3-pwrc "#power-domain-cells": const: 1 diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index f9c211a9a938..9b03c41d3604 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -41,6 +41,7 @@ properties: - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd - qcom,sdx65-rpmhpd + - qcom,sdx75-rpmhpd - qcom,sm6115-rpmpd - qcom,sm6125-rpmpd - qcom,sm6350-rpmhpd diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml index 559718997de7..fba6914ec40d 100644 --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml @@ -58,7 +58,7 @@ $defs: pd-node: type: object description: - PM domain node representing a PM domain. This node hould be named by + PM domain node representing a PM domain. This node should be named by the real power area name, and thus its name should be unique. properties: diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml index 45d66c775115..b54ec003a1e0 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml# diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml index d3d18e0f5db3..53535de0d41c 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml +++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml# diff --git a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml index f2ffdd29d52a..965a834a3dbe 100644 --- a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml +++ b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/restart-handler.yaml# diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml index 4fe9c3705265..a76afe3ca299 100644 --- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (C) 2020 Texas Instruments Incorporated %YAML 1.2 --- diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml index 99f506d6b0a0..f255f3858d08 100644 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: SBS compliant manger +title: SBS compliant manager maintainers: - Sebastian Reichel <sre@kernel.org> diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt deleted file mode 100644 index 54b9f9d0f90f..000000000000 --- a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt +++ /dev/null @@ -1,34 +0,0 @@ ------------------------------------------------------------ -Device Tree Bindings for the Xilinx Zynq MPSoC PM domains ------------------------------------------------------------ -The binding for zynqmp-power-controller follow the common -generic PM domain binding[1]. - -[1] Documentation/devicetree/bindings/power/power-domain.yaml - -== Zynq MPSoC Generic PM Domain Node == - -Required property: - - Below property should be in zynqmp-firmware node. - - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1. - -Power domain ID indexes are mentioned in -include/dt-bindings/power/xlnx-zynqmp-power.h. - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - ... - #power-domain-cells = <1>; - ... - }; -}; - -sata { - ... - power-domains = <&zynqmp_firmware 28>; - ... -}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt index 801c66069121..4787db8de23f 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt @@ -28,6 +28,6 @@ PROPERTIES Snoop ID Port Mapping registers, which are part of the CoreNet Coherency fabric (CCF), provide a CoreNet Coherency Subdomain ID/CoreNet Snoop ID to cpu mapping functions. Certain bits from - these registers should be set if the coresponding CPU should be + these registers should be set if the corresponding CPU should be snooped. This property defines a bitmask which selects the bit that should be set if this cpu should be snooped. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt index 4b01e1afafda..62744afb5b75 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt @@ -185,10 +185,10 @@ PROPERTIES with distinct functionality. The first register range describes the CoreNet Debug Controller - functionalty to perform transaction and transaction attribute matches. + functionality to perform transaction and transaction attribute matches. The second register range describes the CoreNet Debug Controller - functionalty to trigger event notifications and debug traces. + functionality to trigger event notifications and debug traces. EXAMPLE dcsr-corenet { diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt index 4ad29b9ac2ac..ea902bc5873d 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt @@ -60,7 +60,7 @@ Optional property: - fsl,liodn: Specifies the LIODN to be used for Job Ring. This property is normally set by firmware. Value is of 12-bits which is the LIODN number for this JR. - This property is used by the IOMMU (PAMU) to distinquish + This property is used by the IOMMU (PAMU) to distinguish transactions from this JR and than be able to do address translation & protection accordingly. diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt index b558585b1aaf..3826bd1219d1 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt @@ -42,7 +42,7 @@ Nintendo GameCube device tree - compatible : should be "nintendo,flipper-pic" -1.c) The Digital Signal Procesor (DSP) node +1.c) The Digital Signal Processor (DSP) node Represents the digital signal processor interface, designed to offload audio related tasks. diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt index 3ff6ebbb4998..6f69a9dfe198 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt @@ -53,7 +53,7 @@ Nintendo Wii device tree - compatible : should be "nintendo,flipper-pic" - interrupt-controller -1.c) The Digital Signal Procesor (DSP) node +1.c) The Digital Signal Processor (DSP) node Represents the digital signal processor interface, designed to offload audio related tasks. diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt deleted file mode 100644 index 9012a2a02e14..000000000000 --- a/Documentation/devicetree/bindings/pps/pps-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -Device-Tree Bindings for a PPS Signal on GPIO - -These properties describe a PPS (pulse-per-second) signal connected to -a GPIO pin. - -Required properties: -- compatible: should be "pps-gpio" -- gpios: one PPS GPIO in the format described by ../gpio/gpio.txt - -Additional required properties for the PPS ECHO functionality: -- echo-gpios: one PPS ECHO GPIO in the format described by ../gpio/gpio.txt -- echo-active-ms: duration in ms of the active portion of the echo pulse - -Optional properties: -- assert-falling-edge: when present, assert is indicated by a falling edge - (instead of by a rising edge) - -Example: - pps { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pps>; - - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - assert-falling-edge; - - echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - echo-active-ms = <100>; - - compatible = "pps-gpio"; - }; diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.yaml b/Documentation/devicetree/bindings/pps/pps-gpio.yaml new file mode 100644 index 000000000000..fd4adfa8d2d4 --- /dev/null +++ b/Documentation/devicetree/bindings/pps/pps-gpio.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pps/pps-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PPS Signal via GPIO + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +properties: + compatible: + const: pps-gpio + + gpios: + description: The GPIO that provides the PPS signal. + maxItems: 1 + + echo-gpios: + description: The GPIO that provides the PPS ECHO signal. + maxItems: 1 + + echo-active-ms: + description: Duration in ms of the active portion of the echo pulse. + + assert-falling-edge: + description: Indicates a falling edge assert, when present. Rising edge if absent. + type: boolean + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + assert-falling-edge; + echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + echo-active-ms = <100>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml index fe603fb1b2cc..2162f661ed5a 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -20,12 +20,17 @@ description: |+ properties: compatible: - enum: - - samsung,s3c2410-pwm # 16-bit, S3C24xx - - samsung,s3c6400-pwm # 32-bit, S3C64xx - - samsung,s5p6440-pwm # 32-bit, S5P64x0 - - samsung,s5pc100-pwm # 32-bit, S5PC100, S5PV210, Exynos4210 rev0 SoCs - - samsung,exynos4210-pwm # 32-bit, Exynos + oneOf: + - enum: + - samsung,s3c2410-pwm # 16-bit, S3C24xx + - samsung,s3c6400-pwm # 32-bit, S3C64xx + - samsung,s5p6440-pwm # 32-bit, S5P64x0 + - samsung,s5pc100-pwm # 32-bit, S5PC100, S5PV210, Exynos4210 rev0 SoCs + - samsung,exynos4210-pwm # 32-bit, Exynos + - items: + - enum: + - samsung,exynosautov9-pwm + - const: samsung,exynos4210-pwm reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml index 9aabdb373afa..4d0b5964443d 100644 --- a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml +++ b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml @@ -18,7 +18,7 @@ description: The IP block has a version register so this can be used for detection instead of having to encode the IP version number in the device tree - comaptible. + compatible. allOf: - $ref: pwm.yaml# diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml index 3725348bb235..02f45b5834d0 100644 --- a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml @@ -28,75 +28,37 @@ properties: the VSEL pin is assumed to be low. type: boolean - regulators: - type: object - additionalProperties: false + inl1-supply: + description: Handle to the INL1 input supply (REG5-7) - properties: - REG1: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + inl2-supply: + description: Handle to the INL2 input supply (REG8-9) - properties: - vp1-supply: - description: Handle to the VP1 input supply + inl3-supply: + description: Handle to the INL3 input supply (REG10-12) - REG2: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp1-supply: + description: Handle to the VP1 input supply (REG1) - properties: - vp2-supply: - description: Handle to the VP2 input supply + vp2-supply: + description: Handle to the VP2 input supply (REG2) - REG3: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp3-supply: + description: Handle to the VP3 input supply (REG3) - properties: - vp3-supply: - description: Handle to the VP3 input supply - - REG4: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp4-supply: + description: Handle to the VP4 input supply (REG4) - properties: - vp4-supply: - description: Handle to the VP4 input supply + regulators: + type: object + additionalProperties: false patternProperties: - "^REG[5-7]$": + "^REG([1-9]|1[0-2])$": type: object $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false - properties: - inl1-supply: - description: Handle to the INL1 input supply - - "^REG[8-9]$": - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false - - properties: - inl2-supply: - description: Handle to the INL2 input supply - - "^REG1[0-2]$": - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false - - properties: - inl3-supply: - description: Handle to the INL3 input supply - additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/regulator/adi,max77857.yaml b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml new file mode 100644 index 000000000000..d1fa74aca721 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/adi,max77857.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX77857 Buck-Boost Converter + +maintainers: + - Ibrahim Tilki <Ibrahim.Tilki@analog.com> + - Okan Sahin <Okan.Sahin@analog.com> + +description: Analog Devices MAX77857 Buck-Boost Converter + +properties: + compatible: + enum: + - adi,max77831 + - adi,max77857 + - adi,max77859 + - adi,max77859a + + reg: + description: I2C address of the device + items: + - enum: [0x66, 0x67, 0x6E, 0x6F] + + interrupts: + maxItems: 1 + + adi,switch-frequency-hz: + description: Switching frequency of the Buck-Boost converter in Hz. + items: + - enum: [1200000, 1500000, 1800000, 2100000] + + adi,rtop-ohms: + description: Top feedback resistor value in ohms for external feedback. + minimum: 150000 + maximum: 330000 + + adi,rbot-ohms: + description: Bottom feedback resistor value in ohms for external feedback. + +dependencies: + adi,rtop-ohms: [ 'adi,rbot-ohms' ] + adi,rbot-ohms: [ 'adi,rtop-ohms' ] + +required: + - compatible + - reg + +allOf: + - $ref: regulator.yaml# + - if: + properties: + compatible: + contains: + enum: + - adi,max77831 + + then: + properties: + adi,switch-frequency-hz: + items: + enum: [1200000, 1500000, 1800000] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@66 { + reg = <0x66>; + compatible = "adi,max77857"; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + adi,rtop-ohms = <312000>; + adi,rbot-ohms = <12000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file mode 100644 index 000000000000..c92a881ed60e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW37503 Voltage Regulator + +maintainers: + - Alec Li <like@awinic.com> + +description: + The AW37503 are dual voltage regulator, designed to support positive/negative + supply for driving TFT-LCD panels. It support software-configurable output + switching and monitoring. The output voltages can be programmed via an I2C + compatible interface. + +properties: + compatible: + const: awinic,aw37503 + + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single regulator. + + properties: + enable-gpios: + maxItems: 1 + description: + GPIO specifier to enable the GPIO control (on/off) for regulator. + + required: + - regulator-name + +required: + - compatible + - reg + - outp + - outn + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3e { + compatible = "awinic,aw37503"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml index dc626517c2ad..13b3f75f8e5e 100644 --- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml @@ -95,11 +95,6 @@ properties: Properties for a single BUCK regulator properties: - regulator-name: - pattern: "^BUCK([1-2])$" - description: | - BUCK2 present in DA9122, DA9220, DA9131, DA9132 only - regulator-initial-mode: enum: [ 0, 1, 2, 3 ] description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h @@ -122,6 +117,23 @@ required: - reg - regulators +allOf: + - if: + properties: + compatible: + not: + contains: + enum: + - dlg,da9122 + - dlg,da9131 + - dlg,da9132 + - dlg,da9220 + then: + properties: + regulators: + properties: + buck2: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml new file mode 100644 index 000000000000..bad140418e49 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,slg51000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor SLG51000 Voltage Regulator + +maintainers: + - Eric Jeong <eric.jeong.opensource@diasemi.com> + - Support Opensource <support.opensource@diasemi.com> + +properties: + compatible: + const: dlg,slg51000 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dlg,cs-gpios: + maxItems: 1 + description: + GPIO for chip select + + vin3-supply: + description: + Input supply for ldo3, required if regulator is enabled + + vin4-supply: + description: + Input supply for ldo4, required if regulator is enabled + + vin5-supply: + description: + Input supply for ldo5, required if regulator is enabled + + vin6-supply: + description: + Input supply for ldo6, required if regulator is enabled + + vin7-supply: + description: + Input supply for ldo7, required if regulator is enabled + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^ldo[1-7]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + enable-gpios: + maxItems: 1 + + required: + - regulator-name + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9121-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + vin5-supply = <&vreg_s1f_1p2>; + vin6-supply = <&vreg_s1f_1p2>; + + regulators { + ldo1 { + regulator-name = "slg51000_b_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "slg51000_b_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "slg51000_b_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo4 { + regulator-name = "slg51000_b_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo5 { + regulator-name = "slg51000_b_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "slg51000_b_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "slg51000_b_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index 2e720d152890..0221397eb51e 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -29,10 +29,12 @@ properties: patternProperties: "^buck[1-4]$": $ref: regulator.yaml# + unevaluatedProperties: false type: object "^ldo[1-4]$": $ref: regulator.yaml# + unevaluatedProperties: false type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index f3fcfc8be72f..6de5b027f990 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -21,7 +21,6 @@ properties: regulators: type: object - $ref: regulator.yaml# description: | list of regulators provided by this controller, must be named @@ -39,11 +38,13 @@ properties: ldortc: type: object $ref: regulator.yaml# + unevaluatedProperties: false patternProperties: "^ldo[1-4]$": type: object $ref: regulator.yaml# + unevaluatedProperties: false "^buck[1-4]$": type: object diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml index e384e4953f0a..0eda44752cdd 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -68,18 +68,22 @@ properties: "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^vgen[1-6]$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^vldo[1-4]$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$": $ref: regulator.yaml# type: object + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml index 8a08698e3484..b4eb4001eb3d 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml @@ -49,7 +49,7 @@ patternProperties: ".*-supply$": description: Input supply phandle(s) for this node - "^((s|l|lvs)[0-9]*)|(s[1-2][a-b])|(ncp)|(mvs)|(usb-switch)|(hdmi-switch)$": + "^((s|l|lvs)[0-9]*|s[1-2][a-b]|ncp|mvs|usb-switch|hdmi-switch)$": description: List of regulators and its properties $ref: regulator.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index b9498504ad79..127a6f39b7f0 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -53,6 +53,7 @@ description: | For PMR735A, smps1 - smps3, ldo1 - ldo7 For PMX55, smps1 - smps7, ldo1 - ldo16 For PMX65, smps1 - smps8, ldo1 - ldo21 + For PMX75, smps1 - smps10, ldo1 - ldo21 properties: compatible: @@ -84,13 +85,14 @@ properties: - qcom,pmr735a-rpmh-regulators - qcom,pmx55-rpmh-regulators - qcom,pmx65-rpmh-regulators + - qcom,pmx75-rpmh-regulators qcom,pmic-id: description: | RPMh resource name suffix used for the regulators found on this PMIC. $ref: /schemas/types.yaml#/definitions/string - enum: [a, b, c, d, e, f, g, h, k] + enum: [a, b, c, d, e, f, g, h, i, j, k, l, m, n] qcom,always-wait-for-ack: description: | @@ -109,6 +111,7 @@ properties: bob: type: object $ref: regulator.yaml# + unevaluatedProperties: false description: BOB regulator node. dependencies: regulator-allow-set-load: [ regulator-allowed-modes ] @@ -117,6 +120,7 @@ patternProperties: "^(smps|ldo|lvs|bob)[0-9]+$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: smps/ldo regulator nodes(s). dependencies: regulator-allow-set-load: [ regulator-allowed-modes ] @@ -424,10 +428,28 @@ allOf: vdd-l11-l13-supply: true patternProperties: "^vdd-l[1347]-supply$": true - "^vdd-l1[0245789]-supply$": true + "^vdd-l1[024579]-supply$": true "^vdd-l2[01]-supply$": true "^vdd-s[1-8]-supply$": true + - if: + properties: + compatible: + enum: + - qcom,pmx75-rpmh-regulators + then: + properties: + vdd-l2-l18-supply: true + vdd-l4-l16-supply: true + vdd-l5-l6-supply: true + vdd-l8-l9-supply: true + vdd-l11-l13-supply: true + vdd-l20-l21-supply: true + patternProperties: + "^vdd-l[137]-supply$": true + "^vdd-l1[024579]-supply$": true + "^vdd-s([1-9]|10)-supply$": true + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml new file mode 100644 index 000000000000..f02f97d4fdd2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,sdm845-refgen-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. REFGEN Regulator + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + The REFGEN (reference voltage generator) regulator provides reference + voltage for on-chip IPs (like PHYs) on some Qualcomm SoCs. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,sc7180-refgen-regulator + - qcom,sc8180x-refgen-regulator + - qcom,sm8150-refgen-regulator + - const: qcom,sdm845-refgen-regulator + + - items: + - enum: + - qcom,sc7280-refgen-regulator + - qcom,sc8280xp-refgen-regulator + - qcom,sm6350-refgen-regulator + - qcom,sm6375-refgen-regulator + - qcom,sm8350-refgen-regulator + - const: qcom,sm8250-refgen-regulator + + - enum: + - qcom,sdm845-refgen-regulator + - qcom,sm8250-refgen-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + regulator@162f000 { + compatible = "qcom,sm8250-refgen-regulator"; + reg = <0x0162f000 0x84>; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index a8ca8e0b27f8..9ea8ac0786ac 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -110,6 +110,7 @@ patternProperties: "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": description: List of regulators and its properties $ref: regulator.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt index 1c4bfe786736..bcf788897e44 100644 --- a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt +++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt @@ -35,7 +35,7 @@ information for that regulator. The definition for each of these nodes is defined using the standard binding for regulators found at <Documentation/devicetree/bindings/regulator/regulator.txt>. -Theres are also additional properties for SD/LDOs. These additional properties +There are also additional properties for SD/LDOs. These additional properties are required to configure FPS configuration parameters for SDs and LDOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible Power Sequence (FPS). diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index e158c2d3d3f9..9daf0fc2465f 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -126,7 +126,7 @@ properties: regulator-oc-error-microamp: description: Set over current error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested. + the hardware probably is malfunctional and damage prevention is requested. Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. @@ -146,7 +146,7 @@ properties: regulator-ov-error-microvolt: description: Set over voltage error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. Limit is given as microvolt offset from voltage set to regulator. @@ -168,7 +168,7 @@ properties: regulator-uv-error-microvolt: description: Set under voltage error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. Limit is given as microvolt offset from voltage set to regulator. @@ -189,7 +189,7 @@ properties: regulator-temp-error-kelvin: description: Set over temperature error limit. This is a limit where part of - the hardware propably is malfunctional and damage prevention is requested + the hardware probably is malfunctional and damage prevention is requested Zero can be passed to disable error detection and value '1' indicates that detection should be enabled but limit setting can be omitted. diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml index d9c23333e157..cd06e957b9db 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml @@ -29,6 +29,7 @@ patternProperties: "^DSV(LCM|P|N)$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: Properties for single Display Bias Voltage regulator. diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml index edb411be0390..89341fdaa3af 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml @@ -11,7 +11,7 @@ maintainers: description: | The RT5190A integrates 1 channel buck controller, 3 channels high efficiency - synchronous buck converters, 1 LDO, I2C control interface and peripherial + synchronous buck converters, 1 LDO, I2C control interface and peripheral logical control. It also supports mute AC OFF depop sound and quick setting storage while diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml index 358297dd3fb7..e95e046e9ed6 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml @@ -21,6 +21,7 @@ allOf: properties: compatible: enum: + - richtek,rt5733 - richtek,rt5739 reg: diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml index 446ec5127d1f..fec3d396ca50 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml @@ -121,6 +121,7 @@ properties: description: load switch current regulator description. type: object $ref: regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml new file mode 100644 index 000000000000..609c06615bdc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtq2208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTQ2208 SubPMIC Regulator + +maintainers: + - Alina Yu <alina_yu@richtek.com> + +description: | + RTQ2208 is a highly integrated power converter that offers functional safety dual + multi-configurable synchronous buck converters and two LDOs. + + Bucks support "regulator-allowed-modes" and "regulator-mode". The former defines the permitted + switching operation in normal mode; the latter defines the operation in suspend to RAM mode. + + No matter the RTQ2208 is configured to normal or suspend to RAM mode, there are two switching + operation modes for all buck rails, automatic power saving mode (Auto mode) and forced continuous + conduction mode (FCCM). + + The definition of modes is in the datasheet which is available in below link + and their meaning is:: + 0 - Auto mode for power saving, which reducing the switching frequency at light load condition + to maintain high frequency. + 1 - FCCM to meet the strict voltage regulation accuracy, which keeping constant switching frequency. + + Datasheet will be available soon at + https://www.richtek.com/assets/Products + +properties: + compatible: + enum: + - richtek,rtq2208 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + richtek,mtp-sel-high: + type: boolean + description: + vout register selection based on this boolean value. + false - Using DVS0 register setting to adjust vout + true - Using DVS1 register setting to adjust vout + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^buck-[a-h]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + description for buck-[a-h] regulator. + + properties: + regulator-allowed-modes: + description: + two buck modes in different switching accuracy. + 0 - Auto mode + 1 - FCCM + items: + enum: [0, 1] + + "^ldo[1-2]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + regulator description for ldo[1-2]. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@10 { + compatible = "richtek,rtq2208"; + reg = <0x10>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + richtek,mtp-sel-high; + + regulators { + buck-a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-c { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-d { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-e { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-f { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-g { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-h { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + ldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml index e6e5a9a7d940..ef62c618de67 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml @@ -35,6 +35,7 @@ properties: "^(p|n)avdd$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: | regulator description for pavdd and navdd. diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt deleted file mode 100644 index aa0733e49b90..000000000000 --- a/Documentation/devicetree/bindings/regulator/slg51000.txt +++ /dev/null @@ -1,88 +0,0 @@ -* Dialog Semiconductor SLG51000 Voltage Regulator - -Required properties: -- compatible : Should be "dlg,slg51000" for SLG51000 -- reg : Specifies the I2C slave address. -- xxx-supply: Input voltage supply regulator for ldo3 to ldo7. - These entries are required if regulators are enabled for a device. - An absence of these properties can cause the regulator registration to fail. - If some of input supply is powered through battery or always-on supply then - also it is required to have these parameters with proper node handle of always - on power supply. - vin3-supply: Input supply for ldo3 - vin4-supply: Input supply for ldo4 - vin5-supply: Input supply for ldo5 - vin6-supply: Input supply for ldo6 - vin7-supply: Input supply for ldo7 - -Optional properties: -- interrupt-parent : Specifies the reference to the interrupt controller. -- interrupts : IRQ line information. -- dlg,cs-gpios : Specify a valid GPIO for chip select - -Sub-nodes: -- regulators : This node defines the settings for the regulators. - The content of the sub-node is defined by the standard binding - for regulators; see regulator.txt. - - The SLG51000 regulators are bound using their names listed below: - ldo1 - ldo2 - ldo3 - ldo4 - ldo5 - ldo6 - ldo7 - -Optional properties for regulators: -- enable-gpios : Specify a valid GPIO for platform control of the regulator. - -Example: - pmic: slg51000@75 { - compatible = "dlg,slg51000"; - reg = <0x75>; - - regulators { - ldo1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - }; - - ldo3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - - ldo4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - - ldo5 { - regulator-name = "ldo5"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1200000>; - }; - - ldo6 { - regulator-name = "ldo6"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1200000>; - }; - - ldo7 { - regulator-name = "ldo7"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml index 7d53cfa2c288..c9586d277f41 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -25,8 +25,8 @@ properties: patternProperties: "^(reg11|reg18|usb33)$": type: object - $ref: regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/vctrl.txt b/Documentation/devicetree/bindings/regulator/vctrl.txt index 601328d7fdbb..e940377cfd69 100644 --- a/Documentation/devicetree/bindings/regulator/vctrl.txt +++ b/Documentation/devicetree/bindings/regulator/vctrl.txt @@ -21,7 +21,7 @@ Optional properties: margin from the expected value for a given control voltage. On larger voltage decreases this can occur undesiredly since the output voltage does not adjust - inmediately to changes in the control voltage. To + immediately to changes in the control voltage. To avoid this situation the vctrl driver breaks down larger voltage decreases into multiple steps, where each step is within the OVP threshold. diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml index 011819c10988..11e378648b3f 100644 --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -29,11 +29,13 @@ properties: Initial data for the LDO1 regulator. $ref: regulator.yaml# type: object + unevaluatedProperties: false micvdd: description: Initial data for the MICVDD regulator. $ref: regulator.yaml# type: object + unevaluatedProperties: false additionalProperties: true diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml index 7b43ad3daa56..e78a89c9ec41 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml @@ -14,9 +14,6 @@ description: related to the remote processor. properties: - $nodename: - const: glink-edge - apr: $ref: /schemas/soc/qcom/qcom,apr.yaml# required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml index f5a044e20c4e..884158bccd50 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml @@ -84,7 +84,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - rpm-glink { + glink-edge { compatible = "qcom,glink-rpm"; interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; mboxes = <&apcs_glb 0>; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml new file mode 100644 index 000000000000..7afafde17a38 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,rpm-proc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Resource Power Manager (RPM) Processor/Subsystem + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Konrad Dybcio <konrad.dybcio@linaro.org> + - Stephan Gerhold <stephan@gerhold.net> + +description: | + Resource Power Manager (RPM) subsystem found in various Qualcomm platforms: + + +--------------------------------------------+ + | RPM subsystem (qcom,rpm-proc) | + | | + reset | +---------------+ +-----+ +-----+ | + --------->| | | MPM | | CPR | ... | + IPC interrupts | | ARM Cortex-M3 |--- +-----+ +-----+ | + ----------------->| | | | | | + | +---------------+ |---------------------- | + | +---------------+ | | + | | Code RAM |--| +------------------+ | + | +---------------+ | | | | + | +---------------+ |--| Message RAM | | + | | Data RAM |--| | | | + | +---------------+ | +------------------+ | + +--------------------|-----------------------+ + v + NoC + + The firmware running on the processor inside the RPM subsystem allows each + component in the system to vote for state of the system resources, such as + clocks, regulators and bus frequencies. It implements multiple separate + communication interfaces that are described in subnodes, e.g. SMD and MPM: + + +------------------------------+ + | ARM Cortex-M3 | + | | +------------------------------+ + | +--------------------------+ | | Message RAM | + | | RPM firmware | | | | + IPC IRQ 0 | | +----------------------+ | | | +--------------------------+ | + -------------->| SMD server |<------->| SMD data structures | | + | | | +--------------+ | | | | | +--------------+ | | + | | | | rpm_requests | ... | | | | | | rpm_requests | ... | | + | | | +--------------+ | | | | | +--------------+ | | + IPC IRQ 1 | | +----------------------+ | | | +--------------------------+ | + -------------->| MPM virtualization |<--------| MPM register copy (vMPM) | | + | | +----------------------+ | | | +--------------------------+ | + | | ... | | | | ... | + | +--------------------|-----+ | +------------------------------+ + +----------------------|-------+ + v + +--------------+ + | MPM Hardware | + +--------------+ + + The services provided by the firmware are only available after the firmware + has been loaded and the processor has been released from reset. Usually this + happens early in the boot process before the operating system is started. + +properties: + compatible: + items: + - enum: + - qcom,apq8084-rpm-proc + - qcom,ipq6018-rpm-proc + - qcom,ipq9574-rpm-proc + - qcom,mdm9607-rpm-proc + - qcom,msm8226-rpm-proc + - qcom,msm8610-rpm-proc + - qcom,msm8909-rpm-proc + - qcom,msm8916-rpm-proc + - qcom,msm8917-rpm-proc + - qcom,msm8936-rpm-proc + - qcom,msm8937-rpm-proc + - qcom,msm8952-rpm-proc + - qcom,msm8953-rpm-proc + - qcom,msm8974-rpm-proc + - qcom,msm8976-rpm-proc + - qcom,msm8994-rpm-proc + - qcom,msm8996-rpm-proc + - qcom,msm8998-rpm-proc + - qcom,qcm2290-rpm-proc + - qcom,qcs404-rpm-proc + - qcom,sdm660-rpm-proc + - qcom,sm6115-rpm-proc + - qcom,sm6125-rpm-proc + - qcom,sm6375-rpm-proc + - const: qcom,rpm-proc + + smd-edge: + $ref: /schemas/remoteproc/qcom,smd-edge.yaml# + description: + Qualcomm Shared Memory subnode which represents communication edge, + channels and devices related to the RPM subsystem. + + glink-edge: + $ref: /schemas/remoteproc/qcom,glink-rpm-edge.yaml# + description: + Qualcomm G-Link subnode which represents communication edge, + channels and devices related to the RPM subsystem. + + interrupt-controller: + type: object + $ref: /schemas/interrupt-controller/qcom,mpm.yaml# + description: + MSM Power Manager (MPM) interrupt controller that monitors interrupts + when the system is asleep. + + master-stats: + $ref: /schemas/soc/qcom/qcom,rpm-master-stats.yaml# + description: + Subsystem-level low-power mode statistics provided by RPM. + +required: + - compatible + +oneOf: + - required: + - smd-edge + - required: + - glink-edge + +additionalProperties: false + +examples: + # SMD + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + remoteproc { + compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + /* ... */ + }; + }; + }; + # GLINK + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + remoteproc { + compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc"; + + glink-edge { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + /* ... */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml index af24f9a3cdf1..9a04d192e7e4 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml @@ -139,7 +139,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/mailbox/qcom-ipcc.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> remoteproc@30000000 { compatible = "qcom,sm8450-adsp-pas"; @@ -160,8 +160,8 @@ examples: memory-region = <&adsp_mem>; - power-domains = <&rpmhpd SM8450_LCX>, - <&rpmhpd SM8450_LMX>; + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; power-domain-names = "lcx", "lmx"; qcom,qmp = <&aoss_qmp>; diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml index f16e90380df1..9768db8663eb 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml index fcc3db97fe8f..a492f74a8608 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml# @@ -102,7 +102,7 @@ patternProperties: caches. Each of the TCMs can be enabled or disabled independently and either of them can be configured to appear at that R5F's address 0x0. - The cores do not use an MMU, but has a Region Address Translater + The cores do not use an MMU, but has a Region Address Translator (RAT) module that is accessible only from the R5Fs for providing translations between 32-bit CPU addresses into larger system bus addresses. Cache and memory access settings are provided through a diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml index 1fdc2741c36e..94eb2033e79c 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml index 35f0bb38f7b2..2811334515d1 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml index cd55d80137f7..baccd98754a9 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/ti,pru-rproc.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml index 9f677367dd9f..78aac69f1060 100644 --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/remoteproc/xlnx,zynqmp-r5fss.yaml# diff --git a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml new file mode 100644 index 000000000000..f9b2f0fdc282 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra CPU-NS - BPMP IPC reserved memory + +maintainers: + - Peter De Schrijver <pdeschrijver@nvidia.com> + +description: | + Define a memory region used for communication between CPU-NS and BPMP. + Typically this node is created by the bootloader as the physical address + has to be known to both CPU-NS and BPMP for correct IPC operation. + The memory region is defined using a child node under /reserved-memory. + The sub-node is named shmem@<address>. + +allOf: + - $ref: reserved-memory.yaml + +properties: + compatible: + const: nvidia,tegra264-bpmp-shmem + + reg: + description: The physical address and size of the shared SDRAM region + +unevaluatedProperties: false + +required: + - compatible + - reg + - no-map + +examples: + - | + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + dram_cpu_bpmp_mail: shmem@f1be0000 { + compatible = "nvidia,tegra264-bpmp-shmem"; + reg = <0x0 0xf1be0000 0x0 0x2000>; + no-map; + }; + }; +... diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml index 4379cec6b35a..761c70cf9ddf 100644 --- a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml +++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Altera SOCFPGA Reset Manager maintainers: - - Dinh Nguyen <dinguyen@altera.com> + - Dinh Nguyen <dinguyen@kernel.org> properties: compatible: @@ -32,9 +32,17 @@ properties: required: - compatible - reg - - altr,modrst-offset - '#reset-cells' +if: + properties: + compatible: + contains: + const: altr,stratix10-rst-mgr +then: + properties: + altr,modrst-offset: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml index dcf9206e12be..e10eb98eddad 100644 --- a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml# diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml index f436f2cf1df7..6063784f0352 100644 --- a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml +++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml# diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt index 86945502ccb5..61a0ff33e89f 100644 --- a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -43,7 +43,7 @@ Required properties: Cell #6 : bit position of the reset in the reset status register Cell #7 : Flags used to control reset behavior, - availible flags defined in the DT include + available flags defined in the DT include file <dt-bindings/reset/ti-syscon.h> SysCon Reset Consumer Nodes diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml index 0d50f6a54af3..49db66801429 100644 --- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml @@ -32,6 +32,7 @@ properties: enum: - xlnx,zynqmp-reset - xlnx,versal-reset + - xlnx,versal-net-reset "#reset-cells": const: 1 diff --git a/Documentation/devicetree/bindings/riscv/thead.yaml b/Documentation/devicetree/bindings/riscv/thead.yaml index e62f6821372e..301912dcd290 100644 --- a/Documentation/devicetree/bindings/riscv/thead.yaml +++ b/Documentation/devicetree/bindings/riscv/thead.yaml @@ -17,6 +17,10 @@ properties: const: '/' compatible: oneOf: + - description: BeagleV Ahead single board computer + items: + - const: beagle,beaglev-ahead + - const: thead,th1520 - description: Sipeed Lichee Pi 4A board for the Sipeed Lichee Module 4A items: - enum: diff --git a/Documentation/devicetree/bindings/rng/omap_rng.yaml b/Documentation/devicetree/bindings/rng/omap_rng.yaml index ccf54fae8302..c0ac4f68ea54 100644 --- a/Documentation/devicetree/bindings/rng/omap_rng.yaml +++ b/Documentation/devicetree/bindings/rng/omap_rng.yaml @@ -30,8 +30,8 @@ properties: clocks: minItems: 1 items: - - description: EIP150 gatable clock - - description: Main gatable clock + - description: EIP150 gateable clock + - description: Main gateable clock clock-names: minItems: 1 diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt index b94b35f3600b..7d7b5f6bda65 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt @@ -10,7 +10,7 @@ Optional properties: - ctrl-reg : Contains the initial value of the control register also called "Register B". - freq-reg : Contains the initial value of the frequency register also - called "Regsiter A". + called "Register A". "Register A" and "B" are usually initialized by the firmware (BIOS for instance). If this is not done, it can be performed by the driver. diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml index 30b2131b5860..65cb2e5c5eee 100644 --- a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml +++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml @@ -16,7 +16,6 @@ properties: - enum: - atmel,at91rm9200-usart - atmel,at91sam9260-usart - - microchip,sam9x60-usart - items: - const: atmel,at91rm9200-dbgu - const: atmel,at91rm9200-usart @@ -24,6 +23,9 @@ properties: - const: atmel,at91sam9260-dbgu - const: atmel,at91sam9260-usart - items: + - const: microchip,sam9x60-usart + - const: atmel,at91sam9260-usart + - items: - const: microchip,sam9x60-dbgu - const: microchip,sam9x60-usart - const: atmel,at91sam9260-dbgu diff --git a/Documentation/devicetree/bindings/serial/cavium-uart.txt b/Documentation/devicetree/bindings/serial/cavium-uart.txt deleted file mode 100644 index 87a6c375cd44..000000000000 --- a/Documentation/devicetree/bindings/serial/cavium-uart.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Universal Asynchronous Receiver/Transmitter (UART) - -- compatible: "cavium,octeon-3860-uart" - - Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. - -- reg: The base address of the UART register bank. - -- interrupts: A single interrupt specifier. - -- current-speed: Optional, the current bit rate in bits per second. - -Example: - uart1: serial@1180000000c00 { - compatible = "cavium,octeon-3860-uart","ns16550"; - reg = <0x11800 0x00000c00 0x0 0x400>; - current-speed = <115200>; - interrupts = <0 35>; - }; diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt deleted file mode 100644 index f709304036c2..000000000000 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt +++ /dev/null @@ -1,73 +0,0 @@ -NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver. - -Required properties: -- compatible : should be, - "nvidia,tegra20-hsuart" for Tegra20, - "nvidia,tegra30-hsuart" for Tegra30, - "nvidia,tegra186-hsuart" for Tegra186, - "nvidia,tegra194-hsuart" for Tegra194. - -- reg: Should contain UART controller registers location and length. -- interrupts: Should contain UART controller interrupts. -- clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - serial -- dmas : Must contain an entry for each entry in dma-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Optional properties: -- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable - only if all 8 lines of UART controller are pinmuxed. -- nvidia,adjust-baud-rates: List of entries providing percentage of baud rate - adjustment within a range. - Each entry contains sets of 3 values. Range low/high and adjusted rate. - <range_low range_high adjusted_rate> - When baud rate set on controller falls within the range mentioned in this - field, baud rate will be adjusted by percentage mentioned here. - Ex: <9600 115200 200> - Increase baud rate by 2% when set baud rate falls within range 9600 to 115200 - -Baud Rate tolerance: - Standard UART devices are expected to have tolerance for baud rate error by - -4 to +4 %. All Tegra devices till Tegra210 had this support. However, - Tegra186 chip has a known hardware issue. UART Rx baud rate tolerance level - is 0% to +4% in 1-stop config. Otherwise, the received data will have - corruption/invalid framing errors. Parker errata suggests adjusting baud - rate to be higher than the deviations observed in Tx. - - Tx deviation of connected device can be captured over scope (or noted from - its spec) for valid range and Tegra baud rate has to be set above actual - Tx baud rate observed. To do this we use nvidia,adjust-baud-rates - - As an example, consider there is deviation observed in Tx for baud rates as - listed below. - 0 to 9600 has 1% deviation - 9600 to 115200 2% deviation - This slight deviation is expcted and Tegra UART is expected to handle it. Due - to the issue stated above, baud rate on Tegra UART should be set equal to or - above deviation observed for avoiding frame errors. - Property should be set like this - nvidia,adjust-baud-rates = <0 9600 100>, - <9600 115200 200>; - -Example: - -serial@70006000 { - compatible = "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart"; - reg = <0x70006000 0x40>; - reg-shift = <2>; - interrupts = <0 36 0x04>; - nvidia,enable-modem-interrupt; - clocks = <&tegra_car 6>; - resets = <&tegra_car 6>; - reset-names = "serial"; - dmas = <&apbdma 8>, <&apbdma 8>; - dma-names = "rx", "tx"; - nvidia,adjust-baud-rates = <1000000 4000000 136>; /* 1.36% shift */ -}; diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml new file mode 100644 index 000000000000..04d55fecf47c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/nvidia,tegra20-hsuart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-hsuart + - nvidia,tegra30-hsuart + - nvidia,tegra186-hsuart + - nvidia,tegra194-hsuart + - items: + - const: nvidia,tegra124-hsuart + - const: nvidia,tegra30-hsuart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: serial + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + nvidia,enable-modem-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Enable modem interrupts. Should be enable only if all 8 lines of UART controller + are pinmuxed. + + nvidia,adjust-baud-rates: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + List of entries providing percentage of baud rate adjustment within a range. Each entry + contains a set of 3 values: range low/high and adjusted rate. When the baud rate set on the + controller falls within the range mentioned in this field, the baud rate will be adjusted by + percentage mentioned here. + + Example: <9600 115200 200> + + Increase baud rate by 2% when set baud rate falls within range 9600 to 115200. + + Standard UART devices are expected to have tolerance for baud rate error by -4 to +4 %. All + Tegra devices till Tegra210 had this support. However, Tegra186 chip has a known hardware + issue. UART RX baud rate tolerance level is 0% to +4% in 1-stop config. Otherwise, the + received data will have corruption/invalid framing errors. Parker errata suggests adjusting + baud rate to be higher than the deviations observed in TX. + + TX deviation of connected device can be captured over scope (or noted from its spec) for + valid range and Tegra baud rate has to be set above actual TX baud rate observed. To do this + we use nvidia,adjust-baud-rates. + + As an example, consider there is deviation observed in TX for baud rates as listed below. 0 + to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expcted and + Tegra UART is expected to handle it. Due to the issue stated above, baud rate on Tegra UART + should be set equal to or above deviation observed for avoiding frame errors. Property + should be set like this: + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>; + items: + items: + - description: range lower bound + - description: range upper bound + - description: adjustment (in permyriad, i.e. 0.01%) + +allOf: + - $ref: serial.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra30-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + serial@70006000 { + compatible = "nvidia,tegra30-hsuart"; + reg = <0x70006000 0x40>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + nvidia,enable-modem-interrupt; + clocks = <&tegra_car TEGRA30_CLK_UARTA>; + resets = <&tegra_car 6>; + reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; + nvidia,adjust-baud-rates = <1000000 4000000 136>; /* 1.36% shift */ + }; diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt deleted file mode 100644 index 04e23e63ee4f..000000000000 --- a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt +++ /dev/null @@ -1,28 +0,0 @@ -* NXP LPC1850 UART - -Required properties: -- compatible : "nxp,lpc1850-uart", "ns16550a". -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clocks : phandle to the input clocks. -- clock-names : required elements: "uartclk", "reg". - -Optional properties: -- dmas : Two or more DMA channel specifiers following the - convention outlined in bindings/dma/dma.txt -- dma-names : Names for the dma channels, if present. There must - be at least one channel named "tx" for transmit - and named "rx" for receive. - -Since it's also possible to also use the of_serial.c driver all -parameters from 8250.txt also apply but are optional. - -Example: -uart0: serial@40081000 { - compatible = "nxp,lpc1850-uart", "ns16550a"; - reg = <0x40081000 0x1000>; - reg-shift = <2>; - interrupts = <24>; - clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; - clock-names = "uartclk", "reg"; -}; diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt index 75d877f5968f..a1b9b6f3490a 100644 --- a/Documentation/devicetree/bindings/serial/st-asc.txt +++ b/Documentation/devicetree/bindings/serial/st-asc.txt @@ -8,7 +8,7 @@ Required properties: Optional properties: - st,hw-flow-ctrl bool flag to enable hardware flow control. -- st,force-m1 bool flat to force asc to be in Mode-1 recommeded +- st,force-m1 bool flat to force asc to be in Mode-1 recommended for high bit rates (above 19.2K) Example: serial@fe440000{ diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml new file mode 100644 index 000000000000..16977e4e4357 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson System Control registers + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + items: + - enum: + - amlogic,meson-gx-hhi-sysctrl + - amlogic,meson-gx-ao-sysctrl + - amlogic,meson-axg-hhi-sysctrl + - amlogic,meson-axg-ao-sysctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + type: object + + power-controller: + $ref: /schemas/power/amlogic,meson-ee-pwrc.yaml + + pinctrl: + type: object + + phy: + type: object + +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-hhi-sysctrl + - amlogic,meson-axg-hhi-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,gxbb-clkc.yaml# + + required: + - power-controller + + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-ao-sysctrl + - amlogic,meson-axg-ao-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,gxbb-aoclkc.yaml# + + power-controller: false + phy: false + + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-hhi-sysctrl + then: + properties: + phy: false + + - if: + properties: + compatible: + enum: + - amlogic,meson-axg-hhi-sysctrl + then: + properties: + phy: + oneOf: + - $ref: /schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml + - $ref: /schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml + +required: + - compatible + - reg + - clock-controller + +additionalProperties: false + +examples: + - | + bus@c883c000 { + compatible = "simple-bus"; + reg = <0xc883c000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc883c000 0x2000>; + + sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; + reg = <0 0x400>; + + clock-controller { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + + power-controller { + compatible = "amlogic,meson-gxbb-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_bt656>, + <&reset_dvin>, + <&reset_rdma>, + <&reset_venci>, + <&reset_vencp>, + <&reset_vdac>, + <&reset_vdi6>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "bt656", "dvin", + "rdma", "venci", "vencp", "vdac", "vdi6", + "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; + }; + }; + }; + + bus@c8100000 { + compatible = "simple-bus"; + reg = <0xc8100000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8100000 0x100000>; + + sysctrl_AO: system-controller@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; + reg = <0 0x100>; + + clock-controller { + compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "mpeg-clk"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml index 6876407124dc..51aaf34acb32 100644 --- a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml +++ b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml @@ -3,8 +3,8 @@ # # Copyright (c) 2021 Aspeed Technology Inc. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Aspeed UART Routing Controller diff --git a/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml index 8634865015cd..ceb81646fe75 100644 --- a/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml +++ b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2022, Intel Corporation %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel HPS Copy Engine diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml index ecae9fa8561b..a64406ca17b5 100644 --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml @@ -2,8 +2,8 @@ # Copyright 2020 Antmicro <www.antmicro.com> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: LiteX SoC Controller driver diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml new file mode 100644 index 000000000000..da2dcfeebf12 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2 Power Manager controller + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +properties: + compatible: + items: + - enum: + - loongson,ls2k0500-pmc + - loongson,ls2k1000-pmc + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + loongson,suspend-address: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + The "loongson,suspend-address" is a deep sleep state (Suspend To + RAM) firmware entry address which was jumped from kernel and it's + value was dependent on specific platform firmware code. In + addition, the PM need according to it to indicate that current + SoC whether support Suspend To RAM. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + power-management@1fe27000 { + compatible = "loongson,ls2k1000-pmc", "syscon"; + reg = <0x1fe27000 0x58>; + interrupt-parent = <&liointc1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + loongson,suspend-address = <0x0 0x1c000500>; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml index 8e6ba2ec8a43..f0fa92b04b32 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -12,7 +12,7 @@ maintainers: description: The MediaTek wo-ccif provides a configuration interface for WED WO - controller used to perfrom offload rx packet processing (e.g. 802.11 + controller used to perform offload rx packet processing (e.g. 802.11 aggregation packet reordering or rx header translation) on MT7986 soc. properties: diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml index 04ffee3a7c59..365a9fed5914 100644 --- a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -12,7 +12,7 @@ maintainers: description: | PolarFire SoC devices include a microcontroller acting as the system controller, which provides "services" to the main processor and to the FPGA fabric. These - services include hardware rng, reprogramming of the FPGA and verfification of the + services include hardware rng, reprogramming of the FPGA and verification of the eNVM contents etc. More information on these services can be found online, at https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index 9dc8e48c8af4..d1c7c2be865f 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -77,7 +77,7 @@ patternProperties: description: The AOSS side channel also provides the controls for three cooling devices, these are expressed as subnodes of the QMP node. The name of the node is - used to identify the resource and must therefor be "cx", "mx" or "ebi". + used to identify the resource and must therefore be "cx", "mx" or "ebi". properties: "#cooling-cells": diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index 6440dc801387..bceb479f74c5 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -38,15 +38,9 @@ properties: patternProperties: '^connector@\d$': $ref: /schemas/connector/usb-connector.yaml# - - properties: - reg: true - required: - reg - unevaluatedProperties: false - required: - compatible diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index 65c02a7fef80..2fa725b8af5d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -34,22 +34,27 @@ properties: - qcom,rpm-apq8084 - qcom,rpm-ipq6018 - qcom,rpm-ipq9574 + - qcom,rpm-mdm9607 - qcom,rpm-msm8226 + - qcom,rpm-msm8610 - qcom,rpm-msm8909 - qcom,rpm-msm8916 + - qcom,rpm-msm8917 - qcom,rpm-msm8936 + - qcom,rpm-msm8937 + - qcom,rpm-msm8952 - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 - qcom,rpm-msm8994 - qcom,rpm-msm8996 - qcom,rpm-msm8998 + - qcom,rpm-qcm2290 + - qcom,rpm-qcs404 - qcom,rpm-sdm660 - qcom,rpm-sm6115 - qcom,rpm-sm6125 - qcom,rpm-sm6375 - - qcom,rpm-qcm2290 - - qcom,rpm-qcs404 clock-controller: $ref: /schemas/clock/qcom,rpmcc.yaml# @@ -81,12 +86,18 @@ if: contains: enum: - qcom,rpm-apq8084 + - qcom,rpm-mdm9607 - qcom,rpm-msm8226 + - qcom,rpm-msm8610 + - qcom,rpm-msm8909 - qcom,rpm-msm8916 + - qcom,rpm-msm8917 - qcom,rpm-msm8936 + - qcom,rpm-msm8937 + - qcom,rpm-msm8952 + - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 - - qcom,rpm-msm8953 - qcom,rpm-msm8994 then: properties: @@ -109,10 +120,10 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> - smd { - compatible = "qcom,smd"; + remoteproc { + compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; - rpm { + smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml index 063e595c12f7..4819ce90d206 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml @@ -15,6 +15,12 @@ description: The Qualcomm Shared Memory Driver is a FIFO based communication channel for sending data between the various subsystems in Qualcomm platforms. + Using the top-level SMD node is deprecated. Instead, the SMD edges are defined + directly below the device node representing the respective remote subsystem + or remote processor. + +deprecated: true + properties: compatible: const: qcom,smd @@ -37,6 +43,7 @@ examples: # The following example represents a smd node, with one edge representing the # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the # "rpm_request" channel. + # NOTE: This is deprecated, represent the RPM using "qcom,rpm-proc" instead. - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml index 398663d21ab1..e52e176d8cb3 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas RZ/{G2L,V2L} System Controller (SYSC) diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml new file mode 100644 index 000000000000..0039319e91fe --- /dev/null +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 SoC system controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The StarFive JH7110 SoC system controller provides register information such + as offset, mask and shift to configure related modules such as MMC and PCIe. + +properties: + compatible: + oneOf: + - items: + - const: starfive,jh7110-sys-syscon + - const: syscon + - const: simple-mfd + - items: + - enum: + - starfive,jh7110-aon-syscon + - starfive,jh7110-stg-syscon + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/starfive,jh7110-pll.yaml# + type: object + + "#power-domain-cells": + const: 1 + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: starfive,jh7110-sys-syscon + then: + required: + - clock-controller + else: + properties: + clock-controller: false + - if: + properties: + compatible: + contains: + const: starfive,jh7110-aon-syscon + then: + required: + - "#power-domain-cells" + else: + properties: + "#power-domain-cells": false + +additionalProperties: false + +examples: + - | + syscon@10240000 { + compatible = "starfive,jh7110-stg-syscon", "syscon"; + reg = <0x10240000 0x1000>; + }; + + syscon@13030000 { + compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd"; + reg = <0x13030000 0x1000>; + + clock-controller { + compatible = "starfive,jh7110-pll"; + clocks = <&osc>; + #clock-cells = <1>; + }; + }; + + syscon@17010000 { + compatible = "starfive,jh7110-aon-syscon", "syscon"; + reg = <0x17010000 0x1000>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml new file mode 100644 index 000000000000..d5261ce3a619 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,nvec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA compliant embedded controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,nvec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: divider clock + - description: fast clock + + clock-names: + minItems: 1 + items: + - const: div-clk + - const: fast-clk + + resets: + items: + - description: module reset + + reset-names: + items: + - const: i2c + + clock-frequency: true + + request-gpios: + description: phandle to the GPIO used for EC request + + slave-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: I2C address of the slave controller + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - clock-frequency + - request-gpios + - slave-addr + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@7000c500 { + compatible = "nvidia,nvec"; + reg = <0x7000c500 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <80000>; + request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + slave-addr = <138>; + clocks = <&tegra_car TEGRA20_CLK_I2C3>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + }; diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml new file mode 100644 index 000000000000..2f7269a26b8e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-ahb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +title: NVIDIA Tegra AHB + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-ahb + - nvidia,tegra30-ahb + - items: + - enum: + - nvidia,tegra114-ahb + - nvidia,tegra124-ahb + - nvidia,tegra210-ahb + - const: nvidia,tegra30-ahb + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + ahb@6000c004 { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml new file mode 100644 index 000000000000..705544b7f98f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-flowctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Flow Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-flowctrl + - nvidia,tegra30-flowctrl + - nvidia,tegra114-flowctrl + - nvidia,tegra124-flowctrl + - nvidia,tegra210-flowctrl + + - items: + - const: nvidia,tegra132-flowctrl + - const: nvidia,tegra124-flowctrl + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml index 22cf9002fee7..158186610c53 100644 --- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml +++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 NavigatorSS Ring Accelerator @@ -34,18 +34,22 @@ properties: - const: ti,am654-navss-ringacc reg: + minItems: 4 items: - description: real time registers regions - description: fifos registers regions - description: proxy gcfg registers regions - description: proxy target registers regions + - description: configuration registers region reg-names: + minItems: 4 items: - const: rt - const: fifos - const: proxy_gcfg - const: proxy_target + - const: cfg msi-parent: true @@ -80,8 +84,9 @@ examples: reg = <0x0 0x3c000000 0x0 0x400000>, <0x0 0x38000000 0x0 0x400000>, <0x0 0x31120000 0x0 0x100>, - <0x0 0x33000000 0x0 0x40000>; - reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + <0x0 0x33000000 0x0 0x40000>, + <0x0 0x31080000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; ti,num-rings = <818>; ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ ti,sci = <&dmsc>; diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml index 5df7688a1e1c..a750035d6234 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml# diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml index bf1234550343..5db718e4d0e7 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml @@ -9,6 +9,9 @@ title: Amlogic AXG sound card maintainers: - Jerome Brunet <jbrunet@baylibre.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: const: amlogic,axg-sound-card @@ -17,23 +20,12 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: list of auxiliary devices - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - audio-widgets: $ref: /schemas/types.yaml#/definitions/non-unique-string-array description: A list off component DAPM widget. Each entry is a pair of strings, the first being the widget type, the second being the widget name - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - patternProperties: "^dai-link-[0-9]+$": type: object @@ -108,7 +100,6 @@ patternProperties: - sound-dai required: - - model - dai-link-0 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index b358fd601ed3..d4277d342e69 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -9,6 +9,9 @@ title: Amlogic GX sound card maintainers: - Jerome Brunet <jbrunet@baylibre.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: items: @@ -18,14 +21,6 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: list of auxiliary devices - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - minItems: 2 - description: |- - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - audio-widgets: $ref: /schemas/types.yaml#/definitions/non-unique-string-array minItems: 2 @@ -33,10 +28,6 @@ properties: A list off component DAPM widget. Each entry is a pair of strings, the first being the widget type, the second being the widget name - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - patternProperties: "^dai-link-[0-9]+$": type: object @@ -86,7 +77,7 @@ required: - model - dai-link-0 -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml index 3de7b36829da..d3ce4de449d5 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -39,22 +39,4 @@ required: additionalProperties: false -examples: - - | - sound { - compatible = "audio-graph-card2"; - - links = <&cpu_port>; - }; - - cpu { - compatible = "cpu-driver"; - - cpu_port: port { cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; }; - }; - - codec { - compatible = "codec-driver"; - - port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; }; - }; +... diff --git a/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml b/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml new file mode 100644 index 000000000000..d3cc1ea4a175 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/audio-iio-aux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio IIO auxiliary + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + Auxiliary device based on Industrial I/O device channels + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: audio-iio-aux + + io-channels: + description: + Industrial I/O device channels used + + io-channel-names: + description: + Industrial I/O channel names related to io-channels. + These names are used to provides sound controls, widgets and routes names. + + snd-control-invert-range: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + A list of 0/1 flags defining whether or not the related channel is + inverted + items: + enum: [0, 1] + default: 0 + description: | + Invert the sound control value compared to the IIO channel raw value. + - 1: The related sound control value is inverted meaning that the + minimum sound control value correspond to the maximum IIO channel + raw value and the maximum sound control value correspond to the + minimum IIO channel raw value. + - 0: The related sound control value is not inverted meaning that the + minimum (resp maximum) sound control value correspond to the + minimum (resp maximum) IIO channel raw value. + +required: + - compatible + - io-channels + - io-channel-names + +unevaluatedProperties: false + +examples: + - | + iio-aux { + compatible = "audio-iio-aux"; + io-channels = <&iio 0>, <&iio 1>, <&iio 2>, <&iio 3>; + io-channel-names = "CH0", "CH1", "CH2", "CH3"; + /* Invert CH1 and CH2 */ + snd-control-invert-range = <0 1 1 0>; + }; diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml index 35eef7d818a2..4051c2538caf 100644 --- a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml +++ b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml @@ -19,7 +19,9 @@ allOf: properties: compatible: - const: awinic,aw88395 + enum: + - awinic,aw88395 + - awinic,aw88261 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt index 9d049d4bfd58..b6cc5f6f78c2 100644 --- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt +++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt @@ -29,7 +29,7 @@ The schematics explaining the gpios are as follows: IN2 +---o--+------------+--o---+ OUT2 loop2 relays -The 'loop1' gpio pin controlls two relays, which are either in loop position, +The 'loop1' gpio pin controls two relays, which are either in loop position, meaning that input and output are directly connected, or they are in mixer position, meaning that the signal is passed through the 'Sum' mixer. Similarly for 'loop2'. diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml new file mode 100644 index 000000000000..7a6de938b11d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml @@ -0,0 +1,313 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42L43 Audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +description: | + The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface + (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed + for portable applications. It provides a high dynamic range, stereo + DAC for headphone output, two integrated Class D amplifiers for + loudspeakers, and two ADCs for wired headset microphone input or + stereo line input. PDM inputs are provided for digital microphones. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - cirrus,cs42l43 + + reg: + maxItems: 1 + + vdd-p-supply: + description: + Power supply for the high voltage interface. + + vdd-a-supply: + description: + Power supply for internal analog circuits. + + vdd-d-supply: + description: + Power supply for internal digital circuits. Can be internally supplied. + + vdd-io-supply: + description: + Power supply for external interface and internal digital logic. + + vdd-cp-supply: + description: + Power supply for the amplifier 3 and 4 charge pump. + + vdd-amp-supply: + description: + Power supply for amplifier 1 and 2. + + reset-gpios: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + clocks: + items: + - description: Synchronous audio clock provided on mclk_in. + + clock-names: + const: mclk + + cirrus,bias-low: + type: boolean + description: + Select a 1.8V headset micbias rather than 2.8V. + + cirrus,bias-sense-microamp: + description: + Current at which the headset micbias sense clamp will engage, 0 to + disable. + enum: [ 0, 14, 23, 41, 50, 60, 68, 86, 95 ] + default: 0 + + cirrus,bias-ramp-ms: + description: + Time in milliseconds the hardware allows for the headset micbias to + ramp up. + enum: [ 10, 40, 90, 170 ] + default: 170 + + cirrus,detect-us: + description: + Time in microseconds the type detection will run for. Long values will + cause more audible effects, but give more accurate detection. + enum: [ 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 ] + default: 10000 + + cirrus,button-automute: + type: boolean + description: + Enable the hardware automuting of decimator 1 when a headset button is + pressed. + + cirrus,buttons-ohms: + description: + Impedance in Ohms for each headset button, these should be listed in + ascending order. + minItems: 1 + maxItems: 6 + + cirrus,tip-debounce-ms: + description: + Software debounce on tip sense triggering in milliseconds. + default: 0 + + cirrus,tip-invert: + type: boolean + description: + Indicates tip detect polarity, inverted implies open-circuit whilst the + jack is inserted. + + cirrus,tip-disable-pullup: + type: boolean + description: + Indicates if the internal pullup on the tip detect should be disabled. + + cirrus,tip-fall-db-ms: + description: + Time in milliseconds a falling edge on the tip detect should be hardware + debounced for. Note the falling edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,tip-rise-db-ms: + description: + Time in milliseconds a rising edge on the tip detect should be hardware + debounced for. Note the rising edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,use-ring-sense: + type: boolean + description: + Indicates if the ring sense should be used. + + cirrus,ring-invert: + type: boolean + description: + Indicates ring detect polarity, inverted implies open-circuit whilst the + jack is inserted. + + cirrus,ring-disable-pullup: + type: boolean + description: + Indicates if the internal pullup on the ring detect should be disabled. + + cirrus,ring-fall-db-ms: + description: + Time in milliseconds a falling edge on the ring detect should be hardware + debounced for. Note the falling edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,ring-rise-db-ms: + description: + Time in milliseconds a rising edge on the ring detect should be hardware + debounced for. Note the rising edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + pinctrl: + type: object + $ref: /schemas/pinctrl/pinctrl.yaml# + additionalProperties: false + + properties: + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + items: + - description: A phandle to the CODEC pinctrl node + minimum: 0 + - const: 0 + - const: 0 + - const: 3 + + patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/cirrus-cs42l43-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/cirrus-cs42l43-state" + additionalProperties: false + + spi: + type: object + $ref: /schemas/spi/spi-controller.yaml# + unevaluatedProperties: false + +$defs: + cirrus-cs42l43-state: + type: object + + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + properties: + groups: + enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ] + + pins: + enum: [ gpio1, gpio2, gpio3, + asp_dout, asp_fsync, asp_bclk, + pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data, + i2c_sda, i2c_scl, + spi_miso, spi_sck, spi_ssb ] + + function: + enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ] + + drive-strength: + description: Set drive strength in mA + enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ] + + input-debounce: + description: Set input debounce in uS + enum: [ 0, 85 ] + +required: + - compatible + - reg + - vdd-p-supply + - vdd-a-supply + - vdd-io-supply + - vdd-cp-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cs42l43: codec@1a { + compatible = "cirrus,cs42l43"; + reg = <0x1a>; + + vdd-p-supply = <&vdd5v0>; + vdd-a-supply = <&vdd1v8>; + vdd-io-supply = <&vdd1v8>; + vdd-cp-supply = <&vdd1v8>; + vdd-amp-supply = <&vdd5v0>; + + reset-gpios = <&gpio 0>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + #sound-dai-cells = <1>; + + clocks = <&clks 0>; + clock-names = "mclk"; + + cs42l43_pins: pinctrl { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cs42l43_pins 0 0 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: default-state { + shutter-pins { + groups = "gpio3"; + function = "mic-shutter"; + }; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&cs42l43_pins 1 0>; + + sensor@0 { + compatible = "bosch,bme680"; + reg = <0>; + spi-max-frequency = <1400000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt index 7915897f8a81..e84f30c5c39b 100644 --- a/Documentation/devicetree/bindings/sound/cs35l35.txt +++ b/Documentation/devicetree/bindings/sound/cs35l35.txt @@ -110,7 +110,7 @@ Optional Monitor Signal Format sub-node: See Sections 4.8.2 through 4.8.4 Serial-Port Control in the Datasheet - -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formating + -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formatting on the I2S Port. Each of the 3 8 bit values in the array contain the settings for depth, location, and frame. diff --git a/Documentation/devicetree/bindings/sound/cs35l36.txt b/Documentation/devicetree/bindings/sound/cs35l36.txt index 912bd162b477..d34117b8558e 100644 --- a/Documentation/devicetree/bindings/sound/cs35l36.txt +++ b/Documentation/devicetree/bindings/sound/cs35l36.txt @@ -33,7 +33,7 @@ Optional properties: one amplifier in the system. If more than one it is best to Hi-Z the ASP port to prevent bus contention on the output signal - - cirrus,boost-ctl-select : Boost conerter control source selection. + - cirrus,boost-ctl-select : Boost converter control source selection. Selects the source of the BST_CTL target VBST voltage for the boost converter to generate. 0x00 - Control Port Value diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt index 4dbfb8274cd9..dc256adb35a2 100644 --- a/Documentation/devicetree/bindings/sound/cs53l30.txt +++ b/Documentation/devicetree/bindings/sound/cs53l30.txt @@ -30,7 +30,7 @@ Optional properties: * frame using two different ways: * 1) Normal I2S mode on two data pins -- each SDOUT * carries 2-channel data in the same time. - * 2) TDM mode on one signle data pin -- SDOUT1 carries + * 2) TDM mode on one single data pin -- SDOUT1 carries * 4-channel data per frame. Example: diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml index bb5af48ab1e1..eb7d219e2c86 100644 --- a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml +++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml @@ -74,7 +74,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 dlg,mic-amp-in-sel: - enum: ["diff", "se_p", "se_n"] + enum: [diff, se_p, se_n] description: Mic input source type. @@ -123,7 +123,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 dlg,jack-ins-det-pty: - enum: ["low", "high"] + enum: [low, high] description: Polarity for jack insertion detection. $ref: /schemas/types.yaml#/definitions/string diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index 0a2480aeecf0..90112ca1ff42 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -44,7 +44,7 @@ Required properties: - fsl,esai-synchronous: This is a boolean property. If present, indicating that ESAI would work in the synchronous mode, which means all the settings for Receiving would be - duplicated from Transmition related registers. + duplicated from Transmission related registers. Optional properties: diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml index e847611a85f7..188f38baddec 100644 --- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -17,6 +17,9 @@ description: | such as SAI, MICFIL, .etc through building rpmsg channels between Cortex-A and Cortex-M. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: @@ -25,10 +28,7 @@ properties: - fsl,imx8mm-rpmsg-audio - fsl,imx8mp-rpmsg-audio - fsl,imx8ulp-rpmsg-audio - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name + - fsl,imx93-rpmsg-audio clocks: items: @@ -65,13 +65,6 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle to a node of audio codec - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: | - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - fsl,enable-lpa: $ref: /schemas/types.yaml#/definitions/flag description: enable low power audio path. @@ -100,9 +93,8 @@ properties: required: - compatible - - model -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml index 666a95ac22c8..bac940553965 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -7,29 +7,21 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Google SC7180-Trogdor ASoC sound card driver maintainers: - - Rohit kumar <rohitkr@codeaurora.org> + - Rohit kumar <quic_rohkumar@quicinc.com> - Cheng-Yi Chiang <cychiang@chromium.org> description: This binding describes the SC7180 sound card which uses LPASS for audio. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - google,sc7180-trogdor - google,sc7180-coachz - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - "#address-cells": const: 1 @@ -86,11 +78,10 @@ patternProperties: required: - compatible - - model - "#address-cells" - "#size-cells" -additionalProperties: false +unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml index 0b1a01a4c14e..ec4b6e547ca6 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml @@ -13,22 +13,14 @@ maintainers: description: This binding describes the SC7280 sound card which uses LPASS for audio. +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - google,sc7280-herobrine - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. - - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - "#address-cells": const: 1 @@ -97,11 +89,10 @@ patternProperties: required: - compatible - - model - "#address-cells" - "#size-cells" -additionalProperties: false +unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/sound/gtm601.txt b/Documentation/devicetree/bindings/sound/gtm601.txt deleted file mode 100644 index efa32a486c4a..000000000000 --- a/Documentation/devicetree/bindings/sound/gtm601.txt +++ /dev/null @@ -1,19 +0,0 @@ -GTM601 UMTS modem audio interface CODEC - -This device has no configuration interface. The sample rate and channels are -based on the compatible string - "option,gtm601" = 8kHz mono - "broadmobi,bm818" = 48KHz stereo - -Required properties: - - - compatible : one of - "option,gtm601" - "broadmobi,bm818" - - -Example: - -codec: gtm601_codec { - compatible = "option,gtm601"; -}; diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml index b6f5d486600e..f7ad5ea2491e 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml +++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml @@ -9,23 +9,14 @@ title: NXP i.MX audio sound card. maintainers: - Shengjiu Wang <shengjiu.wang@nxp.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - fsl,imx-audio-card - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - description: - A list of the connections between audio components. Each entry is a - pair of strings, the first being the connection's sink, the second - being the connection's source. Valid names could be power supplies, - MicBias of codec and the jacks on the board. - patternProperties: ".*-dai-link$": description: @@ -84,9 +75,8 @@ patternProperties: required: - compatible - - model -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/max9892x.txt b/Documentation/devicetree/bindings/sound/max9892x.txt deleted file mode 100644 index 98cb9ba5b328..000000000000 --- a/Documentation/devicetree/bindings/sound/max9892x.txt +++ /dev/null @@ -1,44 +0,0 @@ -Maxim Integrated MAX98925/MAX98926/MAX98927 Speaker Amplifier - -This device supports I2C. - -Required properties: - - - compatible : should be one of the following - - "maxim,max98925" - - "maxim,max98926" - - "maxim,max98927" - - - vmon-slot-no : slot number used to send voltage information - or in inteleave mode this will be used as - interleave slot. - MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0 - MAX98927 slot range : 0 ~ 15, Default : 0 - - - imon-slot-no : slot number used to send current information - MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0 - MAX98927 slot range : 0 ~ 15, Default : 0 - - - interleave-mode : When using two MAX9892X in a system it is - possible to create ADC data that that will - overflow the frame size. Digital Audio Interleave - mode provides a means to output VMON and IMON data - from two devices on a single DOUT line when running - smaller frames sizes such as 32 BCLKS per LRCLK or - 48 BCLKS per LRCLK. - Range : 0 (off), 1 (on), Default : 0 - - - reg : the I2C address of the device for I2C - -Optional properties: - - reset-gpios : GPIO to reset the device - -Example: - -codec: max98927@3a { - compatible = "maxim,max98927"; - vmon-slot-no = <0>; - imon-slot-no = <1>; - interleave-mode = <0>; - reg = <0x3a>; -}; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98925.yaml b/Documentation/devicetree/bindings/sound/maxim,max98925.yaml new file mode 100644 index 000000000000..32fd86204a7a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98925.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98925.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98925/MAX98926/MAX98927 speaker amplifier + +maintainers: + - Ryan Lee <ryans.lee@maximintegrated.com> + +properties: + compatible: + enum: + - maxim,max98925 + - maxim,max98926 + - maxim,max98927 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 30 + default: 0 + description: + Slot number used to send voltage information or in inteleave mode this + will be used as interleave slot. + + imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 30 + default: 0 + description: + Slot number used to send current information. + + maxim,interleave-mode: + type: boolean + description: + When using two MAX9892X in a system it is possible to create ADC data + that will overflow the frame size. When enabled, the Digital Audio + Interleave mode provides a means to output VMON and IMON data from two + devices on a single DOUT line when running smaller frames sizes such as + 32 BCLKS per LRCLK or 48 BCLKS per LRCLK. + +required: + - compatible + - reg + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - maxim,max98927 + then: + properties: + vmon-slot-no: + minimum: 0 + maximum: 15 + + imon-slot-no: + minimum: 0 + maximum: 15 + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + #include <dt-bindings/gpio/gpio.h> + audio-codec@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + #sound-dai-cells = <0>; + + pinctrl-0 = <&speaker_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml new file mode 100644 index 000000000000..398efdfe00f5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt7986-afe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek AFE PCM controller for MT7986 + +maintainers: + - Maso Huang <maso.huang@mediatek.com> + +properties: + compatible: + oneOf: + - const: mediatek,mt7986-afe + - items: + - enum: + - mediatek,mt7981-afe + - mediatek,mt7988-afe + - const: mediatek,mt7986-afe + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 5 + items: + - description: audio bus clock + - description: audio 26M clock + - description: audio intbus clock + - description: audio hopping clock + - description: audio pll clock + - description: mux for pcm_mck + - description: audio i2s/pcm mck + + clock-names: + minItems: 5 + items: + - const: bus_ck + - const: 26m_ck + - const: l_ck + - const: aud_ck + - const: eg2_ck + - const: sel + - const: i2s_m + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt7986-afe + then: + properties: + clocks: + items: + - description: audio bus clock + - description: audio 26M clock + - description: audio intbus clock + - description: audio hopping clock + - description: audio pll clock + clock-names: + items: + - const: bus_ck + - const: 26m_ck + - const: l_ck + - const: aud_ck + - const: eg2_ck + + - if: + properties: + compatible: + contains: + const: mediatek,mt7981-afe + then: + properties: + clocks: + items: + - description: audio bus clock + - description: audio 26M clock + - description: audio intbus clock + - description: audio hopping clock + - description: audio pll clock + - description: mux for pcm_mck + clock-names: + items: + - const: bus_ck + - const: 26m_ck + - const: l_ck + - const: aud_ck + - const: eg2_ck + - const: sel + + - if: + properties: + compatible: + contains: + const: mediatek,mt7988-afe + then: + properties: + clocks: + items: + - description: audio bus clock + - description: audio 26M clock + - description: audio intbus clock + - description: audio hopping clock + - description: audio pll clock + - description: mux for pcm_mck + - description: audio i2s/pcm mck + clock-names: + items: + - const: bus_ck + - const: 26m_ck + - const: l_ck + - const: aud_ck + - const: eg2_ck + - const: sel + - const: i2s_m + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7986-clk.h> + + afe@11210000 { + compatible = "mediatek,mt7986-afe"; + reg = <0x11210000 0x9000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg_ao CLK_INFRA_AUD_BUS_CK>, + <&infracfg_ao CLK_INFRA_AUD_26M_CK>, + <&infracfg_ao CLK_INFRA_AUD_L_CK>, + <&infracfg_ao CLK_INFRA_AUD_AUD_CK>, + <&infracfg_ao CLK_INFRA_AUD_EG2_CK>; + clock-names = "bus_ck", + "26m_ck", + "l_ck", + "aud_ck", + "eg2_ck"; + assigned-clocks = <&topckgen CLK_TOP_A1SYS_SEL>, + <&topckgen CLK_TOP_AUD_L_SEL>, + <&topckgen CLK_TOP_A_TUNER_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_APLL2_D4>, + <&apmixedsys CLK_APMIXED_APLL2>, + <&topckgen CLK_TOP_APLL2_D4>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml new file mode 100644 index 000000000000..09247ceea3f7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt7986-wm8960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7986 sound card with WM8960 codec + +maintainers: + - Maso Huang <maso.huang@mediatek.com> + +allOf: + - $ref: sound-card-common.yaml# + +properties: + compatible: + const: mediatek,mt7986-wm8960-sound + + platform: + type: object + additionalProperties: false + properties: + sound-dai: + description: The phandle of MT7986 platform. + maxItems: 1 + required: + - sound-dai + + codec: + type: object + additionalProperties: false + properties: + sound-dai: + description: The phandle of wm8960 codec. + maxItems: 1 + required: + - sound-dai + +unevaluatedProperties: false + +required: + - compatible + - audio-routing + - platform + - codec + +examples: + - | + sound { + compatible = "mediatek,mt7986-wm8960-sound"; + model = "mt7986-wm8960"; + audio-routing = + "Headphone", "HP_L", + "Headphone", "HP_R", + "LINPUT1", "AMIC", + "RINPUT1", "AMIC"; + + platform { + sound-dai = <&afe>; + }; + + codec { + sound-dai = <&wm8960>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml index e6cb711ece77..90520f89208b 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml @@ -25,6 +25,12 @@ properties: reset-names: const: audiosys + memory-region: + maxItems: 1 + description: | + Shared memory region for AFE memif. A "shared-dma-pool". + See ../reserved-memory/reserved-memory.yaml for details. + mediatek,topckgen: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek topckgen controller @@ -135,7 +141,7 @@ patternProperties: maxItems: 16 description: This is a list of channel IDs which should be disabled. - By default, all data received from ETDM pins will be outputed to + By default, all data received from ETDM pins will be outputted to memory. etdm in supports disable_out in direct mode(w/o interconn), so user can disable the specified channels by the property. uniqueItems: true @@ -176,6 +182,7 @@ examples: interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>; resets = <&watchdog 14>; reset-names = "audiosys"; + memory-region = <&snd_dma_mem_reserved>; mediatek,topckgen = <&topckgen>; mediatek,infracfg = <&infracfg_ao>; power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml index 05e532b5d50a..43b3b67bdf3b 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml @@ -9,23 +9,19 @@ title: MediaTek MT8188 ASoC sound card maintainers: - Trevor Wu <trevor.wu@mediatek.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: - mediatek,mt8188-mt6359-evb - mediatek,mt8188-nau8825 - model: - $ref: /schemas/types.yaml#/definitions/string - description: User specified audio sound card name - audio-routing: - $ref: /schemas/types.yaml#/definitions/non-unique-string-array description: - A list of the connections between audio components. Each entry is a - sink/source pair of strings. Valid names could be the input or output - widgets of audio components, power supplies, MicBias of codec and the - software switch. + Valid names could be the input or output widgets of audio components, + power supplies, MicBias of codec and the software switch. mediatek,platform: $ref: /schemas/types.yaml#/definitions/phandle @@ -86,7 +82,7 @@ patternProperties: required: - link-name -additionalProperties: false +unevaluatedProperties: false required: - compatible @@ -96,6 +92,7 @@ examples: - | sound { compatible = "mediatek,mt8188-mt6359-evb"; + model = "MT6359-EVB"; mediatek,platform = <&afe>; pinctrl-names = "default"; pinctrl-0 = <&aud_pins_default>; diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 560762e0a168..f548e6a58240 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -1,7 +1,7 @@ Mediatek AFE PCM controller for mt2701 Required properties: -- compatible: should be one of the followings. +- compatible: should be one of the following. - "mediatek,mt2701-audio" - "mediatek,mt7622-audio" - interrupts: should contain AFE and ASYS interrupts diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml index d5adf07d46e0..5c8dba2b3a81 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml @@ -111,7 +111,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 description: | etdm modules can share the same external clock pin. Specify - which etdm clock source is required by this etdm in moudule. + which etdm clock source is required by this etdm in module. enum: - 0 # etdm1_in - 1 # etdm2_in @@ -122,7 +122,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 description: | etdm modules can share the same external clock pin. Specify - which etdm clock source is required by this etdm out moudule. + which etdm clock source is required by this etdm out module. enum: - 0 # etdm1_in - 1 # etdm2_in diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt deleted file mode 100644 index 7c84e7c7327a..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8821.txt +++ /dev/null @@ -1,55 +0,0 @@ -Nuvoton NAU88L21 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8821" - - - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1). - -Optional properties: - - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. - - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, - otherwise pin in high impedance state. - - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock. - - nuvoton,key_enable: Headset button detection switch. - -Example: - - headset: nau8821@1b { - compatible = "nuvoton,nau8821"; - reg = <0x1b>; - interrupt-parent = <&gpio>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - nuvoton,jkdet-enable; - nuvoton,jkdet-pull-enable; - nuvoton,jkdet-pull-up; - nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - nuvoton,jack-insert-debounce = <7>; - nuvoton,jack-eject-debounce = <7>; - nuvoton,dmic-clk-threshold = 3072000; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml new file mode 100644 index 000000000000..3e54abd4ca74 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU88L21 audio codec + +maintainers: + - Seven Lee <wtli@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8821 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-enable: + description: Enable jack detection via JKDET pin. + type: boolean + + nuvoton,jkdet-pull-enable: + description: Enable JKDET pin pull. If set - pin pull enabled, + otherwise pin in high impedance state. + type: boolean + + nuvoton,jkdet-pull-up: + description: Pull-up JKDET pin. If set then JKDET pin is pull up, + otherwise pull down. + type: boolean + + nuvoton,key-enable: + description: handles key press detection. + type: boolean + + nuvoton,jkdet-polarity: + description: JKDET pin polarity. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,micbias-voltage: + description: MICBIAS output level select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # VDDA + - 1 # VDDA * 1 + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,vref-impedance: + description: VMID Tie-off impedance select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # open + - 1 # 25KOhms + - 2 # 125KOhms + - 3 # 2.5KOhms + default: 2 + + nuvoton,jack-insert-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 7 + + nuvoton,jack-eject-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + + nuvoton,dmic-clk-threshold: + description: DMIC clock speed expected value. Unit is Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3072000 + + nuvoton,left-input-single-end: + description: Enable left input with single-ended settings if set. + For the headset mic application, the single-ended control is + just limited to the left adc for design demand. + type: boolean + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1b { + compatible = "nuvoton,nau8821"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,key-enable; + nuvoton,left-input-single-end; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,micbias-voltage = <6>; + nuvoton,vref-impedance = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <0>; + nuvoton,dmic-clk-threshold = <3072000>; + #sound-dai-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml index 65105402a53d..cb8182bbc491 100644 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml @@ -21,6 +21,15 @@ properties: reg: maxItems: 1 + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + nuvoton,spk-btl: description: If set, configure the two loudspeaker outputs as a Bridge Tied Load output @@ -31,6 +40,9 @@ required: - compatible - reg +allOf: + - $ref: dai-common.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml index fc89dbd6bf24..c29d7942915c 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml @@ -35,12 +35,12 @@ properties: items: enum: # Board Connectors - - "Int Spk" - - "Headphone Jack" - - "Earpiece" - - "Headset Mic" - - "Internal Mic 1" - - "Internal Mic 2" + - Int Spk + - Headphone Jack + - Earpiece + - Headset Mic + - Internal Mic 1 + - Internal Mic 2 # CODEC Pins - HPL diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml index a04487002e88..0c8067c3b056 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml @@ -31,10 +31,10 @@ properties: items: enum: # Board Connectors - - "Int Spk" - - "Headphone Jack" - - "Mic Jack" - - "Int Mic" + - Int Spk + - Headphone Jack + - Mic Jack + - Int Mic # CODEC Pins - MIC1 diff --git a/Documentation/devicetree/bindings/sound/option,gtm601.yaml b/Documentation/devicetree/bindings/sound/option,gtm601.yaml new file mode 100644 index 000000000000..ff813d97fc59 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/option,gtm601.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/option,gtm601.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GTM601 UMTS modem audio interface CODEC + +maintainers: + - kernel@puri.sm + +description: > + This device has no configuration interface. The sample rate and channels are + based on the compatible string + +properties: + compatible: + oneOf: + - description: Broadmobi BM818 (48Khz stereo) + items: + - const: broadmobi,bm818 + - const: option,gtm601 + - description: GTM601 (8kHz mono) + const: option,gtm601 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + +allOf: + - $ref: dai-common.yaml# + +additionalProperties: false + +examples: + - | + codec { + compatible = "option,gtm601"; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index 6cc8f86c7531..3a559bd07a79 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -8,7 +8,7 @@ title: Qualcomm Technologies Inc. LPASS CPU dai driver maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> - - Rohit kumar <rohitkr@codeaurora.org> + - Rohit kumar <quic_rohkumar@quicinc.com> description: | Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt deleted file mode 100644 index e7d17dda55db..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt +++ /dev/null @@ -1,101 +0,0 @@ -msm8916 analog audio CODEC - -Bindings for codec Analog IP which is integrated in pmic pm8916, - -## Bindings for codec core on pmic: - -Required properties - - compatible = "qcom,pm8916-wcd-analog-codec"; - - reg: represents the slave base address provided to the peripheral. - - interrupts: List of interrupts in given SPMI peripheral. - - interrupt-names: Names specified to above list of interrupts in same - order. List of supported interrupt names are: - "cdc_spk_cnp_int" - Speaker click and pop interrupt. - "cdc_spk_clip_int" - Speaker clip interrupt. - "cdc_spk_ocp_int" - Speaker over current protect interrupt. - "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1. - "mbhc_but_rel_det" - button release interrupt. - "mbhc_but_press_det" - button press event - "mbhc_ins_rem_det" - jack insert removal detect interrupt. - "mbhc_switch_int" - multi button headset interrupt. - "cdc_ear_ocp_int" - Earphone over current protect interrupt. - "cdc_hphr_ocp_int" - Headphone R over current protect interrupt. - "cdc_hphl_ocp_det" - Headphone L over current protect interrupt. - "cdc_ear_cnp_int" - earphone cnp interrupt. - "cdc_hphr_cnp_int" - hphr click and pop interrupt. - "cdc_hphl_cnp_int" - hphl click and pop interrupt. - - - clocks: Handle to mclk. - - clock-names: should be "mclk" - - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. - -Optional Properties: - - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons - detection on headset when the mbhc is powered up - by internal current source, this is a low power. - - qcom,mbhc-vthreshold-high: Array of 5 thresold voltages in mV for 5 buttons - detection on headset when mbhc is powered up - from micbias. -- qcom,micbias-lvl: Voltage (mV) for Mic Bias -- qcom,hphl-jack-type-normally-open: boolean, present if hphl pin on jack is a - NO (Normally Open). If not specified, then - its assumed that hphl pin on jack is NC - (Normally Closed). -- qcom,gnd-jack-type-normally-open: boolean, present if gnd pin on jack is - NO (Normally Open). If not specified, then - its assumed that gnd pin on jack is NC - (Normally Closed). -- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor - connected. -- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor - connected. - -Example: - -spmi_bus { - ... - audio-codec@f000{ - compatible = "qcom,pm8916-wcd-analog-codec"; - reg = <0xf000 0x200>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; - interrupt-parent = <&spmi_bus>; - interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, - <0x1 0xf0 0x1 IRQ_TYPE_NONE>, - <0x1 0xf0 0x2 IRQ_TYPE_NONE>, - <0x1 0xf0 0x3 IRQ_TYPE_NONE>, - <0x1 0xf0 0x4 IRQ_TYPE_NONE>, - <0x1 0xf0 0x5 IRQ_TYPE_NONE>, - <0x1 0xf0 0x6 IRQ_TYPE_NONE>, - <0x1 0xf0 0x7 IRQ_TYPE_NONE>, - <0x1 0xf1 0x0 IRQ_TYPE_NONE>, - <0x1 0xf1 0x1 IRQ_TYPE_NONE>, - <0x1 0xf1 0x2 IRQ_TYPE_NONE>, - <0x1 0xf1 0x3 IRQ_TYPE_NONE>, - <0x1 0xf1 0x4 IRQ_TYPE_NONE>, - <0x1 0xf1 0x5 IRQ_TYPE_NONE>; - interrupt-names = "cdc_spk_cnp_int", - "cdc_spk_clip_int", - "cdc_spk_ocp_int", - "mbhc_ins_rem_det1", - "mbhc_but_rel_det", - "mbhc_but_press_det", - "mbhc_ins_rem_det", - "mbhc_switch_int", - "cdc_ear_ocp_int", - "cdc_hphr_ocp_int", - "cdc_hphl_ocp_det", - "cdc_ear_cnp_int", - "cdc_hphr_cnp_int", - "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; - #sound-dai-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml new file mode 100644 index 000000000000..94e7a1860977 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8916 WCD Analog Audio Codec + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + The analog WCD audio codec found on Qualcomm PM8916 PMIC. + +properties: + compatible: + const: qcom,pm8916-wcd-analog-codec + + reg: + maxItems: 1 + + interrupts: + maxItems: 14 + + interrupt-names: + items: + - const: cdc_spk_cnp_int + - const: cdc_spk_clip_int + - const: cdc_spk_ocp_int + - const: mbhc_ins_rem_det1 + - const: mbhc_but_rel_det + - const: mbhc_but_press_det + - const: mbhc_ins_rem_det + - const: mbhc_switch_int + - const: cdc_ear_ocp_int + - const: cdc_hphr_ocp_int + - const: cdc_hphl_ocp_det + - const: cdc_ear_cnp_int + - const: cdc_hphr_cnp_int + - const: cdc_hphl_cnp_int + + vdd-cdc-io-supply: + description: 1.8V buck supply + + vdd-cdc-tx-rx-cx-supply: + description: 1.8V SIDO buck supply + + vdd-micbias-supply: + description: micbias supply + + qcom,mbhc-vthreshold-low: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Array of 5 threshold voltages in mV for 5-button detection on + headset when MBHC is powered by an internal current source. + minItems: 5 + maxItems: 5 + + qcom,mbhc-vthreshold-high: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Array of 5 threshold voltages in mV for 5-button detection on + headset when MBHC is powered from micbias. + minItems: 5 + maxItems: 5 + + qcom,micbias-lvl: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Voltage (mV) for Mic Bias + + qcom,hphl-jack-type-normally-open: + type: boolean + description: + True if the HPHL pin on the jack is NO (Normally Open), false if it's + NC (Normally Closed). + + qcom,gnd-jack-type-normally-open: + type: boolean + description: + True if the GND pin on the jack is NO (Normally Open), false if it's + NC (Normally Closed). + + qcom,micbias1-ext-cap: + type: boolean + description: + True if micbias1 has an external capacitor. + + qcom,micbias2-ext-cap: + type: boolean + description: + True if micbias2 has an external capacitor. + + "#sound-dai-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/spmi/spmi.h> + + pmic@1 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index b731f16aea84..dfd768b1ad7d 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -94,7 +94,7 @@ see "Example: simple sound card for Asynchronous mode" [xx]ch [yy]ch ------> [CTU] --------> -CTU can convert [xx]ch to [yy]ch, or exchange outputed channel. +CTU can convert [xx]ch to [yy]ch, or exchange outputted channel. CTU conversion needs matrix settings. For more detail information, see below diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 8a821dec9526..13a5a0a10fe6 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -9,6 +9,20 @@ title: Renesas R-Car Sound Driver maintainers: - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +definitions: + port-def: + $ref: audio-graph-port.yaml#/definitions/port-base + unevaluatedProperties: false + patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: audio-graph-port.yaml#/definitions/endpoint-base + properties: + playback: + $ref: /schemas/types.yaml#/definitions/phandle-array + capture: + $ref: /schemas/types.yaml#/definitions/phandle-array + unevaluatedProperties: false + properties: compatible: @@ -77,6 +91,12 @@ properties: it must be 1 if your system has audio_clkout0/1/2/3 enum: [0, 1] + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + clock-frequency: description: for audio_clkout0/1/2/3 @@ -103,35 +123,9 @@ properties: description: List of necessary clock names. # details are defined below - ports: - $ref: audio-graph-port.yaml#/definitions/port-base - unevaluatedProperties: false - patternProperties: - '^port(@[0-9a-f]+)?$': - $ref: audio-graph-port.yaml#/definitions/port-base - unevaluatedProperties: false - patternProperties: - "^endpoint(@[0-9a-f]+)?": - $ref: audio-graph-port.yaml#/definitions/endpoint-base - properties: - playback: - $ref: /schemas/types.yaml#/definitions/phandle-array - capture: - $ref: /schemas/types.yaml#/definitions/phandle-array - unevaluatedProperties: false - + # ports is below port: - $ref: audio-graph-port.yaml#/definitions/port-base - unevaluatedProperties: false - patternProperties: - "^endpoint(@[0-9a-f]+)?": - $ref: audio-graph-port.yaml#/definitions/endpoint-base - properties: - playback: - $ref: /schemas/types.yaml#/definitions/phandle-array - capture: - $ref: /schemas/types.yaml#/definitions/phandle-array - unevaluatedProperties: false + $ref: "#/definitions/port-def" rcar_sound,dvc: description: DVC subnode. @@ -248,8 +242,9 @@ properties: - interrupts additionalProperties: false +patternProperties: # For DAI base - rcar_sound,dai: + 'rcar_sound,dai(@[0-9a-f]+)?$': description: DAI subnode. type: object patternProperties: @@ -269,6 +264,13 @@ properties: - capture additionalProperties: false + 'ports(@[0-9a-f]+)?$': + $ref: audio-graph-port.yaml#/definitions/port-base + unevaluatedProperties: false + patternProperties: + '^port(@[0-9a-f]+)?$': + $ref: "#/definitions/port-def" + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt index e5430d1d34e4..73577ac1b89c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt @@ -12,7 +12,7 @@ Required properties: source. For this driver the first string should always be "Analog". -Optionnal properties: +Optional properties: - rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the headphone (when the analog output is an headphone). - rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 2a55e9133408..24a6dab28f25 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -28,7 +28,7 @@ Optional properties: If the value is 0, it means the impedance sensing is not supported. - "realtek,impedance_sensing_table" The matrix rows of the impedance sensing table are consisted by impedance - minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and + minimum, impedance maximum, volume, DC offset w/o and w/ mic of each L and R channel accordingly. Example is shown as following. < 0 300 7 0xffd160 0xffd1c0 0xff8a10 0xff8ab0 301 65535 4 0xffe470 0xffe470 0xffb8e0 0xffb8e0> diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml index 447e013f6e17..5ea0819a261a 100644 --- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml @@ -9,6 +9,9 @@ title: Samsung Aries audio complex with WM8994 codec maintainers: - Jonathan Bakker <xc-racer2@live.ca> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: enum: @@ -17,10 +20,6 @@ properties: # Without FM radio and modem slave - samsung,fascinate4g-wm8994 - model: - $ref: /schemas/types.yaml#/definitions/string - description: The user-visible name of this sound complex. - cpu: type: object additionalProperties: false @@ -46,6 +45,7 @@ properties: samsung,audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true description: | List of the connections between audio components; each entry is a pair of strings, the first being the @@ -56,6 +56,7 @@ properties: or FM In For samsung,fascinate4g-wm8994: HP, SPK, RCV, LINE, Main Mic, or HeadsetMic + Deprecated, use audio-routing. extcon: description: Extcon phandle for dock detection @@ -87,10 +88,9 @@ properties: required: - compatible - - model - cpu - codec - - samsung,audio-routing + - audio-routing - extcon - main-micbias-supply - headset-micbias-supply @@ -98,7 +98,7 @@ required: - headset-detect-gpios - headset-key-gpios -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -121,7 +121,7 @@ examples: headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>; headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>; - samsung,audio-routing = + audio-routing = "HP", "HPOUT1L", "HP", "HPOUT1R", diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml index 31095913e330..6ec80f529d84 100644 --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml @@ -9,14 +9,13 @@ title: Samsung Midas audio complex with WM1811 codec maintainers: - Sylwester Nawrocki <s.nawrocki@samsung.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: const: samsung,midas-audio - model: - $ref: /schemas/types.yaml#/definitions/string - description: The user-visible name of this sound complex. - cpu: type: object additionalProperties: false @@ -38,6 +37,7 @@ properties: - sound-dai samsung,audio-routing: + deprecated: true $ref: /schemas/types.yaml#/definitions/non-unique-string-array description: | List of the connections between audio components; each entry is @@ -45,6 +45,7 @@ properties: being the connection's source; valid names for sources and sinks are the WM1811's pins (as documented in its binding), and the jacks on the board: HP, SPK, Main Mic, Sub Mic, Headset Mic. + Deprecated, use audio-routing. mic-bias-supply: description: Supply for the micbias on the Main microphone @@ -62,14 +63,13 @@ properties: required: - compatible - - model - cpu - codec - - samsung,audio-routing + - audio-routing - mic-bias-supply - submic-bias-supply -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -84,7 +84,7 @@ examples: mic-bias-supply = <&mic_bias_reg>; submic-bias-supply = <&submic_bias_reg>; - samsung,audio-routing = + audio-routing = "HP", "HPOUT1L", "HP", "HPOUT1R", diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index c6751c40e63f..b77284e3e26a 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -10,6 +10,9 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: oneOf: @@ -24,10 +27,6 @@ properties: - const: samsung,odroid-xu4-audio deprecated: true - model: - $ref: /schemas/types.yaml#/definitions/string - description: The user-visible name of this sound complex. - assigned-clock-parents: true assigned-clock-rates: true assigned-clocks: true @@ -52,6 +51,7 @@ properties: samsung,audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true description: | List of the connections between audio components; each entry is a pair of strings, the first being the @@ -61,6 +61,7 @@ properties: For Odroid X2: "Headphone Jack", "Mic Jack", "DMIC" For Odroid U3, XU3: "Headphone Jack", "Speakers" For Odroid XU4: no entries + Deprecated, use audio-routing. samsung,audio-widgets: $ref: /schemas/types.yaml#/definitions/non-unique-string-array @@ -70,18 +71,17 @@ properties: required: - compatible - - model - cpu - codec -additionalProperties: false +unevaluatedProperties: false examples: - | sound { compatible = "hardkernel,odroid-xu3-audio"; model = "Odroid-XU3"; - samsung,audio-routing = + audio-routing = "Headphone Jack", "HPL", "Headphone Jack", "HPR", "IN1", "Mic Jack", diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml index 491e08019c04..760592599143 100644 --- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml @@ -10,6 +10,9 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> +allOf: + - $ref: sound-card-common.yaml# + properties: compatible: const: samsung,tm2-audio @@ -32,6 +35,8 @@ properties: being the connection's source; valid names for sources and sinks are the WM5110's and MAX98504's pins and the jacks on the board: HP, SPK, Main Mic, Sub Mic, Third Mic, Headset Mic. + Deprecated, use audio-routing. + deprecated: true $ref: /schemas/types.yaml#/definitions/non-unique-string-array i2s-controller: @@ -44,20 +49,15 @@ properties: mic-bias-gpios: description: GPIO pin that enables the Main Mic bias regulator. - model: - description: The user-visible name of this sound complex. - $ref: /schemas/types.yaml#/definitions/string - required: - compatible - audio-amplifier - audio-codec - - samsung,audio-routing + - audio-routing - i2s-controller - mic-bias-gpios - - model -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -70,7 +70,7 @@ examples: audio-amplifier = <&max98504>; mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; model = "wm5110"; - samsung,audio-routing = "HP", "HPOUT1L", + audio-routing = "HP", "HPOUT1L", "HP", "HPOUT1R", "SPK", "SPKOUT", "SPKOUT", "HPOUT2L", diff --git a/Documentation/devicetree/bindings/sound/serial-midi.yaml b/Documentation/devicetree/bindings/sound/serial-midi.yaml index 4afc29376efc..f6a807329a5a 100644 --- a/Documentation/devicetree/bindings/sound/serial-midi.yaml +++ b/Documentation/devicetree/bindings/sound/serial-midi.yaml @@ -20,7 +20,7 @@ description: parent serial device. If the standard MIDI baud of 31.25 kBaud is needed (as would be the case if interfacing with arbitrary external MIDI devices), configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud - resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) + results in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default) properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index b05e05c81cc4..59ac2d1d1ccf 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -148,6 +148,15 @@ definitions: required: - sound-dai + additional-devs: + type: object + description: + Additional devices used by the simple audio card. + patternProperties: + '^iio-aux(-.+)?$': + type: object + $ref: audio-iio-aux.yaml# + properties: compatible: contains: @@ -187,6 +196,8 @@ properties: $ref: "#/definitions/mclk-fs" simple-audio-card,aux-devs: $ref: "#/definitions/aux-devs" + simple-audio-card,additional-devs: + $ref: "#/definitions/additional-devs" simple-audio-card,convert-rate: $ref: "#/definitions/convert-rate" simple-audio-card,convert-channels: @@ -360,6 +371,48 @@ examples: }; # -------------------- +# route audio to/from a codec through an amplifier +# designed with a potentiometer driven by IIO: +# -------------------- + - | + sound { + compatible = "simple-audio-card"; + + simple-audio-card,aux-devs = <&_in>, <&_out>; + simple-audio-card,routing = + "CODEC LEFTIN", "AMP_IN LEFT OUT", + "CODEC RIGHTIN", "AMP_IN RIGHT OUT", + "AMP_OUT LEFT IN", "CODEC LEFTOUT", + "AMP_OUT RIGHT IN", "CODEC RIGHTOUT"; + + simple-audio-card,additional-devs { + amp_out: iio-aux-out { + compatible = "audio-iio-aux"; + io-channels = <&pot_out 0>, <&pot_out 1>; + io-channel-names = "LEFT", "RIGHT"; + snd-control-invert-range = <1 1>; + sound-name-prefix = "AMP_OUT"; + }; + + amp_in: iio_aux-in { + compatible = "audio-iio-aux"; + io-channels = <&pot_in 0>, <&pot_in 1>; + io-channel-names = "LEFT", "RIGHT"; + sound-name-prefix = "AMP_IN"; + }; + }; + + simple-audio-card,cpu { + sound-dai = <&cpu>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clocks>; + }; + }; + +# -------------------- # Sampling Rate Conversion # -------------------- - | diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml index a970fd264b21..a48d040b0a4f 100644 --- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml @@ -17,6 +17,9 @@ properties: - const: snps,designware-i2s - enum: - snps,designware-i2s + - starfive,jh7110-i2stx0 + - starfive,jh7110-i2stx1 + - starfive,jh7110-i2srx reg: maxItems: 1 @@ -29,15 +32,36 @@ properties: maxItems: 1 clocks: - description: Sampling rate reference clock - maxItems: 1 + items: + - description: Sampling rate reference clock + - description: APB clock + - description: Audio master clock + - description: Inner audio master clock source + - description: External audio master clock source + - description: Bit clock + - description: Left/right channel clock + - description: External bit clock + - description: External left/right channel clock + minItems: 1 clock-names: - const: i2sclk + items: + - const: i2sclk + - const: apb + - const: mclk + - const: mclk_inner + - const: mclk_ext + - const: bclk + - const: lrck + - const: bclk_ext + - const: lrck_ext + minItems: 1 resets: items: - description: Optional controller resets + - description: controller reset of Sampling rate + minItems: 1 dmas: items: @@ -51,6 +75,17 @@ properties: - const: rx minItems: 1 + starfive,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller sys_syscon node. + - description: I2S-rx enabled control offset of SYS_SYSCONSAIF__SYSCFG register. + - description: I2S-rx enabled control mask + description: + The phandle to System Register Controller syscon node and the I2S-rx(ADC) + enabled control offset and mask of SYS_SYSCONSAIF__SYSCFG register. + allOf: - $ref: dai-common.yaml# - if: @@ -66,6 +101,73 @@ allOf: properties: "#sound-dai-cells": const: 0 + - if: + properties: + compatible: + contains: + const: snps,designware-i2s + then: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + resets: + maxItems: 1 + else: + properties: + resets: + minItems: 2 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: starfive,jh7110-i2stx0 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + minItems: 5 + maxItems: 5 + required: + - resets + - if: + properties: + compatible: + contains: + const: starfive,jh7110-i2stx1 + then: + properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + minItems: 9 + maxItems: 9 + required: + - resets + - if: + properties: + compatible: + contains: + const: starfive,jh7110-i2srx + then: + properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + minItems: 9 + maxItems: 9 + required: + - resets + - starfive,syscon + else: + properties: + starfive,syscon: false required: - compatible diff --git a/Documentation/devicetree/bindings/sound/sound-card-common.yaml b/Documentation/devicetree/bindings/sound/sound-card-common.yaml new file mode 100644 index 000000000000..3a941177f684 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/sound-card-common.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/sound-card-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Board Sound Card Common Properties + +maintainers: + - Mark Brown <broonie@kernel.org> + +properties: + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + +required: + - model + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/sprd-pcm.txt b/Documentation/devicetree/bindings/sound/sprd-pcm.txt index 4b23e84b2e57..fbbcade2181d 100644 --- a/Documentation/devicetree/bindings/sound/sprd-pcm.txt +++ b/Documentation/devicetree/bindings/sound/sprd-pcm.txt @@ -1,4 +1,4 @@ -* Spreadtrum DMA platfrom bindings +* Spreadtrum DMA platform bindings Required properties: - compatible: Should be "sprd,pcm-platform". diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 56d206f97a96..59df8a832310 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -63,7 +63,7 @@ patternProperties: additionalProperties: false description: Two subnodes corresponding to SAI sub-block instances A et B - can be defined. Subnode can be omitted for unsused sub-block. + can be defined. Subnode can be omitted for unused sub-block. properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml index 859d369c71e2..5b2874a80a4d 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -13,7 +13,7 @@ maintainers: description: | The Infotainment board plugs into the Common Processor Board, the support of the - extension board is extending the CPB audio support, decribed in: + extension board is extending the CPB audio support, described in: sound/ti,j721e-cpb-audio.txt The audio support on the Infotainment Expansion Board consists of McASP0 diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index 8d60e4e236d6..a69e6c223308 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -29,7 +29,7 @@ properties: reg: description: I2C address, in multiple tas2781s case, all the i2c address - aggreate as one Audio Device to support multiple audio slots. + aggregate as one Audio Device to support multiple audio slots. maxItems: 8 minItems: 1 items: diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index c16e1760cf85..f3274bcc4c05 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -32,7 +32,7 @@ properties: reg: maxItems: 1 description: | - I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f reset-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml new file mode 100644 index 000000000000..329260cf0fa0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8904.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8904/WM8912 audio codecs + +maintainers: + - patches@opensource.cirrus.com + +description: | + Pins on the device (for linking into audio routes): + IN1L, IN1R, IN2L, IN2R, IN3L, IN3R, HPOUTL, HPOUTR, LINEOUTL, LINEOUTR, + MICBIAS + +properties: + compatible: + enum: + - wlf,wm8904 + - wlf,wm8912 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + AVDD-supply: true + CPVDD-supply: true + DBVDD-supply: true + DCVDD-supply: true + MICVDD-supply: true + +required: + - compatible + - reg + - clocks + - clock-names + - AVDD-supply + - CPVDD-supply + - DBVDD-supply + - DCVDD-supply + - MICVDD-supply + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; + AVDD-supply = <®_1p8v>; + CPVDD-supply = <®_1p8v>; + DBVDD-supply = <®_1p8v>; + DCVDD-supply = <®_1p8v>; + MICVDD-supply = <®_1p8v>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml index ee8eba7f0104..62e62c335d07 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml @@ -26,6 +26,21 @@ properties: '#sound-dai-cells': const: 0 + AVDD-supply: + description: Analogue supply. + + DBVDD-supply: + description: Digital Buffer Supply. + + DCVDD-supply: + description: Digital Core Supply. + + SPKVDD1-supply: + description: Supply for speaker drivers 1. + + SPKVDD2-supply: + description: Supply for speaker drivers 2. + wlf,capless: type: boolean description: @@ -84,5 +99,10 @@ examples: wlf,hp-cfg = <3 2 3>; wlf,gpio-cfg = <1 3>; wlf,shared-lrclk; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; }; }; diff --git a/Documentation/devicetree/bindings/sound/wm8904.txt b/Documentation/devicetree/bindings/sound/wm8904.txt deleted file mode 100644 index 66bf261423b9..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8904.txt +++ /dev/null @@ -1,33 +0,0 @@ -WM8904 audio CODEC - -This device supports I2C only. - -Required properties: - - compatible: "wlf,wm8904" or "wlf,wm8912" - - reg: the I2C address of the device. - - clock-names: "mclk" - - clocks: reference to - <Documentation/devicetree/bindings/clock/clock-bindings.txt> - -Pins on the device (for linking into audio routes): - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * MICBIAS - -Examples: - -codec: wm8904@1a { - compatible = "wlf,wm8904"; - reg = <0x1a>; - clocks = <&pck0>; - clock-names = "mclk"; -}; diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index fb44b89a754e..7d60a9654912 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -159,7 +159,7 @@ properties: qcom,ports-hstart: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Identifying lowerst numbered coloum in SoundWire Frame, + Identifying lowerst numbered column in SoundWire Frame, i.e. left edge of the Transport sub-frame for each port. Out ports followed by In ports. Value of 0xff indicates that this option is not implemented @@ -176,7 +176,7 @@ properties: qcom,ports-hstop: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Identifying highest numbered coloum in SoundWire Frame, + Identifying highest numbered column in SoundWire Frame, i.e. the right edge of the Transport sub-frame for each port. Out ports followed by In ports. Value of 0xff indicates that this option is not implemented diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt index 9887b0724759..d7668f41b03b 100644 --- a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt @@ -1,4 +1,4 @@ -Broadcom BCM2835 auxiliar SPI1/2 controller +Broadcom BCM2835 auxiliary SPI1/2 controller The BCM2835 contains two forms of SPI master controller, one known simply as SPI0, and the other known as the "Universal SPI Master"; part of the @@ -9,7 +9,7 @@ Required properties: - reg: Should contain register location and length for the spi block - interrupts: Should contain shared interrupt of the aux block - clocks: The clock feeding the SPI controller - needs to - point to the auxiliar clock driver of the bcm2835, + point to the auxiliary clock driver of the bcm2835, as this clock will enable the output gate for the specific clock. - cs-gpios: the cs-gpios (native cs is NOT supported) diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml new file mode 100644 index 000000000000..fa03cdd68e70 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6348/BCM6358 SPI controller + +maintainers: + - Jonas Gorski <jonas.gorski@gmail.com> + +description: | + Broadcom "Low Speed" SPI controller found in many older MIPS based Broadband + SoCs. + + This controller has a limitation that can not keep the chip select line active + between the SPI transfers within the same SPI message. This can terminate the + transaction to some SPI devices prematurely. The issue can be worked around by + the controller's prepend mode. + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm6368-spi + - brcm,bcm6362-spi + - brcm,bcm63268-spi + - const: brcm,bcm6358-spi + - enum: + - brcm,bcm6348-spi + - brcm,bcm6358-spi + + reg: + maxItems: 1 + + clocks: + items: + - description: SPI master reference clock + + clock-names: + items: + - const: spi + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + spi@10000800 { + compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi"; + reg = <0x10000800 0x70c>; + interrupts = <1>; + clocks = <&clkctl 9>; + clock-names = "spi"; + num-cs = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml index 28222aae3077..45975f40d943 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml @@ -12,7 +12,7 @@ maintainers: description: | The Broadcom SPI controller is a SPI master found on various SOCs, including - BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits + BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consists of: MSPI : SPI master controller can read and write to a SPI slave device BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration @@ -20,7 +20,7 @@ description: | io with 3-byte and 4-byte addressing support. Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP. - MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance + MSPI master can be used without BSPI. BRCMSTB SoCs have an additional instance of a MSPI master without the BSPI to use with non flash slave devices that use SPI protocol. diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index 4f15f9a0cc34..cca81f89e252 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -86,7 +86,17 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - const: ref + - items: + - const: ref + - const: ahb + - const: apb cdns,fifo-depth: description: diff --git a/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml b/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml new file mode 100644 index 000000000000..de9d32feadf5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/loongson,ls2k-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SPI controller + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - loongson,ls2k1000-spi + - items: + - enum: + - loongson,ls2k0500-spi + - const: loongson,ls2k1000-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + spi0: spi@1fff0220{ + compatible = "loongson,ls2k1000-spi"; + reg = <0x1fff0220 0x10>; + clocks = <&clk 17>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt deleted file mode 100644 index db8e0d71c5bc..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ /dev/null @@ -1,61 +0,0 @@ -NVIDIA Tegra114 SPI controller. - -Required properties: -- compatible : For Tegra114, must contain "nvidia,tegra114-spi". - Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where - <chip> is tegra124, tegra132, or tegra210. -- reg: Should contain SPI registers location and length. -- interrupts: Should contain SPI interrupts. -- clock-names : Must include the following entries: - - spi -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -Optional properties: -- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device - with this tap value. This property is used to tune the outgoing data from - Tegra SPI master with respect to outgoing Tegra SPI master clock. - Tap values vary based on the platform design trace lengths from Tegra SPI - to corresponding slave devices. Valid tap values are from 0 thru 63. -- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device - with this tap value. This property is used to adjust the Tegra SPI master - clock with respect to the data from the SPI slave device. - Tap values vary based on the platform design trace lengths from Tegra SPI - to corresponding slave devices. Valid tap values are from 0 thru 63. - -Example: - -spi@7000d600 { - compatible = "nvidia,tegra114-spi"; - reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 44>; - clock-names = "spi"; - resets = <&tegra_car 44>; - reset-names = "spi"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; - <spi-client>@<bus_num> { - ... - ... - nvidia,rx-clk-tap-delay = <0>; - nvidia,tx-clk-tap-delay = <16>; - ... - }; - -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml new file mode 100644 index 000000000000..58222ffa53d7 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra114-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra114 SPI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - const: nvidia,tegra114-spi + - items: + - enum: + - nvidia,tegra210-spi + - nvidia,tegra124-spi + - const: nvidia,tegra114-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SPI module clock + + clock-names: + items: + - const: spi + + resets: + items: + - description: SPI module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel for the reception FIFO + - description: DMA channel for the transmission FIFO + + dma-names: + items: + - const: rx + - const: tx + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + spi@7000d600 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + + spi-max-frequency = <25000000>; + + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + nvidia,rx-clk-tap-delay = <0>; + nvidia,tx-clk-tap-delay = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt deleted file mode 100644 index c212491929b5..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ /dev/null @@ -1,37 +0,0 @@ -NVIDIA Tegra20 SFLASH controller. - -Required properties: -- compatible : should be "nvidia,tegra20-sflash". -- reg: Should contain SFLASH registers location and length. -- interrupts: Should contain SFLASH interrupts. -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - -spi@7000c380 { - compatible = "nvidia,tegra20-sflash"; - reg = <0x7000c380 0x80>; - interrupts = <0 39 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 43>; - resets = <&tegra_car 43>; - reset-names = "spi"; - dmas = <&apbdma 11>, <&apbdma 11>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml new file mode 100644 index 000000000000..e245bad85a25 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra20-sflash.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 SFLASH controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra20-sflash + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7000c380 { + compatible = "nvidia,tegra20-sflash"; + reg = <0x7000c380 0x80>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SPI>; + resets = <&tegra_car 43>; + reset-names = "spi"; + dmas = <&apbdma 11>, <&apbdma 11>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt deleted file mode 100644 index 40d80b93e327..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ /dev/null @@ -1,37 +0,0 @@ -NVIDIA Tegra20/Tegra30 SLINK controller. - -Required properties: -- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink". -- reg: Should contain SLINK registers location and length. -- interrupts: Should contain SLINK interrupts. -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - -spi@7000d600 { - compatible = "nvidia,tegra20-slink"; - reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 44>; - resets = <&tegra_car 44>; - reset-names = "spi"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml new file mode 100644 index 000000000000..291c25ec015d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra20-slink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20/30 SLINK controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-slink + - nvidia,tegra30-slink + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + items: + - description: phandle to the core power domain + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7000d600 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SBC2>; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml index 352affa4b7f8..ff4d361707bd 100644 --- a/Documentation/devicetree/bindings/spi/omap-spi.yaml +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml @@ -68,7 +68,7 @@ properties: dma-names: description: List of DMA request names. These strings correspond 1:1 with - the DMA sepecifiers listed in dmas. The string names is to be + the DMA specifiers listed in dmas. The string names is to be "rxN" and "txN" for RX and TX requests, respectively. Where N is the chip select number. minItems: 1 diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt deleted file mode 100644 index 1c16f6692613..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for Broadcom BCM6348/BCM6358 SPI controller - -Required properties: -- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi". -- reg: Base address and size of the controllers memory area. -- interrupts: Interrupt for the SPI block. -- clocks: phandle of the SPI clock. -- clock-names: has to be "spi". -- #address-cells: <1>, as required by generic SPI binding. -- #size-cells: <0>, also as required by generic SPI binding. - -Optional properties: -- num-cs: some controllers have less than 8 cs signals. Defaults to 8 - if absent. - -Child nodes as per the generic SPI binding. - -Example: - - spi@10000800 { - compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi"; - reg = <0x10000800 0x70c>; - - interrupts = <1>; - - clocks = <&clkctl 9>; - clock-names = "spi"; - - num-cs = <5>; - - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index b7552739b554..d4b61b0e8301 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -49,6 +49,12 @@ properties: enum: [ 0, 1 ] default: 0 + power-domains: + maxItems: 1 + + label: + description: Descriptive name of the SPI controller. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index e91425012319..727c5346b8ce 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -63,6 +63,9 @@ properties: maximum: 2 default: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml index a813c971ecf6..7fd591145480 100644 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml @@ -45,6 +45,9 @@ properties: - const: fspi_en - const: fspi + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 91e540a92faf..5e5a704a766e 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: spi-controller.yaml# + - $ref: /schemas/arm/primecell.yaml# # We need a select here so we don't match all nodes with 'arm,primecell' select: diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml index 4bbf6db0b6bd..61c784ef7b51 100644 --- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml @@ -15,7 +15,9 @@ description: | properties: compatible: - const: qcom,msm8974-ocmem + enum: + - qcom,msm8226-ocmem # v1.1.0 + - qcom,msm8974-ocmem # v1.4.0 reg: items: @@ -28,11 +30,13 @@ properties: - const: mem clocks: + minItems: 1 items: - description: Core clock - description: Interface clock clock-names: + minItems: 1 items: - const: core - const: iface @@ -58,6 +62,26 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8974-ocmem + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + else: + properties: + clocks: + minItems: 1 + clock-names: + minItems: 1 + patternProperties: "-sram@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt deleted file mode 100644 index aea4a2a178b9..000000000000 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt +++ /dev/null @@ -1,238 +0,0 @@ -Tegra124 SOCTHERM thermal management system - -The SOCTHERM IP block contains thermal sensors, support for polled -or interrupt-based thermal monitoring, CPU and GPU throttling based -on temperature trip points, and handling external overcurrent -notifications. It is also used to manage emergency shutdown in an -overheating situation. - -Required properties : -- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm". - For Tegra132, must contain "nvidia,tegra132-soctherm". - For Tegra210, must contain "nvidia,tegra210-soctherm". -- reg : Should contain at least 2 entries for each entry in reg-names: - - SOCTHERM register set - - Tegra CAR register set: Required for Tegra124 and Tegra210. - - CCROC register set: Required for Tegra132. -- reg-names : Should contain at least 2 entries: - - soctherm-reg - - car-reg - - ccroc-reg -- interrupts : Defines the interrupt used by SOCTHERM -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - tsensor - - soctherm -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - soctherm -- #thermal-sensor-cells : Should be 1. For a description of this property, see - Documentation/devicetree/bindings/thermal/thermal-sensor.yaml. - See <dt-bindings/thermal/tegra124-soctherm.h> for a list of valid values - when referring to thermal sensors. -- throttle-cfgs: A sub-node which is a container of configuration for each - hardware throttle events. These events can be set as cooling devices. - * throttle events: Sub-nodes must be named as "light" or "heavy". - Properties: - - nvidia,priority: Each throttles has its own throttle settings, so the - SW need to set priorities for various throttle, the HW arbiter can select - the final throttle settings. - Bigger value indicates higher priority, In general, higher priority - translates to lower target frequency. SW needs to ensure that critical - thermal alarms are given higher priority, and ensure that there is - no race if priority of two vectors is set to the same value. - The range of this value is 1~100. - - nvidia,cpu-throt-percent: This property is for Tegra124 and Tegra210. - It is the throttling depth of pulse skippers, it's the percentage - throttling. - - nvidia,cpu-throt-level: This property is only for Tegra132, it is the - level of pulse skippers, which used to throttle clock frequencies. It - indicates cpu clock throttling depth, and the depth can be programmed. - Must set as following values: - TEGRA_SOCTHERM_THROT_LEVEL_LOW, TEGRA_SOCTHERM_THROT_LEVEL_MED - TEGRA_SOCTHERM_THROT_LEVEL_HIGH, TEGRA_SOCTHERM_THROT_LEVEL_NONE - - nvidia,gpu-throt-level: This property is for Tegra124 and Tegra210. - It is the level of pulse skippers, which used to throttle clock - frequencies. It indicates gpu clock throttling depth and can be - programmed to any of the following values which represent a throttling - percentage: - TEGRA_SOCTHERM_THROT_LEVEL_NONE (0%) - TEGRA_SOCTHERM_THROT_LEVEL_LOW (50%), - TEGRA_SOCTHERM_THROT_LEVEL_MED (75%), - TEGRA_SOCTHERM_THROT_LEVEL_HIGH (85%). - - #cooling-cells: Should be 1. This cooling device only support on/off state. - For a description of this property see: - Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml - - Optional properties: The following properties are T210 specific and - valid only for OCx throttle events. - - nvidia,count-threshold: Specifies the number of OC events that are - required for triggering an interrupt. Interrupts are not triggered if - the property is missing. A value of 0 will interrupt on every OC alarm. - - nvidia,polarity-active-low: Configures the polarity of the OC alaram - signal. If present, this means assert low, otherwise assert high. - - nvidia,alarm-filter: Number of clocks to filter event. When the filter - expires (which means the OC event has not occurred for a long time), - the counter is cleared and filter is rearmed. Default value is 0. - - nvidia,throttle-period-us: Specifies the number of uSec for which - throttling is engaged after the OC event is deasserted. Default value - is 0. - -Optional properties: -- nvidia,thermtrips : When present, this property specifies the temperature at - which the soctherm hardware will assert the thermal trigger signal to the - Power Management IC, which can be configured to reset or shutdown the device. - It is an array of pairs where each pair represents a tsensor id followed by a - temperature in milli Celcius. In the absence of this property the critical - trip point will be used for thermtrip temperature. - -Note: -- the "critical" type trip points will be used to set the temperature at which -the SOC_THERM hardware will assert a thermal trigger if the "nvidia,thermtrips" -property is missing. When the thermtrips property is present, the breach of a -critical trip point is reported back to the thermal framework to implement -software shutdown. - -- the "hot" type trip points will be set to SOC_THERM hardware as the throttle -temperature. Once the temperature of this thermal zone is higher -than it, it will trigger the HW throttle event. - -Example : - - soctherm@700e2000 { - compatible = "nvidia,tegra124-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ - 0x0 0x60006000 0x0 0x400 /* CAR reg_base */ - reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, - <&tegra_car TEGRA124_CLK_SOC_THERM>; - clock-names = "tsensor", "soctherm"; - resets = <&tegra_car 78>; - reset-names = "soctherm"; - - #thermal-sensor-cells = <1>; - - nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500 - TEGRA124_SOCTHERM_SENSOR_GPU 103000>; - - throttle-cfgs { - /* - * When the "heavy" cooling device triggered, - * the HW will skip cpu clock's pulse in 85% depth, - * skip gpu clock's pulse in 85% level - */ - throttle_heavy: heavy { - nvidia,priority = <100>; - nvidia,cpu-throt-percent = <85>; - nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; - - #cooling-cells = <1>; - }; - - /* - * When the "light" cooling device triggered, - * the HW will skip cpu clock's pulse in 50% depth, - * skip gpu clock's pulse in 50% level - */ - throttle_light: light { - nvidia,priority = <80>; - nvidia,cpu-throt-percent = <50>; - nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_LOW>; - - #cooling-cells = <1>; - }; - - /* - * If these two devices are triggered in same time, the HW throttle - * arbiter will select the highest priority as the final throttle - * settings to skip cpu pulse. - */ - - throttle_oc1: oc1 { - nvidia,priority = <50>; - nvidia,polarity-active-low; - nvidia,count-threshold = <100>; - nvidia,alarm-filter = <5100000>; - nvidia,throttle-period-us = <0>; - nvidia,cpu-throt-percent = <75>; - nvidia,gpu-throt-level = - <TEGRA_SOCTHERM_THROT_LEVEL_MED>; - }; - }; - }; - -Example: referring to Tegra132's "reg", "reg-names" and "throttle-cfgs" : - - soctherm@700e2000 { - compatible = "nvidia,tegra132-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ - 0x0 0x70040000 0x0 0x200>; /* CCROC reg_base */; - reg-names = "soctherm-reg", "ccroc-reg"; - - throttle-cfgs { - /* - * When the "heavy" cooling device triggered, - * the HW will skip cpu clock's pulse in HIGH level - */ - throttle_heavy: heavy { - nvidia,priority = <100>; - nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; - - #cooling-cells = <1>; - }; - - /* - * When the "light" cooling device triggered, - * the HW will skip cpu clock's pulse in MED level - */ - throttle_light: light { - nvidia,priority = <80>; - nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>; - - #cooling-cells = <1>; - }; - - /* - * If these two devices are triggered in same time, the HW throttle - * arbiter will select the highest priority as the final throttle - * settings to skip cpu pulse. - */ - - }; - }; - -Example: referring to thermal sensors : - - thermal-zones { - cpu { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = - <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; - - trips { - cpu_shutdown_trip: shutdown-trip { - temperature = <102500>; - hysteresis = <1000>; - type = "critical"; - }; - - cpu_throttle_trip: throttle-trip { - temperature = <100000>; - hysteresis = <1000>; - type = "hot"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_throttle_trip>; - cooling-device = <&throttle_heavy 1 1>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml new file mode 100644 index 000000000000..04a2ba1aa946 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml @@ -0,0 +1,380 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/nvidia,tegra124-soctherm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 SOCTHERM Thermal Management System + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The SOCTHERM IP block contains thermal sensors, support for + polled or interrupt-based thermal monitoring, CPU and GPU throttling based + on temperature trip points, and handling external overcurrent notifications. + It is also used to manage emergency shutdown in an overheating situation. + +properties: + compatible: + enum: + - nvidia,tegra124-soctherm + - nvidia,tegra132-soctherm + - nvidia,tegra210-soctherm + + reg: + maxItems: 2 + + reg-names: + maxItems: 2 + + interrupts: + items: + - description: module interrupt + - description: EDP interrupt + + interrupt-names: + items: + - const: thermal + - const: edp + + clocks: + items: + - description: thermal sensor clock + - description: module clock + + clock-names: + items: + - const: tsensor + - const: soctherm + + resets: + items: + - description: module reset + + reset-names: + items: + - const: soctherm + + "#thermal-sensor-cells": + const: 1 + + throttle-cfgs: + $ref: thermal-cooling-devices.yaml + description: A sub-node which is a container of configuration for each + hardware throttle events. These events can be set as cooling devices. + Throttle event sub-nodes must be named as "light" or "heavy". + unevaluatedProperties: false + patternProperties: + "^(light|heavy|oc1)$": + type: object + properties: + nvidia,priority: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 100 + description: Each throttles has its own throttle settings, so the + SW need to set priorities for various throttle, the HW arbiter + can select the final throttle settings. Bigger value indicates + higher priority, In general, higher priority translates to lower + target frequency. SW needs to ensure that critical thermal + alarms are given higher priority, and ensure that there is no + race if priority of two vectors is set to the same value. + + nvidia,cpu-throt-percent: + description: This property is for Tegra124 and Tegra210. It is the + throttling depth of pulse skippers, it's the percentage + throttling. + minimum: 0 + maximum: 100 + + nvidia,cpu-throt-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: This property is only for Tegra132, it is the level + of pulse skippers, which used to throttle clock frequencies. It + indicates cpu clock throttling depth, and the depth can be + programmed. + enum: + # none (TEGRA_SOCTHERM_THROT_LEVEL_NONE) + - 0 + # low (TEGRA_SOCTHERM_THROT_LEVEL_LOW) + - 1 + # medium (TEGRA_SOCTHERM_THROT_LEVEL_MED) + - 2 + # high (TEGRA_SOCTHERM_THROT_LEVEL_HIGH) + - 3 + + nvidia,gpu-throt-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: This property is for Tegra124 and Tegra210. It is the + level of pulse skippers, which used to throttle clock + frequencies. It indicates gpu clock throttling depth and can be + programmed to any of the following values which represent a + throttling percentage. + enum: + # none (0%, TEGRA_SOCTHERM_THROT_LEVEL_NONE) + - 0 + # low (50%, TEGRA_SOCTHERM_THROT_LEVEL_LOW) + - 1 + # medium (75%, TEGRA_SOCTHERM_THROT_LEVEL_MED) + - 2 + # high (85%, TEGRA_SOCTHERM_THROT_LEVEL_HIGH) + - 3 + + # optional + # Tegra210 specific and valid only for OCx throttle events + nvidia,count-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Specifies the number of OC events that are required + for triggering an interrupt. Interrupts are not triggered if the + property is missing. A value of 0 will interrupt on every OC + alarm. + + nvidia,polarity-active-low: + $ref: /schemas/types.yaml#/definitions/flag + description: Configures the polarity of the OC alaram signal. If + present, this means assert low, otherwise assert high. + + nvidia,alarm-filter: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of clocks to filter event. When the filter + expires (which means the OC event has not occurred for a long + time), the counter is cleared and filter is rearmed. + default: 0 + + nvidia,throttle-period-us: + description: Specifies the number of microseconds for which + throttling is engaged after the OC event is deasserted. + default: 0 + + # optional + nvidia,thermtrips: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + When present, this property specifies the temperature at which the + SOCTHERM hardware will assert the thermal trigger signal to the Power + Management IC, which can be configured to reset or shutdown the device. + It is an array of pairs where each pair represents a tsensor ID followed + by a temperature in milli Celcius. In the absence of this property the + critical trip point will be used for thermtrip temperature. + + Note: + - the "critical" type trip points will be used to set the temperature at + which the SOCTHERM hardware will assert a thermal trigger if the + "nvidia,thermtrips" property is missing. When the thermtrips property + is present, the breach of a critical trip point is reported back to + the thermal framework to implement software shutdown. + + - the "hot" type trip points will be set to SOCTHERM hardware as the + throttle temperature. Once the temperature of this thermal zone is + higher than it, it will trigger the HW throttle event. + items: + items: + - description: sensor ID + oneOf: + - description: CPU sensor + const: 0 + - description: MEM sensor + const: 1 + - description: GPU sensor + const: 2 + - description: PLLX sensor + const: 3 + - description: temperature threshold (in millidegree Celsius) + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - "#thermal-sensor-cells" + +allOf: + - $ref: thermal-sensor.yaml + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra124-soctherm + - nvidia,tegra210-soctherm + then: + properties: + reg: + items: + - description: SOCTHERM register set + - description: clock and reset controller registers + + reg-names: + items: + - const: soctherm-reg + - const: car-reg + + else: + properties: + reg: + items: + - description: SOCTHERM register set + - description: CCROC registers + + reg-names: + items: + - const: soctherm-reg + - const: ccroc-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/thermal/tegra124-soctherm.h> + + soctherm@700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x700e2000 0x600>, /* SOC_THERM reg_base */ + <0x60006000 0x400>; /* CAR reg_base */ + reg-names = "soctherm-reg", "car-reg"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + + #thermal-sensor-cells = <1>; + + nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500>, + <TEGRA124_SOCTHERM_SENSOR_GPU 103000>; + + throttle-cfgs { + /* + * When the "heavy" cooling device triggered, + * the HW will skip cpu clock's pulse in 85% depth, + * skip gpu clock's pulse in 85% level + */ + heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-percent = <85>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; + + #cooling-cells = <2>; + }; + + /* + * When the "light" cooling device triggered, + * the HW will skip cpu clock's pulse in 50% depth, + * skip gpu clock's pulse in 50% level + */ + light { + nvidia,priority = <80>; + nvidia,cpu-throt-percent = <50>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_LOW>; + + #cooling-cells = <2>; + }; + + /* + * If these two devices are triggered in same time, the HW throttle + * arbiter will select the highest priority as the final throttle + * settings to skip cpu pulse. + */ + + oc1 { + nvidia,priority = <50>; + nvidia,polarity-active-low; + nvidia,count-threshold = <100>; + nvidia,alarm-filter = <5100000>; + nvidia,throttle-period-us = <0>; + nvidia,cpu-throt-percent = <75>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>; + }; + }; + }; + + # referring to Tegra132's "reg", "reg-names" and "throttle-cfgs" + - | + thermal-sensor@700e2000 { + compatible = "nvidia,tegra132-soctherm"; + reg = <0x700e2000 0x600>, /* SOC_THERM reg_base */ + <0x70040000 0x200>; /* CCROC reg_base */ + reg-names = "soctherm-reg", "ccroc-reg"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + + throttle-cfgs { + /* + * When the "heavy" cooling device triggered, + * the HW will skip cpu clock's pulse in HIGH level + */ + heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; + + #cooling-cells = <2>; + }; + + /* + * When the "light" cooling device triggered, + * the HW will skip cpu clock's pulse in MED level + */ + light { + nvidia,priority = <80>; + nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>; + + #cooling-cells = <2>; + }; + + /* + * If these two devices are triggered in same time, the HW throttle + * arbiter will select the highest priority as the final throttle + * settings to skip cpu pulse. + */ + }; + }; + + # referring to thermal sensors + - | + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + + trips { + cpu_shutdown_trip: shutdown-trip { + temperature = <102500>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu_throttle_trip: throttle-trip { + temperature = <100000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_throttle_trip>; + cooling-device = <&throttle_heavy 1 1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml index 92762efc2120..5ff72ce5c887 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Limits Management Hardware(LMh) maintainers: - - Thara Gopinath <thara.gopinath@linaro.org> + - Thara Gopinath <thara.gopinath@gmail.com> description: Limits Management Hardware(LMh) is a hardware infrastructure on some diff --git a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt index 147ef3e74452..b02ab0af10ce 100644 --- a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt +++ b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt @@ -1,7 +1,7 @@ Synopsys ARC Local Timer with Interrupt Capabilities - Found on all ARC CPUs (ARC700/ARCHS) - Can be optionally programmed to interrupt on Limit -- Two idential copies TIMER0 and TIMER1 exist in ARC cores and historically +- Two identical copies TIMER0 and TIMER1 exist in ARC cores and historically TIMER0 used as clockevent provider (true for all ARC cores) TIMER1 used for clocksource (mandatory for ARC700, optional for ARC HS) diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index ba2bfb547909..cd58179ae337 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -119,6 +119,10 @@ properties: - fsl,mpr121 # Monolithic Power Systems Inc. multi-phase controller mp2888 - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2971 + - mps,mp2971 + # Monolithic Power Systems Inc. multi-phase controller mp2973 + - mps,mp2973 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 # Honeywell Humidicon HIH-6130 humidity/temperature sensor @@ -193,13 +197,13 @@ properties: - maxim,max1237 # Temperature Sensor, I2C interface - maxim,max1619 - # 10-bit 10 kOhm linear programable voltage divider + # 10-bit 10 kOhm linear programmable voltage divider - maxim,max5481 - # 10-bit 50 kOhm linear programable voltage divider + # 10-bit 50 kOhm linear programmable voltage divider - maxim,max5482 - # 10-bit 10 kOhm linear programable variable resistor + # 10-bit 10 kOhm linear programmable variable resistor - maxim,max5483 - # 10-bit 50 kOhm linear programable variable resistor + # 10-bit 50 kOhm linear programmable variable resistor - maxim,max5484 # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion - maxim,max6621 @@ -291,8 +295,6 @@ properties: - miramems,da311 # Temperature sensor with integrated fan control - national,lm63 - # I2C TEMP SENSOR - - national,lm75 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor - national,lm80 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor @@ -315,6 +317,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Renesas HS3001 Temperature and Relative Humidity Sensors + - renesas,hs3001 # Renesas ISL29501 time-of-flight sensor - renesas,isl29501 # Rohm DH2228FV diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index bdfa86a0cc98..462ead5a1cec 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -29,6 +29,7 @@ properties: - qcom,sa8775p-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc + - qcom,sm6115-ufshc - qcom,sm6350-ufshc - qcom,sm8150-ufshc - qcom,sm8250-ufshc @@ -79,6 +80,11 @@ properties: minItems: 1 maxItems: 2 + reg-names: + items: + - const: std + - const: ice + required-opps: maxItems: 1 @@ -134,6 +140,8 @@ allOf: reg: minItems: 1 maxItems: 1 + reg-names: + maxItems: 1 - if: properties: @@ -162,6 +170,10 @@ allOf: reg: minItems: 2 maxItems: 2 + reg-names: + minItems: 2 + required: + - reg-names - if: properties: @@ -190,6 +202,37 @@ allOf: reg: minItems: 1 maxItems: 1 + reg-names: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6115-ufshc + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + - const: ice_core_clk + reg: + minItems: 2 + maxItems: 2 + reg-names: + minItems: 2 + required: + - reg-names # TODO: define clock bindings for qcom,msm8994-ufshc @@ -274,5 +317,6 @@ examples: <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; }; }; diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml index 47a4e9e1a775..bbaee4f5f7b2 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-common.yaml +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml @@ -74,7 +74,7 @@ properties: Specifies max. load that can be drawn from VCCQ2 supply. dependencies: - freq-table-hz: [ 'clocks' ] + freq-table-hz: [ clocks ] required: - interrupts diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index 782402800d4a..91f135c3495b 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -167,7 +167,7 @@ properties: at RTL is 0, so this property only affects siTD. If this property is not set, the max packet size is 1023 bytes, and - if the total of packet size for pervious transactions are more than + if the total of packet size for previous transactions are more than 256 bytes, it can't accept any transactions within this frame. The use case is single transaction, but higher frame rate. diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml index 75eec4a9a020..89fc9a434d05 100644 --- a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml @@ -43,10 +43,8 @@ properties: patternProperties: '^connector@[01]$': $ref: /schemas/connector/usb-connector.yaml# - unevaluatedProperties: false - properties: - reg: - maxItems: 1 + required: + - reg required: - compatible diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml index 3fb4feb6d3d9..9ea1e4cd0709 100644 --- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -52,7 +52,7 @@ properties: fsl,permanently-attached: type: boolean description: - Indicates if the device atached to a downstream port is + Indicates if the device attached to a downstream port is permanently attached. fsl,disable-port-power-control: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index b956bb5fada7..f37191f21501 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -38,6 +38,7 @@ properties: - allwinner,sun8i-a83t-ehci - allwinner,sun8i-h3-ehci - allwinner,sun8i-r40-ehci + - allwinner,sun8i-v3s-ehci - allwinner,sun9i-a80-ehci - allwinner,sun20i-d1-ehci - aspeed,ast2400-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index be268e23ca79..b9576015736b 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -25,6 +25,7 @@ properties: - allwinner,sun8i-a83t-ohci - allwinner,sun8i-h3-ohci - allwinner,sun8i-r40-ohci + - allwinner,sun8i-v3s-ohci - allwinner,sun9i-a80-ohci - allwinner,sun20i-d1-ohci - brcm,bcm3384-ohci diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index cc4cf92b70d1..6378356727e1 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml# diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 8654a3ec23e4..afc30e98b123 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -53,7 +53,7 @@ Optional properties: - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual - SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex + SPDT USB Switch, witch is controlled by GPIO to de/multiplex D+/D- USB lines between connectors. - qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index 9309f003cd07..f0784d2e86da 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml# diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml index 4ced2f68e2a9..07bec1fe6ebf 100644 --- a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml +++ b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml @@ -10,7 +10,7 @@ maintainers: - ChiYuan Huang <cy_huang@richtek.com> description: | - The RT1719 is a sink-only USB Type-C contoller that complies with the latest + The RT1719 is a sink-only USB Type-C controller that complies with the latest USB Type-C and PD standards. It does the USB Type-C detection including attach and orientation. It integrates the physical layer of the USB BMC power delivery protocol to allow up to 100W of power. The BMC PD block enables full diff --git a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt deleted file mode 100644 index 0388634598ce..000000000000 --- a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt +++ /dev/null @@ -1,38 +0,0 @@ -Samsung High Speed USB OTG controller ------------------------------ - -The Samsung HSOTG IP can be found on Samsung SoCs, from S3C6400 onwards. -It gives functionality of OTG-compliant USB 2.0 host and device with -support for USB 2.0 high-speed (480Mbps) and full-speed (12 Mbps) -operation. - -Currently only device mode is supported. - -Binding details ------ - -Required properties: -- compatible: "samsung,s3c6400-hsotg" should be used for all currently - supported SoC, -- interrupts: specifier of interrupt signal of interrupt controller, - according to bindings of interrupt controller, -- clocks: contains an array of clock specifiers: - - first entry: OTG clock -- clock-names: contains array of clock names: - - first entry: must be "otg" -- vusb_d-supply: phandle to voltage regulator of digital section, -- vusb_a-supply: phandle to voltage regulator of analog section. - -Example ------ - - hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg"; - reg = <0x12480000 0x20000>; - interrupts = <0 71 0>; - clocks = <&clock 305>; - clock-names = "otg"; - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - }; - diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml index 88ea6c952c66..c2e29bd61e11 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml index 23a13e1d5c7a..76db9071b352 100644 --- a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml +++ b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/vialab,vl817.yaml# diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index af60bf1a6664..573578db9509 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -190,6 +190,8 @@ patternProperties: description: Compass Electronics Group, LLC "^beagle,.*": description: BeagleBoard.org Foundation + "^belling,.*": + description: Shanghai Belling Co., Ltd. "^bhf,.*": description: Beckhoff Automation GmbH & Co. KG "^bitmain,.*": @@ -617,6 +619,8 @@ patternProperties: description: Imagination Technologies Ltd. "^imi,.*": description: Integrated Micro-Electronics Inc. + "^inanbo,.*": + description: Shenzhen INANBO Electronic Technology Co., Ltd. "^incircuit,.*": description: In-Circuit GmbH "^indiedroid,.*": @@ -675,6 +679,8 @@ patternProperties: description: iWave Systems Technologies Pvt. Ltd. "^jadard,.*": description: Jadard Technology Inc. + "^jasonic,.*": + description: Jasonic Technology Ltd. "^jdi,.*": description: Japan Display Inc. "^jedec,.*": @@ -1151,6 +1157,8 @@ patternProperties: description: Shenzhen Roofull Technology Co, Ltd "^roseapplepi,.*": description: RoseapplePi.org + "^saef,.*": + description: Saef Technology Limited "^samsung,.*": description: Samsung Semiconductor "^samtec,.*": diff --git a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml new file mode 100644 index 000000000000..81690d4b62a6 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/loongson,ls1x-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1 Watchdog Timer + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - loongson,ls1b-wdt + - loongson,ls1c-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + watchdog: watchdog@1fe5c060 { + compatible = "loongson,ls1b-wdt"; + reg = <0x1fe5c060 0xc>; + + clocks = <&clkc LS1X_CLKID_APB>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml index 51d03d5b08ad..3e9fd49d935e 100644 --- a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml @@ -2,8 +2,8 @@ # Copyright 2020 Toshiba Electronic Devices & Storage Corporation %YAML 1.2 --- -$id: "http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Toshiba Visconti SoCs PIUWDT Watchdog timer diff --git a/Documentation/driver-api/media/dtv-common.rst b/Documentation/driver-api/media/dtv-common.rst index f8b2c4dc8170..207a22bcaf4a 100644 --- a/Documentation/driver-api/media/dtv-common.rst +++ b/Documentation/driver-api/media/dtv-common.rst @@ -3,15 +3,6 @@ Digital TV Common functions --------------------------- -Math functions -~~~~~~~~~~~~~~ - -Provide some commonly-used math functions, usually required in order to -estimate signal strength and signal to noise measurements in dB. - -.. kernel-doc:: include/media/dvb_math.h - - DVB devices ~~~~~~~~~~~ diff --git a/Documentation/driver-api/s390-drivers.rst b/Documentation/driver-api/s390-drivers.rst index 5158577bc29b..8c0845c4eee7 100644 --- a/Documentation/driver-api/s390-drivers.rst +++ b/Documentation/driver-api/s390-drivers.rst @@ -27,7 +27,7 @@ not strictly considered I/O devices. They are considered here as well, although they are not the focus of this document. Some additional information can also be found in the kernel source under -Documentation/s390/driver-model.rst. +Documentation/arch/s390/driver-model.rst. The css bus =========== @@ -38,7 +38,7 @@ into several categories: * Standard I/O subchannels, for use by the system. They have a child device on the ccw bus and are described below. * I/O subchannels bound to the vfio-ccw driver. See - Documentation/s390/vfio-ccw.rst. + Documentation/arch/s390/vfio-ccw.rst. * Message subchannels. No Linux driver currently exists. * CHSC subchannels (at most one). The chsc subchannel driver can be used to send asynchronous chsc commands. diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index 7f049c251a79..76208db88f3b 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -9,7 +9,7 @@ | alpha: | TODO | | arc: | TODO | | arm: | TODO | - | arm64: | N/A | + | arm64: | ok | | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst index eccd327e6df5..a624e92f2687 100644 --- a/Documentation/filesystems/fscrypt.rst +++ b/Documentation/filesystems/fscrypt.rst @@ -332,54 +332,121 @@ Encryption modes and usage fscrypt allows one encryption mode to be specified for file contents and one encryption mode to be specified for filenames. Different directory trees are permitted to use different encryption modes. + +Supported modes +--------------- + Currently, the following pairs of encryption modes are supported: - AES-256-XTS for contents and AES-256-CTS-CBC for filenames -- AES-128-CBC for contents and AES-128-CTS-CBC for filenames +- AES-256-XTS for contents and AES-256-HCTR2 for filenames - Adiantum for both contents and filenames -- AES-256-XTS for contents and AES-256-HCTR2 for filenames (v2 policies only) -- SM4-XTS for contents and SM4-CTS-CBC for filenames (v2 policies only) - -If unsure, you should use the (AES-256-XTS, AES-256-CTS-CBC) pair. - -AES-128-CBC was added only for low-powered embedded devices with -crypto accelerators such as CAAM or CESA that do not support XTS. To -use AES-128-CBC, CONFIG_CRYPTO_ESSIV and CONFIG_CRYPTO_SHA256 (or -another SHA-256 implementation) must be enabled so that ESSIV can be -used. - -Adiantum is a (primarily) stream cipher-based mode that is fast even -on CPUs without dedicated crypto instructions. It's also a true -wide-block mode, unlike XTS. It can also eliminate the need to derive -per-file encryption keys. However, it depends on the security of two -primitives, XChaCha12 and AES-256, rather than just one. See the -paper "Adiantum: length-preserving encryption for entry-level -processors" (https://eprint.iacr.org/2018/720.pdf) for more details. -To use Adiantum, CONFIG_CRYPTO_ADIANTUM must be enabled. Also, fast -implementations of ChaCha and NHPoly1305 should be enabled, e.g. -CONFIG_CRYPTO_CHACHA20_NEON and CONFIG_CRYPTO_NHPOLY1305_NEON for ARM. - -AES-256-HCTR2 is another true wide-block encryption mode that is intended for -use on CPUs with dedicated crypto instructions. AES-256-HCTR2 has the property -that a bitflip in the plaintext changes the entire ciphertext. This property -makes it desirable for filename encryption since initialization vectors are -reused within a directory. For more details on AES-256-HCTR2, see the paper -"Length-preserving encryption with HCTR2" -(https://eprint.iacr.org/2021/1441.pdf). To use AES-256-HCTR2, -CONFIG_CRYPTO_HCTR2 must be enabled. Also, fast implementations of XCTR and -POLYVAL should be enabled, e.g. CRYPTO_POLYVAL_ARM64_CE and -CRYPTO_AES_ARM64_CE_BLK for ARM64. - -SM4 is a Chinese block cipher that is an alternative to AES. It has -not seen as much security review as AES, and it only has a 128-bit key -size. It may be useful in cases where its use is mandated. -Otherwise, it should not be used. For SM4 support to be available, it -also needs to be enabled in the kernel crypto API. - -New encryption modes can be added relatively easily, without changes -to individual filesystems. However, authenticated encryption (AE) -modes are not currently supported because of the difficulty of dealing -with ciphertext expansion. +- AES-128-CBC-ESSIV for contents and AES-128-CTS-CBC for filenames +- SM4-XTS for contents and SM4-CTS-CBC for filenames + +Authenticated encryption modes are not currently supported because of +the difficulty of dealing with ciphertext expansion. Therefore, +contents encryption uses a block cipher in `XTS mode +<https://en.wikipedia.org/wiki/Disk_encryption_theory#XTS>`_ or +`CBC-ESSIV mode +<https://en.wikipedia.org/wiki/Disk_encryption_theory#Encrypted_salt-sector_initialization_vector_(ESSIV)>`_, +or a wide-block cipher. Filenames encryption uses a +block cipher in `CTS-CBC mode +<https://en.wikipedia.org/wiki/Ciphertext_stealing>`_ or a wide-block +cipher. + +The (AES-256-XTS, AES-256-CTS-CBC) pair is the recommended default. +It is also the only option that is *guaranteed* to always be supported +if the kernel supports fscrypt at all; see `Kernel config options`_. + +The (AES-256-XTS, AES-256-HCTR2) pair is also a good choice that +upgrades the filenames encryption to use a wide-block cipher. (A +*wide-block cipher*, also called a tweakable super-pseudorandom +permutation, has the property that changing one bit scrambles the +entire result.) As described in `Filenames encryption`_, a wide-block +cipher is the ideal mode for the problem domain, though CTS-CBC is the +"least bad" choice among the alternatives. For more information about +HCTR2, see `the HCTR2 paper <https://eprint.iacr.org/2021/1441.pdf>`_. + +Adiantum is recommended on systems where AES is too slow due to lack +of hardware acceleration for AES. Adiantum is a wide-block cipher +that uses XChaCha12 and AES-256 as its underlying components. Most of +the work is done by XChaCha12, which is much faster than AES when AES +acceleration is unavailable. For more information about Adiantum, see +`the Adiantum paper <https://eprint.iacr.org/2018/720.pdf>`_. + +The (AES-128-CBC-ESSIV, AES-128-CTS-CBC) pair exists only to support +systems whose only form of AES acceleration is an off-CPU crypto +accelerator such as CAAM or CESA that does not support XTS. + +The remaining mode pairs are the "national pride ciphers": + +- (SM4-XTS, SM4-CTS-CBC) + +Generally speaking, these ciphers aren't "bad" per se, but they +receive limited security review compared to the usual choices such as +AES and ChaCha. They also don't bring much new to the table. It is +suggested to only use these ciphers where their use is mandated. + +Kernel config options +--------------------- + +Enabling fscrypt support (CONFIG_FS_ENCRYPTION) automatically pulls in +only the basic support from the crypto API needed to use AES-256-XTS +and AES-256-CTS-CBC encryption. For optimal performance, it is +strongly recommended to also enable any available platform-specific +kconfig options that provide acceleration for the algorithm(s) you +wish to use. Support for any "non-default" encryption modes typically +requires extra kconfig options as well. + +Below, some relevant options are listed by encryption mode. Note, +acceleration options not listed below may be available for your +platform; refer to the kconfig menus. File contents encryption can +also be configured to use inline encryption hardware instead of the +kernel crypto API (see `Inline encryption support`_); in that case, +the file contents mode doesn't need to supported in the kernel crypto +API, but the filenames mode still does. + +- AES-256-XTS and AES-256-CTS-CBC + - Recommended: + - arm64: CONFIG_CRYPTO_AES_ARM64_CE_BLK + - x86: CONFIG_CRYPTO_AES_NI_INTEL + +- AES-256-HCTR2 + - Mandatory: + - CONFIG_CRYPTO_HCTR2 + - Recommended: + - arm64: CONFIG_CRYPTO_AES_ARM64_CE_BLK + - arm64: CONFIG_CRYPTO_POLYVAL_ARM64_CE + - x86: CONFIG_CRYPTO_AES_NI_INTEL + - x86: CONFIG_CRYPTO_POLYVAL_CLMUL_NI + +- Adiantum + - Mandatory: + - CONFIG_CRYPTO_ADIANTUM + - Recommended: + - arm32: CONFIG_CRYPTO_CHACHA20_NEON + - arm32: CONFIG_CRYPTO_NHPOLY1305_NEON + - arm64: CONFIG_CRYPTO_CHACHA20_NEON + - arm64: CONFIG_CRYPTO_NHPOLY1305_NEON + - x86: CONFIG_CRYPTO_CHACHA20_X86_64 + - x86: CONFIG_CRYPTO_NHPOLY1305_SSE2 + - x86: CONFIG_CRYPTO_NHPOLY1305_AVX2 + +- AES-128-CBC-ESSIV and AES-128-CTS-CBC: + - Mandatory: + - CONFIG_CRYPTO_ESSIV + - CONFIG_CRYPTO_SHA256 or another SHA-256 implementation + - Recommended: + - AES-CBC acceleration + +fscrypt also uses HMAC-SHA512 for key derivation, so enabling SHA-512 +acceleration is recommended: + +- SHA-512 + - Recommended: + - arm64: CONFIG_CRYPTO_SHA512_ARM64_CE + - x86: CONFIG_CRYPTO_SHA512_SSSE3 Contents encryption ------------------- @@ -493,7 +560,14 @@ This structure must be initialized as follows: be set to constants from ``<linux/fscrypt.h>`` which identify the encryption modes to use. If unsure, use FSCRYPT_MODE_AES_256_XTS (1) for ``contents_encryption_mode`` and FSCRYPT_MODE_AES_256_CTS - (4) for ``filenames_encryption_mode``. + (4) for ``filenames_encryption_mode``. For details, see `Encryption + modes and usage`_. + + v1 encryption policies only support three combinations of modes: + (FSCRYPT_MODE_AES_256_XTS, FSCRYPT_MODE_AES_256_CTS), + (FSCRYPT_MODE_AES_128_CBC, FSCRYPT_MODE_AES_128_CTS), and + (FSCRYPT_MODE_ADIANTUM, FSCRYPT_MODE_ADIANTUM). v2 policies support + all combinations documented in `Supported modes`_. - ``flags`` contains optional flags from ``<linux/fscrypt.h>``: diff --git a/Documentation/filesystems/fsverity.rst b/Documentation/filesystems/fsverity.rst index cb845e8e5435..13e4b18e5dbb 100644 --- a/Documentation/filesystems/fsverity.rst +++ b/Documentation/filesystems/fsverity.rst @@ -326,6 +326,8 @@ the file has fs-verity enabled. This can perform better than FS_IOC_GETFLAGS and FS_IOC_MEASURE_VERITY because it doesn't require opening the file, and opening verity files can be expensive. +.. _accessing_verity_files: + Accessing verity files ====================== diff --git a/Documentation/filesystems/idmappings.rst b/Documentation/filesystems/idmappings.rst index 9700fdff411d..ac0af679e61e 100644 --- a/Documentation/filesystems/idmappings.rst +++ b/Documentation/filesystems/idmappings.rst @@ -146,9 +146,10 @@ For the rest of this document we will prefix all userspace ids with ``u`` and all kernel ids with ``k``. Ranges of idmappings will be prefixed with ``r``. So an idmapping will be written as ``u0:k10000:r10000``. -For example, the id ``u1000`` is an id in the upper idmapset or "userspace -idmapset" starting with ``u1000``. And it is mapped to ``k11000`` which is a -kernel id in the lower idmapset or "kernel idmapset" starting with ``k10000``. +For example, within this idmapping, the id ``u1000`` is an id in the upper +idmapset or "userspace idmapset" starting with ``u0``. And it is mapped to +``k11000`` which is a kernel id in the lower idmapset or "kernel idmapset" +starting with ``k10000``. A kernel id is always created by an idmapping. Such idmappings are associated with user namespaces. Since we mainly care about how idmappings work we're not @@ -373,6 +374,13 @@ kernel maps the caller's userspace id down into a kernel id according to the caller's idmapping and then maps that kernel id up according to the filesystem's idmapping. +From the implementation point it's worth mentioning how idmappings are represented. +All idmappings are taken from the corresponding user namespace. + + - caller's idmapping (usually taken from ``current_user_ns()``) + - filesystem's idmapping (``sb->s_user_ns``) + - mount's idmapping (``mnt_idmap(vfsmnt)``) + Let's see some examples with caller/filesystem idmapping but without mount idmappings. This will exhibit some problems we can hit. After that we will revisit/reconsider these examples, this time using mount idmappings, to see how diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index eb252fc972aa..09cade7eaefc 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -122,6 +122,7 @@ Documentation for filesystem implementations. virtiofs vfat xfs-delayed-logging-design + xfs-maintainer-entry-profile xfs-self-describing-metadata xfs-online-fsck-design zonefs diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst index 3479be0935c6..7be2900806c8 100644 --- a/Documentation/filesystems/locking.rst +++ b/Documentation/filesystems/locking.rst @@ -85,13 +85,14 @@ prototypes:: struct dentry *dentry, struct fileattr *fa); int (*fileattr_get)(struct dentry *dentry, struct fileattr *fa); struct posix_acl * (*get_acl)(struct mnt_idmap *, struct dentry *, int); + struct offset_ctx *(*get_offset_ctx)(struct inode *inode); locking rules: all may block -============== ============================================= +============== ================================================== ops i_rwsem(inode) -============== ============================================= +============== ================================================== lookup: shared create: exclusive link: exclusive (both) @@ -115,7 +116,8 @@ atomic_open: shared (exclusive if O_CREAT is set in open flags) tmpfile: no fileattr_get: no or exclusive fileattr_set: exclusive -============== ============================================= +get_offset_ctx no +============== ================================================== Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem @@ -374,10 +376,17 @@ invalidate_lock before invalidating page cache in truncate / hole punch path (and thus calling into ->invalidate_folio) to block races between page cache invalidation and page cache filling functions (fault, read, ...). -->release_folio() is called when the kernel is about to try to drop the -buffers from the folio in preparation for freeing it. It returns false to -indicate that the buffers are (or may be) freeable. If ->release_folio is -NULL, the kernel assumes that the fs has no private interest in the buffers. +->release_folio() is called when the MM wants to make a change to the +folio that would invalidate the filesystem's private data. For example, +it may be about to be removed from the address_space or split. The folio +is locked and not under writeback. It may be dirty. The gfp parameter +is not usually used for allocation, but rather to indicate what the +filesystem may do to attempt to free the private data. The filesystem may +return false to indicate that the folio's private data cannot be freed. +If it returns true, it should have already removed the private data from +the folio. If a filesystem does not provide a ->release_folio method, +the pagecache will assume that private data is buffer_heads and call +try_to_free_buffers(). ->free_folio() is called when the kernel has dropped the folio from the page cache. @@ -550,9 +559,8 @@ mutex or just to use i_size_read() instead. Note: this does not protect the file->f_pos against concurrent modifications since this is something the userspace has to take care about. -->iterate() is called with i_rwsem exclusive. - -->iterate_shared() is called with i_rwsem at least shared. +->iterate_shared() is called with i_rwsem held for reading, and with the +file f_pos_lock held exclusively ->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags. Most instances call fasync_helper(), which does that maintenance, so it's @@ -627,26 +635,29 @@ vm_operations_struct prototypes:: - void (*open)(struct vm_area_struct*); - void (*close)(struct vm_area_struct*); - vm_fault_t (*fault)(struct vm_area_struct*, struct vm_fault *); + void (*open)(struct vm_area_struct *); + void (*close)(struct vm_area_struct *); + vm_fault_t (*fault)(struct vm_fault *); + vm_fault_t (*huge_fault)(struct vm_fault *, unsigned int order); + vm_fault_t (*map_pages)(struct vm_fault *, pgoff_t start, pgoff_t end); vm_fault_t (*page_mkwrite)(struct vm_area_struct *, struct vm_fault *); vm_fault_t (*pfn_mkwrite)(struct vm_area_struct *, struct vm_fault *); int (*access)(struct vm_area_struct *, unsigned long, void*, int, int); locking rules: -============= ========= =========================== +============= ========== =========================== ops mmap_lock PageLocked(page) -============= ========= =========================== -open: yes -close: yes -fault: yes can return with page locked -map_pages: read -page_mkwrite: yes can return with page locked -pfn_mkwrite: yes -access: yes -============= ========= =========================== +============= ========== =========================== +open: write +close: read/write +fault: read can return with page locked +huge_fault: maybe-read +map_pages: maybe-read +page_mkwrite: read can return with page locked +pfn_mkwrite: read +access: read +============= ========== =========================== ->fault() is called when a previously not present pte is about to be faulted in. The filesystem must find and return the page associated with the passed in @@ -656,11 +667,18 @@ then ensure the page is not already truncated (invalidate_lock will block subsequent truncate), and then return with VM_FAULT_LOCKED, and the page locked. The VM will unlock the page. +->huge_fault() is called when there is no PUD or PMD entry present. This +gives the filesystem the opportunity to install a PUD or PMD sized page. +Filesystems can also use the ->fault method to return a PMD sized page, +so implementing this function may not be necessary. In particular, +filesystems should not call filemap_fault() from ->huge_fault(). +The mmap_lock may not be held when this method is called. + ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "start_pgoff" till "end_pgoff". ->map_pages() is called with the RCU lock held and must not block. If it's not possible to reach a page without blocking, -filesystem should skip it. Filesystem should use do_set_pte() to setup +filesystem should skip it. Filesystem should use set_pte_range() to setup page table entry. Pointer to entry associated with the page is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst index cc4761599ac9..cdefbe73d85c 100644 --- a/Documentation/filesystems/overlayfs.rst +++ b/Documentation/filesystems/overlayfs.rst @@ -405,6 +405,53 @@ when a "metacopy" file in one of the lower layers above it, has a "redirect" to the absolute path of the "lower data" file in the "data-only" lower layer. +fs-verity support +---------------------- + +During metadata copy up of a lower file, if the source file has +fs-verity enabled and overlay verity support is enabled, then the +digest of the lower file is added to the "trusted.overlay.metacopy" +xattr. This is then used to verify the content of the lower file +each the time the metacopy file is opened. + +When a layer containing verity xattrs is used, it means that any such +metacopy file in the upper layer is guaranteed to match the content +that was in the lower at the time of the copy-up. If at any time +(during a mount, after a remount, etc) such a file in the lower is +replaced or modified in any way, access to the corresponding file in +overlayfs will result in EIO errors (either on open, due to overlayfs +digest check, or from a later read due to fs-verity) and a detailed +error is printed to the kernel logs. For more details of how fs-verity +file access works, see :ref:`Documentation/filesystems/fsverity.rst +<accessing_verity_files>`. + +Verity can be used as a general robustness check to detect accidental +changes in the overlayfs directories in use. But, with additional care +it can also give more powerful guarantees. For example, if the upper +layer is fully trusted (by using dm-verity or something similar), then +an untrusted lower layer can be used to supply validated file content +for all metacopy files. If additionally the untrusted lower +directories are specified as "Data-only", then they can only supply +such file content, and the entire mount can be trusted to match the +upper layer. + +This feature is controlled by the "verity" mount option, which +supports these values: + +- "off": + The metacopy digest is never generated or used. This is the + default if verity option is not specified. +- "on": + Whenever a metacopy files specifies an expected digest, the + corresponding data file must match the specified digest. When + generating a metacopy file the verity digest will be set in it + based on the source file (if it has one). +- "require": + Same as "on", but additionally all metacopy files must specify a + digest (or EIO is returned on open). This means metadata copy up + will only be used if the data file has fs-verity enabled, + otherwise a full copy-up is used. + Sharing and copying layers -------------------------- @@ -610,6 +657,31 @@ can be useful in case the underlying disk is copied and the UUID of this copy is changed. This is only applicable if all lower/upper/work directories are on the same filesystem, otherwise it will fallback to normal behaviour. + +UUID and fsid +------------- + +The UUID of overlayfs instance itself and the fsid reported by statfs(2) are +controlled by the "uuid" mount option, which supports these values: + +- "null": + UUID of overlayfs is null. fsid is taken from upper most filesystem. +- "off": + UUID of overlayfs is null. fsid is taken from upper most filesystem. + UUID of underlying layers is ignored. +- "on": + UUID of overlayfs is generated and used to report a unique fsid. + UUID is stored in xattr "trusted.overlay.uuid", making overlayfs fsid + unique and persistent. This option requires an overlayfs with upper + filesystem that supports xattrs. +- "auto": (default) + UUID is taken from xattr "trusted.overlay.uuid" if it exists. + Upgrade to "uuid=on" on first time mount of new overlay filesystem that + meets the prerequites. + Downgrade to "uuid=null" for existing overlay filesystems that were never + mounted with "uuid=on". + + Volatile mount -------------- diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst index ffafd93001df..deac4e973ddc 100644 --- a/Documentation/filesystems/porting.rst +++ b/Documentation/filesystems/porting.rst @@ -537,7 +537,7 @@ vfs_readdir() is gone; switch to iterate_dir() instead **mandatory** -->readdir() is gone now; switch to ->iterate() +->readdir() is gone now; switch to ->iterate_shared() **mandatory** @@ -693,24 +693,19 @@ parallel now. --- -**recommended** +**mandatory** -->iterate_shared() is added; it's a parallel variant of ->iterate(). +->iterate_shared() is added. Exclusion on struct file level is still provided (as well as that between it and lseek on the same struct file), but if your directory has been opened several times, you can get these called in parallel. Exclusion between that method and all directory-modifying ones is still provided, of course. -Often enough ->iterate() can serve as ->iterate_shared() without any -changes - it is a read-only operation, after all. If you have any -per-inode or per-dentry in-core data structures modified by ->iterate(), -you might need something to serialize the access to them. If you -do dcache pre-seeding, you'll need to switch to d_alloc_parallel() for -that; look for in-tree examples. - -Old method is only used if the new one is absent; eventually it will -be removed. Switch while you still can; the old one won't stay. +If you have any per-inode or per-dentry in-core data structures modified +by ->iterate_shared(), you might need something to serialize the access +to them. If you do dcache pre-seeding, you'll need to switch to +d_alloc_parallel() for that; look for in-tree examples. --- @@ -930,9 +925,9 @@ should be done by looking at FMODE_LSEEK in file->f_mode. filldir_t (readdir callbacks) calling conventions have changed. Instead of returning 0 or -E... it returns bool now. false means "no more" (as -E... used to) and true - "keep going" (as 0 in old calling conventions). Rationale: -callers never looked at specific -E... values anyway. ->iterate() and -->iterate_shared() instance require no changes at all, all filldir_t ones in -the tree converted. +callers never looked at specific -E... values anyway. -> iterate_shared() +instances require no changes at all, all filldir_t ones in the tree +converted. --- @@ -943,3 +938,14 @@ file pointer instead of struct dentry pointer. d_tmpfile() is similarly changed to simplify callers. The passed file is in a non-open state and on success must be opened before returning (e.g. by calling finish_open_simple()). + +--- + +**mandatory** + +Calling convention for ->huge_fault has changed. It now takes a page +order instead of an enum page_entry_size, and it may be called without the +mmap_lock held. All in-tree users have been audited and do not seem to +depend on the mmap_lock being held, but out of tree users should verify +for themselves. If they do need it, they can return VM_FAULT_RETRY to +be called with the mmap_lock held. diff --git a/Documentation/filesystems/tmpfs.rst b/Documentation/filesystems/tmpfs.rst index f18f46be5c0c..56a26c843dbe 100644 --- a/Documentation/filesystems/tmpfs.rst +++ b/Documentation/filesystems/tmpfs.rst @@ -21,8 +21,8 @@ explained further below, some of which can be reconfigured dynamically on the fly using a remount ('mount -o remount ...') of the filesystem. A tmpfs filesystem can be resized but it cannot be resized to a size below its current usage. tmpfs also supports POSIX ACLs, and extended attributes for the -trusted.* and security.* namespaces. ramfs does not use swap and you cannot -modify any parameter for a ramfs filesystem. The size limit of a ramfs +trusted.*, security.* and user.* namespaces. ramfs does not use swap and you +cannot modify any parameter for a ramfs filesystem. The size limit of a ramfs filesystem is how much memory you have available, and so care must be taken if used so to not run out of memory. @@ -84,8 +84,6 @@ nr_inodes The maximum number of inodes for this instance. The default is half of the number of your physical RAM pages, or (on a machine with highmem) the number of lowmem RAM pages, whichever is the lower. -noswap Disables swap. Remounts must respect the original settings. - By default swap is enabled. ========= ============================================================ These parameters accept a suffix k, m or g for kilo, mega and giga and @@ -99,36 +97,65 @@ mount with such options, since it allows any user with write access to use up all the memory on the machine; but enhances the scalability of that instance in a system with many CPUs making intensive use of it. +If nr_inodes is not 0, that limited space for inodes is also used up by +extended attributes: "df -i"'s IUsed and IUse% increase, IFree decreases. + +tmpfs blocks may be swapped out, when there is a shortage of memory. +tmpfs has a mount option to disable its use of swap: + +====== =========================================================== +noswap Disables swap. Remounts must respect the original settings. + By default swap is enabled. +====== =========================================================== + tmpfs also supports Transparent Huge Pages which requires a kernel configured with CONFIG_TRANSPARENT_HUGEPAGE and with huge supported for your system (has_transparent_hugepage(), which is architecture specific). The mount options for this are: -====== ============================================================ -huge=0 never: disables huge pages for the mount -huge=1 always: enables huge pages for the mount -huge=2 within_size: only allocate huge pages if the page will be - fully within i_size, also respect fadvise()/madvise() hints. -huge=3 advise: only allocate huge pages if requested with - fadvise()/madvise() -====== ============================================================ - -There is a sysfs file which you can also use to control system wide THP -configuration for all tmpfs mounts, the file is: - -/sys/kernel/mm/transparent_hugepage/shmem_enabled - -This sysfs file is placed on top of THP sysfs directory and so is registered -by THP code. It is however only used to control all tmpfs mounts with one -single knob. Since it controls all tmpfs mounts it should only be used either -for emergency or testing purposes. The values you can set for shmem_enabled are: - -== ============================================================ --1 deny: disables huge on shm_mnt and all mounts, for - emergency use --2 force: enables huge on shm_mnt and all mounts, w/o needing - option, for testing -== ============================================================ +================ ============================================================== +huge=never Do not allocate huge pages. This is the default. +huge=always Attempt to allocate huge page every time a new page is needed. +huge=within_size Only allocate huge page if it will be fully within i_size. + Also respect madvise(2) hints. +huge=advise Only allocate huge page if requested with madvise(2). +================ ============================================================== + +See also Documentation/admin-guide/mm/transhuge.rst, which describes the +sysfs file /sys/kernel/mm/transparent_hugepage/shmem_enabled: which can +be used to deny huge pages on all tmpfs mounts in an emergency, or to +force huge pages on all tmpfs mounts for testing. + +tmpfs also supports quota with the following mount options + +======================== ================================================= +quota User and group quota accounting and enforcement + is enabled on the mount. Tmpfs is using hidden + system quota files that are initialized on mount. +usrquota User quota accounting and enforcement is enabled + on the mount. +grpquota Group quota accounting and enforcement is enabled + on the mount. +usrquota_block_hardlimit Set global user quota block hard limit. +usrquota_inode_hardlimit Set global user quota inode hard limit. +grpquota_block_hardlimit Set global group quota block hard limit. +grpquota_inode_hardlimit Set global group quota inode hard limit. +======================== ================================================= + +None of the quota related mount options can be set or changed on remount. + +Quota limit parameters accept a suffix k, m or g for kilo, mega and giga +and can't be changed on remount. Default global quota limits are taking +effect for any and all user/group/project except root the first time the +quota entry for user/group/project id is being accessed - typically the +first time an inode with a particular id ownership is being created after +the mount. In other words, instead of the limits being initialized to zero, +they are initialized with the particular value provided with these mount +options. The limits can be changed for any user/group id at any time as they +normally can be. + +Note that tmpfs quotas do not support user namespaces so no uid/gid +translation is done if quotas are enabled inside user namespaces. tmpfs has a mount option to set the NUMA memory allocation policy for all files in that instance (if CONFIG_NUMA is enabled) - which can be diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst index 0c6b86d3e8f1..99acc2e98673 100644 --- a/Documentation/filesystems/vfs.rst +++ b/Documentation/filesystems/vfs.rst @@ -260,9 +260,11 @@ filesystem. The following members are defined: void (*evict_inode) (struct inode *); void (*put_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); - int (*freeze_super) (struct super_block *); + int (*freeze_super) (struct super_block *sb, + enum freeze_holder who); int (*freeze_fs) (struct super_block *); - int (*thaw_super) (struct super_block *); + int (*thaw_super) (struct super_block *sb, + enum freeze_wholder who); int (*unfreeze_fs) (struct super_block *); int (*statfs) (struct dentry *, struct kstatfs *); int (*remount_fs) (struct super_block *, int *, char *); @@ -515,6 +517,7 @@ As of kernel 2.6.22, the following members are defined: int (*fileattr_set)(struct mnt_idmap *idmap, struct dentry *dentry, struct fileattr *fa); int (*fileattr_get)(struct dentry *dentry, struct fileattr *fa); + struct offset_ctx *(*get_offset_ctx)(struct inode *inode); }; Again, all methods are called without any locks being held, unless @@ -675,7 +678,10 @@ otherwise noted. called on ioctl(FS_IOC_SETFLAGS) and ioctl(FS_IOC_FSSETXATTR) to change miscellaneous file flags and attributes. Callers hold i_rwsem exclusive. If unset, then fall back to f_op->ioctl(). - +``get_offset_ctx`` + called to get the offset context for a directory inode. A + filesystem must define this operation to use + simple_offset_dir_operations. The Address Space Object ======================== diff --git a/Documentation/filesystems/xfs-maintainer-entry-profile.rst b/Documentation/filesystems/xfs-maintainer-entry-profile.rst new file mode 100644 index 000000000000..32b6ac4ca9d6 --- /dev/null +++ b/Documentation/filesystems/xfs-maintainer-entry-profile.rst @@ -0,0 +1,194 @@ +XFS Maintainer Entry Profile +============================ + +Overview +-------- +XFS is a well known high-performance filesystem in the Linux kernel. +The aim of this project is to provide and maintain a robust and +performant filesystem. + +Patches are generally merged to the for-next branch of the appropriate +git repository. +After a testing period, the for-next branch is merged to the master +branch. + +Kernel code are merged to the xfs-linux tree[0]. +Userspace code are merged to the xfsprogs tree[1]. +Test cases are merged to the xfstests tree[2]. +Ondisk format documentation are merged to the xfs-documentation tree[3]. + +All patchsets involving XFS *must* be cc'd in their entirety to the mailing +list linux-xfs@vger.kernel.org. + +Roles +----- +There are eight key roles in the XFS project. +A person can take on multiple roles, and a role can be filled by +multiple people. +Anyone taking on a role is advised to check in with themselves and +others on a regular basis about burnout. + +- **Outside Contributor**: Anyone who sends a patch but is not involved + in the XFS project on a regular basis. + These folks are usually people who work on other filesystems or + elsewhere in the kernel community. + +- **Developer**: Someone who is familiar with the XFS codebase enough to + write new code, documentation, and tests. + + Developers can often be found in the IRC channel mentioned by the ``C:`` + entry in the kernel MAINTAINERS file. + +- **Senior Developer**: A developer who is very familiar with at least + some part of the XFS codebase and/or other subsystems in the kernel. + These people collectively decide the long term goals of the project + and nudge the community in that direction. + They should help prioritize development and review work for each release + cycle. + + Senior developers tend to be more active participants in the IRC channel. + +- **Reviewer**: Someone (most likely also a developer) who reads code + submissions to decide: + + 0. Is the idea behind the contribution sound? + 1. Does the idea fit the goals of the project? + 2. Is the contribution designed correctly? + 3. Is the contribution polished? + 4. Can the contribution be tested effectively? + + Reviewers should identify themselves with an ``R:`` entry in the kernel + and fstests MAINTAINERS files. + +- **Testing Lead**: This person is responsible for setting the test + coverage goals of the project, negotiating with developers to decide + on new tests for new features, and making sure that developers and + release managers execute on the testing. + + The testing lead should identify themselves with an ``M:`` entry in + the XFS section of the fstests MAINTAINERS file. + +- **Bug Triager**: Someone who examines incoming bug reports in just + enough detail to identify the person to whom the report should be + forwarded. + + The bug triagers should identify themselves with a ``B:`` entry in + the kernel MAINTAINERS file. + +- **Release Manager**: This person merges reviewed patchsets into an + integration branch, tests the result locally, pushes the branch to a + public git repository, and sends pull requests further upstream. + The release manager is not expected to work on new feature patchsets. + If a developer and a reviewer fail to reach a resolution on some point, + the release manager must have the ability to intervene to try to drive a + resolution. + + The release manager should identify themselves with an ``M:`` entry in + the kernel MAINTAINERS file. + +- **Community Manager**: This person calls and moderates meetings of as many + XFS participants as they can get when mailing list discussions prove + insufficient for collective decisionmaking. + They may also serve as liaison between managers of the organizations + sponsoring work on any part of XFS. + +- **LTS Maintainer**: Someone who backports and tests bug fixes from + uptream to the LTS kernels. + There tend to be six separate LTS trees at any given time. + + The maintainer for a given LTS release should identify themselves with an + ``M:`` entry in the MAINTAINERS file for that LTS tree. + Unmaintained LTS kernels should be marked with status ``S: Orphan`` in that + same file. + +Submission Checklist Addendum +----------------------------- +Please follow these additional rules when submitting to XFS: + +- Patches affecting only the filesystem itself should be based against + the latest -rc or the for-next branch. + These patches will be merged back to the for-next branch. + +- Authors of patches touching other subsystems need to coordinate with + the maintainers of XFS and the relevant subsystems to decide how to + proceed with a merge. + +- Any patchset changing XFS should be cc'd in its entirety to linux-xfs. + Do not send partial patchsets; that makes analysis of the broader + context of the changes unnecessarily difficult. + +- Anyone making kernel changes that have corresponding changes to the + userspace utilities should send the userspace changes as separate + patchsets immediately after the kernel patchsets. + +- Authors of bug fix patches are expected to use fstests[2] to perform + an A/B test of the patch to determine that there are no regressions. + When possible, a new regression test case should be written for + fstests. + +- Authors of new feature patchsets must ensure that fstests will have + appropriate functional and input corner-case test cases for the new + feature. + +- When implementing a new feature, it is strongly suggested that the + developers write a design document to answer the following questions: + + * **What** problem is this trying to solve? + + * **Who** will benefit from this solution, and **where** will they + access it? + + * **How** will this new feature work? This should touch on major data + structures and algorithms supporting the solution at a higher level + than code comments. + + * **What** userspace interfaces are necessary to build off of the new + features? + + * **How** will this work be tested to ensure that it solves the + problems laid out in the design document without causing new + problems? + + The design document should be committed in the kernel documentation + directory. + It may be omitted if the feature is already well known to the + community. + +- Patchsets for the new tests should be submitted as separate patchsets + immediately after the kernel and userspace code patchsets. + +- Changes to the on-disk format of XFS must be described in the ondisk + format document[3] and submitted as a patchset after the fstests + patchsets. + +- Patchsets implementing bug fixes and further code cleanups should put + the bug fixes at the beginning of the series to ease backporting. + +Key Release Cycle Dates +----------------------- +Bug fixes may be sent at any time, though the release manager may decide to +defer a patch when the next merge window is close. + +Code submissions targeting the next merge window should be sent between +-rc1 and -rc6. +This gives the community time to review the changes, to suggest other changes, +and for the author to retest those changes. + +Code submissions also requiring changes to fs/iomap and targeting the +next merge window should be sent between -rc1 and -rc4. +This allows the broader kernel community adequate time to test the +infrastructure changes. + +Review Cadence +-------------- +In general, please wait at least one week before pinging for feedback. +To find reviewers, either consult the MAINTAINERS file, or ask +developers that have Reviewed-by tags for XFS changes to take a look and +offer their opinion. + +References +---------- +| [0] https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git/ +| [1] https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/ +| [2] https://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git/ +| [3] https://git.kernel.org/pub/scm/fs/xfs/xfs-documentation.git/ diff --git a/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst b/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst index f37fc90ce340..89419e116413 100644 --- a/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst +++ b/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst @@ -5,9 +5,8 @@ Chrome OS ACPI Device ===================== Hardware functionality specific to Chrome OS is exposed through a Chrome OS ACPI device. -The plug and play ID of a Chrome OS ACPI device is GGL0001. GGL is a valid PNP ID of Google. -PNP ID can be used with the ACPI devices according to the guidelines. The following ACPI -objects are supported: +The plug and play ID of a Chrome OS ACPI device is GGL0001 and the hardware ID is +GOOG0016. The following ACPI objects are supported: .. flat-table:: Supported ACPI Objects :widths: 1 2 diff --git a/Documentation/gpu/amdgpu/flashing.rst b/Documentation/gpu/amdgpu/flashing.rst new file mode 100644 index 000000000000..bd745c42a538 --- /dev/null +++ b/Documentation/gpu/amdgpu/flashing.rst @@ -0,0 +1,33 @@ +======================= + dGPU firmware flashing +======================= + +IFWI +---- +Flashing the dGPU integrated firmware image (IFWI) is supported by GPUs that +use the PSP to orchestrate the update (Navi3x or newer GPUs). +For supported GPUs, `amdgpu` will export a series of sysfs files that can be +used for the flash process. + +The IFWI flash process is: + +1. Ensure the IFWI image is intended for the dGPU on the system. +2. "Write" the IFWI image to the sysfs file `psp_vbflash`. This will stage the IFWI in memory. +3. "Read" from the `psp_vbflash` sysfs file to initiate the flash process. +4. Poll the `psp_vbflash_status` sysfs file to determine when the flash process completes. + +USB-C PD F/W +------------ +On GPUs that support flashing an updated USB-C PD firmware image, the process +is done using the `usbc_pd_fw` sysfs file. + +* Reading the file will provide the current firmware version. +* Writing the name of a firmware payload stored in `/lib/firmware/amdgpu` to the sysfs file will initiate the flash process. + +The firmware payload stored in `/lib/firmware/amdgpu` can be named any name +as long as it doesn't conflict with other existing binaries that are used by +`amdgpu`. + +sysfs files +----------- +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c diff --git a/Documentation/gpu/amdgpu/index.rst b/Documentation/gpu/amdgpu/index.rst index 03c2966cae79..912e699fd373 100644 --- a/Documentation/gpu/amdgpu/index.rst +++ b/Documentation/gpu/amdgpu/index.rst @@ -10,6 +10,7 @@ Next (GCN), Radeon DNA (RDNA), and Compute DNA (CDNA) architectures. module-parameters driver-core display/index + flashing xgmi ras thermal diff --git a/Documentation/gpu/driver-uapi.rst b/Documentation/gpu/driver-uapi.rst index 4411e6919a3d..c08bcbb95fb3 100644 --- a/Documentation/gpu/driver-uapi.rst +++ b/Documentation/gpu/driver-uapi.rst @@ -6,3 +6,14 @@ drm/i915 uAPI ============= .. kernel-doc:: include/uapi/drm/i915_drm.h + +drm/nouveau uAPI +================ + +VM_BIND / EXEC uAPI +------------------- + +.. kernel-doc:: drivers/gpu/drm/nouveau/nouveau_exec.c + :doc: Overview + +.. kernel-doc:: include/uapi/drm/nouveau_drm.h diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index a79fd3549ff8..c19b34b1c0ed 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -466,6 +466,42 @@ DRM MM Range Allocator Function References .. kernel-doc:: drivers/gpu/drm/drm_mm.c :export: +DRM GPU VA Manager +================== + +Overview +-------- + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :doc: Overview + +Split and Merge +--------------- + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :doc: Split and Merge + +Locking +------- + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :doc: Locking + +Examples +-------- + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :doc: Examples + +DRM GPU VA Manager Function References +-------------------------------------- + +.. kernel-doc:: include/drm/drm_gpuva_mgr.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :export: + DRM Buddy Allocator =================== @@ -481,8 +517,10 @@ DRM Cache Handling and Fast WC memcpy() .. kernel-doc:: drivers/gpu/drm/drm_cache.c :export: +.. _drm_sync_objects: + DRM Sync Objects -=========================== +================ .. kernel-doc:: drivers/gpu/drm/drm_syncobj.c :doc: Overview @@ -493,6 +531,18 @@ DRM Sync Objects .. kernel-doc:: drivers/gpu/drm/drm_syncobj.c :export: +DRM Execution context +===================== + +.. kernel-doc:: drivers/gpu/drm/drm_exec.c + :doc: Overview + +.. kernel-doc:: include/drm/drm_exec.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_exec.c + :export: + GPU Scheduler ============= diff --git a/Documentation/gpu/rfc/i915_scheduler.rst b/Documentation/gpu/rfc/i915_scheduler.rst index 23ba7006929b..c237ebc024cd 100644 --- a/Documentation/gpu/rfc/i915_scheduler.rst +++ b/Documentation/gpu/rfc/i915_scheduler.rst @@ -135,9 +135,13 @@ Add I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT and drm_i915_context_engines_parallel_submit to the uAPI to implement this extension. +.. c:namespace-push:: rfc + .. kernel-doc:: include/uapi/drm/i915_drm.h :functions: i915_context_engines_parallel_submit +.. c:namespace-pop:: + Extend execbuf2 IOCTL to support submitting N BBs in a single IOCTL ------------------------------------------------------------------- Contexts that have been configured with the 'set_parallel' extension can only diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 993948eee1a7..03fe5d1247be 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -49,14 +49,18 @@ converted over. Modern compositors like Wayland or Surfaceflinger on Android really want an atomic modeset interface, so this is all about the bright future. -There is a conversion guide for atomic and all you need is a GPU for a -non-converted driver (again virtual HW drivers for KVM are still all -suitable). +There is a conversion guide for atomic [1]_ and all you need is a GPU for a +non-converted driver. The "Atomic mode setting design overview" series [2]_ +[3]_ at LWN.net can also be helpful. As part of this drivers also need to convert to universal plane (which means exposing primary & cursor as proper plane objects). But that's much easier to do by directly using the new atomic helper driver callbacks. + .. [1] https://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html + .. [2] https://lwn.net/Articles/653071/ + .. [3] https://lwn.net/Articles/653466/ + Contact: Daniel Vetter, respective driver maintainers Level: Advanced @@ -319,15 +323,6 @@ Contact: Daniel Vetter, Noralf Tronnes Level: Advanced -struct drm_gem_object_funcs ---------------------------- - -GEM objects can now have a function table instead of having the callbacks on the -DRM driver struct. This is now the preferred way. Callbacks in drivers have been -converted, except for struct drm_driver.gem_prime_mmap. - -Level: Intermediate - connector register/unregister fixes ----------------------------------- @@ -452,6 +447,44 @@ Contact: Thomas Zimmermann <tzimmermann@suse.de> Level: Starter +Remove driver dependencies on FB_DEVICE +--------------------------------------- + +A number of fbdev drivers provide attributes via sysfs and therefore depend +on CONFIG_FB_DEVICE to be selected. Review each driver and attempt to make +any dependencies on CONFIG_FB_DEVICE optional. At the minimum, the respective +code in the driver could be conditionalized via ifdef CONFIG_FB_DEVICE. Not +all drivers might be able to drop CONFIG_FB_DEVICE. + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Starter + +Clean up checks for already prepared/enabled in panels +------------------------------------------------------ + +In a whole pile of panel drivers, we have code to make the +prepare/unprepare/enable/disable callbacks behave as no-ops if they've already +been called. To get some idea of the duplicated code, try:: + + git grep 'if.*>prepared' -- drivers/gpu/drm/panel + git grep 'if.*>enabled' -- drivers/gpu/drm/panel + +In the patch ("drm/panel: Check for already prepared/enabled in drm_panel") +we've moved this check to the core. Now we can most definitely remove the +check from the individual panels and save a pile of code. + +In adition to removing the check from the individual panels, it is believed +that even the core shouldn't need this check and that should be considered +an error if other code ever relies on this check. The check in the core +currently prints a warning whenever something is relying on this check with +dev_warn(). After a little while, we likely want to promote this to a +WARN(1) to help encourage folks not to rely on this behavior. + +Contact: Douglas Anderson <dianders@chromium.org> + +Level: Starter/Intermediate + Core refactorings ================= @@ -749,16 +782,16 @@ existing hardware. The new driver's call-back functions are filled from existing fbdev code. More complex fbdev drivers can be refactored step-by-step into a DRM -driver with the help of the DRM fbconv helpers. [1] These helpers provide +driver with the help of the DRM fbconv helpers [4]_. These helpers provide the transition layer between the DRM core infrastructure and the fbdev driver interface. Create a new DRM driver on top of the fbconv helpers, copy over the fbdev driver, and hook it up to the DRM code. Examples for -several fbdev drivers are available at [1] and a tutorial of this process -available at [2]. The result is a primitive DRM driver that can run X11 -and Weston. +several fbdev drivers are available in Thomas Zimmermann's fbconv tree +[4]_, as well as a tutorial of this process [5]_. The result is a primitive +DRM driver that can run X11 and Weston. - - [1] https://gitlab.freedesktop.org/tzimmermann/linux/tree/fbconv - - [2] https://gitlab.freedesktop.org/tzimmermann/linux/blob/fbconv/drivers/gpu/drm/drm_fbconv_helper.c + .. [4] https://gitlab.freedesktop.org/tzimmermann/linux/tree/fbconv + .. [5] https://gitlab.freedesktop.org/tzimmermann/linux/blob/fbconv/drivers/gpu/drm/drm_fbconv_helper.c Contact: Thomas Zimmermann <tzimmermann@suse.de> diff --git a/Documentation/hwmon/hs3001.rst b/Documentation/hwmon/hs3001.rst new file mode 100644 index 000000000000..9f59dfc212d9 --- /dev/null +++ b/Documentation/hwmon/hs3001.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver HS3001 +==================== + +Supported chips: + + * Renesas HS3001, HS3002, HS3003, HS3004 + + Prefix: 'hs3001' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/hs300x-datasheet?r=417401 + +Author: + + - Andre Werner <andre.werner@systec-electronic.com> + +Description +----------- + +This driver implements support for the Renesas HS3001 chips, a humidity +and temperature family. Temperature is measured in degrees celsius, relative +humidity is expressed as a percentage. In the sysfs interface, all values are +scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. + +The device communicates with the I2C protocol. Sensors have the I2C +address 0x44 by default. + +sysfs-Interface +--------------- + +=================== ================= +temp1_input: temperature input +humidity1_input: humidity input +=================== ================= diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 042e1cf9501b..88dadea85cfc 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -78,6 +78,7 @@ Hardware Monitoring Kernel Drivers gxp-fan-ctrl hih6130 hp-wmi-sensors + hs3001 ibmaem ibm-cffps ibmpowernv @@ -195,7 +196,6 @@ Hardware Monitoring Kernel Drivers shtc1 sis5595 sl28cpld - smm665 smpro-hwmon smsc47b397 smsc47m192 diff --git a/Documentation/hwmon/nct6775.rst b/Documentation/hwmon/nct6775.rst index 5ba8276aad4b..9d7a10de61a7 100644 --- a/Documentation/hwmon/nct6775.rst +++ b/Documentation/hwmon/nct6775.rst @@ -80,7 +80,13 @@ Supported chips: Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6796D-S/NCT6799D-R + Prefix: 'nct6799' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request Authors: @@ -277,4 +283,7 @@ will not reflect a usable value. It often reports unreasonably high temperatures, and in some cases the reported temperature declines if the actual temperature increases (similar to the raw PECI temperature value - see PECI specification for details). CPUTIN should therefore be ignored on ASUS -boards. The CPU temperature on ASUS boards is reported from PECI 0. +boards. The CPU temperature on ASUS boards is reported from PECI 0 or TSI 0. + +NCT6796D-S and NCT6799D-R chips are very similar and their chip_id indicates +they are different versions. This driver treats them the same way. diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst index 7ecfec6ca2db..eb1569bfa676 100644 --- a/Documentation/hwmon/pmbus.rst +++ b/Documentation/hwmon/pmbus.rst @@ -163,7 +163,7 @@ Emerson DS1200 power modules might look as follows:: .driver = { .name = "ds1200", }, - .probe_new = ds1200_probe, + .probe = ds1200_probe, .id_table = ds1200_id, }; diff --git a/Documentation/hwmon/smm665.rst b/Documentation/hwmon/smm665.rst deleted file mode 100644 index 481e69d8bf39..000000000000 --- a/Documentation/hwmon/smm665.rst +++ /dev/null @@ -1,187 +0,0 @@ -Kernel driver smm665 -==================== - -Supported chips: - - * Summit Microelectronics SMM465 - - Prefix: 'smm465' - - Addresses scanned: - - - Datasheet: - - http://www.summitmicro.com/prod_select/summary/SMM465/SMM465DS.pdf - - * Summit Microelectronics SMM665, SMM665B - - Prefix: 'smm665' - - Addresses scanned: - - - Datasheet: - - http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf - - * Summit Microelectronics SMM665C - - Prefix: 'smm665c' - - Addresses scanned: - - - Datasheet: - - http://www.summitmicro.com/prod_select/summary/SMM665C/SMM665C_2125.pdf - - * Summit Microelectronics SMM764 - - Prefix: 'smm764' - - Addresses scanned: - - - Datasheet: - - http://www.summitmicro.com/prod_select/summary/SMM764/SMM764_2098.pdf - - * Summit Microelectronics SMM766, SMM766B - - Prefix: 'smm766' - - Addresses scanned: - - - Datasheets: - - http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf - - http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf - -Author: Guenter Roeck <linux@roeck-us.net> - - -Module Parameters ------------------ - -* vref: int - Default: 1250 (mV) - - Reference voltage on VREF_ADC pin in mV. It should not be necessary to set - this parameter unless a non-default reference voltage is used. - - -Description ------------ - -[From datasheet] The SMM665 is an Active DC Output power supply Controller -that monitors, margins and cascade sequences power. The part monitors six -power supply channels as well as VDD, 12V input, two general-purpose analog -inputs and an internal temperature sensor using a 10-bit ADC. - -Each monitored channel has its own high and low limits, plus a critical -limit. - -Support for SMM465, SMM764, and SMM766 has been implemented but is untested. - - -Usage Notes ------------ - -This driver does not probe for devices, since there is no register which -can be safely used to identify the chip. You will have to instantiate -the devices explicitly. When instantiating the device, you have to specify -its configuration register address. - -Example: the following will load the driver for an SMM665 at address 0x57 -on I2C bus #1:: - - $ modprobe smm665 - $ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device - - -Sysfs entries -------------- - -This driver uses the values in the datasheet to convert ADC register values -into the values specified in the sysfs-interface document. All attributes are -read only. - -Min, max, lcrit, and crit values are used by the chip to trigger external signals -and/or other activity. Triggered signals can include HEALTHY, RST, Power Off, -or Fault depending on the chip configuration. The driver reports values as lcrit -or crit if exceeding the limits triggers RST, Power Off, or Fault, and as min or -max otherwise. For details please see the SMM665 datasheet. - -For SMM465 and SMM764, values for Channel E and F are reported but undefined. - -======================= ======================================================= -in1_input 12V input voltage (mV) -in2_input 3.3V (VDD) input voltage (mV) -in3_input Channel A voltage (mV) -in4_input Channel B voltage (mV) -in5_input Channel C voltage (mV) -in6_input Channel D voltage (mV) -in7_input Channel E voltage (mV) -in8_input Channel F voltage (mV) -in9_input AIN1 voltage (mV) -in10_input AIN2 voltage (mV) - -in1_min 12v input minimum voltage (mV) -in2_min 3.3V (VDD) input minimum voltage (mV) -in3_min Channel A minimum voltage (mV) -in4_min Channel B minimum voltage (mV) -in5_min Channel C minimum voltage (mV) -in6_min Channel D minimum voltage (mV) -in7_min Channel E minimum voltage (mV) -in8_min Channel F minimum voltage (mV) -in9_min AIN1 minimum voltage (mV) -in10_min AIN2 minimum voltage (mV) - -in1_max 12v input maximum voltage (mV) -in2_max 3.3V (VDD) input maximum voltage (mV) -in3_max Channel A maximum voltage (mV) -in4_max Channel B maximum voltage (mV) -in5_max Channel C maximum voltage (mV) -in6_max Channel D maximum voltage (mV) -in7_max Channel E maximum voltage (mV) -in8_max Channel F maximum voltage (mV) -in9_max AIN1 maximum voltage (mV) -in10_max AIN2 maximum voltage (mV) - -in1_lcrit 12v input critical minimum voltage (mV) -in2_lcrit 3.3V (VDD) input critical minimum voltage (mV) -in3_lcrit Channel A critical minimum voltage (mV) -in4_lcrit Channel B critical minimum voltage (mV) -in5_lcrit Channel C critical minimum voltage (mV) -in6_lcrit Channel D critical minimum voltage (mV) -in7_lcrit Channel E critical minimum voltage (mV) -in8_lcrit Channel F critical minimum voltage (mV) -in9_lcrit AIN1 critical minimum voltage (mV) -in10_lcrit AIN2 critical minimum voltage (mV) - -in1_crit 12v input critical maximum voltage (mV) -in2_crit 3.3V (VDD) input critical maximum voltage (mV) -in3_crit Channel A critical maximum voltage (mV) -in4_crit Channel B critical maximum voltage (mV) -in5_crit Channel C critical maximum voltage (mV) -in6_crit Channel D critical maximum voltage (mV) -in7_crit Channel E critical maximum voltage (mV) -in8_crit Channel F critical maximum voltage (mV) -in9_crit AIN1 critical maximum voltage (mV) -in10_crit AIN2 critical maximum voltage (mV) - -in1_crit_alarm 12v input critical alarm -in2_crit_alarm 3.3V (VDD) input critical alarm -in3_crit_alarm Channel A critical alarm -in4_crit_alarm Channel B critical alarm -in5_crit_alarm Channel C critical alarm -in6_crit_alarm Channel D critical alarm -in7_crit_alarm Channel E critical alarm -in8_crit_alarm Channel F critical alarm -in9_crit_alarm AIN1 critical alarm -in10_crit_alarm AIN2 critical alarm - -temp1_input Chip temperature -temp1_min Minimum chip temperature -temp1_max Maximum chip temperature -temp1_crit Critical chip temperature -temp1_crit_alarm Temperature critical alarm -======================= ======================================================= diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst index b7d3ae7458f8..41ddc10f1ac7 100644 --- a/Documentation/i2c/writing-clients.rst +++ b/Documentation/i2c/writing-clients.rst @@ -46,7 +46,7 @@ driver model device node, and its I2C address. }, .id_table = foo_idtable, - .probe_new = foo_probe, + .probe = foo_probe, .remove = foo_remove, /* if device autodetection is needed: */ .class = I2C_CLASS_SOMETHING, diff --git a/Documentation/maintainer/maintainer-entry-profile.rst b/Documentation/maintainer/maintainer-entry-profile.rst index cfd37f31077f..6b64072d4bf2 100644 --- a/Documentation/maintainer/maintainer-entry-profile.rst +++ b/Documentation/maintainer/maintainer-entry-profile.rst @@ -105,3 +105,4 @@ to do something different in the near future. ../driver-api/media/maintainer-entry-profile ../driver-api/vfio-pci-device-specific-driver-acceptance ../nvme/feature-and-quirk-policy + ../filesystems/xfs-maintainer-entry-profile diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst index 4bfdf1d30c4a..a20383d01a95 100644 --- a/Documentation/mm/damon/design.rst +++ b/Documentation/mm/damon/design.rst @@ -380,12 +380,24 @@ number of filters for each scheme. Each filter specifies the type of target memory, and whether it should exclude the memory of the type (filter-out), or all except the memory of the type (filter-in). -As of this writing, anonymous page type and memory cgroup type are supported by -the feature. Some filter target types can require additional arguments. For -example, the memory cgroup filter type asks users to specify the file path of -the memory cgroup for the filter. Hence, users can apply specific schemes to -only anonymous pages, non-anonymous pages, pages of specific cgroups, all pages -excluding those of specific cgroups, and any combination of those. +Currently, anonymous page, memory cgroup, address range, and DAMON monitoring +target type filters are supported by the feature. Some filter target types +require additional arguments. The memory cgroup filter type asks users to +specify the file path of the memory cgroup for the filter. The address range +type asks the start and end addresses of the range. The DAMON monitoring +target type asks the index of the target from the context's monitoring targets +list. Hence, users can apply specific schemes to only anonymous pages, +non-anonymous pages, pages of specific cgroups, all pages excluding those of +specific cgroups, pages in specific address range, pages in specific DAMON +monitoring targets, and any combination of those. + +To handle filters efficiently, the address range and DAMON monitoring target +type filters are handled by the core layer, while others are handled by +operations set. If a memory region is filtered by a core layer-handled filter, +it is not counted as the scheme has tried to the region. In contrast, if a +memory regions is filtered by an operations set layer-handled filter, it is +counted as the scheme has tried. The difference in accounting leads to changes +in the statistics. Application Programming Interface diff --git a/Documentation/mm/frontswap.rst b/Documentation/mm/frontswap.rst deleted file mode 100644 index c892412988af..000000000000 --- a/Documentation/mm/frontswap.rst +++ /dev/null @@ -1,264 +0,0 @@ -========= -Frontswap -========= - -Frontswap provides a "transcendent memory" interface for swap pages. -In some environments, dramatic performance savings may be obtained because -swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk. - -.. _Transcendent memory in a nutshell: https://lwn.net/Articles/454795/ - -Frontswap is so named because it can be thought of as the opposite of -a "backing" store for a swap device. The storage is assumed to be -a synchronous concurrency-safe page-oriented "pseudo-RAM device" conforming -to the requirements of transcendent memory (such as Xen's "tmem", or -in-kernel compressed memory, aka "zcache", or future RAM-like devices); -this pseudo-RAM device is not directly accessible or addressable by the -kernel and is of unknown and possibly time-varying size. The driver -links itself to frontswap by calling frontswap_register_ops to set the -frontswap_ops funcs appropriately and the functions it provides must -conform to certain policies as follows: - -An "init" prepares the device to receive frontswap pages associated -with the specified swap device number (aka "type"). A "store" will -copy the page to transcendent memory and associate it with the type and -offset associated with the page. A "load" will copy the page, if found, -from transcendent memory into kernel memory, but will NOT remove the page -from transcendent memory. An "invalidate_page" will remove the page -from transcendent memory and an "invalidate_area" will remove ALL pages -associated with the swap type (e.g., like swapoff) and notify the "device" -to refuse further stores with that swap type. - -Once a page is successfully stored, a matching load on the page will normally -succeed. So when the kernel finds itself in a situation where it needs -to swap out a page, it first attempts to use frontswap. If the store returns -success, the data has been successfully saved to transcendent memory and -a disk write and, if the data is later read back, a disk read are avoided. -If a store returns failure, transcendent memory has rejected the data, and the -page can be written to swap as usual. - -Note that if a page is stored and the page already exists in transcendent memory -(a "duplicate" store), either the store succeeds and the data is overwritten, -or the store fails AND the page is invalidated. This ensures stale data may -never be obtained from frontswap. - -If properly configured, monitoring of frontswap is done via debugfs in -the `/sys/kernel/debug/frontswap` directory. The effectiveness of -frontswap can be measured (across all swap devices) with: - -``failed_stores`` - how many store attempts have failed - -``loads`` - how many loads were attempted (all should succeed) - -``succ_stores`` - how many store attempts have succeeded - -``invalidates`` - how many invalidates were attempted - -A backend implementation may provide additional metrics. - -FAQ -=== - -* Where's the value? - -When a workload starts swapping, performance falls through the floor. -Frontswap significantly increases performance in many such workloads by -providing a clean, dynamic interface to read and write swap pages to -"transcendent memory" that is otherwise not directly addressable to the kernel. -This interface is ideal when data is transformed to a different form -and size (such as with compression) or secretly moved (as might be -useful for write-balancing for some RAM-like devices). Swap pages (and -evicted page-cache pages) are a great use for this kind of slower-than-RAM- -but-much-faster-than-disk "pseudo-RAM device". - -Frontswap with a fairly small impact on the kernel, -provides a huge amount of flexibility for more dynamic, flexible RAM -utilization in various system configurations: - -In the single kernel case, aka "zcache", pages are compressed and -stored in local memory, thus increasing the total anonymous pages -that can be safely kept in RAM. Zcache essentially trades off CPU -cycles used in compression/decompression for better memory utilization. -Benchmarks have shown little or no impact when memory pressure is -low while providing a significant performance improvement (25%+) -on some workloads under high memory pressure. - -"RAMster" builds on zcache by adding "peer-to-peer" transcendent memory -support for clustered systems. Frontswap pages are locally compressed -as in zcache, but then "remotified" to another system's RAM. This -allows RAM to be dynamically load-balanced back-and-forth as needed, -i.e. when system A is overcommitted, it can swap to system B, and -vice versa. RAMster can also be configured as a memory server so -many servers in a cluster can swap, dynamically as needed, to a single -server configured with a large amount of RAM... without pre-configuring -how much of the RAM is available for each of the clients! - -In the virtual case, the whole point of virtualization is to statistically -multiplex physical resources across the varying demands of multiple -virtual machines. This is really hard to do with RAM and efforts to do -it well with no kernel changes have essentially failed (except in some -well-publicized special-case workloads). -Specifically, the Xen Transcendent Memory backend allows otherwise -"fallow" hypervisor-owned RAM to not only be "time-shared" between multiple -virtual machines, but the pages can be compressed and deduplicated to -optimize RAM utilization. And when guest OS's are induced to surrender -underutilized RAM (e.g. with "selfballooning"), sudden unexpected -memory pressure may result in swapping; frontswap allows those pages -to be swapped to and from hypervisor RAM (if overall host system memory -conditions allow), thus mitigating the potentially awful performance impact -of unplanned swapping. - -A KVM implementation is underway and has been RFC'ed to lkml. And, -using frontswap, investigation is also underway on the use of NVM as -a memory extension technology. - -* Sure there may be performance advantages in some situations, but - what's the space/time overhead of frontswap? - -If CONFIG_FRONTSWAP is disabled, every frontswap hook compiles into -nothingness and the only overhead is a few extra bytes per swapon'ed -swap device. If CONFIG_FRONTSWAP is enabled but no frontswap "backend" -registers, there is one extra global variable compared to zero for -every swap page read or written. If CONFIG_FRONTSWAP is enabled -AND a frontswap backend registers AND the backend fails every "store" -request (i.e. provides no memory despite claiming it might), -CPU overhead is still negligible -- and since every frontswap fail -precedes a swap page write-to-disk, the system is highly likely -to be I/O bound and using a small fraction of a percent of a CPU -will be irrelevant anyway. - -As for space, if CONFIG_FRONTSWAP is enabled AND a frontswap backend -registers, one bit is allocated for every swap page for every swap -device that is swapon'd. This is added to the EIGHT bits (which -was sixteen until about 2.6.34) that the kernel already allocates -for every swap page for every swap device that is swapon'd. (Hugh -Dickins has observed that frontswap could probably steal one of -the existing eight bits, but let's worry about that minor optimization -later.) For very large swap disks (which are rare) on a standard -4K pagesize, this is 1MB per 32GB swap. - -When swap pages are stored in transcendent memory instead of written -out to disk, there is a side effect that this may create more memory -pressure that can potentially outweigh the other advantages. A -backend, such as zcache, must implement policies to carefully (but -dynamically) manage memory limits to ensure this doesn't happen. - -* OK, how about a quick overview of what this frontswap patch does - in terms that a kernel hacker can grok? - -Let's assume that a frontswap "backend" has registered during -kernel initialization; this registration indicates that this -frontswap backend has access to some "memory" that is not directly -accessible by the kernel. Exactly how much memory it provides is -entirely dynamic and random. - -Whenever a swap-device is swapon'd frontswap_init() is called, -passing the swap device number (aka "type") as a parameter. -This notifies frontswap to expect attempts to "store" swap pages -associated with that number. - -Whenever the swap subsystem is readying a page to write to a swap -device (c.f swap_writepage()), frontswap_store is called. Frontswap -consults with the frontswap backend and if the backend says it does NOT -have room, frontswap_store returns -1 and the kernel swaps the page -to the swap device as normal. Note that the response from the frontswap -backend is unpredictable to the kernel; it may choose to never accept a -page, it could accept every ninth page, or it might accept every -page. But if the backend does accept a page, the data from the page -has already been copied and associated with the type and offset, -and the backend guarantees the persistence of the data. In this case, -frontswap sets a bit in the "frontswap_map" for the swap device -corresponding to the page offset on the swap device to which it would -otherwise have written the data. - -When the swap subsystem needs to swap-in a page (swap_readpage()), -it first calls frontswap_load() which checks the frontswap_map to -see if the page was earlier accepted by the frontswap backend. If -it was, the page of data is filled from the frontswap backend and -the swap-in is complete. If not, the normal swap-in code is -executed to obtain the page of data from the real swap device. - -So every time the frontswap backend accepts a page, a swap device read -and (potentially) a swap device write are replaced by a "frontswap backend -store" and (possibly) a "frontswap backend loads", which are presumably much -faster. - -* Can't frontswap be configured as a "special" swap device that is - just higher priority than any real swap device (e.g. like zswap, - or maybe swap-over-nbd/NFS)? - -No. First, the existing swap subsystem doesn't allow for any kind of -swap hierarchy. Perhaps it could be rewritten to accommodate a hierarchy, -but this would require fairly drastic changes. Even if it were -rewritten, the existing swap subsystem uses the block I/O layer which -assumes a swap device is fixed size and any page in it is linearly -addressable. Frontswap barely touches the existing swap subsystem, -and works around the constraints of the block I/O subsystem to provide -a great deal of flexibility and dynamicity. - -For example, the acceptance of any swap page by the frontswap backend is -entirely unpredictable. This is critical to the definition of frontswap -backends because it grants completely dynamic discretion to the -backend. In zcache, one cannot know a priori how compressible a page is. -"Poorly" compressible pages can be rejected, and "poorly" can itself be -defined dynamically depending on current memory constraints. - -Further, frontswap is entirely synchronous whereas a real swap -device is, by definition, asynchronous and uses block I/O. The -block I/O layer is not only unnecessary, but may perform "optimizations" -that are inappropriate for a RAM-oriented device including delaying -the write of some pages for a significant amount of time. Synchrony is -required to ensure the dynamicity of the backend and to avoid thorny race -conditions that would unnecessarily and greatly complicate frontswap -and/or the block I/O subsystem. That said, only the initial "store" -and "load" operations need be synchronous. A separate asynchronous thread -is free to manipulate the pages stored by frontswap. For example, -the "remotification" thread in RAMster uses standard asynchronous -kernel sockets to move compressed frontswap pages to a remote machine. -Similarly, a KVM guest-side implementation could do in-guest compression -and use "batched" hypercalls. - -In a virtualized environment, the dynamicity allows the hypervisor -(or host OS) to do "intelligent overcommit". For example, it can -choose to accept pages only until host-swapping might be imminent, -then force guests to do their own swapping. - -There is a downside to the transcendent memory specifications for -frontswap: Since any "store" might fail, there must always be a real -slot on a real swap device to swap the page. Thus frontswap must be -implemented as a "shadow" to every swapon'd device with the potential -capability of holding every page that the swap device might have held -and the possibility that it might hold no pages at all. This means -that frontswap cannot contain more pages than the total of swapon'd -swap devices. For example, if NO swap device is configured on some -installation, frontswap is useless. Swapless portable devices -can still use frontswap but a backend for such devices must configure -some kind of "ghost" swap device and ensure that it is never used. - -* Why this weird definition about "duplicate stores"? If a page - has been previously successfully stored, can't it always be - successfully overwritten? - -Nearly always it can, but no, sometimes it cannot. Consider an example -where data is compressed and the original 4K page has been compressed -to 1K. Now an attempt is made to overwrite the page with data that -is non-compressible and so would take the entire 4K. But the backend -has no more space. In this case, the store must be rejected. Whenever -frontswap rejects a store that would overwrite, it also must invalidate -the old data and ensure that it is no longer accessible. Since the -swap subsystem then writes the new data to the read swap device, -this is the correct course of action to ensure coherency. - -* Why does the frontswap patch create the new include file swapfile.h? - -The frontswap code depends on some swap-subsystem-internal data -structures that have, over the years, moved back and forth between -static and global. This seemed a reasonable compromise: Define -them as global but declare them in a new include file that isn't -included by the large number of source files that include swap.h. - -Dan Magenheimer, last updated April 9, 2012 diff --git a/Documentation/mm/highmem.rst b/Documentation/mm/highmem.rst index fe68e02fc8ff..9d92e3f2b3d6 100644 --- a/Documentation/mm/highmem.rst +++ b/Documentation/mm/highmem.rst @@ -209,4 +209,5 @@ Functions ========= .. kernel-doc:: include/linux/highmem.h +.. kernel-doc:: mm/highmem.c .. kernel-doc:: include/linux/highmem-internal.h diff --git a/Documentation/mm/hugetlbfs_reserv.rst b/Documentation/mm/hugetlbfs_reserv.rst index d9c2b0f01dcd..4914fbf07966 100644 --- a/Documentation/mm/hugetlbfs_reserv.rst +++ b/Documentation/mm/hugetlbfs_reserv.rst @@ -271,12 +271,12 @@ to the global reservation count (resv_huge_pages). Freeing Huge Pages ================== -Huge page freeing is performed by the routine free_huge_page(). This routine -is the destructor for hugetlbfs compound pages. As a result, it is only -passed a pointer to the page struct. When a huge page is freed, reservation -accounting may need to be performed. This would be the case if the page was -associated with a subpool that contained reserves, or the page is being freed -on an error path where a global reserve count must be restored. +Huge pages are freed by free_huge_folio(). It is only passed a pointer +to the folio as it is called from the generic MM code. When a huge page +is freed, reservation accounting may need to be performed. This would +be the case if the page was associated with a subpool that contained +reserves, or the page is being freed on an error path where a global +reserve count must be restored. The page->private field points to any subpool associated with the page. If the PagePrivate flag is set, it indicates the global reserve count should @@ -525,7 +525,7 @@ However, there are several instances where errors are encountered after a huge page is allocated but before it is instantiated. In this case, the page allocation has consumed the reservation and made the appropriate subpool, reservation map and global count adjustments. If the page is freed at this -time (before instantiation and clearing of PagePrivate), then free_huge_page +time (before instantiation and clearing of PagePrivate), then free_huge_folio will increment the global reservation count. However, the reservation map indicates the reservation was consumed. This resulting inconsistent state will cause the 'leak' of a reserved huge page. The global reserve count will diff --git a/Documentation/mm/index.rst b/Documentation/mm/index.rst index 5a94a921ea40..31d2ac306438 100644 --- a/Documentation/mm/index.rst +++ b/Documentation/mm/index.rst @@ -44,7 +44,6 @@ above structured documentation, or deleted if it has served its purpose. balance damon/index free_page_reporting - frontswap hmm hwpoison hugetlbfs_reserv diff --git a/Documentation/mm/split_page_table_lock.rst b/Documentation/mm/split_page_table_lock.rst index a834fad9de12..e4f6972eb6c0 100644 --- a/Documentation/mm/split_page_table_lock.rst +++ b/Documentation/mm/split_page_table_lock.rst @@ -58,7 +58,7 @@ Support of split page table lock by an architecture =================================================== There's no need in special enabling of PTE split page table lock: everything -required is done by pgtable_pte_page_ctor() and pgtable_pte_page_dtor(), which +required is done by pagetable_pte_ctor() and pagetable_pte_dtor(), which must be called on PTE table allocation / freeing. Make sure the architecture doesn't use slab allocator for page table @@ -68,8 +68,8 @@ This field shares storage with page->ptl. PMD split lock only makes sense if you have more than two page table levels. -PMD split lock enabling requires pgtable_pmd_page_ctor() call on PMD table -allocation and pgtable_pmd_page_dtor() on freeing. +PMD split lock enabling requires pagetable_pmd_ctor() call on PMD table +allocation and pagetable_pmd_dtor() on freeing. Allocation usually happens in pmd_alloc_one(), freeing in pmd_free() and pmd_free_tlb(), but make sure you cover all PMD table allocation / freeing @@ -77,7 +77,7 @@ paths: i.e X86_PAE preallocate few PMDs on pgd_alloc(). With everything in place you can set CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK. -NOTE: pgtable_pte_page_ctor() and pgtable_pmd_page_ctor() can fail -- it must +NOTE: pagetable_pte_ctor() and pagetable_pmd_ctor() can fail -- it must be handled properly. page->ptl @@ -97,7 +97,7 @@ trick: split lock with enabled DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC, but costs one more cache line for indirect access; -The spinlock_t allocated in pgtable_pte_page_ctor() for PTE table and in -pgtable_pmd_page_ctor() for PMD table. +The spinlock_t allocated in pagetable_pte_ctor() for PTE table and in +pagetable_pmd_ctor() for PMD table. Please, never access page->ptl directly -- use appropriate helper. diff --git a/Documentation/mm/vmemmap_dedup.rst b/Documentation/mm/vmemmap_dedup.rst index 21f159b8afbe..59891f72420e 100644 --- a/Documentation/mm/vmemmap_dedup.rst +++ b/Documentation/mm/vmemmap_dedup.rst @@ -211,6 +211,7 @@ the device (altmap). The following page sizes are supported in DAX: PAGE_SIZE (4K on x86_64), PMD_SIZE (2M on x86_64) and PUD_SIZE (1G on x86_64). +For powerpc equivalent details see Documentation/powerpc/vmemmap_dedup.rst The differences with HugeTLB are relatively minor. diff --git a/Documentation/mm/zsmalloc.rst b/Documentation/mm/zsmalloc.rst index a3c26d587752..76902835e68e 100644 --- a/Documentation/mm/zsmalloc.rst +++ b/Documentation/mm/zsmalloc.rst @@ -263,3 +263,8 @@ is heavy internal fragmentation and zspool compaction is unable to relocate objects and release zspages. In these cases, it is recommended to decrease the limit on the size of the zspage chains (as specified by the CONFIG_ZSMALLOC_CHAIN_SIZE option). + +Functions +========= + +.. kernel-doc:: mm/zsmalloc.c diff --git a/Documentation/netlink/genetlink-c.yaml b/Documentation/netlink/genetlink-c.yaml index 2627a384ae01..9806c44f604c 100644 --- a/Documentation/netlink/genetlink-c.yaml +++ b/Documentation/netlink/genetlink-c.yaml @@ -274,7 +274,7 @@ properties: description: Kernel attribute validation flags. type: array items: - enum: [ strict, dump ] + enum: [ strict, dump, dump-strict ] do: &subop-type description: Main command handler. type: object diff --git a/Documentation/netlink/genetlink-legacy.yaml b/Documentation/netlink/genetlink-legacy.yaml index 30803dc21123..12a0a045605d 100644 --- a/Documentation/netlink/genetlink-legacy.yaml +++ b/Documentation/netlink/genetlink-legacy.yaml @@ -321,7 +321,7 @@ properties: description: Kernel attribute validation flags. type: array items: - enum: [ strict, dump ] + enum: [ strict, dump, dump-strict ] # Start genetlink-legacy fixed-header: *fixed-header # End genetlink-legacy diff --git a/Documentation/netlink/genetlink.yaml b/Documentation/netlink/genetlink.yaml index 1cbb448d2f1c..3d338c48bf21 100644 --- a/Documentation/netlink/genetlink.yaml +++ b/Documentation/netlink/genetlink.yaml @@ -243,7 +243,7 @@ properties: description: Kernel attribute validation flags. type: array items: - enum: [ strict, dump ] + enum: [ strict, dump, dump-strict ] do: &subop-type description: Main command handler. type: object diff --git a/Documentation/netlink/netlink-raw.yaml b/Documentation/netlink/netlink-raw.yaml new file mode 100644 index 000000000000..896797876414 --- /dev/null +++ b/Documentation/netlink/netlink-raw.yaml @@ -0,0 +1,410 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) +%YAML 1.2 +--- +$id: http://kernel.org/schemas/netlink/netlink-raw.yaml# +$schema: https://json-schema.org/draft-07/schema + +# Common defines +$defs: + uint: + type: integer + minimum: 0 + len-or-define: + type: [ string, integer ] + pattern: ^[0-9A-Za-z_]+( - 1)?$ + minimum: 0 + +# Schema for specs +title: Protocol +description: Specification of a raw netlink protocol +type: object +required: [ name, doc, attribute-sets, operations ] +additionalProperties: False +properties: + name: + description: Name of the netlink family. + type: string + doc: + type: string + protocol: + description: Schema compatibility level. + enum: [ netlink-raw ] # Trim + # Start netlink-raw + protonum: + description: Protocol number to use for netlink-raw + type: integer + # End netlink-raw + uapi-header: + description: Path to the uAPI header, default is linux/${family-name}.h + type: string + # Start genetlink-c + c-family-name: + description: Name of the define for the family name. + type: string + c-version-name: + description: Name of the define for the version of the family. + type: string + max-by-define: + description: Makes the number of attributes and commands be specified by a define, not an enum value. + type: boolean + # End genetlink-c + # Start genetlink-legacy + kernel-policy: + description: | + Defines if the input policy in the kernel is global, per-operation, or split per operation type. + Default is split. + enum: [ split, per-op, global ] + # End genetlink-legacy + + definitions: + description: List of type and constant definitions (enums, flags, defines). + type: array + items: + type: object + required: [ type, name ] + additionalProperties: False + properties: + name: + type: string + header: + description: For C-compatible languages, header which already defines this value. + type: string + type: + enum: [ const, enum, flags, struct ] # Trim + doc: + type: string + # For const + value: + description: For const - the value. + type: [ string, integer ] + # For enum and flags + value-start: + description: For enum or flags the literal initializer for the first value. + type: [ string, integer ] + entries: + description: For enum or flags array of values. + type: array + items: + oneOf: + - type: string + - type: object + required: [ name ] + additionalProperties: False + properties: + name: + type: string + value: + type: integer + doc: + type: string + render-max: + description: Render the max members for this enum. + type: boolean + # Start genetlink-c + enum-name: + description: Name for enum, if empty no name will be used. + type: [ string, "null" ] + name-prefix: + description: For enum the prefix of the values, optional. + type: string + # End genetlink-c + # Start genetlink-legacy + members: + description: List of struct members. Only scalars and strings members allowed. + type: array + items: + type: object + required: [ name, type ] + additionalProperties: False + properties: + name: + type: string + type: + description: The netlink attribute type + enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string, binary ] + len: + $ref: '#/$defs/len-or-define' + byte-order: + enum: [ little-endian, big-endian ] + doc: + description: Documentation for the struct member attribute. + type: string + enum: + description: Name of the enum type used for the attribute. + type: string + enum-as-flags: + description: | + Treat the enum as flags. In most cases enum is either used as flags or as values. + Sometimes, however, both forms are necessary, in which case header contains the enum + form while specific attributes may request to convert the values into a bitfield. + type: boolean + display-hint: &display-hint + description: | + Optional format indicator that is intended only for choosing + the right formatting mechanism when displaying values of this + type. + enum: [ hex, mac, fddi, ipv4, ipv6, uuid ] + # End genetlink-legacy + + attribute-sets: + description: Definition of attribute spaces for this family. + type: array + items: + description: Definition of a single attribute space. + type: object + required: [ name, attributes ] + additionalProperties: False + properties: + name: + description: | + Name used when referring to this space in other definitions, not used outside of the spec. + type: string + name-prefix: + description: | + Prefix for the C enum name of the attributes. Default family[name]-set[name]-a- + type: string + enum-name: + description: Name for the enum type of the attribute. + type: string + doc: + description: Documentation of the space. + type: string + subset-of: + description: | + Name of another space which this is a logical part of. Sub-spaces can be used to define + a limited group of attributes which are used in a nest. + type: string + # Start genetlink-c + attr-cnt-name: + description: The explicit name for constant holding the count of attributes (last attr + 1). + type: string + attr-max-name: + description: The explicit name for last member of attribute enum. + type: string + # End genetlink-c + attributes: + description: List of attributes in the space. + type: array + items: + type: object + required: [ name, type ] + additionalProperties: False + properties: + name: + type: string + type: &attr-type + description: The netlink attribute type + enum: [ unused, pad, flag, binary, u8, u16, u32, u64, s32, s64, + string, nest, array-nest, nest-type-value ] + doc: + description: Documentation of the attribute. + type: string + value: + description: Value for the enum item representing this attribute in the uAPI. + $ref: '#/$defs/uint' + type-value: + description: Name of the value extracted from the type of a nest-type-value attribute. + type: array + items: + type: string + byte-order: + enum: [ little-endian, big-endian ] + multi-attr: + type: boolean + nested-attributes: + description: Name of the space (sub-space) used inside the attribute. + type: string + enum: + description: Name of the enum type used for the attribute. + type: string + enum-as-flags: + description: | + Treat the enum as flags. In most cases enum is either used as flags or as values. + Sometimes, however, both forms are necessary, in which case header contains the enum + form while specific attributes may request to convert the values into a bitfield. + type: boolean + checks: + description: Kernel input validation. + type: object + additionalProperties: False + properties: + flags-mask: + description: Name of the flags constant on which to base mask (unsigned scalar types only). + type: string + min: + description: Min value for an integer attribute. + type: integer + min-len: + description: Min length for a binary attribute. + $ref: '#/$defs/len-or-define' + max-len: + description: Max length for a string or a binary attribute. + $ref: '#/$defs/len-or-define' + sub-type: *attr-type + display-hint: *display-hint + # Start genetlink-c + name-prefix: + type: string + # End genetlink-c + # Start genetlink-legacy + struct: + description: Name of the struct type used for the attribute. + type: string + # End genetlink-legacy + + # Make sure name-prefix does not appear in subsets (subsets inherit naming) + dependencies: + name-prefix: + not: + required: [ subset-of ] + subset-of: + not: + required: [ name-prefix ] + + operations: + description: Operations supported by the protocol. + type: object + required: [ list ] + additionalProperties: False + properties: + enum-model: + description: | + The model of assigning values to the operations. + "unified" is the recommended model where all message types belong + to a single enum. + "directional" has the messages sent to the kernel and from the kernel + enumerated separately. + enum: [ unified, directional ] # Trim + name-prefix: + description: | + Prefix for the C enum name of the command. The name is formed by concatenating + the prefix with the upper case name of the command, with dashes replaced by underscores. + type: string + enum-name: + description: Name for the enum type with commands. + type: string + async-prefix: + description: Same as name-prefix but used to render notifications and events to separate enum. + type: string + async-enum: + description: Name for the enum type with notifications/events. + type: string + # Start genetlink-legacy + fixed-header: &fixed-header + description: | + Name of the structure defining the optional fixed-length protocol + header. This header is placed in a message after the netlink and + genetlink headers and before any attributes. + type: string + # End genetlink-legacy + list: + description: List of commands + type: array + items: + type: object + additionalProperties: False + required: [ name, doc ] + properties: + name: + description: Name of the operation, also defining its C enum value in uAPI. + type: string + doc: + description: Documentation for the command. + type: string + value: + description: Value for the enum in the uAPI. + $ref: '#/$defs/uint' + attribute-set: + description: | + Attribute space from which attributes directly in the requests and replies + to this command are defined. + type: string + flags: &cmd_flags + description: Command flags. + type: array + items: + enum: [ admin-perm ] + dont-validate: + description: Kernel attribute validation flags. + type: array + items: + enum: [ strict, dump ] + # Start genetlink-legacy + fixed-header: *fixed-header + # End genetlink-legacy + do: &subop-type + description: Main command handler. + type: object + additionalProperties: False + properties: + request: &subop-attr-list + description: Definition of the request message for a given command. + type: object + additionalProperties: False + properties: + attributes: + description: | + Names of attributes from the attribute-set (not full attribute + definitions, just names). + type: array + items: + type: string + # Start genetlink-legacy + value: + description: | + ID of this message if value for request and response differ, + i.e. requests and responses have different message enums. + $ref: '#/$defs/uint' + # End genetlink-legacy + reply: *subop-attr-list + pre: + description: Hook for a function to run before the main callback (pre_doit or start). + type: string + post: + description: Hook for a function to run after the main callback (post_doit or done). + type: string + dump: *subop-type + notify: + description: Name of the command sharing the reply type with this notification. + type: string + event: + type: object + additionalProperties: False + properties: + attributes: + description: Explicit list of the attributes for the notification. + type: array + items: + type: string + mcgrp: + description: Name of the multicast group generating given notification. + type: string + mcast-groups: + description: List of multicast groups. + type: object + required: [ list ] + additionalProperties: False + properties: + list: + description: List of groups. + type: array + items: + type: object + required: [ name ] + additionalProperties: False + properties: + name: + description: | + The name for the group, used to form the define and the value of the define. + type: string + # Start genetlink-c + c-define-name: + description: Override for the name of the define in C uAPI. + type: string + # End genetlink-c + flags: *cmd_flags + # Start netlink-raw + value: + description: Value of the netlink multicast group in the uAPI. + type: integer + # End netlink-raw diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml index 5d46ca966979..d1ebcd927149 100644 --- a/Documentation/netlink/specs/devlink.yaml +++ b/Documentation/netlink/specs/devlink.yaml @@ -6,6 +6,16 @@ protocol: genetlink-legacy doc: Partial family for Devlink. +definitions: + - + type: enum + name: sb-pool-type + entries: + - + name: ingress + - + name: egress + attribute-sets: - name: devlink @@ -25,6 +35,46 @@ attribute-sets: # TODO: fill in the attributes in between - + name: sb-index + type: u32 + value: 11 + + # TODO: fill in the attributes in between + + - + name: sb-pool-index + type: u16 + value: 17 + + - + name: sb-pool-type + type: u8 + enum: sb-pool-type + + # TODO: fill in the attributes in between + + - + name: sb-tc-index + type: u16 + value: 22 + + # TODO: fill in the attributes in between + + - + name: param-name + type: string + value: 81 + + # TODO: fill in the attributes in between + + - + name: region-name + type: string + value: 88 + + # TODO: fill in the attributes in between + + - name: info-driver-name type: string value: 98 @@ -56,9 +106,34 @@ attribute-sets: # TODO: fill in the attributes in between - + name: health-reporter-name + type: string + value: 115 + + # TODO: fill in the attributes in between + + - + name: trap-name + type: string + value: 130 + + # TODO: fill in the attributes in between + + - + name: trap-group-name + type: string + value: 135 + + - name: reload-failed type: u8 - value: 136 + + # TODO: fill in the attributes in between + + - + name: trap-policer-id + type: u32 + value: 142 # TODO: fill in the attributes in between @@ -103,6 +178,21 @@ attribute-sets: type: nest multi-attr: true nested-attributes: dl-reload-act-stats + + # TODO: fill in the attributes in between + + - + name: rate-node-name + type: string + value: 168 + + # TODO: fill in the attributes in between + + - + name: linecard-index + type: u32 + value: 171 + - name: dl-dev-stats subset-of: devlink @@ -165,8 +255,13 @@ operations: name: get doc: Get devlink instances. attribute-set: devlink + dont-validate: + - strict + - dump do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit request: value: 1 attributes: &dev-id-attrs @@ -183,18 +278,212 @@ operations: dump: reply: *get-reply + - + name: port-get + doc: Get devlink port instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + value: 5 + attributes: &port-id-attrs + - bus-name + - dev-name + - port-index + reply: + value: 7 + attributes: *port-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: + value: 3 # due to a bug, port dump returns DEVLINK_CMD_NEW + attributes: *port-id-attrs + + # TODO: fill in the operations in between + + - + name: sb-get + doc: Get shared buffer instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 11 + attributes: &sb-id-attrs + - bus-name + - dev-name + - sb-index + reply: &sb-get-reply + value: 11 + attributes: *sb-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *sb-get-reply + + # TODO: fill in the operations in between + + - + name: sb-pool-get + doc: Get shared buffer pool instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 15 + attributes: &sb-pool-id-attrs + - bus-name + - dev-name + - sb-index + - sb-pool-index + reply: &sb-pool-get-reply + value: 15 + attributes: *sb-pool-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *sb-pool-get-reply + + # TODO: fill in the operations in between + + - + name: sb-port-pool-get + doc: Get shared buffer port-pool combinations and threshold. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + value: 19 + attributes: &sb-port-pool-id-attrs + - bus-name + - dev-name + - port-index + - sb-index + - sb-pool-index + reply: &sb-port-pool-get-reply + value: 19 + attributes: *sb-port-pool-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *sb-port-pool-get-reply + + # TODO: fill in the operations in between + + - + name: sb-tc-pool-bind-get + doc: Get shared buffer port-TC to pool bindings and threshold. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + value: 23 + attributes: &sb-tc-pool-bind-id-attrs + - bus-name + - dev-name + - port-index + - sb-index + - sb-pool-type + - sb-tc-index + reply: &sb-tc-pool-bind-get-reply + value: 23 + attributes: *sb-tc-pool-bind-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *sb-tc-pool-bind-get-reply + + # TODO: fill in the operations in between + + - + name: param-get + doc: Get param instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 38 + attributes: ¶m-id-attrs + - bus-name + - dev-name + - param-name + reply: ¶m-get-reply + value: 38 + attributes: *param-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *param-get-reply + + # TODO: fill in the operations in between + + - + name: region-get + doc: Get region instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + value: 42 + attributes: ®ion-id-attrs + - bus-name + - dev-name + - port-index + - region-name + reply: ®ion-get-reply + value: 42 + attributes: *region-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *region-get-reply + # TODO: fill in the operations in between - name: info-get doc: Get device information, like driver name, hardware and firmware versions etc. attribute-set: devlink + dont-validate: + - strict + - dump do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit request: value: 51 attributes: *dev-id-attrs - reply: + reply: &info-get-reply value: 51 attributes: - bus-name @@ -204,3 +493,181 @@ operations: - info-version-fixed - info-version-running - info-version-stored + dump: + reply: *info-get-reply + + - + name: health-reporter-get + doc: Get health reporter instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: &health-reporter-id-attrs + - bus-name + - dev-name + - port-index + - health-reporter-name + reply: &health-reporter-get-reply + attributes: *health-reporter-id-attrs + dump: + request: + attributes: *port-id-attrs + reply: *health-reporter-get-reply + + # TODO: fill in the operations in between + + - + name: trap-get + doc: Get trap instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 61 + attributes: &trap-id-attrs + - bus-name + - dev-name + - trap-name + reply: &trap-get-reply + value: 61 + attributes: *trap-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *trap-get-reply + + # TODO: fill in the operations in between + + - + name: trap-group-get + doc: Get trap group instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 65 + attributes: &trap-group-id-attrs + - bus-name + - dev-name + - trap-group-name + reply: &trap-group-get-reply + value: 65 + attributes: *trap-group-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *trap-group-get-reply + + # TODO: fill in the operations in between + + - + name: trap-policer-get + doc: Get trap policer instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 69 + attributes: &trap-policer-id-attrs + - bus-name + - dev-name + - trap-policer-id + reply: &trap-policer-get-reply + value: 69 + attributes: *trap-policer-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *trap-policer-get-reply + + # TODO: fill in the operations in between + + - + name: rate-get + doc: Get rate instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 74 + attributes: &rate-id-attrs + - bus-name + - dev-name + - port-index + - rate-node-name + reply: &rate-get-reply + value: 74 + attributes: *rate-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *rate-get-reply + + # TODO: fill in the operations in between + + - + name: linecard-get + doc: Get line card instances. + attribute-set: devlink + dont-validate: + - strict + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 78 + attributes: &linecard-id-attrs + - bus-name + - dev-name + - linecard-index + reply: &linecard-get-reply + value: 78 + attributes: *linecard-id-attrs + dump: + request: + attributes: *dev-id-attrs + reply: *linecard-get-reply + + # TODO: fill in the operations in between + + - + name: selftests-get + doc: Get device selftest instances. + attribute-set: devlink + dont-validate: + - strict + - dump + + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 82 + attributes: *dev-id-attrs + reply: &selftests-get-reply + value: 82 + attributes: *dev-id-attrs + dump: + reply: *selftests-get-reply diff --git a/Documentation/netlink/specs/fou.yaml b/Documentation/netlink/specs/fou.yaml index 3e13826a3fdf..0af5ab842c04 100644 --- a/Documentation/netlink/specs/fou.yaml +++ b/Documentation/netlink/specs/fou.yaml @@ -107,16 +107,16 @@ operations: flags: [ admin-perm ] do: - request: &select_attrs + request: &select_attrs attributes: - - af - - ifindex - - port - - peer_port - - local_v4 - - peer_v4 - - local_v6 - - peer_v6 + - af + - ifindex + - port + - peer_port + - local_v4 + - peer_v4 + - local_v6 + - peer_v6 - name: get diff --git a/Documentation/netlink/specs/netdev.yaml b/Documentation/netlink/specs/netdev.yaml index b99e7ffef7a1..1c7284fd535b 100644 --- a/Documentation/netlink/specs/netdev.yaml +++ b/Documentation/netlink/specs/netdev.yaml @@ -14,7 +14,7 @@ definitions: - name: basic doc: - XDP feautues set supported by all drivers + XDP features set supported by all drivers (XDP_ABORTED, XDP_DROP, XDP_PASS, XDP_TX) - name: redirect @@ -62,6 +62,12 @@ attribute-sets: type: u64 enum: xdp-act enum-as-flags: true + - + name: xdp-zc-max-segs + doc: max fragment count supported by ZC driver + type: u32 + checks: + min: 1 operations: list: @@ -77,6 +83,7 @@ operations: attributes: - ifindex - xdp-features + - xdp-zc-max-segs dump: reply: *dev-all - diff --git a/Documentation/netlink/specs/ovs_vport.yaml b/Documentation/netlink/specs/ovs_vport.yaml index 17336455bec1..f65ce62cd60d 100644 --- a/Documentation/netlink/specs/ovs_vport.yaml +++ b/Documentation/netlink/specs/ovs_vport.yaml @@ -82,6 +82,10 @@ attribute-sets: enum-name: ovs-vport-attr attributes: - + name: unspec + type: unused + value: 0 + - name: port-no type: u32 - @@ -121,9 +125,34 @@ operations: name-prefix: ovs-vport-cmd- list: - + name: new + doc: Create a new OVS vport + attribute-set: vport + fixed-header: ovs-header + do: + request: + attributes: + - name + - type + - upcall-pid + - dp-ifindex + - ifindex + - options + - + name: del + doc: Delete existing OVS vport from a data path + attribute-set: vport + fixed-header: ovs-header + do: + request: + attributes: + - dp-ifindex + - port-no + - type + - name + - name: get doc: Get / dump OVS vport configuration and state - value: 3 attribute-set: vport fixed-header: ovs-header do: &vport-get-op diff --git a/Documentation/netlink/specs/rt_addr.yaml b/Documentation/netlink/specs/rt_addr.yaml new file mode 100644 index 000000000000..cbee1cedb177 --- /dev/null +++ b/Documentation/netlink/specs/rt_addr.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: rt-addr +protocol: netlink-raw +protonum: 0 + +doc: + Address configuration over rtnetlink. + +definitions: + - + name: ifaddrmsg + type: struct + members: + - + name: ifa-family + type: u8 + - + name: ifa-prefixlen + type: u8 + - + name: ifa-flags + type: u8 + enum: ifa-flags + enum-as-flags: true + - + name: ifa-scope + type: u8 + - + name: ifa-index + type: u32 + - + name: ifa-cacheinfo + type: struct + members: + - + name: ifa-prefered + type: u32 + - + name: ifa-valid + type: u32 + - + name: cstamp + type: u32 + - + name: tstamp + type: u32 + + - + name: ifa-flags + type: flags + entries: + - + name: secondary + - + name: nodad + - + name: optimistic + - + name: dadfailed + - + name: homeaddress + - + name: deprecated + - + name: tentative + - + name: permanent + - + name: managetempaddr + - + name: noprefixroute + - + name: mcautojoin + - + name: stable-privacy + +attribute-sets: + - + name: addr-attrs + attributes: + - + name: ifa-address + type: binary + display-hint: ipv4 + - + name: ifa-local + type: binary + display-hint: ipv4 + - + name: ifa-label + type: string + - + name: ifa-broadcast + type: binary + display-hint: ipv4 + - + name: ifa-anycast + type: binary + - + name: ifa-cacheinfo + type: binary + struct: ifa-cacheinfo + - + name: ifa-multicast + type: binary + - + name: ifa-flags + type: u32 + enum: ifa-flags + enum-as-flags: true + - + name: ifa-rt-priority + type: u32 + - + name: ifa-target-netnsid + type: binary + - + name: ifa-proto + type: u8 + + +operations: + fixed-header: ifaddrmsg + enum-model: directional + list: + - + name: newaddr + doc: Add new address + attribute-set: addr-attrs + do: + request: + value: 20 + attributes: &ifaddr-all + - ifa-family + - ifa-flags + - ifa-prefixlen + - ifa-scope + - ifa-index + - ifa-address + - ifa-label + - ifa-local + - ifa-cacheinfo + - + name: deladdr + doc: Remove address + attribute-set: addr-attrs + do: + request: + value: 21 + attributes: + - ifa-family + - ifa-flags + - ifa-prefixlen + - ifa-scope + - ifa-index + - ifa-address + - ifa-local + - + name: getaddr + doc: Dump address information. + attribute-set: addr-attrs + dump: + request: + value: 22 + attributes: + - ifa-index + reply: + value: 20 + attributes: *ifaddr-all + +mcast-groups: + list: + - + name: rtnlgrp-ipv4-ifaddr + value: 5 + - + name: rtnlgrp-ipv6-ifaddr + value: 9 diff --git a/Documentation/netlink/specs/rt_link.yaml b/Documentation/netlink/specs/rt_link.yaml new file mode 100644 index 000000000000..d86a68f8475c --- /dev/null +++ b/Documentation/netlink/specs/rt_link.yaml @@ -0,0 +1,1432 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: rt-link +protocol: netlink-raw +protonum: 0 + +doc: + Link configuration over rtnetlink. + +definitions: + - + name: ifinfo-flags + type: flags + entries: + - + name: up + - + name: broadcast + - + name: debug + - + name: loopback + - + name: point-to-point + - + name: no-trailers + - + name: running + - + name: no-arp + - + name: promisc + - + name: all-multi + - + name: master + - + name: slave + - + name: multicast + - + name: portsel + - + name: auto-media + - + name: dynamic + - + name: lower-up + - + name: dormant + - + name: echo + + - + name: rtgenmsg + type: struct + members: + - + name: family + type: u8 + - + name: ifinfomsg + type: struct + members: + - + name: ifi-family + type: u8 + - + name: padding + type: u8 + - + name: ifi-type + type: u16 + - + name: ifi-index + type: s32 + - + name: ifi-flags + type: u32 + enum: ifinfo-flags + enum-as-flags: true + - + name: ifi-change + type: u32 + - + name: ifla-cacheinfo + type: struct + members: + - + name: max-reasm-len + type: u32 + - + name: tstamp + type: u32 + - + name: reachable-time + type: s32 + - + name: retrans-time + type: u32 + - + name: rtnl-link-stats + type: struct + members: + - + name: rx-packets + type: u32 + - + name: tx-packets + type: u32 + - + name: rx-bytes + type: u32 + - + name: tx-bytes + type: u32 + - + name: rx-errors + type: u32 + - + name: tx-errors + type: u32 + - + name: rx-dropped + type: u32 + - + name: tx-dropped + type: u32 + - + name: multicast + type: u32 + - + name: collisions + type: u32 + - + name: rx-length-errors + type: u32 + - + name: rx-over-errors + type: u32 + - + name: rx-crc-errors + type: u32 + - + name: rx-frame-errors + type: u32 + - + name: rx-fifo-errors + type: u32 + - + name: rx-missed-errors + type: u32 + - + name: tx-aborted-errors + type: u32 + - + name: tx-carrier-errors + type: u32 + - + name: tx-fifo-errors + type: u32 + - + name: tx-heartbeat-errors + type: u32 + - + name: tx-window-errors + type: u32 + - + name: rx-compressed + type: u32 + - + name: tx-compressed + type: u32 + - + name: rx-nohandler + type: u32 + - + name: rtnl-link-stats64 + type: struct + members: + - + name: rx-packets + type: u64 + - + name: tx-packets + type: u64 + - + name: rx-bytes + type: u64 + - + name: tx-bytes + type: u64 + - + name: rx-errors + type: u64 + - + name: tx-errors + type: u64 + - + name: rx-dropped + type: u64 + - + name: tx-dropped + type: u64 + - + name: multicast + type: u64 + - + name: collisions + type: u64 + - + name: rx-length-errors + type: u64 + - + name: rx-over-errors + type: u64 + - + name: rx-crc-errors + type: u64 + - + name: rx-frame-errors + type: u64 + - + name: rx-fifo-errors + type: u64 + - + name: rx-missed-errors + type: u64 + - + name: tx-aborted-errors + type: u64 + - + name: tx-carrier-errors + type: u64 + - + name: tx-fifo-errors + type: u64 + - + name: tx-heartbeat-errors + type: u64 + - + name: tx-window-errors + type: u64 + - + name: rx-compressed + type: u64 + - + name: tx-compressed + type: u64 + - + name: rx-nohandler + type: u64 + - + name: rx-otherhost-dropped + type: u64 + - + name: rtnl-link-ifmap + type: struct + members: + - + name: mem-start + type: u64 + - + name: mem-end + type: u64 + - + name: base-addr + type: u64 + - + name: irq + type: u16 + - + name: dma + type: u8 + - + name: port + type: u8 + - + name: ipv4-devconf + type: struct + members: + - + name: forwarding + type: u32 + - + name: mc-forwarding + type: u32 + - + name: proxy-arp + type: u32 + - + name: accept-redirects + type: u32 + - + name: secure-redirects + type: u32 + - + name: send-redirects + type: u32 + - + name: shared-media + type: u32 + - + name: rp-filter + type: u32 + - + name: accept-source-route + type: u32 + - + name: bootp-relay + type: u32 + - + name: log-martians + type: u32 + - + name: tag + type: u32 + - + name: arpfilter + type: u32 + - + name: medium-id + type: u32 + - + name: noxfrm + type: u32 + - + name: nopolicy + type: u32 + - + name: force-igmp-version + type: u32 + - + name: arp-announce + type: u32 + - + name: arp-ignore + type: u32 + - + name: promote-secondaries + type: u32 + - + name: arp-accept + type: u32 + - + name: arp-notify + type: u32 + - + name: accept-local + type: u32 + - + name: src-vmark + type: u32 + - + name: proxy-arp-pvlan + type: u32 + - + name: route-localnet + type: u32 + - + name: igmpv2-unsolicited-report-interval + type: u32 + - + name: igmpv3-unsolicited-report-interval + type: u32 + - + name: ignore-routes-with-linkdown + type: u32 + - + name: drop-unicast-in-l2-multicast + type: u32 + - + name: drop-gratuitous-arp + type: u32 + - + name: bc-forwarding + type: u32 + - + name: arp-evict-nocarrier + type: u32 + - + name: ipv6-devconf + type: struct + members: + - + name: forwarding + type: u32 + - + name: hoplimit + type: u32 + - + name: mtu6 + type: u32 + - + name: accept-ra + type: u32 + - + name: accept-redirects + type: u32 + - + name: autoconf + type: u32 + - + name: dad-transmits + type: u32 + - + name: rtr-solicits + type: u32 + - + name: rtr-solicit-interval + type: u32 + - + name: rtr-solicit-delay + type: u32 + - + name: use-tempaddr + type: u32 + - + name: temp-valid-lft + type: u32 + - + name: temp-prefered-lft + type: u32 + - + name: regen-max-retry + type: u32 + - + name: max-desync-factor + type: u32 + - + name: max-addresses + type: u32 + - + name: force-mld-version + type: u32 + - + name: accept-ra-defrtr + type: u32 + - + name: accept-ra-pinfo + type: u32 + - + name: accept-ra-rtr-pref + type: u32 + - + name: rtr-probe-interval + type: u32 + - + name: accept-ra-rt-info-max-plen + type: u32 + - + name: proxy-ndp + type: u32 + - + name: optimistic-dad + type: u32 + - + name: accept-source-route + type: u32 + - + name: mc-forwarding + type: u32 + - + name: disable-ipv6 + type: u32 + - + name: accept-dad + type: u32 + - + name: force-tllao + type: u32 + - + name: ndisc-notify + type: u32 + - + name: mldv1-unsolicited-report-interval + type: u32 + - + name: mldv2-unsolicited-report-interval + type: u32 + - + name: suppress-frag-ndisc + type: u32 + - + name: accept-ra-from-local + type: u32 + - + name: use-optimistic + type: u32 + - + name: accept-ra-mtu + type: u32 + - + name: stable-secret + type: u32 + - + name: use-oif-addrs-only + type: u32 + - + name: accept-ra-min-hop-limit + type: u32 + - + name: ignore-routes-with-linkdown + type: u32 + - + name: drop-unicast-in-l2-multicast + type: u32 + - + name: drop-unsolicited-na + type: u32 + - + name: keep-addr-on-down + type: u32 + - + name: rtr-solicit-max-interval + type: u32 + - + name: seg6-enabled + type: u32 + - + name: seg6-require-hmac + type: u32 + - + name: enhanced-dad + type: u32 + - + name: addr-gen-mode + type: u8 + - + name: disable-policy + type: u32 + - + name: accept-ra-rt-info-min-plen + type: u32 + - + name: ndisc-tclass + type: u32 + - + name: rpl-seg-enabled + type: u32 + - + name: ra-defrtr-metric + type: u32 + - + name: ioam6-enabled + type: u32 + - + name: ioam6-id + type: u32 + - + name: ioam6-id-wide + type: u32 + - + name: ndisc-evict-nocarrier + type: u32 + - + name: accept-untracked-na + type: u32 + - + name: ifla-icmp6-stats + type: struct + members: + - + name: inmsgs + type: u64 + - + name: inerrors + type: u64 + - + name: outmsgs + type: u64 + - + name: outerrors + type: u64 + - + name: csumerrors + type: u64 + - + name: ratelimithost + type: u64 + - + name: ifla-inet6-stats + type: struct + members: + - + name: inpkts + type: u64 + - + name: inoctets + type: u64 + - + name: indelivers + type: u64 + - + name: outforwdatagrams + type: u64 + - + name: outpkts + type: u64 + - + name: outoctets + type: u64 + - + name: inhdrerrors + type: u64 + - + name: intoobigerrors + type: u64 + - + name: innoroutes + type: u64 + - + name: inaddrerrors + type: u64 + - + name: inunknownprotos + type: u64 + - + name: intruncatedpkts + type: u64 + - + name: indiscards + type: u64 + - + name: outdiscards + type: u64 + - + name: outnoroutes + type: u64 + - + name: reasmtimeout + type: u64 + - + name: reasmreqds + type: u64 + - + name: reasmoks + type: u64 + - + name: reasmfails + type: u64 + - + name: fragoks + type: u64 + - + name: fragfails + type: u64 + - + name: fragcreates + type: u64 + - + name: inmcastpkts + type: u64 + - + name: outmcastpkts + type: u64 + - + name: inbcastpkts + type: u64 + - + name: outbcastpkts + type: u64 + - + name: inmcastoctets + type: u64 + - + name: outmcastoctets + type: u64 + - + name: inbcastoctets + type: u64 + - + name: outbcastoctets + type: u64 + - + name: csumerrors + type: u64 + - + name: noectpkts + type: u64 + - + name: ect1-pkts + type: u64 + - + name: ect0-pkts + type: u64 + - + name: cepkts + type: u64 + - + name: reasm-overlaps + type: u64 + - name: br-boolopt-multi + type: struct + members: + - + name: optval + type: u32 + - + name: optmask + type: u32 + - + name: if_stats_msg + type: struct + members: + - + name: family + type: u8 + - + name: pad1 + type: u8 + - + name: pad2 + type: u16 + - + name: ifindex + type: u32 + - + name: filter-mask + type: u32 + + +attribute-sets: + - + name: link-attrs + name-prefix: ifla- + attributes: + - + name: address + type: binary + display-hint: mac + - + name: broadcast + type: binary + display-hint: mac + - + name: ifname + type: string + - + name: mtu + type: u32 + - + name: link + type: u32 + - + name: qdisc + type: string + - + name: stats + type: binary + struct: rtnl-link-stats + - + name: cost + type: string + - + name: priority + type: string + - + name: master + type: u32 + - + name: wireless + type: string + - + name: protinfo + type: string + - + name: txqlen + type: u32 + - + name: map + type: binary + struct: rtnl-link-ifmap + - + name: weight + type: u32 + - + name: operstate + type: u8 + - + name: linkmode + type: u8 + - + name: linkinfo + type: nest + nested-attributes: linkinfo-attrs + - + name: net-ns-pid + type: u32 + - + name: ifalias + type: string + - + name: num-vf + type: u32 + - + name: vfinfo-list + type: nest + nested-attributes: vfinfo-attrs + - + name: stats64 + type: binary + struct: rtnl-link-stats64 + - + name: vf-ports + type: nest + nested-attributes: vf-ports-attrs + - + name: port-self + type: nest + nested-attributes: port-self-attrs + - + name: af-spec + type: nest + nested-attributes: af-spec-attrs + - + name: group + type: u32 + - + name: net-ns-fd + type: u32 + - + name: ext-mask + type: u32 + - + name: promiscuity + type: u32 + - + name: num-tx-queues + type: u32 + - + name: num-rx-queues + type: u32 + - + name: carrier + type: u8 + - + name: phys-port-id + type: binary + - + name: carrier-changes + type: u32 + - + name: phys-switch-id + type: binary + - + name: link-netnsid + type: s32 + - + name: phys-port-name + type: string + - + name: proto-down + type: u8 + - + name: gso-max-segs + type: u32 + - + name: gso-max-size + type: u32 + - + name: pad + type: pad + - + name: xdp + type: nest + nested-attributes: xdp-attrs + - + name: event + type: u32 + - + name: new-netnsid + type: s32 + - + name: target-netnsid + type: s32 + - + name: carrier-up-count + type: u32 + - + name: carrier-down-count + type: u32 + - + name: new-ifindex + type: s32 + - + name: min-mtu + type: u32 + - + name: max-mtu + type: u32 + - + name: prop-list + type: nest + nested-attributes: link-attrs + - + name: alt-ifname + type: string + multi-attr: true + - + name: perm-address + type: binary + display-hint: mac + - + name: proto-down-reason + type: string + - + name: parent-dev-name + type: string + - + name: parent-dev-bus-name + type: string + - + name: gro-max-size + type: u32 + - + name: tso-max-size + type: u32 + - + name: tso-max-segs + type: u32 + - + name: allmulti + type: u32 + - + name: devlink-port + type: binary + - + name: gso-ipv4-max-size + type: u32 + - + name: gro-ipv4-max-size + type: u32 + - + name: af-spec-attrs + attributes: + - + name: "inet" + type: nest + value: 2 + nested-attributes: ifla-attrs + - + name: "inet6" + type: nest + value: 10 + nested-attributes: ifla6-attrs + - + name: "mctp" + type: nest + value: 45 + nested-attributes: mctp-attrs + - + name: vfinfo-attrs + attributes: [] + - + name: vf-ports-attrs + attributes: [] + - + name: port-self-attrs + attributes: [] + - + name: linkinfo-attrs + attributes: + - + name: kind + type: string + - + name: data + type: binary + # kind specific nest, e.g. linkinfo-bridge-attrs + - + name: xstats + type: binary + - + name: slave-kind + type: string + - + name: slave-data + type: binary + # kind specific nest + - + name: linkinfo-bridge-attrs + attributes: + - + name: forward-delay + type: u32 + - + name: hello-time + type: u32 + - + name: max-age + type: u32 + - + name: ageing-time + type: u32 + - + name: stp-state + type: u32 + - + name: priority + type: u16 + - + name: vlan-filtering + type: u8 + - + name: vlan-protocol + type: u16 + - + name: group-fwd-mask + type: u16 + - + name: root-id + type: binary + - + name: bridge-id + type: binary + - + name: root-port + type: u16 + - + name: root-path-cost + type: u32 + - + name: topology-change + type: u8 + - + name: topology-change-detected + type: u8 + - + name: hello-timer + type: u64 + - + name: tcn-timer + type: u64 + - + name: topology-change-timer + type: u64 + - + name: gc-timer + type: u64 + - + name: group-addr + type: binary + - + name: fdb-flush + type: binary + - + name: mcast-router + type: u8 + - + name: mcast-snooping + type: u8 + - + name: mcast-query-use-ifaddr + type: u8 + - + name: mcast-querier + type: u8 + - + name: mcast-hash-elasticity + type: u32 + - + name: mcast-hash-max + type: u32 + - + name: mcast-last-member-cnt + type: u32 + - + name: mcast-startup-query-cnt + type: u32 + - + name: mcast-last-member-intvl + type: u64 + - + name: mcast-membership-intvl + type: u64 + - + name: mcast-querier-intvl + type: u64 + - + name: mcast-query-intvl + type: u64 + - + name: mcast-query-response-intvl + type: u64 + - + name: mcast-startup-query-intvl + type: u64 + - + name: nf-call-iptables + type: u8 + - + name: nf-call-ip6-tables + type: u8 + - + name: nf-call-arptables + type: u8 + - + name: vlan-default-pvid + type: u16 + - + name: pad + type: pad + - + name: vlan-stats-enabled + type: u8 + - + name: mcast-stats-enabled + type: u8 + - + name: mcast-igmp-version + type: u8 + - + name: mcast-mld-version + type: u8 + - + name: vlan-stats-per-port + type: u8 + - + name: multi-boolopt + type: binary + struct: br-boolopt-multi + - + name: mcast-querier-state + type: binary + - + name: xdp-attrs + attributes: + - + name: fd + type: s32 + - + name: attached + type: u8 + - + name: flags + type: u32 + - + name: prog-id + type: u32 + - + name: drv-prog-id + type: u32 + - + name: skb-prog-id + type: u32 + - + name: hw-prog-id + type: u32 + - + name: expected-fd + type: s32 + - + name: ifla-attrs + attributes: + - + name: conf + type: binary + struct: ipv4-devconf + - + name: ifla6-attrs + attributes: + - + name: flags + type: u32 + - + name: conf + type: binary + struct: ipv6-devconf + - + name: stats + type: binary + struct: ifla-inet6-stats + - + name: mcast + type: binary + - + name: cacheinfo + type: binary + struct: ifla-cacheinfo + - + name: icmp6-stats + type: binary + struct: ifla-icmp6-stats + - + name: token + type: binary + - + name: addr-gen-mode + type: u8 + - + name: ra-mtu + type: u32 + - + name: mctp-attrs + attributes: + - + name: mctp-net + type: u32 + - + name: stats-attrs + name-prefix: ifla-stats- + attributes: + - + name: link-64 + type: binary + struct: rtnl-link-stats64 + - + name: link-xstats + type: binary + - + name: link-xstats-slave + type: binary + - + name: link-offload-xstats + type: nest + nested-attributes: link-offload-xstats + - + name: af-spec + type: binary + - + name: link-offload-xstats + attributes: + - + name: cpu-hit + type: binary + - + name: hw-s-info + type: array-nest + nested-attributes: hw-s-info-one + - + name: l3-stats + type: binary + - + name: hw-s-info-one + attributes: + - + name: request + type: u8 + - + name: used + type: u8 + +operations: + enum-model: directional + list: + - + name: newlink + doc: Create a new link. + attribute-set: link-attrs + fixed-header: ifinfomsg + do: + request: + value: 16 + attributes: &link-new-attrs + - ifi-index + - ifname + - net-ns-pid + - net-ns-fd + - target-netnsid + - link-netnsid + - linkinfo + - group + - num-tx-queues + - num-rx-queues + - address + - broadcast + - mtu + - txqlen + - operstate + - linkmode + - group + - gso-max-size + - gso-max-segs + - gro-max-size + - gso-ipv4-max-size + - gro-ipv4-max-size + - af-spec + - + name: dellink + doc: Delete an existing link. + attribute-set: link-attrs + fixed-header: ifinfomsg + do: + request: + value: 17 + attributes: + - ifi-index + - ifname + - + name: getlink + doc: Get / dump information about a link. + attribute-set: link-attrs + fixed-header: ifinfomsg + do: + request: + value: 18 + attributes: + - ifi-index + - ifname + - alt-ifname + - ext-mask + - target-netnsid + reply: + value: 16 + attributes: &link-all-attrs + - ifi-family + - ifi-type + - ifi-index + - ifi-flags + - ifi-change + - address + - broadcast + - ifname + - mtu + - link + - qdisc + - stats + - cost + - priority + - master + - wireless + - protinfo + - txqlen + - map + - weight + - operstate + - linkmode + - linkinfo + - net-ns-pid + - ifalias + - num-vf + - vfinfo-list + - stats64 + - vf-ports + - port-self + - af-spec + - group + - net-ns-fd + - ext-mask + - promiscuity + - num-tx-queues + - num-rx-queues + - carrier + - phys-port-id + - carrier-changes + - phys-switch-id + - link-netnsid + - phys-port-name + - proto-down + - gso-max-segs + - gso-max-size + - pad + - xdp + - event + - new-netnsid + - if-netnsid + - target-netnsid + - carrier-up-count + - carrier-down-count + - new-ifindex + - min-mtu + - max-mtu + - prop-list + - alt-ifname + - perm-address + - proto-down-reason + - parent-dev-name + - parent-dev-bus-name + - gro-max-size + - tso-max-size + - tso-max-segs + - allmulti + - devlink-port + - gso-ipv4-max-size + - gro-ipv4-max-size + dump: + request: + value: 18 + attributes: + - target-netnsid + - ext-mask + - master + - linkinfo + reply: + value: 16 + attributes: *link-all-attrs + - + name: setlink + doc: Set information about a link. + attribute-set: link-attrs + fixed-header: ifinfomsg + do: + request: + value: 19 + attributes: *link-all-attrs + - + name: getstats + doc: Get / dump link stats. + attribute-set: stats-attrs + fixed-header: if_stats_msg + do: + request: + value: 94 + attributes: + - ifindex + reply: + value: 92 + attributes: &link-stats-attrs + - family + - ifindex + - filter-mask + - link-64 + - link-xstats + - link-xstats-slave + - link-offload-xstats + - af-spec + dump: + request: + value: 94 + reply: + value: 92 + attributes: *link-stats-attrs + +mcast-groups: + list: + - + name: rtnlgrp-link + value: 1 + - + name: rtnlgrp-stats + value: 36 diff --git a/Documentation/netlink/specs/rt_route.yaml b/Documentation/netlink/specs/rt_route.yaml new file mode 100644 index 000000000000..f4368be0caed --- /dev/null +++ b/Documentation/netlink/specs/rt_route.yaml @@ -0,0 +1,327 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: rt-route +protocol: netlink-raw +protonum: 0 + +doc: + Route configuration over rtnetlink. + +definitions: + - + name: rtm-type + name-prefix: rtn- + type: enum + entries: + - unspec + - unicast + - local + - broadcast + - anycast + - multicast + - blackhole + - unreachable + - prohibit + - throw + - nat + - xresolve + - + name: rtmsg + type: struct + members: + - + name: rtm-family + type: u8 + - + name: rtm-dst-len + type: u8 + - + name: rtm-src-len + type: u8 + - + name: rtm-tos + type: u8 + - + name: rtm-table + type: u8 + - + name: rtm-protocol + type: u8 + - + name: rtm-scope + type: u8 + - + name: rtm-type + type: u8 + enum: rtm-type + - + name: rtm-flags + type: u32 + - + name: rta-cacheinfo + type: struct + members: + - + name: rta-clntref + type: u32 + - + name: rta-lastuse + type: u32 + - + name: rta-expires + type: u32 + - + name: rta-error + type: u32 + - + name: rta-used + type: u32 + +attribute-sets: + - + name: route-attrs + attributes: + - + name: rta-dst + type: binary + display-hint: ipv4 + - + name: rta-src + type: binary + display-hint: ipv4 + - + name: rta-iif + type: u32 + - + name: rta-oif + type: u32 + - + name: rta-gateway + type: binary + display-hint: ipv4 + - + name: rta-priority + type: u32 + - + name: rta-prefsrc + type: binary + display-hint: ipv4 + - + name: rta-metrics + type: nest + nested-attributes: rta-metrics + - + name: rta-multipath + type: binary + - + name: rta-protoinfo # not used + type: binary + - + name: rta-flow + type: u32 + - + name: rta-cacheinfo + type: binary + struct: rta-cacheinfo + - + name: rta-session # not used + type: binary + - + name: rta-mp-algo # not used + type: binary + - + name: rta-table + type: u32 + - + name: rta-mark + type: u32 + - + name: rta-mfc-stats + type: binary + - + name: rta-via + type: binary + - + name: rta-newdst + type: binary + - + name: rta-pref + type: u8 + - + name: rta-encap-type + type: u16 + - + name: rta-encap + type: binary # tunnel specific nest + - + name: rta-expires + type: u32 + - + name: rta-pad + type: binary + - + name: rta-uid + type: u32 + - + name: rta-ttl-propagate + type: u8 + - + name: rta-ip-proto + type: u8 + - + name: rta-sport + type: u16 + - + name: rta-dport + type: u16 + - + name: rta-nh-id + type: u32 + - + name: rta-metrics + attributes: + - + name: rtax-unspec + type: unused + value: 0 + - + name: rtax-lock + type: u32 + - + name: rtax-mtu + type: u32 + - + name: rtax-window + type: u32 + - + name: rtax-rtt + type: u32 + - + name: rtax-rttvar + type: u32 + - + name: rtax-ssthresh + type: u32 + - + name: rtax-cwnd + type: u32 + - + name: rtax-advmss + type: u32 + - + name: rtax-reordering + type: u32 + - + name: rtax-hoplimit + type: u32 + - + name: rtax-initcwnd + type: u32 + - + name: rtax-features + type: u32 + - + name: rtax-rto-min + type: u32 + - + name: rtax-initrwnd + type: u32 + - + name: rtax-quickack + type: u32 + - + name: rtax-cc-algo + type: string + - + name: rtax-fastopen-no-cookie + type: u32 + +operations: + enum-model: directional + list: + - + name: getroute + doc: Dump route information. + attribute-set: route-attrs + fixed-header: rtmsg + do: + request: + value: 26 + attributes: + - rtm-family + - rta-src + - rtm-src-len + - rta-dst + - rtm-dst-len + - rta-iif + - rta-oif + - rta-ip-proto + - rta-sport + - rta-dport + - rta-mark + - rta-uid + reply: + value: 24 + attributes: &all-route-attrs + - rtm-family + - rtm-dst-len + - rtm-src-len + - rtm-tos + - rtm-table + - rtm-protocol + - rtm-scope + - rtm-type + - rtm-flags + - rta-dst + - rta-src + - rta-iif + - rta-oif + - rta-gateway + - rta-priority + - rta-prefsrc + - rta-metrics + - rta-multipath + - rta-flow + - rta-cacheinfo + - rta-table + - rta-mark + - rta-mfc-stats + - rta-via + - rta-newdst + - rta-pref + - rta-encap-type + - rta-encap + - rta-expires + - rta-pad + - rta-uid + - rta-ttl-propagate + - rta-ip-proto + - rta-sport + - rta-dport + - rta-nh-id + dump: + request: + value: 26 + attributes: + - rtm-family + reply: + value: 24 + attributes: *all-route-attrs + - + name: newroute + doc: Create a new route + attribute-set: route-attrs + fixed-header: rtmsg + do: + request: + value: 24 + attributes: *all-route-attrs + - + name: delroute + doc: Delete an existing route + attribute-set: route-attrs + fixed-header: rtmsg + do: + request: + value: 25 + attributes: *all-route-attrs diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst index 1cc35de336a4..dceeb0d763aa 100644 --- a/Documentation/networking/af_xdp.rst +++ b/Documentation/networking/af_xdp.rst @@ -462,8 +462,92 @@ XDP_OPTIONS getsockopt Gets options from an XDP socket. The only one supported so far is XDP_OPTIONS_ZEROCOPY which tells you if zero-copy is on or not. +Multi-Buffer Support +==================== + +With multi-buffer support, programs using AF_XDP sockets can receive +and transmit packets consisting of multiple buffers both in copy and +zero-copy mode. For example, a packet can consist of two +frames/buffers, one with the header and the other one with the data, +or a 9K Ethernet jumbo frame can be constructed by chaining together +three 4K frames. + +Some definitions: + +* A packet consists of one or more frames + +* A descriptor in one of the AF_XDP rings always refers to a single + frame. In the case the packet consists of a single frame, the + descriptor refers to the whole packet. + +To enable multi-buffer support for an AF_XDP socket, use the new bind +flag XDP_USE_SG. If this is not provided, all multi-buffer packets +will be dropped just as before. Note that the XDP program loaded also +needs to be in multi-buffer mode. This can be accomplished by using +"xdp.frags" as the section name of the XDP program used. + +To represent a packet consisting of multiple frames, a new flag called +XDP_PKT_CONTD is introduced in the options field of the Rx and Tx +descriptors. If it is true (1) the packet continues with the next +descriptor and if it is false (0) it means this is the last descriptor +of the packet. Why the reverse logic of end-of-packet (eop) flag found +in many NICs? Just to preserve compatibility with non-multi-buffer +applications that have this bit set to false for all packets on Rx, +and the apps set the options field to zero for Tx, as anything else +will be treated as an invalid descriptor. + +These are the semantics for producing packets onto AF_XDP Tx ring +consisting of multiple frames: + +* When an invalid descriptor is found, all the other + descriptors/frames of this packet are marked as invalid and not + completed. The next descriptor is treated as the start of a new + packet, even if this was not the intent (because we cannot guess + the intent). As before, if your program is producing invalid + descriptors you have a bug that must be fixed. + +* Zero length descriptors are treated as invalid descriptors. + +* For copy mode, the maximum supported number of frames in a packet is + equal to CONFIG_MAX_SKB_FRAGS + 1. If it is exceeded, all + descriptors accumulated so far are dropped and treated as + invalid. To produce an application that will work on any system + regardless of this config setting, limit the number of frags to 18, + as the minimum value of the config is 17. + +* For zero-copy mode, the limit is up to what the NIC HW + supports. Usually at least five on the NICs we have checked. We + consciously chose to not enforce a rigid limit (such as + CONFIG_MAX_SKB_FRAGS + 1) for zero-copy mode, as it would have + resulted in copy actions under the hood to fit into what limit the + NIC supports. Kind of defeats the purpose of zero-copy mode. How to + probe for this limit is explained in the "probe for multi-buffer + support" section. + +On the Rx path in copy-mode, the xsk core copies the XDP data into +multiple descriptors, if needed, and sets the XDP_PKT_CONTD flag as +detailed before. Zero-copy mode works the same, though the data is not +copied. When the application gets a descriptor with the XDP_PKT_CONTD +flag set to one, it means that the packet consists of multiple buffers +and it continues with the next buffer in the following +descriptor. When a descriptor with XDP_PKT_CONTD == 0 is received, it +means that this is the last buffer of the packet. AF_XDP guarantees +that only a complete packet (all frames in the packet) is sent to the +application. If there is not enough space in the AF_XDP Rx ring, all +frames of the packet will be dropped. + +If application reads a batch of descriptors, using for example the libxdp +interfaces, it is not guaranteed that the batch will end with a full +packet. It might end in the middle of a packet and the rest of the +buffers of that packet will arrive at the beginning of the next batch, +since the libxdp interface does not read the whole ring (unless you +have an enormous batch size or a very small ring size). + +An example program each for Rx and Tx multi-buffer support can be found +later in this document. + Usage -===== +----- In order to use AF_XDP sockets two parts are needed. The user-space application and the XDP program. For a complete setup and @@ -541,6 +625,131 @@ like this: But please use the libbpf functions as they are optimized and ready to use. Will make your life easier. +Usage Multi-Buffer Rx +--------------------- + +Here is a simple Rx path pseudo-code example (using libxdp interfaces +for simplicity). Error paths have been excluded to keep it short: + +.. code-block:: c + + void rx_packets(struct xsk_socket_info *xsk) + { + static bool new_packet = true; + u32 idx_rx = 0, idx_fq = 0; + static char *pkt; + + int rcvd = xsk_ring_cons__peek(&xsk->rx, opt_batch_size, &idx_rx); + + xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq); + + for (int i = 0; i < rcvd; i++) { + struct xdp_desc *desc = xsk_ring_cons__rx_desc(&xsk->rx, idx_rx++); + char *frag = xsk_umem__get_data(xsk->umem->buffer, desc->addr); + bool eop = !(desc->options & XDP_PKT_CONTD); + + if (new_packet) + pkt = frag; + else + add_frag_to_pkt(pkt, frag); + + if (eop) + process_pkt(pkt); + + new_packet = eop; + + *xsk_ring_prod__fill_addr(&xsk->umem->fq, idx_fq++) = desc->addr; + } + + xsk_ring_prod__submit(&xsk->umem->fq, rcvd); + xsk_ring_cons__release(&xsk->rx, rcvd); + } + +Usage Multi-Buffer Tx +--------------------- + +Here is an example Tx path pseudo-code (using libxdp interfaces for +simplicity) ignoring that the umem is finite in size, and that we +eventually will run out of packets to send. Also assumes pkts.addr +points to a valid location in the umem. + +.. code-block:: c + + void tx_packets(struct xsk_socket_info *xsk, struct pkt *pkts, + int batch_size) + { + u32 idx, i, pkt_nb = 0; + + xsk_ring_prod__reserve(&xsk->tx, batch_size, &idx); + + for (i = 0; i < batch_size;) { + u64 addr = pkts[pkt_nb].addr; + u32 len = pkts[pkt_nb].size; + + do { + struct xdp_desc *tx_desc; + + tx_desc = xsk_ring_prod__tx_desc(&xsk->tx, idx + i++); + tx_desc->addr = addr; + + if (len > xsk_frame_size) { + tx_desc->len = xsk_frame_size; + tx_desc->options = XDP_PKT_CONTD; + } else { + tx_desc->len = len; + tx_desc->options = 0; + pkt_nb++; + } + len -= tx_desc->len; + addr += xsk_frame_size; + + if (i == batch_size) { + /* Remember len, addr, pkt_nb for next iteration. + * Skipped for simplicity. + */ + break; + } + } while (len); + } + + xsk_ring_prod__submit(&xsk->tx, i); + } + +Probing for Multi-Buffer Support +-------------------------------- + +To discover if a driver supports multi-buffer AF_XDP in SKB or DRV +mode, use the XDP_FEATURES feature of netlink in linux/netdev.h to +query for NETDEV_XDP_ACT_RX_SG support. This is the same flag as for +querying for XDP multi-buffer support. If XDP supports multi-buffer in +a driver, then AF_XDP will also support that in SKB and DRV mode. + +To discover if a driver supports multi-buffer AF_XDP in zero-copy +mode, use XDP_FEATURES and first check the NETDEV_XDP_ACT_XSK_ZEROCOPY +flag. If it is set, it means that at least zero-copy is supported and +you should go and check the netlink attribute +NETDEV_A_DEV_XDP_ZC_MAX_SEGS in linux/netdev.h. An unsigned integer +value will be returned stating the max number of frags that are +supported by this device in zero-copy mode. These are the possible +return values: + +1: Multi-buffer for zero-copy is not supported by this device, as max + one fragment supported means that multi-buffer is not possible. + +>=2: Multi-buffer is supported in zero-copy mode for this device. The + returned number signifies the max number of frags supported. + +For an example on how these are used through libbpf, please take a +look at tools/testing/selftests/bpf/xskxceiver.c. + +Multi-Buffer Support for Zero-Copy Drivers +------------------------------------------ + +Zero-copy drivers usually use the batched APIs for Rx and Tx +processing. Note that the Tx batch API guarantees that it will provide +a batch of Tx descriptors that ends with full packet at the end. This +to facilitate extending a zero-copy driver with multi-buffer support. + Sample application ================== diff --git a/Documentation/networking/device_drivers/ethernet/google/gve.rst b/Documentation/networking/device_drivers/ethernet/google/gve.rst index 6d73ee78f3d7..31d621bca82e 100644 --- a/Documentation/networking/device_drivers/ethernet/google/gve.rst +++ b/Documentation/networking/device_drivers/ethernet/google/gve.rst @@ -52,6 +52,15 @@ Descriptor Formats GVE supports two descriptor formats: GQI and DQO. These two formats have entirely different descriptors, which will be described below. +Addressing Mode +------------------ +GVE supports two addressing modes: QPL and RDA. +QPL ("queue-page-list") mode communicates data through a set of +pre-registered pages. + +For RDA ("raw DMA addressing") mode, the set of pages is dynamic. +Therefore, the packet buffers can be anywhere in guest memory. + Registers --------- All registers are MMIO. diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst index bfd233cfac35..1e196cb9ce25 100644 --- a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst +++ b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst @@ -332,3 +332,11 @@ Setup HTB offload # tc class add dev <interface> parent 1: classid 1:1 htb rate 10Gbit prio 1 # tc class add dev <interface> parent 1: classid 1:2 htb rate 10Gbit prio 7 + +4. Create tc classes with same priorities and different quantum:: + + # tc class add dev <interface> parent 1: classid 1:1 htb rate 10Gbit prio 2 quantum 409600 + + # tc class add dev <interface> parent 1: classid 1:2 htb rate 10Gbit prio 2 quantum 188416 + + # tc class add dev <interface> parent 1: classid 1:3 htb rate 10Gbit prio 2 quantum 32768 diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst index a395df9c2751..f69ee1ebee01 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst @@ -346,6 +346,24 @@ the software port. - The number of receive packets with CQE compression on ring i [#accel]_. - Acceleration + * - `rx[i]_arfs_add` + - The number of aRFS flow rules added to the device for direct RQ steering + on ring i [#accel]_. + - Acceleration + + * - `rx[i]_arfs_request_in` + - Number of flow rules that have been requested to move into ring i for + direct RQ steering [#accel]_. + - Acceleration + + * - `rx[i]_arfs_request_out` + - Number of flow rules that have been requested to move out of ring i [#accel]_. + - Acceleration + + * - `rx[i]_arfs_expired` + - Number of flow rules that have been expired and removed [#accel]_. + - Acceleration + * - `rx[i]_arfs_err` - Number of flow rules that failed to be added to the flow table. - Error @@ -445,11 +463,6 @@ the software port. context. - Error - * - `rx[i]_xsk_arfs_err` - - aRFS (accelerated Receive Flow Steering) does not occur in the XSK RQ - context, so this counter should never increment. - - Error - * - `rx[i]_xdp_tx_xmit` - The number of packets forwarded back to the port due to XDP program `XDP_TX` action (bouncing). these packets are not counted by other @@ -683,6 +696,12 @@ the software port. time protocol. - Error + * - `ptp_cq[i]_late_cqe` + - Number of times a CQE has been delivered on the PTP timestamping CQ when + the CQE was not expected since a certain amount of time had elapsed where + the device typically ensures not posting the CQE. + - Error + .. [#ring_global] The corresponding ring and global counters do not share the same name (i.e. do not follow the common naming scheme). diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst deleted file mode 100644 index a4edf908b707..000000000000 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst +++ /dev/null @@ -1,313 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB -.. include:: <isonum.txt> - -======= -Devlink -======= - -:Copyright: |copy| 2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved. - -Contents -======== - -- `Info`_ -- `Parameters`_ -- `Health reporters`_ - -Info -==== - -The devlink info reports the running and stored firmware versions on device. -It also prints the device PSID which represents the HCA board type ID. - -User command example:: - - $ devlink dev info pci/0000:00:06.0 - pci/0000:00:06.0: - driver mlx5_core - versions: - fixed: - fw.psid MT_0000000009 - running: - fw.version 16.26.0100 - stored: - fw.version 16.26.0100 - -Parameters -========== - -flow_steering_mode: Device flow steering mode ---------------------------------------------- -The flow steering mode parameter controls the flow steering mode of the driver. -Two modes are supported: - -1. 'dmfs' - Device managed flow steering. -2. 'smfs' - Software/Driver managed flow steering. - -In DMFS mode, the HW steering entities are created and managed through the -Firmware. -In SMFS mode, the HW steering entities are created and managed though by -the driver directly into hardware without firmware intervention. - -SMFS mode is faster and provides better rule insertion rate compared to default DMFS mode. - -User command examples: - -- Set SMFS flow steering mode:: - - $ devlink dev param set pci/0000:06:00.0 name flow_steering_mode value "smfs" cmode runtime - -- Read device flow steering mode:: - - $ devlink dev param show pci/0000:06:00.0 name flow_steering_mode - pci/0000:06:00.0: - name flow_steering_mode type driver-specific - values: - cmode runtime value smfs - -enable_roce: RoCE enablement state ----------------------------------- -If the device supports RoCE disablement, RoCE enablement state controls device -support for RoCE capability. Otherwise, the control occurs in the driver stack. -When RoCE is disabled at the driver level, only raw ethernet QPs are supported. - -To change RoCE enablement state, a user must change the driverinit cmode value -and run devlink reload. - -User command examples: - -- Disable RoCE:: - - $ devlink dev param set pci/0000:06:00.0 name enable_roce value false cmode driverinit - $ devlink dev reload pci/0000:06:00.0 - -- Read RoCE enablement state:: - - $ devlink dev param show pci/0000:06:00.0 name enable_roce - pci/0000:06:00.0: - name enable_roce type generic - values: - cmode driverinit value true - -esw_port_metadata: Eswitch port metadata state ----------------------------------------------- -When applicable, disabling eswitch metadata can increase packet rate -up to 20% depending on the use case and packet sizes. - -Eswitch port metadata state controls whether to internally tag packets with -metadata. Metadata tagging must be enabled for multi-port RoCE, failover -between representors and stacked devices. -By default metadata is enabled on the supported devices in E-switch. -Metadata is applicable only for E-switch in switchdev mode and -users may disable it when NONE of the below use cases will be in use: - -1. HCA is in Dual/multi-port RoCE mode. -2. VF/SF representor bonding (Usually used for Live migration) -3. Stacked devices - -When metadata is disabled, the above use cases will fail to initialize if -users try to enable them. - -- Show eswitch port metadata:: - - $ devlink dev param show pci/0000:06:00.0 name esw_port_metadata - pci/0000:06:00.0: - name esw_port_metadata type driver-specific - values: - cmode runtime value true - -- Disable eswitch port metadata:: - - $ devlink dev param set pci/0000:06:00.0 name esw_port_metadata value false cmode runtime - -- Change eswitch mode to switchdev mode where after choosing the metadata value:: - - $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev - -hairpin_num_queues: Number of hairpin queues --------------------------------------------- -We refer to a TC NIC rule that involves forwarding as "hairpin". - -Hairpin queues are mlx5 hardware specific implementation for hardware -forwarding of such packets. - -- Show the number of hairpin queues:: - - $ devlink dev param show pci/0000:06:00.0 name hairpin_num_queues - pci/0000:06:00.0: - name hairpin_num_queues type driver-specific - values: - cmode driverinit value 2 - -- Change the number of hairpin queues:: - - $ devlink dev param set pci/0000:06:00.0 name hairpin_num_queues value 4 cmode driverinit - -hairpin_queue_size: Size of the hairpin queues ----------------------------------------------- -Control the size of the hairpin queues. - -- Show the size of the hairpin queues:: - - $ devlink dev param show pci/0000:06:00.0 name hairpin_queue_size - pci/0000:06:00.0: - name hairpin_queue_size type driver-specific - values: - cmode driverinit value 1024 - -- Change the size (in packets) of the hairpin queues:: - - $ devlink dev param set pci/0000:06:00.0 name hairpin_queue_size value 512 cmode driverinit - -Health reporters -================ - -tx reporter ------------ -The tx reporter is responsible for reporting and recovering of the following two error scenarios: - -- tx timeout - Report on kernel tx timeout detection. - Recover by searching lost interrupts. -- tx error completion - Report on error tx completion. - Recover by flushing the tx queue and reset it. - -tx reporter also support on demand diagnose callback, on which it provides -real time information of its send queues status. - -User commands examples: - -- Diagnose send queues status:: - - $ devlink health diagnose pci/0000:82:00.0 reporter tx - -.. note:: - This command has valid output only when interface is up, otherwise the command has empty output. - -- Show number of tx errors indicated, number of recover flows ended successfully, - is autorecover enabled and graceful period from last recover:: - - $ devlink health show pci/0000:82:00.0 reporter tx - -rx reporter ------------ -The rx reporter is responsible for reporting and recovering of the following two error scenarios: - -- rx queues' initialization (population) timeout - Population of rx queues' descriptors on ring initialization is done - in napi context via triggering an irq. In case of a failure to get - the minimum amount of descriptors, a timeout would occur, and - descriptors could be recovered by polling the EQ (Event Queue). -- rx completions with errors (reported by HW on interrupt context) - Report on rx completion error. - Recover (if needed) by flushing the related queue and reset it. - -rx reporter also supports on demand diagnose callback, on which it -provides real time information of its receive queues' status. - -- Diagnose rx queues' status and corresponding completion queue:: - - $ devlink health diagnose pci/0000:82:00.0 reporter rx - -NOTE: This command has valid output only when interface is up. Otherwise, the command has empty output. - -- Show number of rx errors indicated, number of recover flows ended successfully, - is autorecover enabled, and graceful period from last recover:: - - $ devlink health show pci/0000:82:00.0 reporter rx - -fw reporter ------------ -The fw reporter implements `diagnose` and `dump` callbacks. -It follows symptoms of fw error such as fw syndrome by triggering -fw core dump and storing it into the dump buffer. -The fw reporter diagnose command can be triggered any time by the user to check -current fw status. - -User commands examples: - -- Check fw heath status:: - - $ devlink health diagnose pci/0000:82:00.0 reporter fw - -- Read FW core dump if already stored or trigger new one:: - - $ devlink health dump show pci/0000:82:00.0 reporter fw - -.. note:: - This command can run only on the PF which has fw tracer ownership, - running it on other PF or any VF will return "Operation not permitted". - -fw fatal reporter ------------------ -The fw fatal reporter implements `dump` and `recover` callbacks. -It follows fatal errors indications by CR-space dump and recover flow. -The CR-space dump uses vsc interface which is valid even if the FW command -interface is not functional, which is the case in most FW fatal errors. -The recover function runs recover flow which reloads the driver and triggers fw -reset if needed. -On firmware error, the health buffer is dumped into the dmesg. The log -level is derived from the error's severity (given in health buffer). - -User commands examples: - -- Run fw recover flow manually:: - - $ devlink health recover pci/0000:82:00.0 reporter fw_fatal - -- Read FW CR-space dump if already stored or trigger new one:: - - $ devlink health dump show pci/0000:82:00.1 reporter fw_fatal - -.. note:: - This command can run only on PF. - -vnic reporter -------------- -The vnic reporter implements only the `diagnose` callback. -It is responsible for querying the vnic diagnostic counters from fw and displaying -them in realtime. - -Description of the vnic counters: - -- total_q_under_processor_handle - number of queues in an error state due to - an async error or errored command. -- send_queue_priority_update_flow - number of QP/SQ priority/SL update events. -- cq_overrun - number of times CQ entered an error state due to an overflow. -- async_eq_overrun - number of times an EQ mapped to async events was overrun. - comp_eq_overrun number of times an EQ mapped to completion events was - overrun. -- quota_exceeded_command - number of commands issued and failed due to quota exceeded. -- invalid_command - number of commands issued and failed dues to any reason other than quota - exceeded. -- nic_receive_steering_discard - number of packets that completed RX flow - steering but were discarded due to a mismatch in flow table. -- generated_pkt_steering_fail - number of packets generated by the VNIC experiencing unexpected steering - failure (at any point in steering flow). -- handled_pkt_steering_fail - number of packets handled by the VNIC experiencing unexpected steering - failure (at any point in steering flow owned by the VNIC, including the FDB - for the eswitch owner). - -User commands examples: - -- Diagnose PF/VF vnic counters:: - - $ devlink health diagnose pci/0000:82:00.1 reporter vnic - -- Diagnose representor vnic counters (performed by supplying devlink port of the - representor, which can be obtained via devlink port command):: - - $ devlink health diagnose pci/0000:82:00.1/65537 reporter vnic - -.. note:: - This command can run over all interfaces such as PF/VF and representor ports. diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/index.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/index.rst index 3fdcd6b61ccf..581a91caa579 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/index.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/index.rst @@ -13,7 +13,6 @@ Contents: :maxdepth: 2 kconfig - devlink switchdev tracepoints counters diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst index 43b1f7e87ec4..0a42c3395ffa 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst @@ -36,7 +36,7 @@ Enabling the driver and kconfig options **CONFIG_MLX5_CORE_EN_DCB=(y/n)**: -| Enables `Data Center Bridging (DCB) Support <https://community.mellanox.com/s/article/howto-auto-config-pfc-and-ets-on-connectx-4-via-lldp-dcbx>`_. +| Enables `Data Center Bridging (DCB) Support <https://enterprise-support.nvidia.com/s/article/howto-auto-config-pfc-and-ets-on-connectx-4-via-lldp-dcbx>`_. **CONFIG_MLX5_CORE_IPOIB=(y/n)** @@ -59,12 +59,12 @@ Enabling the driver and kconfig options **CONFIG_MLX5_EN_ARFS=(y/n)** | Enables Hardware-accelerated receive flow steering (arfs) support, and ntuple filtering. -| https://community.mellanox.com/s/article/howto-configure-arfs-on-connectx-4 +| https://enterprise-support.nvidia.com/s/article/howto-configure-arfs-on-connectx-4 **CONFIG_MLX5_EN_IPSEC=(y/n)** -| Enables `IPSec XFRM cryptography-offload acceleration <https://support.mellanox.com/s/article/ConnectX-6DX-Bluefield-2-IPsec-HW-Full-Offload-Configuration-Guide>`_. +| Enables :ref:`IPSec XFRM cryptography-offload acceleration <xfrm_device>`. **CONFIG_MLX5_EN_MACSEC=(y/n)** @@ -87,8 +87,8 @@ Enabling the driver and kconfig options | Ethernet SRIOV E-Switch support in ConnectX NIC. E-Switch provides internal SRIOV packet steering | and switching for the enabled VFs and PF in two available modes: -| 1) `Legacy SRIOV mode (L2 mac vlan steering based) <https://community.mellanox.com/s/article/howto-configure-sr-iov-for-connectx-4-connectx-5-with-kvm--ethernet-x>`_. -| 2) `Switchdev mode (eswitch offloads) <https://www.mellanox.com/related-docs/prod_software/ASAP2_Hardware_Offloading_for_vSwitches_User_Manual_v4.4.pdf>`_. +| 1) `Legacy SRIOV mode (L2 mac vlan steering based) <https://enterprise-support.nvidia.com/s/article/HowTo-Configure-SR-IOV-for-ConnectX-4-ConnectX-5-ConnectX-6-with-KVM-Ethernet>`_. +| 2) :ref:`Switchdev mode (eswitch offloads) <switchdev>`. **CONFIG_MLX5_FPGA=(y/n)** @@ -101,13 +101,13 @@ Enabling the driver and kconfig options **CONFIG_MLX5_INFINIBAND=(y/n/m)** (module mlx5_ib.ko) -| Provides low-level InfiniBand/RDMA and `RoCE <https://community.mellanox.com/s/article/recommended-network-configuration-examples-for-roce-deployment>`_ support. +| Provides low-level InfiniBand/RDMA and `RoCE <https://enterprise-support.nvidia.com/s/article/recommended-network-configuration-examples-for-roce-deployment>`_ support. **CONFIG_MLX5_MPFS=(y/n)** | Ethernet Multi-Physical Function Switch (MPFS) support in ConnectX NIC. -| MPFs is required for when `Multi-Host <http://www.mellanox.com/page/multihost>`_ configuration is enabled to allow passing +| MPFs is required for when `Multi-Host <https://www.nvidia.com/en-us/networking/multi-host/>`_ configuration is enabled to allow passing | user configured unicast MAC addresses to the requesting PF. diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst index 6e3f5ee8b0d0..b617e93d7c2c 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst @@ -190,6 +190,26 @@ explicitly enable the VF migratable capability. mlx5 driver support devlink port function attr mechanism to setup migratable capability. (refer to Documentation/networking/devlink/devlink-port.rst) +IPsec crypto capability setup +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +User who wants mlx5 PCI VFs to be able to perform IPsec crypto offloading need +to explicitly enable the VF ipsec_crypto capability. Enabling IPsec capability +for VFs is supported starting with ConnectX6dx devices and above. When a VF has +IPsec capability enabled, any IPsec offloading is blocked on the PF. + +mlx5 driver support devlink port function attr mechanism to setup ipsec_crypto +capability. (refer to Documentation/networking/devlink/devlink-port.rst) + +IPsec packet capability setup +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +User who wants mlx5 PCI VFs to be able to perform IPsec packet offloading need +to explicitly enable the VF ipsec_packet capability. Enabling IPsec capability +for VFs is supported starting with ConnectX6dx devices and above. When a VF has +IPsec capability enabled, any IPsec offloading is blocked on the PF. + +mlx5 driver support devlink port function attr mechanism to setup ipsec_packet +capability. (refer to Documentation/networking/devlink/devlink-port.rst) + SF state setup -------------- diff --git a/Documentation/networking/devlink/devlink-port.rst b/Documentation/networking/devlink/devlink-port.rst index e0c7b95f505b..e33ad2401ad7 100644 --- a/Documentation/networking/devlink/devlink-port.rst +++ b/Documentation/networking/devlink/devlink-port.rst @@ -128,6 +128,12 @@ Users may also set the RoCE capability of the function using Users may also set the function as migratable using 'devlink port function set migratable' command. +Users may also set the IPsec crypto capability of the function using +`devlink port function set ipsec_crypto` command. + +Users may also set the IPsec packet capability of the function using +`devlink port function set ipsec_packet` command. + Function attributes =================== @@ -240,6 +246,55 @@ Attach VF to the VM. Start the VM. Perform live migration. +IPsec crypto capability setup +----------------------------- +When user enables IPsec crypto capability for a VF, user application can offload +XFRM state crypto operation (Encrypt/Decrypt) to this VF. + +When IPsec crypto capability is disabled (default) for a VF, the XFRM state is +processed in software by the kernel. + +- Get IPsec crypto capability of the VF device:: + + $ devlink port show pci/0000:06:00.0/2 + pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 + function: + hw_addr 00:00:00:00:00:00 ipsec_crypto disabled + +- Set IPsec crypto capability of the VF device:: + + $ devlink port function set pci/0000:06:00.0/2 ipsec_crypto enable + + $ devlink port show pci/0000:06:00.0/2 + pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 + function: + hw_addr 00:00:00:00:00:00 ipsec_crypto enabled + +IPsec packet capability setup +----------------------------- +When user enables IPsec packet capability for a VF, user application can offload +XFRM state and policy crypto operation (Encrypt/Decrypt) to this VF, as well as +IPsec encapsulation. + +When IPsec packet capability is disabled (default) for a VF, the XFRM state and +policy is processed in software by the kernel. + +- Get IPsec packet capability of the VF device:: + + $ devlink port show pci/0000:06:00.0/2 + pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 + function: + hw_addr 00:00:00:00:00:00 ipsec_packet disabled + +- Set IPsec packet capability of the VF device:: + + $ devlink port function set pci/0000:06:00.0/2 ipsec_packet enable + + $ devlink port show pci/0000:06:00.0/2 + pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 + function: + hw_addr 00:00:00:00:00:00 ipsec_packet enabled + Subfunction ============ diff --git a/Documentation/networking/devlink/mlx5.rst b/Documentation/networking/devlink/mlx5.rst index 202798d6501e..702f204a3dbd 100644 --- a/Documentation/networking/devlink/mlx5.rst +++ b/Documentation/networking/devlink/mlx5.rst @@ -18,6 +18,11 @@ Parameters * - ``enable_roce`` - driverinit - Type: Boolean + + If the device supports RoCE disablement, RoCE enablement state controls + device support for RoCE capability. Otherwise, the control occurs in the + driver stack. When RoCE is disabled at the driver level, only raw + ethernet QPs are supported. * - ``io_eq_size`` - driverinit - The range is between 64 and 4096. @@ -48,6 +53,9 @@ parameters. * ``smfs`` Software managed flow steering. In SMFS mode, the HW steering entities are created and manage through the driver without firmware intervention. + + SMFS mode is faster and provides better rule insertion rate compared to + default DMFS mode. * - ``fdb_large_groups`` - u32 - driverinit @@ -71,7 +79,24 @@ parameters. deprecated. Default: disabled + * - ``esw_port_metadata`` + - Boolean + - runtime + - When applicable, disabling eswitch metadata can increase packet rate up + to 20% depending on the use case and packet sizes. + + Eswitch port metadata state controls whether to internally tag packets + with metadata. Metadata tagging must be enabled for multi-port RoCE, + failover between representors and stacked devices. By default metadata is + enabled on the supported devices in E-switch. Metadata is applicable only + for E-switch in switchdev mode and users may disable it when NONE of the + below use cases will be in use: + 1. HCA is in Dual/multi-port RoCE mode. + 2. VF/SF representor bonding (Usually used for Live migration) + 3. Stacked devices + When metadata is disabled, the above use cases will fail to initialize if + users try to enable them. * - ``hairpin_num_queues`` - u32 - driverinit @@ -104,3 +129,160 @@ The ``mlx5`` driver reports the following versions * - ``fw.version`` - stored, running - Three digit major.minor.subminor firmware version number. + +Health reporters +================ + +tx reporter +----------- +The tx reporter is responsible for reporting and recovering of the following three error scenarios: + +- tx timeout + Report on kernel tx timeout detection. + Recover by searching lost interrupts. +- tx error completion + Report on error tx completion. + Recover by flushing the tx queue and reset it. +- tx PTP port timestamping CQ unhealthy + Report too many CQEs never delivered on port ts CQ. + Recover by flushing and re-creating all PTP channels. + +tx reporter also support on demand diagnose callback, on which it provides +real time information of its send queues status. + +User commands examples: + +- Diagnose send queues status:: + + $ devlink health diagnose pci/0000:82:00.0 reporter tx + +.. note:: + This command has valid output only when interface is up, otherwise the command has empty output. + +- Show number of tx errors indicated, number of recover flows ended successfully, + is autorecover enabled and graceful period from last recover:: + + $ devlink health show pci/0000:82:00.0 reporter tx + +rx reporter +----------- +The rx reporter is responsible for reporting and recovering of the following two error scenarios: + +- rx queues' initialization (population) timeout + Population of rx queues' descriptors on ring initialization is done + in napi context via triggering an irq. In case of a failure to get + the minimum amount of descriptors, a timeout would occur, and + descriptors could be recovered by polling the EQ (Event Queue). +- rx completions with errors (reported by HW on interrupt context) + Report on rx completion error. + Recover (if needed) by flushing the related queue and reset it. + +rx reporter also supports on demand diagnose callback, on which it +provides real time information of its receive queues' status. + +- Diagnose rx queues' status and corresponding completion queue:: + + $ devlink health diagnose pci/0000:82:00.0 reporter rx + +.. note:: + This command has valid output only when interface is up. Otherwise, the command has empty output. + +- Show number of rx errors indicated, number of recover flows ended successfully, + is autorecover enabled, and graceful period from last recover:: + + $ devlink health show pci/0000:82:00.0 reporter rx + +fw reporter +----------- +The fw reporter implements `diagnose` and `dump` callbacks. +It follows symptoms of fw error such as fw syndrome by triggering +fw core dump and storing it into the dump buffer. +The fw reporter diagnose command can be triggered any time by the user to check +current fw status. + +User commands examples: + +- Check fw heath status:: + + $ devlink health diagnose pci/0000:82:00.0 reporter fw + +- Read FW core dump if already stored or trigger new one:: + + $ devlink health dump show pci/0000:82:00.0 reporter fw + +.. note:: + This command can run only on the PF which has fw tracer ownership, + running it on other PF or any VF will return "Operation not permitted". + +fw fatal reporter +----------------- +The fw fatal reporter implements `dump` and `recover` callbacks. +It follows fatal errors indications by CR-space dump and recover flow. +The CR-space dump uses vsc interface which is valid even if the FW command +interface is not functional, which is the case in most FW fatal errors. +The recover function runs recover flow which reloads the driver and triggers fw +reset if needed. +On firmware error, the health buffer is dumped into the dmesg. The log +level is derived from the error's severity (given in health buffer). + +User commands examples: + +- Run fw recover flow manually:: + + $ devlink health recover pci/0000:82:00.0 reporter fw_fatal + +- Read FW CR-space dump if already stored or trigger new one:: + + $ devlink health dump show pci/0000:82:00.1 reporter fw_fatal + +.. note:: + This command can run only on PF. + +vnic reporter +------------- +The vnic reporter implements only the `diagnose` callback. +It is responsible for querying the vnic diagnostic counters from fw and displaying +them in realtime. + +Description of the vnic counters: + +- total_q_under_processor_handle + number of queues in an error state due to + an async error or errored command. +- send_queue_priority_update_flow + number of QP/SQ priority/SL update events. +- cq_overrun + number of times CQ entered an error state due to an overflow. +- async_eq_overrun + number of times an EQ mapped to async events was overrun. + comp_eq_overrun number of times an EQ mapped to completion events was + overrun. +- quota_exceeded_command + number of commands issued and failed due to quota exceeded. +- invalid_command + number of commands issued and failed dues to any reason other than quota + exceeded. +- nic_receive_steering_discard + number of packets that completed RX flow + steering but were discarded due to a mismatch in flow table. +- generated_pkt_steering_fail + number of packets generated by the VNIC experiencing unexpected steering + failure (at any point in steering flow). +- handled_pkt_steering_fail + number of packets handled by the VNIC experiencing unexpected steering + failure (at any point in steering flow owned by the VNIC, including the FDB + for the eswitch owner). + +User commands examples: + +- Diagnose PF/VF vnic counters:: + + $ devlink health diagnose pci/0000:82:00.1 reporter vnic + +- Diagnose representor vnic counters (performed by supplying devlink port of the + representor, which can be obtained via devlink port command):: + + $ devlink health diagnose pci/0000:82:00.1/65537 reporter vnic + +.. note:: + This command can run over all interfaces such as PF/VF and representor ports. diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 4a010a7cde7f..a66054d0763a 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -321,6 +321,7 @@ tcp_abort_on_overflow - BOOLEAN option can harm clients of your server. tcp_adv_win_scale - INTEGER + Obsolete since linux-6.6 Count buffering overhead as bytes/2^tcp_adv_win_scale (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. @@ -2287,6 +2288,14 @@ accept_ra_min_hop_limit - INTEGER Default: 1 +accept_ra_min_lft - INTEGER + Minimum acceptable lifetime value in Router Advertisement. + + RA sections with a lifetime less than this value shall be + ignored. Zero lifetimes stay unaffected. + + Default: 0 + accept_ra_pinfo - BOOLEAN Learn Prefix Information in Router Advertisement. diff --git a/Documentation/networking/mptcp-sysctl.rst b/Documentation/networking/mptcp-sysctl.rst index 213510698014..15f1919d640c 100644 --- a/Documentation/networking/mptcp-sysctl.rst +++ b/Documentation/networking/mptcp-sysctl.rst @@ -74,3 +74,11 @@ stale_loss_cnt - INTEGER This is a per-namespace sysctl. Default: 4 + +scheduler - STRING + Select the scheduler of your choice. + + Support for selection of different schedulers. This is a per-namespace + sysctl. + + Default: "default" diff --git a/Documentation/networking/napi.rst b/Documentation/networking/napi.rst index a7a047742e93..7bf7b95c4f7a 100644 --- a/Documentation/networking/napi.rst +++ b/Documentation/networking/napi.rst @@ -65,15 +65,16 @@ argument - drivers can process completions for any number of Tx packets but should only process up to ``budget`` number of Rx packets. Rx processing is usually much more expensive. -In other words, it is recommended to ignore the budget argument when -performing TX buffer reclamation to ensure that the reclamation is not -arbitrarily bounded; however, it is required to honor the budget argument -for RX processing. +In other words for Rx processing the ``budget`` argument limits how many +packets driver can process in a single poll. Rx specific APIs like page +pool or XDP cannot be used at all when ``budget`` is 0. +skb Tx processing should happen regardless of the ``budget``, but if +the argument is 0 driver cannot call any XDP (or page pool) APIs. .. warning:: - The ``budget`` argument may be 0 if core tries to only process Tx completions - and no Rx packets. + The ``budget`` argument may be 0 if core tries to only process + skb Tx completions and no Rx or XDP packets. The poll method returns the amount of work done. If the driver still has outstanding work to do (e.g. ``budget`` was exhausted) diff --git a/Documentation/networking/netconsole.rst b/Documentation/networking/netconsole.rst index dd0518e002f6..7a9de0568e84 100644 --- a/Documentation/networking/netconsole.rst +++ b/Documentation/networking/netconsole.rst @@ -13,6 +13,8 @@ IPv6 support by Cong Wang <xiyou.wangcong@gmail.com>, Jan 1 2013 Extended console support by Tejun Heo <tj@kernel.org>, May 1 2015 +Release prepend support by Breno Leitao <leitao@debian.org>, Jul 7 2023 + Please send bug reports to Matt Mackall <mpm@selenic.com> Satyam Sharma <satyam.sharma@gmail.com>, and Cong Wang <xiyou.wangcong@gmail.com> @@ -34,10 +36,11 @@ Sender and receiver configuration: It takes a string configuration parameter "netconsole" in the following format:: - netconsole=[+][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr] + netconsole=[+][r][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr] where + if present, enable extended console support + r if present, prepend kernel version (release) to the message src-port source for UDP packets (defaults to 6665) src-ip source IP to use (interface address) dev network interface (eth0) @@ -125,6 +128,7 @@ The interface exposes these parameters of a netconsole target to userspace: ============== ================================= ============ enabled Is this target currently enabled? (read-write) extended Extended mode enabled (read-write) + release Prepend kernel release to message (read-write) dev_name Local network interface name (read-write) local_port Source UDP port to use (read-write) remote_port Remote agent's UDP port (read-write) @@ -165,6 +169,11 @@ following format which is the same as /dev/kmsg:: <level>,<sequnum>,<timestamp>,<contflag>;<message text> +If 'r' (release) feature is enabled, the kernel release version is +prepended to the start of the message. Example:: + + 6.4.0,6,444,501151268,-;netconsole: network logging started + Non printable characters in <message text> are escaped using "\xff" notation. If the message contains optional dictionary, verbatim newline is used as the delimiter. diff --git a/Documentation/networking/nf_conntrack-sysctl.rst b/Documentation/networking/nf_conntrack-sysctl.rst index 8b1045c3b59e..c383a394c665 100644 --- a/Documentation/networking/nf_conntrack-sysctl.rst +++ b/Documentation/networking/nf_conntrack-sysctl.rst @@ -178,10 +178,10 @@ nf_conntrack_sctp_timeout_established - INTEGER (seconds) Default is set to (hb_interval * path_max_retrans + rto_max) nf_conntrack_sctp_timeout_shutdown_sent - INTEGER (seconds) - default 0.3 + default 3 nf_conntrack_sctp_timeout_shutdown_recd - INTEGER (seconds) - default 0.3 + default 3 nf_conntrack_sctp_timeout_shutdown_ack_sent - INTEGER (seconds) default 3 diff --git a/Documentation/networking/page_pool.rst b/Documentation/networking/page_pool.rst index 873efd97f822..215ebc92752c 100644 --- a/Documentation/networking/page_pool.rst +++ b/Documentation/networking/page_pool.rst @@ -4,22 +4,8 @@ Page Pool API ============= -The page_pool allocator is optimized for the XDP mode that uses one frame -per-page, but it can fallback on the regular page allocator APIs. - -Basic use involves replacing alloc_pages() calls with the -page_pool_alloc_pages() call. Drivers should use page_pool_dev_alloc_pages() -replacing dev_alloc_pages(). - -API keeps track of in-flight pages, in order to let API user know -when it is safe to free a page_pool object. Thus, API users -must run page_pool_release_page() when a page is leaving the page_pool or -call page_pool_put_page() where appropriate in order to maintain correct -accounting. - -API user must call page_pool_put_page() once on a page, as it -will either recycle the page, or in case of refcnt > 1, it will -release the DMA mapping and in-flight state accounting. +.. kernel-doc:: include/net/page_pool/helpers.h + :doc: page_pool allocator Architecture overview ===================== @@ -64,87 +50,68 @@ This lockless guarantee naturally comes from running under a NAPI softirq. The protection doesn't strictly have to be NAPI, any guarantee that allocating a page will cause no race conditions is enough. -* page_pool_create(): Create a pool. - * flags: PP_FLAG_DMA_MAP, PP_FLAG_DMA_SYNC_DEV - * order: 2^order pages on allocation - * pool_size: size of the ptr_ring - * nid: preferred NUMA node for allocation - * dev: struct device. Used on DMA operations - * dma_dir: DMA direction - * max_len: max DMA sync memory size - * offset: DMA address offset - -* page_pool_put_page(): The outcome of this depends on the page refcnt. If the - driver bumps the refcnt > 1 this will unmap the page. If the page refcnt is 1 - the allocator owns the page and will try to recycle it in one of the pool - caches. If PP_FLAG_DMA_SYNC_DEV is set, the page will be synced for_device - using dma_sync_single_range_for_device(). - -* page_pool_put_full_page(): Similar to page_pool_put_page(), but will DMA sync - for the entire memory area configured in area pool->max_len. - -* page_pool_recycle_direct(): Similar to page_pool_put_full_page() but caller - must guarantee safe context (e.g NAPI), since it will recycle the page - directly into the pool fast cache. - -* page_pool_release_page(): Unmap the page (if mapped) and account for it on - in-flight counters. - -* page_pool_dev_alloc_pages(): Get a page from the page allocator or page_pool - caches. - -* page_pool_get_dma_addr(): Retrieve the stored DMA address. - -* page_pool_get_dma_dir(): Retrieve the stored DMA direction. - -* page_pool_put_page_bulk(): Tries to refill a number of pages into the - ptr_ring cache holding ptr_ring producer lock. If the ptr_ring is full, - page_pool_put_page_bulk() will release leftover pages to the page allocator. - page_pool_put_page_bulk() is suitable to be run inside the driver NAPI tx - completion loop for the XDP_REDIRECT use case. - Please note the caller must not use data area after running - page_pool_put_page_bulk(), as this function overwrites it. - -* page_pool_get_stats(): Retrieve statistics about the page_pool. This API - is only available if the kernel has been configured with - ``CONFIG_PAGE_POOL_STATS=y``. A pointer to a caller allocated ``struct - page_pool_stats`` structure is passed to this API which is filled in. The - caller can then report those stats to the user (perhaps via ethtool, - debugfs, etc.). See below for an example usage of this API. +.. kernel-doc:: net/core/page_pool.c + :identifiers: page_pool_create + +.. kernel-doc:: include/net/page_pool/types.h + :identifiers: struct page_pool_params + +.. kernel-doc:: include/net/page_pool/helpers.h + :identifiers: page_pool_put_page page_pool_put_full_page + page_pool_recycle_direct page_pool_dev_alloc_pages + page_pool_get_dma_addr page_pool_get_dma_dir + +.. kernel-doc:: net/core/page_pool.c + :identifiers: page_pool_put_page_bulk page_pool_get_stats + +DMA sync +-------- +Driver is always responsible for syncing the pages for the CPU. +Drivers may choose to take care of syncing for the device as well +or set the ``PP_FLAG_DMA_SYNC_DEV`` flag to request that pages +allocated from the page pool are already synced for the device. + +If ``PP_FLAG_DMA_SYNC_DEV`` is set, the driver must inform the core what portion +of the buffer has to be synced. This allows the core to avoid syncing the entire +page when the drivers knows that the device only accessed a portion of the page. + +Most drivers will reserve headroom in front of the frame. This part +of the buffer is not touched by the device, so to avoid syncing +it drivers can set the ``offset`` field in struct page_pool_params +appropriately. + +For pages recycled on the XDP xmit and skb paths the page pool will +use the ``max_len`` member of struct page_pool_params to decide how +much of the page needs to be synced (starting at ``offset``). +When directly freeing pages in the driver (page_pool_put_page()) +the ``dma_sync_size`` argument specifies how much of the buffer needs +to be synced. + +If in doubt set ``offset`` to 0, ``max_len`` to ``PAGE_SIZE`` and +pass -1 as ``dma_sync_size``. That combination of arguments is always +correct. + +Note that the syncing parameters are for the entire page. +This is important to remember when using fragments (``PP_FLAG_PAGE_FRAG``), +where allocated buffers may be smaller than a full page. +Unless the driver author really understands page pool internals +it's recommended to always use ``offset = 0``, ``max_len = PAGE_SIZE`` +with fragmented page pools. Stats API and structures ------------------------ If the kernel is configured with ``CONFIG_PAGE_POOL_STATS=y``, the API -``page_pool_get_stats()`` and structures described below are available. It -takes a pointer to a ``struct page_pool`` and a pointer to a ``struct -page_pool_stats`` allocated by the caller. +page_pool_get_stats() and structures described below are available. +It takes a pointer to a ``struct page_pool`` and a pointer to a struct +page_pool_stats allocated by the caller. -The API will fill in the provided ``struct page_pool_stats`` with +The API will fill in the provided struct page_pool_stats with statistics about the page_pool. -The stats structure has the following fields:: - - struct page_pool_stats { - struct page_pool_alloc_stats alloc_stats; - struct page_pool_recycle_stats recycle_stats; - }; - - -The ``struct page_pool_alloc_stats`` has the following fields: - * ``fast``: successful fast path allocations - * ``slow``: slow path order-0 allocations - * ``slow_high_order``: slow path high order allocations - * ``empty``: ptr ring is empty, so a slow path allocation was forced. - * ``refill``: an allocation which triggered a refill of the cache - * ``waive``: pages obtained from the ptr ring that cannot be added to - the cache due to a NUMA mismatch. - -The ``struct page_pool_recycle_stats`` has the following fields: - * ``cached``: recycling placed page in the page pool cache - * ``cache_full``: page pool cache was full - * ``ring``: page placed into the ptr ring - * ``ring_full``: page released from page pool because the ptr ring was full - * ``released_refcnt``: page released (and not recycled) because refcnt > 1 +.. kernel-doc:: include/net/page_pool/types.h + :identifiers: struct page_pool_recycle_stats + struct page_pool_alloc_stats + struct page_pool_stats Coding examples =============== @@ -194,7 +161,7 @@ NAPI poller if XDP_DROP: page_pool_recycle_direct(page_pool, page); } else (packet_is_skb) { - page_pool_release_page(page_pool, page); + skb_mark_for_recycle(skb); new_page = page_pool_dev_alloc_pages(page_pool); } } diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index b7ac4c64cf67..1283240d7620 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -323,6 +323,10 @@ Some of the interface modes are described below: contrast with the 1000BASE-X phy mode used for Clause 38 and 39 PMDs, this interface mode has different autonegotiation and only supports full duplex. +``PHY_INTERFACE_MODE_PSGMII`` + This is the Penta SGMII mode, it is similar to QSGMII but it combines 5 + SGMII lines into a single link compared to 4 on QSGMII. + Pause frames / flow control =========================== diff --git a/Documentation/networking/xfrm_device.rst b/Documentation/networking/xfrm_device.rst index 83abdfef4ec3..535077cbeb07 100644 --- a/Documentation/networking/xfrm_device.rst +++ b/Documentation/networking/xfrm_device.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 +.. _xfrm_device: =============================================== XFRM device - offloading the IPsec computations diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst index d33b554ca7ba..a50834798454 100644 --- a/Documentation/powerpc/index.rst +++ b/Documentation/powerpc/index.rst @@ -36,6 +36,7 @@ powerpc ultravisor vas-api vcpudispatch_stats + vmemmap_dedup features diff --git a/Documentation/powerpc/vmemmap_dedup.rst b/Documentation/powerpc/vmemmap_dedup.rst new file mode 100644 index 000000000000..dc4db59fdf87 --- /dev/null +++ b/Documentation/powerpc/vmemmap_dedup.rst @@ -0,0 +1,101 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========== +Device DAX +========== + +The device-dax interface uses the tail deduplication technique explained in +Documentation/mm/vmemmap_dedup.rst + +On powerpc, vmemmap deduplication is only used with radix MMU translation. Also +with a 64K page size, only the devdax namespace with 1G alignment uses vmemmap +deduplication. + +With 2M PMD level mapping, we require 32 struct pages and a single 64K vmemmap +page can contain 1024 struct pages (64K/sizeof(struct page)). Hence there is no +vmemmap deduplication possible. + +With 1G PUD level mapping, we require 16384 struct pages and a single 64K +vmemmap page can contain 1024 struct pages (64K/sizeof(struct page)). Hence we +require 16 64K pages in vmemmap to map the struct page for 1G PUD level mapping. + +Here's how things look like on device-dax after the sections are populated:: + +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ + | | | 0 | -------------> | 0 | + | | +-----------+ +-----------+ + | | | 1 | -------------> | 1 | + | | +-----------+ +-----------+ + | | | 2 | ----------------^ ^ ^ ^ ^ ^ + | | +-----------+ | | | | | + | | | 3 | ------------------+ | | | | + | | +-----------+ | | | | + | | | 4 | --------------------+ | | | + | PUD | +-----------+ | | | + | level | | . | ----------------------+ | | + | mapping | +-----------+ | | + | | | . | ------------------------+ | + | | +-----------+ | + | | | 15 | --------------------------+ + | | +-----------+ + | | + | | + | | + +-----------+ + + +With 4K page size, 2M PMD level mapping requires 512 struct pages and a single +4K vmemmap page contains 64 struct pages(4K/sizeof(struct page)). Hence we +require 8 4K pages in vmemmap to map the struct page for 2M pmd level mapping. + +Here's how things look like on device-dax after the sections are populated:: + + +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ + | | | 0 | -------------> | 0 | + | | +-----------+ +-----------+ + | | | 1 | -------------> | 1 | + | | +-----------+ +-----------+ + | | | 2 | ----------------^ ^ ^ ^ ^ ^ + | | +-----------+ | | | | | + | | | 3 | ------------------+ | | | | + | | +-----------+ | | | | + | | | 4 | --------------------+ | | | + | PMD | +-----------+ | | | + | level | | 5 | ----------------------+ | | + | mapping | +-----------+ | | + | | | 6 | ------------------------+ | + | | +-----------+ | + | | | 7 | --------------------------+ + | | +-----------+ + | | + | | + | | + +-----------+ + +With 1G PUD level mapping, we require 262144 struct pages and a single 4K +vmemmap page can contain 64 struct pages (4K/sizeof(struct page)). Hence we +require 4096 4K pages in vmemmap to map the struct pages for 1G PUD level +mapping. + +Here's how things look like on device-dax after the sections are populated:: + + +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ + | | | 0 | -------------> | 0 | + | | +-----------+ +-----------+ + | | | 1 | -------------> | 1 | + | | +-----------+ +-----------+ + | | | 2 | ----------------^ ^ ^ ^ ^ ^ + | | +-----------+ | | | | | + | | | 3 | ------------------+ | | | | + | | +-----------+ | | | | + | | | 4 | --------------------+ | | | + | PUD | +-----------+ | | | + | level | | . | ----------------------+ | | + | mapping | +-----------+ | | + | | | . | ------------------------+ | + | | +-----------+ | + | | | 4095 | --------------------------+ + | | +-----------+ + | | + | | + | | + +-----------+ diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index 1982fa896f3b..b48da698d6f2 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -31,8 +31,8 @@ you probably needn't concern yourself with pcmciautils. ====================== =============== ======================================== GNU C 5.1 gcc --version Clang/LLVM (optional) 11.0.0 clang --version -Rust (optional) 1.68.2 rustc --version -bindgen (optional) 0.56.0 bindgen --version +Rust (optional) 1.71.1 rustc --version +bindgen (optional) 0.65.1 bindgen --version GNU make 3.82 make --version bash 4.2 bash --version binutils 2.25 ld -v diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst index df978127f2d7..cb686238f21d 100644 --- a/Documentation/process/embargoed-hardware-issues.rst +++ b/Documentation/process/embargoed-hardware-issues.rst @@ -254,7 +254,6 @@ an involved disclosed party. The current ambassadors list: Samsung Javier González <javier.gonz@samsung.com> Microsoft James Morris <jamorris@linux.microsoft.com> - VMware Xen Andrew Cooper <andrew.cooper3@citrix.com> Canonical John Johansen <john.johansen@canonical.com> @@ -263,10 +262,8 @@ an involved disclosed party. The current ambassadors list: Red Hat Josh Poimboeuf <jpoimboe@redhat.com> SUSE Jiri Kosina <jkosina@suse.cz> - Amazon Google Kees Cook <keescook@chromium.org> - GCC LLVM Nick Desaulniers <ndesaulniers@google.com> ============= ======================================================== diff --git a/Documentation/process/maintainer-handbooks.rst b/Documentation/process/maintainer-handbooks.rst index 9992bfd7eaa3..976391cec528 100644 --- a/Documentation/process/maintainer-handbooks.rst +++ b/Documentation/process/maintainer-handbooks.rst @@ -17,5 +17,6 @@ Contents: maintainer-netdev maintainer-soc + maintainer-soc-clean-dts maintainer-tip maintainer-kvm-x86 diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index 2397b31c0198..c1c732e9748b 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -98,7 +98,7 @@ If you aren't subscribed to netdev and/or are simply unsure if repository link above for any new networking-related commits. You may also check the following website for the current status: - http://vger.kernel.org/~davem/net-next.html + https://patchwork.hopto.org/net-next.html The ``net`` tree continues to collect fixes for the vX.Y content, and is fed back to Linus at regular (~weekly) intervals. Meaning that the @@ -167,6 +167,8 @@ Asking the maintainer for status updates on your patch is a good way to ensure your patch is ignored or pushed to the bottom of the priority list. +.. _Changes requested: + Changes requested ~~~~~~~~~~~~~~~~~ @@ -359,6 +361,10 @@ Make sure you address all the feedback in your new posting. Do not post a new version of the code if the discussion about the previous version is still ongoing, unless directly instructed by a reviewer. +The new version of patches should be posted as a separate thread, +not as a reply to the previous posting. Change log should include a link +to the previous posting (see :ref:`Changes requested`). + Testing ------- diff --git a/Documentation/process/maintainer-soc-clean-dts.rst b/Documentation/process/maintainer-soc-clean-dts.rst new file mode 100644 index 000000000000..1b32430d0cfc --- /dev/null +++ b/Documentation/process/maintainer-soc-clean-dts.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================== +SoC Platforms with DTS Compliance Requirements +============================================== + +Overview +-------- + +SoC platforms or subarchitectures should follow all the rules from +Documentation/process/maintainer-soc.rst. This document referenced in +MAINTAINERS impose additional requirements listed below. + +Strict DTS DT Schema and dtc Compliance +--------------------------------------- + +No changes to the SoC platform Devicetree sources (DTS files) should introduce +new ``make dtbs_check W=1`` warnings. Warnings in a new board DTS, which are +results of issues in an included DTSI file, are considered existing, not new +warnings. The platform maintainers have automation in place which should point +out any new warnings. + +If a commit introducing new warnings gets accepted somehow, the resulting +issues shall be fixed in reasonable time (e.g. within one release) or the +commit reverted. diff --git a/Documentation/process/maintainer-soc.rst b/Documentation/process/maintainer-soc.rst index 49f08289d62c..12637530d68f 100644 --- a/Documentation/process/maintainer-soc.rst +++ b/Documentation/process/maintainer-soc.rst @@ -133,8 +133,8 @@ with the dt-bindings that describe the ABI. Please read the section more information on the validation of devicetrees. For new platforms, or additions to existing ones, ``make dtbs_check`` should not -add any new warnings. For RISC-V, as it has the advantage of being a newer -architecture, ``make dtbs_check W=1`` is required to not add any new warnings. +add any new warnings. For RISC-V and Samsung SoC, ``make dtbs_check W=1`` is +required to not add any new warnings. If in any doubt about a devicetree change, reach out to the devicetree maintainers. diff --git a/Documentation/process/security-bugs.rst b/Documentation/process/security-bugs.rst index 82e29837d589..5a6993795bd2 100644 --- a/Documentation/process/security-bugs.rst +++ b/Documentation/process/security-bugs.rst @@ -63,31 +63,28 @@ information submitted to the security list and any followup discussions of the report are treated confidentially even after the embargo has been lifted, in perpetuity. -Coordination ------------- - -Fixes for sensitive bugs, such as those that might lead to privilege -escalations, may need to be coordinated with the private -<linux-distros@vs.openwall.org> mailing list so that distribution vendors -are well prepared to issue a fixed kernel upon public disclosure of the -upstream fix. Distros will need some time to test the proposed patch and -will generally request at least a few days of embargo, and vendor update -publication prefers to happen Tuesday through Thursday. When appropriate, -the security team can assist with this coordination, or the reporter can -include linux-distros from the start. In this case, remember to prefix -the email Subject line with "[vs]" as described in the linux-distros wiki: -<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists> +Coordination with other groups +------------------------------ + +The kernel security team strongly recommends that reporters of potential +security issues NEVER contact the "linux-distros" mailing list until +AFTER discussing it with the kernel security team. Do not Cc: both +lists at once. You may contact the linux-distros mailing list after a +fix has been agreed on and you fully understand the requirements that +doing so will impose on you and the kernel community. + +The different lists have different goals and the linux-distros rules do +not contribute to actually fixing any potential security problems. CVE assignment -------------- -The security team does not normally assign CVEs, nor do we require them -for reports or fixes, as this can needlessly complicate the process and -may delay the bug handling. If a reporter wishes to have a CVE identifier -assigned ahead of public disclosure, they will need to contact the private -linux-distros list, described above. When such a CVE identifier is known -before a patch is provided, it is desirable to mention it in the commit -message if the reporter agrees. +The security team does not assign CVEs, nor do we require them for +reports or fixes, as this can needlessly complicate the process and may +delay the bug handling. If a reporter wishes to have a CVE identifier +assigned, they should find one by themselves, for example by contacting +MITRE directly. However under no circumstances will a patch inclusion +be delayed to wait for a CVE identifier to arrive. Non-disclosure agreements ------------------------- diff --git a/Documentation/riscv/hwprobe.rst b/Documentation/riscv/hwprobe.rst index 67111304ae5f..20eff9650da9 100644 --- a/Documentation/riscv/hwprobe.rst +++ b/Documentation/riscv/hwprobe.rst @@ -49,7 +49,7 @@ The following keys are defined: privileged ISA, with the following known exceptions (more exceptions may be added, but only if it can be demonstrated that the user ABI is not broken): - * The :fence.i: instruction cannot be directly executed by userspace + * The ``fence.i`` instruction cannot be directly executed by userspace programs (it may still be executed in userspace via a kernel-controlled mechanism such as the vDSO). diff --git a/Documentation/rust/quick-start.rst b/Documentation/rust/quick-start.rst index a8931512ed98..f382914f4191 100644 --- a/Documentation/rust/quick-start.rst +++ b/Documentation/rust/quick-start.rst @@ -38,7 +38,9 @@ and run:: rustup override set $(scripts/min-tool-version.sh rustc) -Otherwise, fetch a standalone installer from: +This will configure your working directory to use the correct version of +``rustc`` without affecting your default toolchain. If you are not using +``rustup``, fetch a standalone installer from: https://forge.rust-lang.org/infra/other-installation-methods.html#standalone @@ -56,16 +58,17 @@ If ``rustup`` is being used, run:: The components are installed per toolchain, thus upgrading the Rust compiler version later on requires re-adding the component. -Otherwise, if a standalone installer is used, the Rust repository may be cloned -into the installation folder of the toolchain:: +Otherwise, if a standalone installer is used, the Rust source tree may be +downloaded into the toolchain's installation folder:: - git clone --recurse-submodules \ - --branch $(scripts/min-tool-version.sh rustc) \ - https://github.com/rust-lang/rust \ - $(rustc --print sysroot)/lib/rustlib/src/rust + curl -L "https://static.rust-lang.org/dist/rust-src-$(scripts/min-tool-version.sh rustc).tar.gz" | + tar -xzf - -C "$(rustc --print sysroot)/lib" \ + "rust-src-$(scripts/min-tool-version.sh rustc)/rust-src/lib/" \ + --strip-components=3 In this case, upgrading the Rust compiler version later on requires manually -updating this clone. +updating the source tree (this can be done by removing ``$(rustc --print +sysroot)/lib/rustlib/src/rust`` then rerunning the above command). libclang @@ -98,7 +101,24 @@ the ``bindgen`` tool. A particular version is required. Install it via (note that this will download and build the tool from source):: - cargo install --locked --version $(scripts/min-tool-version.sh bindgen) bindgen + cargo install --locked --version $(scripts/min-tool-version.sh bindgen) bindgen-cli + +``bindgen`` needs to find a suitable ``libclang`` in order to work. If it is +not found (or a different ``libclang`` than the one found should be used), +the process can be tweaked using the environment variables understood by +``clang-sys`` (the Rust bindings crate that ``bindgen`` uses to access +``libclang``): + +* ``LLVM_CONFIG_PATH`` can be pointed to an ``llvm-config`` executable. + +* Or ``LIBCLANG_PATH`` can be pointed to a ``libclang`` shared library + or to the directory containing it. + +* Or ``CLANG_PATH`` can be pointed to a ``clang`` executable. + +For details, please see ``clang-sys``'s documentation at: + + https://github.com/KyleMayes/clang-sys#environment-variables Requirements: Developing @@ -179,7 +199,9 @@ be used with many editors to enable syntax highlighting, completion, go to definition, and other features. ``rust-analyzer`` needs a configuration file, ``rust-project.json``, which -can be generated by the ``rust-analyzer`` Make target. +can be generated by the ``rust-analyzer`` Make target:: + + make LLVM=1 rust-analyzer Configuration diff --git a/Documentation/scheduler/sched-design-CFS.rst b/Documentation/scheduler/sched-design-CFS.rst index 03db55504515..f68919800f05 100644 --- a/Documentation/scheduler/sched-design-CFS.rst +++ b/Documentation/scheduler/sched-design-CFS.rst @@ -94,7 +94,7 @@ other HZ detail. Thus the CFS scheduler has no notion of "timeslices" in the way the previous scheduler had, and has no heuristics whatsoever. There is only one central tunable (you have to switch on CONFIG_SCHED_DEBUG): - /sys/kernel/debug/sched/min_granularity_ns + /sys/kernel/debug/sched/base_slice_ns which can be used to tune the scheduler from "desktop" (i.e., low latencies) to "server" (i.e., good batching) workloads. It defaults to a setting suitable diff --git a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst index ea66b50a2b03..7ebaacb6df3d 100644 --- a/Documentation/sound/cards/audigy-mixer.rst +++ b/Documentation/sound/cards/audigy-mixer.rst @@ -46,157 +46,158 @@ FX-bus name='PCM Front Playback Volume',index=0 ---------------------------------------- -This control is used to attenuate samples for left and right front PCM FX-bus +This control is used to attenuate samples from left and right front PCM FX-bus accumulators. ALSA uses accumulators 8 and 9 for left and right front PCM -samples for 5.1 playback. The result samples are forwarded to the front DAC PCM -slots of the Philips DAC. +samples for 5.1 playback. The result samples are forwarded to the front speakers. name='PCM Surround Playback Volume',index=0 ------------------------------------------- -This control is used to attenuate samples for left and right surround PCM FX-bus +This control is used to attenuate samples from left and right surround PCM FX-bus accumulators. ALSA uses accumulators 2 and 3 for left and right surround PCM -samples for 5.1 playback. The result samples are forwarded to the surround DAC PCM -slots of the Philips DAC. +samples for 5.1 playback. The result samples are forwarded to the surround (rear) +speakers. + +name='PCM Side Playback Volume',index=0 +--------------------------------------- +This control is used to attenuate samples from left and right side PCM FX-bus +accumulators. ALSA uses accumulators 14 and 15 for left and right side PCM +samples for 7.1 playback. The result samples are forwarded to the side speakers. name='PCM Center Playback Volume',index=0 ----------------------------------------- -This control is used to attenuate samples for center PCM FX-bus accumulator. -ALSA uses accumulator 6 for center PCM sample for 5.1 playback. The result sample -is forwarded to the center DAC PCM slot of the Philips DAC. +This control is used to attenuate samples from center PCM FX-bus accumulator. +ALSA uses accumulator 6 for center PCM samples for 5.1 playback. The result +samples are forwarded to the center speaker. name='PCM LFE Playback Volume',index=0 -------------------------------------- This control is used to attenuate sample for LFE PCM FX-bus accumulator. -ALSA uses accumulator 7 for LFE PCM sample for 5.1 playback. The result sample -is forwarded to the LFE DAC PCM slot of the Philips DAC. +ALSA uses accumulator 7 for LFE PCM samples for 5.1 playback. The result +samples are forwarded to the subwoofer. name='PCM Playback Volume',index=0 ---------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for -stereo playback. The result samples are forwarded to the front DAC PCM slots -of the Philips DAC. +stereo playback. The result samples are forwarded to the front speakers. name='PCM Capture Volume',index=0 --------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus -accumulator. ALSA uses accumulators 0 and 1 for left and right PCM. -The result is forwarded to the ADC capture FIFO (thus to the standard capture -PCM device). +This control is used to attenuate samples from left and right PCM FX-bus +accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for +stereo playback. The result is forwarded to the standard capture PCM device. name='Music Playback Volume',index=0 ------------------------------------ -This control is used to attenuate samples for left and right MIDI FX-bus +This control is used to attenuate samples from left and right MIDI FX-bus accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples. -The result samples are forwarded to the front DAC PCM slots of the AC97 codec. +The result samples are forwarded to the virtual stereo mixer. name='Music Capture Volume',index=0 ----------------------------------- -These controls are used to attenuate samples for left and right MIDI FX-bus -accumulator. ALSA uses accumulators 4 and 5 for left and right PCM. -The result is forwarded to the ADC capture FIFO (thus to the standard capture -PCM device). +These controls are used to attenuate samples from left and right MIDI FX-bus +accumulator. ALSA uses accumulators 4 and 5 for left and right MIDI samples. +The result is forwarded to the standard capture PCM device. name='Mic Playback Volume',index=0 ---------------------------------- -This control is used to attenuate samples for left and right Mic input. -For Mic input is used AC97 codec. The result samples are forwarded to -the front DAC PCM slots of the Philips DAC. Samples are forwarded to Mic -capture FIFO (device 1 - 16bit/8KHz mono) too without volume control. +This control is used to attenuate samples from left and right Mic input of +the AC97 codec. The result samples are forwarded to the virtual stereo mixer. name='Mic Capture Volume',index=0 --------------------------------- -This control is used to attenuate samples for left and right Mic input. -The result is forwarded to the ADC capture FIFO (thus to the standard capture -PCM device). +This control is used to attenuate samples from left and right Mic input of +the AC97 codec. The result is forwarded to the standard capture PCM device. + +The original samples are also forwarded to the Mic capture PCM device (device 1; +16bit/8KHz mono) without volume control. name='Audigy CD Playback Volume',index=0 ---------------------------------------- This control is used to attenuate samples from left and right IEC958 TTL digital inputs (usually used by a CDROM drive). The result samples are -forwarded to the front DAC PCM slots of the Philips DAC. +forwarded to the virtual stereo mixer. name='Audigy CD Capture Volume',index=0 --------------------------------------- This control is used to attenuate samples from left and right IEC958 TTL -digital inputs (usually used by a CDROM drive). The result samples are -forwarded to the ADC capture FIFO (thus to the standard capture PCM device). +digital inputs (usually used by a CDROM drive). The result is forwarded +to the standard capture PCM device. name='IEC958 Optical Playback Volume',index=0 --------------------------------------------- This control is used to attenuate samples from left and right IEC958 optical -digital input. The result samples are forwarded to the front DAC PCM slots -of the Philips DAC. +digital input. The result samples are forwarded to the virtual stereo mixer. name='IEC958 Optical Capture Volume',index=0 -------------------------------------------- This control is used to attenuate samples from left and right IEC958 optical -digital inputs. The result samples are forwarded to the ADC capture FIFO -(thus to the standard capture PCM device). +digital inputs. The result is forwarded to the standard capture PCM device. name='Line2 Playback Volume',index=0 ------------------------------------ This control is used to attenuate samples from left and right I2S ADC -inputs (on the AudigyDrive). The result samples are forwarded to the front -DAC PCM slots of the Philips DAC. +inputs (on the AudigyDrive). The result samples are forwarded to the virtual +stereo mixer. name='Line2 Capture Volume',index=1 ----------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs (on the AudigyDrive). The result samples are forwarded to the ADC -capture FIFO (thus to the standard capture PCM device). +inputs (on the AudigyDrive). The result is forwarded to the standard capture +PCM device. name='Analog Mix Playback Volume',index=0 ----------------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs from Philips ADC. The result samples are forwarded to the front -DAC PCM slots of the Philips DAC. This contains mix from analog sources -like CD, Line In, Aux, .... +inputs from Philips ADC. The result samples are forwarded to the virtual +stereo mixer. This contains mix from analog sources like CD, Line In, Aux, .... name='Analog Mix Capture Volume',index=1 ---------------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs Philips ADC. The result samples are forwarded to the ADC -capture FIFO (thus to the standard capture PCM device). +inputs Philips ADC. The result is forwarded to the standard capture PCM device. name='Aux2 Playback Volume',index=0 ----------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs (on the AudigyDrive). The result samples are forwarded to the front -DAC PCM slots of the Philips DAC. +inputs (on the AudigyDrive). The result samples are forwarded to the virtual +stereo mixer. name='Aux2 Capture Volume',index=1 ---------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs (on the AudigyDrive). The result samples are forwarded to the ADC -capture FIFO (thus to the standard capture PCM device). +inputs (on the AudigyDrive). The result is forwarded to the standard capture +PCM device. name='Front Playback Volume',index=0 ------------------------------------ -All stereo signals are mixed together and mirrored to surround, center and LFE. -This control is used to attenuate samples for left and right front speakers of -this mix. +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the front speakers. name='Surround Playback Volume',index=0 --------------------------------------- -All stereo signals are mixed together and mirrored to surround, center and LFE. -This control is used to attenuate samples for left and right surround speakers of -this mix. +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the surround (rear) speakers. + +name='Side Playback Volume',index=0 +----------------------------------- +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the side speakers. name='Center Playback Volume',index=0 ------------------------------------- -All stereo signals are mixed together and mirrored to surround, center and LFE. -This control is used to attenuate sample for center speaker of this mix. +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the center speaker. name='LFE Playback Volume',index=0 ---------------------------------- -All stereo signals are mixed together and mirrored to surround, center and LFE. -This control is used to attenuate sample for LFE speaker of this mix. +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the subwoofer. name='Tone Control - Switch',index=0 ------------------------------------ -This control turns the tone control on or off. The samples for front, rear -and center / LFE outputs are affected. +This control turns the tone control on or off. The samples forwarded to +the speaker outputs are affected. name='Tone Control - Bass',index=0 ---------------------------------- @@ -212,8 +213,7 @@ The closest value to pure signal is 20. name='Master Playback Volume',index=0 ------------------------------------- -This control is used to attenuate samples for front, surround, center and -LFE outputs. +This control is used to attenuate samples forwarded to the speaker outputs. name='IEC958 Optical Raw Playback Switch',index=0 ------------------------------------------------- @@ -303,69 +303,4 @@ The channel mapping is following: MANUALS/PATENTS =============== -ftp://opensource.creative.com/pub/doc -------------------------------------- - -Note that the site is defunct, but the documents are available -from various other locations. - -LM4545.pdf - AC97 Codec - -m2049.pdf - The EMU10K1 Digital Audio Processor - -hog63.ps - FX8010 - A DSP Chip Architecture for Audio Effects - - -WIPO Patents ------------- - -WO 9901813 (A1) - Audio Effects Processor with multiple asynchronous streams - (Jan. 14, 1999) - -WO 9901814 (A1) - Processor with Instruction Set for Audio Effects (Jan. 14, 1999) - -WO 9901953 (A1) - Audio Effects Processor having Decoupled Instruction - Execution and Audio Data Sequencing (Jan. 14, 1999) - - -US Patents (https://www.uspto.gov/) ------------------------------------ - -US 5925841 - Digital Sampling Instrument employing cache memory (Jul. 20, 1999) - -US 5928342 - Audio Effects Processor integrated on a single chip - with a multiport memory onto which multiple asynchronous - digital sound samples can be concurrently loaded - (Jul. 27, 1999) - -US 5930158 - Processor with Instruction Set for Audio Effects (Jul. 27, 1999) - -US 6032235 - Memory initialization circuit (Tram) (Feb. 29, 2000) - -US 6138207 - Interpolation looping of audio samples in cache connected to - system bus with prioritization and modification of bus transfers - in accordance with loop ends and minimum block sizes - (Oct. 24, 2000) - -US 6151670 - Method for conserving memory storage using a - pool of short term memory registers - (Nov. 21, 2000) - -US 6195715 - Interrupt control for multiple programs communicating with - a common interrupt by associating programs to GP registers, - defining interrupt register, polling GP registers, and invoking - callback routine associated with defined interrupt register - (Feb. 27, 2001) +See sb-live-mixer.rst. diff --git a/Documentation/sound/cards/emu-mixer.rst b/Documentation/sound/cards/emu-mixer.rst new file mode 100644 index 000000000000..d87a6338d3d8 --- /dev/null +++ b/Documentation/sound/cards/emu-mixer.rst @@ -0,0 +1,226 @@ +================================================== +E-MU Digital Audio System mixer / default DSP code +================================================== + +This document covers the E-MU 0404/1010/1212/1616/1820 PCI/PCI-e/CardBus +cards. + +These cards use regular EMU10K2 (SoundBlaster Audigy) chips, but with an +alternative front-end geared towards semi-professional studio recording. + +This document is based on audigy-mixer.rst. + + +Hardware compatibility +====================== + +The EMU10K2 chips have a very short capture FIFO, which makes recording +unreliable if the card's PCI bus requests are not handled with the +appropriate priority. +This is the case on more modern motherboards, where the PCI bus is only a +secondary peripheral, rather than the actual arbiter of device access. +In particular, I got recording glitches during simultaneous playback on an +Intel DP55 board (memory controller in the CPU), but had success with an +Intel DP45 board (memory controller in the north bridge). + +The PCI Express variants of these cards (which have a PCI bridge on board, +but are otherwise identical) may be less problematic. + + +Driver capabilities +=================== + +This driver supports only 16-bit 44.1/48 kHz operation. The multi-channel +device (see emu10k1-jack.rst) additionally supports 24-bit capture. + +A patchset to enhance the driver is available from `a GitHub repository +<https://github.com/ossilator/linux/tree/ossis-emu10k1>`_. +Its multi-channel device supports 24-bit for both playback and capture, +and also supports full 88.2/96/176.4/192 kHz operation. +It is not going to be upstreamed due to a fundamental disagreement about +what constitutes a good user experience. + + +Digital mixer controls +====================== + +Note that the controls work as attenuators: the maximum value is the neutral +position leaving the signal unchanged. Note that if the same destination is +mentioned in multiple controls, the signal is accumulated and can be clipped +(set to maximal or minimal value without checking for overflow). + +Explanation of used abbreviations: + +DAC + digital to analog converter +ADC + analog to digital converter +LFE + low frequency effects (used as subwoofer signal) +IEC958 + S/PDIF +FX-bus + the EMU10K2 chip has an effect bus containing 64 accumulators. + Each of the synthesizer voices can feed its output to these accumulators + and the DSP microcontroller can operate with the resulting sum. + +name='Clock Source',index=0 +--------------------------- +This control allows switching the word clock between interally generated +44.1 or 48 kHz, or a number of external sources. + +Note: the sources for the 1616 CardBus card are unclear. Please report your +findings. + +name='Clock Fallback',index=0 +----------------------------- +This control determines the internal clock which the card switches to when +the selected external clock source is/becomes invalid. + +name='DAC1 0202 14dB PAD',index=0, etc. +--------------------------------------- +Output attenuation controls. Not available on 0404 cards. + +name='ADC1 14dB PAD 0202',index=0, etc. +--------------------------------------- +Input attenuation controls. Not available on 0404 cards. + +name='Optical Output Mode',index=0 +---------------------------------- +Switches the TOSLINK output port between S/PDIF and ADAT. +Not available on 0404 cards (fixed to S/PDIF). + +name='Optical Input Mode',index=0 +--------------------------------- +Switches the TOSLINK input port between S/PDIF and ADAT. +Not available on 0404 cards (fixed to S/PDIF). + +name='PCM Front Playback Volume',index=0 +---------------------------------------- +This control is used to attenuate samples from left and right front PCM FX-bus +accumulators. ALSA uses accumulators 8 and 9 for left and right front PCM +samples for 5.1 playback. The result samples are forwarded to the DSP 0 & 1 +playback channels. + +name='PCM Surround Playback Volume',index=0 +------------------------------------------- +This control is used to attenuate samples from left and right surround PCM FX-bus +accumulators. ALSA uses accumulators 2 and 3 for left and right surround PCM +samples for 5.1 playback. The result samples are forwarded to the DSP 2 & 3 +playback channels. + +name='PCM Side Playback Volume',index=0 +--------------------------------------- +This control is used to attenuate samples from left and right side PCM FX-bus +accumulators. ALSA uses accumulators 14 and 15 for left and right side PCM +samples for 7.1 playback. The result samples are forwarded to the DSP 6 & 7 +playback channels. + +name='PCM Center Playback Volume',index=0 +----------------------------------------- +This control is used to attenuate samples from the center PCM FX-bus accumulator. +ALSA uses accumulator 6 for center PCM samples for 5.1 playback. The result samples +are forwarded to the DSP 4 playback channel. + +name='PCM LFE Playback Volume',index=0 +-------------------------------------- +This control is used to attenuate samples from the LFE PCM FX-bus accumulator. +ALSA uses accumulator 7 for LFE PCM samples for 5.1 playback. The result samples +are forwarded to the DSP 5 playback channel. + +name='PCM Playback Volume',index=0 +---------------------------------- +This control is used to attenuate samples from left and right PCM FX-bus +accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for +stereo playback. The result samples are forwarded to the virtual stereo mixer. + +name='PCM Capture Volume',index=0 +--------------------------------- +This control is used to attenuate samples from left and right PCM FX-bus +accumulators. ALSA uses accumulators 0 and 1 for left and right PCM. +The result is forwarded to the standard capture PCM device. + +name='Music Playback Volume',index=0 +------------------------------------ +This control is used to attenuate samples from left and right MIDI FX-bus +accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples. +The result samples are forwarded to the virtual stereo mixer. + +name='Music Capture Volume',index=0 +----------------------------------- +These controls are used to attenuate samples from left and right MIDI FX-bus +accumulator. ALSA uses accumulators 4 and 5 for left and right MIDI samples. +The result is forwarded to the standard capture PCM device. + +name='Front Playback Volume',index=0 +------------------------------------ +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the DSP 0 & 1 playback channels. + +name='Surround Playback Volume',index=0 +--------------------------------------- +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the DSP 2 & 3 playback channels. + +name='Side Playback Volume',index=0 +----------------------------------- +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the DSP 6 & 7 playback channels. + +name='Center Playback Volume',index=0 +------------------------------------- +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the DSP 4 playback channel. + +name='LFE Playback Volume',index=0 +---------------------------------- +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the DSP 5 playback channel. + +name='Tone Control - Switch',index=0 +------------------------------------ +This control turns the tone control on or off. The samples forwarded to +the DSP playback channels are affected. + +name='Tone Control - Bass',index=0 +---------------------------------- +This control sets the bass intensity. There is no neutral value!! +When the tone control code is activated, the samples are always modified. +The closest value to pure signal is 20. + +name='Tone Control - Treble',index=0 +------------------------------------ +This control sets the treble intensity. There is no neutral value!! +When the tone control code is activated, the samples are always modified. +The closest value to pure signal is 20. + +name='Master Playback Volume',index=0 +------------------------------------- +This control is used to attenuate samples for all DSP playback channels. + +name='EMU Capture Volume',index=0 +---------------------------------- +This control is used to attenuate samples from the DSP 0 & 1 capture channels. +The result is forwarded to the standard capture PCM device. + +name='DAC Left',index=0, etc. +----------------------------- +Select the source for the given physical audio output. These may be physical +inputs, playback channels (DSP xx, specified as a decimal number), or silence. + +name='DSP x',index=0 +-------------------- +Select the source for the given capture channel (specified as a hexadecimal +digit). Same options as for the physical audio outputs. + + +PCM stream related controls +=========================== + +These controls are described in audigy-mixer.rst. + + +MANUALS/PATENTS +=============== + +See sb-live-mixer.rst. diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index 49c1f2f688f8..e68bbb13c384 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -8,6 +8,7 @@ Card-Specific Information cmipci sb-live-mixer audigy-mixer + emu-mixer emu10k1-jack via82xx-mixer audiophile-usb diff --git a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst index 4dd9bfe01bd8..27667f58aae1 100644 --- a/Documentation/sound/cards/sb-live-mixer.rst +++ b/Documentation/sound/cards/sb-live-mixer.rst @@ -61,61 +61,61 @@ FX-bus ``name='Wave Playback Volume',index=0`` --------------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples. The result samples are forwarded to the front DAC PCM slots of the AC97 codec. ``name='Wave Surround Playback Volume',index=0`` ------------------------------------------------ -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples. The result samples are forwarded to the rear I2S DACs. These DACs operates separately (they are not inside the AC97 codec). ``name='Wave Center Playback Volume',index=0`` ---------------------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples. The result is mixed to mono signal (single channel) and forwarded to the ??rear?? right DAC PCM slot of the AC97 codec. ``name='Wave LFE Playback Volume',index=0`` ------------------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM. The result is mixed to mono signal (single channel) and forwarded to the ??rear?? left DAC PCM slot of the AC97 codec. ``name='Wave Capture Volume',index=0``, ``name='Wave Capture Switch',index=0`` ------------------------------------------------------------------------------ -These controls are used to attenuate samples for left and right PCM FX-bus +These controls are used to attenuate samples from left and right PCM FX-bus accumulator. ALSA uses accumulators 0 and 1 for left and right PCM. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device). ``name='Synth Playback Volume',index=0`` ---------------------------------------- -This control is used to attenuate samples for left and right MIDI FX-bus +This control is used to attenuate samples from left and right MIDI FX-bus accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples. The result samples are forwarded to the front DAC PCM slots of the AC97 codec. ``name='Synth Capture Volume',index=0``, ``name='Synth Capture Switch',index=0`` -------------------------------------------------------------------------------- -These controls are used to attenuate samples for left and right MIDI FX-bus -accumulator. ALSA uses accumulators 4 and 5 for left and right PCM. +These controls are used to attenuate samples from left and right MIDI FX-bus +accumulator. ALSA uses accumulators 4 and 5 for left and right MIDI samples. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device). ``name='Surround Playback Volume',index=0`` ------------------------------------------- -This control is used to attenuate samples for left and right rear PCM FX-bus +This control is used to attenuate samples from left and right rear PCM FX-bus accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples. The result samples are forwarded to the rear I2S DACs. These DACs operate separately (they are not inside the AC97 codec). ``name='Surround Capture Volume',index=0``, ``name='Surround Capture Switch',index=0`` -------------------------------------------------------------------------------------- -These controls are used to attenuate samples for left and right rear PCM FX-bus +These controls are used to attenuate samples from left and right rear PCM FX-bus accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device). @@ -134,7 +134,7 @@ to the ??rear?? left DAC PCM slot of the AC97 codec. ``name='AC97 Playback Volume',index=0`` --------------------------------------- -This control is used to attenuate samples for left and right front ADC PCM slots +This control is used to attenuate samples from left and right front ADC PCM slots of the AC97 codec. The result samples are forwarded to the front DAC PCM slots of the AC97 codec. @@ -145,7 +145,7 @@ slots of the AC97 codec. ``name='AC97 Capture Volume',index=0`` -------------------------------------- -This control is used to attenuate samples for left and right front ADC PCM slots +This control is used to attenuate samples from left and right front ADC PCM slots of the AC97 codec. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device). diff --git a/Documentation/sound/designs/midi-2.0.rst b/Documentation/sound/designs/midi-2.0.rst index 27d0d3dea1b0..45987f256b97 100644 --- a/Documentation/sound/designs/midi-2.0.rst +++ b/Documentation/sound/designs/midi-2.0.rst @@ -376,3 +376,191 @@ Sequencer API Extensions name and attributes accordingly, and notifies the changes via the announcement to the ALSA sequencer system port, similarly like the normal port change notification. + + +MIDI2 USB Gadget Function Driver +================================ + +The latest kernel contains the support for USB MIDI 2.0 gadget +function driver, which can be used for prototyping and debugging MIDI +2.0 features. + +`CONFIG_USB_GADGET`, `CONFIG_USB_CONFIGFS` and +`CONFIG_USB_CONFIGFS_F_MIDI2` need to be enabled for the MIDI2 gadget +driver. + +In addition, for using a gadget driver, you need a working UDC driver. +In the example below, we use `dummy_hcd` driver (enabled via +`CONFIG_USB_DUMMY_HCD`) that is available on PC and VM for debugging +purpose. There are other UDC drivers depending on the platform, and +those can be used for a real device, instead, too. + +At first, on a system to run the gadget, load `libcomposite` module:: + + % modprobe libcomposite + +and you'll have `usb_gadget` subdirectory under configfs space +(typically `/sys/kernel/config` on modern OS). Then create a gadget +instance and add configurations there, for example:: + + % cd /sys/kernel/config + % mkdir usb_gadget/g1 + + % cd usb_gadget/g1 + % mkdir configs/c.1 + % mkdir functions/midi2.usb0 + + % echo 0x0004 > idProduct + % echo 0x17b3 > idVendor + % mkdir strings/0x409 + % echo "ACME Enterprises" > strings/0x409/manufacturer + % echo "ACMESynth" > strings/0x409/product + % echo "ABCD12345" > strings/0x409/serialnumber + + % mkdir configs/c.1/strings/0x409 + % echo "Monosynth" > configs/c.1/strings/0x409/configuration + % echo 120 > configs/c.1/MaxPower + +At this point, there must be a subdirectory `ep.0`, and that is the +configuration for a UMP Endpoint. You can fill the Endpoint +information like:: + + % echo "ACMESynth" > functions/midi2.usb0/iface_name + % echo "ACMESynth" > functions/midi2.usb0/ep.0/ep_name + % echo "ABCD12345" > functions/midi2.usb0/ep.0/product_id + % echo 0x0123 > functions/midi2.usb0/ep.0/family + % echo 0x4567 > functions/midi2.usb0/ep.0/model + % echo 0x123456 > functions/midi2.usb0/ep.0/manufacturer + % echo 0x12345678 > functions/midi2.usb0/ep.0/sw_revision + +The default MIDI protocol can be set either 1 or 2:: + + % echo 2 > functions/midi2.usb0/ep.0/protocol + +And, you can find a subdirectory `block.0` under this Endpoint +subdirectory. This defines the Function Block information:: + + % echo "Monosynth" > functions/midi2.usb0/ep.0/block.0/name + % echo 0 > functions/midi2.usb0/ep.0/block.0/first_group + % echo 1 > functions/midi2.usb0/ep.0/block.0/num_groups + +Finally, link the configuration and enable it:: + + % ln -s functions/midi2.usb0 configs/c.1 + % echo dummy_udc.0 > UDC + +where `dummy_udc.0` is an example case and it differs depending on the +system. You can find the UDC instances in `/sys/class/udc` and pass +the found name instead:: + + % ls /sys/class/udc + dummy_udc.0 + +Now, the MIDI 2.0 gadget device is enabled, and the gadget host +creates a new sound card instance containing a UMP rawmidi device by +`f_midi2` driver:: + + % cat /proc/asound/cards + .... + 1 [Gadget ]: f_midi2 - MIDI 2.0 Gadget + MIDI 2.0 Gadget + +And on the connected host, a similar card should appear, too, but with +the card and device names given in the configfs above:: + + % cat /proc/asound/cards + .... + 2 [ACMESynth ]: USB-Audio - ACMESynth + ACME Enterprises ACMESynth at usb-dummy_hcd.0-1, high speed + +You can play a MIDI file on the gadget side:: + + % aplaymidi -p 20:1 to_host.mid + +and this will appear as an input from a MIDI device on the connected +host:: + + % aseqdump -p 20:0 -u 2 + +Vice versa, a playback on the connected host will work as an input on +the gadget, too. + +Each Function Block may have different direction and UI-hint, +specified via `direction` and `ui_hint` attributes. +Passing `1` is for input-only, `2` for out-only and `3` for +bidirectional (the default value). For example:: + + % echo 2 > functions/midi2.usb0/ep.0/block.0/direction + % echo 2 > functions/midi2.usb0/ep.0/block.0/ui_hint + +When you need more than one Function Blocks, you can create +subdirectories `block.1`, `block.2`, etc dynamically, and configure +them in the configuration procedure above before linking. +For example, to create a second Function Block for a keyboard:: + + % mkdir functions/midi2.usb0/ep.0/block.1 + % echo "Keyboard" > functions/midi2.usb0/ep.0/block.1/name + % echo 1 > functions/midi2.usb0/ep.0/block.1/first_group + % echo 1 > functions/midi2.usb0/ep.0/block.1/num_groups + % echo 1 > functions/midi2.usb0/ep.0/block.1/direction + % echo 1 > functions/midi2.usb0/ep.0/block.1/ui_hint + +The `block.*` subdirectories can be removed dynamically, too (except +for `block.0` which is persistent). + +For assigning a Function Block for MIDI 1.0 I/O, set up in `is_midi1` +attribute. 1 is for MIDI 1.0, and 2 is for MIDI 1.0 with low speed +connection:: + + % echo 2 > functions/midi2.usb0/ep.0/block.1/is_midi1 + +For disabling the processing of UMP Stream messages in the gadget +driver, pass `0` to `process_ump` attribute in the top-level config:: + + % echo 0 > functions/midi2.usb0/process_ump + +The MIDI 1.0 interface at altset 0 is supported by the gadget driver, +too. When MIDI 1.0 interface is selected by the connected host, the +UMP I/O on the gadget is translated from/to USB MIDI 1.0 packets +accordingly while the gadget driver keeps communicating with the +user-space over UMP rawmidi. + +MIDI 1.0 ports are set up from the config in each Function Block. +For example:: + + % echo 0 > functions/midi2.usb0/ep.0/block.0/midi1_first_group + % echo 1 > functions/midi2.usb0/ep.0/block.0/midi1_num_groups + +The configuration above will enable the Group 1 (the index 0) for MIDI +1.0 interface. Note that those groups must be in the groups defined +for the Function Block itself. + +The gadget driver supports more than one UMP Endpoints, too. +Similarly like the Function Blocks, you can create a new subdirectory +`ep.1` (but under the card top-level config) to enable a new Endpoint:: + + % mkdir functions/midi2.usb0/ep.1 + +and create a new Function Block there. For example, to create 4 +Groups for the Function Block of this new Endpoint:: + + % mkdir functions/midi2.usb0/ep.1/block.0 + % echo 4 > functions/midi2.usb0/ep.1/block.0/num_groups + +Now, you'll have 4 rawmidi devices in total: the first two are UMP +rawmidi devices for Endpoint 0 and Endpoint 1, and other two for the +legacy MIDI 1.0 rawmidi devices corresponding to both EP 0 and EP 1. + +The current altsetting on the gadget can be informed via a control +element "Operation Mode" with `RAWMIDI` iface. e.g. you can read it +via `amixer` program running on the gadget host like:: + + % amixer -c1 cget iface=RAWMIDI,name='Operation Mode' + ; type=INTEGER,access=r--v----,values=1,min=0,max=2,step=0 + : values=2 + +The value (shown in the second returned line with `: values=`) +indicates 1 for MIDI 1.0 (altset 0), 2 for MIDI 2.0 (altset 1) and 0 +for unset. + +As of now, the configurations can't be changed after binding. diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index 4335c98b3d82..cd421856409e 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -2018,8 +2018,8 @@ sleeping poll threads, etc. This callback is also atomic by default. -copy_user, copy_kernel and fill_silence ops -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +copy and fill_silence ops +~~~~~~~~~~~~~~~~~~~~~~~~~ These callbacks are not mandatory, and can be omitted in most cases. These callbacks are used when the hardware buffer cannot be in the @@ -3444,8 +3444,8 @@ external hardware buffer in interrupts (or in tasklets, preferably). The first case works fine if the external hardware buffer is large enough. This method doesn't need any extra buffers and thus is more -efficient. You need to define the ``copy_user`` and ``copy_kernel`` -callbacks for the data transfer, in addition to the ``fill_silence`` +efficient. You need to define the ``copy`` callback +for the data transfer, in addition to the ``fill_silence`` callback for playback. However, there is a drawback: it cannot be mmapped. The examples are GUS's GF1 PCM or emu8000's wavetable PCM. @@ -3458,22 +3458,22 @@ Another case is when the chip uses a PCI memory-map region for the buffer instead of the host memory. In this case, mmap is available only on certain architectures like the Intel one. In non-mmap mode, the data cannot be transferred as in the normal way. Thus you need to define the -``copy_user``, ``copy_kernel`` and ``fill_silence`` callbacks as well, +``copy`` and ``fill_silence`` callbacks as well, as in the cases above. Examples are found in ``rme32.c`` and ``rme96.c``. -The implementation of the ``copy_user``, ``copy_kernel`` and +The implementation of the ``copy`` and ``silence`` callbacks depends upon whether the hardware supports -interleaved or non-interleaved samples. The ``copy_user`` callback is +interleaved or non-interleaved samples. The ``copy`` callback is defined like below, a bit differently depending on whether the direction is playback or capture:: - static int playback_copy_user(struct snd_pcm_substream *substream, + static int playback_copy(struct snd_pcm_substream *substream, int channel, unsigned long pos, - void __user *src, unsigned long count); - static int capture_copy_user(struct snd_pcm_substream *substream, + struct iov_iter *src, unsigned long count); + static int capture_copy(struct snd_pcm_substream *substream, int channel, unsigned long pos, - void __user *dst, unsigned long count); + struct iov_iter *dst, unsigned long count); In the case of interleaved samples, the second argument (``channel``) is not used. The third argument (``pos``) specifies the position in bytes. @@ -3490,18 +3490,17 @@ of data (``count``) at the specified pointer (``src``) to the specified offset (``pos``) in the hardware buffer. When coded like memcpy-like way, the copy would look like:: - my_memcpy_from_user(my_buffer + pos, src, count); + my_memcpy_from_iter(my_buffer + pos, src, count); For the capture direction, you copy the given amount of data (``count``) at the specified offset (``pos``) in the hardware buffer to the specified pointer (``dst``):: - my_memcpy_to_user(dst, my_buffer + pos, count); + my_memcpy_to_iter(dst, my_buffer + pos, count); -Here the functions are named ``from_user`` and ``to_user`` because -it's the user-space buffer that is passed to these callbacks. That -is, the callback is supposed to copy data from/to the user-space -directly to/from the hardware buffer. +The given ``src`` or ``dst`` a struct iov_iter pointer containing the +pointer and the size. Use the existing helpers to copy or access the +data as defined in ``linux/uio.h``. Careful readers might notice that these callbacks receive the arguments in bytes, not in frames like other callbacks. It's because @@ -3519,25 +3518,6 @@ the given user-space buffer, but only for the given channel. For details, please check ``isa/gus/gus_pcm.c`` or ``pci/rme9652/rme9652.c`` as examples. -The above callbacks are the copies from/to the user-space buffer. There -are some cases where we want to copy from/to the kernel-space buffer -instead. In such a case, the ``copy_kernel`` callback is called. It'd -look like:: - - static int playback_copy_kernel(struct snd_pcm_substream *substream, - int channel, unsigned long pos, - void *src, unsigned long count); - static int capture_copy_kernel(struct snd_pcm_substream *substream, - int channel, unsigned long pos, - void *dst, unsigned long count); - -As found easily, the only difference is that the buffer pointer is -without a ``__user`` prefix; that is, a kernel-buffer pointer is passed -in the fourth argument. Correspondingly, the implementation would be -a version without the user-copy, such as:: - - my_memcpy(my_buffer + pos, src, count); - Usually for the playback, another callback ``fill_silence`` is defined. It's implemented in a similar way as the copy callbacks above:: @@ -3545,10 +3525,10 @@ above:: static int silence(struct snd_pcm_substream *substream, int channel, unsigned long pos, unsigned long count); -The meanings of arguments are the same as in the ``copy_user`` and -``copy_kernel`` callbacks, although there is no buffer pointer +The meanings of arguments are the same as in the ``copy`` callback, +although there is no buffer pointer argument. In the case of interleaved samples, the channel argument has -no meaning, as for the ``copy_*`` callbacks. +no meaning, as for the ``copy`` callback. The role of the ``fill_silence`` callback is to set the given amount (``count``) of silence data at the specified offset (``pos``) in the diff --git a/Documentation/translations/zh_CN/mm/frontswap.rst b/Documentation/translations/zh_CN/mm/frontswap.rst deleted file mode 100644 index 434975390b48..000000000000 --- a/Documentation/translations/zh_CN/mm/frontswap.rst +++ /dev/null @@ -1,196 +0,0 @@ -:Original: Documentation/mm/frontswap.rst - -:翻译: - - 司延腾 Yanteng Si <siyanteng@loongson.cn> - -:校译: - -========= -Frontswap -========= - -Frontswap为交换页提供了一个 “transcendent memory” 的接口。在一些环境中，由 -于交换页被保存在RAM（或类似RAM的设备）中，而不是交换磁盘，因此可以获得巨大的性能 -节省（提高）。 - -.. _Transcendent memory in a nutshell: https://lwn.net/Articles/454795/ - -Frontswap之所以这么命名，是因为它可以被认为是与swap设备的“back”存储相反。存 -储器被认为是一个同步并发安全的面向页面的“伪RAM设备”，符合transcendent memory -（如Xen的“tmem”，或内核内压缩内存，又称“zcache”，或未来的类似RAM的设备）的要 -求；这个伪RAM设备不能被内核直接访问或寻址，其大小未知且可能随时间变化。驱动程序通过 -调用frontswap_register_ops将自己与frontswap链接起来，以适当地设置frontswap_ops -的功能，它提供的功能必须符合某些策略，如下所示: - -一个 “init” 将设备准备好接收与指定的交换设备编号（又称“类型”）相关的frontswap -交换页。一个 “store” 将把该页复制到transcendent memory，并与该页的类型和偏移 -量相关联。一个 “load” 将把该页，如果找到的话，从transcendent memory复制到内核 -内存，但不会从transcendent memory中删除该页。一个 “invalidate_page” 将从 -transcendent memory中删除该页，一个 “invalidate_area” 将删除所有与交换类型 -相关的页（例如，像swapoff）并通知 “device” 拒绝进一步存储该交换类型。 - -一旦一个页面被成功存储，在该页面上的匹配加载通常会成功。因此，当内核发现自己处于需 -要交换页面的情况时，它首先尝试使用frontswap。如果存储的结果是成功的，那么数据就已 -经成功的保存到了transcendent memory中，并且避免了磁盘写入，如果后来再读回数据， -也避免了磁盘读取。如果存储返回失败，transcendent memory已经拒绝了该数据，且该页 -可以像往常一样被写入交换空间。 - -请注意，如果一个页面被存储，而该页面已经存在于transcendent memory中（一个 “重复” -的存储），要么存储成功，数据被覆盖，要么存储失败，该页面被废止。这确保了旧的数据永远 -不会从frontswap中获得。 - -如果配置正确，对frontswap的监控是通过 `/sys/kernel/debug/frontswap` 目录下的 -debugfs完成的。frontswap的有效性可以通过以下方式测量（在所有交换设备中）: - -``failed_stores`` - 有多少次存储的尝试是失败的 - -``loads`` - 尝试了多少次加载（应该全部成功） - -``succ_stores`` - 有多少次存储的尝试是成功的 - -``invalidates`` - 尝试了多少次作废 - -后台实现可以提供额外的指标。 - -经常问到的问题 -============== - -* 价值在哪里? - -当一个工作负载开始交换时，性能就会下降。Frontswap通过提供一个干净的、动态的接口来 -读取和写入交换页到 “transcendent memory”，从而大大增加了许多这样的工作负载的性 -能，否则内核是无法直接寻址的。当数据被转换为不同的形式和大小（比如压缩）或者被秘密 -移动（对于一些类似RAM的设备来说，这可能对写平衡很有用）时，这个接口是理想的。交换 -页（和被驱逐的页面缓存页）是这种比RAM慢但比磁盘快得多的“伪RAM设备”的一大用途。 - -Frontswap对内核的影响相当小，为各种系统配置中更动态、更灵活的RAM利用提供了巨大的 -灵活性： - -在单一内核的情况下，又称“zcache”，页面被压缩并存储在本地内存中，从而增加了可以安 -全保存在RAM中的匿名页面总数。Zcache本质上是用压缩/解压缩的CPU周期换取更好的内存利 -用率。Benchmarks测试显示，当内存压力较低时，几乎没有影响，而在高内存压力下的一些 -工作负载上，则有明显的性能改善（25%以上）。 - -“RAMster” 在zcache的基础上增加了对集群系统的 “peer-to-peer” transcendent memory -的支持。Frontswap页面像zcache一样被本地压缩，但随后被“remotified” 到另一个系 -统的RAM。这使得RAM可以根据需要动态地来回负载平衡，也就是说，当系统A超载时，它可以 -交换到系统B，反之亦然。RAMster也可以被配置成一个内存服务器，因此集群中的许多服务器 -可以根据需要动态地交换到配置有大量内存的单一服务器上......而不需要预先配置每个客户 -有多少内存可用 - -在虚拟情况下，虚拟化的全部意义在于统计地将物理资源在多个虚拟机的不同需求之间进行复 -用。对于RAM来说，这真的很难做到，而且在不改变内核的情况下，要做好这一点的努力基本上 -是失败的（除了一些广为人知的特殊情况下的工作负载）。具体来说，Xen Transcendent Memory -后端允许管理器拥有的RAM “fallow”，不仅可以在多个虚拟机之间进行“time-shared”， -而且页面可以被压缩和重复利用，以优化RAM的利用率。当客户操作系统被诱导交出未充分利用 -的RAM时（如 “selfballooning”），突然出现的意外内存压力可能会导致交换；frontswap -允许这些页面被交换到管理器RAM中或从管理器RAM中交换（如果整体主机系统内存条件允许）， -从而减轻计划外交换可能带来的可怕的性能影响。 - -一个KVM的实现正在进行中，并且已经被RFC'ed到lkml。而且，利用frontswap，对NVM作为 -内存扩展技术的调查也在进行中。 - -* 当然，在某些情况下可能有性能上的优势，但frontswap的空间/时间开销是多少？ - -如果 CONFIG_FRONTSWAP 被禁用，每个 frontswap 钩子都会编译成空，唯一的开销是每 -个 swapon'ed swap 设备的几个额外字节。如果 CONFIG_FRONTSWAP 被启用，但没有 -frontswap的 “backend” 寄存器，每读或写一个交换页就会有一个额外的全局变量，而不 -是零。如果 CONFIG_FRONTSWAP 被启用，并且有一个frontswap的backend寄存器，并且 -后端每次 “store” 请求都失败（即尽管声称可能，但没有提供内存），CPU 的开销仍然可以 -忽略不计 - 因为每次frontswap失败都是在交换页写到磁盘之前，系统很可能是 I/O 绑定 -的，无论如何使用一小部分的 CPU 都是不相关的。 - -至于空间，如果CONFIG_FRONTSWAP被启用，并且有一个frontswap的backend注册，那么 -每个交换设备的每个交换页都会被分配一个比特。这是在内核已经为每个交换设备的每个交换 -页分配的8位（在2.6.34之前是16位）上增加的。(Hugh Dickins观察到，frontswap可能 -会偷取现有的8个比特，但是我们以后再来担心这个小的优化问题)。对于标准的4K页面大小的 -非常大的交换盘（这很罕见），这是每32GB交换盘1MB开销。 - -当交换页存储在transcendent memory中而不是写到磁盘上时，有一个副作用，即这可能会 -产生更多的内存压力，有可能超过其他的优点。一个backend，比如zcache，必须实现策略 -来仔细（但动态地）管理内存限制，以确保这种情况不会发生。 - -* 好吧，那就用内核骇客能理解的术语来快速概述一下这个frontswap补丁的作用如何？ - -我们假设在内核初始化过程中，一个frontswap 的 “backend” 已经注册了；这个注册表 -明这个frontswap 的 “backend” 可以访问一些不被内核直接访问的“内存”。它到底提 -供了多少内存是完全动态和随机的。 - -每当一个交换设备被交换时，就会调用frontswap_init()，把交换设备的编号（又称“类 -型”）作为一个参数传给它。这就通知了frontswap，以期待 “store” 与该号码相关的交 -换页的尝试。 - -每当交换子系统准备将一个页面写入交换设备时（参见swap_writepage()），就会调用 -frontswap_store。Frontswap与frontswap backend协商，如果backend说它没有空 -间，frontswap_store返回-1，内核就会照常把页换到交换设备上。注意，来自frontswap -backend的响应对内核来说是不可预测的；它可能选择从不接受一个页面，可能接受每九个 -页面，也可能接受每一个页面。但是如果backend确实接受了一个页面，那么这个页面的数 -据已经被复制并与类型和偏移量相关联了，而且backend保证了数据的持久性。在这种情况 -下，frontswap在交换设备的“frontswap_map” 中设置了一个位，对应于交换设备上的 -页面偏移量，否则它就会将数据写入该设备。 - -当交换子系统需要交换一个页面时（swap_readpage()），它首先调用frontswap_load()， -检查frontswap_map，看这个页面是否早先被frontswap backend接受。如果是，该页 -的数据就会从frontswap后端填充，换入就完成了。如果不是，正常的交换代码将被执行， -以便从真正的交换设备上获得这一页的数据。 - -所以每次frontswap backend接受一个页面时，交换设备的读取和（可能）交换设备的写 -入都被 “frontswap backend store” 和（可能）“frontswap backend loads” -所取代，这可能会快得多。 - -* frontswap不能被配置为一个 “特殊的” 交换设备，它的优先级要高于任何真正的交换 - 设备（例如像zswap，或者可能是swap-over-nbd/NFS）？ - -首先，现有的交换子系统不允许有任何种类的交换层次结构。也许它可以被重写以适应层次 -结构，但这将需要相当大的改变。即使它被重写，现有的交换子系统也使用了块I/O层，它 -假定交换设备是固定大小的，其中的任何页面都是可线性寻址的。Frontswap几乎没有触 -及现有的交换子系统，而是围绕着块I/O子系统的限制，提供了大量的灵活性和动态性。 - -例如，frontswap backend对任何交换页的接受是完全不可预测的。这对frontswap backend -的定义至关重要，因为它赋予了backend完全动态的决定权。在zcache中，人们无法预 -先知道一个页面的可压缩性如何。可压缩性 “差” 的页面会被拒绝，而 “差” 本身也可 -以根据当前的内存限制动态地定义。 - -此外，frontswap是完全同步的，而真正的交换设备，根据定义，是异步的，并且使用 -块I/O。块I/O层不仅是不必要的，而且可能进行 “优化”，这对面向RAM的设备来说是 -不合适的，包括将一些页面的写入延迟相当长的时间。同步是必须的，以确保后端的动 -态性，并避免棘手的竞争条件，这将不必要地大大增加frontswap和/或块I/O子系统的 -复杂性。也就是说，只有最初的 “store” 和 “load” 操作是需要同步的。一个独立 -的异步线程可以自由地操作由frontswap存储的页面。例如，RAMster中的 “remotification” -线程使用标准的异步内核套接字，将压缩的frontswap页面移动到远程机器。同样， -KVM的客户方实现可以进行客户内压缩，并使用 “batched” hypercalls。 - -在虚拟化环境中，动态性允许管理程序（或主机操作系统）做“intelligent overcommit”。 -例如，它可以选择只接受页面，直到主机交换可能即将发生，然后强迫客户机做他们 -自己的交换。 - -transcendent memory规格的frontswap有一个坏处。因为任何 “store” 都可 -能失败，所以必须在一个真正的交换设备上有一个真正的插槽来交换页面。因此， -frontswap必须作为每个交换设备的 “影子” 来实现，它有可能容纳交换设备可能 -容纳的每一个页面，也有可能根本不容纳任何页面。这意味着frontswap不能包含比 -swap设备总数更多的页面。例如，如果在某些安装上没有配置交换设备，frontswap -就没有用。无交换设备的便携式设备仍然可以使用frontswap，但是这种设备的 -backend必须配置某种 “ghost” 交换设备，并确保它永远不会被使用。 - - -* 为什么会有这种关于 “重复存储” 的奇怪定义？如果一个页面以前被成功地存储过， - 难道它不能总是被成功地覆盖吗？ - -几乎总是可以的，不，有时不能。考虑一个例子，数据被压缩了，原来的4K页面被压 -缩到了1K。现在，有人试图用不可压缩的数据覆盖该页，因此会占用整个4K。但是 -backend没有更多的空间了。在这种情况下，这个存储必须被拒绝。每当frontswap -拒绝一个会覆盖的存储时，它也必须使旧的数据作废，并确保它不再被访问。因为交 -换子系统会把新的数据写到读交换设备上，这是确保一致性的正确做法。 - -* 为什么frontswap补丁会创建新的头文件swapfile.h？ - -frontswap代码依赖于一些swap子系统内部的数据结构，这些数据结构多年来一直 -在静态和全局之间来回移动。这似乎是一个合理的妥协：将它们定义为全局，但在一 -个新的包含文件中声明它们，该文件不被包含swap.h的大量源文件所包含。 - -Dan Magenheimer，最后更新于2012年4月9日 diff --git a/Documentation/translations/zh_CN/mm/hugetlbfs_reserv.rst b/Documentation/translations/zh_CN/mm/hugetlbfs_reserv.rst index 45048a30f736..20947f8bd065 100644 --- a/Documentation/translations/zh_CN/mm/hugetlbfs_reserv.rst +++ b/Documentation/translations/zh_CN/mm/hugetlbfs_reserv.rst @@ -219,7 +219,7 @@ vma_commit_reservation()之间，预留映射有可能被改变。如果hugetlb_ 释放巨页 ======== -巨页释放是由函数free_huge_page()执行的。这个函数是hugetlbfs复合页的析构器。因此，它只传 +巨页释放是由函数free_huge_folio()执行的。这个函数是hugetlbfs复合页的析构器。因此，它只传 递一个指向页面结构体的指针。当一个巨页被释放时，可能需要进行预留计算。如果该页与包含保 留的子池相关联，或者该页在错误路径上被释放，必须恢复全局预留计数，就会出现这种情况。 @@ -387,7 +387,7 @@ region_count()在解除私有巨页映射时被调用。在私有映射中，预 然而，有几种情况是，在一个巨页被分配后，但在它被实例化之前，就遇到了错误。在这种情况下， 页面分配已经消耗了预留，并进行了适当的子池、预留映射和全局计数调整。如果页面在这个时候被释放 -（在实例化和清除PagePrivate之前），那么free_huge_page将增加全局预留计数。然而，预留映射 +（在实例化和清除PagePrivate之前），那么free_huge_folio将增加全局预留计数。然而，预留映射 显示报留被消耗了。这种不一致的状态将导致预留的巨页的 “泄漏” 。全局预留计数将比它原本的要高， 并阻止分配一个预先分配的页面。 diff --git a/Documentation/translations/zh_CN/mm/index.rst b/Documentation/translations/zh_CN/mm/index.rst index 2f53e37b8049..b950dd118be7 100644 --- a/Documentation/translations/zh_CN/mm/index.rst +++ b/Documentation/translations/zh_CN/mm/index.rst @@ -42,7 +42,6 @@ Linux内存管理文档 damon/index free_page_reporting ksm - frontswap hmm hwpoison hugetlbfs_reserv diff --git a/Documentation/translations/zh_CN/mm/split_page_table_lock.rst b/Documentation/translations/zh_CN/mm/split_page_table_lock.rst index 4fb7aa666037..a2c288670a24 100644 --- a/Documentation/translations/zh_CN/mm/split_page_table_lock.rst +++ b/Documentation/translations/zh_CN/mm/split_page_table_lock.rst @@ -56,16 +56,16 @@ Hugetlb特定的辅助函数: 架构对分页表锁的支持 ==================== -没有必要特别启用PTE分页表锁：所有需要的东西都由pgtable_pte_page_ctor() -和pgtable_pte_page_dtor()完成，它们必须在PTE表分配/释放时被调用。 +没有必要特别启用PTE分页表锁：所有需要的东西都由pagetable_pte_ctor() +和pagetable_pte_dtor()完成，它们必须在PTE表分配/释放时被调用。 确保架构不使用slab分配器来分配页表：slab使用page->slab_cache来分配其页 面。这个区域与page->ptl共享存储。 PMD分页锁只有在你有两个以上的页表级别时才有意义。 -启用PMD分页锁需要在PMD表分配时调用pgtable_pmd_page_ctor()，在释放时调 -用pgtable_pmd_page_dtor()。 +启用PMD分页锁需要在PMD表分配时调用pagetable_pmd_ctor()，在释放时调 +用pagetable_pmd_dtor()。 分配通常发生在pmd_alloc_one()中，释放发生在pmd_free()和pmd_free_tlb() 中，但要确保覆盖所有的PMD表分配/释放路径：即X86_PAE在pgd_alloc()中预先 @@ -73,7 +73,7 @@ PMD分页锁只有在你有两个以上的页表级别时才有意义。 一切就绪后，你可以设置CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK。 -注意：pgtable_pte_page_ctor()和pgtable_pmd_page_ctor()可能失败--必 +注意：pagetable_pte_ctor()和pagetable_pmd_ctor()可能失败--必 须正确处理。 page->ptl @@ -90,7 +90,7 @@ page->ptl用于访问分割页表锁，其中'page'是包含该表的页面struc 的指针并动态分配它。这允许在启用DEBUG_SPINLOCK或DEBUG_LOCK_ALLOC的 情况下使用分页锁，但由于间接访问而多花了一个缓存行。 -PTE表的spinlock_t分配在pgtable_pte_page_ctor()中，PMD表的spinlock_t -分配在pgtable_pmd_page_ctor()中。 +PTE表的spinlock_t分配在pagetable_pte_ctor()中，PMD表的spinlock_t +分配在pagetable_pmd_ctor()中。 请不要直接访问page->ptl - -使用适当的辅助函数。 diff --git a/Documentation/userspace-api/netlink/genetlink-legacy.rst b/Documentation/userspace-api/netlink/genetlink-legacy.rst index 802875a37a27..40b82ad5d54a 100644 --- a/Documentation/userspace-api/netlink/genetlink-legacy.rst +++ b/Documentation/userspace-api/netlink/genetlink-legacy.rst @@ -8,11 +8,8 @@ This document describes the many additional quirks and properties required to describe older Generic Netlink families which form the ``genetlink-legacy`` protocol level. -The spec is a work in progress, some of the quirks are just documented -for future reference. - -Specification (defined) -======================= +Specification +============= Attribute type nests -------------------- @@ -156,16 +153,27 @@ it will be allocated 3 for the request (``a`` is the previous operation with a request section and the value of 2) and 8 for response (``c`` is the previous operation in the "from-kernel" direction). -Other quirks (todo) -=================== +Other quirks +============ Structures ---------- Legacy families can define C structures both to be used as the contents of an attribute and as a fixed message header. Structures are defined in -``definitions`` and referenced in operations or attributes. Note that -structures defined in YAML are implicitly packed according to C +``definitions`` and referenced in operations or attributes. + +members +~~~~~~~ + + - ``name`` - The attribute name of the struct member + - ``type`` - One of the scalar types ``u8``, ``u16``, ``u32``, ``u64``, ``s8``, + ``s16``, ``s32``, ``s64``, ``string`` or ``binary``. + - ``byte-order`` - ``big-endian`` or ``little-endian`` + - ``doc``, ``enum``, ``enum-as-flags``, ``display-hint`` - Same as for + :ref:`attribute definitions <attribute_properties>` + +Note that structures defined in YAML are implicitly packed according to C conventions. For example, the following struct is 4 bytes, not 6 bytes: .. code-block:: c diff --git a/Documentation/userspace-api/netlink/index.rst b/Documentation/userspace-api/netlink/index.rst index 26f3720cb3be..62725dafbbdb 100644 --- a/Documentation/userspace-api/netlink/index.rst +++ b/Documentation/userspace-api/netlink/index.rst @@ -14,5 +14,6 @@ Netlink documentation for users. specs c-code-gen genetlink-legacy + netlink-raw See also :ref:`Documentation/core-api/netlink.rst <kernel_netlink>`. diff --git a/Documentation/userspace-api/netlink/netlink-raw.rst b/Documentation/userspace-api/netlink/netlink-raw.rst new file mode 100644 index 000000000000..f07fb9b9c101 --- /dev/null +++ b/Documentation/userspace-api/netlink/netlink-raw.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: BSD-3-Clause + +====================================================== +Netlink specification support for raw Netlink families +====================================================== + +This document describes the additional properties required by raw Netlink +families such as ``NETLINK_ROUTE`` which use the ``netlink-raw`` protocol +specification. + +Specification +============= + +The netlink-raw schema extends the :doc:`genetlink-legacy <genetlink-legacy>` +schema with properties that are needed to specify the protocol numbers and +multicast IDs used by raw netlink families. See :ref:`classic_netlink` for more +information. + +Globals +------- + +protonum +~~~~~~~~ + +The ``protonum`` property is used to specify the protocol number to use when +opening a netlink socket. + +.. code-block:: yaml + + # SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + + name: rt-addr + protocol: netlink-raw + protonum: 0 # part of the NETLINK_ROUTE protocol + + +Multicast group properties +-------------------------- + +value +~~~~~ + +The ``value`` property is used to specify the group ID to use for multicast +group registration. + +.. code-block:: yaml + + mcast-groups: + list: + - + name: rtnlgrp-ipv4-ifaddr + value: 5 + - + name: rtnlgrp-ipv6-ifaddr + value: 9 + - + name: rtnlgrp-mctp-ifaddr + value: 34 diff --git a/Documentation/userspace-api/netlink/specs.rst b/Documentation/userspace-api/netlink/specs.rst index 2e4acde890b7..cc4e2430997e 100644 --- a/Documentation/userspace-api/netlink/specs.rst +++ b/Documentation/userspace-api/netlink/specs.rst @@ -68,6 +68,10 @@ The following sections describe the properties of the most modern ``genetlink`` schema. See the documentation of :doc:`genetlink-c <c-code-gen>` for information on how C names are derived from name properties. +See also :ref:`Documentation/core-api/netlink.rst <kernel_netlink>` for +information on the Netlink specification properties that are only relevant to +the kernel space and not part of the user space API. + genetlink ========= @@ -180,6 +184,8 @@ attributes List of attributes in the set. +.. _attribute_properties: + Attribute properties -------------------- @@ -264,6 +270,13 @@ a C array of u32 values can be specified with ``type: binary`` and ``sub-type: u32``. Binary types and legacy array formats are described in more detail in :doc:`genetlink-legacy`. +display-hint +~~~~~~~~~~~~ + +Optional format indicator that is intended only for choosing the right +formatting mechanism when displaying values of this type. Currently supported +hints are ``hex``, ``mac``, ``fddi``, ``ipv4``, ``ipv6`` and ``uuid``. + operations ---------- diff --git a/Documentation/wmi/devices/dell-wmi-ddv.rst b/Documentation/wmi/devices/dell-wmi-ddv.rst index 30313977bd25..2fcdfcf03327 100644 --- a/Documentation/wmi/devices/dell-wmi-ddv.rst +++ b/Documentation/wmi/devices/dell-wmi-ddv.rst @@ -187,7 +187,8 @@ WMI method BatteryeRawAnalytics() Returns a buffer usually containing 12 blocks of analytics data. Those blocks contain: -- block number starting with 0 (u8) + +- a block number starting with 0 (u8) - 31 bytes of unknown data .. note:: |