diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/00-INDEX | 3 | ||||
| -rw-r--r-- | Documentation/BUG-HUNTING | 17 | ||||
| -rw-r--r-- | Documentation/DocBook/kernel-api.tmpl | 2 | ||||
| -rw-r--r-- | Documentation/DocBook/kernel-locking.tmpl | 32 | ||||
| -rw-r--r-- | Documentation/acpi/method-tracing.txt | 26 | ||||
| -rw-r--r-- | Documentation/fb/deferred_io.txt | 6 | ||||
| -rw-r--r-- | Documentation/feature-removal-schedule.txt | 7 | ||||
| -rw-r--r-- | Documentation/filesystems/proc.txt | 8 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 9 | ||||
| -rw-r--r-- | Documentation/kprobes.txt | 81 | ||||
| -rw-r--r-- | Documentation/kref.txt | 20 | ||||
| -rw-r--r-- | Documentation/md.txt | 10 | ||||
| -rw-r--r-- | Documentation/power/swsusp.txt | 5 | ||||
| -rw-r--r-- | Documentation/rtc.txt | 42 | ||||
| -rw-r--r-- | Documentation/sysctl/fs.txt | 10 | ||||
| -rw-r--r-- | Documentation/thinkpad-acpi.txt | 116 | ||||
| -rw-r--r-- | Documentation/unaligned-memory-access.txt | 226 | ||||
| -rw-r--r-- | Documentation/w1/masters/00-INDEX | 2 | ||||
| -rw-r--r-- | Documentation/w1/masters/w1-gpio | 33 |
19 files changed, 575 insertions, 80 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 40ac7759c3bb..33f55917f23f 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -14,6 +14,7 @@ Following translations are available on the WWW: - this file. ABI/ - info on kernel <-> userspace ABI and relative interface stability. + BUG-HUNTING - brute force method of doing binary search of patches to find bug. Changes @@ -66,6 +67,8 @@ VGA-softcursor.txt - how to change your VGA cursor from a blinking underscore. accounting/ - documentation on accounting and taskstats. +acpi/ + - info on ACPI-specific hooks in the kernel. aoe/ - description of AoE (ATA over Ethernet) along with config examples. applying-patches.txt diff --git a/Documentation/BUG-HUNTING b/Documentation/BUG-HUNTING index 6c816751b868..65022a87bf17 100644 --- a/Documentation/BUG-HUNTING +++ b/Documentation/BUG-HUNTING @@ -214,6 +214,23 @@ And recompile the kernel with CONFIG_DEBUG_INFO enabled: gdb vmlinux (gdb) p vt_ioctl (gdb) l *(0x<address of vt_ioctl> + 0xda8) +or, as one command + (gdb) l *(vt_ioctl + 0xda8) + +If you have a call trace, such as :- +>Call Trace: +> [<ffffffff8802c8e9>] :jbd:log_wait_commit+0xa3/0xf5 +> [<ffffffff810482d9>] autoremove_wake_function+0x0/0x2e +> [<ffffffff8802770b>] :jbd:journal_stop+0x1be/0x1ee +> ... +this shows the problem in the :jbd: module. You can load that module in gdb +and list the relevant code. + gdb fs/jbd/jbd.ko + (gdb) p log_wait_commit + (gdb) l *(0x<address> + 0xa3) +or + (gdb) l *(log_wait_commit + 0xa3) + Another very useful option of the Kernel Hacking section in menuconfig is Debug memory allocations. This will help you see whether data has been diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 77436d735013..059aaf20951a 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -165,6 +165,7 @@ X!Ilib/string.c !Emm/vmalloc.c !Imm/page_alloc.c !Emm/mempool.c +!Emm/dmapool.c !Emm/page-writeback.c !Emm/truncate.c </sect1> @@ -371,7 +372,6 @@ X!Iinclude/linux/device.h !Edrivers/base/class.c !Edrivers/base/firmware_class.c !Edrivers/base/transport_class.c -!Edrivers/base/dmapool.c <!-- Cannot be included, because attribute_container_add_class_device_adapter and attribute_container_classdev_to_container diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index 01825ee7db64..2e9d6b41f034 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -717,7 +717,7 @@ used, and when it gets full, throws out the least used one. <para> For our first example, we assume that all operations are in user context (ie. from system calls), so we can sleep. This means we can -use a semaphore to protect the cache and all the objects within +use a mutex to protect the cache and all the objects within it. Here's the code: </para> @@ -725,7 +725,7 @@ it. Here's the code: #include <linux/list.h> #include <linux/slab.h> #include <linux/string.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #include <asm/errno.h> struct object @@ -737,7 +737,7 @@ struct object }; /* Protects the cache, cache_num, and the objects within it */ -static DECLARE_MUTEX(cache_lock); +static DEFINE_MUTEX(cache_lock); static LIST_HEAD(cache); static unsigned int cache_num = 0; #define MAX_CACHE_SIZE 10 @@ -789,17 +789,17 @@ int cache_add(int id, const char *name) obj->id = id; obj->popularity = 0; - down(&cache_lock); + mutex_lock(&cache_lock); __cache_add(obj); - up(&cache_lock); + mutex_unlock(&cache_lock); return 0; } void cache_delete(int id) { - down(&cache_lock); + mutex_lock(&cache_lock); __cache_delete(__cache_find(id)); - up(&cache_lock); + mutex_unlock(&cache_lock); } int cache_find(int id, char *name) @@ -807,13 +807,13 @@ int cache_find(int id, char *name) struct object *obj; int ret = -ENOENT; - down(&cache_lock); + mutex_lock(&cache_lock); obj = __cache_find(id); if (obj) { ret = 0; strcpy(name, obj->name); } - up(&cache_lock); + mutex_unlock(&cache_lock); return ret; } </programlisting> @@ -853,7 +853,7 @@ The change is shown below, in standard patch format: the int popularity; }; --static DECLARE_MUTEX(cache_lock); +-static DEFINE_MUTEX(cache_lock); +static spinlock_t cache_lock = SPIN_LOCK_UNLOCKED; static LIST_HEAD(cache); static unsigned int cache_num = 0; @@ -870,22 +870,22 @@ The change is shown below, in standard patch format: the obj->id = id; obj->popularity = 0; -- down(&cache_lock); +- mutex_lock(&cache_lock); + spin_lock_irqsave(&cache_lock, flags); __cache_add(obj); -- up(&cache_lock); +- mutex_unlock(&cache_lock); + spin_unlock_irqrestore(&cache_lock, flags); return 0; } void cache_delete(int id) { -- down(&cache_lock); +- mutex_lock(&cache_lock); + unsigned long flags; + + spin_lock_irqsave(&cache_lock, flags); __cache_delete(__cache_find(id)); -- up(&cache_lock); +- mutex_unlock(&cache_lock); + spin_unlock_irqrestore(&cache_lock, flags); } @@ -895,14 +895,14 @@ The change is shown below, in standard patch format: the int ret = -ENOENT; + unsigned long flags; -- down(&cache_lock); +- mutex_lock(&cache_lock); + spin_lock_irqsave(&cache_lock, flags); obj = __cache_find(id); if (obj) { ret = 0; strcpy(name, obj->name); } -- up(&cache_lock); +- mutex_unlock(&cache_lock); + spin_unlock_irqrestore(&cache_lock, flags); return ret; } diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt new file mode 100644 index 000000000000..f6efb1ea559a --- /dev/null +++ b/Documentation/acpi/method-tracing.txt @@ -0,0 +1,26 @@ +/sys/module/acpi/parameters/: + +trace_method_name + The AML method name that the user wants to trace + +trace_debug_layer + The temporary debug_layer used when tracing the method. + Using 0xffffffff by default if it is 0. + +trace_debug_level + The temporary debug_level used when tracing the method. + Using 0x00ffffff by default if it is 0. + +trace_state + The status of the tracing feature. + + "enabled" means this feature is enabled + and the AML method is traced every time it's executed. + + "1" means this feature is enabled and the AML method + will only be traced during the next execution. + + "disabled" means this feature is disabled. + Users can enable/disable this debug tracing feature by + "echo string > /sys/module/acpi/parameters/trace_state". + "string" should be one of "enable", "disable" and "1". diff --git a/Documentation/fb/deferred_io.txt b/Documentation/fb/deferred_io.txt index 63883a892120..748328370250 100644 --- a/Documentation/fb/deferred_io.txt +++ b/Documentation/fb/deferred_io.txt @@ -7,10 +7,10 @@ IO. The following example may be a useful explanation of how one such setup works: - userspace app like Xfbdev mmaps framebuffer -- deferred IO and driver sets up nopage and page_mkwrite handlers +- deferred IO and driver sets up fault and page_mkwrite handlers - userspace app tries to write to mmaped vaddress -- we get pagefault and reach nopage handler -- nopage handler finds and returns physical page +- we get pagefault and reach fault handler +- fault handler finds and returns physical page - we get page_mkwrite where we add this page to a list - schedule a workqueue task to be run after a delay - app continues writing to that page with no additional cost. this is diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index a7d9d179131a..68ce1300a360 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -208,13 +208,6 @@ Who: Randy Dunlap <randy.dunlap@oracle.com> --------------------------- -What: drivers depending on OSS_OBSOLETE -When: options in 2.6.23, code in 2.6.25 -Why: obsolete OSS drivers -Who: Adrian Bunk <bunk@stusta.de> - ---------------------------- - What: libata spindown skipping and warning When: Dec 2008 Why: Some halt(8) implementations synchronize caches for and spin diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index e2799b5fafea..5681e2fa1496 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1029,6 +1029,14 @@ nr_inodes Denotes the number of inodes the system has allocated. This number will grow and shrink dynamically. +nr_open +------- + +Denotes the maximum number of file-handles a process can +allocate. Default value is 1024*1024 (1048576) which should be +enough for most machines. Actual limit depends on RLIMIT_NOFILE +resource limit. + nr_free_inodes -------------- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9ad4e6fc56fd..8ea41b6e6a85 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -147,8 +147,10 @@ and is between 256 and 4096 characters. It is defined in the file default: 0 acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode } - See Documentation/power/video.txt + Format: { s3_bios, s3_mode, s3_beep } + See Documentation/power/video.txt for s3_bios and s3_mode. + s3_beep is for debugging; it makes the PC's speaker beep + as soon as the kernel's real-mode entry point is called. acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode Format: { level | edge | high | low } @@ -780,6 +782,9 @@ and is between 256 and 4096 characters. It is defined in the file loop use the MONITOR/MWAIT idle loop anyways. Performance should be the same as idle=poll. + ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem + Claim all unknown PCI IDE storage controllers. + ignore_loglevel [KNL] Ignore loglevel setting - this will print /all/ kernel messages to the console. Useful for debugging. diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 53a63890aea4..30c101761d0d 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -96,7 +96,9 @@ or in registers (e.g., for x86_64 or for an i386 fastcall function). The jprobe will work in either case, so long as the handler's prototype matches that of the probed function. -1.3 How Does a Return Probe Work? +1.3 Return Probes + +1.3.1 How Does a Return Probe Work? When you call register_kretprobe(), Kprobes establishes a kprobe at the entry to the function. When the probed function is called and this @@ -107,9 +109,9 @@ At boot time, Kprobes registers a kprobe at the trampoline. When the probed function executes its return instruction, control passes to the trampoline and that probe is hit. Kprobes' trampoline -handler calls the user-specified handler associated with the kretprobe, -then sets the saved instruction pointer to the saved return address, -and that's where execution resumes upon return from the trap. +handler calls the user-specified return handler associated with the +kretprobe, then sets the saved instruction pointer to the saved return +address, and that's where execution resumes upon return from the trap. While the probed function is executing, its return address is stored in an object of type kretprobe_instance. Before calling @@ -131,6 +133,30 @@ zero when the return probe is registered, and is incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the return probe. +1.3.2 Kretprobe entry-handler + +Kretprobes also provides an optional user-specified handler which runs +on function entry. This handler is specified by setting the entry_handler +field of the kretprobe struct. Whenever the kprobe placed by kretprobe at the +function entry is hit, the user-defined entry_handler, if any, is invoked. +If the entry_handler returns 0 (success) then a corresponding return handler +is guaranteed to be called upon function return. If the entry_handler +returns a non-zero error then Kprobes leaves the return address as is, and +the kretprobe has no further effect for that particular function instance. + +Multiple entry and return handler invocations are matched using the unique +kretprobe_instance object associated with them. Additionally, a user +may also specify per return-instance private data to be part of each +kretprobe_instance object. This is especially useful when sharing private +data between corresponding user entry and return handlers. The size of each +private data object can be specified at kretprobe registration time by +setting the data_size field of the kretprobe struct. This data can be +accessed through the data field of each kretprobe_instance object. + +In case probed function is entered but there is no kretprobe_instance +object available, then in addition to incrementing the nmissed count, +the user entry_handler invocation is also skipped. + 2. Architectures Supported Kprobes, jprobes, and return probes are implemented on the following @@ -274,6 +300,8 @@ of interest: - ret_addr: the return address - rp: points to the corresponding kretprobe object - task: points to the corresponding task struct +- data: points to per return-instance private data; see "Kretprobe + entry-handler" for details. The regs_return_value(regs) macro provides a simple abstraction to extract the return value from the appropriate register as defined by @@ -556,23 +584,52 @@ report failed calls to sys_open(). #include <linux/kernel.h> #include <linux/module.h> #include <linux/kprobes.h> +#include <linux/ktime.h> + +/* per-instance private data */ +struct my_data { + ktime_t entry_stamp; +}; static const char *probed_func = "sys_open"; -/* Return-probe handler: If the probed function fails, log the return value. */ -static int ret_handler(struct kretprobe_instance *ri, struct pt_regs *regs) +/* Timestamp function entry. */ +static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs) +{ + struct my_data *data; + + if(!current->mm) + return 1; /* skip kernel threads */ + + data = (struct my_data *)ri->data; + data->entry_stamp = ktime_get(); + return 0; +} + +/* If the probed function failed, log the return value and duration. + * Duration may turn out to be zero consistently, depending upon the + * granularity of time accounting on the platform. */ +static int return_handler(struct kretprobe_instance *ri, struct pt_regs *regs) { int retval = regs_return_value(regs); + struct my_data *data = (struct my_data *)ri->data; + s64 delta; + ktime_t now; + if (retval < 0) { - printk("%s returns %d\n", probed_func, retval); + now = ktime_get(); + delta = ktime_to_ns(ktime_sub(now, data->entry_stamp)); + printk("%s: return val = %d (duration = %lld ns)\n", + probed_func, retval, delta); } return 0; } static struct kretprobe my_kretprobe = { - .handler = ret_handler, - /* Probe up to 20 instances concurrently. */ - .maxactive = 20 + .handler = return_handler, + .entry_handler = entry_handler, + .data_size = sizeof(struct my_data), + .maxactive = 20, /* probe up to 20 instances concurrently */ }; static int __init kretprobe_init(void) @@ -584,7 +641,7 @@ static int __init kretprobe_init(void) printk("register_kretprobe failed, returned %d\n", ret); return -1; } - printk("Planted return probe at %p\n", my_kretprobe.kp.addr); + printk("Kretprobe active on %s\n", my_kretprobe.kp.symbol_name); return 0; } @@ -594,7 +651,7 @@ static void __exit kretprobe_exit(void) printk("kretprobe unregistered\n"); /* nmissed > 0 suggests that maxactive was set too low. */ printk("Missed probing %d instances of %s\n", - my_kretprobe.nmissed, probed_func); + my_kretprobe.nmissed, probed_func); } module_init(kretprobe_init) diff --git a/Documentation/kref.txt b/Documentation/kref.txt index f38b59d00c63..130b6e87aa7e 100644 --- a/Documentation/kref.txt +++ b/Documentation/kref.txt @@ -141,10 +141,10 @@ The last rule (rule 3) is the nastiest one to handle. Say, for instance, you have a list of items that are each kref-ed, and you wish to get the first one. You can't just pull the first item off the list and kref_get() it. That violates rule 3 because you are not already -holding a valid pointer. You must add locks or semaphores. For -instance: +holding a valid pointer. You must add a mutex (or some other lock). +For instance: -static DECLARE_MUTEX(sem); +static DEFINE_MUTEX(mutex); static LIST_HEAD(q); struct my_data { @@ -155,12 +155,12 @@ struct my_data static struct my_data *get_entry() { struct my_data *entry = NULL; - down(&sem); + mutex_lock(&mutex); if (!list_empty(&q)) { entry = container_of(q.next, struct my_q_entry, link); kref_get(&entry->refcount); } - up(&sem); + mutex_unlock(&mutex); return entry; } @@ -174,9 +174,9 @@ static void release_entry(struct kref *ref) static void put_entry(struct my_data *entry) { - down(&sem); + mutex_lock(&mutex); kref_put(&entry->refcount, release_entry); - up(&sem); + mutex_unlock(&mutex); } The kref_put() return value is useful if you do not want to hold the @@ -191,13 +191,13 @@ static void release_entry(struct kref *ref) static void put_entry(struct my_data *entry) { - down(&sem); + mutex_lock(&mutex); if (kref_put(&entry->refcount, release_entry)) { list_del(&entry->link); - up(&sem); + mutex_unlock(&mutex); kfree(entry); } else - up(&sem); + mutex_unlock(&mutex); } This is really more useful if you have to call other routines as part diff --git a/Documentation/md.txt b/Documentation/md.txt index 5818628207b5..396cdd982c26 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -416,6 +416,16 @@ also have sectors in total that could need to be processed. The two numbers are separated by a '/' thus effectively showing one value, a fraction of the process that is complete. + A 'select' on this attribute will return when resync completes, + when it reaches the current sync_max (below) and possibly at + other times. + + sync_max + This is a number of sectors at which point a resync/recovery + process will pause. When a resync is active, the value can + only ever be increased, never decreased. The value of 'max' + effectively disables the limit. + sync_speed This shows the current actual speed, in K/sec, of the current diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index aea7e9209667..9d60ab717a7b 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -386,6 +386,11 @@ before suspending; then remount them after resuming. There is a work-around for this problem. For more information, see Documentation/usb/persist.txt. +Q: Can I suspend-to-disk using a swap partition under LVM? + +A: No. You can suspend successfully, but you'll not be able to +resume. uswsusp should be able to work with LVM. See suspend.sf.net. + Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were compiled with the similar configuration files. Anyway I found that suspend to disk (and resume) is much slower on 2.6.16 compared to diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt index e20b19c1b60d..8deffcd68cb8 100644 --- a/Documentation/rtc.txt +++ b/Documentation/rtc.txt @@ -182,8 +182,8 @@ driver returns ENOIOCTLCMD. Some common examples: since the frequency is stored in the irq_freq member of the rtc_device structure. Your driver needs to initialize the irq_freq member during init. Make sure you check the requested frequency is in range of your - hardware in the irq_set_freq function. If you cannot actually change - the frequency, just return -ENOTTY. + hardware in the irq_set_freq function. If it isn't, return -EINVAL. If + you cannot actually change the frequency, do not define irq_set_freq. If all else fails, check out the rtc-test.c driver! @@ -268,8 +268,8 @@ int main(int argc, char **argv) /* This read will block */ retval = read(fd, &data, sizeof(unsigned long)); if (retval == -1) { - perror("read"); - exit(errno); + perror("read"); + exit(errno); } fprintf(stderr, " %d",i); fflush(stderr); @@ -326,11 +326,11 @@ test_READ: rtc_tm.tm_sec %= 60; rtc_tm.tm_min++; } - if (rtc_tm.tm_min == 60) { + if (rtc_tm.tm_min == 60) { rtc_tm.tm_min = 0; rtc_tm.tm_hour++; } - if (rtc_tm.tm_hour == 24) + if (rtc_tm.tm_hour == 24) rtc_tm.tm_hour = 0; retval = ioctl(fd, RTC_ALM_SET, &rtc_tm); @@ -407,8 +407,8 @@ test_PIE: "\n...Periodic IRQ rate is fixed\n"); goto done; } - perror("RTC_IRQP_SET ioctl"); - exit(errno); + perror("RTC_IRQP_SET ioctl"); + exit(errno); } fprintf(stderr, "\n%ldHz:\t", tmp); @@ -417,27 +417,27 @@ test_PIE: /* Enable periodic interrupts */ retval = ioctl(fd, RTC_PIE_ON, 0); if (retval == -1) { - perror("RTC_PIE_ON ioctl"); - exit(errno); + perror("RTC_PIE_ON ioctl"); + exit(errno); } for (i=1; i<21; i++) { - /* This blocks */ - retval = read(fd, &data, sizeof(unsigned long)); - if (retval == -1) { - perror("read"); - exit(errno); - } - fprintf(stderr, " %d",i); - fflush(stderr); - irqcount++; + /* This blocks */ + retval = read(fd, &data, sizeof(unsigned long)); + if (retval == -1) { + perror("read"); + exit(errno); + } + fprintf(stderr, " %d",i); + fflush(stderr); + irqcount++; } /* Disable periodic interrupts */ retval = ioctl(fd, RTC_PIE_OFF, 0); if (retval == -1) { - perror("RTC_PIE_OFF ioctl"); - exit(errno); + perror("RTC_PIE_OFF ioctl"); + exit(errno); } } diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index aa986a35e994..f99254327ae5 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -23,6 +23,7 @@ Currently, these files are in /proc/sys/fs: - inode-max - inode-nr - inode-state +- nr_open - overflowuid - overflowgid - suid_dumpable @@ -91,6 +92,15 @@ usage of file handles and you don't need to increase the maximum. ============================================================== +nr_open: + +This denotes the maximum number of file-handles a process can +allocate. Default value is 1024*1024 (1048576) which should be +enough for most machines. Actual limit depends on RLIMIT_NOFILE +resource limit. + +============================================================== + inode-max, inode-nr & inode-state: As with file handles, the kernel allocates the inode structures diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 10c041ca13c7..6c2477754a2a 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.17 - October 04th, 2007 + Version 0.19 + January 06th, 2008 Borislav Deianov <borislav@users.sf.net> Henrique de Moraes Holschuh <hmh@hmh.eng.br> @@ -215,6 +215,11 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file: ... any other 8-hex-digit mask ... echo reset > /proc/acpi/ibm/hotkey -- restore the original mask +The procfs interface does not support NVRAM polling control. So as to +maintain maximum bug-to-bug compatibility, it does not report any masks, +nor does it allow one to manipulate the hot key mask when the firmware +does not support masks at all, even if NVRAM polling is in use. + sysfs notes: hotkey_bios_enabled: @@ -231,17 +236,26 @@ sysfs notes: to this value. hotkey_enable: - Enables/disables the hot keys feature, and reports - current status of the hot keys feature. + Enables/disables the hot keys feature in the ACPI + firmware, and reports current status of the hot keys + feature. Has no effect on the NVRAM hot key polling + functionality. 0: disables the hot keys feature / feature disabled 1: enables the hot keys feature / feature enabled hotkey_mask: - bit mask to enable driver-handling and ACPI event - generation for each hot key (see above). Returns the - current status of the hot keys mask, and allows one to - modify it. + bit mask to enable driver-handling (and depending on + the firmware, ACPI event generation) for each hot key + (see above). Returns the current status of the hot keys + mask, and allows one to modify it. + + Note: when NVRAM polling is active, the firmware mask + will be different from the value returned by + hotkey_mask. The driver will retain enabled bits for + hotkeys that are under NVRAM polling even if the + firmware refuses them, and will not set these bits on + the firmware hot key mask. hotkey_all_mask: bit mask that should enable event reporting for all @@ -257,12 +271,48 @@ sysfs notes: handled by the firmware anyway. Echo it to hotkey_mask above, to use. + hotkey_source_mask: + bit mask that selects which hot keys will the driver + poll the NVRAM for. This is auto-detected by the driver + based on the capabilities reported by the ACPI firmware, + but it can be overridden at runtime. + + Hot keys whose bits are set in both hotkey_source_mask + and also on hotkey_mask are polled for in NVRAM. Only a + few hot keys are available through CMOS NVRAM polling. + + Warning: when in NVRAM mode, the volume up/down/mute + keys are synthesized according to changes in the mixer, + so you have to use volume up or volume down to unmute, + as per the ThinkPad volume mixer user interface. When + in ACPI event mode, volume up/down/mute are reported as + separate events, but this behaviour may be corrected in + future releases of this driver, in which case the + ThinkPad volume mixer user interface semanthics will be + enforced. + + hotkey_poll_freq: + frequency in Hz for hot key polling. It must be between + 0 and 25 Hz. Polling is only carried out when strictly + needed. + + Setting hotkey_poll_freq to zero disables polling, and + will cause hot key presses that require NVRAM polling + to never be reported. + + Setting hotkey_poll_freq too low will cause repeated + pressings of the same hot key to be misreported as a + single key press, or to not even be detected at all. + The recommended polling frequency is 10Hz. + hotkey_radio_sw: if the ThinkPad has a hardware radio switch, this attribute will read 0 if the switch is in the "radios disabled" postition, and 1 if the switch is in the "radios enabled" position. + This attribute has poll()/select() support. + hotkey_report_mode: Returns the state of the procfs ACPI event report mode filter for hot keys. If it is set to 1 (the default), @@ -277,6 +327,25 @@ sysfs notes: May return -EPERM (write access locked out by module parameter) or -EACCES (read-only). + wakeup_reason: + Set to 1 if the system is waking up because the user + requested a bay ejection. Set to 2 if the system is + waking up because the user requested the system to + undock. Set to zero for normal wake-ups or wake-ups + due to unknown reasons. + + This attribute has poll()/select() support. + + wakeup_hotunplug_complete: + Set to 1 if the system was waken up because of an + undock or bay ejection request, and that request + was sucessfully completed. At this point, it might + be useful to send the system back to sleep, at the + user's choice. Refer to HKEY events 0x4003 and + 0x3003, below. + + This attribute has poll()/select() support. + input layer notes: A Hot key is mapped to a single input layer EV_KEY event, possibly @@ -427,6 +496,23 @@ Non hot-key ACPI HKEY event map: The above events are not propagated by the driver, except for legacy compatibility purposes when hotkey_report_mode is set to 1. +0x2304 System is waking up from suspend to undock +0x2305 System is waking up from suspend to eject bay +0x2404 System is waking up from hibernation to undock +0x2405 System is waking up from hibernation to eject bay + +The above events are never propagated by the driver. + +0x3003 Bay ejection (see 0x2x05) complete, can sleep again +0x4003 Undocked (see 0x2x04), can sleep again +0x5009 Tablet swivel: switched to tablet mode +0x500A Tablet swivel: switched to normal mode +0x500B Tablet pen insterted into its storage bay +0x500C Tablet pen removed from its storage bay +0x5010 Brightness level changed (newer Lenovo BIOSes) + +The above events are propagated by the driver. + Compatibility notes: ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never @@ -1263,3 +1349,17 @@ Sysfs interface changelog: and the hwmon class for libsensors4 (lm-sensors 3) compatibility. Moved all hwmon attributes to this new platform device. + +0x020100: Marker for thinkpad-acpi with hot key NVRAM polling + support. If you must, use it to know you should not + start an userspace NVRAM poller (allows to detect when + NVRAM is compiled out by the user because it is + unneeded/undesired in the first place). +0x020101: Marker for thinkpad-acpi with hot key NVRAM polling + and proper hotkey_mask semanthics (version 8 of the + NVRAM polling patch). Some development snapshots of + 0.18 had an earlier version that did strange things + to hotkey_mask. + +0x020200: Add poll()/select() support to the following attributes: + hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt new file mode 100644 index 000000000000..6223eace3c09 --- /dev/null +++ b/Documentation/unaligned-memory-access.txt @@ -0,0 +1,226 @@ +UNALIGNED MEMORY ACCESSES +========================= + +Linux runs on a wide variety of architectures which have varying behaviour +when it comes to memory access. This document presents some details about +unaligned accesses, why you need to write code that doesn't cause them, +and how to write such code! + + +The definition of an unaligned access +===================================== + +Unaligned memory accesses occur when you try to read N bytes of data starting +from an address that is not evenly divisible by N (i.e. addr % N != 0). +For example, reading 4 bytes of data from address 0x10004 is fine, but +reading 4 bytes of data from address 0x10005 would be an unaligned memory +access. + +The above may seem a little vague, as memory access can happen in different +ways. The context here is at the machine code level: certain instructions read +or write a number of bytes to or from memory (e.g. movb, movw, movl in x86 +assembly). As will become clear, it is relatively easy to spot C statements +which will compile to multiple-byte memory access instructions, namely when +dealing with types such as u16, u32 and u64. + + +Natural alignment +================= + +The rule mentioned above forms what we refer to as natural alignment: +When accessing N bytes of memory, the base memory address must be evenly +divisible by N, i.e. addr % N == 0. + +When writing code, assume the target architecture has natural alignment +requirements. + +In reality, only a few architectures require natural alignment on all sizes +of memory access. However, we must consider ALL supported architectures; +writing code that satisfies natural alignment requirements is the easiest way +to achieve full portability. + + +Why unaligned access is bad +=========================== + +The effects of performing an unaligned memory access vary from architecture +to architecture. It would be easy to write a whole document on the differences +here; a summary of the common scenarios is presented below: + + - Some architectures are able to perform unaligned memory accesses + transparently, but there is usually a significant performance cost. + - Some architectures raise processor exceptions when unaligned accesses + happen. The exception handler is able to correct the unaligned access, + at significant cost to performance. + - Some architectures raise processor exceptions when unaligned accesses + happen, but the exceptions do not contain enough information for the + unaligned access to be corrected. + - Some architectures are not capable of unaligned memory access, but will + silently perform a different memory access to the one that was requested, + resulting a a subtle code bug that is hard to detect! + +It should be obvious from the above that if your code causes unaligned +memory accesses to happen, your code will not work correctly on certain +platforms and will cause performance problems on others. + + +Code that does not cause unaligned access +========================================= + +At first, the concepts above may seem a little hard to relate to actual +coding practice. After all, you don't have a great deal of control over +memory addresses of certain variables, etc. + +Fortunately things are not too complex, as in most cases, the compiler +ensures that things will work for you. For example, take the following +structure: + + struct foo { + u16 field1; + u32 field2; + u8 field3; + }; + +Let us assume that an instance of the above structure resides in memory +starting at address 0x10000. With a basic level of understanding, it would +not be unreasonable to expect that accessing field2 would cause an unaligned +access. You'd be expecting field2 to be located at offset 2 bytes into the +structure, i.e. address 0x10002, but that address is not evenly divisible +by 4 (remember, we're reading a 4 byte value here). + +Fortunately, the compiler understands the alignment constraints, so in the +above case it would insert 2 bytes of padding in between field1 and field2. +Therefore, for standard structure types you can always rely on the compiler +to pad structures so that accesses to fields are suitably aligned (assuming +you do not cast the field to a type of different length). + +Similarly, you can also rely on the compiler to align variables and function +parameters to a naturally aligned scheme, based on the size of the type of +the variable. + +At this point, it should be clear that accessing a single byte (u8 or char) +will never cause an unaligned access, because all memory addresses are evenly +divisible by one. + +On a related topic, with the above considerations in mind you may observe +that you could reorder the fields in the structure in order to place fields +where padding would otherwise be inserted, and hence reduce the overall +resident memory size of structure instances. The optimal layout of the +above example is: + + struct foo { + u32 field2; + u16 field1; + u8 field3; + }; + +For a natural alignment scheme, the compiler would only have to add a single +byte of padding at the end of the structure. This padding is added in order +to satisfy alignment constraints for arrays of these structures. + +Another point worth mentioning is the use of __attribute__((packed)) on a +structure type. This GCC-specific attribute tells the compiler never to +insert any padding within structures, useful when you want to use a C struct +to represent some data that comes in a fixed arrangement 'off the wire'. + +You might be inclined to believe that usage of this attribute can easily +lead to unaligned accesses when accessing fields that do not satisfy +architectural alignment requirements. However, again, the compiler is aware +of the alignment constraints and will generate extra instructions to perform +the memory access in a way that does not cause unaligned access. Of course, +the extra instructions obviously cause a loss in performance compared to the +non-packed case, so the packed attribute should only be used when avoiding +structure padding is of importance. + + +Code that causes unaligned access +================================= + +With the above in mind, let's move onto a real life example of a function +that can cause an unaligned memory access. The following function adapted +from include/linux/etherdevice.h is an optimized routine to compare two +ethernet MAC addresses for equality. + +unsigned int compare_ether_addr(const u8 *addr1, const u8 *addr2) +{ + const u16 *a = (const u16 *) addr1; + const u16 *b = (const u16 *) addr2; + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0; +} + +In the above function, the reference to a[0] causes 2 bytes (16 bits) to +be read from memory starting at address addr1. Think about what would happen +if addr1 was an odd address such as 0x10003. (Hint: it'd be an unaligned +access.) + +Despite the potential unaligned access problems with the above function, it +is included in the kernel anyway but is understood to only work on +16-bit-aligned addresses. It is up to the caller to ensure this alignment or +not use this function at all. This alignment-unsafe function is still useful +as it is a decent optimization for the cases when you can ensure alignment, +which is true almost all of the time in ethernet networking context. + + +Here is another example of some code that could cause unaligned accesses: + void myfunc(u8 *data, u32 value) + { + [...] + *((u32 *) data) = cpu_to_le32(value); + [...] + } + +This code will cause unaligned accesses every time the data parameter points +to an address that is not evenly divisible by 4. + +In summary, the 2 main scenarios where you may run into unaligned access +problems involve: + 1. Casting variables to types of different lengths + 2. Pointer arithmetic followed by access to at least 2 bytes of data + + +Avoiding unaligned accesses +=========================== + +The easiest way to avoid unaligned access is to use the get_unaligned() and +put_unaligned() macros provided by the <asm/unaligned.h> header file. + +Going back to an earlier example of code that potentially causes unaligned +access: + + void myfunc(u8 *data, u32 value) + { + [...] + *((u32 *) data) = cpu_to_le32(value); + [...] + } + +To avoid the unaligned memory access, you would rewrite it as follows: + + void myfunc(u8 *data, u32 value) + { + [...] + value = cpu_to_le32(value); + put_unaligned(value, (u32 *) data); + [...] + } + +The get_unaligned() macro works similarly. Assuming 'data' is a pointer to +memory and you wish to avoid unaligned access, its usage is as follows: + + u32 value = get_unaligned((u32 *) data); + +These macros work work for memory accesses of any length (not just 32 bits as +in the examples above). Be aware that when compared to standard access of +aligned memory, using these macros to access unaligned memory can be costly in +terms of performance. + +If use of such macros is not convenient, another option is to use memcpy(), +where the source or destination (or both) are of type u8* or unsigned char*. +Due to the byte-wise nature of this operation, unaligned accesses are avoided. + +-- +Author: Daniel Drake <dsd@gentoo.org> +With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt, +Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, +Uli Kunitz, Vadim Lobanov + diff --git a/Documentation/w1/masters/00-INDEX b/Documentation/w1/masters/00-INDEX index 752613c4cea2..7b0ceaaad7af 100644 --- a/Documentation/w1/masters/00-INDEX +++ b/Documentation/w1/masters/00-INDEX @@ -4,3 +4,5 @@ ds2482 - The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses. ds2490 - The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges. +w1-gpio + - GPIO 1-wire bus master driver. diff --git a/Documentation/w1/masters/w1-gpio b/Documentation/w1/masters/w1-gpio new file mode 100644 index 000000000000..af5d3b4aa851 --- /dev/null +++ b/Documentation/w1/masters/w1-gpio @@ -0,0 +1,33 @@ +Kernel driver w1-gpio +===================== + +Author: Ville Syrjala <syrjala@sci.fi> + + +Description +----------- + +GPIO 1-wire bus master driver. The driver uses the GPIO API to control the +wire and the GPIO pin can be specified using platform data. + + +Example (mach-at91) +------------------- + +#include <linux/w1-gpio.h> + +static struct w1_gpio_platform_data foo_w1_gpio_pdata = { + .pin = AT91_PIN_PB20, + .is_open_drain = 1, +}; + +static struct platform_device foo_w1_device = { + .name = "w1-gpio", + .id = -1, + .dev.platform_data = &foo_w1_gpio_pdata, +}; + +... + at91_set_GPIO_periph(foo_w1_gpio_pdata.pin, 1); + at91_set_multi_drive(foo_w1_gpio_pdata.pin, 1); + platform_device_register(&foo_w1_device); |