summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu11
-rw-r--r--Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x72
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-picolcd2
-rw-r--r--Documentation/ABI/testing/sysfs-firmware-acpi2
-rw-r--r--Documentation/DocBook/media/v4l/controls.xml2
-rw-r--r--Documentation/DocBook/media/v4l/dev-raw-vbi.xml2
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-selection.xml2
-rw-r--r--Documentation/IRQ-domain.txt12
-rw-r--r--Documentation/Makefile2
-rw-r--r--Documentation/RCU/RTFP.txt6
-rw-r--r--Documentation/adding-syscalls.txt2
-rw-r--r--Documentation/arm/SA1100/Assabet2
-rw-r--r--Documentation/block/00-INDEX4
-rw-r--r--Documentation/cgroup-v1/memory.txt14
-rw-r--r--Documentation/connector/.gitignore1
-rw-r--r--Documentation/connector/Makefile16
-rw-r--r--Documentation/connector/cn_test.c201
-rw-r--r--Documentation/connector/connector.txt8
-rw-r--r--Documentation/connector/ucon.c250
-rw-r--r--Documentation/devicetree/bindings/mfd/arizona.txt2
-rw-r--r--Documentation/driver-model/devres.txt3
-rw-r--r--Documentation/filesystems/cifs/README2
-rw-r--r--Documentation/filesystems/pohmelfs/design_notes.txt2
-rw-r--r--Documentation/filesystems/qnx6.txt2
-rw-r--r--Documentation/firmware_class/README2
-rw-r--r--Documentation/hwmon/abituguru2
-rw-r--r--Documentation/infiniband/ipoib.txt2
-rw-r--r--Documentation/ja_JP/HOWTO6
-rw-r--r--Documentation/kernel-docs.txt29
-rw-r--r--Documentation/ko_KR/HOWTO8
-rw-r--r--Documentation/laptops/toshiba_haps.txt2
-rw-r--r--Documentation/lzo.txt4
-rw-r--r--Documentation/mmc/00-INDEX2
-rw-r--r--Documentation/mmc/mmc-tools.txt34
-rw-r--r--Documentation/networking/can.txt2
-rw-r--r--Documentation/networking/filter.txt2
-rw-r--r--Documentation/pps/pps.txt2
-rw-r--r--Documentation/robust-futexes.txt6
-rw-r--r--Documentation/scsi/ChangeLog.megaraid_sas48
-rw-r--r--Documentation/scsi/bfa.txt2
-rw-r--r--Documentation/security/self-protection.txt261
-rw-r--r--Documentation/serial/driver54
-rw-r--r--Documentation/sysrq.txt2
-rw-r--r--Documentation/timers/hrtimers.txt6
-rw-r--r--Documentation/video4linux/README.cx882
-rw-r--r--Documentation/video4linux/bttv/Sound-FAQ2
-rw-r--r--Documentation/vm/hugetlbpage.txt6
-rw-r--r--Documentation/vm/pagemap.txt2
-rw-r--r--Documentation/x86/intel_mpx.txt4
-rw-r--r--Documentation/xillybus.txt2
-rw-r--r--Documentation/zh_CN/HOWTO4
-rw-r--r--Documentation/zh_CN/arm64/booting.txt20
52 files changed, 469 insertions, 601 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu
index f1e02a98bd9d..99fda67fce18 100644
--- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu
@@ -3,9 +3,10 @@ Date: Mai 2012
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split into general settings and
- button settings. buttons holds informations about button layout.
- When written, this file lets one write the respective profile
- buttons to the mouse. The data has to be 47 bytes long.
+ button settings. The buttons variable holds information about
+ button layout. When written, this file lets one write the
+ respective profile buttons to the mouse. The data has to be
+ 47 bytes long.
The mouse will reject invalid data.
Which profile to write is determined by the profile number
contained in the data.
@@ -26,8 +27,8 @@ Date: Mai 2012
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile is split into general settings and
- button settings. profile holds informations like resolution, sensitivity
- and light effects.
+ button settings. A profile holds information like resolution,
+ sensitivity and light effects.
When written, this file lets one write the respective profile
settings back to the mouse. The data has to be 43 bytes long.
The mouse will reject invalid data.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
index f893337570c1..ec27c6c9e737 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
@@ -4,7 +4,7 @@ Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org>
Description:
Provides access to the binary "24x7 catalog" provided by the
hypervisor on POWER7 and 8 systems. This catalog lists events
- avaliable from the powerpc "hv_24x7" pmu. Its format is
+ available from the powerpc "hv_24x7" pmu. Its format is
documented here:
https://raw.githubusercontent.com/jmesmon/catalog-24x7/master/hv-24x7-catalog.h
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
index 08579e7e1e89..98fd81ad76a1 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-picolcd
+++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -39,5 +39,5 @@ Description: Make it possible to adjust defio refresh rate.
Note: As device can barely do 2 complete refreshes a second
it only makes sense to adjust this value if only one or two
tiles get changed and it's not appropriate to expect the application
- to flush it's tiny changes explicitely at higher than default rate.
+ to flush its tiny changes explicitly at higher than default rate.
diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
index b4436cca97a8..c7fc72d4495c 100644
--- a/Documentation/ABI/testing/sysfs-firmware-acpi
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -169,7 +169,7 @@ Description:
to enable/disable/clear ACPI interrupts in user space, which can be
used to debug some ACPI interrupt storm issues.
- Note that only writting to VALID GPE/Fixed Event is allowed,
+ Note that only writing to VALID GPE/Fixed Event is allowed,
i.e. user can only change the status of runtime GPE and
Fixed Event with event handler installed.
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 81efa883f67d..e2e5484d2d9b 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -2841,7 +2841,7 @@ for a GOP and keep it below or equal the set bitrate target. Otherwise the rate
overall average bitrate for the stream and keeps it below or equal to the set bitrate. In the first case
the average bitrate for the whole stream will be smaller then the set bitrate. This is caused because the
average is calculated for smaller number of frames, on the other hand enabling this setting will ensure that
-the stream will meet tight bandwidth contraints. Applicable to encoders.
+the stream will meet tight bandwidth constraints. Applicable to encoders.
</entry>
</row>
<row><entry></entry></row>
diff --git a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
index f4b61b6ce3c2..78599bbd58f7 100644
--- a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
+++ b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
@@ -85,7 +85,7 @@ initialize all fields of the &v4l2-vbi-format;
results of <constant>VIDIOC_G_FMT</constant>, and call the
&VIDIOC-S-FMT; ioctl with a pointer to this structure. Drivers return
an &EINVAL; only when the given parameters are ambiguous, otherwise
-they modify the parameters according to the hardware capabilites and
+they modify the parameters according to the hardware capabilities and
return the actual parameters. When the driver allocates resources at
this point, it may return an &EBUSY; to indicate the returned
parameters are valid but the required resources are currently not
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
index 9523bc5650f9..997f4e96f297 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
@@ -216,7 +216,7 @@ or the <structfield>flags</structfield> argument is not valid.</para>
<term><errorcode>ERANGE</errorcode></term>
<listitem>
<para>It is not possible to adjust &v4l2-rect; <structfield>
-r</structfield> rectangle to satisfy all contraints given in the
+r</structfield> rectangle to satisfy all constraints given in the
<structfield>flags</structfield> argument.</para>
</listitem>
</varlistentry>
diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt
index 8d990bde8693..82001a25a14b 100644
--- a/Documentation/IRQ-domain.txt
+++ b/Documentation/IRQ-domain.txt
@@ -70,6 +70,7 @@ of the reverse map types are described below:
==== Linear ====
irq_domain_add_linear()
+irq_domain_create_linear()
The linear reverse map maintains a fixed size table indexed by the
hwirq number. When a hwirq is mapped, an irq_desc is allocated for
@@ -81,10 +82,16 @@ map are fixed time lookup for IRQ numbers, and irq_descs are only
allocated for in-use IRQs. The disadvantage is that the table must be
as large as the largest possible hwirq number.
+irq_domain_add_linear() and irq_domain_create_linear() are functionally
+equivalent, except for the first argument is different - the former
+accepts an Open Firmware specific 'struct device_node', while the latter
+accepts a more general abstraction 'struct fwnode_handle'.
+
The majority of drivers should use the linear map.
==== Tree ====
irq_domain_add_tree()
+irq_domain_create_tree()
The irq_domain maintains a radix tree map from hwirq numbers to Linux
IRQs. When an hwirq is mapped, an irq_desc is allocated and the
@@ -95,6 +102,11 @@ since it doesn't need to allocate a table as large as the largest
hwirq number. The disadvantage is that hwirq to IRQ number lookup is
dependent on how many entries are in the table.
+irq_domain_add_tree() and irq_domain_create_tree() are functionally
+equivalent, except for the first argument is different - the former
+accepts an Open Firmware specific 'struct device_node', while the latter
+accepts a more general abstraction 'struct fwnode_handle'.
+
Very few drivers should need this mapping.
==== No Map ===-
diff --git a/Documentation/Makefile b/Documentation/Makefile
index f3b04d22957c..de955e151af8 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,3 +1,3 @@
-subdir-y := accounting auxdisplay blackfin connector \
+subdir-y := accounting auxdisplay blackfin \
filesystems filesystems ia64 laptops mic misc-devices \
networking pcmcia prctl ptp timers vDSO watchdog
diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
index 370ca006db7a..9bccf16736f7 100644
--- a/Documentation/RCU/RTFP.txt
+++ b/Documentation/RCU/RTFP.txt
@@ -176,13 +176,13 @@ a history of how Linux changed RCU more than RCU changed Linux
which Mathieu Desnoyers is now maintaining [MathieuDesnoyers2009URCU]
[MathieuDesnoyersPhD]. TINY_RCU [PaulEMcKenney2009BloatWatchRCU] made
its appearance, as did expedited RCU [PaulEMcKenney2009expeditedRCU].
-The problem of resizeable RCU-protected hash tables may now be on a path
+The problem of resizable RCU-protected hash tables may now be on a path
to a solution [JoshTriplett2009RPHash]. A few academic researchers are now
using RCU to solve their parallel problems [HariKannan2009DynamicAnalysisRCU].
2010 produced a simpler preemptible-RCU implementation
based on TREE_RCU [PaulEMcKenney2010SimpleOptRCU], lockdep-RCU
-[PaulEMcKenney2010LockdepRCU], another resizeable RCU-protected hash
+[PaulEMcKenney2010LockdepRCU], another resizable RCU-protected hash
table [HerbertXu2010RCUResizeHash] (this one consuming more memory,
but allowing arbitrary changes in hash function, as required for DoS
avoidance in the networking code), realization of the 2009 RCU-protected
@@ -193,7 +193,7 @@ the RCU API [PaulEMcKenney2010RCUAPI].
[LinusTorvalds2011Linux2:6:38:rc1:NPigginVFS], an RCU-protected red-black
tree using software transactional memory to protect concurrent updates
(strange, but true!) [PhilHoward2011RCUTMRBTree], yet another variant of
-RCU-protected resizeable hash tables [Triplett:2011:RPHash], the 3.0 RCU
+RCU-protected resizable hash tables [Triplett:2011:RPHash], the 3.0 RCU
trainwreck [PaulEMcKenney2011RCU3.0trainwreck], and Neil Brown's "Meet the
Lockers" LWN article [NeilBrown2011MeetTheLockers]. Some academic
work looked at debugging uses of RCU [Seyster:2011:RFA:2075416.2075425].
diff --git a/Documentation/adding-syscalls.txt b/Documentation/adding-syscalls.txt
index cc2d4ac4f404..bbb31e091b28 100644
--- a/Documentation/adding-syscalls.txt
+++ b/Documentation/adding-syscalls.txt
@@ -136,7 +136,7 @@ an fxyzzy(3) operation for free:
- xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...)
(For more details on the rationale of the *at() calls, see the openat(2) man
-page; for an example of AT_EMPTY_PATH, see the statat(2) man page.)
+page; for an example of AT_EMPTY_PATH, see the fstatat(2) man page.)
If your new xyzzy(2) system call involves a parameter describing an offset
within a file, make its type loff_t so that 64-bit offsets can be supported
diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet
index 08b885d35674..e08a6739e72c 100644
--- a/Documentation/arm/SA1100/Assabet
+++ b/Documentation/arm/SA1100/Assabet
@@ -214,7 +214,7 @@ RedBoot scripting
-----------------
All the commands above aren't so useful if they have to be typed in every
-time the Assabet is rebooted. Therefore it's possible to automatize the boot
+time the Assabet is rebooted. Therefore it's possible to automate the boot
process using RedBoot's scripting capability.
For example, I use this to boot Linux with both the kernel and the ramdisk
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX
index e840b47613f7..e55103ace382 100644
--- a/Documentation/block/00-INDEX
+++ b/Documentation/block/00-INDEX
@@ -2,6 +2,8 @@
- This file
biodoc.txt
- Notes on the Generic Block Layer Rewrite in Linux 2.5
+biovecs.txt
+ - Immutable biovecs and biovec iterators
capability.txt
- Generic Block Device Capability (/sys/block/<device>/capability)
cfq-iosched.txt
@@ -14,6 +16,8 @@ deadline-iosched.txt
- Deadline IO scheduler tunables
ioprio.txt
- Block io priorities (in CFQ scheduler)
+pr.txt
+ - Block layer support for Persistent Reservations
null_blk.txt
- Null block for block-layer benchmarking.
queue-sysfs.txt
diff --git a/Documentation/cgroup-v1/memory.txt b/Documentation/cgroup-v1/memory.txt
index ff71e16cc752..b14abf217239 100644
--- a/Documentation/cgroup-v1/memory.txt
+++ b/Documentation/cgroup-v1/memory.txt
@@ -280,17 +280,9 @@ the amount of kernel memory used by the system. Kernel memory is fundamentally
different than user memory, since it can't be swapped out, which makes it
possible to DoS the system by consuming too much of this precious resource.
-Kernel memory won't be accounted at all until limit on a group is set. This
-allows for existing setups to continue working without disruption. The limit
-cannot be set if the cgroup have children, or if there are already tasks in the
-cgroup. Attempting to set the limit under those conditions will return -EBUSY.
-When use_hierarchy == 1 and a group is accounted, its children will
-automatically be accounted regardless of their limit value.
-
-After a group is first limited, it will be kept being accounted until it
-is removed. The memory limitation itself, can of course be removed by writing
--1 to memory.kmem.limit_in_bytes. In this case, kmem will be accounted, but not
-limited.
+Kernel memory accounting is enabled for all memory cgroups by default. But
+it can be disabled system-wide by passing cgroup.memory=nokmem to the kernel
+at boot time. In this case, kernel memory will not be accounted at all.
Kernel memory limits are not imposed for the root cgroup. Usage for the root
cgroup may or may not be accounted. The memory used is accumulated into
diff --git a/Documentation/connector/.gitignore b/Documentation/connector/.gitignore
deleted file mode 100644
index d2b9c32accd4..000000000000
--- a/Documentation/connector/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-ucon
diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile
deleted file mode 100644
index d98e4df98e24..000000000000
--- a/Documentation/connector/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-ifneq ($(CONFIG_CONNECTOR),)
-obj-m += cn_test.o
-endif
-
-# List of programs to build
-hostprogs-y := ucon
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
-
-all: modules
-
-modules clean:
- $(MAKE) -C ../.. SUBDIRS=$(PWD) $@
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
deleted file mode 100644
index d12cc944b696..000000000000
--- a/Documentation/connector/cn_test.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * cn_test.c
- *
- * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define pr_fmt(fmt) "cn_test: " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/timer.h>
-
-#include <linux/connector.h>
-
-static struct cb_id cn_test_id = { CN_NETLINK_USERS + 3, 0x456 };
-static char cn_test_name[] = "cn_test";
-static struct sock *nls;
-static struct timer_list cn_test_timer;
-
-static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
-{
- pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
- __func__, jiffies, msg->id.idx, msg->id.val,
- msg->seq, msg->ack, msg->len,
- msg->len ? (char *)msg->data : "");
-}
-
-/*
- * Do not remove this function even if no one is using it as
- * this is an example of how to get notifications about new
- * connector user registration
- */
-#if 0
-static int cn_test_want_notify(void)
-{
- struct cn_ctl_msg *ctl;
- struct cn_notify_req *req;
- struct cn_msg *msg = NULL;
- int size, size0;
- struct sk_buff *skb;
- struct nlmsghdr *nlh;
- u32 group = 1;
-
- size0 = sizeof(*msg) + sizeof(*ctl) + 3 * sizeof(*req);
-
- size = NLMSG_SPACE(size0);
-
- skb = alloc_skb(size, GFP_ATOMIC);
- if (!skb) {
- pr_err("failed to allocate new skb with size=%u\n", size);
- return -ENOMEM;
- }
-
- nlh = nlmsg_put(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh), 0);
- if (!nlh) {
- kfree_skb(skb);
- return -EMSGSIZE;
- }
-
- msg = nlmsg_data(nlh);
-
- memset(msg, 0, size0);
-
- msg->id.idx = -1;
- msg->id.val = -1;
- msg->seq = 0x123;
- msg->ack = 0x345;
- msg->len = size0 - sizeof(*msg);
-
- ctl = (struct cn_ctl_msg *)(msg + 1);
-
- ctl->idx_notify_num = 1;
- ctl->val_notify_num = 2;
- ctl->group = group;
- ctl->len = msg->len - sizeof(*ctl);
-
- req = (struct cn_notify_req *)(ctl + 1);
-
- /*
- * Idx.
- */
- req->first = cn_test_id.idx;
- req->range = 10;
-
- /*
- * Val 0.
- */
- req++;
- req->first = cn_test_id.val;
- req->range = 10;
-
- /*
- * Val 1.
- */
- req++;
- req->first = cn_test_id.val + 20;
- req->range = 10;
-
- NETLINK_CB(skb).dst_group = ctl->group;
- //netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC);
- netlink_unicast(nls, skb, 0, 0);
-
- pr_info("request was sent: group=0x%x\n", ctl->group);
-
- return 0;
-}
-#endif
-
-static u32 cn_test_timer_counter;
-static void cn_test_timer_func(unsigned long __data)
-{
- struct cn_msg *m;
- char data[32];
-
- pr_debug("%s: timer fired with data %lu\n", __func__, __data);
-
- m = kzalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC);
- if (m) {
-
- memcpy(&m->id, &cn_test_id, sizeof(m->id));
- m->seq = cn_test_timer_counter;
- m->len = sizeof(data);
-
- m->len =
- scnprintf(data, sizeof(data), "counter = %u",
- cn_test_timer_counter) + 1;
-
- memcpy(m + 1, data, m->len);
-
- cn_netlink_send(m, 0, 0, GFP_ATOMIC);
- kfree(m);
- }
-
- cn_test_timer_counter++;
-
- mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
-}
-
-static int cn_test_init(void)
-{
- int err;
-
- err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback);
- if (err)
- goto err_out;
- cn_test_id.val++;
- err = cn_add_callback(&cn_test_id, cn_test_name, cn_test_callback);
- if (err) {
- cn_del_callback(&cn_test_id);
- goto err_out;
- }
-
- setup_timer(&cn_test_timer, cn_test_timer_func, 0);
- mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
-
- pr_info("initialized with id={%u.%u}\n",
- cn_test_id.idx, cn_test_id.val);
-
- return 0;
-
- err_out:
- if (nls && nls->sk_socket)
- sock_release(nls->sk_socket);
-
- return err;
-}
-
-static void cn_test_fini(void)
-{
- del_timer_sync(&cn_test_timer);
- cn_del_callback(&cn_test_id);
- cn_test_id.val--;
- cn_del_callback(&cn_test_id);
- if (nls && nls->sk_socket)
- sock_release(nls->sk_socket);
-}
-
-module_init(cn_test_init);
-module_exit(cn_test_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
-MODULE_DESCRIPTION("Connector's test module");
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
index f6215f95149b..ab7ca897fab7 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.txt
@@ -186,3 +186,11 @@ only cn_test.c test module used it.
Some work in netlink area is still being done, so things can be changed in
2.6.15 timeframe, if it will happen, documentation will be updated for that
kernel.
+
+/*****************************************/
+Code samples
+/*****************************************/
+
+Sample code for a connector test module and user space can be found
+in samples/connector/. To build this code, enable CONFIG_CONNECTOR
+and CONFIG_SAMPLES.
diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c
deleted file mode 100644
index 8a4da64e02a8..000000000000
--- a/Documentation/connector/ucon.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * ucon.c
- *
- * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <asm/types.h>
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/poll.h>
-
-#include <linux/netlink.h>
-#include <linux/rtnetlink.h>
-
-#include <arpa/inet.h>
-
-#include <stdbool.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-#include <time.h>
-#include <getopt.h>
-
-#include <linux/connector.h>
-
-#define DEBUG
-#define NETLINK_CONNECTOR 11
-
-/* Hopefully your userspace connector.h matches this kernel */
-#define CN_TEST_IDX CN_NETLINK_USERS + 3
-#define CN_TEST_VAL 0x456
-
-#ifdef DEBUG
-#define ulog(f, a...) fprintf(stdout, f, ##a)
-#else
-#define ulog(f, a...) do {} while (0)
-#endif
-
-static int need_exit;
-static __u32 seq;
-
-static int netlink_send(int s, struct cn_msg *msg)
-{
- struct nlmsghdr *nlh;
- unsigned int size;
- int err;
- char buf[128];
- struct cn_msg *m;
-
- size = NLMSG_SPACE(sizeof(struct cn_msg) + msg->len);
-
- nlh = (struct nlmsghdr *)buf;
- nlh->nlmsg_seq = seq++;
- nlh->nlmsg_pid = getpid();
- nlh->nlmsg_type = NLMSG_DONE;
- nlh->nlmsg_len = size;
- nlh->nlmsg_flags = 0;
-
- m = NLMSG_DATA(nlh);
-#if 0
- ulog("%s: [%08x.%08x] len=%u, seq=%u, ack=%u.\n",
- __func__, msg->id.idx, msg->id.val, msg->len, msg->seq, msg->ack);
-#endif
- memcpy(m, msg, sizeof(*m) + msg->len);
-
- err = send(s, nlh, size, 0);
- if (err == -1)
- ulog("Failed to send: %s [%d].\n",
- strerror(errno), errno);
-
- return err;
-}
-
-static void usage(void)
-{
- printf(
- "Usage: ucon [options] [output file]\n"
- "\n"
- "\t-h\tthis help screen\n"
- "\t-s\tsend buffers to the test module\n"
- "\n"
- "The default behavior of ucon is to subscribe to the test module\n"
- "and wait for state messages. Any ones received are dumped to the\n"
- "specified output file (or stdout). The test module is assumed to\n"
- "have an id of {%u.%u}\n"
- "\n"
- "If you get no output, then verify the cn_test module id matches\n"
- "the expected id above.\n"
- , CN_TEST_IDX, CN_TEST_VAL
- );
-}
-
-int main(int argc, char *argv[])
-{
- int s;
- char buf[1024];
- int len;
- struct nlmsghdr *reply;
- struct sockaddr_nl l_local;
- struct cn_msg *data;
- FILE *out;
- time_t tm;
- struct pollfd pfd;
- bool send_msgs = false;
-
- while ((s = getopt(argc, argv, "hs")) != -1) {
- switch (s) {
- case 's':
- send_msgs = true;
- break;
-
- case 'h':
- usage();
- return 0;
-
- default:
- /* getopt() outputs an error for us */
- usage();
- return 1;
- }
- }
-
- if (argc != optind) {
- out = fopen(argv[optind], "a+");
- if (!out) {
- ulog("Unable to open %s for writing: %s\n",
- argv[1], strerror(errno));
- out = stdout;
- }
- } else
- out = stdout;
-
- memset(buf, 0, sizeof(buf));
-
- s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
- if (s == -1) {
- perror("socket");
- return -1;
- }
-
- l_local.nl_family = AF_NETLINK;
- l_local.nl_groups = -1; /* bitmask of requested groups */
- l_local.nl_pid = 0;
-
- ulog("subscribing to %u.%u\n", CN_TEST_IDX, CN_TEST_VAL);
-
- if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
- perror("bind");
- close(s);
- return -1;
- }
-
-#if 0
- {
- int on = 0x57; /* Additional group number */
- setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on));
- }
-#endif
- if (send_msgs) {
- int i, j;
-
- memset(buf, 0, sizeof(buf));
-
- data = (struct cn_msg *)buf;
-
- data->id.idx = CN_TEST_IDX;
- data->id.val = CN_TEST_VAL;
- data->seq = seq++;
- data->ack = 0;
- data->len = 0;
-
- for (j=0; j<10; ++j) {
- for (i=0; i<1000; ++i) {
- len = netlink_send(s, data);
- }
-
- ulog("%d messages have been sent to %08x.%08x.\n", i, data->id.idx, data->id.val);
- }
-
- return 0;
- }
-
-
- pfd.fd = s;
-
- while (!need_exit) {
- pfd.events = POLLIN;
- pfd.revents = 0;
- switch (poll(&pfd, 1, -1)) {
- case 0:
- need_exit = 1;
- break;
- case -1:
- if (errno != EINTR) {
- need_exit = 1;
- break;
- }
- continue;
- }
- if (need_exit)
- break;
-
- memset(buf, 0, sizeof(buf));
- len = recv(s, buf, sizeof(buf), 0);
- if (len == -1) {
- perror("recv buf");
- close(s);
- return -1;
- }
- reply = (struct nlmsghdr *)buf;
-
- switch (reply->nlmsg_type) {
- case NLMSG_ERROR:
- fprintf(out, "Error message received.\n");
- fflush(out);
- break;
- case NLMSG_DONE:
- data = (struct cn_msg *)NLMSG_DATA(reply);
-
- time(&tm);
- fprintf(out, "%.24s : [%x.%x] [%08u.%08u].\n",
- ctime(&tm), data->id.idx, data->id.val, data->seq, data->ack);
- fflush(out);
- break;
- default:
- break;
- }
- }
-
- close(s);
- return 0;
-}
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 9b30011ecabe..a6e2ea41160c 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -1,6 +1,6 @@
Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
-These devices are audio SoCs with extensive digital capabilites and a range
+These devices are audio SoCs with extensive digital capabilities and a range
of analogue I/O.
Required properties:
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index e89f7b51f243..7281fb4b4316 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -268,6 +268,9 @@ IIO
devm_iio_trigger_alloc()
devm_iio_trigger_free()
+INPUT
+ devm_input_allocate_device()
+
IO region
devm_release_mem_region()
devm_release_region()
diff --git a/Documentation/filesystems/cifs/README b/Documentation/filesystems/cifs/README
index 2d5622f60e11..a54788405429 100644
--- a/Documentation/filesystems/cifs/README
+++ b/Documentation/filesystems/cifs/README
@@ -272,7 +272,7 @@ A partial list of the supported mount options follows:
same domain (e.g. running winbind or nss_ldap) and
the server supports the Unix Extensions then the uid
and gid can be retrieved from the server (and uid
- and gid would not have to be specifed on the mount.
+ and gid would not have to be specified on the mount.
For servers which do not support the CIFS Unix
extensions, the default uid (and gid) returned on lookup
of existing files will be the uid (gid) of the person
diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
index 8aef91335701..106d17fbb05f 100644
--- a/Documentation/filesystems/pohmelfs/design_notes.txt
+++ b/Documentation/filesystems/pohmelfs/design_notes.txt
@@ -29,7 +29,7 @@ Main features of this FS include:
* Read request (data read, directory listing, lookup requests) balancing between multiple servers.
* Write requests are replicated to multiple servers and completed only when all of them are acked.
* Ability to add and/or remove servers from the working set at run-time.
- * Strong authentification and possible data encryption in network channel.
+ * Strong authentication and possible data encryption in network channel.
* Extended attributes support.
POHMELFS is based on transactions, which are potentially long-standing objects that live
diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.txt
index 408679789136..4f3d6a882bdc 100644
--- a/Documentation/filesystems/qnx6.txt
+++ b/Documentation/filesystems/qnx6.txt
@@ -16,7 +16,7 @@ qnx6fs shares many properties with traditional Unix filesystems. It has the
concepts of blocks, inodes and directories.
On QNX it is possible to create little endian and big endian qnx6 filesystems.
This feature makes it possible to create and use a different endianness fs
-for the target (QNX is used on quite a range of embedded systems) plattform
+for the target (QNX is used on quite a range of embedded systems) platform
running on a different endianness.
The Linux driver handles endianness transparently. (LE and BE)
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index 71f86859d7d8..cafdca8b3b15 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -20,7 +20,7 @@
1), kernel(driver):
- calls request_firmware(&fw_entry, $FIRMWARE, device)
- - kernel searchs the fimware image with name $FIRMWARE directly
+ - kernel searches the firmware image with name $FIRMWARE directly
in the below search path of root filesystem:
User customized search path by module parameter 'path'[1]
"/lib/firmware/updates/" UTS_RELEASE,
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 915f32063a26..f1d4fe4c366c 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -25,7 +25,7 @@ Supported chips:
1) For revisions 2 and 3 uGuru's the driver can autodetect the
sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
this doesnot always work. For these uGuru's the autodection can
- be overriden with the bank1_types module param. For all 3 known
+ be overridden with the bank1_types module param. For all 3 known
revison 1 motherboards the correct use of this param is:
bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
You may also need to specify the fan_sensors option for these boards
diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt
index f2cfe265e836..47c1dd9818f2 100644
--- a/Documentation/infiniband/ipoib.txt
+++ b/Documentation/infiniband/ipoib.txt
@@ -25,7 +25,7 @@ Partitions and P_Keys
main interface for a subinterface is in "parent."
Child interface create/delete can also be done using IPoIB's
- rtnl_link_ops, where childs created using either way behave the same.
+ rtnl_link_ops, where children created using either way behave the same.
Datagram vs Connected modes
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 52ef02b33da9..581c14bdd7be 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -290,12 +290,6 @@ Linux カーネルの開発プロセスは現在幾つかの異なるメイン
- このプロセスはカーネルが 「準備ができた」と考えられるまで継続しま
す。このプロセスはだいたい 6週間継続します。
- - 各リリースでの既知の後戻り問題(regression: このリリースの中で新規
- に作り込まれた問題を指す) はその都度 Linux-kernel メーリングリスト
- に投稿されます。ゴールとしては、カーネルが 「準備ができた」と宣言
- する前にこのリストの長さをゼロに減らすことですが、現実には、数個の
- 後戻り問題がリリース時にたびたび残ってしまいます。
-
Andrew Morton が Linux-kernel メーリングリストにカーネルリリースについ
て書いたことをここで言っておくことは価値があります-
「カーネルがいつリリースされるかは誰も知りません。なぜなら、これは現
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index fe217c1c2f7f..1dafc52167b0 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -194,15 +194,15 @@
simple---most of the complexity (other than talking to the
hardware) involves managing network packets in memory".
- * Title: "Writing Linux Device Drivers"
+ * Title: "Linux Kernel Hackers' Guide"
Author: Michael K. Johnson.
- URL: http://users.evitech.fi/~tk/rtos/writing_linux_device_d.html
- Keywords: files, VFS, file operations, kernel interface, character
- vs block devices, I/O access, hardware interrupts, DMA, access to
- user memory, memory allocation, timers.
- Description: Introductory 50-minutes (sic) tutorial on writing
- device drivers. 12 pages written by the same author of the "Kernel
- Hackers' Guide" which give a very good overview of the topic.
+ URL: http://www.tldp.org/LDP/khg/HyperNews/get/khg.html
+ Keywords: device drivers, files, VFS, kernel interface, character vs
+ block devices, hardware interrupts, scsi, DMA, access to user memory,
+ memory allocation, timers.
+ Description: A guide designed to help you get up to speed on the
+ concepts that are not intuitevly obvious, and to document the internal
+ structures of Linux.
* Title: "The Venus kernel interface"
Author: Peter J. Braam.
@@ -250,7 +250,7 @@
* Title: "Analysis of the Ext2fs structure"
Author: Louis-Dominique Dubeau.
- URL: http://www.nondot.org/sabre/os/files/FileSystems/ext2fs/
+ URL: http://teaching.csse.uwa.edu.au/units/CITS2002/fs-ext2/
Keywords: ext2, filesystem, ext2fs.
Description: Description of ext2's blocks, directories, inodes,
bitmaps, invariants...
@@ -266,14 +266,14 @@
* Title: "Kernel API changes from 2.0 to 2.2"
Author: Richard Gooch.
- URL:
- http://www.linuxhq.com/guides/LKMPG/node28.html
+ URL: http://www.safe-mbox.com/~rgooch/linux/docs/porting-to-2.2.html
Keywords: 2.2, changes.
Description: Kernel functions/structures/variables which changed
from 2.0.x to 2.2.x.
* Title: "Kernel API changes from 2.2 to 2.4"
Author: Richard Gooch.
+ URL: http://www.safe-mbox.com/~rgooch/linux/docs/porting-to-2.4.html
Keywords: 2.4, changes.
Description: Kernel functions/structures/variables which changed
from 2.2.x to 2.4.x.
@@ -609,6 +609,13 @@
Pages: 432.
ISBN: 0-201-63338-8
+ * Title: "Linux Kernel Development, 3rd Edition"
+ Author: Robert Love
+ Publisher: Addison-Wesley.
+ Date: July, 2010
+ Pages: 440
+ ISBN: 978-0672329463
+
MISCELLANEOUS:
* Name: linux/Documentation
diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO
index 5a81b394b3b5..9a3e65924d54 100644
--- a/Documentation/ko_KR/HOWTO
+++ b/Documentation/ko_KR/HOWTO
@@ -236,9 +236,9 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H
- 새로운 커널이 배포되자마자 2주의 시간이 주어진다. 이 기간동은
메인테이너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은
몇 주 동안 -next 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데
- 선호되는 방법은 git(커널의 소스 관리 툴, 더 많은 정보들은 http://git.or.cz/
- 에서 참조할 수 있다)를 사용하는 것이지만 순수한 패치파일의 형식으로 보내는
- 것도 무관하다.
+ 선호되는 방법은 git(커널의 소스 관리 툴, 더 많은 정보들은
+ http://git-scm.com/ 에서 참조할 수 있다)를 사용하는 것이지만 순수한
+ 패치파일의 형식으로 보내는 것도 무관하다.
- 2주 후에 -rc1 커널이 배포되며 지금부터는 전체 커널의 안정성에 영향을
미칠수 있는 새로운 기능들을 포함하지 않는 패치들만이 추가될 수 있다.
완전히 새로운 드라이버(혹은 파일시스템)는 -rc1 이후에만 받아들여진다는
@@ -253,8 +253,6 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H
것이다.
- 이러한 프로세스는 커널이 "준비(ready)"되었다고 여겨질때까지 계속된다.
프로세스는 대체로 6주간 지속된다.
- - 각 -rc 배포에 있는 알려진 회귀의 목록들은 다음 URI에 남겨진다.
- http://kernelnewbies.org/known_regressions
커널 배포에 있어서 언급할만한 가치가 있는 리눅스 커널 메일링 리스트의
Andrew Morton의 글이 있다.
diff --git a/Documentation/laptops/toshiba_haps.txt b/Documentation/laptops/toshiba_haps.txt
index 11dbcfdc9e7a..0c1d88dedbde 100644
--- a/Documentation/laptops/toshiba_haps.txt
+++ b/Documentation/laptops/toshiba_haps.txt
@@ -19,7 +19,7 @@ Author: Azael Avalos <coproscefalo@gmail.com>
--------------
This driver provides support for the accelerometer found in various Toshiba
-laptops, being called "Toshiba HDD Protection - Shock Sensor" officialy,
+laptops, being called "Toshiba HDD Protection - Shock Sensor" officially,
and detects laptops automatically with this device.
On Windows, Toshiba provided software monitors this device and provides
automatic HDD protection (head unload) on sudden moves or harsh vibrations,
diff --git a/Documentation/lzo.txt b/Documentation/lzo.txt
index ea45dd3901e3..285c54f66779 100644
--- a/Documentation/lzo.txt
+++ b/Documentation/lzo.txt
@@ -69,9 +69,9 @@ Description
IMPORTANT NOTE : in the code some length checks are missing because certain
instructions are called under the assumption that a certain number of bytes
- follow because it has already been garanteed before parsing the instructions.
+ follow because it has already been guaranteed before parsing the instructions.
They just have to "refill" this credit if they consume extra bytes. This is
- an implementation design choice independant on the algorithm or encoding.
+ an implementation design choice independent on the algorithm or encoding.
Byte sequences
diff --git a/Documentation/mmc/00-INDEX b/Documentation/mmc/00-INDEX
index a9ba6720ffdf..4623bc0aa0bb 100644
--- a/Documentation/mmc/00-INDEX
+++ b/Documentation/mmc/00-INDEX
@@ -6,3 +6,5 @@ mmc-dev-parts.txt
- info on SD and MMC device partitions
mmc-async-req.txt
- info on mmc asynchronous requests
+mmc-tools.txt
+ - info on mmc-utils tools
diff --git a/Documentation/mmc/mmc-tools.txt b/Documentation/mmc/mmc-tools.txt
new file mode 100644
index 000000000000..735509c165d5
--- /dev/null
+++ b/Documentation/mmc/mmc-tools.txt
@@ -0,0 +1,34 @@
+MMC tools introduction
+======================
+
+There is one MMC test tools called mmc-utils, which is maintained by Chris Ball,
+you can find it at the below public git repository:
+http://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git/
+
+Functions
+=========
+
+The mmc-utils tools can do the following:
+ - Print and parse extcsd data.
+ - Determine the eMMC writeprotect status.
+ - Set the eMMC writeprotect status.
+ - Set the eMMC data sector size to 4KB by disabling emulation.
+ - Create general purpose partition.
+ - Enable the enhanced user area.
+ - Enable write reliability per partition.
+ - Print the response to STATUS_SEND (CMD13).
+ - Enable the boot partition.
+ - Set Boot Bus Conditions.
+ - Enable the eMMC BKOPS feature.
+ - Permanently enable the eMMC H/W Reset feature.
+ - Permanently disable the eMMC H/W Reset feature.
+ - Send Sanitize command.
+ - Program authentication key for the device.
+ - Counter value for the rpmb device will be read to stdout.
+ - Read from rpmb device to output.
+ - Write to rpmb device from data file.
+ - Enable the eMMC cache feature.
+ - Disable the eMMC cache feature.
+ - Print and parse CID data.
+ - Print and parse CSD data.
+ - Print and parse SCR data.
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 6ab619fcc517..d58ff8467953 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -1256,7 +1256,7 @@ solution for a couple of reasons:
7. SocketCAN resources
-----------------------
- The Linux CAN / SocketCAN project ressources (project site / mailing list)
+ The Linux CAN / SocketCAN project resources (project site / mailing list)
are referenced in the MAINTAINERS file in the Linux source tree.
Search for CAN NETWORK [LAYERS|DRIVERS].
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index b9a4edf21ade..683ada5ad81d 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -230,7 +230,7 @@ opcodes as defined in linux/filter.h stand for:
mul 0, 4 A * <x>
div 0, 4 A / <x>
mod 0, 4 A % <x>
- neg 0, 4 !A
+ neg !A
and 0, 4 A & <x>
or 0, 4 A | <x>
xor 0, 4 A ^ <x>
diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt
index 7cb7264ad598..50022b3c8ebf 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/pps/pps.txt
@@ -98,7 +98,7 @@ pps_source_info_s as follows:
};
and then calling the function pps_register_source() in your
-intialization routine as follows:
+initialization routine as follows:
source = pps_register_source(&pps_ktimer_info,
PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
diff --git a/Documentation/robust-futexes.txt b/Documentation/robust-futexes.txt
index af6fce23e484..61c22d608759 100644
--- a/Documentation/robust-futexes.txt
+++ b/Documentation/robust-futexes.txt
@@ -126,9 +126,9 @@ vma based method:
- no VM changes are needed - 'struct address_space' is left alone.
- - no registration of individual locks is needed: robust mutexes dont
+ - no registration of individual locks is needed: robust mutexes don't
need any extra per-lock syscalls. Robust mutexes thus become a very
- lightweight primitive - so they dont force the application designer
+ lightweight primitive - so they don't force the application designer
to do a hard choice between performance and robustness - robust
mutexes are just as fast.
@@ -202,7 +202,7 @@ and the remaining bits are for the TID.
Testing, architecture support
-----------------------------
-i've tested the new syscalls on x86 and x86_64, and have made sure the
+I've tested the new syscalls on x86 and x86_64, and have made sure the
parsing of the userspace list is robust [ ;-) ] even if the list is
deliberately corrupted.
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 18b570990040..00ffdf187f0b 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -63,7 +63,7 @@ Release Date : Sat. Feb 9, 2013 17:00:00 PST 2013 -
Current Version : 06.506.00.00-rc1
Old Version : 06.504.01.00-rc1
1. Add 4k FastPath DIF support.
- 2. Dont load DevHandle unless FastPath enabled.
+ 2. Don't load DevHandle unless FastPath enabled.
3. Version and Changelog update.
-------------------------------------------------------------------------------
Release Date : Mon. Oct 1, 2012 17:00:00 PST 2012 -
@@ -105,7 +105,7 @@ Old Version : 00.00.06.12-rc1
1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380.
2. Mask off flags in ioctl path to prevent memory scribble with older
MegaCLI versions.
- 3. Remove poll_mode_io module paramater, sysfs node, and associated code.
+ 3. Remove poll_mode_io module parameter, sysfs node, and associated code.
-------------------------------------------------------------------------------
Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 -
(emaild-id:megaraidlinux@lsi.com)
@@ -199,7 +199,7 @@ Old Version : 00.00.04.31-rc1
1. Add the Online Controller Reset (OCR) to the Driver.
OCR is the new feature for megaraid_sas driver which
will allow the fw to do the chip reset which will not
- affact the OS behavious.
+ affect the OS behavior.
To add the OCR support, driver need to do:
a). reset the controller chips -- Xscale and Gen2 which
@@ -233,7 +233,7 @@ Old Version : 00.00.04.31-rc1
failed state. Driver will kill adapter if can't bring back FW after the
this three times reset.
4. Add the input parameter max_sectors to 1MB support to our GEN2 controller.
- customer can use the input paramenter max_sectors to add 1MB support to GEN2
+ customer can use the input parameter max_sectors to add 1MB support to GEN2
controller.
1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
@@ -582,11 +582,11 @@ ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW.
1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2 Current Version : 00.00.02.04
-3 Older Version : 00.00.02.04
+3 Older Version : 00.00.02.04
-i. Remove superflous instance_lock
+i. Remove superfluous instance_lock
- gets rid of the otherwise superflous instance_lock and avoids an unsave
+ gets rid of the otherwise superfluous instance_lock and avoids an unsafe
unsynchronized access in the error handler.
- Christoph Hellwig <hch@lst.de>
@@ -594,43 +594,43 @@ i. Remove superflous instance_lock
1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2 Current Version : 00.00.02.04
-3 Older Version : 00.00.02.04
+3 Older Version : 00.00.02.04
i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
- During initialization, depending on the device id, the template members
- are initialized with function pointers specific to the ppc or
- xscale controllers.
+ During initialization, depending on the device id, the template members
+ are initialized with function pointers specific to the ppc or
+ xscale controllers.
-Sumant Patro <Sumant.Patro@lsil.com>
-1 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro
+1 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro
<Sumant.Patro@lsil.com>
2 Current Version : 00.00.02.04
-3 Older Version : 00.00.02.02
-i. Register 16 byte CDB capability with scsi midlayer
+3 Older Version : 00.00.02.02
+i. Register 16 byte CDB capability with scsi midlayer
- "This patch properly registers the 16 byte command length capability of the
- megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
+ "This patch properly registers the 16 byte command length capability of the
+ megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
hardware supports 16 byte CDB's."
- -Joshua Giles <joshua_giles@dell.com>
+ -Joshua Giles <joshua_giles@dell.com>
1 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2 Current Version : 00.00.02.02
-3 Older Version : 00.00.02.01
+3 Older Version : 00.00.02.01
-i. New template defined to represent each family of controllers (identified by processor used).
- The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
+i. New template defined to represent each family of controllers (identified by processor used).
+ The template will have definitions that will be initialised to appropriate values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
-Sumant Patro <Sumant.Patro@lsil.com>
1 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com>
-2 Current Version : 00.00.02.00-rc4
-3 Older Version : 00.00.02.01
+2 Current Version : 00.00.02.00-rc4
+3 Older Version : 00.00.02.01
-i. Code reorganized to remove code duplication in megasas_build_cmd.
+i. Code reorganized to remove code duplication in megasas_build_cmd.
- "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command"
+ "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepaths and merge the reminder of megasas_build_cmd into megasas_queue_command"
- Christoph Hellwig <hch@lst.de>
diff --git a/Documentation/scsi/bfa.txt b/Documentation/scsi/bfa.txt
index f2d6e9d1791e..3cc4d80d6092 100644
--- a/Documentation/scsi/bfa.txt
+++ b/Documentation/scsi/bfa.txt
@@ -50,7 +50,7 @@ be found at:
http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
-and then click following respective util pacakge link
+and then click following respective util package link
Version Link
diff --git a/Documentation/security/self-protection.txt b/Documentation/security/self-protection.txt
new file mode 100644
index 000000000000..babd6378ec05
--- /dev/null
+++ b/Documentation/security/self-protection.txt
@@ -0,0 +1,261 @@
+# Kernel Self-Protection
+
+Kernel self-protection is the design and implementation of systems and
+structures within the Linux kernel to protect against security flaws in
+the kernel itself. This covers a wide range of issues, including removing
+entire classes of bugs, blocking security flaw exploitation methods,
+and actively detecting attack attempts. Not all topics are explored in
+this document, but it should serve as a reasonable starting point and
+answer any frequently asked questions. (Patches welcome, of course!)
+
+In the worst-case scenario, we assume an unprivileged local attacker
+has arbitrary read and write access to the kernel's memory. In many
+cases, bugs being exploited will not provide this level of access,
+but with systems in place that defend against the worst case we'll
+cover the more limited cases as well. A higher bar, and one that should
+still be kept in mind, is protecting the kernel against a _privileged_
+local attacker, since the root user has access to a vastly increased
+attack surface. (Especially when they have the ability to load arbitrary
+kernel modules.)
+
+The goals for successful self-protection systems would be that they
+are effective, on by default, require no opt-in by developers, have no
+performance impact, do not impede kernel debugging, and have tests. It
+is uncommon that all these goals can be met, but it is worth explicitly
+mentioning them, since these aspects need to be explored, dealt with,
+and/or accepted.
+
+
+## Attack Surface Reduction
+
+The most fundamental defense against security exploits is to reduce the
+areas of the kernel that can be used to redirect execution. This ranges
+from limiting the exposed APIs available to userspace, making in-kernel
+APIs hard to use incorrectly, minimizing the areas of writable kernel
+memory, etc.
+
+### Strict kernel memory permissions
+
+When all of kernel memory is writable, it becomes trivial for attacks
+to redirect execution flow. To reduce the availability of these targets
+the kernel needs to protect its memory with a tight set of permissions.
+
+#### Executable code and read-only data must not be writable
+
+Any areas of the kernel with executable memory must not be writable.
+While this obviously includes the kernel text itself, we must consider
+all additional places too: kernel modules, JIT memory, etc. (There are
+temporary exceptions to this rule to support things like instruction
+alternatives, breakpoints, kprobes, etc. If these must exist in a
+kernel, they are implemented in a way where the memory is temporarily
+made writable during the update, and then returned to the original
+permissions.)
+
+In support of this are (the poorly named) CONFIG_DEBUG_RODATA and
+CONFIG_DEBUG_SET_MODULE_RONX, which seek to make sure that code is not
+writable, data is not executable, and read-only data is neither writable
+nor executable.
+
+#### Function pointers and sensitive variables must not be writable
+
+Vast areas of kernel memory contain function pointers that are looked
+up by the kernel and used to continue execution (e.g. descriptor/vector
+tables, file/network/etc operation structures, etc). The number of these
+variables must be reduced to an absolute minimum.
+
+Many such variables can be made read-only by setting them "const"
+so that they live in the .rodata section instead of the .data section
+of the kernel, gaining the protection of the kernel's strict memory
+permissions as described above.
+
+For variables that are initialized once at __init time, these can
+be marked with the (new and under development) __ro_after_init
+attribute.
+
+What remains are variables that are updated rarely (e.g. GDT). These
+will need another infrastructure (similar to the temporary exceptions
+made to kernel code mentioned above) that allow them to spend the rest
+of their lifetime read-only. (For example, when being updated, only the
+CPU thread performing the update would be given uninterruptible write
+access to the memory.)
+
+#### Segregation of kernel memory from userspace memory
+
+The kernel must never execute userspace memory. The kernel must also never
+access userspace memory without explicit expectation to do so. These
+rules can be enforced either by support of hardware-based restrictions
+(x86's SMEP/SMAP, ARM's PXN/PAN) or via emulation (ARM's Memory Domains).
+By blocking userspace memory in this way, execution and data parsing
+cannot be passed to trivially-controlled userspace memory, forcing
+attacks to operate entirely in kernel memory.
+
+### Reduced access to syscalls
+
+One trivial way to eliminate many syscalls for 64-bit systems is building
+without CONFIG_COMPAT. However, this is rarely a feasible scenario.
+
+The "seccomp" system provides an opt-in feature made available to
+userspace, which provides a way to reduce the number of kernel entry
+points available to a running process. This limits the breadth of kernel
+code that can be reached, possibly reducing the availability of a given
+bug to an attack.
+
+An area of improvement would be creating viable ways to keep access to
+things like compat, user namespaces, BPF creation, and perf limited only
+to trusted processes. This would keep the scope of kernel entry points
+restricted to the more regular set of normally available to unprivileged
+userspace.
+
+### Restricting access to kernel modules
+
+The kernel should never allow an unprivileged user the ability to
+load specific kernel modules, since that would provide a facility to
+unexpectedly extend the available attack surface. (The on-demand loading
+of modules via their predefined subsystems, e.g. MODULE_ALIAS_*, is
+considered "expected" here, though additional consideration should be
+given even to these.) For example, loading a filesystem module via an
+unprivileged socket API is nonsense: only the root or physically local
+user should trigger filesystem module loading. (And even this can be up
+for debate in some scenarios.)
+
+To protect against even privileged users, systems may need to either
+disable module loading entirely (e.g. monolithic kernel builds or
+modules_disabled sysctl), or provide signed modules (e.g.
+CONFIG_MODULE_SIG_FORCE, or dm-crypt with LoadPin), to keep from having
+root load arbitrary kernel code via the module loader interface.
+
+
+## Memory integrity
+
+There are many memory structures in the kernel that are regularly abused
+to gain execution control during an attack, By far the most commonly
+understood is that of the stack buffer overflow in which the return
+address stored on the stack is overwritten. Many other examples of this
+kind of attack exist, and protections exist to defend against them.
+
+### Stack buffer overflow
+
+The classic stack buffer overflow involves writing past the expected end
+of a variable stored on the stack, ultimately writing a controlled value
+to the stack frame's stored return address. The most widely used defense
+is the presence of a stack canary between the stack variables and the
+return address (CONFIG_CC_STACKPROTECTOR), which is verified just before
+the function returns. Other defenses include things like shadow stacks.
+
+### Stack depth overflow
+
+A less well understood attack is using a bug that triggers the
+kernel to consume stack memory with deep function calls or large stack
+allocations. With this attack it is possible to write beyond the end of
+the kernel's preallocated stack space and into sensitive structures. Two
+important changes need to be made for better protections: moving the
+sensitive thread_info structure elsewhere, and adding a faulting memory
+hole at the bottom of the stack to catch these overflows.
+
+### Heap memory integrity
+
+The structures used to track heap free lists can be sanity-checked during
+allocation and freeing to make sure they aren't being used to manipulate
+other memory areas.
+
+### Counter integrity
+
+Many places in the kernel use atomic counters to track object references
+or perform similar lifetime management. When these counters can be made
+to wrap (over or under) this traditionally exposes a use-after-free
+flaw. By trapping atomic wrapping, this class of bug vanishes.
+
+### Size calculation overflow detection
+
+Similar to counter overflow, integer overflows (usually size calculations)
+need to be detected at runtime to kill this class of bug, which
+traditionally leads to being able to write past the end of kernel buffers.
+
+
+## Statistical defenses
+
+While many protections can be considered deterministic (e.g. read-only
+memory cannot be written to), some protections provide only statistical
+defense, in that an attack must gather enough information about a
+running system to overcome the defense. While not perfect, these do
+provide meaningful defenses.
+
+### Canaries, blinding, and other secrets
+
+It should be noted that things like the stack canary discussed earlier
+are technically statistical defenses, since they rely on a (leakable)
+secret value.
+
+Blinding literal values for things like JITs, where the executable
+contents may be partially under the control of userspace, need a similar
+secret value.
+
+It is critical that the secret values used must be separate (e.g.
+different canary per stack) and high entropy (e.g. is the RNG actually
+working?) in order to maximize their success.
+
+### Kernel Address Space Layout Randomization (KASLR)
+
+Since the location of kernel memory is almost always instrumental in
+mounting a successful attack, making the location non-deterministic
+raises the difficulty of an exploit. (Note that this in turn makes
+the value of leaks higher, since they may be used to discover desired
+memory locations.)
+
+#### Text and module base
+
+By relocating the physical and virtual base address of the kernel at
+boot-time (CONFIG_RANDOMIZE_BASE), attacks needing kernel code will be
+frustrated. Additionally, offsetting the module loading base address
+means that even systems that load the same set of modules in the same
+order every boot will not share a common base address with the rest of
+the kernel text.
+
+#### Stack base
+
+If the base address of the kernel stack is not the same between processes,
+or even not the same between syscalls, targets on or beyond the stack
+become more difficult to locate.
+
+#### Dynamic memory base
+
+Much of the kernel's dynamic memory (e.g. kmalloc, vmalloc, etc) ends up
+being relatively deterministic in layout due to the order of early-boot
+initializations. If the base address of these areas is not the same
+between boots, targeting them is frustrated, requiring a leak specific
+to the region.
+
+
+## Preventing Leaks
+
+Since the locations of sensitive structures are the primary target for
+attacks, it is important to defend against leaks of both kernel memory
+addresses and kernel memory contents (since they may contain kernel
+addresses or other sensitive things like canary values).
+
+### Unique identifiers
+
+Kernel memory addresses must never be used as identifiers exposed to
+userspace. Instead, use an atomic counter, an idr, or similar unique
+identifier.
+
+### Memory initialization
+
+Memory copied to userspace must always be fully initialized. If not
+explicitly memset(), this will require changes to the compiler to make
+sure structure holes are cleared.
+
+### Memory poisoning
+
+When releasing memory, it is best to poison the contents (clear stack on
+syscall return, wipe heap memory on a free), to avoid reuse attacks that
+rely on the old contents of memory. This frustrates many uninitialized
+variable attacks, stack info leaks, heap info leaks, and use-after-free
+attacks.
+
+### Destination tracking
+
+To help kill classes of bugs that result in kernel addresses being
+written to userspace, the destination of writes needs to be tracked. If
+the buffer is destined for userspace (e.g. seq_file backed /proc files),
+it should automatically censor sensitive values.
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index 379468e12680..da193e092fc3 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -28,7 +28,7 @@ The serial core provides a few helper functions. This includes identifing
the correct port structure (via uart_get_console) and decoding command line
arguments (uart_parse_options).
-There is also a helper function (uart_write_console) which performs a
+There is also a helper function (uart_console_write) which performs a
character by character write, translating newlines to CRLF sequences.
Driver writers are recommended to use this function rather than implementing
their own version.
@@ -41,27 +41,23 @@ It is the responsibility of the low level hardware driver to perform the
necessary locking using port->lock. There are some exceptions (which
are described in the uart_ops listing below.)
-There are three locks. A per-port spinlock, a per-port tmpbuf semaphore,
-and an overall semaphore.
+There are two locks. A per-port spinlock, and an overall semaphore.
From the core driver perspective, the port->lock locks the following
data:
port->mctrl
port->icount
- info->xmit.head (circ->head)
- info->xmit.tail (circ->tail)
+ port->state->xmit.head (circ_buf->head)
+ port->state->xmit.tail (circ_buf->tail)
The low level driver is free to use this lock to provide any additional
locking.
-The core driver uses the info->tmpbuf_sem lock to prevent multi-threaded
-access to the info->tmpbuf bouncebuffer used for port writes.
-
The port_sem semaphore is used to protect against ports being added/
removed or reconfigured at inappropriate times. Since v2.6.27, this
semaphore has been the 'mutex' member of the tty_port struct, and
-commonly referred to as the port mutex (or port->mutex).
+commonly referred to as the port mutex.
uart_ops
@@ -135,6 +131,24 @@ hardware.
Interrupts: locally disabled.
This call must not sleep
+ throttle(port)
+ Notify the serial driver that input buffers for the line discipline are
+ close to full, and it should somehow signal that no more characters
+ should be sent to the serial port.
+ This will be called only if hardware assisted flow control is enabled.
+
+ Locking: serialized with .unthrottle() and termios modification by the
+ tty layer.
+
+ unthrottle(port)
+ Notify the serial driver that characters can now be sent to the serial
+ port without fear of overrunning the input buffers of the line
+ disciplines.
+ This will be called only if hardware assisted flow control is enabled.
+
+ Locking: serialized with .throttle() and termios modification by the
+ tty layer.
+
send_xchar(port,ch)
Transmit a high priority character, even if the port is stopped.
This is used to implement XON/XOFF flow control and tcflow(). If
@@ -172,9 +186,7 @@ hardware.
should be terminated when another call is made with a zero
ctl.
- Locking: none.
- Interrupts: caller dependent.
- This call must not sleep
+ Locking: caller holds tty_port->mutex
startup(port)
Grab any interrupt resources and initialise any low level driver
@@ -192,7 +204,7 @@ hardware.
RTS nor DTR; this will have already been done via a separate
call to set_mctrl.
- Drivers must not access port->info once this call has completed.
+ Drivers must not access port->state once this call has completed.
This method will only be called when there are no more users of
this port.
@@ -204,7 +216,7 @@ hardware.
Flush any write buffers, reset any DMA state and stop any
ongoing DMA transfers.
- This will be called whenever the port->info->xmit circular
+ This will be called whenever the port->state->xmit circular
buffer is cleared.
Locking: port->lock taken.
@@ -250,10 +262,15 @@ hardware.
Other flags may be used (eg, xon/xoff characters) if your
hardware supports hardware "soft" flow control.
- Locking: caller holds port->mutex
+ Locking: caller holds tty_port->mutex
Interrupts: caller dependent.
This call must not sleep
+ set_ldisc(port,termios)
+ Notifier for discipline change. See Documentation/serial/tty.txt.
+
+ Locking: caller holds tty_port->mutex
+
pm(port,state,oldstate)
Perform any power management related activities on the specified
port. State indicates the new state (defined by
@@ -371,7 +388,7 @@ uart_get_baud_rate(port,termios,old,min,max)
Interrupts: n/a
uart_get_divisor(port,baud)
- Return the divsor (baud_base / baud) for the specified baud
+ Return the divisor (baud_base / baud) for the specified baud
rate, appropriately rounded.
If 38400 baud and custom divisor is selected, return the
@@ -449,11 +466,12 @@ mctrl_gpio_init(port, idx):
mctrl_gpio_free(dev, gpios):
This will free the requested gpios in mctrl_gpio_init().
- As devm_* function are used, there's generally no need to call
+ As devm_* functions are used, there's generally no need to call
this function.
mctrl_gpio_to_gpiod(gpios, gidx)
- This returns the gpio structure associated to the modem line index.
+ This returns the gpio_desc structure associated to the modem line
+ index.
mctrl_gpio_set(gpios, mctrl):
This will sets the gpios according to the mctrl state.
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 13f5619b2203..3a3b30ac2a75 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -212,7 +212,7 @@ it is currently registered in that slot. This is in case the slot has been
overwritten since you registered it.
The Magic SysRQ system works by registering key operations against a key op
-lookup table, which is defined in 'drivers/char/sysrq.c'. This key table has
+lookup table, which is defined in 'drivers/tty/sysrq.c'. This key table has
a number of operations registered into it at compile time, but is mutable,
and 2 functions are exported for interface to it:
register_sysrq_key and unregister_sysrq_key.
diff --git a/Documentation/timers/hrtimers.txt b/Documentation/timers/hrtimers.txt
index ce31f65e12e7..588d85724f10 100644
--- a/Documentation/timers/hrtimers.txt
+++ b/Documentation/timers/hrtimers.txt
@@ -28,9 +28,9 @@ several reasons why such integration is hard/impossible:
- the unpredictable [O(N)] overhead of cascading leads to delays which
necessitate a more complex handling of high resolution timers, which
- in turn decreases robustness. Such a design still led to rather large
+ in turn decreases robustness. Such a design still leads to rather large
timing inaccuracies. Cascading is a fundamental property of the timer
- wheel concept, it cannot be 'designed out' without unevitably
+ wheel concept, it cannot be 'designed out' without inevitably
degrading other portions of the timers.c code in an unacceptable way.
- the implementation of the current posix-timer subsystem on top of
@@ -119,7 +119,7 @@ was not really a win, due to the different data structures. Also, the
hrtimer functions now have clearer behavior and clearer names - such as
hrtimer_try_to_cancel() and hrtimer_cancel() [which are roughly
equivalent to del_timer() and del_timer_sync()] - so there's no direct
-1:1 mapping between them on the algorithmical level, and thus no real
+1:1 mapping between them on the algorithmic level, and thus no real
potential for code sharing either.
Basic data types: every time value, absolute or relative, is in a
diff --git a/Documentation/video4linux/README.cx88 b/Documentation/video4linux/README.cx88
index 35fae23f883b..b09ce36b921e 100644
--- a/Documentation/video4linux/README.cx88
+++ b/Documentation/video4linux/README.cx88
@@ -50,7 +50,7 @@ the driver. What to do then?
cx88-cards.c. If that worked, mail me your changes as unified
diff ("diff -u").
(3) Or you can mail me the config information. I need at least the
- following informations to add the card:
+ following information to add the card:
* the PCI Subsystem ID ("0070:3400" from the line above,
"lspci -v" output is fine too).
diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ
index d3f1d7783d1c..646a47de0016 100644
--- a/Documentation/video4linux/bttv/Sound-FAQ
+++ b/Documentation/video4linux/bttv/Sound-FAQ
@@ -55,7 +55,7 @@ receiver chips. Some boards use the i2c bus instead of the gpio pins
to connect the mux chip.
As mentioned above, there is a array which holds the required
-informations for each known board. You basically have to create a new
+information for each known board. You basically have to create a new
line for your board. The important fields are these two:
struct tvcard
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 54dd9b9c6c31..59cbc803aad6 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -220,7 +220,7 @@ resulting effect on persistent huge page allocation is as follows:
node list of "all" with numactl --interleave or --membind [-m] to achieve
interleaving over all nodes in the system or cpuset.
-4) Any task mempolicy specifed--e.g., using numactl--will be constrained by
+4) Any task mempolicy specified--e.g., using numactl--will be constrained by
the resource limits of any cpuset in which the task runs. Thus, there will
be no way for a task with non-default policy running in a cpuset with a
subset of the system nodes to allocate huge pages outside the cpuset
@@ -275,10 +275,10 @@ This command mounts a (pseudo) filesystem of type hugetlbfs on the directory
options sets the owner and group of the root of the file system. By default
the uid and gid of the current process are taken. The mode option sets the
mode of root of file system to value & 01777. This value is given in octal.
-By default the value 0755 is picked. If the paltform supports multiple huge
+By default the value 0755 is picked. If the platform supports multiple huge
page sizes, the pagesize option can be used to specify the huge page size and
associated pool. pagesize is specified in bytes. If pagesize is not specified
-the paltform's default huge page size and associated pool will be used. The
+the platform's default huge page size and associated pool will be used. The
size option sets the maximum value of memory (huge pages) allowed for that
filesystem (/mnt/huge). The size option can be specified in bytes, or as a
percentage of the specified huge page pool (nr_hugepages). The size is
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
index 0e1e55588b59..eafcefa15261 100644
--- a/Documentation/vm/pagemap.txt
+++ b/Documentation/vm/pagemap.txt
@@ -62,7 +62,7 @@ There are four components to pagemap:
14. SWAPBACKED
15. COMPOUND_HEAD
16. COMPOUND_TAIL
- 16. HUGE
+ 17. HUGE
18. UNEVICTABLE
19. HWPOISON
20. NOPAGE
diff --git a/Documentation/x86/intel_mpx.txt b/Documentation/x86/intel_mpx.txt
index 818518a3ff01..1a5a12184a35 100644
--- a/Documentation/x86/intel_mpx.txt
+++ b/Documentation/x86/intel_mpx.txt
@@ -136,7 +136,7 @@ A: MPX-enabled application will possibly create a lot of bounds tables in
If we were to preallocate them for the 128TB of user virtual address
space, we would need to reserve 512TB+2GB, which is larger than the
entire virtual address space today. This means they can not be reserved
- ahead of time. Also, a single process's pre-popualated bounds directory
+ ahead of time. Also, a single process's pre-populated bounds directory
consumes 2GB of virtual *AND* physical memory. IOW, it's completely
infeasible to prepopulate bounds directories.
@@ -151,7 +151,7 @@ A: This would work if we could hook the site of each and every memory
these calls.
Q: Could a bounds fault be handed to userspace and the tables allocated
- there in a signal handler intead of in the kernel?
+ there in a signal handler instead of in the kernel?
A: mmap() is not on the list of safe async handler functions and even
if mmap() would work it still requires locking or nasty tricks to
keep track of the allocation state there.
diff --git a/Documentation/xillybus.txt b/Documentation/xillybus.txt
index 81d111b4dc28..1660145b9969 100644
--- a/Documentation/xillybus.txt
+++ b/Documentation/xillybus.txt
@@ -215,7 +215,7 @@ in xillybus_core.c as follows:
choice is a non-zero value, to match standard UNIX behavior.
* synchronous: A non-zero value means that the pipe is synchronous. See
- Syncronization above.
+ Synchronization above.
* bufsize: Each DMA buffer's size. Always a power of two.
diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO
index 54ea24ff63c7..f0613b92e0be 100644
--- a/Documentation/zh_CN/HOWTO
+++ b/Documentation/zh_CN/HOWTO
@@ -207,7 +207,7 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循
- 每当一个新版本的内核被发布,为期两周的集成窗口将被打开。在这段时间里
维护者可以向Linus提交大段的修改,通常这些修改已经被放到-mm内核中几个
星期了。提交大量修改的首选方式是使用git工具(内核的代码版本管理工具
- ,更多的信息可以在http://git.or.cz/获取),不过使用普通补丁也是可以
+ ,更多的信息可以在http://git-scm.com/获取),不过使用普通补丁也是可以
的。
- 两个星期以后-rc1版本内核发布。之后只有不包含可能影响整个内核稳定性的
新功能的补丁才可能被接受。请注意一个全新的驱动程序(或者文件系统)有
@@ -218,8 +218,6 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循
时,一个新的-rc版本就会被发布。计划是每周都发布新的-rc版本。
- 这个过程一直持续下去直到内核被认为达到足够稳定的状态,持续时间大概是
6个星期。
- - 以下地址跟踪了在每个-rc发布中发现的退步列表:
- http://kernelnewbies.org/known_regressions
关于内核发布,值得一提的是Andrew Morton在linux-kernel邮件列表中如是说:
“没有人知道新内核何时会被发布,因为发布是根据已知bug的情况来决定
diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt
index 1145bf864082..c1dd968c5ee9 100644
--- a/Documentation/zh_CN/arm64/booting.txt
+++ b/Documentation/zh_CN/arm64/booting.txt
@@ -8,7 +8,7 @@ or if there is a problem with the translation.
M: Will Deacon <will.deacon@arm.com>
zh_CN: Fu Wei <wefu@redhat.com>
-C: 1926e54f115725a9248d0c4c65c22acaf94de4c4
+C: 55f058e7574c3615dea4615573a19bdb258696c6
---------------------------------------------------------------------
Documentation/arm64/booting.txt 的中文翻译
@@ -20,7 +20,7 @@ Documentation/arm64/booting.txt 的中文翻译
中文版维护者: 傅炜 Fu Wei <wefu@redhat.com>
中文版翻译者: 傅炜 Fu Wei <wefu@redhat.com>
中文版校译者: 傅炜 Fu Wei <wefu@redhat.com>
-本文翻译提交时的 Git 检出点为: 1926e54f115725a9248d0c4c65c22acaf94de4c4
+本文翻译提交时的 Git 检出点为: 55f058e7574c3615dea4615573a19bdb258696c6
以下为正文
---------------------------------------------------------------------
@@ -125,18 +125,22 @@ AArch64 内核当前没有提供自解压代码,因此如果使用了压缩内
1 - 4K
2 - 16K
3 - 64K
- 位 3-63: 保留。
+ 位 3: 内核物理位置
+ 0 - 2MB 对齐基址应尽量靠近内存起始处,因为
+ 其基址以下的内存无法通过线性映射访问
+ 1 - 2MB 对齐基址可以在物理内存的任意位置
+ 位 4-63: 保留。
- 当 image_size 为零时,引导装载程序应试图在内核映像末尾之后尽可能
多地保留空闲内存供内核直接使用。对内存空间的需求量因所选定的内核
特性而异, 并无实际限制。
-内核映像必须被放置在靠近可用系统内存起始的 2MB 对齐为基址的
-text_offset 字节处,并从该处被调用。当前,对 Linux 来说在此基址以下的
-内存是无法使用的,因此强烈建议将系统内存的起始作为这个基址。2MB 对齐
-基址和内核映像起始地址之间的区域对于内核来说没有特殊意义,且可能被
-用于其他目的。
+内核映像必须被放置在任意一个可用系统内存 2MB 对齐基址的 text_offset
+字节处,并从该处被调用。2MB 对齐基址和内核映像起始地址之间的区域对于
+内核来说没有特殊意义,且可能被用于其他目的。
从映像起始地址算起,最少必须准备 image_size 字节的空闲内存供内核使用。
+注: v4.6 之前的版本无法使用内核映像物理偏移以下的内存,所以当时建议
+将映像尽量放置在靠近系统内存起始的地方。
任何提供给内核的内存(甚至在映像起始地址之前),若未从内核中标记为保留
(如在设备树(dtb)的 memreserve 区域),都将被认为对内核是可用。