diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 138 |
1 files changed, 45 insertions, 93 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 290f02ee0157..89c4b5ccc68d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -14,6 +14,7 @@ config ARM select CLONE_BACKWARDS select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS + select GENERIC_ALLOCATOR select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IDLE_POLL_SETUP @@ -24,6 +25,7 @@ config ARM select GENERIC_SMP_IDLE_THREAD select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER + select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL @@ -60,12 +62,12 @@ config ARM select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP + select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE) select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 select HAVE_VIRT_CPU_ACCOUNTING_GEN select IRQ_FORCED_THREADING - select KTIME_SCALAR select MODULES_USE_ELF_REL select NO_BOOTMEM select OLD_SIGACTION @@ -84,6 +86,7 @@ config ARM <http://www.arm.linux.org.uk/>. config ARM_HAS_SG_CHAIN + select ARCH_HAS_SG_CHAIN bool config NEED_SG_DMA_LENGTH @@ -240,13 +243,6 @@ config ARM_PATCH_PHYS_VIRT this feature (eg, building a kernel for a single machine) and you need to shrink the kernel to the minimal size. -config NEED_MACH_GPIO_H - bool - help - Select this when mach/gpio.h is required to provide special - definitions for this platform. The need for mach/gpio.h should - be avoided when possible. - config NEED_MACH_IO_H bool help @@ -263,8 +259,22 @@ config NEED_MACH_MEMORY_H config PHYS_OFFSET hex "Physical address of main memory" if MMU - depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + depends on !ARM_PATCH_PHYS_VIRT default DRAM_BASE if !MMU + default 0x00000000 if ARCH_EBSA110 || \ + EP93XX_SDCE3_SYNC_PHYS_OFFSET || \ + ARCH_FOOTBRIDGE || \ + ARCH_INTEGRATOR || \ + ARCH_IOP13XX || \ + ARCH_KS8695 || \ + (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) + default 0x10000000 if ARCH_OMAP1 || ARCH_RPC + default 0x20000000 if ARCH_S5PV210 + default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET + default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100 + default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET + default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET + default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET help Please provide the physical address corresponding to the location of main memory in your system. @@ -321,7 +331,6 @@ config ARCH_INTEGRATOR select HAVE_TCM select ICST select MULTI_IRQ_HANDLER - select NEED_MACH_MEMORY_H select PLAT_VERSATILE select SPARSE_IRQ select USE_OF @@ -341,7 +350,6 @@ config ARCH_REALVIEW select ICST select NEED_MACH_MEMORY_H select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD help This enables support for ARM Ltd RealView boards. @@ -356,7 +364,6 @@ config ARCH_VERSATILE select HAVE_MACH_CLKDEV select ICST select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_CLOCK select VERSATILE_FPGA_IRQ help @@ -383,6 +390,7 @@ config ARCH_CLPS711X select CPU_ARM720T select GENERIC_CLOCKEVENTS select MFD_SYSCON + select SOC_BUS help Support for Cirrus Logic 711x/721x/731x based boards. @@ -436,7 +444,6 @@ config ARCH_EP93XX select ARM_VIC select CLKDEV_LOOKUP select CPU_ARM920T - select NEED_MACH_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -529,21 +536,6 @@ config ARCH_DOVE help Support for the Marvell Dove SoC 88AP510 -config ARCH_KIRKWOOD - bool "Marvell Kirkwood" - select ARCH_REQUIRE_GPIOLIB - select CPU_FEROCEON - select GENERIC_CLOCKEVENTS - select MVEBU_MBUS - select PCI - select PCI_QUIRKS - select PINCTRL - select PINCTRL_KIRKWOOD - select PLAT_ORION_LEGACY - help - Support for the following Marvell Kirkwood series SoCs: - 88F6180, 88F6192 and 88F6281. - config ARCH_MV78XX0 bool "Marvell MV78xx0" select ARCH_REQUIRE_GPIOLIB @@ -635,6 +627,7 @@ config ARCH_PXA select AUTO_ZRELADDR select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE @@ -661,6 +654,7 @@ config ARCH_SHMOBILE_LEGACY select ARCH_SHMOBILE select ARM_PATCH_PHYS_VIRT if MMU select CLKDEV_LOOKUP + select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -671,6 +665,7 @@ config ARCH_SHMOBILE_LEGACY select NO_IOPORT_MAP select PINCTRL select PM_GENERIC_DOMAINS if PM + select SH_CLK_CPG select SPARSE_IRQ help Support for Renesas ARM SoC platforms using a non-multiplatform @@ -759,61 +754,6 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems -config ARCH_S5P64X0 - bool "Samsung S5P6440 S5P6450" - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V6 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select SAMSUNG_ATAGS - select SAMSUNG_WDT_RESET - help - Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, - SMDK6450. - -config ARCH_S5PC100 - bool "Samsung S5PC100" - select ARCH_REQUIRE_GPIOLIB - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V7 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select SAMSUNG_ATAGS - select SAMSUNG_WDT_RESET - help - Samsung S5PC100 series based systems - -config ARCH_S5PV210 - bool "Samsung S5PV210/S5PC110" - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_SPARSEMEM_ENABLE - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V7 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select NEED_MACH_MEMORY_H - select SAMSUNG_ATAGS - help - Samsung S5PV210/S5PC110 series based systems - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -952,10 +892,10 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-keystone/Kconfig" -source "arch/arm/mach-kirkwood/Kconfig" - source "arch/arm/mach-ks8695/Kconfig" +source "arch/arm/mach-meson/Kconfig" + source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-moxart/Kconfig" @@ -964,6 +904,8 @@ source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-mediatek/Kconfig" + source "arch/arm/mach-mxs/Kconfig" source "arch/arm/mach-netx/Kconfig" @@ -1005,10 +947,6 @@ source "arch/arm/mach-s3c24xx/Kconfig" source "arch/arm/mach-s3c64xx/Kconfig" -source "arch/arm/mach-s5p64x0/Kconfig" - -source "arch/arm/mach-s5pc100/Kconfig" - source "arch/arm/mach-s5pv210/Kconfig" source "arch/arm/mach-exynos/Kconfig" @@ -1475,6 +1413,15 @@ config MCPM for (multi-)cluster based systems, such as big.LITTLE based systems. +config MCPM_QUAD_CLUSTER + bool + depends on MCPM + help + To avoid wasting resources unnecessarily, MCPM only supports up + to 2 clusters by default. + Platforms with 3 or 4 clusters that use MCPM must select this + option to allow the additional clusters to be managed. + config BIG_LITTLE bool "big.LITTLE support (Experimental)" depends on CPU_V7 && SMP @@ -1555,10 +1502,12 @@ config ARM_PSCI config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX + default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ + SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI default 392 if ARCH_U8500 default 352 if ARCH_VT8500 + default 288 if ARCH_ROCKCHIP default 264 if MACH_H4700 default 0 help @@ -1570,7 +1519,7 @@ source kernel/Kconfig.preempt config HZ_FIXED int - default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ ARCH_S5PV210 || ARCH_EXYNOS4 default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY @@ -1712,6 +1661,10 @@ config ARCH_SELECT_MEMORY_MODEL config HAVE_ARCH_PFN_VALID def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM +config HAVE_GENERIC_RCU_GUP + def_bool y + depends on ARM_LPAE + config HIGHMEM bool "High Memory Support" depends on MMU @@ -1826,7 +1779,7 @@ config XEN_DOM0 depends on XEN config XEN - bool "Xen guest support on ARM (EXPERIMENTAL)" + bool "Xen guest support on ARM" depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 @@ -2195,7 +2148,6 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK def_bool y |