summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts')
-rw-r--r--arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts571
1 files changed, 571 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
new file mode 100644
index 000000000000..2d8d319bec83
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
+ *
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+ model = "Turris Omnia";
+ compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ aliases {
+ ethernet0 = &eth0;
+ ethernet1 = &eth1;
+ ethernet2 = &eth2;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1024 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+
+ /* USB part of the PCIe2/USB 2.0 port */
+ usb@58000 {
+ status = "okay";
+ };
+
+ sata@a8000 {
+ status = "okay";
+ };
+
+ sdhci@d8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ status = "okay";
+
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ usb3@f0000 {
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ status = "okay";
+ };
+ };
+
+ pcie {
+ status = "okay";
+
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ slot-power-limit-milliwatt = <10000>;
+ };
+
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ slot-power-limit-milliwatt = <10000>;
+ };
+
+ pcie@3,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ slot-power-limit-milliwatt = <10000>;
+ };
+ };
+ };
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_i2c>;
+ tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
+ maximum-power-milliwatt = <3000>;
+
+ /*
+ * For now this has to be enabled at boot time by U-Boot when
+ * a SFP module is present. Read more in the comment in the
+ * eth2 node below.
+ */
+ status = "disabled";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&audio_controller 1>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
+};
+
+&audio_controller {
+ /* Pin header U16, GPIO51 in SPDIFO mode */
+ pinctrl-0 = <&spdif_pins>;
+ pinctrl-names = "default";
+ spdif-mode;
+ status = "okay";
+};
+
+&bm {
+ status = "okay";
+};
+
+&bm_bppi {
+ status = "okay";
+};
+
+/* Connected to 88E6176 switch, port 6 */
+&eth0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ status = "okay";
+ phy-mode = "rgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+/* Connected to 88E6176 switch, port 5 */
+&eth1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ status = "okay";
+ phy-mode = "rgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
+ bm,pool-short = <3>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+/* WAN port */
+&eth2 {
+ /*
+ * eth2 is connected via a multiplexor to both the SFP cage and to
+ * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
+ * a SFP module is present, as determined by the mode-def0 GPIO.
+ *
+ * Until kernel supports this configuration properly, in case SFP module
+ * is present, U-Boot has to enable the sfp node above, remove phy
+ * handle and add managed = "in-band-status" property.
+ */
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-handle = <&phy1>;
+ phys = <&comphy5 2>;
+ sfp = <&sfp>;
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
+ label = "wan";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ i2cmux@70 {
+ compatible = "nxp,pca9547";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ /* STM32F0 command interface at address 0x2a */
+
+ led-controller@2b {
+ compatible = "cznic,turris-omnia-leds";
+ reg = <0x2b>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ /*
+ * LEDs are controlled by MCU (STM32F0) at
+ * address 0x2b.
+ *
+ * LED functions are not stable yet:
+ * - there are 3 LEDs connected via MCU to PCIe
+ * ports. One of these ports supports mSATA.
+ * There is no mSATA nor PCIe function.
+ * For now we use LED_FUNCTION_WLAN, since
+ * in most cases users have wifi cards in
+ * these slots
+ * - there are 2 LEDs dedicated for user: A and
+ * B. Again there is no such function defined.
+ * For now we use LED_FUNCTION_INDICATOR
+ */
+
+ multi-led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ multi-led@1 {
+ reg = <0x1>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ multi-led@2 {
+ reg = <0x2>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <3>;
+ };
+
+ multi-led@3 {
+ reg = <0x3>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <2>;
+ };
+
+ multi-led@4 {
+ reg = <0x4>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <1>;
+ };
+
+ multi-led@5 {
+ reg = <0x5>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_WAN;
+ };
+
+ multi-led@6 {
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <4>;
+ };
+
+ multi-led@7 {
+ reg = <0x7>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <3>;
+ };
+
+ multi-led@8 {
+ reg = <0x8>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <2>;
+ };
+
+ multi-led@9 {
+ reg = <0x9>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ };
+
+ multi-led@a {
+ reg = <0xa>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <0>;
+ };
+
+ multi-led@b {
+ reg = <0xb>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_POWER;
+ };
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+
+ /* The EEPROM contains data for bootloader.
+ * Contents:
+ * struct omnia_eeprom {
+ * u32 magic; (=0x0341a034 in LE)
+ * u32 ramsize; (in GiB)
+ * char regdomain[4];
+ * u32 crc32;
+ * };
+ */
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ /* routed to PCIe0/mSATA connector (CN7A) */
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ /* routed to PCIe1/USB2 connector (CN61A) */
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ /* routed to PCIe2 connector (CN62A) */
+ };
+
+ sfp_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ /* routed to SFP+ */
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ /* ATSHA204A-MAHDA-T crypto module */
+ crypto@64 {
+ compatible = "atmel,atsha204a";
+ reg = <0x64>;
+ };
+ };
+
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ /* exposed on pin header */
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ pcawan: gpio@71 {
+ /*
+ * GPIO expander for SFP+ signals and
+ * and phy irq
+ */
+ compatible = "nxp,pca9538";
+ reg = <0x71>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcawan_pins>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ marvell,reg-init = <3 18 0 0x4985>,
+ <3 16 0xfff0 0x0001>;
+
+ /* irq is connected to &pcawan pin 7 */
+ };
+
+ /* Switch MV88E6176 at address 0x10 */
+ switch@10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&swint_pins>;
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsa,member = <0 0>;
+ reg = <0x10>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ ports@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ ports@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ ports@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ ports@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ ports@5 {
+ reg = <5>;
+ ethernet = <&eth1>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ports@6 {
+ reg = <6>;
+ ethernet = <&eth0>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pcawan_pins: pcawan-pins {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ swint_pins: swint-pins {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ spi0cs0_pins: spi0cs0-pins {
+ marvell,pins = "mpp25";
+ marvell,function = "spi0";
+ };
+
+ spi0cs2_pins: spi0cs2-pins {
+ marvell,pins = "mpp26";
+ marvell,function = "spi0";
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fl164k", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x00100000>;
+ label = "U-Boot";
+ };
+
+ partition@100000 {
+ reg = <0x00100000 0x00700000>;
+ label = "Rescue system";
+ };
+ };
+ };
+
+ /* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
+};
+
+&uart0 {
+ /* Pin header CN10 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ /* Pin header CN11 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};