diff options
Diffstat (limited to 'arch/arm/boot/dts')
| -rw-r--r-- | arch/arm/boot/dts/arm/integratorap.dts | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6sx.dtsi | 14 | ||||
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi | 9 |
5 files changed, 25 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts index 5b52d75bc6be..d9927d3181dc 100644 --- a/arch/arm/boot/dts/arm/integratorap.dts +++ b/arch/arm/boot/dts/arm/integratorap.dts @@ -158,7 +158,7 @@ valid-mask = <0x003fffff>; }; - pci: pciv3@62000000 { + pci: pci@62000000 { compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; device_type = "pci"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi index 1a599c294ab8..1ca4d219609f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi @@ -182,7 +182,7 @@ pinctrl-0 = <&pinctrl_rtc_int>; reg = <0x68>; interrupt-parent = <&gpio7>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index 3a4308666552..a05069d49cb8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -863,7 +863,6 @@ reg = <0>; ldb_from_lcdif1: endpoint { - remote-endpoint = <&lcdif1_to_ldb>; }; }; @@ -1010,6 +1009,8 @@ <&clks IMX6SX_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1022,6 +1023,8 @@ <&clks IMX6SX_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1034,6 +1037,8 @@ <&clks IMX6SX_CLK_USDHC3>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1309,11 +1314,8 @@ power-domains = <&pd_disp>; status = "disabled"; - ports { - port { - lcdif1_to_ldb: endpoint { - remote-endpoint = <&ldb_from_lcdif1>; - }; + port { + lcdif1_to_ldb: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index 54026c2c93fa..6ffb428dc939 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -1184,6 +1184,8 @@ <&clks IMX7D_USDHC1_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -1196,6 +1198,8 @@ <&clks IMX7D_USDHC2_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -1208,6 +1212,8 @@ <&clks IMX7D_USDHC3_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi index b958607c71dc..96451c8a815c 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi @@ -145,6 +145,8 @@ /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) + /* Added to support GPIO controlled PHY reset */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE7) >; }; @@ -153,6 +155,8 @@ /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) + /* Added to support GPIO controlled PHY reset */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; @@ -215,6 +219,7 @@ baseboard_eeprom: baseboard_eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; + vcc-supply = <&ldo4_reg>; #address-cells = <1>; #size-cells = <1>; @@ -377,6 +382,10 @@ ethphy0: ethernet-phy@0 { reg = <0>; + /* Support GPIO reset on revision C3 boards */ + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <300>; + reset-deassert-us = <6500>; }; }; |