diff options
Diffstat (limited to 'arch/arm/boot')
109 files changed, 776 insertions, 1075 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index efe4152e5846..d092993864f3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -994,16 +994,24 @@ dtb-$(CONFIG_SOC_OMAP5) += \ omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb +am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo +am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ am57xx-beagle-x15-revc.dtb \ + am57xx-evm.dtb \ + am57xx-evm-reva3.dtb \ am5729-beagleboneai.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ + am572x-idk-touchscreen.dtbo \ am571x-idk.dtb \ + am571x-idk-touchscreen.dtbo \ am574x-idk.dtb \ + am57xx-idk-lcd-osd101t2045.dtbo \ + am57xx-idk-lcd-osd101t2587.dtbo \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ @@ -1033,9 +1041,6 @@ dtb-$(CONFIG_ARCH_PXA) += \ pxa300-raumfeld-speaker-m.dtb \ pxa300-raumfeld-speaker-one.dtb \ pxa300-raumfeld-speaker-s.dtb -dtb-$(CONFIG_ARCH_OXNAS) += \ - ox810se-wd-mbwe.dtb \ - ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 947497413977..67c7fcc52ce6 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -29,25 +29,23 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; user-led0 { gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; default-state = "on"; }; user-led1 { gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "gpio"; default-state = "on"; }; }; - user_buttons: user_buttons { + user_buttons: user-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; @@ -70,14 +68,14 @@ }; &am33xx_pinmux { - user_buttons_pins: pinmux_user_buttons { + user_buttons_pins: pinmux-user-buttons { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ >; }; - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ @@ -87,7 +85,7 @@ /* CAN */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ @@ -144,7 +142,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cb_gpio_pins>; - cb_gpio_pins: pinmux_cb_gpio { + cb_gpio_pins: pinmux-cb-gpio { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ @@ -154,7 +152,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -178,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1 { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -194,14 +192,14 @@ >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ >; }; - uart3_pins: pinmux_uart3 { + uart3_pins: pinmux-uart3 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index e2cec1ffaa4c..034dc5181679 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -14,6 +14,7 @@ aliases { rtc0 = &i2c_rtc; rtc1 = &rtc; + rtc2 = &tps; }; cpus { @@ -48,7 +49,7 @@ /* EMMC */ &am33xx_pinmux { - emmc_pins: pinmux_emmc_pins { + emmc_pins: pinmux-emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ @@ -124,7 +125,7 @@ /* I2C Busses */ &am33xx_pinmux { - i2c0_pins: pinmux_i2c0 { + i2c0_pins: pinmux-i2c0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) @@ -164,7 +165,7 @@ /* NAND memory */ &am33xx_pinmux { - nandflash_pins: pinmux_nandflash { + nandflash_pins: pinmux-nandflash { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -202,7 +203,6 @@ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -316,7 +316,7 @@ /* SPI Busses */ &am33xx_pinmux { - spi0_pins: pinmux_spi0 { + spi0_pins: pinmux-spi0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 7b3966ee51b9..3894f14a914c 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -18,7 +18,7 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; @@ -39,7 +39,7 @@ /* User Leds */ &am33xx_pinmux { - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ @@ -49,7 +49,7 @@ /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -65,7 +65,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -108,7 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&user_gpios_pins>; - user_gpios_pins: pinmux_user_gpios { + user_gpios_pins: pinmux-user-gpios { pinctrl-single,pins = < /* DIGIN 1-4 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ @@ -126,7 +126,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -155,14 +155,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ @@ -184,7 +184,7 @@ /* RS485 - UART1 */ &am33xx_pinmux { - uart1_rs485_pins: pinmux_uart1_rs485_pins { + uart1_rs485_pins: pinmux-uart1-rs485-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index f957fea8208e..6a103f17585b 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -8,8 +8,34 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; - sound: sound_iface { - compatible = "ti,da830-evm-audio"; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-wega"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_iface_main>; + simple-audio-card,frame-master = <&sound_iface_main>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + sound_iface_main: simple-audio-card,codec { + sound-dai = <&tlv320aic3007>; + clocks = <&mcasp0_fck>; + }; + }; vcc3v3: fixedregulator1 { @@ -23,7 +49,7 @@ /* Audio */ &am33xx_pinmux { - mcasp0_pins: pinmux_mcasp0 { + mcasp0_pins: pinmux-mcasp0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -36,6 +62,7 @@ &i2c0 { tlv320aic3007: tlv320aic3007@18 { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3007"; reg = <0x18>; AVDD-supply = <&vcc3v3>; @@ -47,6 +74,7 @@ }; &mcasp0 { + #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcasp0_pins>; op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ @@ -59,23 +87,10 @@ status = "okay"; }; -&sound { - ti,model = "AM335x-Wega"; - ti,audio-codec = <&tlv320aic3007>; - ti,mcasp-controller = <&mcasp0>; - ti,audio-routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "LINE1L", "Line In", - "LINE1R", "Line In"; - clocks = <&mcasp0_fck>; - clock-names = "mclk"; - status = "okay"; -}; /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -91,7 +106,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -131,7 +146,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -161,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso new file mode 100644 index 000000000000..c051ee6c1130 --- /dev/null +++ b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso new file mode 100644 index 000000000000..573e932b1239 --- /dev/null +++ b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso new file mode 100644 index 000000000000..12385a31061e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-evm.dtso @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DT overlay for AM57xx GP EVM boards + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +&{/} { + compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + model = "TI AM5728 EVM"; + + aliases { + display0 = "/display"; + display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be + // resolved here correcly based on + // information in the base dtb symbol + // table with a fix in dtc + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-user1 { + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + label = "USER1"; + linux,code = <BTN_1>; + }; + + button-user2 { + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + label = "USER2"; + linux,code = <BTN_2>; + }; + + button-user3 { + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + label = "USER3"; + linux,code = <BTN_3>; + }; + + button-user4 { + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + label = "USER4"; + linux,code = <BTN_4>; + }; + + button-user5 { + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + label = "USER5"; + linux,code = <BTN_5>; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; + backlight = <&lcd_bl>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + label = "lcd"; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 243 245 247 249 251 252 253 255>; + default-brightness-level = <8>; + pwms = <&ehrpwm1 0 50000 0>; + }; +}; + +&ehrpwm1 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reg = <0x5c>; + reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&dss { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi_out: endpoint { + data-lines = <24>; + remote-endpoint = <&lcd_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso new file mode 100644 index 000000000000..25d74e9f3c9e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2045-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso new file mode 100644 index 000000000000..8cea7ba32487 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2587-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 2bcec5419b66..45cc784659fd 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -62,7 +62,7 @@ }; usb@58000 { - status = "ok"; + status = "okay"; }; ethernet@70000 { diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 180e4b1aa2f6..5cd593028aff 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -578,7 +578,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 8aa9e8dea337..95ecb7d040a8 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -43,7 +43,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 83bcf9fe0152..4617805c7748 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -220,7 +220,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 1346b8f2b259..999adeca6f33 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -669,7 +669,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1fdd9a249165..0ca849885d1f 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -415,7 +415,7 @@ &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; - status = "ok"; + status = "okay"; cs3 { #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 85408d4c6f2e..062c86361640 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -422,7 +422,7 @@ clocks = <&gate_clk 3>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; audio0: audio-controller@b0000 { diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index a1e22f630638..660cc7fac4db 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -16,6 +16,10 @@ model = "Samsung ARTIK5 evaluation board"; compatible = "samsung,artik5-eval", "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + + aliases { + mmc0 = &mshc_2; + }; }; &mshc_2 { diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 0ac3f284fbb8..3fdd922e635c 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -17,6 +17,11 @@ / { compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + aliases { + mmc0 = &mshc_0; + mmc1 = &mshc_1; + }; + chosen { stdout-path = &serial_2; }; @@ -321,6 +326,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 80d90fe7fad1..2de877d4ccc5 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -22,6 +22,7 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; }; memory@40000000 { @@ -443,6 +444,7 @@ vmmc-supply = <&vemmc_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 1f9cba0607e1..88fb3e68ff02 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -23,6 +23,8 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; + mmc1 = &mshc_1; }; chosen { @@ -624,6 +626,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 28bb2ce8ccf7..bd37f1b587f0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -28,9 +28,6 @@ aliases { pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; - mshc0 = &mshc_0; - mshc1 = &mshc_1; - mshc2 = &mshc_2; spi0 = &spi_0; spi1 = &spi_1; i2c0 = &i2c_0; @@ -346,7 +343,7 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos3250-pmu", "syscon"; + compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; @@ -354,12 +351,11 @@ clock-names = "clkout8"; clocks = <&cmu CLK_FIN_PLL>; #clock-cells = <1>; - }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; pd_cam: power-domain@10023c00 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 44dcb1377475..8dd6976ab0a7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -105,12 +105,6 @@ reg = <0x12570000 0x14>; }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023c40 0x20>; @@ -181,11 +175,16 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4210-pmu", "syscon"; + compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; dsi_0: dsi@11c80000 { diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index bba85011ecc9..37cd4dde53e4 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -25,6 +25,12 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 1103e7f92b57..f1927ca15e08 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -30,6 +30,11 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 181c99eca675..b566f878ed84 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -25,6 +25,10 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index b8e9dd23fc51..ff6ee4b2c31b 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -26,6 +26,12 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 62bf335d5bed..8fe0d5d2be2d 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -24,6 +24,12 @@ 0x50000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; stdout-path = "serial2:115200n8"; @@ -516,7 +522,7 @@ }; &mct { - compatible = "none"; + status = "disabled"; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index b596e997e451..ded232b04e0d 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -20,6 +20,10 @@ model = "TOPEET iTop 4412 Elite board based on Exynos4412"; compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait"; stdout-path = "serial2:115200n8"; @@ -182,7 +186,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index e42e39dc0e40..7bc6968af9c3 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -23,6 +23,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + }; + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203f000 0x1000>; @@ -476,6 +480,7 @@ vmmc-supply = <&buck9_reg>; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 525f945c4b91..e6b949c1a00f 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -25,6 +25,9 @@ aliases { i2c11 = &i2c_max77693; i2c12 = &i2c_max77693_fuel; + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; }; chosen { @@ -497,8 +500,7 @@ pinctrl-0 = <&fimc_is_uart>; pinctrl-names = "default"; status = "okay"; - - }; +}; &fimc_lite_0 { status = "okay"; @@ -592,7 +594,6 @@ /* CAM_B_CLKOUT */ clocks = <&camera 1>; clock-names = "extclk"; - samsung,camclk-out = <1>; gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { @@ -979,6 +980,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 7c2780d3e37c..45ef7b7ba7e0 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -13,6 +13,11 @@ #include "exynos-mfc-reserved-memory.dtsi" / { + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + }; + chosen { stdout-path = &serial_1; }; @@ -533,6 +538,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ea9fd284386d..23b151645d66 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -25,6 +25,11 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + mmc1 = &sdhci_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -498,6 +503,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index 3e05a49f29ff..0b89d5682f85 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -26,6 +26,12 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; + }; + chosen { stdout-path = &serial_2; }; @@ -188,14 +194,12 @@ pinctrl-names = "default"; interrupt-parent = <&gpx0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - irq-trigger = <0x1>; st,adc-freq = <3>; st,mod-12b = <1>; st,ref-sel = <0>; st,sample-time = <3>; - stmpe_adc { + adc { compatible = "st,stmpe-adc"; #io-channel-cells = <1>; st,norequest-mask = <0x2f>; @@ -695,6 +699,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; bus-width = <4>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a40ff394977c..715dfcba1417 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -22,6 +22,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index e0b6162d2e2a..5a2dcdc5c28b 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -17,6 +17,10 @@ model = "FriendlyARM TINY4412 board based on Exynos4412"; compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc0 = &sdhci_2; + }; + chosen { stdout-path = &serial_0; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 11f9dd94b6b3..82a36fb5ee8b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -28,7 +28,6 @@ pinctrl3 = &pinctrl_3; fimc-lite0 = &fimc_lite_0; fimc-lite1 = &fimc_lite_1; - mshc0 = &mshc_0; }; bus_acp: bus-acp { @@ -798,7 +797,7 @@ }; &pmu_system_controller { - compatible = "samsung,exynos4412-pmu", "syscon"; + compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon"; clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 2e3da5670bc2..d586189966da 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -192,12 +197,15 @@ vddio-supply = <&vcc_1v8_reg>; vddlvds-supply = <&vcc_3v3_reg>; reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - bridge_out_ep: endpoint { - remote-endpoint = <&panel_ep>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; }; }; }; @@ -586,6 +594,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 831b3494bd46..bb623726ef1e 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -17,6 +17,8 @@ compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5"; aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -350,6 +352,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 3d84b9c6dea3..59b2cc35c37b 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -15,6 +15,9 @@ / { aliases { i2c104 = &i2c_104; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_3; /* WiFi */ }; memory@40000000 { @@ -549,6 +552,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* uSD card */ diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 5eca10ecd550..c12bb17631b7 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_1; + }; + chosen { bootargs = "console=tty1"; stdout-path = "serial3:115200n8"; @@ -431,6 +436,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 60a623e3a200..1a4c6c028d03 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -30,10 +30,6 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; - mshc3 = &mmc_3; i2c4 = &i2c_4; i2c5 = &i2c_5; i2c6 = &i2c_6; @@ -290,7 +286,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5250-pmu", "syscon"; + compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -298,6 +294,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; watchdog@101d0000 { @@ -810,18 +816,6 @@ status = "disabled"; }; - dp_phy: video-phy-0 { - compatible = "samsung,exynos5250-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: video-phy-1 { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - dsi_0: dsi@14500000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x14500000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 387b8494f18f..d072a7398866 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -18,6 +18,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -89,6 +94,7 @@ cap-mmc-highspeed; mmc-hs200-1_8v; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 6ddd1dd2fb0b..882fc77c4bc4 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -21,6 +21,8 @@ aliases { ethernet = ðernet; + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -513,6 +515,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; vmmc-supply = <&ldo20_reg>; vqmmc-supply = <&ldo11_reg>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index b8f953c41c73..bb29b76f6f6a 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -18,6 +18,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -61,6 +66,7 @@ cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 55b7759682a9..809ddda02e53 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -23,6 +23,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial3:115200n8"; }; @@ -778,6 +783,7 @@ status = "okay"; non-removable; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi index 63675fe189cd..f525b2f5e4e0 100644 --- a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi +++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi @@ -28,6 +28,11 @@ * for more details. */ + aliases { + mmc0 = &mmc_0; + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -604,6 +609,7 @@ bus-width = <8>; cap-mmc-highspeed; card-detect-delay = <200>; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9e2123470cad..7a48f2b32819 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -31,6 +31,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* uSD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -722,6 +725,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 4d7b6d9008a7..e299344e427a 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -21,6 +21,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { bootargs = "init=/linuxrc"; stdout-path = "serial2:115200n8"; @@ -355,6 +360,7 @@ status = "okay"; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 13d7be236a23..dd291f1199f2 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -19,9 +19,6 @@ compatible = "samsung,exynos5420", "samsung,exynos5"; aliases { - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -696,18 +693,6 @@ status = "disabled"; }; - dp_phy: dp-video-phy { - compatible = "samsung,exynos5420-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: mipi-video-phy { - compatible = "samsung,exynos5420-mipi-video-phy"; - syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - dsi: dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; @@ -933,7 +918,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5420-pmu", "syscon"; + compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -941,6 +926,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5420-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,exynos5420-mipi-video-phy"; + #phy-cells = <1>; + }; }; tmu_cpu0: tmu@10060000 { diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 30fc677d8bac..2f5b8602e020 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -19,6 +19,10 @@ reg = <0x40000000 0x7ea00000>; }; + aliases { + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index e6e7e2ff2a26..b4a851aa8881 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -13,6 +13,10 @@ #include "exynos5422-odroid-core.dtsi" / { + aliases { + mmc0 = &mmc_0; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -472,6 +476,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; max-frequency = <200000000>; diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts index df41723d56d4..c35261a338ff 100644 --- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts @@ -19,6 +19,10 @@ chassis-type = "handset"; + aliases { + mmc0 = &mmc_0; + }; + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x80000000>; /* 2 GiB */ @@ -597,6 +601,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 0ebcb66c6319..1f544f12da6c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -29,6 +29,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -703,6 +706,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index ce356c469e1e..d7f5daecc9dc 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -24,42 +24,42 @@ amba-bus { dual_timer0: dual_timer@800000 { - status = "ok"; + status = "okay"; }; uart0: serial@b00000 { /* console */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; - status = "ok"; + status = "okay"; }; uart1: serial@b01000 { /* modem */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; - status = "ok"; + status = "okay"; }; uart2: serial@b02000 { /* audience */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; - status = "ok"; + status = "okay"; }; uart3: serial@b03000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; - status = "ok"; + status = "okay"; }; uart4: serial@b04000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; - status = "ok"; + status = "okay"; }; pmx0: pinmux@803000 { diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index f5691dbc26d2..0210064bf6a5 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -23,7 +23,7 @@ soc { uart0: serial@4007000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts index bd4230d7dac9..765ab36e6f0c 100644 --- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts @@ -56,7 +56,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Coyote PCI boardfile. @@ -80,7 +80,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -102,7 +102,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts index 92b987bc3f99..6f5b4e4eb1cc 100644 --- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts @@ -112,7 +112,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Vulcan PCI boardfile. @@ -137,7 +137,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -159,7 +159,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts index 5ab09fb10dae..b9d46eb06507 100644 --- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts @@ -122,7 +122,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c) diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts index b740403b05a9..5a5e16cc7335 100644 --- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts @@ -159,7 +159,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Written based on the FSG-3 PCI boardfile. @@ -187,7 +187,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -209,7 +209,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts index b7cbc90e1c18..4d70f6afd13a 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts @@ -53,7 +53,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c) @@ -74,7 +74,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -91,7 +91,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts index a5943f51e8c2..97e3f25bb210 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts @@ -108,7 +108,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Avila PCI boardfile. @@ -142,7 +142,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -164,7 +164,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts index f80388b17a9e..9ec0169bacf8 100644 --- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts +++ b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts @@ -82,7 +82,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * The device has 4 slots (IDSEL) with one dedicated IRQ per slot. @@ -148,7 +148,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 32>; phy-mode = "rgmii"; @@ -170,7 +170,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 33>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts index cbc87b344f6a..8da6823e1dbe 100644 --- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts @@ -109,7 +109,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NAS 100D PCI boardfile (nas100d-pci.c) @@ -129,7 +129,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts index beaadda4685f..194945748dc3 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts @@ -40,7 +40,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -62,7 +62,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts index f17cab12a64b..7011fea6205b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts @@ -61,7 +61,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDPG425 PCI boardfile. @@ -95,7 +95,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -117,7 +117,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index 0edc5928e00b..da1e93212b86 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -116,7 +116,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant @@ -143,7 +143,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts index 5e7e31b74b04..4aba9e0214a0 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts @@ -117,7 +117,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * We have up to 2 slots (IDSEL) with 2 swizzled IRQs. @@ -141,7 +141,7 @@ * Do we need a new binding and property for this? */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -165,7 +165,7 @@ /* EthC - connected to KS8995 switch port 5 */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts index df2ca6d95ee5..19d56e9aec9d 100644 --- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts +++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts @@ -54,7 +54,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c) @@ -77,7 +77,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts index b444003c10e1..c550c421b659 100644 --- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts +++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts @@ -79,7 +79,7 @@ /* LAN port */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts index cf4010d60187..1db849515f9e 100644 --- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -121,7 +121,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * In the boardfile for the Cambria from OpenWRT the interrupts @@ -167,7 +167,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -188,7 +188,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts index 3d7cfa1a5ed4..4703a8b24765 100644 --- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts +++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts @@ -36,7 +36,7 @@ /* CHECKME: ethernet set-up taken from Gateworks Cambria */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -57,7 +57,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi index 146352ba848b..31c0a69771c4 100644 --- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi @@ -99,7 +99,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDP425 PCI boardfile. diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 5d6d074011df..abd5aef8b87d 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -159,7 +159,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 88be868cf71e..3a87b7943c70 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -534,7 +534,7 @@ &dss { pinctrl-names = "default"; pinctrl-0 = <&vout_pins>; - status = "ok"; + status = "okay"; port { dpi_out: endpoint { diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index 4352397b4f52..1f762af6f502 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -183,7 +183,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 1c880cf8fa91..3a69f65de81e 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -132,7 +132,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 21eb59041a7d..4f22ab451aae 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -506,6 +506,15 @@ }; }; + sdxc_a_pins: sdxc-a { + mux { + groups = "sdxc_d0_a", "sdxc_d13_a", + "sdxc_clk_a", "sdxc_cmd_a"; + function = "sdxc_a"; + bias-pull-up; + }; + }; + sdxc_b_pins: sdxc-b { mux { groups = "sdxc_d0_b", "sdxc_d13_b", @@ -568,6 +577,14 @@ bias-disable; }; }; + + xtal_32k_out_pins: xtal-32k-out { + mux { + groups = "xtal_32k_out"; + function = "xtal"; + bias-disable; + }; + }; }; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index d5a3fe21e8e7..5979209fe91e 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -580,8 +580,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson8b-gpio-intc"; + compatible = "amlogic,meson8b-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index fa6d55f1cfb9..aa4d4bf70629 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -19,7 +19,6 @@ ethernet0 = ðmac; i2c0 = &i2c_AO; serial0 = &uart_AO; - serial1 = &uart_A; mmc0 = &sd_card_slot; }; @@ -45,12 +44,32 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + + pinctrl-0 = <&xtal_32k_out_pins>; + pinctrl-names = "default"; + + reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>, + <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>; + + clocks = <&xtal_32k_out>; + clock-names = "ext_clock"; + }; + vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + xtal_32k_out: xtal-32k-out-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k_out"; + }; }; &cpu0 { @@ -192,6 +211,27 @@ vref-supply = <&vddio_ao1v8>; }; +/* SDIO wifi */ +&sdhc { + status = "okay"; + + pinctrl-0 = <&sdxc_a_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + max-frequency = <50000000>; + + disable-wp; + non-removable; + cap-mmc-highspeed; + cap-sd-highspeed; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; +}; + &sdio { status = "okay"; @@ -222,6 +262,12 @@ pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>; pinctrl-names = "default"; uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm20702a1"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + }; }; &uart_AO { diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index 1e96c865d41d..8adc0ef01f6c 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -14,7 +14,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - uart@3,0 { + serial@3,0 { compatible = "ns16550a"; reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ bank-width = <2>; @@ -50,7 +50,7 @@ gpmc,wr-data-mux-bus-ns = <45>; gpmc,wr-access-ns = <145>; }; - uart@3,1 { + serial@3,1 { compatible = "ns16550a"; reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ bank-width = <2>; @@ -61,7 +61,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,2 { + serial@3,2 { compatible = "ns16550a"; reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ bank-width = <2>; @@ -72,7 +72,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,3 { + serial@3,3 { compatible = "ns16550a"; reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ bank-width = <2>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 35eced6521ef..1a085bc01317 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 48e48b0c8190..e1b1a047f77a 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 87e0ab1bbe95..4183fde46059 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,8 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; - + compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -612,6 +611,22 @@ clock-frequency = <100000>; }; +&mcspi1 { + status = "disabled"; +}; + +&mcspi2 { + status = "disabled"; +}; + +&mcspi3 { + status = "disabled"; +}; + +&mcspi4 { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 9dca5bfc87ab..eadb5b857f48 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index c6f863bc03ad..3f0197ceae09 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 8e9c12cf51a7..bc95a8df2e6a 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 5188f96f431e..d36ceecb7328 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index ecb4ef738e07..f6bbea2be54c 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index d211bcc31174..a3cf3f443785 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b2f480022ff6..cbaf79c4e842 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 7f04dfad8203..3eb935df04dc 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index bc5a04e03336..3af8d10d7224 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index 065c31cbf0e2..813e3c9fe3b6 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index e38c1c51392c..8405bd9262de 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index e6dc23159c4d..b9558d736e79 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index 587c08ce282d..fcfc449f2abe 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index f57de6010994..6d14466c180a 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 281af6c113be..bcf20ff3f281 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index ea509956d7ac..c0252f8a798a 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index eb3893b9535e..4c36bde62491 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index b6879cdc5c13..0591af494184 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index ce58b1f208e8..ab52e8d68f76 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts deleted file mode 100644 index c59e06ff2423..000000000000 --- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts +++ /dev/null @@ -1,115 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox810se.dtsi" - -/ { - model = "Western Digital My Book World Edition"; - - compatible = "wd,mbwe", "oxsemi,ox810se"; - - chosen { - bootargs = "console=ttyS1,115200n8 earlyprintk=serial"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x48000000 0x8000000>; - }; - - aliases { - serial1 = &uart1; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power { - label = "power"; - gpios = <&gpio0 0 1>; - linux,code = <0x198>; - }; - - recovery { - label = "recovery"; - gpios = <&gpio0 4 1>; - linux,code = <0xab>; - }; - }; - - leds { - compatible = "gpio-leds"; - - a0 { - label = "activity0"; - gpios = <&gpio0 25 0>; - default-state = "keep"; - }; - - a1 { - label = "activity1"; - gpios = <&gpio0 26 0>; - default-state = "keep"; - }; - - a2 { - label = "activity2"; - gpios = <&gpio0 5 0>; - default-state = "keep"; - }; - - a3 { - label = "activity3"; - gpios = <&gpio0 6 0>; - default-state = "keep"; - }; - - a4 { - label = "activity4"; - gpios = <&gpio0 7 0>; - default-state = "keep"; - }; - - a5 { - label = "activity5"; - gpios = <&gpio1 2 0>; - default-state = "keep"; - }; - }; - - i2c-gpio { - compatible = "i2c-gpio"; - gpios = <&gpio0 3 0 /* sda */ - &gpio0 2 0 /* scl */ - >; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - rtc0: rtc@48 { - compatible = "st,m41t00"; - reg = <0x68>; - }; - }; -}; - -ða { - status = "okay"; -}; - -&uart1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi deleted file mode 100644 index 96c0745f7b70..000000000000 --- a/arch/arm/boot/dts/ox810se.dtsi +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/clock/oxsemi,ox810se.h> -#include <dt-bindings/reset/oxsemi,ox810se.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox810se"; - - cpus { - #address-cells = <0>; - #size-cells = <0>; - - cpu { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - clocks = <&armclk>; - }; - }; - - memory { - device_type = "memory"; - /* Max 256MB @ 0x48000000 */ - reg = <0x48000000 0x10000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - rpsclk: rpsclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc>; - }; - - pll400: pll400 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <733333333>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&pll400>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll400>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&intc>; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox810se-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <8>; - interrupt-names = "macirq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk 6>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset 6>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0a { - pins = "gpio31"; - function = "fct3"; - }; - uart0b { - pins = "gpio32"; - function = "fct3"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0c { - pins = "gpio27"; - function = "fct3"; - }; - uart0d { - pins = "gpio28"; - function = "fct3"; - }; - uart0e { - pins = "gpio29"; - function = "fct3"; - }; - uart0f { - pins = "gpio30"; - function = "fct3"; - }; - uart0g { - pins = "gpio33"; - function = "fct3"; - }; - uart0h { - pins = "gpio34"; - function = "fct3"; - }; - }; - - pinctrl_uart1: uart1 { - uart1a { - pins = "gpio20"; - function = "fct3"; - }; - uart1b { - pins = "gpio22"; - function = "fct3"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1c { - pins = "gpio8"; - function = "fct3"; - }; - uart1d { - pins = "gpio9"; - function = "fct3"; - }; - uart1e { - pins = "gpio23"; - function = "fct3"; - }; - uart1f { - pins = "gpio24"; - function = "fct3"; - }; - uart1g { - pins = "gpio25"; - function = "fct3"; - }; - uart1h { - pins = "gpio26"; - function = "fct3"; - }; - }; - - pinctrl_uart2: uart2 { - uart2a { - pins = "gpio6"; - function = "fct3"; - }; - uart2b { - pins = "gpio7"; - function = "fct3"; - }; - }; - - pinctrl_uart2_modem: uart2_modem { - uart2c { - pins = "gpio0"; - function = "fct3"; - }; - uart2d { - pins = "gpio1"; - function = "fct3"; - }; - uart2e { - pins = "gpio2"; - function = "fct3"; - }; - uart2f { - pins = "gpio3"; - function = "fct3"; - }; - uart2g { - pins = "gpio4"; - function = "fct3"; - }; - uart2h { - pins = "gpio5"; - function = "fct3"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x000000 0x100000>; - interrupts = <21>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x100000 0x100000>; - interrupts = <22>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <3>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 3>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - clocks = <&sysclk>; - interrupts = <23>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x300000 0x100000>; - clocks = <&sysclk>; - interrupts = <24>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART2>; - }; - - uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART3>; - }; - - uart3: serial@a00000 { - compatible = "ns16550a"; - reg = <0xa00000 0x100000>; - clocks = <&sysclk>; - interrupts = <30>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART4>; - }; - }; - - apb-bridge@45000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x45000000 0x1000000>; - - sys: sys-ctrl@0 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - reset: reset-controller { - compatible = "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - - rps@300000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x300000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox810se-rps-timer"; - reg = <0x200 0x40>; - clocks = <&rpsclk>; - interrupts = <4 5>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts deleted file mode 100644 index c3daceccde55..000000000000 --- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox820.dtsi" - -/ { - model = "Cloud Engines PogoPlug Series 3"; - - compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x60000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - leds { - compatible = "gpio-leds"; - - blue { - label = "pogoplug:blue"; - gpios = <&gpio0 2 0>; - default-state = "keep"; - }; - - orange { - label = "pogoplug:orange"; - gpios = <&gpio1 16 1>; - default-state = "keep"; - }; - - green { - label = "pogoplug:green"; - gpios = <&gpio1 17 1>; - default-state = "keep"; - }; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - read-only; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi deleted file mode 100644 index dde4364892bf..000000000000 --- a/arch/arm/boot/dts/ox820.dtsi +++ /dev/null @@ -1,299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/oxsemi,ox820.h> -#include <dt-bindings/reset/oxsemi,ox820.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox820"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "oxsemi,ox820-smp"; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <1>; - }; - }; - - memory { - device_type = "memory"; - /* Max 512MB @ 0x60000000 */ - reg = <0x60000000 0x20000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&osc>; - }; - - plla: plla { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <850000000>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&plla>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&gic>; - - nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk CLK_820_NAND>; - resets = <&reset RESET_NAND>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox820-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0 { - pins = "gpio30", "gpio31"; - function = "fct5"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0_modem_a { - pins = "gpio24", "gpio24", "gpio26", "gpio27"; - function = "fct4"; - }; - uart0_modem_b { - pins = "gpio28", "gpio29"; - function = "fct5"; - }; - }; - - pinctrl_uart1: uart1 { - uart1 { - pins = "gpio7", "gpio8"; - function = "fct4"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1_modem { - pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43"; - function = "fct4"; - }; - }; - - pinctrl_etha_mdio: etha_mdio { - etha_mdio { - pins = "gpio3", "gpio4"; - function = "fct1"; - }; - }; - - pinctrl_nand: nand { - nand { - pins = "gpio12", "gpio13", "gpio14", "gpio15", - "gpio16", "gpio17", "gpio18", "gpio19", - "gpio20", "gpio21", "gpio22", "gpio23", - "gpio24"; - function = "fct1"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x000000 0x100000>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x100000 0x100000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <18>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 18>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART2>; - }; - - rps@400000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x400000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox820-rps-timer"; - reg = <0x200 0x40>; - clocks = <&sysclk>; - interrupt-parent = <&intc>; - interrupts = <4>; - }; - }; - - sys: sys-ctrl@e00000 { - compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; - reg = <0xe00000 0x200000>; - - reset: reset-controller { - compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - }; - - apb-bridge@47000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x47000000 0x1000000>; - - scu: scu@0 { - compatible = "arm,arm11mp-scu"; - reg = <0x0 0x100>; - }; - - local-timer@600 { - compatible = "arm,arm11mp-twd-timer"; - reg = <0x600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&armclk>; - }; - - gic: interrupt-controller@1000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1000 0x1000>, - <0x100 0x500>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 0af63ddc4473..fa09295052c6 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -196,6 +196,19 @@ &i2c0 { status = "okay"; + + wm8978: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; + + eeprom@50 { + compatible = "st,24c01", "atmel,24c01"; + reg = <0x50>; + pagesize = <16>; + }; + touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; @@ -205,12 +218,6 @@ pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; - - wm8978: codec@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8978"; - reg = <0x1a>; - }; }; &i2c2 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 12e90a1cc6a1..1a9e4a96b2ff 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -566,7 +566,7 @@ interrupts = <29>; clocks = <&clocks CLK_CSIS>, <&clocks SCLK_CSIS>; - clock-names = "clk_csis", + clock-names = "csis", "sclk_csis"; bus-width = <4>; status = "disabled"; |