summaryrefslogtreecommitdiff
path: root/arch/arm/mach-aaec2000/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-aaec2000/include')
-rw-r--r--arch/arm/mach-aaec2000/include/mach/aaec2000.h207
-rw-r--r--arch/arm/mach-aaec2000/include/mach/aaed2000.h40
-rw-r--r--arch/arm/mach-aaec2000/include/mach/debug-macro.S37
-rw-r--r--arch/arm/mach-aaec2000/include/mach/dma.h9
-rw-r--r--arch/arm/mach-aaec2000/include/mach/entry-macro.S40
-rw-r--r--arch/arm/mach-aaec2000/include/mach/hardware.h50
-rw-r--r--arch/arm/mach-aaec2000/include/mach/io.h20
-rw-r--r--arch/arm/mach-aaec2000/include/mach/irqs.h46
-rw-r--r--arch/arm/mach-aaec2000/include/mach/memory.h30
-rw-r--r--arch/arm/mach-aaec2000/include/mach/system.h24
-rw-r--r--arch/arm/mach-aaec2000/include/mach/timex.h18
-rw-r--r--arch/arm/mach-aaec2000/include/mach/uncompress.h46
-rw-r--r--arch/arm/mach-aaec2000/include/mach/vmalloc.h16
13 files changed, 583 insertions, 0 deletions
diff --git a/arch/arm/mach-aaec2000/include/mach/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
new file mode 100644
index 000000000000..bc729c42f843
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/aaec2000.h
+ *
+ * AAEC-2000 registers definition
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Chip selects */
+#define AAEC_CS0 0x00000000
+#define AAEC_CS1 0x10000000
+#define AAEC_CS2 0x20000000
+#define AAEC_CS3 0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE AAEC_CS0
+#define AAEC_FLASH_SIZE SZ_64M
+
+/* Interrupt controller */
+#define IRQ_BASE __REG(0x80000500)
+#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
+#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */
+#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */
+#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE __REG(0x80000600)
+#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR __REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR __REG(0x8000060c) /* Control Register */
+#define UART1_SR __REG(0x80000610) /* Status Register */
+#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE __REG(0x80000700)
+#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR __REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR __REG(0x8000070c) /* Control Register */
+#define UART2_SR __REG(0x80000710) /* Status Register */
+#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE __REG(0x80000800)
+#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR __REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR __REG(0x8000080c) /* Control Register */
+#define UART3_SR __REG(0x80000810) /* Status Register */
+#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR 0x00
+#define UART_LCR 0x04
+#define UART_BRCR 0x08
+#define UART_CR 0x0c
+#define UART_SR 0x10
+#define UART_INT 0x14
+#define UART_INTM 0x18
+#define UART_INTRES 0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK (1 << 0) /* Send Break */
+#define UART_LCR_PEN (1 << 1) /* Parity Enable */
+#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN (1 << 0) /* UART Enable */
+#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP (1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS (1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS (1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS (1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS (1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE __REG(0x80000c00)
+#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */
+#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */
+#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */
+#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE __REG(0x80000d00)
+#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */
+#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */
+#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */
+#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE __REG(0x80000e00)
+#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */
+#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */
+#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */
+#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start Timer) */
+#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
+
+/* Power and State Control */
+#define POWER_BASE __REG(0x80000400)
+#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI __REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
+
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS 0x80000e00
+
+#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON (1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON (1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON (1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON (1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS 0x80003000
+
+#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
new file mode 100644
index 000000000000..f821295ca71b
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/aaed2000.h
+ *
+ * AAED-2000 specific bits definition
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE AAEC_CS3
+#define EXT_GPIO_VBASE 0xf8100000
+#define EXT_GPIO_LENGTH 0x00001000
+
+#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
new file mode 100644
index 000000000000..0b6351d7c389
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -0,0 +1,37 @@
+/* arch/arm/mach-aaec2000/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "hardware.h"
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x80000000 @ physical
+ movne \rx, #io_p2v(0x80000000) @ virtual
+ orr \rx, \rx, #0x00000800
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x10]
+ tst \rd, #(1 << 7)
+ beq 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#if 0
+1001: ldr \rd, [\rx, #0x10]
+ tst \rd, #(1 << 5)
+ beq 1001b
+#endif
+ .endm
diff --git a/arch/arm/mach-aaec2000/include/mach/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h
new file mode 100644
index 000000000000..2da846c72fe7
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/dma.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
new file mode 100644
index 000000000000..c8fb34469007
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper for aaec-2000 based platforms
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov r4, #0xf8000000
+ add r4, r4, #0x00000500
+ mov \base, r4
+ ldr \irqstat, [\base, #0]
+ cmp \irqstat, #0
+ bne 1001f
+ ldr \irqnr, =NR_IRQS+1
+ b 1003f
+1001: mov \irqnr, #0
+1002: ands \tmp, \irqstat, #1
+ mov \irqstat, \irqstat, LSR #1
+ add \irqnr, \irqnr, #1
+ beq 1002b
+ sub \irqnr, \irqnr, #1
+1003:
+ .endm
diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h
new file mode 100644
index 000000000000..965a6f6672d6
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/aaec2000.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE 0x80000000
+#define VIO_APB_BASE 0xf8000000
+#define IO_APB_LENGTH 0x2000
+#define PIO_AHB_BASE 0x80002000
+#define VIO_AHB_BASE 0xf8002000
+#define IO_AHB_LENGTH 0x2000
+
+#define VIO_BASE VIO_APB_BASE
+#define PIO_BASE PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x) (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x) (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x) io_p2v(x)
+#define __PREG(x) io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
new file mode 100644
index 000000000000..c87c24de1110
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h
new file mode 100644
index 000000000000..bf45c6d2f294
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/irqs.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ 3 /* Media Changed Interrupt */
+#define INT_SC 4 /* Sound Codec Interrupt */
+#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */
+#define INT_TICK 11 /* 64Hz Tick Interrupt */
+#define INT_UART1 12 /* UART1 Interrupt */
+#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD 14 /* LCD Interrupt */
+#define INT_SSI 15 /* SSI End of Transfer Interrupt */
+#define INT_UART3 16 /* UART3 Interrupt */
+#define INT_SCI 17 /* SCI Interrupt */
+#define INT_AAC 18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC 19 /* MMC Interrupt */
+#define INT_USB 20 /* USB Interrupt */
+#define INT_DMA 21 /* DMA Interrupt */
+#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI 27 /* BMI Interrupt */
+
+#define NR_IRQS (INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
new file mode 100644
index 000000000000..56ae900a482e
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/memory.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#define PHYS_OFFSET UL(0xf0000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * The nodes are the followings:
+ *
+ * node 0: 0xf000.0000 - 0xf3ff.ffff
+ * node 1: 0xf400.0000 - 0xf7ff.ffff
+ * node 2: 0xf800.0000 - 0xfbff.ffff
+ * node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+#define NODE_MEM_SIZE_BITS 26
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
new file mode 100644
index 000000000000..8f4115d734ce
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-aaed2000/include/mach/system.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h
new file mode 100644
index 000000000000..6c8edf4a8828
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/timex.h
+ *
+ * AAEC-2000 Architecture timex specification
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 508000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h
new file mode 100644
index 000000000000..381ecad1a1bb
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/uncompress.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+ unsigned long serial_port;
+ do {
+ serial_port = _UART3_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ serial_port = _UART1_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ serial_port = _UART2_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ return;
+ } while (0);
+
+ /* wait for space in the UART's transmitter */
+ while ((UART(UART_SR) & UART_SR_TxFF))
+ barrier();
+
+ /* send the character out. */
+ UART(UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
new file mode 100644
index 000000000000..551f68f666bf
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-aaec2000/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */