summaryrefslogtreecommitdiff
path: root/arch/arm/mach-nomadik
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-nomadik')
-rw-r--r--arch/arm/mach-nomadik/Kconfig2
-rw-r--r--arch/arm/mach-nomadik/Makefile2
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c27
-rw-r--r--arch/arm/mach-nomadik/include/mach/mtu.h45
-rw-r--r--arch/arm/mach-nomadik/include/mach/setup.h2
-rw-r--r--arch/arm/mach-nomadik/timer.c164
6 files changed, 30 insertions, 212 deletions
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 2a02b49c40f0..3c5e0f522e9c 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -5,13 +5,13 @@ menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select NOMADIK_8815
+ select HAS_MTU
endmenu
config NOMADIK_8815
bool
-
config I2C_BITBANG_8815NHK
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 412040982a40..36f67fb207d2 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
# Object file lists.
-obj-y += clock.o timer.o gpio.o
+obj-y += clock.o gpio.o
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 6bfd537d5afb..116394484e71 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -25,11 +25,18 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+
+#include <plat/mtu.h>
+
#include <mach/setup.h>
#include <mach/nand.h>
#include <mach/fsmc.h>
#include "clock.h"
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK 0x00007fff
+#define SRC_CR_INIT_VAL 0x2aaa8000
+
/* These adresses span 16MB, so use three individual pages */
static struct resource nhk8815_nand_resources[] = {
{
@@ -239,6 +246,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = {
/* will add more devices */
};
+static void __init nomadik_timer_init(void)
+{
+ u32 src_cr;
+
+ /* Configure timer sources in "system reset controller" ctrl reg */
+ src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+ src_cr &= SRC_CR_INIT_MASK;
+ src_cr |= SRC_CR_INIT_VAL;
+ writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+ /* Save global pointer to mtu, used by platform timer code */
+ mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+ nmdk_timer_init();
+}
+
+static struct sys_timer nomadik_timer = {
+ .init = nomadik_timer_init,
+};
+
static void __init nhk8815_platform_init(void)
{
int i;
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
deleted file mode 100644
index 76da7f085330..000000000000
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_ARCH_MTU_H
-#define __ASM_ARCH_MTU_H
-
-/*
- * The MTU device hosts four different counters, with 4 set of
- * registers. These are register names.
- */
-
-#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
-#define MTU_RIS 0x04 /* Raw interrupt status */
-#define MTU_MIS 0x08 /* Masked interrupt status */
-#define MTU_ICR 0x0C /* Interrupt clear register */
-
-/* per-timer registers take 0..3 as argument */
-#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
-#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
-#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
-#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
-
-/* bits for the control register */
-#define MTU_CRn_ENA 0x80
-#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
-#define MTU_CRn_PRESCALE_MASK 0x0c
-#define MTU_CRn_PRESCALE_1 0x00
-#define MTU_CRn_PRESCALE_16 0x04
-#define MTU_CRn_PRESCALE_256 0x08
-#define MTU_CRn_32BITS 0x02
-#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
-
-/* Other registers are usual amba/primecell registers, currently not used */
-#define MTU_ITCR 0xff0
-#define MTU_ITOP 0xff4
-
-#define MTU_PERIPH_ID0 0xfe0
-#define MTU_PERIPH_ID1 0xfe4
-#define MTU_PERIPH_ID2 0xfe8
-#define MTU_PERIPH_ID3 0xfeC
-
-#define MTU_PCELL0 0xff0
-#define MTU_PCELL1 0xff4
-#define MTU_PCELL2 0xff8
-#define MTU_PCELL3 0xffC
-
-#endif /* __ASM_ARCH_MTU_H */
-
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index a4e468cf63da..b7897edf1f35 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -15,7 +15,7 @@
extern void cpu8815_map_io(void);
extern void cpu8815_platform_init(void);
extern void cpu8815_init_irq(void);
-extern struct sys_timer nomadik_timer;
+extern void nmdk_timer_init(void);
#endif /* NOMADIK_8815 */
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
deleted file mode 100644
index d1738e7061d4..000000000000
--- a/arch/arm/mach-nomadik/timer.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * linux/arch/arm/mach-nomadik/timer.c
- *
- * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clockchips.h>
-#include <linux/jiffies.h>
-#include <asm/mach/time.h>
-#include <mach/mtu.h>
-
-#define TIMER_CTRL 0x80 /* No divisor */
-#define TIMER_PERIODIC 0x40
-#define TIMER_SZ32BIT 0x02
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK 0x00007fff
-#define SRC_CR_INIT_VAL 0x2aaa8000
-
-static u32 nmdk_count; /* accumulated count */
-static u32 nmdk_cycle; /* write-once */
-static __iomem void *mtu_base;
-
-/*
- * clocksource: the MTU device is a decrementing counters, so we negate
- * the value being read.
- */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
-{
- u32 count = readl(mtu_base + MTU_VAL(0));
- return nmdk_count + nmdk_cycle - count;
-
-}
-
-static struct clocksource nmdk_clksrc = {
- .name = "mtu_0",
- .rating = 120,
- .read = nmdk_read_timer,
- .shift = 20,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * Clockevent device: currently only periodic mode is supported
- */
-static void nmdk_clkevt_mode(enum clock_event_mode mode,
- struct clock_event_device *dev)
-{
- unsigned long flags;
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* enable interrupts -- and count current value? */
- raw_local_irq_save(flags);
- writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
- raw_local_irq_restore(flags);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- BUG(); /* Not supported, yet */
- /* FALLTHROUGH */
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- /* disable irq */
- raw_local_irq_save(flags);
- writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
- raw_local_irq_restore(flags);
- break;
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static struct clock_event_device nmdk_clkevt = {
- .name = "mtu_0",
- .features = CLOCK_EVT_FEAT_PERIODIC,
- .shift = 32,
- .rating = 100,
- .set_mode = nmdk_clkevt_mode,
-};
-
-/*
- * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
- * as we are the only users of mtu0 by now.
- */
-static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
-{
- /* ack: "interrupt clear register" */
- writel( 1 << 0, mtu_base + MTU_ICR);
-
- /* we can't count lost ticks, unfortunately */
- nmdk_count += nmdk_cycle;
- nmdk_clkevt.event_handler(&nmdk_clkevt);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static struct irqaction nmdk_timer_irq = {
- .name = "Nomadik Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = nmdk_timer_interrupt,
-};
-
-static void nmdk_timer_reset(void)
-{
- u32 cr;
-
- writel(0, mtu_base + MTU_CR(0)); /* off */
-
- /* configure load and background-load, and fire it up */
- writel(nmdk_cycle, mtu_base + MTU_LR(0));
- writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
- cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
- writel(cr, mtu_base + MTU_CR(0));
- writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
-}
-
-static void __init nmdk_timer_init(void)
-{
- u32 src_cr;
- unsigned long rate;
- int bits;
-
- rate = CLOCK_TICK_RATE; /* 2.4MHz */
- nmdk_cycle = (rate + HZ/2) / HZ;
-
- /* Configure timer sources in "system reset controller" ctrl reg */
- src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
- src_cr &= SRC_CR_INIT_MASK;
- src_cr |= SRC_CR_INIT_VAL;
- writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
- /* Save global pointer to mtu, used by functions above */
- mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
- /* Init the timer and register clocksource */
- nmdk_timer_reset();
-
- nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
- bits = 8*sizeof(nmdk_count);
- nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
-
- clocksource_register(&nmdk_clksrc);
-
- /* Register irq and clockevents */
- setup_irq(IRQ_MTU0, &nmdk_timer_irq);
- nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
- nmdk_clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&nmdk_clkevt);
-}
-
-struct sys_timer nomadik_timer = {
- .init = nmdk_timer_init,
-};