diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-ams-delta.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 96 |
1 files changed, 33 insertions, 63 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 9808cd27e2cf..0daf6c5b5c1c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -550,6 +550,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, &cx20442_codec_device, + &modem_nreset_device, }; static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { @@ -560,22 +561,6 @@ static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { &ams_delta_nand_gpio_table, }; -/* - * Some drivers may not use GPIO lookup tables but need to be provided - * with GPIO numbers. The same applies to GPIO based IRQ lines - some - * drivers may even not use GPIO layer but expect just IRQ numbers. - * We could either define GPIO lookup tables then use them on behalf - * of those devices, or we can use GPIO driver level methods for - * identification of GPIO and IRQ numbers. For the purpose of the latter, - * defina a helper function which identifies GPIO chips by their labels. - */ -static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) -{ - char *label = data; - - return !strcmp(label, chip->label); -} - static struct gpiod_hog ams_delta_gpio_hogs[] = { GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), @@ -615,14 +600,28 @@ static void __init modem_assign_irq(struct gpio_chip *chip) */ static void __init omap_gpio_deps_init(void) { + struct gpio_device *gdev; struct gpio_chip *chip; - chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label); - if (!chip) { - pr_err("%s: OMAP GPIO chip not found\n", __func__); + /* + * Some drivers may not use GPIO lookup tables but need to be provided + * with GPIO numbers. The same applies to GPIO based IRQ lines - some + * drivers may even not use GPIO layer but expect just IRQ numbers. + * We could either define GPIO lookup tables then use them on behalf + * of those devices, or we can use GPIO driver level methods for + * identification of GPIO and IRQ numbers. + * + * This reference will be leaked but that's alright as this device + * never goes down. + */ + gdev = gpio_device_find_by_label(OMAP_GPIO_LABEL); + if (!gdev) { + pr_err("%s: OMAP GPIO device not found\n", __func__); return; } + chip = gpio_device_get_chip(gdev); + /* * Start with FIQ initialization as it may have to request * and release successfully each OMAP GPIO pin in turn. @@ -782,26 +781,28 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = { { }, }; +static int ams_delta_modem_pm_activate(struct device *dev) +{ + modem_priv.regulator = regulator_get(dev, "RESET#"); + if (IS_ERR(modem_priv.regulator)) + return -EPROBE_DEFER; + + return 0; +} + +static struct dev_pm_domain ams_delta_modem_pm_domain = { + .activate = ams_delta_modem_pm_activate, +}; + static struct platform_device ams_delta_modem_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM1, .dev = { .platform_data = ams_delta_modem_ports, + .pm_domain = &ams_delta_modem_pm_domain, }, }; -static int __init modem_nreset_init(void) -{ - int err; - - err = platform_device_register(&modem_nreset_device); - if (err) - pr_err("Couldn't register the modem regulator device\n"); - - return err; -} - - /* * This function expects MODEM IRQ number already assigned to the port. * The MODEM device requires its RESET# pin kept high during probe. @@ -833,37 +834,6 @@ static int __init ams_delta_modem_init(void) } arch_initcall_sync(ams_delta_modem_init); -static int __init late_init(void) -{ - int err; - - err = modem_nreset_init(); - if (err) - return err; - - /* - * Once the modem device is registered, the modem_nreset - * regulator can be requested on behalf of that device. - */ - modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, - "RESET#"); - if (IS_ERR(modem_priv.regulator)) { - err = PTR_ERR(modem_priv.regulator); - goto unregister; - } - return 0; - -unregister: - platform_device_unregister(&ams_delta_modem_device); - return err; -} - -static void __init ams_delta_init_late(void) -{ - omap1_init_late(); - late_init(); -} - static void __init ams_delta_map_io(void) { omap1_map_io(); @@ -877,7 +847,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .init_early = omap1_init_early, .init_irq = omap1_init_irq, .init_machine = ams_delta_init, - .init_late = ams_delta_init_late, + .init_late = omap1_init_late, .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END |