summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1/board-osk.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/board-osk.c')
-rw-r--r--arch/arm/mach-omap1/board-osk.c147
1 files changed, 102 insertions, 45 deletions
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index df758c1f9237..7d5e6f9039d5 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -25,7 +25,8 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -64,13 +65,12 @@
/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
* alternate pin configurations for hardware-controlled blinking.
*/
-#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
-# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
-# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
-# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
-# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
-# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
+#define OSK_TPS_GPIO_USB_PWR_EN 0
+#define OSK_TPS_GPIO_LED_D3 1
+#define OSK_TPS_GPIO_LAN_RESET 2
+#define OSK_TPS_GPIO_DSP_PWR_EN 3
+#define OSK_TPS_GPIO_LED_D9 4
+#define OSK_TPS_GPIO_LED_D2 5
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
@@ -174,11 +174,20 @@ static const struct gpio_led tps_leds[] = {
/* NOTE: D9 and D2 have hardware blink support.
* Also, D9 requires non-battery power.
*/
- { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
- .default_trigger = "disk-activity", },
- { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
- { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
- .default_trigger = "heartbeat", },
+ { .name = "d9", .default_trigger = "disk-activity", },
+ { .name = "d2", },
+ { .name = "d3", .default_trigger = "heartbeat", },
+};
+
+static struct gpiod_lookup_table tps_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ /* Use local offsets on TPS65010 */
+ GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D9, NULL, 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D2, NULL, 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D3, NULL, 2, GPIO_ACTIVE_LOW),
+ { }
+ },
};
static struct gpio_led_platform_data tps_leds_data = {
@@ -192,29 +201,34 @@ static struct platform_device osk5912_tps_leds = {
.dev.platform_data = &tps_leds_data,
};
-static int osk_tps_setup(struct i2c_client *client, void *context)
+/* The board just hold these GPIOs hogged from setup to teardown */
+static struct gpio_desc *eth_reset;
+static struct gpio_desc *vdd_dsp;
+
+static int osk_tps_setup(struct i2c_client *client, struct gpio_chip *gc)
{
+ struct gpio_desc *d;
if (!IS_BUILTIN(CONFIG_TPS65010))
return -ENOSYS;
/* Set GPIO 1 HIGH to disable VBUS power supply;
* OHCI driver powers it up/down as needed.
*/
- gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
- gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+ d = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en",
+ GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH);
/* Free the GPIO again as the driver will request it */
- gpio_free(OSK_TPS_GPIO_USB_PWR_EN);
+ gpiochip_free_own_desc(d);
/* Set GPIO 2 high so LED D3 is off by default */
tps65010_set_gpio_out_value(GPIO2, HIGH);
/* Set GPIO 3 low to take ethernet out of reset */
- gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
- gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+ eth_reset = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_LAN_RESET, "smc_reset",
+ GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW);
/* GPIO4 is VDD_DSP */
- gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
- gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+ vdd_dsp = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power",
+ GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH);
/* REVISIT if DSP support isn't configured, power it off ... */
/* Let LED1 (D9) blink; leds-gpio may override it */
@@ -232,15 +246,22 @@ static int osk_tps_setup(struct i2c_client *client, void *context)
/* register these three LEDs */
osk5912_tps_leds.dev.parent = &client->dev;
+ gpiod_add_lookup_table(&tps_leds_gpio_table);
platform_device_register(&osk5912_tps_leds);
return 0;
}
+static void osk_tps_teardown(struct i2c_client *client, struct gpio_chip *gc)
+{
+ gpiochip_free_own_desc(eth_reset);
+ gpiochip_free_own_desc(vdd_dsp);
+}
+
static struct tps65010_board tps_board = {
- .base = OSK_TPS_GPIO_BASE,
.outmask = 0x0f,
.setup = osk_tps_setup,
+ .teardown = osk_tps_teardown,
};
static struct i2c_board_info __initdata osk_i2c_board_info[] = {
@@ -263,11 +284,6 @@ static void __init osk_init_smc91x(void)
{
u32 l;
- if ((gpio_request(0, "smc_irq")) < 0) {
- printk("Error requesting gpio 0 for smc91x irq\n");
- return;
- }
-
/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
l = omap_readl(EMIFS_CCS(1));
l |= 0x3;
@@ -279,10 +295,6 @@ static void __init osk_init_cf(int seg)
struct resource *res = &osk5912_cf_resources[1];
omap_cfg_reg(M7_1610_GPIO62);
- if ((gpio_request(62, "cf_irq")) < 0) {
- printk("Error requesting gpio 62 for CF irq\n");
- return;
- }
switch (seg) {
/* NOTE: CS0 could be configured too ... */
@@ -308,18 +320,17 @@ static void __init osk_init_cf(int seg)
seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
omap_writel(0x0004a1b3, EMIFS_CCS(seg)); /* synch mode 4 etc */
omap_writel(0x00000000, EMIFS_ACS(seg)); /* OE hold/setup */
-
- /* the CF I/O IRQ is really active-low */
- irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
}
static struct gpiod_lookup_table osk_usb_gpio_table = {
.dev_id = "ohci",
.table = {
/* Power GPIO on the I2C-attached TPS65010 */
- GPIO_LOOKUP("tps65010", 0, "power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("tps65010", OSK_TPS_GPIO_USB_PWR_EN, "power",
+ GPIO_ACTIVE_HIGH),
GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent",
GPIO_ACTIVE_HIGH),
+ { }
},
};
@@ -341,8 +352,32 @@ static struct omap_usb_config osk_usb_config __initdata = {
#define EMIFS_CS3_VAL (0x88013141)
+static struct gpiod_lookup_table osk_irq_gpio_table = {
+ .dev_id = NULL,
+ .table = {
+ /* GPIO used for SMC91x IRQ */
+ GPIO_LOOKUP(OMAP_GPIO_LABEL, 0, "smc_irq",
+ GPIO_ACTIVE_HIGH),
+ /* GPIO used for CF IRQ */
+ GPIO_LOOKUP("gpio-48-63", 14, "cf_irq",
+ GPIO_ACTIVE_HIGH),
+ /* GPIO used by the TPS65010 chip */
+ GPIO_LOOKUP("mpuio", 1, "tps65010",
+ GPIO_ACTIVE_HIGH),
+ /* GPIOs used for serial wakeup IRQs */
+ GPIO_LOOKUP_IDX("gpio-32-47", 5, "wakeup", 0,
+ GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-16-31", 2, "wakeup", 1,
+ GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-48-63", 1, "wakeup", 2,
+ GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
+
static void __init osk_init(void)
{
+ struct gpio_desc *d;
u32 l;
osk_init_smc91x();
@@ -359,10 +394,31 @@ static void __init osk_init(void)
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
- osk5912_smc91x_resources[1].start = gpio_to_irq(0);
- osk5912_smc91x_resources[1].end = gpio_to_irq(0);
- osk5912_cf_resources[0].start = gpio_to_irq(62);
- osk5912_cf_resources[0].end = gpio_to_irq(62);
+
+ /*
+ * Add the GPIOs to be used as IRQs and immediately look them up
+ * to be passed as an IRQ resource. This is ugly but should work
+ * until the day we convert to device tree.
+ */
+ gpiod_add_lookup_table(&osk_irq_gpio_table);
+
+ d = gpiod_get(NULL, "smc_irq", GPIOD_IN);
+ if (IS_ERR(d)) {
+ pr_err("Unable to get SMC IRQ GPIO descriptor\n");
+ } else {
+ irq_set_irq_type(gpiod_to_irq(d), IRQ_TYPE_EDGE_RISING);
+ osk5912_smc91x_resources[1] = DEFINE_RES_IRQ(gpiod_to_irq(d));
+ }
+
+ d = gpiod_get(NULL, "cf_irq", GPIOD_IN);
+ if (IS_ERR(d)) {
+ pr_err("Unable to get CF IRQ GPIO descriptor\n");
+ } else {
+ /* the CF I/O IRQ is really active-low */
+ irq_set_irq_type(gpiod_to_irq(d), IRQ_TYPE_EDGE_FALLING);
+ osk5912_cf_resources[0] = DEFINE_RES_IRQ(gpiod_to_irq(d));
+ }
+
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
l = omap_readl(USB_TRANSCEIVER_CTRL);
@@ -372,13 +428,15 @@ static void __init osk_init(void)
gpiod_add_lookup_table(&osk_usb_gpio_table);
omap1_usb_init(&osk_usb_config);
+ omap_serial_init();
+
/* irq for tps65010 chip */
/* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */
- if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
- gpio_direction_input(OMAP_MPUIO(1));
-
- omap_serial_init();
- osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
+ d = gpiod_get(NULL, "tps65010", GPIOD_IN);
+ if (IS_ERR(d))
+ pr_err("Unable to get TPS65010 IRQ GPIO descriptor\n");
+ else
+ osk_i2c_board_info[0].irq = gpiod_to_irq(d);
omap_register_i2c_bus(1, 400, osk_i2c_board_info,
ARRAY_SIZE(osk_i2c_board_info));
}
@@ -389,7 +447,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
.map_io = omap1_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
- .handle_irq = omap1_handle_irq,
.init_machine = osk_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,