summaryrefslogtreecommitdiff
path: root/arch/arm/mach-realview/core.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-realview/core.c')
-rw-r--r--arch/arm/mach-realview/core.c40
1 files changed, 34 insertions, 6 deletions
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 02e9fdeb8faf..2fa38df28414 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -61,12 +61,11 @@ void __iomem *gic_cpu_base_addr;
/*
* Adjust the zones if there are restrictions for DMA access.
*/
-void __init realview_adjust_zones(int node, unsigned long *size,
- unsigned long *hole)
+void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
{
unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
- if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+ if (!machine_is_realview_pbx() || size[0] <= dma_size)
return;
size[ZONE_NORMAL] = size[0] - dma_size;
@@ -232,6 +231,21 @@ static unsigned int realview_mmc_status(struct device *dev)
struct amba_device *adev = container_of(dev, struct amba_device, dev);
u32 mask;
+ if (machine_is_realview_pb1176()) {
+ static bool inserted = false;
+
+ /*
+ * The PB1176 does not have the status register,
+ * assume it is inserted at startup, then invert
+ * for each call so card insertion/removal will
+ * be detected anyway. This will not be called if
+ * GPIO on PL061 is active, which is the proper
+ * way to do this on the PB1176.
+ */
+ inserted = !inserted;
+ return inserted ? 0 : 1;
+ }
+
if (adev->res.start == REALVIEW_MMCI0_BASE)
mask = 1;
else
@@ -300,8 +314,13 @@ static struct clk ref24_clk = {
.rate = 24000000,
};
+static struct clk dummy_apb_pclk;
+
static struct clk_lookup lookups[] = {
- { /* UART0 */
+ { /* Bus clock */
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ }, { /* UART0 */
.dev_id = "dev:uart0",
.clk = &ref24_clk,
}, { /* UART1 */
@@ -313,6 +332,12 @@ static struct clk_lookup lookups[] = {
}, { /* UART3 */
.dev_id = "fpga:uart3",
.clk = &ref24_clk,
+ }, { /* UART3 is on the dev chip in PB1176 */
+ .dev_id = "dev:uart3",
+ .clk = &ref24_clk,
+ }, { /* UART4 only exists in PB1176 */
+ .dev_id = "fpga:uart4",
+ .clk = &ref24_clk,
}, { /* KMI0 */
.dev_id = "fpga:kmi0",
.clk = &ref24_clk,
@@ -322,12 +347,15 @@ static struct clk_lookup lookups[] = {
}, { /* MMC0 */
.dev_id = "fpga:mmc0",
.clk = &ref24_clk,
- }, { /* EB:CLCD */
+ }, { /* CLCD is in the PB1176 and EB DevChip */
.dev_id = "dev:clcd",
.clk = &oscvco_clk,
}, { /* PB:CLCD */
.dev_id = "issp:clcd",
.clk = &oscvco_clk,
+ }, { /* SSP */
+ .dev_id = "dev:ssp0",
+ .clk = &ref24_clk,
}
};
@@ -342,7 +370,7 @@ static int __init clk_init(void)
return 0;
}
-arch_initcall(clk_init);
+core_initcall(clk_init);
/*
* CLCD support.