summaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra/platsmp.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-tegra/platsmp.c')
-rw-r--r--arch/arm/mach-tegra/platsmp.c128
1 files changed, 54 insertions, 74 deletions
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 2c6b3d55213b..fad4226ef710 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -18,7 +18,6 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <linux/clk/tegra.h>
#include <asm/cacheflush.h>
@@ -26,53 +25,58 @@
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
-#include <mach/powergate.h>
-
#include "fuse.h"
#include "flowctrl.h"
#include "reset.h"
+#include "pmc.h"
#include "common.h"
#include "iomap.h"
-extern void tegra_secondary_startup(void);
-
static cpumask_t tegra_cpu_init_mask;
-#define EVP_CPU_RESET_VECTOR \
- (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-
static void __cpuinit tegra_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
}
-static int tegra20_power_up_cpu(unsigned int cpu)
+
+static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- /* Enable the CPU clock. */
- tegra_enable_cpu_clock(cpu);
+ cpu = cpu_logical_map(cpu);
+
+ /*
+ * Force the CPU into reset. The CPU must remain in reset when
+ * the flow controller state is cleared (which will cause the
+ * flow controller to stop driving reset if the CPU has been
+ * power-gated via the flow controller). This will have no
+ * effect on first boot of the CPU since it should already be
+ * in reset.
+ */
+ tegra_put_cpu_in_reset(cpu);
- /* Clear flow controller CSR. */
- flowctrl_write_cpu_csr(cpu, 0);
+ /*
+ * Unhalt the CPU. If the flow controller was used to
+ * power-gate the CPU this will cause the flow controller to
+ * stop driving reset. The CPU will remain in reset because the
+ * clock and reset block is now driving reset.
+ */
+ flowctrl_write_cpu_halt(cpu, 0);
+ tegra_enable_cpu_clock(cpu);
+ flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+ tegra_cpu_out_of_reset(cpu);
return 0;
}
-static int tegra30_power_up_cpu(unsigned int cpu)
+static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int ret, pwrgateid;
+ int ret;
unsigned long timeout;
- pwrgateid = tegra_cpu_powergate_id(cpu);
- if (pwrgateid < 0)
- return pwrgateid;
+ cpu = cpu_logical_map(cpu);
+ tegra_put_cpu_in_reset(cpu);
+ flowctrl_write_cpu_halt(cpu, 0);
/*
* The power up sequence of cold boot CPU and warm boot CPU
@@ -85,13 +89,13 @@ static int tegra30_power_up_cpu(unsigned int cpu)
* the IO clamps.
* For cold boot CPU, do not wait. After the cold boot CPU be
* booted, it will run to tegra_secondary_init() and set
- * tegra_cpu_init_mask which influences what tegra30_power_up_cpu()
+ * tegra_cpu_init_mask which influences what tegra30_boot_secondary()
* next time around.
*/
if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
timeout = jiffies + msecs_to_jiffies(50);
do {
- if (!tegra_powergate_is_powered(pwrgateid))
+ if (tegra_pmc_cpu_is_powered(cpu))
goto remove_clamps;
udelay(10);
} while (time_before(jiffies, timeout));
@@ -103,14 +107,14 @@ static int tegra30_power_up_cpu(unsigned int cpu)
* be un-gated by un-toggling the power gate register
* manually.
*/
- if (!tegra_powergate_is_powered(pwrgateid)) {
- ret = tegra_powergate_power_on(pwrgateid);
+ if (!tegra_pmc_cpu_is_powered(cpu)) {
+ ret = tegra_pmc_cpu_power_on(cpu);
if (ret)
return ret;
/* Wait for the power to come up. */
timeout = jiffies + msecs_to_jiffies(100);
- while (tegra_powergate_is_powered(pwrgateid)) {
+ while (tegra_pmc_cpu_is_powered(cpu)) {
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
udelay(10);
@@ -123,57 +127,34 @@ remove_clamps:
udelay(10);
/* Remove I/O clamps. */
- ret = tegra_powergate_remove_clamping(pwrgateid);
- udelay(10);
+ ret = tegra_pmc_cpu_remove_clamping(cpu);
+ if (ret)
+ return ret;
- /* Clear flow controller CSR. */
- flowctrl_write_cpu_csr(cpu, 0);
+ udelay(10);
+ flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+ tegra_cpu_out_of_reset(cpu);
return 0;
}
-static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int status;
-
cpu = cpu_logical_map(cpu);
+ return tegra_pmc_cpu_power_on(cpu);
+}
- /*
- * Force the CPU into reset. The CPU must remain in reset when the
- * flow controller state is cleared (which will cause the flow
- * controller to stop driving reset if the CPU has been power-gated
- * via the flow controller). This will have no effect on first boot
- * of the CPU since it should already be in reset.
- */
- tegra_put_cpu_in_reset(cpu);
-
- /*
- * Unhalt the CPU. If the flow controller was used to power-gate the
- * CPU this will cause the flow controller to stop driving reset.
- * The CPU will remain in reset because the clock and reset block
- * is now driving reset.
- */
- flowctrl_write_cpu_halt(cpu, 0);
-
- switch (tegra_chip_id) {
- case TEGRA20:
- status = tegra20_power_up_cpu(cpu);
- break;
- case TEGRA30:
- status = tegra30_power_up_cpu(cpu);
- break;
- default:
- status = -EINVAL;
- break;
- }
-
- if (status)
- goto done;
-
- /* Take the CPU out of reset. */
- tegra_cpu_out_of_reset(cpu);
-done:
- return status;
+static int __cpuinit tegra_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ return tegra20_boot_secondary(cpu, idle);
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ return tegra30_boot_secondary(cpu, idle);
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
+ return tegra114_boot_secondary(cpu, idle);
+
+ return -EINVAL;
}
static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
@@ -192,6 +173,5 @@ struct smp_operations tegra_smp_ops __initdata = {
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = tegra_cpu_kill,
.cpu_die = tegra_cpu_die,
- .cpu_disable = tegra_cpu_disable,
#endif
};