summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500/board-mop500.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.c')
-rw-r--r--arch/arm/mach-ux500/board-mop500.c228
1 files changed, 62 insertions, 166 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index cac83a694880..a1c9ea1a66df 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,25 +13,26 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ab8500.h>
-#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/tc3589x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/pincfg.h>
#include <plat/i2c.h>
-#include <plat/ske.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
+#include "devices-db8500.h"
#include "pins-db8500.h"
#include "board-mop500.h"
@@ -69,22 +70,12 @@ static pin_cfg_t mop500_pins[] = {
GPIO166_KP_O2,
GPIO167_KP_O1,
GPIO168_KP_O0,
-};
-static void ab4500_spi_cs_control(u32 command)
-{
- /* set the FRM signal, which is CS - TODO */
-}
+ /* GPIO_EXP_INT */
+ GPIO217_GPIO,
-struct pl022_config_chip ab4500_chip_info = {
- .com_mode = INTERRUPT_TRANSFER,
- .iface = SSP_INTERFACE_MOTOROLA_SPI,
- /* we can act as master only */
- .hierarchy = SSP_MASTER,
- .slave_tx_disable = 0,
- .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
- .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
- .cs_control = ab4500_spi_cs_control,
+ /* STMPE1601 IRQ */
+ GPIO218_GPIO | PIN_INPUT_PULLUP,
};
static struct ab8500_platform_data ab8500_platdata = {
@@ -93,9 +84,9 @@ static struct ab8500_platform_data ab8500_platdata = {
static struct resource ab8500_resources[] = {
[0] = {
- .start = IRQ_AB8500,
- .end = IRQ_AB8500,
- .flags = IORESOURCE_IRQ
+ .start = IRQ_DB8500_AB8500,
+ .end = IRQ_DB8500_AB8500,
+ .flags = IORESOURCE_IRQ
}
};
@@ -109,19 +100,6 @@ struct platform_device ab8500_device = {
.resource = ab8500_resources,
};
-static struct spi_board_info ab8500_spi_devices[] = {
- {
- .modalias = "ab8500-spi",
- .controller_data = &ab4500_chip_info,
- .platform_data = &ab8500_platdata,
- .max_speed_hz = 12000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_3,
- .irq = IRQ_DB8500_AB8500,
- },
-};
-
static struct pl022_ssp_controller ssp0_platform_data = {
.bus_id = 0,
/* pl022 not yet supports dma */
@@ -132,6 +110,34 @@ static struct pl022_ssp_controller ssp0_platform_data = {
.num_chipselect = 5,
};
+/*
+ * TC35892
+ */
+
+static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
+{
+ mop500_sdi_tc35892_init();
+}
+
+static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
+ .gpio_base = MOP500_EGPIO(0),
+ .setup = mop500_tc35892_init,
+};
+
+static struct tc3589x_platform_data mop500_tc35892_data = {
+ .block = TC3589x_BLOCK_GPIO,
+ .gpio = &mop500_tc35892_gpio_data,
+ .irq_base = MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct i2c_board_info mop500_i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("tc3589x", 0x42),
+ .irq = NOMADIK_GPIO_TO_IRQ(217),
+ .platform_data = &mop500_tc35892_data,
+ },
+};
+
#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
static struct nmk_i2c_controller u8500_i2c##id##_data = { \
/* \
@@ -161,159 +167,49 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-static struct amba_device *amba_devs[] __initdata = {
- &ux500_uart0_device,
- &ux500_uart1_device,
- &ux500_uart2_device,
- &u8500_ssp0_device,
-};
-
-static const unsigned int ux500_keymap[] = {
- KEY(2, 5, KEY_END),
- KEY(4, 1, KEY_POWER),
- KEY(3, 5, KEY_VOLUMEDOWN),
- KEY(1, 3, KEY_3),
- KEY(5, 2, KEY_RIGHT),
- KEY(5, 0, KEY_9),
-
- KEY(0, 5, KEY_MENU),
- KEY(7, 6, KEY_ENTER),
- KEY(4, 5, KEY_0),
- KEY(6, 7, KEY_2),
- KEY(3, 4, KEY_UP),
- KEY(3, 3, KEY_DOWN),
-
- KEY(6, 4, KEY_SEND),
- KEY(6, 2, KEY_BACK),
- KEY(4, 2, KEY_VOLUMEUP),
- KEY(5, 5, KEY_1),
- KEY(4, 3, KEY_LEFT),
- KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data ux500_keymap_data = {
- .keymap = ux500_keymap,
- .keymap_size = ARRAY_SIZE(ux500_keymap),
-};
+static void __init mop500_i2c_init(void)
+{
+ db8500_add_i2c0(&u8500_i2c0_data);
+ db8500_add_i2c1(&u8500_i2c1_data);
+ db8500_add_i2c2(&u8500_i2c2_data);
+ db8500_add_i2c3(&u8500_i2c3_data);
+}
-/*
- * Nomadik SKE keypad
- */
-#define ROW_PIN_I0 164
-#define ROW_PIN_I1 163
-#define ROW_PIN_I2 162
-#define ROW_PIN_I3 161
-#define ROW_PIN_I4 156
-#define ROW_PIN_I5 155
-#define ROW_PIN_I6 154
-#define ROW_PIN_I7 153
-#define COL_PIN_O0 168
-#define COL_PIN_O1 167
-#define COL_PIN_O2 166
-#define COL_PIN_O3 165
-#define COL_PIN_O4 160
-#define COL_PIN_O5 159
-#define COL_PIN_O6 158
-#define COL_PIN_O7 157
-
-#define SKE_KPD_MAX_ROWS 8
-#define SKE_KPD_MAX_COLS 8
-
-static int ske_kp_rows[] = {
- ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
- ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
};
-/*
- * ske_set_gpio_row: request and set gpio rows
- */
-static int ske_set_gpio_row(int gpio)
+static void __init mop500_spi_init(void)
{
- int ret;
-
- ret = gpio_request(gpio, "ske-kp");
- if (ret < 0) {
- pr_err("ske_set_gpio_row: gpio request failed\n");
- return ret;
- }
-
- ret = gpio_direction_output(gpio, 1);
- if (ret < 0) {
- pr_err("ske_set_gpio_row: gpio direction failed\n");
- gpio_free(gpio);
- }
-
- return ret;
+ db8500_add_ssp0(&ssp0_platform_data);
}
-/*
- * ske_kp_init - enable the gpio configuration
- */
-static int ske_kp_init(void)
+static void __init mop500_uart_init(void)
{
- int ret, i;
-
- for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
- ret = ske_set_gpio_row(ske_kp_rows[i]);
- if (ret < 0) {
- pr_err("ske_kp_init: failed init\n");
- return ret;
- }
- }
-
- return 0;
+ db8500_add_uart0();
+ db8500_add_uart1();
+ db8500_add_uart2();
}
-static struct ske_keypad_platform_data ske_keypad_board = {
- .init = ske_kp_init,
- .keymap_data = &ux500_keymap_data,
- .no_autorepeat = true,
- .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */
- .kcol = SKE_KPD_MAX_COLS,
- .debounce_ms = 40, /* in millsecs */
-};
-
-
-
-/* add any platform devices here - TODO */
-static struct platform_device *platform_devs[] __initdata = {
- &u8500_i2c0_device,
- &ux500_i2c1_device,
- &ux500_i2c2_device,
- &ux500_i2c3_device,
- &ux500_ske_keypad_device,
-};
-
static void __init u8500_init_machine(void)
{
- int i;
-
u8500_init_devices();
nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
- u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
- ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
- ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
- ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
- ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board;
-
- u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
-
- /* Register the active AMBA devices on this board */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+ mop500_i2c_init();
mop500_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ mop500_keypad_init();
+
+ platform_device_register(&ab8500_device);
- /* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */
- if (cpu_is_u8500ed() || cpu_is_u8500v10())
- spi_register_board_info(ab8500_spi_devices,
- ARRAY_SIZE(ab8500_spi_devices));
- else /* If HW is v.1.1 or later use I2C to access AB8500 */
- platform_device_register(&ab8500_device);
+ i2c_register_board_info(0, mop500_i2c0_devices,
+ ARRAY_SIZE(mop500_i2c0_devices));
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")