summaryrefslogtreecommitdiff
path: root/arch/arm/plat-pxa
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-pxa')
-rw-r--r--arch/arm/plat-pxa/include/plat/ssp.h187
-rw-r--r--arch/arm/plat-pxa/ssp.c2
2 files changed, 1 insertions, 188 deletions
diff --git a/arch/arm/plat-pxa/include/plat/ssp.h b/arch/arm/plat-pxa/include/plat/ssp.h
deleted file mode 100644
index 21c12ca80738..000000000000
--- a/arch/arm/plat-pxa/include/plat/ssp.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * ssp.h
- *
- * Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver supports the following PXA CPU/SSP ports:-
- *
- * PXA250 SSP
- * PXA255 SSP, NSSP
- * PXA26x SSP, NSSP, ASSP
- * PXA27x SSP1, SSP2, SSP3
- * PXA3xx SSP1, SSP2, SSP3, SSP4
- */
-
-#ifndef __ASM_ARCH_SSP_H
-#define __ASM_ARCH_SSP_H
-
-#include <linux/list.h>
-#include <linux/io.h>
-
-/*
- * SSP Serial Port Registers
- * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
- * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
- */
-
-#define SSCR0 (0x00) /* SSP Control Register 0 */
-#define SSCR1 (0x04) /* SSP Control Register 1 */
-#define SSSR (0x08) /* SSP Status Register */
-#define SSITR (0x0C) /* SSP Interrupt Test Register */
-#define SSDR (0x10) /* SSP Data Write/Data Read Register */
-
-#define SSTO (0x28) /* SSP Time Out Register */
-#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */
-#define SSTSA (0x30) /* SSP Tx Timeslot Active */
-#define SSRSA (0x34) /* SSP Rx Timeslot Active */
-#define SSTSS (0x38) /* SSP Timeslot Status */
-#define SSACD (0x3C) /* SSP Audio Clock Divider */
-#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */
-
-/* Common PXA2xx bits first */
-#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
-#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
-#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
-#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
-#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
-#define SSCR0_National (0x2 << 4) /* National Microwire */
-#define SSCR0_ECS (1 << 6) /* External clock select */
-#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
-#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */
-
-/* PXA27x, PXA3xx */
-#define SSCR0_EDSS (1 << 20) /* Extended data size select */
-#define SSCR0_NCS (1 << 21) /* Network clock select */
-#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
-#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */
-#define SSCR0_ACS (1 << 30) /* Audio clock select */
-#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
-
-
-#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
-#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
-#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
-
-#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
-#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
-#define SSSR_BSY (1 << 4) /* SSP Busy */
-#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
-#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
-#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
-#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */
-#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */
-
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
-#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
-#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
-#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
-#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
-#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
-#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
-#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
-#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
-#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
-#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
-#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */
-#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
-#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
-#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
-
-#define SSSR_BCE (1 << 23) /* Bit Count Error */
-#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
-#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
-#define SSSR_EOC (1 << 20) /* End Of Chain */
-#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
-#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
-
-
-#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
-#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
-#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
-#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
-#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
-#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
-#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
-#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
-#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
-
-/* PXA3xx */
-#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */
-#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */
-#define SSPSP_TIMING_MASK (0x7f8001f0)
-
-#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
-#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
-#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */
-
-enum pxa_ssp_type {
- SSP_UNDEFINED = 0,
- PXA25x_SSP, /* pxa 210, 250, 255, 26x */
- PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
- PXA27x_SSP,
- PXA168_SSP,
-};
-
-struct ssp_device {
- struct platform_device *pdev;
- struct list_head node;
-
- struct clk *clk;
- void __iomem *mmio_base;
- unsigned long phys_base;
-
- const char *label;
- int port_id;
- int type;
- int use_count;
- int irq;
- int drcmr_rx;
- int drcmr_tx;
-};
-
-/**
- * pxa_ssp_write_reg - Write to a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to write to
- * @val: Value to be written.
- */
-static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
-{
- __raw_writel(val, dev->mmio_base + reg);
-}
-
-/**
- * pxa_ssp_read_reg - Read from a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to read from
- */
-static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
-{
- return __raw_readl(dev->mmio_base + reg);
-}
-
-struct ssp_device *pxa_ssp_request(int port, const char *label);
-void pxa_ssp_free(struct ssp_device *);
-#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index c6357e554aba..58b79809d20c 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -28,11 +28,11 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/spi/pxa2xx_spi.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <plat/ssp.h>
static DEFINE_MUTEX(ssp_lock);
static LIST_HEAD(ssp_list);