diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 159 |
1 files changed, 158 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 7bf6f81e87b4..6357f3d96ccd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -8,6 +8,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> #include <dt-bindings/pwm/pwm.h> #include "imx8mp-tqma8mpql.dtsi" @@ -48,6 +49,27 @@ status = "disabled"; }; + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwmfan>; + fan-supply = <®_pwm_fan>; + #cooling-cells = <2>; + /* typical 25 kHz -> 40.000 nsec */ + pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>; + cooling-levels = <0 32 64 128 196 240>; + pulses-per-revolution = <2>; + interrupt-parent = <&gpio5>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -108,6 +130,18 @@ status = "disabled"; }; + reg_pwm_fan: regulator-pwm-fan { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regpwmfan>; + regulator-name = "FAN_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vcc_12v0>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -165,6 +199,47 @@ linux,cma-default; }; }; + + thermal-zones { + soc-thermal { + trips { + soc_active0: trip-active0 { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + + soc_active1: trip-active1 { + temperature = <48000>; + hysteresis = <3000>; + type = "active"; + }; + + soc_active2: trip-active2 { + temperature = <60000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&soc_active0>; + cooling-device = <&fan0 1 1>; + }; + + map2 { + trip = <&soc_active1>; + cooling-device = <&fan0 2 2>; + }; + + map3 { + trip = <&soc_active2>; + cooling-device = <&fan0 3 3>; + }; + }; + }; + }; }; &ecspi1 { @@ -340,9 +415,16 @@ "", "", "", "", "", "", "", "", "", "", "DP_IRQ", "DSI_EN", - "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "", + "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "", "", "", "", "FAN_PWR", "RTC_EVENT#", "CODEC_RST#", "", ""; + + pcie-refclkreq-hog { + gpio-hog; + gpios = <22 0>; + output-high; + line-name = "PCIE_REFCLK_OE#"; + }; }; &gpio5 { @@ -377,6 +459,13 @@ pagesize = <16>; vcc-supply = <®_vcc_3v3>; }; + + pcieclk: clock-generator@6a { + compatible = "renesas,9fgv0241"; + reg = <0x6a>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; }; &i2c4 { @@ -407,6 +496,25 @@ interrupts = <28 IRQ_TYPE_EDGE_FALLING>; }; +&pcie_phy { + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + clocks = <&pcieclk 0>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + status = "okay"; +}; + &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; @@ -461,11 +569,23 @@ status = "okay"; }; +&usb3_1 { + fsl,disable-port-power-control; + fsl,permanently-attached; + dr_mode = "host"; + status = "okay"; +}; + &usb3_phy0 { vbus-supply = <®_vcc_5v0>; status = "okay"; }; +&usb3_phy1 { + vbus-supply = <®_vcc_5v0>; + status = "okay"; +}; + &usb_dwc3_0 { /* dual role is implemented, but not a full featured OTG */ hnp-disable; @@ -486,6 +606,31 @@ }; }; +&usb_dwc3_1 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_vcc_3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_vcc_3v3>; + }; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; @@ -685,10 +830,18 @@ fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x14>; }; + pinctrl_pwmfan: pwmfangrp { + fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x80>; /* FAN RPM */ + }; + pinctrl_reg12v0: reg12v0grp { fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x140>; /* VCC12V enable */ }; + pinctrl_regpwmfan: regpwmfangrp { + fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x80>; + }; + /* X61 */ pinctrl_uart1: uart1grp { fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>, @@ -720,6 +873,10 @@ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c0>; }; + pinctrl_usbhub: usbhubgrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x10>; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>, <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>, |