summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts136
1 files changed, 21 insertions, 115 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index f1dd625e1822..9560ba632c6f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -14,7 +14,9 @@
chassis-type = "handset";
aliases {
- serial0 = &blsp1_uart2;
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
};
chosen {
@@ -41,7 +43,7 @@
button-volume-up {
label = "Volume Up";
- gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
@@ -53,7 +55,7 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
+ gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -62,8 +64,8 @@
flash-led-controller {
compatible = "sgmicro,sgm3140";
- flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
- enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+ flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&camera_flash_default>;
@@ -122,7 +124,7 @@
* to the BMC156. However, there are two pads next to the chip
* that can be shorted to make it work if needed.
*
- * interrupt-parent = <&msmgpio>;
+ * interrupt-parent = <&tlmm>;
* interrupts = <116 IRQ_TYPE_EDGE_RISING>;
*/
@@ -141,7 +143,7 @@
compatible = "bosch,bmc156_magn";
reg = <0x12>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <113 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
@@ -156,7 +158,7 @@
reg = <0x23>;
proximity-near-level = <75>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
@@ -170,7 +172,7 @@
compatible = "bosch,bmg160";
reg = <0x68>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <23 IRQ_TYPE_EDGE_RISING>,
<22 IRQ_TYPE_EDGE_RISING>;
@@ -191,7 +193,7 @@
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&reg_ctp>;
@@ -214,7 +216,7 @@
};
};
-&blsp1_uart2 {
+&blsp_uart2 {
status = "okay";
};
@@ -223,6 +225,13 @@
linux,code = <KEY_VOLUMEDOWN>;
};
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
&pm8916_usbin {
status = "okay";
};
@@ -267,110 +276,7 @@
compatible = "qcom,wcn3620";
};
-&smd_rpm_regulators {
- vdd_l1_l2_l3-supply = <&pm8916_s3>;
- vdd_l4_l5_l6-supply = <&pm8916_s4>;
- vdd_l7-supply = <&pm8916_s4>;
-
- s3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1300000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2100000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l8 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2900000>;
- };
-
- l9 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l10 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l11 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l13 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l16 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l18 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-};
-
-&msmgpio {
+&tlmm {
accel_int_default: accel-int-default-state {
pins = "gpio116";
function = "gpio";