diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts | 151 |
1 files changed, 25 insertions, 126 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 1a41a4db874d..3637e7d80d0a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -28,7 +28,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -53,13 +55,13 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -74,7 +76,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -87,7 +89,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -100,7 +102,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -113,7 +115,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -122,8 +124,8 @@ i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -135,7 +137,7 @@ compatible = "siliconmitus,sm5504-muic"; reg = <0x14>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -145,8 +147,8 @@ i2c-tkey { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&tkey_i2c_default>; @@ -158,7 +160,7 @@ compatible = "coreriver,tc360-touchkey"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <98 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <®_touch_key>; @@ -174,8 +176,8 @@ i2c-nfc { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&nfc_i2c_default>; @@ -187,11 +189,11 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x2b>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; @@ -206,7 +208,7 @@ compatible = "st,lsm6ds3"; reg = <0x6b>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -230,7 +232,7 @@ compatible = "richtek,rt5033-battery"; reg = <0x35>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -245,7 +247,7 @@ compatible = "zinitix,bt541"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <540>; @@ -259,7 +261,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -320,110 +322,7 @@ compatible = "qcom,wcn3660b"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; |