diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts | 141 |
1 files changed, 28 insertions, 113 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index ac56c7595f78..733917531218 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -16,7 +16,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -25,8 +27,8 @@ flash-led-controller { compatible = "ocs,ocp8110"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_flash_default>; @@ -47,14 +49,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -67,7 +69,7 @@ compatible = "invensense,mpu6880"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -90,10 +92,10 @@ compatible = "edt,edt-ft5506"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -140,7 +142,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -149,6 +151,22 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + /* + * L16 is only used for AW2013 which is fine with 2.5-3.3V. + * Use the recommended typical voltage of 2.8V as minimum. + */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &pm8916_vib { status = "okay"; }; @@ -188,110 +206,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; |