summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sc8180x.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8180x.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/sc8180x.dtsi493
1 files changed, 344 insertions, 149 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 053f7861c3ce..0e9429684dd9 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc8180x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
@@ -1777,6 +1778,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -1880,7 +1891,7 @@
power-domains = <&gcc PCIE_3_GDSC>;
interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
- <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_3 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
phys = <&pcie3_phy>;
@@ -1888,6 +1899,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie3_phy: phy@1c0c000 {
@@ -1992,7 +2013,7 @@
power-domains = <&gcc PCIE_1_GDSC>;
interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
- <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_1 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
phys = <&pcie1_phy>;
@@ -2000,6 +2021,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c16000 {
@@ -2104,7 +2135,7 @@
power-domains = <&gcc PCIE_2_GDSC>;
interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
- <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_2 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
phys = <&pcie2_phy>;
@@ -2112,6 +2143,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie2_phy: phy@1c1c000 {
@@ -2205,18 +2246,13 @@
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
#phy-cells = <0>;
status = "disabled";
};
- ipa_virt: interconnect@1e00000 {
- compatible = "qcom,sc8180x-ipa-virt";
- reg = <0 0x01e00000 0 0x1000>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -2225,7 +2261,6 @@
gpu: gpu@2c00000 {
compatible = "qcom,adreno-680.1", "qcom,adreno";
- #stream-id-cells = <16>;
reg = <0 0x02c00000 0 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
@@ -2472,28 +2507,53 @@
status = "disabled";
};
- usb_prim_qmpphy: phy@88e9000 {
+ usb_mp_hsphy0: phy@88e4000 {
+ compatible = "qcom,sc8180x-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e4000 0 0x400>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_MP0_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_hsphy1: phy@88e5000 {
+ compatible = "qcom,sc8180x-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e5000 0 0x400>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_MP1_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_prim_qmpphy: phy@88e8000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
- reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x38>,
- <0 0x088ea000 0 0x40>;
- reg-names = "reg-base", "dp_com";
+ reg = <0 0x088e8000 0 0x3000>;
+
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "aux",
- "ref_clk_src",
"ref",
- "com_aux";
+ "com_aux",
+ "usb3_pipe";
+
resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,
<&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
reset-names = "phy", "common";
#clock-cells = <1>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #phy-cells = <1>;
status = "disabled";
@@ -2507,59 +2567,94 @@
usb_prim_qmpphy_out: endpoint {};
};
+ port@1 {
+ reg = <1>;
+
+ usb_prim_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_prim_dwc3_ss>;
+ };
+ };
+
port@2 {
reg = <2>;
usb_prim_qmpphy_dp_in: endpoint {};
};
};
+ };
- usb_prim_ssphy: usb3-phy@88e9200 {
- reg = <0 0x088e9200 0 0x200>,
- <0 0x088e9400 0 0x200>,
- <0 0x088e9c00 0 0x218>,
- <0 0x088e9600 0 0x200>,
- <0 0x088e9800 0 0x200>,
- <0 0x088e9a00 0 0x100>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_prim_phy_pipe_clk_src";
- };
+ usb_mp_qmpphy0: phy@88eb000 {
+ compatible = "qcom,sc8180x-qmp-usb3-uni-phy";
+ reg = <0 0x088eb000 0 0x1000>;
- usb_prim_dpphy: dp-phy@88ea200 {
- reg = <0 0x088ea200 0 0x200>,
- <0 0x088ea400 0 0x200>,
- <0 0x088eaa00 0 0x200>,
- <0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb2_phy0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy1: phy@88ec000 {
+ compatible = "qcom,sc8180x-qmp-usb3-uni-phy";
+ reg = <0 0x088ec000 0 0x1000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb2_phy1_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
};
usb_sec_qmpphy: phy@88ee000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
- reg = <0 0x088ee000 0 0x18c>,
- <0 0x088ed000 0 0x10>,
- <0 0x088ef000 0 0x40>;
- reg-names = "reg-base", "dp_com";
+ reg = <0 0x088ed000 0 0x3000>;
+
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "aux",
- "ref_clk_src",
"ref",
- "com_aux";
+ "com_aux",
+ "usb3_pipe";
resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>,
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
#clock-cells = <1>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #phy-cells = <1>;
status = "disabled";
@@ -2573,46 +2668,32 @@
usb_sec_qmpphy_out: endpoint {};
};
+ port@1 {
+ reg = <1>;
+
+ usb_sec_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_sec_dwc3_ss>;
+ };
+ };
+
port@2 {
reg = <2>;
usb_sec_qmpphy_dp_in: endpoint {};
};
};
-
- usb_sec_ssphy: usb3-phy@88e9200 {
- reg = <0 0x088ee200 0 0x200>,
- <0 0x088ee400 0 0x200>,
- <0 0x088eec00 0 0x218>,
- <0 0x088ee600 0 0x200>,
- <0 0x088ee800 0 0x200>,
- <0 0x088eea00 0 0x100>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_sec_phy_pipe_clk_src";
- };
-
- usb_sec_dpphy: dp-phy@88ef200 {
- reg = <0 0x088ef200 0 0x200>,
- <0 0x088ef400 0 0x200>,
- <0 0x088efa00 0 0x200>,
- <0 0x088ef600 0 0x200>,
- <0 0x088ef800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- clock-output-names = "qmp_dptx1_phy_pll_link_clk",
- "qmp_dptx1_phy_pll_vco_div_clk";
- };
};
system-cache-controller@9200000 {
compatible = "qcom,sc8180x-llcc";
- reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
- <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
- <0 0x09600000 0 0x50000>;
+ reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+ <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+ <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+ <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+ <0 0x09600000 0 0x58000>;
reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
- "llcc3_base", "llcc_broadcast_base";
+ "llcc3_base", "llcc4_base", "llcc5_base",
+ "llcc6_base", "llcc7_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -2623,17 +2704,89 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ usb_mp: usb@a4f8800 {
+ compatible = "qcom,sc8180x-dwc3-mp", "qcom,dwc3";
+ reg = <0 0x0a4f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_SLEEP_CLK>,
+ <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ interconnects = <&aggre1_noc MASTER_USB3_2 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_2 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 59 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 46 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 71 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 68 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event_1", "pwr_event_2",
+ "hs_phy_1", "hs_phy_2",
+ "dp_hs_phy_1", "dm_hs_phy_1",
+ "dp_hs_phy_2", "dm_hs_phy_2",
+ "ss_phy_1", "ss_phy_2";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ resets = <&gcc GCC_USB30_MP_BCR>;
+
+ status = "disabled";
+
+ usb_mp_dwc3: usb@a400000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a400000 0 0xcd00>;
+ interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x60 0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_mp_hsphy0>,
+ <&usb_mp_qmpphy0>,
+ <&usb_mp_hsphy1>,
+ <&usb_mp_qmpphy1>;
+ phy-names = "usb2-0",
+ "usb3-0",
+ "usb2-1",
+ "usb3-1";
+ dr_mode = "host";
+ };
+ };
+
usb_prim: usb@a6f8800 {
compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
- interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
<&pdc 8 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "hs_phy_irq",
- "ss_phy_irq",
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
"dm_hs_phy_irq",
- "dp_hs_phy_irq";
+ "ss_phy_irq";
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -2672,11 +2825,26 @@
iommus = <&apps_smmu 0x140 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
+ phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
- port {
- usb_prim_role_switch: endpoint {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_prim_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_prim_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_prim_qmpphy_usb_ss_in>;
+ };
};
};
};
@@ -2700,12 +2868,17 @@
"xo";
resets = <&gcc GCC_USB30_SEC_BCR>;
power-domains = <&gcc USB30_SEC_GDSC>;
- interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
+
+ interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
<&pdc 10 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ <&pdc 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>;
@@ -2729,11 +2902,26 @@
iommus = <&apps_smmu 0x160 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
+ phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
- port {
- usb_sec_role_switch: endpoint {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_sec_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_sec_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_sec_qmpphy_usb_ss_in>;
+ };
};
};
};
@@ -2805,7 +2993,7 @@
power-domains = <&rpmhpd SC8180X_MMCX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
ports {
#address-cells = <1>;
@@ -2878,7 +3066,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -2964,7 +3152,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
@@ -3030,7 +3218,8 @@
reg = <0 0xae90000 0 0x200>,
<0 0xae90200 0 0x200>,
<0 0xae90400 0 0x600>,
- <0 0xae90a00 0 0x400>;
+ <0 0xae90a00 0 0x400>,
+ <0 0xae91000 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3046,9 +3235,10 @@
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
- assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>;
+ assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
- phys = <&usb_prim_dpphy>;
+ phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
@@ -3106,7 +3296,8 @@
reg = <0 0xae98000 0 0x200>,
<0 0xae98200 0 0x200>,
<0 0xae98400 0 0x600>,
- <0 0xae98a00 0 0x400>;
+ <0 0xae98a00 0 0x400>,
+ <0 0xae99000 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <13>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3122,9 +3313,10 @@
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
- assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>;
+ assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
- phys = <&usb_sec_dpphy>;
+ phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
@@ -3267,21 +3459,27 @@
compatible = "qcom,sc8180x-dispcc";
reg = <0 0x0af00000 0 0x20000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&sleep_clk>,
- <&usb_prim_dpphy 0>,
- <&usb_prim_dpphy 1>,
- <&usb_sec_dpphy 0>,
- <&usb_sec_dpphy 1>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&edp_phy 0>,
- <&edp_phy 1>;
+ <&edp_phy 1>,
+ <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
clock-names = "bi_tcxo",
- "sleep_clk",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
"dp_phy_pll_vco_div_clk",
- "dptx1_phy_pll_link_clk",
- "dptx1_phy_pll_vco_div_clk",
"edp_phy_pll_link_clk",
- "edp_phy_pll_vco_div_clk";
+ "edp_phy_pll_vco_div_clk",
+ "dptx1_phy_pll_link_clk",
+ "dptx1_phy_pll_vco_div_clk";
power-domains = <&rpmhpd SC8180X_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
@@ -3327,7 +3525,6 @@
mboxes = <&apss_shared 0>;
#clock-cells = <0>;
- #power-domain-cells = <1>;
};
sram@c3f0000 {
@@ -3730,7 +3927,6 @@
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
@@ -3745,7 +3941,6 @@
cpu1-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 2>;
@@ -3760,7 +3955,6 @@
cpu2-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
@@ -3775,7 +3969,6 @@
cpu3-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
@@ -3790,7 +3983,6 @@
cpu4-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
@@ -3805,7 +3997,6 @@
cpu5-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
@@ -3820,7 +4011,6 @@
cpu6-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
@@ -3835,7 +4025,6 @@
cpu7-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
@@ -3850,7 +4039,6 @@
cpu4-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
@@ -3865,7 +4053,6 @@
cpu5-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 12>;
@@ -3880,7 +4067,6 @@
cpu6-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 13>;
@@ -3895,7 +4081,6 @@
cpu7-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 14>;
@@ -3910,7 +4095,6 @@
aoss0-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 0>;
@@ -3925,7 +4109,6 @@
cluster0-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
@@ -3940,7 +4123,6 @@
cluster1-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 6>;
@@ -3955,7 +4137,6 @@
gpu-top-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens0 15>;
@@ -3968,16 +4149,27 @@
trips {
gpu_top_alert0: trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
temperature = <90000>;
- hysteresis = <2000>;
+ hysteresis = <1000>;
type = "hot";
};
+
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
};
};
aoss1-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 0>;
@@ -3992,7 +4184,6 @@
wlan-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 1>;
@@ -4007,7 +4198,6 @@
video-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 2>;
@@ -4022,7 +4212,6 @@
mem-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
@@ -4037,7 +4226,6 @@
q6-hvx-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 4>;
@@ -4052,7 +4240,6 @@
camera-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 5>;
@@ -4067,7 +4254,6 @@
compute-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 6>;
@@ -4082,7 +4268,6 @@
mdm-dsp-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 7>;
@@ -4097,7 +4282,6 @@
npu-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 8>;
@@ -4112,7 +4296,6 @@
gpu-bottom-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens1 11>;
@@ -4125,10 +4308,22 @@
trips {
gpu_bottom_alert0: trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
temperature = <90000>;
- hysteresis = <2000>;
+ hysteresis = <1000>;
type = "hot";
};
+
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
};
};
};
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-01 01:56:47 +0300