diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 346 |
1 files changed, 308 insertions, 38 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 15ae94c1602d..6a28cab97189 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -100,6 +100,8 @@ #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>, + <&tlmm 49 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -115,7 +117,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_0_role_switch>; + remote-endpoint = <&usb_0_dwc3_hs>; }; }; @@ -150,7 +152,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_1_role_switch>; + remote-endpoint = <&usb_1_dwc3_hs>; }; }; @@ -295,9 +297,30 @@ }; thermal-zones { + pm8008-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; + thermal-sensors = <&pmk8280_adc_tm 5>; trips { @@ -414,6 +437,13 @@ regulator-always-on; }; + vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l3b: ldo3 { regulator-name = "vreg_l3b"; regulator-min-microvolt = <1200000>; @@ -464,6 +494,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l12c: ldo12 { regulator-name = "vreg_l12c"; regulator-min-microvolt = <1800000>; @@ -497,6 +534,13 @@ vdd-l6-l9-l10-supply = <&vreg_s12b>; vdd-l8-supply = <&vreg_s12b>; + vreg_l2d: ldo2 { + regulator-name = "vreg_l2d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l3d: ldo3 { regulator-name = "vreg_l3d"; regulator-min-microvolt = <1200000>; @@ -525,12 +569,77 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l8d: ldo8 { + regulator-name = "vreg_l8d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l9d: ldo9 { regulator-name = "vreg_l9d"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l10d: ldo10 { + regulator-name = "vreg_l10d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&camss { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; + + ports { + port@0 { + csiphy0_lanes01_ep: endpoint@0 { + reg = <0>; + clock-lanes = <7>; + data-lanes = <0 1>; + remote-endpoint = <&ov5675_ep>; + }; + }; + }; +}; + +&cci2 { + status = "okay"; +}; + +&cci2_i2c1 { + camera@10 { + compatible = "ovti,ov5675"; + reg = <0x10>; + + reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_rgb_default>; + + clocks = <&camcc CAMCC_MCLK3_CLK>; + + orientation = <0>; /* Front facing */ + + avdd-supply = <&vreg_l6q>; + dvdd-supply = <&vreg_l2q>; + dovdd-supply = <&vreg_l7q>; + + port { + ov5675_ep: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + remote-endpoint = <&csiphy0_lanes01_ep>; + }; + }; + }; }; @@ -618,21 +727,101 @@ status = "okay"; - /* FIXME: verify */ touchscreen@10 { - compatible = "hid-over-i2c"; + compatible = "elan,ekth5015m", "elan,ekth6915"; reg = <0x10>; - hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_s10b>; + reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + no-reset-on-power-off; + + vcc33-supply = <&vreg_misc_3p3>; + vccio-supply = <&vreg_misc_3p3>; pinctrl-names = "default"; pinctrl-0 = <&ts0_default>; }; }; +&i2c11 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_default>; + + status = "okay"; + + pm8008: pmic@c { + compatible = "qcom,pm8008"; + reg = <0xc>; + + interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s11b>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1q: ldo1 { + regulator-name = "vreg_l1q"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2q: ldo2 { + regulator-name = "vreg_l2q"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3q: ldo3 { + regulator-name = "vreg_l3q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l4q: ldo4 { + regulator-name = "vreg_l4q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l5q: ldo5 { + regulator-name = "vreg_l5q"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l6q: ldo6 { + regulator-name = "vreg_l6q"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7q: ldo7 { + regulator-name = "vreg_l7q"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + &i2c21 { clock-frequency = <400000>; @@ -731,22 +920,14 @@ pinctrl-0 = <&pcie4_default>; status = "okay"; +}; - pcie@0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - bus-range = <0x01 0xff>; - - wifi@0 { - compatible = "pci17cb,1103"; - reg = <0x10000 0x0 0x0 0x0 0x0>; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; - qcom,ath11k-calibration-variant = "LE_X13S"; - }; + qcom,ath11k-calibration-variant = "LE_X13S"; }; }; @@ -1102,6 +1283,10 @@ dr_mode = "host"; }; +&usb_0_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_0_hsphy { vdda-pll-supply = <&vreg_l9d>; vdda18-supply = <&vreg_l1c>; @@ -1127,10 +1312,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_0_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_1 { status = "okay"; }; @@ -1139,6 +1320,10 @@ dr_mode = "host"; }; +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &usb_1_hsphy { vdda-pll-supply = <&vreg_l4b>; vdda18-supply = <&vreg_l1c>; @@ -1164,8 +1349,54 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_1_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; +&usb_2 { + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l1b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_2_hsphy1 { + vdda-pll-supply = <&vreg_l8d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_2_hsphy2 { + vdda-pll-supply = <&vreg_l10d>; + vdda18-supply = <&vreg_l8c>; + vdda33-supply = <&vreg_l2d>; + + status = "okay"; +}; + +&usb_2_hsphy3 { + vdda-pll-supply = <&vreg_l10d>; + vdda18-supply = <&vreg_l8c>; + vdda33-supply = <&vreg_l2d>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l1b>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_2_qmpphy1 { + vdda-phy-supply = <&vreg_l8d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; }; &vamacro { @@ -1256,6 +1487,22 @@ bias-disable; }; + cam_rgb_default: cam-rgb-default-state { + mclk-pins { + pins = "gpio17"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + sc-rgb-xshut-n-pins { + pins = "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; @@ -1276,6 +1523,13 @@ bias-disable; }; + i2c11_default: i2c11-default-state { + pins = "gpio18", "gpio19"; + function = "qup11"; + drive-strength = <16>; + bias-disable; + }; + i2c21_default: i2c21-default-state { pins = "gpio81", "gpio82"; function = "qup21"; @@ -1322,15 +1576,15 @@ pins = "gpio143"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { - pins = "gpio145"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; pcie3a_default: pcie3a-default-state { @@ -1345,7 +1599,7 @@ pins = "gpio151"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { @@ -1368,7 +1622,7 @@ pins = "gpio141"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { @@ -1379,6 +1633,22 @@ }; }; + pm8008_default: pm8008-default-state { + int-pins { + pins = "gpio41"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-n-pins { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + spkr_1_sd_n_default: spkr-1-sd-n-default-state { perst-n-pins { pins = "gpio178"; @@ -1417,8 +1687,8 @@ reset-n-pins { pins = "gpio99"; function = "gpio"; - output-high; - drive-strength = <16>; + drive-strength = <2>; + bias-disable; }; }; |